Table of Contents
IPaCS™ Equipment Overview
10-2
Modular Panelboard System (MPS)
10-3
New!
Integrated Power Center (IPC)
10-3
New!
Integrated Power Center 2 (IPC2™)
10-4
IPC2
10-4
IPC2 Transformer Combo
10-4
Standard Transformer Combo Merchandise Configurations
10-5
Integrated Equipment Sample Lineups
10-6
MPS, see page 10-3
IPC, see page 10-3
IPC2, see page 10-4
© 2007 Schneider Electric
All Rights Reserved
10-1
10
Integrated Power and Control Solutions
(IPaCS) Equipment
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
Section 10
IPaCS Equipment
Overview
Class 2200 / Refer to Documents 2230DB0601, 2010CT0001 and 2735CT0001
www.us.schneider-electric.com
FOR CURRENT INFORMATION
Integrated Power and Control Solutions (IPaCS
TM
) Equipment Overview
D®
The Square
family of integrated equipment combines electrical distribution equipment, building controls and
automation into a single factory-assembled and pre-wired enclosure. Our innovative, cost-effective, integrated solutions
save valuable floor space, shorten construction cycle times and reduce installation and material handling costs.
Integrated lineups are tailored to customer specifications and can be customized to include third party components,
such as building management automation and controls.
Modular Panelboard System (MPS)
Pre-Engineered Solution
The Modular Panelboard System is tailored to customer specifications and may include panels, transformers and
lighting control. An MPS is applicable when third-party building control systems are not required. Special interiors are
available such as column width and Powerlink®. Options may include power and control cable wiring, contactors,
terminal blocks, TVSS and equipment space. MPS sections are 86 in. (2184 mm) high x 9.5 in. (241 mm) deep. Widths
vary depending upon customer specifications.
New!
Integrated Power Center (IPC)
10
Custom-Designed Solution
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
For more complex designs, the Integrated Power Center allows for the integration of a variety of controls, including
electrical distribution equipment, HVAC controls, lighting controls, power quality and power conditioning products,
surge suppression and building management systems. As with all integrated solutions, they meet applicable codes
and standards and are shipped to the site fully-assembled, completely pre-tested and ready to install. IPC sections
are 84 in. (2134 mm) high x 10.25 in. (260 mm) deep. Widths vary depending upon customer specifications.
New!
Integrated Power Center 2 (IPC2™)
The newest addition to the family of integrated solutions, the Integrated Power Center 2 (IPC2™) provides maximum
flexibility to meet customers’ specifications. Features include those found in the IPC and are provided in a free-standing
enclosure that can be front and rear aligned when transformers are included. Enclosure options include NEMA 1, NEMA 1
with driphood and NEMA 3R.
New!
IPC2 Transformer Combo
Ideally suited for projects having both 480Y/277 V and 208Y/120 V requirements. Available as a standalone solution or
can be incorporated into an MPS, IPC or IPC2 line-up. The 42 in. (1067 mm) wide x 24 in. (610 mm) deep footprint will
decrease space requirements by 40% or more.
Additional savings are realized on installation, material costs and material handling, shown in the table below.
Table 10.1:
IPC2 Transformer Combo—Savings Realized
Estimated Installation Hours
Materials Saved
No. of Pieces Handled
Stick-Built
Transformer Combo
26–32
3–6
Savings Realized
23–26
Associated pipe, wire and fittings
—
Associated pipe, wire and fittings
20–30
1
19–29
The IPC2 Transformer Combo has been recognized by the electrical industry by winning the following awards:
•
•
10-2
2006 INNOVATION Award given by the Electrical Contracting Products magazine.
2006 Product of the Year Gold Medal Award given by the Consulting/Specifying Engineer magazine.
© 2007 Schneider Electric
All Rights Reserved
IPaCS Equipment
www.us.schneider-electric.com
Modular Panelboard System and Integrated Power Center
Class 2210 and Class 2220 / Refer to Documents 2010CT0001 and 2735CT0001
FOR CURRENT INFORMATION
Modular Panelboard System (MPS)
The pre-engineered MPS consists of a mix of NQOD, NF and I-Line® interiors, transformers
and lighting control. It is applicable when third-party building control systems are not required.
Special interiors are available such as column width and Powerlink®. Options include power and
control cable wiring, contactors, terminal blocks, TVSS and equipment space.
Equipment space options include factory-installed lighting contactors in three
configurations:
1. Unwired: Mounted in cell only
2. Line side wired: Line side of each pole is wired to a branch circuit breaker
3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each
pole wired to a terminal block
Built on a panelboard platform, MPS sections are NEMA 1 rated and meet the requirements
of UL 67. Individual sections are 86 in. (2184 mm) high x 9.5 in. (241 mm) deep; widths vary
from 10 in. (254 mm) to 44 in. (1118 mm).
