Table of Contents
Section 14
Transformers
,
General Purpose Transformer, see page 14-2
Overview
14-2
EE Three-Phase Transformers
14-4
EE Single-Phase Transformers
14-5
EE Single- and Three-Phase, Watchdog™ Low Temperature Rise
Transformers
14-5
EE NL and NLP Series Transformers
14-6
NEMA Premium Transformers
14-7
Sealed Single- and Three-Phase Transformers
14-8
Sealed Single-Phase, Export Model Transformers
14-8
Sealed Single-Phase, Buck and Boost Transformers
14-8
Sealed Single- and Three-Phase, Stainless Steel Enclosed
Transformers
14-9
Non-Ventilated Single- and Three-Phase Transformers
14-9
Transformer Enclosures
14-9
Miscellaneous
Sealed Transformer,
see page 14-8
Industrial Control Transformer,
see page 14-14
Enclosures and Accessories
14-10
Lug and Terminal Block Cover Kits; Weathershields; Wall and
Ceiling Mounting Brackets
14-11
Unit Substation, 600 Volts and Below
Sealed, Mini Power-Zone™ Unit Substations
14-12
14
Industrial Control
Type T and Type TF Transformers
14-14
MultiTap™ Transformers
14-15
Accessories
14-17
Transformer Disconnects
NEMA Type 1 and Type 12 Enclosures
14-18
Instrument, 600 Volt Class
Voltage and Current Transformers
14-19
Energy Efficient, Dry Type, 2.4, 5, and 15 kV
Mini Power-Zone™
Unit Substation,
see page 14-12
© 2011 Schneider Electric
All Rights Reserved
Transformer Disconnect,
see page 14-18
TRANSFORMERS
General Purpose, Dry Type, 600 Volts and Below
1201–15,000 V, Three-Phase, Indoor Transformers
14-20
1201–15,000 V, Single-Phase, Indoor Transformers
14-20
14-1
General Purpose Dry
Type 600 Volts and Below
Overview
Class 7400 / Refer to Catalog 7400CT0601
www.schneider-electric.us
Public Law 109-58 of the Energy Policy Act of 2005
requires the manufacturing of energy efficient
transformers after January 1, 2007 for all low-voltage
distribution transformers.
According to Department of Energy Federal Registry Final
Rule 10 CFR Part 429, 430, and 431, Low-Voltage
Dry-Type Distribution Transformers, the efficiency of a
low-voltage, dry-type, distribution transformer
manufactured on or after January 1, 2007, shall be no less
than that required for its kVA rating in the table below.
The following products are not included in the definition of
Low Voltage, Dry-Type Distribution Transformers and are
not required to comply with the efficiency table.
Sealed, General Purpose, Three-Phase (3–30 kVA) and
Single-Phase (.050–25 kVA)
Table 14.1:
Non-Ventilated, Three-Phase (15–500 kVA) and
Single-Phase (15–250 kVA)
Required Efficiency Ratings of
Low-Voltage Distribution Transformers
Single-Phase
14
kVA
15
25
37.5
50
75
100
167
250
333
TRANSFORMERS
a
Efficiency (%) a
97.7
98
98.2
98.3
98.5
98.6
98.7
98.8
98.9
Three-Phase
kVA
15
30
45
75
112.5
150
225
300
500
750
1000
Efficiency (%) a
97
97.5
97.7
98
98.2
98.3
98.5
98.6
98.7
98.8
98.9
Efficiencies are determined at the following reference conditions:
(1) for no-load losses, at the temperature of 20 °C;
(2) for load-losses, at the temperature of 75 °C and 35 percent of
nameplate load.
(Source: Table 4–2 of National Electrical Manufacturers Association
(NEMA) Standard TP–1–2002, Guide for Determining Energy
Efficiency for Distribution Transformers.)
The following family of products meets these requirements.
General Purpose, Three-Phase (15–2000 kVA) and
Single-Phase (15–333 kVA)
General Purpose transformers provide the most
economical solution.
• Aluminum or copper windings
• Isolation transformer
• 150 °C rise design on 220 °C insulation systems.
Watchdog, Three-Phase (15–1500 kVA) and
Single-Phase (15–333 kVA)
Watchdog transformers, by design, reduce energy
consumption at loads greater than 50% loading, giving
fewer BTUs/hour at those loading levels. The life
expectancy is greater than that of 150 °C rise General
Purpose units.
• Aluminum or copper windings
• Isolation transformer
• Two temperature rise options:
— 115 °C rise on 220 °C insulation systems
(15% continuous emergency overload
capacity)
— 80 °C rise on 220 °C insulation systems (30%
continuous emergency overload capacity)
K-Rated, Three-Phase (15–1000 kVA)
Core and coils encapsulated in a sand and resin mixture
allows for a more compact design.
• Copper windings
• Isolation transformer
Non-Ventilated transformers are designed to operate in
harsh environmental conditions: dust, airborne
contaminants, metal particles, or where weather
conditions make ventilated openings impractical.
Drive Isolation Transformers
Square D™ brand drive isolation transformers from
Schneider Electric meet the special requirements for both
adjustable frequency drives and dc motor drive power
isolation. They cover the allowance for high surges,
harmonics, and offset currents.
Drive isolation transformers are not shielded isolation
transformers, but act to lessen transient generation into
the supply power and act as a buffer for SCR current
surges.
Available Voltages:
• Primary: 230 Delta, 460 Delta, 575 Delta
• Secondary: 230Y/133, 460Y/265, 5575Y/332
Available kVA:
• 7.5, 11, 15, 20, 27, 34, 40, 51, 63, 75, 93,118, 145,
175, 220, 275, 330, 440, 550 kVA
For part numbers, see Section 6 of the Supplemental
Digest or see the Schneider Electric Product Configurator.
Motor Starting Auto Transformers
Auto transformers’ design matches starter requirements.
• Open core and coil available
• Two-winding and three-winding
• Available in the following voltages:
— 208, 240, 480, or 600 V
• Available in the following horsepower:
— 10, 20, 30, 50, 75, 100, 125, 150, 200, 250,
300, 400 hp
For part numbers, see Section 6 of the Supplemental
Digest or see the Schneider Electric Product Configurator.
IP00 Core and Coil Transformers
All Type 2 distribution devices are available as IP00 Core
and Coil. These units are compliant with the 2005 Energy
Act, as well as the excluded items.
For part numbers, see Section 6 of the Supplemental
Digest or see the Schneider Electric Product Configurator.
K-rated transformers mitigate Triplen harmonics via a
Delta-Wye configuration.
• Aluminum or copper windings
• Isolation transformer with electrostatic shield
• K-4 and K-13 levels
Harmonic Mitigating, Three-Phase (15–1000 kVA)
Harmonic Mitigating transformers mitigate Triplen
harmonics via electromagnetic phase relations. They
remove 5th and 7th harmonics when using dual devices
with a 0° and a +30° phase shift. They further reduce 11th
and 13th harmonics when a +15° or -15° shift is added to
the dual devices. Available with:
• Aluminum or copper windings
• Isolation transformer
14-2
© 2011 Schneider Electric
All Rights Reserved
General Purpose Dry
Type 600 Volts and Below
Overview
Class 7400 / Refer to Catalog 7400CT1001
www.schneider-electric.us
NEMA Premium
NEMA Premium is the only third-party standard that
defines a complete range of efficiency levels that exceeds
2005 Energy Act requirements.
As a partner in the NEMA Premium Transformer Program,
Schneider Electric has determined that this product meets
the NEMA Premium efficiency specifications for premium
energy efficiency.
Features of Distribution and NEMA Premium
Transformers
•
•
•
NOTE: NEMA Premium is a trademark of the National Electrical Manufacturers
Association.
Efficiency Ratings of NEMA Premium
Transformers
Single phase
kVA
15
25
37.5
50
75
100
167
250
333
Efficiency (%)
98.39
98.60
98.74
98.81
98.95
99.02
99.09
99.16
99.23
Three phase
kVA
15
30
45
75
112.5
150
225
300
500
750
1000
Efficiency (%)
97.90
98.25
98.39
98.60
98.74
98.81
98.95
99.02
99.09
99.16
99.23
•
TRANSFORMERS
Table 14.2:
Provide an adequate wire bending radius for multiple
cable options, per NEC 312.6(A) (called out in NEC
450.12 Terminal Wire Space)
200% cable landing on all X0 or H0 terminals
Required ventilation clearance marked on all units in
accordance with NEC Section 450.9.
— All ventilated transformers from
Schneider Electric require only a three-inch
clearance—50% smaller than the industry
average
Terminals are sized for overcurrent and wire size, not
for nameplate current rating
— Primary terminals are sized to accept lugs up
to 250% of nameplate current rating
— Secondary terminals are sized to accept lugs
up to 125% of nameplate current rating
Schneider Electric Premium 30 Transformers Family
•
•
•
K-rated, Three-Phase (15–1000 kVA). Available with:
— Copper windings
— K-9 and K-13 levels
Harmonic Mitigating, Three-Phase (15–1000 kVA)
Watchdog, Three-Phase (15–1000 kVA) and
Single-Phase (15–333 kVA)
14
Square D™ brand transformers from Schneider Electric
feature the largest terminals in the industry.
Sound Levels
Square D™ brand transformers meet the NEMA standards
for sound level shown in Table 14.3.
Table 14.3:
NEMA Standards for Sound Levels
kVA Rating
0–9
10–50
51–150
151–300
301–500
501–700
701–1000
Sound Level
40 dB
45 dB
50 dB
55 dB
60 dB
62 dB
64 dB
For an additional charge, any Square D™ brand
transformer can be built with a sound level that is
3 or 6 dB below the NEMA standard.
For part numbers, see Section 6 of the Supplemental
Digest or see the Schneider Electric Product Configurator.
© 2011 Schneider Electric
All Rights Reserved
14-3
General Purpose Dry
Type 600 Volts and Below
Energy Efficient Three-Phase
Class 7400 / Refer to Catalog 7400CT0601
www.schneider-electric.us
$ Price
Degree
Full Capacity
C
Weight
Taps
Temp. (lbs) a
Rise
14
TRANSFORMERS
480 V Delta Primary, Aluminum Windings
15
EE15T3H
3941.00 6–2.5%2+4–
30
EE30T3H
5181.00 6–2.5%2+4–
45
EE45T3H
6234.00 6–2.5%2+4–
75
EE75T3H
9393.00 6–2.5%2+4–
112.5
EE112T3H
12513.00 6–2.5%2+4–
150
EE150T3H
16334.00 6–2.5%2+4–
225
EE225T3H
21776.00 6–2.5%2+4–
300
EE300T3H
27924.00 6–2.5%2+4–
500
EE500T68H
39052.00 4–2.5%2+2–
750
EE750T68H
75516.00 4–2.5%2+2–
1000
EE1000T77H
121263.00
2–5%1+1–
150
150
150
150
150
150
150
150
150
150
150
220
260
368
585
620
835
1110
1350
1875
2965
5200
17D
17D
18D
20D
21D
22D
24D
25D
30D
31D
c
600 V Delta Primary, Aluminum Windings
15
EE15T65H
5011.00 6–2.5%2+4–
30
EE30T65H
6586.00 6–2.5%2+4–
45
EE45T65H
7925.00 6–2.5%2+4–
75
EE75T65H
11941.00 6–2.5%2+4–
112.5
EE112T65H
15907.00 6–2.5%2+4–
150
EE150T65H
20765.00 6–2.5%2+4–
225
EE225T65H
27683.00 6–2.5%2+4–
300
EE300T65H
35498.00 6–2.5%2+4–
500
EE500T79H
49645.00 4–2.5%2+2–
750
EE750T79H
96000.00 4–2.5%2+2–
1000
EE1000T79H
154157.00 4–2.5%2+2–
150
150
150
150
150
150
150
150
150
150
150
240
290
372
585
712
790
945
1305
1870
2990
5800
17D
17D
18D
20D
21D
22D
24D
25D
30D
31D
c
208 V Delta Primary, Aluminum Windings
15
EE15T211H
5011.00
3–5%1+2–
30
EE30T211H
6586.00
3–5%1+2–
45
EE45T211H
7925.00
3–5%1+2–
75
EE75T211H
11941.00
3–5%1+2–
112.5
EE112T211H
15907.00
3–5%1+2–
150
EE150T211H
20765.00
3–5%1+2–
225
EE225T211H
27683.00
3–5%1+2–
300
EE300T211H
35498.00
3–5%1+2–
500
EE500T211H
49645.00
3–5%1+2–
150
150
150
150
150
150
150
150
150
210
210
374
575
604
795
1000
1425
1870
17D
17D
18D
20D
21D
22D
24D
25D
30D
240 V Delta Primary, Aluminum Windings
15
EE15T67H
5011.00 6–2.5%2+4–
30
EE30T67H
6586.00 6–2.5%2+4–
45
EE45T67H
7925.00 6–2.5%2+4–
75
EE75T67H
11941.00 6–2.5%2+4–
112.5
EE112T67H
15907.00 6–2.5%2+4–
150
EE150T67H
20765.00 6–2.5%2+4–
225
EE225T67H
27683.00 6–2.5%2+4–
300
EE300T239H
35498.00
3–5%1+2–
500
EE500T239H
49645.00
3–5%1+2–
150
150
150
150
150
150
150
150
150
240
260
379
590
620
805
972
1360
1900
17D
17D
18D
20D
21D
22D
24D
25D
25D
480 V Delta Primary, Copper Windings
15
EE15T3HCU
6306.00 6–2.5%2 + 4–
30
EE30T3HCU
8290.00 6–2.5%2 + 4–
45
EE45T3HCU
9974.00 6–2.5%2 + 4–
75
EE75T3HCU
15029.00 6–2.5%2 + 4–
112.5 EE112T3HCU
20021.00 6–2.5%2 + 4–
150
EE150T3HCU
26134.00 6–2.5%2 + 4–
225
EE225T3HCU
34842.00 6–2.5%2 + 4–
300
EE300T3HCU
44679.00 6–2.5%2 + 4–
500 EE500T68HCU
62483.00 4–2.5%2 + 2–
750 EE750T68HCU
120826.00 4–2.5%2 + 2–
150
150
150
150
150
150
150
150
150
150
310
340
418
642
725
915
1125
1535
2350
3485
17D
17D
18D
20D
21D
22D
24D
25D
30D
31D
kVA
EE Three-Phase Transformers; 60 Hz;
480Y/277 Secondary; cULus Listed
Catalog
No.
$ Price
Enclosure ab
Catalog
No.
Table 14.5:
C Weight
Full Capacity Deg.
Temp. (lbs)
Taps
a
Rise
208 V Delta Primary, Aluminum Windings
15
EE15T212H
5011.00 3–5%1+2–
30
EE30T212H
6586.00 3–5%1+2–
45
EE45T212H
7925.00 3–5%1+2–
75
EE75T212H
11941.00 3–5%1+2–
112.5
EE112T212H
15907.00 3–5%1+2–
150
EE150T212H
20765.00 3–5%1+2–
225
EE225T212H
27683.00 3–5%1+2–
300
EE300T212H
35498.00 3–5%1+2–
500
EE500T212H
49645.00 3–5%1+2–
150
150
150
150
150
150
150
150
150
230
260
375
550
615
800
991
1425
1919
17D
17D
18D
20D
21D
22D
24D
25D
30D
480 V Delta Primary, Aluminum Windings
15
EE15T1814H
5011.00 6–2.5%2+4–
30
EE30T1814H
6586.00 6–2.5%2+4–
45
EE45T1814H
7925.00 6–2.5%2+4–
75
EE75T1814H
11941.00 6–2.5%2+4–
112.5 EE112T1814H
15907.00 6–2.5%2+4–
150
EE150T1814H
20765.00 6–2.5%2+4–
225
EE225T1814H
27683.00 6–2.5%2+4–
300
EE300T1814H
35498.00 6–2.5%2+4–
500
EE500T76H
49645.00 4–2.5%2+2–
150
150
150
150
150
150
150
150
150
215
260
385
660
615
820
998
1500
2040
17D
17D
18D
20D
21D
22D
24D
25D
30D
Table 14.6:
kVA
EE Three-Phase Transformers; 60 Hz;
240 Delta Secondary; cULus Listed
Catalog
No.
