10 Finishing Schedule
PLEASE NOTE:
*Mercedes-Benz South Africa mandatory supplier: All items or materials with
*(asterisk) stated in supplier list should be ordered only by the specific
Mercedes-Benz South Africa listed supplier.
All items without asterisk are not mandatory, thus other supplier’s can be
utilised.
10.1 Main Entrances
AREA
FINISH
Floor
600x600 Mid grey polished porcelain tiles.
Charcoal grout to be used.
Feature line
600x300 Dark grey polished porcelain tiles.
600x300 Dark grey rough porcelain tiles.
Charcoal grout to be used.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Dividing strip
8mm x 12mm stainless steel square edge trim.
Portal walls and façade walls
ACM(Aluminium composite material) cladding, RAL 5011 Midnight blue.
Walk-off mat
External: Miliken Obex Prior Graphite (SERRA)
Internal: Miliken Obex Forma (SERRA)
Colour: Graphite Ammonite (RAL 7011) (SERRA)
Surround: Aluminium elite straight edge trim,5mm wide(AESE100)
Alternative: Star gripper plus, black with well and edge.
Metal sheeting to canopy top:
Brown built klip lock ‘chromadek’ sheet
Colour: Chromadek Dove grey.
(please note that colour reflects more silver than grey).
Entrance feature canopy underside:
4mm Nutec board smooth plaster finish.
Metal sheeting to eaves underside:
Brown built super clad, non perforated chromadek sheet.
Colour: Metallic silver paint (RAL 9006)
External generic steel columns:
Shaft:
Aluminium shopfonts/window/door:
Powder coated silver to match RAL 9006
Glazing:
As per area specific to SANS10400. To comply with solar regulations,
clear view into showroom.
Mild steel columns according to typical layout DWG:
Colour: RAL 5011 Midnight blue
Capitol head: Mild steel column heads according typical layout DWG:
Colour: Metallic silver paint (RAL 9006)
Base:
Brushed perforated stainless steel according to DWG
Perforation 5mm @ 15mm pitch. Down to paving level.
Sub-surface drainage only.
Steel to be galvanised.
1
Roof trusses
Steel I-beams and Channels to be spray painted to match RAL7011.
Fascias:
To be spray painted to match RAL 7011.
Purlins:
To be spray painted to match RAL 7011.
Louvres:
200 and 300 fins dove grey(white) steel structure to match RAL7011
Powder coated to match RAL 9006 silver.
2
10.2 Main Showroom
AREA
FINISH
Floor:
600x600 mid Natural porcelain tiles.
Charcoal grout
Dividing strip
8mm x 12mm stainless steel square edge trim.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Roof sheeting(Eaves):
Brown built klip lock, chromadek sheeting
Silver RAL 9006
Roof sheeting(Main):
IBR Chromadek Dove grey or brown built klip lock
Internal metal ceiling:
Brown built super clad, perforated chromadek sheet.
Colour: RAL9006 Metallic silver paint
Internal plastered ceiling finish:
White Plasterboard by Gyprox
Internal columns:
Concrete columns to drawings.
Colour governed to zone.
Beams and trusses:
Steel I-Beams and C-Channels to drawings.
Colour to match RAL 7011
Balustrades:
Safety glass to engineer.
Stainless steel clamps.
Stainless steel railings and uprights.
Aluminium window/door frames
Powder coated to match RAL 9006
Aircon/ventilation outlets:
Spray painted to match RAL 9006
External perimeter floor finish:
600x600 dark grey, rough porcelain tiles.
3
10.3 Highlight bay
AREA
FINISH
Floor:
600x600 light grey, polished porcelain tiles.
Charcoal grout
Dividing strip
8mm x 12mm stainless steel square edge trim.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
4
10.4 Customer lounge
AREA
FINISH
Floor
600x600 Mid grey polished porcelain tiles.
Charcoal grout to be used.
Feature line
600x300 Dark grey polished porcelain tiles.
600x300 Dark grey rough porcelain tiles.
Charcoal grout to be used.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Dividing strip
8mm x 12mm stainless steel square edge trim.
Lounge carpet:
3000mm diameter carpet
Keystone 7100
Colour: 358 Zinnia
5
10.5 Coffee bar/Bistro
AREA
FINISH
Floor(Behind counter)
600x600 Mid grey natural porcelain tiles.
Charcoal grout to be used.
Floor(Front of counter)
1850x140x14 Panda Bamboo FSWC18SL-O Strand woven caramel.
self locking
Bamboo flooring-oiled
Underlay:
Nostrakustik plus
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Skirting
Natural anodized aluminium skirting, 75mm high
Ceiling:
Bulkhead and surround white plasterboard by gyprox.
