Signal Tower
SW
Sensor
LHE-E3 / LE-E3 / WEP-E3
Sensor
ASi master
LHE-E3
LE-E3
WEP-E3
PLC
ASi power supply
DC 24V
power supply
Signal tower can co-exist with other devices on a single ASi cable.
All other ASi models require an auxiliary power supply.
Dimensions
LHE-E3
LE-E3
LED
90dB at 1m
Direct mount
50
Red
Red
Amber
Amber
Green
Green
Approx 90
Amber
12
ASi auxiliary power cable type
ASi auxiliary power cable type
LHE-E3
LHE-E3B
WEP-E3
WEP-E3B
· Clear Vertical Cut Lens: For enhanced
illumination over a wide perspective.
· Sound Pattern: Continuous beep up to 90dB
at 1m.
· Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type:
alarm at the bottom.
30
33
254
20
44.5
4- 5
30
12.5
0°
0°
0°
12
30
Pole hole 17.3
Wire entry hole 13
Name plate
2- 9
IP65
Direct mount
· Original Dual Reflection System: For enhanced
light diffusion, creating bright distinctive
illumination while saving energy (Patent
Pending).
· Sound Pattern: Short beep up to 85dB at
1m.
· Installation: Upright and indoors only.
Mounting hole
3- 4
12
12
Profile
37.5mm
Side-Mount Bracket
Front
0°
40
Mounting Dimension
Mounting hole
3- 5
Wire entry hole 20
Approx 90
57
20 27
Wire entry hole 14
74
32
Mounting Dimension
ASi auxiliary power cable type
LE-E3P
LE-E3BP
Approx 1500
Approx 1200
Name plate
Pole mount
M17 P1.5
Approx 90
Approx 1500
Direction of audible alarm
· Sound Pattern: Short beep up to 90dB at
1m.
· Installation: Upright and indoors only.
· LHE-E: Add ASi power cable for more than 2A.
3-M3
Approx 90
*Refer to the standard non-field bus model for details.
LE-E3W
LE-E3BW
17.3
Max. panel thickness 8
ASi supported Signal Tower for Open-field Network
ø50 IP54
176
Buzzer hole (B type)
Volume
3-M4
ø70 IP65
30
Green
WEP-E3 type
E-type: Uses ASi cable and ASi auxiliary power cable for larger systems more than 2A.
Easy Connection: Direct connection to a linked ASi interface with ASi cable, without I/O terminals.
Required Device: ASi-type controller (i.e. ASi master).
Data Storage: Addresses stored in EPROM by an address input device.
Lighting Pattern: Continuous only, no flashing.
B type: Built-in alarm; LHE: 90dB at 1m (adjustable), LE: 85dB at 1m (adjustable), WEP: 90dB at 1m.
Interchangeable modules*: No re-wiring even after installation, except for WEP type.
Amber
150
LE-E3 type
20
294
LHE-E3 type
Approx 1500
Red
265
Green
Max. panel
thickness 5
·
·
·
·
·
·
·
37.5
3
(LE type: IP54)
Pole mount
50
90
Red
Electronic
Sound
1
IP65
WEP-E3
70
(LE type: 85dB at 1m)
9
I/O terminal
ASi Supported
ASi Supported
265
ASi Supported
Application Example
Buzzer type required to be installed vertically
with the buzzer outlet downward.
(mm)
Color of lead wire ASi auxiliary power cable type
BROWN
AS-i+
BLUE
AS-iAuxiliary power supply 24V DC
WHITE
Auxiliary power supply 0V
BLACK
LHE-E3 / LE-E3 / WEP-E3 type
Number of
stacks
Model
Power supply required
for LED Modules
Audible
alarm
ASi
power supply
Auxiliary
power supply
ASI PCB
(Max.)
Current consumption
LED Module
(Max.)
Audible alarm
(Max.)
50mA (Red,Amber)
N/A
LHE-E3
40mA (Green)
40mA
available
LHE-E3B
N/A
25mA (Red,Amber)
30V
LE-E3W/LE-E3P
ASi auxiliary power supply
24V DC
60mA
20mA (Green)
(AS-i+ AS-i-)
40mA
available
LE-E3BW/LE-E3BP
N/A
30mA (Red,Amber)
WEP-E3
25mA
(Green)
40mA
available
WEP-E3B
Total current consumption of all devices (LED and buzzer elements) must not exceed 200mA when operating more than three towers on the network. If the 200mA limit is exceeded, the ASi
auxiliary power cable type is required. Patlite’s standard signal tower for field bus application is the three-light style.
3 Lights
Red
Amber
Green
( )
10
LE-C3 type
LHE-C3 type
WEP-C3 type
LHE-C3 / LE-C3 / WEP-C3
CC-Link
Master
Remote I/O
Remote I/O
CC-Link
Master
Remote I/O
Remote I/O
PLC
PLC
CC-Link stack light without terminating resistor can be branched
using a terminal block in case a repeater is not used.
Dimensions
LHE-C3
LHE-CT3
LED
90dB at 1m
Electronic
Sound 2
LE-C3
LE-CT3
Direct mount
Pole mount
50
50
Red
Red
Amber
Amber
Green
Green
Red
30
176
20
30
294
Amber
Green
Window for
Address Change
Window for Address Change
WEP-C3 type
Buzzer hole (B type)
Volume
Approx 90
Approx 1500
12.5
0°
12
LE-C3P
LE-C3BP
· Original Dual Reflection System: For enhanced
light diffusion, creating bright distinctive illumination while saving energy (Patent Pending).
· Sound Pattern: Intermittent tone, up to 85dB at
1m.
2 Selections: 1) fast beep; 2) slow beep
· Installation: Indoors and upright only.
· Options Available: Direct or pole mount.
20
30
32
Pole hole 17.3
0°
0°
Pole mount
Mounting hole
3- 4
12
12
Name plate
Direction of audible alarm
LE-C3W
LE-C3BW
Side-Mount Bracket
Front
Mounting hole
3- 5
0°
40
Mounting Dimension
4- 5
44.5
30
Wire entry hole 13
57
20 27
Wire entry hole 14
2- 9
Profile
37.5mm
· Clear Vertical Cut Lens: For enhanced
illumination over a wide perspective.
· Sound Pattern: Continuous up to 90dB at
1m.
· Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type:
alarm exit must face downward.
Buzzer type required to be installed vertically
with the buzzer outlet downward.
(mm)
Wire Color
BLUE
WHITE
YELLOW
(NONE)
C3: Without terminal resistor
CT3: Built-in terminal resistor
WEP-C3
WEP-C3B
Wire entry hole 20
150
Mounting Dimension
74
Approx 90
Approx 1200
Name plate
Direct mount
M17 P1.5
Approx 90
Approx 1500
*Refer to the standard non-field bus model for details.
ø50 IP23
33
3-M3
12
· Single Cable: Regulates electrical power and control signals.
· Easy Connection: Direct connection to a linked CC-Link interface with CC-Link cable, without I/O terminals, up to 64 units.
· Required Device: CC-Link-type controller (i.e. CC-Link master).
· Data Storage: Addresses set by dip switch.
· Lighting Pattern: Continuous only, no flashing.
· B type: Built-in alarm; LHE: 90dB at 1m (adjustable), LE: 85dB at 1m (adjustable), WEP: 90dB at 1m,
· Interchangeable modules*: No re-wiring even after installation, except for WEP type.
17.3
Max. panel thickness 8
3
LE-C3 type
254
LHE-C3 type
CC-Link supported Signal Tower for Open-field Network
· Sound Pattern: Intermittent tone, up to 90dB at
1m.
2 Selections: 1) fast beep; 2) slow beep
· Installation: Upright and indoors only.
Approx 1500
Red
265
Green
3-M4
LHE-C3
LHE-C3B
Approx 90
Amber
Max. panel
thickness 5
ø70 IP23
37.5
90
(WEP type: 1 sound)
IP23
WEP-C3
WEP-CT3
70
(LE type: 85dB at 1m)
11
Repeater
(T-branch)
Remote I/O
CC-Link Supported
CC-Link Supported
265
CC-Link Supported
Application Example
Signal
DA
DB
DG
SLD
LHE-C3 / LE-C3 / WEP-C3 type
Number of
stacks
Model
Audible
alarm
N/A
LHE-C(T)3
available
LHE-C(T)3B
N/A
LE-C(T)3W/LE-C(T)3P
available
LE-C(T)3BW/LE-C(T)3BP
N/A
WEP-C(T)3
available
WEP-C(T)3B
Patlite’s standard signal tower for field bus application is the 3-light style.
3 Lights
Red
Amber
Green
( )
Signal Line
CC-Link PCB
(Max.)
Current consumption
LED Element
(Max.)
25mA (Red, Amber) 20mA (Green)
DA, DB, DG, SLD
50mA
50mA (Red, Amber) 40mA (Green)
30mA (Red, Amber) 25mA (Green)
Audible alarm
(Max.)
40mA
40mA
40mA
12
SW
Sensor
LHE-D3 / LE-D3 / WEP-D3
DeviceNet master
LHE-D3
LE-D3
WEP-D3
PLC
DC 24V
power supply
I/O terminal
Signal tower can co-exist with other devices on a single DeviceNet cable.
Dimensions
LHE-D3
LE-D3
LED
90dB at 1m
Electronic
Sound 2
WEP-D3
Direct mount
70
Pole mount
50
50
Red
Red
Amber
Amber
Green
Green
37.5
90
Red
(LE type: 85dB at 1m)
Approx 90
Amber
30
176
20
30
Amber
Green
Window for
Address Change
(WEP type: 1 sound)
Approx 1500
Red
265
265
Green
DeviceNet Supported
DeviceNet Supported
294
DeviceNet Supported
Application Example
Window for Address Change
WEP-D3 type
Buzzer hole (B type)
Volume
Approx 1500
Mounting Dimension
LE-D3
LE-D3B
Pole mount
LE-D3P
LE-D3BP
· Original Dual Reflection System: For enhanced
light diffusion, creating bright distinctive illumination while saving energy (Patent Pending).
· LE-D3B: Intermittent tone, up to 85dB at 1m.
2 Selections: 1) fast beep; 2) slow beep
· Installation: Indoors and upright only.
· Options Available: Direct or pole mount.
13
20
32
12
12.5
0°
12
4- 5
44.5
30
Wire entry hole 13
2- 9
Profile
· Clear Vertical Cut Lens: For enhanced
illumination over a wide perspective.
· Sound Pattern: Continuous tone up to 90dB at
1m.
· Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type:
alarm exit must face downward.
Buzzer type must be installed vertically
with the buzzer outlet downward.
Wire Color
RED
WHITE
(NONE)
BLUE
BLACK
37.5mm
WEP-D3
WEP-D3B
Wire entry hole 20
30
Pole hole 17.3
0°
0°
· Sound Pattern: Short beep or long beep up
to 90dB at 1m.
· Installation: Upright and indoors only.
Direct mount
Mounting hole
3- 4
12
12
Name plate
Direction of audible alarm
LHE-D3
LHE-D3B
Side-Mount Bracket
Front
Mounting hole
3- 5
0°
40
Mounting Dimension
57
20 27
Wire entry hole 14
74
Approx 90
Approx 1200
Name plate
ø50 IP23
M17 P1.5
Approx 90
Approx 1500
*Refer to the standard non-field bus model for details.
ø70 IP23
3-M3
Approx 90
DeviceNet Supported Signal Tower for Open-field Network
· Single Cable: Uses DeviceNet cable only, which transfers power and signals for control.
· Easy Connection: Directly connect up to 64 linked DeviceNet units with DeviceNet cable, without I/O terminals.
· Required Device: DeviceNet-type controller (i.e. DeviceNet master).
· Data Storage: Addresses set by dip switch.
· Light Pattern: Continuous only, no flashing.
· B type: Built-in alarm; LHE: 90dB at 1m (adjustable), LE: 85dB at 1m (adjustable), WEP: 90dB at 1m.
· Sound Pattern: LHE / LE: Intermittent tone, Alarm 1: short beep, Alarm 2: long beep. WEP: 1 alarm, continuous tone only.
· Interchangeable modules*: No re-wiring even after installation, except for WEP type.
