AudiBLE & Visual Alarms Short Form Catalogue 2013 I 2014 AUDIBLE & VISUAL ALARMS Operating Rated Voltage Voltage Range Code MICRO RED MICRO RED MICRO WHITE 9-30VDC 12/24VDC 9mA Min Sound IP at Rated Rating Tone Voltage (dB@1mt) 95 IP42 28 Tone 12/24VDC 9mA 95 IP42 28 Tone MICRO WHITE ● 9-30VDC The MICRO has an ultra low current, ideal for use with the limited power a­ vailable from loop driven systems Ø102mm Buzzers and Electronic Sounders EAGLE ELECTRONIC SOUNDERS • Adjustable volume • 32 Tones select­able – 5 DIP switches (only 2 tones for SB1) • 3-wire control to select 2-tones ● Max Current at Rated Voltage (mA) Panel Mounting 30mm Ø • ­Adjustable Volume • 3 -Wire control to select sweeping or steady tone 18mA IP65 102 max 2 Tone 24VDC AS262 ● 9-28VDC AS262 Shallow Base 93mm Ø x 63mm H (mainly used for fire alarms) 24VDC 116 max ● 9-28VDC EAGLE S1 18mA EAGLE S1W ● 9-28VDC 24VDC 18mA IP54 32 Tone 116 max IP65 32 Tone 116 max IP65 116 max 32 Tone IP65 IP65 32 Tone Deep Base 93mm Ø x 105mm H (for surface conduit entry) EAGLE S1W EAGLE S1 EAGLE S1-D EAGLE S2 EAGLE S3 ● ● ● 9-28VDC 24VDC 18mA 110-130VAC 240VAC 35mA 110VDC 110VDC 30mA 116 max 24VDC 68mA 101 max IP65 2 Tone 68mA 101 max IP65 2 Tone Beacon 32 Tone Combination Electronic Sounder and Xenon Beacon (60FPM) Deep Base 93mm Ø x 105mm H EAGLE S2/3 EAGLE S1-D EAGLE SB1 EAGLE SB2 EAGLE SB3 ● ● ● 9-28VDC 110-230VAC 230VAC 110-130VAC 230VAC 60mA 116 max IP65 32 Tone Combination Electronic Sounder and Red LED Beacon (60FPM) EAGLE SB2 EAGLE SB1/SB4 SB1/ SB3/ SB4/ SB5 Deep Base 93mm Ø x 110mm H EAGLE SB4 ● 9-30VDC 24VDC EAGLE SB5 ● 110-230VDC 230VAC Size: 170mm x 170mm x155mm ASSERTA S1 ● ASSERTA S2 ● 19mA 101 IP54 19mA 101 IP65 2 Tone Beacon 32 Tone 18-30VDC 24VDC 450mA 120 IP66 42 Tone 110-240VDC 240VAC 70mA 120 IP66 42 Tone 24VDC 650mA 120 IP66 42 Tone Beacon 240VAC 70mA 120 IP66 42 Tone Beacon 24VDC 43mA 110 IP66 32 Tone 43mA 110 IP66 32 Tone Combination Electronic Sounder and Red LED Beacon (60FPM) Size: 174mm x 212mm x132mm ASSERTA SB1/SB2 ASSERTA S1/S2 ASSERTA SB1 ● MIDI S2 MIDI S3 MIDI S1/S2/S3 MIDI SB1/SB2 • Adjustable volume • 32 Tones select­able – 5 DIP switches • 2-tone selection by internal link SYMPNONI-L/H 2 18-30VDC ASSERTA SB2 ● 110-240VDC Size: 136mm x 136mm x 132mm MIDI S1 ● 6-60VDC ● ● – 115-230VAC 24VAC 24VAC 22mA Combination Electronic Sounder and RED LED Beacon Size: 136mm x 174mm x 132mm ● 115VAC MIDI SB1 ● 230VAC MIDI SB2 115VAC SOLISTA-R 12/24 VDC 230VAC 40mA 35mA LED Beacons (60FPM) Size: Ø93mm x 53mm SOLISTA ● 9-28VDC SYMPHONI-L ● SYMPHONI-H ● 12-30VDC SYMPHONI-AV ● 18-30VDC 9-28VDC 110 110 IP66 IP66 IP66 32 Tone 32 Tone IP54 Beacon 12/24 VDC 5mA 240mA 100 120 IP21 IP42 3 Tone 24 VDC 10mA 100 IP21 24 VDC 3/6mA Combination Sounder and RED LED Beacon Size (mm): Ø106 x 91 ALL 32 Tone (Red) Symphoni Size: Ø 110mm x 95mm SYMPNONI-AV 110 32 Tone 6 Tone Beacon AUDIBLE & VISUAL ALARMS Sounders ASKARI-S* Code Operating Voltage Range Rated Voltage ASKARI-S* ● 9-28VDC 28VDC Max Current at Rated Voltage (mA) Min Sound at Rated Voltage (dB@1mt) IP Rating 18mA 97 max IP21 Tone 32 Tone * Add colour to code: ● R (Red) or ● W (White) Eagle LED Beacons IP33 9-60VDC Size: Ø93 x 53(H)mm (83mm high with powered base) Description Code SOLISTA MAXI-* SOLISTA MAXI-* MAINS-PB-* • 3 Output Settings: 0,5/1/3cd (user selectable) • 3 Modes: Single / Double flash and continuous (user selectable) • Sequence or synchronised flashing • Low current (3-15mA) Application *Add colour to code: ● R (Red), ● A (Amber), ● GN (Green), ● W (White) MAINS-PB-* Powered base to convert beacon for use with 110/230VAC (Red/White) *Add colour to code: ● R (Red), ● W (White) SQUASHNI-S Squashni Sounder or Sounder- Beacon Fixing base for most popular detectors Code SQUASHNI-SB TOP CAP SQUASHNI-S SQUASHNI-SB Accessories Code Operating Voltag Rated Voltage Min Sound Light Max Current (dB@1mt) output 18-28VDC 24VDC 4-5mA 18-28VDC 24VDC 9mA 90db 90db - Red>1cd IP rating IP21 IP21 Tone 8 8 Description SQUASHNI-C Top cap (pack of 5) To complete sounder/ beacon if used alone FIRECAT Multi function fire alarm sensor 10-16VDC, 0.5-14mA Firecat - Fire Sensor Code Description FIRECAT Sensing options: Optical, Optical-heat, Heat rate rise, Heat fixed temp Extremely versatile for use with 12VDC fire alarm systems see page 5 Eagle Strobe Beacon 60 FPM IP65 Xenon Strobe Dimensions: 93mm ø x 91(H)mm (121mm H with deep base) Code FA260R FA260A FA260G FA260C Code MAINS-PB-* Colour Red ● Amber ● Green ● Clear Volts 9-60VDC 9-60VDC 9-60VDC 9-60VDC Features • Light output: 10cd • Flash frequency: 1Hz • Current: 185-45mA (depending on voltage) 85mA @ 24VDC Description Powered base to convert beacon for use with 110/230VAC *Add colour to code: ● R (Red), ● W (White) Accessories for Assembly of Combinations IP65 Code Description MAINS-PB-* EAGLE-DB-* F107-20 F505-20 MAINS-PB-* EAGLE-DB-* EAGLE-SB-* F107-20 F505-20 Powered base to convert beacon for use with 110/230VAC Deep base Shallow base Nipple for connection of bases Locking rings for use with nipple (pack of 10) * Add colour to code: ● R (Red) or ❍ W (White). Combinations of any EAGLE sounders or beacons can be assembled using deep or shallow powered bases and these accessories. Order one nipple & two locking rings for each connection. ALL 3 MARINE AUDIBLE & VISUAL ALARMS Marine Sounders & Beacons Operating Voltage Range Code Rated Voltage EAGLE-MS1 Max Current at Rated Voltage (mA) Min Sound at Rated IP Rating Tone Voltage (dB@1mt) Deep Base 93mm Ø x 93mm H SYMPHONI-MS1 EAGLE-MS1 ● 9-28VDC 28VDC 16mA 102 IP65 32 Tone ● 9-28VDC 28VDC 5mA 100 IP66 3 Tone ● 18-30VDC 30VDC 450mA 120 IP66 42 Tone 110 x 110 x 105mm SYMPHONI-MS1 168 x 168 x 155mm ASSERTA-MS1 ASSERTA-MS1 (Specifications based on using the products at 24VDC) Marine Xenon Beacons (60FPM) SOLEX-MB1 SOLEX-MB1 10-60VDC ● 60VDC 185-45mA 10 cd IP65 Beacon 30VDC 3-5mA 0.5/1/3cd IP33 Beacon 550mA 110 IP66 42 Tone Marine LED Beacons (60FPM) Deep Base 93mm Ø x 83mm SOLISTA-MB1 SOLISTA-MB1 1-30VDC ● Marine Sounders and Xenon Beacon 168 x 168 x 212 ASSERTA-MSB1 ● ASSERTA-MSB1 SYMPHONIE-AV-R 30VDC Note: siren: 45mA Xenon Beacon: 100-450mA dependant on setting Symphonie Voice SYMPHONIE-AV-W 18-30VDC VOICE SOUNDERS Code Volts IP Colour SYMPHONIE-AV-R SYMPHONIE-AV-W 12 - 28VDC IP21C Red Red 13 - 28VDC IP21C White White Symphonie Voice Weatherproof Code Volts IP Colour SYMPHONIE-AV-WP-R SYMPHONIE-AV-WP-W 12 - 28VDC IP66 Red Red 13 - 28VDC IP66 White White Specifications SYMPHONIE-AV-WP-R E IC VO ERS W D NE UN SO 4 Flash Colour • 15 - 30 Ma Current consumption • Flash Rate:1Hz • 100dB Sound Output (Tone 3) • Tones: 7 user selectable + (no tone option voice only) • Voice Message: 3 standard • Monitoring: reverse polarity Code SYMPHONI-VOICE-R SYMPHONI-VOICE-W SYMPHONI-VOICE-WP-R Alarm Pattern Tone, pause, message, pause, tone, pause, message.... Flash Colour Standard Message 1) In the interest of safety, please evacuate the building now 2) In the interest of safety, please evacuate the building now 3) Fire, fire, please leave the building! Fire, fire, please leave the building! Volts IP IP21 Red Colour Symphoni-Voice-W 9-60VDC IP21 White 9-60VDC IP66 Red The Symphoni Voice is a very low current voice sounder, capable of storing up to 16 discreet voice messages. 