miniport LED
Indoor/Outdoor
2"
(5cm)
Description:
Miniport LED is slim and can be recessed into a wall or floor using a Miniport
junction box, which mounts to an octagon box or outdoor, wet-location
electrical box. The fixture, with a 2.3 watt warm-white LED, features a 16
degree precise focus and tempered glass lens with a stainless steel, round
beveled edge trim.
Miniport is compatible with the TE-60L-12 power supply. Fixture includes 5 year
warranty.The Miniport Eyelid version, which should be wall-mounted 4" from
floor, includes LFMP-20D, a lens film to tilt the light beam 20 degrees.
2"
(5cm)
0.08"
(2mm)
0.32"
(8mm)
1.1"
(2.8cm)
1.1"
(2.8cm)
1.85"
(4.7cm)
1.85"
(4.7cm)
Standard Version
Eyelid Version
.08"
(.2cm)
Finish:
2"
(5cm)
1.85"
(4.6cm)
Stainless Steel
Lamp Specification:
2.3 Total Watts with driver, 12VAC LED, 300K, 82CRI, 47 lumens,
70% lumen maintenance based on 50,000 hours of operation
3"
(7.6cm)
1.5"
(3.8cm)
1.75"
Diameter
4.3"
(10.9cm)
Dimming Information:
Indoor Octagon Junction Box
supplied by electrician
Dims with electronic low-voltage dimmer
Power Supply:
60 watt, 120 volt input, 12 volt AC output TE-60L-12
Beam Angle
16°
TE-60L-12
DIST. FC
2'
60.3
4'
15.1
6'
6.7
8'
3.8
10'
2.4
12'
1.7
DIA.
7"
14"
20"
27"
34"
41"
DIA.
Wet location Round
Junction Box supplied by
electrician
DIA.
DIA.
Miniport Eyelid Step Lighting
Wall Mounting
4"
DIA.
Eyelid with
LFMP-20D, which
bends light 20°
for step lighting
LDIA.
lE
OF NGT
beamH
W
LENGTH FC WIDTH
3"
36.2
6"
6"
70.6
6.5"
9"
88.5
9"
12"
47.8
9.5"
EYE LID comes with 20°
Tilt Film #LFMP-20D
Step Mounting
L
4"
DIA.
W
width
OF
beam
DIA.
MiniPort with Eyelid
156
www.edgelighting.com
LENGTH FC WIDTH
3"
41
9.5"
6"
53.2
9.5"
9"
36
10"
12"
20
9"
EYE LID comes with 20°
Tilt Film #LFMP-20D &
Linear Spread Film#LFMPLS (order seperately)
YELLOW
hot (black)
120vAC
120vAC
electronic led
12 vac transformer
TE-60l-12
12vAC
miniport
WHITE
neutral (white)
electronic
low voltage
dimmer
MiniPort LED COMPONENTS
Use Miniport Indoor or Outdoor as an uplight or step light
with eyelid and lens film that refracts beam down 20 degrees.
Junction Box Cover Use indoor or outdoor.
Wall Floor Recessed
Product
MPOrt
MPORT Miniport
voltage
12vac
–
12VAC 12 Volt AC
trim
ST
–
ST Surface Trim
EL Eyelid
–
FINISH
Product
SS
MPort
SS Stainless Steel
MPORT Miniport
Power Supply (60W/12VAC) converts
standard 120 volt line voltage to 12
volts and features built-in short-circuit
protection. Fits inside an electrical
junction box.
20D
27K
25K
TE
TE Transformer
Electronic
–
60L
60L 60 Watt
LED and halogen
ND
JC
JC Junction Cover
BL
Film Lenses and Filters shape
beam, change color or adjust
color temperatures.
RD
VOLTAGE
TYPE
Product
TYPE
–
–
12
12 12 Volt, AC
type
Product
LFMP
LFMP Lens Film MiniPort
–
20D
20D Refracts beam 20° down
25K 2500K Very Warm White
27K 2700K Very Warm White
NDNeutral Density Filter dims 50%
RD Red Film
BL Blue Film
LS Linear Spread
www.edgelighting.com
157
port LED
Indoor/Outdoor
Hexcell Louver
Step Louver
Description:
Slim and recessed, with an integral 12VAC 3.5 watt, high-powered, warm
white LED, the fixture features a 16 degree precise focus, tempered glass
lens with a marine-grade aluminum, round or square, beveled edge trim.
