clamps and clips

advertisement
CLAMPS AND
CLIPS
Adhesive Nylon Wire and Cable Clips
Backed with closed-cell, foamed
polyurethane adhesive tape for excellent
conformability, high temperature and
solvent resistance, plus high ultimate
bond strength. Mounting area should be
D
L
W
FA 125
FA 250
FA 375
FA 500
1/8
1/4
3/8
1/2
.760
1.380
1.500
1.600
3/8
1/2
5/8
3/4
HA 125
HA 250
HA 375
HA 500
1/8
1/4
3/8
1/2
.493
.865
1.000
1.125
3/8
1/2
5/8
3/4
Part No.
L
W
D
L
clean, dry and dust free. Some porous
surfaces may need priming before
installation.
Supplied on easy-to-use, perforated
liner strips in sets of 6 to 10 pieces.
Minimum order 1000.
W
D
Heavy Duty Clips
For use with cable, tubing, rod, etc.
These screw-mount clips are made of
natural nylon and have reinforced sides
which allow them to be used for heavier
Part No.
HSM
HSM
HSM
HSM
HSM
HSM
HSM
125
187
250
312
375
437
500
than normal loads. Designed also as
space savers, you can use them on
edges or in tight spots. Use with a #10
screw.
D
L
.115
.172
.234
.297
.359
.422
.484
.675
.732
.793
.859
.910
.980
1.044
Minimum order 1000.
Stocked in white. Also available in black.
40
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Black Nylon Clips
Use as tube and wire supports, guides,
bundlers. All devices snap through 1/4"
diameter hole in 1/32" to 1/8" thick
material. Maximum side width of all
clips is 3/8".
Part No.
Tube OD
Height Above
Panel
Closed top–feed-through guide
ET 8
1/2
5/8
1/8
1/4
5/16
3/8
1/2
7/32
11/32
13/32
15/32
5/8
1/4
1/4 + 1/4
3/16
3/16
Open top–single tube
OT
OT
OT
OT
OT
2
4
5
6
8
Space saver side clip
SS 4
DS 4
Closed top (wrap around)–single tube or bundles
CT
CT
CT
CT
CT
CT
CT
CT
4
6
8
9
10
12
16
20
1/4
3/8
1/2
9/16
5/8
3/4
1
1-1/4
7/16
15/32
5/8
23/32
3/4
7/8
1-5/32
1-13/32
Minimum order 100.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
41
Value-Line Tree Clips
An economical alternative choice when you’re looking
for a branched tree-style clip.
For use in drilled, punched or moulded threaded or
non-threaded holes. Works with many materials including
metal, wood, foam, rubber and plastic, in both solid and
compressed forms.
Push in/pull out forces may vary depending on variation
in hole diameter.
Prong
Length
Prong
Type
Head
Diameter
Head
Style
-.250
-.312
-.210
-.312
-.400
.308
.531
.438
.480
.560
X
X
X
R
X
.240
.375
.437
.437
.337
Flat
Mod. Flat
Flat
Round
Round
.080
.030
.100
.060
.080
-.402
-.512
-.600
-.480
-.312
.640
.680
.700
.700
.500
X
R
X
X
X
.437
.437
.470
.750
.609
Flat
Round
Binder**
Flat**
Flat
.234
.250
.250
.250
.250
.140
.095
.090
.098
.098
-.750
-.320
-.350
-.472
-.800
.945
.500
.610
.802
1.060
X
X
R
R
R
.500
.750
.700
.700
.700
Binder
Flat
Round
Round
Round
250303
280301
280308
280305
280307
.250
.281
.281
.281
.281
.065
.050
.093
.530
.050
-1.25
-.440
-.470
-.920
-.900
1.440
.703
.745
1.190
1.260
X
X
X
X
X
1.000
.937
.625
1.250
.760
Flat
Crowned
Flat
Binder
Crowned
KT 280317
KT 310102
KT 390885
KT 391000
KW 47536
.281
.312
.343
.394
.406
.100 -.870
.130 -.500
.055 -.510
.060 -.787
.115 -.565
1.310
.660
.752
1.110
.820
X
X
R
R
R
.600
.500
.630
.846
1.000
Crowned
Binder
Binder
Round
Round
Part No.