9-60VDC ALL LED Red Flasher 12VDC 100mA AUDIBLE & VISUAL ALARMS LED Flasher & Alarm Buzzer Alarm Fire Horn/Strobe Strobe & Siren 12VDC 250mA 12-30VDC 250mA 12VDC 250mA 24VDC@100mA 100dB 125dB 100dB 112dB HC-902 HC-901 150mmØ 200mmØ 100mmØ HC-903 HPE-106A Bells – Red, 10 min duty cycle (not suitable for fire bells) IM-86 Voltage 4" 100mm 6" 150mm 8" 200mm 12VDC 24VDC 24VAC 115VAC 230VAC dB 95 109 115 BL101 BL102 BL105 BL103 BL104 B15012DC B15024DC B15024 B15110 B15230 B20012DC B20024DC B20024 B200110 B200230 Fire Alarm Bells – Continuous rated Voltage 4" 100mm 6" 150mm HC-BB Code Size (mm) Code Size (mm) AH-9718* AH-9718* AH-9718* AH-9718* AH-9718* 12VDC 24VDC 24VAC 115VAC 230VAC dB 95 *Add Voltage to Code 8" 200mm HC-6012 HC-6024 – HC-6120 HC-6220 109 HC-1012 HC-1024 – HC-1120 HC-1220 109 *Weatherproof Box IP65 for HC Bells only HC-BB Break Glass Manual Call Point Fire Manual Call Point Gas Release Manual Call Point Door Release FD03 87 x 87 x 52 AH-0217-R 88 x 88 x 52 AH-0217-Y 88 x 88 x 52 AH-0217-GR 88 x 88 x 52 Manual Call Point Gas Detector Household Gas Detector Carbon Monoxide Detector AH-9717 140 x 45 AHG-982-12B 120 x 70 x 35 LH-83 120 x 70 x 40 CO-80LED Power: 24VDC/ 30mA When button is pressed, the fire alarm signal is activated. Phone-jack and reset buttons behind cover. Power Type: Control Panel, individual (110-230VAC adaptor) Alarm Sound: 85dB/m and above Sensitivity: 0.05-0.30% Detection type: natural gas & propane gas ALL Power: 230VAC 5W Alarm Mode: - flash & sound alarm - shut off gas valve - auto reset Sensitivity: 15% LEL Detection Type: Natural gas & LPG Power Supply: 3* AA batteries (Incl.) Sensitivity/Alarm Time: Within 60~90 minutes @ 50ppm CO concentration; Within 10~40 minutes @100ppm CO concentration; Within 3 minutes @ 300ppm CO concentration; Audibility: 85dB@1m 5 SMOKE/GAS/HEAT DETECTORS Resetable Multi Purpose Resetable Multi Purpose Resetable Multi Purpose Resetable Fixed – Photoelectric Smoke Smoke & Heat Detector Smoke & Heat Detector Temp/Heat Detector 58°C Detector (Independent type) Smoke Detector (Relay output) Code – 2 Wire Code – 4 Wire Rated Voltage (Relay output) AH-0311-2 AH-0315-2 AH-0311-4 (Relay output) AH-0315-4 (Relay output) 12-30VDC – AH-315-BPS AH-0310-2 – 12VDC 12-30VDC 12-30VDC Alarm Current 30mA 30mA 80mA Standby Current 40µA 70µA 15µA Relay Current 1C/O:0.8A@30VDC, 0.5A@250VAC 1C/O:0.8A@30VDC, 0.5A@250VAC 1C/O:0.8A@30VDC, 0.5A@250VAC Temp. of Detection – 58° C 58° C Building Height 4m 4-20m 4m 4-20m 4m 4-20m Area Covered 150m275m2 150m275m2 150m275m2 Material Fire-Proof Material Accessories Detector Test Device c/w Gas Canister Replacement Gas Canister Used in Boats, Caravans, Computer Rooms & Homes (Relay output/Buzzer) AHSS-871 – 100-240VAC with 9V Battery or 9V Battery only (included) 30mA 45µA – 58° C 4m 4-20m 30m275m2 Output Buzzer 85dB – – – 4m 4-20m 150m275m2 AH-TEST AH-CAN Features • Applicable to testing of heat & smoke detectors. • Extension pole is very flexible, it is extendable from 1.44m to 5m. AH-TEST • With the movable function of test vessel, user can easily overcome the difficulty in reaching the detector during testing. • The enclosed ignitor is generated by gas, its’ temperature is adjustable and used for heat detectors. • The smoke tester can spray about 500 times to test smoke detectors Small fire detection system set for limited areas (small shops, houses,etc). IP20 FIRE DETECTION SYSTEM State of the art analogue address fire detection control panel, suitable for medium and large installations. (hotels, malls, factories, etc). IP30 Note to program address see RSR-2143 BSR-6055/A Code Description Operating Voltage Battery Charging Circuit Loop Circuit Siren Circuits Outputs Dimensions BS-619 (kit) Fire detection 2-zone 220-240VAC/ 50-60Hz 12V/ 7Ah sealed SY1270 13.8V/ 400mA – – 2 alarm relay output 325 x 240 x 80mm BSR-1116 Analogue addressable fire detection 1 loop, 16-zone 220-240VAC/ 50-60Hz 12V/ 7Ah sealed SY1270 13.8V/ 250mA 24V/ 250mA 2 circuits 24V/ 300mA 2 programmable relays (30V/1A) 325 x 240 x 80mm Fire Alarm Devices/Accessories for BSR-1116 Code BSR-5036/A BSR-6055/A BSR-8013/A BSR-8019/A BSR-5031 BSR-2143 6 Description BSR-2143 BSR-5036/A Kit Includes: 2 x detectors, call point, siren with beacon + battery SY1270 Addressable fire detection call point Addressable analogue optical smoke detector Addressable conventional device driving unit Addressable unit input with relay Addressable fire alarm with beacon Programming Tool for BSR 6055/A Code BSR-5031/WP BSR-6558 BSR-8018 A-1100 A-632 SY1270 ALL BSR-6558 BSR-5031 BSR-5031/WP Description BSR-8013/A BSR-8019/A BSR-8018 Waterproof fire alarm siren with beacon Thermal printer for BSR-1116 Addressable input/ output unit with AUX relay Software for address programmable Mounting base, metallic recess Battery for panels 12V/7AH AUDIBLE & VISUAL ALARMS Buzzers and Electronic Sounders Max Sound Operating Rated Current Min IP Rated Voltage Voltage at Rated at Tone Voltage Range Voltage (dB@30cm) Rating (mA) Ø 65mm Code 80mm Signal Devices Fitting 30mm hole BSP 30mm Ø mounting ABS-80 BF30 30mm Ø mounting WE NE YL T S 22mA 22mA 20mA 10mA 37mA 37mA 37mA 80dB 80dB 80dB 80dB Pulse Cont./Pulse Pulse Pulse 25mA 20mA 40mA 85dB 85dB 85dB 105dB 105dB 105dB IP55 IP55 IP55 IP55 – 24VAC/ DC – 115VAC – 230VAC Signal Devices Fitting 22.5mm hole 24VAC/DC – CT-BZ 24V 20mA 42mA 40mA 85-105dB 85-105dB 85-105dB IP65 IP65 IP65 Cont/ Pulse Cont/ Pulse Cont/ Pulse 15mA 70dB IP30 Buzzer 24VAC/DC CT-BZ-N 24V CT-BZ-N 230VAC 230VAC 20mA 70dB IP30 LED/Buzzer BANDIT-F1 BANDIT-F2 BANDIT-F3 BANDIT 21-26VAC 4-29VDC 30-120VAC 60-250VAC 210-250VAC 100-120VAC 210-250VAC 10-30VDC 110-220VAC 24VAC 24VAC 24VDC 110VAC 230VAC 230VAC 110VAC 230VAC 30VDC 220VAC 24VAC Signal Devices Fitting 22.5mm hole Ø 45mm 22mm Ø WE109 24V WE109 115V WE109 230V WE109 CT-BZ-N BSP-24VAC BSP-24VDC BSP-110AD BSP-220AD ABS-80 BF30 110VAC BF30 230VAC CT-BZ 230VAC CT-BZ 230VAC – – – 15mA 20mA 70dB 70dB Signal Devices Fitting 30mm hole x 40 mm depth CT-BZ30 CT-BZ30 CT-BZ30-N CT-BZ30-N CT-BZ30 CT-BZ30 24VACDC 230VACDC 24VACDC 230VACDC Signal Devices Fitting 28mm hole Ø M28 WE118/119 CYBERTONE 27.7mm Ø mount WE382 WE118 24V WE118 115V WE118-30 250VAC WE119 24V WE119 115V WE119 230VAC CYBERTONE-* CYBERTONE-* CYBERTONE-* CYBERTONE-* CYBERTONE-* 24VAC/ DC 115VAC/ DC 30-250VAC 24VAC/ DC 115VAC 230VAC B18R3 B3S B19R3 IP30 Buzzer LED/Buzzer 16mA 16mA 16mA 16mA 70dB 70dB 70dB 70dB IP30 IP30 IP30 IP30 Buzzer Buzzer LED/ Buzzer LED/ Buzzer – – – – – – 20mA 20mA 20mA 20mA 20mA 20mA 90dB 90dB 90dB 90dB 90dB 90dB IP30 IP30 IP30 IP30 IP30 IP30 Cont Cont Cont Cont/Pulse Cont/Pulse Cont/Pulse 91dB 91dB 91dB 91dB 91dB All Purpose Installation Buzzer (fixing M3 thread) Ø 54.5 x 35.5mm depth B8S IP30 Buzzer Buzzer Buzzer Yodel Yodel Yodel – – – 25mA – 12VDC 13mA ­– 24VDC 13mA – 32VAC/DC 13mA ­– 48VAC/DC 13mA – 110VAC * Add voltage to code (eg. CYBERTONE-12VDC) WE382 12VDC WE382 230VAC WE382 115VAC WE382 230VAC B8S1120L B3S3240L B3S120L B18R3120L B18R3240L B19R3120L B19R3240L IP44 IP44 IP44 IP55 IP55 IP55 IP45 IP45 IP45 IP45 IP45 4 Tone 4 Tone 4 Tone 4 Tone 4 Tone 12VDC – 150mA 90 IP30 Buzzer 115VAC – 15mA 90 IP30 Buzzer 24VDC 230VAC – – 70mA 15mA 90 90 IP30 IP30 Buzzer Buzzer 6-16VDC 12VDC 20mA 80 IP44 Buzzer 1-13VDC 12VDC 30mA 105 IP44 Single 1-28VDC 6-15VDC 16-28VDC 6-15VDC 16-28VDC ALL 24VDC 12VDC 24VDC 12VDC 24VDC 20mA 100mA 100mA 120mA 120mA 100 107 107 110 110 IP44 IP44 IP44 IP44 IP44 Single Siren Siren Siren Siren 7 AUDIBLE & VISUAL ALARMS Loud DC Sirens SIR-002 KPS-1500 ESB-6 KPS-100T KPS-112 KPS-124 Code Volts IP dB Tone ESB-6 SIR-002 KPS-1500 KPS-112 KPS-124 KPS-100T KPS-104 KPS-6000 6-13VDC 55 114 Warble 7-13VDC 65 110 6-15VDC 65 6-14VDC 15-24VDC Rated Current Colour 300mA ● Black Warble 500mA ● Black 105 Warble 300mA ● 55 Black/Red 107 6 Tone 550mA ❍ 55 White 108 Warble 90mA ● 6-14VDC 55 Black 116 Warble 1100mA ❍ 6-15VDC 55 White 104 Warble 550mA ● 6-15VDC 65 Black 105 Warble 550mA ❍ White 112 Warble 1100mA ● Black Siren with Battery Back-up KPS-72 KPS-72 KPS-6000 KPS-104 6-14VDC 55 Wire colours R+, BL-, Blue-Trigger, White-Trigger Back-up Alert for Fork Lift IP65 AP-9805 TK-428 AP-9805 TK-428 10-80VDC 55 – 400mA ● Black 6-12VDC 55 126 650mA ● Black TK-438/R Twin Piezo Siren Red 6-12VDC 126 800mA ● Amber 6-12VDC 126 800mA ● TK-438/A TK438 Motor Driven Sirens (Die-cast Aluminium) MS1-45 MS2-114 Max Sound Current Audible Min at Rated Duty at Rated Range Voltage Cycle Voltage (dB@1m) (A) Code Volts Frequency (Hz) MS1-45 230V 230VAC/DC 1300 0.32 500m 112 15min IP44 MS1-45 110V 115VAC/DC 1300 0.56 500m 112 15min IP44 MS1-45 24V 24VAC/DC 1300 1.85 500m 112 15min IP44 MS1-45 12VDC 12VDC 1300 3.75 500m 112 15min IP44 MS2-114 230V 230VAC/DC 650 0.9 1000m 114 15min IP44 MS2-114 110V 115VAC/DC 650 1.6 1000m 114 15min IP44 MS2-114 24V 24VAC/DC 650 5.9 1000m 114 15min IP44 MS2-114 12V 12VAC/DC 650 11.7 1000m 114 15min IP44 For Marine Use (Die-cast aluminium) MS2-114C 24V 24VAC/DC 650 5.9 1000m 114 15min IP44 MS2-114C 12V 12VAC/DC 650 11.7 1000m 114 15min IP44 MS2-115 230V 230VAC/DC 650 0.9 1000m 114 15min IP44 MS2-115 110V 115VAC/DC 650 1.6 1000m 114 15min IP44 MS2-115 24V 24VAC/DC 650 5.9 1000m 114 15min IP44 MS2-115 12V 12VAC/DC 650 11.7 1000m 114 15min IP44 With Cap for Outdoor Mounting (Die-cast aluminium with ABS base) MS2-115 8 IP Rating ALL AUDIBLE & VISUAL ALARMS Code Operating Voltage Range Hand Operated Sirens H150 H200 – – Max Current Frequency at Rated Audible Voltage Range (Hz) (mA) Min Sound at Rated Duty Voltage Cycle (dB@1m) 500 500 105 110 – – 1000m 2000m 100% 100% H200 Two Tone Siren selectable Motor Driven Sirens 50% duty cycle = 15 min on/15 min off of 30 min cycle 50% 12VDC 3.35A 500 -1000m 112 1300 MS-6-95 MS-6-95 MS-6-95 MS-6-95 BAN-250 BAN-250 MINIWATT/S MINIWATT/S MINIWATT