The Port LED is outdoor-rated using a wet location electrical box or
indoor using a standard octagon electrical box. The trim accepts dichroic color
filters, which are used with PORT-LL(H). Compatible remote power supplies
are TE-60L-12, T-150-12 or T-300-12. Order junction box cover, wood spring
clips and remote transformer separately. Fixture includes 5 year warranty.
2.25"
(5.7cm)
1.1"
(2.8cm)
0.13"
(3.3mm)
Silicone
Ring Seal
3.5"
(8.9cm)
2"
Diameter
Finish:Power Supply:
Satin Aluminum
TE-60L-12, T-150-12 and T-300-12
3.51 Total Watts, 12VAC LED, 3029K, 80CRI, 95 lumens,
70% lumen maintenance based on 50,000 hours of operation.
Add a warming filter to bring the color to 2500K
DIA.
Can dim down to 30% without flickering using a low voltage electronic or
magnetic dimmer.
DIA.
Step Lighting with
PORT-LL Accessory
Bends light 20° to illuminate step.
Wall Mounting
4"
4 inches
DIA.
L
20° TILT
DIA.
40 FC
lE
OF NGT
beamH
W
LENGTH FC WIDTH
3"
36
3"
12"
167
4"
21"
35
8"
30"
14
10"
39"
7
12"
48"
4
13"
PORT with LF1-20D and
Micro Louver
Step Mounting
L
4"
DIA.
W
width
OF
beam
DIA.
2010 AWARD
158
www.edgelighting.com
LENGTH FC WIDTH
3"
44
7.5"
6"
85
10"
9"
84
10.5"
12"
34
12.5"
PORT with LF1-20D,
LF1-LS and Micro Louver
1.5"
(3.8cm)
4.3"
(11cm)
Indoor Octagon
Junction Box Supplied
by Electrician
Beam Angle
16°
Lamp Specification:
Dimming Information:
4"
(10.2cm)
Wet location Round Junction Box
Supplied by Electrician
DIST. FC
24"
328
48"
91
72"
40
96"
22
120"
14
144"
10
DIA.
5"
10"
14"
17"
26"
28"
DIA.
port
+
120v hot
(black)
12vac remote
power supply
120v
120v neutral
(white)
12vac
Port LED COMPONENTS
Use the Port LED indoor or outdoor as a general uplight
or step light.
Product
PORT Port
TYPE
DESCRIPTION
HD
–
RD
–
RD
SQ
HD Head Only
trim
ST
–
ST Surface Trim
Round
Square –
FINISH
Product
SA
Port
SASatin
Aluminum
–
PORT Port
Spring Clip Use to recess into
outdoor wooden steps or decks
without junction box.
TYPE
Product
JC
SC
JC Junction Cover
20D
SC Spring Clip
ND
Dichroic Film Lenses
and Filters shape beam,
change color or adjust color
temperatures. Louver Lens
Holder PORT-LLH required.
20K
Product
Port –
LL
LLH
Port
RD
TYPE
Product
LL
LF1
LO11
TYPE
–
LF1 Lens Film 1" diameter
LO11 MR11 (use only with Hexcell)
1" Step Louver with 20° Beam Tilt Lens, Neutral Density Filter, Linear Spread Lens
Louver Lens Holder only
20D
20D Refracts beam 20° down
20K Dichroic 2000K Very Warm White
27K Dichroic 2000K + Color Correction Film = 2700K Warm White
NDNeutral Density Filter dims 50%
RD Dichroic Red Film
BL Dichroic Blue Film
LS Linear Spread
H
Hexcell
Remote Transformer
The 150 or 300 watt 12VAC
magnetic remote mount
transformers convert 120V into
12V power and are protected by
fast-acting circuit breakers. Dims
with Lutron Diva or Skylark low
voltage dimmer.
Power Supply (60W/12VAC)
converts standard 120 volt line
voltage to 12 volts and features builtin short-circuit protection. Fits inside
an electrical junction box. Minimum
dimming load is 6 watts. Dims with
Lutron Diva or Skylark electronic low
voltage dimmer.
