Section G Index
EQUIPMENT PROTECTIVE DEVICES
Surge Suppression Product Features.................................................................G1
Surge Suppression Duplex Receptacles ............................................................G2
Quadplex® Receptacles ......................................................................................G3
Portable Surge Devices Product Features .........................................................G4
Hard-Wired Product Features.............................................................................G5
Panel-Mounted and Portable Surge Protectors..................................................G6
Zone Surge Protection........................................................................................G7
Surge Receptacle Technical Specifications........................................................G8
Isolated Ground Receptacle Product Features...................................................G9
Isolated Ground Straight Blade Receptacles....................................................G10
Isolated Ground Flush Receptacles..................................................................G11
Isolated Ground Locking Receptacles..............................................................G12
Product Features
Isolated Ground
Surge Suppression Receptacles
Easy break-off tabs.
INNOVATIVE TRIPLE SQUARE
M.O.V. PACKAGING
Orange triangle
signifies isolated
ground for maximum
protection.
Green dot signifies UL
hospital grade, assures
maximum toughness.
Meets UL and
CSA varistor
thermal protection
requirements.
M.O.V.'s rated at
150V AC
Fashion Series™ face
and wall plate design.
Total printed circuit
board construction.
Fast retrofitting in all
standard boxes.
L.E.D.
indicator
Rating stamped on yoke
for permanent
identification.
Snub hole
wiring aid
Self-grounding clip for
ease of installation.
Terminal screws accept up to
#10 stranded or solid wire.
SP83IGBL
PLUG INTO PROTECTION
Eliminate costly equipment damage and subsequent
downtime from transient voltage fluctuations with
Bryant’s CIRCUIT WATCH isolated ground duplex
surge suppression receptacles. These devices stop
virtually all voltage transients from internal and external
sources. All CIRCUIT WATCH devices are UL Listed
and CSA Certified.
SPECIFICATIONS
Bryant surge receptacles conform to the following
specifications.
y Transient suppression capacity peak energy will be
240 joules for a 10 x 1000 microsecond pulse
SP52IG
y Common and normal mode protection Common
mode transients: hot to ground, neutral to ground
Normal mode transients: hot to neutral
AVAILABLE TYPES
y Response time less than 5 nanoseconds
y Receptacles available in brown, blue, ivory, white,
and gray
y Varistor continuous RMS rating: 150 volts
y Receptacle rating 15 and 20 amps 125V
y Construction of base and cover is high-impact
thermoplastic
y Available with and without isolated
ground feature
y Receptacles meet the following standards:
IEEE 587, Category A & B; UL 1449, UL 498,
CSA C22.2, No 42
SP53IGBL
Product specifications appearing in the following section are subject to change without notice.
y 2-pole 3-wire 15 amp and 20 amp
y Hospital grade/industrial grade
y 240 joule I.G. terminal receptacles
ISOLATED GROUND SURGE
RECEPTACLE
Combines isolated ground feature with 240 joule surge
suppression protection in one easy-to-wire duplex
receptacle. Large #8 brass binding head terminal
accepts up to #10 solid or stranded wire.
SP52IGGRY
SP53IGW
G
1
NEMA 5-15
NEMA 5-20
Surge Suppression Receptacles
2-Pole 3-Wire Grounding, 15 Amp 125V; 20 Amp 125V
Features - Specifications
y Snub hole wiring aid
240 JOULE I.G. VERSION
y Meets or exceeds IEEE 587
Standards (A & B); exceeds
portable surge rating
requirements, UL 1449,
UL 498, CSA 22.2, No. 42 (15
amp only) and UL 1283
y Peak clamping level 400 volts all modes
y Maximum surge current
15,000 amps all modes
y Unique triple square M.O.V.
rated at 150V
y Bright green L.E.D. indicator light
y UL 1449 ANSI/IEEE
C62.41 (IEEE587)
y High-impact nylon molded face cover
y CSA C22.2, No. 42
y Binding head terminal screw
will accept up to #12 solid or
stranded wire
y NOM
y Self-grounding clip yoke design
DUPLEX SURGE SUPPRESSION RECEPTACLES (INCLUDES WALL PLATES)
CAT. NO.