MINIWATT MS-6-95 BAN MINIWATT/S MINIWATT 500SL 1300 1.6A 500 -1000m 112 50% 220VAC/DC 1300 0.26A 500 -1000m 112 50% 110VAC/DC 1000S 1000SL 1000D 3000S 5000S 10000D 15000D 0.48A 500 -1000m 112 50% IP44 IP44 IP44 IP44 1400 0.8A 250m 100 50% IP44 12VAC/DC 1000 0.83A 300-500m 98 50% IP44 115VAC/DC 1500 0.30A 300-500m 103 50% IP44 220VAC 1400 24VAC/DC 230VAC/DC Plastic Housing 12VAC/DC 500SL 500SL 500SL 500SL 1000SL 1000SL 1000SL 1000SL 24VAC/DC 115VAC/DC 230VAC/DC 1000 1500 0.4A 0.41A 0.45A 250m 300-500m 300-500m 1150 10.6A 500m 1100 1.0A 500m 1400 1400 7.5A 0.7A 500m 500m 100 98 103 107-112 † IP45 107-112 114-117 24VAC/DC 900 8.8A 1000m 115VAC/DC 1000 1.9A 1000m 230VAC/DC 1000 1.0A 1000m 1000S* 1000S* 1000S* 1000S* 12VAC/DC 950 9.0A 110VAC/DC 950 1.5A 1000D 230VAC/DC 950 1A 1000m 116 1500S 1500S 2000D 2000D 3000S 3000S 3000S 5000S 5000S 5000S 10000D 10000D 15000D 15000D 110VAC/DC 1600 5.0A 1500m 122 230VAC/DC 230VAC 370/660 560 2.2A 9.0A 2000m 3000m 121 125 230VAC/DC 950 0.5A 114-117 114-117 † † † † 114-117 † 1000m 113 ★ 1000m 113 1000m 1000m IP44 IP45 1000m 6.0A 50% IP44 † 17.4A 950 50% IP44 107-112 900 24VAC/DC 50% † Duty Cycle 5min On - 10min Off 107-112 † IP45 12VAC/DC IP45 IP45 IP45 IP45 IP45 ★ Duty Cycle 1min On - 8min Off 113 113 ★ ★ ★ IP65 IP65 IP65 IP65 *For combination unit with either Xenon tube or LED (LED not available in Blue & Green). Add /L for LED or /X for Xenon Tube. Only available in 1000 series. Available colours: Red, Green, Blue, Amber Aluminium Housing Duty Cycle 10 Hours On , 1 Hour Off 116 95% IP65 110VAC/DC 950 2A 1000m 1000D Long Range 2000D 1300 IP44 IP44 110VAC Aluminium Housing 1000S/X/4 1500S 24VAC/DC IP Rating 230VAC/DC 110VAC/DC 400VAC 525VAC 230VAC 1600 370/660 560 560 560 400VAC 560 525VAC 560 400VAC 560 525VAC 400VAC 525VAC 560 480/560 480/560 ALL 3.5A 3.0A 1.1kW 1.1kW 2.2kW 2.2kW 2.2kW 4kW 4kW 7.5kW 7.5kW 1500m 2000m 3000m 3000m 5000m 5000m 5000m 10km 10km 15km 15km 122 121 125 125 130 130 130 140 140 145 145 95% IP65 100% 100% IP55 IP55 100% IP55 Duty Cycle Continuous 100% IP55 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% IP55 IP55 IP55 IP55 IP55 IP55 IP55 IP55 IP55 IP55 9 AUDIBLE & VISUAL ALARMS Hooter (Thermoplastic ABS Trumpet) High Power Code HW36 12VAC HW36 24VAC HW36 48VAC HW36 110VAC HW36 230VAC 365mm Voltage Range Power Consumption Min Sound at Rated Voltage (dB@1m) Duty Cycle IP Rating 10-14VAC 5.3A 105dB 50% IP45 44-52VAC 1.7A 105dB 50% IP45 20-26VAC 94-121VAC 196-250VAC 2.7A 0.5A 0.3A Mini Hooter – ABS Grey KLH710 24VAC KLH710 24VDC KLH710 110VAC KLH710 230VAC 170mm 105dB 105dB 105dB 50% 50% 50% IP45 IP45 IP45 24VAC 190mA 92dB 100% IP43 110VAC 15mA 92dB 100% IP43 24VDC 230VAC 70mA 15mA 92dB 92dB 100% 100% IP43 IP43 Marine Horn - very loud 340mm HW571 24VDC 24VDC 600mA 108dB 100% IP65 HW571 230VAC 230VAC 110mA 108dB 100% IP65 Membrane galvanised and epoxy powder coated, screws A4 with isolation, and rubber washers for mounting avoiding galvanic corrosion, additional membrane sealing, aluminium-die cast epoxy-powder coated RAL 7000/ 7015 housing. Mini Horn KDH710 12VDC KDH710 24VDC KDH710 60VDC KDH710 110VAC KDH710 230VAC 70mm 80mm Mini Horn for Lifts KDHL-6VDC KDHL-12VDC 12VDC 120mA 92dB 100% IP43 60VDC 20mA 92dB 100% IP43 24VDC 110VAC 230VAC 6VDC 12VDC 60mA 20mA 15mA 65mA 33mA 92dB 92dB 92dB 100% 100% 100% IP43 IP43 IP43 83 83 100% 100% IP43 IP43 Ø70 mm Hooter and Xenon Strobe Combo – ABS Grey mm 256 KLF710-* 110VAC 94-120VAC 0.04A 92 100% IP43 KLF710-* 230VAC 196-250VAC 0.025A 92 100% IP43 KLF710-* 12VDC 10-14VDC 0.3A 92 100% IP43 KLF710-* 24VDC 20-28VDC 0.17A 92 100% IP43 *Add colour: ● R (Red), ● G (Green), ● A (Amber). Phone Ringer Module For Standard 2 Wire Analogue Phones Only HW-SHTR001 Electronic module for external ringer using KLH710 230VAC hooter or any other electronic siren Telephone Electronic Sounder For Standard 2 Wire Analogue Phones Only ConsumSupply Type Dimensions Code Voltage ption BS-500 10 BS-505 BS-500 Sounder BS-505 Sounder + Beacon 230VAC • Connected in parallel with the telephone • No need for additional relays ALL Sound Output@1m IP Rating 6W 92Ø x 98mm 80-105dB IP20 6W 205 x 100 x 57mm 80-105dB (Adj) IP20 • Adjustable volume control • Supplied c/w mounting bracket FLAMEPROOF SIRENS & BEACONS Flameproof Motorised Sirens • Application: Class 1, 2 & 3 all groups. Division 1 and 2 areas Code Audible Range Min Sound at Rated Voltage (dB@1m) 1000m 1000m 113 - Ex Duplo 113 - Ex Duplo EP500† EP500† 12VAC/DC 24VAC/DC 1200 1200 9 4.8 1000m 1000m 113 - Ex Mono 113 - Ex Mono EP1500 EP1500 115VAC 230VAC 1600 1600 2.6 2.1 1500m 1500m 126 126 115VAC 230VAC 370/660 370/660 4.0 3.0 2000m 2000m 128 128 Duty Cycle 30min on, 10min off EP2000 EP2000 EP2000 Max Current at Rated Voltage (A) *Duty Cycle - Continuous 2 1200 1200 1 EP500* EP500* EP1500 Frequency (Hz) Duty Cycle 1min on, 8min off 115VAC 230VAC † EP500 EX Mono & EX Duplo Operating Voltage Range Flameproof Electronic Sounder Code EXS* Description Sound Output @1m Flameproof Multi Sounder 93-113dB *Add voltage: 12VDC, 24VDC, 115VAC, 230VAC • Maintenance free solid state sounder • Four sounds from one unit for different applications • High sound output with volume control • Application: Class 1, 2 & 3 all groups. Division 1 & 2 areas EXS Multi Sounder Flameproof Beacon Code Description EXF-A* EXF-B* EXF-G* EXF-R* Flameproof Beacon Flameproof Beacon Flameproof Beacon Flameproof Beacon ● Amber ● Blue ● Green ● Red Colour FPM Light EXFL-A* EXFL-R* EXFL-G* Flameproof Beacon Flameproof Beacon Flameproof Beacon ● Amber ● Red ● Green 110 110 110 LED LED LED FPM Light 110 110 110 LED LED LED 110 110 110 110 Xenon Tube Xenon Tube Xenon Tube Xenon Tube *Add voltage: 12VDC, 24VDC, 110VAC, 230VAC • High quality steel casting, precision engineered EX Xenon & EX LED • Rugged multipurpose weatherproof device • Application: Class 1, 2 & 3, all groups. Division 1. 1 & 2 areas Flameproof Beacon and Sounder Combination Colour Code Description EX Multi Sounder & LED Beacon EXCX* EX Multi Sounder & Xenon Tube Colours EXCX-A* EXCX-B* EXCX-G* EXCX-R* Flameproof Sounder & Beacon Flameproof Sounder & Beacon Flameproof Sounder & Beacon Flameproof Sounder & Beacon ● Amber ● Blue ● Green ● Red EXCL-A* EXCL-G* EXCL-R* Flameproof Sounder & Beacon Flameproof Sounder & Beacon Flameproof Sounder & Beacon ● Amber ● Green ● Red 110 110 110 110 Xenon Tube Xenon Tube Xenon Tube Xenon Tube *Add voltage: 12VDC, 24VDC, 115VAC, 230VAC ALL 11 Sirens and Beacons: Complies to STANDARD EXD 1/11C 150 EXPLOSION PROOF EQUIPMENT Flameproof Sounders & Beacons • Application: Class 1, 2 & 3 all groups. Division 1 and 2 areas DB1 DB5 Material Max Current at Rated Voltage (A) Min Sound at Rated IP Voltage Rating Tone (dB@1m) 240VAC ABS 30mA 103 IP66 27 Tone 24VDC ABS 250mA 103 IP66 27 Tone 24VDC ABS 14mA 100 IP65 26 Tone DB7 24VDC Polyester 34mA 103 IP66 27 Tone XB8 24VDC Polyester 55mA 60F/M IP66 Beacon Code Operating Voltage Range DB1 240VAC DB1 24VDC DB5 XB8 Manual Callpoint IP67 Description Code DB7 BG2 Switch Ratings: 0 to 30VDC – 5A (resistive) or 3A (inductive); 30 to 50VDC – 1A (­resistive) or 3A (inductive); 0 to 254VAC – 5A (resistive) or 3A (inductive). Material: UV resistant glass reinforced polyester. EXH 24VAC 24VAC PC/ABS 450mA 105 IP55 Horn 115VAC PC/ABS 205mA 105 IP55 Horn EXH 230VAC 230VAC PC/ABS 70mA 105 IP66 Horn GR3T 24VAC 230VAC Aluminium 70mA 110 IP55 Siren 115VAC Aluminium 150mA 110 IP55 Siren 12-24VAC/DC Aluminium Above Sirens 100% continuous rated 160mA 109 IP55 Siren BG2 EXH 115VAC GR3T 115VAC GR3T 24V Aluminium Explosion-proof Beacon IP66 Xenon Tube GR3T Colour Code FHL113-A* FHL113-R* FHL113-G* FPM ● Amber 110 ● Red 110 ● Green 110 *Add Voltage 24V (12-24VAC/DC), 110VAC, 230VAC Connection 3/4 inch 3/4 inch 3/4 inch Spare PCB c/w Xenon Tube Code Description 113/FH-PCB 113/FH-PCB 110V 113/FH-PCB 230V FHL113 E2SIS 12/24VAC/DC P.C.B c/w Xenon Tube 110V P.C.B c/w Xenon Tube 230V P.C.B c/w Xenon Tube Sounders Intrinsically safe zone 0, 1 & 2 Gas Group 11C Max Operating Current at Voltage Material Code Rated Range Voltage (A) E5YIS E2SIS 24VDC E5YIS 24VDC 100 IP65 49 Tone 93mA 105 IP66 32 Tone ABS Flame retardant 25mA UL94VO *Add colour: ●R (Red), ●A (Amber), ●G (Green), ●B (Blue) – IP65 Beacon E25BIS-* 100 IP65 49 Tone E2BIS-* 12 ABS Flame retardant UL94VO ABS Flame retardant UL94VO 24VDC Sounder / Beacons E25BIS Min Sound at Rated IP Voltage Rating Tone (dB@1m) 25mA Beacons E2BIS 113/FH-PCB 230V ABS Flame retardant 48mA UL94VO *Add colour: ●R (Red), ●A (Amber), ●G (Green), ●B (Blue) 24VDC ALL LED EXPLOSION