$ Price
C Weight
Full Capacity Deg.
Temp. (lbs)
Taps
a
Rise
480 V Delta Primary, Aluminum Windings
15
EE15T6H
5011.00 6–2.5%2+4–
30
EE30T6H
6586.00 6–2.5%2+4–
45
EE45T6H
7925.00 6–2.5%2+4–
75
EE75T6H
11941.00 6–2.5%2+4–
112.5
EE112T6H
15907.00 6–2.5%2+4–
150
EE150T6H
20765.00 6–2.5%2+4–
225
EE225T6H
27683.00 6–2.5%2+4–
300
EE300T6H
35498.00 6–2.5%2+4–
500
EE500T63H
49645.00 4–2.5%2+2–
750
EE750T63H
96000.00 4–2.5%2+2–
1000
EE1000T78H
154157.00 2–5%1+1–
150
150
150
150
150
150
150
150
150
150
150
220
260
368
585
620
835
1110
1350
1875
2965
5200
Enclosure ab
kVA
EE Three-Phase Transformers; 60 Hz;
208Y/120 Secondary; cULus Listed
Enclosure ab
Table 14.4:
17D
17D
18D
20D
21D
22D
24D
25D
30D
31D
c
480 V Primary with 120 Center Tap, Aluminum Windings
240 Delta with 120 center taps have historically been limited to 5% capacity on the
center tap. The units from Schneider Electric offer greater limits on 120 V center
tap. Limits are determined by the total transformer loading and the following
formula used to size new 120 V center tap units:
(240 V balanced loads) + 2.5 x (120 V loads) = kVA required
15
EE15T151HCT
5117.00
2–5%–
150
220
17D
30
EE30T151HCT
6726.00
2–5%–
150
295
17D
45
EE45T151HCT
8093.00
2–5%–
150
385
18D
75
EE75T151HCT
12193.00
2–5%–
150
590
19D
112.5 EE112T151HCT
16243.00
2–5%–
150
635
21D
150
EE150T151HCT
21202.00
2–5%–
150
783
22D
225
EE225T151HCT
28266.00
2–5%–
150
1080 24D
300
EE300T151HCT
36247.00
2–5%–
150
1355 25D
500
EE500T151HCT
50691.00
2–5%–
150
2137 30D
750
EE750T151HCT
98020.00
2–5%–
150
2982 31D
1000 EE1000T151HCT 149905.00
2–5%–
150
5800
c
a
b
c
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
Contact factory.
NOTE: FCBN = full capacity below normal
Lugs are furnished by customer
Refer to www.squared.com/eexfmr for additional information.
Other Primary and Secondary combinations are available via the
Schneider Electric Product Configurator. Contact your local
Schneider Electric representative for more information.
14-4
PE2E
Discount
Schedule
© 2011 Schneider Electric
All Rights Reserved
Energy Efficient Single-Phase; Watchdog™
Class 7400 / Refer to Catalog 7400CT0601
kVA
Catalog
No.
EE Single-Phase Transformers
$ Price
C
Full Capacity Degree
Temp. Weight
Taps
(lbs) a
Rise
Enclosure ab
Table 14.7:
Single-Phase—240 X 480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed through 167 kVA
15
EE15S3H
3072.00 6–2.5%2+4–c
150
215
25
EE25S3H
4151.00 6–2.5%2+4–c
150
275
37.5
EE37S3H
5534.00 6–2.5%2+4–c
150
340
50
EE50S3H
6731.00 6–2.5%2+4–c
150
395
75
EE75S3H
9128.00 6–2.5%2+4–c
150
619
100
EE100S3H
15091.00 6–2.5%2+4–c
150
682
167
EE167S3H
17333.00 6–2.5%2+4–c
150
982
250
EE250S3H
35837.00 6–2.5%2+4–c
150
1060
333
EE333S3H
44586.00 6–2.5%2+4–c
150
1854
17D
17H
18H
18H
21D
22D
24D
25D
31D
Single-Phase—600 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed through 167 kVA
15
EE15S3534H
3733.00 6–2.5%2+4–c
150
215
25
EE25S3534H
5044.00 6–2.5%2+4–c
150
275
37.5 EE37S3534H
6723.00 6–2.5%2+4–c
150
400
50
EE50S3534H
8177.00 6–2.5%2+4–c
150
450
75
EE75S3534H 11089.00 6–2.5%2+4–c
150
605
100 EE100S3534H 18332.00 6–2.5%2+4–c
150
795
167 EE167S3534H 21056.00 6–2.5%2+4–c
150
985
250 EE250S3534H 43535.00 6–2.5%2+4–c
150
1065
333 EE333S3534H 50383.00 6–2.5%2+4–c
150
1865
17D
17H
18H
18H
21D
22D
24D
25D
31D
Single-Phase—208 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed through 167 kVA
15
EE15S60H
4506.00
2-5%FCBN
150
25
EE25S60H
5866.00
2-5%FCBN
150
37.5
EE37S60H
7818.00
2-5%FCBN
150
50
EE50S60H
9508.00
2-5%FCBN
150
75
EE75S60H
12890.00
2-5%FCBN
150
100
EE100S60H 19613.00
2-5%FCBN
150
167
EE167S60H 24484.00
2-5%FCBN
150
200
275
397
420
621
795
985
17D
17H
18H
18H
21D
22D
24D
Single-Phase—277 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed through 167 kVA
15
EE15S61H
4506.00
2-5%FCBN
150
25
EE25S61H
5866.00
2-5%FCBN
150
37.5
EE37S61H
7818.00
2-5%FCBN
150
50
EE50S61H
9508.00
2-5%FCBN
150
75
EE75S61H
12890.00
2-5%FCBN
150
100
EE100S61H 19613.00
2-5%FCBN
150
167
EE167S61H 24484.00
2-5%FCBN
150
225
285
410
460
630
695
995
17D
17H
18H
18H
21D
22D
24D
EE Three- and Single-Phase Watchdog Low
Temperature Rise Transformers
Designed to maximize energy efficiency, supplies highest
efficient levels for 24 hour loading greater than 50%. Extra
long life expectancy using 220 °C insulation system
designed for full load operation at a maximum temperature
rise of 115 °C or 80 °C instead of 150 °C. Continuous
emergency overload capability of 15% on 115 °C rise and
30% on 80 °C rise.
Table 14.8:
kVA
EE Watchdog Transformers
Catalog
No.
$ Price
Full Capacity
Taps
Weight Enclosure
(lbs) a
ab
115 °C Rise Three-Phase—480 V Delta Primary; 208Y/120 V Secondary;
60 Hz; cULus Listed
15
EE15T3HF
4861.00
6–2.5%2 + 4–
220
17D
30
EE30T3HF
7292.00
6–2.5%2 + 4–
368
18D
45
EE45T3HF
8777.00
6–2.5%2 + 4–
585
20D
75
EE75T3HF
13222.00
6–2.5%2 + 4–
620
21D
112.5
EE112T3HF
17614.00
6–2.5%2 + 4–
835
22D
150
EE150T3HF
22993.00
6–2.5%2 + 4–
980
24D
225
EE225T3HF
30652.00
6–2.5%2 + 4–
1349
25D
300
EE300T68HF
39094.00
6–2.5%2 + 4–
2050
30D
500
EE500T68HF
54673.00
6–2.5%2 + 2–
2330
30D
115 °C Rise Three-Phase—480 V Delta Primary; 208Y/120 V Secondary;
60 Hz; cULus Listed. Copper Windings
15
EE15T3HFCU
7778.00
6–2.5%2 + 4–
260
17D
30
EE30T3HFCU
11667.00
6–2.5%2 + 4–
420
18D
45
EE45T3HFCU
14043.00
6–2.5%2 + 4–
642
20D
75
EE75T3HFCU
21155.00
6–2.5%2 + 4–
675
20D
112.5 EE112T3HFCU
28182.00
6–2.5%2 + 4–
741
21D
150
EE150T3HFCU
36789.00
6–2.5%2 + 4–
1050
22D
225
EE225T3HFCU
49043.00
6–2.5%2 + 4–
1220
24D
300 EE300T68HFCU 62551.00
6–2.5%2 + 4–
2300
30D
500 EE500T68HFCU 87477.00
6–2.5%2 + 2–
2409
30D
80 °C Rise Three-Phase—480 V Delta Primary; 208Y/120 V Secondary;
60 Hz; cULus Listed
15
EE15T3HB
5304.00
6–2.5%2 + 4–
220
17D
30
EE30T3HB
7956.00
6–2.5%2 + 4–
368
18D
45
EE45T3HB
9574.00
6–2.5%2 + 4–
585
20D
75
EE75T3HB
14424.00
6–2.5%2 + 4–
620
21D
112.5
EE112T3HB
19215.00
6–2.5%2 + 4–
835
22D
150
EE150T3HB
24641.00
6–2.5%2 + 4–
980
24D
225
EE225T3HB
33438.00
6–2.5%2 + 4–
1349
25D
300
EE300T68HB
43282.00
6–2.5%2 + 4–
2400
30D
500
EE500T68HB
60531.00
6–2.5%2 + 2–
2964
31D
80 °C Rise Three-Phase—480 V Delta Primary; 208Y/120 V Secondary;
60 Hz; cULus Listed. Copper Windings
15
EE15T3HBCU
8486.00
6–2.5%2 + 4–
260
17D
30
EE30T3HBCU
12730.00
6–2.5%2 + 4–
418
18D
45
EE45T3HBCU
15318.00
6–2.5%2 + 4–
642
20D
75
EE75T3HBCU
23078.00
6–2.5%2 + 4–
725
21D
112.5 EE112T3HBCU 30744.00
6–2.5%2 + 4–
910
21D
150
EE150T3HBCU 39426.00
6–2.5%2 + 4–
1125
24D
225
EE225T3HBCU 53501.00
6–2.5%2 + 4–
1425
24D
300 EE300T68HBCU 69251.00
6–2.5%2 + 4–
2400
30D
500 EE500T68HBCU 96850.00
6–2.5%2 + 2–
2578
30D
115 °C Rise Single-Phase—240x480 V Primary; 120/240 V Secondary; 60
Hz; cULus Listed
15
EE15S3HF
4453.00 6–2.5%2 + 4–c
275
17H
25
EE25S3HF
5797.00 6–2.5%2 + 4–c
340
18H
37.5
EE37S3HF
7726.00 6–2.5%2 + 4–c
395
18H
50
EE50S3HF
9396.00 6–2.5%2 + 4–c
620
21D
75
EE75S3HF
12738.00 6–2.5%2 + 4–c
685
22D
100
EE100S3HF
19381.00 6–2.5%2 + 4–c
985
24D
80 °C Rise Single-Phase—240x480 V Primary; 120/240 V Secondary;
60 Hz; cULus Listed
15
EE15S3HB
4918.00 6–2.5%2 + 4–c
280
17H
25
EE25S3HB
6403.00 6–2.5%2 + 4–c
345
18H
37.5
EE37S3HB
8533.00 6–2.5%2 + 4–c
400
18H
50
EE50S3HB
10378.00 6–2.5%2 + 4–c
625
21D
75
EE75S3HB
14069.00 6–2.5%2 + 4–c
690
22D
100
EE100S3HB
21406.00 6–2.5%2 + 4–c
995
24D
a
b
c
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
When 240 V tap is used, there will be 3–5% taps: 1 above and 2 below.
NOTE: FCBN = full capacity below normal
Lugs are furnished by customer
Refer to www.squared.com/eexfmr for additional information.
© 2011 Schneider Electric
All Rights Reserved
PE2E
Discount
Schedule
14-5
TRANSFORMERS
www.schneider-electric.us
14
General Purpose Dry
Type 600 Volts and Below
General Purpose Dry
Type 600 Volts and Below
Transformers for Non-Linear Loads
Class 7400 / Refer to Catalogs 7400CT0601, 7400CT0301
EE NL and NLP Series Transformers
• Three-phase dry type transformers,
•
Table 14.9:
kVA
480 Delta Primary, 208Y/120 Primary
Catalog
No.
