TYPE F1: LED FESTOON LIGHTING AT EVENT SPACE, FIREPLACE AND ALLEYS
AT SYSTEMS POLES (F1A):
TIVOLI:
LSL-B-18-WW-F-12
WITH ADNM-320-4-5-12-D
WITH DIM-OT-1-5-D
QUANTITY = TO BE
CONFIRMED, ALLOW
1000FT
CAT:
LITESPHERETM
FEET:
LED
PROJECT:
TYPE:
Energy-efficient, low voltage LED strand using
wedge base LED lamps protected by clear,
frosted or colored polycarbonate globes.
FEATURES
LITESPHERE™
LITESPHERETM
LED
LED
ACCESSORIES
RECOMMENDED POWER SUPPLIES
WIRING ACCESSORIES
• Flexible 16ga cord available in Black or White with matching
g socket
• Socket is parallel wired and permanently fixed to cable
• Smooth 0% to 100% range dimming capability with commercially
ercially
available 0V-10V dimming protocol or magnetic and electronic
nic low
voltage dimmers (see page 4)
SPECIFICATIONS
LED DATA
WATTAGE LED LIFE / COLOR TEMP
0.48W per 40,000 hrs.
LED* Green or Blue
Litesphere LED
0.48W
Triple Chip LED
VIEWING
ANGLE
180°
REPLACEMENT GLOBES
LS-CG Clear
LS-FG Frosted
LS-YG Yellow
LS-RG Red
LS-OG Orange
LS-GG Green
LS-BG Blue
LS-PG Purple
100,000 hrs.
Red, or Yellow
40,000 hrs.
Warm White or White
*Ultra Bright Triple Chip LEDs operate at 52% of LED manufacturers maximum current
spec rating.
1. Spacing - Lamp spacing: 6", 12", 18", 24" OC or Custom lamp
spacing available - consult factory
2. LEDs - Uses 0.48W Triple Chip wedge-base LEDs lamps
3. LED Colors - Red, Yellow, Green, Blue, White and
Warm White
4. Globes - Shatterproof polycarbonate O-ring fitted globes,
protect lamps with clarity and seamless appearance available in
Clear, Frosted, Yellow, Red, Orange, Green, Blue and Purple
5. Socket - Socket is parallel wired and permanently fixed to cable
6. Socket Mounting - Socket has mounting holes for screw
attachment in under-eve applications
7. Cable Mounting - 1/8" stainless steel wire cable (by others) and
hanger clips for festoon applications
8. Channel Mounting* - Architectural Channel available for linear
or radius cut mounting (See next page)
31/8"
12
LSL
Litesphere
LED™
VOLTAGE
B = Black 06 = 6" OC
W = White 12 = 12" OC
18 = 18" OC
24 = 24" OC
BL = Blue
GR = Green
RD = Red
YL = Yellow
WH = White
WW = Warm
White
C = Clear
12 = 12V DC
F = Frosted
Y = Yellow
R = Red
O = Orange
G = Green
B = Blue
P = Purple
Z = Varied Colors*
ELECTRONIC OR DIMMABLE
AC MAGNETIC
(Y OR N)
ADNM-80-1-5-12-D
120-277V AC / 12V DC 60W / 1X5A
CULUS
12"W X 12"L X 4"D
Electronic
Y: F
120-277V AC / 12V DC 120W / 2X5A
CULUS
12”W X 12”L X 4”D
Electronic
Y: F
ADNM-240-3-5-12-D
120-277V AC / 12V DC 180W / 3X5A
CULUS
12”W X 12”L X 4”D
Electronic
Y: F
ADNM-320-4-5-12-D
120-277V AC / 12V DC 240W / 4X5A
CULUS
12”W X 12”L X 4”D
Electronic
Y: F
ADNM-240-1-15-12-D 120-277V AC / 12V DC 180W / 1X15A
CULUS
12”W X 12”L X 4”D
Electronic
Y: F
JT-60-1-5-12-D
120V AC / 12V DC
60W / 1X5A
CETLUS
4.25”W X 8.50”L X 3.25”D
Magnetic
Y: A, C & E
JTH-60-1-5-12-D
277V AC / 12V DC
60W / 1X5A
CETLUS
4.25”W X 8.50”L X 3.25”D
Magnetic
Y: B & D
JT-240-4-5-12-D
120V AC / 12V DC
240W / 4X5A
CETLUS
8.50”W X 16.00”L X 4.50”D Magnetic
Y: A, C & E
JTH-240-4-5-12-D
277V AC / 12V DC
240W / 4X5A
CETLUS
8.50”W X 16.00”L X 4.50”D Magnetic
Y: B & D
MW-80-1-5-12-D
120-277V AC / 12V DC 60W / 1X5A
UL/CE
7.75”W X 2.50”L X 1.63”D
Electronic
Y: F
MW-150-1-10-12-D
120-277V AC / 12V DC 120W / 1X10A
UL/CE
9.00”W X 2.75”L X 1.63”D
Electronic
Y: F
MW-240-1-15-12-D
120-277V AC / 12V DC 180W / 1X15A
UL/CE
9.75”W X 2.75”L X 1.63”D
Electronic
Y: F
MW-320-1-20-12-D
120-277V AC / 12V DC 240W / 1X20A
UL/CE
10.00”W X 3.63”L X 1.75”D Electronic
Y: F
CONTROL
SIGNAL
INPUT
VOLTAGE
OUTPUT
VOLTAGE
MAX
LOAD
BREAKER
RATING
DIMENSIONS
A
N-600
AC Magnetic
N/A
120V AC
120V AC
450W
N/A
Recessed Single Gang Box
B
NH-600
AC Magnetic
N/A
277V AC
277V AC
450W
N/A
Recessed Single Gang Box
LITESPHERE ARCHITECTURAL CHANNEL SERIES FOR OUTDOOR UPRIGHT INSTALLATIONS
C
N-1000
AC Magnetic
N/A
120V AC
120V AC
800W
N/A
Recessed Dual Gang Box
Example: AC-LS-B-06-WH-WW-F
D
NH-1000
AC Magnetic
N/A
277V AC
277V AC
800W
N/A
Recessed Dual Gang Box
E
N-1500
AC Magnetic
N/A
120V AC
120V AC
1200W
N/A
Recessed Dual Gang Box
F
DIM-OT-1-5-D Control Interface 0-10V DC
12V DC
12V DC
60W
5A*
7"L X 1½"W X ¾"H
WIRE
PRODUCT CODE
SOCKET
LAMP SPACING
FINISH
LED COLOR
REQUIRED
POWER SUPPLY
GLOBE COLOR
PSU
LS
LS = Litesphere B = Black
AC = Standard
Socket
Architectural
W = White
Channel
AM = Medium
Architectural
Channel
23/16"
Diameter
06 = 6" OC PA = Polished
Aluminum
12 = 12" OC
18 = 18" OC SA = Satin
Aluminum
24 = 24" OC
BK = Black
Powder Coat
WH = White
Powder Coat
BL = Blue
GR = Green
RD = Red
YL = Yellow
WH = White
WW = Warm
White
IP65
DIM-OT is a full range control interface that receives dimming signal from various controllers (0-10V DC).
Consult factory for more information.
See power
supply
specsheets
C = Clear
F = Frosted
Y = Yellow
R = Red
O = Orange
G = Green
B = Blue
P = Purple
Z = Varied Colors*
*DIM-OT applications require 1 each DIM-OT per 5 amp circuit
PRODUCT SPECIFICATION GUIDE
PROFILES
REQUIRED POWER
SUPPLY OPTIONS
Example: LSL-W-12-WW-F-12
GLOBE COLOR
DIMENSIONS
TYPE
1"
LITESPHERE LED ORDER SPECIFICATION GUIDE
LED COLOR
LISTING
DIMMER
1
LAMP SPACING
TOTAL WATTAGE /
AMPERAGE PER BREAKER
ADNM-150-2-5-12-D
SELECTOR
PROFILE
9. Power Supply - Listed Class I or Class II 12V DC power
supply required
10. Listing - cULus listed for indoor or outdoor Class I or Class II
applications
11. Weight - Litesphere product weighs 1.25 oz/ft (24” OC),
1.33 oz/ft (18” OC), 1.58 oz/ft (12” OC) & 2.05 oz/ft (6” OC)
12. Rating - IP65 Rated for outdoor use
13. Warranty - 3 Year Warranty
WIRE
REPLACEMENT LEDS
LSL-BL-F-12 0.48W, 12V Wedge base
Frosted LED - Blue
LSL-GR-F-12 0.48W, 12V Wedge base
Frosted LED - Green
LSL-RD-F-12 0.48W, 12V Wedge base
Frosted LED - Red
LSL-YL-F-12 0.48W, 12V Wedge base
Frosted LED - Yellow
LSL-WH-F-12 0.48W, 12V Wedge base
Frosted LED - White
LSL-WW-F-12 0.48W, 12V Wedge base
Frosted LED - Warm White
PRIMARY AND
SECONDARY
DIMMERS
*Outdoor building facade or upright socket mounting requires
Architectural Channel
PRODUCT CODE
LS-HANG-CLIP Hanger clip for installation from 8 gauge stainless steel aircraft
cable
LS-EC-BK Black end cap
LS-EC-WH White end cap
CAT NO
REQUIRED
POWER SUPPLY
PSU
See power
supply
specsheets
ADNM-80-1-5-12-D
ADNM-150-2-5-12-D
ADNM-240-3-5-12-D
ADNM-320-4-5-12-D
ADNM-240-1-15-12-D
JT-60-1-5-12-D
JTH-60-1-5-12-D
JT-240-4-5-12-D
JTH-240-4-5-12-D
MW-80-1-5-12-D
MW-150-1-10-12-D
MW-240-1-15-12-D
MW-320-1-20-12-D
OPTIONAL
DIMMERS
N-600
NH-600
N-1000
NH-1000
N-1500
DIM-OT-1-5-D
See dimming specification
sheet for more information
SPACING
WATTS PER
FOOT
PRODUCT MAX CIRCUIT LIMITATIONS
(FT/LED’S PER SECONDARY CIRCUIT)
MAX INTERCONNECTABLE
RUN LENGTHS
6” O.C.
.96W/ft
150’ 300 LEDs per 15A Class I circuit
57’ 115 LEDs per 5A Class II circuit
90’
57’
12” 0.C.
.48W/ft
300’ 300 LEDs per 15A Class I circuit
115’ 115 LEDs per 5A Class II circuit
150’
115’
18” O.C.
.36W/ft
450’ 300 LEDs per 15A Class I circuit
150’ 115 LEDs per 5A Class II circuit
150’
150’
24” O.C.
.24W/ft
600’ 300 LEDs per 15A Class I circuit
220’ 115 LEDs per 5A Class II circuit
150’
150’
/2"
1
1
/2"
2 /8 "
1¼"
ACLS SERIES ARCHITECTURAL CHANNEL: Required for outdoor
building facade or borderline upright mounting applications.
Shown with 2" x 2" channel, 2" x 1" channel also available.
1
1
2 /8"
2 /8"
STANDARD PROFILE CHANNEL MEDIUM PROFILE CHANNEL
For more detail, please see AC-LS Series specification sheet.
See power supply specifications
for more information
Copyright © 2014 Tivoli 08.26.14 - Page 1 of 3
Copyright © 2014 Tivoli 08.26.14 - Page 2 of 3
Copyright © 2014 Tivoli 08.26.14 - Page 3 of 3
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
TYPE F2: LINEAR LED TAPE LIGHT TO HIGHLIGHT HISTORIC BUILDING FACADE FEATURES
TokiLum
TOKISTAR
QUANTITY = TO BE
CONFIRMED, ALLOW 500FT
LED Driver
TokiLum™
Input Range: 100~240 VAC
Frequency Range: 50/60 Hz
Output: 6 VDC (Adjustable +40% / -5%)
Max. Output Current: 5.0A x 2 channels
Max. Output Power: 30W x 2 channels
Protection: Overload, Overcurrent, Short Circuit
Operating Temperature: -30ºC to +60ºC
Tokistar’s LDR6-60 is a 60 Watt UL Recognized
Class 2 LED Driver used to convert an AC
input into a 6 VDC output. It may be operated
from a wide range of input voltages. The
enclosure is suitable for wet locations.
T
okiLum uses high-output LEDs to provide
an indirect wash of light on building facades,
underneath step-nosings and from within very
shallow ceiling coves. In exposed applications,
the LEDs create distinct points of vibrant light.
0HFKDQLFDO6SHFLÀFDWLRQV
Dimensions: 3.6" x 11" x 2.25"
Weight: 4 lbs
Enclosure Rating: Nema 3/IP65
Mounting: Flange Mount
Connection: Knockouts for 1/2" Conduit
Compliance/Safety
TokiLum LED modules are tightly sealed within
an all-environment package and approved
for use in wet-location settings. The system
operates efficiently at 6 VDC. This lower
voltage produces very little heat, adding to
TokiLum’s reliability.
11"
(280 mm)
Code
50
100
Code
IW
WH
BL
0.71"
(18 mm)
0.48 Watt LEDs: 124 pieces
DMX Dimming System
LED
Spacing
2" (50 mm)
4" (100 mm)
TokiLum Capacity
Part #: LDR6-60
LED Dimmers
LUM - 50 - IW
LED Spacing
UL 1310 Class 2
CAN/CSA 22.2#9
EN60950
3.6"
(92 mm)
2.25"
(57 mm)
How to Specify
TokiLum is available in LED module
spacings of 2" and 4". LEDs can be
specified 3000K, 6500K or Blue.
6SHFLÀFDWLRQV
TokiLum is Wet-Location Listed
when operated from
our LED Drivers.
Kelvin
3000K
6500K
Blue
Watts/Volts
0.48 W / 6 VDC
0.48 W / 6 VDC
0.48 W / 6 VDC
1.14"
(29 mm)
0.32"
(8.2 mm)
Part #: LC-1CH-MULTI
Max. Load: 30 Watts @ 6 VDC
Environmental Rating: Dry Location/IP20
Dimensions: 3/4" x 1-3/4" x 3-1/2"
Weight: 50g / 0.11 lbs
Listing: ETL Listed/CE Certified
Operating Temperature: 0~+50ºC
Tokistar’s LC-1CH-MULTI Dimmer Pack is compatible
with industry-standard dimmers working on DMX or
0/1-10 VDC protocol.
DMX Mode - Each unit is independently addressable. Up to
36 dimmer packs may be connected in series. For applications
exceeding 36 dimmer packs, an additional feed from the DMX
dimmer is required. The additional feed(s) can be sent directly from
the dimmer, or you may specify DMX Splitters. Consult factory on
details of DMX Splitters.
Analog Modes - For operation from devices using 0/1-10VDC
protocol, up to 10 dimmer packs may be connected in series. For
applications exceeding 10 dimmer packs, an additional feed from the
analog dimming device is required.
Manual Mode - You may select a light intensity at which the fixtures
will operate. In this case, no external dimming device is required.
(MQQIV
(1<SV:('
0-6VDC
(MQQIV4EGO
(MQQIV4EGO
LED Driver
6VDC
6VDC
(EXE
(EXE
LC Dimming System
Fixture
0-6VDC
(EXE
This proprietary Dimming System provides full-range dimming of TokiLum LEDs. The system components connect
with CAT5 cable. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not
exceed 165 feet from the wall dimmer to the last dimmer pack. CAT5 cables are included with units.
Specifications
Part #: LC-DMR
All plastic components are resistant
to Ultraviolet Light in accordance
with standard UL 746C.
Flexible Conductors are #18 AWG
Light Sources are 0.48 Watt/6 VDC LEDs
Wet-Location
Listed
This product is protected under
U.S. and Foreign Patents.
LED Modules are permanently sealed to cable
Insulation is flexible PVC with flammability rating UL 94V-0
The remote wall dimmer has a rotary dial and on/off
switch. Power to the wall dimmer is provided from
the LED Driver powering the first Dimmer Pack. A
50 foot CAT5 cable is provided with each unit.
LC-DMR
Fixture
Signal Out
Signal Out
0-6VDC
Part #: LC-1CH-DP
Each dimmer pack receives one of the two 6 VDC
outputs from an LDR6-60 LED Driver. A CAT5
cable is provided with each unit.
Size: 1-1/2" x 3-1/2" x 4-1/16”"
(MQQIV4EGO
6VDC
6VDC
0-6VDC
(MQQIV4EGO
LED Driver
TOKISTAR ® LIGHTING INC.
TOKISTAR LIGHTING
&%JTDPWFSZ-BOFt"OBIFJN$"
2 | TOKISTAR LIGHTING
5FMt'BYt5PMMGSFFJO64"
&NBJMJOGP!UPLJTUBSDPNt8FCTJUFXXXUPLJTUBSDPN
© 2012 TOKISTAR LIGHTING INC. / V1.2
TOKISTAR:
LUM-50-IW-TRI-MT
WITH LDR6-60
WITH LC-ICH-MULTI
TYPE F3A: LED FLOOD LIGHT MOUNTED TO ‘SYSTEMS’ POLE FOR AMBIENT ILLUMINATION
IGUZZINI:
I.61-I.6149-I.BZE6
WITH POLE CLAMP
QUANTITY = 32
MAXIWOODY SYSTEM
design Mario Cucinella
71
SPECIFICATION SHEET
MAXIWOODY
#I.61
-120 - 15
COLOR
&OPTICS
COMPACT LED
LAMPING: 24 X 1,2W LED (SEE LED COLOR & OPTICS)
FINISH
The MAXIWOODY projector series is designed for
outdoor use where horizontal, vertical or spot distribution
is needed. These fixtures are very versatile and are
available with an ensemble of fittings and accessories.
PROJECT NAME:
TYPE:
QTY:
LAST UPDATE: MAY 08, 2012
GRADUATED SCALE
WITH 10° STEP
+/-115°
DIE-CAST ALUMINIUM
BODY
11-11/16"
(296mm)
ELECTRONIC
POWER SUPPLY
12'' SUPPLIED
POWER CORD
10-5/8"
(270mm)
SIDE VIEW
24 X 1,2W LED
(SEE COLOR & OPTICS)
(INDLUDED)
DIE-CAST ALUMINIUM
COVER WITH TEMPERED
GLASS (3/16”(4mm) THICK)
LENS AND SILICON
SEALING
10-1/4"
(260mm)
MultiWoody page 82
VANDAL RESISTANT
STAINLESS STEEL
ALLEN HEAD SCREW (X4,TYP)
PAINTED STEEL BRACKET
Public spaces increasingly demand
useful lighting to satisfy the technical
requirements of lighting without
disturbing the visual, perceptive and
design value of spaces and
architecture. The MultiWoody system
was created to produce light effects
on vertical surfaces. Exploiting the
flexibility of optics and accessories, the
multiple MaxiWoody assembly makes
it possible to express the lighting of
architecture in its own language,
defining the various elements, codes
and profiles in the most appropriate
terms.
