2013/2014 MLCC / Varistors / Film Capacitors / Choke Coils
ELECTRONIC
COMPONENTS & DEVICES
PRODUCTS
CAT.No.
Aluminum Electrolytic Capacitors
1001
Multilayer Ceramic Capacitors
1002
Film Capacitors
1003
Metal Oxide Varistors TNRTM
1006
Amorphous / Dust Choke Coils
1008
Electric Double Layer Capacitors
Electro-Mechanical Products
[ English ]
Notes on Safety
■ Always read "Notes on Use" before using the product in order to enable you to use the product
correctly and prevent any faults and accidents from occurring.
■ Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to
refer to it as well as this brochure prior to the order of the products. Some specific notes on use of
the ordered product may be described in the specifications.
The electronic components described in this catalogue were designed and developed for use in general electronic
equipment, such as ; general household appliances, office and AV equipment, information and communication
equipment, etc.
We ask you, therefore, to appraise, examine and judge the suitability of these electronic components very carefully, or
contact us, for designs that require higher levels of safety and reliability, such as ; medical or aerospace equipment,
equipment related to nuclear power, safety devices for automotive products, or disaster prevention equipment.
When using these components for circuits in general electronic equipment that also require higher levels or safety and
reliability, we recommend that you carry out a thorough appraisal of the component's intended use in the application
and add any necessary protection networks during the design phase.
NIPPON CHEMI-CON CORPORATION
Distributed or Represented by
'13.07
NIPPON CHEMI-CON
http://www.chemi-con.co.jp/e/
ELECTRONIC COMPONENTS & DEVICES
2013/2014
English
CAT.NO.E1002S / E1006V / E1003P / E1008N
MULTILAYER CERAMIC CAPACITORS
METAL OXIDE VARISTORS TNRTM
FILM CAPACITORS
AMORPHOUS / DUST CHOKE COILS
METAL OXIDE VARISTOR TNRTM
Production Guide
P24-40
Series Table
Precautions and Guidelines
Group Chart / Part Numbering.System
Technical Terms on Varistors
Safety Standards
Lead Forming Specifications
Taping Specifications (Disk Type)
Packaging
Minimum Order Quantity
Product Specifications
Disk Type TNR V Series
TNR SE Series
TNR H Series
TNR GF Series
P24
P25
P26
P27
P28
P31
P32
P39
P40
P41-67
P42
P58
P63
P67
P69-75
Application Guide
Pulse Life Time Ratings
Application Examples
23
P70
P75
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
Item
Disk Type
Series
SERIES TABLE
Features
Page
V Series
Very Large Surge Capability
42
SE Series
Non Flammable Type
Very Large Surge Capability
58
H Series
High Energy Low Voltage
63
GF Series
Disk Type with Thermal Fuse
67
All the series mentioned above is RoHS compliant products.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
24
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
PRECAUTIONS AND GUIDELINES
1 The performance of varistors may deteriorate, the inside elements may be damaged, and they cause the varistors to
smoke or catch fire, if the following precautions are not observed.
(1) Do not use varistors in places whose temperature exceeds their rated operating temperature due to direct sunlight or
heating objects.
(2) Do not use varistors in a humid place directly exposed to the weather or steam.
(3) Do not use varistors in places filled with dust, salt-mist or corrosive gas.
(4) The soldering method is flow soldering and iron soldering. The recommended conditions are as follows.
・Flow soldering : Pre-heat 100±20℃，60 to 90 sec., Soldering 260±5℃, 10±1sec.
・Iron soldering : 350±10℃, less than 4sec.
(5) Do not use solvents such as thinner and acetone which dissolve or make the exterior covering of varistors
deteriorate.
Ultrasonic cleaning shall be so set that the vibration can not travel the assembly boards.
(6) Do not expose varistors to intense vibration, shock (drop shock etc.) or pressure making the exterior covering or inside
element crack.
(7) Do not apply high voltage exceeding the rated maximum applying voltage to varistors.
In the case of automotive jump starts, however, use the varistors within short-term allowable voltage limits prescribed in
the catalog.
If voltage wave form is not complete DC, a maximum value of peak voltages shall not exceed the rated maximum applying voltage.
(8) Do not apply peak currents exceeding the rated maximum energy.
(9) When peak currents are repeatedly applied to varistors, do not exceed the pulse life time ratings prescribed in the catalog.
(10) When peak currents are intermittently applied to varistors at short intervals, do not exceed the rated wattage.
(11) Using varistors in circuits whose frequency exceeds 1kHz may damage their elements by heat generation due to dielectric loss.
(12) In the case of coating or molding varistors with resin, do not use the resin which makes the varistors deteriorate.
(13) Do not install varistors in places near by flammable substances.
2 Varistors may blow up, if the following precautions are not observed.
(1) Do not use varistors in circuits applied peak currents exceeding the specified limits.
(2) Do not exceed the rated maximum applying voltage.
3 Varistors do not function but damages devices, if the following precautions are not observed.
(1) Hold the root of the varistor lead when bending or cutting the lead.
(2) The lead close to insulation cover shall not be bent or applied to outer force.
(3) When soldering the lead, do not damage a solder material and insulator fabricating the varistor.
4 The following preventive measures should be made for avoiding unexpected accident.
(1) When using a varistor in between circuits, connect an earth leakage breaker (ground-fault circuit interrupter) or current
fuse in series with the varistor.
(2) When using a varistor in between a circuit and ground, connect an earth leakage breaker (ground-fault circuit interrupter)
or both of a current fuse and thermal fuse in series with the varistor. Also, in case of excessive voltage due to ground
short circuit accident, use the varistor with the rated voltage higher than the excessive voltage.
5 Store varistors at a temperature of –10 to + 40℃ and a relative humidity of less than 75%.
Avoid storing in environment of rapid changes in temperature, direct sunlight, corrosive gas or dust, and store with the
varistors packaged and use within 1 year.
Please confirm soldering of the lead wire with the product stored in a long time in more than 1 year.
6 Follow safety standards such as Electrical, UL, CSA and so forth, which specify the use of varistors.
7 Catalogs
Product specifications in this catalog are subject to change without notice.
Please request and make sure our product specifications before purchase and/or use.
Parformance test data in the catalogs show typical values, which are not assured in the catalogs.
8 Regarding compliance for EU REACH Regulation
(1) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published
on May 2008), our electronic components are "articles without any intended release". Therefore they are not applicable
for "Registration" for EU REACH Regulation Article 7 (1).
Reference: Electrolytic Condenser Investigation Society
"Study of REACH Regulation in EU about Electrolytic Capacitor" (publicized on 13 March 2008)
(2) Nippon Chemi-Con develops the products without substance of very high concern(SVHC).
DEHP(CASNo.117-81-7) was contained as some covering material, Nippon Chemi-Con abolished use of DEHP totally
at June, 2011.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
25
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
GROUP CHART, P/N SYSTEM
TNR is a "NEW" metal oxide varistor having steep non-linear V-I characteristics and high discharge current capability,
as follows:
◆TNR Features
1. Excellent transient voltage suppression
2. High discharge current capability
3. Wide range of voltage ratings
4. Symmetrical V-I characteristics (Non Polarity)
5. Fast response
6. Steady operation for repeating surge
7. Low temperature coefficient
8. High reliability
9. UL recognized
10. CSA recognized
"TNR" characteristics
300
200
100
①
-4
◆Applications
-3 -2 -1
Current(mA)
1 2 3 4 5
①
②
100 200 300
Voltage(V)
①
②
TNR
SiC Varistor
②
1. Electronics instrument protection
2. Telephone system protection
3. Relay contact point protection
4. Rectification diode protection
5. SCR protection
6. Reduction of abnormal voltage in high voltage current
7. Switching transistor proteciton
8. Reduction of switching surge in electromagnetic brake
9. Prevention of error in digital circuit
10. Reduction of noise from an abnormal voltage
◆Group Chart
V Series
H Series
SE Series
GF Series
◆Part Numbering System
The current parts numbering system is changed to new system for global coding.
Your cooperation will be very much appreciated.
1
2
3
4
5
6
7
8
9
10
11
12
T ND 1 4 V- 2 7 1 K B
13
14
15
16
17
18
①Category
Design Code
Lead Forming / Taping
Packing Style⑥
Varistor Volt. Tolerance⑤
Varistor Voltage④
Series③
Size code
Product Form②
Category①
T
ND
NL
V-
Metal Oxide
Varistors
TNR
②Product Form
Disk Type
Sleeve Type
③Series
V Series
④Varistor Voltage
The first two digits are significant
figures and the third one denotes
the number of following zeros.
⑤Varistor Volt. Tolerance
K
B
T
±10%
⑥Packing Style
Bulk
Taping
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
26
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
Technical Term
TECHNICAL TERMS ON VARISTORS
Description
Varistor Voltage
Voltage across the varistor measured at CmA DC.
C = 0.1 or 1.0 as specified.
Max. Allowable Voltage
(ACrms)
Maximum continuous sinusoidal RMS voltage which may be applied.
Max. Allowable Voltage (DC)
Maximum continuous DC voltage which may be applied.
Maximum Clamping Voltage
Peak voltage across the varistor, measured under conditions of a specified
peak impulse current and specified waveform (8/20μs) applied 1 time.
Rated Wattage
Maximum power that can be applied within the specified ambient
temperature.
Maximum Peak Current
Maximum current within the ±10% varistor voltage change with
standard impulse current (8/20μs) applied 1 time.
Crest Value
100
90
Current (%)
Current Wave Form for
Clamping Voltage Test and
Maximum Peak Current
50
10
0
20μs
8μs
Impulse Duration Time
Energy
Maximum energy within the ±10% varistor voltage change when 1 impulse
msec long is applied. = 2 or 20 ms as specified.
Capacitance
Typical value measured at a 1kHz test frequency.
(Sin wave. Reference purpose only)
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
27
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SAFETY STANDARDS
SAFETY STANDARDS for V Series
◆TNR V Series / Recognized safety standards
Standards
UL1449 3rd.
Title
Category Name
VZCA2 (USA)
VZCA8 (Canada)
CSA C22.2
No.1 Class
2221 01
-----
VDE
-----
File No.
Surge Protective Devices
AUDIO AND VIDEO EQUIPMENTAccessories and Parts for Electronic
Equipment
Varistor for Across-the-line use as
transient protection on 120 V ac
Varistor
IEC
61051-1:2007-04
61051-2:1991
61051-2-2:1991
Varistor Voltage Range
E323623
82∼1800 V
LR-97864
200 ∼1800 V
118623
15∼1800 V
UL1414 was abolished as of December 25, 2013. Varistor were previously evaluated to UL1414 and covered under category FOWX2,
will be evaluated to UL1449 and covered under category VZCA2. When you apply, please be careful. Please ask for details UL.
Recognized Part numbers
Rating
Varistor voltage
(V)
820K
101K
121K
151K
181K
201K
221K
241K
271K
331K
361K
391K
431K
471K
511K
561K
621K
681K
751K
821K
911K
102K
112K
122K
152K
182K
82
100
120
150
180
200
220
240
270
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1500
1800
"***K": Rating
: UL1449,
: CSA,
Part Number
TND05V-***K
: VDE,
TND07V-***K
TND09V-***K
TND10V-***K
TND12V-***K
TND14V-***K
TND20V-***K
: VDE and IEC 60950-1:2005,Annex Q
*Coverage of UL1449
In UL1449, the coverage is prescribed according to surge current as follows.
Type
Equipment where TNR is used
Varistor Rating
Type 3
Type 2
Others
Cord Connected Direct Plug-In
Permanently Connected
Others
TND10V(621K-182K), TND12V(431K-182K)
TND14V(201K-182K), TND20V(820K-182K)
TND05V, TND07V, TND09V, TND10V(820K-561K), TND14V(820K-181K)
*Recognized marking
UL, CSA : on the products
VDE : on the package label
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
28
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SAFETY STANDARDS
◆The AC Rated Voltage and Maximum Allowable Voltage
Rating
820K
101K
121K
151K
181K
201K
221K
241K
271K
331K
361K
391K
431K
471K
511K
561K
621K
681K
751K
821K
911K
102K
112K
122K
152K
182K
Maximum Allowable Voltage
ACrms (V)
50
60
75
95
110
130
140
150
175
210
230
250
275
300
315
350
385
420
460
510
550
625
680
720
860
1000
AC Rated Voltage (Vrms)
DC (V)
65
85
100
125
145
170
180
200
225
270
300
320
350
385
410
460
505
560
615
670
745
825
895
980
1220
1465
UL1449
45
55
68
86
100
118
127
136
159
189
209
227
250
272
286
318
350
381
418
463
500
568
600
600
600
600
CSA
N/A
N/A
N/A
N/A
N/A
118
127
136
159
189
209
227
250
272
286
318
350
381
418
463
500
568
600
600
600
600
◆Application Notes
1) CSA regulate "Maximum Rating Fuse" for using TNR to "Audio, Video and Similar Electronic Equipment" as below
Maximum Peak Current
8/20μs, 1 time(A)
Up to 500
501∼2000
2001∼6000
Over 6000
Type of TNR
Maximum Rating of Fuse
(A)
3
5
10
Not specified
TND05V, TND07V
TND09V, TND10V, TND12V, TND14V
TND20V
2) "Rated Voltages" are specified for UL/CSA recognized components besides Maximum Allowable Voltage because of conforming to
the Standby Current specified in safety standards.
In case of making an application to UL/CSA approval for equipment with TNR, the maximum AC operating voltage of equipment
shall be lower than the TNR Rated Voltage.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
29
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SAFETY STANDARDS
SAFETY STANDARDS for SE Series
◆TNR SE Series / Recognized safety standards
Standards
UL1449 3rd.
Category Name
Title
VZCA2 (USA)
Surge Protective Devices
VZCA8 (Canada)
CSA C22.2
No.1 Class
2221 01
-----
VDE
-----
File No.
AUDIO AND VIDEO EQUIPMENTAccessories and Parts for Electronic
Equipment
Varistor for Across-the-line use as
transient protection on 120 V ac
Varistor
IEC
61051-1:2007-04
61051-2:1991
61051-2-2:1991
Varistor Voltage Range
E323623
220∼620 V
LR-97864
220∼620 V
118623
220∼620 V
Symbol
UL1414 was abolished as of December 25, 2013. Varistor were previously evaluated to UL1414 and covered under category FOWX2,
will be evaluated to UL1449 and covered under category VZCA2. When you apply, please be careful. Please ask for details UL.