17.3
Max. panel thickness 8
3-M4
33
Max. panel
thickness 5
150
LE-D3 type
3
LHE-D3 type
254
IP23
(mm)
Signal
V+ (24V DC)
CAN - H
DRAIN
CAN - L
V - (0V)
LHE-D3 / LE-D3 / WEP-D3 type
Number of
stacks
Model
Audible
alarm
Signal Line
DeviceNet PCB
(Max.)
N/A
LHE-D3
available
LHE-D3B
N/A
LE-D3W/LE-D3P
V+ (24V DC) , CAN - H ,
60mA
available
DRAIN , CAN- L , V- (0V)
LE-D3BW/LE-D3BP
N/A
WEP-D3
available
WEP-D3B
Electric power is supplied by DeviceNet cable. Patlite’s standard signal tower for field bus application is the 3-light style.
3 Lights
Red
Amber
Green
( )
Current consumption
LED Element
(Max.)
50mA (Red, Amber) 40mA (Green)
25mA (Red, Amber) 20mA (Green)
30mA (Red, Amber) 25mA (Green)
Audible alarm
(Max.)
40mA
40mA
40mA
14
ø25
Signal Tower
Height
Max. panel thickness
10
ME:200
(MES:40)
Height (mm)
1 Light: 240
2 Lights: 270
3 Lights: 300
4 Lights: 330
5 Lights: 360
Optional mounting bracket
(SZ-013)
Electrical nut
(PF1/2)
Height (mm)
1 Light: 80
2 Lights: 110
3 Lights: 140
4 Lights: 170
5 Lights: 200
Lead wire length
(from wire exit)
ME-A: 300mm
MES-A: 460mm
Bolt (M8)
Nut
(mm)
(Special order)
ø25
Wiring Diagram
IP42
Signal line voltage and current per LED module
5
Rated Signal Line
Voltage Voltage
4
NPN
Open collector
3
2
MES-A
1
ME-A
• PATLITE's Exclusive Hybrid Prism-Cut Lens: For enhanced visibility from any direction and distance.
• Enhanced Illumination: Special high intensity illumination design.
• Installation: Direct mount with a single hole.
• Interchangeable Modules: No re-wiring even after installation.
• Main Body: Corrosion resistant anodized aluminum for retaining its external beauty.
• Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
• Available Colors: Red, Amber, Green, Blue, Clear/White.
• Body Length: MES 40mm, ME 200mm.
For continuous light
LED R Red
LED A Orange
Fuse 1A
Yellow
The wiring remains the same.
Each color of LED module corresponds to the
lead wire color.
Power
supply
Green
Green
Blue
Blue
Clear
White
24V DC: NPN Transistor
NPN Transistor
Transistor Capacity
ME/MES
R,O,G,B,C
Model
Transistor
(NPN)
Current Capacity
Ic>0.1A
For continuous light
–
Number of stacks
If the number of LED
module is changed, center
shaft must be purchased.
Red
Orange
ME/MES: positive(+) on yellow.
Fuse 1A
ME-A / MES-A type
Easy to add
or remove
R, A: 25mA
G, B, C: 20mA
Red
Amber
+
+ 24V DC
Available by Special Order
• Cabtire Cable: Versatile and flexible 3m cable.
• Body Length: MEL 500mm.
• IP54 (for MES / ME / MEL).
• PNP compatible: ME 24V type.
• UL type (E215660).
· Changeable color sequence: Easy to add/remove
up to 5 colored modules even after installation.
· Note: LED modules of the same color will
light up simultaneously.
24V DC
Color of LED Unit Color of Lead Wire
–
LED C White
Yellow
Interchangeable LED modules
24V DC
ME-A/MES-A
Signal Line
Current
LED G Green
LED B Blue
Super slim φ25mm Signal Tower with rust-free aluminum body,
ideal for small devices.
1 Light
Model
Rated Voltage
0.6W
ME/MES-102A-Y
0.6W
24V DC
ME/MES-102A-B
0.5W
0.5W
1.1W
ME/MES-202A-RC
1.1W
ME/MES-402A-RYGB
ME: Standard body
MES: Short body
Stack
1~5
Rated Voltage
02: 24V DC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
1.7W
1.7W
24V DC
2.3W
2.3W
ME/MES-402A-RYGC
ME/MES-502A-RYGBC
ME-502A-RYGBC
1.7W
24V DC
ME/MES-302A-RYC
4 Lights
1.1W
ME/MES-202A-RB
ME/MES-302A-RYB
IL<0.1mA
1.2W
24V DC
ME/MES-302A-RYG
3 Lights
0.5W
ME/MES-102A-C
ME/MES-202A-RG
Vc>35V
Current Leakage
Power Consumption
ME/MES-102A-R
ME/MES-102A-G
Withstand Voltage
How to order
ME/MES-202A-RY
2 Lights
5 Lights
15
Mounting hole
ø22
ME-A type
MES-A type
LED
Cabtire
Electrical nut
ME-A / MES-A
10
ME-A / MES-A
9
ME-A / MES-A
Dimensions
24V DC
2.8W
16
Washer
MP type
ø30
Height (mm)
1 Light: 265
2 Lights: 300
3 Lights: 335
4 Lights: 370
5 Lights: 405
Max. panel
thickness 5
ø22.5
2
35
Signal Tower
ø30
MP / MPS
10
MP / MPS
10
Nut (M22 x P1.5mm)
MPS type
Height
Height (mm)
1 Light: 90
2 Lights: 125
3 Lights: 160
4 Lights: 195
5 Lights: 230
LED
Cabtire
ø22
31
Optional mounting bracket
(SZ-013)
Bolt (M8)
17
Nut (M8)
(Special order)
ø30
(mm)
Lead wire length (from wire exit)
MP: 1,000mm
MPS: 1,180mm
Wiring Diagram
IP65
Signal line voltage and current per LED module
5
Rated
Voltage
4
NPN/PNP
Open collector
3
2
MPS
MP
1
MP/MPS
Signal Line
Current
Signal Line
Voltage
24V AC/DC
R,A: 30mA
G,B,C: 25mA
24V DC
High intensity
LED
Fuse 1A
Yellow
Good visibility
from any direction
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Interchangeable LED modules
· Changeable color sequence: Easy to add/remove
up to 5 colored modules even after installation.
· Note: LED modules of the same color will
light up simultaneously.
Easy to add
or remove
If the number of LED
module is changed, center
shaft must be purchased.
Red
Orange
Green
Green
Blue
Blue
Clear
White
Power
supply
MP/MPS has no polarity.
24V DC: NPN / PNP Transistor
NPN Transistor
PNP Transistor
Transistor Capacity
Fuse 1A
R, O, G, B, C
MP/MPS
+ 24V DC
For continuous light
For continuous
light
R, O, G, B, C
–
Yellow
Available by Special Order
· Cabtire Cable: Versatile and flexible 3m cable.
· All Clear Lens: Distinctive color recognition when operated (B0438 type).
· UL type (E215660).
Red
Amber
LED C White
Super slim Φ30mm silver body Signal Tower
ideal for small devices.
· PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and
distance.
· Double Insulation: For enhanced durability and safety in the work environment.
· Installation: Direct mount with a single hole.
· Interchangeable LED module: No re-wiring even after installation.
· Main Body: Superior impact and heat resistant ABS resin.
· Lens: Superior weather resistant and light translucent AS resin.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Color of LED Unit Color of Lead Wire
For continuous light
LED R Red
LED A Orange
LED G Green
LED B Blue
Patented reflection
system increases
visibility.
27
Mounting
hole
MP:220
(MPS:45)
MP / MPS
Dimensions
Fuse 1A
+ 24V DC
Yellow
–
MP / MPS type
Model
Transistor
(NPN/PNP)
Current Capacity
Ic>50mA
Withstand Voltage
Vc>35V
Current Leakage
IL<0.1mA
How to order
Number of stacks
Model
Rated Voltage
Power Consumption
1 Light
MP/MPS-102
24V AC/DC
0.7W
2 Lights
MP/MPS-202
24V AC/DC
1.4W
3 Lights
MP/MPS-302
24V AC/DC
2.0W
4 Lights
MP/MPS-402
24V AC/DC
2.6W
5 Lights
MP/MPS-502
24V AC/DC
3.2W
MP-502-RYGBC
MP: Standard body
MPS: Short body
Stack
1~5
Rated Voltage
02: 24V AC/DC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Clear lens type: model no. with B0438
The
Thewiring
wiring remains the same.
remains the
Each
color of LED module corresponds to the
same.
lead wire color.
17
18
WE / WEP
WE / WEP
Mounting Dimension
37.5
Wire Entry Hole ø12
74
8.5
90
Slim Wall-Mount Signal Tower
1000
P
30
30
Height
30
30
Ivory White Body
WEP Type
20
WE / WEP
Dimensions
Chrome Plated Body
WE Type
4–ø4.2
LED
Height (mm)
3 Lights: 176
4 Lights: 206
5 Lights: 236
90dB at 1m
Electronic
Sound 2
IP65
P (mm)
3 Lights: 150
4 Lights: 180
5 Lights: 210
(mm)
(FB type)
(FB type)
(FB type: IP54)
IP65 construction is safe
for installation in damp
locations, dusty factories and
outdoor environments.
NPN/PNP
Open collector
Ultra slim half-moon shaped Signal Tower offers seamless
integration with most equipment.
·
·
·
·
·
·
·
·
·
·
Clear Vertical Cut Lens: For enhanced illumination over a wide perspective.
FB type: Built-in audible alarm with 90dB at 1m.
Installation: Vertical and horizontal.
Body Color: Chrome plated or ivory white.
Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
NPN/PNP Compatible: Direct connection to PLC (24V DC ONLY)
Lighting Pattern: Flashing and Continuous.
Dust-proof and waterproof IP65 (except for FB type: IP54).
UL type: Available as special order (E215660)
Available Colors: Red, Amber, Green, Blue, Clear/White.
Wiring Diagram
Note: See page 128 for wiring diagram
WE / WEP type
Number of stacks
Model
Rated Voltage
Power Consumption
Mass
WE(P)-302
24V AC/DC
1.7W
0.26kg
WE(P)-302FB
24V AC/DC
2.7W
0.30kg
3 Lights
37.5 mm
Super-thin design !
New and exclusive LED lighting
design (patent pending) PAT.P
Patlite has perfected a
37.5mm-thin design that
significantly enhances
integration with the
equipment as a built-in
signal system.
Conventional design
19
4 Lights
Patlite has created a revolutionary
lighting design (patent pending) in
which multiple LEDs project light
across a broad peripheral area,
ensuring equal intensity at the
sides as well as the front. This
design, with its side-projection
technology, is a unique
achievement in signal light design.
How to order
WE(P)-402
24V AC/DC
2.0W
0.31kg
WE(P)-402FB
24V AC/DC
3.2W
0.35kg
WE(P)-502
24V AC/DC
2.7W
0.31kg
WE(P)-502FB
24V AC/DC
3.7W
0.35kg
5 Lights
FB type: approx 60 flashes per minute
WEP-302FB-RYG
Body color
WE: Chrome plated
WEP: Ivory white
Stacks
3~5
Rated Voltage
02: 24V AC/DC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Type
Blank: Continuous light
FB: Continuous or flashing
light with audible alarm
Model WE/WEP
20
Silver Color Body
LCE-U Type
12
ø40
LCE-W type
LCE-UW type
ø40
35
Signal Tower
LCE type
LCE-U type
Standard
Mounting Bracket
SZ-012
Side-Mount Bracket
Pole hole ø17.3
Height
LCE type
LCE-U type
44.5
3
27
57
20
112*
(LCE-U type only)
2- ø9
Mounting Dimension
(253)
Audible alarm
3-1
20°
ø17.3
Max. panel thickness 10
Height (mm)
1 Light: 213
2 Lights: 248
3 Lights: 283
4 Lights: 318
5 Lights: 353
Mounting Bracket
SZ-021
Mounting hole 3- ø4
(mm)
5
(FB type)
LCE-M2FB type
Height (mm)
1 Light: 158
2 Lights: 193
3 Lights: 228
4 Lights: 263
5 Lights: 298
13
LED
Cabtire
85dB at 1m
Electronic
Sound 2
Ivory White Body
LCE Type
32
Height
30
Optional
Mounting Bracket
SZ-011
ø30
Wire entry hole ø12
*M2-FB type:167
Name plate
LCE / LCE-U
LCE / LCE-U
12
27
LCE / LCE-U
21
Dimensions
(FB type)
ø40
Wiring Diagram
Continuous only
IP65
AC/DC 24V
AC 90~250V
(LCE-FB type IP54)
Continuous
LED, R Red
LED, A Orange
LED, G Green
LED, B Blue
LED, C White
NPN/PNP
Open collector
Continuous
LED, R Red
LED, A Orange
LED, G Green
LED, B Blue
LED, C White
Yellow wire
Low-priced, high quality LED Signal Tower
featuring low maintenance and energy savings.