SP53IGI
SP52IG
SP52IGBL
SP52IGGRY
SP52IGI
SP52IGW
SP53IG
SP53IGBL
SP53IGGRY
SP53IGI
SP53IGW
SP82IG
SP82IGBL
SP82IGI
SP83IG
SP83IGBL
SP83IGI
AMP
RATING
COLOR
JOULES
15
15
15
15
15
20
20
20
20
20
15
15
15
20
20
20
Brown
Blue
Gray
Ivory
White
Brown
Blue
Gray
Ivory
White
Brown
Blue
Ivory
Brown
Blue
Ivory
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
PRODUCT DIMENSIONS – (
DESCRIPTION
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Industrial grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
Hospital grade, isolated ground, nylon
) Indicates mm dimensions
1.64 (41.7)
1.29 (32.8)
.10 (2.5)
SP83IGBL
3.28
(83.3)
4.10
(104.1)
3.81
(96.8)
1.13 (28.7)
1.36 (34.5)
SP52IGI
G
2
Specifications are subject to change without notice.
2.69
(68.3)
2.61
(66.3)
Surge Suppression Receptacles
NEMA 5-15
NEMA 5-20
2-Pole 3-Wire Grounding, 15 Amp 125V; 20 Amp 125V
Response Time: approximately 5ns
(nanoseconds)
Input Voltage: 125V AC, 60 Hz
Current 20 ampere max.
branch circuit
Receptacle rating 15 and 20
ampere 125V
STANDARDS
UL 1449
ANSI/IEEE C62.41-1980
CSA TIL #1-11B/Standard
C22.2 #8-M1986.
Hospital grade requirements in accordance
with UL 498
UL Listed File #E2258 –
Guide #RTRT
CSA Certified File #LR16215 –
Guide #365E1
CSA C22.2, No. 42
Electrical Specifications
Transient Suppression
Capacity peak energy 80 joules for
a 10x 1000µS pulse
Common and Normal Mode
Protection. Common Mode
Transients: hot-to-ground and
neutral-to-ground. Normal
Mode Transients: hot-to- neutral
Maximum Clamping Voltage:
test current 100 amperes
peak (8x20µS); 360 volts
Varistor Peak Clamping
Voltage: 212 volts minimum,
243 volts maximum @ 1
milliampere D.C.
Varistor Size: 20MM
Varistor Continuous RMS
Voltage Rating: 150 volts
Capacitance @ 1 kHz; 2000
pf ± 30%
Features
QUADPLEX RECEPTACLES
Rugged Lexan® construction
Mounts directly to 4" (101.6)
square or octagon boxes, no
cover plate required. Meets
410-56 (i) of the NEC
Quadplex can be retrofitted to
1- and 2-gang device boxes,
4" (101.6) square boxes with
mud rings, or 4 11/16” (119.1)
square boxes with easy-toinstall adapter plates
Saves wiring and installation
time
Accepts 4 straight or molded
angle plugs
Large #8 brass binding head
terminal screws, approved for
CU only, accepts up to #12
solid or stranded wire
QUADPLEX® SURGE SUPPRESSION RECEPTACLES
1254SIA
CAT. NO.