$ Price
Taps
Weight
(lbs)
a
14
TRANSFORMERS
NL Series for Typical Non-Linear Load Service; K-4 Rated;
Aluminum Windings; 115 °C Rise
15
EE15T3HFISNL
5834.00 6–2.5% 2+4–
256
30
EE30T3HFISNL
8751.00 6–2.5% 2+4–
320
45
EE45T3HFISNL
10533.00 6–2.5% 2+4–
515
75
EE75T3HFISNL
15866.00 6–2.5% 2+4–
535
112.5
EE112T3HFISNL
21137.00 6–2.5% 2+4–
800
150
EE150T3HFISNL
27592.00 6–2.5% 2+4–
1110
225
EE225T3HFISNL
38389.00 6–2.5% 2+4–
1349
300
EE300T68HFISNL
53179.00 4–2.5% 2+2–
1750
500
EE500T68HFISNL
73483.00 4–2.5% 2+2–
2295
17D
18D
20D
21D
22D
24D
25D
30D
31D
NL Series for Typical Non-Linear Load Service; K-4 Rated;
Copper Windings; 115 °C Rise
15
EE15T3HFISCUNL
9334.00 6–2.5% 2+4–
260
30
EE30T3HFISCUNL
14002.00 6–2.5% 2+4–
395
45
EE45T3HFISCUNL
16853.00 6–2.5% 2+4–
730
75
EE75T3HFISCUNL
25386.00 6–2.5% 2+4–
640
112.5 EE112T3HFISCUNL
33819.00 6–2.5% 2+4–
935
150
EE150T3HFISCUNL
44147.00 6–2.5% 2+4–
1300
225
EE225T3HFISCUNL
61422.00 6–2.5% 2+4–
1450
300
EE300T68HFISCUNL 85086.00 4–2.5% 2+2–
2450
17D
18D
20D
20D
22D
24D
25D
25D
NLP Series for More Severe Non-Linear Load Service; K-13 Rated;
Aluminum Windings; 115 °C Rise
15
EE15T3HFISNLP
6636.00 6–2.5% 2+4–
256
17D
30
EE30T3HFISNLP
9954.00 6–2.5% 2+4–
375
18D
45
EE45T3HFISNLP
11981.00 6–2.5% 2+4–
500
20D
75
EE75T3HFISNLP
18048.00 6–2.5% 2+4–
560
21D
112.5
EE112T3HFISNLP
24043.00 6–2.5% 2+4–
800
22D
150
EE150T3HFISNLP
31386.00 6–2.5% 2+4–
1110 24D
225
EE225T3HFISNLP
42764.00 6–2.5% 2+4–
1335 25D
300
EE300T68HFISNLP
56966.00 4–2.5% 2+2–
2350 30D
500
EE500T68HFISNLP
79157.00 4–2.5% 2+2–
3200 31D
NLP Series for More Severe Non-Linear Load Service; K-13 Rated;
Copper Windings; 115 °C Rise
15
EE15T3HFISCUNLP
10618.00 6–2.5% 2+4–
260
17D
30
EE30T3HFISCUNLP
15926.00 6–2.5% 2+4–
430
18D
45
EE45T3HFISCUNLP
19170.00 6–2.5% 2+4–
730
20D
75
EE75T3HFISCUNLP
28877.00 6–2.5% 2+4–
640
20D
112.5 EE112T3HFISCUNLP 38469.00 6–2.5% 2+4–
985
22D
150 EE150T3HFISCUNLP 50218.00 6–2.5% 2+4–
1135 24D
225 EE225T3HFISCUNLP 68422.00 6–2.5% 2+4–
1477 25D
300 EE300T68HFISCUNLP 91146.00 4–2.5% 2+2–
2650 30D
14-6
PE2E
Discount
Schedule
www.schneider-electric.us
Harmonic Mitigating, 480 Primary to
208zz/120 Secondary—UL Listed
Weight
(lbs)
a
Enclosure ab
•
480 Delta to 208Y/120
Aluminum or copper windings
Electrostatic shield
Class 220 insulation
Double size neutral terminal for additional customer
neutral cables
Additional coil capacity to compensate for higher
non-linear load loss
cULus Listed
Enclosure ab
•
•
•
•
Table 14.10:
0° Phase Shift; Copper Windings; 130 °C Rise
15
HM15T208NCU
12670.00
6–2.5% 2+4–
30
HM30T208NCU
19416.00
6–2.5% 2+4–
45
HM45T208NCU
23364.00
6–2.5% 2+4–
75
HM75T208NCU
35204.00
6–2.5% 2+4–
112.5
HM112T208NCU
46900.00
6–2.5% 2+4–
150
HM150T208NCU
61226.00
6–2.5% 2+4–
225
HM225T208NCU
81616.00
6–2.5% 2+4–
300
HM300T208NCU
104664.00
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
30° Phase Shift; Copper Windings; 130 °C Rise
15
HM15T255NCU
12670.00
3-5%1+230
HM30T255NCU
19416.00
3-5%1+245
HM45T255NCU
23364.00
3-5%1+275
HM75T255NCU
35204.00
3-5%1+2112.5
HM112T255NCU
46900.00
3-5%1+2150
HM150T255NCU
61226.00
3-5%1+2225
HM225T255NCU
81616.00
3-5%1+2300
HM300T255NCU
104664.00
3-5%1+2-
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
+15° Phase Shift; Copper Windings; 130 °C Rise
15
HM15T251NCU
12670.00
6–2.5% 2+4–
30
HM30T251NCU
19416.00
6–2.5% 2+4–
45
HM45T251NCU
23364.00
6–2.5% 2+4–
75
HM75T251NCU
35204.00
6–2.5% 2+4–
112.5
HM112T251NCU
46900.00
6–2.5% 2+4–
150
HM150T251NCU
61226.00
6–2.5% 2+4–
225
HM225T251NCU
81616.00
6–2.5% 2+4–
300
HM300T251NCU
104664.00
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
15° Phase Shift; Copper Windings; 130 °C Rise
15
HM15T259NCU
12670.00
6–2.5% 2+4–
30
HM30T259NCU
19416.00
6–2.5% 2+4–
45
HM45T259NCU
23364.00
6–2.5% 2+4–
75
HM75T259NCU
35204.00
6–2.5% 2+4–
112.5
HM112T259NCU
46900.00
6–2.5% 2+4–
150
HM150T259NCU
61226.00
6–2.5% 2+4–
225
HM225T259NCU
81616.00
6–2.5% 2+4–
300
HM300T259NCU
104664.00
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
kVA
a
b
Catalog
No.
$ Price
Taps
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
Additional temperature rises are available; for part
numbers, see Section 6 of the Supplemental Digest or see
the Schneider Electric Product Configurator.
© 2011 Schneider Electric
All Rights Reserved
General Purpose Dry
Type 600 Volts and Below
NEMA Premium
Class 7400 / Refer to Catalog 7400CT1001
$ Price
Taps
Weight
(lbs)
a
NP Series for Typical Non-Linear Load Service— K-9 Rated—Copper
Windings; 130 °C Rise
15
EP15T3HNISCUNP
16395.00
6–2.5% 2+4–
310
17D
30
EP30T3HNISCUNP
24925.00
6–2.5% 2+4–
340
18D
45
EP45T3HNISCUNP
28425.00
6–2.5% 2+4–
418
20D
75
EP75T3HNISCUNP
44590.00
6–2.5% 2+4–
642
21D
112.5 EP112T3HNISCUNP
57863.00
6–2.5% 2+4–
725
22D
150 EP150T3HNISCUNP
74683.00
6–2.5% 2+4–
915
24D
225 EP225T3HNISCUNP 104646.00
6–2.5% 2+4–
1125
25D
300 EP300T3HNISCUNP 136718.00
4–2.5% 2+2–
1535
30D
NP Series for Typical Non-Linear Load Service— K-9Rated—Copper
Windings; 115 °C Rise
15
EP15T3HFISCUNP
21313.00
6–2.5% 2+4–
310
17D
30
EP30T3HFISCUNP
32402.00
6–2.5% 2+4–
340
18D
45
EP45T3HFISCUNP
36952.00
6–2.5% 2+4–
418
20D
75
EP75T3HFISCUNP
57967.00
6–2.5% 2+4–
642
20D
112.5 EP112T3HFISCUNP
75222.00
6–2.5% 2+4–
725
22D
150 EP150T3HFISCUNP
97088.00
6–2.5% 2+4–
915
24D
225 EP225T3HFISCUNP 136040.00
6–2.5% 2+4–
1125
25D
300 EP300T3HFISCUNP 177733.00
4–2.5% 2+2–
1535
25D
NLP Series for More Severe Non-Linear Load Service—K-13 Rated—
Copper Windings; 150 °C Rise
15
EP15T3HISCUNLP
17451.00
6–2.5% 2+4–
260
17D
30
EP30T3HISCUNLP
26527.00
6–2.5% 2+4–
430
18D
45
EP45T3HISCUNLP
30253.00
6–2.5% 2+4–
730
20D
75
EP75T3HISCUNLP
47459.00
6–2.5% 2+4–
640
20D
112.5 EP112T3HISCUNLP
61585.00
6–2.5% 2+4–
985
22D
150 EP150T3HISCUNLP
79488.00
6–2.5% 2+4–
1135
24D
225 EP225T3HISCUNLP 110288.00
6–2.5% 2+4–
1477
25D
300 EP300T68HISCUNLP 141419.00
4–2.5% 2+2–
2650
30D
Harmonic Mitigating, 480 Primary to
208zz/120 Secondary; Copper Windings
Taps
Weight
(lbs)
a
0° Phase Shift
15
HM15T208HNCUEP
20822.00
30
HM30T208HNCUEP
32341.00
45
HM45T208HNCUEP
36872.00
75
HM75T208HNCUEP
57857.00
112.5 HM112T208HNCUEP
75082.00
150 HM150T208HNCUEP
96912.00
225 HM225T208HNCUEP 131554.00
300 HM300T208HNCUEP 162393.00
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
30° Phase Shift
15
HM15T255HNCUEP
20822.00
30
HM30T255HNCUEP
32341.00
45
HM45T255HNCUEP
36872.00
75
HM75T255HNCUEP
57857.00
112.5 HM112T255HNCUEP
75082.00
150 HM150T255HNCUEP
96912.00
225 HM225T255HNCUEP 131554.00
300 HM300T255HNCUEP 162393.00
3-5%1+23-5%1+23-5%1+23-5%1+23-5%1+23-5%1+23-5%1+23-5%1+2-
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
+15° Phase Shift
15
HM15T251HNCUEP
20822.00
30
HM30T251HNCUEP
32341.00
45
HM45T251HNCUEP
36872.00
75
HM75T251HNCUEP
57857.00
112.5 HM112T251HNCUEP
75082.00
150 HM150T251HNCUEP
96912.00
225 HM225T251HNCUEP 131554.00
300 HM300T251HNCUEP 162393.00
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
-15° Phase Shift
15
HM15T259HNCUEP
20822.00
30
HM30T259HNCUEP
32341.00
45
HM45T259HNCUEP
36872.00
75
HM75T259HNCUEP
57857.00
112.5 HM112T259HNCUEP
75082.00
150 HM150T259HNCUEP
96912.00
225 HM225T259HNCUEP 131554.00
300 HM300T259HNCUEP 162393.00
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
6–2.5% 2+4–
310
340
418
642
725
915
1125
1535
17D
17D
18D
20D
21D
22D
24D
25D
kVA
a
b
Catalog
No.
$ Price
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
Additional temperature rises are available; for part
numbers, see Section 6 of the Supplemental Digest or see
the Schneider Electric Product Configurator.
© 2011 Schneider Electric
All Rights Reserved
PE2E
Discount
Schedule
14-7
TRANSFORMERS
As a partner in the NEMA
Premium Transformer Program,
Schneider Electric has
determined that this product
meets the NEMA Premium
Efficiency specifications for
premium energy efficiency.
Catalog
No.
Table 14.12:
Enclosure ab
kVA
480 V Delta Primary, 208Y/120
Secondary
Enclosure ab
Table 14.11:
14
www.schneider-electric.us
General Purpose Dry
Type 600 Volts and Below
Sealed Three- and Single-Phase; Export Model; Buck and Boost
Class 7400 / Refer to Catalogs 7400CT9601, 7414CT0201
www.schneider-electric.us
Sealed Three- and Single-Phase
Transformers
Sealed Single-Phase Export Model
Transformers
Table 14.13:
These general purpose transformers accommodate
voltage systems worldwide. Export model transformers 10
kVA and smaller, certified by TUV (File no. E9571881.01)
to meet EN61558-1, are CE marked in addition to being
cULus Listed. For CE marked transformers in other
ratings, contact your local Schneider Electric
representative for CE marked transformers up to 300 kVA,
single and three phase. See page 14-11 for optional
Fingersafe™ terminal block cover kit.
C
Full Capacity Degree
Temp.
Taps
Rise
Weight
(lbs) a
Three-Phase—480 V Delta Primary; 208Y/120 V Secondary; 60 Hz;
cULus Listed; Copper Windings
3
3T2F
2016.00 2–5%FCBN
115
120
6
6T2F
2310.00 2–5%FCBN
115
145
9
9T2F
3088.00 2–5%FCBN
115
235
15
15T2F
4644.00 2–5%FCBN
115
300
30
30T2F
8536.00 2–5%FCBN
115
660
12C
12C
14C
14C
16C
Three-Phase—480 V Delta Primary; 240 V Delta Secondary; 60 Hz;
cULus Listed; Copper Windings
3
3T5F
2016.00 2–5%FCBN
115
120
12C
6
6T5F
2310.00 2–5%FCBN
115
145
12C
9
9T75F
3088.00 4–2.5%FCBN
115
235
14C
15
15T75F
4644.00 4–2.5%FCBN
115
300
14C
30
30T75F
8536.00 4–2.5%FCBN
115
660
16C
14
TRANSFORMERS
Single-Phase—240 X 480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed
0.05
50SV1A
182.00
None
55
4.2
0.10
100SV1A
214.00
None
55
4.5
0.15
150SV1A
254.00
None
55
6.2
0.25
250SV1B
270.00
None
80
10.5
0.50
500SV1B
386.00
None
80
13.8
0.75
750SV1F
460.00
None
115
15.5
1
1S1F
602.00
None
115
21.2
1.5
1.5S1F
724.00
None
115
30.1
2
2S1F
896.00
None
115
39.1
3
3S1F
1144.00
None
115
60
5
5S1F
1556.00
None
115
115
7.5
7S1F
2188.00
None
115
135
10
10S1F
2712.00
None
115
165
1A
2A
3A
4A
5A
6A
7A
8A
9A
10A
13B
13B
13B
Single-Phase—600 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed
0.05
50SV51A
182.00
None
55
4.2
0.10 100SV51A
214.00
None
55
4.5
0.15 150SV51A
262.00
None
55
6.2
0.25 250SV51B
290.00
None
80
10.5
0.50 500SV51B
408.00
None
80
13.8
0.75 750SV51F
486.00
None
115
15.5
1
1S51F
634.00
None
115
21.2
1.5
1.5S51F
758.00
None
115
30.1
2
2S51F
940.00
None
115
39.1
3
3S4F
1240.00 2–5%FCBN
115
60
5
5S4F
1676.00 2–5%FCBN
115
115
7.5
7S4F
2348.00 2–5%FCBN
115
135
10
10S4F
2922.00 2–5%FCBN
115
165
1A
2A
3A
4A
5A
6A
7A
8A
9A
10A
13B
13B
13B
Single-Phase—120x240 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed
1
1S6F
1090.00
None
115
21.2
1.5
1.5S6F
1558.00
None
115
30.1
2
2S6F
1746.00
None
115
39.1
3
3S6F
1892.00
None
115
60
5
5S6F
2418.00
None
115
110
7.5
7S6F
3216.00
None
115
135
10
10S6F
3992.00
None
115
150
7A
8A
9A
10A
13B
13B
13B
Single-Phase—208 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed
1
1S7F
1090.00
None
115
21.2
1.5
1.5S7F
1558.00
None
115
30.1
2
2S7F
1746.00
None
115
39.1
3
3S7F
1892.00
None
115
60
5
5S7F
2418.00
None
115
110
7.5
7S7F
3216.00
None
115
135
10
10S7F
3992.00
None
115
150
7A
8A
9A
10A
13B
13B
13B
Single-Phase—277 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed
1
1S8F
1090.00
None
115
21.2
1.5
1.5S8F
1558.00
None
115
30.1
2
2S8F
1746.00
None
115
39.1
3
3S8F
1892.00
None
115
60
5
5S8F
2418.00
None
115
110
7.5
7S8F
3216.00
None
115
135
10
10S8F
3992.00
None
115
150
7A
8A
9A
10A
13B
13B
13B
Table 14.14:
kVA
Sealed Export Model Transformers
Catalog No.
$ Price
Deg. C
Temp. Rise
Weight
(lbs) a
Enclosure
ab
Single-Phase—190/200/208/220/380/400/416/440 V Primary;
110/220 V Secondary; 50/60 Hz; cULus Listed d
1
1S67F
1180.00
115
21.2
2
2S67F
1716.00
115
39.1
3
3S67F
2290.00
115
55.2
5
5S67F
2554.00
115
135
7.5
7S67F
3314.00
115
165
10
10S67F
4004.00
115
165
7A
9A
10A
13B
13B
13B
Sealed Single-Phase Buck and Boost
Transformers—cULus Listed
When buck and boost transformers are interconnected as
an autotransformer, they can supply small changes in
voltage. Wiring diagrams and sizing are available from
catalog 7414CT0201 or www.buckboostcalculator.com.
Units can also be used as isolation transformers for
120 x 240 to 12/24 or 16/32 by connecting using the
directions located on the transformer’s name plate.
NOTE: When used to supply a 3-phase, 4-wire load,
the source must be 3-phase, 4-wire.