ACCESSORIES
FRONT VIEW
(TO BE ORDERED SEPARATELY)
120V
VOLTAGE
IP 67
I.BZE6- PROTECTION GRID
IK 07
15 - GREY
METAL FINISH
I.BZE8- DIRECTIONAL FLAP
02 - BLACK
COLOR & OPTICS
I.BZE9- VISOR
I.6146 - 24 X 1,2W LED, NEUTRAL WHITE 4200K, SUPERSPOT - 6° (SS)
15 - GREY
I.6147 - 24 X 1,2W LED, WARM WHITE 3100K, SUPERSPOT - 6° (SS)
I.BZF0- GROUND FIXING SYSTEM
I.6148 - 24 X 1,2W LED, NEUTRAL WHITE 4200K, FLOOD - 32° (F)
I.6149 - 24 X 1,2W LED, WARM WHITE 3100K, FLOOD - 32° (F)
I.6150 - 24 X 1,2W LED, NEUTRA L WHITE 4200K, ASYMMETRICAL LONGITUDINAL (ALO)
I.6151 - 24 X 1,2W LED, WARM WHITE 3100K, ASYMMETRICAL LONGITUDINAL (ALO)
I.5951- GROUND ANCHORING FLANGE
15 - GREY
5455 de Gaspé
suite 100, Montréal (Québec)
Canada H2T 3B3
P.: 514.523.1339 F.: 514.525.6107
Pole not included.
MAXIWOODY
COMPACT LED
DUE TO CONTINUOUS IMPROVEMENTS, THE INFORMATION HEREIN MAY BE CHANGED WITHOUT NOTICE.
MH - R2
TYPE F3B: GOBO PROJECTOR MOUNTED TO ‘SYSTEMS’ POLE FOR PATTERN PROJECTION ON GROUND
WE-EF LIGHTING:
667-5762 FLC254-CC-EZ
WITH POLE CLAMP
FLC200 BL SERIES
QUANTITY = 2
aluminum alloy. 5CE superior corrosion protection including PCS hardware. Powdercoat
ProƂle projector with a twin aspheric convex lens system. IP66. Marine-grade, die-cast
Ƃnish in black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify Ƃnish.
Consult WE-EF color chart for other options. Clear tempered glass lens. Anodized alumi-
Profile projector for zoom, gobo or framing applications.
num reƃector. Silicone rubber gasket.
Integral [ECG] electronic CMH ballast in 120, 277 or 347 volt. Specify voltage.
FLC254-CC [BL] Version: CMY dichroic color changing Ƃlters for subtractive color mixing
„
Ordering guide:
MOUNTING ACCESSORIES – FLC200 SERIES
Light source:
CMH 70-150 W
Beam distributions:
[BL]-ZP, [BL]-GP, [BL]-FP
Surface mount canopy and multiple pole top brackets for FLC200 series yoke mounted
projectors. Marine-grade, all-aluminum construction. 5CE superior corrosion protection
including PCS hardware. Powdercoat Ƃnish in black RAL 9004, grey metallic RAL 9007
or white RAL 9016. Specify Ƃnish. Consult WE-EF color chart for other color options.
Accessories:
„
Mounting page 346-349
„
Optical page 350-351
Surface mounted canopy
UL, cUL:
„
SMC-200
(ø 10.83)/(ø 9.25)
7.0
for FLC260
683-9330
SMC-260
(ø 10.83)/(ø 9.25)
7.0
reset function and test programs „ storage of up to 99 scenes and 99 sequences, stor-
Multiple pole top brackets
H
D
E.P.A. Insert depth Pole top tenon
lbs
age of up to seven daily programs, or one weekly program „ stand alone function and
for (2) FLC230/240/250/254
667-9350
MPT-2-200 24.0
7.38
0.64
7.88
ø 4.0 x 7.88 long 17.0
master/slave function „ four cross fading sequences „ integrated calendar with timer
for (3) FLC230/240/250/254
667-9352
MPT-3-200 72.0
7.38
1.50
7.88
ø 4.0 x 7.88 long 39.0
for (4) FLC230/240/250/254
667-9354
MPT-4-200 48.0
7.38
1.07
7.88
ø 4.0 x 7.88 long 29.0
for (6) FLC230/240/250/254
667-9356
MPT-6-200 72.0
7.38
1.70
7.88
ø 4.0 x 7.88 long 39.0
for (2) FLC260
667-9351
MPT-2-260 24.0
7.38
0.64
7.88
ø 4.0 x 7.88 long 17.0
for (3) FLC260
667-9353
MPT-3-260 72.0
7.38
1.50
7.88
ø 4.0 x 7.88 long 39.0
for (4) FLC260
667-9355
MPT-4-260 48.0
7.38
1.07
7.88
ø 4.0 x 7.88 long 29.0
for (6) FLC260
667-9357
MPT-6-260 72.0
7.38
1.70
7.88
ø 4.0 x 7.88 long 39.0
terface „ WE-EF CONTROL CMY-DMX PC based software supplied.
Example: 667-5761 – 120 V – Black RAL 9004
lbs
683-9329
D
D1
Suitable for wet locations
function and integrated operation hour counter „ DMX/512 in-and output and RJ45 in-
Specify 7 digit part ID together with voltage and finish.
D/D1
for FLC230/240/250/254
ø 0.47
SMC
D
Multiple pole top conƂgurations of FLC200 series projectors on 'specially adapted WE-EF poles'. Assembly includes pole
top extension, pole clamps and pole top Ƃtter. Allows for projector to be rotated horizontally or vertically. Consideration
must be given by designer to assure adequacy of pole design. Pole design must meet all Ƃeld conditions, including
Distance (m)
Diameter (m)
10
3,6-4,7
20
7,2-9,5
5.51
30
10,5-14
[BL] – ZP
Part ID
Light source
FLC254-CC
667-5761
CMH150/T-6/G-12 base
lm
lbs
14000
55.0
ø 0.55
ø 0.87
H
wind zone, height, and loading. WE-EF is not responsible for compatibility for use with poles supplied by others.
ø 13.31 ø 6.50
Ordering guide:
22.91
Specify 7 digit part ID together with finish.
13.39
Example: 683-9329 – Black RAL 9004
1.73
MPT-2-200/260
ProƂle projector for zoom projection.
[BL] – GP
Part ID
Light source
FLC254-CC
667-5762
CMH150/T-6/G-12 base
lm
lbs
14000
55.0
D
Color changing proƂle projector for gobo projection onto a surface.
D
Gobo (D = 86 mm): Gobo can be either stainless steel or glass.
Gobo by others: Refer to www.rosco.com.
[BL] – FP
Part ID
Light source
FLC254-CC
667-5763
CMH150/T-6/G-12 base
lm
lbs
14000
55.0
D
Color changing proƂle projector for framing projection, polygon shape.
H
Accessories:
H
[DMX] – HH1 hand held programmer.
for FLC254-CC
667-9401
H
Including RS232 serial cable.
Individual programming via PC or the optional WE-EF handheld programmer:
- RS232 serial cable supplied with HH1 handheld
- Storage of up to 999 scenes and 999 sequences
- Storage of up to 99 daily, weekly, monthly or special day programs
- DMX interface.
MPT-3-200/260
Front de mer. Mers-les-Bains (F). Lighting design: Xavior Boymond, Frouzins.
344
342
348
MPT-4-200/260
MPT-6-200/260
TYPE F4: LED LANDSCAPE LIGHTS AT TREES
8 WATT
l DELTA STAR
DS
with
Specify Fixture Separately
TECHNOLOGY
PROJECT:
TYPE:
CATALOG
NUMBER:
CATALOG
NUMBER:
SOURCE:
LAMP(S):
NOTES:
NOTES:
CATALOG NUMBER LOGIC
Delta Star™ accentuates any architectural or landscape element. A one inch 45° or 90° lens
Narrow Spot
DS
cap minimizes glare and reduces aperture brightness. Delta Star™ operates on standard low
Example
voltage circuits. Keyword DS
PROJECT:
TYPE:
OPTICS
Sustainably manufactured from recycled copper-free aluminum, brass or stainless steel,
QUANTITY = 22
™
POWER PIPE™ SYSTEM
DELTA STAR™
F LO O D L I G H T S
BK LIGHTING:
DS-LED-E22-MFL-A9(FINISH)-11-B-360SL
WITH PP-A-12-B-(FINISH)-SF
WITH RM-D25INC-120(FINISH)
-
CATALOG NUMBER LOGIC
LED
DS
- LED - e22 -
SP
-
A7
- BZW -
12
-
11
-
A
- 360SL
PP
Spot
Example
Material
Blank - Aluminum
B - Brass
S - Stainless Steel
Medium Flood
B
-
PP
-
J
-
18
- T-L75E -
C
-
MIT
-
120
-
SF
Material
Blank - Aluminum
B - Brass
S - Stainless
Series
DS - Delta Star™
Series
Source
PP - Power Pipe™ System
LED - ‘e’ Technology with Integral Dimming Driver (25W min. load when dimmed)
Wide Flood
*Requires magnetic Low Voltage dimmer
LED Type
e36 - 8WLED/2.7K
e22 - 8WLED/3K
Rectilinear
CCT
NSP - Narrow Spot (Red Indicator)
SP - Spot (Green Indicator)
A
G
MFL - Medium Flood (Yellow Indicator)
WFL - Wide Flood (Blue Indicator)
*Not available with Transformer Housing
Power Pipe Length
B
Adjust-e-Lume® Output Intensity** (Choose factory setting)
MATERIAL
**Please see Adjust-e-Lume® photometry to determine desired intensity.
SS
Finish
Transformer Housing
Aluminum Finish
VOLTAGE
12V
12 - 12” Power Pipe Length
18 - 18” Power Pipe Length
A9 (Standard), A8, A7, A6, A5, A4, A3, A2, A1
ALU
BR
•
S - Stake
J - Junction Box
A - Adjustable 18" Stem* (requires 18" Power Pipe)
Optics*
3K 4K
R
Type
e23 - 8WLED/4K
e27 - 8WLED/Amber
•
Premium Finish
Brass Finish
Powder Coat Color
Satin
Wrinkle
Machined
MAC
Bronze
BZP
BZW
Polished
POL
Black
BLP
BLW
MitiqueTM
MIT
White (Gloss)
WHP
Stainless Finish
WHW
Aluminum
SAP
—
Verde
—
VER
Machined
MAC
Polished
POL
BRU
Brushed
Interior use only.
ABP
Antique Brass Powder
CMG
Cascade Mountain Granite
RMG
Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
Cracked Ice
SDS
Sonoran Desert Sandstone
AQW Antique White
CRM
Cream
SMG
Sierra Mountain Granite
BCM
Black Chrome
HUG
Hunter Green
TXF
Textured Forest
BGE
Beige
MDS
Mojave Desert Sandstone
WCP
Weathered Copper
BPP
Brown Patina Powder
NBP
Natural Brass Powder
WIR
Weathered Iron
CAP
Clear Anodized Powder
OCP
Old Copper
Blank - Less Transformer
T-L75E - Transformer housing with 75VA Electronic Transformer*
T-TRe20 - Transformer housing with TRe20 Electronic Transformer* (105-300 VAC. 50/60 Hz. Non-Dimming . For use with
Cap Style
Blank - Less Cap (Adjustable Stem only)
B - Single Hole Cap
C - Solid Cap
Finish
Aluminum Finish
Also available in RAL Finishes
See submittal SUB-1439-00
Satin
Wrinkle
Machined
MAC
Bronze
BZP
BZW
Polished
POL
Black
BLP
BLW
MitiqueTM
MIT
White (Gloss)
WHP
WHW
Aluminum
SAP
—
Verde
—
VER
13 - Rectilinear Lens
Shielding
2 1/4"
(57mm)
11 - Honeycomb Baffle
Cap Style
7"
(178 mm)
A - 45°
B - 90°
D -
45° less Weep Hole
E -
( Interior Use Only)
Option
90° less Weep Hole
Premium Finish
Brass
Powder Coat Color
Lens Type
12 - Soft Focus Lens
( Interior Use Only)
ABP
Stainless
Machined
Input Volts
9$&'&+]
InRush Current
$QRQGLPPHG
Dimmable
0DJQHWLF/RZ9ROWDJH'LPPHU
LM79 DATA
Shown with ‘A’ Cap
in Black Wrinkle (BLW) finish
BK No.
H
e22
H
e27
‘A/D’ CAP
1 5/8"
(41mm)
‘B/E’ CAP
L70 DATA
Input Watts
CCT (Typ.)
2700K
.
.
$PEHUQP
7.9
B-K LIGHTING
W W W. B K S S L . CO M
13
Beam Type
1DUURZ6SRW
6SRW
0HGLXP)ORRG
:LGH)ORRG
70% of initial lumens (L70)
%ULFN\DUG'ULYH‡0DGHUD&$‡86$
‡)$;
ZZZENOLJKWLQJFRP‡LQIR#ENOLJKWLQJFRP
Angle
ƒ
ƒ
ƒ
ƒ
Visual Indicator
Red Dot
Green Dot
Yellow Dot
%OXH'RW
SUBMITTAL DATE
DRAWING NUMBER
1-8-14
SUB000930
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
CMG
Cascade Mountain Granite
RMG
Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
Cracked Ice
SDS
Sonoran Desert Sandstone
AQW Antique White
CRM
Cream
SMG
Sierra Mountain Granite
BCM
Black Chrome
HUG
Hunter Green
TXF
Textured Forest
BGE
Beige
MDS
Mojave Desert Sandstone
WCP
Polished
POL
BRU
Brushed
Interior use only.
Weathered Copper
BPP
Brown Patina Powder
NBP
Natural Brass Powder
WIR
Weathered Iron
CAP
Clear Anodized Powder
OCP
Old Copper
Also available in RAL Finishes
See submittal SUB-1439-00
Input Voltage
Blank
120
230
277
*OPTICAL DATA
Minimum Rated Life (hrs.)
CRI (Typ.)
90
90
75
~
(Typ.)
Operation Ambient Temperature
ƒ)ƒ)
Antique Brass Powder
MAC
360SL - 360SL™ Rotational Knuckle Mounting System
DRIVER DATA
fixtures)
*Not available with Adjustable Stem (Type ‘A’)
-
Less Transformer or For use with TRe20 Electronic Transformer (105-300 VAC. 50/60 Hz. Non-Dimming)
120 VAC Input (For use with L75E )
230 VAC Input (Non-Dimming, For use with L75E )
277 VAC Input (Non-Dimming, For use with L75E )
Options
SF - Stability Flange
B-K LIGHTING
%ULFN\DUG'ULYH‡0DGHUD&$‡86$
‡)$;
ZZZENOLJKWLQJFRP‡LQIR#ENOLJKWLQJFRP
SUBMITTAL DATE
DRAWING NUMBER
8-15-13
SUB-1104-07
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
TYPE F5: SURFACE MOUNTED LED DOWNLIGHT AT STAGE CANOPY
BK LIGHTING:
SM-DE-LED-X25-WFL(FINISH)-12-11-E
WITH RM-D25INC-120(FINISH)
DENALI™
DENALI SURFACE
DOWNLIGHT
OPTICS
QUANTITY = 7
™
l
NEMA 3R Remote Driver Housing
SURFACE DOWNLIGHT
PROJECT:
PROJECT:
Constant Current Driver
4.%&
TYPE:
TYPE:
8"55t77
CATALOG
NUMBER:
CATALOG
NUMBER:
LAMP(S):
SOURCE:
Does your next project call for a fixture that truly makes a statement? Look no further than the
NOTES:
NOTES:
Denali Surface Downlight™. This architectural surface mounted product, now available with
BKSSL™ ‘X’ technology, is designed to effectively illuminate a vast array of exterior and interior
SM
spaces. Select from three cap styles for complete lighting control. Visit www.bklighting.com
Flood
CATALOG NUMBER LOGIC
CATALOG NUMBER LOGIC
Spot
Example
SM
DE
-
LED
DE
-
RM
Configure Driver Housing Separately
LED
-
x25
-
WFL
-
BZP
-
12
-
11
-
Example
Driver Housing Required
C
REMOTE DRIVER HOUSINGS:
PM2RM - Universal Power Module 2 Remote
PM2DRM - Universal Power Module 2 Dual Remote
RM - Remote Wall Mount
DRM - Dual Remote Wall Mount
for ordering logic. Keyword SM-DE-LED
Series
SM - Surface Downlight
Wide Flood
-
REMOTE WIRING
SAP
LED Driver
Remote driver installations require inter-connected
wiring between the LED and driver (by others).
Drivers have specific wiring requirements between
these components. Driver manufacturers regularly
recommend the following wiring details for such
installations:
7POMZ
t %POPUFYDFFEGPPUPWFSBMMXJSJOHEJTUBODF
VTJOHHBVHFDPQQFSXJSF
D25 8%SJWFS (non-dimming)
D25INC 8%JNNJOH%SJWFSGPSVTFXJUI*ODBOEFTDFOU%JNNFS
LED - ‘X’ Module with Cold Phosphor Technology
2.7K
7POMZ
Failure to comply with specific wiring
requirements will void product warranty.
LED Type
x21 - 15WLED/2700K
x22 - 15WLED/3000K
x23 - 15WLED/4000K
MATERIAL
ALU
x24
x25
x26
- 25WLED/2700K
- 25WLED/3000K
- 25WLED/4000K
Input Voltage
120 7"$*OQVUGPSVTFXJUI%*/$BOE%*/$POMZ
MT 7"$*OQVU
Optics
Finish
VOLTAGE
ARCHITECTURAL SURFACE
MT
D15 8%SJWFS (non-dimming)
D15INC 8%JNNJOH%SJWFSGPSVTFXJUI*ODBOEFTDFOU%JNNFS
Source
4K
-
Driver Type
3K
D25
RM 3FNPUF.PVOU/&."3
DE - Denali™ Floodlight
CCT
-
Remote Driver Housing
Fixture
Rectilinear
RM
t 7 t
t
Standard Finish
SP - Spot (20°)
FL - Flood (40°)
WFL - Wide Flood (60°)
Finish
Standard Finish
Shown with ‘C Cap
in White Satin (WHP) finish
Premium Finish
Powder Coat Color
Satin
Wrinkle
Bronze
BZP
BZW
Black
BLP
BLW
White (Gloss)
WHP
WHW
Aluminum
—
SAP
—
Verde
ABP
CMG
Cascade Mountain Granite
RMG
Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
Cracked Ice
SDS
Sonoran Desert Sandstone
AQW Antique White
CRM
Cream
SMG
Sierra Mountain Granite
BCM
HUG
Hunter Green
TXF
Textured Forest
BGE
BPP
VER
CAP
Antique Brass Powder
Black Chrome
Beige
Brown Patina Powder
Clear Anodized Powder
MDS
NBP
Mojave Desert Sandstone
Natural Brass Powder
OCP
WCP
WIR
Premium Finish
Powder Coat Color
Satin
Wrinkle
MDS
Mojave Desert Sandstone
Bronze
BZP
BZW
ABP
AMG Aleutian Mountain Granite
NBP
Natural Brass Powder
Black
BLP
BLW
AQW Antique White
OCP
Old Copper
White (Gloss)
WHP
WHW
BCM
Black Chrome
RMG
Rocky Mountain Granite
Aluminum
SAP
—
BGE
Beige
SDS
Sonoran Desert Sandstone
Verde
—
VER
5"
(127mm)
3/8"
(10mm)
‘D’ CAP
10
- Spread Lens*
Brown Patina Powder
SMG
Sierra Mountain Granite
Clear Anodized Powder
TXF
5FYUVSFE'PSFTU
CMG
Cascade Mountain Granite
WCP
Weathered Copper
CRI
Cracked Ice
WIR
Weathered Iron
CRM
Cream
HUG
Hunter Green
Weathered Iron
Lens Type
9 - Clear (Standard)
BPP
CAP
Weathered Copper
Also available in RAL Finishes
See submittal SUB-1439-00
Old Copper
Antique Brass Powder
12 - Soft Focus Lens*
13
-
Also available in RAL Finishes
See submittal SUB-1439-00
Rectilinear Lens*
Shielding
11 - Honeycomb Baffle*
*Accommodates up to 2 Lens/Shielding media
Cap Style
7 3/16"
(183mm)
C - Flush
D - 45° without Weep Hole
E - 90° without Weep Hole
‘E’ CAP
DRIVER ELECTRICAL DATA
3" Dia.