AMP
RATING
1254SA
1254SIA
1254HSA
1254HSIA
21254SA
21254SIA
21254HSA
21254HSIA
21254SLA
21254SILA
COLOR
15
15
15
15
20
20
20
20
20
20
JOULES
Blue
Ivory
Blue
Ivory
Blue
Ivory
Blue
Ivory
Blue
Ivory
80
80
80
80
80
80
80
80
80
80
DESCRIPTION
Isolated ground, Lexan®
Isolated ground, Lexan
Hospital grade, isolated ground, Lexan
Hospital grade, isolated ground, Lexan
Isolated ground, Lexan
Isolated ground, Lexan
Hospital grade, isolated ground, Lexan
Hospital grade, isolated ground, Lexan
Wire leads, isolated ground, Lexan
Wire leads, isolated ground, Lexan
QUADPLEX ADAPTER PLATES
CATALOG NUMBER
FOR 4" (101.6) SQ., ONE
& TWO GANG BOXES
DESCRIPTION
FOR
411/16" (119.1) BOXES
ADAPBLU
ADAPI
ADAPBLUS
ADAPIS
PRODUCT DIMENSIONS – (
Blue, Lexan
Ivory, Lexan
) Indicates mm dimensions
.375 (9.5)
.104 (2.64)
.104 (2.64)
2.75 (69.9)
21254SA
3.28
(83.3)
.921
(23.4)
.921
(23.4)
3.38
(85.9)
.312
(7.9)
1.75 (44.5)
3.38 (85.9)
4.25
(108.0)
2.75
(70.0)
.188 (4.8)
4.78 SQ. (121.4)
1.75 (44.5)
1254SA, 21254SA SERIES
µS=Microseconds.
Specifications are subject to change without notice.
ADAP SERIES
ADAPS SERIES
G
3
NEMA 5-15
Product Features and Ordering Data
Portable Surge Devices
Impact-resistant plastic
end caps.
Bryant Tech-Spec® ivory
nylon plug (ST2, ST3)
Ivory cord, 14/3 SJT,
available in 6' and 15'
lengths.
Kellems®
strain relief
Bryant Industrial Grade
receptacles (ST2, ST3)
Combination
master
switch/pilot light
Aluminum
construction,
lightweight and
durable.
High-quality noise
filtering.
Indicator light - when
lit, surge suppression
is working.
Three levels of surge
protection; Competitive
(ST1), Intermediate (ST2),
and Tech-Spec (ST3).
“Press-to-reset” circuit
breaker.
Features - Specifications
CIRCUIT WATCH™ PORTABLE SURGE STRIPS
14/3 SJT ivory cord 6' (1828.8) and 15' (4572) available (ST1)
Tech-Spec® ivory nylon plug (ST2-ST3)
Plug-in unit has phone line protection
ALL UNITS
Surge protection “on” indicator light
140 joule rated
QUADPLEX® SURGE CORD SET
12/3 SJO ivory cord 6' (1828.8)
Tech-Spec® ivory nylon plug
High-impact polycarbonate construction
80 joule rated receptacles
Quadplex surge cord set is UL Listed File #E125479
Quality EMI/RFI filtering
Press-to-reset circuit breaker
UL Listed and CSA Certified ST1, ST2, ST3
Lightweight and durable aluminum construction
High impact-resistant plastic end caps
Kellems® strain reliefs
PORTABLE SURGE STRIPS NEMA 5-15 15 AMP 125V
CAT. NO.
ST26
AMP
RATING
COLOR
JOULE
RATING
DESCRIPTION
ST16
15
Ivory
140
6 outlets, 6 ft. (1828.8) cord, competitive protection
ST115
15
Ivory
140
6 outlets, 15 ft. (4572) cord, competitive protection
ST26
10
Ivory
140
6 outlets, 6 ft. (1828.8) cord, intermediate protection
ST36
10
Ivory
140
6 outlets, 6 ft. (1828.8) cord, Tech-Spec® protection
STPIP
10
Ivory
140
Plastic, 2 outlets, plug-in, with phone line protection, competitive protection level
QUADPLEX SURGE CORD SET NEMA 5-15 15 AMP 125V
T1254SI6A
15
Ivory
PRODUCT DIMENSIONS – (
STPIP
80
4 outlets, 6 ft. (1828.8) cord, competitive protection
) Indicates mm dimensions
SEE CAT. NO
STRAIN RELIEF
RESET
BUTTON
2.08
(52.8)
POWER ON-OFF
G
4
INDICATOR LIGHT
13.000 (330.2)
ST16
T1254SI6A
For Quadplex dimensions, see pages B-13 and B-14.
Specifications are subject to change without notice.