Doors
Maple veneer/Frosted glass 0.6mm door facing customers, powder
coated RAL 9006 aluminium frame.
External floors:
Nudek 150 x 23 x 5800 Chocolate
Please refer to installation guidelines document for correct installation.
6
10.6 Customer WC
AREA
FINISH
Floor:
600x600 mid grey Natural porcelain tiles. 3mm joints.
Charcoal grout to be used.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
General walls:
Feature walls:
600(l)x300(h) light grey porcelain tiles polished and natural.
600(l)x300(h) dark grey porcelain tiles polished and natural.
Skirting:
Feature wall skirting:
Adhesive:
Grout:
WB183.
100 (h)x600(l) mid grey porcelain Natural tiles. 3mm joints.
100(h)x600(l) dark grey porcelain tiles polished and natural. 3mm joints.
Weber Tylon fast set WB114 mixed with Weber Tylon Bond-it WB183.
Weber Tylon tile grout WB33, Charcoal mixed with Weber Tylon Bond-it
Ceilings
White Plasterboard by Gyprox
Vanity tops
face with 20mm thick
CaesarStone Quartz 20mm thick bathroom surface with 20mm
fascia 440mm high along all exposed edges, 45 degree mitred joint,
colour Grey (code: 2003), fixed to supports (elsewhere specified)
using dabs of 100% clear silicone adhesive at 200 to 300mm centres
along all supports with all joints filled with matching polyester resin
glue.
NOTE: 13mm (THICKNESS) CEASERSTONE TO BE UTILIZED WHEN
FIXED TO VERTICAL SOLID SUBSTRATE (MASONRY WALL).
Mirror
GSA SmartGlass™ Images® copper-free mirror, glazed in accordance
with NBR N schedule 1 and SABS 0137. Mirror to be fixed to
substructure with a hidden fasteners acc. to shopfitter.
Mirror substructure:
Frame:
Backing:
Bulkhead:
45x45mm Mild steel u-channel powdercoated matt black (colour to be
confirmed).
12mm thick Supawood plain and smooth surfaced interior grade wood
based Medium Density Fibreboard (M.D.F), constructed in accordance
with the drawings.
PG Bison 16mm thick Supaply in American Walnut, comprising of a
layer veneer (Solid Timber cut or sliced into thin sheets) bonded to both
sides a of high quality Supawood Medium Density Fibreboard (MDF)
using a thermosetting adhesive (UF) in a hot pressing operation
laminated on one side constructed in accordance with the
drawings with SA pine or aluminium substructure acc. to shopfitter.
30x17x3mm Custom mild steel u channel powdercoated matt black
(colour to be confirmed).
Cubicle glass door with ironmongery:
To be confirmed.
7
10.7 Offices & administration
1. Boardroom and Dealer Principal's office
AREA
FINISH
Floor
Keystone 7100, Masland Contract
Colour: 489 Thunder Cloud
Available from
Executive Commercial Flooring
Skirting
Natural anodized aluminium skirting, 75mm high
General walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-1
Internal shopfronts
Powdercoated silver RAL 9006 aluminium frames with clear safety
glass
Accent walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-6
Doors
Maple veneer or clear glass, aluminium framed powder coated silver
RAL 9006
2. FOH sales and service offices, enclosed offices & secondary meeting rooms
AREA
FINISH
Floor
500x500 charcoal with blue stripe carpet tiles,
FPS Airmaster A886 8508,
Product number: 5012171, Available from
Executive Commercial Flooring
Floor finish between sales
Offices and display area
1850x140x14 Panda Bamboo FSWC18SL-O Strand woven caramel.
self locking
Bamboo flooring-oiled
Underlay:
Nostrakustik plus
Dividing strip between
Bamboo and tiles.
Aluminium wood/laminate square end cover, 24mm
(code:ACSQ248)
Skirting
Natural anodized aluminium skirting, 75mm high
General walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-1
Internal shopfronts
Powdercoated silver RAL 9006 aluminium frames with clear safety
glass
Accent walls
Painted Prominent paints E29-6
Doors
Maple veneer or clear glass, aluminium framed powder coated silver
RAL 9006
8
3. BOH –admin offices (not visible to public)
AREA
FINISH
Floor
Van dyck
Florpoint
Earth raven
General walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Internal shopfronts
Powdercoated silver RAL 9006 aluminium frames with clear safety
glass
Accent walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Doors
Maple veneer or clear glass, aluminium framed powder coated silver
RAL 9006
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
4. Computer room, archive, not visible to public
AREA
FINISH
Floor
600x600 mid grey Natural tiles. Charcoal grout
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
General walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Internal shopfronts
Powdercoated silver RAL 9006 aluminium frames with clear safety
glass
Accent walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Doors
Maple veneer or clear glass, aluminium framed powder coated silver
RAL 9006
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
9
5.
