LIGHTPLANE 9 MONO
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com
LIGHTPLANE 9 MONO
Page 1of 2
1. Style:
TYPE:
LP9M-S - Suspended (LP9M-S)
2. Adjustable Downlight Option (leave blank if none):
MR16: 50W MR16 Halogen GU3.5 Base (MR16)
LED MR16: Retrofit LED MR16 GU3.5 Base, Transformer: 120 volt to 12 volt only for dimming,
lamp supplied by others (LEDMR16)
AR111: 50/75W AR111 Halogen G53 Base (AR111)
PAR30: 50/75W Par 30 SN/LN Halogen Medium Base (PAR30)
S08220: 22W CDM20 TM T3.5 PGJ5 Base (S08220)
S08235: 35W CDM35 TM T3.5 PGJ5 Base (S08235)
S11139: 39W CDM35 TC-T4 G8.5 Base (S11139)
S11170: 70W CDM70 TC-T4 G8.5 Base (S11170)
GX1020: 20W CMH20/MR16 GX10 Base (GX1020)
GX1039: 39W CMH39/MR16 GX10 Base (GX1039)
PAR2039: 39W CDM35/PAR20 Medium Base (PAR2039)
PAR3039: 39W CDM35/PAR30L Medium Base (PAR3039)
PAR3070: 70W CDM70/PAR30L Medium Base (PAR3070)
R11135: 35W CDM-R111/35 GX8.5 Base (R11135)
CZEN1200: 1 x 15W Watt LED Module, 1275LM, 80CRI (MPLEX-CZEN1200)
CZEN1500: 1 x 21.5W Watt LED Module, 1555LM, 80CRI (MPLEX-CZEN1500)
*CZEN2600: 1 x 29W Watt LED Module, 2620LM, 80CRI (MPLEX-CZEN2600)
XC80-900: 1 x 13.5W Watt LED Module, 930LM, 80CRI (MPLEX-XC80-900)
XC80-1400: 1 x 22.9W Watt LED Module, 1420LM, 80CRI (MPLEX-XC80-1400)
*XC80-2200: 1 x 34W Watt LED Module, 2220LM, 80CRI (MPLEX-XC80-2200)
XC95-700: 1 x 16W Watt LED Module, 700LM, 95CRI (MPLEX-XC95-700)
XC95-900: 1 x 21W Watt LED Module, 930LM, 95CRI (MPLEX-XC95-900)
*XC95-1400: 1 x 32.5W Watt LED Module, 1420LM, 95CRI (M PLEX-XC95-1400)
color
3000k
3500k
4000k
beam
20 deg
40 deg
60 deg
Suspended:
DRIVER
Field Cut
MPLEX - Multiplex LED Module (MPLEX) - SEE Diagram 1A.
**CZEN800: Citizen® 8.5W Watt LED Module, 790LM, 40deg beam, 80CRI, 3000K (CZEN800)
**CZEN1000: Citizen® 12W Watt LED Module, 1040LM, 40deg beam, 80CRI, 3000K (CZEN1000)
**CZEN1200: Citizen® 14.8W Watt LED Module, 1275LM, 60deg beam, 80CRI, 3000K (CZEN1200)
**CZEN1500: Citizen® 21.5W Watt LED Module,1555LM, 60deg beam, 80CRI, 3000K (CZEN1500)
**CZEN2600: Citizen® 27.6W Watt LED Module, 2620LM, 60deg beam, 80CRI, 3000K (CZEN2600)
**CZEN4100: Citizen® 51W Watt LED Module, 4090LM, 60deg beam, 80CRI, 3000K (CZEN4100)
**LED1525: Edison® 17W LED, 80CRI, 25° 3000K, 540LM (LED1525)
**LED1540: Edison® 17W LED, 80CRI, 40° 3000K, 540LM (LED1540)
**EDI1500: Edison ® 19W LED, >90CRI, 3000K, 1500LM (EDI1500)
Beam
15 deg (std option)
8 41 "
CZEN = Citizen LED Chip with Zhaga connector
24 deg
36 deg
XC = Xicato LED Module
1A: The Multiplex can be configured with a
65 deg
multitude of Accessories and configurations
Raw lumen and system watts (with driver loss included)
*With Active Cooling consult factory for details
**No Accessory Options Available
For Additional LED options not listed, please consult LED MATRIX online or Factory
3. Reflector Option for Metal Halide T-Lamps:
*F - Flood (F)
*N - Narrow Flood (NF)
*S - Spot (S)
* Variations exist in beam spreads depending on lamp source. Not all beams available on
all heads
4. Adjustable Downlight Accessory Option (Please Note Compatibility):
*HEX - Hexcell Louvers (HEX)
*SNOOT - Snoot (SNT)
*SOLITE - Solite Lens (SOL)
*LSS - Linear Spread Lens (LSS)
AIMING ANGLES:
20W and Lower Passive and Active (internal fan)
cooled units = 45 deg aiming angle within RCS
**Not Available in CZEN 1200 and above, Not Available in LED1525/40 or EDI1500
30W Passively cooled units add an addition heat sink
accessory which limits aiming dependent on
specification.
5. Adjustable LED Downlight Driver Specification (Leave blank for non LED):
TRIAC – Standard Option: 15%-100% - 120 volt only (TRIAC)
*HILUME-A2- Lutron Hi-lume® A LTE Series LED line voltage 2-wi re control 120V only 1%-100% (HILUME-A2)
HILUME-A3- Lutron Hi-lume® A L3D Series LED EcoSystem® or 3-wire control 1%-100% (HILUME-A3)
LED-DIM - EldoLED Power Supply with 0-10V dimming (LED-DIM)
0% Premium Option
**10% Standard Option
1% Premium Option
LED-DALI - LED Power Supply with DALI dimming 0%-100% (LED-DALI)
LED-DMX - LED Power Supply with DMX dimming 0%-100% (LED-DMX)
*Consult dimming control manufacturer for compatibility with Lutron Hi-lume A LTE forward phase control LED driver.
**Not available with CZEN800 and CZEN1000
CONTINUED ON NEXT PAGE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com
LIGHTPLANE 9 MONO
Page 2 of 2
TYPE:
6. Voltage:
*120 - 120 volt (120)
**277 - 277 volt (277)
UNV - Universal voltage (UNV)
347 - 347 volt (not available in dimming) (347)
*For LED MR16 Downlight dimming, consult LED Retrofit Lamp manufacturer for dimmer compatibility
**Dimming not available in LEDMR16, However the CZEN800 or CZEN1000 can be dimmed
on 277V if specified with a programmable driver such as EldoLED or Lutron Hilume A series
7.Finish:
* AL - Natural “Ultimatte” aluminum (AL)
BK - Black powdercoat (BK)
WH - White powdercoat (WH)
RAL - Specify RAL # of powdercoat of your choice (RAL)
* AL is standard on all Lightplane 9 products
8. Additional Options:
*OS - Occupancy Sensor(OS)
*PH - Photocell - Consult Factory (PH)
SB - Seismic Bracing - Consult Factory (SB)
*Limitations exist depending on size and specification.
Consult factory for details.
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Consult Factory for
angle options.
*8FT suspension hardware is standard on all
ALW suspended fixtures
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com