Table 14.15:
Sealed Buck and Boost Transformers
120 x 240 V Primary 60 Hz
kVA
.05
.10
.15
.25
.50
.75
1.0
1.5
2.0
3.0
a
b
c
d
240 x 480 V Primary
60 Hz
12/24 V
16/32 V
24/48 V
Secondary Secondary $ Price Secondary $ Price
50SV43A
100SV43A
150SV43A
250SV43B
500SV43B
750SV43F
1S43F
1.5S43F
2S43F
3S43F
50SV46A 206.00
100SV46A 246.00
150SV46A 276.00
250SV46B 328.00
500SV46B 420.00
750SV46F 552.00
1S46F
676.00
1.5S46F
830.00
2S46F
1072.00
3S46F
1480.00
50SV82A
284.00 55
100SV82A 344.00 55
150SV82A 386.00 55
250SV82B 460.00 80
500SV82B 588.00 80
750SV82F 774.00 115
1S82F
948.00 115
1.5S82F 1162.00 115
2S82F
1500.00 115
3S82F
2072.00 115
4.2
4.5
6.2
10.5
13.8
15.5
21.2
30.1
39.1
60
Enclosure ab
$ Price
Degree C
Temp. Rise
Weight
(lbs) a
Catalog No.
Enclosure
ab
kVA
Sealed Transformers
1A
2A
3A
4A
5A
6A
7A
8A
9A
c
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
Dimensions: 14.50 (H) x 8.60 (W) x 6.50 (D).
May be used for 240 x 480 to 120/240 at 60 Hz only.
NOTE: Refer to www.us.squared.com/buckboost for additional information.
NOTE: FCBN = full capacity below normal
14-8
PE2
Discount
Schedule
© 2011 Schneider Electric
All Rights Reserved
General Purpose Dry
Type 600 Volts and Below
Stainless Steel Enclosed; Non-Ventilated; Transformer Houses
Class 7432
www.schneider-electric.us
Stainless Steel Enclosed
Non-Ventilated
The transformers listed below have an epoxy-resin
encapsulated core and coil assembly inside a
non-ventilated, #316 stainless steel enclosure that meets
NEMA Type 3R or Type 4X requirements. All units are
painted ANSI 49 gray to give an extra layer of protection
and improve the cosmetic appearance of the device.
Non-ventilated enclosures meet the IP55 protection code
(dust and jetting water protection) per the IEC 60529
standard. This makes the product ideal for environments
where large quantities of dust, airborne contaminants,
spraying water, or any other environmental conditions (for
example, drifting snow) that a ventilated Type 3R enclosed
device would be impractical.
Three-Phase—480 V Delta Primary; 208Y/120 V Secondary; 60 Hz;
cULus Listed; NEMA Type 3R
3
3T2FSS
4116.00 2–5% FCBN
115
120
6
6T2FSS
4924.00 2–5% FCBN
115
145
9
9T2FSS
6072.00 2–5% FCBN
115
234
15
15T2FSS
7726.00 2–5% FCBN
115
300
30
30T2FSS
13022.00 2–5% FCBN
115
660
12C
12C
14C
14C
16C
Three-Phase—480 V Delta Primary; 208Y/120 V Secondary; 60 Hz;
cULus Listed; NEMA Type 4X
3
4X3T2FSS
13377.00 2–5% FCBN
115
165
6
4X6T2FSS
16003.00 2–5% FCBN
115
195
9
4X9T2FSS
19734.00 2–5% FCBN
115
290
15
4X15T2FSS
25110.00 2–5% FCBN
115
350
30
4X30T2FSS
42322.00 2–5% FCBN
115
850
54X
54X
54X
54X
55X
Single-Phase—240x480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed; NEMA Type 3R
1
1S1FSS
1274.00
None
115
21
1.5
1.5S1FSS
1778.00
None
115
30
2
2S1FSS
1914.00
None
115
39
3
3S1FSS
2684.00
None
115
60
5
5S1FSS
3880.00
None
115
110
7.5
7S1FSS
4164.00
None
115
135
10
10S1FSS
4764.00
None
115
150
15
15S1FSS
7036.00
None
115
225
25
25S1FSS
9606.00
None
115
300
7A
8A
9A
10A
13B
13B
13B
15B
15B
51X
51X
51X
52X
52X
52X
52X
53X
53X
Single-Phase—480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed; NEMA Type 3R
3
3S40FSS
2684.00 2–5% FCBN
115
5
5S40FSS
3880.00 2–5% FCBN
115
7.5
7S40FSS
4164.00 2–5% FCBN
115
10
10S40FSS
4764.00 2–5% FCBN
115
15
15S40FSS
7036.00 2–5% FCBN
115
25
25S40FSS
9606.00 2–5% FCBN
115
10A
13B
13B
13B
15B
15B
Single-Phase—480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed; NEMA Type 4X
3
4X3S40FSS
14762.00 2–5% FCBN
115
5
4X5S40FSS
12610.00 2–5% FCBN
115
7.5
4X7S40FSS
13533.00 2–5% FCBN
115
10 4X10S40FSS 15483.00 2–5% FCBN
115
15 4X15S40FSS 22867.00 2–5% FCBN
115
25 4X25S40FSS 31220.00 2–5% FCBN
115
© 2011 Schneider Electric
All Rights Reserved
PE2
NET
75
125
150
180
390
450
kVA
Non-Ventilated Transformers
Catalog
No.
$ Price
Full
Capacity
Taps
Degree C Weight
Temp.
(lbs)
Rise
a
Three-Phase—480 V Delta Primary; 208Y/120 V Secondary; 60 Hz
30
30T3HNV
8090.00 6–2.5%2 + 4–
150
340
45
45T3HNV
12396.00 6–2.5%2 + 4–
150
510
75
75T3HNV
19118.00 6–2.5%2 + 4–
150
1025
112.5 112T3HNV
25848.00 6–2.5%2 + 4–
150
1250
150 150T3HNV
33348.00 6–2.5%2 + 4–
150
2000
225 225T3HNV
50238.00 6–2.5%2 + 4–
150
2100
300 300T3HNV
55152.00 6–2.5%2 + 4–
150
3950
19E
19E
22E
24E
25E
30E
31E
Single-Phase—240X480 V Primary; 120/240 V Secondary; 60 Hz
15
15S3HNV
5042.00 6–2.5%2 + 4–c
150
230
25
25S3HNV
7562.00 6–2.5%2 + 4–c
150
310
37.5 37S3HNV
11248.00 6–2.5%2 + 4–c
150
350
50
50S3HNV
14384.00 6–2.5%2 + 4–c
150
450
75
75S3HNV
17600.00 6–2.5%2 + 4–c
150
880
100 100S3HNV
22286.00 6–2.5%2 + 4–c
150
975
17E
18E
18E
21E
24E
25E
a
b
c
Not for construction. Contact your local Schneider Electric
representative for certified prints.
For enclosure styles, see Table 14.19 on page 14-10.
When 240 V tap is used, there will be 3–5% taps: 1 above and 2 below.
NOTE: FCBN = full capacity below normal
Lugs are furnished by customer
Transformer Enclosures
Single-Phase—240x480 V Primary; 120/240 V Secondary; 60 Hz;
cULus Listed; NEMA Type 4X
1
4X1S1FSS
9555.00
None
115
48
1.5 4X1.5S1FSS
9779.00
None
115
55
2
4X2S1FSS
10527.00
None
115
55
3
4X3S1FSS
14762.00
None
115
75
5
4X5S1FSS
12610.00
None
115
125
7.5
4X7S1FSS
13533.00
None
115
150
10
4X10S1FSS
15483.00
None
115
180
15
4X15S1FSS
22867.00
None
115
390
25
4X25S1FSS
31220.00
None
115
450
60
110
135
150
225
300
Table 14.17:
TRANSFORMERS
Degree C Weight
Temp.
(lbs)
Rise
a
Designed to allow energy efficient products to be installed
in environments requiring more protection. These are
Type 3R enclosures constructed of #304 stainless steel for
corrosive protection.
Transformer enclosures are shipped separately from
transformers so they can be pre-installed on the job site.
Three standard enclosures are available for installation of
enclosure types D, H, or F.
Table 14.18:
Transformer Enclosures
Catalog No.
7400SS3R18D22D
$ Price
Enclosure ab
8444.00 18D, 18H, 19D, 20D, 21D, 22D
7400SS3R24D38D
15118.00
7400SS3R31D35F
24622.00
24D, 25D, 26D, 28D, 29D,
30D, 31D, 36D, 37D, 38D
31D, 32F, 33F, 34F,
35F, 36D, 37D, 38D
52X
52X
52X
52X
53X
53X
Discount
Schedule
14-9
14
$ Price
Full
Capacity
Taps
Enclosure
ab
kVA
Catalog
No.
Stainless Steel Enclosed Transformers
Enclosure
ab
Table 14.16:
Miscellaneous
Enclosures; Accessories
Class 7400
www.schneider-electric.us
Enclosures and Accessories
Enclosure
Number/
Style
Style A—NEMA 3R Rated
Style B—NEMA 3R Rated
14
Style C—NEMA 3R Rated
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
TRANSFORMERS
18
19
20
21
22
23
24
Styles D and H—NEMA 2 Rated
Converts to NEMA 3R with Weathershield
25
26
28
Style E—IP55 Rated
29
30
31
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
51
52
53
54
55
61
62
63
a
b
c
d
e
f
A
A
A
A
A
A
A
A
A
A
A
C
B
C
B
C
D
E
H
D
E
H
D
E
D
E
D
E
D
E
E
D
E
D
E
D
D
E
D
D
D
E
F
F
F
F
D
D
D
F
F
F
F
F
F
D
X
X
X
X
X
HX
HX
HX
Width
Depth
In.
mm
In.
mm
In.
mm
5.00
5.50
5.00
5.50
6.19
6.69
8.13
8.25
9.56
10.50
12.56
13.50
14.75
14.75
20.00
22.00
27.00
27.00
37.00
30.00
30.00
37.00
30.00
30.00
37.00
37.00
37.00
37.00
43.75
43.75
48
49.5
49.5
49.5
49.5
57.5
60
60
68
71
74
60
91.5
94
94
94
40.5
51.5
66
90
90
100
108
90
90
80
9.5
12
24
23
31.5
127
140
127
140
157
170
270
210
243
267
319
343
375
375
508
559
686
686
940
762
762
940
762
762
940
940
940
940
1111
1111
1219
1257
1257
1257
1257
1461
1524
1524
1727
1803
1880
1524
2388
2388
2388
2388
1031
1310
1679
2290
2290
2545
2748
2290
2290
2036
24
30
61
58
80
4.47
4.47
4.85
5.23
6.19
6.19
6.94
8.68
8.68
8.62
8.62
14.75
9.75
19.10
15.00
25.00
20.00
20.00
20.00
20.00
20.00
20.00
30.00
30.00
30.00
30.00
30.00
30.00
32.00
32.00
48
35
35
41
41
41
56
56
56
48
56
56
56
72
84
96
36.5
40.5
50.5
80
90
100
108
64
72
64
10
13.75
21.5
25.5
31.5
114
114
123
133
157
157
176
220
220
219
219
375
248
485
381
635
508
508
508
508
508
508
762
762
762
762
762
762
813
813
1219
889
889
1041
1041
1041
1422
1422
1422
1219
1422
1422
1422
1829
2134
2438
916
1031
1285
2036
2290
2545
2748
1628
1832
1628
25
35
55
65
80
3.44
3.44
3.75
4.06
4.69
4.69
5.31
6.56
6.56
6.50
6.50
9.00
11.75
12.25
13.50
13.50
16.00
16.00
16.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
24.00
24.00
27.00
27.00
29.5
28.5
28.5
32
32
32
36
36
36
36
40.5
36
54
54
54
54
21.75
26.5
32
50
50
60
60
44
50
44
7.75
13.75
16.38
13.75
16.25
87
87
95
103
119
119
135
167
167
165
165
229
298
311
343
343
406
406
406
508
508
508
508
508
508
508
610
610
686
686
749
724
724
813
813
813
914
914
914
914
1029
914
1372
1372
1372
1372
553
674
814
1272
1272
1527
1527
1120
1272
1120
20
35
42
35
41
Weathershield
Enclosure Dimensions and Accessories a
Height
Mounting
Table 14.19:
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Floor
Wall
Wall
Wall
Wall
Wall
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
b
WS363
e
WS363
WS363
e
WS363
WS364
e
WS364
e
WS364
e
WS380
e
e
WS381
Note 5
WS382
e
WS382
WS370A
e
WS370A
WS383
WS384
e
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
f
f
f
f
Ceiling
Wall Mounting Mounting
Bracket
Bracket
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
WMB361362
WMB361362
WMB361362
WMB363364
WMB363364
WMB363364
WMB363364
WMB363364
WMB363364
WMB363364
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
c
c
c
c
c
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
CMB363
CMB363
CMB363
CMB363
CMB363
CMB363
CMB364
CMB364
CMB364
CMB364
CMB364
CMB364
CMB380
CMB380
—
CMB381
CMB381
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Insulation
Class oC
105
105
105
130
130
180
180
180
180
180
180
180
180
180
180
180
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
180
180
180
180
180
Contact your local Schneider Electric representative for details.
These dimensions are not for construction. Contact your local Schneider Electric representative for certified prints.
Transformer is NEMA Type 3R Standard. Weathershield not required for outdoor use.
Wall mounting brackets are a standard part of transformer enclosure. Accessory not required.
Special outdoor construction required for NEMA Type 3R applications. Contact your local Schneider Electric
representative for details.
Indoor/outdoor enclosure standard. Weathershield not required.
Transformer is NEMA Type 4X Standard. Weathershield not required.
NOTE: Wall mounting brackets are used with units weighing no more than 700 lbs.
Ceiling mounting brackets are used with units weighing no more than 1200 lbs.
Weathershields are available for units 600 Volts and below. For 2.4, 5, and 15 kV units suitable for outdoor use,
contact the factory.
Style F—NEMA 1 Rated
14-10
© 2011 Schneider Electric
All Rights Reserved
Miscellaneous
Lugs; Terminal Block Covers; Weathershields; Mounting Brackets
Class 7400 / Refer to Catalog 7400CT0501
www.schneider-electric.us
Lugs are not supplied with transformer units. They must be purchased separately.
Table 14.20:
Catalog No. a
Mechanical Lug Kits
$ Price
Per Kit
Lugs
Per Kit
Grounding
Cap Screws Current Range Lugs
per Kit
Wire Range
Wire Range
Bonding
Lugs per Kit
Wire Range
Not
applicable
Not
applicable
1
1
2 to 14 STR
2 to 14 STR
Single-Phase Primary, Single-Phase Secondary, Three-Phase Delta Primary, Three-Phase Delta Secondary
DASKP100
28.00
3
1/0–14 STR.
1/4 x 1 in
Up to 100 A
DASKP250
51.00
3
350 kcmil–6 STR.
1/4 x 1 in
101 to 250 A
600 kcmil–4 STR.
DASKP400
91.00
3
(2) 250 kcmil–1/0 STR. 1/4 x 1 ¾ in 201 to 400 A
Not
Not
applicable
applicable
600 kcmil–4 STR.
DASKP600
182.00
6
(2) 250 kcmil–1/0 STR. 1/4 x 1 ¾ in 601 to 800 A
DASKP1000
DASKP1200
272.00
363.00
9
12
600 kcmil–2 STR.
600 kcmil–2 STR.
3/8 x 2 in
3/8 x 2 in
601 to 800 A
801 to 1200 A
Single-Phase Primary and Secondary, Three-Phase Wye Secondary, Three-Phase Delta with Center Tap
DASKGS100
79.00
5
1/0–14 STR.
1/4 x 1 in
Up to 100 A
1
(4) 2/0 to 14 STR
DASKGS250
118.00
5
350 kcmil–6 STR.
1/4 x 1 in
101 to 250 A
1
(4) 2/0 to 14 STR
600 kcmil–4 STR.
