Innovative. Integrated. Simple.
Energy Saving Lighting Controls
Hubbell Building Automation
Innovative. Integrated. Simple.
Energy-Saving Lighting Controls
Hubbell Building Automation is a strong proponent of innovative, integrated energy-saving lighting controls. Our advanced wired and wireless
distributed intelligent lighting controls provide a complete suite of energy-saving solutions. We offer the most comprehensive line of occupancy &
vacancy sensors on the market. HBA products provide a simple way for you to meet the latest energy efficiency codes and standards, and all come
with a five-year limited warranty.
Technology & Quality are our Heritage
In 1896, Harvey Hubbell invented the world’s very first lighting control device--the pull chain switch. Over a century later, the company that
bears his name continues his legacy of innovation. From the industry’s first self-adaptive occupancy sensor to today’s advanced wired and wireless
distributed intelligent lighting controls, we continue to set the standard for applying technology to the business of controlling light and saving
energy. Future-proof smart devices and systems make for easy “install and forget” operation.
Energy-Saving Solutions
Let us help you get control of your energy costs. Our solutions provide a range of energy-saving strategies and technologies. Optimal lighting
control for your application is here--simple occupancy sensing, daylight harvesting, time-based scheduling or complete networked solutions.
Money-Saving Convenience
With our lighting control solutions, you will never have to think about turning out the lights again. Rest assured that with our solutions, the lights
will be on when required and off when not required. Wireless controls allow for individual fixture control without needing to know how the circuit
is wired or having to pull more wires to each fixture location. You get convenience, energy savings and peace of mind.
Table of Contents
NXTM Distributed Lighting Controls126
NXRC128
NXBTR129
NXDS130
NXOS131
NXSW132
NXP133
NXHNB134
NXAC-120135
wiSCAPETM Wireless Lighting Controls136
WIR-GATEWAY137
WIR-RME/WIR-RML138
WIR-MOD-GPRS139
WIR-SS140
DLCPCO141
Dimming WASPTM Occupancy Sensors142
WSP143
CXTM Lighting Control Panels with Dimming 144
CX145
CXDIMCONTRBD146
CXR147
LightHAWK®2 Vacancy/Occupancy Controls148
LHMTDS/LHMTD149
LHUSS/LHUSD150
LHIRS/LHIRD151
LHD-IRS152
LHN-IRS1153
125
DISTRIBUTED LIGHTING CONTROLS
NXTM Distributed Lighting Controls
SCALABLE CONTROL SIMPLIFIED
The NX Room Controller is an intelligent lighting control that simplifies installation with auto-configuration and provides energy-code
compliance right out of the box.
The NX Room Controller integrates automatic and manual control of lighting. Auto-configuration provides an easy and affordable way to
meet energy codes, including California’s Title 24 and ASHRAE 90.1. No network or software is required to set up the unit. Users benefit from
intuitive energy-saving control over the lighting in their space.
Input devices such as digital wall switches, vacancy/occupancy sensors and daylight sensors plug into the NX Room Controller and are
auto-configured to default operations. Plug-and-play has never been easier. All device communication is over standard CAT5 cables that
simplifies installation and eliminates wiring errors.
More advanced configuration of dimming and daylight functions can be accomplished using a free smart phone app. Through an optional
Bluetooth® module, the NX Room Controller connects directly to both Android™ and iOS® devices. All of these features add up to efficient,
trouble free installation and commissioning.
Used as a stand-alone device, the room controller is perfect for spaces that require room-level lighting control, such as classrooms and
personal offices. Up to eight NX Room Controllers can be connected. The self-contained intelligent device becomes the hub of an advanced
distributed lighting control platform.
KEY FEATURES
• Digital SmartPORTTM technology provides auto-configuration of switches and sensors
• RJ45 connectivity eliminates field wiring errors and simplifies installation
• Integral push-buttons and LED indicators aid in installation and troubleshooting
• Compact housing provides up to two relays and two dimming channels
• Connect up to 8 NX Room Controllers for a total of 16 loads
• Installs in the plenum above the controlled area eliminating home run wiring
126
1
NX ROOM CONTROLLER
The NX Room Controller is
providing switching and 0 - 10V
dimming control for the room’s
2 lighting zones.
4
NX OCCUPANCY SENSOR
NX DAYLIGHT SENSOR
The NX Dual Technology Occupancy
Sensor is monitoring the occupancy
of the room. Each load is configured
to operate in vacancy (manual on)
mode and automatically turns off
lighting once all occupants have left
the space.
The NX Daylight Sensor is
providing continuous dimming
of the fixtures in response to
the amount of natural light
entering the room.
DISTRIBUTED LIGHTING CONTROLS
3
2
5
6
NX PLUG LOAD CONTROLLER
The NX Plug Load Control
Module automatically turns off
non essential equipment that is
plugged into a controlled
receptacle when the room is
unoccupied.