(76mm)
‘C’ CAP
DRIVER HOUSINGS:
BK No.
CCT
(Typ.)
CRI
(Ra. Typ.)
Color Consistency
W W W. B K S S L . CO M
DRM/RM
PM2RM
PM2DRM
Input Watts (Typ.)
Minimum Rated Life (hrs.)
70% of initial lumens (L70)
Beam Type
Angle
x21
2700K
>80
±40K
15
50,000
Spot
20°
x22
3000K
>80
±50K
15
50,000
Flood
40°
x23
4000K
>80
±70K
15
50,000
Wide Flood
60°
x24
2700K
>80
±40K
25
50,000
x25
3000K
>80
±50K
25
50,000
x26
4000K
>80
±70K
25
50,000
B-K LIGHTING
92
OPTICAL DATA
L70 DATA
LM79 DATA
%ULFN\DUG'ULYH‡0DGHUD&$‡86$
‡)$;
ZZZENOLJKWLQJFRP‡LQIR#ENOLJKWLQJFRP
SUBMITTAL DATE
DRAWING NUMBER
6-23-14
SUB001227
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
TYPE
AC INPUT
RANGE
Frequency
Hz
DIMMING
POWER
FACTOR
THD
OPER. AMBIENT
TEMPERATURE
DIMMER TYPE
D15
120/208/240/277
50/60
NO
>0.92
”
ƒ&aƒ&
—
—
',1&
120
50/60
YES
>0.96
”
ƒ&aƒ&
Incandescent
D25
120/208/240/277
50/60
NO
>0.92
”
ƒ&aƒ&
—
—
',1&
120
50/60
YES
>0.96
”
ƒ&aƒ&
Incandescent
SUBMITTAL DATE
DRAWING NUMBER
12-21-12
SUB001124
B-K LIGHTING
%ULFN\DUG'ULYH‡0DGHUD&$‡86$
‡)$;
ZZZENOLJKWLQJFRP‡LQIR#ENOLJKWLQJFRP
DIMMER RANGE
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
TYPE F6: LED FLOOD LIGHT MOUNTED TO POLE AT FUTURE KIOSK AREA AND SOUTH SEATING AREA
71
design Mario Cucinella
SPECIFICATION SHEET
MAXIWOODY
#I.61
-120 - 15
COLOR
&OPTICS
COMPACT LED
QUANTITY = 2
8' to 20' ROUND NON-TAPERED
ALUMINUM
Hinged Base
MAXIWOODY SYSTEM
LAMPING: 24 X 1,2W LED (SEE LED COLOR & OPTICS)
FINISH
Job Name:
Client Name:
Job Location - City:
The MAXIWOODY projector series is designed for
outdoor use where horizontal, vertical or spot distribution
is needed. These fixtures are very versatile and are
available with an ensemble of fittings and accessories.
PROJECT NAME:
State:
Product:
TYPE:
Quote:
LAST UPDATE: MAY 08, 2012
SPECIFICATIONS
3ROH - The pole shaft is extruded from seamless alloy aluminum.
GRADUATED SCALE
WITH 10° STEP
3ROH7RS - A pole top tenon is provided for top mount luminaire and/or
bracket. A removable pole cap is available for poles receiving drilling patterns for
side-mount luminaire arm assemblies.
DIE-CAST ALUMINIUM
BODY
+DQGKROH - An optional covered handhole with hardware and grounding
provision are available upon request.
ELECTRONIC
POWER SUPPLY
%DVH&RYHU - Optional decorative base covers available as special order.
&URVV6HFWLRQ
$QFKRU%DVH - The hinged anchor base is cast from 356 alloy aluminum. The
completed assembly is heat-treated to a T6 temper. Aluminum 2-piece cover
is included with anchor base unless otherwise specified.
12'' SUPPLIED
POWER CORD
10-5/8"
(270mm)
$QFKRU%ROWV - Anchor bolts conform to ASTM F1554 Grade 55 and are
provided with two hex nuts and two flat washers. Bolts have an “L” bend on
one end and are galvanized a minimum of 12” on the threaded end.
+DQGKROH
2SWLRQDO
DIE-CAST ALUMINIUM
COVER WITH TEMPERED
GLASS (3/16”(4mm) THICK)
LENS AND SILICON
SEALING
Nominal Mounting Height
24 X 1,2W LED
(SEE COLOR & OPTICS)
(INDLUDED)
MultiWoody page 82
'HVLJQ&ULWHULD - Please reference Design Criteria Specification for appropriate
design conditions.
+LQJHG%DVH
VANDAL RESISTANT
STAINLESS STEEL
ALLEN HEAD SCREW (X4,TYP)
PAINTED STEEL BRACKET
Public spaces increasingly demand
useful lighting to satisfy the technical
requirements of lighting without
disturbing the visual, perceptive and
design value of spaces and
architecture. The MultiWoody system
was created to produce light effects
on vertical surfaces. Exploiting the
flexibility of optics and accessories, the
multiple MaxiWoody assembly makes
it possible to express the lighting of
architecture in its own language,
defining the various elements, codes
and profiles in the most appropriate
terms.
ACCESSORIES
FRONT VIEW
(TO BE ORDERED SEPARATELY)
120V
VOLTAGE
IP 67
I.BZE6- PROTECTION GRID
IK 07
15 - GREY
METAL FINISH
I.BZE8- DIRECTIONAL FLAP
02 - BLACK
COLOR & OPTICS
I.BZE9- VISOR
I.6146 - 24 X 1,2W LED, NEUTRAL WHITE 4200K, SUPERSPOT - 6° (SS)
15 - GREY
I.6147 - 24 X 1,2W LED, WARM WHITE 3100K, SUPERSPOT - 6° (SS)
I.BZF0- GROUND FIXING SYSTEM
I.6148 - 24 X 1,2W LED, NEUTRAL WHITE 4200K, FLOOD - 32° (F)
I.6149 - 24 X 1,2W LED, WARM WHITE 3100K, FLOOD - 32° (F)
I.6150 - 24 X 1,2W LED, NEUTRA L WHITE 4200K, ASYMMETRICAL LONGITUDINAL (ALO)
I.6151 - 24 X 1,2W LED, WARM WHITE 3100K, ASYMMETRICAL LONGITUDINAL (ALO)
I.5951- GROUND ANCHORING FLANGE
15 - GREY
5455 de Gaspé
suite 100, Montréal (Québec)
Canada H2T 3B3
P.: 514.523.1339 F.: 514.525.6107
Pole not included.
5RXQG+LQJHG%DVH
MAXIWOODY
COMPACT LED
DUE TO CONTINUOUS IMPROVEMENTS, THE INFORMATION HEREIN MAY BE CHANGED WITHOUT NOTICE.
MH - R2
VA LMONT INDUS TRIE S , INC.
28800 IDA S TRE E T, P O B OX 358 - VA LLE Y, NE 68064 US A
800.825.6668
VA LMONTS TRUCTURES.COM
TYPE F7: LED TAPE LIGHT IN CHANNEL MOUNTED UNDER STONE CAP AT ‘SIGNAGE’ WALLS
TIVOLI:
TPL-SB-3.0-O-30-C-24
WITH TPL-I-MCHAN-8
WITH ADNM-120-1-4-24-D
WITH DIM-OT-1-4-D
QUANTITY = TO BE
CONFIRMED, ALLOW 100FT
CAT:
TIVOTAPETM OUTDOOR SB
FEET:
TYPE:
STANDARD BRIGHTNESS
PROJECT:
Static IP68 LED tape light strip emits sharp,
pure color for unique effects in outdoor
niche, cove and architectural applications
FEATURES
• Flexible flat conductor strip with closely spaced LEDs encased
in rectangular IP68 molded jacket allows for wide range
of installation possibilities
• Ideal for exterior cove, under-bar/cabinet, landscape lighting accents
• Sold per foot manufactured in continuous lengths and shipped
manufactured to specified lengths with factory attached end preps
• Max continuous lengths: up to 22’ per run
• Smooth 0% to 100% range dimming capability with commercially
available 0V-10V dimming protocol or MLV (magnetic) and ELV
(electronic) low voltage dimming control. (See page 4)
TIVOTAPETM OUTDOOR SB
TIVOTAPETM OUTDOOR SB
STANDARD BRIGHTNESS
STANDARD BRIGHTNESS
WIRING END PREP OPTIONS
RECOMMENDED POWER SUPPLIES
TPL-SB-3.0-O-LEAD-C
L
Lead/Dead End
24” 2 conductor 18ga jacketed lead wire
factory attached to one end of tape with
field trimmable dead end at other.
Sold per each.
PL
TPL-SB-3.0-O-LEAD-D
Lead/Lead
24” 2 conductor 18ga jacketed lead wire
factory attached to both ends of tape.
Sold per each.
TPL-SB-3.0-O-CONN 18ga UL wet listed
butt connectors. Used to interconnect
factory attached lead wires. Sold per each
(2 each required per connection).
TPL-SB-3.0-O-XEP Extra lead wire
Additional factory attached jacketed lead
wire to extend lengths of LEAD-C and
LEAD-D up to 20ft max. Sold per foot (not
shipped as spooled wire).
MOUNTING ACCESSORIES
CAT NO
APPLICATION
ADNM-120-1-4-24-D
ADNM-240-2-4-24-D
ADNM-320-3-4-24-D
JT-100-1-4-24-D
JTH-100-1-4-24-D
JT-300-3-4-24-D
JTH-300-3-4-24-D
MT-100-1-24-DD
MW-120-1-4-24-D
Outdoor
Indoor/
Outdoor
PRIMARY AND
SECONDARY VOLTAGE
TOTAL WATTAGE /
AMPERAGE PER BREAKER
LISTING
DIMENSIONS
ELECTRONIC OR
AC MAGNETIC
DIMMABLE
(Y OR N; TYPE)
120-277V AC / 24V DC
120-277V AC / 24V DC
120-277V AC / 24V DC
120V AC / 24V DC
277V AC / 24V DC
120V AC / 24V DC
277V AC / 24V DC
120-240, 277V AC
120-277V AC / 24V DC
96W / 1X4A
192W / 2X4A
288W / 3X4A
96W / 1X4A
96W / 1X4A
288W / 3X4A
288W / 3X4A
96W / 1X4A
96W / 1X4A
CULUS
CULUS
CULUS
CETLUS
CETLUS
CETLUS
CETLUS
CULUS
UL/CE
12.00”W X 12.00”L X 4.00”D
12.00”W X 12.00”L X 4.00”D
12.00”W X 12.00”L X 4.00”D
4.25”W X 11.00”L X 4.00”D
4.25”W X 11.00”L X 4.00”D
8.50”W X 16.00”L X 4.50”D
8.50”W X 16.00”L X 4.50”D
8.50”W X 16.00”L X 4.50”D
8.66”W X 2.67”L X 1.53”D
Electronic
Electronic
Electronic
Magnetic
Magnetic
Magnetic
Magnetic
Electronic
Electronic
Y: F
Y: F
Y: F
Y: A, C & E
Y: B & D
Y: A, C & E
Y: B & D
Y: SELF DIMMING
Y: F
SPECIFICATIONS
TIVOTAPE SB 3.0 WATT
OUTDOOR TAPELIGHT
EFFICACY
LM/WT
CRI
LM/FT
WT/FT
Delux Warm White 2400°K
55.00
75.7
165
3.0
Delux Warm White 2700°K
47.34
79.4
142
3.0
Warm White 3000°K
49.00
80.5
147
3.0
Neutral White 3500°K
57.34
79.8
172
3.0
DIMMERS
Items in bold denote Title 24 High efficacy rating. Measurements are
based on 24V DC power design calculations will vary based on power
supply and run lengths
LED DATA
WATTAGE LED LIFE* / COLOR TEMP
Tivotape SB 3.0
Outdoor Tapelight
VIEWING
ANGLE
0.085W 40,000 hrs
per LED Delux Warm White 2400°K +/-100°K
Delux Warm White 2700°K +/-100°K
Warm White 3000°K +/-100°K
Neutral White 3500°K +/-100°K
TPL-I-MCHAN-8 Mounting Channel
Clear Polycarbonate in 8’ lengths.
Can be used as Tivotape Mounting
Channel with tape mounted directly
PROFILES
120°
21⁄64"
TPL-O-45-MCH-8 Tivotape 45˚ Mounting
Channel. White PVC in 8’ length
5/16"
3/4"
11/16"
*LEDs operate at 70% of LED manufacturers maximum current spec
TPL-INF-C-CHAN-8 Clear
TPL-INF-F-CHAN-8 Frosted
Infinity Mounting Channel
8’ standard lengths, two piece
channel is recommended for uneven
mounting surfaces or for adding
protection from physical access.
TPL-INF-EC Infinity Channel End Cap
3⁄16"
rating
21⁄64"
1. Spacing−LED spacing: 21/64” OC
5/8"
2. LEDs−36 LEDs per foot
3. Mounting−Includes installation-ready 3M tape adhesive for
simplified installation directly to mounting channel or application surface
7⁄16"
NOTE: Reverse channels for Outdoor Tivotape™.
Install Tivotape™ in Cover Channel.
5/16"
1/2"
Cover for Outdoor
Base for Outdoor
IP68
TIVOTAPE SB 3.0 OUTDOOR TAPELIGHT ORDER SPECIFICATION GUIDE
EXAMPLE: TPL-SB-3.0-O-24-C-24
TPL
–
SB
–
3.0
INSTALL
–
O
LED COLOR
–
CONTROL
SIGNAL
INPUT
VOLTAGE
OUTPUT
VOLTAGE
MAX
LOAD
BREAKER
RATING
DIMENSIONS
A
N-600
AC Magnetic
N/A
120V AC
120V AC
450W
N/A
Recessed Single Gang Box
B
NH-600
AC Magnetic
N/A
277V AC
277V AC
450W
N/A
Recessed Single Gang Box
C
N-1000
AC Magnetic
N/A
120V AC
120V AC
800W
N/A
Recessed Dual Gang Box
D
NH-1000
AC Magnetic
N/A
277V AC
277V AC
800W
N/A
Recessed Dual Gang Box
E
N-1500
AC Magnetic
N/A
120V AC
120V AC
1200W
N/A
Recessed Dual Gang Box
F
DIM-OT-1-4-D
Control Interface
0-10V DC
24V DC
24V DC
96W
4A*
7"L X 1½"W X ¾"H
DIM-OT is a full range control interface that receives dimming signal from various controllers (0-10V DC).
Consult factory for more information.
*DIM-OT applications require 1 each DIM-OT per 4 amp circuit
LIGHT
MAX CONTINUOUS
SOURCE
RUN LENGTH*
All color temperatures 22 ft
*Max continuous run based on 3.0A max load
TIVOLI
24V DC
POWER
SUPPLY
MTBF
8. Listing−cETLus listed file #4008134
9. Compliance−ROHS compliant
10. Warranty−3 year warranty
WATTAGE
TYPE
PRODUCT SPECIFICATION GUIDE
ALUMINUM CHANNELS WITH BASE AND COVER (FOR DAMP WEATHER PROTECTED AREAS ONLY)
5. End Preps−Factory attached end preps available (see Page 2)
6. Field Trimmable−2” cuttable sections (See page 3 for cut zones)
7. Power Supply−Listed Class II 24V DC power supply required
INTENSITY
DIMMER
5/8"
4. Installation−Optional clear Polycarbonate and Aluminum Channels
(for damp weather protected areas only) may be used separately or
with decorative, protective covers
PRODUCT
CODE
SELECTOR
CONTINUOUS
–
C
REQUIRED
POWER SUPPLY
VOLTAGE
24
TivotapeTM SB=Standard
3.0 =3.0 watts O=Outdoor 24 = Delux Warm White C = Continuous 24=24V DC
Brightness
per foot
IP66
(2400°K +/-100°K)
27 = Delux Warm White
(2700°K +/-100°K)
30 = Warm White
(3000°K +/-100°K)
35 = Neutral White
(3500°K +/-100°K)
+
PSU
See power supply
& dimmer selection
guide on page 4
REQUIRED POWER
SUPPLY OPTIONS
ADNM-120-1-4-24-D
ADNM-240-2-4-24-D
ADNM-320-3-4-24-D
JTH-100-1-4-24-D
JTH-100-1-4-24-D
JT-300-3-4-24-D
JTH-300-3-4-24-D
MT-100-1-4-24-D
MW-120-1-4-24-D
OPTIONAL
DIMMERS
N-600
NH-600
N-1000
NH-1000
DIM-OT-1-4-D
TPL-AL-CHAN-1-6 AL Series Aluminum
Channel with Mounting Carrier Base and
Domed Lens. Available in 6 ft standard lengths.
TPL-AL-CHAN-1-EC1 End Cap with no hole
TPL-AL-CHAN-1-EC2 End Cap with hole
TPL-AL-CHAN-1-LNSC Lens, Clear
TPL-AL-CHAN-1-LNSF Lens, Frosted
TPL-AL-CHAN-1-LNSO Lens, Opal
TPL-AL-CHAN-2-6 AL Series 45°
Aluminum Channel with Narrow Lens.
Available in 6 ft standard lengths.
TPL-AL-CHAN-2-MCLP Mounting Clip
TPL-AL-CHAN-2-EC1 End Cap with no hole
TPL-AL-CHAN-2-EC2 End Cap with hole
TPL-AL-CHAN-2-LNSC Lens, Clear
TPL-AL-CHAN-2-LNSF Lens, Frosted
TPL-AL-CHAN-2-LNSO Lens, Opal
See power dimming
specifications for
more information
TPL-AL-CHAN-3-6 AL Series small square
profile Aluminum Channel with Flush Lens.
Available in 6 ft standard lengths
TPL-AL-CHAN-3-MCLP Mounting Clip
TPL-AL-CHAN-3-EC1 End Cap with no hole
TPL-AL-CHAN-3-EC2 End Cap with hole
TPL-AL-CHAN-3-LNSC Lens, Clear
TPL-AL-CHAN-3-LNSF Lens, Frosted
TPL-AL-CHAN-3-LNSO Lens, Opal
TPL-AL-CHAN-4-6 AL Series Recessed
Profile Aluminum Channel with Flush Lens.