Hole
Size
Panel
Thickness
KT 125300
KT 156001
KT 120240
KW 47560
KT 190001-1
.125
.156
.187
.187
.187
.135
.035
.035
.030
.080
KT 190001
KW 47581
KT 200102
KT 200101
KT 234212*
.187
.187
.187
.203
.234
KT 220000
KT 250103*
KW 47516
KT 390630*
KW 47564
KT
KT
KT
KT
KT
Standard colour: Natural. Also available in black.
*Very popular for shelving and display construction.
**Grained surface.
42
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Christmas TreeTM Clips
SINGLE HEAD
Unique ribbed shank design ensures fast,
easy installation and secure holding in wide
range of materials. Can be designed to withstand almost any required removal force.
Several head and point styles available.
Installation: As clip is pushed into place
ribs deflect and then spring back after they
pass through hole. Works effectively in
prepared or blind holes.
Point
Style
Hole
Diameter
354-125300-00
354-156001-00
354-120240-00
354-190001-00
354-190001-01
Blunt
Blunt
Conical
Conical
Conical
.120 -.130
.151 -.161
.182 -.192
.182 -.192
182 -.192
354-190300-00
354-200102-00
354-200101-00
354-220000-00
354-250304-00
Round
Conical
Triangle
Conical
Round
.182
.185
.190
.223
.240
-.192
-.195
-.200
-.233
-.260
-.250
-.312
-.210
-.403
-.400
.
.180 -1.150
.100 -.600
.060 -.480
.140 -.750
.075 -.400
M39-0630-10
354-250103-00
354-070201-00
354-250105-00
354-250303-00
Conical
Mod. Triangle
Conical
Spec. Slotted
Conical
.240
.245
.245
.245
.245
-.260
-.255
-.255
-.255
-.255
.098 -.472
.095 -320
.040 -.750
.065 -.312
.065 -1.250
354-250302-00
354-280302-00
354-182740-00
EC 2811000
354-280307-00
Triangle
Triangle
Conical
—
Triangle
.247 -.257
.276 -.286
.276 -.286
.281
.276 -.286
354-280308-00
354-280317-00
354-280318-00
M36-0700-05
Triangle
Triangle
Triangle
Triangle
354-280305-00
Part No.
Panel
Thickness*
Head
Diameter A
.135
.035
.035
.065
.080
Head
Type
Head
Height B
Prong
Length C
.070
.080
.065
.065
.040
.298 -.318
.511 -.551
.432 -.452
.630 -.650
.550 -.570
.235
.360
.427
.427
.327
-.245
-.390
-.447
-.447
-.347
Flat
Flat
Flat
Flat
Flat
-.090
-.100
-.075
-.075
-.060
.432
.460
.745
.490
.613
-.442
-.480
-.755
-.510
-.623
Flat
Flat
Flat**
Truss
Flat
.065 -.075
.038 -.040
.065 -.075
.049 -.069
.115 -.135
1.375
.690
.690
.935
.384
.700
.740 -.760
.730 -.770 Sq.
1.032 -1.062
.990 -1.010
Flat
Flat
Flat
Flat
Flat
.100
.035 -.045
.050 -.060
.060 -.080
.050 -.070
.802
.430 -.550
1.050 -1.080
.520 -.540
1.430 -1.450
.110 -.370
.300 -.800
.250 -.800
.093
.050 -.900
1.240 -1.260
1.210 -1.230
.495 -.505
.625
.750 -.770
Flat
Flat
Flat
—
Crowned
.049 -.069
.085 -.095
.055 -.060
.110
.100 -.120
.429 -.451
1.100 -1.140
.940 -.950
.890
1.240 -1.280
.276 -.286
.276 -.286
.276 -.286
.276
.093 -.470
.100 -.870
.810 -1.580
.080 -.530
.610 -.630
.580 -.620
.580 -.620
1.00
Flat
Crowned
Crowned
Round
.035 -.045
.050 -.070
.050 -.070
.118
.730 -.760
1.300 -1.320
2.010 -2.030
.787
Conical
.281 -.291
.530 -.920
1.240 -1.260
Flat
.085 -.095
1.180 -1.220
354-310101-00
Blunt
.311 -.322
.093 -.400
Crowned
.075 -.105
.520 -.540
354-310102-00
Blunt
.312 -.322
.130 -.500
.370 -.390 x
.490 -.510
.490 -.510
Flat
.045 -.055
.650 -.670
Colours: Add suffix 0101 for natural nylon 6 or suffix 0075 for black.