Layout/Lead Time/Pricing:
Shipping:
Integrated equipment line-ups are shipped as a factory-assembled, pre-wired system.
Customers may specify single or multiple section shipping splits (some limitations apply). In
addition, lineups may be ordered with or without factory-installed power cables.
Integrated Power Center (IPC)
New!
The custom-designed Integrated Power Center allows for greater design flexibility with the
integration of a variety of controls, including:
• Electrical distribution
• Power quality
• Building automation
• Surge suppression
• Lighting controls
• HVAC controls
MPS Interior
Integrated Power Centers are NEMA 1 rated and meet the requirements of UL 891. As with all
integrated solutions, IPCs are shipped to the site fully-assembled, completely pre-tested and
ready to install. IPC sections are 84 in. (2134 mm) high x 10.25 in. (260 mm) deep; widths vary
depending upon customer specifications.
Individual IPC configurations include NF, NQOD or I-Line panel sections in full height,
stacked or side-by-side arrangements. In addition, combination sections combine electrical
distribution panels with equipment space for building controls.
Equipment space options include factory-installed lighting contactors in three
configurations:
1. Unwired: Mounted in cell only
2. Line side wired: Line side of each pole is wired to a branch circuit breaker
3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each
pole wired to a terminal block
Layout/Lead Time/Pricing:
Contact your nearest field sales office.
Shipping:
Integrated Power Center
Integrated equipment line-ups are shipped as a factory-assembled, pre-wired system.
Customers may specify single or multiple section shipping splits (some limitations apply).
In addition, lineups may be ordered with or without factory-installed power cables.
IPC Interior
© 2007 Schneider Electric
All Rights Reserved
10-3
10
Modular Panelboard System
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
Contact your nearest field sales office.
IPaCS Equipment
Integrated Power Center 2 (IPC2™)
Class 2230 / Refer to Documents 2230HO0601 and 2230DB0601
www.us.schneider-electric.com
FOR CURRENT INFORMATION
Integrated Power Center 2 (IPC2™)
New!
The IPC2 provides maximum design flexibility. In addition to the features found in the
Integrated Power Center, IPC2 lineups are free-standing enclosures that can be front- and
rear-aligned when transformers are included.
•
•
•
•
NEMA 1, NEMA 1 with driphood and NEMA 3R enclosure options
Free-standing sections that can be close-coupled to QED switchboards
UL 891 – Deadfront switchboard construction
Seismically qualified to meet IBC and ASCE 7
Equipment space options include factory-installed lighting contactors in three
configurations:
1. Unwired: Mounted in cell only
2. Line side wired: Line side of each pole is wired to a branch circuit breaker
3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each
pole wired to a terminal block
Integrated Power Center 2
Layout/Lead Time/Pricing:
Contact your nearest field sales office.
10
Shipping:
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
Integrated equipment line-ups are shipped as a factory-assembled, pre-wired system.
Customers may specify single or multiple section shipping splits (some limitations apply).
In addition, lineups may be ordered with or without factory-installed power cables.
IPC2 Transformer Combo
New!
A member of the IPC2 family, the Transformer Combo has been recognized wide for its
innovative design. It integrates panelboards, individually-mounted circuit breakers or
lighting contactors with a dry-type transformer into one factory-assembled and pre-wired
solution. All are housed in a space-saving 42 in. (1067 mm) wide x 91.5 in. (2324 mm)
high x 24 in. (610 mm) deep enclosure.
The Transformer Combo is ideally suited for projects having both 480Y/277 V and
208Y/120 V requirements and is applicable where panels and a transformer are in close
proximity. As a standalone solution, the Transformer Combo provides the flexibility to
enter and/or exit the section from either the top or bottom. It can also be incorporated into
an MPS, IPC or IPC2 lineup.
Transformer Combo
10-4
© 2007 Schneider Electric
All Rights Reserved
IPaCS Equipment
Integrated Power Center 2 (IPC2™)
www.us.schneider-electric.com
Class 2230 / Refer to Documents 2230HO0601 and 2230DB0601
FOR CURRENT INFORMATION
Standard Transformer Combo Merchandise Configurations
The IPC2 Transformer Combo is available in four standard merchandise configurations, as shown below (additional configurations are available; contact
your nearest field sales office).
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
43114-553-01
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXX
43114-553-01
43114-553-01
IPC2TC-1EE
IPC2TC-2EE
IPC2TC-3EE
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
43114-553-01
IPC2TC-4EE
NOTE: All sections can be fed from the top or bottom.
