SKR Filter Housing - Meissner Filtration Products

advertisement
Filter Housing
S KR
S
ne
ry, Inli
anit a
, S ing le Ca rtr i d ge, 3 16L Stai nl ess Ste
el
This sanitary filter housing is used for the clarification, sterilization
and high purity filtration of liquids and gases, including fermentor air
and tank venting. The housing is designed to accept an SKR-style filter
cartridge, which utilizes a unique flange sealing mechanism to prevent
fluid by-pass downstream of the filter. This sealing mechanism offers the
highest reliability and security for continuous, point-of-use or small batch
processing applications.
Design Features
• Accepts one 2.5" or 5" SKR filter cartridge or competitive flange-seal
filter cartridge
• Flow rates to 8 gpm (30 L min-1) for liquids, or 80 scfm (136 Nm3 hr-1) for gases
• Quick-release clamp closure allows easy disassembly and fast
filter replacement
• Minimal fluid hold-up volume
• Completely electropolished 316L stainless steel construction provides
maximum durability and corrosion resistance
• True sanitary design prevents entrapment or build-up of contaminants
• Standard hose barb or optional sanitary flange vent and drain permit
easy venting, draining, sampling or integrity testing operations
Water Flow Rates*
Air Flow Rates*
L min -1
Nm 3 hr -1
22.7
30.3
.4
37.9
27.6
.3
20.7
13.8
.1
6.9
0
68
102
136
170
68.9
1
51.7
.75
0 psig outlet
30 psig inlet
34.5
.5
60 psig inlet
17.2
.25
0
0
2
6
4
Flow Rate, gpm
8
10
0
20
40
60
80
100
Flow Rate, scfm
*Graphs are valid for 2.5" and 5" housings;
skirt-flange loss factored into pressure drop
Δp (mbar)
.2
34
Initial Differential Pressure, psid
15.1
Δp (mbar)
Initial Differential Pressure, psid
7.6
Sanitary, Inline, SKR Filter Housing
Specifications
sanitary flange-style adapter. The
cartridge filter is secured in place when
the housing is fully assembled.
Materials of Construction
Head & Bowl:
316L stainless steel
Cast Clamp:
304 stainless steel
Closure O-ring: Silicone standard*
Valve Seal Tip: Teflon®
Valve O-ring:
Silicone standard*
*Buna, EPR, Viton® or Teflon® are optional
Sterilization
The housing can be inline steam sterilized,
autoclaved or hot water sanitized.
Mounting
The housing can be mounted and
supported on suitably braced, rigid,
inline pipe connections.
Surface Finish
Wetted surfaces are polished to
≤ 25 µin Ra finish. Exterior surfaces
are polished to buffed-mirror finish.
All surfaces are electropolished.
Options
In addition to our standard housings,
Meissner Filtration Products, Inc. designs
and manufactures specially engineered
filter housings to meet unique design
or process requirements. Variations
Cartridge Length
2.5" (6 cm) =
include, but are not limited to: thermal
5" (13 cm) =
jacket options, custom surface finishes
to 10 µin Ra, custom connections such
as RF flange or other special fittings,
and custom vent and drain placements.
If you need a housing with a unique
combination of features, Meissner will
custom engineer it to meet your specific
requirements. Contact us for more details.
Service Ratings
Liquid: 250 psig at 70 ˚F (17 bar @ 21˚C)
Air/gas: 125 psig at 70 ˚F (9 bar @ 21˚C)
Connections
Inlet/Outlet: 1.5" sanitary flange (SF)
Vent/Drain Valve: 1/4" hose barb standard
Cartridge Length (Nominal)
2.5" or 5" (6 cm or 13 cm)
Cartridge Connections
Accepts single-open-ended (SOE)
cartridge filter having a 2.25" (5,7 cm)
outer diameter and fitted with a
Inlet
6.0" (15 cm)
8.4" (21 cm)
3.0"
(8 cm)
Safety
Each Meissner housing is individually
inspected, tested and serialized to
ensure the highest quality and safety.
Outlet
Ordering Information
HS2D
Element
Length
Vent/Drain
Option
2P
—
2P = 2.5" (6 cm)
5P = 5" (13 cm)
- = StandardVent & Drain
0 = No Vent/Drain
3 = 1/2" SF
Vent & Drain
—
Replacement Parts & Accessories
Closure O-ring - Silicone
Closure O-ring - Buna
Closure O-ring - EPR
Closure O-ring - Teflon® envelope
Closure O-ring - Viton®
Valve Stem
Viton and Teflon are registered trademarks of E. I. du Pont de Nemours & Co.
© 2007, 2000 Meissner Filtration Products, Inc.
Part Number
420S-335
420B-335
420E-335
420X-335
420V-335
11300-20
(continued)
Closure
O-ring
0SH4
S
S
B
E
V
X
= Silicone
= Buna
= EPR
= Viton®
= Teflon®
envelope
Part Number
Valve Seal Kits: 2 O-rings + 2 Teflon® valve seal tips
Buna O-ring
1133B-00
EPR O-ring
1133E-00
Silicone O-ring
1133S-00
Teflon® O-ring
1133T-00
®
Viton O-ring
1133V-00
4181 Calle Tesoro • Camarillo, CA 93012
(800) 391-9458 • Fax (805) 388-5948
International: +1-805-388-9911
www.meissner.com
SP018-3.3
Download