DISCONTINUED 08/31/15

advertisement
ICEAL SERIES
Induction Area Light
ICEAL1
EXAMPLE
ICE AL1
-
150S
t
-
t
SERIES
LAMP
41K
-
FLD/CG1
t
-
t
COLOR
TEMPERATURE
DISTRIBUTION/
LENS
SM
t
MOUNTING
-
08
/3
1/
15
SPECIFICATIONS
OP TIONS
ORDERING INFORMATION
Wet location listed, the ICEAL Series
utilizes a fully enclosed and gasketed
die-cast aluminum housing keeping
unwanted elements out, while ensuring
optimal thermal control in higher ambient
environments. Reflector and lens
selection determines light distribution.
•• This fixture is proudly made in the USA.
SERIES
ICEAL1
N
TI
35K
41K
50K
DISTRIBUTION (Must specify with Lens)
BAT/
FLD/
T3D/
O
D
IS
C
Bottom View
15-1/4”
WM
CPG
CPL
DPL
MPG
PPL
Clear tempered glass, 3/16” thick
(standard)
Clear prismatic tempered glass
(FLD/ only)
Clear polycarbonate
Drop polycarbonate (BAT/ only)
Micro-prismatic tempered glass
Prismatic polycarbonate (FLD/ only)
t
VOLTAGE
Surface mount plate
Power hook
Pendant mount/specify length in
inches
Power hook with pendant mount/
specify length in inches
Wall mount (T3D/ distribution only)
OPTIONS
FVS
WG
F lush mounted polycarbonate
vandal shield, .188” thick (not
available with DPL)
Wireguard
FINISH OPTIONS (Must specify)
BLK
DBR
GRAY
GRN
SLV
WHT
RAL#____
LENS (Must specify with Distribution)
CG1
UNV
Black (RAL #9004)
Dark bronze (Protech #PC21462)
S tandard gray (Protech #PC18367)
Green (RAL #6005)
S atin aluminum (RAL #9006)
W hite (RAL #9003)
Specify custom color
VOLTAGE (Must specify)
UNV
480
120-277V (standard)
480V (integral stepdown
transformer)
150S system consists of an ICETRON 100/2P/ECO lamp and
a QT 1x150 ICE/UNV-T ballast.
SPECIFICATIONS
± 75 fc.
6
11
18
± 100 fc.
7
15
24
Calculations based on standard reflectance of 80/50/20 and a light
loss factor of 1.0 with a 15’-0” ceiling height.
| Area Lights
PPH/__
1
QUANTITY ESTIMATOR
438
Batwing
Flood 6 x 6
Type III (Wall mount only)
11-1/8”
Weight: 31 Lbs.
Item #: ICEAL1-150S-FLD/CG1
Room Size
± 50 fc.
30’ x 30’ (900 sq. ft.)
4
40’ x 40’ (1,600 sq. ft.)
7
50’ x 50’ (2,500 sq. ft.)
12
SM
PH
PM/__
70-watt, 6815 lumens
100-watt, 8600 lumens
150-watt, 11900 lumens 2
3500K
4100K
5000K
-
MOUNTING (Must specify)
Induction Area Light–
Internal Ballast
LAMP COLOR TEMPERATURE (Must specify)
19-3/16”
FINISH
OPTIONS
LAMP (Must specify)
70
100
150S 2 G R AY
t
OPTIONS
N
U
ED
ICEAL SERIES
-
t
•• Housing – Fully enclosed, .125” thick, 100%
recycled, die-cast aluminum fixture and ballast
housing with premium silicone gasketing.
•• Reflector – 95% reflective highly specular
aluminum.
•• Shielding – Clear tempered glass lens (CG1).
•• Finish – Super durable polyester powder
coat bonded to phosphate-free, multi-stage
pretreated metal, meets and exceeds AAMA 2604
specifications for outdoor durability.
•• Electrical – Electronic 120-277V ballast standard.
Prewired at factory for easy field installation.
•• Mounting – For mounting options, see page 573.
•• Labels & Certifications – cCSAus listed as
suitable for wet locations and Marine Outside
Type. NEMA 4X. IP66 certified.2
2
Door and ballast housing must be torqued to manufacturer’s
specifications. Component failure due to contaminant
intrusion through the primary entry is not covered under
warranty.
LGV31214.010314MP Information contained herein is subject to change without notice.
Download