Recognized Part numbers
Rating
221K
241K
271K
431K
471K
511K
561K
621K
"***K": Rating
: UL1449,
Part number
Varistor voltage
(V)
TND10SE***K
TND12SE***K
TND14SE***K
TND20SE***K
220
240
270
430
470
510
560
620
: CSA,
: VDE,
: VDE and IEC 60950-1:2005,Annex Q
*Coverage of UL1449
In UL1449, the coverage is prescribed according to surge current as follows.
Type
Equipment where TNR is used
Type 3
Cord Connected Direct Plug-In
TND10SE(621K), TND12SE(431K-621K)
Type 2
Permanently Connected
TND14SE(221K-621K), TND20SE(221K-621K)
Others
Others
TND10SE(221K-511K)
*Recognized marking
UL, CSA : on the products
Varistor Rating
VDE : on the package label
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
30
CAT. No. E1006V
METAL OXIDE VARISTORS TNR TM
●This
LEAD FORMING SPECIFICATIONS
Specifies the lead forming specifications for Disk Type (V, SE, H series)
◆FORM
①BDS
D
Type
②BCS
T
Type
H
T
E
L
φd
C
W
◆DIMENSIONS
Unit : mm
Type
5V, 7V, 9V, 9H
10V, 12V, 14V, 12H, 15H
20V, 20SE, 23H
Lead style code
D
T
BDS
refer to each spec.
refer to each spec.
BCS
refer to each spec.
refer to each spec.
BCS
refer to each spec.
refer to each spec.
+2.0
-1.0
5.0±1.0
5.0±1.0
0.6±0.05
2.0±0.5
-
+2.0
-1.0
5.0±1.0
7.5±1.0
0.8±0.05
2.0±0.5
refer to each spec.
+2.0
-1.0
5.0±1.0
10.0±1.0
0.8±0.05
2.0±0.5
refer to each spec.
H
L
W
φd
C
E
6.0
6.0
6.0
◆PART NUMBERING SYSTEM (BULK)
Code
Category
T
Metal Oxyde Varistor TNR
1
T
Code
ND
2
3
N D
Category Product Form
Code
05
07
09
10
12
14
15
20
23
Product Form
Disk Type
Varistor Voltage
The first two digits are sighificant figures and
the third one denote the number of following zeros.
4
8
5
1 2
Size
Size
φ5
φ7
φ9
φ10
φ12
φ14
φ15
φ20
φ23
6
7
V Series
9
10
4 7 1
Varistor Voltage
Code
VSE
HGF
Code
K
Code
11
K
12
13
14
B 0 0
15
Varistor Bulk Forming Code
Voltage
Tolerance
16
17
18
A A A 0
Design code
Series
V Series
SE Series
H Series
GF Series
Varistor Volt. Tolerance
±10％
BDS (300)
B00 (None)
BCS (300)
B00 (None)
Type
5V,7V,9V,9H
10V,12V,14V,20V,
20SE,12H,15H,23H
Note : The Code (300) is the Previous Code.
Form-A
Form-B
(Parallel)
Lead Style
Crimped （Form-B）
Straight （Form-B）
Crimped （Form-A）
Straight （Form-A）
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
31
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
●This
Specifies taping specifications for TNR varistors which have normal
disk diameter of 5 to 15mm and nominal varistor voltage of 15 to 510V.
◆PART NUMBERING SYSTEM
Code
Category
T
Metal Oxyde Varistor TNR
1
T
Code
ND
2
3
N D
Category Product Form
Code
05
07
09
10
12
14
15
Product Form
Disk Type
4
5
1 2
Size
Size
φ5
φ7
φ9
φ10
φ12
φ14
φ15
6
7
V Series
Varistor Voltage
The first two digits are sighificant figures and
the third one denote the number of following zeros.
8
10
11
K
12
13
14
T F A
Varistor Voltage Varistor Taping Code
Voltage
Tolerance
Code
VSE
HCode
K
9
4 7 1
15
16
17
18
A A A 0
Design code
Series
V Series
SE Series
H Series
Varistor Volt. Tolerance
±10％
Form-A
Form-B
Feed hole pitch Feed hole pitch
(Parallel)
12.7mm
15.0mm
Code
Code
Type
Lead Style
−
Crimped (Form-B)
TFA (T15)
5V,7V,9V,9H
−
Straight (Form-B)
TBA (T25)
−
TEA (T1)
Crimped (Form-A)
TFA (T15)
Crimped (Form-B)
TFB (T8)
10V,12V,14V
−
Straight (Form-A)
TAA (T2)
Straight (Form-B)
TBA (T25)
TBB (T7)
Crimped (Form-A)
−
TEA (T1)
TFA (T15)
10SE,12SE,
Crimped (Form-B)
TFB (T8)
−
14SE
TAA (T2)
Straight (Form-A)
TBA (T25)
Straight (Form-B)
TBB (T7)
TEA (T1)
−
Crimped (Form-A)
TFA (T15)
Crimped (Form-B)
−
12H,15H
TAA (T2)
−
Straight (Form-A)
TBA (T25)
Straight (Form-B)
−
Note : The Code (T1,T15,T2,T25,T8,T7) are the old taping code.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
32
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆5V, 7V, 9V, 9H : TYPE TFA(T15) (Crimped Lead)
T
D
P2
ΔP
Δh
H1
H
P
W2
1.0 MAX.
J
W0
P1
W
W1
L
H0
φd
F
Type
5V
13.0
30.0
Height
(H Max.)
Component Height (H1 Max.)
7V
14.5
31.0
9V
17.5
34.0
t
φD0
P0
9H
16.0
33.0
◆TYPE TFA(T15)
Parameter
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole center to component center
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
Hold down tape position
Seating plane height
Component height
Lead position
Defective article cut position
Code
Dimensions (mm)
D
T
φd
P
P0
φD0
P1
P2
W1
F
Δh
ΔP
W
W0
t1
0.6±0.05
12.7±1.0
12.7±0.3
4.0±0.2
3.85±0.7
6.35±1.3
9.0±0.5
5.0±0.8
0±2.0
0±1.0
18.0± 1.0
0.5
5.0 Min.
t2
W2
H0
H1
J
L
1.5 Max.
3.0 Max.
16.0±0.5
6.0 Max.
11.0 Max.
Note
Refer to the applicable detail spec
Refer to the applicable detail spec
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
0.6±0.3
Please refer to the above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
33
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆ 5V, 7V, 9V, 9H : TYPE TBA(T25) (Straight Lead)
T
D
P2
ΔP
H1
Δh
H
H2
P
W2
1.0 MAX.
J
W0
P1
W
W1
L
H0
φd
F
Type
5V
10.0
29.0
Height
(H Max.)
Component Height (H1 Max.)
7V
11.5
30.0
9V
14.5
33.0
t
φD0
P0
9H
13.0
32.0
◆TYPE TBA(T25)
Parameter
Code
Dimensions (mm)
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole center to component center
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
D
T
φd
P
P0
φD0
P1
P2
W1
F
Δh
ΔP
W
W0
t1
t2
0.6±0.05
12.7±1.0
12.7±0.3
4.0±0.2
3.85±0.7
6.35±1.3
9.0±0.5
5.0±0.8
0±2.0
0±1.0
18.0± 1.0
0.5
5.0 Min.
0.6±0.3
1.5 Max.
W2
H0
H1
H2
J
L
3.0 Max.
20.0± 1.5
1.0
3.0 Max.
6.0 Max.
11.0 Max.
Hold down tape position
Height from tape center to component base
Component height
Lead position
Defective article cut position
Note
Refer to the applicable detail spec
Refer to the applicable detail spec
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
9V : 34.0 Max.
Please refer to the above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
34
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆10V, 12V, 14V, 10SE, 12SE, 14SE, 12H, 15H : TYPE TEA(T1), TFA(T15) (Crimped Lead)
P
TFA(T15)
T
T
ΔP
Δh
Δh
H1
H
D
TEA(T1)
1.0 MAX.
W2
F0
φD0
P1
1.0 MAX.
W
J
W0
W1
H0
φd
P0
F1
The position of a fold in case of box storage
Type
10V
17.5
35.0
Height
(H Max.)
Component Height (H1 Max.)
t2
12V
19.0
36.0
14V
21.0
38.0
10SE
21.0
38.0
t1
12SE
24.0
41.0
14SE
25.0
42.0
12H
21.0
38.0
15H
24.0
41.0
◆TYPE TEA(T1), TFA(T15)
Parameter
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
Hold down tape position
Seating plane height
Component height
Lead position
Code
D
T
φd
P
P0
φD0
P1
W1
F0
F1
Δh
ΔP
W
W0
t1
t2
W2
H0
H1
J
Dimensions (mm)
Note
Refer to the applicable detail spec
Refer to the applicable detail spec
0.8±0.05
25.4±1.0
12.7±0.3
4.0±0.2
2.6±0.5
9.0±0.5
7.5±0.8
5.0 Nom.
0±2.0
0±1.0
+1.0
18.0 −0.5
5.0 Min.
0.6±0.3
1.5 Max.
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
3.0 Max.
16.0±1.0
6.0 Max.
Please refer to the above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
35
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆10V, 12V, 14V, 10SE, 12SE, 14SE, 12H, 15H : TYPE TAA(T2), TBA(T25) (Straight Lead)
P
T
Δh
Δh
F0
1.0 MAX.
W2
φD0
P1
1.0 MAX.
W
J
W0
W1
H0
T
ΔP
H1
φd
TBA(T25)
H
H2
D
TAA(T2)
F1
P0
The position of a fold in case of box storage
Type
10V
15.5
40.0
Height
(H Max.)
Component Height (H1 Max.)
12V
17.0
41.0
14V
19.0
43.0
t2
10SE
18.5
43.0
12SE
23.0
48.0
t1
14SE
24.0
49.0
12H
16.5
41.0
15H
19.0
44.0
◆TYPE TAA(T2), TBA(T25)
Parameter
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
Hold down tape position
Height from tape center to component base
Component height
Lead position
Code
D
T
φd
P
P0
φD0
P1
W1
F0
F1
Δh
ΔP
W
W0
t1
t2
W2
H0
H1
H2
J
Dimensions (mm)
Note
Refer to the applicable detail spec
Refer to the applicable detail spec
0.8±0.05
25.4±1.0
12.7±0.3
4.0±0.2
2.6±0.5
9.0±0.5
7.5±0.8
5.0 Nom.
0±2.0
0±1.0
+1.0
18.0 −0.5
5.0 Min.
0.6±0.3
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
1.5 Max.
3.0 Max.
20.0 Min.
3.0 Max.
6.0 Max.
SE : 19.0 Min.
Please refer to the above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
36
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆10V, 12V, 14V, 10SE, 12SE, 14SE : TYPE TBB(T7) (Straight Lead, 15mm Pitch)
D
P
T
P2
Δh
H
H2
ΔP
P1
F0
1.0 MAX.
W
J
W0
W1
H0
φd
W2
H1
φD0
P0
F1
Type
10V
15.5
37.0
Height
(H Max.)
Component Height (H1 Max.)
t2
12V
17.0
39.0
14V
19.0
41.0
10SE
18.5
40.0
12SE
23.0
45.0
t1
14SE
24.0
46.0
◆TYPE TBB(T7)
Parameter
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole center to component center
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
Hold down tape position
Height from tape center to component base
Component height
Lead position
Code
D
T
φd
P
P0
φD0
P1
P2
W1
F0
F1
Δh
ΔP
W
W0
t1
t2
W2
H0
H1
H2
J
Dimensions (mm)
0.8±0.05
15.0±1.0
15.0±0.3
4.0±0.2
3.75±0.5
7.5±1.3
9.0±0.5
7.5±0.8
5.0 Nom.
0±2.0
0±1.3
18.0± 1.0
0.5
5.0 Min.
0.6±0.3
Note
Refer to the applicable detail spec (14V : 15.0 Max.)
Refer to the applicable detail spec
14SE : 30.0 ±1.0 mm
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
1.5 Max.
3.0 Max.
20.0± 1.5
1.0
3.0 Max.
6.0 Max.
Please refer to above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
37
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
TAPING SPECIFICATIONS
◆10V, 12V, 14V, 10SE, 12SE, 14SE : TYPE TFB(T8) (Crimped Lead, 15mm Pitch)
P
T
P2
ΔP
Δh
H
D
P1
F0
1.0 MAX.
W
J
W0
W1
H0
φd
W2
H1
φD0
F1
P0
Type
10V
17.5
35.0
Height
(H Max.)
Component Height (H1 Max.)
12V
19.0
36.0
14V
21.0
38.0
10SE
21.0
38.0
12SE
24.0
41.0
t2
t1
14SE
25.0
42.0
◆TYPE TFB(T8)
Parameter
Diameter of component
Thickness of component
Lead diameter
Pitch of component
Feed hole pitch
Feed hole diameter
Feed hole center to lead
Feed hole center to component center
Feed hole position
Lead spacing
Deviation across tape
Deviation along tape
Carrier tape width
Hold down tape width
Tape thickness
Total tape thickness
Hold down tape position
Seating plane height
Component height
Lead position
Code
D
T
φd
P
P0
φD0
P1
P2
W1
F0
F1
Δh
ΔP
W
W0
t1
t2
W2
H
H0
H1
J
Dimensions (mm)
0.8±0.05
15.0±1.0
15.0±0.3
4.0±0.2
3.75±0.5
7.5±1.3
9.0±0.5
7.5±0.8
5.0 Nom.
0±2.0
0±1.3
18.0± 1.0
0.5
5.0 Min.
0.6±0.3
Note
Refer to the applicable detail spec (14V : 15.0 Max.)
Refer to the applicable detail spec
14SE : 30.0±1.0 mm
Cumulative pitch error : ±1 mm/20 pitches
Measured at the upper end of tape
1.5 Max.
3.0 Max.
16.0±1.0
6.0 Max.
10V ; 17.5 Max.
14V ; 21.0 Max.
Please refer to above list
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
38
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
PACKAGING
◆Packaging
B o x
B
Configuration
H
W
TFA, TBA
(T15, T25)
Dimensions
(mm)
W
H
B
5V, 7V, 9V, 9H
325±5
47±3
280±10
TEA, TFA, TAA, TBA
(T1, T15, T2, T25)
10V, 12V, 14V, 12H, 15H
330±5
57±3
315±10
10SE, 12SE, 14SE
340 max.