-1.385
-.716
-.710
-.955
-.404
Continued
*Due to unique prong design, recommended panel thickness range can be exceeded in certain applications. Christmas Tree Clips don’t have to extend
beyond the panel and will hold securely in blind holes if the panel material is softer than the Christmas Tree Clip (i.e. wood, particle board, rigid foam, etc.).
**Grained surface.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
43
Christmas TreeTM Clips CONTINUED
DOUBLE END
Installation: One end of clip is pressed
into hole in primary panel. Assembly is
completed by pressing second panel onto projecting ribbed shank.
Prong A
Prong C
Part No.
Point
Style
Hole
Diameter
Panel
Thickness*
Prong
Length A
Head
Thick. B
Point
Style
Hole
Diameter
Panel
Thickness
Prong
Length C
354-201960-00
354-201960-01
XTC Double End
Round
Round
Conical
.312-.328
.312-.328
.150-.162
.125-.375
.105-.320
.105-.250
.440-.470
.326-.346
.293-.317
.025-.055
.035-.045
.063-.071
Round
Blunt
Conical
.312-.328
.312-.328
.150-.162
.140-.750
.105-.440
.105-.250
.840-.870
.448-.468
.293-.317
*Due to unique prong design, recommended panel thickness range can be exceeded in certain applications. Christmas Tree Clips don’t have to extend
beyond the panel and will hold securely in blind holes if the panel material is softer than the Christmas Tree Clip (i.e. wood, particle board, rigid foam, etc.).
Clip Fastener – Push On
This versatile 2-piece construction (screw and wing nut combination)
can be pushed on for fast assembly. This clip is extremely popular for sign
and display construction as it is removable and reusable.
Manufactured in either clear or black polycarbonate, it pushes into a
.187" hole and comes with a 7/8" long screw (3/4" grip capacity) with
9/16" O.D. round head screw and push-on/screw-off wing nut fastener.
Shelf Dart Clip
This white polypropylene clip fits most round, square or diamondshaped perforated shelf holes. Grips material up to 3/32" thick and
provides a secure hold. It is removable with a pinch and can be
reused.
It is designed for a .250" hole and has an overall length of .500"
with a head diameter of .375".
44
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Tree Clips
Part No.
A
B
C
D
KV 0734
.590
1.250
.270
.230
Part No.
A
B
C
D
KV 0983
.470
.100
.260
.470
Part No.
A
B
C
D
KV 1989
.750
.060
.290
1.070
Part No.
A
B
C
D
KV 1225
KV 2076
.975
.975
1.309
1.500
.267
.267
1.381
1.572
Part No.
A
B
C
D
KV 1176
.476
.210
.720
.030
Part No.
A
B
C
D
KV 1781
.625
.042
.375
.310
Continued
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
45
Tree Clips CONTINUED
Part No.
A
B
C
D
E
F
G
KV 1924*
.890
.161
.293
.072
.285
.995
1.080
*Available only in ST50 = 50% Nylon 6/6, 50% Super Tough.
Part No.
A
B
C
D
E
F
G
H
KV 1343
.500
.847
.810
.308
.766
.125
.250
.300
Part No.
A
B
C
D
E
F
G
H
I
KV 1678
KV 2063
.625
.625
.500
.500
.125
.125
.062
.062
1.000
1.000
.313
.313
.125
.110
.165
.150
.500
.500
Part No.
A
B
C
D
E
F
KV 1159
.340
.180
.225
.165
.220
.805
46
Continued
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Tree Clips CONTINUED
Part No.
A
B
C
D
E
KV 0931
.437
.420
.205
.170
.495
Part No.
A
B
C
D
E
KV 1216
.345
.560
.180
.250
.650
Part No.
A
B
C
D
E
.995
.065
.910
.267
.975
Part No.