PROOF BEACONS Beacon / Sounder - ≥80dB Beacon II 2G Exd II CT6 II 2G Exd [ib] ib II CT6 Code Code Colour Colour BBJ-ZG-* ● Green BJD-ZG-* BBJ-ZR-* ● Red BJD-ZR-* ● Red BBJ-ZY-* ● Yellow BJD-ZY-* ● Yellow BBJ-ZB-* ● Blue BJD-ZB-* ● Blue ● Green *Add voltage to code: 110VAC, 230VAC Description • Ideally suited for use in IIA, IIB and IIC areas. • Glass cover resistant to temperature changes • Housing in aluminium alloy, powder-coated • Suitable for use in Zones 1 & 2 • LED lamp, low energy consumption, long service life • IP-Rating IP65 • Flash frequency: 150/min • Cable entry c/w cable seal-ring and locking device SIGNAL TOWERS IP44 Description Colour Lamp Type Continuous Flashing Continuous Flashing Filament Filament LED LED 1-Way R 2-Way R-Y LM-1* LMF-1* LMD-1* LMFD-1* LM-2* LMF-2* LMD-2* LMFD-2* Code 3-Way R-Y-G 4-Way R-Y-G-B LM-3* LMF-3* LMD-3* LMFD-3* LM-4* LMF-4* LMD-4* LMFD-4* 5-Way R-Y-G-B-W LM-5* LMF-5* LMD-5* LMFD-5* * Specify voltage: 12V AC/DC, 24V AC/DC, 110VAC & 230VAC Synchronised flashing rate: 70FPM. All units supplied with adjustable pole and angled bracket and Lamps/LED Accessories & Spares Code Description LM-PS Vertical Pole Stand LM-LED*-* *Add colour: R, G, Y, B, W *Add voltage: 12V AC/DC, 24V AC/DC, 110VAC, 230VAC. Spare LED Lamp for Tower Light (BA15D) ACL61-* Spare Filament lamp 7W BA 15d *Add voltage to code 12V, 24V, 110V & 230V LM-** Spare lens **Specify colour: Red, Yellow, Green, Blue, White Standard supply Extra LM-PS ALL LM-LED 13 SIGNAL TOWERS Light Module Type - IP66 • Modular design in 40mm and 70mm for universal applications • Based on latest LED techniques • Excellent cost/ performance ratio • Easy to operate connection technique (bayonet type) • Very long life span due to maintenance free LED • Comprehensive range of mounting options • Maximum No of modules = 5 (10 with double bracket XZV/ZZV) • PLC friendly (controlled leakage and inrush currents) • Hi-performance LED strobe versions available Pictures for display only, all items should be ordered seperately Code 70mmØ Code 40mmØ XLL-* ZLL-* Description Incandescent steady on (Order lamp seperately) Flash Freq XDC-*-** ZDC-*-** XDF-*-** ZDF-*-** XDA-*-** ZDA-*-** - LED steady LED Flashing LED Strobe - 2Hz 1.4Hz on - ZFF-*-** XDF-HP-*-24 XFF-HP-*-24 Hi performance LED Strobe Hi performance LED Multi-strobe - 1.4Hz 1-2.6Hz XDC-HP-*-24 - LED Multi-strobe LED steady on 1-2.6Hz - - Hi performance *For Lens colour add to code: ● A (Amber), ● R (Red), ● C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow) ** Add voltage to code: 24 (24VAC/DC), 110 (110/120VAC), 230 (230/240VAC) Lamp to be ordered seperately - Spare Filament Lamp (70mm) 7W BA15d/(40mm) 4W BA15d see accessories Accessories Code Description ACL61-* ACL62-* LWW Spare filament lamp 6-7W BA15d add voltage to code 24V, 110V or 230V Spare filament lamp 4W BA15d add voltage to code 24V, 110V or 230V Lamp replacement tool for use with 40mm modules Bases & Mountings - c/w cap to complete signal tower Sound Modules 70mmØ Sound 40mmØ Sound Module Code 70mmØ Code 40mmØ Module XDE/** XDZ ** ZDE/** - XDM/** XMW XMS 8 Tones Mounting Mounting Base - Description Continuous or Continuous and 70mm 2.8kHz@100db 2.8kHz@100db 0.5kHz@100db 40mm Pulsing Pulsing selectable 4kHz @ 80db - - ZMW Base ZMS c/w fixed mounting screws XMF ZMF Mounting base flange type XMV ZMV Wall mounting base XZV ZZV Wall mounting base Double-sided ** Add voltage to code: 24(24VAC/DC), 110 (110/120VAC), 230 (230/240VAC) Bases & Mountings - c/w cap to complete signal tower ZWR Code 70mmØ Code 40mmØ Description ZWR XMR* ZMR* Pole mount base with plastic foot C/w wall mount bracket - (plastic) (Code: ZWR) *Add length to code: 2(100mm) 3(50mm) 4(400mm) 14 XSS XSW* XFR* Pole mount base with M20 thread Pole mount base with quick mount foot adaptor ZSW* C/w wall mount bracket - (plastic) (Code: ZWR) ALL ZFR* C/w wall mount bracket - (metal) (Code: XSS) 200mm LED TRAFFIC SIGNAL LAMPS IP65 • Excludes housing • 200mm dia. V8R-400CL DX200 DX200 DX200 AB-PH PHB-R With Housing Code Power LED Qty Colour Size (mm) Colour Type Watts Type of Lens V8R-400CL V8Y-400CL V8G-400CL DX200-01 DX200-02 DX200-03 DX200-04 DX200-06 DX200-07 DX200-08 DX200-11 DX200-09 ● Red ● Yellow ● Green ● Red ● Yellow ● Green ➜ Red ➜ Green ● Red ● Green ✖ Red ● Red / ● Green Full Ball Full Ball Full Ball Full Ball Full Ball Full Ball Left or right arrow (4000 cd/m2) Left or right arrow (4000 cd/m2) 1 x Static red man 1 x Static green man Cross 2 Digit count down 15W 15W 15W 8W 8W 8W 7W 7W 7W 7W 7W 7W Cobweb Cobweb Cobweb Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Code Description PHB-R Round ABS Plastic Housing c/w metal visor AB-PH Traffic Light Set Mounting Bracket for PHB-R Stop/Go Traffic Light Set With Housing XHD200-3Z-3-* R (10W) + Y (10W) + G (10W) • Supply Volts: 230VAC • Ultra long life 100 000hrs Code Accessories DX200 • Lumen >400mcd • Vertical or horizontal assembly Green Arrow/Red Cross Traffic Light Warning Traffic Light with Housing XHD200-12-* XHD200-3Z-1-* (2-in-1) R (4W) + G (4W) R (10W) + G (10W) R (96pcs) + Y (96pcs) + G (96pcs) R(168pcs) + G (168pcs) Red + Yellow + Green Green + Red 750 x 250 x 160mm 500 x 250 x 160 *Add voltage to code: 230VAC (86-265VAC), 12VDC, 24VDC R (96pcs) + G (96pcs) Red + Green 250 x 250 x 160mm with Housing & Solar Panel 300mm LED TRAFFIC SIGNAL LAMPS IP65 Traffic Light Housing Traffic Lights • High-intensity LED • UV-Stabalised polycarbonate • Clear lens colour • Metal protection cover for lens • Waterproof housing Code Power LED Qty Colour Size (mm) XHD-300-H OPTICA300-01-†-* - 168 pcs - 10W Single Traffic Lights With Housing RW-TL300-3/1-* 12W R(168pcs)+Y(168pcs) +G(168pcs) Traffic Light Set With Housing XHL-C6006-AC* 230VAC R(96pcs)+Y(96pcs) +G(96pcs) †Add colour to code: ● R (Red), ● Y (Yellow), ● R (Red), ● Y (Yellow), ● R (Red), ● Y (Yellow), ● GN (Green) ● GN (Green) ● GN (Green) 430 x 340 x 450mm 300 x 50mm 870 x 430 x 270mm 1210 x 430 x 270mm *Add voltage to code: 230VAC (86-265VAC) or DC (24VDC), eg. XHD-300-019-230VAC Black ALL RW-TL200-SL/FY Lead Acid 12V/ 17Ah (incl.) 8W Solar panel (incl.) 61pcs Yellow 430 x 340 x 450mm Solar Traffic Light Set with Housing & Solar Panel 40W Solar Panel Incl. XHL-C6006-DC* Lead Acid 12V/35Ah (incl.) R(96pcs)+Y(96pcs) +G(96pcs) ● R (Red), ● Y (Yellow), ● GN (Green) 1210 x 430 x 270mm 15 VISUAL ALARMS Traffic Lights IP65 LED: Clear signalling even in direct sunlight • High Impact ABS • Entrances • Base or swivel bracket mounting • Underground car parks • Car wash Code 1 Lamp Lamp Colour Voltage Application LED – – LED ● Red 12 or 24VDC 890-120-68 LED 890-121-68 LED ● Red 230VAC LED ● Green 230VAC E14* ● Green 12-240V 890-220-68 890-10 890-20 890-30 890-40 890-50 Shown with fixing bows Lamp 890-120-55* 890-220-55* LED *Add voltage to Code Base Mounting Code 2 Lamp • LED 50000Hrs • Size: Ø150 x 147H LED E27* E27* E27* E27* E27* 890-221-68 890-110 890-210 890-310 – – LED E14* E14* – – ● Green ● Red ● Yellow ● Clear ● Blue 12 or 24VDC 12-240V 12-240V 12-240V 12-240V (Excluding Lamps). *15/25 Watt max, golf ball type incandescent lamp. 1 Lamp Beacons supplied without reflector, to be ordered separately 2 Lamp Beacons supplied with reflector E27 Lamps for 1 Lamp Beacon Accessories 2 Lamp Beacon Fixing bow kit Reflector sTArT sTOP Code Description 975-890-02 975-890-33 975-890-34 975-890-35 Reflector for one Lamp Fixing bow kit for one beacon Fixing bow kit for two beacons Fixing bow kit for three beacons Code Description 975-890-52 975-890-53 975-890-54 ➞ Code Stickers Stop Start E27-25 E27-25 E27-25 Volts Size 100mm 115V 25W E27 230V 24V 25W E27 25W E27 E14 Lamps for 2 Lamp Beacon Code Volts Size 75mm E14-15 E14-15 230V 15W E14 115V 15W E14 Half Dome 90 Signal Tower - IP65 Visual-Audible LED signal towers in half-dome design. Slim design for optimal integration in many applications. Suitable for indoor or outdoor use, mounted vertically or horizontally. Lens optics and reflective coating allow optimal signalling and visibillity (180˚ viewing angle). Modules always work with 24V Volume individually adjustable from ~70 - 90dB 3-Light Signal Tower - Size: 194 x 90 x 45mm Supply voltage is chosen with the respective base 16 Easy electrical connection (terminals, removable cover) Code Description HD3-90A-* HD3-90B-* HD3-90C-* HD3-90D-* Red, Yellow, Green Steady On Red, Yellow, Green Flashing Red, Yellow, Green Steady On, c/w buzzer module Red, Yellow, Green Flashing, c/w buzzer module *Add voltage to code: 24V (AC/DC), 110VAC, 230VAC Buzzer module can produce continuous or pulsing tone, selectable by dipswitch. ALL AUDIBLE & VISUAL ALARMS Vehicle Strobe Flasher (Xenon tube) IP65 ±3000 Hours operation (for airport and vehicle use). 