Hinges Locks Accessories Gaskets
advertisement
2012 2012 Locks Hinges , Inc. 6533 Hazeltine National Drive, Suite 3 Orlando, FL 32822 USA Accessories P: 407 - 601-5900 F : 407 - 601-5905 mail@fathinc.com www.fathinc.com Components Kft. H-2040 Budaörs, Gyár u. 2. Hungary P:+36 23 880-977 F:+36 23 880-978 info@fathkft.com www.fathkft.com Components Ltd. 6 Pegasus Court, North Lane Aldershot, Hampshire, GU12 4QP Machine Components (Shanghai) Co., Ltd. Building 2, No.2001 Shen Gang Road, Song Jiang, Shanghai, 201612 Great Britain China P:+44 1252 346610 F:+44 1252 330840 P:+86 21 5780 6395 F:+86 21 5774 4520 www.fathcomponents.com shanghai@fath.de GmbH Gewerbepark Hügelmühle 31 91174 Spalt Germany P:+49 (0) 9175 7909-200 F:+49 (0) 9175 7909-29 info@fath.de www.fath.de Gaskets December 2011 © FATH GmbH, D-91174 Spalt, Germany This catalog is copyright material and the proprietor reserves all rights. Re-print, even of parts, is only allowed with the expressed approval of FATH GmbH. We reserve the right to make technical modifications at any time. All indications are without guarantee. Drawings and models are the intellectual property of FATH GmbH. Table of Content Technical Information 4 Locks 7 Hinges 41 Accessories 69 Gaskets 83 Part Number Index 94 3 Technical Information Symbols Different versions supplied for left and right side installation For left and right hand installation Padlockable Attention Concealedhinge Detachable hinge Stainless steel Appropriate for devices accordant to IP65 / NEMA 4 External hinge Protection Categories according to IEC 60 539 The IP protection category is characterized by 2 digits. Example: IP 54 Second Degree of protection against water Digit First Degree of protection against Digit contact and foreign bodies 1 Protected against solid foreign objects of Ø 50 mm and greater 1 Protected against vertically falling water drops 2 Protected against solid foreign objects of Ø 12.5 mm and greater 2 Protected against vertically falling water drops when the enclosure is tilted up to 15° 3 Protected against solid foreign objects of Ø 2.5 mm and greater 3 Protected against splashing water 4 Protected against solid foreign objects of Ø 1.0 mm and greater 4 Protected against splashing water 5 Dust-protected 5 Protected against water jets 6 Dust-tight 6 Protected against powerful water jets 7 Protected against the effects of temporary immersion in water Protection Categories according to National Electric Manufacturers Association (NEMA) The UL classifications are not directly comparable with IP Protection Categories, since both the test conditions and the test results are different. UL / NEMA Description 1 Protected against penetration of foreign bodies 3.3R Protected against penetration of solid bodies, protected against the ingress of rain, and dust and damage caused by icing 3S Protected against rain, snow and foreign bodies. External mechanisms remain usable despite being coated in ice. 4.4X Protected against rain, foreign bodies, splashed water and hosed water, and against damage caused by icing on the exterior of the enclosure 12.12K Protected against dust deposits, foreign bodies, and non-corrosive dripping liquids 13 Protected against dust deposits, sprayed