1.96
(49.8)
Product Features
70 and 140
Panel-Mounted and Portable Surge Protectors
Tamper-resistant
fasteners
Lighted LED indicators verify
that protection is present for
each phase
Solid state diagnostics Metal
Oxide Varistor technology
Surface mount 4 x .21"
diameter holes or floor
mount
Unit available with
standard 20 or 30
A locking plug and
connector
UL 1449
Granular insulation for added
protection
Available in
panel-mount
and portable
Durable, high-impact
enclosure is corrosion and
dent resistant
Close nipple
flush mount
Specifications are subject to change without notice.
G
5
Panel-Mounted and Portable Surge Protectors
Mounting: Surface mount via 4 x .21"
diameter holes or floor mount
Features - Specifications
ALL MODELS
Solid state diagnostics
ALL mode protection (L-N,
L-G, L-L & N-G)
Metal oxide varistor technology
Low impedance construction
Thermal and short circuit fusing for safety
UL 1449 Listed
Ten-year limited warranty
Durable, lightweight, corrosion-resistant,
high-impact plastic enclosures
SS950/SS955
CIRCUIT WATCH PORTABLE
Models SS950 (Single-Phase) & SS955
(Single-Phase)
70,000A surge capacity per phase
Enclosure: Durable, lightweight,
corrosion-resistant, high-impact plastic
Dimensions: 5.3" x 5.3" x 2.3"
Weight: 3.6 lb.
Connection: Locking Type
CIRCUIT WATCH 70
Models HWS500 (Split-Phase), HWS555
(3-Phase) & HWS560 (3-Phase)
CIRCUIT WATCH 140
Models HWS750 (3-Phase) & HWS755
(3-Phase)
140,000A surge capacity per phase
Remote indication contacts
Close nipple mount
Dimensions: 6.25"x 4.312" x 6.75"
Weight: 6 lbs.
Connection: Same as above
70,000A surge capacity per phase
Remote indication
Close nipple mount
UL 1283 Listed Filter
Model HWS500
NEMA 1, 2, 3, 3R, 4, 4X, 12 & 13
Dimensions: 4.5" x 2.9" x 2.5"
Weight: 2 lbs.
Connection: #12 AWG stranded (approx 18")
Mounting: Surface mount via 4" x .21"
diameter holes
Close nipple via 1/2" nipple
Models HWS555 & HWS560
Dimensions: 5.3" x 5.3" x 2.3"
Weight: 3.6 lbs.
Connection: Same as above
ELECTRICAL SPECIFICATIONS
LET-THROUGH VOLTAGE
HWS500
CAT.
NO.
SERVICE
VOLTAGE
UL1449
500A
(8/20ms)
CAT. B3
3000A
(8/20ms)
CAT. C3
10 kA
200A
RING
INTERNAL
MCOV
SS950
SS955
HWS500
HWS555
HWS560
HWS750
HWS755
125V 1Ø 20A L5-20
125V 1Ø 30A L5-30
120/240V Split Ø3 Wire
120/208V 3Ø4-Wire WYE
277/480V 3Ø4-Wire WYE
120/208V 3Ø4-Wire WYE
277/480V 3Ø4-Wire WYE
330V
330V
400V
400V
700V
330V
700V
310V
310V
310V
310V
690V
282V
680V
435V
435V
435V
435V
890V
416V
820V
N/A
N/A
730V
730V
1200V
628V
1180V
315V
315V
315V
315V
690V
230V
550V
140V AC
140V AC
140V AC
140V AC
320V AC
140V AC
320V AC
CIRCUIT WATCH
PORTABLE
CAT. NO.
