TYPE:
CATALOG #:
NOTES:
Unit Accessories
Vandal Resistant Covers
• Provides protection against tampering, vandalism and accidental
damage.
• Constructed of UV stabilized, unbreakable, noncorrosive, clear
polycarbonate material.
• VRS-4X Models complies with NEMA-4X standards and is
supplied with a self-adhesive, closed-cell neoprene gasket which
forms a bond around the perimeter of the cover to make the unit
dust & water tight. Installs easily to wall or flat surface. Mounting
holes are pre-drilled.
Vandal Resistant COVER
Application: ME Series with top mounted heads; PS
Series all mountings; X10 or X30 Series LED, Incandescent
(wall mounted) AC and AC/DC or Self-Powered exit with no monted
heads; ECL & ECLXN Series LED (wall mounted)
AC and AC/DC or Self-Powered; or Preceptor Series LED,
Incandescent (wall mounted) AC and AC/DC
Outline and Dimensions
Dimensions are approximate and subject to change.
6”
51/8”
151/8”
87/8”
How to Order
51/4”
87/8”
VRS or VRS-4X (NEMA-4X)
143/4”
Vandal Resistant COVER
Application: JS Series (small cabinet) top or front mounted heads;
ME Series with top or side mounted heads; or ECC & ECM Series
(small cabinet)
133/4”
201/3”
8”
211/2”
How to Order
VRS-BB or VRSBB-4X (NEMA-4X)
Mounting Brackets
• 16 gauge steel
• Corrosion resistant undercoat
• Oven baked hammertone finish
• Supplied with rubber stand-offs for unit and machine screws to
secure unit to bracket.
Outline and Dimensions
Dimensions are approximate and subject to change.
A
D
27/8”
C
How to Order
Mouting bracket (whist) - B1 or B2
B
Model
B1
B2
A
10
141/4
1/4”
Dimensions (inches)
B
C
73/4
125/8
21/8
29/32
All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions. Illustrations and diagrams within this specsheet may vary from actual products.
2013© Thomas & Betts Limited. All rights reserved.
D
7
113/4
Mounting Platforms
• 18 gauge steel
• Corrosion resistant undercoat
• Oven baked hammertone finish
• 1/2” retaining lip on three sides.
• Keyhole slots for easy mounting
How to Order
Mouting Plataform - MP3
Mouting Plataform, gray - MP3-GY
Model
MP3
MP6
MP12
MP24
B
163/8
17
271/2
271/2
53/4
73/4
73/4
111/2
Dimensions (inches)
C
D
E
103/16
121/4
121/4
121/4
121/2
16
16
16
15/8
15/8
15/8
15/8
F
G
3/16
5/16
5/16
-
7/16
5/8
5/8
-
Outline and Dimensions
Dimensions are approximate and subject to change.
How to Order
Mounting plataform (whist) MP6, MP12 or MP4
A
F
E
EQ.
D
EQ.
A
D
E
G
G
C
F
C
1/2”
A
B
1/2”
Remote Test Switch
Make testing your ceiling mounted equipment easier with the
remote test switch. Compatible with 120 or 277 VAC circuits, the
remote test switch will interrupt the line voltage to your equipement
by means of a momentary push button switch. AC on/Charge status
indicator lamp assures that power is going to your emergency
lighting.
Outline and Dimensions
Dimensions are approximate and subject to change.
23/4”
How to Order
Metal faceplate, chrome - RTS
Plastic faceplate, off white - RTS/1
41/2”
35/16”
All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions. Illustrations and diagrams within this specsheet may vary from actual products.
2013© Thomas & Betts Limited. All rights reserved.
B