FLOOR | WALL | COUNTERTOPS

Cover photo features ONE Quartz Surfaces in Snow Leopard.
Photo features ONE Quartz Surfaces in Spanish Moss.
With the ONE Quartz Surfaces ® Collection, we’ve brought together the beauty of quartz and modern technology to create new and exciting possibilities. Available in both slab and tile, ONE Quartz Surfaces ® gives you more design choices for your next project.
The low maintenance and durability of ONE Quartz Surfaces ® countertops make it perfect for any application, commercial or residential. Functional yet chic, that’s what
ONE Quartz Surfaces ® is all about.
• AVAILABLE IN THREE COLLECTIONS:
Nature Flecks, Geo Flecks and Micro Flecks.
Within these collections, you’ll have more
selection than ever before.

LUMINESCE NQ75 WHITE SAND NQ97
FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
NATURE FLECKS COLLECTION
CARRARA GIOIA NQ63
CALACATTA NQ06 WHITE STATUARY NQ12 SNOW LEOPARD NQ96
MARBELESQUE NQ74 ASH GREY NQ69* MOLTEN GREY NQ95
HONEYED MAHOGANY NQ94
*Material also stocked in honed finish

FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
NATURE FLECKS COLLECTION
PRODUCT INFORMATION
Finishes Thickness
Polished (Stocked)
Semi-polished (Special Order)
Honed (Special Order)*
Leather (Special Order)
1-1/4"
(3 cm)
3/4"
(2 cm)
* Ash Grey Honed is stocked.
Custom slab finishes in semi-polished, honed and leather are available by special order.
Thinner slabs available upon request. Please contact your local slab center to confirm sizes and availability.
Standard tile sizes available by special order only where applicable.
INSTALLATION
Grout Joint Recommendation
Tile : 1/16"
Shade Variation
Low (V1)
FLOOR APPLICATIONS
Dry & Level – Interior
Wet & Level – Interior
Exterior Applications;
Pool Decking & Other Wet Areas with Minimal Footwear
Target
DCOF wet
N/A
≥ 0.42
≥ 0.60
Suitable
*
Ramps & Inclines ≥ 0.65
ONE Quartz Surfaces do not meet minimum coefficient of friction thresholds recommended by safety standard-setting organizations. Water, oil, grease, etc., create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.
OTHER APPLICATIONS
Walls/Backsplashes
Countertops
Pool Linings
APPLICATION NOTES:
* NQ91, NQ30, NQ09, NQ76, NQ66, NQ75, NQ96, NQ97, NQ06,
NQ12, and NQ63 are not recommended for flooring use.
Nature Flecks Collection not suitable for exterior applications due to small resin content. The sun will etch the material.
Suitable
SLAB TEST RESULTS
Breaking Strength
Compressive Strength (min)
Abrasion Resistance
Abrasion Wear Index
Thermal Expansion
Water Absorption
Flexural Strength
Ultraviolet Light Resistance
Stain & Chemical Resistance
(24-hour immersion)
ASTM#
C648
C170
C241
C501
C531
C97
C880
G23
Result
1,207 lbs.
22,082 psi
60+
120
1.2 x 10-5
.03 - 0.1%
4,744 psi
Passes
No effect
TILE TEST RESULTS
Water Absorption
Compressive
Strength (min)
Flexural Strength
Chemical Resistance
Abrasion Resistance
ASTM#
C97
C170
22,082 psi
C650
C1027
Result
.03 - 0.1%
22,082 psi
4,744 psi
Resistant
3
NOTES
ONE Quartz Surfaces products are nonporous, reducing the potential for bacteria growth, resist common food stains and are stronger than natural granite.
ONE Quartz Surfaces products are virtually maintenance free.
ONE Quartz Surfaces products contain natural quartz stone providing consistent color and visual movement. A wide range of color options allow for more design freedom.
ONE Quartz Surfaces products have a durable, scratch-resistant surface.
ONE Quartz Surfaces products are heat and scorch-resistant under normal cooking conditions (use of a trivet is recommended for longer or extreme heat exposure).
Visit daltile.com/ONEQuartz for additional polished, semi-polished, honed and leather finish details.
Fifteen-year limited warranty. Visit daltile.com/ONEQuartz for details.
White thin-set or mortar is recommended for the lighter colors of
ONE Quartz Surfaces tiles.
For information refer to “Factors to Consider” at daltile.com/Factors.
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code reader at:
GET.DALTILE.COM
Generated by BeQRious.com

FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
MICRO FLECKS COLLECTION
MORNING FROST NQ30 WOVEN WOOL NQ09 SIMPLY WHITE NQ76
FRESH LINENS NQ66 CANCUN BEACH NQ11 SEA SALTS NQ53
SAND STORM NQ26 EVENING GREY NQ43 BRUSHED FLANNEL NQ60
METEOR SHOWER NQ25 STRAWBERRY PATCH NQ67* STAR GAZER NQ10
*Special order only

FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
MICRO FLECKS COLLECTION
PRODUCT INFORMATION
Finishes Thickness
Polished (Stocked)
Semi-polished (Special Order)
Honed (Special Order)
Leather (Special Order)
1-1/4"
(3 cm)
3/4"
(2 cm)
Custom slab finishes in semi-polished, honed and leather are available by special order.
Thinner slabs available upon request.
Please contact your local slab center to confirm sizes and availability.
Standard tile sizes available by special order only where applicable.
INSTALLATION
Grout Joint Recommendation
Tile : 1/16"
Shade Variation
Low (V1)
NOTES
ONE Quartz Surfaces products are nonporous, reducing the potential for bacteria growth, resist common food stains and are stronger than natural granite.
ONE Quartz Surfaces products are virtually maintenance free.
ONE Quartz Surfaces products contain natural quartz stone providing consistent color and visual movement. A wide range of color options allow for more design freedom.
ONE Quartz Surfaces products have a durable, scratch-resistant surface.
ONE Quartz Surfaces products are heat and scorch-resistant under normal cooking conditions (use of a trivet is recommended for longer or extreme heat exposure).
Visit daltile.com/ONEQuartz for additional polished, semi-polished, honed and leather finish details.
Fifteen-year limited warranty. Visit daltile.com/ONEQuartz for details.
White thin-set or mortar is recommended for the lighter colors of
ONE Quartz Surfaces tiles.
For information refer to “Factors to Consider” at daltile.com/Factors.
FLOOR APPLICATIONS
Dry & Level – Interior
Wet & Level – Interior
Target
DCOF wet
N/A
≥ 0.42
Suitable
*
Exterior Applications;
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
≥ 0.60
≥ 0.65
ONE Quartz Surfaces do not meet minimum coefficient of friction thresholds recommended by safety standard-setting organizations.
Water, oil, grease, etc., create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.
OTHER APPLICATIONS
Suitable
Walls/Backsplashes
Countertops
Pool Linings
APPLICATION NOTES:
* NQ91, NQ30, NQ09, NQ76, NQ66, NQ75, NQ96, NQ97, NQ06,
NQ12, and NQ63 are not recommended for flooring use.
Micro Flecks Collection not suitable for exterior applications due to small resin content. The sun will etch the material.
SLAB TEST RESULTS
Breaking Strength
Compressive Strength (min)
Abrasion Resistance
Abrasion Wear Index
Thermal Expansion
Water Absorption
Flexural Strength
Ultraviolet Light Resistance
Stain & Chemical Resistance
(24-hour immersion)
ASTM#
C648
C170
C241
C501
C531
C97
C880
G23
Result
1,207 lbs.
22,082 psi
60+
120
1.2 x 10-5
.03 - 0.1%
4,744 psi
Passes
No effect
TILE TEST RESULTS
Water Absorption
Compressive
Strength (min)
Flexural Strength
Chemical Resistance
Abrasion Resistance
ASTM#
C97
C170
22,082 psi
C650
C1027
Result
.03 - 0.1%
22,082 psi
4,744 psi
Resistant
3
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code reader at:
GET.DALTILE.COM
Generated by BeQRious.com

FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
GEO FLECKS COLLECTION
SPANISH MOSS NQ21
CHIPPED ICE NQ91
STORMY SKY NQ24
SUMMER DAWN NQ17 PACIFIC SAND NQ22
RIVERBANK NQ93 MIDNIGHT CANYON NQ92

FLOOR | WALL | COUNTERTOPS
ONE QUARTZ SURFACES ®
GEO FLECKS COLLECTION
PRODUCT INFORMATION
Finishes Thickness
Polished (Stocked)
Semi-polished (Special Order)
Honed (Special Order)
Leather (Special Order)
1-1/4"
(3 cm)
3/4"
(2 cm)
Custom slab finishes in semi-polished, honed and leather are available by special order.
Thinner slabs available upon request.
Please contact your local slab center to confirm sizes and availability.
Standard tile sizes available by special order only where applicable.
INSTALLATION
Grout Joint Recommendation
Tile : 1/16"
Shade Variation
Low (V1)
NOTES
ONE Quartz Surfaces products are nonporous, reducing the potential for bacteria growth, resist common food stains and are stronger than natural granite.
ONE Quartz Surfaces products are virtually maintenance free.
ONE Quartz Surfaces products contain natural quartz stone providing consistent color and visual movement. A wide range of color options allow for more design freedom.
ONE Quartz Surfaces products have a durable, scratch-resistant surface.
ONE Quartz Surfaces products are heat and scorch-resistant under normal cooking conditions (use of a trivet is recommended for longer or extreme heat exposure).
Visit daltile.com/ONEQuartz for additional polished, semi-polished, honed and leather finish details.
Fifteen-year limited warranty. Visit daltile.com/ONEQuartz for details.
White thin-set or mortar is recommended for the lighter colors of
ONE Quartz Surfaces tiles.
For information refer to “Factors to Consider” at daltile.com/Factors.
DESIGNED TO HELP EARN LEED™
CREDITS.
For more detailed information, visit daltilegreenworks.com.
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code reader at:
GET.DALTILE.COM
Generated by BeQRious.com
FLOOR APPLICATIONS
Dry & Level – Interior
Wet & Level – Interior
Target
DCOF wet
N/A
≥ 0.42
Suitable
*
Exterior Applications;
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
≥ 0.60
≥ 0.65
ONE Quartz Surfaces do not meet minimum coefficient of friction thresholds recommended by safety standard-setting organizations.
Water, oil, grease, etc., create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.
OTHER APPLICATIONS
Suitable
Walls/Backsplashes
Countertops
Pool Linings
APPLICATION NOTES:
* NQ91, NQ30, NQ09, NQ76, NQ66, NQ75, NQ96, NQ97, NQ06,
NQ12 , and NQ63 are not recommended for flooring use.
Geo Flecks Collection not suitable for exterior applications due to small resin content. The sun will etch the material.
SLAB TEST RESULTS
Breaking Strength
Compressive Strength (min)
Abrasion Resistance
Abrasion Wear Index
Thermal Expansion
Water Absorption
Flexural Strength
Ultraviolet Light Resistance
Stain & Chemical Resistance
(24-hour immersion)
ASTM#
C648
C170
C241
C501
C531
C97
C880
G23
Result
1,207 lbs.
22,082 psi
60+
120
1.2 x 10-5
.03 - 0.1%
4,744 psi
Passes
No effect
TILE TEST RESULTS
Water Absorption
Compressive
Strength (min)
Flexural Strength
Chemical Resistance
Abrasion Resistance
ASTM#
C97
C170
22,082 psi
C650
C1027
Result
.03 - 0.1%
22,082 psi
4,744 psi
Resistant
3
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile ® products and information, visit our website at daltile.com.
©2016 Dal-Tile Corporation (5/16)