Reflection
system
High visibility
from any angle
Adjustable volume
Max. 85dB/m
· PATLITE’s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and
distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive
illumination while saving energy (Patent Pending).
· Built-in Alarms (FB Type): 2 selectable sound patterns with adjustable volume up to 85dB at
1m.
· Installation: Direct or pole mount.
· Color-coordinated Wiring: Corresponds to the lens colors for quick wiring verification.
· Interchangeable LED Modules: No re-wiring even after installation.
· Main Body: ABS resin with superior resistance to impact and heat (U type has silver color
and 3m cabtire cable).
· Lens: Superior impact resistant and light translucent AS resin.
· NPN/PNP Compatible: For 24V DC type; M2 type compatible with NPN only.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
· High visibility from any angle.
· Adjustable volume Max. 85dB at 1m
Fuse
Gray wire
Black wire
1A
Fuse
Ground wire Green and Yellow striped
1A
AC 90~250V
Flashing
LED, R Red
LED, A Orange
LED, G Green
LED, B Blue
LED, C White
Alarm 1 Purple
Alarm 2 Skyblue
Continuous
& alarm
Fuse
Power
supply
1A
Interchangeable LED modules
· Changeable color sequence: Easy to add /
remove up to 5 colored modules even after
installation.
· Note: LED modules of the same color will
light up simultaneously.
2 Lights
3 Lights
If the number of LED
module is changed, center
shaft must be purchased.
4 Lights
5 Lights
Dual reflection system
The wiring remains the same
Each color of LED module corresponds to
the lead wire color.
Lead wire color correspondence table
Color of LED Unit
Red
Amber
Green
Blue
Clear/White
Color of Lead Wire
Red
Orange
Green
Blue
White
Alarm
Color of Lead Wire
Alarm1
Purple
Alarm2
Skyblue
Fuse for outer contact protection
Gray wire
Black wire
Ground wire
Green and Yellow striped
Fuse
Power
supply
Voltage
All voltage types
Fuse
1A
1A
LCE / LCE-U type
Number of stacks
Voltage
Type
Continuous
& alarm
Continuous COM Yellow
Flashing COM Brown
Flashing COM Brown
Gray wire
Yellow wire
Flashing
LED, R Red
LED, A Orange
LED, G Green
LED, B Blue
LED, C White
Alarm 1 Purple
Alarm 2 Skyblue
How to order (LCE type)
Model
Rated Voltage
LCE-102(U)
24V AC/DC
1.7W
LCE-1M2
90~250V AC
1.9W
LCE-202(U)
24V AC/DC
2.4W
Power Consumption
1 Light
Easy to add
and remove
Power
supply
Continuous and Flashing with Alarm
AC/DC 24V
Alarm
LED
Signal Line Signal Line Current Signal Line Inrush
Voltage
R,Y
G,B,C
Current Current
25mA
40mA 250mA
LCE/LCE-U 24V AC/DC 24V AC/DC 30mA
30mA
25mA
40mA 250mA
LCE-M2 90~250V AC 24V DC
Model
Continuous COM Yellow
Power
supply
Signal line voltage and current per LED module
LCE-2M2
90~250V AC
2.6W
LCE-302(U)
24V AC/DC
3.0W
LCE-3M2
90~250V AC
3.2W
LCE-402(U)
24V AC/DC
3.6W
LCE-4M2
90~250V AC
3.8W
LCE-502(U)
24V AC/DC
4.2W
LCE-5M2
90~250V AC
4.4W
FB type:approx. 60 flashes per minute.
LCE-502UFBW-RYGBC-Z
Stacks
1~5
Rated Voltage
02: 24V AC/DC
M2: 90~250V AC
Body Color
Blank: Ivory white
U: Silver Color
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
Color of LED
R: Red
Color of Lens
Y: Amber
Blank: Colored lens
G: Green
Z: Clear lens
B: Blue
C: Clear/White
Top to bottom
Mount
Blank: Pole Mount (with SZ-012)
K: Pole Mount (with SZ-021)
W: Direct Mount
PATLITE’s original dual reflection system with its
exclusive hybrid prism-cut lens and 5 color LED
modules create bright, distinctive, even
illumination.
22
Easy to add or remove
Interchangeable LED modules
If the number of LED
module is changed, center
shaft must be purchased.
· Changeable color sequence: Easy to add/ remove
up to 5 colored modules even after installation.
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
Signal Tower
The wiringremains the same.
Ivory White Body
LCS Type
Each color of LED module corresponds to the
lead wire color.
Dimensions
LCS type
LCS-K type
Versatile LED Signal Tower featuring high quality
and low price.
18
47.5
68
ON
55
Approx. 1150 from wire exit
Side-Mount Bracket
32
30
44.5
3
57
27
Pole Hole ø17.3
2- ø9
(mm)
Wiring Diagram
Available by Special Order
· Silver Color Body Type (LCS-U).
· Cabtire Cable: Versatile and flexible 3m cable.
· Clear Lens Module: Distinctive color recognition when operated (B0438 type).
· UL type (E215660).
Note: See page 123 for wiring diagram
LCS type
How to order(LCS type)
Number of stacks
Model
Rated Voltage
Power Consumption
1 Light
LCS-102
24V AC/DC
2 Lights
LCS-202
Mass
LCS
LCS-K
0.7W
0.42kg
0.54kg
24V AC/DC
1.4W
0.45kg
0.57kg
0.60kg
3 Lights
LCS-302
24V AC/DC
2.0W
0.48kg
4 Lights
LCS-402
24V AC/DC
2.6W
0.51kg
5 Lights
LCS-502
24V AC/DC
3.2W
0.54kg
LCS-502K- RYGBC-Z
Stacks
1~5
Rated Voltage
02: 24V AC/DC
23
LCS-K type
Mounting Bracket
SZ-021
Please add –Z at the end of
the part number when
ordering the clear lens type
tower.
20
· PATLITE’s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive
illumination while saving energy (Patent Pending).
· Installation: Pole mount only.
· Color coordinated Wiring: Corresponds to the lens colors for quick wiring verification.
· Interchangeable LED Modules: No re-wiring even after installation.
· Main Body: ABS resin with superior resistance to impact and heat.
· Lens: Superior impact resistant and light translucent AS resin.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
OFF
ø17.3
57
82
ø17.3
(240.5)
(257)
11
18
Height (mm)
1 Light: 61
2 Lights: 96
3 Lights: 131
4 Lights: 166
5 Lights: 201
NPN/PNP
Open collector
High visibility
from any angle
LCS type
Mounting Bracket
SZ-012
Height
Height
35
35
LED
ø40
IP54
Reflection
system
Clear lens style tower is also available.
ø40
12
ø40
12
Silver Color Body
LCS-U Type
11
LCS / LCS-U
LCS / LCS-U
Color of LED
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Color of Lens
Blank: Colored lens
Z: Clear lens
Mount
Blank: Pole Mount (with SZ-012)
K: Pole Mount (with SZ-021)
24
30
3
27
57
20
Vinyl tube
Vinyl tube
0°
254
Mounting Dimension
30
ø8
Wire exit
32
Pole hole ø17.3
27
57
(mm)
LED
85dB at 1m
30
44.5
Wire entry hole ø13
Name plate
M17×P1.5
Side-Mount Bracket
ø30
10
12
Max. panel thicknes 5
3-M3
12.5
33
Baffle
Mounting screw (M4)
Max. panel thickness 8
Mounting hole 3- ø4
ø17.3
Height
Max. panel thickness 10
ø17.3
M17×P1.5
Mounting Dimension
Audible alarm
LES-A
Height (mm)
1 Light: 72.2
2 Lights: 102.4
3 Lights: 132.6
4 Lights: 162.8
5 Lights: 193.0
2- ø9
Height
Height (mm)
1 Light: 135.0
2 Lights: 165.2
3 Lights: 195.4
4 Lights: 225.6
5 Lights: 255.8
Height
Height (mm)
1 Light: 72.2
2 Lights: 102.4
3 Lights: 132.6
4 Lights: 162.8
5 Lights: 193.0
44.5
Height
32
Pole hole ø17.3
12/24V AC/DC type
ø50
LES-AW type
ø50
(287)
Height (mm)
1 Light: 204.8
2 Lights: 235.0
3 Lights: 265.2
4 Lights: 295.4
5 Lights: 325.6
Signal Tower
LES-A type
Side-Mount Bracket
ø50
2- ø5
(M4 Through hole)
3
ø50
LE / LES
LE-FB type
100/220V AC type
20
LE type
0°
12
LE / LES
LE / LES
Dimensions
LE
Name plate
2- ø9
(mm)
(LE-FB type)
Standard
Mounting Bracket
SZ-012
ø50
Wiring Diagram
IP54
For continuous light
5
4
3
2
1
NPN/PNP
Open collector
LED, R Red
5
4
3
2
1
LED, A Orange
LED, G Green
Versatile, cost and energy efficient LED Signal
Tower for every need.
LED, C White
Yellow
Gray
Black
High visibility
from any direction
· PATLITE’s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive
illumination while saving energy (Patent Pending).
· Built-in Alarms (FB Type): 2 selectable sound patterns with adjustable volume up to 85dB at 1m.
· Installation: Direct or pole mount
· Color-coordinated Wiring: Corresponds to the lens colors for quick wiring verification.
· Interchangeable LED Modules: No re-wiring even after installation. The LED module of LES-A
cannot be added, removed or interchanged.
· Main Body: ABS resin with superior resistance to impact and heat.
· Lens: Superior impact resistant and light translucent AS resin.
· NPN/PNP Compatible: Except LE 100/220V AC, compatible with NPN only.
· Available Colors: Red, Amber, Green, Blue, Clear.
LED, R Red
LED, A Orange
LED, A Orange
Continuous
·
Alarm
LED, G Green
LED, B Blue
LED, C White
Alarm1 Purple
Interchangeable LED modules
· Changeable color sequence: Easy to add /
remove up to 5 colored modules even after
installation.
· Note: LED modules of the same color will
light up simultaneously.
Each color of LED module corresponds to
the lead wire color.
25
LED, C White
Alarm1 Purple
PATLITE’s original double reflection system with
its exclusive hybrid prism-cut lens and 5 color LED
modules create distinctive illumination that is
bright and even (Patent Pending).
Alarm
Signal Line Current
40mA
Inrush Current 150mA
Alarm
Color of Lead wire
Alarm1
Purple
Alarm2
Skyblue
*Alarm wires do not exist for continuous only models.
Flashing
Alarm2 Skyblue
Flashing COM Brown
Gray
Fuse 1A
Black (Yellow)
Power
supply
Flashing COM Brown
Continuous COM Yellow
Gray
Black
Power
supply
Fuse 1A
LE type
Fuse for customer-supplied contact protection
Voltage
Fuse
All voltage types
1A
How to order
Number of stacks
2 Lights
Model
Rated Voltage
Power Consumption
LE-101
12V AC/DC
1.1W
LE-102
24V AC/DC
1.6W
LE-110
100V AC
LE-120
220V AC
LE-502FBW-RYGBC
5.7W
LE-201
12V AC/DC
1.7W
LE-202
24V AC/DC
2.2W
LE-210
5 Lights
Dual reflection system
LED
Signal Line Current
R, A: 50mA G, C: 40mA B: 44mA
R, A: 25mA G, C: 20mA B: 22mA
R, A: 25mA G, C: 20mA B: 22mA
Color Designator Chart *
Color of LED unit
Color of Lead wire
Red
Red
Amber
Orange
Green
Green
Blue
Blue
Clear/White
White
100V AC
6.7W
LE-220
220V AC
LE-301
12V AC/DC
2.2W
LE-302
24V AC/DC
2.7W
LE-310
100V AC
7.5W
LE-320
220V AC
LE-401
12V AC/DC
2.7W
LE-402
24V AC/DC
3.2W
LE-410
100V AC
8.3W
LE-420
220V AC
LE-501
12V AC/DC
3.2W
LE-502
24V AC/DC
3.7W
LE-510
100V AC
LE-520
220V AC
Stacks
1~5
Rated Voltage
01: 12V AC/DC
02: 24V AC/DC
10: 100V AC
20: 220V AC
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Mount
P: Pole Mount (with SZ-012)
W: Direct Mount
9.1W
LES-502AW-RYGBC
FB type:approx. 60 flashes per minute.