Available in 6 ft standard lengths.
TPL-AL-CHAN-4-EC1 End Cap with no hole
TPL-AL-CHAN-4-EC2 End Cap with hole
TPL-AL-CHAN-4-LNSC Lens, Clear
TPL-AL-CHAN-4-LNSF Lens, Frosted
TPL-AL-CHAN-4-LNSO Lens, Opal
Mean Time Between Failures (MTBF) for LEDs: While Tivoli
utilizes LEDs provided by industry leading vendors, these are electrical
components with calculated manufacturers mean time between failures
(MTBF). MTBF is rated
as the average point at which ½ of color LEDs will lose 50% of their
original brightness. MTBF for White LEDs is based on when ½ are
reduced to 70% of their original brightness.
Primary
Wiring
Input
Typically, LED product failures occur within fixture construction,
interdependent component failure, or operation under adverse conditions.
Tivoli operates LEDs at a derated current to insure that LED MTBF values
are based on product fixture construction and real application standards.
Still, conditions such as excessive voltage, vibration, heat, and other
adverse conditions may negatively effect the life of LEDs.
Standard UL
listed J-Box
by Others
1
2
/”
3
/4”
1
5
/8”
See power supply specifications
for more information
1
/2”
/2”
Wiring from
Transformer to
J-Box must be to
Class II standards.
Refer to NEC
and local code
requirements.
Tivotape
7
5
/8”
7
/16”
/16”
Copyright © 2014 Tivoli 08.22.14− Page 1 of 4
Copyright © 2014 Tivoli 08.22.14− Page 2 of 4
Copyright © 2014 Tivoli 08.22.14− Page 4 of 4
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
8' to 20'
)LQLVK - The standard finish for the pole assembly and components is satin
brushed, natural anodize, duranodic or polyester powder applied coating in accordance with Valmont’s Specifications. Additional finish options available upon
request.
SIDE VIEW
10-1/4"
(260mm)
Date:
RNTA / Hinged Base
+/-115°
Date:
Customer Approval:
QTY:
7HQRQ7RS
11-11/16"
(296mm)
Created By:
Poles - Aluminum
IGUZZINI:
(4) I.61-I.6149-I.BZE6
WITH VALMONT POLE
R200060606SH-(FINISH)
TYPE F8 OPTION 1: DECORATIVE LED POST TOP AREA LIGHT
LANDSCAPE FORMS:
ALCOTT - TYPE 5 - (FINISH)
Alcott
QUANTITY = 15
Type 3
Type 5
Structure: Housing and cabinet are cast
Structure: Housing and cabinet are cast
aluminum, pole is aluminum extrusion.
aluminum, pole is aluminum extrusion.
Lamp: 48 Cree XP-E
Lamp: 96 Cree XP-E
TM21 L70 Life: 60,500 hours
TM21 L70 Life: 60,500 hours
Drive Current: 350mA
Drive Current: 350mA
Optic: Proprietary Awen™ Optic
Optic: Proprietary Awen™ Optic
Lens: Diffused
Lens: Diffused
Power Supply: 110V-277V
Power Supply: 110V-277V
LED Driver: 1 Dimmable TRC-075S210DT
LED Driver: 2 Dimmable TRC-075S210DT
BUG Rating: B0U1G1
BUG Rating: B2U1G1
IP Rating: IP66
IP Rating: IP66
Weight: 170 lbs (complete assembly)
Weight: 170 lbs (complete assembly)
21"
144"
12"
Alcott Pedestrian
Lighting Dimensions
General Description
Pedestrian light for outdoor walkways. Light is highly
Concord
designed using state-of-the-art LED lamp technology.
Durable cast aluminum LED lamp housing sealed with
Designed by Robert A.M. Stern Architects
thermoformed lens works with the integrated pole to
provide outstanding heat management. Sealed housing
uses the latest LED technology and improves lamp life
Greater energy efficiency:
LED’s use less energy,
consume fewer resources
by using more LED’s driven with less current; may be
removed for servicing. Diffused lens technology provides exceptional performance against glare as evident
in the BUG rating. A warm white 3,500°K lamp color was
Better color:
Warm white light supports
ecology and human health
chosen for its warm aesthetic and ecological benefits.
Electrical
1468
1563
1101
1172
730
782
367
391
110V-277V 50/60 Hz Dimmable, Class 2 LED driver is
Better Light Control:
Engineered Awen™ optics
standard and mounted within integrated cast
eliminate wasted light
and light pollution
assembled and ready for installation.
Longer Life:
Exceptional thermal
management extends
useful life
a 19 step program of cleaning, priming, and powder-
aluminum base cabinet. Alcott ships prewired; fully
Finish
Pangard II®, offered exclusively by Landscape Forms, is
coating that produces the finest metal finish available
for site furniture. In addition, Pangard II® contains no
heavy metals and is free of Hazardous Air Pollutants.
Warranty
2 fc
0.5 fc
Six years (50,000hr) on LED cartridge and three
2 fc
0.1 fc
years on finish and manufacturing defects.
0.5 fc
Grid spacing
equals pole
height
0.1 fc
Grid spacing
equals pole
height
To Order
Alcott Light Distribution and Spacing
Specify Alcott and powdercoat color for frame.
Alcott meets or exceeds the IESNA DG-5 standard for Park walkways, Class I bikeways, and
Specify with Type 3 or Type 5 light. Specify optional
Residential sidewalks at 80' pole spacing, Intermediate sidewalks at 60' pole spacing, and
cover plate. Alcott is surface mounted and ships
Commercial sidewalks at 50' pole spacing. Alcott, at 50' pole spacing, also meets the “Special
with installation template and hardware. Mounting
Alcott
hardware can be pre-ordered.
LED Pedestrian Lighting
UL Listed, RoHS
Conditions” criteria where increased vertical illuminance levels are needed for safety by
improving facial recognition. Outside of North America, Alcott meets CIE-136-2000 standard
Other
for Residential parks at 60' pole spacing, and City Center/Arcades at 50'.
Energy Star Partner,
Concord
RoHS
COMPLIANT
Patent #: US Pat D652,977
800.521.2546 269.381.3455 fax
431 Lawndale Avenue, Kalamazoo, MI 49048
www.landscapeforms.com
specify@landscapeforms.com
© 2013 Landscape Forms, Inc.
TYPE F8 OPTION 2: DECORATIVE LED POST TOP AREA LIGHT
AAL:
PROL-T5-56LED-3K-450(FINISH)-LDL-PCA-T-PT4
WITH POLE DB6-4R14-22614FT-(FINISH)
Providence® MicroCore™ – Large Housing PROL
Providence® MicroCore™ – Large Housing PROL
TYPE
TYPE
FEATURES
•
•
•
• 3000K, 4200K, 5100K CCT
• 0-10V dimming ready
• Integral surge suppression
DLC Qualified
Reliable, uniform, glare free illumination
Types II, III, IV, V and custom
distributions
•
•
•
LUMINAIRE PERFORMANCE
LifeShield™ thermal protection
13 standard powder coat finishes
Upgrade Kits
Ordering Code
Secondary
3K (WW)
4K (NW)
5K (BW)
Lens or Distribution
Light Engine
BUG Rating
Shield
Delivered Efficacy BUG Rating Delivered Efficafcy BUG Rating Delivered Efficafcy
Lumens (Lm/W) B U G Lumens (Lm/W) B U G Lumens (Lm/W) B
U
G
T2-56LED
TYPE 2
6556
50
2 0 2
8283
63
2 0 2
8860
67
2
0
2
T3-56LED
TYPE 3
6591
50
2 0 2
8240
62
2 0 2
8907
67
2
0
2
No Lens
T4-56LED
TYPE 4
6370
48
1 0 2
8048
61
1 0 2
8603
65
1
0
2
(Standard)
T5-56LED
TYPE 5
6620
50
3 0 1
8318
63
3 0 1
8318
63
3
0
1
TL-56LED
45° Left
6048
46
1 0 2
7163
54
1 0 2
7959
60
1
0
2
TR-56LED
45° Right
6048
46
1 0 2
7163
54
1 0 2
7959
60
1
0
2
T3-56LED
HSS
TYPE 4
5275
40
0 0 2
6316
48
0 0 2
6687
51
0
0
2
MicroCore
T2-56LED
TYPE 2
4196
49
1 0 1
5273
62
2 0 2
5670
67
2
0
2
T3-56LED
TYPE 3
4218
50
1 0 1
5301
62
1 0 1
5700
67
1
0
2
T4-56LED
TYPE 4
4077
48
0 0 1
5151
61
1 0 2
5506
65
1
0
2
No Lens
(Standard)
T5-56LED
TYPE 5
4236
50
2 0 1
5324
63
3 0 1
5275
62
3
0
1
TL-56LED
45° Left
3871
46
1 0 1
4584
54
1 0 2
5094
60
1
0
2
TR-56LED
45° Right
3871
46
1 0 1
4584
54
1 0 2
5094
60
1
0
2
T4-56LED
HSS
TYPE 4
3376
40
0 0 2
4042
48
0 0 2
4280
50
0
0
2
Optical
System
SPECIFICATIONS
QUANTITY = 15
23.6"/599mm
18.7 in / 475 mm
Diameter: 23.6” / 599 mm
Height: 38.95” / 989 mm
• Weight: 47 lbs
• EPA: 1.33
• IP Rating: 65
•
•
31.5 in / 800 mm
38.95/989mm
Drive System Watts
Current
700
132
450
85
* DesignLights Consortium® Qualified Product
ELECTRICAL CHARACTERISTICS
Driver
ORDERING INFORMATION
1
MODEL
2
3
4
5
6
Optical
System
7
LED
Drive
mA
System
Watts
700
700
132
450
450
85
Ordering Code
PROL
Light Engine
CCT
1. LIGHT ENGINE
4. COLOR
MicroCore Precision aimed optics
T2-56LED
T3-56LED
T4-56LED
T5-56LED
TL-56LED
TR-56LED
2. COLOR TEMPERATURE
3K
4K
3. DRIVE CURRENT
®
A R C H I T E C T U R A L
A R E A
Drive Current
700
450
5K
AWT
BLK
MTB
DGN
DBZ
WRZ
BRM
VBL
Color
CRT
MAL
MDG
ATG
LGY
RAL/PREMIUM COLOR
CUSTOM COLOR
Options
Controls
Mounting
6. CONTROL
WIH (Integral HBA w iHUBB IFM transceiver and
antenna)
SCP9 (Programmable motion control,
factory default is 50%)
7. MOUNTING
MicroCore
VAC
HZ
120-277
50/60
LED COLOR
Amps AC
120
277
1.1
0.5
0.7
0.3
Min.
Power
Factor
Max
THD
(%)
Operating
Temp.
Range
Dimming
Range
*.9
20
-30°C TO
+40°C
10% TO
100%
Dimming
Source current out of Absolute voltage range on
0-10V purple wire
0-10V (+) purple wire
Max
Min
Typical
Max
Min
Typical
0 MA
-
2 MA
-2.0 V
-
+15 V
Ordering Code
4K
5K
3000K
5100K
4200K
2800K – 3175K 3800K – 4600K 4600K – 5600K
* 80
* 70
* 70
3K
Consult factory for Amber,
Turtle Friendly, Gulf Coast and
Observatory applications.
CCT Average
CCT Range
CRI Minimum
Standard configuration slips over a 5” DIA open
top pole or may choose one.
5. OPTIONS
Wall Mount Arm
SPK (Decorative spike)
BPS (Struts painted brass)
LDL (Lightly diffused lens. )
CLR (Clear flat lens)
HSS (House side shield)
PFN (Finial painted brass)
EPA-C (Egress-Contemporary)
EPA-T (Egress-Traditional)
PCA-C (Rotatable photocell-Contemporary)
PCA-T (Rotatable photocell-Traditional)
PT4 (Post top fitter for a 4"/100mm O.D. pole)
WMA56
TRA55
TRA56
Pier Mount
SLA1
SLA1-2
PM2
WMA55
WIRING LEADS
Luminaires not configured with
wiHUBB or photo-control shall be
provided with 0-10 purple and gray
dimming leads.
Pole Mount Arm
PM1
PM3
TM-21 LIFETIME CALCULATION
Optical System Ordering Code
L I G H T I N G
MicroCore
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2014 June 2014
56LED
Line Voltage
JOB
TYPE
NOTES
| 1 |
56LED
Ambient Environment °C
15
25
40
Projected Lumen Maintenance (% vs. Khrs)
TM-21*
15
25
50
100
60
95
93
93
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2014 June 2014
93
91
91
JOB
TYPE
NOTES
88
97
87
86
85
85
80
79
78
Reported L70
* 60
| 2 |
TYPE F8 OPTION 3: DECORATIVE LED POST TOP AREA LIGHT (MATCHES LUMINAIRE ON TRIMBLE COURT ALLEY)
HOLOPHANE:
GVU-55QL-12-B-7-S-C-B
WITH POLE FW1722-CIS/BK
Specifications
UTILITY SYRACUSE SERIES LUMINAIRE
WITH LUNAR OPTICS TM
Maximum weight - 47 lbs
Maximum effective projected area - 1.38 sq. ft.
QUANTITY = 15
15-3/4"
PRISMATIC GLASS
REFLECTOR
CLEAR
FINIAL
SPUN
COVER
STANDARD
FINIAL
CAST
ALUMINUM
RIBS
LUNAR OPTICS
FLOWER
FINIAL
PRISMATIC GLASS
REFRACTOR
30-5/8"
NOM.
HEIGHT
OPTIC
SET SCREW
BALL
FINIAL
ELECTRICAL MODULE
WITH TWISTLOCK
RECEPTACLE
(OPTIONAL)
LUMINAIRE
HOUSING
EAGLE
FINIAL
SET SCREWS
SLIPFITTER FOR
NOMINAL 3" DIA.
TENON
ORDERING INFORMATION
55QL 12 B 6 S C B
GVU
BALLAST TYPE
(MOGUL BASE)
050HP = 50W HPS
070HP = 70W HPS
100HP = 100W HPS
15AHP = 150W 55V HPS
175MH = 175W MH
100MV = 100W MV
175MV = 175W MV
250MV = 250W MV
VOLTAGE
12 = 120 VOLT
20 = 208 VOLT
24 = 240 VOLT
27 = 277 VOLT
34 = 347 VOLT
48 = 480 VOLT
MT = MULTITAP
(120, 208
240, 277
VOLT)
HOUSING
COLOR
B = BLACK
Z = BRONZE
N = GREEN
A = AS SPEC
BALLAST TYPE
(MEDIUM BASE)
055QL = 55W INDUCTION (120, 230 VOLT)
50DHP = 50W HPS
085QL = 85W INDUCTION (120, 230 VOLT)
70DHP = 70W HPS
165QL = 165W
INDUCTION (200, 240 VOLT)
10DHP = 100W HPS
DECORATIVE
15DHP = 150W 55V HPS
S = SYRACUSE
70DMH = 70W MH (NOT
TOP WITH RIBS
AVAIL. W/ 480V)
AND BANDS
10DMH = 100W MH (NOT
AVAIL. W/ 480V)
17DMH = 175W MH
OPTICAL TYPE
6 = IES TYPE II DIST.
WITH LUNAR OPTICS
(IES) CUTOFF
7 = IES TYPE III DIST.
WITH LUNAR OPTICS
(IES) CUTOFF
8 = IES TYPE V DIST.
WITH LUNAR OPTICS
(IES) CUTOFF
FINIAL
N = NONE
C = 3" CLEAR
S = 5" STANDARD
F = FLOWER
B = BALL
E = EAGLE
P = PAWN
TRIM FINISH
U = NO TRIM USED
B = BLACK
Z = BRONZE
G = GOLD
N = GREEN
A = AS SPEC.
OPTIONS
PS = PROTECTED STARTER FOR HPS UNITS ONLY
H = PHOTOCONTROL RECEPTACLE
T = BOTH NEMA TWISTLOCK RECEPTACLE AND PROTECTED STARTER TOGETHER (HPS UNITS ONLY)
ARCHITECTURAL OUTDOOR ORDER #:
TYPE:
1058193
C1
LEADER IN LIGHTING SOLUTIONS
An
Cast Aluminum, Cast Iron, Cast Iron & Steel
cuityBrandsCompany
214 OAKWOOD AVENUE - NEWARK, OHIO 43055
Product Catalog
Catalog Number Information
CA
FG-SXXH
BKH
1
2
3
4
5
6
PACKAGE
POLE STYLE
POLE/BASE SIZE
MATERIAL
FINISH
OPTIONS/ACCESSORIES
Z
B
BF
BL
C
CH
CP
CO
D
DW
FM
FW
H
K
M
MR
NO
NP
NY
OS
P
PT
RF
RH
S
SP
W
See Charts
CA
CI
CIS
BKH
DGH
DBH
CMH
CSH
FG-SXXH
FGIUS-SXXH
FGIUL-SXXH
RB/GFI/WPC
STEP 3:
For ordering information on the
decorative composite and concrete
pole options, contact your local
Holophane factory sales representative
16” Base
816R7
1016R7
20” Base
1220R7
For compatible cross-arms and postop luminaires,
see “decorative brackets and crossarms for postop
luminaires”
POLE STYLE
STEP 2:
Cast Aluminum Continued
17” Base
617
717
917
1217
20” Base
1020
1220
1320
1520
24” Base
1024
1224
1324
1524
CP | Chesapeake
POLE STYLE
Cast Iron and Steel
C
D
18” Base
918
1218
1418
20” Base
920
1020
1220
FW
Z1
STEP 2:
15” Base
515
615
815
1115
1215
1315
POLE STYLE
Cast Aluminum
Complete pole package including
anchor bolts
1 To order without any anchor bolts omit the
Z prefix
STEP 2:
STEP 3
CAT. NO.
POLE STYLE
S
SP
NY
W
10’
12’
14’
167 (369)
186 (409)
204 (449)
221 (488)
NP | Nicoma Park
15” Base
1015
9’6”
122 (269)
5’8”
6’8”
9’2”
11’8”
127 (279)
137 (302)
174 (384)
214 (472)
9’6”
12’
13’2”
14’6”
197 (434)
237 (522)
266 (587)
277 (610)
6’6”
7’6”
10’
12’6”
13’8”
15’
134 (296)
145 (319)
182 (401)
222 (489)
251 (554)
262 (577)
9’6”
12’
13’2”
14’6”
239 (526)
279 (614)
308 (679)
318 (702)
NY | North Yorkshire
17” Base
717
817
1017
1317
1417
1517
20” Base
1120
1320
1420
1620
10’6”
13’
14’2”
15’6””
204 (450)
344 (538)
274 (603)
284 (626)
8’6”
12’
14’
151 (332)
173 (381)
247 (545)
8’6”
12’
14’
174 (383)
195 (431)
269 (594)
135 (297)
148 (327)
11’11”
4’8”
5’8”
8’2”
10’8”
11’10”
13’2”
RF | Ridgefield
Fluted Tapered, 16” Base
516
5’
616
6’
916
8’6”
1116
11’
1216
12’2”
1416
13’6”
Octagonal Tapered, 16” Base
11E16
10’9”
SA | San Antonio
19” Base
1219
95 (279)
106 (302)
143 (384)
183 (472)
212 (468)
222 (491)
Cast Iron
B
BF
BL
STEP 3:
TOP TYPE/DIMENSIONS
See the charts on pages 133-131
CH
STEP 4:
CA
CI
CIS
B
CP
CO
DW
Fluted Tapered, 18” Base
618
6’
718
7’
1018
9’6”
1218
12’
1318
13’2”
1518
14’6”
Fluted Tapered, 22” Base
1022
9’10”
1222
12’4”
1422
13’6”
1522
14’10”
Octagonal Tapered, 18” Base
12E18
11’9”
Octagonal Tapered, 22” Base
12E22
12’1”
RF
C
CP
D
MATERIAL
Cast aluminum
Cast iron
Cast iron and steel
STEP 5:
FM
BKH
DGH
DBH
CMH1
CSH1
STEP 3
CAT. NO.
