wti.com/relay
Remote Relay Controller
CCM Series
Manage Remote Relays via Web, Telnet or Dial-Up!
Power Control & Management:
 Remote Individual or Group Relay Switching
 Open, Close, Reboot or Default Relay Switching
 Relay & Outlet Sequencing & Power Up Delays
 User-Defined Open or Closed Default Status
 Relay Naming, Grouping & Access Control
 Scheduled Open, Close & Default Switching
 Ping Watchdog with Auto Reboot
 IP & SNMP Control
(Supports SNMP Versions 1, 2C and 3)
Metering, Monitoring, Reporting:
 True RMS Current Metering
 Reports kWh, kW, Amps, Volts, Temperature
 Power Data via Web, XML, CSV, ASCII
 Outlet Current High and Low Alarms
 Temperature Alarms
 Ping-No-Answer Alarm
 Invalid Access Lockout Alarm
 Power Cycle Alarm
 No Dialtone Alarm
 Alarm Notification via Email, SNMP, SYSLOG
 Alarm, Command, Access Audit, Current, Voltage,
Watts and Temperature Logging
Access/Security/Authentication:
 In-Band (10/100Base-T Ethernet Port)
 Out-of-Band (External Modem Ready)
 Local (RJ45 RS232 SetUp Port)
 SSHv2 Encryption
 Embedded Validated FIPS 140-2 Cryptographic Module
 HTTPS/SSL Secure Web
 Multi-Level Subscriber Directory with
Outlet/Relay Specific Password Protection
 IP Address Filtering
 Remote Authentication:
LDAP/Kerberos/RADIUS/TACACS+
 IPv4 and IPv6 Compatible
 Includes WMU Enterprise Management Software
co®
Cis Wise
rgy
Ene abled
En
Model CCM-1422
Open, Close and Default Remote Relays ...
Without Leaving Your Desk
WTI’s CCM Series Remote Relay Controllers are designed to provide
secure reliable control of remote relays on high amp devices such as Cisco
Catalyst 6500 8700 Watt Power Supplies or industrial HVAC systems. The
CCM can open, close, reboot or default relays on high amp devices, on
demand, in response to alarm conditions or according to a user-defined
schedule. CCM units feature four switched relays, plus a switched IEC C13
AC outlet, which also includes current metering capabilities
The CCM supports a formidable array of security and authentication
features plus HTTPS communication and SSHv2 encryption to protect
relay switching commands and configuration functions from unauthorized
access. Supported authentication protocols include LDAP, Kerberos,
TACACS+ and RADIUS. The CCM also features an IP Address Filter to
block access by unfamiliar IPs, plus a unique callback security feature for
dial-up communication.
In addition to providing on demand switching control for dry contact
relays, the CCM can also automatically open, close, default or reboot
relays in response to user-configurable temperature alarms, ping response
monitors, invalid access alarms and power supply instability alarms.
The switched AC Outlet can measure current and power consumption
using true RMS current metering, and can also be used to reboot or switch
an additional AC powered device.
Network-grade Power Distribution:
15 Amp In-Feed
 Desktop Mounting
 Wall Mount Brackets and 1U Horizontal 19”
Rack Mount Brackets Included

Remote Relay Controller Dry Contact Manager
wti.com/relay
Remote Relay Controller
CCM Series
Control Interface:
Cisco
8700 Watt
Power Supply
IN BAND
Ethernet Port:
10/100Base-T, RJ45
Console Port:
(1) RJ45, RS232C
Telnet, SSH
Web, HTTPS
Power Input:
Voltage:
100-240V AC , 50/60 Hz
(for Control Functions and
AC Outlet)
Current:
(1) 15 Amps
Connector:
(1) IEC-60320-C14
Power Cables:
120V: DPC-13-515P-6F (C13
to NEMA 5-15P) 6 Feet,
240V: (varies)
CCM Series
Remote Relay
Manager
Dry Contact
OUT OF BAND
Remote
Administrator
PSTN or
Secondary
Network
Switched Relays
Switched
AC Outlet
Switched Relay:
AC Powered Device
AC Voltage:
100-240V AC
DC Voltage
10 Amps @ 0-28VDC &
0.8 Amps @ 29-48VDC
Current:
10 Amps DC / 15 Amps AC
Relays:
(4) Dry Contact Relays (Com/
NC/NO)
Power Output:
.4 kW DC / 3.6 kW AC
Switched AC Output:
Voltage:
100-240V AC
Current:
15 Amps
Outlets:
(1) IEC-60320-C13
Power Output:
1.2/2.8 kW
In the example above, the CCM unit is configured to allow remote dry contact
relay control via Telnet, SSH, Web or HTTPS, plus out of band control via PSTN
or secondary maintenance network, ensuring access to critical relay switching
functions even if your main network is not available. In this case, the CCM is
used to control a power switching relay on a high-amp 8700 Watt Power Supply
for a Cisco Catalyst 6500, plus also provide remote AC reboot and power
control for an additional firewall.
In addition to the network application shown in the example, CCM Series
Remote Relay Controllers are also ideal for controlling relays on high amp
industrial and manufacturing equipment, such as industrial HVAC systems and
just about any device that permits power On/Off control via dry contact relay.
Physical/Environmental:
Size:
1.74”H x 8.25”W x 5.85”D (1U)
(4.4 cm H x 21 cm W x
14.9 cm D)
Weight:
4 Lbs. (1.8 Kg) Shipping
Weight
Operating Temp:
32˚F - 122˚F (0˚C - 50˚C)
Humidity:
10 - 90% RH
Mounting:
Wall Mount Brackets and 1U
Horizontal 19” Rack Mount
Brackets Included
 5 Year Warranty
 Stocked for Same Day Shipments
 In-House Design & Manufacturing
 Made In USA
Cisco®
EnergyWise
Enabled
Agency Approvals:
CE
Call:
For More Information:
(800) 854-7226
Or Visit:
www.wti.com
Remote Relay Controller Dry Contact Manager
WTI - Western Telematic, Inc.
5 Sterling • Irvine • California 92618-2517 • Toll Free (800) 854-7226 • Email: info@wti.com • Web: www.wti.com
© Copyright 2015 Western Telematic, Incorporated
CCM150521