A
B
C
D
E
KV 1860*
.700
.080
.400
.295
1.650
KT 250333
Continued
*Available only in ST50 = 50% Nylon 6/6, 50% Super Tough.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
47
Tree Clips CONTINUED
Part No.
A
B
C
D
E
KV 1981
.295
.015
.187
.100
.283
Part No.
A
B
C
D
KV 1843
.430
.041
.197
.502
48
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Hose Clamps
HOSERS (ACETAL TUBE AND HOSE CLAMPS)
Part No.
A non-metallic clamp that
will not rust, is non-conducting, not corroded by sea
water and is stable in a
wide variety of chemical
salts, bases, alcohols, oil,
grease, gasoline, etc. Often
used in place of stainless
clamps.
Can be applied by quick
ratchet closure, even after
hose is in place. A lateral
effort disengages the clamp.
A stand and a pneumatic
closing tool are aIso available.
Stocked in acetal. Black
heat- and UV-stabilized,
glass-filled nylon (for outdoor or under the hood
applications) also available
at an additional charge.
Diameter Range
Width
HO
HO
HO
HO
1
1.5
2
4
.228
.307
.351
.404
-.256
-.342
-.394
-.452
.148
.146
.231
.233
HO
HO
HO
HO
6
7
8
10
.449 -.511
.453 -.546
.513 -.586
.569 -.650
.233
.253
.231
.233
HO
HO
HO
HO
12
14
16
18
.616
.702
.746
.779
.234
.233
.232
.237
HO
HO
HO
HO
19
22
24
28
.859 -.989
.928 - 1.072
.985 - 1.135
1.123 - 1.296
.233
.234
.292
.288
HO
HO
HO
HO
32
34
36
38
1.218
1.338
1.472
1.594
-
1.405
1.566
1.724
1.862
.287
.292
.287
.291
HO
HO
HO
HO
42
50
60
70
1.729
1.999
2.259
2.536
-
2.021
2.277
2.582
2.881
.288
.291
.290
.288
HO
HO
HO
HO
76
80
90
100
2.839
3.144
3.506
3.871
-
3.206
3.562
3.922
4.395
.387
.388
.385
.394
-.707
-.801
-.848
-.899
Minimum order 100.
NYLON HOSE MATES™
Cords has a full line of nylon hose
clamps. They are quick, easy to install
and tighten instantly with hand pliers.
These lightweight clamps resist salt
water corrosion, weak acids, grease
and common solvents. Hose Mates™
can be removed without cutting, so
they are reuseable – both recyclable
and cost-effective!
Hose Mates™ are available in seventeen popular sizes, from a
minimum diameter of 1/4" up to a
maximum diameter of 2-3/8". Cords
stocks them in black and white nylon,
and they are also available in black
glass-filled nylon.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
49
Clamp Labkits
CABLE CLAMP LABKIT
LABKIT 5 is an assortment of cable clamps with approximately the following
quantities and part numbers. (Content may vary.)
25 each
20 each
15 each
12 each
10 each
8 each
6 each
3 each
1 each
HOSE CLAMP LABKIT
Our labkits are perfect for product design departments, experimental labs
and for all prototype work.
LABKIT 9 is an assortment of hose clamps with approximately the following
quantities and part numbers. (Content may vary.)
15 each
10 each
8 each
6 each
4 each
2 each
50
3352, 3304, 3305
3306, 3323
3307, 3374, 3325
3308, 3326
3328
3329, 3330
3382
3340, 3344
3377, 3348
HC344, HC750 GF
HC406, HC468 GF, HC531, HC593 HC875
HC953
HC672 GF
HC1031 GF
HC1250, HC1406
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Nylon Cable Clamps
Part No.
Black
White
Mounting
Hole Dia.
A
B
.170
1/8
3/16
1/4
5/16
3/8
7/16
1/2
.343
.378
.421
.441
.464
.500
.530
.203
1/8
3/16
1/4
5/16
3/8
7/16
1/2
.343
.378
.421
.441
.464
.500
.530
Light Duty–3/8" wide, .050" thick
3362
3363
3364
3365
3366
3367
3368
3312
3313
3314
3315
3316
3317
3318
3352
3353
3354
3355
3356
3357
3358
3302
3303
3304
3305
3306
3307
3308
Heavy Duty–1/2" wide, .060" thick
Cable clamps now also available in
narrower (5/32" wide) format as well as
wider (7/8") from 1/16" to 3/8" diameter.