NX DIGITAL SMART
SWITCHES
The NX 2 button Smart Switch
is providing on and off control
for the room’s 2 lighting zones.
1
NXTM Room Controller - Used individually or in combinations, the room controller is the central component in the NX room control solution. It
contains either one or two independently controlled relays. Dimming versions are available that provide one or two 0 - 10VDC control signal
outputs for full range control of dimmable ballasts and LED drivers. The NX Room Controller features SmartPORTTM technology that provides
auto-configuration of occupancy sensors and manual control switches. When devices are plugged into the SmartPORT, the room controller
automatically and intelligently responds to the devices to provide the most energy efficient operation.
2
Wiring - All device communication is over standard CAT5 patch cables which simplifies installation and eliminates wiring errors.
3
NX Ceiling and Wall Mount Vacancy / Occupancy Sensors - Sensors employ Dual Technology, Passive Infrared (PIR) and Ultrasonic (US) sensing
technologies to control lighting based on occupancy. Each load can be individually set to operate either in occupancy (auto on) or vacancy
(manual on) mode. These sensors employ patented IntelliDAPT® technology to eliminate sensor commissioning and prevent false-offs.
4
NX Daylight Sensor - Using a photodiode element, the daylight sensor continuously measures daylight levels and sends the information to the
NX Room Controller which then performs daylight switching or dimming functionality based on the amount of natural light in the area. The
system provides a self calibration feature to facilitate installation and can be configured to comply with specific requirements.
5
NX Smart Switches - Provide manual control of the NX System with station choices of 1 - 6 buttons. Each button has
an LED status indicator and can be configured to control individual loads or groups of loads. Up to eight stations can
be connected in series to one SmartPORT on a NX Room Controller. The attractive decorator style form factor allows
ganging and use of standard decorator style wall plates.
6
NX Plug Load Control Module - specially designed to stand up to the rigors of controlling all kinds of plug-in loads, the
dedicated NX Plug Load Control Module connects into a SmartPORT and automatically tracks the occupancy state of
the room and turns off non essential equipment when the room is unoccupied. Meets ASHRAE 90.1 requirements for
control of plug loads out of the box.
The NX Room Controller Bluetooth® Radio and Smart Phone App allows for more advanced configurations of dimming and daylight
functions. The free App is available for both AndroidTM and IOS®.
127
NXRC
NXTM Room Controller
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• Single or dual relay versions for On/Off or High/Low control
• Suitable for use with controlled receptacles
• Optional 0 – 10V interface for full range dimming control
• Auto config support for NX Occupancy Sensors, Daylight Sensors and Smart Switch
Stations
• Advanced configuration with NXBTR Bluetooth® Radio Module and smart phone app
• Device intelligently and automatically responds to sensors and switches in the most
energy- efficient manner
• Schedules are held in the devices (requires optional network connection)
• Retains data during power outages
• UL Listed
• Five-year limited warranty
ORDERING INFORMATION
NXRC
NXRC
128
MODEL
Room Controller
1R
1RD
2R
2RD
OUTPUT
1 SPST Switched Output
1 SPST Switched, 1 0-10VDC Dimming Output
2 SPST Switched Outputs
2 SPST Switched, 2 0-10VDC Dimming Outputs
UNV
INPUT VOLTAGE
120/277/347VAC
NXBTR
NXTM Bluetooth Radio Module
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• Simple plug in connection to RJ45 port on Room Controller or Smart Switch
• Self powered from the SmartPORTTM
• LED status indicates successful connection
• Easily pairs with smart phone
• Bidirectional communication for set up of lighting control functions
• Five-year limited warranty
ORDERING INFORMATION
NXBTR
NXBTR
MODEL
Bluetooth Radio
Module
129
NXDS
NXTM Daylight Sensor
DISTRIBUTED LIGHTING CONTROLS
FEATURES
•
•
•
•
•
•
•
•
ORDERING INFORMATION
NXDS
NXDS-O
130
MODEL / DESCRIPTION
Daylight Sensor
Daylight Sensor for Outdoors
Indoor and Outdoor models available
Architecturally attractive design
Open loop operation
Foot-candle range: 3-6,000fc
Mounts vertically or horizontally
Color coded, plug-and-play integration with NX Room Controller
UL and cUL listed
Five-year limited warranty
NXOS
NXTM Occupancy Sensors
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• IntelliDAPT® self-adaptive technology – no manual adjustment required
• All-digital sensor
• Non-volatile memory for sensor settings
• 500 to 2,000 square-foot coverage area (based on model)
• Plug and play integration with NX Room Controller
• UL and cUL listed
• Five-year limited warranty
ORDERING INFORMATION
NXOS
MODEL
NXOS
OMNIDT1
OMNIDT2
OMUS1
OMUS2
OMIRL
OMIR
LODT
LOIRWV
SENSOR TYPE
Ceiling mount, PIR and Ultrasonic, 1000 Sq. Ft.
