DATA SHEET
UNITRONIC BUS HFFR L2/FIP FC
UL/CSA (CMG) 1 x 2 x 0.64
2170853
valid from :
12.04.2007
Application
Halogen free, High flame retardant data cable for fieldbus system PROFIBUS DP,PROFIBUS FMS,
(Siemens SIMATIC NET) acc. to DIN 19245, part 3 and EN 50 170 cable type A, and for fieldbus
system FIP (Factory Instrumentation Protocol) as well as for high performance data networks with 150
Ohms nominal impedance. The cable is designed for the system-defined transmission rates of 9.6
Kbit/s up to 12 Mbit/s, the transmission characteristics conform to the system and guarantee a high
operating security during the data transmission.
This data cable provides special advantages for the use in sensitive areas, where flame propagation
must be avoided and the presence of toxic fumes would cause personal injuries and damage of
property.
UNITRONIC BUS HFFR L2/FIP FC UL/CSA is suitable for permanent installation in dry and wet
rooms. Due to it‘s double screening it is suitable for installation in electromagnetically demanding
areas.
With the „Fast Connect“ stripping tool the cable is intended for the fast mounting of the connectors.
By one single operation the end of the cable is prepared for connection, especially if the IDC
(Insulation Displacement Connector) method of termination is used.
Design
2
Conductor
Insulation
Stranding
Wrapping
Inner sheath
Screening
Solid bare copper, 0,32 mm , (22AWG) ∅ 0.64 mm
Skin-Foam-Skin PE core Ø approx. 2.55 mm, cores red and green
two cores twisted in pair
one layer plastic foil
thermoplastic and halogen free compound, interstice filled extruded
plastic laminated aluminum foil, metal side outwards
and on top braiding of tin Copper wire
PUR flame retardant and halogen free compound, violet similar to
RAL 4001, outer diameter Ø approx. 7.9 mm
Sheath
Sheath Marking:
®
LAPP KABEL
UNITRONIC BUS HFFR L2/FIP FC UL/CSA 1x2x0,64 c((UL)us
CMG 60°C AWG22(SHIELDED) E224252
ROHS ART. 2170853
RV
MM
elaborated by:
TE-K: A. Khan
Document:
DB2170853EN
page 1 of 2
DATA SHEET
2170853
UNITRONIC BUS HFFR L2/FIP FC
UL/CSA (CMG) 1 x 2 x 0.64
valid from :
12.04.2007
Electrical properties at 20° C
Resistance (loop)
Screen resistance
Insulation resistance
Mutual capacitance at
Characteristic Impedance at
Line attenuation
800
9.6
38.4
3 up to 20
9.6
38.4
4
16
Transfer impedance at
up to
Nominal velocity of propagation
Operating voltage (not for power purposes)
Test voltage
core/core
core/screen
Hz
kHz
kHz
MHz
kHz
kHz
MHz
MHz
20 MHz
max.Ω/km
max.Ω/km
min. GΩxkm
nom. nF/km
Ω
Ω
Ω
max. dB/100m
max. dB/100m
max. dB/100m
max. dB/100m
115
10
5
28
270 ± 27
185 ± 18.5
150 ± 15
0.25
0.4
2.2
4.2
max. mΩ/m
nom.
peak value V
10
0.81c
250
Ueff.
V
1500
Mechanical and thermal properties
Minimum bending radius
Permissible temperature range
for static
cable diameter x
for flexible
°C
for Static
°C
Sheath stripping force for a length of 50 mm ± 10%
Flame propagation
flame retardant acc. to CSA FT-4
IEEE 1202 acc. to UL1685 (CMG)
IEC 60332-3
Total weight of cable
approx. 75 kg/km
PVC weight
0 kg/km
RoHS directive
elaborated by:
TE-K: A. Khan
Document:
10
-10 to + 70
-30 to + 80
min. 5 N, max. 70 N
This cable confirms to RoHS directive (2002/95/EG)
DB2170853EN
page 2 of 2