Maximum
Surge
Capacity
Duty Cycle
Performance
HWS750/HWS755
G
6
Remote
Indication
CIRCUIT WATCH
140
SS950
SS955
HWS500
HWS555
HWS560
HWS750
HWS755
70,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
140,000A
(8/20ms)
140,000A
(8/20ms)
L-N
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
L-L
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
L-G
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
35,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
N-G
18,000A
(8/20ms)
18,000A
(8/20ms)
18,000A
(8/20ms)
18,000A
(8/20ms)
18,000A
(8/20ms)
70,000A
(8/20ms)
70,000A
(8/20ms)
N/A
N/A
N/A
N/A
N/A
1 Impulse
1 Impulse
1 Impulse
1 Impulse
1 Impulse
1 Impulse
1 Impulse
N/A
N/A
>2,500
Impulses
>2,500
Impulses
>2,500
Impulses
>2,500
Impulses
>2,500
Impulses
>2,500
Impulses
>2,500
Impulses
Infinite
Infinite
Infinite
Infinite
Infinite
Infinite
Infinite
N/A
N/A
Normally
Closed
Rated 2A,
125V AC
Normally
Closed
Rated 2A,
125V AC
Normally
Closed
Rated 2A,
125V AC
Normally
Closed
Rated 2A,
125V AC
Normally
Closed
Rated 2A,
125V AC
Maximum Surge
Current Capacity
Per Phase
HWS555/HWS560
CIRCUIT WATCH
70
140,000A
(8/20 ms)
70,000A
(8/20 ms)
10,000A
(8/20 ms)
100A
(8/20 ms)
Tested per ANSI/IEEE C62.45 and ANSI/IEEE C62.41
Specifications are subject to change without notice.
Zone Surge Protection
Specifications are subject to change without notice.
G
7
Industrial Grade
Isolated Ground Surge Suppression Receptacles
Technical Specifications
STRAIGHT BLADE DUPLEX RECEPTACLE
DESCRIPTION
Manufacturer’s
Identification —
NEMA 5-15
Bryant SP52IG Series
Description — Industrial
Grade Isolated Ground Surge Suppression
Duplex Receptacle
Type — 2-Pole, 3-Wire, Grounding
Rating — 15A, 125V
CERTIFICATION
UL Listed, File E2258
UL Standards 1449 Transient Voltage
Surge Suppressor and 498 Receptacles
Certified to CSA, C22.2, No. 42
CSA File #LR16215
ANSI/IEEE C62.41 (IEEE 587) categories
“A” and “B”
NEMA WD-6
Meets UL and CSA varistor
thermal protection requirements
COMPONENTS
MATERIALS
Cover
Nylon
Base
Nylon
Line Contacts
High Performance Brass
Clamp Nut
.031" (.8) Brass
Mounting Yoke
.050" (1.3) Steel (Nickel-Plated)
Terminal Screws
Brass #8-32
Grounding Screw
Brass (Green) #8-32
Ground Contacts
High Performance
Auto. Grounding Assembly
Stainless Steel
Flat Head Mounting Screws
Zinc-Plated Steel
PERFORMANCE
UL Listed Category ............400V
Voltage ..............................125V AC ± 10%.
Frequency..........................60 Hz.
Protection Modes ..............Normal and Common.
Noise Filtration ..................RFI and EMI 100KHz,
4MHz-10DB to -20DB.
Electrical
Response Time ............................Less than 5 Nanoseconds (ns)
Transient Suppressions ................Normal Mode (L-N), Common Mode
(L-G) (N-G)
Peak Energy 10X 1000µs ............240 Joules
Peak Current 8X 20µs..................15,000A
Terminal Identification
Terminals identified in accordance with UL 498 (Brass, White, Green).
Terminal Accommodation. . . . . . . . . . . . . . . . . . . #14 — #10 AWG copper conductor only.
Product Identification . . . . . . . . . . . . . . . . . . . . . . Ratings are a permanent part of the device.
Mechanical
Flammability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cover: UL 94 V2.
Base: UL 94 V2.
Operating Temperatures . . . . . . . . . . . . . . . . . . . Maximum continuous 20°C to 55°C.
Environmental
PRODUCT DIMENSIONS – (
Additional
) Indicates mm dimensions
1.64 (41.7)
1.29 (32.8)
.10 (2.5)
SP53IG series
NEMA 5-20
SP82IG series
NEMA 5-15
3.28
(83.3)
4.10
(104.1)
SP83IG series
3.81
(96.8)
2.69
(68.3)
2.61
(66.3)
NEMA 5-20
1.13 (28.7)
1.36 (34.5)
SP52IGI
G
8
Specifications are subject to change without notice.