Ceiling mount, PIR and Ultrasonic, 2000 Sq. Ft.
Ceiling mount, Ultrasonic, 1000 Sq. Ft.
Ceiling mount, Ultrasonic, 2000 Sq. Ft.
Ceiling mount, PIR, extended range 1500 Sq. Ft.
Ceiling mount, PIR, high density, 450 Sq. Ft.
Wall mount, PIR and Ultrasonic, 1600 Sq. Ft.
Wall mount, PIR, 2500 Sq. Ft.
131
NXSW
NXTM Smart Switches
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• Attractive, architecturally-pleasing decorator style design
• Gang-able with other decorator type devices
• Up to six buttons in a single gang
• Plug and play integration with NX Room Controllers
• Five-year limited warranty
ORDERING INFORMATION SMART SWITCHES
NXSW
MODEL
NXSW
SWITCH TYPE
1
2
3
4
6
1
2
3
4
6
Toggle button
Toggle buttons
Toggle buttons
Toggle buttons
Toggle buttons
COLOR
WH
IV
LA
GY
BK
White
Ivory
Light Almond
Gray
Black
ORDERING INFORMATION SPECIALTY SWITCHES
NXSW
MODEL
NXSW
SWITCH TYPE
OO
ORLO
RL
TO
SS
On/Off Switch
On/Raise/Lower/Off Switch
Raise/Lower Switch
Timed On Switch
Scene Switch
ORDERING INFORMATION SPECIALTY SWITCHES CAT5 SYSTEM CABLES
MODEL/DESCRIPTION
132
CAT5-3F-OR
CAT5 Cable for NX Smart Port Devices, Plenum Rated, 3ft, Orange
CAT5-10F-OR
CAT5 Cable for NX Smart Port Devices, Plenum Rated, 10ft, Orange
CAT5-25F-OR
CAT5 Cable for NX Smart Port Devices, Plenum Rated, 25ft, Orange
CAT5-50F-OR
CAT5 Cable for NX Smart Port Devices, Plenum Rated, 50ft, Orange
CAT5-100F-OR
CAT5 Cable for NX Smart Port Devices, Plenum Rated, 100ft, Orange
COLOR
WH
LA
GY
White
Light Almond
Gray
NXP
NXTM Panels
DISTRIBUTED LIGHTING CONTROLS
FEATURES
•
•
Four Relay panel sizes – 8, 16/24, 32, and 48 relay spaces
Standard Relay - 30A/1P latching (18K SCCR)
Optional Relays – 20A/2P N/O, 2A/2P N/C (14K SSCR)
• Multi-channel, 0 - 10V dimming option
• Astronomical and real time clock
• Downloadable schedules run in each panel
• Web browser user interface served from NX Area Controller
• High speed Ethernet compatible network
• Programmable dry contact auxiliary inputs and outputs
• Optional digital switch inputs via NX SmartPORTTM Module
• Programmable dry contact inputs accept low voltage switches, photocells or
motion sensors
• Listed to UL916, UL924 and cUL
• Five-year limited warranty
ORDERING INFORMATION
NXP08 - 2* - 083L
NXP16 - 2* - 163L
NXP24 - 2* - 243L
NXP32 - 2* - 323L
NXP48 - 2* - 483L
COMPLETE PANEL WITH RELAYS INSTALLED
8 space panel with 8 single pole latching relays, 120/277 volts, 50/60 Hz
16 space panel with 16 single pole latching relays, 120/277 volts, 50/60 Hz
24 space panel with 24 single pole latching relays, 120/277 volts, 50/60 Hz
32 space panel with 32 single pole latching relays, 120/277 volts, 50/60 Hz
48 space panel with 48 single pole latching relays, 120/277 volts, 50/60 Hz
NXP16 - 2* - 083L
NXP24 - 2* - 163L
NXP32 - 2* - 243L
NXP48 - 2* - 323L
PANELS WITH SPACE FOR EXPANSION
16 space panel with 8 single pole latching relays, 120/277 volts, 50/60 Hz
24 space panel with 16 single pole latching relays, 120/277 volts, 50/60 Hz
32 space panel with 24 single pole latching relays, 120/277 volts, 50/60 Hz
48 space panel with 32 single pole latching relays, 120/277 volts, 50/60 Hz
NXP08 - 2* - 00SP
NXP16 - 2* - 00SP
NXP24 - 2* - 00SP
NXP32 - 2* - 00SP
NXP48 - 2* - 00SP
8 space panel with no relays, 120/277 volts, 50/60 Hz
16 space panel with no relays, 120/277 volts, 50/60 Hz
24 space panel with no relays, 120/277 volts, 50/60 Hz
32 space panel with no relays, 120/277 volts, 50/60 Hz
48 space panel with no relays, 120/277 volts, 50/60 Hz
NXR-TN
NXR-TC
NXR-3L
NXR-2N
Two pole, electrically held, normally open, 240/208/480V, 20A - 50/60Hz
Two pole, electrically held, normally closed, 240/208/480V, 20A - 50/60 Hz
Single pole, latching, normally open, 120/277/347V, 30A - 50/60 Hz
Single pole, electrically held, normally open, 120/277V
NXP-DIM8
