Photometry

advertisement
Venere Catalog4207
4/17/07
12:37 PM
Page 18
Venere Catalog4207
VENERE™ SERIES | Specifications
HOUSING
4/17/07
2:22 PM
Page 3
The Venere™ Series offers both contemporary and
traditional style wall sconces to accentuate
doorways and building entrances while providing
egress illumination during a power failure.
The fixture housing is cast aluminum. The cylindrical lens is opal, semi translucent injection molded acrylic. The lens frame is secured with three captive hex-head (9/64”) screws.
The lens frame is sealed with a memory retentive, molded silicone gasket. The rear electrical access has a molded silicone plug to completely seal the fixture from insects or dirt
emanating from the electrical box or conduit. All internal and external hardware is stainless
steel and zinc.
REFLECTOR
The reflector is formed aluminum with bright dip anodized finish for large sized fixtures and
bead blasted finish for small fixtures. Fixtures ordered with R111 lamping will ship with the
metal halide R111 lamp with a built-in reflector.
ELECTRICAL
The ballast is mounted on the ballast canopy. All ballasts are electronic. T6 metal halide
lamps will use G12 sockets; R111 lamps will use GX8.5 sockets; PL-L fluorescent lamps
will use 2G11 sockets; MR16 lamps will use a miniature bi-pin base. The ballast will accept
an input voltage of 120 through 277 volts, accept for MR16 lamping which will accept an
input voltage of 120 volts only. The egress lamp (20 watt MR11) for emergency egress
feature is included and is powered by 120 volt input transformed into low-voltage (12 volt)
by the electronic transformer (included).
SAFETY
The fixture includes an integral secondary source to provide illumination to path of egress
from building to the public way.
FINISH
The finish for the all aluminum parts will consist of a five stage pretreatment regimen with
a polymer primer sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification
that includes passing a 3000-hour salt spray test for corrosion resistance.
INSTALLATION
Wall plate is secured into wall over j-box and wired to the power circuit and fixture is
attached to the wall plate by four set-screws.
CERTIFICATION
The fixture is listed with ETL for outdoor, wet location use to the U.L.1598, UL 924, CSA
141 and Canadian CSA std. C22.2 no.250 standard. Luminaire is IP 65 rated.
WARRANTY
The fixture is warranted for three years. Ballast components carry the ballast manufacturer’s limited warranty.
Venere (ven-AIR-ay) Italian word meaning Evening Star.
Also a direct translation of the word Venus, and means to venerate or worship.
Architectural Area Lighting | Venere™ Series
[ 18 ]
aal.net
Architectural Area Lighting | Venere™ Series
[3]
aal.net
Venere Catalog4207
4/17/07
2:15 PM
Page 4
Venere Catalog4207
4/17/07
12:36 PM
Page 17
VENERE™ SERIES | Dimensions
The Venere series provides
versatile,
high
performance
lighting to meet the practical
11.63
aspects of illuminating a site
13.00
8.75
12.50
without scarring the building
surface.
The
contemporary
family comes standard with
stainless steel rods and with a
25.50
26.38
variety of modern screens for
accents. The traditional series
fixtures also include a choice of
architectural fascias.
VSTL
VSCL
Fixture weight 29lb/13.15kg
Fixture weight 26lb/11.79kg
10.25
9.13
19.88
19.63
VSTS
VSCS
Fixture weight 17lb/7.71 kg
Fixture weight 17lb/7.71 kg
Architectural Area Lighting | Venere™ Series
[4]
aal.net
9.88
7.00
Architectural Area Lighting | Venere™ Series
[ 17 ]
aal.net
Venere Catalog4207
4/17/07
2:37 PM
Page 16
Venere Catalog4207
4/17/07
12:27 PM
Page 5
VENERE™ SERIES | Easy Installation & Maintenance
STEP 2
Plug the disconnect
into the fixture.
Hang onto the
mounting plate.
Please note:
Photograph is shown
for connectivity purposes
only - there is no hinge
from fixture to plate.