65 max.
360 max.
TFB, TBB, TLB
(T8, T7, T71)
10V, 12V, 10SE, 12SE, 14SE
340 max.
65 max.
360 max.
◆Packaging Quantity
Type
Taping Code
5V,7V,9V,9H
10V,12V,14V
10SE,12SE,14SE
12H,15H
10V,12V,14V
10SE
12SE,14SE
TFA, TBA(T15, T25)
TEA, TFA, TAA, TBA
(T1, T15, T2, T25)
TFB, TBB
(T8, T7)
150K∼271K 331K∼621K
1500
800
600
800
1000
1000
500
1000
500
※ 500
1000
800
400
NOTE : The code (T1, T15, T2, T25, T8, T7) are the old taping code
※ : Only in TNR10SE621K-T**, packing quantity is 400.
◆Others
1) On the box or the reel, the following are noted.
1. Part number
2. Lot number
3. Quantity
4. Country of origin
2) Minimum order quantity shall be the packaging quantity per one box one reel.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
39
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
PACKAGING
MINIMUM ORDER QUANTITY
Please order by units of minimum order quantity.
◆Disk Type
Series
Type
5V, 7V, 9V
10V, 12V
V
14V
20V
SE
H
GF
20SE
9H, 12H, 15H
23H
15GF
23GF
Varistor Voltage Range (V) Straight Lead Quantity (pcs) Formed/Cut Lead Quantity (pcs)
All Voltage Range
All Voltage Range
15∼1200
1500∼1800
18∼1100
1200∼1800
All Voltage Range
All Voltage Range
All Voltage Range
All Voltage Range
All Voltage Range
100
100
100
50
50
25
50
100
50
50
25
100
100
100
50
50
25
50
100
50
-
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
40
CAT. No. E1006V
Metal Oxide Varistors TNRTM
Disk Type
41
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
RoHS
Compliant
◆FEATURES
●Large
surge capability (the surge current ratings of TNR V series, by 8/20 µs, are about two
times larger than TNR G series).
● Large energy capability (1.5 time larger than TNR G series).
● One rank smaller TNR V has same peak current as TNR G.
● Excellent voltage non-linear coefficient.
Low clamping voltage.
● Symmetrical V-I characteristics (No polarity).
● Fast response.
● Stable characteristics against repeated surges.
● Superior temperature characteristics.
● High reliability
● UL, CSA and VDE recognized components
UL 1449 3rd File : E323623
CSA
File : LR97864
VDE
File : 118623
◆APPLICATIONS
● Protection
for semiconductors from over voltage.
for electronic instruments from lightning surges.
● Absorption of on-off surges from motors and relays.
● Protection
Operating Temperature Range: -40 to +85℃
Storage Temperature Range: -50 to +125℃
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
T N D C A V - A A A K B AM A A A N
Design Code
Lead Forming / Taping
Packing Style⑦
Varistor Volt. Tolerance⑥
Varistor Voltage⑤
Series④
Element Diameter③
Product Form②
Category①
①Category
T
Metal Oxide
Varistors
TNR
⑤Varistor Voltage
ND
②Product Form
Disk Type
The first two digits are significant figures
and the third one denotes the number of
following zeros.
③Element Diameter
05
07
09
10
12
14
20
⑥Varistor Volt. Tolerance
K
±10%
V-
φ 5 mm
φ 7 mm
φ 9 mm
φ10 mm
φ12 mm
φ14 mm
φ20 mm
B
T
④Series
V Series
⑦Packing Style
Bulk
Taping
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
42
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆STANDARD RATINGS (Type 5V)
Previous
Part Number
Part Number
(Just for your reference)
TND05V-180KB00AAA0
TND05V-220KB00AAA0
TND05V-270KB00AAA0
TND05V-330KB00AAA0
TND05V-390KB00AAA0
TND05V-470KB00AAA0
TND05V-560KB00AAA0
TND05V-680KB00AAA0
TND05V-820KB00AAA0
TND05V-101KB00AAA0
TND05V-121KB00AAA0
TND05V-151KB00AAA0
TND05V-181KB00AAA0
TND05V-201KB00AAA0
TND05V-221KB00AAA0
TND05V-241KB00AAA0
TND05V-271KB00AAA0
TND05V-331KB00AAA0
TND05V-361KB00AAA0
TND05V-391KB00AAA0
TND05V-431KB00AAA0
TND05V-471KB00AAA0
TNR5V180K
TNR5V220K
TNR5V270K
TNR5V330K
TNR5V390K
TNR5V470K
TNR5V560K
TNR5V680K
TNR5V820K
TNR5V101K
TNR5V121K
TNR5V151K
TNR5V181K
TNR5V201K
TNR5V221K
TNR5V241K
TNR5V271K
TNR5V331K
TNR5V361K
TNR5V391K
TNR5V431K
TNR5V471K
Max. Allowable
Voltage
AC (Vrms) DC (V)
14
11
18
14
22
17
26
20
30
25
37
30
44
35
55
40
65
50
85
60
100
75
125
95
145
110
170
130
180
140
200
150
225
175
270
210
300
230
320
250
350
275
385
300
Maximum Ratings
Max. Peak
Current
8/20µs(A)
250A/1 time
125A/2 times
800A/1 time
600A/2 times
Max.
Energy
2ms(J)
0.4
0.5
0.7
0.8
0.9
1.1
1.3
1.6
2.5
3
3.5
4.5
5
6
6.5
7.5
8
9.5
11
12
13.5
15
Max.
Clamping
Voltage
Rated
Wattage
(W)
(A)
0.01
1
0.1
Capacitance
Typical Varistor Voltage
V0.1mA
@1kHz
(V)
40
48
60
73
86
104
123
150
145
175
210
260
325
355
380
415
475
570
620
675
745
810
5
(pF)
2540
2090
1790
1480
1310
1140
1000
870
400
350
310
270
190
110
110
100
90
80
80
70
70
60
(V)
18 ( 16∼ 20)
22 ( 20∼ 24)
27 ( 24∼ 30)
33 ( 30∼ 36)
39 ( 35∼ 43)
47 ( 42∼ 52)
56 ( 50∼ 62)
68 ( 61∼ 75)
82 ( 74∼ 90)
100 ( 90∼110)
120 (108∼132)
150 (135∼165)
180 (162∼198)
200 (185∼225)
220 (198∼242)
240 (216∼264)
270 (247∼303)
330 (297∼363)
360 (324∼396)
390 (351∼429)
430 (387∼473)
470 (423∼517)
T
Max.
(mm)
4.5
4.1
4.3
4.5
4.8
4.3
4.4
4.5
4.6
4.8
5.1
5.3
5.4
5.6
5.8
◆DIMENSIONS [mm]
T
D
H
Size, Ratings
CSA Mark
Lot. No.
5V271K
TNR
Trade mark
UL mark
L
W
φd
D
Max.
H
Max.
7.5
10.0
T
Max.
Ref. to
RATINGS
L
Min.
±0.05
φd
±1.0
20.0
0.6
5.0
W
◆V-I CURVE
500
400
TNR VOLT-AMPERE CHARACTERISTICS (TND05V-180K∼TND05V-680K) at 20℃
300
MAX.
2000
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
1500
05V-680K
05V-560K
05V-470K
05V-390K
05V-330K
05V-270K
05V-220K
05V-180K
200
150
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
05V-471K
05V-431K
05V-391K
05V-361K
05V-331K
800
700
600
500
05V-271K
05V-241K
05V-221K
05V-201K
400
05V-121K
05V-151K
05V-101K
300
05V-820K
200
VOLTAGE (V)
30
VOLTAGE (V)
MAX.
1000
100
80
70
60
50
40
20
15
10
8
7
6
5
4
3 -7
10
TNR VOLT-AMPERE CHARACTERISTICS (TND05V-820K∼TND05V-471K) at 20℃
150
100
80
70
60
50
40
-6
-5
10
10
Direct Current (A)
-4
10
-3
-2
-1
0
10
10
10
10
8/20µsec Impulse Current (A)
1
10
2
10
30 -7
10
250A
-6
-5
10
10
Direct Current (A)
-4
10
-3
10
-2
-1
0
10
10
10
8/20µsec Impulse Current (A)
1
10
2
800A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
43
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆STANDARD RATINGS (Type 7V)
Part Number
TND07V-150KB00AAA0
TND07V-180KB00AAA0
TND07V-220KB00AAA0
TND07V-270KB00AAA0
TND07V-330KB00AAA0
TND07V-390KB00AAA0
TND07V-470KB00AAA0
TND07V-560KB00AAA0
TND07V-680KB00AAA0
TND07V-820KB00AAA0
TND07V-101KB00AAA0
TND07V-121KB00AAA0
TND07V-151KB00AAA0
TND07V-181KB00AAA0
TND07V-201KB00AAA0
TND07V-221KB00AAA0
TND07V-241KB00AAA0
TND07V-271KB00AAA0
TND07V-331KB00AAA0
TND07V-361KB00AAA0
TND07V-391KB00AAA0
TND07V-431KB00AAA0
TND07V-471KB00AAA0
TND07V-511KB00AAA0
Previous
Part Number
(Just for your reference)
TNR7V150K
TNR7V180K
TNR7V220K
TNR7V270K
TNR7V330K
TNR7V390K
TNR7V470K
TNR7V560K
TNR7V680K
TNR7V820K
TNR7V101K
TNR7V121K
TNR7V151K
TNR7V181K
TNR7V201K
TNR7V221K
TNR7V241K
TNR7V271K
TNR7V331K
TNR7V361K
TNR7V391K
TNR7V431K
TNR7V471K
TNR7V511K
Max. Allowable
Voltage
AC (Vrms) DC (V)
8
11
14
17
20
25
30
35
40
50
60
75
95
110
130
140
150
175
210
230
250
275
300
320
12
14
18
22
26
30
37
44
55
65
85
100
125
145
170
180
200
225
270
300
320
350
385
410
Maximum Ratings
Max. Peak
Current
8/20µs(A)
500A/1 time
250A/2 times
1750A/1 time
1250A/2 times
Max.
Energy
2ms(J)
0.7
0.9
1.1
1.3
1.6
1.9
2.3
2.7
3.3
5
6
7
9
11
12.5
13.5
15
17
20
23
25
27.5
30
32
Rated
Wattage
(W)
Max.
Clamping
Voltage
(A)
0.02
2.5
0.25
10
(V)
30
36
43
53
65
77
93
110
135
135
165
200
250
300
340
360
395
455
545
595
650
710
775
845
Capacitance
Typical Varistor Voltage
V1mA
1kHz
@
(pF)
4600
3800
3200
2800
2300
2100
1900
1700
1500
800
700
650
600
430
250
230
210
190
160
150
140
130
120
110
(V)
15 ( 13∼ 17)
18 ( 16∼ 20)
22 ( 20∼ 24)
27 ( 24∼ 30)
33 ( 30∼ 36)
39 ( 35∼ 43)
47 ( 42∼ 52)
56 ( 50∼ 62)
68 ( 61∼ 75)
82 ( 74∼ 90)
100 ( 90∼110)
120 (108∼132)
150 (135∼165)
180 (162∼198)
200 (185∼225)
220 (198∼242)
240 (216∼264)
270 (247∼303)
330 (297∼363)
360 (324∼396)
390 (351∼429)
430 (387∼473)
470 (423∼517)
510 (459∼561)
T
Max.
(mm)
4.5
4.5
4.6
4.7
4.9
4.8
4.9
5.0
5.2
4.1
4.3
4.5
4.8
4.3
4.4
4.5
4.6
4.8
5.1
5.3
5.4
5.6
5.8
6.0
◆DIMENSIONS [mm]
φd
W
Size, Ratings
CSA Mark
Lot. No.
L
7V241K
TNR
Trade mark
UL mark
H
T
D
D
Max.
H
Max.
8.5
11.5
T
Max.
Ref. to
RATINGS
φd
W
L
Min.
±0.05
±1.0
20.0
0.6
5.0
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
44
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 7V)
500
400
TNR VOLT-AMPERE CHARACTERISTICS (TND07V-150K∼TND07V-680K) at 20℃
MAX.
300
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
07V-680K
07V-560K
07V-470K
07V-390K
07V-330K
07V-270K
07V-220K
07V-180K
07V-150K
200
150
100
80
70
60
50
40
VOLTAGE (V)
30
20
15
10
8
7
6
5
4
3 -6
10
2000
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
500A
2
10
10
10
10
8/20µsec Impulse Current (A)
10
TNR VOLT-AMPERE CHARACTERISTICS (TND07V-820K∼TND07V-511K) at 20℃
1500
MAX.
07V-511K
07V-471K
07V-431K
07V-391K
07V-361K
07V-331K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
1000
800
700
600
500
07V-271K
07V-241K
07V-221K
07V-201K
07V-151K
07V-121K
400
07V-101K
07V-820K
300
200
VOLTAGE (V)
150
100
80
70
60
50
40
30 -6
10
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
10
10
10
10
8/20µsec Impulse Current (A)
2
10
3
1750A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
45
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆RATINGS (Type 9V)
Part Number
TND09V-150KB00AAA0
TND09V-180KB00AAA0
TND09V-220KB00AAA0
TND09V-270KB00AAA0
TND09V-330KB00AAA0
TND09V-390KB00AAA0
TND09V-470KB00AAA0
TND09V-560KB00AAA0
TND09V-680KB00AAA0
TND09V-820KB00AAA0
TND09V-101KB00AAA0
TND09V-121KB00AAA0
TND09V-151KB00AAA0
TND09V-181KB00AAA0
TND09V-201KB00AAA0
TND09V-221KB00AAA0
TND09V-241KB00AAA0
TND09V-271KB00AAA0
TND09V-331KB00AAA0
TND09V-361KB00AAA0
TND09V-391KB00AAA0
TND09V-431KB00AAA0
TND09V-471KB00AAA0
TND09V-511KB00AAA0
Previous
Part Number
(Just for your reference)
TNR9V150K
TNR9V180K
TNR9V220K
TNR9V270K
TNR9V330K
TNR9V390K
TNR9V470K
TNR9V560K
TNR9V680K
TNR9V820K
TNR9V101K
TNR9V121K
TNR9V151K
TNR9V181K
TNR9V201K
TNR9V221K
TNR9V241K
TNR9V271K
TNR9V331K
TNR9V361K
TNR9V391K
TNR9V431K
TNR9V471K
TNR9V511K
Max. Allowable
Voltage
AC (Vrms) DC (V)
8
11
14
17
20
25
30
35
40
50
60
75
95
110
130
140
150
175
210
230
250
275
300
320
12
14
18
22
26
30
37
44
55
65
85
100
125
145
170
180
200
225
270
300
320
350
385
410
Maximum Ratings
Max. Peak
Current
8/20µs(A)
800A/1 time
400A/2 times
3000A/1 time
2000A/2 times
Max.
