Kingfisher ICD 200 Series
High Quality Colour Solid State Television
Camera With Many Advanced features.
FEATURES
 Very Rugged Construction:






Aluminium or hermetically sealed
stainless steel case.
Immune To Magnetic Interference.
Automatic White Balance setting
Long Maintenance-Free Life.
No Lag Or Image Burn-In.
Video to PAL or CCIR Specification:
composite and S-video signals
provided.
12 VDC Operation with Low Power
Consumption.
 Control of 36:1 zoom lens and other functions using pulses encoded and
superimposed onto the video waveform – control of compatible Pan and Tilt
unit also included.
DESCRIPTION
The ICD207 models are high quality solid state colour television cameras of extremely
compact dimensions, based upon a 1/4" interline transfer sensor organised as 578 rows of 752
elements, providing resolution of 530 TV lines.
Housed in a rugged stainless steel case measuring only 75 mm, diameter, the camera
includes a 36:1 zoom lens and incorporates auto or manual focus (set from the Control Unit) and
focuses down to 80mm zoomed IN or 35mm when zoomed OUT.
Electrical interfacing is by a LEMO or Fischer hermetically sealed connectors and a cable
incorporating 3 twisted pairs – this avoids the need for complex and expensive cables with mixed
coaxial and single conductor cores, and also improves EMC performance. When fitted to out
compatible PT550 pan and tilt unit, the camera supplies are looped through the unit and
decoding circuits within the camera provide the drive signals for the pan and tilt functions.
Features include very good resistance to "blooming", low lag, excellent sensitivity, perfect
positional geometry and virtual immunity from vibration and magnetic fields, making the
camera ideal for many industrial and control applications.
The associated Control Unit incorporates push buttons for a wide range of functions:
Auto or Manual focus, optical Zoom over a range of 36:1 plus digital zoom providing a
further 12:1 range with reducing image quality. Zoom speed can be selected to be Fast or Slow.
Other remotely controllable functions include back-light compensation, Left/Right image
inversion (for use when viewing through a mirror) and image stabilisation, which greatly
improves image quality when the camera is subjected to vibration or shaking.
Video outputs are Y/C and composite, and an option of Digital Video (Firewire) is also
available, to allow images to be fed to a computer for archiving.
A single DC supply is fed to the camera: discrete regulators and a synchronous inverter
within the camera derive the required voltage rails.
CUSTOM CAMERAS LTD
Unit 19, Lodge Hill Industrial Park,
Westbury-sub-Mendip, Wells, Somerset, England, BA5 1EY.
Tel: +44 (0)1749 870066 Fax: +44 (0)1749 871122 Email: tonymoon@customcameras.co.uk
Web: www.customcameras.co.uk
TECHNICAL DATA
VIDEO SIGNAL:
“S” video with separate chrominance and luminance signals to give best
quality on a suitable monitor and allowing the use of an SVHS video recorder.
Standard composite signal also available from the Control Unit.
SCANNING FORMAT:
625 lines, 50 fields/sec, 2:1 interlace (CCIR)
or 525 lines, 60 fields/sec, 2:1 int. (EIA RS170)
GAMMA:
0.45
RESOLUTION:
(LIMITING)
SENSITIVITY:
>530 TV lines per picture height.
IMAGE FORMAT:
OPTICAL INTERFACE:
3.2 x 2.4 mm (¼" format)
Camera incorporates integral 36:1 zoom lens. (1.7° - 58º) + 12 x Digital zoom
(with reduced quality)
WHITE BALANCE:
Automatic.
AMBIENT TEMPERATURE:
0 - 50°C
50 lux for full image quality;
3 lux for usable image quality.
DIMENSIONS AND WEIGHT
CAMERA:
75mm diameter – length approximately 180mm excluding connector.
CONTROL UNIT:
3U rack-mounting module or desk-mount case, depending on facilities
required.
INTERCONNECTION
(CAMERA & CCU) :
CAMERA:
12 pole sealed Lemo socket on rear face of camera.
CCU:
Y/C output: Mini DIN connector
Composite Video Out: 75 ohm BNC
Camera Connector: 7 pole Lemo connector
Digital video output: Standard 4 pin Firewire connector.
SUPPLY (TO CAMERA):
SUPPLY (TO CCU):
12V DC @ approximately 200mA
Mains 230V 50Hz or 115V 50-60Hz
Alternative: Nominal 100 V 50-60 Hz. (90 – 110V).
FUNCTIONS
CCU/CAMERA CONTROLS:
Push buttons for Auto/Manual focus (toggled), Zoom Fast/Slow (toggled),
Focus Near/Far and Zoom In/Out.
Push buttons for Digital Zoom On/Off, L/R Invert On/Off, Image
Stabilisation On/Off and Backlight compensation On/Off.
Push buttons or joystick for Pan and Tilt controls (if specified).
Variable brightness lighting control with Off position.
WE RESERVE THE RIGHT TO CHANGE THE ABOVE DATA WITHOUT NOTICE
www.customcameras.co.uk