STEP 1
Secure the cast back
plate to the wall over a
standard junction box.
A quick disconnect
plug is then wired to
the power leads.
STEP 3
Tighten the four
set screws (top and bottom)
to secure the fixture to the
mounting plate.
Architectural Area Lighting | Venere™ Series
[ 16 ]
aal.net
Architectural Area Lighting | Venere™ Series
[5]
aal.net
Venere Catalog4207
4/17/07
12:28 PM
Page 6
Venere Catalog4207
4/17/07
VENERE™ SERIES | Optical System
12:35 PM
Page 15
VENERE™ SERIES | Ordering - Small Traditional
The Venere™ Series offers up to six(6)* optical configurations to choose from.
1.
Catalog No.
Description
VSTS-DB
Down beam with built-in MR-11 lamp and socket.
VSTS-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTS-UB
Up beam with built-in MR-11 lamp and socket.
VSTS-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTS-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSTS-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
UB
Up Beam
DBUS
Down Beam / Up Spread
VSCL - SMALL CONTEMPORARY
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
US
Up Spread
COMPACT FLUORESCENT
Catalog No.
Description
24PLL
24 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 24 watt lamp.
HALOGEN
Catalog No.
Description
50MR16
50 watt MR-16 lamp, 12 volt transformer (included).
3.
DB
Down Beam
UBDS
Up Beam / Down Spread
DS
Down Spread
Catalog No.
Description
DT
Decorative ties only.
DTJA
Decorative ties with jack screen design.
DTGO
Decorative ties with gothic screen design.
DTFL
Decorative ties with fleur screen design.
DTCS
Decorative ties with custom screen design.
4.
Architectural Area Lighting | Venere™ Series
[6]
aal.net
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
BRP
Decorative screen (DTJA/DTGO/DTFL/DFTS) in brass material.
5.
*Note: Only the fixtures containing the
MHT6 offer all six(6) configurations.
DECORATIVE FASCIA OPTIONS
Shown with NEG. No egress
lamp (blocked opening).
COLOR
Catalog No.
AWT
LYG
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
CRT
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Description
Corten
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
[ 15 ]
aal.net
Venere Catalog4207
4/17/07
12:35 PM
Page 14
Venere Catalog4207
4/17/07
VENERE™ SERIES | Ordering - Large Traditional
1.
Page 7
VENERE™ SERIES | Elevated Scale
VSTL - LARGE TRADITIONAL
Catalog No.
Description
VSTL-DB
Down beam with built-in MR-11 lamp and socket.
VSTL-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTL-UB
Up beam with built-in MR-11 lamp and socket.
VSTL-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTL-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSTL-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
12:28 PM
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
70MHT6EB
70 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
70R111
70 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
50PLL
50 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 50 watt lamp.
3.
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
DT
Decorative ties only.
DTJA
Decorative ties with jack screen design.
DTGO
Decorative ties with gothic screen design.
DTFL
Decorative ties with fleur screen design.
DTCS
Decorative ties with custom* screen design.
4.
* Customer will need to contact factory for
custom designs
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
BRP
Decorative screen (DTJA/DTGO/DTFL/DFTS) in brass material.
5.
COLOR
Catalog No.
AWT
LYG
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
CRT
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Description
Corten
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
VSCS-DBUS
Small Contemporary with
down beam / up spread.
The fleur trim of the traditional Venere will
compliment an elegant brick entry.
[ 14 ]
aal.net
VSCL-DS
Large Contemporary
with down spread.
VSTS-DBUS
Small Traditional with
down beam / up spread.
Architectural Area Lighting | Venere™ Series
VSTL-DS
Large Traditional
with down spread.
[7]
aal.net
Venere Catalog4207
4/17/07
2:32 PM
Page 8
Venere Catalog4207
4/17/07
VENERE™ SERIES | Egress Lighting - Large & Small
12:34 PM
Page 13
VENERE™ SERIES | Ordering - Small Contemporary
FIXTURE
�
LAMP/BALLAST
1
1.