· Note: The LED module of LES-A
cannot be added, removed
or interchanged.
The wiring remains the same
LED, B Blue
4 Lights
If the number of LED
module is changed, center
shaft must be purchased.
Continuous
·
Alarm
LED, G Green
5
4
3
2
1
12V AC/DC
24V AC/DC
24V DC
*LE type: All 5 light wires are supplied even if all colors are not used.
Flashing
Alarm2 Skyblue
3 Lights
Easy to add
and remove
Power
supply
Fuse 1A
LE-FB 100/220V AC
LED, R Red
1 Light
Available by Special Order
· LES 24V: IP65 for direct mount and IP54 for pole mount types.
· UL type (E215660).
Power
supply
Model Rated Voltage Signal Line Voltage
LE
12V AC/DC
LES/LE 24V AC/DC
LE
100V,220V AC
LED, G Green
LED, C White
Fuse 1A
For continuous light
LED, A Orange
LED, B Blue
LE-FB 12/24V AC/DC
5
4
3
2
1
LED, R Red
LED, B Blue
Black(Yellow)
Signal line voltage and current per LED module
LE 100/220V AC
LE 12/24V AC/DC (LES: 24V type only)
(Pole-mount type IP23)
Reflection
system
Optional
Mounting Bracket
SZ-014
Optional
Mounting Bracket
SZ-011
Optional
Mounting Bracket
SZ-021
LES type
Stacks
1~5
Number of stacks
Model
Rated Voltage
Power Consumption
1 Light
LES-102A
24V AC/DC
0.6W
2 Lights
LES-202A
24V AC/DC
1.2W
3 Lights
LES-302A
24V AC/DC
1.7W
4 Lights
LES-402A
24V AC/DC
2.2W
5 Lights
LES-502A
24V AC/DC
2.7W
Rated Voltage
02: 24V AC/DC
Mount
Blank: Pole Mount (with SZ-012)
W: Direct Mount
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
26
15
LU5
Signal Tower
Wiring Diagram
LU5 type
Height (mm)
1 Light: 211
2 Lights: 252
3 Lights: 293
4 Lights: 334
5 Lights: 375
LU5-02FB
24V DC
41
LED Module
LU5
Dimensions
113
No.4
Blue
For continuous
light and buzzer
LED unit Blue
30
No.5 White LED unit Clear/White
No.6
Gray
Alarm 1
No.7 Black Alarm 2
120
3-M3
(FB type)
LED unit Red
No.3 Green LED unit Green
Mounting hole
No.8 Yellow COM
No.9
12.5
42.6
LED
85dB at 1m
Electronic
Sound 2
Red
No.2 Orange LED unit Amber
Front (Buzzer)
3- 4
Terminal block
Base Module
Height
No.1
Mounting Dimension
Wire entry
13
Name plate
Mounting hole template
Max. panel thickness 10
Gray
Flashing COM
No.10 Black Power supply for flashing
For flashing
<Recommended electric wire>
Solid wire :
0.8- 1.2mm
Stranded wire :
0.3-1.25mm2 (AWG 22-18)
(mm)
Fuse 1A
Power
supply
(FB type)
Optional parts
ø50
Mounting Bracket
Upper Bracket
IP65
SZ-60-U
Steel Pole
SZ-010
SZ-016A
(For ø21.7mm pole)
(For ø21.7mm pole)
Aluminum Pole
ø73
· PATLITE’s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· Built-in Alarms (FB Type): 2 selectable sound patterns up to 85dB at 1m.
· Installation: Direct or pole* mount.
· Color-coordinated Wiring: Terminal block color corresponds to the lens colors for quick wiring verification.
· Interchangeable LED Modules: No re-wiring even after installation.
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
12
LU5-02FB
LED unit
LED module
27
Module
Color
Model
RED
AMBER
GREEN
BLUE
CLEAR
LU5-E-R
LU5-E-Y
LU5-E-G
LU5-E-B
LU5-E-C
Rated
voltage
Operating
voltage
Type
Blank: Continuous light
FB: Continuous or , flashing
light with audible alarm
Operating
temperature
range
Mass
-30˚C~+60˚C
44g ±10%
52mA/1.25W
Rated voltage
± 10%
24V DC
(21.6~26.4V)
42mA/1.0W
Model
Options
LU5-02
Continuous only
LU5-02FB 2 sounds / Flash
Rated
Voltage
24V DC
45
800mm
21.7mm
21.7mm
21.7mm
800mm : POLE-800S21
800mm : POLE-800A21
300mm : POLE-300S21
300mm : POLE-300A21
100mm : POLE-100S21
100mm : POLE-100A21
Material
POLE-
S21
Steel
POLE-
A21
Aluminum
SZ-010
ADC12
SZ-016A
ADC12
SZ-70-B
ABS resin
SZ-020
ABS resin
57
Base module
Current/Power
21.7mm
Mounting Dimensions
82
68
* Optional part sold separately.
21.7mm pole
72
Color
R: Red
Y: Amber Rated Voltage
G: Green
02: 24V DC
B: Blue
C: Clear/White
Model
SZ-020
For
21.7mm
Modules
Wall Mount Bracket
Base module
LU5-E-R
65
ø68
ø100±0.5
47.5
LED module
ø54
21.7mm
Pole bottom line
How to order
Available By Special Order
· RoHS Compliance.
· Silver Color Body.
· Modules of the same color can be modified to
operate from different terminals.
Mounting hole
4- ø5
100mm
Mounting hole
4-5.2×7
300mm
Versatile modular Signal Tower featuring easy assembly
and wiring designed for every need.
300mm
Required for
pole mounting
100mm
800mm
NPN/PNP
Open collector
ADC12
Aluminum alloy die-cast
55
Operating
voltage
Operating
temperature
range
Mass
Open
Collector
Rated voltage
182g ±10%
PNP/NPN
± 10%
-30˚C~+60˚C
200g ±10%
(21.6~26.4V)
FB type: approx. 60±12 flashes per minute
28
Pole mount
Direct mount (W type)
ø57
(FB type)
Wire exit ø15
16
LED
85dB at 1m
Electronic
Sound 2
Mounting Dimension
Height
SE(W), SEF(W) type
Height (mm)
1Light: 175.1
2Lights: 242.2
3Lights: 309.3
4Lights: 376.4
5Lights: 443.5
ø57
Height
Signal Tower
SEB(W), SEFB(W) type
Height (mm)
1Light: 247.7
2Lights: 314.8
3Lights: 381.9
4Lights: 449.0
5Lights: 516.1
SE-D
SE-D
Max. panel
thickness: 10mm
Max. panel
thickness: 5mm
(274)
SE-D
Dimensions
Mounting hole
2-ø5
2-M4
42
(FB type)
ø57
IP54(
Wiring Diagram
FB type: IP23
Pole mount: IP23
)
Note: See page 127 for wiring diagram
NPN/PNP
Open collector
Signal Tower featuring enhanced visibility
with original reflection system.
· PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· Original LED reflection system: Improves brightness and provides maintenance free operation.
· FB type: 2 tone built-in buzzer with volume control (85dB at 1m).
· Installation: Direct or pole mount.
· Color-coordinated wiring: Corresponds to the lens color for quick wiring verification.
· Interchangeable LED module: No re-wiring even after installation.
· Lens: Weather resistant and light translucent AS resin.
· NPN/PNP compatible: Except 100/220V AC, compatible with NPN only.
· CE Compliance: 24V AC/DC type ONLY.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Available by Special Order
· UL type (E215660).
· RoHS compliance.
SE-D type
Number of stacks
1 Light
2 Lights
3 Lights
4 Lights
5 Lights
29
How to order
Rated Voltage
Power Consumption
SE-102D
Model
24V AC/DC
1.5W
SE-110D
100V AC
3.0W
SE-120D
220V AC
3.5W
SE-202D
24V AC/DC
2.5W
SE-210D
100V AC
5.0W
SE-220D
220V AC
5.5W
SE-302D
24V AC/DC
3.5W
SE-310D
100V AC
6.5W
SE-320D
220V AC
7.0W
SE-402D
24V AC/DC
4.5W
SE-410D
100V AC
7.5W
SE-420D
220V AC
8.5W
SE-502D
24V AC/DC
5.5W
SE-510D
100V AC
8.5W
SE-520D
220V AC
10.0W
SEFBW-102D-R
Blank: Continuous light
FB: Continuous or flashing
light with audible alarm
Blank: Pole mount
(with SZ-013)
W: Direct mount
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Stacks
1~5
Rated Voltage
02: 24V AC/DC
10: 100V AC
20: 220V AC
30
57
Height (mm)
1Light: 160
2Lights: 226
3Lights: 292
4Lights: 358
Signal Tower
STD type
Circular mounting
bracket
Mounting Dimension
Front
0°
Mounting hole 3- ø5
6~17
0°
12
12
304
21.7
STD
STD
Height
STD
Dimensions
ø40
Name plate
Wire exit ø12
Optional
Mounting Bracket
SZ-020
27
12
(mm)
60
Wiring Diagram
Bulb
LED
STD-F
24V type
STD (Continuous lighting type)
4
3
(optional)
2
1
ø57
IP20
STD-F
100V/120V/200~240V type
For continuous
light
4 (Red wire)
3 (Orange wire)
2 (Green wire)
1 (Blue wire)
4
3
4
3
2
For flashing
Power
) supply
1
Common wire for flashing
(Brown wire)
Fuse
Vibration-absorption technology to extend bulb life.
3A
1A
Number of stacks
1 Light
2 Lights
3 Lights
Optional Parts
LED Illuminant Bulb
4 Lights
Even optical diffusion with the
combination
of
PATLITE's
hybrid prism-cut lens and LED
radial layout.
LED illuminant bulb will eliminate bulb failure.
24V AC/DC
100~240V AC
Power source wire (Gray wire)
Power source wire (Black wire)
Common wire for continuous lighting
(Yellow wire)
Power source wire (Gray wire)
Power source wire (Black wire)
) Power
supply
) Power
supply
Fuse 10A
Fuse 1A
STD type
· Extended Bulb Life: Shock resistance bulb and vibration-absorption mechanism provides long bulb life even
under severe vibration.
· Installation: Pole mount.
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
· CE Compliance: For 24V AC/DC type ONLY.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
DE
Amperage rating
For flashing
Common wire for flashing
(Brown wire)
Amperage rating for the fuse
Voltage Type
4 (Red wire)
3 (Orange wire)
2 (Green wire)
1 (Blue wire)
2
1
Common wire
(Yellow wire)
For continuous
light
For continuous
light
4 (Red wire)
3 (Orange wire)
2 (Green wire)
1 (Blue wire)
How to order
Model
Rated Voltage
Bulb
STD-102
24V AC/DC
30V 10W
STD-110
100V AC
110V 15W
STD-112
120V AC
140V 10W
STD-123
220V AC
240V 15W
STD-202
24V AC/DC
30V 10W
STD-210
100V AC
110V 15W
STD-212
120V AC
140V 10W
STD-223
220V AC
240V 15W
STD-302
24V AC/DC
30V 10W
STD-310
100V AC
110V 15W
STD-312
120V AC
140V 10W
STD-323
220V AC
240V 15W
STD-402
24V AC/DC
30V 10W
STD-410
100V AC
110V 15W
STD-412
120V AC
140V 10W
STD-423
220V AC
240V 15W
STD-302F-RYG
Stack
1~4
Rated Voltage
02: 24V AC/DC
10: 100V AC
12: 120V AC
23: 220V AC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Type
Blank: Continuous light
F: Continuous light or
flashing light
Bulb:30V/110V/140V/240V: T20 E12
Visible from Top
E12 Base
Light diffusion
through hybrid
prism-cut lens.