Eight 0 - 10 volt dimming channel outputs, 100 mA each
TRIM
S
Surface
PANELS WITH SPACE ONLY - NO RELAYS INSTALLED
OPTIONAL RELAYS (ORDER SEPARATELY, FIELD INSTALLED)
3
*ALTERNATE VOLTAGE OPTION
347 volts, 50/60 Hz
OPTIONAL DIMMING CARD (ORDER SEPARATELY, FIELD INSTALLED)
NOTE: Dimming Card Install Limits:
NXP08 1 card, 8 dimmers
NXP24 2 cards, 16 dimmers total
NXP32
3 cards, 24 dimmers total
NXP48
4 cards, 32 dimmers total
133
NXHNB
NXTM Network Bridge Module
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• Uses standard CAT5e patch cable for plug-in connection to SmartPORTTM on
Room Controller
• In and out RJ-45 connections provided for HubbNETTM CAT5e network cable
• Up to 100m of CAT5 cable between bridges
• Self powered by the HubbNET network
• Provides high speed communication link with NX Area Controller
• Five-year limited warranty
ORDERING INFORMATION
NXHNB
134
MODEL
Network Bridge Module for wired connection between
one Room Controller zone and the HubbNET network
NXAC-120
NXTM Area Controller
DISTRIBUTED LIGHTING CONTROLS
FEATURES
• Real-time programming and monitoring of the NX Networked Lighting
Control System through your PC
• No software required—built-in web server provides connection via any web browser
• Graphical User Interface (GUI) makes programming both intuitive and simple
• Local or remote access via the local network or Internet
• Can connect multiple users at once
• Sophisticated user account/password manager
• Integrates NX Lighting Control System and Building Automation System
(BAS) via BACnet IP
• Supports 128 areas, 96 zones per area
• NEMA enclosure with locking door
• Five-year limited warranty
ORDERING INFORMATION
ORDERING INFORMATION
NXAC-120
NXAC-120
MODEL
Area Controller with web server GUI,
HubbNETTM and Ethernet support, 120V operation
135
WIRELESS LIGHTING CONTROLS
wiSCAPETM Wireless Outdoor Lighting Controls
SAFE AND SECURE, SMART AND SCALABLE
To take energy-savings to the next level, take control of your outdoor lighting. Not just for entry ways and facade lighting, but parking
decks or lots and over the entire site. Wireless technology is the latest frontier in aggressive energy-saving strategies; it offers faster
value creation and significant benefits over traditional wired solutions. wiSCAPE brand controls from Hubbell Building Automation
offer you radically smart solutions for new construction or retrofit applications.
Beside the cost of electricity, owners and managers deal with associated lighting expenses daily. Replacing failed lamps or fixtures and
managing the crews, tools and service trucks that service them. Now you can reduce costs while improving performance and security.
Safe and Secure: Good lighting makes pedestrian and parking areas safer and more inviting. New solutions with advanced controls
help reduce costs while improving performance and security. Reduce the overall amount of energy used when your lighting adapts to
the activity level on your grounds. Maintain your lighting networks more effectively.
Smart: Take advantage of the wireless outdoor lighting solution perfect for controlling today’s most advanced LED luminaires. It also
adapts to all other light sources as well as all voltages. Modules are available for 120-347V and 480V light sources, in either 50Hz or
60Hz.
Scalable: No control wiring is required for configuration. wiSCAPE control installations are non-invasive and non-disruptive, making lengthy
wiring processes and relay panels a thing of the past. Each wiSCAPE module features its own logic processor. Scale a system without ever having
to use a router, configure network components or use a central cabinet. Implement wiSCAPE controls anywhere--use two modules in an alleyway
or thousands of modules across commercial or even municipal locations.