Standard Transformer Combo Configuration Specifications
Catalog No. IPC2TC-1EE
NF Panel
480Y/277 3Ø4W
225/3 MB 18k AIC
208Y/120 V 3Ø4W
225/3 MB 10k AIC
1–125/3 (Transformer)
20–20/1 Branch Breakers
20–20/1 Branch Breakers
19–1PSO
Copper Bus/Ground Bus
SUSE
22–1PSO
Copper Bus/Ground Bus
NQOD Panel
Transformer
480 V–208Y/120 V 3Ø
75 kVA
Energy Efficient transformers in compliance with the 2005 Energy
Act.
150 °C Temp Rise
Aluminum Windings
6–2.5% Taps; 2+ 4-
NQOD Panel
Transformer
480 V–208Y/120 V 3Ø
75 kVA
Energy Efficient transformers in compliance with the 2005 Energy
Act.
150 °C Temp Rise
Aluminum Windings
6–2.5% Taps; 2+ 4-
NQOD Panel
Transformer
480 V–208Y/120 V 3Ø
112.5 kVA
Energy Efficient transformers in compliance with the 2005 Energy
Act.
150 °C Temp Rise
Aluminum Windings
6–2.5% Taps; 2+ 4-
NQOD Panel
Transformer
480 V–208Y/120 V 3Ø
75 kVA
Energy Efficient transformers in compliance with the 2005 Energy
Act.
150 °C Temp Rise
6–2.5% Taps; 2+ 4-
Catalog No. IPC2TC-2EE
NF Panel
480Y/277 3Ø4W
400 A MLO 18k AIC
208Y/120 V 3Ø4W
225/3 MB 10k AIC
1–125/3 (Transformer)
20–20/1 Branch Breakers
20–20/1 Branch Breakers
19–1PSO
Copper Bus/Ground Bus
SUSE
Catalog No. IPC2TC-3EE
22–1PSO
Copper Bus/Ground Bus
(X) Transformer Primary Breaker (P) Panel Main Breaker
175 A 3P 480 V 35k AIC
400 A 3P 240 V 10k AIC
SUSE
208Y/120 V 3Ø4W
400 A MLO 10k AIC
20–20/1 Branch Breakers
22–1PSO
Copper Bus/Ground Bus
Catalog No. IPC2TC-4EE
NQOD Panel
208Y/120 V 3Ø4W
225/3 MB 10k AIC
208Y/120 V 3Ø4W
225 A MLO 10k AIC
20–20/1 Branch Breakers
20–20/1 Branch Breakers
22–1PSO
Copper Bus/Ground Bus
FT Lugs
22–1PSO
Copper Bus/Ground Bus
© 2007 Schneider Electric
All Rights Reserved
10-5
10
Table 10.2:
IPaCS Equipment
Sample Lineups
Class 2200 / Refer to Documents 2230DB0601 and 2010CT0001
www.us.schneider-electric.com
FOR CURRENT INFORMATION
Integrated Equipment Sample Lineups
NQOD
NQOD
NF
NQOD
I-Line
NQOD
I-LINE
I-Line
NQOD
NQOD
NF
Modular Panelboard System
208Y/120 V
Modular Panelboard System with
IPC2 Transformer Combo
480Y/277 V System and 208Y/120 V System
10
INTEGRATED POWER AND
CONTROL SOLUTIONS (IPACS)
EQUIPMENT
-NQOD
-
NQOD
-
-
NQOD
-
1200 Amp
I-Line
NQOD
-
Equipment
Space
Equip.
Space
NQOD
-
Equipment
Space
Integrated Power Center
208Y/120 V
NF
-
- NF
-
1200 Amp
I-Line
- NF
-
- NF
-
NF
-
NF
-
NQOD
-
NQOD
1200 Amp
I-Line
75 kVA
Integrated Power Center with IPC2 Transformer Combo
80Y/227 V System and 208Y/120 V System
-NQOD
-
-
75 kVA
- 800
Amp
- I-Line
Stacked
Transformer
Assembly
-NQOD
-
NQOD
-NQOD
-
225 kVA
-
- NQOD
-
75 kVA
Integrated Power Center with Stacked Transformer
480Y/277 V System and 208Y/120 V System
NF
NF
-
NQOD
I-Line
75 kVA
IPC2 Transformer Combo and Integrated Power Center
480Y/277 V System and 208Y/120 V System
Main Circuit
Breaker
NF
I-Line
NQOD
NF
NQOD
I-Line
75 kVA
75 kVA
Switchboard and IPC2 Transformer Combo
480Y/277 V System and 208Y/120 V System
10-6
© 2007 Schneider Electric
All Rights Reserved