The hidden MR11 lamp, powered as a remote
head, provides code-required 1 footcandle
path-of-egress illumination, from the building
up to 15 feet toward the common way.
3
4
�
COLOR
5
VSCL - SMALL CONTEMPORARY
Description
Down beam with built-in MR-11 lamp and socket.
VSCS-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 AAH).
VSCS-UB
Up beam with built-in MR-11 lamp and socket.
VSCS-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 AAH).
VSCS-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSCS-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
24PLL
24 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 24 watt lamp.
Venere Large-MR11 35W
12 FT Mounting Ht. / 12 FT Spacing
HALOGEN
Catalog No.
Description
50MR16
50 watt MR-16 lamp, 12 volt transformer (included).
Venere Small-MR11 20W
8 FT Mounting Ht. / 8 FT Spacing
[8]
aal.net
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
SSRW
Without stainless steel rods.
SSWD
Stainless steel rods with wide slot screen.
SSNW
Stainless steel rods with narrow slot screen.
SSPF
Stainless steel rods with perforated screen.
SSCS
Stainless steel rods with custom* screen.
4.
Architectural Area Lighting | Venere™ Series
OPTIONS
VSCS-DB
3.
Egress opening shown here on the
Small Traditional.
2
�
Catalog No.
2.
Egress opening shown here on the
Large Contemporary.
FACIA OPTIONS
�
* Customer will need to contact factory for
custom designs
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
SSP
Decorative fascia (SSWD/SSNW/SSPF/SSCS) screen in stainless steel.
5. COLOR
Catalog No.
AWT
LYG
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Shown with NEG. No egress
lamp (blocked opening).
Description
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
[ 13 ]
aal.net
Venere Catalog4207
4/17/07
2:25 PM
Page 10
Venere Catalog4207
CONTEMPORARY | Style & Facia Options
VSCL | SSPF
VSCL
With stainless steel rods
Page 11
TRADITIONAL | Style & Facia Options
VSTL | DT
Stainless steel rods with narrow slot screen
VSCL | SSCS
VSCL | SSWD
2:27 PM
VSCL | SSNW
Stainless steel rods with perforated screen
Stainless steel rods with wide slot screen
4/17/07
Decorative ties only
VSTL | DTFL
VSTL | DTJA
Decorative ties with jack screen design
Stainless steel rods with custom* screen
VSTL | DTGO
Decorative ties with gothic screen design
VSTL | DTCS*
Decorative ties with fleur screen design
* Custom option DTCS is also available on
the traditional fixtures
* Customer will need to contact factory for
custom designs
VSCS
With stainless steel rods
VSCS | SSPF
Stainless steel rods with
perforated screen
VSCS | SSNW
Stainless steel rods with
narrow slot screen
VSCS | SSWD
Stainless steel rods with
wide slot screen
VSCS | SSCS
Stainless steel rods with
custom* screen
VSTS | DT
Decorative ties only
VSTS | DTGO
VSTS | DTJA
Decorative ties with gothic Decorative ties with jack
screen design
screen design
VSTS | DTFL
Decorative ties with fleur
screen design
* Customer will need to contact factory for
custom designs
Architectural Area Lighting | Venere™ Series
[ 10 ]
aal.net
Architectural Area Lighting | Venere™ Series
[ 11 ]
aal.net
TRADITIONAL | Style & Facia Options
VSTL | DT
Decorative ties only
VSTL | DTGO
Decorative ties with gothic screen design
VSTL | DTFL
VSTL | DTJA
Decorative ties with jack screen design
VSTS | DT
Decorative ties only
Decorative ties with fleur screen design
* Custom option DTCS is also available on
the traditional fixtures
VSTS | DTGO
VSTS | DTJA
Decorative ties with gothic Decorative ties with jack
screen design
screen design
Architectural Area Lighting | Venere™ Series
page11new.indd 1
VSTL | DTCS*
[ 11 ]
VSTS | DTFL
Decorative ties with fleur
screen design
aal.net
6/5/07 7:35:08 AM
VENERE™ SERIES | Ordering - Large Contemporary
FIXTURE
FIXTURE
11
1.