Energy
2ms(J)
2.0
2.2
2.6
3.2
4.0
4.7
5.6
6.7
8.2
10
12
14.5
18
22
25
27.5
30
35
42
45
50
55
60
67
Max.
Clamping
Voltage
Rated
Wattage
(W)
(A)
0.02
5
0.25
25
(V)
30
36
43
53
65
77
93
110
135
135
165
200
250
300
340
360
395
455
545
595
650
710
775
845
Capacitance
Typical Varistor Voltage
V1mA
1kHz
@
(pF)
9600
8000
7000
6000
5000
4500
4000
3500
3200
1700
1600
1400
1300
900
500
450
400
350
300
280
260
240
220
210
(V)
15 ( 13∼ 17)
18 ( 16∼ 20)
22 ( 20∼ 24)
27 ( 24∼ 30)
33 ( 30∼ 36)
39 ( 35∼ 43)
47 ( 42∼ 52)
56 ( 50∼ 62)
68 ( 61∼ 75)
82 ( 74∼ 90)
100 ( 90∼110)
120 (108∼132)
150 (135∼165)
180 (162∼198)
200 (185∼225)
220 (198∼242)
240 (216∼264)
270 (247∼303)
330 (297∼363)
360 (324∼396)
390 (351∼429)
430 (387∼473)
470 (423∼517)
510 (459∼561)
T
Max.
(mm)
3.8
3.8
4.0
4.2
4.5
4.0
4.2
4.4
4.5
3.8
3.9
4.1
4.4
4.0
4.1
4.2
4.3
4.5
4.8
5.0
5.1
5.3
5.6
5.8
◆DIMENSIONS [mm]
φd
W
Size, Ratings
CSA Mark
Lot. No.
L
9V241K
TNR
Trade mark
UL mark
H
T
D
D
Max.
H
Max.
11.5
14.5
T
Max.
Ref. to
RATINGS
φd
L
Min.
±0.05
±1.0
W
20.0
0.6
5.0
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
46
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 9V)
500
400
TNR VOLT-AMPERE CHARACTERISTICS(TND09V-150K∼TND09V-680K) at 20℃
MAX.
300
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
09V-680K
09V-560K
09V-470K
200
09V-390K
09V-330K
09V-270K
09V-220K
09V-180K
09V-150K
150
100
80
70
60
50
40
VOLTAGE (V)
30
20
15
10
8
7
6
5
4
3 -6
10
5000
4000
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
2
10
10
10
10
8/20µsec Impulse Current (A)
3
10
800A
10
TNR VOLT-AMPERE CHARACTERISTICS (TND09V-820K∼TND09V-182K) at 20℃
3000
MAX.
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
2000
1500
09V-511K
09V-471K
09V-431K
09V-391K
09V-361K
09V-331K
09V-271K
09V-241K
09V-221K
09V-201K
09V-151K
1000
800
700
600
500
400
09V-121K
09V-101K
300
VOLTAGE (V)
09V-820K
200
150
100
80
70
60
50
40
30
-6
10
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
10
10
10
10
8/20µsec Impulse Current (A)
2
10
3
3000A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
47
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆RATINGS (Type 10V)
Maximum Ratings
Max. Allowable
Max.
Max. Peak
Voltage
Energy
Current
AC (Vrms) DC (V) 8/20µs(A) 2ms(J)
12
8
2.0
14
11
2.2
18
14
2.6
22 1000A/1 time
17
3.2
26
20
4.0
30 500A/2 times
25
4.7
37
30
5.6
44
35
6.7
55
40
8.2
65
50
10
85
60
12
100
75
14.5
125
95
18
145
110
22
170
130
25
180
140
27.5
200
150
30
225
175
35
270
210
42
300
230
45
320 3500A/1 time
250
50
350
275
55
385 2500A/2 times
300
60
410
320
67
460
350
67
505
385
67
560
420
67
615
460
70
670
510
80
745
550
90
825
625
100
895
680
110
980
720
120
1220
860
150
1465
1000
183
Previous
Part Number
Part Number
(Just for your reference)
TND10V-150KB00AAA0
TND10V-180KB00AAA0
TND10V-220KB00AAA0
TND10V-270KB00AAA0
TND10V-330KB00AAA0
TND10V-390KB00AAA0
TND10V-470KB00AAA0
TND10V-560KB00AAA0
TND10V-680KB00AAA0
TND10V-820KB00AAA0
TND10V-101KB00AAA0
TND10V-121KB00AAA0
TND10V-151KB00AAA0
TND10V-181KB00AAA0
TND10V-201KB00AAA0
TND10V-221KB00AAA0
TND10V-241KB00AAA0
TND10V-271KB00AAA0
TND10V-331KB00AAA0
TND10V-361KB00AAA0
TND10V-391KB00AAA0
TND10V-431KB00AAA0
TND10V-471KB00AAA0
TND10V-511KB00AAA0
TND10V-561KB00AAA0
TND10V-621KB00AAA0
TND10V-681KB00AAA0
TND10V-751KB00AAA0
TND10V-821KB00AAA0
TND10V-911KB00AAA0
TND10V-102KB00AAA0
TND10V-112KB00AAA0
TND10V-122KB00AAA0
TND10V-152KB00AAA0
TND10V-182KB00AAA0
TNR10V150K
TNR10V180K
TNR10V220K
TNR10V270K
TNR10V330K
TNR10V390K
TNR10V470K
TNR10V560K
TNR10V680K
TNR10V820K
TNR10V101K
TNR10V121K
TNR10V151K
TNR10V181K
TNR10V201K
TNR10V221K
TNR10V241K
TNR10V271K
TNR10V331K
TNR10V361K
TNR10V391K
TNR10V431K
TNR10V471K
TNR10V511K
TNR10V561K
TNR10V621K
TNR10V681K
TNR10V751K
TNR10V821K
TNR10V911K
TNR10V102K
TNR10V112K
TNR10V122K
TNR10V152K
TNR10V182K
Max. Capacitance
Clamping Typical
Rated
Wattage Voltage
@1kHz
(W)
(A) (V)
(pF)
9600
30
8000
36
7000
43
6000
53
5000
65
0.05
5
4500
77
4000
93
3500
110
3200
135
1700
135
1600
165
200
1400
250
1300
300
900
340
500
360
450
395
400
455
350
545
300
595
280
650
260
240
0.4
25 710
775
220
845
210
922
195
1025
180
1120
165
1240
150
1355
140
1500
125
1650
115
1815
105
1950
95
2440
85
2970
70
Varistor Voltage
V1mA
W2
E
T
Max. ±1.0 reference
(V)
15 ( 13∼ 17)
18 ( 16∼ 20)
22 ( 20∼ 24)
27 ( 24∼ 30)
33 ( 30∼ 36)
39 ( 35∼ 43)
47 ( 42∼ 52)
56 ( 50∼ 62)
68 ( 61∼ 75)
82 ( 74∼ 90)
100 ( 90∼ 110)
120 ( 108∼ 132)
150 ( 135∼ 165)
180 ( 162∼ 198)
200 ( 185∼ 225)
220 ( 198∼ 242)
240 ( 216∼ 264)
270 ( 247∼ 303)
330 ( 297∼ 363)
360 ( 324∼ 396)
390 ( 351∼ 429)
430 ( 387∼ 473)
470 ( 423∼ 517)
510 ( 459∼ 561)
560 ( 504∼ 616)
620 ( 558∼ 682)
680 ( 612∼ 748)
750 ( 675∼ 825)
820 ( 738∼ 902)
910 ( 819∼1001)
1000 ( 900∼1100)
1100 ( 990∼1210)
1200 (1080∼1320)
1500 (1350∼1650)
1800 (1700∼1980)
(mm) (mm) (mm)
4.5
7.6
1.0
4.6
7.6
1.1
4.7
7.6
1.2
4.8
7.6
1.3
5.0
7.6
1.5
4.9
7.6
1.3
5.0
7.6
1.4
5.1
7.7
1.6
5.3
7.7
1.8
4.5
7.6
1.1
4.7
7.6
1.3
4.9
7.6
1.4
5.2
7.7
1.7
4.7
7.6
1.1
4.8
7.6
1.2
4.9
7.6
1.3
5.0
7.6
1.3
5.2
7.6
1.4
5.5
7.7
1.6
5.7
7.7
1.8
5.8
7.7
1.9
6.0
7.8
2.0
6.2
7.8
2.1
6.4
7.8
2.3
6.7
7.9
2.5
7.1
8.0
2.7
7.4
8.0
2.9
7.8
8.1
3.1
8.1
8.2
3.4
8.6
8.4
3.7
9.1
8.5
4.0
9.7
8.7
4.4
10.5 4.7* 8.9**
12.4 5.8* 9.5**
14.4 6.9* 10.2**
*E±2 **W2±2
◆DIMENSIONS [mm]
Trade mark
UL mark
Size, Ratings
CSA Mark
Lot. No.
10V241K
TNR
H
T
D
E
Part Number
W
L
φd
TND10V-150K to TND10V-511K
TND10V-561K to TND10V-112K
TND10V-122K to TND10V-182K
D
Max.
11.5
12.5
13.5
H
Max.
14.5
15.5
16.5
T
Max.
L
Min.
±0.05
Ref. to
RATINGS
20.0
0.8
φd
W
±1.0
7.5
2
W
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
48
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 10V)
500
400
TNR VOLT-AMPERE CHARACTERISTICS (TND10V-150K∼TND10V-680K) at 20℃
MAX.
300
10V-680K
10V-560K
10V-470K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
10V-390K
10V-330K
10V-270K
10V-220K
10V-180K
10V-150K
200
150
100
80
70
60
50
40
VOLTAGE (V)
30
20
15
10
8
7
6
5
4
3 -6
10
5000
4000
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
2
10
10
10
10
8/20µsec Impulse Current (A)
3
10
10
TNR VOLT-AMPERE CHARACTERISTICS (TND10V-820K∼TND10V-182K) at 20℃
3000
MAX.
10V-182K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
1000A
10V-112K
10V-102K
10V-911K
10V-821K
10V-751K
10V-681K
10V-621K
10V-561K
10V-511K
10V-471K
10V-431K
10V-391K
10V-361K
10V-331K
10V-271K
10V-241K
10V-221K
10V-201K
10V-151K
10V-121K
10V-101K
2000
1500
1000
800
700
600
500
400
10V-820K
VOLTAGE (V)
300
200
150
100
80
70
60
50
40
30
-6
10
-5
-4
10
10
Direct Current (A)
-3
10
-2
-1
0
1
10
10
10
10
8/20µsec Impulse Current (A)
2
10
3
3500A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
49
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆RATINGS (Type 12V)
Maximum Ratings
Max. Allowable
Max.
Max. Peak
Voltage
Energy
Current
AC (Vrms) DC (V) 8/20µs(A) 2ms(J)
350
275
55
385
300
60
410
320
67
460
350
67
505
385
67
560 4,200A/1 time
420
67
615
460
70
670 3,000A/2 times
510
80
745
550
90
825
625
100
895
680
110
980
720
120
1220
860
150
1465
1000
183
Previous
Part Number
Part Number
(Just for your reference)
TND12V-431KB00AAA0
TND12V-471KB00AAA0
TND12V-511KB00AAA0
TND12V-561KB00AAA0
TND12V-621KB00AAA0
TND12V-681KB00AAA0
TND12V-751KB00AAA0
TND12V-821KB00AAA0
TND12V-911KB00AAA0
TND12V-102KB00AAA0
TND12V-112KB00AAA0
TND12V-122KB00AAA0
TND12V-152KB00AAA0
TND12V-182KB00AAA0
TNR12V431K
TNR12V471K
TNR12V511K
TNR12V561K
TNR12V621K
TNR12V681K
TNR12V751K
TNR12V821K
TNR12V911K
TNR12V102K
TNR12V112K
TNR12V122K
TNR12V152K
TNR12V182K
Max. Capacitance
E
T
Varistor Voltage
Clamping Typical
Rated
Max. ±1.0
V
1mA
Voltage
@1kHz
Wattage
(W)
(mm) (mm)
(A) (V)
(pF)
(V)
430 ( 387 ∼ 473) 6.0
710
375
2.0
775
345
470 ( 423 ∼ 517) 6.2
2.1
845
330
510 ( 459 ∼ 561) 6.4
2.3
922
305
560 ( 504 ∼ 616) 6.7
2.5
1025
280
620 ( 558 ∼ 682) 7.1
2.7
1120
260
680 ( 612 ∼ 748) 7.4
2.9
235
0.4
25 1240
750 ( 675 ∼ 825) 7.8
3.1
1355
220
820 ( 738 ∼ 902) 8.1
3.4
1500
195
910 ( 819 ∼ 1001) 8.6
3.7
1650
180
1000 ( 900 ∼ 1100) 9.1
4.0
1815
165
1100 ( 990 ∼ 1210) 9.7
4.4
1950
150
1200 (1080 ∼ 1320) 10.5
4.7*
2440
135
1500 (1350 ∼ 1650) 12.4
5.8*
2970
110
6.9*
1800 (1700 ∼ 1980) 14.4
W2
reference
(mm)
7.8
7.8
7.8
7.9
8.0
8.0
8.1
8.2
8.4
8.5
8.7
8.9**
9.5**
10.2**
*E±2 **W2±2
◆DIMENSIONS [mm]
Size, Ratings
CSA Mark
Lot. No.
12V471K
TNR
Trade mark
UL mark
H
T
D
E
Part Number
W
L
φd
TND12V-431K to TND12V-102K
TND12V-112K
TND12V-122K
TND12V-152K to TND12V-182K
D
Max.
H
Max.
T
Max.
L
Min.
±0.05
15.0
18.0
Ref. to
RATINGS
20
0.8
16.0
19.0
14.0
17.0
φd
W
±1.0
7.5
2
W
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
50
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 12V)
5000
4000
TNR VOLT-AMPERE CHARACTERISTICS (TND12V-431K∼TND12V-182K) at 20℃
3000
MAX.