115mm(H) x 110mm Ø Colour Volts Flash FPM Power Code Amber 10-33VDC 15W 125 Amber 12/24VAC/DC 5W 75 Amber 10-100VDC 5W 75 Red 12/24VAC/DC 5W 75 Green 12/24VAC/DC 5W 75 Blue 12/24VAC/DC 5W 75 Amber 10-30VDC 2W 75 Red 10-30VDC 2W 75 Amber 10-100VDC 2W 75 Red 10-100VDC 2W 75 Spare Lens. * ● A (Amber), ● R (Red), ● G (Green), ● B (Blue) Spare P.C. Board 12/24VAC/DC Magnetic kit for above Single bolt kit M12 Protector guard 150 Ø x 130 H Sentry Warning Lamp (complete with battery) Amber 24VDC Amber 24VDC 230V Mains charger 2W 1W (long life) ● ● ● ● ● ● ● ● ● ● 3H Bat. life 10H Bat. life Beacon Type 210 RB2XDV/15-A RB4XDV/5-A RB4XMV/5-A RB4XDV/5-R RB4XDV/5-G RB4XDV/5-B RB4XDV/2-A RB4XDV/2-R RB4XMV/2P-A RB4XMV/2P-R RB4XDV-*LENS RB4XDV-PCB FX6 FX7 FX9 FX9 Magnetic kit FX6 RB412/2 RB412/1L RB4-CHR FX7 Sentry Accessories Size 82mm x 57mmØ IP65 Colour ● Red ● Green ● Yellow Clear ● Blue Voltage Beacon No Lamp 12V, 7W 24V, 7W 115V, 7W 230V, 7W • Bulb BA15d • Total length max. 52mm 21010000 21020000 21030000 21040000 21050000 Code ACL61 12V ACL61 24V ACL61 110/130V ACL61 230/240V LED Bulb BA15d (for Beacon 210) long life 100 000hrs. Size: Ø33mm (length with BA15d end 52mm) Nominal Voltage Code Code Colour Code for Lens Continuous Light Add colour code C: Flashing Light 893 01 LM-LED*-12V LM-LED*-24V LM-LED*-110V LM-LED*-230V LM-LED 893 01C 12V 893 01C 24V 893 01C 110VAC 893 01C 230VAC *Add colour to code: R, GN, Y, W, BL 12V AC/DC 24V AC/DC 110/120V AC 230/240VAC Flashing Beacons IP65 - Size 130mm x 95Ø Code Description Xenon Flasher KF-A* Xenon Flasher KF-B* Xenon Flasher KF-G* Xenon Flasher KF-R* *Add voltage 12VAC/DC, 24VAC/DC, 110VAC, 220VAC LED Flasher KFL-A* LED Flasher KFL-R* *Add voltage 12/24 VAC/DC, 220VAC (110/220V) Colour MD1006VDC Battery Operated Models IP54 IP54 IP54 IP54 FPM ● Amber ● Blue ● Green ● Red 110 110 110 110 ● Amber ● Red 110 110 Rotating Blinking LED Beacon (100 000 hours) 6VDC Colour Code – Battery Operated IP Rating LWC-001-SR LWC-001-SA LWC-001-SB LWC-001-SG 1 = ● Orange/Amber 2 = ● Red 4 = o Clear 5 = ● Blue 6 = ● Green 7 = ● Yellow ● Red ● Amber ● Bue ● Green FPM Adjustable Adjustable Adjustable Adjustable • Accepts 4 x 1.5V AA batteries (not supplied) • 2 x mounting magnets • Size 110mm x 125Ø • On/Off switch • 3 .5mm Barrel Plug Socket to accept 6VDC external supply. Code: MD1006VDC (to be ordered separately) ALL 17 VISUAL ALARMS LED Type (Flasher, Long Life) Beacon Light - 125mm(H) x 75mmØ Beacon Flasher IP54 Hilo Flasher IP65 Colour 12-24VAC/DC110-230VAC 12-24VAC/DC110-230VAC Red ● LIB011F LIB001F LIH021F Green ● LIB012F LIB002F LIH022F Amber ● LIB013F LIB003F LIH023F • For E27 screw type add ES at end of code e.g. LIB011F-ES Beacon Type 20mm conduit nipple ES Type Combination LED Rotating/ Flasher LIH011F LIH012F LIH013F LED Steady (Non flashing, Long Life) Beacons - 143(H) x 70mmØ Hilo Type Red ● Green ● Amber ● LIB011 LIB012 LIB013 LIB001 LIB002 LIB003 LIH021 LIH022 LIH023 LIH011 LIH012 LIH013 Combination LED Flasher or Rotating Beacon - 143(H) x 70mmØ Steady on only Code Rotating / Flasher Code - Selection by switch 230VAC 230VAC Switch 120 High Bright LED's E27-FF120LED-* E27-D150LED-* 150 High Bright LEDs *Add colour to code, ● CW (Cool White), ● R (Red), ● GN (Green), ● BL (Blue), ● Y (Yellow) Strobe Beacon 80 FPM (15W, 800mA) IP53 - 800 hours continuous operation Colour Code Description Xenon Strobe Beacon Dimensions: 100mm(Ø) x 80mm(h) Spare Lens *R, G, Y, B Red Green Yellow Blue ● ● ● ● * Specify Voltage: 12VDC (6-12VAC/DC), 24VAC/DC, 115VAC and 230VAC Strobe Beacon 90 FPM (3W, 150mA) IP53 Dimensions: 77mm Ø x 50mm Red Amber Clear Blue ● ● ● *Specify Voltage: 12VDC (6-12VDC), 24VDC. Power consumption 150mA JBS-100R* JBS-100G* JBS-100Y* JBS-100B* JBS-100*LENS TK-30/R-* TK-30/A-* TK-30/C-* TK-30/B-* Flashing LED Beacons 110 FPM IP53 Description Dimensions 112mmØ x 143mm(h) * Specify Voltage: 24V(1224VAC/DC), 230V(48-230VAC/DC) Spare Lens *R, G, Y, A Colour Red Green Yellow Amber LED Beacon ● ● ● ● 113/FH*LENS 113/LEDR* 113/LEDG* 113/LEDY* 113/LEDA* *Specify Voltage: 24V (12-24VAC/DC) or 230VAC (48 - 230VAC/DC) Rotating Beacon 110 FPM IP53 Colour Description 12VDC-45W Incandescent lamp 24VDC-45W Incandescent lamp 115VAC or 230VAC: 40W Incandescent lamp Dimensions: 150mm Ø x 200mm H Red Green Yellow Amber Blue *Specify voltage: 12VDC, 24VAC/DC, 115VAC or 230VAC ● ● ● ● ● Spare Belt Spare Lens: *R, G, Y, A, B Spare Lamps: ACL51 230V, ACL41 24V, ACL41 12V, ACL51 110VAC Code 150/NR* 150/NG* 150/NY* 150/NA* 150/NB* 150/BELT 150/N*-LENS Magnetic Strobe Flasher Beacon. 105mm(H) x lensØ 100mm, Base Ø115mm Flash FPM Colour Power Code 12/24VDC 18 230V 15W Amber 15W Red 15W Clear † 15W Blue *Specify voltage: 12VDC, 24VDC, 230VAC ALL 75 ● TK-88HP/A-* 75 ● TK-88HP/R-* 75 TK-88HP/C-* 75 ● TK-88HP/B-* † Available to Police Services only LED BEACONS Strobe Flashers For Fork Lifts IP65 Code Volts AP-3107 AP-1070 AP-1070A AP-1070R AP-3107A AP-3107R 12-80VDC 12-80VDC 12-80VDC 12-80VDC Size (mm) Base 130Ø x 95(H) Base 130Ø x 95(H) Base 105Ø x 120(H) Base 105Ø x 120(H) 75 75 75 75 Colour ● Amber ● Red ● Amber ● Red LED Strobe Lights IP65 Size Ø100mm x (H)80mm Code Colour Volts SL-1301-R SL-1301-A SL-1301-C ● Red ● Amber ❍ Clear 6-14VDC 9-14VDC 9-14VDC Features • 6 Different flash patterns Specifications • Operating life: over 50 000Hrs • Electrical protection: Reverse polarity protection • Backup battery life: Steady ON Up to 2 hours Strobe/Flashing Up to 4 hours • Current drain: 60~200mA@12VDC • Adjustable flashing speed: 30~260 flashes/minute SecuriLED IP67 - Surface mount. Size: 143 x 110 x 46(D)mm. Code Code Colour Volts Quad Flash 120/min RB497032 RB497033 RB497034 RB497031 Features * Peak 1.5A for 12VDC & 750mA for 24VDC Steady On RB497032-ST RB497033-ST RB497034-ST RB497031-ST ● Amber ● Red ● Blue ● White 10-30VDC 10-30VDC 10-30VDC 10-30VDC 12VDC Power 400mA 400mA 400mA 400mA 24VDC 200mA 200mA 200mA 200mA • Certified to ECE R65 (amber and blue) • High voltage transient and polarity reversal protection fitted • Polycarbonate lens, Aluminium base coated black • Intensely bright 3rd generation LEDs • Multiple beacons may be connected together to provide synchronous or alternate flash patterns • CE - complies with EMC Directive 89/336/EEC SignalLED IP67 - Surface mount. Size: 94 x 34 x 39(D)mm. Multiflash Power Colour Code Volts DAD1001 DAD1002 DAD1003 12-24VDC 12-24VDC 12-24VDC Features 0.2A 0.2A 0.2A ● Amber ● Red ● Blue • Die-cast aluminium housing • SAE J845 Class II. Certified to EMC directive 2006/28/EC • CE - complies with EMC Directive 89/336/EEC • Operating temperature: -30˚C to +50˚C • A compact lower consumption maintenance-free LED beacon providing wide-angle light dispersion • 14 flash patterns, incl 3 integral alternating flash modes • 3 wide angled LED optics • 100 000hrs operation LED 22mm PANEL MOUNT INDICATORS & ALARMS IP65 Steady/Flashing Beacon or Steady/Flashing Beacon & Buzzer Combo Beacon: 85 -103dB Buzzer: 45mm - 2 Tones Buzzer: 65mm - 3 Tones Size 30mm 45mm 65mm 80010C405-R 80110C405-C 80210C405-R Beacon Steady / Flashing 80050C405-* 80050C313-* Codes 80150C405-* 80150C313-* 80250C405-* 80250C313-* * Add colour to code:● A (Amber), ● R (Red), ALL Supply Buzzer & Beacon Combo Volts Steady / Flashing – – 81351C405-* 81351C313-* 81451C405-* 81451C313-* 24VAC/DC 230VAC 24VAC/DC 230VAC 24VAC/DC 230VAC C (Clear), ● BL (Blue), ● GN (Green), ● Y (Yellow) 19 Beacons Type Q - IP66 LED BEACONS • Comprehensive range of cubic designed beacons with LED • Xenon Technology, Xenon strobes and LED Steady /Flashing in sizes 1 & 2, LED Multi-strobe in sizes 3 & 4 • 3 strobe patterns (Double, 6 times, multi). Strobe patterns are externally selectable. Q Beacons joined using AMK kit Code QDS-*-** Function QFS-*-** LED Steady On Xenon Strobe Flash Frequency / Flashing 1Hz 1Hz Size 1 94 x 94 x 97 QDM-*-** LED Ateady On / Flashing QFM-*-** Xenon Strobe QDL-*-** QBL-*-** QDX-*-** QBX-*-** LED Steady On LED Multi-Strobe LED Steady On LED Multi-Strobe / Flashing 1.4Hz/ 6x1Hz/Multi 1Hz Size 3 184 x 184 x 176 1Hz 1Hz Size 2 132 x 132 x 137 Size H x W x D (mm) *Add Lens colour to code: ● A (Amber),● R (Red), ❍ C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow) ** Add voltage to code: 24 (24-48VAC/DC), 110 (110-120VAC), 230 (230-240VAC), 240 (110-240VAC/DC) / Flashing 1.4Hz/ 6x1Hz/Multi 1Hz Size 4 228 