· Enhanced Visibility: PATLITE's exclusive hybrid
prism-cut lens with super bright LEDs
· Energy Efficient: Power-saving and long life LED.
· Installation: Same as bulb type.
· AC/DC compatible.
· Available Colors: Red, Amber, Green, Blue,
Clear/White.
Dimension
Without vibration-proof
Red
MODEL
ø27
43.7
DE-24E
Base
E12
Amber
BASE
Green
STD type
Blue Clear/White
RATED WATTAGE
VOLTAGE
E12
24V AC/DC
Edison Base
0.7W
Only 24V model is applicable on all series.
Vibration-absorption mechanism extends bulb life.
The unique vibration absorbing structure using new material reduces vibration
and impact from all machines and devices, greatly extending bulb life (PAT.)
The rubber vibration
isolator absorbs
vibration.
mm
31
32
Silver Color Body
LME-U Type
· Changeable color sequence: Easy to add /
remove up to 5 colored modules even after
installation.
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
If the number of LED
module is changed, center
shaft must be purchased.
Dual reflection system
LED
Cabtire
90dB at 1m
Electronic
Sound 2
Ivory White Body
LME Type
PATLITE’s original dual reflection system with its
exclusive hybrid prism-cut lens and 5 color LED
modules create bright, distinctive, even
illumination.
The wiring remains the same
Each color of LED module corresponds to
the lead wire color.
(LME-U)
Dimensions
LME-L type
LME type
ø60
(FB type)
LME-W type
100/220V AC type
ø60
12
(FB type)
Height (mm)
1 Light: 206.0
2 Lights: 247.2
3 Lights: 288.4
4 Lights: 329.6
5 Lights: 370.8
standard
Circular mounting
bracket
(FB,L,K type: IP54)
ø21.7
24V AC/DC type
Height
(260.5)
Height
27
12
ø60
IP65
Height (mm)
1 Light: 150.0
2 Lights: 191.2
3 Lights: 232.4
4 Lights: 273.6
5 Lights: 314.8
Baffle
12
NPN/PNP
Open collector
LME-UL/LME-UFBL
LME-L/LME-FBL type
type
Mounting Bracket
SZ-013
1200±50*
27
Max. thickness 5
24V AC/DC: 1400*
100/220V AC: 1300*
3-M4
*LME-U: 3000
300
M4 × 12
81
12
ø22
1100*
4.5
2- ø11
81
31
5
66
32
60
35
ø21.7
Versatile, cost and energy efficient LED Signal
Tower for every need.
LME / LME-U
Signal Tower
Easy to add
and remove
Interchangeable LED modules
41.2
LME / LME-U
LME / LME-U
Optional
Mounting Bracket
SZ-028
20
(mm)
Reflection
system
High visibility
from any direction
Adjustable volume
Max. 90dB at 1m
· PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and
distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive
illumination while saving energy (Patent Pending).
· FB type: 2 selectable built-in alarms with adjustable volume up to 90dB at 1m.
· Installation: Direct or pole mount.
· Interchangeable LED module: No re-wiring even after installation.
· Main Body: Superior impact and heat resistant ABS resin.
· Lens: Superior weather resistant and light translucent AS resin.
· NPN/PNP Compatible: Except 100/220V AC LME-U type, compatible with NPN only.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
LME-U type
· Available 24V AC/DC only.
· Silver Color Body.
· Cabtire Cable: Versatile and flexible 3m cable.
· Pole-mount with circular mounting base or wall mount bracket as an optional accessory.
Wiring Diagram
Note: See page 125 for wiring diagram
LME type
Number of
stacks
1 Light
3 Lights
4 Lights
5 Lights
Mass
Model
Rated Voltage
Power
Consumption
LME
LME-L
LME-W
LME-102
24V AC/DC
2.2W
0.42kg
0.77kg
0.28kg
LME-110
100V AC
LME-120
220V AC
LME-202
24V AC/DC
LME-210
100V AC
LME-220
220V AC
LME-302
24V AC/DC
LME-310
100V AC
1.01kg
5.1W
2 Lights
Available by Special Order
· UL type (E215660)
How to order
LME-320
220V AC
LME-402
24V AC/DC
LME-410
100V AC
LME-420
220V AC
LME-502
24V AC/DC
LME-510
100V AC
LME-520
220V AC
0.52kg
0.66kg
—
3.4W
0.48kg
7.1W
0.72kg
3.8W
0.54kg
7.9W
0.78kg
0.82kg
0.34kg
1.06kg
0.58kg
—
0.87kg
0.40kg
1.11kg
0.64kg
—
4.2W
0.60kg
—
0.46kg
8.7W
0.84kg
—
0.70kg
4.6W
0.66kg
—
0.52kg
9.5W
0.90kg
—
0.76kg
FB type:approx. 60 flashes per minute.
33
LME-502UFBW-RYGBC-Z
Stack
1~5
Rated Voltage
02: 24V AC/DC
10: 100V AC
20: 220V AC
Body Color
Blank: lvory white
U: Silver color
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
Color of LED
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Color of Lens
Blank: Colored lens
Z: Clear lens
Mount
Blank: Pole Mount (with circular mounting bracket)
K: Pole Mount (with SZ-020)
L: Pole Mount (with SZ-013)
W: Direct Mount
34
Signal Tower
LED
Cabtire
90dB at 1m
Electronic
Sound 2
S1: Red, Amber, Green
Q1: Red, Amber, Green, Blue
S4: Red, Green, Blue
Q2: Red, Amber, Green, Clear/White
Clear lens
S7: Amber, Green, Blue
Patlite's new single-tier, multi-color unit is
ideally suited for installations requiring a
multiple color display but have limited
vertical space. Clear lenses distinguish
between lit and unlit lamps, and the unlit set
integrates visually with the equipment to
which it is attached.
Q4: Amber, Green, Blue, Clear/White
(FB type)
Dimensions
(FB type)
LME type
12
1
Mounting hole
3- ø5
0°
Max. panel
thickness 5
°
20
ø40
3-M4
Wire exit
ø12
1400
Name plate
12
Versatile, cost and energy efficient LED Signal
Tower for every need.
1000
Reflection
system
High visibility
from any angle
Adjustable volume
Max. 90dB at 1m
· PATLITE's Exclusive Hybrid Prism-Cut Lens: For enhanced visibility from any direction and distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive illumination
while saving energy (Patent Pending).
· FB type: 2 selectable built-in alarms with adjustable volume up to 90dB at 1m.
· Installation: Direct or pole mount.
· Interchangeable Modules: No re-wiring even after installation.
· Patlite's new single tier, triple or quadruple color unit: For multi color display applications with limited
vertical space.
· Pole-mount type: Includes circular mounting base as standard equipment.
· Available Colors: Refer to color combination table (p. 36).
Available by Special Order
· PNP compatible.
· Silver color body.
· UL compliance.
(mm)
Optional
Mounting Bracket
SZ-013
Wiring Diagram
Note: See page 125 for wiring diagram
LME-S / LME-Q type
Optional
Mounting Bracket
SZ-028
How to order
LME-S type
1 Light
Mass
Model
Rated Voltage
Power
Consumption
LME
LME-W
LME-102S
24V DC
2.2W
0.42kg
0.28kg
LME-110S
100V AC
5.1W
0.66kg
0.52kg
Number of
stacks
LME-120S
LME-Q type
Number of
stacks
1 Light
Mass
Model
Rated Voltage
Power
Consumption
LME
LME-W
LME-102Q
24V DC
2.2W
0.42kg
0.28kg
LME-110Q
100V AC
5.1W
0.66kg
0.52kg
LME-120Q
220V AC
FB type: approx. 60 flashes per minute.
Dual reflection system
PATLITE’s original dual reflection system with its
exclusive hybrid prism-cut lens and 5 color LED
modules create bright, distinctive, even
illumination.
LME-102UFBW-S1
220V AC
FB type:approx. 60 flashes per minute.
35
Optional
Mounting Bracket
SZ-020
300
ø21.7
Standard
Circular mounting
bracket
12
NPN
Open collector
Baffle
Mounting Dimension
(LME-W)
6~17
IP65
ø60
206.0
(24V DC type: 150.0)
41.2
ø60
12
ø60
LME-W type
LME-S / LME-Q
Patlite's new single tier,
triple color or quadruple color unit
206.0
27 (24V DC type: 150.0)
LME-S / LME-Q
LME-S / LME-Q
Rated Voltage
02: 24V DC
10: 100V AC
20: 220V AC
Body color
Blank: Ivory white
U: Silver color
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
Color
S1: Red, Amber, Green
S4: Red, Green, Blue
S7: Amber, Green, Blue
Q1: Red, Amber, Green, Blue
Q2: Red, Amber, Green, Clear/White
Q4: Amber, Green, Blue, Clear/White
Mount
Blank: Pole Mount (with circular mounting bracket)
W: Direct Mount
36
5
32
60
ø21.7
20
Standard
Mounting Bracket
M22×P1.5
M4×12
4.5
35
2-ø11
25
11
(10)
66
(0~16)
81
Height
Ivory White Body
LMS Type
81
ø22
LMS type
Height (mm)
1 Light: 69.2
2 Lights: 110.4
3 Lights: 151.6
4 Lights: 192.8
5 Lights: 234.0
31
Signal Tower
LMS-L
ø60
Silver Color Body
LMS-U Type
6~17
12
ø60
1
ø40
Wire exit
ø12
Name plate
LMS-L type
Mounting Bracket
SZ-013
LMS-K
All clear lens type is also available.
Mounting Dimension
(LMS-K)
47.5
35
68
82
(226)
72
ø21.7
57
· PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive
illumination while saving energy (Patent Pending).
· Installation: Pole mount.
· Interchangeable Modules: No re-wiring even after installation.
· Main Body: Superior impact and heat resistant ABS resin.
· Lens: Superior weather resistant and light translucent AS resin.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Available by Special Order
· Silver Color Type (LMS-U).
· Cabtire Cable: Versatile and flexible 3m cable.
· UL type (E215660).
· Changeable color sequence: Easy to add/ remove
up to 5 colored modules even after installation.
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
The wiring remains the same.
Easy to add or remove
If the number of LED
module is changed, center
shaft must be purchased.
OFF
ON
Please add - Z after the part
number when you place the
order for all clear lens type.
(mm)
55
Wiring Diagram
Note: See page 125 for wiring diagram
LMS type
Number of stacks
Interchangeable LED modules
5
4- ø
ø30
Versatile, cost and energy efficient LED Signal
Tower for every need.
High visibility
from any direction
Mounting hole
3- ø5
1200±50
NPN/PNP
Open collector
Reflection
system
°
20
0°
LED
ø60
IP65
LMS-K type
Mounting Bracket
SZ-020
Mounting Dimension
(LMS)
(293)
ø21.7
LMS / LMS-U
LMS
(250)
LMS / LMS-U
12
LMS / LMS-U
Dimensions
Model
Rated Voltage
How to order
Power
Consumption
Mass
LMS
LMS-L
LMS-K
1 Light
LMS-102
24V AC/DC
1.2W
0.29kg
0.62kg
0.42kg
2 Lights
LMS-202
24V AC/DC
2.4W
0.34kg
0.67kg
0.47kg
3 Lights
LMS-302
24V AC/DC
2.8W
0.39kg
0.72kg
0.52kg
4 Lights
LMS-402
24V AC/DC
3.2W
0.44kg
0.72kg
0.57kg
5 Lights
LMS-502
24V AC/DC
3.6W
0.49kg
0.82kg
0.62kg
LMS-502UL-RYGBC-Z
Stack
1~5
Rated Voltage
02: 24V AC/DC
Body Color
Blank: Ivory white
U: Silver color
Color of LED
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Color of Lens
Blank: Colored lens
Z: Clear lens
Mount
Blank: Pole Mount (with circular mounting bracket)
K: Pole Mount (with SZ-020)
L: Pole Mount (with SZ-013)
Each color of LED module corresponds to the
lead wire color.