16” Base
1016
1216
1416
7’11”
9’11”
TOP TYPE/DIMENSIONS
WEIGHT
KG (LBS)
HEIGHT
H | Hamilton
12’3”
C | Columbia
17” Base
S
1217
1317
1417
1717
20” Base
1220
1320
1520
1720
2020
2220
24” Base
1224
1324
1524
1724
2024
2224
15” Base
1115
1215
1315
1615
1915
2115
134 (296)
145 (319)
182 (401)
222 (489)
251 (554)
262 (577)
F
W | Fort Washington
18” Base
1218
1318
1518
1718
2018
2218
22” Base
1222
1422
1522
1722
2022
2222
N
NY | North Yorkshire
17” Base
1317
1417
1517
1817
2117
20” Base
1320
1420
1620
1820
2120
2320
R
F | Ridgefield
192 (423)
248 (546)
Octagonal, 18” Base
1118R7
11’
Octagonal, 20” Base
1220R7
12’
HEIGHT
WEIGHT
KG (LBS)
11’8”
12’10”
14’2”
12’
123 (271)
129 (285)
134 (296)
146 (321)
12’
13’2”
14’6”
17’
20’
21’10”
146 (321)
152 (335)
152 (335)
156 345)
168 (370)
186 (410)
12’
13’2”
14’6”
17’
20’
21’10”
166 (365)
166 (365)
176 (389)
187 (413)
199 (438)
206 (454)
10’8”
11’10”
13’2”
15’8”
18’8”
20’6”
102 (224)
108 (238)
112 (248)
123 (272)
135 (297)
142 (313)
12’
13’2”
14’6”
17’
20’
21’10”
164 (361)
170 (375)
175 (385)
186 (409)
197 (434)
204 (450)
12’4”
13’6”
14’10”
17’4”
20’
22’2”
234 (515)
240 (529)
244 (539)
255 (563)
266 (587)
274 (604)
12’6”
13’8”
15’
17’6”
7’6”
121 (266)
127 (280)
132 (290)
142 (314)
154 (339)
13’
14’2”
15’6””
18’
21’
22’10”
153 (337)
159 (351)
164 (361)
175 (385)
186 (410)
193 (426)
11’
12’2”
13’6”
16’
19’
20’10”
131 (289)
137 (303)
142 (313)
153 (337)
164 (361)
171 (377)
D | Delaware
WP | Winter Park
FW | Fort Washington
Cast Aluminum Only
BF
Bradford
BL
Burlington
CH Charleston
CO Colorado
DW Dunwoody
FM Freemont
K
Kentwood
M
Mount Vernon
MR Manchester
NO Norwich
OS Oslow
P
Plymouth
PT
Princeton
RH Rockford Harbor
S
Salem
SP
Southport
W
Wadsworth
Cast Iron Only
NP Nicoma Park
SA San Antonio
WP Winter Park
Cast Aluminum and Cast Iron
B
Barrington
CP
Chesapeake
H
Hamilton
NY North Yorkshire
Cast Iron and Cast Iron & Steel
C
Columbia
D
Delaware
FW Fort Washington
NY North Yorkshire
RF
Ridgefield Park
SCALE: N/A
DRAWN: BHH
APP'D:
DATE: 04-29-03
WEIGHT
KG (LBS)
HEIGHT
D | Delaware
Catalog Number Information
PACKAGE
STEP 3:
C | Columbia
For banner arms, finials, flagpole holders, ladder
rests, custom cast logos, and ground fault
interrupter weather proof receptacles, see
“accessories for decorative cast aluminum,
cast iron, and cast iron and steel posts” section
STEP 2:
TOP TYPE/DIMENSIONS
STEP 3
CAT. NO.
B | Barrington
Notes:
Orientation sheets must be filled out on receptacles
and signed by the distributor
For compatible signage, see “signage for
decorative posts” section
PT (fluted) PT (smooth) RH
STEP 1:
DECORATIVE
Product Catalog
8S420
BF
Z
Example:
Cast Iron and Cast Iron & Steel
DECORATIVE
How to Construct a Catalog Number
DRAWING NO: US-3476
THIS DRAWING, WHEN APPROVED, SHALL BECOME THE COMPLETE SPECIFICATION FOR
THE MATERIAL TO BE FURNISHED BY HOLOPHANE ON THE ORDER NOTED ABOVE.
A UNIT OF SIMILAR DESIGN MAY BE SUPPLIED, BUT ONLY AFTER APPROVAL BY THE
CUSTOMER IN WRITING. ON POLE ORDERS AN ANCHOR BOLT TEMPLATE PRINT WILL BE
SUPPLIED WITH EACH ANCHOR BOLT ORDER TO MATCH THE POLE PROVIDED.
THIS PRINT IS THE PROPERTY OF HOLOPHANE AND IS LOANED SUBJECT TO
RETURN UPON DEMAND AND UPON EXPRESS CONDITION THAT IT WILL NOT BE USED
DIRECTLY OR INDIRECTLY IN ANY WAY DETRIMENTAL TO OUR INTERESTS, AND ONLY
IN CONNECTION WITH MATERIAL FURNISHED BY HOLOPHANE.
Ordering Information
GENERAL DESCRIPTION
The Utility Syracuse is designed for ease of maintenance with
the plug-in electrical module common to each of the luminaires
in Holophane's Utility Luminaire Series. The traditional acorn
shaped luminaire, while reminiscent of the 1920's, contains a
precision optical system that maximizes post spacings while
maintaining uniform illumination.
OPTICAL SYSTEM
The optical system consists of a precisely molded thermal
resistant borosilicate glass refractor and top reflector mounted
with a decorative aluminum cover, ribs and bands. The glass top
reflector redirects over 50 % of the upward light into the
controlling refractor while allowing a minimal soft uplight
component to define the top of the luminaire. A stainless steel
hinge and latch allow easy access for relamping. The lower
refractor uses precisely molded prisms to maximize pole
spacings while maintaining uniform illuminance. Three refractors
are available, designed for I.E.S. type II, III, and V distributions.
The Lunar Optics assembly (IES Cutoff) is standard. It consists
of an aluminum plate and anodized, hydroformed reflector
designed to restrict intensity at the critical angle.
LUMINAIRE HOUSING
The luminaire housing, cast of aluminum, provides an enclosure
for the plug-in electrical module. Four uniquely designed
stainless steel spring clips enclosed in a clear polyvinyl chloride
sleeve and adjusted by hex head 1/4-20 bolts securely cradle
the prismatic glass refractor. The same 1/4-20 bolts support the
decorative rib and banding assembly. The nickel plated lamp
grip socket and three station incoming line terminal block are
prewired to a five conductor receptacle for ease in connection
the electrical module. The slipfitter will accept a 3" by 2-7/8" to
3-1/8" O.D. tenon.
LUMINAIRE HOUSING / DOOR
Cast of aluminum, the housing / door is removable without the
use of tools and is retained by a nonconductive lanyard. For
units with an E.E.I.-N.E.M.A. twist lock photocell receptacle, the
door contains an acrylic "window" to allow light to reach the cell.
ELECTRICAL MODULE
The ballast components are mounted on a steel plate that is
removable without the use of tools. A matching five conductor
plug connects to the receptacle in the luminaire housing to
complete the wiring. Where a starting aid is required, it is
provided with a separate plug-in connector and can be replaced
without the use of tools. For photoelectric operation, the
electrical module is provided with an E.E.I.-N.E.M.A. twist lock
photocell receptacle.
BALLASTS
(Refer to Ballast Data Sheet for specific operation
characteristics)
50 - 100 watt 120 volt High Pressure Sodium (HPS) ballasts are
High Power Factor Reactor type. All other HPS ballast are High
Power Factor Autotransformer type.
175 watt Metal Halide (MH) ballasts are Peak Lead
Autotransformer type. 70 and 100 watt MH units are available
only with High Power Factor High Reactance type ballast.
All Mercury Vapor (MV) ballasts are High Power Factor
Constant Wattage Autotransformer (CWA) type.
FINISH
The luminaire is finished with polyester powder paint applied
after a seven stage pretreatment precess to insure maximum
durability.
UL LISTING
The luminaire is UL listed as suitable for wet locations at a
maximum 40 degrees C ambient temperature.
222 (489)
309 (681)
168 (370)
178 (393)
215 (475)
255 (563)
285 (628)
295 (651)
269 (592)
309 (681)
338 (745)
349 (769)
225 (496)
279 (674)
16” Base
1116
1216
1416
1616
1916
2116
FINISH
Black
Dark green
Dark bronze
Custom color
RAL number
1 Special order
H
KW
MR
M
NY
NO
OS
P
FW
H
NP
STEP 6:
NY
OPTIONS AND ACCESSORIES
FG-SXXH
Receptacle with wet
location while cover
closed
FGIUS-SXXH Receptacle with small,
in-use wet location cover
FGIUL-SXXH Receptacle with large,
in-use wet location cover
RB/GFI/WPC Receptacle with
weatherproof box and
cover for use in base
RF
SA
WP
|
HOLOPHANE® Outdoor Lighting
D E C O R AT I V E
|
Historical Style Posts
|
135
HOLOPHANE® Outdoor Lighting
D E C O R AT I V E
|
Historical Style Posts
139
TYPE F9: LINEAR LED TAPE LIGHT IN CHANNEL UNDER STONE CAP AT PLANTERS AND SEAT WALLS, AND AT STAGE STAIRS
TIVOLI:
TPL-SB-3.0-O-30-C-24
WITH TPL-I-MCHAN-8
WITH ADNM-120-1-4-24-D
WITH DIM-OT-1-4-D
QUANTITY = TO BE
CONFIRMED, ALLOW 750FT
CAT:
TIVOTAPETM OUTDOOR SB
FEET:
TYPE:
STANDARD BRIGHTNESS
PROJECT:
Static IP68 LED tape light strip emits sharp,
pure color for unique effects in outdoor
niche, cove and architectural applications
TIVOTAPETM OUTDOOR SB
TIVOTAPETM OUTDOOR SB
STANDARD BRIGHTNESS
STANDARD BRIGHTNESS
WIRING END PREP OPTIONS
RECOMMENDED POWER SUPPLIES
FEATURES
• Flexible flat conductor strip with closely spaced LEDs encased
in rectangular IP68 molded jacket allows for wide range
of installation possibilities
• Ideal for exterior cove, under-bar/cabinet, landscape lighting accents
• Sold per foot manufactured in continuous lengths and shipped
manufactured to specified lengths with factory attached end preps
• Max continuous lengths: up to 22’ per run
TPL-SB-3.0-O-LEAD-C
L
Lead/Dead End
24” 2 conductor 18ga jacketed lead wire
factory attached to one end of tape with
field trimmable dead end at other.
Sold per each.
• Smooth 0% to 100% range dimming capability with commercially
available 0V-10V dimming protocol or MLV (magnetic) and ELV
(electronic) low voltage dimming control. (See page 4)
PL
TPL-SB-3.0-O-LEAD-D
Lead/Lead
24” 2 conductor 18ga jacketed lead wire
factory attached to both ends of tape.
Sold per each.
TPL-SB-3.0-O-CONN 18ga UL wet listed
butt connectors. Used to interconnect
factory attached lead wires. Sold per each
(2 each required per connection).
TPL-SB-3.0-O-XEP Extra lead wire
Additional factory attached jacketed lead
wire to extend lengths of LEAD-C and
LEAD-D up to 20ft max. Sold per foot (not
shipped as spooled wire).
MOUNTING ACCESSORIES
CAT NO
APPLICATION
ADNM-120-1-4-24-D
ADNM-240-2-4-24-D
ADNM-320-3-4-24-D
JT-100-1-4-24-D
JTH-100-1-4-24-D
JT-300-3-4-24-D
JTH-300-3-4-24-D
MT-100-1-24-DD
MW-120-1-4-24-D
Outdoor
Indoor/
Outdoor
PRIMARY AND
SECONDARY VOLTAGE
TOTAL WATTAGE /
AMPERAGE PER BREAKER
LISTING
DIMENSIONS
ELECTRONIC OR
AC MAGNETIC
DIMMABLE
(Y OR N; TYPE)
120-277V AC / 24V DC
120-277V AC / 24V DC
120-277V AC / 24V DC
120V AC / 24V DC
277V AC / 24V DC
120V AC / 24V DC
277V AC / 24V DC
120-240, 277V AC
120-277V AC / 24V DC
96W / 1X4A
192W / 2X4A
288W / 3X4A
96W / 1X4A
96W / 1X4A
288W / 3X4A
288W / 3X4A
96W / 1X4A
96W / 1X4A
CULUS
CULUS
CULUS
CETLUS
CETLUS
CETLUS
CETLUS
CULUS
UL/CE
12.00”W X 12.00”L X 4.00”D
12.00”W X 12.00”L X 4.00”D
12.00”W X 12.00”L X 4.00”D
4.25”W X 11.00”L X 4.00”D
4.25”W X 11.00”L X 4.00”D
8.50”W X 16.00”L X 4.50”D
8.50”W X 16.00”L X 4.50”D
8.50”W X 16.00”L X 4.50”D
8.66”W X 2.67”L X 1.53”D
Electronic
Electronic
Electronic
Magnetic
Magnetic
Magnetic
Magnetic
Electronic
Electronic
Y: F
Y: F
Y: F
Y: A, C & E
Y: B & D
Y: A, C & E
Y: B & D
Y: SELF DIMMING
Y: F
SPECIFICATIONS
TIVOTAPE SB 3.0 WATT
OUTDOOR TAPELIGHT
EFFICACY
LM/WT
CRI
LM/FT
WT/FT
Delux Warm White 2400°K
55.00
75.7
165
3.0
Delux Warm White 2700°K
47.34
79.4
142
3.0
Warm White 3000°K
49.00
80.5
147
3.0
Neutral White 3500°K
57.34
79.8
172
3.0
DIMMERS
Items in bold denote Title 24 High efficacy rating. Measurements are
based on 24V DC power design calculations will vary based on power
supply and run lengths
LED DATA
WATTAGE LED LIFE* / COLOR TEMP
Tivotape SB 3.0
Outdoor Tapelight
VIEWING
ANGLE
0.085W 40,000 hrs
per LED Delux Warm White 2400°K +/-100°K
Delux Warm White 2700°K +/-100°K
Warm White 3000°K +/-100°K
Neutral White 3500°K +/-100°K
TPL-I-MCHAN-8 Mounting Channel
Clear Polycarbonate in 8’ lengths.
Can be used as Tivotape Mounting
Channel with tape mounted directly
PROFILES
120°
TPL-O-45-MCH-8 Tivotape 45˚ Mounting
Channel. White PVC in 8’ length
21⁄64"
5/16"
3/4"
11/16"
*LEDs operate at 70% of LED manufacturers maximum current spec
TPL-INF-C-CHAN-8 Clear
TPL-INF-F-CHAN-8 Frosted
Infinity Mounting Channel
8’ standard lengths, two piece
channel is recommended for uneven
mounting surfaces or for adding
protection from physical access.
TPL-INF-EC Infinity Channel End Cap
3⁄16"
rating
21⁄64"
1. Spacing−LED spacing: 21/64” OC
2. LEDs−36 LEDs per foot
3. Mounting−Includes installation-ready 3M tape adhesive for
simplified installation directly to mounting channel or application surface
4. Installation−Optional clear Polycarbonate and Aluminum Channels
(for damp weather protected areas only) may be used separately or
with decorative, protective covers
5. End Preps−Factory attached end preps available (see Page 2)
6.
7.
8.
9.
5/8"
Field Trimmable−2” cuttable sections (See page 3 for cut zones)
Power Supply−Listed Class II 24V DC power supply required
Listing−cETLus listed file #4008134
Compliance−ROHS compliant
IP68
TIVOTAPE SB 3.0 OUTDOOR TAPELIGHT ORDER SPECIFICATION GUIDE
EXAMPLE: TPL-SB-3.0-O-24-C-24
TPL
INTENSITY
–
SB
WATTAGE
–
3.0
INSTALL
–
O
LED COLOR
–
TYPE
CONTROL
SIGNAL
INPUT
VOLTAGE
OUTPUT
VOLTAGE
MAX
LOAD
BREAKER
RATING
DIMENSIONS
A
N-600
AC Magnetic
N/A
120V AC
120V AC
450W
N/A
Recessed Single Gang Box
B
NH-600
AC Magnetic
N/A
277V AC
277V AC
450W
N/A
Recessed Single Gang Box
C
N-1000
AC Magnetic
N/A
120V AC
120V AC
800W
N/A
Recessed Dual Gang Box
D
NH-1000
AC Magnetic
N/A
277V AC
277V AC
800W
N/A
Recessed Dual Gang Box
E
N-1500
AC Magnetic
N/A
120V AC
120V AC
1200W
N/A
Recessed Dual Gang Box
F
DIM-OT-1-4-D
Control Interface
0-10V DC
24V DC
24V DC
96W
4A*
7"L X 1½"W X ¾"H
DIM-OT is a full range control interface that receives dimming signal from various controllers (0-10V DC).
Consult factory for more information.
*DIM-OT applications require 1 each DIM-OT per 4 amp circuit
Base for Outdoor
PRODUCT SPECIFICATION GUIDE
ALUMINUM CHANNELS WITH BASE AND COVER (FOR DAMP WEATHER PROTECTED AREAS ONLY)
LIGHT
MAX CONTINUOUS
SOURCE
RUN LENGTH*
All color temperatures 22 ft
*Max continuous run based on 3.0A max load
TIVOLI
24V DC
POWER
SUPPLY
MTBF
10. Warranty−3 year warranty
PRODUCT
CODE
DIMMER
5/8"
Cover for Outdoor
7⁄16"
NOTE: Reverse channels for Outdoor Tivotape™.
Install Tivotape™ in Cover Channel.