x 228 x 223 Accessories Description Code AB* AG* AMK Beacons Type N - IP65 • 90Ømm compact design AMK AG* AB* • Wide voltage range due to switch mode power supply • NMS - 3 colours in one beacon NES-*-** Code Description LED Steady on / Flashing Mounting Kit for combining type Q Beacons Flat Gasket for mounting type Q Beacons Metal Mounting bracket for type Q Beacons (*Add size to Code: 1,2,3,4) • Hi-performance units for signalling in daylight • Shock and vibration resistant, maintenance free. • NFS-HP - 3 LED strobe patterns selectable by DIP switches. (Double, 6 times,multi-strobe) NFS-*-** NFS-HP*-** Double Strobe Hi Performance LED Strobe LED Strobe NMS-** NMS, NMS-HP - 3 colours in one LED Multi-Colour Flash Frequency 2Hz 1.4Hz 1.4Hz/ 6 x 1Hz/ Multi Steady On *Add Lens colour to code: ● A (Amber), ● R (Red), ❍ C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow) ** Add voltage to code: 12 (12-24VAC/DC), 24 (24-48VAC/DC), 110 (110-120VAC), 230 (230-240VAC), 240 (110-240VAC/DC) NMS-HP-** LED Multi-Colour, Hi-performance Steady On Accessories Code Description MGS WMS Beacons Type P - IP67 Metal bracket for wall mounting Magnetic mounting • 75Ømm large compact bright beacons with high ingress protection rating • Pre-mounted stainless steel M5 fixing screws • PMH LED multi colour beacons (Red-Yellow-Green) with clear lens Note: Code PCH = High Dome, PCL = Low Dome Code WMS MGS PCH-* PFH*-** Description LED Steady on LED Multi-Strobe Flash Freq 1Hz 1.4Hz/ 6x1Hz / Flashing PMH-C-** LED Multi-Colour (Red/ Yellow/ Green) Steady On *Add Lens colour to code: ● A (Amber), ● R (Red), ❍ C (Clear), ● B (Blue), ● G (Green), ● Y (Yellow) ** Add voltage to code: 24 (24VAC/DC), 110 (110-120VAC), 230 (230-240VAC) PVW 20 PMR100/250 • Pre-wired with 1m of PUR cable for easy installation • PFH, PFL LED multi strobe beacon with 2 patterns (externally selectable) PCL-*-** LED Steady on / Flashing 1Hz Accessories Description Code Plastic bracket for vertical munting PVW Aluminium tube with plastic foot 100mm PMR100 Aluminium tube with plastic foot 250mm PMR250 FLP ALL PFL-*-** LED Multi-Strobe 1.4Hz/ 6 x 1Hz LED BEACONS Rearguard Xenon IP65 Code Volts RB426002 RB426001 RB426002 RB426003 RB426004 RB426005 10-30VDC ❍ Clear 10-30VDC ● Amber 10-30VDC ● Red 10-30VDC ● Blue 10-30VDC ● Green • Power 330mA@ 12VDC, 180mA@24VDC Rearguard LED IP65 RB497001 Features 10-30VDC Drilling for Panel Mounting (ISO 4148) Colour 4 holes 7mm dia. 120˚ 130 mm dia 4 holes 7mm dia. 120˚ Cable entry ● Amber 63mm • High intensity directional hazard warning • Up to 8 beacons may be connected to flash synchronously or alternately • Triple flash - 75 flashes/min • Power 145mA @ 12VDC, 120mA @ 24VDC 148mm Applications RB497001 Suitable for many vehicle applications including utility, refuse trucks, street cleaners, delivery, recovery and large vehicles. LP Series LED Beacons IP67 - Size 44H x 76Ømm Code Power Volts RB447002 RB447003 RB445002 RB445003 85-265VAC 15mA@ 110VAC, 10mA@ 230VAC 10-100VDC 110mA@ 12VDC, 55mA@ 24VDC 85-265VAC 10-100VDC 15mA@ 110VAC, 10mA@ 230VAC 110mA@ 12VDC, 55mA@ 24VDC Colour ● Amber ● Red ● Amber ● Red • Clear lens with coloured LEDs • 65 Flashes/Min, 6 Bursts/Flash LT Series LED Beacons IP67 - Size 95H x 76Ømm Volts Power Code RB448002 RB448003 RB446002 RB446003 Colour 85-265VAC 15mA@ 110VAC, 10mA@ 230VAC ● Amber 10-100VDC 110mA@ 12VDC, 55mA@ 24VDC ● Amber 85-265VAC 10-100VDC 15mA@ 110VAC, 10mA@ 230VAC 110mA@ 12VDC, 55mA@ 24VDC ● Red ● Red • Clear lens with coloured LEDs • 65 Flashes/Min, 6 Bursts/Flash LT2 Series LED Beacons IP67 - Size 95H x 76Ømm Code Volts Power Colour RB446021 10-100VDC 110mA@ 12VDC, 55mA@ 24VDC ● Red (flashing) or ● Green (steady on) RB448021 85-265VAC 15mA@ 110VAC, 10mA@ 230VAC ● Red (flashing) or ● Green (steady on) Features A compact dual function LED beacon - green continuous and red flashing • Ideal for indicating process/system status - green continuous light for normal operation, red flashing to indicate status change • Clear lens with coloured LEDs Accessories - for LP, LT & LT2 series beacon Code FX39 FX38 FX40 Shown with beacons mounted FX40 FX2 Description Mounting pole only Mounting bracket Mounting base ALL FLP FX2 21 LED EMERGENCY FLASHING BEACONS Code Voltage LED Qty Flash Pattern Flash per min Protection Mounting Size 12-552*-** 12-60C2W-** 12.30C2W-ST 12-709C3* 12.30C2W-M22 10 - 30VDC 10 - 30VDC 10 - 80VDC 10 - 30VDC 10 - 80VDC 20 x 0.5W SMD LED 24 x 0.5W SMD LED 24 x 0.2W SMD LED 36 x 0.5W SMD LED 24 x 0.2W SMD LED Single / Double / Triple / Quadruple / Rotate Single Single / Rotate Single 150 / 74 / 76 / 75 / 143 Respectively On: 1.3s / Off: 0.27s 120 - 150 / 120 - 180 On: 1.3s / Off: 0.27s IP65 IP65 IP67 IP67 IP67 Base / Magnetic Base / Magnetic M22 Thread Pipe / Pole Base Mount Ø72.5 x 111.5mm Ø130 x 60mm Ø130 x 96mm Ø72.5 x 132mm Ø145 x 179mm Replace * in code with LED Colour - ● A (Amber), ● W(White); Replace ** in code ST = Base Mount (3 x screws), MG = Magnetic ( up to 80kph) LED ROAD LIGHTING Solar Powered Road-Side Warning Lights Single Sided Code Battery Inc. LED Qty Flash Rate Size (mm) Colour Code Battery Inc. LED Qty Flash Rate Size (mm) Double Sided RH-4803-Y 1.5V/1200mAh (Ni-Cd) 2 pc (8mm) 65 Flashes/min 326 x 163 x 29 Pole Mount Ø 50mm Pole Mount Ø 26mm RH-4804-Y RH-4603-Y 1.5V/1200mAh (Ni-Cd) 1.2V/1800mAh (Ni-Cd) 2 pc (8mm) x 2 6 (10mm) 65 Flashes/min 150 Flashes/min 326 x 163 x 29 Ø115 x 65 x 166 Yellow (other colours on request) H-931-Y 2V/2.5Ah (Lead-Acid) 8 x 1 (5mm) 120 Flashes/min Ø386 x 100 Solar Powered LED warning Beacons IP65 XHL-C6009-2-*-† 6V/ 10Ah (Lead-Acid) 33 (5mm) 60 Flashes/ min 750 x 600 x 60 XHL-C6009-1-*-† Code 6V/ 20Ah (lead-Acid) 60 (5mm) 60 Flashes/ min (flowing) 1600 x 480 x 60 *Add LED colour to code: ● Y (Yellow), ● R (Red) †Add arrow direction: L (Left), R (Red) SSL-CL9-*-** SSL-CL9-ST 5.5V/100mA Mono Crystalline Silicone Solar Panel For mounting 3.6V/1400mAh Battery to Traffic cone ±600m Visibility or pole 5 Lumens (2200mcd) Effective Light 109 x 90mm Size *Add colour to code: ● Y (Yellow), ● R (Red), ● BL (Blue), ● W (White) **Add operating mode to code: C=Constant On, F=Flash, R=Resolve Solar Warning Light IP67 - Size: Ø166 x 155H DWS301-* Code DWS302-* Steady on Type Flashing 4.3km Night Visibility 4.3 - 6.3km 1.1 watt Max Power 1.1 watt 5.0-7.5 cd Effective Light Candela (cd) Red 8.0-12.0 cd 7.5-10.0 cd Amber 12.0-16.0 cd 3.0-4.0 cd Blue 5.4-7.2 cd 6.5-7.5 cd Green 10.4-12.0 cd 7.5-10.0 cd White 12.0-16.0 cd 5.0Ah NiH2 Battery (Nickel-Hydrogen) 5.0Ah NiH2 120Hrs Operating Time 300Hrs *Add colour to code: ● R (Red), ● A (Amber), ● BL (Blue), ● GN (Green), ● W (White) 22 ALL SOLAR ROAD LIGHTS ALL Code TEA-1B02-BH Solar Cell Power Current Voltage Storage Component Category Capacity Voltage Colour Lighting Mode Working Time after full charge Size Average life 2250mWp 400mA 5.5V 350mWp 85mA 4.0V NiMh Battery 8000mAh 3.6V Amber Fast Flash ± 75/min 80h 650 x Ø98 x 240H 4 Years TEA-1E10A-BH TEA-1B03C-BH TEA-1B03*-BH 500mWp 125mA 4.0V 400mWp 100mA 4.0V NiMh Battery NiMh Battery 800mAh 1200mAh 2.4V 2.4V White White Steady On Steady On 80h 80h 250L x 78H x 50D 250L x 78H x 50D 4 Years 4 Years *Add to code: A for right LED display; B for left LED display NiMh Battery 1200mAh 2.4V Amber Fast Flash ± 60/min 30h Ø103 x 150H 4 Years GOLIGHT EXTREME-HIGH INTENSITY DC WORK LIGHTS IP67 30 Golight GXL • Beam Distance 683m • Fixed Position • UV, Water Resistant SPOT - 110,00 cd • Fixed Movement 20 0 1100 176 44 Lux 11 Lux • Multi LED • Sub Zero Temperatures Code Size (mm) Material Supply Control Beam/Angle GO-4411-GXL 132 x 122 x 84 Aluminium 9-32VDC/3Amps Non motorised Spot 10° 10 3 Lux 10 20 30 m(ft) 10 25 100(328) 200(656) Golight LED & Radioray LED • Beam Distance 894m Code GO-20494 320 Lux m(ft) • Wireless Handheld 320 Lux (Dash Mount Remote) m(ft) Size (mm) 80 Lux 20 Lux 320 Illuminance (Lux) 80 20 25(82) 50(164) 55 Lux 100(328) 220 550000cd Code GO-3051 42(140) • Wireless Handheld (Remote) • UV, BeamWater Width Resistant Lux 14•Lux Light55Source Sub Zero Temperatures 1483m 550000cd 55 Beam Spot Peak beam intensity: 550,000 Candela Maximum beam distance: 1483m/4,865ft Beam angle: 12° 14 m(ft) Material 100(328) Supply Voltage ASA Polymer 12VDC(Lux) 320 Illuminance 190 x 178 x 185 20 Lux 320 33(109) Beam Width 5 Lux 100(328) Illuminance (Lux) Peak beam intensity: 200,000 Candela Maximum beam distance: 894m/2,933ft Beam angle: 8° 25(82) 50(164) 42(140) Beam Width Size (mm) 80 Lux 25(82) 50(164) Beam/Angle Spot 8° 33(109)135° Tilt • Beam Distance 