37
38
Optional parts
LHE
LHE
ø70
Signal Tower
Height
LHE
Dimensions
Mounting Dimension
Wire exit ø14
LHE type
Mounting hole
3- ø5
ø40
Optional
Mounting Pole
SZ-50L
0°
12
12
0°
LED
90dB at 1m
Electronic
Sound 2
Height (mm)
1 Light: 212
2 Lights: 253
3 Lights: 294
4 Lights: 335
5 Lights: 376
Optional
Mounting Pole
SZ-50T
Optional
Wall mount Bracket
SZ-018
Name plate
3-M4
Max. panel thickness 10
(FB type)
Buzzer
(mm)
(FB type)
ø70
IP65
''Super Bright'' LED
provides highest
level of visibility.
(FB type IP54)
RED
AMBER
GREEN
CLEAR/WHITE
BLUE
NPN/PNP
Open collector
Wiring Diagram
Signal Tower with waterproof design
for wet environments.
Reflection
system
Adjustable volume
Max. 90dB at 1m
· Original LED reflection system: Improves brightness and provides maintenance free
operation.
· FB type: 2 built-in alarms with adjustable volume up to 90dB at 1m.
· Installation: Direct mount; pole mount is available with optional mounting pole.
· Interchangeable Modules: No re-wiring even after installation.
· Lens: Superior impact and heat resistant AS resin for superior durability and light
transmission.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Note: See page 124 for wiring diagram
LHE type
Available by Special Order
· UL type (E215660).
Number of stacks
1 Light
2 Lights
Interchangeable LED modules
· Changeable color sequence: Easy to add /
remove up to 5 colored modules even after
installation.
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
Easy to add
and remove
3 Lights
4 Lights
If the number of LED
module is changed, center
shaft must be purchased.
5 Lights
Dual reflection system
The wiring remains the same
Each color of LED module corresponds to
the lead wire color.
39
How to order
Model
Rated Voltage
LHE-102A/AFB
LHE-110A/AFB
LHE-120A/AFB
LHE-202A/AFB
LHE-210A/AFB
LHE-220A/AFB
LHE-302A/AFB
LHE-310A/AFB
LHE-320A/AFB
LHE-402A/AFB
LHE-410A/AFB
LHE-420A/AFB
LHE-502A/AFB
LHE-510A/AFB
LHE-520A/AFB
24V AC/DC
100V AC
220V AC
24V AC/DC
100V AC
220V AC
24V AC/DC
100V AC
220V AC
24V AC/DC
100V AC
220V AC
24V AC/DC
100V AC
220V AC
Power Consumption
2.2W
4.7W
4.7W
3.4W
6.4W
6.4W
4.4W
7.9W
7.9W
5.4W
9.4W
9.4W
6.4W
10.9W
10.9W
FB type approx. 60 flashes per minute.
LHE-502AFB-RYGBC
Stack
1~5
Rated Voltage
02: 24V AC/DC
10: AC 100V
20: AC 220V
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
PATLITE’s original dual reflection system with its
exclusive hybrid prism-cut lens and 5 color LED
modules create bright, distinctive, even
illumination.
40
No.1
15
ø70
Wiring Diagram
Signal Tower
No.4
No.5 White LED unit Clear/White
No.6
Gray
Alarm 1
No.7 Black Alarm 2
No.8 Yellow COM
41
Height
No.9
Flashing COM
For flashing
<Recommended electric wire>
Solid wire :
0.8- 1.2mm
Stranded wire :
0.3-1.25mm2 (AWG 22-18)
Name plate
Mounting hole
3- ø5
Fuse 1A
0°
ø40
12
42.5
Power
supply
0°
3-M4
Gray
No.10 Black Power supply for flashing
Mounting Dimension
112.5
Terminal block
Base Module
For continuous
light and alarm
LED unit Blue
Blue
12
(FB type)
LED unit Red
No.3 Green LED unit Green
Height (mm)
1 Light: 211
2 Lights: 252
3 Lights: 293
4 Lights: 334
5 Lights: 375
Wire exit ø14
LED
90dB at 1m
Electronic
Sound 2
Red
No.2 Orange LED unit Amber
LU7 type
LU7
LU7
LED Module
LU7
Dimensions
Alarm
Max. panel thickness 10
(mm)
Easy wiring terminal system
(FB type)
ø70
Optional Parts
Mounting Bracket
Upper Bracket
IP65
SZ-50-U
Steel Pole
Aluminum Pole
SZ-50T
SZ-016A
(For
21.7mm pole
ø70
NPN/PNP
Open collector
ø73
12
0°
12
21.7mm
3- ø4.5
2-M4
25
35
ø70
21.7mm
21.7mm
21.7mm
21.7mm
65
300mm
Pole bottom
line
100mm
ø40
100mm
300mm
Mounting hole
120°
323
Required for
pole mounting
Versatile modular Signal Tower featuring easy assembly
and wiring designed for every need.
· PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance.
· FB type: 2 selectable built-in alarms with adjustable volume up to 90dB at 1m.
· Installation: Direct mount (Pole mount with optional parts).
· Color-coordinated Terminal Block: Corresponds to the lens colors for quick wiring verification in the base unit.
· Interchangeable LED module: No re-wiring even after installation.
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
800mm
800mm
Mounting hole
4-5.2×7
ø100±0.5
21.7mm
800mm : POLE-800S21
800mm : POLE-800A21
300mm : POLE-300S21
300mm : POLE-300A21
100mm : POLE-100S21
100mm : POLE-100A21
ø28
(unit: mm)
(unit: mm)
Wall Mount Bracket
SZ-018
Available by Special Order
· RoHS Compliance.
· Silver Color Body.
SZ-50L
SZ-017
SZ-020
(For
(For
21.7mm pole
ø70
21.7mm pole
81
60
5
32
R20
120°
31
81
66
10
59
55
Mounting hole
2- ø11
Mounting hole (? 20)
43
Alarm / Flash
80
93
Rated Voltage
Hexagon nut
60
10
47.5
Model
2-M4
45˚
60
46
57
82
68
Color
Base module
4
Model
?5
LED module
45
87
19.6
40
20
Ground screw
M4×12
?30
72
70
5
12
Mounting Dimensions
35
5
4-?
4.5
Max.mounting hole size
70
282
313
ø22
M22
LU7-E-R
Red
LU7-02
24V DC
-
LU7-E-Y
Amber
LU7-02FB
24V DC
2 sounds / Flash
LU7-E-G
LU7-E-B
LU7-E-C
41
Green
LU7-M2
90~250V AC
-
Blue
LU7-M2FB
90~250V AC
2 sounds / Flash
Clear/White
FB type: approx. 60 flashes per minute.
0
?4 120°
55
Modules
Model
ADC12
POLE-
S21
Steel
POLE-
A21
Aluminum
SZ-016A
ADC12
ADC12…Aluminum alloy die-cast
Model
Material
Model
(unit: mm)
Upper
Bracket
Pole
ADC12
SZ-50T ADC12
Steel
–
–
ADC12
ABS resin
SZ-50L ADC12
Steel
SPHC
EPT
–
SZ-70-B
ABS resin
SZ-017
SZ-020
SPHC…Hot rolled milled (sheet) steel
80
Pre-assembled
Material
Modules
Material
SZ-50-U
3-? 5.5
EPT…Ethylene propylen rubber
L Bracket Bushing
Mounting
Bracket
42
LU7-XE
Sound Module
LED Strobe Module
MP3
80dB at 1m
MP3
ø70
IP65
LU7-XE
LU7-V1
LU7-V1
LED
ø70
IP65
(4 Messages)
NPN/PNP
Open collector
NPN/PNP
Open collector
Stackable sound module with high volume in all directions.
· Volume(1): Adjustable with internal control, high level of 80dB at 1m in all direction.
· Playback System(2): High quality MP3, alarms, melodies or up to 4 messages in 32 seconds.
· Operating Terminal / Playback Sound: Selected by internal jumper placement.
· CE compliant.
· UL approved.
(1) Sound level may vary depending on type of sound.
(2) Sound data is pre-recorded per order at the factory.
LU7-V1
Stackable LED strobe module saves energy
and requires low maintenance.
· Application(1): For use with the LU7 series signal tower.
· Lighting Pattern: Double-flash for a visually stunning display.
· LED: Super bright for enhanced visibility.
· Assembly: Stackable and interchangeable before or after installation.
(1) For use with the LU7-02 and LU7-02FB bases only.
Stackable audible alarm
Comparative Brightness
RED
· Available for all LU7 base styles.
· Easily mounts on top of the light stack.
YELLOW
LU7-E 2000
x5.0
10000
LU7-XE(peak)
LU7-E 1600
x6.3
10000
LU7-XE(peak)
LU7-E
GREEN
3000
x2.4
7300
LU7-XE(peak)
LU7-E
Selectable playback sound
BLUE
· The jumper position determines the sound.
CLEAR
500
LU7-XE(peak) 4000
x8.0
LU7-E 2000
x5.0
LU7-XE(peak)
10000
[mcd]
Dimensions
Dimensions
LU7-V1 type
ø70
Model
24V DC
Power Consumption
3.5W
Mass
ø70
0.17kg
48.9
100.5
LU7-V1
Rated Voltage
LU7-XE type
(mm)
Color
Model
Rated Voltage
Power Consumption
Mass
Red
LU7-XE-R
24V DC
290mA
0.07kg
Amber
LU7-XE-Y
24V DC
290mA
0.07kg
Green
LU7-XE-G
24V DC
140mA
0.07kg
Blue
LU7-XE-B
24V DC
270mA
0.07kg
Clear/White
LU7-XE-C
24V DC
280mA
0.07kg
(mm)
Head cover is supplied with the base unit.
43
44
LU7-XE
Sound Module
LED Strobe Module
MP3
80dB at 1m
MP3
ø70
IP65
LU7-XE
LU7-V1
LU7-V1
LED
ø70
IP65
(4 Messages)
NPN/PNP
Open collector
NPN/PNP
Open collector
Stackable sound module with high volume in all directions.
· Volume(1): Adjustable with internal control, high level of 80dB at 1m in all direction.
· Playback System(2): High quality MP3, alarms, melodies or up to 4 messages in 32 seconds.
· Operating Terminal / Playback Sound: Selected by internal jumper placement.
· CE compliant.
· UL approved.
(1) Sound level may vary depending on type of sound.
(2) Sound data is pre-recorded per order at the factory.
LU7-V1
Stackable LED strobe module saves energy
and requires low maintenance.
· Application(1): For use with the LU7 series signal tower.
· Lighting Pattern: Double-flash for a visually stunning display.
· LED: Super bright for enhanced visibility.
· Assembly: Stackable and interchangeable before or after installation.
(1) For use with the LU7-02 and LU7-02FB bases only.
Stackable audible alarm
Comparative Brightness
RED
· Available for all LU7 base styles.
· Easily mounts on top of the light stack.
YELLOW
LU7-E 2000
x5.0
10000
LU7-XE(peak)
LU7-E 1600
x6.3
10000
LU7-XE(peak)
LU7-E
GREEN
3000
x2.4
7300
LU7-XE(peak)
LU7-E
Selectable playback sound
BLUE
· The jumper position determines the sound.
CLEAR
500
LU7-XE(peak) 4000
x8.0
LU7-E 2000
x5.0
LU7-XE(peak)
10000
[mcd]
Dimensions
Dimensions
LU7-V1 type
ø70
Model
24V DC
Power Consumption
3.5W
Mass
ø70
0.17kg
48.9
100.5
LU7-V1
Rated Voltage
LU7-XE type
(mm)
Color
Model
Rated Voltage
Power Consumption
Mass
Red
LU7-XE-R
24V DC
290mA
0.07kg
Amber
LU7-XE-Y
24V DC
290mA
0.07kg
Green
LU7-XE-G
24V DC
140mA
0.07kg
Blue
LU7-XE-B
24V DC
270mA
0.07kg
Clear/White
LU7-XE-C
24V DC
280mA
0.07kg
(mm)
Head cover is supplied with the base unit.