5/16"
1/2"
SELECTOR
CONTINUOUS
–
C
REQUIRED
POWER SUPPLY
VOLTAGE
24
TivotapeTM SB=Standard
3.0 =3.0 watts O=Outdoor 24 = Delux Warm White C = Continuous 24=24V DC
Brightness
per foot
IP66
(2400°K +/-100°K)
27 = Delux Warm White
(2700°K +/-100°K)
30 = Warm White
(3000°K +/-100°K)
35 = Neutral White
(3500°K +/-100°K)
+
PSU
See power supply
& dimmer selection
guide on page 4
REQUIRED POWER
SUPPLY OPTIONS
ADNM-120-1-4-24-D
ADNM-240-2-4-24-D
ADNM-320-3-4-24-D
JTH-100-1-4-24-D
JTH-100-1-4-24-D
JT-300-3-4-24-D
JTH-300-3-4-24-D
MT-100-1-4-24-D
MW-120-1-4-24-D
OPTIONAL
DIMMERS
N-600
NH-600
N-1000
NH-1000
DIM-OT-1-4-D
See power dimming
specifications for
more information
TPL-AL-CHAN-1-6 AL Series Aluminum
Channel with Mounting Carrier Base and
Domed Lens. Available in 6 ft standard lengths.
TPL-AL-CHAN-1-EC1 End Cap with no hole
TPL-AL-CHAN-1-EC2 End Cap with hole
TPL-AL-CHAN-1-LNSC Lens, Clear
TPL-AL-CHAN-1-LNSF Lens, Frosted
TPL-AL-CHAN-1-LNSO Lens, Opal
TPL-AL-CHAN-2-6 AL Series 45°
Aluminum Channel with Narrow Lens.
Available in 6 ft standard lengths.
TPL-AL-CHAN-2-MCLP Mounting Clip
TPL-AL-CHAN-2-EC1 End Cap with no hole
TPL-AL-CHAN-2-EC2 End Cap with hole
TPL-AL-CHAN-2-LNSC Lens, Clear
TPL-AL-CHAN-2-LNSF Lens, Frosted
TPL-AL-CHAN-2-LNSO Lens, Opal
TPL-AL-CHAN-3-6 AL Series small square
profile Aluminum Channel with Flush Lens.
Available in 6 ft standard lengths
TPL-AL-CHAN-3-MCLP Mounting Clip
TPL-AL-CHAN-3-EC1 End Cap with no hole
TPL-AL-CHAN-3-EC2 End Cap with hole
TPL-AL-CHAN-3-LNSC Lens, Clear
TPL-AL-CHAN-3-LNSF Lens, Frosted
TPL-AL-CHAN-3-LNSO Lens, Opal
Typically, LED product failures occur within fixture construction,
interdependent component failure, or operation under adverse conditions.
Tivoli operates LEDs at a derated current to insure that LED MTBF values
are based on product fixture construction and real application standards.
Still, conditions such as excessive voltage, vibration, heat, and other
adverse conditions may negatively effect the life of LEDs.
Standard UL
listed J-Box
by Others
/”
3
/4”
1
5
/8”
1
/2”
/2”
Wiring from
Transformer to
J-Box must be to
Class II standards.
Refer to NEC
and local code
requirements.
Tivotape
7
5
/8”
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Primary
Wiring
Input
1
2
See power supply specifications
for more information
Copyright © 2014 Tivoli 08.22.14− Page 1 of 4
TPL-AL-CHAN-4-6 AL Series Recessed
Profile Aluminum Channel with Flush Lens.
Available in 6 ft standard lengths.
TPL-AL-CHAN-4-EC1 End Cap with no hole
TPL-AL-CHAN-4-EC2 End Cap with hole
TPL-AL-CHAN-4-LNSC Lens, Clear
TPL-AL-CHAN-4-LNSF Lens, Frosted
TPL-AL-CHAN-4-LNSO Lens, Opal
Mean Time Between Failures (MTBF) for LEDs: While Tivoli
utilizes LEDs provided by industry leading vendors, these are electrical
components with calculated manufacturers mean time between failures
(MTBF). MTBF is rated
as the average point at which ½ of color LEDs will lose 50% of their
original brightness. MTBF for White LEDs is based on when ½ are
reduced to 70% of their original brightness.
7
/16”
/16”
Copyright © 2014 Tivoli 08.22.14− Page 2 of 4
Copyright © 2014 Tivoli 08.22.14− Page 4 of 4
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com / sales@tivolilighting.com
CONTROL SYSTEM
CONTROL NARRATIVE
NLIGHT:
GATEWAY SERIES 2 CLOCK
AND NETWORK INTERFACE
CONTROLLER
WIRING (DO NOT WIRE HOT)
Revised 12.05.2012 © 2012 Sensor Switch
The nGWY2 CTRL and nGWY2 GFX units are powered via a PS 250 power supply wired via each unit’s power terminal connectors.
Note: For 347 VAC powering, dual PS 150 347 power supplies are provided. Be sure to connect the red power output wires from the PS
150 347 supplies together and then wire to both the nGWY2 GFX and nGWY2 CTRL units.
nGWY2
nGWY2 CTRL
H
nGWY2 CTRL
GATEWAY (SERIES 2)
CLOCK & NETWORK INTERFACE CONTROLLER
1
1
2
120-277 VAC Wiring
347 VAC Wiring
PHYSICAL/ELECTRICAL SPECS
(CONTROL UNIT)
SIZE 4.90” H x 4.90” W x 1.05” D
(12.45cm x 12.54cm x 2.67cm)
MOUNTING 4” x 4” Square Box
PORTS
2 nLight Bus Ports (RJ-45)
1 Touch Screen Interface Port (RJ-45)
1 10/100/1000BaseT Ethernet
2 Power Terminal Inputs
INPUT CURRENT / VOLTAGE
160 mA @ 12-24 VAC/VDC
WIRES None
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
ROHS COMPLIANT / SILICONE FREE
OTHER
5 Year Warranty
Assembled in the U.S.A.
Line Voltage
H
N
BLK
Low Voltage
RED
BLK
BLK
WHT
Line Voltage
PS 150 347
nGWY2 GFX
BLK
BLK
RED
WHT
nGWY2 GFX
DESIGN / OPERATION NOTES
All lighting control profiles created in the SensorView software are stored within
the Gateway. Utilizing its onboard time clock, the Gateway sends out the settings
specified in the profiles to the appropriate downstream devices according to the user
defined schedule. Lighting control profiles can also be selected and run on-demand
via the Gateway’s Touch Screen. Additionally, by using the touch screen users can
view properties about any downstream nLight device.
•
•
•
•
•
NETWORK ACCESS FUNCTIONALITY
• A Gateway Touch Screen (nGWY2 GFX) can not be substituted for a Graphic WallPod (nPOD GFX), and vice versa.
In the nLight network architecture, the Gateway is part of the wired backbone (along
with Bridges) that interconnects all lighting zones. Through the Gateway, information
running over this backbone is linked to the Ethernet network where the SensorView
host server resides. The Gateway communicates over the backbone using CAT-5
wiring to any Bridge.
Series 2 nLight Gateways (nGWY2) can operate under the same SensorView as Series 1 nLight Gateways (nGWY)
Forwarding of On-Demand profiles is supported between nGWY2 devices only.
Global channels are supported by nGWY2 managed devices only.
Configuration and time-based control of nWiFi devices is supported by nGWY2 only
SensorView version 7.x.x or newer is required for nGWY2 (note upgrading to SensorView 7.x.x will also require a firmware update on all devices
for compatibility).
INSTALLATION
nGWY2 CTRL
nGWY2 CTRL
LAN
1
2
3
Control Unit and Power Supply
1. Mount both power supplies to a 4” x 4” square junction box (through a 1/2” knockout)
2. Connect the supplys’ class 1 line voltage wires
3. Mount nGWY2 CTRL unit to top of same junction box
4. Connect the power supplys’ class 2 low voltage wires to the nGWY2 CTRL’s terminal connectors
(polarity insensitive)
5. Unit’s LEDs will flash indicating power up.
PS 150
Reset
Button
nGWY2
GWY2 GFX
SENSORVIEW
Power Status
LED
5 6 7
3 4 5 6
nBRG 8
1
2
3 4
nBRG 8
1
2
nBRG 8
1 2 3
There are four RJ-45 ports on the Gateway 2 Control Unit. One is an Ethernet port
and assigned an IP address on the building’s Ethernet network where SensorView is
located. This IP address can be fixed or assigned dynamically using DHCP. One of
the ports is reserved for the connection to the Gateway 2 Touch Screen. The other
two ports are available for connection to Bridges or a local lighting zone.
ORDERING INFO
MODEL NUMBERS
nGWY2 KIT
nGWY2 347 KIT
nGWY2 L400 KIT
nGWY2 L400 347 KIT
Screw
Holes
4 5 6 7
Gateway Touch Screen
1. Before mounting Gateway Touch Screen (nGWY2 GFX), connect Class 2 low voltage
wires from power supplies to unit’s power terminal connections (polarity insensitive)
2. Verify unit has power by observing screen and/or LED
3. Connect CAT-5 cable(s) from nGWY2 CTRL to one of the RJ-45 port(s) on rear of
nGWY2 GFX unit
4. Verify units are communicating (indicated by on-screen blinking heart icon)
5. Mount unit to standard single gang switch box (screws provided)
6. Pressing reset button twice is equivalent to repowering unit
Note - to reset touch screen calibration, press reset button (located on left side of unit)
three times to restart unit in screen-calibration mode
NLIGHT NETWORK
PORTS (RJ-45)
DESCRIPTION
Gateway Kit (120/277 VAC) - max 1500 devices
Gateway Kit (347 VAC) - max 1500 devices
Gateway Kit (120/277 VAC) - max 400 devices
Gateway Kit (347 VAC) - max 400 devices
INDIVIDUAL DEVICE REPLACEMENT MODEL NUMBERS
nGWY2 CTRL
Control Unit - max 1500 devices
nGWY2 CTRL L400
Control Unit - max 400 devices
nGWY2 GFX
Gateway Touch Screen
PS 250 (or two PS 150 347) Power Supply 120/277 VAC (or 347 VAC)
Note: SensorView Software registration key is bundled with purchase of Gateway.
BACK
(POWER SUPPLY)
SIZE (not including ½” chase nipple)
3.00” H x 2.25” W x 1.88” D
(7.62 cm x 5.72 cm x 4.78 cm)
MOUNTING ½” knockout
OPERATING VOLTAGE
PS 250: 120-277 VAC
PS 150 347: 347 VAC
OUTPUT POWER 4W
~166 mA@ 24 VDC (PS 250)
~250 mA@ 15 VDC (PS 250)
(note ~150 mA @ 15 VDC for dual
PS 150 347 configuration)
WIRES 18 AWG (2) & 20 AWG (2)
OVERVIEW
CONTROL FUNCTIONALITY
WHT
BLK
PS 250
The nLight Series 2 Gateway (nGWY2) provides time-based control of an nLight
network as well as acts as the Ethernet interface for SensorView software. Consisting
of a control unit and touch screen wall station, the nGWY2 expands the capacity and
functionality of the Series 1 nLight Gateway (nGWY) and enables enhanced nLight
architectures to be utilized (see operation notes on back of datasheet).
N
BLK
FRONT
(TOUCH SCREEN)
SIZE 5.06” H x 3.50” W x 0.69” D
(12.85 cm x 8.89 cm x 1.75 cm)
MOUNTING Single-Gang Low Voltage
Switch Box or Ring
MOUNTING HEIGHT (recommended)
60 in (152 cm)
PORTS 2 nLight Bus Ports (RJ-45)
INPUT CURRENT / VOLTAGE
60 mA @ 12-24 VAC/VDC
WIRES None
RED
PS 150 347
CAT-5
Low Voltage
FEATURES
Discovers nLight Devices (max 1500 or
400 depending on version)
Provides System Time Clock
Stores Time-Based Profiles
Enables Setup of Global Control
Channels via SensorView
On-Demand Profile Forwarding Between
Gateways
Communicates over TCP/IP with nWiFi
Devices (consult factory)
Interfaces with SensorView Software
Remotely Upgradeable
Touch Screen Control User Interface
RED
3
3
CAT-5
SPECIFICATIONS
2
POWER TERMINALS
WARRANTY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for a period
of 60 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned Material Authorization
number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and implied
warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall Sensor
Switch, Inc. be liable for any incidental or consequential property damages or losses.
TN-707-02
1RUWKURS5RDG:DOOLQJIRUG&7‡3$66,9(‡);‡ZZZVHQVRUVZLWFKFRP
LIGHTING NARRATIVE
A quality lighting system is a critical design element which supports visitors’ enjoyment of the nighttime
environment while enhancing safety and security. The various areas of Old Town Square will have
unique visual needs and the lighting must be f exible enough to be able to respond to those needs.
Putting light where and when it is needed will improve the visual quality while reducing lighting energy
consumption. When people can see better at night, they frequently report that an area feels safe.
Achieving this goal requires that the lighting system provide the correct lighting levels, minimize glare,
balance surface brightness and enhance landscape features. A quality lighting design will use layers of
ambient, task and accent lighting and combine those layers at varied levels as the program requires. It
cannot be understated that while light levels are important, glare control and use of good color rendering
light sources play important roles in successful nighttime lighting in public spaces.
A successful lighting design relies on balanced brightness between luminaires and surfaces coupled
with appropriate contrast of light and dark, contributes to creating a warm, welcoming, and secure place,
complements the landscape design, creates focus on feature elements, and def nes the circulation
paths. The luminaires selected will be used in concert to achieve the desired effect.
Ambient and Task Lighting:
Ambient and task illumination is provided by various techniques and luminaires.
- Attached to poles, warm white LED festoon lighting (type F1) is strung above the event space, at the
central f replace and along the Whitten Court Alley. These continuous strings of low-wattage bulbs will
provide a warm and welcoming environment, an element of sparkle and provide some visual def nition
of place.
- Warm white LED adjustable area lights (type F3A) are mounted to the systems poles in the event
space to provide soft, wide pools of light on the ground for circulation and task illumination, while
remaining a discrete element in the square. The same luminaires (type F6) are mounted to poles at the
central kiosk and cafe seating at the south end of the square for general illumination.
- South of the event space, decorative warm white LED pole luminaires (type F8) are mounted in
the existing planters, providing illumination for circulation. The luminaires have no uplight to help
minimize light pollution and are transitional or traditional in style to complement the surrounding historic
architecture.
- When the stage is not being lighted by theatrical lighting during events, surface mounted warm white
LED downlights (type F5) are located on the canopy structure for ambient illumination.
Accent Lighting:
Featuring some of the landscape and architectural elements with light enlivens the park at night. Different
levels of brightness will create a visual hierarchy, supporting the focal points of the design.
- Existing trees in raised planters are highlighted using adjustable power pipe mounted warm white LED
landscape lights (type F4). Lighting the tree canopies in this way helps increase the sense of brightness
and security along the circulation paths.
- Linear warm white LED tape light (type F9) is concealed under the stone caps of the planters and seat
walls to illuminate them and the ground below. This halo lighting effect encourages passage through the
square, providing vertical brightness and interest along the walking path. The same tape light is used
under the stairs at the stage to create a ‘f oating’ appearance’ and help enhance this focal point in the
square.
- Key features and elements of the historic building facades are highlighted using warm white linear
LED grazing luminaires (type F2). Discussions with the building owners will be required to coordinate
the power and mounting needs.
- The ‘Old Town Square’ signs on the low walls at the two ends of the square are highlighted using warm
white LED tape light (type F7) mounted under the stone caps providing a wash of light vertically onto
the letters.
Events
For special events or during holidays gobos are projected into the event space with adjustable LED
luminaires (type F3B). The light can be warm white or color changing. The luminaires are mounted to
the system poles along with the general area lights.
Security
All proposed lighting will be dimmable to create various levels of light throughout the evening hours. The
illumination level can be increased after businesses close to encourage pedestrian disbursement and
assist with law enforcement. Decorative elements of the lighting design can be switched off after hours,
saving energy, while keeping key luminaires on for general circulation illumination.
All luminaires in the square will be controlled using a simple and cost effective dimming system. The
control system will be capable of providing on/off and continuous dimming. The luminaires will be
able to be controlled from a wall station in the Downtown Development Authority off ces and from an
authorized smart phone or tablet device using a secure WiFi internet connection.
6
5
4
3
2
1
PROJECT RECORD DRAWINGS
This record drawing has been prepared,
in part, based upon information
furnished
by others. While this information is
believed to be reliable, the Architect
assumes no responsibility for the
accuracy of this record drawing or for
any errors or omissions that may have
been incorporated into it as a result of
incorrect information provided to the
Architect. Those relying on this record
document are advised to obtain
independent verification of its accuracy.
D
CONSULTANTS
PROJECT INFORMATION
MENS
WOMENS
MAIL BOX
RELOCATED
Fort Collins, CO 80524
U
P
LAMP POST
TO BE RELOCATED
Renovation Project
C
BRIDGE ABOVE
Old Town Square
FIRE ALARM PANEL
RELOCATED
PROGRESS PRINTS
NOT FOR
CONSTRUCTION
B
Revisions
JAN.
1
No.
Date
Description
OLD TOWN RESTROOMS - BUILDING 23
1/4" = 1'-0"
Issue Description
DESIGN DEVELOPMENT
Issue Date
10.24.14
Project No
A
Drawn By
SPC
Checked By
JAC
Drawing Title
01 January, 2000
RESTROOM FLOOR PLAN
AND SPECIFICATIONS
Sheet Number
A1.1
PLUMBING SYSTEMS LEGEND
CW
WASTE
VENT
90° ELBOW DN
AHU
AIR HANDLING UNIT
AAV
AIR ADMITTANCE VALVE
1/2"
1/2"
1-1/2"
1-1/2"
90° ELBOW UP
AS
AIR SEPARATOR
ABV
ABOVE
CS
CLOTHES WASHER ROUGH-IN
1/2"
1/2"
2"
1-1/2"
TEE DOWN
B
BOILER (HOT WATER)
AFF
ABOVE FINISHED FLOOR
DF
DRINKING FOUNTAIN / E.W.C.