136
WIR-GATEWAY
wiSCAPETM Gateway
WIRELESS LIGHTING CONTROLS
FEATURES
• Module/Gateway ratio:1000 modules per Gateway
• Fail-safe operation- defaults to photocell control
• Data storage supports up to six months of rolling data storage
• 128-bit AES encryption
• Five-year limited warranty
ORDERING INFORMATION
Accessory
WIR-GATEWAY
MODEL
WIR-GATEWAY
Blank
CM
MODEM
None
Cellular Modem
STEPDOWN TRANSFORMER
WIR-STPDNXFMR-277 Gateway 277V to 120V Stepdown
WIR-STPDNXFMR-347 Gateway 347V to 120V Stepdown
137
WIR-RME/WIR-RML
wiSCAPETM External Fixture Module
WIRELESS LIGHTING CONTROLS
FEATURES
• On/Off outdoor lighting control with 0-10V full-range dimming
• Bidirectional wireless RF Mesh communications
• Military grade AES-128 communication encryption
• Multi-level grouping and multiple scenarios
• Adjustable minimum and maximum dimming levels
• Programmable power-up state with peak shaving options
• Remotely controllable with instantaneous metering
• Complete integration with wiSCAPE VIEWTM software
• Complete reporting including alarms for maintenance
optimization
• Five-year limited warranty
ORDERING INFORMATION
MODEL
WIR-RME External Fixture Module
L
RADIO
Long Range (1000 ft)
wiSCAPETM Fixture Module
• Switch 3 Amp loads in voltage options of 120, 208, 277 and 347VAC
• Outputs 0-10V for dimming ballasts (Sink+Source)
• Optional Inputs for low-voltage switch, motion and photo sensor
• Optional Dry contact output for driving external contactors
• Bidirectional wireless RF Mesh communications
• Individual addresses of unique serial numbers
• Multi-level grouping and multiple scenarios
• Programmable state after blackout, with peak shaving options
• Demand response (load shedding) and emergency mode ready
• Available in a NEMA 4 enclosure for exterior mounting
• Five-year limited warranty
ORDERING INFORMATION
MODEL
WIR-RML Wireless Fixture Module Long Range
138
24
120
208
277
347
VOLTAGE
24VAC
120VAC
208/240VAC
277VAC
347VAC
INPUT/OUTPUT
Blank None
IO
Input/Output
ENCLOSURE
Blank None
N4
NEMA 4
WIR-MOD-GPRS
wiSCAPETM Cellular Modem
WIRELESS LIGHTING CONTROLS
FEATURES
• Persistent 3G Network
• Connectivity
• Low Power Consumption
• Compact Size for Easy Integration
• Rugged Aluminum Case
• Remote Management and Configuration
• Five-year limited warranty
ORDERING INFORMATION
ORDERING INFORMATION
MODEL
WIR-MOD-GPRS GPRS Cell Modem add-on option
for Gateways
139
WIR-SS
wiSCAPETM Software Suite
WIRELESS LIGHTING CONTROLS
FEATURES
• Secured multi-concurrent users login and tractability
• Module configuration and control
• Creation/Editing of Scenarios - Commands - Groups - Schedules
• Database management
• Historical data logging
• Configuration of modules
• Zone Design (Virtual assignment of Relays to Zones)
• Power Monitoring
• wiSCAPE ViewTM Software is included with each Gateway
ORDERING INFORMATION
WIR-SS
WIR-SS
140
MODEL
Software Suite
SOFTWARE
ENTERPRISE
BACNET
Enterprise
BACnet
DLCPCO
wiSCAPETM Photo Sensor
WIRELESS LIGHTING CONTROLS
FEATURES
• Open loop operation
• Foot-candle range: 0-250FC
• Mounts horizontally
• Five-year limited warranty
ORDERING INFORMATION
DLCPCO
MODEL
DLCPCO Outdoor Photocell Sensor, 0 - 250FC
141
Dimming WASPTM
OUTDOOR OCCUPANCY SENSING
TM
OCCUPANCY AND DAYLIGHT SENSOR
The Dimming WASP Indoor/Outdoor Occupancy Sensor is specifically designed to provide 0-10V (Class 1) control of dimmable fixtures.
Easy to use dip switches allow the user to set unoccupied and occupied dimming levels. The sensor is available in end mount and
surface mount versions in both line and low voltage options. Interchangeable twist-on lenses eliminate need for field masking. All
Dimming WASP sensors feature a daylight sensor for ON/ OFF control of fixtures when there is sufficient natural light. The gasketed
design of the enclosure makes it impervious to dust and able to withstand water ingress making it an ideal sensor for outdoor
including those with temperatures as low as -40°C.