Kitchenette
AREA
FINISH
Floor
600x600 mid grey Natural tiles.
Charcoal
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
Skirting
Natural anodized aluminium skirting, 75mm high
10.8 Enclosed pre-owned vehicle showroom
Showroom area
AREA
FINISH
Floor
600x600 Mid grey polished porcelain tiles.
Charcoal grout to be used.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Floor(highlight bay)
600x600 light grey, polished porcelain tiles.
Charcoal grout
Feature line
600x300 Dark grey polished porcelain tiles.
600x300 Dark grey rough porcelain tiles.
Charcoal grout to be used.
Dividing strip
8mm x 12mm stainless steel square edge trim.
Walk-off mat
External: Miliken Obex Prior Graphite (SERRA)
Internal: Miliken Obex Forma (SERRA)
Colour: Graphite Ammonite (RAL 7011) (SERRA)
Surround: Aluminium elite straight edge trim,5mm wide(AESE100)
Alternative: Star gripper plus, black with well and edge.
Floor finish between sales
Offices and display area
1850x140x14 Panda Bamboo FSWC18SL-O Strand woven caramel.
self locking
Bamboo flooring-oiled
Underlay:
Nostrakustik plus
Dividing strip between
Bamboo and tiles.
Aluminium wood/laminate square end cover, 24mm
(code:ACSQ248)
General walls:
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-1
Feature walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-6
10
External generic steel columns:
NOTE:
Shaft:
Mild steel columns according to typical layout DWG:
Colour: RAL 5011 Midnight blue
Capitol head: Mild steel column heads according typical layout DWG:
Colour: Metallic silver paint (RAL 9006)
Base:
Brushed perforated stainless steel according to DWG
Perforation 5mm @ 15mm pitch. Down to paving level.
Sub-surface drainage only.
Steel to be galvanised.
TO BE SPRAY-PAINTED ACC. TO AUTOMOBILE PAINT QUALITY.
QUALITY TO BE PRE-APPROVED BY Mercedes-Benz South Africa
as well as CONTROLLING ARCHITECTS.
Aluminium window/door frames:
Powder coated silver RAL9006
Glazing:
As per area specific to SANS10400. To comply with solar regulations,
clear view into showroom.
Roof trusses
Steel I-beams and Channels to be spray painted to match RAL7011.
Fascias:
To be spray painted to match RAL 7011.
Purlins:
To be spray painted to match RAL 7011.
Building perimeter:
600x600 Dark grey rough tiles.
11
10.9 Open pre-owned vehicle showroom
AREA
FINISH
Floor:
600x600 Dark grey,Rough porcelain tiles.
Charcoal grout
External generic steel columns:
Shaft:
Roof trusses:
Steel I-beams and C-channels according to DWG:
RAL 7011 Iron grey
Fascias:
RAL 7011 Iron grey
Purlins:
RAL 7011 Iron grey
Metal ceiling:
Brown built super clad, non perforated chromadek sheet.
Colour: Metallic silver paint (RAL 9006)
Roof structure:
I-beams and c-channels to design drawings or detail design truss
System, spray painted RAL7011
Roof sheeting(Eaves):
Brown built klip lock, chromadek sheeting
Colour: Dove grey to one side
Underside: Frost white, Fish eagle white
Roof sheeting (Main):
IBR Chromadek Dove grey or brown built klip lock
Mild steel columns according to typical layout DWG:
Colour: RAL 5011 Midnight blue
Capitol head: Mild steel column heads according typical layout DWG:
Colour: Metallic silver paint (RAL 9006)
Base:
Brushed perforated stainless steel according to DWG
Perforation 5mm @ 15mm pitch. Down to paving level.
Sub-surface drainage only.
Steel to be galvanised.
12
10.10 Service reception
Internal service reception
AREA
FINISH
General Field tile
600x600 mid grey Natural tiles.
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Walk-off mat
External: Miliken Obex Prior Graphite (SERRA)
Internal: Miliken Obex Forma (SERRA)
Colour: Graphite Ammonite (RAL 7011) (SERRA)
Surround: Aluminium elite straight edge trim,5mm wide(AESE100)
Alternative: Star gripper plus, black with well and edge.