Product Features
Isolated Ground Receptacles
Bushing
Nylon full face
design
One-piece,
triple-wipe brass line
contacts
Nylon base
Ground contacts and
ground
termination
Insulation
barrier
Nickel and brass plated
wraparound steel yoke
Characteristics of Isolated Ground Wiring Devices
Isolated ground devices help limit electrical noise on the equipment grounding
circuit by providing two grounding paths for the installation. The device grounding circuit terminal and grounding contacts are isolated from the grounding path
of the metal outlet box, device mounting means, and metal cover or wall plate,
thus establishing a separate, dedicated equipment grounding path for connecting noise-sensitive equipment.
PRINCIPLES OF OPERATION
Green Hex Head
Grounding Screw
and Circuit
Mounting Strap
Grounded
Metal Outlet
Box (c)
Green Hex Head
Grounding Screw
and Circuit
Mounting Strap
Grounded
Metal Outlet Box
Bonding
Jumper
Insulating
Barrier(a)
Conduit
Isolated
Ground
(b)
Building Ground
Conduit
Ground path
indicated
in green
Building Ground
ISOLATED GROUND RECEPTACLE
CONVENTIONAL RECEPTACLE
Isolated ground receptacles are not grounded to building ground at the
receptacle location. Grounding of this device requires that an isolated ground
path be established from the receptacle grounding terminal to a suitable
equipment grounding point “upstream” from the device.
Insulating barrier (a) prevents grounding circuit (b) from making contact with the
outlet box (c) which otherwise would ground the receptacle through the building
ground.
Conventional receptacles are grounded to building ground at the receptacle
outlet. When mounted in the box, a single grounding path is established
through the grounded metal outlet box and the building ground system.
G
9
NEMA 5-15
NEMA 5-20
NEMA 6-15
NEMA 6-20
CSA 5-20R
&
Isolated Ground
Straight Blade Receptacles
UL Listed File #E2258 – Guide #RTRT
CSA Certified File #LR16215
– Guide #365E1
Complies with performance
requirements of Federal
Specification WC596
(where applicable)
Complies with NEMA
Standard WD-6, UL 498 and
CSA C22.2 No. 42
NOM
(8210, 5261, 8310, 5361 &
8410 – four wiring pockets)
Terminal screws: brass
combination Phillips/slotted/
Robertson binding head
accepts up to #10 wire
Approved for CU wire only
Large green, combination
Phillips/slotted binding hex
head grounding screw
One-piece triple-wipe brass
line contacts
Strip gauge for accurate back wiring
Features - Specifications
Molded of high-impact,
chemical-resistant nylon
Heavy-duty wraparound steel
yoke locked in for maximum
strength and security
Double-plated yoke (nickel &
brass) to resist corrosion
Back wiring: eight wiring pockets for
convenient feed-thru
wiring, clamp-type terminals
accepts up to #10 wire (duplex),
15 AMP 125V ISOLATED GROUND BACK AND SIDE WIRED NEMA 5-15
5262IG
CATALOG NUMBER
DUPLEX
SINGLE
8200IG
8210IG
8200IGC
—
8200IGTR
—
5262IG
5261IG
5262IGC
5261IGC
5262IGI
5261IGI
5262IGGRY
5261IGGRY
5262IGW