-
1/2"
1-1/2"
1-1/2"
TEE UP
BB
BASE BOARD
AFG
ABOVE FINISHED GRADE
DM
DISH MACHINE ROUGH-IN
3/4"
3/4"
2"
1-1/2"
BUTTERFLY VALVE
BT
BUFFER TANK
AUTO
AUTOMATIC
DW
DISHWASHER ROUGH-IN
1/2"
-
2"
1-1/2"
SHUT OFF (BALL, GATE, BUTTERFLY)
CC
COILING COIL
BCS
BUILDING CONTROL SYSTEM
FD
FLOOR DRAIN
-
-
2"
1-1/2"
GLOBE VALVE
CH
CHILLER
BDD
BACK DRAFT DAMPER
FS
FLOOR SINK
-
-
3"
2"
CHECK VALVE
CP
CIRC PUMP
BFG
BELOW FINISHED GRADE
HB
HOSE BIB
-
3/4"
-
-
FLOW CONTROL VALVE
CT
COOLING TOWER
BLDG
BUILDING
HS
HAND SINK
1/2"
1/2"
1-1/2"
1-1/2"
BALL VALVE
CUH
CABINET UNIT HEATER
B/N
BETWEEN
KS
KITCHEN SINK W/ OR W/O DISPOSER
1/2"
1/2"
2"
1-1/2"
PLUG OR BALANCING VALVE
CV
CONSTANT VOLUME BOX
C
COMMON (OR CLOSED)
LAV
LAVATORY
1/2"
1/2"
1-1/2"
1-1/2"
FLOW BALANCING VALVE
DC
DUCT COIL
CA
COMBUSTION AIR
MSB
MOP SERVICE BASIN
3/4"
3/4"
3"
2"
PLUG VALVE IN RISER
DEF
DISHWASHER EXHAUST FAN
CC
CONTROLS CONTRACTOR
SH
SHOWER / BATHTUB
3/4"
3/4"
2"
1-1/2"
GATE OR GLOBE VALVE IN RISER
EBH
ELECTRIC BASEBOARD HEATER
CDBBC
SS
SERVICE SINK
1/2"
1/2"
3"
2"
DRAIN VALVE W/ HOSE END
ECU
EVAPORATIVE COOLING UNIT
CONTINUATION DESIGN BUILD
BY CONTRACTOR
GLS
GEOTHERMAL (OR GROUND) LOOP SUPPLY
CFM
CUBIC FEET PER MINUTE (AIR FLOW RATE)
TD
TROUGH DRAIN
-
-
3"
2"
TEMPERATURE CONTROL VALVE (2-WAY)
EF
EXHAUST FAN
GLR
GEOTHERMAL (OR GROUND) LOOP RETURN
CIP
CAST IN PLACE
UR
URINAL (BLOWOUT)
-
1"
2"
1-1/2"
TEMPERATURE CONTROL VALVE (3-WAY)
ERU
ENERGY RECOVERY UNIT
CLG
CEILING (OR COOLING)
UR
URINAL (WASHDOWN)
-
3/4"
2"
1-1/2"
PRESSURE REDUCING VALVE
ET
EXPANSION TANK
HWS
HEATING WATER SUPPLY
CO
CLEANOUT
UR
URINAL (WATERLESS)
-
-
2"
1-1/2"
SOLENOID VALVE
EWH
ELECTRIC WATER HEATER
HWR
HEATING WATER RETURN
CONC
CONCRETE
WC
WATER CLOSET (FLUSH VALVE)
-
1"
4"
2"
VENTURI/FLOW INDICATOR
F
FURNACE
HWS(LT)
HEATING WATER SUPPLY (LOW TEMP)
COND
CONDENSATE
WCT
WATER CLOSET (FLUSH TANK)
-
1/2"
4"
2"
PUMP & EQUIPMENT CONNECTOR
FC
FAN COIL
HWR(LT)
HEATING WATER RETURN (LOW TEMP)
CONN
CONNECT (OR CONNECTION)
3/4"
3/4"
2"
1-1/2"
PIPE UNION
FP
FAN POWERED BOX
HWS(HT)
HEATING WATER SUPPLY (HIGH TEMP)
CONTR'R
CONTRACTOR
DOUBLE CHECK BACKFLOW PREVENTER
GF
GLYCOL FEEDER
HWR(HT)
HEATING WATER RETURN (HIGH TEMP)
COTG
CLEANOUT TO GRADE
PIPE ANCHOR
H
HUMIDIFIER
HWS(HP)
HEATING WATER RETURN (HEAT PUMP)
CW
COLD WATER
PIPE EXPANSION JOINT
HC
HEATING COIL
HWR(HP)
HEATING WATER RETURN (HEAT PUMP)
DHR
DOMESTIC HOT WATER RECIRC
FLEXIBLE CONNECTOR
HP
HEAT PUMP
DHW
DOMESTIC HOT WATER
SAFETY RELIEF VALVE
HX
HEAT EXCHANGER
SHWS
SOLAR HEATING WATER SUPPLY
DN
DOWN
AIR VENT
KEF
KITCHEN EXHAUST FAN
SHWR
SOLAR HEATING WATER RETURN
DW
DOMESTIC WATER
PRESSURE - TEMP. TAP
MAU
MAKE-UP AIR UNIT
DWR
DOMESTIC HOT WATER RECIRC
PRESSURE GAUGE W/ PIG TAIL & COCK
MCC
MOTOR CONTROL CENTER
SMS
SNOWMELT SUPPLY
(E)
EXISTING
MV
MIXING VALVE
SMR
SNOWMELT RETURN
EA
EXHAUST AIR
P
PUMP
EAT
ENTERING AIR TEMPERATURE
VACUUM BREAKER
RF
RETURN (OR RELIEF) AIR FAN
FCS
FLOOR COOLING SUPPLY
EC
ELECTRICAL CONTRACTOR
STRAINER W/ BLOW-OFF VALVE
RZ
RADIANT ZONE
FCR
FLOOR COOLING RETURN
EWT
ENTERING WATER TEMPERATURE
SHOCK ABSORBER
SA
SNOWMELT AREA
EXH
EXHAUST
FLOW SWITCH
SB
SUMP BASIN
(F)
FUTURE
FA
FREE AREA
FBO
FURNISHED BY OWNER
FCO
FLOOR CLEANOUT
FCT
FOR CONTINUATION
FD
FIRE DAMPER
FFI
FOR FURTHER INFORMATION
FSD
COMBINATION FIRE/SMOKE DAMPER
GC
GENERAL CONTRACTOR
GHX
GROUND HEAT EXCHANGER
MG
MEDIUM PRESSURE GAS
GPM
GALLONS PER MINUTE (WATER FLOW RATE)
PG
PROPANE GAS
HP
HORSEPOWER
LPG
LIQUID PROPANE GAS
HW
HOT WATER
HWC
HOT WATER RECIRC
ILO
IN LIEU OF
KW
KILOWATTS
LAT
LEAVING AIR TEMPERATURE
LF
2.
WORK SINK
MINIMUM DOMESTIC PIPE SIZE TO (2) OR MORE FIXTURES IS 3/4".
RE: MANUFACTURER'S INSTALLATION INSTRUCTIONS FOR INDIRECT WASTE
SIZES.
4.
WASTE AND VENT SIZES SHOWN ABOVE APPLY TO INDIVIDUAL VENTING ONLY.
WHERE ALLOWED, INDIVIDUAL VENT CONNECTIONS MAY BE OMITTED OR
SIZES MAY VARY WHEN CIRCUIT VENTS, COMMON VENTS, WASTE STACK
VENTS, WET VENTS, OR COMBINATION DRAIN AND VENT SYSTEMS ARE USED.
PRIOR APPROVAL FROM THE ENGINEER IS REQUIRED TO USE THESE
ALTERNATIVE VENTING METHODS.
S
THERMOMETER
5.
PROVIDE TRAP PRIMER FOR ALL FLOOR DRAINS AND FLOOR SINKS NOT
LOCATED IN FOOD SERVICE AREAS.
6.
MINIMUM SIZE FOR WASTE AND VENT PIPING BENEATH SLAB IS 2".
7.
ALL FIXTURES LISTED ARE NOT NECESSARILY USED ON THIS PROJECT.
HORIZONTAL CLEANOUT
SF
SUPPLY FAN
8.
REFER TO APPLIANCE SCHEDULES (BY OTHERS) FOR ADDITIONAL PLUMBING
FIXTURE CONNECTIONS SUCH AS INST-HOTS, COFFEE MAKERS, AND
GARBAGE DISPOSALS.
VERTICAL CLEANOUT
SP
SUMP PUMP
FLOOR DRAIN
ST
STORAGE TANK
FLOOR SINK
TMV
THERMOSTATIC MIXING VALVE
ROOF DRAIN
UH
UNIT HEATER
DECK/ROOF DRAIN ABOVE
VR
VARIABLE VOLUME BOX W/ REHEAT
TEMPERATURE CONTROLLER OR SENSOR
VV
VARIABLE VOLUME BOX
WH
WATER HEATER
FS
PROVIDE ICE MAKER BOX ROUGH IN W/ 1/2"CW CONNECTION FOR ALL
REFRIGERATOR LOCATIONS.
TC
H
ISSUE LOG
W
PLUMBING SHEET INDEX
T
SE
IEW
EV
DD
R
√
P1.01
PLUMBING SITE PLAN - NORTHEAST
√
P1.02
PLUMBING SITE PLAN - NORTHWEST
√
P1.03
PLUMBING SITE PLAN - SOUTHEAST
P1.04
PLUMBING SITE PLAN - SOUTHWEST
P6.01
PLUMBING DIAGRAMS AND SCHEDULES
P6.02
PLUMBING DIAGRAMS AND SCHEDULES
H
HOSE BIBB
PLAN SYMBOLS
WALL HYDRANT
STEAM TRAP:
FT-FLOAT & THERMOSTATIC
TD-THERMODYNAMIC
IB-INVERTED BUCKET
TS-THERMOSTATIC
BP-BALANCED PRESSURE
30
PLUMBING SPECIFICATIONS
B
STEAM TRAP TEST CHAMBER
%
TITLE
NOTES
1.
ALL SYMBOLS, ABBREVIATIONS, AND DESIGNATIONS
ON LEGEND SHEET ARE NOT NECESSARILY USED ON
THIS PROJECT.
2.
THIS DRAWING SET CONSISTS OF DATA GENERATED, IN
PART, BY OTHER PARTIES. NOT ALL SYMBOLOGIES AND
NOTATION CONVENTIONS OCCURRING IN THIS
DRAWING SET ARE NECESSARILY DEFINED ON THESE
LEGENDS. CONSULT THE ENGINEER IN THE EVENT
SYMBOLOGY OR NOTATION INTERPRETATION IS
REQUIRED.
CONTROL PANEL/RADIANT MANIFOLD
CO2
CO
CARBON DIOXIDE SENSOR
CARBON MONOXIDE SENSOR
H
HUMIDISTAT
S
REMOTE TEMPERATURE SENSOR
T
THERMOSTAT
SP
P
EPO
DUCT STATIC PRESSURE SENSOR
ROOM PRESSURE SENSOR
EMERGENCY POWER OFF SWITCH
P
-
PLUMBING/HVAC RISER
-
DIAGRAM CONTINUATION REFERENCE
-
SECTION CUT LETTER/SHEET SHOWN ON
POINT OF DISCONNECTION
POINT OF NEW CONNECTION
ACCESS PANEL
SNOWMELT MANIFOLD
' √ ' ISSUED AS PART OF A SET
' ' NOT PART OF SET
' * ' ISSUED FOR INFORMATION ONLY
DATE
ISSUE LOG KEY:
10.24.2014
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300P000.dwg Printed By: eng-acr October 23, 2014 - 4:55pm LC-XXX
SIZES SHOWN ARE MINIMUM PIPE SIZES TO A SINGLE FIXTURE. LARGER
SIZES MAY BE INDICATED ON PLANS WHERE REQUIRED.
3.
9.
P0.01
HYDRONIC PIPING
BAR SINK
1.
PLUMBING COVER SHEET
PIPING DESIGNATIONS
REFERENCE SAMPLE
DUCT/PIPE RISER DESIGNATION KEY
RE: B/M400 FFI
FFI = FOR FURTHER INFORMATION
FCT = FOR CONTINUATION
DESIGNATION:
CH
DW
HW
G
WV
PR
ST
S2
SHEET NUMBER
DRAWING NUMBER OR
DIAGRAM LETTER
REFER TO:
PROJECT ALTITUDE
XXXX'
-
CHILLED WATER
DOMESTIC WATER
HEATING WATER
GAS
WASTE AND/OR VENT
PIPING RISER (MISC TYPES)
STORM DRAIN
SECONDARY STORM DRAIN
PR
203
ABOVE SEA LEVEL
RISER NUMBER
CS
CONDENSER SUPPLY
CR
CONDENSER RETURN
CHS
CHILLED WATER SUPPLY
CHR
CHILLED WATER RETURN
CCS
CLOSED CONDENSER SUPPLY
CCR
CLOSED CONDENSER RETURN
GLS
GROUND LOOP SUPPLY
GLR
GROUND LOOP RETURN
GF
PROJECT RECORD DRAWINGS
CONSULTANTS
GLYCOL FEED
BEAUDIN
G ANZE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
HIGH PRESSURE STEAM
HPR
HIGH PRESSURE CONDENSATE RETURN
MPS
MEDIUM PRESSURE STEAM
MPR
MEDIUM PRESSURE CONDENSATE RETURN
LPS
LOW PRESSURE STEAM
LPR
LOW PRESSURE CONDENSATE RETURN
PC
PUMPED CONDENSATE
PLUMBING PIPING
G
PD
COPYRIGHT 2014
PROJECT INFORMATION
STEAM & CONDENSATE PIPING
HPS
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
Fort Collins, CO 80524
HW
NOTES:
P0.00
PLAN ABBREVIATIONS
BS
WS
#
EQUIPMENT ABBREVIATIONS
Renovation Project
ABBREV.
PIPING SYMBOLS
Old Town Square
FIXTURE CONNECTION SCHEDULE
NATURAL GAS
PROPANE DRAIN
Revisions
D
DRAIN PIPE
DS
SOLID DRAIN PIPE
LINEAR FOOT
FOS
FUEL OIL SUPPLY
LWT
LEAVING WATER TEMPERATURE
FOR
FUEL OIL RETURN
MC
MECHANICAL CONTRACTOR
FOV
FUEL OIL VENT
MFG
MANUFACTURER
FOF
FUEL OIL FILL
MOD
MOTOR OPERATED DAMPER
(N)
NEW
RS
REFRIGERANT SUCTION
NC
NORMALLY CLOSED
RL
REFRIGERANT LIQUID
NEC
NATIONAL ELECTRIC CODE
NIC
NOT IN CONTRACT
GWS
GROUND WATER SUPPLY
NO
NORMALLY OPEN
GWR
GROUND WATER RETURN
OA
OUTSIDE AIR
OBD
OPPOSED BLADE VOLUME DAMPER
CW
DOMESTIC WATER
OC
ON CENTER
HW
DOMESTIC HOT WATER
OSA
OUTSIDE AIR
HWC
RA
RETURN AIR
140° HW
RE:
REFER TO:
REQ'D
REQUIRED
REQ'MTS
REQUIREMENTS
SA
SUPPLY AIR
SF
SQUARE FOOT (FEET)
SP
STATIC PRESSURE
W
WASTE PIPE
SS
STAINLESS STEEL
V
PLUMBING VENT PIPE
TA
THROW-AWAY (TRANSFER AIR)
AW
ACID WASTE PIPE
TYP
TYPICAL
AV
ACID VENT PIPE
UNO
UNLESS NOTED OTHERWISE
GW
GREASE WASTE PIPE
W/
WITH
GV
GREASE VENT
W/O
WITHOUT
ST
STORM DRAIN PIPE
WCO
WALL CLEANOUT
ST(OF)
WRT
WITH REGARD TO
SD
NS
No.
Date
DHW RECIRCULATION
Description
30% DD REVIEW SET
DOMESTIC HOT WATER (TEMP. SHOWN)
10/24/14
NON-SOFTENED DOMESTIC WATER
9503.00
F
PW
FIRE LINE
PRESSURIZED WASTE
STORM DRAIN OVERFLOW
JAC
Drawing Title
PLUMBING
COVER SHEET
Sheet Number
SECONDARY DRAIN
P0.00
REE
PROJECT RECORD DRAWINGS
NEW VAULT - MECHANICAL SCOPE OF WORK
A.
RECONNECT TO FOUNTAIN. SUPPLY (2") AND RETURN PUMP PIPING (6) AND FILTER LINE(2').
B.
PENN ZYPHOR CEILING EXHAUST FAN DUCTWORK, LOUVER/SCREENS. (8x8)
C.
INTAKE LOUVER/SCREENS - DUCTWORK. (8x8)
D.
WALL HYDRANT REQUIRED BY DESIGN.
E.
RECONNECT FOUNTAIN DRAIN LINE (4").
F.
ALL FOUNTAIN PIPING BY OTHERS.
G.
ELECTRIC HEAT REQ (3KW)
CONSULTANTS
BEAUDIN
G ANZE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
EXISTING VAULT: DEMO BY GC.
NEW FOUNTAIN VAULT
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
B
B
H
Fort Collins, CO 80524
Renovation Project
Old Town Square
H
B
H
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300P101.dwg Printed By: eng-acr October 23, 2014 - 4:55pm LC-XXX
H
B
PROJECT INFORMATION
Revisions
No.
Date
Description
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
PLUMBING
SITE PLAN
NORTHEAST
Sheet Number
P1.01
REE
PROJECT RECORD DRAWINGS
CONSULTANTS
BEAUDIN
G ANZE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
Fort Collins, CO 80524
Renovation Project
Old Town Square
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300P102.dwg Printed By: eng-acr October 23, 2014 - 4:56pm LC-XXX
PROJECT INFORMATION
Revisions
No.
