Mini Touch Screen/LCD Keypad Tabletop Box Installation

advertisement
1. Audio Out opening
2. Power supply opening
3. Alternative resting surface
4. Rubber base
Mini Touch Screen/LCD
Keypad Tabletop Box
Installation Guide
5. Rubber stands
Installation
1
Find an appropriate tabletop box location for the
device you will be installing:
• Put it in a convenient location, such as a tabletop
surface near a door or where remote controls
might be found.
• Power Over Ethernet (POE) products need
access to a POE connection.
• WiFi products need to be above or near a wall
outlet to access AC power.
2
Insert the cable or power cord into the back of
the box through the power supply opening.
a
Supported Model
If you are installing an Ethernet device into
the box, insert the Ethernet cable into the
back of the box through the power supply
opening (see Figure 1). Insert the end closest
• KPM-TTK1-W
to the attached white plastic cord clamp
Box Contents
and securely seat the cord clamp into the
opening (see Figure 2).
b
• Tabletop box for Mini Touch Screen or LCD
If you are installing a Wireless (WiFi) device
into the box, insert the AC power cord into
Keypad
the back of the box through the power
• Ethernet Cable with Cord Clamp for Ethernetready products: Ethernet Mini Touch Screen and
supply opening (see Figure 1). Insert the end
Ethernet LCD Keypad
closest to the attached white plastic cord
• AC Power Cord with Cord Clamp for AC-powered
devices: Wireless Mini Touch Screen or Wireless
LCD Keypad
clamp and securely seat the cord clamp into
the opening (see Figure 2).
Figure 2. Front View
• Two (2) Additional Cord Clamps: one (1) for
round cords, one (1) for square cords) for use
with Audio Out connector
• Mini Touch Screen/LCD Keypad Tabletop Box
Installation Guide (this document)
Figure 1. Back View
1
1
2
1. Cord clamp (seated)
3
3
3
2. Audio Out connector
3. Power supply cord and connector
4
5
5
2
of upgrades, return the enclosed registration card or
register online at www.control4.com.
Recycling
Mini Touch Screen/LCD
Keypad Tabletop Box
Installation Guide
For information about Control4’s recycling
program, go to www.control4.com/recycling.
About this Document
Part Number: 21-0129, Rev C 2/3/2011
3
If you are connecting an amplifier, amplified
speakers, or another supported audio output
device, insert your RCA-style connector into the
back of the box through the Audio Out opening
(see Figure 1) and secure in place with the
appropriate cord clamp (rounded or square) that
is appropriate for your connector.
4
Rotate the box on a table with the opening side
facing you. The rubber stands underneath the
box can be opened and adjusted to rest the box
more securely on the table.
5
Insert the device into the opening. Secure it by
inserting two (2) screws, one at each corner of
the box.
6
Refer to the your device’s installation guide to set
up your device.
Warranty
This device has a limited one (1) year warranty
on parts from the date of purchase. Control4 will
replace or repair any defective unit. Return unit
to the place of purchase for replacement. For any
damages incurred, the warranty will never exceed
the purchase price of the device. This warranty does
not cover installation, removal, or reinstallation cost.
The warranty is not valid in cases where damage
was incurred due to misuse, abuse, incorrect repair,
or improper wiring or installation. It does not cover
incidental or consequential damage. This warranty
gives you specific legal rights, and you might also be
entitled to other rights that vary from state to state.
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or conseqential damages. In these cases,
the above mentioned limitations might not apply to
you. For complete warranty information, see www.
control4.com. To automatically receive notification
control4.com |
©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in
the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners.
Download