water, oil, and non-corrosive dripping liquids Stainless steel material specifications Germany 4 USA Japan Unified Numbering System Werkstoffnummer DIN AISI JIS UNS 1.4301 X5CrNi18-10 304 SUS 304 S 30400 1.4305 X8CrNiS18-9 303 SUS 303 S 30300 1.4310 X10CrNi18-8 301 SUS 301 S 30100 1.4401 X5CrNiMo17-12-2 316 SUS 316 S 31600 1.4571 X6CrNiMoTi17-12-2 316Ti SUS 316Ti S 31635 Explanation of the Terms: Left Hand Door, Right Hand Door, and Opening Direction LH Door Hinges are on the left side LH Door with swinghandle Opening direction is clockwise LH Door with escutcheon Opening direction is counter-clockwise RH Door Hinges are on the right side LH Door with swinghandle Opening direction is counter-clockwise LH Door with escutcheon Opening direction is clockwise 5 FATH Industrial Hardware Locks Content Locks – Table of Content Page 8 Swing Handle Page 25 Lever Latch Page 9 Rod Control Swing Handle Page 26 Lever Latch Page 10 Swing Handle Page 27 Lever Latch Page 11 Rod Control Swing Handle Page 28 Lever Latch Page 12 Swing Handle Page 29 Sliding Lock Page 13 Rod Control Swing Handle Page 30 Lever Latch Page 14 Swing Handle Page 31 Handle Lock Page 15 Rod Control Swing Handle Page 32 Handle Lock Page 16 Swing Handle Page 33 Quarter Turn Lock Page 17 Rod Control Swing Handle Page 34 Quarter Turn Lock Page 18 Rod Control Page 35 Quarter Turn Lock Page 19 Swing Handle Lock Page 36 Quarter Turn Lock Page 20 Swing Handle Lock Page 37 Quarter Turn Lock Page 21 Swing Handle Lock Page 38 Quarter Turn Compression Lock Page 22 Pushbutton Lock Page 39 Quarter Turn Compression Lock Page 23 Compression Latch Page 40 Push to close Latch Page 24 Compression Latch 7 FATH Industrial Hardware Locks Swing Handle Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces +1.5 Ts=1.5-0.5 GH=18 25 21.5 Alike FH 333 Round Cylinder 21.5 +0.5 50 0 44 50 158.5 91 Panel Cutout 50 50 +0.5 50 0 38 29 33.5 25 ŗ8 6 Ø1 O-ring IP protected SUS 304 clip 0 Ø14 Ø1 Ø4 29 Triangular 8mm Padlock device 3 16 Ø Double Bit 4mm Cylinder style with dust cap without dust cap Alike FH 333 round cylinder 0880001 0880005 Double bit 4 mm 0880002 0880006 Square 7 mm 0880003 0880007 Triangular 8 mm 0880004 0880008 Compatible cam see page 75 Compatible rod see page 78 Compatible rod latch see page 18 Compatible rod guides see page 80 8 Padlockable version on request Unique key version on request FATH Industrial Hardware Locks Rod Control Swing Handle Rod Control Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 3 7.8 6 4.5 135°=24mm 90°=16mm Ø6 14 LA2=124 33.5 +1.5 Ts=1.5-0.5 25 29 +0.5 50 0 12.5 50 50 22 Panel Cutout 91 158.5 50 +0.5 50 0 LA1=224 21.5 25 21.5 Alike FH 333 Round Cylinder Ø6 7.7 7.8 .5 7.8 7.8 7 Ø4 4.3 1.2 135°=24mm 90°=16mm 3 Round Studs 3.5 6 Square Studs Ø5 .2 Ø5.2 Hole O-ring IP protected ŗ8 Ø4 SUS 304 clip 29 Ø10 3 Ø14 6 Ø1 6 Ø1 Padlock device Double Bit 4mm Triangular 8mm Cylinder style with dust cap without dust cap Alike FH 333 round cylinder 0820011 0820015 Double bit 4 mm 0820012 0820016 Square 7 mm 0820013 0820017 Triangular 8 mm 0820014 0820018 Compatible cam see page 75 Padlockable version on request Unique key version on request 9 FATH Industrial Hardware Locks Swing