Customer waiting floor:
1850x140x14 Panda Bamboo FSWC18SL-O Strand woven caramel.
self locking
Bamboo flooring-oiled
Underlay:
Nostrakustik plus
Skirting
Natural anodized aluminium skirting, 75mm high
General walls/high walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Accent walls/low walls (dirty areas)
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
Active service reception-vehicle reception
AREA
FINISH
Floor
Enclosed specification: Tile: 300x300 Italgraniti Opus, Rubrum, (rust).
Areas exposed to precipitation to have black 'rockface' porcelain tile of
1.2m strip minimum. Italgraniti "Indian black" code D0330 size 300x300
R10 anti-slip. External specification: 600x600 Dark grey Rough tiles.
3mm joint sizes
Charcoal grout to be used
Skirting
Natural anodized aluminium skirting, 75mm high
General walls/high walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Accent walls/low walls (dirty areas)
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Metal sheeting to ceiling underside
Brown built super clad, non perforated chromadek sheet
Colour: metallic silver paint RAL 9006
External facade
0.6mm corrugated sheeting. Zincalume, s-rib profile
Glazed roller shutter doors
Coroma door, Embossed to match metallic silver paint RAL 9006
13
Aluminium window/door frames:
Powder coated silver RAL9006
Active service reception-managers and admin
AREA
FINISH
Floor
600x600 mid grey Natural tiles. 3mm joints.
Charcoal grout
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
Skirting
Natural anodized aluminium skirting, 75mm high
General walls/high walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Accent walls/low walls (dirty areas)
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Aluminium window/door frames:
Powder coated silver RAL9006
Doors
Maple veneer or clear glass, aluminium framed powder coated silver
RAL 9006
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
14
10.11 Workshop
Workshop incl oil store, tool store, unit repair, etc
AREA
FINISH
Floor – circulation and workbays
a. Porcelein tiles: Rubrum matt 300x300 (colour: rust small speckle)
with indiana black border with M-trim aluminium movement joints
Soft joints not acceptable
Charcoal grout to be used:
b. Diamond ground floor (concrete mix by specialist), with 2 coats of
HTC stain resistant sealant as indicated on floor finishes drawing colour to match rubrum
Floor-border tile
Italgraniti "Indian black" code D0330 size 300x300 R10 anti-slip. No
soft edges acceptable
Walls and concrete columns above
Door height
Walls and concrete columns below
Door height
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Doors and architraves
General roller shutter doors
Coroma roller shutter, embossed to match Metallic silver paint
(RAL9006)
Columns
according to zones
Columnheads
Steel I-beams and C-channels according to Mercedes Generic
drawings.Colour: RAL 7011 Iron Grey
Aluminium window/door frames:
Powder coated silver RAL9006
Roof trusses
Steel I-beams and C-channels according to Mercedes Generic
Drawings
Colour: RAL 7011
External facade
0.6mm corrugated sheeting. Zincalume, s-rib profile
Ceiling
ISOVER Sagex Kulite EPS Thickness dependent on site specific
conditions acc. to specialist and building regulation with aluminium metal
coating located to the inside of the cavity with decorative white metal
coating to exterior exposed side, fixed with T.
Rainwater downpipes
Painted to match RAL 7011 Iron grey mild steel
To be galvanized.
15
10.12 Parts
Parts binning
AREA
FINISH
Floor
a. Diamond ground floor (concrete mix by specialist), with 2 coats of
HTC stain resistant sealant as indicated on floor finishes drawing colour to match rubrum
b. Rubberized flooring
Walls and concrete columns above
Door height
Walls and concrete columns below
Door height
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Doors and architraves
Powder coated. Doors to be maple veneer
General roller shutter doors
Coroma roller shutter, embossed to match Metallic silver paint
(RAL9006)
Columns
Zone specific
Columnheads
Steel I-beams and C-channels according to Mercedes Generic
drawings.Colour: RAL 7011 Iron Grey
Aluminium window/door frames:
Powder coated silver RAL9006
Roof trusses
Steel I-beams and C-channels according to Mercedes Generic
Drawings
Colour: RAL 7011
External facade
0.6mm corrugated sheeting. Zincalume, s-rib profile
Ceiling
Sagex Kulite EPS 30mm 16kg/cubic meter density aluminium foil
backing and white vinyl coating underside. White aluminium foil face
Rainwater downpipes
Painted to match RAL 7011 Iron grey mild steel
To be galvanized.