12V-182K
12V-152K
12V-122K
12V-112K
12V-102K
12V-911K
12V-821K
12V-751K
12V-681K
12V-621K
12V-561K
12V-511K
12V-471K
12V-431K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
2000
1500
1000
800
700
600
500
400
VOLTAGE (V)
300
200
150
100
80
70
60
50
40
30
-6
10
-5
-4
10
10
Direct Current (A)
-3
10
-2
10
-1
0
1
10
10
10
8/20µsec Impulse Current (A)
2
10
3
10
4200A
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
51
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆RATINGS (Type 14V)
Previous
Part Number
Part Number
Max. Allowable
Voltage
AC (Vrms) DC (V)
(Just for your reference)
TND14V-150KB00AAA0
TND14V-180KB00AAA0
TND14V-220KB00AAA0
TND14V-270KB00AAA0
TND14V-330KB00AAA0
TND14V-390KB00AAA0
TND14V-470KB00AAA0
TND14V-560KB00AAA0
TND14V-680KB00AAA0
TND14V-820KB00AAA0
TND14V-101KB00AAA0
TND14V-121KB00AAA0
TND14V-151KB00AAA0
TND14V-181KB00AAA0
TND14V-201KB00AAA0
TND14V-221KB00AAA0
TND14V-241KB00AAA0
TND14V-271KB00AAA0
TND14V-331KB00AAA0
TND14V-361KB00AAA0
TND14V-391KB00AAA0
TND14V-431KB00AAA0
TND14V-471KB00AAA0
TND14V-511KB00AAA0
TND14V-561KB00AAA0
TND14V-621KB00AAA0
TND14V-681KB00AAA0
TND14V-751KB00AAA0
TND14V-821KB00AAA0
TND14V-911KB00AAA0
TND14V-102KB00AAA0
TND14V-112KB00AAA0
TND14V-122KB00AAA0
TND14V-152KB00AAA0
TND14V-182KB00AAA0
TNR14V150K
TNR14V180K
TNR14V220K
TNR14V270K
TNR14V330K
TNR14V390K
TNR14V470K
TNR14V560K
TNR14V680K
TNR14V820K
TNR14V101K
TNR14V121K
TNR14V151K
TNR14V181K
TNR14V201K
TNR14V221K
TNR14V241K
TNR14V271K
TNR14V331K
TNR14V361K
TNR14V391K
TNR14V431K
TNR14V471K
TNR14V511K
TNR14V561K
TNR14V621K
TNR14V681K
TNR14V751K
TNR14V821K
TNR14V911K
TNR14V102K
TNR14V112K
TNR14V122K
TNR14V152K
TNR14V182K
8
11
14
17
20
25
30
35
40
50
60
75
95
110
130
140
150
175
210
230
250
275
300
320
350
385
420
460
510
550
625
680
720
860
1000
12
14
18
22
26
30
37
44
55
65
85
100
125
145
170
180
200
225
270
300
320
350
385
410
460
505
560
615
670
745
825
895
980
1220
1465
Maximum Ratings
Max. Peak
Current
8/20µs(A)
2000A/1 time
1000A/2 times
6000A/1 time
5000A/2 times
5000A/1 time
4500A/2 times
Max.
Energy
2ms(J)
3.6
4.3
5.3
6.5
7.9
9.4
11
13
16
20
25
30
37
45
50
55
60
70
80
90
100
110
125
136
136
136
136
150
165
180
200
220
240
300
360
Max. Capacitance
Clamping Typical
Rated
Voltage
@1kHz
Wattage
(W)
(A) (V)
(pF)
30 19500
36 16500
43 13500
53 12000
65 10000
0.1
10
9000
77
8000
93
7500
110
6500
135
3000
135
2700
165
2500
200
2300
250
1650
300
950
340
850
360
800
395
700
455
600
545
550
595
500
650
460
710
0.6
50
420
775
390
845
360
922
330
1025
310
1120
280
1240
250
1355
230
1500
210
1650
190
1815
170
1950
150
2440
120
2970
Varistor Voltage
V1mA
T
E
W2
Max. ±1.0 Reference
(V)
(mm) (mm) (mm)
4.5
15 ( 13∼ 17)
7.6
1.0
4.6
7.6
18 ( 16∼ 20)
1.1
4.7
7.6
22 ( 20∼ 24)
1.2
4.8
7.6
27 ( 24∼ 30)
1.4
5.0
7.7
33 ( 30∼ 36)
1.6
4.9
7.6
39 ( 35∼ 43)
1.3
5.0
7.6
47 ( 42∼ 52)
1.5
5.1
7.7
56 ( 50∼ 62)
1.7
5.3
7.8
68 ( 61∼ 75)
2.0
4.5
7.6
82 ( 74∼ 90)
1.1
4.7
7.6
100 ( 90∼ 110)
1.3
4.9
7.6
120 ( 108∼ 132)
1.4
5.2
7.7
150 ( 135∼ 165)
1.7
4.7
7.6
180 ( 162∼ 198)
1.1
4.8
7.6
200 ( 185∼ 225)
1.2
4.9
7.6
220 ( 198∼ 242)
1.3
5.0
7.6
240 ( 216∼ 264)
1.4
5.2
7.6
270 ( 247∼ 303)
1.5
5.5
7.7
330 ( 297∼ 363)
1.7
5.7
7.7
360 ( 324∼ 396)
1.8
5.8
7.7
390 ( 351∼ 429)
1.9
6.0
7.8
430 ( 387∼ 473)
2.1
6.2
7.8
470 ( 423∼ 517)
2.2
6.4
7.9
510 ( 459∼ 561)
2.4
6.7
7.9
560 ( 504∼ 616)
2.6
7.1
8.0
620 ( 558∼ 682)
2.8
7.4
8.1
680 ( 612∼ 748)
3.0
7.8
8.2
750 ( 675∼ 825)
3.3
8.1
8.3
820 ( 738∼ 902)
3.5
8.6
8.5
910 ( 819∼1001)
3.9
9.1
8.6
1000 ( 900∼1100)
4.2
9.7
8.8
1100 ( 990∼1210)
4.6
1200 (1080∼1320) 10.5 4.9* 9.0**
1500 (1350∼1650) 12.4 6.0* 9.6**
1800 (1700∼1980) 14.4 7.1* 10.3**
*E±2 **W2±2
◆DIMENSIONS [mm]
Size, Ratings
CSA Mark
Lot. No.
14V241K
TNR
Trade mark
UL mark
H
T
D
E
Part Number
W
L
φd
TND14V-150K to TND14V-511K
TND14V-561K to TND14V-112K
TND14V-122K to TND14V-182K
D
Max.
15.5
16.0
17.0
H
Max.
18.5
19.0
20.5
φd
T
Max.
L
Min.
±0.05
Ref. to
RATINGS
20
0.8
W
±1.0
7.5
2
W
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
52
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 14V)
500
400
300
TNR VOLT-AMPERE CHARACTERISTICS (TND14V-150K∼TND14V-680K) at 20℃
MAX.
14V-680K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
14V-560K
14V-470K
14V-390K
14V-330K
14V-270K
14V-220K
14V-180K
14V-150K
200
150
100
80
70
60
50
40
VOLTAGE (V)
30
20
15
10
8
7
6
5
4
3
-6
-5
-4
10
10
10
Direct Current (A)
5000
4000
3000
-3
10
-2
-1
1
0
2
10
10
10
10
8/20µsec Impulse Current (A)
3
10
10
TNR VOLT-AMPERE CHARACTERISTICS (TND14V-820K∼TND14V-182K) at 20℃
MAX.
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
14V-182K
14V-112K
14V-102K
14V-911K
14V-821K
14V-751K
14V-681K
14V-621K
14V-561K
14V-511K
14V-471K
14V-431K
14V-391K
14V-361K
14V-331K
14V-271K
14V-241K
14V-221K
14V-201K
14V-151K
2000
1500
1000
800
700
600
500
400
14V-121K
14V-101K
14V-820K
300
VOLTAGE (V)
2000A
200
150
100
80
70
60
50
40
30 -6
-5
-4
10
10
10
Direct Current (A)
-3
10
-2
-1
0
1
10
10
10
10
8/20µsec Impulse Current (A)
2
10
3
6000A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
53
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆RATINGS (Type 20V)
Previous
Part Number
Part Number
Max. Allowable
Voltage
AC (Vrms) DC (V)
(Just for your reference)
TND20V-180KB00AAA0
TND20V-220KB00AAA0
TND20V-270KB00AAA0
TND20V-330KB00AAA0
TND20V-390KB00AAA0
TND20V-470KB00AAA0
TND20V-560KB00AAA0
TND20V-680KB00AAA0
TND20V-820KB00AAA0
TND20V-101KB00AAA0
TND20V-121KB00AAA0
TND20V-151KB00AAA0
TND20V-181KB00AAA0
TND20V-201KB00AAA0
TND20V-221KB00AAA0
TND20V-241KB00AAA0
TND20V-271KB00AAA0
TND20V-331KB00AAA0
TND20V-361KB00AAA0
TND20V-391KB00AAA0
TND20V-431KB00AAA0
TND20V-471KB00AAA0
TND20V-511KB00AAA0
TND20V-561KB00AAA0
TND20V-621KB00AAA0
TND20V-681KB00AAA0
TND20V-751KB00AAA0
TND20V-821KB00AAA0
TND20V-911KB00AAA0
TND20V-102KB00AAA0
TND20V-112KB00AAA0
TND20V-122KB00AAA0
TND20V-152KB00AAA0
TND20V-182KB00AAA0
TNR20V180K
TNR20V220K
TNR20V270K
TNR20V330K
TNR20V390K
TNR20V470K
TNR20V560K
TNR20V680K
TNR20V820K
TNR20V101K
TNR20V121K
TNR20V151K
TNR20V181K
TNR20V201K
TNR20V221K
TNR20V241K
TNR20V271K
TNR20V331K
TNR20V361K
TNR20V391K
TNR20V431K
TNR20V471K
TNR20V511K
TNR20V561K
TNR20V621K
TNR20V681K
TNR20V751K
TNR20V821K
TNR20V911K
TNR20V102K
TNR20V112K
TNR20V122K
TNR20V152K
TNR20V182K
14
18
22
26
30
37
44
55
65
85
100
125
145
170
180
200
225
270
300
320
350
385
410
460
505
560
615
670
745
825
895
980
1220
1465
11
14
17
20
25
30
35
40
50
60
75
95
110
130
140
150
175
210
230
250
275
300
320
350
385
420
460
510
550
625
680
720
860
1000
Maximum Ratings
Max. Peak
Current
8/20µs(A)
3000A/1 time
2000A/2 times
10000A/1 time
7000A/2 times
7500A/1 time
6500A/2 times
Max.
Energy
2ms(J)
12
14
17
21
25
30
36
44
40
50
60
75
85
100
110
120
135
160
180
195
215
250
273
273
273
273
300
325
360
400
440
480
600
720
Max. Capacitance
Clamping Typical
Rated
@1kHz
Wattage Voltage
(W)
(A) (V)
(pF)
36 39000
43 33000
53 28000
65 24000
0.2
20
77 21000
93 19000
110 17000
135 15000
135
6700
165
6100
200
5600
250
5100
300
3900
340
2700
360
2500
395
2300
455
2000
545
1700
595
1500
650
1400
710
1300
1.0
100
775
1200
845
1100
922
1000
1025
900
1120
830
1240
750
1355
700
1500
620
1650
560
1815
510
1950
450
2440
390
2970
340
Varistor Voltage
V1mA
T
E
W2
Max. ±1.0 Reference
(V)
(mm) (mm) (mm)
18 ( 16∼ 20)
5.1
1.1 10.1
22 ( 20∼ 24)
5.2
1.2 10.1
27 ( 24∼ 30)
5.3
1.4 10.1
5.5
33 ( 30∼ 36)
1.6 10.1
5.5
39 ( 35∼ 43)
1.3 10.1
5.6
47 ( 42∼ 52)
1.5 10.1
56 ( 50∼ 62)
5.7
1.7 10.1
68 ( 61∼ 75)
5.8
2.0 10.2
82 ( 74∼ 90)
4.9
1.2 10.1
5.1
100 ( 90∼ 110)
1.4 10.1
5.3
120 ( 108∼ 132)
1.5 10.1
5.6
150 ( 135∼ 165)
1.8 10.2
180 ( 162∼ 198)
5.1
1.2 10.1
200 ( 185∼ 225)
5.2
1.2 10.1
220 ( 198∼ 242)
5.3
1.3 10.1
240 ( 216∼ 264)
5.4
1.4 10.1
5.6
270 ( 247∼ 303)
1.5 10.1
5.9
330 ( 297∼ 363)
1.7 10.1
6.1
360 ( 324∼ 396)
1.9 10.2
6.2
390 ( 351∼ 429)
2.0 10.2
6.4
430 ( 387∼ 473)
2.1 10.2
6.6
470 ( 423∼ 517)
2.3 10.3
6.8
510 ( 459∼ 561)
2.4 10.3
7.1
560 ( 504∼ 616)
2.6 10.3
7.5
620 ( 558∼ 682)
2.9 10.4
7.8
680 ( 612∼ 748)
3.1 10.5
8.2
750 ( 675∼ 825)
3.4 10.6
8.5
3.6 10.6
820 ( 738∼ 902)
9.0
4.0 10.8
910 ( 819∼1001)
9.5
4.3 10.9
1000 ( 900∼1100)
4.7 11.0
1100 ( 990∼1210) 10.1
1200 (1080∼1320) 10.8 5.1* 11.2**
1500 (1350∼1650) 12.8 6.2* 11.8**
1800 (1700∼1980) 14.8 7.4* 12.4**
*E±2 **W2±2
◆DIMENSIONS [mm]
Size, Ratings
CSA Mark
Lot. No.
20V241K
TNR
Trade mark
UL mark
H
T
D
E
W
L
φd
Part Number
TND20V-180K to TND20V-511K
TND20V-561K to TND20V-112K
TND20V-122K to TND20V-182K
D
Max.
21.5
22.5
23.5
H
Max.
24.5
25.5
28.0
φd
T
Max.
L
Min.