3372
3373
3374
3375
3322
3323
3324
3325
1/8
3/16
1/4
5/16
.384
.410
.437
.474
3376
3377
3378
3379
3326
3327
3328
3329
3/8
7/16
1/2
9/16
.500
.533
.553
.603
3380
3381
3382
3383
3330
3331
3332
3333
5/8
11/16
3/4
13/16
.625
.665
.699
.765
3384
3390
3392
3393
3334
3340
3342
3343
7/8
1
1-1/8
1-3/16
.795
.825
.940
.963
3394
3396
3398
3344
3346
3348
1-1/4
1-3/8
1-1/2
.980
1.045
1.114
.203
Recognized under the Component Program
of Underwriters Laboratory File #E-54523
Conform to the following Mil spec: Mil Std 24E, Mil C-21565 (NAS), Mil P-17091-B
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
51
Adjustable Cable Clamps
These UL approved black nylon adjustable cable
clamps can accommodate various cables to save
you money.
They are adhesive-backed and are easy to
install, opening and closing for unlimited usage.
Part No.
A
ID Range
B
Length
C
Width
D
Height
E
Base
Thickness
F
Clamp
Width
Rated
Static Load
(lb.)
ACC
ACC
ACC
ACC
ACC
.311-.406
.394-.492
.496-.606
.650-.791
.827-.937
1.000
1.252
1.461
1.654
1.654
.752
.752
.752
1.000
.850
.874
1.094
1.252
1.453
1.689
.063
.063
.118
.118
.118
.402
.402
.500
.500
.445
3/4
1
1
1-1/2
1-3/8
375
437
562
750
938
Rated static loads apply for parts fastened to a flat, clean, dry surface and used within a temperature range of -30° to 65° C. We recommend clips be application-tested
before being specified for production runs.
Nylon Adhesive C Clamps
Exceptionally high performance clips
use an easy-to-install adhesive mounting system to speed assembly, improve
product appearance and to simplify wire
run installations in almost any location.
Convenient tabs allow for easy access
to wire.
Part No
K21-0188
021-0250
021-0375
021-0500
021-0750
021-1000
021-1500
A
.740
1.000
1.000
1.000
1.150
1.980
2.420
B
.620
.870
1.000
1.210
1.450
2.240
2.950
C
.080
.100
.090
.110
.125
.140
.150
Recommended installation and
storage temperatures are 15° to 27°C.
Available in 94V-0 Polypropylene
material for an additional charge.
Add -V0 suffix to part number when
ordering.
D
.335
.420
.500
.680
.990
1.370
1.770
Colour: Gray (UL94V-2)
Rated static loads apply for parts fastened to a flat, clean, dry surface
and used within a temperature range of -30° to 65° C. We recommend
clips be application-tested before being specified for production runs.
52
E
.390
.630
.630
.640
.640
1.260
1.310
Max.
Bundle
Dia.
Rated
Static
Load (lb)
3/16
1/4
3/8
1/2
3/4
1
1-1/2
1/2
3/4
1
1-1/4
1-3/4
4
6
Tolerance all dimensions: + .030.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Push Mount Clamps
Can be used in a wide variety of environmental conditions and on any surface
up to .080" thick. Just snap into a .250"
hole and the push-mount will hold a 25 lb.
continuous load and a 50 lb. impact load.
Unique lock/release feature operates
easily and locks securely.
Available in 94V-0 polypropylene for an
additional charge. Add-V0 suffix to part
number when ordering.
For use with chassis and panels .020"
to .080" thick.
Part No.
A
B
C
D
E
F
Max. Bundle
Diameter
029-0188
029-0250
029-0375
029-0500
029-0750
029-1000
.55
.58
.65
.77
.88
1.37
1.00
1.00
1.00
1.19
1.38
1.88
.39
.44
.53
.72
.97
1.30
.38
.41
.50
.60
.67
1.00
.20
.20
.20
.20
.20
.20
.30
.30
.30
.30
.30
.30
3/16
1/4
3/8
1/2
3/4
1
Need more solutions?