5261IGW
DESCRIPTION
Orange nylon, hospital grade
Orange nylon, hospital grade w/Robertson head screws
Orange nylon face, tamper resistant
Orange nylon
Orange nylon, w/Robertson head screws
Ivory nylon
Gray nylon
White nylon
20 AMP 125V ISOLATED GROUND BACK AND SIDE WIRED NEMA 5-20
8300IG
5362IG
5362CANIG
5362IGI
5362IGGRY
5362IGW
8310IG
5361IG
—
5361IGI
5361IGGRY
5361IGW
Orange nylon, hospital grade
Orange nylon
Orange nylon, w/Robertson head screws
Ivory nylon
Gray nylon
White nylon
15 AMP 250V ISOLATED GROUND BACK AND SIDE WIRED NEMA 6-15
5662IG
5261IG
—
Orange nylon
20 AMP 250V ISOLATED GROUND BACK AND SIDE WIRED NEMA 6-20
—
5462IG
8410IG
—
Orange nylon, hospital grade
Orange nylon
FASHION SERIES™ 9000 ISOLATED GROUND RECEPTACLES
15 AMP 125V
NEMA 5-15
9200IG
9200IGGRY
9200IGI
9200IGRED
9200IGW
20 AMP 125V
NEMA 5-20
9300IG
9300IGGRY
9300IGI
9300IGRED
9300IGW
DESCRIPTION
Orange nylon, hospital grade, back and side wired
Gray nylon, hospital grade, back and side wired
Ivory nylon, hospital grade, back and side wired
Red nylon, hospital grade, back and side wired
White nylon, hospital grade, back and side wired
QUADPLEX ISOLATED GROUND RECEPTACLES
1254HIGO
1254IGO
—
9200IG
21254HIGO
21254IGO
21254IGOL
PRODUCT DIMENSIONS – (
Orange Lexan®, hospital grade
Orange Lexan
Orange Lexan, with wire leads
) Indicates mm dimensions
1.38 (35.1)
3.28
(83.3)
4.06
(103.1)
3.28
1.78 (83.3)
(45.2)
2.68 4.06 2.38
(68.1) (103.1) (60.5)
3.28
(83.3)
1.17 (29.7)
.93
(23.6)
1.29
(32.8)
2.61
(66.3)
3.81
(96.8)
1254IGO
G
10
1.38 (35.1)
.92
(23.4)
5262IG
See page B-13 for Quadplex dimensions and features.
To be discontinued when supplies are exhausted.
Specifications are subject to change without notice.
1.38 (35.1)
5261IG
.91
(23.1)
9300IG
2.69
(68.3)
Isolated Ground
Straight Blade Receptacles
UL Listed File #E2258 – Guide #RTRT
CSA Certified File #LR16215
– Guide #365E1
NOM
Features - Specifications
FLUSH RECEPTACLE
Face molded of arc-resistant
thermoplastic polyester
Pressure screw terminals for secure
terminations
Heavy-duty tin plated brass double-wipe
contacts
Application
Prevents stray currents from affecting
ultra-sensitive electronic equipment such as
data-collecting systems and medical monitoring
equipment. A separate grounding
wire provides a pure or isolated path to ground
STRAIGHT BLADE DEVICES
CATALOG NO.
9530IG
RATING
CONFIG.
NEMA NO.
9530IG
2-pole, 3-wire
30 Amp 125V
5-30R
9630IG
2-pole, 3-wire
30 Amp 250V
6-30R
9550IG
2-pole, 3-wire
50 Amp 125V
5-50R
9650IG
2-pole, 3-wire
50 Amp 250V
6-50R
DESCRIPTION
Receptacles - Single, flush,
back wired, orange RTP
“ISOLATED GROUND” WALL PLATES
CATALOG NO.
ISOLATED
GROUND
DESCRIPTION
ORANGE NYLON, STANDARD SIZE
HOT STAMPED, RECESSED BLACK LETTERING
Duplex opening, one gang
Single receptacle opening, one gang
Locking opening, 1.62 (41.1) ID, one gang
Fashion type opening, one gang, unmarked
9630IG
N3901IG
N3911IG
N39111IG
N3901D
“COMPUTER ONLY” WALL PLATES
CATALOG NO.