894m • UV, Water Resistant • 370° Rotation, Beam Width Lux Zero Temperatures 20 Lux 5 Lux • HID Light Source 320 Lux •80Sub • Wireless Handheld (Remote) 1483m 320 Lux Motorised 220•Lux HID 200(656) 880 200(656) Control 80 20 5 100(328) 200(656) Supply Voltage Control 880 220 55 14 Illuminance (Lux) ASA Polymer 11.5-14VDC Motorised 14 Lux Golight Stryker m(ft) 200000cd m(ft) Material 190 x 178 x 185 Illuminance (Lux) 100(328) 5 Size (mm) 220 Lux 894m • Beam Distance 1480m 880 Tilt Lux • 370° Rotation, 135° 894m 200000cd Code GO-30511 Supply 200(656) Golight Stryker H.I.D m(ft) 27(88) Beam Width 5 Lux 100(328) 25(82) 50(164) 320 Illuminance (Lux) ASA Polymer 12VDC/Amps 190 x 178 x 185 25(82) 50(164) 880 Lux Material • UV, Water Resistant • Multi LED 27(88) Beam Width 135° Tilt • Sub Zero Temperatures 370° Rotation, 80 Lux 20 Lux 5•Lux 200(656) 80 20 25(82) 50(164) 200(656) Control Motorised 80 20 5 Beam Spot Peak beam intensity: 200,000 Candela Maximum beam distance: 894m/2,933ft Beam angle: 10° 5 LIT 23 HIGH POWER - WIRELESS REMOTE CONTROLLED WORK LIGHTS • Beam Distance 1km • 200m Hand Held Wireless Remote Control • IP65 • 360° Horizontal and 120° Verticle Control • Light Output 4300lm • Fitted with Extra Strong Magnets (Secure up to 100kmh) • Colour Temperature 6000k HID HID Spare Bulb H3 (12VDC 55W) Code SM2019 Size (mm) HID HID Spare Bulb H3 (12VDC 55W) Code SM2039 LED LED Code SM2109 Code SM2209 Lens Material Supply Voltage Watts 12VDC 55W Control Motorised Size (mm) Material Lens Material Supply Voltage Watts 455x214x455 High Impact ABS Plastic Hardend Glass 24VDC 60W Control Motorised Size (mm) Material Lens Material Supply Voltage Watts 18x150x230 High Impact Nylon Plastic Hardend Glass 24VDC 60W Control Motorised Size (mm) Material Lens Material Supply Voltage Watts 570x260x515 High Impact Nylon Plastic Hardend Glass 24VDC 55W Control Motorised Beam Pattern for SM2109 / SM2209 Incandescent Work Lights (Halogen) Bulbs must be ordered seperately Code Size mm Material Voltage VDC Wattage Beam Type Bulp Type 24 E91001 1250Ø x 75(D) Rubber PAR36 12 H3 55W 1 Flood RB-H301A 120 x 120 x 150 ABS Plastic 12 35 Flood H3 Beam Spot Beam Spot • Beam Distance 300m • 200m Hand Held Wireless Remote Control • IP66 • 360° Horizontal and 120° Verticle Control • Light Output 6000lm • Fitted with Extra Strong Magnets (Secure up to 100kmh) • Colour Temperature 6000k DC WORK LIGHTS IP65 Size mm Material Voltage VDC Buld 12V No. of Bulbs Beam Type Spot • Beam Distance 300m • 200m Hand Held Wireless Remote Control • IP66 • 360° Horizontal and 120° Verticle Control • Light Output 5000lm • Fitted with Extra Strong Magnets (Secure up to 100kmh) • Colour Temperature 6000k Beam Pattern for SM2019 / 2039 Code Beam • Beam Distance 1km • 200m Hand Held Wireless Remote Control • IP65 • 360° Horizontal and 120° Verticle Control • Light Output 4300lm • Fitted with Extra Strong Magnets (Secure up to 100kmh) • Colour Temperature 6000k LED LED Material 570x260x515 High Impact Nylon Plastic Hardend Glass E91026 100 x 100 x 84 Reinforced Nylon 12 H3 55W 1 Spot E91041 168 x 72 x 76 Reinforced Nylon 12 H3 55W 1 Flood HID Work Lights - Bulbs must be ordered seperately RB-H301B 120 x 120 x 150 ABS Plastic 24 55 Spot H3 LIT RB-H302A 105 x 105 x 130 ABS Plastic 12 35 Flood D2H E91064 160 x 110 x 110 Reinforced Nylon 12V 2 x H3 55W Flood RB-H302B 105 x 105 x 130 ABS Plastic 24 55 Spot D2H Beam Spot DC LED WORK LIGHTS IP65 Code Size mm Material Voltage VDC No. of LED Beam type Code Size mm Material Voltage VDC No. of LED Beam Type RB-L401A LAW1261B C2-107/P RB-L409 84Ø x 65(D) Aluminium 9-36 4 x 3W Spot 135 x 135 x 110 Aluminium 9-36 5 x 3W Flood 126 x 86 x 70 Aluminium 10-30 8 x 3W Flood 181 x 120Ø x 83 Reinforced Plastic 9-50 4 x 3W Flood C2-126/P C2-139/P 150 x 145 x 78 Reinforced Plastic 9-50 6 x 3W Flood 110 x 137 x 84 Reinforced Plastic 9-50 4 x 3W Flood RB-L430 100 x 88 x 102 Aluminium 9-36 6 x 3W Flood LAW1201B 120Ø x 72(D) Aluminium 10-30 5 x 3W Flood HI-POWER LED WORK LIGHTS Code Power (Watt) No. Of LED Light Intensity (LM) Size Beam Type Voltage Lens Body Material LED Colour Temp Beam Pattern EA-9840-7P 15W 3 x 5W 1200lm 110 x 110 x 30 Spot EA-9840-10P EA-9800-8F EA-9840A-9F EA-9840-11P Code EA-9840-3P EA-9830A-4F EA-9800-1F EA-9820-5P EA-9820-6F Power (Watt) No. Of LED Light Intensity (LM) Size Voltage Lens Beam Type Body Material LED Colour Temp Beam Pattern 35W 7 X 5W 2800 110 x 110 x 40 10 - 30VDC Acrylic Resin Spot 21W 7 x 3W 1680lm 120Ø x 50 Flood 10 - 30VDC Acrylic Resin Aluminium 6500K 18W 6 x 3W 1440lm 110 x 110 x 30 Spot 40W 4 x 10W 3200 150 x 153 x 80 10 - 30VDC Acrylic Resin Flood 48W 16 x 3W 3840 115 x 115 x 65 10 - 30VDC Acrylic Resin Flood Aluminium Flood 5000K / Spot 6000K LIT 27W 9 x 3W 2160lm 120Ø x 70 Flood 50W 10 x 5W 4000 Ø150 x 82 10 - 30VDC Acrylic Resin Spot 33W 11 x 3W 2640lm 130 x 130 x 70 Spot 60W 6 x 10W 4800 Ø175 x 85 10 - 30VDC Acrylic Resin Flood 25 LED BAR WORK LIGHTS IP67 Single Row LED Code RB-L625S RB-L622S 40 Power 4x10W No. of LED's 2900lm Lumen Size LxHxD (mm) 200x11.5x12.3 Colour Temp. Voltage Material Beam Type RB-L623S RB-L624S RB-L625S 120 100 12x10W 10x10W 8650lm 7500lm 435x11.5x12.3 505x11.5x12.3 6500K 9-32VDC Aluminium body with Polycarbonite lens Spot Beam 60 6x10W 4350lm 280x11.5x12.3 RB-L626S 180 18x10W 13000lm 765x11.5x12.3 MODEL2LX RB-L623S Double Row LED Code RB-L634F RB-L631F 36 Power (Watt 12x3W No. of LED's 2160lm Lumen Size LxHxD (mm) 252 x 114 x 87 Colour Temp. Voltage Material Beam Type RB-L626 180W 150m RB-L625 120W 120m RB-L624 100W 100m RB-L623 60W 80m RB-L622 40W 65m RB-L632F RB-L633F SPOT LIGHT RB-L625F 180 120 60x3W 40x3W 10800lm 7200lm 609 x 114 x 87 864 x 114 x 87 6500K 9-32VDC Aluminium body with Polycarbonite lens Flood Beam 72 24x3W 4320lm 405 x 114 x 87 RB-L626F 240 80x3W 14400lm 1119 x 114 x 87 MODEL2LX RB-L631F Quad Row LED Code RB-L641F Power No. of LED's Lumen Size LxHxD (mm) Colour Temp. Voltage Material Beam Type RB-L635 240W 53.8m RB-L634 180W 5m RB-L633 120W 44.2m RB-L632 72W 38.8m RB-L631 36W 31.6m RB-L642S 72 24x3W 5040lm 167x167x93 RB-L643S FLOOD LIGHT RB-L644S RB-L645S 180 144 60x3W 48x3W 12600lm 10080lm 368x167x93 305x167x93 6500K 9-32VDC Aluminium body with Polycarbonite lens Flood Beam 108 36x3W 7560lm 235x167x93 RB-L646S 216 72x3W 15120lm 440x167x93 MODEL2LX RB-L644F 26 LIT RB-L646 216W 210m RB-L645 180W 160m RB-L644 144W 140m RB-L643 108W 110m RB-L642 72W 90m RB-L641 36W 60m SPOT LIGHT LED MOTOR VEHICLE LIGHTS IP66 LED Motor Vehicle Lights (material UV PC, cable length 350mm) Code Size mm Function Wattage Voltage VDC No of LED Code Size mm Function Wattage Voltage VDC No of LED Code Size mm Function Wattage Voltage VDC No of LED LTL0801ARW LTL1002ARW 356L x 134H x 36D Indicator + Stop + Reverse + Tail 8 10-30 52 391L x 130H x 40D Indicator + Stop + Tail 6.5 10-30 48 603L x 130H x 40D Indicator + Stop + Reverse + Tail 11.5 10-30 72 LTL1002* LTL1072* LTL1000* LTL0635* LCL1101A 0.8 10-30 4 LTL2152* 195L x 50H x 32D Indicator + Stop +Rear + Reverse 6 10-30 24 *Add to code L = Left, R = Right LTL1061/RNP 106L x 99H x 42D Indicator + Stop +Rear + Reverse + Number Plate 3 12 23 120.8L x 146H x 28.8D Indicator or Stop or Reverse 2.5 10-30 49 *Add colour code A Amber, R Red, WH White (clear) 63.5Ø x 29 Indicator or Stop or Reverse or Tai 2.5 10-30 12 100Ø x 41.2 106L x 134H x 36D 138Ø x 43.5 Indicator or Stop or Indicator or Stop or Indicator or Stop or Reverse Reverse Reverse 2.5 2.2 1.5 10-30 10-30 10-30 15 16 12 *Add colour code A Amber, R Red, WH White (clear) 100L x 43H x 12D Indicator LTL1001* LJL6031ARW LJL6031AR 343.3L x 120.9H x 28.8D Indicator + Stop + Reverse + Tail 6 10-30 108 LPL0800 98L x 40H x 46D Number Plate White LED's 2 10-30 6 LCL0602* 60L x 30H x 20D Indicator or Tail Light or Front Side Light 1.5 10-30 4 LTL3600R 330L x 40H x 22D LED Brake Light Red 2 10-30 18 REFLECTORS AND COLLAPSABLE TRAFFIC SAFETY Code Size mm Function RF2600R 171L x 171H x 17D Reflector RF8530* 88.6L x 34.6H x 9D Reflector *Add colour code A Amber, R Red PP30 19L x 19H x 30D LIT ALL PP45 24L x 24H x 45D Collapsable traffic Saftey Cones PP70 32L x 32H x 70D 27 LED NAVIGATION LAMPS IP66 IP67 Code C2-127-* IP67 C2-128GR C2-128-* Port Starboard Port Starboard Port Starboard Masthead (White) 2W 2W 1.2W Output Watts 9-33VDC 9-33VDC 9-33VDC Volts 112.5° + 112.5°/±2NM 112.5°/±2NM 360°/±2NM Angle/Distance 87.5 x 78 x 46.2 87.5 x 78 x 50 83 x 83 x 65 Size (mm) Polycarb Polycarb Polycarb Material Polycarb PMMA PMMA Lens *Add colour to code: ●R (Red, Port), ●G (Green, Starboard), ❍W (White, Masthead) Function IP67 Code IP67 IP67 Port Starboard Starboard 1.3 1.0 1.3 Output Watts 9-33VDC 9-33VDC Volts 112.5°/±2NM 112.5°/±2NM Angle/Distance 42.7 x 77 x 31.5 42 x 110 x 61 Size (mm) Polycarb Stainless Steel 316 Material Polycarb PMMA Lens *Add colour to code: ●R (Red, Port), ●G (Green, Starboard) Port 1.0 Function IP67 Code Function Output Watts Volts Angle/Distance Size (mm) Material Lens 28 IP67 C2-501 Docking Light Masthead Deck 4.5W 7.5W 9-33VDC 9-33VDC 225°/±3NM 15°/35mt 195 x 140 x 61 248 x 150 x 124.1 PA66 Polycarb Polycarb Polycarb *Add colour to code: ❍W (White, Stern Light), ●A (Amber, Towing Light) LIT ALL Port 0.36W Starboard 0.6W 9-33VDC 112.5° + 112.5°/±2NM 87.5 x 78 x 46.2 Polycarb PMMA IP67 C2-128S Masthead Light Stern Light 2W 9-33VDC 225°/±3NM 87.5 x 78 x 50 Polycarb PMMA 2W 9-33VDC 135°/±3NM 87.5 x 78 x 50 Polycarb PMMA IP67 IP68 C2-504 C2-0502-* C2-128M C2-0510-* C2-503-* IP67 C2-509 Underwater Light 12W 9-33VDC Ø126.5 x 32 Stainless Steel 316 Polycarb C2-0511-* Masthead Deck 1.0W 1.3W 9-33VDC 135°/±2NM 77 x 50 x 18.5 Polycarb Polycarb LOUD SPEAKERS Megaphones GT-1225 GT-125 GT125S Watts Effective Power Source RMS Distance Power Duration Code Description GT-1225 Hand Grip / Shoulder Type Megaphone 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs GT-125 Hand Grip Type without Siren 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs 20 600m UM-2 Dry Cell Batteries (10) ±7 hrs GT-125S Hand Grip Type with Siren Other Speakers SPH-20 CM20/40 WS-10 Input Line Watts Adj. 20 4 OHM 100V 1, 1.25, 2.5, 5, 10, 20 Aluminium Column Speakers weather proof IP65 c/w side mount bracket 40 8 OHM 100V 1, 1.25. 2.5, 5. 10, 20, 40 SPH-20W White Plastic Sphere Ceiling Speaker with 3 metre cable 20 8 OHM 100V 2.5, 5, 10, 20 SPH-20WMT-W White Plastic Sphere Ceiling Speaker with wall mount bracket 20 8 OHM 70/100V 2.5, 5, 10, 20 WS-10 Dual Cone/coaxial wall cabinet speaker complete with back mount box IP21 10 8 OHM 100V 0.25, 0.5, 0.75, 1.5, 3, 6, 10 MR-10 Weather Proof IP66 horn speaker complete with stainless steel bracket 10 8 OHM 100V 1, 3, 5, 10 Adj. Rotary Switch MR-15 Weather Proof IP66 horn speaker complete with stainless steel bracket 15 8 OHM 100V 1, 3, 5, 10, 15 Adj. Rotary Switch MR-30 Weather Proof IP66 horn speaker complete with stainless steel bracket 30 8 OHM 100V 1, 3, 5, 10, 15, 30 Adj. Rotary Switch Description CM-20 Aluminium Column Speakers weather proof IP65 c/w side mount bracket CM-40 Watts RMS These robust, yet elegantly attractive loudspeakers are designed to give high quality sound ­reproduction and can be used in ­airports, churches, small theatres and other places of entertainment. MR-10/15/30 ® Outdoor Speakers TF-35 TF-220 CP-20A CP-20B Imp. Code Q130-5 CP-20 Watts RMS Imp. Input Line Frequency Range Green Lawn Loudspeaker, size: Ø 220 x 420Hmm IP65 20 8 OHM 120V 70-12KHz CP-20B Green Lawn Loudspeaker, Ø 220 x 600Hmm IP65 20 8 OHM 120V 70-12KHz CP-20 Green Lawn Loudspeaker, size: Ø 282 x 340Hmm IP65 20 8 OHM 120V 70-12KHz Q130-5 Ceiling Speaker Ø 170 x 700Hmm 5 8 OHM 120V 95-12KHz TF-35 ABS and Metal Casing. 960H x 190W x 170Dmm 35 8 OHM 120V 70-12KHz TF-220 ABS and Metal Casing. 460H x 220W x 215Dmm 20 8 OHM 120V 70-12KHz Code Description CP-20A ALL 29 LOUD SPEAKERS Horn Speakers KPH-86T KPH-200T-8 KPH-210R PH-711 PH-58 KPH-280 Code Description Watts RMS KPH-86T Black ABS Horn Speaker 15W KPH-200T-8 White ABS Horn Speaker KPH-210R Input Line Watts Adj. 8 OHM – – 15W 8 OHM – – White ABS Horn Speaker 20W 8 OHM – – KPH-280 White ABS Horn Speaker 30W 8 OHM – – PH-58 White ABS Horn Speaker 30W 8 OHM – – PH-711 White ABS Horn Speaker 40W 8 OHM – – Input Line Watts Adj. Imp. Ceiling Speakers WS-631T YX5-44T YX3-33T Watts RMS Code Description WS-631T White Wall Flush/Ceiling Speaker with 10W built-in Line Transformer 230Ø x 74mm 5k, 2.5k, 1667 OHM 100V 2, 4, 6W YX5-44T Ceiling Speaker, Ø 245mm x 110mm, max 10W White 70-12KHz 8W 8 OHM 100V – YX3-33T Ceiling Speaker, Ø 200mm x 115mm, max 8W White 100-12KHz 3W 8 OHM 100V – Imp. Wall-Mount Speakers G165-3 G165-5 CT-315WT1 CS-667WT CS-667WT White Wall Surface/Ceiling Speaker with 6W built-in Line Transformer. 240 x 240 x 115 SPJ-53WHBS White PA Sound Projector Speaker 140 Ø x 187 CT-315WT1 G165-3 SPJ-53WHBS G165-9 Wall Mount Bass Reflex 2-Way Speaker 15W System with Built-in Line Transformer. 180 x 133 x 107mm. Box Speaker Wall Mount. 275H x 200W x 105Dmm BAP-240 W E NE NG A R MIP-60E MIP-120E DV-45PA DV-80PA DV-120PA 30 3W 100V 2, 4, 6W 2k, 1k, 500 OHM 100V 5, 10, 20W 8 OHM 100V 5, 10, 20W 4k, 2k, 1k, 667 OHM 100V 5, 10, 20W 8 OHM/ 20W not going through 200V G165-5 Box Speaker Wall Mount. 275H x 180W x 125Dmm 5W 8 OHM 100V 70-12KHz G165-9 Wall Mount Speaker max 10W 10W 8 OHM 100V 70-12KHz PA Amplifiers BAP-120 20W 5k, 2.5k, 1667 OHM Code Description BAP-120 8A PA Booster Amplifier (19” Rack/Desk-top Mounting) BAP-240 Watts RMS Power Supply Output 120W 115/230VAC 50/60Hz, 24VDC 100V, 70V, 8Ω 15A PA Booster Amplifier (19” Rack/Desk-top Mounting) 240W 115/230VAC 50/60Hz, 24VDC 100V, 70V, 8Ω MIP-60E 4A PA Multi-zones Amplifier (19” Rack/Desk-top Mounting) 60W 115/230VAC 50/60Hz, 24VDC 100V, 70V, 8Ω MIP-120E 8A PA Multi-zones Amplifier (19” Rack/Desk-top Mounting) 5 Channel + Master 120W 115/230VAC 50/60Hz, 24VDC 100V, 70V, 8Ω DV-45PA PA Amplifier 2 Mic + 1 Aux Input 30W 220VAC/12VDC 4, 8, 16 OHM (Without 100V) DV-80PA PA Amplifier 3 Mic + 2 Aux Input 60W 220VAC/1A 12VDC/10A 100V/4, 8, 16 OHM DV-120PA PA Amplifier 3 Mic + 2 Aux Input 120W 220VAC/1.5A 12VDC/10A 100V/4, 8, 16 OHM ALL W MICROPHONES & ACCESSORIES NE Communication Microphone Wall Mount Autoformer Volume Control Code VC-5093P Watts RMS VC-5096P Power Specifications 6 100V 35 100V Volts (V) CM-361VC Code • Designed for Emergency announcements or paging • Mounting depth: 44mm • Works with 4 or 8 OHM Speakers • Material: Plastic front panel with plastic knob VC-5093P/VC-5096P Code With Volume Control Power Rating Impedance (Ω) AUTO 100/5 100 5-2.5-1.25W 2K-4K-8K AUTO 100/12 100 10-5-2.5W 1K-2K-4K Polar Pattern: Uni-Directional Frequency Response: 100-10.000Hz Impedance:600+30% Sensitivity:-69dB+3dB Cord Length: 1.8m • Wide frequency response and low insertion loss Professional 2-Way Speaker System Drivers Frequency Range Power Supply Power Output Size MD-13 Code 12” Woofer + 34mm Horn Tweeter 40-20,000Hz 115VAC/230V 50/60Hz Switchable 200W Rms/250W Max. at 8 ohms 580(L) x 425(H) x 310(D) Plastic tiltable head Fixed with screw head for microphone stand. Features • Priority conversation • Hands-free communication • Stainless Steel Casing • Volume control for teller & customer • Power Source: DC 12V • Dimensions: 155(W) x 43(H) x 130(D)mm • Full manual control • Compact & slim design • Stainless Steel Casing • Built-in Aux output for P.A System • Volume control for teller & customer • Power Source: DC 12V • Power light indicator • OFF and TALK switch • Dimensions: 75(W) x 40(H) x 96(D)mm Specifications for MBI-05/10 Built-in headset and mute functions MC0004 MBI-10 (Pair with MBI-11) Code Features • Built-in mute function and headset function Code • Height extends from 41 to 54cm • 5/8” x 27 thread • Iron cast base • Weight: 0.83kg Teller Main Control Unit MBI-05H (Pair with MBI-03) Microphone Clip Table Top Stand PRO-200AMP Code Code Microphone • Power: DC12V 230mA • Type: Condenser Mic • MIC Hz: 100 - 16 000Hz• Sensitive: -40 ± 2dB Spare Control box Code MBI-10CBOX Code MBI-11 (Pair with MBI-10) Accessories - Customer Units/ Speakers Code MBI-03 (Pair with MBI-05H) 3.5mm Stereo Phone Jack to suit MBI-10 3.5mm Stereo Phone Jack to suit MBI-05H DIGITAL UHF WIRELESS MICROPHONE Dual Channel, True Diversity Wireless Microphone - 32 channel with LCD display Spare Microphone Code EW92KIT Mode Digital diversity Sensitivity <5dB @ S/N ≥ 110dB Frequency 450-900MHz Power 90~260VAC/DC 15V @ 400mA Antenna Receiver x 2 Display LCD Distance 100-180m Kit Includes: UHF Dual Reciever, 2 x Antennas, 2 x Transmitter Microphones, 1 x AC Adaptor ALL Code RF Power Output Volume Control Transmitting Battery Duration Modulation W101 < 30mW 0~15 steps Autoscan - PLL synthesized 9V 8hrs (continuous) ±25KHz 31 Distributors and Franchises throughout Southern Africa P.O. Box 3812, Edenvale 1610, South Africa 26 Nguni Drive Longmeadow Estate West Edenvale, Gauteng South Africa First Edition 2013 AC/DC SFC_AUD Distributed by: info@acdc.co.za Tel: 010 202 3300/087 806 6650 Tel Sales: 010 202 3400/087 806 6660 Tel Technical: 010 202 3500/087 806 6670 Fax: 087 807 5441 www.acdc.co.za