DASKGS400
184.00
5
1
(4) 2/0 to 14 STR
(2) 250 kcmil–1/0 STR. 1/4 x 1 ¾ in 201 to 400 A
DASKGS600
370.00
10
600 kcmil–2 STR.
1/4 x 1 ¾ in 601 to 800 A
1
(4) 350 kcmil to 6 STR.
DASKGS1000 521.00
15
600 kcmil–2 STR.
3/8 x 2 in
601 to 800 A
1
(4) 350 kcmil to 6 STR.
DASKGS1200 672.00
20
600 kcmil–2 STR.
3/8 x 2 in
801 to 1200 A
1
(4) 350 kcmil to 6 STR.
DASKGS2000 824.00
25
600 kcmil–2 STR.
3/8 x 2 in 1201 to 2000 A
1
(4) 350 kcmil to 6 STR.
1/0 to 14 STR
1
1
1
1
250 kcmil to 6 STR.
250 kcmil to 6 STR.
250 kcmil to 6 STR.
250 kcmil to 6 STR.
Subject to minimum billing and freight charges when not ordered with transformer.
Compression Lug Kits
Terminal Lugs
Transformer kVA Sizes Kit Catalog No.
15–37 ½ 1Ø
15–45 3Ø
50–75 1Ø
75–112 ½ 3 Ø
$ Price Per Kit
VCELSK1
261.00
Qty.
8
5
VCELSK2
424.00
13
100–167 1Ø
150–300 3Ø
VCELSK3
2407.00
3
26
500 3Ø
VCELSK4
2619.00
34
Catalog No.
VCEL02114S1
VCEL030516H1
Aluminum or Copper
Conductor Range (AWG
or kcmil)
#8–1/0
#4–300 kcmil
VCEL030516H1
#4–300 kcmil
VCEL030516H1
#4–300 kcmil
500–750 kcmil Al
500 kcmil Cu
500–750 kcmil Al
500 kcmil Cu
VCEL07512H1
VCEL07512H1
Hardware Included
Qty.
8
1
8
8
3
Cap Screws
1/4 x 1 in
1/4 x 2 in
1/4 x 1 in
1/4 x 2 in
1/4 x 3/4 in
16
3/8 x 2 in
21
3/8 x 2 in
Fingersafe™ terminal block cover kits for encapsulated transformers can be used to meet touch-safe requirements of
EN60-204.
Table 14.22:
Fingersafe Terminal Block Cover Kits
Fits Enclosure
7A (1 kVA)
9A (2 kVA)
10A (3 kVA)
13B (5–10 kVA)
Table 14.23:
Kit Catalog No.
7400ENT9
7400ENT11
7400ENT11
7400ENT13
Weathershields; Wall and Ceiling Mounting Brackets
Weathershields
Catalog No.
WS363
WS364
WS370A
WS380
WS381
WS382
WS383
WS384
b
c
$ Price
200.00
200.00
200.00
284.00
$ Price
299.00
299.00
2325.00
682.00
682.00
1160.00
2184.00
2464.00
Ceiling Mounting Brackets c
Catalog No.
CMB363
CMB364
CMB380
CMB381
$ Price
300.00
300.00
748.00
748.00
Wall Mounting Brackets b
Catalog No.
WMB361362
WMB363364
$ Price
663.00
663.00
Wall mounting brackets may be prohibited in some California areas requiring 12-inch spacing from wall. Wall mounting
brackets can only be used with units weighing no more than 700 lbs.
Base channels are supplied for ceiling mounting; trapeze hangers must be furnished by customer. Ceiling mounting
brackets can only be used with units weighing no more than 1200 lbs.
All ventilated units are now available with factory-installed, thermo-viewing windows. The windows allow completion of
yearly maintenance requirements without removing the front cover and accessing the transformers.
Available on all enclosures 17D through 35D. For more information, refer to Data Bulletin 7400DB1101 or contact your
local Schneider Electric representative or distributor.
© 2011 Schneider Electric
All Rights Reserved
PE2E
PE2
Discount
Schedule
14-11
TRANSFORMERS
Table 14.21:
14
a
1
Mini Power-Zone™
Unit Substation
600 Volts and Below
Class 7440 / Refer to Catalog 7440CT0901
www.schneider-electric.us
Sealed, Mini Power-Zone™ Unit Substation
The Square D™ brand Mini Power-Zone™ unit substation from Schneider Electric provides the answer to requirements
for a portable, compact power supply for small loads. This complete package yields considerable savings in installation
time and costs. Its NEMA Type 3R enclosure is suitable for both indoor and outdoor use. The transformer is 115 °C rise
and epoxy-resin encapsulated. The panel section uses Square D™ brand QO™ style circuit breakers.
NOTE: Mini Power-Zone unit substations are UL 1062 File E92978 Listed.
Mini Power-Zone unit substations include factory-installed primary main and secondary main circuit breakers. Circuit
breaker ratings are selected to meet National Electrical Code requirements and coordinate with transformer
magnetizing inrush current. Order feeder circuit breakers (QO™ plug-on type) from your local Schneider Electric
distributor. Use Qwik-Gard™ breakers for required ground fault protection. Tandem breakers are not permitted.
If bolt-on circuit breakers are required instead of plug-on, change the Mini Power-Zone part number from MPZ to
MPZB. The MPZB product line leverages the NQ interior for application requirements.
The Mini Power-Zone unit substation uses a separate transformer and panel section. This allows the panel section to
be removed and wired first if desired. Also the transformer can be replaced without disturbing the panel section and
associated wiring. The new transformer simply slides into the top of the panel section and primary and secondary leads
are reconnected to the main circuit breakers.
14
Table 14.24:
kVA
Standard Enclosure (NEMA Type 3R)
Catalog
No.
$ Price
Full
Capacity
Taps
Input
Voltage
Dimensions a
Weight
(lbs)
H
In.
W
mm
In.
D
mm
In.
Primary
Secondary
Main Circuit Main Circuit
Breaker
Breaker
mm Rating (A) Rating (A)
Max. No.
1- or 3-Pole
Output Three-Phase Panel Rated 208Y/120
TRANSFORMERS
15
22.5
30
MPZ15T2F
MPZ22T2F
MPZ30T2F
10088.00
12502.00
15338.00
480
480
480
2–5% FCBN
2–5% FCBN
2–5% FCBN
510
725
755
44.6
44.6
44.6
1133
1133
1133
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
MPZ3S40F
MPZ5S40F
MPZ7S40F
MPZ10S40F
MPZ15S40F
MPZ25S40F
3565.00
3890.00
4542.00
4938.00
6410.00
9560.00
480
480
480
480
480
480
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
175
175
200
215
390
390
32.7
32.7
32.7
32.7
42.9
42.9
831
831
831
831
1090
1090
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
MPZ15T2F25K 12395.00
MPZ22T2F25K 14809.00
MPZ30T2F25K 17645.00
480
480
480
2–5% FCBN
2–5% FCBN
2–5% FCBN
710
725
755
44.6
44.6
44.6
1133
1133
1133
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
MPZ3S40F25K 5872.00
MPZ5S40F25K 6197.00
MPZ7S40F25K 6849.00
MPZ10S40F25K 7245.00
MPZ15S40F25K 8717.00
MPZ25S40F25K 11867.00
480
480
480
480
480
480
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
175
175
200
215
390
390
32.7
32.7
32.7
32.7
42.9
42.9
831
831
831
831
1090
1090
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
MPZB15T2F
MPZB22T2F
MPZB30T2F
12610.00
15624.00
19176.00
480
480
480
2–5% FCBN
2–5% FCBN
2–5% FCBN
510
725
755
48.6
48.6
48.6
1234
1234
1234
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
a
MPZB3S40F
MPZB5S40F
MPZB7S40F
MPZB10S40F
MPZB15S40F
MPZB25S40F
4535.00
4860.00
5680.00
6170.00
8010.00
11950.00
480
480
480
480
480
480
10 or 5
28 or 13
24 or 8
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240
3
5
7.5
10
15
25
24 or 8
Max. No.
1- or 3-Pole
Output Three-Phase Panel Rated 208Y/120
15
22.5
30
28 or 13
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240—Interrupting Rating 25 AIC
3
5
7.5
10
15
25
10 or 5
Max. No.
1- or 3-Pole
Output Three-Phase Panel Rated 208Y/120—Interrupting Rating 25 AIC
15
22.5
30
24 or 8
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240
3
5
7.5
10
15
25
Feeder Breakers
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
175
175
200
215
390
390
41.0
41.0
41.0
41.0
51.0
51.0
1041
1041
1041
1041
1295
1295
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
10 or 5
28 or 13
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Dimensions: DO NOT use for construction. Contact your local Schneider Electric representative for certified prints.
NOTE: Other input voltages are available. Contact your local Schneider Electric representative for part numbers and quotations.
Available input voltages: 600, 240, and 208, single- and three-phase.
FCBN = full capacity below normal
14-12
PE2
Discount
Schedule
© 2011 Schneider Electric
All Rights Reserved
Unit Substation
600 Volts and Below
Mini Power-Zone™
Class 7440 / Refer to Catalog 7440CT0901
www.schneider-electric.us
Catalog
No.
$ Price
Dimensions a
Full
Capacity
Taps
Weight
(lbs)
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
Input
Voltage
H
W
D
Secondary
Primary
Main
Main Circuit
Circuit
Breaker
Breaker
mm Rating (A) Rating (A)
In.
mm
In.
mm
In.
710
725
755
48.6
48.6
48.6
1234
1234
1234
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
175
175
200
215
390
390
41.0
41.0
41.0
41.0
51.0
51.0
1041
1041
1041
1041
1295
1295
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
2–5% FCBN
2–5% FCBN
2–5% FCBN
710
725
755
48.6
48.6
48.6
1234
1234
1234
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
175
175
200
215
390
390
41.0
41.0
41.0
41.0
51.0
51.0
1041
1041
1041
1041
1295
1295
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
Max. No.
1- or 3-Pole
Output Three-Phase Panel Rated 208Y/120
15 MPZB15T2F25K 14917.00
22.5 MPZB22T2F25K 17931.00
30 MPZB30T2F25K 21483.00
480
480
480
480
480
480
480
480
480
480
480
480
Table 14.26:
kVA
480
480
480
480
480
480
Catalog
No.
$ Price
Full
Capacity
Taps
Input
Voltage
Dimensions a
Weight
(lbs)
H
W
D
Secondary
Primary
Main
Main Circuit
Circuit
Breaker
Breaker
mm Rating (A) Rating (A)
In.
mm
In.
mm
In.
MPZ15T2FSS
MPZ22T2FSS
MPZ30T2FSS
20108.00
23122.00
24376.00
480
480
480
710
725
755
44.6
44.6
44.6
1133
1133
1133
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
345
345
345
40
70
90
60
80
100
MPZ3S40FSS
MPZ5S40FSS
MPZ7S40FSS
MPZ10S40FSS
MPZ15S40FSS
MPZ25S40FSS
10705.00
11030.00
12428.00
12920.00
14758.00
17266.00
480
480
480
480
480
480
175
175
200
215
390
390
32.7
32.7
32.7
32.7
42.9
42.9
831
831
831
831
1090
1090
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
302
302
302
343
343
10
15
20
30
60
100
20
30
40
60
80
125
MPZB15T2FSS 25135.00
MPZB22T2FSS 28896.00
MPZB30T2FSS 30476.00
480
480
480
710
725
755
48.6
48.6
48.6
1234
1234
1234
27.4
27.4
27.4
696
696
696
13.6
13.6
13.6
48.6
48.6
48.6
40
70
90
60
80
100
a
MPZB3S40FSS
MPZB5S40FSS
MPZB7S40FSS
MPZB10S40FSS
MPZB15S40FSS
MPZB25S40FSS
13455.00
13780.00
15542.00
16159.00
18442.00
21583.00
480
480
480
480
480
480
175
175
200
215
390
390
41.0
41.0
41.0
41.0
51.0
51.0
1041
1041
1041
1041
1295
1295
12.0
12.0
12.0
12.0
17.4
17.4
305
305
305
305
442
442
11.9
11.9
11.9
11.9
13.5
13.5
302
41.0
41.0
41.0
51.0
51.0
10
15
20
30
60
100
20
30
40
60
80
125
Feeder Breakers
24 or 8
10 or 5
28 or 13
Max. No.
1- or 3-Pole
2–5% FCBN
2–5% FCBN
2–5% FCBN
24 or 8
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240
3
5
7.5
10
15
25
28 or 13
Max. No.
1- or 2-Pole
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
Output Three-Phase Panel Rated 208Y/120
15
22.5
30
10 or 5
Max. No.
1- or 3-Pole
2–5% FCBN
2–5% FCBN
2–5% FCBN
Output Single-Phase Panel Rated 120/240
3
5
7.5
10
15
25
24 or 8
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Painted 316 Stainless Steel Enclosure (NEMA Type 3R)
Output Three-Phase Panel Rated 208Y/120
15
22.5
30
28 or 13
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240
3
MPZB3S40F65K 7564.00
5
MPZB5S40F65K 7889.00
7.5 MPZB7S40F65K 8708.00
10 MPZB10S40F65K 9799.00
15 MPZB15S40F65K 11038.00
25 MPZB25S40F65K 14978.00
10 or 5
Max. No.
1- or 3-Pole
Output Three-Phase Panel Rated 208Y/120
15 MPZB15T2F65K 15638.00
22.5 MPZB22T2F65K 18652.00
30 MPZB30T2F65K 22204.00
24 or 8
Max. No.
1- or 2-Pole
Output Single-Phase Panel Rated 120/240
3
MPZB3S40F25K 6843.00
5
MPZB5S40F25K 7168.00
7.5 MPZB7S40F25K 7987.00
10 MPZB10S40F25K 8478.00
15 MPZB15S40F25K 10317.00
25 MPZB25S40F25K 14257.00
Feeder Breakers
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
2–5% FCBN
10 or 5
28 or 13
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Max.
A
40
60
80
Max.
A
20
20
30
40
60
100
Dimensions: DO NOT use for construction. Contact your local Schneider Electric representative for certified prints.
NOTE: FCBN = full capacity below normal
© 2011 Schneider Electric
All Rights Reserved
PE2
Discount
Schedule
TRANSFORMERS
kVA
Standard Enclosure (NEMA Type 3R) (continued)
14-13
14
Table 14.25:
Industrial Control
Type T and Type TF
Class 9070 / Refer to Catalog 9070CT9901
Type T transformers are designed with low impedance windings for
excellent voltage regulation and can accommodate the high inrush current
associated with contactors, starters, solenoids, and relays. Type T
transformers are manufactured using the most advanced insulating
materials and are the best choice if size and cost are of concern.
Type TF transformers include factory-installed primary and secondary fuse
blocks. Type TF transformers consist of two primary fuse blocks and one
secondary fuse block. The primary includes rejection-style clips to increase
the AIC ratings for the fuses. Since the fuse blocks are mounted on the top
of the transformer, Type TF transformers are interchangeable with Type T
transformers except for their increased height.
Table 14.27:
VA
VA
UL/CSA/
NOM
CE
Type T and TF Transformers
Type T Transformers
Catalog No.
$ Price
Type TF Transformers
Catalog No.