Product
TE
TE Transformer
Electronic
TYPE
–
60L
60L 60 Watt
LED and halogen
–
VOLTAGE
Product
12
T
12 12 Volt, AC
WO Wood
BL
Lenses and Louver Complete
with 20° Beam Tilt lens and Step
Louver to use as step light, plus
a neutral density filter.
port
TYPE
WO
–
Wall Floor Recessed
POrt
Junction Box Cover Use indoor
or outdoor.
T Remote Transformer
Power
–
150
150 150 Watt
300 300 Watt
Voltage/output
–
12
12 12 Volt
Voltage Input
–
Standard 120V
(leave blank)
2 230V 50Hz
3 277V 60Hz
www.edgelighting.com
Type
–
Standard Indoor
(leave blank)
O Outdoor
159
sUN 3 LED
Indoor/Outdoor
Description:
The 3" round or square recessed SUN3 LED features a 16,
23, 36 or 47 degree precise focus, tempered glass lens with a
marine-grade aluminum beveled edge trim. It is outdoor-rated
using a wet location electrical box or indoor using a standard
octagon electrical box. The trim accepts dichroic color filters
which are used with SUN3-LL(H). Order junction box cover,
wood spring clips and remote transformer separately. Fixture
includes 5 year warranty.
Finish:
Satin Aluminum
Lamp Specification:
6.5W, 281 Lumens, 42 Lumens per
Watt, 12VAC LED, 2968K, 80CRI
0.13"
(3.3mm)
Beam Angle
16°
1.75"
(4.45cm)
3.43"
(8.7cm)
DIA.
7"
10"
14"
20"
27"
34"
DIST. FC
2'
404
3'
180
4'
101
6'
45
8'
25
10'
16
2.8"
Diameter
3.25"
(8.25cm)
3.85"
(9.78cm)
1.5"
(3.8cm)
Power Supply:
TE-60L-12 and T-150-12
T-300-12
DIST. FC
2'
775
3'
346
4'
194
6'
86
8'
49
10'
32
4.3"
(10.9cm)
Indoor Octagon Junction
Box Supplied by Electrician
Junction Box
Supplied by Electrician
DIST. FC
2'
184
3'
82
4'
46
6'
20
8'
12
10'
7
Beam Angle
23°
DIA.
10"
15"
20"
29"
39"
49"
DIA.
DIA.
DIA.
Beam Angle
36°
Beam Angle
47°
DIA.
16"
23"
31"
47"
62"
78"
DIA.
DIST.
2'
3'
4'
6'
8'
10'
FC
96
43
24
11
6
4
DIA.
21"
31"
42"
63"
84"
104"
Dimming Information:
Dims down to 9% without flickering using low voltage electronic
or magnetic dimmer.
Step Lighting with SUN3-LL Accessory
Bends light 20° to illuminate step.
DIA.
L
lE
OF NGT
beamH
20° TILT
194 FC
DIA.
w/opposite w/opposite
wall white wall black
4"
4 inches
DIA.
DIA.
Wall Mounting
W
LENGTH FC
FC
WIDTH
3"
370
369
2"
12"
194
192
3.5"
21"
12
12
7"
30"
3
2.6
13"
39"
2
0.9
14"
48"
5.7
0.7
18.5"
SUN3-HDL1 with LF2-20D and
Micro Louver
L
4"
DIA.
W
width
OF
beam
Step Mounting
20
AL
IGN JOUR
DES
N
11
2011 award
DIA.
2010 award
2011 award
160
www.edgelighting.com
LENGTH FC WIDTH
3"
159
8"
6"
182
11.5"
9"
116
11.5"
12"
49
12.3"
SUN3-HDL1 with LF2-20D,
LF2-LS and Micro Louver
120V Hot
(black)
sun 3
+
12vac remote
power supply
120V
­12v ac
120V neutral
(white)
Sun3 LED COMPONENTs
Use the SUN3 LED indoor or outdoor as a general uplight
or step light.
HEAD/ LENS
Sun3 –
SUN3 Sun3 hdl1
HDL1
HDL2
HDL3
HDL4
Color
Temperature
DESCRIPTION
RD
–
RD Round
SQSquare
16 Degree
23 Degree
36 Degree
47 Degree
WW
–
WW Warm White
–
FINISH
Product
SA
Sun3
SA Satin
Aluminum
–
SUN3 Sun3
Spring Clip Use to recess
into wood steps, decks etc.
without junction box.
TYPE
Product
JC
SC
ND
BL
Lenses and Louver Complete
with 20° Beam Tilt lens and Step
Louver to use as step light, plus
a neutral density filter.