System Features
• Digital Passive Infrared (PIR) sensor
• End mount and surface mount versions
• Supported mounting heights:
• Interchangeable high/low area detection lens options
• High mount lens: 30 ft outdoors; 45 ft indoors
• Low voltage and line voltage models available
• Low mount lens: 16 ft indoors/outdoors
• Low temperature/water-tight/indoor-outdoor versions
• Controls 0-10V dimmable ballasts
• UL and cUL listed
• User controlled dimming presets
• Five-year limited warranty
• Daylight sensor for daylight harvesting applications
142
WSP
Outdoor Occupancy Sensor
OUTDOOR OCCUPANCY SENSING
FEATURES
• Digital Passive Infrared (PIR) sensor
• Supported mounting heights:
• High mount lens: 30 ft outdoors; 45 ft indoors
• Low mount lens: 16 ft indoors/outdoors
• Controls 0-10V dimmable ballasts
• User controlled dimming presets
• Daylight sensor for daylight harvesting applications
• End mount and surface mount versions
• Interchangeable high/low area detection lens options
• Low voltage and line voltage models available
• Low temperature/water-tight/indoor-outdoor versions
• UL and cUL listed
• Five-year limited warranty
ORDERING INFORMATION
LWO
WSP
MODEL
WSP
MOUNTING
EM End Mount
SM Surface Mount
INPUT VOLTAGE
24V
UNV
208
480
24VDC (Low voltage)
120/277/347VAC
208/240VAC
D
OUTDOOR
LWO Low-Temp/
DIMMING OPTION
D Dimming Enabled
Water Tight/
Indoor Outdoor
COLOR
BLANK White
Black
BK
Gray
GY
480VAC
LENS ORDERING INFORMATION
WSP
MODEL
WSP
COVERAGE
L360
L180
LA
LHA
360 Area Lens
180 Area Lens
Aisle Lens
MOUNTING HEIGHT
Blank High Mount
Low Mount
LB
COLOR
ENVIRONMENT
Blank
LWO
Indoor
Low-Temp/Water Tight/Outdoor
WH
BK
GY
White
Black
Gray
Half Aisle Lens
143
CX LIGHTING CONTROL PANELS
CXTM Lighting Control Panels
AFFORDABLE SWITCHING AND DIMMING
CX Commercial Lighting Control Panels provide feature rich and cost effective lighting control for maximum energy savings.
You can save up to 50% in labor and materials when used in place of conventional time clock and contactor combinations. The
use of the Astronomical Clock in place of roof mounted photocells increases cost savings, lowers maintenance, and improves
reliability.
SAVE TIME
• Compact single enclosure includes relays, control
functions and input terminals for low voltage devices.
• All inputs are software assignable to any low voltage
input device including switches, motion sensors, and
photocells.
• Low voltage devices connect directly to panel without any
ancillary parts such as power packs.
• LCD user interface incorporates easy to follow intuitive
programming tools.
SAVE ENERGY
•
•
144
CX Panels meet ASHRAE 90.1, IEEC and California (CEC)
Title 24 energy codes.
CX Panels contribute to LEED certification requirements.
• Allows multiple low voltage inputs from switches, motion
sensors, and photocells to enhance energy savings
for scenarios such as manual switch ON and automatic
motion sensor OFF control.
LOWER COST
• Can save up to 50% in parts and labor cost over
conventional time clock and contactor systems.
• Lowers energy consumption with expanded programming
options.
• Astronomical clock eliminates the need for roof mounted
photocells.
• Pre-programmed scenarios offer a wide variety of options
to maximize energy savings for each possible control
zone.
INCREASE CONTROL
• Sunrise/sunset controls provided using internal
astronomical clock.
• Scenarios offer many easy to use control combinations.
• Priorities and masking allow for personalized control
solutions.
CX
CXTM Lighting Control Panels
CX LIGHTING CONTROL PANELS
FEATURES
• 4, 8, 16, and 24 Relay Spaces / Dimming Channels
• Primary and secondary panel configurations on 8, 16, & 24 relay panels
• LCD user interface with keypad
• 365 day programming with 64 schedules
• Astronomical and real time clock
• Programmable dry contact inputs
• Selectable pre-programmed scenarios
• Programmable inputs accept low voltage switches, photocells or motion sensors
• Two low-voltage dry contact output relays
• Program uploads via removable SD memory card
• Listed to UL916, UL924 and cUL
• Five-year warranty
ORDERING INFORMATION
CX
MODEL
CX CX Control
Panel
S
SPACES
04
08
16
24
4 Relay Spaces
8 Relay Spaces
16 Relay Spaces
24 Relay Spaces
INPUT VOLTAGE
2 120/277 Dual
Tap
ENCLOSURE
S NEMA 1 Surface
3 347/480 Dual
Tap
RELAY QUANTITY
00 No Relays - Spaces
Only (See Note 5)
04 4 Relays Installed
(See Note 4)
08 8 Relays Installed
(See Note 4)
16 16 Relays Installed
(See Note 4)
NOTES:
1. Required for CX04 Series Panels. Not Available for CX08.
2. Not available for CX04.
3. 2-Pole relays take the same amount of space as 1-Pole relays.