$ Price
Weight (lbs)
14
TRANSFORMERS
240 V x 480 V Primary, 120 V Secondary; 230 V x 460 V Primary, 115 V Secondary;
220 V x 440 V Primary, 110 V Secondary
25
25
9070T25D1
111.00
9070TF25D1
160.00
2.5
50
50
9070T50D1
116.00
9070TF50D1
165.00
2.5
75
75
9070T75D1
138.00
9070TF75D1
185.00
3.8
100
100
9070T100D1
155.00 9070TF100D1
201.00
3.8
150
150
9070T150D1
165.00 9070TF150D1
213.00
5.5
200
200
9070T200D1
204.00 9070TF200D1
255.00
5.5
250
160
9070T250D1
239.00 9070TF250D1
287.00
7.1
300
200
9070T300D1
264.00 9070TF300D1
312.00
8.5
350
250
9070T350D1
281.00 9070TF350D1
330.00
10.5
500
300
9070T500D1
350.00 9070TF500D1
395.00
11.9
750
500
9070T750D1
483.00 9070TF750D1
531.00
11.0
1000
630
9070T1000D1
585.00 9070TF1000D1
639.00
20.6
1500
1000
9070T1500D1
837.00 9070TF1500D1
884.00
34.0
2000
1500
9070T2000D1
1017.00 9070TF2000D1
1065.00
47.0
3000
2000
9070T3000D1
1412.00
—
—
60.0
5000
3000
9070T5000D1
2373.00
—
—
89.0
208 V Primary, 120 V Secondary
50
50
9070T50D3
75
75
9070T75D3
100
100
9070T100D3
150
150
9070T150D3
200
200
9070T200D3
250
160
9070T250D3
300
200
9070T300D3
350
250
9070T350D3
500
300
9070T500D3
750
500
9070T750D3
1000
630
9070T1000D3
1500
1000
9070T1500D3
2000
1500
9070T2000D3
3000
2000
9070T3000D3
5000
3000
9070T5000D3
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
1170.00
1358.00
1914.00
3015.00
9070TF50D3
9070TF75D3
9070TF100D3
9070TF150D3
9070TF200D3
9070TF250D3
9070TF300D3
9070TF350D3
9070TF500D3
9070TF750D3
9070TF1000D3
9070TF1500D3
9070TF2000D3
—
—
185.00
230.00
276.00
287.00
347.00
417.00
426.00
522.00
696.00
716.00
906.00
1221.00
1409.00
—
—
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
34.0
47.0
60.0
89.0
600 V Primary, 120 V Secondary; 575 V Primary, 115 V Secondary; 550 V Primary,
110 V Secondary
50
50
9070T50D5
135.00
9070TF50D5
185.00
2.5
75
75
9070T75D5
162.00
9070TF75D5
230.00
3.8
100
100
9070T100D5
182.00 9070TF100D5
276.00
3.8
150
150
9070T150D5
230.00 9070TF150D5
287.00
5.5
200
200
9070T200D5
293.00 9070TF200D5
347.00
5.5
250
160
9070T250D5
363.00 9070TF250D5
417.00
7.1
300
200
9070T300D5
372.00 9070TF300D5
426.00
8.5
350
250
9070T350D5
432.00 9070TF350D5
522.00
10.5
500
300
9070T500D5
471.00 9070TF500D5
696.00
11.9
750
500
9070T750D5
665.00 9070TF750D5
716.00
11.0
1000
630
9070T1000D5
837.00 9070TF1000D5
906.00
20.6
1500
1000
9070T1500D5
1170.00 9070TF1500D5
1221.00
34.0
2000
1500
9070T2000D5
1358.00 9070TF2000D5
1409.00
47.0
3000
2000
9070T3000D5
1914.00
—
—
60.0
5000
3000
9070T5000D5
3015.00
—
—
89.0
277 V Primary, 120 V Secondary
50
50
9070T50D4
75
75
9070T75D4
100
100
9070T100D4
150
150
9070T150D4
200
200
9070T200D4
250
160
9070T250D4
300
200
9070T300D4
350
250
9070T350D4
500
300
9070T500D4
750
500
9070T750D4
1000
630
9070T1000D4
1500
1000
9070T1500D4
2000
1500
9070T2000D4
3000
2000
9070T3000D4
5000
3000
9070T5000D4
14-14
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
1170.00
1358.00
1914.00
3015.00
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
VA
VA
UL/CSA/
NOM
CE
Type T Transformers
Catalog No.
$ Price
www.schneider-electric.us
Type TF Transformers
Catalog No.
$ Price
Weight (lbs)
240 V x 480 V Primary, 120/240 V Secondary; 230 V x 460 V Primary, 115/230 V Secondary;
220 V x 440 V Primary, 110/220 V Secondary
50
50
9070T50D31
188.00 9070TF50D31
372.00
2.5
75
75
9070T75D31
197.00 9070TF75D31
384.00
3.8
100
100
9070T100D31
207.00 9070TF100D31
394.00
3.8
150
150
9070T150D31
273.00 9070TF150D31
452.00
5.5
200
200
9070T200D31
353.00 9070TF200D31
498.00
5.5
250
160
9070T250D31
381.00 9070TF250D31
564.00
7.1
300
200
9070T300D31
435.00 9070TF300D31
570.00
8.5
350
250
9070T350D31
455.00 9070TF350D31
630.00
10.5
500
300
9070T500D31
509.00 9070TF500D31
638.00
11.9
750
500
9070T750D31
710.00 9070TF750D31
795.00
11.0
1000
630
9070T1000D31
837.00 9070TF1000D31
920.00
20.6
1500
1000
9070T1500D31
1224.00 9070TF1500D31
1524.00
34.0
2000
1500
9070T2000D31
1854.00 9070TF2000D31
2154.00
47.0
3000
2000
9070T3000D31
2741.00
—
—
60.0
5000
3000
9070T5000D31
3368.00
—
—
89.0
600 V Primary, 120/240 V Secondary; 575 V Primary, 115/230 V Secondary
50
50
9070T50D37
135.00 9070TF50D37
372.00
75
75
9070T75D37
162.00 9070TF75D37
384.00
100
100
9070T100D37
182.00 9070TF100D37
394.00
150
150
9070T150D37
230.00 9070TF150D37
452.00
200
200
9070T200D37
293.00 9070TF200D37
498.00
250
160
9070T250D37
363.00 9070TF250D37
564.00
300
200
9070T300D37
372.00 9070TF300D37
570.00
350
250
9070T350D37
432.00 9070TF350D37
630.00
500
300
9070T500D37
471.00 9070TF500D37
638.00
750
500
9070T750D37
665.00 9070TF750D37
795.00
1000
630
9070T1000D37
837.00 9070TF1000D37
920.00
1500
1000
9070T1500D37
1170.00 9070TF1500D37
1524.00
2000
1500
9070T2000D37
1358.00 9070TF2000D37
2154.00
3000
2000
9070T3000D37
1914.00
—
—
5000
3000
9070T5000D37
3015.00
—
—
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
34.0
47.0
60.0
89.0
380/400/415 V Primary, 115/230 V Secondary
50
50
9070T50D33
188.00
75
75
9070T75D33
197.00
100
100
9070T100D33
207.00
150
150
9070T150D33
273.00
200
200
9070T200D33
353.00
250
160
9070T250D33
381.00
300
200
9070T300D33
435.00
350
250
9070T350D33
455.00
500
300
9070T500D33
509.00
750
500
9070T750D33
710.00
1000
630
9070T1000D33
837.00
1500
1000
9070T1500D33
1224.00
2000
1500
9070T2000D33
1854.00
3000
2000
9070T3000D33
2741.00
5000
3000
9070T5000D33
3368.00
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
34.0
47.0
60.0
89.0
9070TF50D33
9070TF75D33
9070TF100D33
9070TF150D33
9070TF200D33
9070TF250D33
9070TF300D33
9070TF350D33
9070TF500D33
9070TF750D33
9070TF1000D33
9070TF1500D33
9070TF2000D33
—
—
372.00
384.00
394.00
452.00
498.00
564.00
570.00
630.00
638.00
795.00
920.00
1524.00
2154.00
—
—
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
34.0
47.0
60.0
89.0
CP8
Discount
Schedule
© 2011 Schneider Electric
All Rights Reserved
Industrial Control
Type T and Type TF
Class 9070 / Refer to Catalog 9070CT9901
www.schneider-electric.us
UL/CSA/
NOM
Type T and TF Transformers (continued)
VA
CE
Type T Transformers
Catalog No.
$ Price
208/230/460 V Primary, 115 V Secondary
50
50
9070T50D20
188.00
75
75
9070T75D20
197.00
100
100
9070T100D20
207.00
150
150
9070T150D20
273.00
200
200
9070T200D20
353.00
250
160
9070T250D20
381.00
300
200
9070T300D20
435.00
350
250
9070T350D20
455.00
500
300
9070T500D20
509.00
750
500
9070T750D20
710.00
1000
630
9070T1000D20
837.00
1500
1000
9070T1500D20
1224.00
2000
1500
9070T2000D20
1854.00
3000
2000
9070T3000D20
2741.00
Table 14.29:
Type TF Transformers
Catalog No.
9070TF50D20
9070TF75D20
9070TF100D20
9070TF150D20
9070TF200D20
9070TF250D20
9070TF300D20
9070TF350D20
9070TF500D20
9070TF750D20
9070TF1000D20
9070TF1500D20
9070TF2000D20
—
$ Price
Weight (lbs)
270.00
293.00
360.00
443.00
497.00
548.00
563.00
585.00
608.00
951.00
1320.00
1524.00
2154.00
—
4
5.5
5.5
5.5
8.5
10.5
10.5
11.9
11
20.6
34
47
60
89
240/480/600 V Primary, 120 V Secondary; 230/460/575 V Primary, 115 V Secondary;
220/440/550 V Primary, 110 V Secondary
50
50
9070T50D32
188.00 9070TF50D32
372.00
3.8
75
75
9070T75D32
197.00 9070TF75D32
384.00
3.8
100
100
9070T100D32
207.00 9070TF100D32
394.00
5.5
150
150
9070T150D32
273.00 9070TF150D32
452.00
5.5
200
200
9070T200D32
353.00 9070TF200D32
498.00
7.1
250
160
9070T250D32
381.00 9070TF250D32
564.00
8.5
300
200
9070T300D32
435.00 9070TF300D32
570.00
10.5
350
250
9070T350D32
455.00 9070TF350D32
630.00
11.9
500
300
9070T500D32
509.00 9070TF500D32
638.00
11.0
750
500
9070T750D32
710.00 9070TF750D32
795.00
20.6
1000
630
9070T1000D32
837.00 9070TF1000D32
920.00
34.0
1500
1000
9070T1500D32
1224.00 9070TF1500D32
1524.00
47.0
2000
1500
9070T2000D32
1854.00 9070TF2000D32
2154.00
60.0
3000
2000
9070T3000D32
2741.00
—
—
89.0
240/416/480/600 V Primary, 99/120/130 V Secondary; 230/400/460/575 V Primary,
95/115/125 V Secondary; 220/380/440/550 V Primary, 90/110/120 V Secondary;
208/360/416/520 V Primary, 85/104/115 V Secondary
50
50
9070T50D50
315.00 9070TF50D50
502.00
75
75
9070T75D50
341.00 9070TF75D50
528.00
100
100
9070T100D50
350.00 9070TF100D50
537.00
150
150
9070T150D50
366.00 9070TF150D50
553.00
200
200
9070T200D50
417.00 9070TF200D50
604.00
250
160
9070T250D50
455.00 9070TF250D50
642.00
300
200
9070T300D50
497.00 9070TF300D50
684.00
350
250
9070T350D50
512.00 9070TF350D50
699.00
500
300
9070T500D50
656.00 9070TF500D50
843.00
750
500
9070T750D50
761.00 9070TF750D50
948.00
1000
630
9070T1000D50
996.00 9070TF1000D50
1183.00
1500
1000
9070T1500D50
1352.00 9070TF1500D50
1524.00
2000
1500
9070T2000D50
1854.00 9070TF2000D50
2154.00
3000
2000
9070T3000D50
2741.00
—
—
4
7.2
7.1
8.5
10.5
10.5
11.9
11
11
20.6
34
47.0
60.0
89.0
240 V X 480 V Primary, 24/120 V Secondary (24 V limited to 20% Capacity)
50
50
9070T50D15
135.00
—
—
75
75
9070T75D15
162.00
—
—
100
100
9070T100D15
207.00
—
—
150
150
9070T150D15
230.00
—
—
200
200
9070T200D15
293.00
—
—
250
160
9070T250D15
381.00
—
—
300
200
9070T300D15
435.00
—
—
350
250
9070T350D15
455.00
—
—
500
300
9070T500D15
509.00
—
—
750
500
9070T750D15
710.00
—
—
1000
630
9070T1000D15
837.00
—
—
1500
1000
9070T1500D15
1224.00
—
—
2000
1500
9070T2000D15
1854.00
—
—
3000
2000
9070T3000D15
2229.00
—
—
5000
3000
9070T5000D15
3015.00
—
—
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
34.0
47.0
60.0
89.0
© 2011 Schneider Electric
All Rights Reserved
CP8
Type T Transformers
VA
VA
UL/CSA/ NOM
CE
Catalog No.
$ Price
Weight (lbs)
240 V x 480 V Primary, 24 V Secondary
50
50
9070T50D2
75
75
9070T75D2
100
100
9070T100D2
150
150
9070T150D2
200
200
9070T200D2
250
160
9070T250D2
300
200
9070T300D2
350
250
9070T350D2
500
300
9070T500D2
750
500
9070T750D2
1000
630
9070T1000D2
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
208 V Primary, 24 V Secondary
50
50
75
75
100
100
150
150
200
200
250
160
300
200
350
250
500
300
750
500
1000
630
9070T50D14
9070T75D14
9070T100D14
9070T150D14
9070T200D14
9070T250D14
9070T300D14
9070T350D14
9070T500D14
9070T750D14
9070T1000D14
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
120 V x 240 V Primary, 24 V Secondary
50
50
9070T50D23
75
75
9070T75D23
100
100
9070T100D23
150
150
9070T150D23
200
200
9070T200D23
250
160
9070T250D23
300
200
9070T300D23
350
250
9070T350D23
500
300
9070T500D23
750
500
9070T750D23
1000
630
9070T1000D23
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
120 V Primary, 12/24 V Secondary
50
50
75
75
100
100
150
150
200
200
250
160
300
200
350
250
500
300
750
500
1000
630
9070T50D13
9070T75D13
9070T100D13
9070T150D13
9070T200D13
9070T250D13
9070T300D13
9070T350D13
9070T500D13
9070T750D13
9070T1000D13
135.00
162.00
182.00
230.00
293.00
363.00
372.00
432.00
471.00
665.00
837.00
2.5
3.8
3.8
5.5
5.5
7.1
8.5
10.5
11.9
11.0
20.6
MultiTap 24 Volt Control Primary
208/240/277/380/480 V Primary, 24 V Secondary
50
50
9070T50D19
75
75
9070T75D19
100
100
9070T100D19
150
150
9070T150D19
200
200
9070T200D19
250
160
9070T250D19
300
200
9070T300D19
350
250
9070T350D19
500
300
9070T500D19
750
500
9070T750D19
1000
630
9070T1000D19
188.00
197.00
207.00
273.00
353.00
381.00
435.00
455.00
509.00
710.00
837.00
4.0
7.2
7.2
7.1
8.5
10.5
11.9
11.9
11.0
20.6
34.0
Discount
Schedule
14-15
TRANSFORMERS
VA
14
Table 14.28:
Industrial Control
Type T and Type TF
Class 9070 / Refer to Catalog 9070CT9901
Table 14.30:
Type T Dimensions
Type
Voltage Code
T25
D1
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D20, D32
D19, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37,
D20, D32
D19, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D20, D32
D19, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37,
D20
D19, D32
D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D20
D19, D32
D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D20
D19, D32, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D19, D20
D32, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D19, D20, D32
D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D19, D20, D32, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D19, D20, D32, D50
D1, D5, D2, D23, D14, D13,
D15, D3, D4, D31, D33, D37
D19, D20, D32, D50
D1, D5, D15, D3, D4, D31,
D33, D37
D20, D32, D50
D1, D5, D15, D3, D4, D31,
D33, D37
D20, D32, D50
D3, D4, D15, D31, D33, D37
D20
D1, D5,
D32, D50
D3, D4, D15, D31, D33, D37
D1, D5,
D1, D5, D15, D3, D4, D31,
D33, D37
D20, D32, D50
T50
T75
T100
T150
14
T200
T250
TRANSFORMERS
T300
T350
T500
T750
T1000
T1500
T2000
T3000
T5000
TF2000
14-16
Table 14.31:
Height
Width
Depth
Accessory
Key
In.