±0.05
Ref. to
Ratings
20
0.8
W
±1.0
10.0
2
W
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
54
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆V-I CURVE (Type 20V)
500
400
300
TNR VOLT-AMPERE CHARACTERISTICS (TND20V-180K∼TND20V-680K) at 20℃
MAX.
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
20V-680K
20V-560K
20V-470K
200
20V-390K
20V-330K
20V-270K
20V-220K
20V-180K
150
100
80
70
60
50
40
VOLTAGE (V)
30
20
15
10
8
7
6
5
4
3 -6
10
5000
4000
-5
-4
10
10
Direct Current (A)
-3
10
-2
10
-1
0
1
2
3000A
3
10
10
10
10
8/20µsec Impulse Current (A)
10
TNR VOLT-AMPERE CHARACTERISTICS (TND20V-820K∼TND20V-182K) at 20℃
MAX.
3000
20V-182K
MAX. CLAMPING VOLTAGE
LEAKAGE
CURRENT
20V-112K
20V-102K
20V-911K
20V-821K
20V-751K
20V-681K
20V-621K
20V-561K
20V-511K
20V-471K
20V-431K
20V-391K
20V-361K
20V-331K
2000
1500
1000
800
700
600
500
400
20V-271K
20V-241K
20V-221K
20V-201K
20V-151K
20V-121K
20V-101K
20V-820K
VOLTAGE (V)
300
200
150
100
80
70
60
50
40
30 -6
10
-5
-4
10
10
Direct Current (A)
-3
10
-2
10
-1
0
1
2
10
10
10
10
8/20µsec Impulse Current (A)
3
10
4
10000A
10
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
55
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆GENERAL SPECIFICATIONS
Test Conditions
Item
Standard Test
Condition
Varistor Voltage
Maximum Allowable
Voltage
Maximum Peak
Surge Current
Energy Rating
Rated Wattage
Maximum Clamping
Voltage
Capacitance
Voltage Temperature
Coefficient
Insulation
20±15℃, 85%RH Max.
Voltage across varistor at specified current.
Type
Current CmA
0.1
5V
1.0
7V, 9V, 10V, 12V, 14V, 20V
Maximum continuous AC voltage (50 to 60Hz AC) and maximum DC voltage which can be
applied.
Maximum surge current (8/20µs pulse wave to be applied once, or twice, 2 minutes apart) for
varistor voltage change within±10% of the initial value.
Maximum energy (2 ms. square wave to be applied once) for varistor voltage change within
±10% of the initial value.
Maximum power (50 to 60Hz AC power to be applied for 1000 hours at 85±2℃) for varistor
voltage change within ±10% of the initial value.
Maximum voltage across varistor when 8/20µs rated current surge is applied.
Varistor's capacitance at 1kHz, standard test condition.
VcmA at 85℃– VcmA at 25℃
×
VcmA at 25℃
1
×100 (%/℃)
60
VcmA : Actual varistor voltage
Short circuit the two leads of varistor, and put the varistor body into metal balls (1.6mm
diameter) leaving 2mm epoxy coating outside. Then, apply 2.5kVrms between the leads and
the metal balls for 60±5 sec..
◆ENVIRONMENTAL CHARACTERISTICS
Item
Test Conditions
High Temperature
Storage (Dry heat)
The specimen shall be subjected 125±2℃ for 1000±12 hours without load.
Low Temperature
Storage
The specimen shall be subjected -40±2℃ for 1000±12 hours without load.
Damp heat (Humidity)
Temperature Cycle
High Temperature
Operating
Damp heat Operating
Specifications
The specimen shall be subjected to 40±2℃, 90 to 95%RH for 1000±12 hours without load.
The temperature cycle shown below shall be repeated 5 cycles.
-40±3℃, 30 minutes ⇔ +85±2℃, 30 minutes
The specimen shall be subjected to 85±2℃ with the maximum allowable voltage for 1000±12
hours.
The specimen shall be subjected to 40±2℃, 90 to 95%RH with the maximum allowable voltage
for 1000±12 hours.
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
For reference only.
Within±0.05%/℃
The varistor shall withstand
with no abnormality.
Specifications
ΔVcmA/VcmA≦±5%
However, on varistors have
nominal varistor voltages
from 15V to 68V, the varistor
voltage change shall be
ΔVcmA/VcmA≦±10%
ΔVcmA/VcmA≦±5%
ΔVcmA/VcmA≦±5%
ΔVcmA/VcmA≦±5%
No remarkable damage
ΔVcmA/VcmA≦±10%
ΔVcmA/VcmA≦±10%
Varistor voltage change of forward direction shall be measured in the test of unipolar surge life and DC load life.
Varistor voltage change is measured after stored at Standard Test Conditions for 1 to 2 hours.
Note : For 42V battery line, please contact our sales office.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
56
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
V Series
◆MECHANICAL CHARACTERISTICS
Item
Resistance to
Soldering Heat
Solderability
Lead Pull Strength
Lead Bend Strength
Vibration
Test Conditions
Each lead shall be dipped into a solder bath having a temperature of 350±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 3 +1
- 0 sec and then be stored at room
temperature for 1 to 2 hours. TheΔVcmA and mechanical damage shall be examined.
or
Each lead shall be dipped into a solder bath having a temperature of 260±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 10±1 sec and then be stored at room
temperature for 1 to 2 hours. TheΔVcmA and mechanical damage shall be examined.
Each lead shall be dipped into a methanol solution (about 25%) of rosin for 5 to 10 sec.
Then each lead shall be dipped into a solder.
Eutectic (Sn/Pb)
Solder
Pb free (Sn-3.0Ag-0.5Cu)
Solder Temp.
245±5℃
235±5℃
2±0.5sec.
Dipping Time
1.5 to 2.0mm (from the body)
Dipping Depth
Fix varistor body, and suspend specified weight toward direction of lead axis.
Type
Lead Diameter
Weight
5V, 7V, 9V
0.6mm
10N
10V, 12V, 14V, 20V
0.8mm
10N
Fix varistor body vertically. Then suspend specified weight and bent the varistor body by 90o,
and return it to the original position. Carry out the operation in the opposite direction and
return the body to the original position.
Type
Lead Diameter
Weight
5V, 7V, 9V
0.6mm
5N
10V, 12V, 14V, 20V
0.8mm
5N
Mount varistor body on vibrator, and conduct the follwing vibration test.
Peak-to-Peak amplitude : 1.5mm
Vibration frequency range : 10Hz to 55Hz
Sweeping time:
Approximately one minute for 10Hz 55Hz 10Hz
Direction and duration of vibration :
Three directions of X, Y and Z. Two hours each.
Six hours total.
Specifications
ΔVcmA /VcmA ≦±5%
No remarkable damage
At least, 95% of the leads
shall be covered with
solder uniformly.
No abnormality such as
disconnection.
ΔVcmA /VcmA ≦±5%
The leads shall not
disconnect, slacken and
peel off.
No remarkable appearance
abnormality.
ΔVcmA /VcmA ≦±5%
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
57
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SE Series
RoHS
Compliant
When the surge energy much higher than the rated maximum energy is applied to the
varistors, it may blow up and catch fire.
TNR SE series is to prevent from being caught fire even very high surge energy is applied.
Thus electric appliance using our TNR SE series can be much safer.
◆FEATURES
●Newly
developed non-flammable material (Halogen Free) is used for outer coating.
new outer coating will meet UL flammability test.
● At the over voltage test, the new material shall deter burning caused by the high temperature,
arc and the large surge current when TNR shall blow up.
● General specifications are same as that of V series, large surge capability TNR.
● Strong to thermal shock. (-40℃ - 85℃, 50 cycles)
● UL, CSA and VDE recognized components
UL1449 3rd File : E323623
CSA
File : LR97864
VDE
File : 118623
● The
◆APPLICATIONS
● Protection
for semiconductors from over voltage.
for electronic instruments from lightning surge.
● Absorption of on-off surge from motors and relays.
● Protection
Operating Temperature Range: -40 to +85℃
Storage Temperature Range: -50 to +125℃
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
T ND 1 0 SE 4 7 1 K T FA AAA 0
Design Code
Lead Forming / Taping
Packing Style⑦
Varistor Volt. Tolerance⑥
Varistor Voltage⑤
Series④
Element Diameter③
Product Form②
Category①
①Category
T
Metal Oxide
Varistors
TNR
⑤Varistor Voltage
ND
②Product Form
Disk Type
The first two digits are significant figures
and the third one denotes the number of
following zeros.
③Element Diameter
10
12
14
20
⑥Varistor Volt. Tolerance
K
±10%
φ10 mm
φ12 mm
φ14 mm
φ20 mm
SE
④Series
SE Series
⑦Packing Style
B
T
Bulk
Taping
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
58
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SE Series
◆RATINGS AND CHARACTERISTICS
Part Number
TND10SE221KT**AAA0
TND10SE241KT**AAA0
TND10SE271KT**AAA0
TND10SE431KT**AAA0
TND10SE471KT**AAA0
TND10SE511KT**AAA0
TND10SE621KT**AAA0
TND12SE431KT**AAA0
TND12SE471KT**AAA0
TND12SE511KT**AAA0
TND12SE621KT**AAA0
TND14SE221KT**AAA0
TND14SE241KT**AAA0
TND14SE271KT**AAA0
TND14SE431KT**AAA0
TND14SE471KT**AAA0
TND14SE511KT**AAA0
Previous
Part Number
Max. Allowable
Voltage
(Just for your reference)
AC (Vrms) DC (V)
180
140
TNR10SE221K-T**
200
150
TNR10SE241K-T**
225
175
TNR10SE271K-T**
350
275
TNR10SE431K-T**
385
300
TNR10SE471K-T**
410
320
TNR10SE511K-T**
505
385
TNR10SE621K-T**
350
275
TNR12SE431K-T**
385
300
TNR12SE471K-T**
410
320
TNR12SE511K-T**
505
385
TNR12SE621K-T**
180
140
TNR14SE221K-T**
200
150
TNR14SE241K-T**
225
175
TNR14SE271K-T**
350
275
TNR14SE431K-T**
385
300
TNR14SE471K-T**
410
320
TNR14SE511K-T**
TND14SE621KT**AAA0 TNR14SE621K-T**
385
505
TND20SE221KB00AAA0 TNR20SE221K
TND20SE241KB00AAA0 TNR20SE241K
TND20SE271KB00AAA0 TNR20SE271K
TND20SE431KB00AAA0 TNR20SE431K
TND20SE471KB00AAA0 TNR20SE471K
TND20SE511KB00AAA0 TNR20SE511K
140
150
175
275
300
320
180
200
225
350
385
410
TND20SE621KB00AAA0 TNR20SE621K
385
505
**: Taping Code
Maximum Ratings
Max. Peak
Current
8/20µs(A)
3500A/1 time
2500A/2 times
4200A/1 time
3000A/2 times
6000A/1 time
5000A/2 times
5000A/1 time
4500A/2 times
10000A/1 time
7000A/2 times
7500A/1 time
6500A/2 times
Max.
Energy
2ms(J)
27.5
30
35
55
60
67
67
55
60
67
67
55
60
70
110
125
136
Max.
Clamping
Voltage
Rated
Wattage
(W)
(A)
0.4
25
0.4
25
0.6
50
(V)
360
395
455
710
775
845
1025
710
775
845
1025
360
395
455
710
775
845
Capacitance
Varistor Voltage Thickness
Typical
V1mA
T
@1kHz
MAX.
(pF)
(V)
450
220 (198∼242)
6.9
400
240 (216∼264)
350
270 (247∼303)
240
430 (387∼473)
8.2
220
470 (423∼517)
210
510 (459∼561)
11.5
180
620 (558∼682)
460
430 (387∼473)
8.2
420
470 (423∼517)
390
510 (459∼561)
11.5
330
620 (558∼682)
850
220 (198∼242)
6.9
800
240 (216∼264)
700
270 (247∼303)
460
430 (387∼473)
8.2
420
470 (423∼517)
390
510 (459∼561)
136
1025
330
620 (558∼682)
110
120
135
215
250
273
360
395
455
710
775
845
2500
2300
2000
1300
1200
1100
220 (198∼242)
240 (216∼264)
270 (247∼303)
430 (387∼473)
470 (423∼517)
510 (459∼561)
1025
900
620 (558∼682)
1.0
273
100
11.5
6.9
8.2
11.5
◆DIMENSIONS [mm]
TND10SE/TND12SE/TND14SE: Taping product is the standard specifications.
Taping Code (Previous)
Lead Shape
TFA (-T15)
Crimped, Parallel
TFB (-T8)
Crimped, Parallel
Hole Pitch (mm)
12.7
15.0
Taping Code: TFA
t2
H0
H
H1
J
T
P
ΔP
Δh
H1
H
D
P1
φD0
1.0 MAX.
W
J
W0
W1
F0
W2
φd
H0
Symbol
10SE ∼12SE511K 12SE621K
14SE
14.0 MAX. 15.0 MAX. 16.0 MAX. 17.5 MAX.
D
0.8±0.05
φd
25.4±1.0
P
12.7±0.3
P0
4.0±0.2
φD0
2.6±0.5
P1
9.0±0.5
W1
7.5±0.8
F0
0±2.0
Δh
0±1.0
ΔP
18.0＋1.0
W
−0.5
5.0 MIN.
W0
3.0 MAX.
W2
0.6±0.3
t1
1.5 MAX.
16.0±1.0
21.0 MAX. 23.0 MAX. 24.0 MAX. 25.0 MAX.
38.0 MAX. 41.0 MAX.
42.0 MAX.
6.0 MAX.
5.0 NOM.
P0
t2
t1
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
59
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SE Series
Taping Code: TFB
T
P
ΔP
H
H1
φD0
P1
F0
W
W0
W1
J
P0
5.0 NOM.
t2
t1
T
D
D
Max.
22.5
24.5
H
Max.
27.5
L
Min.
20
φd
±0.05
0.8
W
±1.0
E
±1.0
10
1.3
1.4
1.5
2.1
2.3
2.4
2.9
29.5
Trade mark
UL mark
20SE471
TNR
Size, Ratings
CSA Mark
Lot. No.