Handle Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces +1.5 Ts=1.5-0.5 GH=18 25 44 +0.5 50 0 50 158.5 91 Panel Cutout 50 50 38 +0.5 50 0 29 33.5 21.5 25 21.5 0 SUS 304 clip 29 Ø14 Ø1 Padlock device O-ring IP protected ŕ 3 7 ŗ8 Ø4 6 Ø1 Double Bit 4mm Triangular 8mm Square 7mm Cylinder style with dust cap without dust cap For profile cylinder 0880009 0880013 Double Bit 4 mm 0880010 0880014 Square 7 mm 0880011 0880015 Triangular 8 mm 0880012 0880016 Compatible cam see page 75 Compatible rod see page 78 10 Padlockable version on request Unique key version on request FATH Industrial Hardware Locks Rod Control Swing Handle Rod Control Swing Handle Description Material Color Pack Quantity Ø6 135°=24mm 90°=16mm 6 7.8 4.5 3 For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 14 LA2=124 33.5 +1.5 Ts=1.5-0.5 25 29 +0.5 50 0 12.5 50 50 91 158.5 Panel Cutout 22 50 +0.5 50 0 LA1=224 21.5 25 21.5 Alike FH 333 Profile Round Cylinder Ø6 7 7.7 7.8 4.3 1.2 Square Studs 7.8 Round Studs .5 Ø4 135°=24mm 90°=16mm 3 3.5 6 7.8 O-ring IP protected Ø5 .2 Ø5.2 Hole SUS 304 clip Ø14 Ø10 Ø4 29 Padlock device ŗ 3 7 6 Ø1 ŕ 8 Double Bit 4mm Triangular 8mm Square 7mm Version B (P. rod control) Cylinder style with dust cap Version C (3p. rod Control) without dust cap with dust cap without dust cap For profile cylinder 0820035 0820039 0820043 0820047 Double Bit 4 mm 0820036 0820040 0820044 0820048 Square 7 mm 0820037 0820041 0820045 0820049 Triangular 8 mm 0820038 0820042 0820046 0820050 Compatible cam see page 75 Padlockable version on request Unique key version on request 11 FATH Industrial Hardware Locks Swing Handle Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 25 GH=18 34 38 +0.5 50 0 50 Panel Cutout 91 164 50 +0.5 50 0 25 25 24 Alike FH 333 Round Cylinder ŗ8 ŕ7 Ø4 Triangular 8mm Square 7mm Ø16 3 Double Bit 4mm Cylinder style with dust cap Alike FH 333 round cylinder 0880017 Double Bit 4 mm 0880018 Square 7 mm 0880019 Triangular 8 mm 0880020 Compatible cam see page 75 Compatible rod see page 78 Compatible rod latch see page 18 Compatible rod guides see page 80 12 Unique key version on request FATH Industrial Hardware Locks Rod Control Swing Handle Rod Control Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 1.2 14 7.7 90°=16mm 135°=24mm .05 4.5 Ø4 6 3 LA2=124 1.5 7.5 26 25 13.2 34 +0.5 50 0 50 Panel Cutout 164 50 +0.5 50 0 LA1=224 25 25 24 Ø6 7.7 7.8 1.5 6 3 Ø6 7.8 90°=16mm 135°=24mm 4.3 Round Studs 3.5 Square Studs 13 Ø5 .2 ŕ7 ŗ8 Ø4 Ø5.2 Hole Ø16 3 Double Bit 4mm Triangular 8mm Square 7mm Cylinder style with dust cap Alike FH 333 round cylinder 0820055 Double Bit 4 mm 0820056 Square 7 mm 0820057 Triangular 8 mm 0820058 Compatible cam see page 75 Unique key version on request 13 FATH Industrial Hardware Locks Swing Handle Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 34 25 GH=18 38 +0.5 50 0 50 Panel Cutout 164 91 50 +0.5 50 0 25 25 24 ŕ7 ŗ8 Ø4 Ø16 Cylinder style Part # DIN3Profile Cylinder 0880021 Compatible cam see page 75 Compatible rod see page 78 Compatible rod latch see page 18 Compatible rod guides see page 80 8mm Double Bit 4mm Triangular 14 Unique key version on request Square 7mm FATH Industrial Hardware Locks Rod Control Swing Handle Rod Control Swing Handle Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: PA; shaft and fixing parts: zinc plated MS Black 10 pieces 14 1.2 7.7 90°=16mm 135°=24mm 5 4.5 4.0 6 3 LA2=124 1.5 7.5 26 25 13.2 34 +0.5 50 0 50 Panel Cutout 164 91 50 +0.5 50 0 LA1=224 25 25 24 Ø6 7.7 7.8 1.5 13 90°=16mm 135°=24mm 4.3 6 3 Ø6 Ø5 .2 7.8 Round Studs 3.5 Square Studs Ø5.2 Hole ŕ7 ŗ8 Ø4 Cylinder style Ø16 0820067 DIN 1333 3 Compatible cam see page 75 Double Bit 4mm Part # Unique key version on request Triangular 8mm Square 7mm 15 FATH Industrial Hardware Locks Swing Handle Swing Handle Description Material Surface Pack Quantity 36 For an easy and secure latching and locking of doors and flaps Lock body: Die cast zinc; shaft and fixing parts: zinc plated MS Black powder coated or E-coated 10 pieces GH=18 45 50+0.5 -0 25 ŗ 50+0.5 -0 8 Panel Cutout 25 133 H 35 36 25 Ts=2±1 GH=18 Triangular insert 8mm H Panel Cutout 25 133 45 50+0.5 -0 25 .8 50+0.5 -0 8 ŗ 0 Ø1 25 Triangular insert 8mm 35 Ts=2±1 Cylinder style FH 333 round cylinder Triangle insert Compatible cam see page 75 Compatible rod see page 78 16 E-coated black powder coated padlockable 0880025 0880029 without padlock 0880026 0880030 padlockable 0880027 0880031 without padlock 0880028 0880032 Unique key version on request FATH Industrial Hardware Locks Rod Control Swing Handle Rod Control Swing Handle Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: Die cast zinc; shaft and fixing parts: zinc plated MS Black powder coated or E-coated 10 pieces 8 90°=16mm LA2=136.5 45 28 13.2 25 26 19 +0.5 50 -0 90° 36 0.8 Panel Cutout 25 Ø1 Ø1 5.5 15 +0.5 50 -0 LA1=211.5 25 7.7 Ø5 .2 6 7.8 8 Ø6 Square Studs 90°=16mm 3.5 Ts=2±1 1.2 Ø6 FH 333 round cylinder available Round Studs Cylinder style FH 333 round cylinder Triangle insert Compatible cam see page 75 Ø4.5 4.3 Ø4.0 5 Ø5.2 Hole E-coated black powder coated padlockable 0820083 0820087 without padlock 0820084 0820088 padlockable 0820085 0820089 without padlock 0820086 0820090 Unique key version on request 17 FATH Industrial Hardware Locks Rod Contol Rod Control Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Body: Die cast zinc; rod: MS zinc plated 10 pieces 3 4.5 6 4.5 3 90°=16mm 135°=24mm 7.5 Ø4.5 90°=16mm 135°=24mm 6 Ø4.5 14 7.5 14 1.5 LA2=136.5 LA2=124 1.5 27.3 Ø1 7 27.3 Ø17 38 54 38 54 ŕ8 25 ŕ8 22 50 22 .5 .5 Ø4 Ø4 5 5 LA1=211.5 LA1=224 1 3 50 +0.5 -0 3 4.3 Ø6 1.2 7 50 Ø6 1.2 13 90°=16mm 135°=24mm +0.5 50 0 90°=16mm 135°=24mm 13 4.3 25 25 1 25 7 50 Round Studs 50 50 +0.5 -0 Round Studs Square Studs 7.8 25 3.5 6 7.7 Ø5.2 Hole 7.8 7.8 7.7 Square Studs .2 Ø6 +0.5 50 0 Ø6 7.8 3.5 6 Ø5 Ø5 .2 Ø5.2 Hole For cutout:Version A Rivet style for cutout: version A for cutout: version B Round Studs 0820126 0820129 Square Studs 0820127 0820130 Ø 5.2 Hole 0820128 0820131 18 25 For cutout:Version B FATH Industrial Hardware Locks Swing Handle Lock Swing Handle Lock Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: Die cast zinc, black powder coated or PA, black ; shaft and fixing parts: zinc plated MS Black 10 pieces 25 25 25 150 50 34 150 160 50 50 50 30 Rubber sealing or EPDM foam sealing 25 H GH=18 45 Ts=1~3 36 22 25 11 Panel Cutout Swing Handle Lock PA body zinc die cast body Large Size, GH=18 mm 0880043 0880045 Compatible cam see page 75 Unique key version