Parts office areas
AREA
FINISH
Floor
600x600 mid grey Natural tiles. 3mm joints.
Charcoal grout
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
16
Walls
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-3
Parts dispatch area below door height
Two coat plaster (rhinolite/ plaster skim)
Painted Prominent paints E29-5
Ceilings
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
Doors
FOH: Maple veneer or clear glass, aluminium framed powder coated
Silver RAL 9006
BOH: Charcoal Formica with stainless steel ironmongery to spec, door
frames - steel painted silver RAL 9006
Windows
Steel or aluminium windows painted / powdercoated to match Metallic
silver paint (RAL 9006)
Kitchen units
Dividing strip
Interglobal
8mm x 12mm stainless steel square edge trim.
Walk-off mat
External: Miliken Obex Prior Graphite (SERRA)
Internal: Miliken Obex Forma (SERRA)
Colour: Graphite Ammonite (RAL 7011) (SERRA)
Surround: Aluminium elite straight edge trim,5mm wide(AESE100)
Alternative: Star gripper plus, black with well and edge.
17
10.13 BACK OF HOUSE
Wash and valet areas
AREA
FINISH
Main Floor
a. Diamond ground floor (concrete mix by specialist), with 2 coats of
HTC stain resistant sealant as indicated on floor finishes.
b. BASF Mastertop 100 with sealant to manufacturers spec.
Ancillary Floor
300x300 Porcelein Italgraniti, Indian Black Code 0330, non-slip
Skirting/Splash back
Unitech Black NE900 200x200 (black)
Matt Ceramic, tiled to a height of 1200mm
Washbay walls above 1200mm
a. Unitech White BI901 200x200 (white)
matt ceramic tile
General walls:
Light grey
External facade:
grey
Concrete columns
As per zone
Roof trusses
Steel I-beams and C-channels according to Mercedes Generic
Colour: RAL 7011
Ceilings
office&kitchenette:
600x600 Acoustic drop in Gyprex white panels, resting inside
23mm White QRC tees (product code: T38V)
Plasterboard surrounds to minimize cutting of tiles
Guardhouse
AREA
FINISH
Floor
300x300 Porcelein Italgraniti, Indian Black Code 0330, non-slip
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
.
External walls
ACC cladding RAL 5011
Internal walls
Painted Prominent paints E29-3
Doors
Charcoal Formica with stainless steel ironmongery to spec, door
frames - steel painted silver RAL 9006
Ceilings
Masonite drop in panels
Plasterboard surrounds to minimize cutting of tiles
Back of house secure parking
AREA
FINISH
Carports
Steel hardcover carports, painted to match RAL7011
Site fencing and walls
a. 2.4m high Betafence, betaview with under deck/ground beam colour:
anthracite RAL 7021 or
b. 2.4m high plastered and painted brick wall refer to drawi
18
10.14 General
FOH Staircase
AREA
FINISH
Treads
Panda Bamboo FSWC18SL-O Strand woven caramel.
self locking
Bamboo flooring-oiled
Handrails
Hand rail 50dia stainless steel
Other steel components to be stainless steel
Safety Glass panels
Stainless steel holding clips
Paint finishes
AREA
FINISH
Beams and trusses
Steel I-beams and C-channels
Finish: RAL 7011 Iron grey
Mezzanine edge steel beam
RAL 9006 – spray application
External building walls
Painted Prominent paints E29-4
Air-conditioning
AREA
FINISH
Electrical switches, sockets
AREA
FINISH
Grilles & Louvers
AREA
FINISH
Eastern and Western facades
200 and 300 louvers, Dove grey
Substructure to be spray painted to match 7011
Vertical plinth details
AREA
FINISH
BOH and FOH
Italgraniti "Indian black" code D0330 size 300x300 R10
NOTE: ALL TILES TO BE PURGED WITH ACID AFTER INSTALLATION
19
Bollard specification
AREA
FINISH
Lighting bollard
Refer to national luminaire schedule
Removable bollard and fixed
Non illuminated bollards
Painted iron grey to match RAL 7011 Iron grey
Cap: stainless steel.
Paving
AREA
FINISH
FOH
Charcoal interlocking concrete paver with through colour &
Uneven texture (such as Grinaker LTD interlocking paver)
80mm on driveway and 60mm on parking bays
Parking bays to be identified with 60mm grey pavers
FOH display areas
100mm Grey technicrete grassframe paving
BOH
Grey interlocking concrete paver with through colour and
Uneven texture(such as Grinaker LTD interlocking paver0
80mm
20