COMPUTER
ONLY
DESCRIPTION
NYLON, MID-SIZE
HOT STAMPED, RECESSED BLACK LETTERING
Orange, duplex opening, one gang
Orange, single receptacle opening, one gang
Ivory, duplex opening, one gang
Ivory, fashion type opening, one gang
N3901MC
N3911MC
N2101MC
N2101DMC
9550IG
PRODUCT DIMENSIONS – (
6 x 32
TAP
) Indicates mm dimensions
1.81 (46.0)
2.35 (59.9)
1.79 (45.6)
3.68
(93.5)
3.28
(83.3)
2.50
(63.3)
2.37
(60.3)
2.12
(54.0)
2.25 (57.2)
9530IG, 9630IG, 9550IG & 9650IG
9650IG
RTP – Reinforced Thermoplastic Polyester.
See Section N for more information on wall plates.
Specifications are subject to change without notice.
G
11
Isolated Ground
Locking Receptacles
15 AMP SINGLE RECEPTACLE
Face and base molded of
impact/chemical-resistant nylon
One-piece rivetless
copper-alloy contacts
.050 (1.3) brass yoke
Deep slotted #8 brass
terminal screws; terminals accept
up to #12 solid or stranded
conductors
DUPLEX RECEPTACLE
RTP construction
Back wired, individual wiring
pockets, clamp-type terminals
Terminals accept up to #12
solid or stranded conductors
Features - Specifications
4700DRIG
20/30 AMP SINGLE
RECEPTACLE
Impact/chemical-resistant
nylon face
Base molded of reinforced
thermoplastic polyester
Combination back and side
wiring, clamp-type terminals,
accept #14 through #8 AWG
solid or stranded conductors
Deep slotted #10 bronze
terminal screws resist
corrosion and are color-coded for
easy identification
One-piece rivetless
copper-alloy contact design
ALL RECEPTACLES
UL Listed File #E2258 – Guide #RTRT
CSA Certified File #LR16215 –
Guide #365E1
Comply with NEMA Standards WD-6;
UL 498
Comply with performance
requirements of Federal
Specification WC596
NOM
CE
ISOLATED GROUND RECEPTACLES
CATALOG
NUMBER
RATING
2-Pole 3-Wire
15 Amp 125V
2-Pole 3-Wire
15 Amp 125V
2-Pole 3-Wire
15 Amp 250V
2-Pole 3-Wire
15 Amp 250V
2-Pole 3-Wire
20 Amp 125V
2-Pole 3-Wire
20 Amp 250V
2-Pole 3-Wire
30 Amp 125V
2-Pole 3-Wire
30 Amp 250V
3-Pole 4-Wire
20 Amp 125/250V
3-Pole 4-Wire
30 Amp 125/250V
4-Pole 5-Wire
20 Amp 120/208V 3ØY
4-Pole 5-Wire
30 Amp 120/208V 3ØY
4700DRIG
4710IG
70615DRIG
70615IG
4710IG
70520IG
70620IG
70530IG
70630IG
71420IG
71430IG
72120IG
72130IG
70520IG
CONFIG.
PRODUCT DIMENSIONS – (
L5-15R
L5-15R
L6-15R
L6-15R
L5-20R
L6-20R
L5-30R
L6-30R
L14-20R
L14-30R
L21-20R
L21-30R
1.70 (43.2)
2.38
(60.5)
2.74
(69.5)
DESCRIPTION
Duplex, back wired,
orange RTP
Single, side wired,
orange nylon face
Duplex, back wired,
orange RTP
Single, side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
Single, back or side wired,
orange nylon face
) Indicates mm dimensions
1.70
(43.2)
3.28
(83.3)
NEMA
NUMBER
1.24 (31.5)
.26
(6.6)
6 x 32
TAP
3.28 1.56
(83.3) (39.6)
DIA.
1.70 (43.2)
2.67 2.38
(67.8) (60.5)
6 x 32
TAP
1.56
3.28 (39.6)
(83.3) DIA.
.934
(23.72)
1.17
(29.67)
72130IG
G
12
4700DRIG
Reinforced Thermoplastic Polyester
See page H-8 and H-10 for dimensions on 4710 and 70615
series receptacles.
70520IG
72130IG
Specifications are subject to change without notice.
1.30 (33.0)
.26
(6.6)
2.67
(67.8)