on request 36 Rubber sealing or EPDM foam sealing 22 10 Ts=1~3 110 14 45 120 30 25 30 H GH=20 25 Panel Cutout Swing Handle Lock PA Body zinc die cast body Small Size, GH=20 mm 0880041 0880042 Compatible cam see page 75 Unique key version on request 19 FATH Industrial Hardware Locks Swing Handle Lock Swing Handle Lock with Combination Lock Description Material Color Pack Quantity For an easy and secure latching and locking of doors and flaps Lock body: Die cast zinc, black powder coated or PA, black ; shaft and fixing parts: zinc plated MS Black 10 pieces Rubber sealing or EPDM foam sealing Panel Cutout Swing Handle Lock with Combination Lock PA Body Large Size, GH=18 mm 0880046 Compatible cam see page 75 20 Unique key version on request FATH Industrial Hardware Locks Swing Handle Lock Swing Handle Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Stainless steel Plain 10 pieces 32 21 13 2.5 Ø2 □8=M10 Ts=1.5～6 68 13 12.5 137 80 GH=18 11 22.5 9 Swing Handle Lock 81.6 .5 Panel Cutout 20 SS304 SS316 0880055 0880056 14 22.5 22.5 80 142 Rubber sealing 80 28 □8 36 Ø8 10 Swing Handle Lock 12 30 33 8.5 Ts=1.5～8 15 12 36 Panel Cutout SS304 SS316 0880057 0880058 21 FATH Industrial Hardware Locks Slam Latch with Pull Handle Slam Latch with Pull Handle 3 Ø51.5 5.1 3 16.2 35 27 5.5 33 20 Ø61 12 min=12 For an easy and secure latching and locking of doors and flaps Stainless steel 316 Plain 10 pieces 24 max=17 Description Material Surface Pack Quantity 1 12 Ø52 20 33 Ø61 5.5 5.1 3 Panel Cutout Panel thickness [mm] height of mounting bracket length of fixing screw locking version non-locking version 2–7 14 16 0810025 0810029 7 – 12 14 20 0810026 0810030 12 – 17 3.8 16 0810027 0810031 17 – 22 3.8 20 0810028 0810032 22 FATH Industrial Hardware Locks Compression Latch Compression Latch For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc; cam: zinc plated MS Black powder coated 10 pieces BH 34.5 24.5 H1 BH H2 4-R 3 85 Panel Cutout 8 18 21 21.5 72.5 Description Material Surface Pack Quantity 29.5 40 Non-locking H1 BH BH 34.5 24.5 H2 4-R 3 21.5 72.5 85 Panel Cutout 8 18 21 29.5 40 Key locking BH 34.5 24.5 H1 BH H2 4-R 3 21.5 72.5 85 Panel Cutout 8 18 21 29.5 40 Tooling-Secured Cylinder style Grip range pawl forward min – max [mm] Grip range pawl reversed min – max [mm] matte black powder coated bright chrome non-locking 6 – 16 56 – 66 0810039 0810048 16 – 26 46 – 56 0810040 0810010 26 – 36 36 – 46 0810041 0810011 6 – 16 56 – 66 0810042 0810012 16 – 26 46 – 56 0810043 0810049 26 – 36 36 – 46 0810044 0810050 6 – 16 56 – 66 0810045 0810051 16 – 26 46 – 56 0810046 0810052 26 – 36 36 – 46 0810047 0810053 key locking tool secured 23 FATH Industrial Hardware Locks Compression Latch Compression Latch For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc; cam: zinc plated MS Black powder coated 10 pieces Panel Cutout Description Material Surface Pack Quantity Panel Cutout Part # Large Size 0810054 Panel Cutout Compression Latch Panel Cutout Compression Latch Part # Small Size 0810055 24 FATH Industrial Hardware Locks Trigger Latch Trigger Latch Description Material Surface Pack Quantity 7 For an easy and secure latching and locking of doors and flaps Handle and housing and trigger: die cast