H
TND20SE: Bulk only
TND20SE221KB00AAA0
TND20SE241KB00AAA0
TND20SE271KB00AAA0
TND20SE431KB00AAA0
TND20SE471KB00AAA0
TND20SE511KB00AAA0
TND20SE621KB00AAA0
1.0 MAX.
W2
φd
1.5 MAX.
16.0±1.0
21.0 MAX. 23.0 MAX. 24.0 MAX. 25.0 MAX.
42.0 MAX.
38.0 MAX. 41.0 MAX.
6.0 MAX.
Part Number
Δh
E
W
L
t2
H0
H
H1
J
D
H0
Symbol
10SE ∼12SE511K 12SE621K
14SE
14.0 MAX. 15.0 MAX. 16.0 MAX. 17.5 MAX.
D
0.8±0.05
φd
15.0±1.0
30.0±1.0
P
15.0±0.3
P0
4.0±0.2
φD0
3.75±0.5
P1
9.0±0.5
W1
7.5±0.8
F0
Δh
0±2.0
0±1.0
ΔP
18.0＋1.0
W
−0.5
5.0 MIN.
W0
3.0 MAX.
W2
0.6±0.3
t1
φd
◆ V-I CURVE and PULSE LIFE TIME RATINGS
V-I characteristics and PULSE LIFE TIME RATINGS are same as those of V series.
Please see V-I CURVE and PULSE LIFE TIME RATINGS of V series.
CROSS REFERENCE TABLE
TNR SE SERIES
TNR V SERIES
TND10SE221K
TND10SE241K
TND10SE271K
TND10SE431K
TND10SE471K
TND10SE511K
TND10SE621K
TND12SE431K
TND12SE471K
TND12SE511K
TND12SE621K
TND14SE221K
TND14SE241K
TND14SE271K
TND14SE431K
TND14SE471K
TND14SE511K
TND14SE621K
TND20SE221K
TND20SE241K
TND20SE271K
TND20SE431K
TND20SE471K
TND20SE511K
TND20SE621K
TND10V-221K
TND10V-241K
TND10V-271K
TND10V-431K
TND10V-471K
TND10V-511K
TND10V-621K
TND12V-431K
TND12V-471K
TND12V-511K
TND12V-621K
TND14V-221K
TND14V-241K
TND14V-271K
TND14V-431K
TND14V-471K
TND14V-511K
TND14V-621K
TND20V-221K
TND20V-241K
TND20V-271K
TND20V-431K
TND20V-471K
TND20V-511K
TND20V-621K
V-I CURVE
GO TO REF. PAGE
PULSE LIFE TIME RATINGS
GO TO REF. PAGE
P.49
P.72
P.51
P.72∼P.73
P.53
P.73
P.55
P.74
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
60
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
SE Series
◆GENERAL SPECIFICATIONS
Operating Temperature Range: -40 to +85℃
Storage Temperature Range: -50 to +125℃
Test Conditions
Item
Specifications
Standard Test
Condition
20±15℃, 85%RH Max.
Varistor Voltage
The voltage between the two terminals measured at 1mA DC is called Varistor Voltage.
The measurement shall be made as fast as possible to avoid heat affection.
Maximum continuous AC voltage (50 to 60Hz/AC) and maximum DC voltage which can be
applied.
Maximum surge current (8/20µs pulse wave to be applied once, or twice, 2 minutes apart) for
varistor voltage change within ±10% of the initial value.
Maximum energy (2ms square wave to be applied once) for varistor voltage change within
±10% of the initial value.
Maximum power (50 to 60Hz/AC power to be applied for 1000 hours at 85±2℃) for varistor
voltage change within ±10% of the initial value.
Maximum voltage across varistor when 8/20µs rated current surge is applied.
Satisfy the specification
Varistor's capacitance at 1kHz, standard test condition.
1
V1mA at 85℃ – V1mA at 25℃
×
×100 (%/℃)
60
V1mA at 25℃
V1mA : Actual Varistor Voltage
Short circuit the two leads of varistor, and put the varistor body into metal balls (1.6mm
diameter) leaving 2mm epoxy coating outside. Then, apply 2.5kVrms between the leads and
the metal balls for 60±5 sec..
For reference only.
Within ±0.05%/℃
Maximum Allowable
Voltage
Maximum Peak
Surge Current
Energy Rating
Rated Wattage
Maximum Clamping
Voltage
Capacitance
Voltage Temperature
Coefficient
Insulation
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
Satisfy the specification
The varistor shall withstand
with no abnormality.
◆ENVIRONMENTAL CHARACTERISTICS
Item
Test Conditions
Specifications
High Temperature
Storage (Dry heat)
The specimen shall be subjected 125±2℃ for 1000±12 hours without load.
ΔV1mA / V1mA ≦±5%
The specimen shall be subjected -40±2℃ for 1000±12 hours without load.
ΔV1mA / V1mA ≦±5%
Damp heat (Humidity)
Temperature Cycle
The specimen shall be subjected to 40±2℃, 90 to 95%RH for 1000±12 hours without load.
The temperature cycle shown below shall be repeated 50 cycles.
-40±3℃, 30 minutes +85±2℃, 30 minutes
The specimen shall be subjected to 85±2℃ with the maximum allowable voltage for 1000±12
hours.
The specimen shall be subjected to 40±2℃, 90 to 95%RH with the maximum allowable voltage
for 1000±12 hours.
ΔV1mA / V1mA ≦±5%
ΔV1mA / V1mA ≦±5%
No remarkable damage
ΔV1mA / V1mA ≦±10%
Low Temperature
Storage
High Temperature
Operating
Damp heat Operating
ΔV1mA / V1mA ≦±10%
Varistor voltage change of forward direction shall be measured in the test of unipolar surge life and DC load life.
Varistor voltage change is measured after stored at Standard Test Conditions for 1 to 2 hours.
Note : For 42V battery line, please contact our sales office.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
61
CAT. No. E1006V
METAL OXIDE VARISTORS TNR TM
SE Series
◆MECHANICAL CHARACTERISTICS
Item
Resistance to
Soldering Heat
Solderability
Lead Pull Strength
Lead Bend Strength
Vibration
Flammability test
Test Conditions
Each lead shall be dipped into a solder bath having a temperature of 350±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 3 +1
- 0 sec and then be stored at room
temperature for 1 to 2 hours. The ΔV1mA and mechanical damage shall be examined.
or
Each lead shall be dipped into a solder bath having a temperature of 260±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 10±1 sec and then be stored at room
temperature for 1 to 2 hours. The ΔV1mA and mechanical damage shall be examined.
Each lead shall be dipped into a methanol solution (about 25%) of rosin for 5 to 10 sec.
Then each lead shall be dipped into a solder.
Eutectic (Sn/Pb)
Solder
Pb free (Sn-3.0Ag-0.5Cu)
235±5℃
Solder Temp.
245±5℃
2±0.5sec.
Dipping Time
1.5 to 2.0mm (from the body)
Dipping Depth
Fix varistor body, and suspend specified weight toward direction of lead axis.
Force
Lead diameter
10 N
φ0.6mm, φ0.8mm
The varistor shall be secured with its terminal kept vertical and the force specified below shall
be applied in the axial direction.
The terminal shall gradually be bend by 90 in one direction then back to original position.
The damage of the terminal shall be visually examined.
Lead diameter
Force
2.5 N
φ0.6mm, φ0.8mm
Mount varistor body on vibrator, and conduct the follwing vibration test.
Peak-to-Peak amplitude : 1.5mm
Vibration frequency range : 10 to 55Hz
Sweeping time:
Approximately one minute for 10Hz 55Hz 10Hz
Direction and duration of vibration :
Three directions of X, Y and Z. Two hours each.
Six hours total.
The varistor shall be subjected to 60 sec. applications of test flame.
Burner : Bunsen gas burner 9000kcal / m3
Diameter of flame nozzle : φ9.5 mm
Position : The specimen shall be fixed horizontal.
Point of application shall be approximately center of the specimen.
Specifications
ΔV1mA /V1mA ≦±5%
No remarkable damage
At least, 95% of the leads
shall be covered with
solder uniformly.
No abnormality such as
disconnection.
ΔV1mA /V1mA ≦±5%
No remarkable damage as
remarkable the inner
ceramic element or
terminal open.
No remarkable appearance
abnormality.
ΔV1mA /V1mA ±5%
No catching fire, and no
flaming drops.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
62
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
H Series
RoHS
Compliant
High Energy, Low Varistor Voltage Series
◆STANDARD RATINGS
Previous
Part Number
Part Number
(Just for your reference)
TND09H-220KB00AAA0
TND09H-270KB00AAA0
TND09H-330KB00AAA0
TND09H-390KB00AAA0
TND09H-470KB00AAA0
TND12H-220KB00AAA0
TND12H-270KB00AAA0
TND12H-330KB00AAA0
TND12H-390KB00AAA0
TND12H-470KB00AAA0
TND15H-220KB00AAA0
TND15H-270KB00AAA0
TND15H-330KB00AAA0
TND15H-390KB00AAA0
TND15H-470KB00AAA0
TND23H-220KB00AAA0
TND23H-270KB00AAA0
TND23H-330KB00AAA0
TND23H-390KB00AAA0
TND23H-470KB00AAA0
D
T
Continuous
5 minutes
DC (V)
16
19
24
28
34
16
19
24
28
34
16
19
24
28
34
16
19
24
28
34
T
Type
H
9H
12H
15H
23H
D
Max.
10.0
13.5
16.5
24.0
DC (V)
24
29
36
42
50
24
29
36
42
50
24
29
36
42
50
24
29
36
42
50
H
Max.
13.0
16.5
19.0
27.0
T
Max.
5.0
5.0
5.0
5.0
Max.
Clamping
Voltage
Max.
Energy
20ms(J)
W
±1.0
5.0
7.5
7.5
10.0
(A)
5
2
10
5
20
10
40
25
L
Min.
25.0
25.0
25.0
25.0
Varistor Voltage
V1mA
(V)
43
53
65
77
93
43
53
65
77
93
43
53
65
77
93
43
53
65
77
93
(V)
22 (20∼24)
27 (24∼30)
33 (30∼36)
39 (35∼43)
47 (42∼52)
22 (20∼24)
27 (24∼30)
33 (30∼36)
39 (35∼43)
47 (42∼52)
22 (20∼24)
27 (24∼30)
33 (30∼36)
39 (35∼43)
47 (42∼52)
22 (20∼24)
27 (24∼30)
33 (30∼36)
39 (35∼43)
47 (42∼52)
φd
±0.05
0.6
0.8
0.8
0.8
L
W
Maximum applicable
voltage for a short period
AC (Vrms)
12
15
18
22
26
12
15
18
22
26
12
15
18
22
26
12
15
18
22
26
TNR9H220K
TNR9H270K
TNR9H330K
TNR9H390K
TNR9H470K
TNR12H220K
TNR12H270K
TNR12H330K
TNR12H390K
TNR12H470K
TNR15H220K
TNR15H270K
TNR15H330K
TNR15H390K
TNR15H470K
TNR23H220K
TNR23H270K
TNR23H330K
TNR23H390K
TNR23H470K
◆DIMENSIONS [mm]
Max. Allowable Voltage
Operating Temperature Range: -40 to +125℃
Storage Temperature Range: -50 to +150℃
φd
12H, 15H
( 23H
)
(9H)
◆MARKING
EX)
●9H
TNR
H220K
●12H∼23H
TNR
12H220K
Trade mark
Size, Ratings
Lot. No.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
63
CAT. No. E1006V
3 -6
10
4
8
7
6
5
10
15
20
30
40
80
70
60
50
100
150
200
300
-4
10
Direct Current(A)
-5
10
MAX. LEAKAGE
CURRENT
-3
10
-4
10
Direct Current(A)
-5
10
MAX. LEAKAGE
CURRENT
-3
10
● TND15H-220K∼TND15H-470K
3 -6
10
4
8
7
6
5
10
15
20
30
40
80
70
60
50
100
150
200
-1
10
10
0
-1
10
10
0
8/20µsec Impulse Current(A)
-2
10
MAX. CLAMPING VOLTAGE
8/20µsec Impulse Current(A)
-2
10
MAX. CLAMPING VOLTAGE
10
1
1
10
10
2
2
at 20℃
10
at 20℃
100A
15H-220K
15H-270K
15H-330K
15H-390K
15H-470K
100A
09H-220K
09H-330K
09H-270K
09H-470K
09H-390K
3 -6
10
4
8
7
6
5
10
15
20
30
40
80
70
60
50
100
150
200
300
Direct Current(A)
-5
10
-4
10
-3
10
-4
10
Direct Current(A)
-5
10
MAX. LEAKAGE
CURRENT
-3
10
● TND23H-220K∼TND23H-470K
3 -6
10
4
8
7
6
5
10
15
20
30
40
80
70
60
50
100
150
200
MAX. LEAKAGE
CURRENT
TND12H-220K∼TND12H-470K
300
●
VOLTAGE(V)
300
VOLTAGE(V)
VOLTAGE(V)
64
VOLTAGE(V)
●TND09H-220K∼TND09H-470K
-1
10
10
0
-1
10
10
0
8/20µsec Impulse Current(A)
-2
10
MAX. CLAMPING VOLTAGE
8/20µsec Impulse Current(A)
-2
10
MAX. CLAMPING VOLTAGE
10
1
1
10
10
at 20℃
2
2
10
at 20℃
100A
23H-220K
23H-270K
23H-330K
23H-470K
23H-390K
100A
12H-220K
12H-330K
12H-270K
12H-390K
12H-470K
METAL OXIDE VARISTORS TNRTM
H Series
◆V-I CURVE
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
H Series
◆GENERAL SPECIFICATIONS
Operating Temperature Range: -40 to +125℃
Storage Temperature Range: -50 to +150℃
Test Conditions
Item
Specifications
Standard Test
Condition
20±15℃, 85%RH Max.
Varistor Voltage
The voltage between the two terminals measured at 1mA DC is called Varistor Voltage.
The measurement shall be made as fast as possible to avoid heat affection.
Maximum continuous sinusoidal RMS voltage or
Maximum continuous DC voltage which may be applied.
Maximum DC voltage to be applied for only 5 minutes.
Satisfy the specification.
The maximum voltage between the terminals, measured standard impulse current (8/20 µs).
Satisfy the specification.
Maximum energy within the ±10% varistor voltage change when 1 impulse 20 ms long is
applied.
V1mA at 85℃ – V1mA at 25℃
1
×
×100 (%/℃)
60
V1mA at 25℃
Satisfy the specification.
Maximum Allowable
Voltage
Maximum applicable
voltage for a short
period (5 minutes)
Maximum Clamping
Voltage
Maximum Energy
Temperature
Coefficient
Refer to Ratings.