�
LAMP/BALLAST
LAMP/BALLAST
FACIA OPTIONS
FASCIA
OPTIONS
�
2
2
�
33
OPTIONS
OPTIONS
44
COLOR
COLOR
5 5
VSCL - LARGE CONTEMPORARY
Catalog No.
Description
VSCL-DB
Down beam with built-in MR-11 lamp and socket.
VSCL-DS
Down spread with built-in MR-11 lamp and socket.
VSCL-UB
Up beam with built-in MR-11 lamp and socket.
VSCL-US
Up spread with built-in MR-11 lamp and socket.
VSCL-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSCL-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
�
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
70MHT6EB
70 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
70R111
70 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
50PLL
50 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 50 watt lamp.
3.
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
SSRW
Without stainless steel rods.
SSWD
Stainless steel rods with wide slot screen.
SSNW
Stainless steel rods with narrow slot screen.
SSPF
Stainless steel rods with perforated screen.
SSCS
Stainless steel rods with custom* screen.
4.
* Customer will need to contact factory for
custom designs
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
SSP
Decorative fascia (SSWD/SSNW/SSPF/SSCS) screen in stainless steel.
5. COLOR
Catalog No.
AWT
LYG
LGY
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Description
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
page12new.indd 1
The clean look of the contemporary Venere
is a versatile element of many architecturally
styled compositions.
[ 12 ]
aal.net
6/5/07 4:06:29 PM
VENERE™ SERIES | Ordering - Small Contemporary
FIXTURE
FIXTURE
1
1
1.
�
LAMP/BALLAST
LAMP/BALLAST
FACIA OPTIONS
FASCIA
OPTIONS
�
2
2
�
OPTIONS
OPTIONS
33
44
�
COLOR
COLOR
5 5
VSCL - SMALL CONTEMPORARY
VSCS
Catalog No.
Description
VSCS-DB
Down beam with built-in MR-11 lamp and socket.
VSCS-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 AAH).
VSCS-UB
Up beam with built-in MR-11 lamp and socket.
VSCS-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 AAH).
VSCS-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSCS-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
24PLL
24 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 24 watt lamp.
HALOGEN
Catalog No.
Description
50MR16
50 watt MR-16 lamp, 12 volt transformer (included).
3.
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
SSRW
Without stainless steel rods.
SSWD
Stainless steel rods with wide slot screen.
SSNW
Stainless steel rods with narrow slot screen.
SSPF
Stainless steel rods with perforated screen.
SSCS
Stainless steel rods with custom* screen.
4.
* Customer will need to contact factory for
custom designs
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
SSP
Decorative fascia (SSWD/SSNW/SSPF/SSCS) screen in stainless steel.
5. COLOR
Catalog No.
AWT
LGY
LYG
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Architectural Area Lighting | Venere™ Series
page13new.indd 1
Shown with NEG. No egress
lamp (blocked opening).
Description
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
[ 13 ]
aal.net
6/5/07 4:06:09 PM
VENERE™ SERIES | Ordering - Large Traditional
1.
VSTL - LARGE TRADITIONAL
Catalog No.
Description
VSTL-DB
Down beam with built-in MR-11 lamp and socket.
VSTL-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTL-UB
Up beam with built-in MR-11 lamp and socket.
VSTL-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTL-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSTL-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
70MHT6EB
70 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
70R111
70 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
50PLL
50 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 50 watt lamp.
3.
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
DT
Decorative ties only.
DTJA
Decorative ties with jack screen design.
DTGO
Decorative ties with gothic screen design.
DTFL
Decorative ties with fleur screen design.
DTCS
Decorative ties with custom* screen design.
4.
* Customer will need to contact factory for
custom designs
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
BRP
Decorative screen (DTJA/DTGO/DTFL/DFTS) in brass material.