Film Lenses and Filters
shape beam, change
color or adjust color
temperatures. Louver lens
holder SUN3-LLH required.
20K
Product
Sun3
–
SUN3 Sun3
LL
LLH
RD
TYPE
Product
LL
LF2
LO16-H
TYPE
–
LF2 Lens Film 2" diameter
LO16 MR16 (use only with Hexcell)
2" Step Louver with 20° Beam Tilt Lens, Neutral Density Filter, Linear Spread Lens
Louver Lens Holder only
20D
20D Refracts beam 20° down
20K Dichroic 2000K Very Warm White
27K Dichroic 2000K + Color Correction Film = 2700K Warm White
NDNeutral Density Filter dims 50%
RD Dichroic Red Film
BL Dichroic Blue Film
LS Linear Spread
H
Hexcell
Power Supply (60W/12VAC)
converts standard 120 volt line
voltage to 12 volts and features builtin short-circuit protection. Fits inside
an electrical junction box. Minimum
dimming load is 6 watts. Dims with
Lutron Diva or Skylark electronic low
voltage dimmer.
Product
TE
TE Transformer
Electronic
TYPE
–
60L
60L 60 Watt
LED and halogen
–
WO
WO Wood
SC Spring Clip
JC Junction Cover
20D
TYPE
–
Wall Floor Recessed
Product
Junction Box Cover Use
indoor or outdoor.
Remote Transformer
The 150 or 300 watt 12VAC
magnetic remote mount
transformers convert 120V into
12V power and are protected by
fast-acting circuit breakers. Dims
with Lutron Diva or Skylark low
voltage dimmer.
VOLTAGE
Product
12
T
12 12 Volt, AC
T Remote
Transformer
Power
–
150
150 150 Watt
300 300 Watt
Voltage/output
–
12
12 12 Volt
Voltage Input
–
Standard 120V
(leave blank)
2 230V 50Hz
3 277V 60Hz
www.edgelighting.com
Type
–
Standard Indoor
(leave blank)
O Outdoor
161
ED HOUSING
FRONT
SIDE
BACK
Step Halogen & LED
ND FOR 16” - 24” (41 - 61cm)
R STUD SPACING
5.62”
14cm)
Recessed Housing*
Plaster Screen*
Flange*
3.21”
(8cm)
FRONT
SIDE
BACK
FRONT
SIDE
BACK
61cm)
TOP VIEW
3.15"
(8cm)
3.21”
(8cm)
Wall (cut hole)
PLASTER SCREEN
(HOUSING COVER)
Step
3.15"
(8cm)
7.47”
(19cm)
2.5"
(6.4cm)
1.13"
(3cm)
Transformer
*not used when installing in furniture, stairs, or mirrors
PLASTER SCREEN
(HOUSING COVER)
7.47”
(19cm)
Step wall recessed fixture features a scoop reflector and is perfect for stairs or walls.
Halogen Step KIT includes: H1M Step (master) new construction housing, plaster screen,
10 watt 12 volt G4 bipin base halogen JC lamp, and a 60 watt electronic transformer that
powers up to 5 H1S (slaves), which do not include transformers. LED L1M Step (master)
includes, a 2 watt lamp and 60 watt LED transformer that powers up to 25 LED L1S
(slaves). All LED fixtures include 5 year warranty.
Satin Aluminum or White
Body Finish
Lamp
Specification
HALOGEN (H1) (lamp included) LED (L1) (lamp included)
H1 - Jc-MS/g4/10W
L1 - 3000K, 80 CRI, 79 lumens
total wattage
H1M - 10W
H1S - 10W
H1 - Low Voltage Electronic L1 - Low Voltage Electronic
Dimmer
Description
lamp
Finish
VOltage
KIT
H1M
sA
Standard 120V
(leave blank)
step
Ordering
code
L1M - 3.8W (with 60W power supply)
L1S - 2.2W (without power supply)
KIT
Housing &
Fixture
H1MHalogen Master
H1S Halogen Slave
L1M LED Master
L1S LED Slave
SA Satin Aluminum 2 230V 50Hz
WHWhite
Frame
Recessed Housing*
Plaster Screen*
Flange*
FRONT
SIDE
BACK
Wall (cut hole)
3.5"
(9cm)
Frame
3.5"
(9cm)
2.5"
(6cm)
1.25"
(3.2cm)
Metal Housing (screw to studs)*
Plaster Screen*
Flange*
Transformer
*not used when installing in furniture, stairs, or mirrors
RECESSED HOUSING
PLASTER SCREEN
(HOUSING COVER)
Wall (cut hole)
Frame wall recessed fixture is perfect for furniture, wall and mirror
3.21”
(8cm)
3.19”with a frost white diffuser.
installations. The fixture features a silver finish
(8cm)
Frame KIT includes Frame, new construction housing, plaster screen,
electronic transformer and 20 watt 12 volt G4 bipin base halogen JC lamp.