43
44
Height (mm)
2 Lights: 147
3 Lights: 188
4 Lights: 229
5 Lights: 270
(WME-A)
(WME-AFB)
(WM type: 1 sound)
Wire exit ø16
8.5
(WM)
(WM type: 80dB at 1m)
83.5 (2 Lights)
83.5
80
(WME-A)
Buzzer hole (FB type)
42
LED
Bulb
90dB at 1m
Electronic
Sound 2
W70 D80
IP65
8
21
(WME-A)
166 (4 Lights)
Mounting hole ø5
125 (3 Lights)
41
Signal Tower
207 (5 Lights)
Mounting Dimension
When installing, please keep the buzzer hole faced downward.
(mm)
Wiring Diagram
WME-A
Signal line voltage and current per LED module
Continuous light
24V AC/DC
90~250V AC
LED Red
5
4
3
2
1
WM / WME-A
70
Height
WM / WME-A
WM / WME-A
Dimensions
Continuous
Red
LED Red
5
4
3
2
1
LED Amber Orange
LED Green Green
LED Blue
Blue
LED Clear White
Power
supply
Yellow
Red
LED Amber Orange
WME-A
LED Green Green
LED Blue
Blue
LED Clear White
Yellow
Gray
Black
Fuse 1A
Fuse 1A
Voltage
Type
Signal Line
Voltage
24V AC/DC
24V AC/DC
90~250V AC
24V DC
Model
Continuous
Alarm
LED
Signal Line Current
Signal Line Inrush
R
A
G
B
C
Current Current
35mA
50mA
40mA
250mA
Power
supply
(FB type: IP54)
NPN/PNP
Open collector
Continuous or flashing light with audible alarm
24V AC/DC
90~250V AC
Continuous
LED Red
Continuous
Red
LED Red
Exclusive wall-mount design
saves space and enhances its integral appearance.
· FB type: Built-in audible alarm up to 90dB at 1m (WM-FB type: 80dB at 1m).
· Extended Bulb Life: Shock resistant bulb strong even under severe vibration (WM type).
· Installation: Easy vertical and horizontal installation with mounting bracket.
· Interchangeable Modules: No re-wiring even after installation.
· Mount option: Compatible with household switch box (JISC 8336 with 82.5m pitch).
· Main body: Made of ABS resin (WME-A).
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
· NPN/PNP Compatible: 24V DC type ONLY.
· Available Colors: Red, Amber, Green, Blue, Clear/White.
Available by Special Order
· UL type (E215660).
· WME-A 1stack type.
5
4
3
2
1
LED Clear White
Flashing
Alarm 1
Purple
Alarm 2
Skyblue
LED Green Green
LED Blue
Blue
LED Clear White
Flashing
Alarm 1
Purple
Alarm 2
Skyblue
Flashing COM Brown
Continuous COM Yellow
Gray
Continuous
Gray
Yellow
Fuse 1A
Power
Supply
Black
Fuse 1A
Power
Supply
WM / WME-A type
Number of stacks
2 Lights
4 Lights
If the number of LED module is changed, center
shaft and mounting bracket must be purchased.
Blue
Flashing COM Brown
3 Lights
Interchangeable Modules (WME-A type)
5
4
3
2
1
LED Green Green
LED Blue
Red
LED Amber Orange
LED Amber Orange
5 Lights
Model
Rated Voltage
WM-202
24V AC/DC
WM-210
100V AC
Bulb
28V 11W
No.
39
115~130V AC 140V 13W 49
WM-220
200~240V AC 250V 11W 41
24V AC/DC
WM-310
100V AC
28V 11W
39
115~130V AC 140V 13W 49
WM-320
200~240V AC 250V 11W 41
24V AC/DC
WM-410
100V AC
28V 11W
39
WM-412
115~130V AC 140V 13W 49
200~240V AC 250V 11W 41
24V AC/DC
WM-510
100V AC
2.3W
WME-2M2A
90~250V AC
5.2W
(at 200V)
WME-302A
24V AC/DC
2.8W
WME-3M2A
90~250V AC
6.6W
(at 200V)
WME-402A
24V AC/DC
3.8W
WME-4M2A
90~250V AC
8.6W
(at 200V)
WME-502A
24V AC/DC
4.8W
WME-5M2A
90~250V AC
10.6W
(at 200V)
WM-402FB-RYGB
28V 11W
39
Stack
2~5
Rated Voltage
02: 24V AC/DC
10: 100V AC
12: 115~130V AC
20: 200~240V AC
WM-512
115~130V AC 140V 13W 49
200~240V AC 250V 11W 41
FB type approx. 60 flashes per minute.
Individual module control is possible by
special order.
45
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
WME-402AFB-RYGB
: Custom order
Stack
2~5
Note: When the same colored of modules are in one
light tower, they will light simultaneously.
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
110V 12W 40
WM-520
WM type: Bulb···T20 BA15D
Power Consumption
24V AC/DC
110V 12W 40
WM-420
WM-502
Rated Voltage
110V 12W 40
WM-312
WM-402
Model
WME-202A
110V 12W 40
WM-212
WM-302
How to order
Rated Voltage
02: 24V AC/DC
M2: 90~250V AC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
46
LGE
ø100
Height (mm)
1 Light: 244
2 Lights: 305.5
3 Lights: 367
4 Lights: 428.5
Signal Tower
Optional
Mounting Bracket
SZ-007
LGE
LGE
Dimensions
Height
Mounting Dimension
Front
Name plate
LED
85dB at 1m
Electronic
Sound 1
120°
Mounting hole
3- ø6
Wire exit
ø15
Optional
Mounting Bracket
SZ-008
ø70
36°
(FB type)
15
3-M5
(mm)
Max. panel thickness 9
(FB type)
ø100
IP54
''Super Bright'' LED
provides highest
level of visibility.
AMBER
RED
GREEN
CLEAR/WHITE
BLUE
NPN/PNP
Open collector
Wiring Diagram
Large Signal Tower featuring enhanced visibility and
downward illumination, designed for large machines.
Triple Reflection
system
· PATLITE's large prism cut lens: For enhanced downward illumination
(cut lens: ?100mm x 60mm high).
· Newly developed triple-reflection system: For enhanced visibility and low power consumption.
· Lighting Pattern: Flashing and continuous.
· FB type: Built-in buzzer with volume up to 85dB at 1m.
· Installation: Direct mount.
· Interchangeable Modules: No re-wiring even after installation.
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light
transmission.
· NPN/PNP compatible: 24V DC type; 100/220V AC compatible with NPN only.
· CE Compliance: 24V AC/DC type ONLY.
· Available Colors: Red, Amber, Green, Blue and Clear/White.
Note: See page 126 for wiring diagram
LGE type
Number of stacks
1 Light
Interchangeable LED modules
· Changeable color sequence: Easy to add /
remove up to 4 colored modules even after
installation.
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
Easy to add
and remove
If the number of LED
module is changed, center
shaft must be purchased.
2 Lights
3 Lights
4 Lights
The wiring remains the same
How to order
Model
Rated Voltage
LGE
Power Consumption
LGE-102 / 102FB
24V AC/DC
2.5W
LGE-110 / 110FB
100V AC
LGE-402FB-RYGB
5.7W
LGE-120 / 120FB
220V AC
LGE-202 / 202FB
24V AC/DC
4.5W
LGE-210 / 210FB
100V AC
8.2W
LGE-220 / 220FB
220V AC
LGE-302 / 302FB
24V AC/DC
LGE-310 / 310FB
100V AC
LGE-320 / 320FB
220V AC
LGE-402 / 402FB
24V AC/DC
LGE-410 / 410FB
100V AC
LGE-420 / 420FB
220V AC
Stack
1~4
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
6.5W
10.7W
8.5W
Rated Voltage
02: 24V AC/DC
10: 100V AC
20: 220V AC
Type
Blank: Continuous light
FB: Continuous or flashing light
with audible alarm
13.2W
FB type: approx. 60 flashes per minute.
Each color of LED module corresponds to
the lead wire color.
47
48
LGH-FK, LGEH-FK
Alarm
Comes with 8 alarm sounds.
A type
60
(mm)
Ch
Mounting Dimension
191
Front
Front
132
3
4
Bell (clear high-pitched bell)
Yelp (rapid siren)
90
3-M5
51
0°
Max.panel
thickness
10
2- ø10
3- ø6
Chime
0
S type
Q type
1
Amaryllis
Mary Had a Little Lamb
2
Symphony No.40
The Camptown Races
3
4
Silent Lakeside
Cuckoo
Mountain Musician
Blacksmith in the Village
5
Romance De Amour
On the Avignon Bridge
6
Petrouchka
Ob-La-Di,Ob-La-Da
Chime
Call sign
7
8
Wiring Diagram
LGH-FK/LGEH-FK, FL type
IP53
LGH/LGEH-FK, FL type
24V DC NPN Open Collector
Lamp Signal Line
Sound Signal Line
Lead Wire 1 Skyblue
A
Lamp 5, LED Red
Lead Wire 2 Yellow
G
Outer
contacts
Lead Wire 4 Light green
C
Lead Wire 5 Red
Continuous
Flashing
Lead Wire 7 Green
Lead Wire 8 Blue
Lead Wire COM Brown
R
Lamp 3, LED Green
Green
Lamp 2, LED Blue
Blue
Y
Light green
G
Lamp 1,
Lead Wire 6 Orange
NPN
Open collector (24V)
Red
Lamp 4, LED Amber Orange
Lead Wire 3 Pink
B
Continuous COM
Yellow
B
Flashing COM
Brown
C
Power Supply
Black
Lead Wire 1 Skyblue
Lead Wire 2 Yellow
Lead Wire 3 Pink
Lead Wire 4 Light green
Lead Wire 5 Red
Lead Wire 6 Orange
Lead Wire 7 Green
Lead Wire 8 Blue
Lead Wire COM Brown
Power supply
24V AC/DC
100V AC
220V AC
Power Supply White
Fuse
LGEH-FV type
24V DC NPN Open Collector
Outer Contacts
GND Blue
LGEH-FV type
Lamp 4, LED Blue
Sound
signal line
Integrated signal device featuring enhanced visibility and
102dB at 1m adjustable volume perfect for noisy environments.
· PATLITE's large prism cut lens: For enhanced downward illumination (lens: ?100mm x 60mm high).
· Newly developed triple-reflection system: For enhanced visibility and low power consumption.
· Lighting Pattern: Flashing and continuous.
· ADPCM 64kbit/s: High sound quality from LSI digital voice synthesizer (LGEH-FV type).
· Adjustable volume up to 102dB at 1m.
· Extended Bulb Life: Vibration-resistant Bayonet base incandescent bulbs (LGH type).
· Installation: Direct mount.
· Interchangeable Modules: No re-wiring even after installation.
· Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission.
· NPN compatible: 24V DC only.
· CE Compliant: 24V AC/DC type (LGEH-?02FK/FL/FV).
· Available Colors: Red, Amber, Green, Blue, Clear/White.
A
GND Blue
External Amplifier
C
BUSY OUT Orange
+
Lead Wire 1
Skyblue
Lead Wire 2
Yellow
Lead Wire 3
Pink
Lead Wire 4
Light green
Lamp 2, LED Blue
Lamp 1,
Lead Wire COM Brown
Yellow
Flashing
Brown
Flashing COM
Brown
Power Supply
Black
Voltage Range
LGEH-110F/LGH-110F
100V AC
90V~110V AC
LGEH-120F/LGH-120F
220V AC
200V~240V AC
100V AC
90V~110V AC
LGEH-220F/LGH-220F
220V AC
200V~240V AC
LGEH-302F/LGH-302F 24V AC/DC 22V~26V AC/DC
3 Lights
LGEH-310F/LGH-310F
100V AC
90V~110V AC
LGEH-320F/LGH-320F
220V AC
200V~240V AC
4 Lights
LGEH-410F/LGH-410F
100V AC
90V~110V AC
LGEH-420F/LGH-420F
220V AC
200V~240V AC
LGH-502F
5 Lights
Power supply
24V AC/DC
100V AC
220V AC
Signal Line
Voltage
If the number of LED
module is changed, center
shaft must be purchased.