5.
COLOR
Catalog No.
AWT
LYG
LGY
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
CRT
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Description
Corten
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
page14new.indd 1
The fleur trim of the traditional Venere will
compliment an elegant brick entry.
[ 14 ]
aal.net
6/5/07 7:34:24 AM
VENERE™ SERIES | Ordering - Small Traditional
1.
VSTS
VSCL--SMALL
SMALLTRADITIONAL
CONTEMPORARY
Catalog No.
Description
VSTS-DB
Down beam with built-in MR-11 lamp and socket.
VSTS-DS
Down spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTS-UB
Up beam with built-in MR-11 lamp and socket.
VSTS-US
Up spread with built-in MR-11 lamp and socket (Available only w/ T6 MH).
VSTS-DBUS
Down beam / up spread with built-in MR-11 lamp and socket (Available only with T6 MH).
VSTS-UBDS
Up beam / down spread with built-in MR-11 lamp and socket (Available only with T6 MH).
2.
HID - METAL HALIDE
Catalog No.
Description
39MHT6EB
39 watt electronic metal halide ballast, 120/277 volt. Uses a G12 base, clear T-6 ceramic lamp (lamp not included).
35R111
35 watt electronic metal halide R111, 120/277 volt (includes lamp).
COMPACT FLUORESCENT
Catalog No.
Description
24PLL
24 watt PL-L compact fluorescent ballast, 120/277 volts. Uses a 4-pin, 24 watt lamp.
HALOGEN
Catalog No.
Description
50MR16
50 watt MR-16 lamp, 12 volt transformer (included).
3.
DECORATIVE FASCIA OPTIONS
Catalog No.
Description
DT
Decorative ties only.
DTJA
Decorative ties with jack screen design.
DTGO
Decorative ties with gothic screen design.
DTFL
Decorative ties with fleur screen design.
DTCS
Decorative ties with custom screen design.
4.
OPTIONS
Catalog No.
Description
NEG
No egress lamp (blocked opening).
BRP
Decorative screen (DTJA/DTGO/DTFL/DFTS) in brass material.
5.
Catalog No.
AWT
LYG
LGY
MAL
MDG
ATG
VBL
WRZ
DGN
CRT
Description
Arctic White
Light Grey
Matte Aluminum
Medium Grey
Antique Green
Verde Blue
Weathered Bronze
Dark Green
Corten
Catalog No.
CRT
BRM
DBZ
BLK
MTB
RAL
CUSTOM
Description
Corten
Metallic Bronze
Dark Bronze
Black
Matte Black
Provide a RAL
4 digit color no.
Please provide color
chip for matching
Architectural Area Lighting | Venere™ Series
page15new.indd 1
Shown with NEG. No egress
lamp (blocked opening).
COLOR
[ 15 ]
aal.net
6/5/07 7:34:43 AM
Venere Catalog4207
4/17/07
2:37 PM
Page 16
Venere Catalog4207
4/17/07
12:27 PM
Page 5
VENERE™ SERIES | Easy Installation & Maintenance
STEP 2
Plug the disconnect
into the fixture.
Hang onto the
mounting plate.
Please note:
Photograph is shown
for connectivity purposes
only - there is no hinge
from fixture to plate.
STEP 1
Secure the cast back
plate to the wall over a
standard junction box.
A quick disconnect
plug is then wired to
the power leads.
STEP 3
Tighten the four
set screws (top and bottom)
to secure the fixture to the
mounting plate.
Architectural Area Lighting | Venere™ Series
[ 16 ]
aal.net
Architectural Area Lighting | Venere™ Series
[5]
aal.net
Venere Catalog4207
4/17/07
2:15 PM
Page 4
Venere Catalog4207
4/17/07
12:36 PM
Page 17
VENERE™ SERIES | Dimensions
The Venere series provides
versatile,
high
performance
lighting to meet the practical
11.63
aspects of illuminating a site
13.00
8.75
12.50
without scarring the building
surface.