Refer to Ratings.
Within
±0.05 % / ℃
◆MECHANICAL CHARACTERISTICS
Test Conditions
Item
Terminal Pull
Strength
Terminal Bending
Strength
Vibration
Resistance to
Soldering Heat
Solderability
After gradually applying the force keeping the unit fixed for 10±1 sec. in axial direction, the
damage of the terminals shall be visually examined.
Lead diameter
Force
φ0.6mm. φ0.8mm
10 N
The unit shall be secured with its terminal kept vertical and the weight specified below be
applied in the axial direction.
o
The terminal shall gradually be bend by 90 in one direction then 90º in the opposite direction,
and again back to original position.
The damage of the terminal shall be visually examined.
Lead diameter
φ0.6mm. φ0.8mm
Force
5N
After repeatedly applying a single harmonic vibration (amplitude : 0.75mm) double amplitude :
1.5mm with 1 minute vibration frequency cycle (10Hz 500Hz 10Hz) to each three
perpendicular directions for 2 hours. Total 6 hours. The devices shall be visually examined.
Each lead shall be dipped into a solder bath having a temperature of 350±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 3 +1
- 0 sec and then be stored at room
temperature for 1 to 2 hours. The ΔV1mA and mechanical damage shall be examined.
or
Each lead shall be dipped into a solder bath having a temperature of 260±10℃ to a point 2.0
to 2.5 mm from the body of the unit, be held there for 10±1 sec and then be stored at room
temperature for 1 to 2 hours. The ΔV1mA and mechanical damage shall be examined.
Each lead shall be dipped into a methanol solution (about 25%) of rosin for 5 to 10 sec.
Then each lead shall be dipped into a solder.
Eutectic (Sn/Pb)
Solder
Pb free (Sn-3.0Ag-0.5Cu)
235±5℃
Solder Temp.
245±5℃
2±0.5sec.
Dipping Time
1.5 to 2.0mm (from the body)
Dipping Depth
Specifications
ΔV1mA / V1mA ≦±5%
No remarkable damage
No remarkable damage
ΔV1mA / V1mA ≦±5%
No remarkable damage
ΔV1mA / V1mA ≦±5%
No remarkable damage
At least, 95% of the leads
shall be covered with
solder uniformly.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
65
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
H Series
◆ENVIRONMENTAL CHARACTERISTICS
Item
High Temperature
Storage (Dry heat)
Low Temperature
Storage
Damp heat
(Humidity)
Temperature Cycle
High Temperature
Operating
Damp heat Operating
Test Conditions
Specifications
The specimen shall be subjected 150±2℃ for 1000±12 hours without load.
ΔV1mA/V1mA≦±10%
The specimen shall be subjected -40±2℃ for 1000±12 hours without load.
ΔV1mA/V1mA≦±5%
The specimen shall be subjected to 60±2℃, 90 to 95%RH for 1000±12 hours without load.
ΔV1mA/V1mA≦±10%
The temperature cycle shown below shall be repeated 50 cycles.
-40±3℃, 30 minutes ⇔ +150±2℃, 30 minutes
The specimen shall be subjected to 125±2℃ with the maximum allowable voltage for 1000±12
hours.
The specimen shall be subjected to 60±2℃, 90 to 95%RH with the maximum allowable voltage
for 1000±12 hours.
ΔV1mA/V1mA≦±10%
No remarkable damage
ΔV1mA/V1mA≦±20%
ΔV1mA/V1mA≦±10%
Varistor voltage change of forward direction shall be measured in the test of unipolar surge life and DC load life.
Varistor voltage change is measured after stored at Standard Test Conditions for 1 to 2 hours.
Note : For 42V battery line, please contact our sales office.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
66
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
GF Series
RoHS
Compliant
GF Series are combined TNR Varistor with Thermal Fuse
Operating Temperature Range: -40 to +85℃
Storage Temperature Range: -50 to +125℃
◆STANDARD RATINGS
Previous
Part Number
Part Number
(Just for your reference)
15GF Type
TND15GF271KB00EAA0
TND15GF471KB00EAA0
TND15GF821KB00EAA0
23GF Type
TND23GF271KB00EAA0
TND23GF471KB00EAA0
TND23GF821KB00EAA0
TNR15GF271K-E
TNR15GF471K-E
TNR15GF821K-E
TNR23GF271K-E
TNR23GF471K-E
TNR23GF821K-E
Maximum Ratings
Max. Allowable
Voltage
AC(Vrms) DC(V)
225
175
385
300
670
510
AC (Vrms) DC (V)
225
175
385
300
670
510
Max. Peak
Current
8/20µs(A)
2500A/2 times
8/20µs(A)
4000A/2 times
Max.
Energy
2ms(J)
50
80
110
2ms(J)
90
150
190
Rated
Wattage
(W)
0.6
0.6
0.6
(W)
0.8
1.0
1.5
Max.
Capacitance
Clamping
Typical
Voltage
@1kHz
V50A (V)
440
765
1340
V50A (V)
440
765
1340
(pF)
680
450
280
(pF)
1850
1200
800
Varistor
Voltage
V1mA
T
Max.
E
±1.0
(mm)
(V)
270 (243∼297)
9
470 (423∼517)
10
820 (738∼902)
12
(mm)
(V)
270 (243∼297)
9
470 (423∼517)
10
820 (738∼902)
12
(mm)
1.5
2.2
3.5
(mm)
1.5
2.3
3.6
◆DIMENSIONS [mm]
U
TNR
T
D
H
15GF
W3
E
L
F
W
φd2
φd 1
①
②
③
D
T
H
W
W3
L
U
F
E
φd1
φd2
23GF
18 Max.
25 Max.
Refer to Standard Ratings
22 Max.
32 Max.
7.5±1
10±1
2.5 Min.
2.5 Min.
25 Min.
25 Min.
28 Max.
23 Max.
17 Min.
17 Min.
Refer to Standard Ratings
0.8±0.05
0.53±0.05
0.8±0.05
0.58±0.05
①
②
③
Type
Thermal fuse ratings
15GF
23GF
145℃-250V-1A
145℃-250V-3A
◆MARKING
EX)
TNR
15GF471K
Trade mark
Size, Ratings
Lot. No.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
67
CAT. No. E1006V
68
CAT. No. E1006V
Metal Oxide Varistors TNRTM
Application Guide
69
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
PULSE LIFE TIME RATINGS
PULSE LIFE TIME RATINGS
When the following factors are different from the specified conditions,
the peak pulse current should be revised based on the PULSE LIFE TIME RATINGS.
● Impulse duration time
● Number of impulse
Current (%)
100
90
(Impulse Current Wave Form)
50
10
0
Tf
Tt
Tf : (Rise Time)
Tt : (Impulse Duration)
●V
series
PULSE LIFE TIME RATINGS
500
400
300
1000
700
500
400
300
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
20
10
7
5
4
3
2
1 time
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
100
70
50
40
30
20
10
7
5
4
3
2
1
0.7
0.5
0.4
0.3
2 times
10
102
103 4
10
105
106
0.2
0.1
20
(TND05V-820K∼471K)
200
100
70
50
40
30
Peak Pulse Current (A)
Peak Pulse Current (A)
200
PULSE LIFE TIME RATINGS
(TND05V-180K∼680K)
100 200
1000 2000
Impulse Duration (µ s)
1 time
2 times
10
102
103
104
105 6
10
1
0.7
0.5
0.4
0.3
0.2
20
10000
100 200
1000 2000
Impulse Duration (µs)
10000
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
70
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
●V
PULSE LIFE TIME RATINGS
series
PULSE LIFE TIME RATINGS
1000
700
500
400
300
PULSE LIFE TIME RATINGS
(TND07V-150K∼680K)
2000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
1000
700
500
400
300
20
10
7
5
4
3
1 time
2
2 times
10 2
10
103 4
10
105 6
10
1
0.7
0.5
0.4
0.3
0.2
20
100 200
1000 2000
Impulse Duration (µ s)
100
70
50
40
30
20
10
7
5
4
3
1000
700
500
400
300
1
0.7
0.5
0.4
0.3
20
10000
4000
3000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
2000
1000
700
500
400
300
200
100
70
50
40
30
Peak Pulse Current (A)
Peak Pulse Current (A)
200
20
1 time
2 times
10
102
103 4
10
105 6
10
2
1
0.7
0.5
0.4
0.3
20
100 200
1000 2000
Impulse Duration (µ s)
100 200
1000 2000
Impulse Duration (µs)
10000
PULSE LIFE TIME RATINGS
(TND09V-150K∼680K)
10
7
5
4
3
1 time
2 times
10 2
10
103 4
10
105 6
10
2
PULSE LIFE TIME RATINGS
2000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
200
100
70
50
40
30
Peak Pulse Current (A)
Peak Pulse Current (A)
200
(TND07V-820K∼511K)
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
100
70
50
40
30
20
1 time
2 times
10 2
10
103 4
10
105 6
10
10
7
5
4
3
2
1
0.7
0.5
20
10000
(TND09V-820K∼511K)
100 200
1000 2000
Impulse Duration (µs)
10000
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
71
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
●V
PULSE LIFE TIME RATINGS
series
PULSE LIFE TIME RATINGS
2000
1000
700
500
400
300
PULSE LIFE TIME RATINGS
(TND10V-150K∼680K)
4000
3000
2000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
1000
700
500
400
300
100
70
50
40
30
Peak Pulse Current (A)
Peak Pulse Current (A)
200
20
10
7
5
4
3
1 time
2 times
10
102
103 4
10
105 6
10
2
1
0.7
0.5
0.4
0.3
20
100 200
1000 2000
Impulse Duration(µ s)
100
70
50
40
30
20
10
7
5
4
3
2
PULSE LIFE TIME RATINGS
4000
3000
2000
5000
4000
3000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
2000
100 200
1000 2000
Impulse Duration(µ s)
10000
(TND12V-431K∼511K)
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
1000
700
500
400
300
200
200
100
70
50
40
30
20
10
7
1 time
2 times
10
102
103
104
105
106
5
4
3
2
1
0.7
0.5
20
1 time
2 times
10
102
103
104
105
106
PULSE LIFE TIME RATINGS
(TND10V-561K∼182K)
Peak Pulse Current (A)
Peak Pulse Current (A)
1000
700
500
400
300
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
200
1
0.7
0.5
20
10000
(TND10V-820K∼511K)
100 200
1000 2000
Impulse Duration (µ s)
100
70
50
40
30
20
1 time
2 times
10
102
103
104
105
106
10
7
5
4
3
2
1
0.7
0.5
20
10000
100 200
1000 2000
Impulse Duration (µs)
10000
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
72
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
●V
PULSE LIFE TIME RATINGS
series
PULSE LIFE TIME RATINGS
5000
4000
3000
2000
PULSE LIFE TIME RATINGS
(TND12V-561K∼182K)
4000
3000
2000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
1000
700
500
400
300
200
200
Peak Pulse Current (A)
Peak Pulse Current (A)
1000
700
500
400
300
100
70
50
40
30
20
10
7
5
4
3
1 time
2 times
10
102
103
104
105
106
2
1
0.7
0.5
20
100 200
1000 2000
Impulse Duration (µ s)
10000
7000
5000
4000
3000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
100 200
1000 2000
Impulse Duration (µs)
10000
(TND14V-561K∼182K)
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
2000
1000
700
500
400
300
200
Peak Pulse Current (A)
1000
700
500
400
300
Peak Pulse Current (A)
2 times
10
102
103 4
10
105 6
10
PULSE LIFE TIME RATINGS
(TND14V-820K∼511K)
2000
200
100
70
50
40
30
20
1 time
2 times
10
102
103
104
1056
10
10
7
5
4
3
2
1
20
1 time
10
7
5
4
3
2
PULSE LIFE TIME RATINGS
10000
7000
5000
4000
3000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
100
70
50
40
30
20
1
0.7
0.5
20
10000
(TND14V-150K∼680K)
100 200
1000 2000
Impulse Duration (µ s)
100
70
50
40
30
20
1 time
2 times
10
102
103 4
10
105 6
10
10
7
5
4
3
2
1
20
10000
100 200
1000 2000
Impulse Duration (µs)
10000
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
73
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
●V
PULSE LIFE TIME RATINGS
series
PULSE LIFE TIME RATINGS
PULSE LIFE TIME RATINGS
(TND20V-180K∼680K)
4000
3000
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
1000
700
500
400
300
200
100
70
50
40
30
20
10000
7000
5000
4000
3000
2000
1 time
2 times
10 2
10
103
104
105
106
10
7
5
4
3
●V
100 200
1000 2000
Impulse Duration (µs)
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
100
70
50
40
30
20
1 time
2 times
10
102
103 104
105
106
10
7
5
4
3
2
2
1
0.7
0.5
20
(TND20V-820K∼511K)
1000
700
500
400
300
200
Peak Pulse Current (A)
2000
Peak Pulse Current (A)
30000
20000
1
20
10000
100 200
1000 2000
Impulse Duration (µs)
10000
series
PULSE LIFE TIME RATINGS
10000
7000
5000
4000
3000
2000
(TND20V-561K∼182K)
TEST CONDITION
INTERVAL:
2-10 Times: 2min.
102-106 Times:10sec.
Peak Pulse Current (A)
1000
700
500
400
300
200
100
70
50
40
30
20
1 time
2 times
10
10
7
5
4
3
2
1
20
102
103 4
10
105
106
100 200
1000 2000
10000
Impulse Duration(µs)
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
74
CAT. No. E1006V
METAL OXIDE VARISTORS TNRTM
(1)Power Source Curcuit
APPLICATION EXAMPLES
(2)Micro Computer Equipment
Swicth
AC110V
AC110V
TND14V-271K
TND14V-271K
Motor Relay
Solenoido
Power
(3)Vending Machine
(4)Leakage Current Detector
AC220V
TND14V-271K
AC110V
U
Vending Machine
Control Circuit
V
W
5
5
TND14V-471K
TND14V-471K
(6)Control of 20kW DC Motor
(5)Maganetic Brake
Gate Curcuit
AC220V
TND14V-471K
L
AC220V
TND14V-471K
TND20V-471K TND20V-471K
U
TND20V-471K
V
M
W
TND20V-471K
TND20V-471K TND20V-471K
(7)Telephone
T
TND20V-471K
R
TND10V-471K
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
75
CAT. No. E1006V
76
CAT. No. E1006V