2.58
mm
66
In.
3.00
mm
76
In.
3.09
mm
79
2.58
66
3.00
76
3.09
79
2.89
2.89
73
73
3.38
3.38
86
86
3.34
85
4.43 113.0
2.58
66
3.00
76
3.09
79
I
3.20
81
3.75
95
4.7
119.4
III, IV
2.89
73
3.38
86
3.34
85
3.20
3.20
81
81
3.75
3.75
95
95
3.59
91
4.7 119.4
3.20
81
3.75
95
3.59
3.20
3.84
81
98.0
3.20
81
3.20
3.84
3.84
81
98.0
98.0
3.21
82
3.84
3.84
98.0
98.0
91
3.75
95
4.7 119.4
4.50 114.3 4.74 120.4
3.75
95
3.59
91
3.75
95
4.7 119.4
4.50 114.3 4.74 120.4
4.50 114.3 5.11 129.8
3.75
95
5.30
135
4.50 114.3 4.74 120.4
4.50 114.3 5.11 129.8
I
I
II
III, IV
I
II
III, IV
I
II
III, IV
I
II
II
III, IV
I
II
III, IV
3.84
98.0
4.50 114.3 4.74 120.4
I
3.84
3.84
98.0
98.0
4.50 114.3 5.11 129.8
4.50 114.3 5.49 139.4
II
III, IV
3.84
98.0
4.50 114.3 5.11 129.8
3.84 98.0 4.50 114.3 5.49 139.4
4.51 114.6 5.25 133.4 5.61 142.5
3.84
98.0
4.50 114.3 5.49 139.4
4.51 114.6 5.25 133.4 5.61 142.5
I
II
III, IV
I
III, IV
4.51 114.6 5.25 133.4 5.61 142.5
I
4.51 114.6 5.25 133.4 6.30 160.0
III, IV
4.51 114.6 5.25 133.4 6.30 160.0
I
6.17 156.7 7.06 179.3 5.92 150.4
III, IV
6.17 156.7 7.06 179.3 5.92 150.4
I
6.17 156.7 7.06 179.3 7.17 182.1
III, IV
6.17 156.7 7.06 179.3 7.17 182.1
I
7.63 193.8 9.00 228.6 6.38 162.1
7.63 193.8 9.00 228.6 6.38 162.1
7.63 194 9.00 229 8.31 211
8.75 222 9.00 229 7.24 184
8.75 222 9.00 229 9.15 232
7.63 194 9.00 229 8.31 211
8.75 222 9.00 229 9.15 232
III, IV
I
II
I
III, IV
I
I
7.46 189.5
7.06 179.3 7.17 182.1
I
9.00 228.6 6.38 162.1
III, IV
CP8
Type
Voltage Code
Height
In.
TF25
D1
4
D1, D5, D3, D4, D31, D33, D37 4
TF50
D20, D32
4.25
D50
4.25
D1, D5, D3, D4, D31, D33,
4.25
D37, D20, D32
TF75
D50
4.55
D1, D5,D3, D4, D31, D33, D37 4.25
TF100
D20, D32
4.55
D50
4.55
D1, D5, D3, D4, D31, D33,
4.55
D37, D20
TF150
D32
4.55
D50
5.1
D1, D5, D3, D4, D31, D33, D37 4.55
D20
5.1
TF200
D32
5.1
D50
5.1
D1, D5, D3, D4, D31, D33, D37 4.55
TF250
D20
5.1
D32, D50
5.1
D1, D5, D3, D4, D31, D33, D37 5.1
TF300
D20
5.1
D32, D50
5.1
D1, D5, D3, D4, D31, D33, D37 5.1
TF350
D20, D32
5.1
D50
5.73
D1, D5, D3, D4, D31, D33, D37 5.1
TF500
D20, D32, D50
5.73
D1, D5,D3, D4, D31, D33, D37 5.73
TF750
D20, D32, D50
5.73
D1, D5, D3, D4, D31, D33, D37 5.73
TF1000
D20, D32, D50
7.46
D1, D5, D15, D3, D4, D31,
7.46
D33,
D37
TF1500
D20, D32, D50
7.46
D1, D5, D15, D3, D4, D31,
7.46
D33, D37
TF2000
D20, D32, D50
Discount
Schedule
www.schneider-electric.us
Type TF Dimensions
Width
Depth
mm
101.6
101.6
107.9
107.9
In.
3.00
3.00
3.38
3.38
mm
76
76
86
86
In.
mm
3.09
79
3.09
79
3.34
85
4.43 113.0
107.9
3.00
76
3.09
115.6
107.9
115.6
115.6
3.75
3.38
3.75
3.75
95
86
95
95
4.7 119.4
3.34
85
3.59
91
4.7 119.4
79
Accessory
Key
I
I
II
III, IV
I
III, IV
I
II
III, IV
115.6
3.75
95
3.59
91
I
115.6
129.6
115.6
129.6
129.6
129.6
115.6
129.6
129.6
129.6
129.6
129.6
129.6
129.6
145.6
129.6
145.6
145.6
145.6
145.6
189.5
3.75
4.50
3.75
3.75
4.50
4.50
3.75
4.50
4.50
4.50
4.50
4.50
4.50
4.50
5.25
4.50
5.25
5.25
5.25
5.25
7.06
95
114.3
95
95
114.3
114.3
95
114.3
114.3
114.3
114.3
114.3
114.3
114.3
133.4
114.3
133.4
133.4
133.4
133.4
179.3
4.7
4.74
3.59
4.7
4.74
5.11
5.30
4.74
5.11
4.74
5.11
5.49
5.11
5.49
5.61
5.49
5.61
5.61
6.30
6.30
5.92
119.4
120.4
91
119.4
120.4
129.8
135
120.4
129.8
120.4
129.8
139.4
129.8
139.4
142.5
139.4
142.5
142.5
160.0
160.0
150.4
II
III, IV
I
II
II
III, IV
I
II
III, IV
I
II
III, IV
I
II
III, IV
I
III, IV
I
III, IV
I
III, IV
189.5
7.06 179.3 5.92 150.4
I
189.5
7.06 179.3 7.17 182.1
III, IV
189.5
7.06 179.3 7.17 182.1
I
9.00 228.6 6.38 162.1
III, IV
© 2011 Schneider Electric
All Rights Reserved
Industrial Control
Type T and Type TF
Class 9070 / Refer to Catalog 9070CT9901
www.schneider-electric.us
21.00
30.00
30.00
10
10
10
SF25A
25–200
25–150
—
210.00
300.00
300.00
SF25B
250–2000
200–2000
25–2000
SF41A b
25–200
25–150
—
200–2000
25–2000
Kits must be ordered separately. Also supplied in bulk packages of 100 individual covers.
Add “B” to Type number (available only on FSC1B and FSC2B).
Table 14.33:
Separate NEMA Type 1 Enclosures for Transformers
Class 9991 Type
UE7
For Use With
EO1, EO17, T50
EO2, EO3, EO4, EO15, EO16, EO18, EO19, T75, T100, T150, T200, T250,
T300, T350, T500
EO51, EO61, T750, T1000, EO71
LG1
SDG4
SF41B b 250–2000
FB1A
25–200
25–150
—
FB1B
250–2000
200–2000
25–2000
NOTE: User must drill mounting holes. See pages 16-106 and 16-107 for dimensions.
I
II
III, IV
Description
Two jumpers
per bag
Minimum order
3003302754 T250–T5000 T200–T3000 T25–T3000
of 50 kits
3003302753
T25–T200
T25–T150
—
Order
Qty.
Type Accessory Key
Catalog
No.
Order
$ Price
Jumper Kits
$ Price
Each
Table 14.34:
b
8.00
50
400.00
5.00
50
250.00
NOTE: Jumpers are supplied with voltage codes that require them. If additional kits are required,
order per above chart.
Table 14.35:
Fuse Pullers (For Use on TF and FB Accessory)
$ Price
Each
33.00
Catalog No.
9070FP1
Order
Qty.
10
Order
$ Price
330.00
Field Installed Fuse Options
Table 14.37:
Type
—
200–2000 25–2000
87.00
1
87.00
87.00
1
87.00
Primary Fusing
Type Accessory Key
I
Order
$ Price
25–150
Description
Three pole fuse block for
primary and secondary
fusing, accommodates
1-1/2 x 13/32 inch midget
fuse (2 rejection and
1 non-rejection)
Three pole fuse block for
primary and secondary
fusing, accommodates
1-1/2 x 13/32 inch midget
fuse (2 rejection and
1 non-rejection)
Order
$ Price
250–2000
III, IV
Order
Qty.
25–200
II
Order
Qty.
FB3B
I
$ Price
Each
Type
FB3A
Primary and Secondary Fusing
Type Accessory Key
II
III, IV
Description
Two pole fuse block for
primary fusing,
FB2A 25–200
25–150
—
accommodates
1-1/2 x 13/32 inch midget fuse
(2 rejection)
Two pole fuse block for
primary fusing,
FB2B 250–2000 200–2000 25–2000
accommodates
1-1/2 x 13/32 inch midget fuse
(2 rejection)
© 2011 Schneider Electric
All Rights Reserved
$ Price
Each
Table 14.36:
Secondary fuse block
accommodates
1-1/4 x 1/4 inch fuse
Secondary fuse block
accommodates
1-1/4 x 1/4 inch fuse
Secondary fuse clip
accommodates
1-1/2 x 13/32 inch
midget fuse
Secondary fuse clip
accommodates
1-1/2 x 13/32 inch
midget fuse
One pole fuse block
for secondary fusing,
accommodates
1-1/2 x 13/32 inch
midget fuse
(1 non-rejection)
One pole fuse block
for secondary fusing,
accommodates
1-1/2 x 13/32 inch
midget fuse
(1 non-rejection)
75.00
75.00
1
75.00
CP8
210.00
21.00
10
210.00
18.00
10
180.00
18.00
10
180.00
53.00
1
53.00
53.00
1
53.00
Selection Guide
1. Determine the inrush and sealed VA of each coil in the control circuit
and the VA of all other components.
2. Total the sealed VA of all operating coils and the VA of all other
loads. (This determines the minimum VA size required for the
circuit.)
3. Total the inrush VA of all coils that are starting at the same time and
all loads and coils that are running.
4. Locate a value in the VA column of Table 14.39 that is equal to or
greater than the value calculated in step 2.
5. In the VA row selected in step 4, find the inrush value under the
appropriate voltage regulation column of Table 14.39. If this value is
greater than the calculated value from step 3, this is the correct
transformer VA rating.
If the inrush value on the selected VA row is not greater than the
calculated value from step 3, use the next higher transformer VA
rating, that is, the rating on the next row.
If your supply voltage is stable and fluctuates less than 5%, Schneider
Electric recommends you use the 90% secondary voltage column. If
your supply voltage is not stable and fluctuates more than 10% we
recommend you use the 95% secondary voltage column. We
recommend that you never use the 85% secondary voltage column
since magnetic devices lose life expectancy if they are continuously
started at 85% of rated voltage.
Regulation Chart for Type T
Inrush VA @ 20% power factor
1
10
SF41 can be installed on the following voltage codes: D1, D5, D24, D3, D4, D51, D2,
D23, D14, D25, D20, D95, D19, D22, D36.
I = voltage codes D1, D2, D3, D4, D5, D12, D13, D14, D15, D23, D24, D25, D31, D32, D33,
D36, D5
II = voltage codes D18, D20
III, IV= voltage codes D19, D50
c
Table 14.39:
75.00
21.00
VA
50
75
100
150
200
250
300
350
500
750
1000
1500
2000
3000
5000
Discount
Schedule
95%
Secondary
Voltage
193
271
339
666
588
1416
1634
1894
3197
3770
6587
19324
31384
26539
53111
90%
Secondary
Voltage
266
396
499
893
815
1910
2184
2592
4104
5515
9079
23983
38777
39934
85265
85%
Secondary
Voltage
339
20
659
1120
1041
2388
2709
3261
4981
7231
11430
28607
6161
52713
116277
Inrush VA @ 40% power factor
95%
Secondary
Voltage
151
210
266
529
459
1057
1194
1392
2374
2887
4706
15066
24794
19355
39368
90%
Secondary
Voltage
215
318
404
731
659
1494
1681
2005
3195
4391
6886
19361
31630
30721
66309
85%
Secondary
Voltage
282
430
549
942
866
1936
2169
621
4019
5945
9051
23756
38667
42216
93882
14-17
TRANSFORMERS
2 covers per kit
2 covers per kit
2 covers per kit
Description
III, IV
14
Description
II
Order
$ Price
a
III, IV
—
—
T25–T5000
Order
Qty.
FSC1
FSC2
FSC23
I
II
T25–T200
T25–T150
T250–T5000 T250–T5000
—
—
$ Price
Each
Type Accessory Key a
Type
I
Fingersafe™ Covers (Not Supplied with Unit)
Order
$ Price
Type
Table 14.32:
Field-Installable Secondary Fuse Clips
Type Accessory Key c
Order
Qty.
Table 14.38:
The Type T control transformers offer multiple field installable accessories:
$ Price
Each
Accessories
Transformer Disconnects
NEMA Type 1and Type 12 Enclosures
Class 9070 / Refer to Catalog 9070CT0301
www.schneider-electric.us
Transformer Disconnects for NEMA Type 1 and Type 12 Enclosures
Square D™ brand transformer disconnects mount inside or outside a control system
enclosure. The transformer disconnect being connected directly to the 480 V system
controls power for auxiliary, single-phase loads when the main three-phase disconnect is
either ON or OFF. The transformer disconnect is normally wired to the line side of the
control panel's main disconnect.
This convenient source of 120 V power can be used for auxiliary or isolated loads, such as
panel lighting, portable power tools, and programmable controller equipment.
Units consist of copper-wound transformers, a disconnect switch, and primary and
secondary fuse blocks. All blocks are installed in NEMA Type 1 or Type 12 enclosures.
Transformer disconnects are UL Listed. Use Square D™ brand Type TF industrial control
transformers and Square D™ brand disconnect switches.
Multiple enclosure options and accessories are available. See catalog 9070CT0301 or
contact your local Schneider Electric representative or distributor.
Transformer disconnects are available in NEMA Type 1
Standard, NEMA Type 12 Standard, and NEMA Type 1 Mini.
14
Table 14.40:
VA
•
•
•
•
Standard NEMA Type 1
Mini NEMA Type 1
Compact NEMA Type 1
NEMA Type 12
Transformer Disconnects
Catalog
No.
$ Price
Without Outlet
Catalog
No.