4. Installed relays must be all of the same type. Relay Type TC is not available in fully populated panels
5. “00” option has no relays, all must be installed in the field
6. Secondary panel includes (2) master/secondary panel interface cards
RELAY TYPE
SP Space Only
2N 20A Electrically
Held NO 120277V
3L Latching 120277-347V
TN 20A Electrically
Held NO 480V
OPTIONS
N Stand Alone
Panel (See
Note 1)
M Master Panel
(See Note 2)
S Secondary Panel
(See Note 2 and
Note 6)
24 24 Relays Installed
(See Note 4)
145
CXDIMCONTRBD
CXTM Dimming Option Card
CX LIGHTING CONTROL PANELS
FEATURES
• Full range dimming with Preset dimming levels
• Ramp Up, Fade Down, Minimum Dim Level
• Max Dim Level (Demand Response System Settings)
• Operates with 0-10V drivers and dimmable ballasts
• Provides manual and automatic control of dimming levels
• Upgrade option to Existing and New CX Panels
• 8 Dimming Channels per card
• Works with Zone5 Switches
• Five-year warranty
ORDERING INFORMATION
CXDIMCONTRBD
CXDIMCONTRBD
146
MODEL
CX Panel 8-Channel Dimming Controller Option Board
CXR
CXTM Relays
CX LIGHTING CONTROL PANELS
FEATURES
• Relays are mounted to individual relay cards
• Four types of relays – 20A/1P, N/O and 20A/2P, N/O, N/C (14K SCCR) and 30A 1P
latching (18K SCCR)
• Smart Relay card self-identifies type automatically to panel
• Each relay includes 1 programmable input for low voltage switches, photocells, or
motion sensors
• Panels are ordered fully populated with the same relay type or with space only for
field installation of relay combinations
• Relay cards include a plug-in connector to panel motherboard and a single screw to
secure it to the panel enclosure
• Relay cards include a manual override control button and LED status indication
• Listed to UL916 standard, UL924 and Canadian cUL
• Five-year warranty
INFORMATION
CXR
MODEL
CXR
RELAY TYPE
2N
3L
TN
TC
20A 1-Pole Electrically Held N.O. 120-277V 14KSCCR @ 277VAC
30A 1-Pole Latching 120-277-347V 18KSCCR @ 277VAC, 14KSCCR @ 347VAC
20A 2-Pole Electrically Held N.O. 480V 14KSCCR @ 480VAC
20A 2-Pole Electrically Held N.C. 480V 14KSCCR @ 480VAC
147
LightHAWK®2 Vacancy/Occupancy Sensors
INTELLIGENT VACANCY/OCCUPANCY SENSING
The LightHAWK family of wall switch vacancy/occupancy sensors provides a wide variety of advanced features and options to make it easy for building
owners and managers to meet ever changing demands.
Vacancy and Occupancy - LightHAWK2 sensors have the option
of operating in either Vacancy Mode (Manual ON – Auto OFF) or
Occupancy Mode (Auto ON – Auto OFF) in a single sensor.
Vacancy ONLY Mode - Certain codes now require that motion sensors
operate only in Vacancy Mode. LightHAWK2 sensors offer models
that operate in Vacancy Only Mode to meet these requirements. All
models are shipped standard in Vacancy Mode.
Single or Dual Relay Control - Certain LightHAWK2 sensors are
available in either single or dual relay. The dual relay models are
ideal for bi-level switching or dual-relay control of a lighting load
and a motor load, such as a fan.
Photocell Override - All LightHAWK2 sensors come with a built-in
photocell. If activated during commissioning, this feature will
provide additional energy savings by allowing the lights to remain
off when the room is both occupied and has enough natural light
from a window or skylight.
No Neutral Required - LightHAWK2 sensors are available with
or without a neutral connection. A neutral wire is often missing
in retrofit applications where a standard light switch has been
removed. Our unique Leakage-to-Ground technology makes it
possible to install the LightHAWK2 sensor without the expense of
pulling neutral connections to each switch location.
Durable Construction - Utilizing high-impact injection-molded
plastics, LightHAWK2 sensors are designed to last. Each sensor
comes with RhinoTuff™ vandal-resistant lens and a wrap-around
galvanized steel mounting strap.
Smart IntelliDAPT® Technology - Patented IntelliDAPT Technology
allows LightHAWK2 sensors to use microprocessors and internal
software to constantly monitor the controlled area and automatically
adjust the sensitivity and timing based on environmental history.
Stand Alone Lighting Control - LightHAWK2 sensors are
stand-alone control devices. Standard light switches can be
changed out to motion sensors as needed, allowing energy savings
without a large initial capital investment.