General light distribution. ADA compliant.
Body Finish
7.47”
(19cm)
Silver
Lamp
Specification
HALOGEN (H) (lamp included)
H1 - JC/G4/20W
total wattage
H1 - 20W
6.69”
(17cm)
Dimmer
Ordering
code
Low Voltage Electronic
7.47”
(19cm)
6.69”
(17cm)
Transformer
*not used when installing in furniture, stairs, or mirrors
Description
lamp
VOltage
KIT
H1
Standard 120V
(leave blank)
frame
KIT
162
Frame
Housing &
Fixture
H1 Halogen
www.edgelighting.com
2 230V 50Hz
Vision 3
Wall (cut hole)*
PLASTER SCREEN
(HOUSING COVER)
SIDE
RECESSED HOUSING
FRONT
3.25”
(8cm)
5.75"
(15cm)
3”
(8cm)
Plaster Screen*
9.125"
(23cm)
3.5"
(9cm)
3.5" 9”
(9cm)
(23cm)
9”
(23cm)
Metal Housing (screw to studs)*
Vision 3
3"
(8cm)
*not required when installing in furniture
PLASTER SCREEN
(HOUSING COVER)
RECESSED HOUSING
6.75”
(17cm)
3.25”
(8cm)
Transformer*
6.75”
(17cm)
3”
(8cm)
Vision 3 square wall recessed fixture is perfect for walls and furniture.
Inverse scoop reflector and body in silver finish. Vision 3 KIT includes Vision
3, housing, plaster screen, electronic transformer and 20 watt 12 volt G4
bipin base halogen JC lamp. General light distribution.
9”
(23cm)
9”
(23cm) Silver
Body Finish
HALOGEN (H) (lamp included)
H1 - Jc/g4/20W
Lamp
Specification
6.75”
(17cm)
6.75”
total wattage
H1 - (17cm)
20W
H1 - Low Voltage Electronic
Dimmer
Description
lamp
VOltage
KIT
H1
Standard 120V
(leave blank)
vision3
KIT
Housing &
Fixture
H1 Halogen
Wall Floor Recessed
Ordering
code
2 230V 50Hz
Vision 8
RECESSED HOUSING
PLASTER SCREEN
(HOUSING COVER)
3.25”
(8cm)
2.75”
(7cm)
FRONT
Wall (cut hole)*
5.75"
(14.5cm)
SIDE
Metal Housing (screw to studs)*
Plaster Screen*
15.75"
(38cm)
15.25"
(38cm)
15”
15”
(38cm)
9.25"
(38cm)
(23.5cm)
Vision 8
Transformer
6.75”
3.25"
(17cm)
6.75”
2.75"
(17cm)
(8cm)
(7cm)
RECESSED HOUSING
3.25”
(8cm)
PLASTER SCREEN
(HOUSING COVER)
Vision 8 rectangular wall recessed fixture is perfect for walls and furniture.
2.75”
Inverse scoop reflector and
(7cm)body in silver finish. Vision 8 KIT includes Vision 8,
housing, plaster screen, electronic transformer and 20 watt 12 volt G4 bipin base
halogen JC lamp. General light distribution.
Body Finish
15”
(38cm)
*not required when installing in furniture
Silver
Lamp
Specification
HALOGEN (H) (lamp included)
H1 - Jc/g4/20W
total wattage
H1 - 20W
15”
(38cm)
Dimmer
6.75”
Ordering
(17cm)
code
H1 - Low Voltage Electronic
Description
lamp
VOltage
KIT
H1
Standard 120V
(leave blank)
6.75”
vision8(17cm)
KIT
Housing &
Fixture
H1 Halogen
2 230V 50Hz
www.edgelighting.com
163