$ Price
H
Enclosure
With Outlet
W
D
In.
mm
In.
mm
In.
mm
Weight
(lbs)
TRANSFORMERS
NEMA Type 1 Enclosure, 240 x 480 V Primary, 120 V Secondary (Compact Design)
100
9070MN100G0D1
1338.00
9070MN100G0D1G13
250
9070MN250G0D1
1488.00
9070MN250G0D1G13
500
9070MN500G0D1
1640.00
9070MN500G0D1G13
750
9070SK750G3D1
1721.00
9070SK750G3D1G13
1000
9070SK1000G3D1
2259.00 9070SK1000G3D1G13
1500
9070SK1500G3D1
3351.00 9070SK1500G3D1G13
2000
9070SK2000G3D1
4257.00 9070SK2000G3D1G13
3000
9070SK3000G3D1
5696.00 9070SK3000G3D1G13
1551.00
1701.00
1853.00
1934.00
2472.00
3564.00
4470.00
5909.00
G0
G0
G0
G3
G3
G3
G3
G3
7.00
7.00
7.00
13.40
13.40
13.40
13.40
13.40
178
178
178
340
340
340
340
340
11.30
11.30
11.30
14.80
14.80
14.80
14.80
14.80
287
287
287
376
376
376
376
376
7.81
7.81
7.81
10.21
10.21
10.21
10.21
10.21
198
198
198
259
259
259
259
259
16
21
24
47
51
65
71
85
NEMA Type 1 Enclosure, 240 x 480 V Primary, 120 V Secondary
250
9070SK250G1D1
1353.00
9070SK250G1D1G13
500
9070SK500G1D1
1488.00
9070SK500G1D1G13
750
9070SK750G1D1
1674.00
9070SK750G1D1G13
1000
9070SK1000G1D1
2199.00 9070SK1000G1D1G13
1500
9070SK1500G2D1
3255.00 9070SK1500G2D1G13
2000
9070SK2000G2D1
3699.00 9070SK2000G2D1G13
3000
9070SK3000G2D1
4955.00 9070SK3000G2D1G13
1566.00
1701.00
1887.00
2412.00
3468.00
3912.00
5168.00
G1
G1
G1
G1
G2
G2
G2
9.40
9.40
9.40
9.40
13.40
13.40
13.40
239
239
239
239
340
340
340
11.80
11.80
11.80
11.80
14.80
14.80
14.80
300
300
300
300
376
376
376
8.96
8.96
8.96
8.96
12.21
12.21
12.21
228
228
228
228
310
310
310
26
28
33
37
67
73
87
NEMA Type 1 Enclosure, 480 V Primary, 120 V Secondary
5000
9070SK5000G4D9
7748.00
9070SK5000G4D9G13
7961.00
G4
16.90
429
18.20
462
14.50
368
125
NEMA Type 12 Enclosure, 240 x 480 V Primary, 120 V Secondary
250
9070SK250A2D1
3281.00
9070SK250A2D1G13
500
9070SK500A2D1
3417.00
9070SK500A2D1G13
750
9070SK750A2D1
3621.00
9070SK750A2D1G13
1000
9070SK1000A2D1
3723.00 9070SK1000A2D1G13
1500
9070SK1500A2D1
4095.00 9070SK1500A2D1G13
2000
9070SK2000A2D1
4364.00 9070SK2000A2D1G13
3000
9070SK3000A2D1
5448.00 9070SK3000A2D1G13
3494.00
3630.00
3834.00
3936.00
4308.00
4577.00
5661.00
A2
A2
A2
A2
A2
A2
A2
16.50
16.50
16.50
16.50
16.50
16.50
16.50
419
419
419
419
419
419
419
14.50
14.50
14.50
14.50
14.50
14.50
14.50
368
368
368
368
368
368
368
13.50
13.50
13.50
13.50
13.50
13.50
13.50
343
343
343
343
343
343
343
46
49
53
58
79
85
99
NEMA Type 12 Enclosure, 240 x 480 V Primary, 120 V Secondary, Flange Switch
250
9070SK250A3D1
3281.00
9070SK250A3D1G13
500
9070SK500A3D1
3417.00
9070SK500A3D1G13
750
9070SK750A3D1
3621.00
9070SK750A3D1G13
1000
9070SK1000A3D1
3723.00 9070SK1000A3D1G13
1500
9070SK1500A3D1
4095.00 9070SK1500A3D1G13
2000
9070SK2000A3D1
4364.00 9070SK2000A3D1G13
3494.00
3630.00
3834.00
3936.00
4308.00
4577.00
A3
A3
A3
A3
A3
A3
15.50
15.50
15.50
15.50
15.50
15.50
394
394
394
394
394
394
17.00
17.00
17.00
17.00
17.00
17.00
432
432
432
432
432
432
10.00
10.00
10.00
10.00
10.00
10.00
254
254
254
254
254
254
48
53
57
61
75
86
14-18
CP8
Discount
Schedule
© 2011 Schneider Electric
All Rights Reserved
Instrument, 600 Volt
Class
Voltage and Current Transformers
Class 4210 / Refer to Catalog 4210CT9701
www.schneider-electric.us
Voltage Transformers
Schneider Electric offers three models of voltage transformers, each suited for a particular application:
• Model 450R
— Applications requiring accurate voltage measurement within the 0.3% accuracy class
— Switchboards with 1% instrumentation
• Model 460R
— Applications with less critical accuracy and low burden requirements
— Transducers and other panelboard monitoring
• Model E470
— Extremely accurate voltage measurement
— Low burden applications, such as PLC modules and similar, high-impedance electronic devices
Table 14.41:
Voltage Transformers
Application
Model Number
Accuracy/Burden and Thermal Rating
Large Burden
Small Burden
Small Burden
450R
460R
470R
0.3 W, X, M, Y; 500 VA Thermal
0.6 W, 1.2X; 150 VA Thermal
0.3W, 1.2X; 150 VA Thermal
Primary Voltages
(120 V Secondary)
120–600 V
120–600 V
120–600 V
Current Transformers
Current Transformers
Window Diameter
In.
1.3
28
1.56
40
1.94
49
2.25
57
2.34
59
2.50
63
3.50
89
4.00
102
4.25
108
4.50
114
5.25
5.75
6.25
133
146
159
6.88
175
8.13
2.12 x 4.25
3.50 x 6.25
3.56 x 8.81
7.45 x 3.75
206
54 x 108
89 x 159
90 x 224
189 x 95
a
b
© 2011 Schneider Electric
All Rights Reserved
mm
Usual Application
Model Number
2NR
5NR
54R
64R
66R
7RL
Metering
Metering or
Control Relaying
High Output
Relaying
X
X
X
X
X
7RT
74R
76R
74RFT
180R
200R
201R
100R
110R
170R
312R
202R
203R
120R
210R
151R
152R
140R
260R
273
270R
560R
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Primary Range in Amperes a UL Recognized
Product
50–300
100–600
100–600
100–750
100–750
50–1500
50–1500
150–1500 b
200–1500
200–1500
—
100–1500
100–600
100–800
200–2000
200–2000
200–2000
600–4000
100–1000
100–3000
200–3000
200–3000
600–4000
50–4000
50–6000
100–4000
200–4000
400–5000
400–5000
Yes
With a 5 A secondary.
With a 1 A secondary.
14-19
14
Table 14.42:
TRANSFORMERS
Current transformers are low cost, compact units that offer good electrical performance in a general purpose
transformer.
• They are very easy to mount on the conductors.
• All current transformers feature permanent polarity marks molded into the case.
The following types of current transformers are available:
• General purpose
• Toroidal (single ratio)
• Rectangle window (single ratio)
• Split core
• Bushing (single ratio) (multi-ratio)
For part numbers, see Section 6 of the Supplemental Digest or see the Schneider Electric Product Configurator.
Contact your local Schneider Electric representative for other available features.
Three- and Single-Phase; 1201–15,000 Volts
Energy Efficient, Dry Type
2.4, 5, and 15 kV
Class 7432
www.schneider-electric.us
Ordering
Information
To complete the threeor single-phase
catalog numbers on
this page:
14
TRANSFORMERS
1. In Table 14.44 or
Table 14.46, find
your required
voltage rating.
2. Note the voltage
code for that
rating.
3. In Table 14.43 or
Table 14.45, find
the transformer
with the required
voltage rating.
4. Replace the ( ) in
the catalog
number of that
transformer with
the voltage code
noted in step 2.
Example 1: 1000 kVA, 3Ø,
60 Hz, 150 °C temp. rise,
60 kV BIL, NEMA sound level,
ventilated indoor enclosure,
13.2 kV delta 480Y/277, 2-2.5%
full capacity taps. 2AN and 2BN
= catalog no. EE1000T51H.
Example 2: 750 kVA 3Ø, 60 Hz,
80 °C temp. rise, 60 kV BIL,
NEMA sound level, ventilated
indoor enclosure, 4160 V Delta,
480Y/277, 2-2.5% full capacity
taps. 2AN and 2BN = catalog
no. EE750T19HB. Add 20% to
listed price.
Example 3: 167 kVA,
2400/4160Y-120/240, 1Ø,
60 Hz = catalog no.
EE167S13H. The unit would be
supplied with 2–2.5% above
and 2–2.5% full capacity below
normal taps on the primary.
1201–15,000 V, Three-Phase, Indoor
Transformers
1201–15,000 V, Single-Phase, Indoor
Transformers
All transformers are built with 220 oC insulation and
150 oC temperature rise. For 115 oC rise add 10% to
price and F to catalog number. For 80 oC rise add 20% to
price and B to catalog number. Check with your local
Schneider Electric representative to verify dimensional
changes and weights and for copper windings.
Standard high voltage taps: 4-2.5%, 2AN and 2BN. For
4-2.5% FCBN, add BN to catalog number.
All transformers are built with 220 oC insulation and
150 oC temperature rise. For 115 oC rise add 10% to price
and F to catalog number. For 80 oC rise add 20% to price
and B to catalog number, and check with your local
Schneider Electric representative for dimensional changes.
Standard high voltage taps: 4–2.5%, 2AN and 2BN. For
4-2.5% FCBN, add BN to catalog number.
Table 14.43:
kVA
Catalog No.
$ Price
Enclosure a
Weight (lbs)
36D
37D
37D
38D
38D
39F
40F
40F
41F
42F
15 kV Voltage Class, 60 Hz,150 °C Rise
112.5
EE112T( )H
58586.00
150
EE150T( )H
72309.00
225
EE225T( )H
98125.00
300
EE300T( )H
137445.00
500
EE500T( )H
139650.00
750 b
EE750T( )H
165870.00
1000 b
EE1000T( )H
210915.00
1500 b
EE1500T( )H
241298.00
2000 b
EE2000T( )H
282852.00
2500 b
EE2500T( )H
327549.00
3000 b
EE3000T( )H
421833.00
38D
38D
45D
45D
44F
39F
40F
40F
41F
42F
42F
a
b
Table 14.45:
2200
2420
3080
3630
5500
6600
8140
9900
11990
13420
16940
Single-Phase Transformers
Weight (lbs)
Enclosure c
2.4 kV Voltage Class, 60 Hz, 150 °C Rise
167
EE167S( )H
45444.00
250
EE250S( )H
59253.00
333
EE333S( )H
72783.00
1650
2420
3300
38D
38D
45D
5 kV Voltage Class, 60 Hz, 150 °C Rise
167
EE167S( )H
48777.00
250
EE250S( )H
63312.00
333
EE333S( )H
77478.00
1650
2420
3520
38D
38D
45D
15 kV Voltage Class, 60 Hz, 150 °C Rise
167
EE167S( )H
56136.00
250
EE250S( )H
72705.00
333
EE333S( )H
86835.00
2640
3740
5500
38D
45D
45D
kVA
2.4 kV and 5 kV Voltage Class, 60 Hz, 150 °C Rise
112.5
EE112T( )H
51125.00
1540
150
EE150T( )H
62805.00
1760
225
EE225T( )H
84500.00
2090
300
EE300T( )H
101965.00
2310
500
EE500T( )H
119077.00
3520
750 b
EE750T( )H
149110.00
4290
1000 b
EE1000T( )H
185080.00
8140
1500 b
EE1500T( )H
222440.00
9900
2000 b
EE2000T( )H
255265.00
11990
2500 b
EE2500T( )H
308692.00
13420
c
Catalog No.
Table 14.44:
kV Class
2.4
30 kV BIL
5
30 kV BIL
Three-Phase Voltage Codes
Code
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
Primary
2400 Delta
2400 Delta
2400 Delta
2400 Delta
2400 Delta
4160 Delta
4160 Delta
4160 Delta
4160 Delta
4160 Delta
4160Y/2400
4160Y/2400
4160/2400
4800 Delta
4800 Delta
4800 Delta
4800 Delta
4800 Delta
7200 Delta
7200 Delta
7200 Delta
7200 Delta
7200 Delta
12000 Delta
12000 Delta
12000 Delta
12000 Delta
12000 Delta
12470 Delta
12470 Delta
12470 Delta
12470 Delta
12470 Delta
12470Y/7200
12470Y/7200
12470Y/7200
13200 Delta
13200 Delta
13200 Delta
13200 Delta
13200 Delta
13200Y/7620
13200Y/7620
13200Y/7620
13800 Delta
13800 Delta
13800 Delta
13800 Delta
13800 Delta
PE6D
Secondary
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
240 Delta
480 Delta
600 Delta
208Y/120
480Y/277
240 Delta
480 Delta
600 Delta
Discount
Schedule
$ Price
See 14-10 for enclosures. Enclosures are for indoor use only.
Transformers suitable for outdoor use are available on special order.
Adding a weather shield will not make medium voltage transformer
suitable for outdoor use.
Table 14.46:
Single-Phase Voltage Codes
kV Class
2.4
30 kV BIL
5
30 kV BIL
See 14-10 for enclosures. Enclosures are for indoor use only.
Transformers suitable for outdoor use are available on special order.
Adding a weather shield will not make medium voltage transformer
suitable for outdoor use.
Dimensions and prices listed for 480 volt secondary only. For 240 V or
208 V, contact your local Schneider Electric representative.
15
60 kV BIL
14-20
Three-Phase Transformers
15
60 kV BIL
Code
14
25
13
15
16
24
26
27
17
18
28
29
19
20
21
22
23
30
31
32
33
34
Primary
2400 Delta
2400 Delta
2400/4160Y
4800 Delta
4160 Delta
2400/4160Y
4800 Delta
4160 Delta
4160/7200Y
7200
4160/7200Y
7200
4160/12470Y
7620/13200Y
12470
13200
13800
4160/12470Y
7620/13200Y
12470
13200
13800
Secondary
120/240
277
120/240
20/240
20/240
277
277
277
120/240
120/240
277
277
120/240
120/240
120/240
120/240
120/240
277
277
277
277
277
Special Notes
1. Distribution class lightning arresters are recommended
as good practice, but are not included in the above
prices. Arrester addition may affect dimensions. Contact
your local Schneider Electric representative.
2. For 15 kV transformers requiring bottom entrance or
exit, a separate compartment is required for adequate
termination space and clearance. Transformers
1500 kVA and above with top entrance or exit may
require a separate compartment to provide adequate
wiring space. Contact your local Schneider Electric
representative for special requirements.
3. If the transformer requires a 94-inch high enclosure for a
switchgear line-up, or if a special enclosure is required,
contact your local Schneider Electric representative.
4. For 95 kV BIL, consult your local Schneider Electric
representative. (May affect dimensions.)
© 2011 Schneider Electric
All Rights Reserved