Date
Description
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
PLUMBING
SITE PLAN
NORTHWEST
Sheet Number
P1.02
REE
ELECTRICAL SYSTEMS LEGEND
LIGHTING FIXTURE SYMBOLS
POWER SYMBOLS
CEILING MOUNTED CAMERA
TELEPHONE WALL OUTLET
RECESSED LIGHTING FIXTURE
SINGLE RECEPTACLE
AFC
- ABOVE FINISHED CEILING
WALL MOUNTED CAMERA
DOUBLE TELEPHONE WALL OUTLET
DIRECTIONAL/ADJUSTABLE RECESSED LIGHTING FIXTURE
DUPLEX RECEPTACLE
AFF
- ABOVE FINISHED FLOOR
MAGNETIC DOOR CONTACT SWITCH
TELEPHONE FLOOR OUTLET
SURFACE MOUNTED LIGHT
DUPLEX RECEPTACLE MOUNTED ABOVE COUNTER
AFG
- ABOVE FINISHED GRADE
I
INTRUSION MOTION SENSOR
DATA WALL OUTLET
PENDANT MOUNTED LIGHT
DOUBLE DUPLEX RECEPTACLE
AHJ
- AUTHORITY HAVING JURISDICTION
K
SECURITY KEYPAD
DATA WALL OUTLET
WALL MOUNTED LIGHT
GFCI DUPLEX RECEPTACLE
AL
- ALUMINUM
MON
CCTV MONITOR
DATA FLOOR OUTLET
WALL MOUNTED UP-LIGHT
DUPLEX RECEPTACLE; HALF SWITCHED
AP
- ACCESS POINT
NVR
NETWROK VIDEO RECORDER
COMBO PHONE/DATA OUTLET
MONO-POINT LIGHTING FIXTURE
ISOLATED GROUND DUPLEX RECEPTACLE
AWG - AMERICAN WIRE GAUGE
APS
AUXILIARY POWER SUPPLY
DOUBLE COMBO PHONE/DATA OUTLET
RECESSED STEP LIGHT
MULTI-OUTLET PLUG STRIP
BAS
- BUILDING AUTOMATION SYSTEM
ACP
ACCESS CONTROL MAIN PANEL
COMBO PHONE/DATA FLOOR OUTLET
FLUORESCENT STRIP LIGHT
FLUSH FLOOR MOUNTED DUPLEX RECEPTACLE
BFG
- BELOW FINISH GRADE
REX
EXIT PANIC/CRASH BAR SENSOR
VOICE/DATA/FIBER OUTLET
WALL MOUNTED LINEAR FLUORESCENT LIGHT
FLUSH FLOOR MOUNTED DOUBLE DUPLEX RECEPTACLE
BMS
- BUILDING MANAGEMENT SYSTEM
CPU
SECURITY CENTRAL PROCESSING UNIT
POS
POINT OF SALE (POS) OUTLET
FLUSH FLOOR MOUNTED DUPLEX RECEPTACLE; HALF SWITCHED
C
- CONDUIT
WS
SECURITY/ACCESS CONTROL WORKSTATION
ATM
AUTOMATED TELLER MACHINE (ATM) STATION
FLUSH FLOOR MOUNTED DUPLEX RECEPTACLE AND TELECOM
CATV - COMMUNITY (CABLE) ANTENNA TELEVISION SYSTEM
S
R
M
P
PP
C
RECESSED OR SURFACE MOUNTED FLUORESCENT TROFFER
FIXTURE WITH EMERGENCY BACKUP OR ON EM CIRCUIT
PUBLIC PAYPHONE OUTLET
CEILING MOUNTED EXIT SIGN W/ FACES & ARROWS AS SHOWN
WALL MOUNTED SPECIAL OUTLET AS NOTED
CCTV - CLOSED CIRCUIT TELEVISION
SPECIAL OUTLET AS NOTED
CKT
- CIRCUIT
CR
CARD READER
(P = PROXIMITY, S = SWIPE)
E
ELEVATOR PHONE OUTLET
WALL MOUNTED EXIT SIGN W/ FACES & ARROWS AS SHOWN
L
ELECTRIC LOCK
(S = STRIKE, M = MAGNETIC)
F
FAX/COPIER OUTLET
EMERGENCY LIGHTS
J
JUNCTION BOX
CPU
- CENTRAL PROCESSING UNIT
L
ELECTRIC LATCH / ROD RETRACTOR
EMERGENCY SERVICES PHONE OUTLET
EXTERIOR POLE MOUNTED LIGHT
J
WALL MOUNTED JUNCTION BOX
CT
- CURRENT TRANSFORMER
S
MAGNETIC DOOR CONTACT SWITCH
POWER/TELECOM POLE
EXTERIOR POST (BOLLARD) MOUNTED LIGHT
J
FLOOR MOUNTED JUNCTION BOX
DISP
- GARBAGE DISPOSAL
PANIC BUTTON
WIRELESS LAN (WI-FI) ACCESS POINT OUTLET
-
DIVISION 15 EQUIPMENT POWER CONNECTION
DW
- DISHWASHER
TIMER SWITCH
(E)
- EXISTING
FUSED DISCONNECT
EM
- EMERGENCY
NON FUSED DISCONNECT
EWC
- ELECTRIC WATER COOLER
MOTOR STARTER
FA
- FIRE ALARM
EM
LIGHTING CONTROL SYMBOLS
MULTI-OUTLET WIREWAY
SWITCH
S
INTERCOM/PROGRAM/BELL/CLOCK SYMBOLS
TS
S
3
THREE-WAY SWITCH
ANALOG CLOCK - WALL MOUNTED
S
4
FOUR-WAY SWITCH
ANALOG CLOCK - CEILING MOUNTED
S
J
DOOR JAMB SWITCH
CB
ENCLOSED CIRCUIT BREAKER
FACP - FIRE ALARM CONTROL PANEL
D
DIGITAL CLOCK - WALL MOUNTED
S
K
KEY SWITCH
PB
PULL BOX
FBO
- FURNISHED BY OTHERS
D
DIGITAL CLOCK - CEILING MOUNTED
S
V
VARIABLE SPEED SWITCH
PUSH BUTTON
GC
- GENERAL CONTRACTOR
CALL IN SWITCH
S
T
THERMAL OVERLOAD SWITCH
TC
TIME CLOCK
GFI
- GROUND FAULT CIRCUIT INTERRUPTER
MASTER INTERCOM STATION
D
DIMMER
PC
PHOTO-CELL
GRD
- GROUND
TRANSFORMER
IAW
- IN ACCORDANCE WITH
PANELBOARD OR LOADCENTER
IC
- INTERMEDIATE CROSS-CONNECT
CONTACTOR
IDF
- INTERMEDIATE DISTRIBUTION FRAME
C
M IC
3
IC
INTERCOM STATION
D
CH
CHIME
LV
B
BUZZER
S
B
BELL
OS
OCCUPANCY SENSOR - WALL MOUNTED
ELECTRIC MOTOR
IG
- ISOLATED GROUND
S
INTERCOM LOUDSPEAKER - CEILING MOUNTED
OS
OCCUPANCY SENSOR - CEILING MOUNTED
METER
IR
- INFRARED
S
INTERCOM LOUDSPEAKER - WALL MOUNTED
OS
OCCUPANCY SENSOR - CORRIDOR CEILING MOUNTED
THERMOSTAT
LAN
- LOCAL AREA NETWORK
S
TWO-WAY COMM SPEAKER - CEILING MOUNTED
DL
DAYLIGHT PHOTO SENSOR
AUTOMATIC TRANSFER SWITCH
MDF
- MAIN DISTRIBUTION FRAME
S
TWO-WAY COMM SPEAKER - WALL MOUNTED
CIRCUIT HOMERUN
(N)
- NEW
HORN-TYPE SPEAKER
CONDUIT RUN
NIC
- NOT IN CONTRACT
CONDUIT RUN BELOW GRADE
NL
- NIGHT LIGHT
MIC
MIC
O
THREE-WAY DIMMER
N
T
LOW VOLTAGE SWITCH
WALL OCCUPANCY SENSOR/SWITCH
C
T
ATS
AUDIOVISUAL SYMBOLS
ISSUE LOG
DD
TITLE
E0.00
ELECTRICAL COVER SHEET
E0.01
ELECTRICAL SPECIFICATIONS
√
NTS
- NOT TO SCALE
TV
TELEVISON OUTLET - CEILING MOUNTED
CONDUIT DOWN
OC
- ON CENTER
TV
TELEVISION OUTLET - FLOORBOX
S
SWITCH
PA
- PUBLIC ADDRESS
AV
AUDIOVISUAL OUTLET - WALL MOUNTED
S
T
THERMAL OVERLOAD SWITCH
REF
- REFRIGERATOR
AV
AUDIOVISUAL OUTLET - CEILING MOUNTED
S
V
VARIABLE SPEED SWITCH
TTB
- TELECOMMUNICATIONS TERMINAL BOARD
AV
AUDIOVISUAL OUTLET - FLOORBOX
S
K
KEY SWITCH
TVSS - TRANSIENT VOLTAGE SURGE SUPPRESSOR
S
LOUDSPEAKER - CEILING MOUNTED
SPK
S
ELECTRICAL SITE PLAN - NORTHEAST
√
E1.02
ELECTRICAL SITE PLAN - NORTHWEST
√
E1.03
ELECTRICAL SITE PLAN - SOUTHEAST
√
E1.04
ELECTRICAL SITE PLAN - SOUTHWEST
√
E6.01
ELECTRICAL DIAGRAMS AND SCHEDULES
√
E6.02
ELECTRICAL DIAGRAMS AND SCHEDULES
LR
CTR
ONE-LINE DIAGRAM SYMBOLS
DATE
10.24.2014
' √ ' ISSUED AS PART OF A SET
' ' NOT PART OF SET
' * ' ISSUED FOR INFORMATION ONLY
UG
- UNDERGROUND
LOUDSPEAKER OUTLET
DISCONNECT SWITCH
UNO
- UNLESS NOTED OTHERWISE
LOUDSPEAKER - POWERED SUBWOOFER
FUSE
V
- VOLT
LOUDSPEAKER BAR - LEFT/CENTER/RIGHT
CIRCUIT BREAKER
W
- WATT
LOUDSPEAKER BAR - STEREO
CURRENT TRANSFORMER
WAN
- WIDE AREA NETWORK
LOUDSPEAKER BAR - CENTER CHANNEL
POTENTIAL TRANSFORMER
WAP
- WIRELESS ACCESS POINT
Revisions
No.
M
MICROPHONE OUTLET - FLOORBOX
M
METER
WLAN - WIRELESS LOCAL AREA NETWORK
M
MICROPHONE OUTLET - WALL MOUNTED
V
VOLT-METER
WP
- WEATHERPROOF
INTERACTIVE (ELECTRONIC) WHITEBOARD
A
AMP-METER
XP
- EXPLOSIONPROOF
PROJECTION SCREEN, TELEVISION, OR OTHER DISPLAY EQPT
SS
SURGE SUPPRESSION DEVICE
+18"
- MOUNTING HEIGHT TO CENTERLINE OF
DEVICE ABOVE FINISH FLOOR (VERIFY W/ ARCH ELEVS)
SPEAKER ZONE HOMERUN
COPYRIGHT 2014
TVTB - TELEVISION TERMINAL BOARD
VIDEO PROJECTOR
ISSUE LOG KEY:
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
PROJECT INFORMATION
CONDUIT UP
LOUDSPEAKER - WALL MOUNTED
BEAUDIN
G ANZE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
TELEVISION OUTLET - WALL MOUNTED
LCR
E1.01
CONSULTANTS
TV
S
%
30
#
RE
VIE
W
SE
T
ELECTRICAL SHEET INDEX
PROJECT RECORD DRAWINGS
Old Town Square
P
OF
ADA ACCESS CONTROL MAIN PANEL
ADA
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E000.dwg Printed By: eng-acr October 23, 2014 - 4:56pm LC-XXX
ABBREVIATIONS
Fort Collins, CO 80524
VOICE/DATA SYMBOLS
Renovation Project
ELECTRONIC SAFETY & SECURITY SYMBOLS
NOTE:
ALL SYMBOLS SHOWN ON LEGEND ARE
NOT NECESSARILY USED.
SELECTOR SWITCH
GF
GROUND FAULT PROTECTION
ST
SHUNT TRIP
NORMALLY OPEN CONTACT
LIGHT LINEWEIGHT INDICATES EXISTING.
GROUND
•
HATCHED AREAS INDICATE DEMOLITION.
COLD WATER GROUND CONNECTION
•
'C' ADJACENT TO A DEVICE INDICATES
MOUNTING ABOVE COUNTERTOP.
BUILDING STEEL GROUND CONNECTION
Description
NOTES:
•
NORMALLY CLOSED CONTACT
Date
C
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
COVER SHEET
Sheet Number
E0.00
ACR
NOTES:
1.
ONLY POWER CONNECTIONS ARE SHOWN LIGHT
FIXTURES. REFER TO LIGHTING PLANS FOR
INFORMATION ON FIXTURE MOUNTING AND
TYPE.
2.
SECURITY CAMERA LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
3.
SPEAKER LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
PROJECT RECORD DRAWINGS
FLAG NOTES:
1
PROVIDE CONNECTION FOR POLE MOUNTED LIGHT
FIXTURE.
PROVIDE (2) WEATHERPROOF GFCI RECEPTACLES
AT FIXTURE POLE. ONE RECEPTACLE TO BE
LOCATED LOW AND THE OTHER UP HIGH.
RECEPTACLES SHOWN OFFSET FROM POLE FOR
CLARITY.
PROVIDE CONNECTION FOR FESTOON LIGHTING
POWER SUPPLY ON FIXTURE POLE. CONNECTION
SHOWN OFFSET FROM POLE FOR CLARIFY.
LOCATE NEW PANELS IN
STAGE CLOSET
J
J
J
J
CONSULTANTS
BEAUDIN
G ANZE
PROVIDE CONNECTION FOR LED TAPE LIGHT
POWER SUPPLY.
6
DISCONNECT FOR
PORTABLE SOUND AND
LIGHTING
EXACT LOCATION OF UTILITY
METER, CT CABINET, AND
SERVICE DISCONNECT TO BE
COORDINATED WITH UTILITY
AND PFA
J
PROVIDE CONNECTION FOR REMOTE DRIVER
SERVING SURFACE MOUNTED LED LIGHT AT STAGE.
PROVIDE CONNECTION FOR REMOTE DRIVER
SERVING LANDSCAPE LIGHTS.
PROVIDE RECEPTACLES FOR SOUND BOOTH
POWER.
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
PROJECT INFORMATION
J
J
J
J
J
Fort Collins, CO 80524
J
Revisions
1
1
No.
1
1
J
J
J
J
Date
Description
J
J
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E101.dwg Printed By: eng-acr October 23, 2014 - 4:56pm LC-XXX
J
Renovation Project
Old Town Square
J
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
SITE PLAN
NORTHEAST
Sheet Number
E1.01
ACR
NOTES:
C
C
1.
ONLY POWER CONNECTIONS ARE SHOWN LIGHT
FIXTURES. REFER TO LIGHTING PLANS FOR
INFORMATION ON FIXTURE MOUNTING AND TYPE.
2.
SECURITY CAMERA LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
3.
SPEAKER LOCATIONS AND REQUIRED RACEWAYS TO
BE DETERMINED.
PROJECT RECORD DRAWINGS
FLAG NOTES:
1
PROVIDE CONNECTION FOR POLE MOUNTED LIGHT
FIXTURE.
PROVIDE (2) WEATHERPROOF GFCI RECEPTACLES
AT FIXTURE POLE. ONE RECEPTACLE TO BE
LOCATED LOW AND THE OTHER UP HIGH.
PROVIDE CONNECTION FOR FESTOON LIGHTING
POWER SUPPLY ON FIXTURE POLE.
CONSULTANTS
PROVIDE CONNECTION FOR LED TAPE LIGHT
POWER SUPPLY.
BEAUDIN
G ANZE
PROVIDE CONNECTION FOR REMOTE DRIVER
SERVING LANDSCAPE LIGHTS.
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
PROJECT INFORMATION
J
J
J
J
J
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E102.dwg Printed By: eng-acr October 23, 2014 - 4:56pm LC-XXX
J
J
J
J
1
J
J
J
Fort Collins, CO 80524
J
Renovation Project
J
Old Town Square
J
J
Revisions
No.
J
Date
Description
J
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
SITE PLAN
NORTHWEST
Sheet Number
E1.02
ACR
NOTES:
1.
ONLY POWER CONNECTIONS ARE SHOWN LIGHT
FIXTURES. REFER TO LIGHTING PLANS FOR
INFORMATION ON FIXTURE MOUNTING AND TYPE.
2.
SECURITY CAMERA LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
3.
SPEAKER LOCATIONS AND REQUIRED RACEWAYS
TO BE DETERMINED.
PROJECT RECORD DRAWINGS
FLAG NOTES:
1
PROVIDE CONNECTION FOR POLE MOUNTED LIGHT
FIXTURE.
PROVIDE (2) WEATHERPROOF GFCI RECEPTACLES
AT FIXTURE POLE. ONE RECEPTACLE TO BE
LOCATED LOW AND THE OTHER UP HIGH.
RECEPTACLES SHOWN OFFSET FROM POLE FOR
CLARITY.
PROVIDE CONNECTION FOR FESTOON LIGHTING
POWER SUPPLY.
CONSULTANTS
BEAUDIN
G ANZE
PROVIDE CONNECTION FOR LED TAPE LIGHT
POWER SUPPLY.
PROVIDE CONNECTION FOR REMOTE DRIVER
SERVING LANDSCAPE LIGHTS.
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
3
J
Fort Collins, CO 80524
Renovation Project
Old Town Square
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E103.dwg Printed By: eng-acr October 23, 2014 - 4:57pm LC-XXX
PROJECT INFORMATION
Revisions
No.
WP WP
J
J
Date
Description
J
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
SITE PLAN
SOUTHEAST
Sheet Number
E1.03
ACR
NOTES:
REFEED (E) GROUND
MOUNTED LIGHT FIXTURES
1.
ONLY POWER CONNECTIONS ARE SHOWN LIGHT
FIXTURES. REFER TO LIGHTING PLANS FOR
INFORMATION ON FIXTURE MOUNTING AND
TYPE.
2.
SECURITY CAMERA LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
3.
SPEAKER LOCATIONS AND REQUIRED
RACEWAYS TO BE DETERMINED.
PROJECT RECORD DRAWINGS
FLAG NOTES:
1
PROVIDE CONNECTION FOR POLE MOUNTED LIGHT
FIXTURE.
PROVIDE (2) WEATHERPROOF GFCI RECEPTACLES
AT FIXTURE POLE. ONE RECEPTACLE TO BE
LOCATED LOW AND THE OTHER UP HIGH.
RECEPTACLES SHOWN OFFSET FROM POLE FOR
CLARITY.
CONSULTANTS
BEAUDIN
G ANZE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
PROJECT INFORMATION
WP
WP
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E104.dwg Printed By: eng-acr October 23, 2014 - 4:57pm LC-XXX
1
Fort Collins, CO 80524
DASHED LINE INDICATES POTENTIAL ROUTING FOR MAIN
ELECTRICAL CONDUIT RUNS. SEPARATE CONDUITS WILL
BE PROVIDED FOR LIGHTING CIRCUITS, RECEPTACLE AND
EQUIPMENT CIRCUITS, AND A/V WIRING. IN ADDITION, ONE
SPARE CONDUIT WILL BE PROVIDED FOR FUTURE USE.
Renovation Project
1
Old Town Square
WP
WP
REFEED POWER TO KIOSK
J
Revisions
No.
Date
Description
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
SITE PLAN
SOUTHWEST
Sheet Number
E1.04
ACR
PROJECT RECORD DRAWINGS
ISOLATED GROUND TO BE
PROVIDED TO BOTH PANEL AND
200A DISCONNECT
PP1
200A DISCONNECT FOR
PORTABLE SOUND AND
LIGHTING.
200A
CONSULTANTS
400A BUSSED
GUTTER
(E) UTILITY XFMR
T
M
CT
CAB
BEAUDIN
G ANZE
208/3 MAIN DISCONNECT,
400A 3P, 400A FUSES
NEMA 3R ENCLOSURE
Vail:
Denver:
Fort Collins:
Albuquerque:
Jackson:
www.bgce.com
(970) 949-6108
(303) 278-3820
(970) 221-5691
(505) 323-9070
(307) 739-3944
COPYRIGHT 2014
PROJECT INFORMATION
GROUNDING ELECTRODE
CONDUCTORS SIZED PER
N.E.C. TABLE 250-66.
BLDG. STEEL I.A.W.
N.E.C. 250-52(b)
S:\BGProjects\9503.00 Fort Collins - Old Town Square Renovation\Cad\BGCE CAD\950300E601.dwg Printed By: eng-acr October 23, 2014 - 4:57pm LC-XXX
A
Renovation Project
SCALE: NONE
20 L.F. OF #4 CU
ENCASED IN MIN. 2" OF
CONCRETE. I.A.W. N.E.C.
250-52(c)
Old Town Square
ELECTRICAL ONE-LINE DIAGRAM
Fort Collins, CO 80524
WATER SERVICE I.A.W.
N.E.C. 250-52(a)
Revisions
No.
Date
Description
30% DD REVIEW SET
10/24/14
9503.00
JAC
Drawing Title
ELECTRICAL
DIAGRAMS AND
SCHEDULES
Sheet Number
E6.01
ACR