The
contemporary
family comes standard with
stainless steel rods and with a
25.50
26.38
variety of modern screens for
accents. The traditional series
fixtures also include a choice of
architectural fascias.
VSTL
VSCL
Fixture weight 29lb/13.15kg
Fixture weight 26lb/11.79kg
10.25
9.13
19.88
19.63
VSTS
VSCS
Fixture weight 17lb/7.71 kg
Fixture weight 17lb/7.71 kg
Architectural Area Lighting | Venere™ Series
[4]
aal.net
9.88
7.00
Architectural Area Lighting | Venere™ Series
[ 17 ]
aal.net
Venere Catalog4207
4/17/07
12:37 PM
Page 18
Venere Catalog4207
VENERE™ SERIES | Specifications
HOUSING
4/17/07
2:22 PM
Page 3
The Venere™ Series offers both contemporary and
traditional style wall sconces to accentuate
doorways and building entrances while providing
egress illumination during a power failure.
The fixture housing is cast aluminum. The cylindrical lens is opal, semi translucent injection molded acrylic. The lens frame is secured with three captive hex-head (9/64”) screws.
The lens frame is sealed with a memory retentive, molded silicone gasket. The rear electrical access has a molded silicone plug to completely seal the fixture from insects or dirt
emanating from the electrical box or conduit. All internal and external hardware is stainless
steel and zinc.
REFLECTOR
The reflector is formed aluminum with bright dip anodized finish for large sized fixtures and
bead blasted finish for small fixtures. Fixtures ordered with R111 lamping will ship with the
metal halide R111 lamp with a built-in reflector.
ELECTRICAL
The ballast is mounted on the ballast canopy. All ballasts are electronic. T6 metal halide
lamps will use G12 sockets; R111 lamps will use GX8.5 sockets; PL-L fluorescent lamps
will use 2G11 sockets; MR16 lamps will use a miniature bi-pin base. The ballast will accept
an input voltage of 120 through 277 volts, accept for MR16 lamping which will accept an
input voltage of 120 volts only. The egress lamp (20 watt MR11) for emergency egress
feature is included and is powered by 120 volt input transformed into low-voltage (12 volt)
by the electronic transformer (included).
SAFETY
The fixture includes an integral secondary source to provide illumination to path of egress
from building to the public way.
FINISH
The finish for the all aluminum parts will consist of a five stage pretreatment regimen with
a polymer primer sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification
that includes passing a 3000-hour salt spray test for corrosion resistance.
INSTALLATION
Wall plate is secured into wall over j-box and wired to the power circuit and fixture is
attached to the wall plate by four set-screws.
CERTIFICATION
The fixture is listed with ETL for outdoor, wet location use to the U.L.1598, UL 924, CSA
141 and Canadian CSA std. C22.2 no.250 standard. Luminaire is IP 65 rated.
WARRANTY
The fixture is warranted for three years. Ballast components carry the ballast manufacturer’s limited warranty.
Venere (ven-AIR-ay) Italian word meaning Evening Star.
Also a direct translation of the word Venus, and means to venerate or worship.
Architectural Area Lighting | Venere™ Series
[ 18 ]
aal.net
Architectural Area Lighting | Venere™ Series
[3]
aal.net
Venere Catalog4207
4/17/07
12:37 PM
Page 19
VENERE™ SERIES | Photometry
70MH R111 10mt htX10spacing
50WPLL 10mt htX10spacing
Architectural Area Lighting | Venere™ Series
[ 19 ]
aal.net
Venere Catalog4207
4/17/07
12:38 PM
Page 20
14249 Artesia Blvd. • P.O. Box 1869 • La Mirada, CA 90638-1869
T 714.994.2700 • F 714.994.0522 • aal.net
©2007 Architectural Area Lighting | Design Patents Pending | Made in the USA | 01.2007
Venere Catalog4207
4/17/07
12:21 PM
Page 1
Download