Check out Push-in Fasteners and Rivets
on pages 94–106
and our Wire Management section
on pages 202–208.
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
53
Nylon Quick Cable Clamps
Moulded of nylon 6/6, these quick cable clamps
are designed for one-handed installation. The
design features an integrated ratchet fastener which
eliminates the need for a screw or other fastener.
They are self-aligning and the built-in handle allows
for quick and easy installation without tools. Suitable
for many different wire, cable or tubing routing applications. Perfect for field jobs.
Designed to fit a 3/16" diameter hole.
A
C
B
Part No.
QCC
QCC
QCC
QCC
250
312
375
437
Bundle
Diameter
A
Knob Length
B
Width
C
Clip Length
1/4
5/16
3/8
7/16
.375
.375
.375
.375
.375
.375
.375
.375
.528
.528
.528
.528
Nail-In Cable Clips
H1
These nail-in cable clips are used to safely install
cable TV, fibre optics, computer networks, telephone and other communication systems, hydraulic
and pneumatic systems.They are moulded in tough,
ultra-violet resistant, electrically insulating, high density polyethylene. The main stress areas of the clip
have reinforcing ribs designed into the part to
strengthen and absorb impact. The contact edges
are radiused to protect damage to cable or tubing.
Pre-assembled with heat-treated, galvanized
steel nails, ready for use in masonry, wood, stucco
or plaster. Easily and efficiently installed.
H
W
Part No.
NICC
NICC
NICC
NICC
40
50
70
80
W
H
H1
.157
.100
.236
.315
.260
.299
.354
.453
.165
.209
.260
.339
Standard colour: Black or white (add suffix W when ordering).
54
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Polyacetal T-Clips
T-Clip
T-Clips provide a quick, adaptable and
inexpensive answer to securing, attaching
and routing of tubes, wires, hose and
pipe. They are not only easy to use, but
allow your installations to look extremely
neat and professional. T-Clips provide
uniform spacing to dual runs and can be
Part No.
TCLIP 4
TCLIP 6
TCLIP 8
TCLIP 10
TCLIP 12
TCLIP 15
TCLIP 18
TCLIP 22
Spacer
No.*
—
—
D8
D 10
D 12
D 15
D 18
D 22
TCLIP 6-8
mounted on walls, cabinets, boards,
enclosures and bulkheads. They are
available in a wide range of sizes to fit
almost any circular-sectioned item. A
countersunk centre hole is provided for
the fastener of your choice.
Many commercial applications, such as
Spacer
the installation of hydraulic hoses, electrical conduit and wires, telephone and fibre
optics, liquid and gas tubing and pipes,
and automotive hoses can benefit from
the ease of installation, safety and the
final look of the job.
Holding
Range
5/32 - 1/4
1/4 - 5/16
5/16 - 3/8
3/8 - 1/2
1/2 - 5/8
5/8 - 3/4
3/4 - 7/8
7/8 - 1
A
.60
.80
1.00
1.20
1.36
1.68
2.20
2.48
B
.40
.48
.60
.74
.82
1.04
1.24
1.56
C
.70
.80
.96
1.10
1.33
1.61
1.88
2.40
D
.24
.32
.40
.47
.56
.68
.78
.92
E
.28
.32
.40
.44
.46
.56
.64
.80
F
.12
.12
.16
.16
.17
.20
.22
.25
G
.25
.26
.32
.32
.36
.40
.44
.50
H
.36
.36
.48
.57
.64
.80
.92
1.10
1/4 - 5/16
1.37
1.00
.96
.28
.80
.160
.40
.47
1.36
.82
.876
.493
.460
.138
.17
.64
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
55
(one side)
X
5/16 - 3/8
(other side)
TCLIP12H
1/2 - 5/8
(Half Clip)
Standard Colour: Black.
A wide range of colours is available by special order.
*Spacers are available to fit T-Clips from numbers 8 to 22 to allow for additional spacing between the mounting face and the items to be
secured. As many spacers as necessary can be used to provide required clearance, as the design allows stacking.
Specifications:
Materials: Polyacetal engineered plastic with ultraviolet inhibitors.
Temperature Range: -40° to 212°F, -40° to 100° C.
Mounting: Screw mount standard.
56
Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1
Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: cords@cordscanada.com
Download