100V AC
90V~110V AC
LGH-520F
220V AC
200V~240V AC
Sound
Signal Line
Red
Lamp 4, LED Blue
Lamp
Signal Line
Blue
Lamp 3, LED Clear Light green
Continuous
Yellow
Flashing
Brown
Power Supply Black
Power supply
Power supply
Power Supply White
Fuse
Fuse
rate
LED
Sound
Signal Line
Current
Signal Line Current
24V AC/DC 24V AC/DC
100V AC
220V AC
)
24V AC
1A
90mA
FL,FK
Voltage: 5V DC Current: 1mA
FV
Voltage: 20VDC Current: 5mA
Mass
LGEH LGH
10(14)W
28W
1.8kg 1.7kg
12W
29W
2.0kg 1.8kg
12(16)W
48W
2.0kg 1.8kg
15W
49W
2.2kg 1.9kg
14(18)W
68W
2.2kg 2.0kg
18W
69W
2.4kg 2.0kg
16(20)W
88W
2.4kg 2.1kg
21W
24V AC/DC 22V~26V AC/DC
LGH-510F
Lead Wire Com Brown
LGH
LGEH
Rated
Voltage
Power Consumption V type:(
LGEH
LGH
LGEH-202F/LGH-202F 24V AC/DC 22V~26V AC/DC
LGEH-210F/LGH-210F
C
Outer contacts
Rated
Voltage
Signal Line
Voltage
24V AC/DC 24V AC/DC
Fuse Incandescent bulb
rate Signal Line Rush
Current
Current
7A
600mA
6A
100V AC
100V AC
2A
200mA
2A
220V AC
220V AC
1A
100mA
1A
Sound
Signal Line Current
FK
Voltage: 5V DC
Current: 1mA
How to order
LGEH-102F/LGH-102F 24V AC/DC 22V~26V AC/DC
1 Light
Light green
Lamp 3, LED Green Green
Blue
Blue
Yellow
Power Supply White
Rated
Voltage
Pink
Lead Wire 4
Please cut shielded cable length as short as possible.
LGEH / LGH type
Model
Lead Wire 3
Signal line voltage and current per module
Fuse
Number of
stacks
Lead Wire 2
B
Fuse
Light green
Continuous COM
LGEH-402F/LGH-402F 24V AC/DC 22V~26V AC/DC
Easy to add
or remove
Continuous
Flashing
Lamp 3, LED Green Green
Outer
contacts
Yellow
Y
G
Red
Lamp 4, LED Amber Orange
L
STOP Red
Skyblue
Lamp 4, LED Yellow Orange
Lamp
Signal Line
Power Supply White
Continuous
Lamp 5, LED Red
Lead Wire 1
Continuous Flashing
Power Supply Black
B
2 Lights
Available by Special Order (LGEH type)
· AC 120V type.
Shielded Cable
G
R
Lamp 5, LED Red
Red
Lamp 3, LED Clear Light green
Lamp Signal Line
Sound Signal Line
AUX OUT Green
+
L
STOP Red
Lamp 3, LED Green Green
R
External Amplifier
BUSY OUT Orange
Continuous Flashing
Lamp 5, LED Red
1
Shielded Cable
AUX OUT Green
Lamp 4, LED Yellow Orange
89W
2.6kg 2.1kg
108W
2.1kg
109W
2.2kg
LGEH-402FV-RYGB
Light
LGEH: LED
LGH: Incandescent bulb
Stack
LGEH: 1~4
LGH: 1~5
Type
Rated Voltage
02: 24V AC/DC
10: 100V AC
20: 220V AC
Color
R: Red
Y: Amber
G: Green
B: Blue
C: Clear/White
Top to bottom
FV: Voice Synthesizer
FK: Alarm
FL: Chime & Melody
FB type approx. 60 flashes per minute.
LGH type:Bulb···T20 BA15D
Operating Temperature Range
FV
The wiring remains the same
7
8
TYPE OF SOUND
Ch
120°
R
· Changeable color sequence: Easy to add /
remove up to 4 colored modules even after
installation (LGEH type).
· Note: LED modules of the same color
within a signal tower will light up
simultaneously.
Rapid Hi-Lo
Melody Chime
Synthesized Piano
Synthesized Bell
Comes with 6 melodies and 2 chimes.
(LGH)
Interchangeable LED modules
Ch
LGEH-FL
(LGEH)
Triple Reflection
system
5
6
Beep (slow intermittent horn)
ø7
LED
Bulb
102dB at 1m
ø100
70
Stutter (rapid intermittent horn)
5
(FV type)
1
2
LGEH / LGH
1.5
Height (mm)
1 Light: 274
2 Lights: 336
3 Lights: 397
4 Lights: 459
5 Lights: 520
Height
Signal Tower
Voice Synthesizer
Total 16 second long recording capacity can be
divided up to 4 messages.
20
ø100
LGEH-FV
12
LGEH / LGH
LGEH / LGH
Dimensions
FK
Volume AUX Output
-10°C~+55°C (Humidity 85% or less) Max.
102dB
-20°C~+55°C (Humidity 85% or less) at 1m
BUSY Output
(Max load.)
-20dBv 600 ? 24V DC 500mA
Channel Message Time
4
Max. 16 sec.
8
Each color of LED module corresponds to
the lead wire color.
49
50
Explosion-proof Signal Tower
ATEX directive is CENELEC standard.
Classification
Standard
PATLITE
Models
ATEX, IEC/EU
Directive 94/9/EC
IEC 60079-10
EN 60079-10
EDLM, EDWM
Present
Continuously
Present
Intermittently
Present
Abnormally
Zone 0
Zone 1
Zone 2
Common in the USA
Wall Mount
NEC standard is National Electrical Code.
Classification
Standard
PATLITE
Models
Present
Continuously
Present
Intermittently
NEC Article 505
ANSI/NFPA 71
EDLM, EDWM
Zone 0
Zone 1
NEC Article 500
ANSI/NFPA 70
Flush Mount
Present
Abnormally
Zone 2
Division 1
Division 2
Horizontal Mount
Dimensions (EDLM, EDWM)
ATEX & FM
90
Fitting bracket
152
12
38
ø4.4
CENELEC Standards
Upper case
Cable gland*
Installation
(Wall-mount)
3/4? NPT
40
Glass case
(60)
ø120
Lower case
347
*ATEX model ... Included
*NEC model ... Sold separately
Lead-in port 1
Lead-in port 2
3/4? NPT
126
Bracket for flush mount
56
218
(140)
ø1
1
ø9
ø1
40
56
(Horizonal-mount)
38
15
Plug
56
Cover
9
50
*AC 120/230/90-250V types are NPN compatible only
(86)
9
Ground terminal
M4 screw
O-ring
: Compliance to ATEX and NEC standards.
: Easy wiring for parallel connection to another interlocking device through 2 lead-in ports.
: Easy connection to the signal tower by opening the bottom cover.
: Made of aluminum alloy.
: Long life, maintenance-free LED.
: Wall mount, flush mount and horizonal mount. See page 52. (Photo shows model EDWM.)
1
ø1
ø9
NPN/PNP
Open collector*
Standards
Connection
Terminal Block
Body
Light Source
Mounting
15
(48)
Terminal block
(48)
EDWM
5
EDLM
3/4? NPT
92
56
LED
IP66
50
4
Testing Authority
NEC Article 505
(415)
335
283
347
LED modules
EDLM / EDWM
Common in Europe
12
EDLM / EDWM
EDLM / EDWM
EDLM & EDWM are covered by the specifications shown in the shaded areas below
rear view: EDWM (5 color LED)
56
Terminal block
218
Specifications (ATEX)
:
:
:
:
EDLM-302FE/FA
Wiring Diagram (EDLM ( 5 color LED ))
EDWM-502FE/FA
<Casing main body>
Power
supply
L
R
Continuous light
Outer contacts
Aluminum alloy(Housing finish: Melamine baking finish)
Borosilicate glass
Stainless steel (SUS 316)
Brass
PWR wire
PWR wire
Flashing COM
LED Green
LED Amber
LED Red
L
Y
L
G
L
B
L
W
F
C
V
1
Luminosity
Mass (Mainbody)
Material
51
Upper & Lower case : Aluminum alloy(Housing finish: Melamine baking finish)
Glass case : Borosilicate glass
Fitting bracket : Stainless steel (SUS 316)
external protection fuse
1A
V
2
Power
supply
Continuous light
Outer contacts
LED White
Flashing
Outer contacts
LED Blue
LED Green
LED Amber
LED Red
EDLM-312FE/FA
EDLM-323FE/FA
EDWM-5M2FE/FA
<Casing main body>
L L L C F V V
R Y G C C 1 2
PWR wire
PWR wire
Flashing COM
Continuous COM
LED Green
LED Amber
LED Red
Continuous light
Outer contacts
Flashing
Outer contacts
Yellow
White
Blue
Green
Orange
Red
< Non-hazardous area >
external protection fuse
1A
Power
supply
Green / Yellow
<Casing main body>
Red
Orange
Green
Yellow
Brown
Gray
Black
EDLM-312FA
EDLM-323FA
EDWM-502FA
EDWM-5M2FA
AC 120V
AC 230V
AC/DC 24V
AC 90~250V
Red/Amber: 52.5mA
Red: 22.6mA, Amber: 26.6mA, Green: 17.5mA
Green: 20.0mA
Blue/White: 38.9mA
Class ? , Zone 1
AEx d ?C T6
-25?~+50? (no ice)
45%~85%RH (Keep from dew condensation)
80~110kpa
Flashing (60±12 flashes per minute) / Continuous light
IP66
9.8m/s 2
Outdoor & Indoor Upright & Sideways
Outdoor & Indoor Upright
Red/Green/White: 1000mcd
Red: 350mcd, Amber: 580mcd
Green: 1300mcd
Amber: 700mcd, Blue: 300mcd
4.3kg
4.7kg
Green / Yellow
EDLM-302FA
AC/DC 24V
< Non-hazardous area >
PWR wire
PWR wire
Flashing COM
Flashing
Outer contacts
Specifications (NEC)
Type
Rated voltage
Signal line current
(Per LED module)
Explosion protection ratings
Operating temp.
Operating humidity
Ambient pressure
Lighting pattern
IP
Vibration resistance
Mounting
Yellow
V
2
Gray
V
1
Brown
F
C
White
L
G
Blue
L
Y
Red
external protection fuse
1A
L
R
Green
< Non-hazardous area >
Orange
Gray
Yellow
Brown
Green
<Casing main body>
Black
Upper & Lower case
Glass case
Fitting bracket
Cable gland
Material
Wiring Diagram (EDLM ( 3 color LED ))
Gray
Mass (Main body)
EDLM-323FE
AC 230V
Brown
Luminosity
EDWM-502FE
EDWM-5M2FE
AC/DC 24V
AC 90~250V
Red: 22.6mA, Amber: 26.6mA, Green: 17.5mA
Blue/White: 38.9mA
l l 2 G Ex d ?C T 6 ( Z one1, 2)
?2D E x t D A 21 I P 66 T 80 ? ( Z one21, 22)
-20?~+50? (no ice)
45%~85%RH (Keep from dew condensation)
80~110kpa
Flashing (60±12 flashes per minute) / Continuous light
IP66
9.8m/s 2
Outdoor & Indoor
Upright & Sideways
Outdoor & Indoor
Upright
Red/Green/White: 1000mcd
Red: 350mcd, Amber: 580mcd
Amber: 700mcd, Blue: 300mcd
Green: 1300mcd
4.3kg
4.7kg
EDLM-312FE
AC 120V
Red/Amber: 52.5mA
Green: 20.0mA
Orange
EDLM-302FE
AC/DC 24V
Red
Type
Rated voltage
Signal line current
(Per LED module)
Explosion protection ratings
Operating temp.
Operating humidity
Ambient pressure
Lighting pattern
IP
Vibration resistance
Mounting
(mm)
Set screw
L L L L L C F V V
R Y G B W C C 1 2
PWR wire
PWR wire
Flashing COM
Continuous COM
LED White
LED Blue
LED Green
LED Amber
LED Red
< Non-hazardous area >
external protection fuse
1A
Power
supply
Continuous light
Outer contacts
Flashing
Outer contacts
52