148
LHMTDS/LHMTD
LightHAWK®2 Dual Technology Wall Switch Sensors
VACANCY/OCCUPANCY SENSING
FEATURES
• Digital Dual Technology: (US) and (PIR) sensors
• IntelliDAPT® self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
ORDERING INFORMATION
LHMTS
MODEL
Dual Technology Single Relay
LHMTD
Dual Technology Dual Relay
BUTTONS
0
1*
2†
G
N
24V
G347
N347
WIRING
Ground (120/277V)
Neutral (120/277V)
Low Voltage
Ground (347V)
Neutral (347V)
WH
IV
LA
GY
BK
COLOR
White
Ivory
Light Almond
Gray
Black
Blank
M
MODE
Switchable Vacancy or
Occupancy Mode
Vacancy Mode Only
NOTE: * Only available with LightHAWK2 Dual Technology Single Relay.
† Only available with LightHAWK2 Dual Technology Dual Relay.
- Low voltage sensors require a power pack that is sold separately.
149
LHUSS/LHUSD
LightHAWK®2 Ultra Sonic Wall Switch Sensor
VACANCY/OCCUPANCY SENSING
FEATURES
• Digital Ultrasonic (US) sensor
• IntelliDAPT® self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 400 square-foot, 180° coverage area
• 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
ORDERING INFORMATION
LHUSS
LHUSD
MODEL
Ultrasonic Single Relay
Ultrasonic Dual Relay
BUTTONS
0
1*
2†
NOTE: * Only available with LightHAWK2 Ultrasonic Single Relay.
† Only available with LightHAWK2 Ultrasonic Dual Relay.
- Low voltage sensors require a power pack that is sold separately.
150
G
N
24V
G347
N347
WIRING
Ground (120/277V)
Neutral (120/277V)
Low Voltage
Ground (347V)
Neutral (347V)
WH
IV
LA
GY
BK
COLOR
White
Ivory
Light Almond
Gray
Black
Blank
M
MODE
Switchable Vacancy or
Occupancy Mode
Vacancy Mode Only
LHIRS/LHIRD
LightHAWK®2 Passive Infrared Wall Switch Sensor
VACANCY/OCCUPANCY SENSING
FEATURES
• Digital Passive Infrared (PIR) sensor
• IntelliDAPT® self-adaptive technology—no manual adjustment required
• 1 or 2 relay models for single-level switching or bi-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
ORDERING INFORMATION
LHIRS
LHIRD
MODEL
Passive Infrared Single
Relay
Passive Infrared Dual Relay
BUTTONS
0
1*
2†
G
N
24V
G347
N347
WIRING
Ground (120/277V)
Neutral (120/277V)
Low Voltage
Ground (347V)
Neutral (347V)
WH
IV
LA
GY
BK
COLOR
White
Ivory
Light Almond
Gray
Black
Blank
M
MODE
Switchable Vacancy or
Occupancy Mode
Vacancy Mode Only
NOTE: * Only available with LightHAWK2 Passive Infrared Single Relay
† Only available with LightHAWK2 Passive Infrared Dual Relay
- Low voltage sensors require a power pack that is sold separately.
151
LHD-IRS
LightHAWK®2 Dimming PIR Wall Switch Sensor
VACANCY/OCCUPANCY SENSING
FEATURES
• Digital Passive Infrared (PIR) sensor
• IntelliDAPT® self-adaptive technology—no manual adjustment required
• 1 relay model for single-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Available with or without Neutral
• 1,000 square-foot, 180° coverage area
• RhinoTuff™ vandal resistant lens
• 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year warranty
ORDERING INFORMATION
ORDERING INFORMATION
LHD-IRS
LHD-IRS
152
MODEL
Dimming Passive Infrared
Single Relay
1
BUTTONS
1
N
N347
WIRING
Neutral (120/277V)
Neutral (347V)
WH
IV
LA
GY
BK
COLOR
White
Ivory
Light Almond
Gray
Black
Blank
M
MODE
Switchable Vacancy or
Occupancy Mode
Vacancy Mode Only
LHN-IRS1
LightHAWK®2 Night Light PIR Wall Switch Sensor
VACANCY/OCCUPANCY SENSING
FEATURES
• Digital Passive Infrared (PIR) sensor
• IntelliDAPT® self-adaptive technology—no manual adjustment required
• 1 Relay model for single-level switching
• Occupancy (auto-on) and Vacancy (manual-on) operating modes
• Night Light mounted under lens
• 1,000 square-foot, 180° coverage area
• RhinoTuff ™ vandal resistant lens
• 120/277VAC operation
• No minimum load requirement
• Zero Arc Point Switching
• Five-year limited warranty
ORDERING INFORMATION
ORDERING INFORMATION
LHN-IRS
LHN-IRS
MODEL
Night Light Passive Infrared
Single Relay
1
BUTTONS
1
N
N347
WIRING
Neutral (120/277V)
Neutral (347V)
WH
IV
LA
GY
BK
COLOR
White
Ivory
Light Almond
Gray
Black
Blank
M
MODE
Switchable Vacancy or
Occupancy Mode
Vacancy Mode Only
153