zinc; screw: zinc plated MS Black powder coated 10 pieces 48.5 H=23～46 27.5 H=1～24 Trigger Ts=1～5 33.8 Non-locking 25 Ts=1～5 Short Arm 7 86 93 93 55 3 4-R Trigger Longer Arm Panel Cutout 48.5 H=23～46 27.5 H=1～24 Ts=1～5 33.8 Key locking Trigger Ts=1～5 Short Arm 86 93 93 55 3 4-R Trigger Longer Arm 25 Panel Cutout Grip range trigger style matte black powder coated bright chrome 6 – 24 non-locking raised trigger 0810056 0810060 non-locking flush trigger 0810057 0810061 (FH 751) Key locking 0810058 0810062 (FH 333) key locking 0810059 0810063 non-locking raised trigger 0810064 0810068 non-locking flush trigger 0810065 0810069 (FH 751) Key locking 0810066 0810070 (FH 333) key locking 0810067 0810071 13 – 46 Short arm Long arm 25 FATH Industrial Hardware Locks Trigger Latch Trigger Latch Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Handle, housing and button: Die cast zinc, black powder coated or PA, black ; screw: zinc plated MS Plain 10 pieces H=1～24 10 H=23~46 Trigger 30 Non-locking 76.5 82 82 55 10 Trigger 16.5 Ts=1~5 16.5 Ts=1～5 Short Arm Longer Arm 23.5 Panel Cutout Non-locking raised trigger grip range Part # Short arm 1 – 24 0810092 Long arm 23 – 46 0810093 26 FATH Industrial Hardware Locks Trigger Latch Trigger Latch Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Handle, housing and button: Die cast zinc, black powder coated or PA, black ; screw: zinc plated MS Black powder coated 10 pieces Panel Cutout Key Locking Lever Latch Non Locking key locking non locking 0810090 0810091 27 FATH Industrial Hardware Locks Trigger Latch Trigger Latch Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Handle, housing and button: Die cast zinc, black powder coated or PA, black ; screw: zinc plated MS Black powder coated 10 pieces 15 110 E=64 H=45～57 E=52 H=29～45 E=36 H=14～29 8 E=21 H=1～14 H 0 35-0.5 Ts=1～11 0 90-0.5 15 110 8 4R 3 85 50 50 Key Locking Non Locking 22 25 27.5 Panel Cutout Panel thickness [mm] grip range min – max [mm] E [mm] non locking FH 751 key locking 1 – 11 1 – 14 29 0810072 0810076 14 – 29 44 0810073 0810077 28 29 – 45 60 0810074 0810088 45 – 57 72 0810075 0810089 FATH Industrial Hardware Locks Slide Latch Slide Latch Description Material Color Pack Quantity 15 25.5 28 44 38.5 2 To lock panels and doors PA Black 10 pieces 6.7 22 Slide Latch Part# 0810094 Description Material Color Pack Quantity Slide Latch To lock panels and doors Body: ABS; spring: stainless steel Black 10 pieces for 0.8 – 1.2 thickness for 1.2 – 1.5 thickness 089201 089202 29 FATH Industrial Hardware Locks Over Center Latch Over Center Latch Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Die cast zinc Black powder coated or chrome plated 10 pieces 24 16 3.2 6- Panel Cutout 20 32 16 .2 Ø3 16.8 20.5 3.2 4-Ø 12 12 76 35.5 35.5 12 2-Ø 21 12 3.2 17.5 12 12 64.5 30 30 6-Ø Ø3 .2 12 26.5 17.5 6- 16.5 12 Panel Cutout Surface Size Key locking Non locking Black powder coated big 0810095 0810099 small 0810096 0810100 big 0810097 0810101 small 0810098 0810102 Satin chrome 30 FATH Industrial Hardware Locks Handle Lock Handle Lock For an easy and secure latching and locking of doors and flaps Housing and handle: Die cast zinc or SS304; cam: zinc plated MS Black powder coated / Chrome plated / Plain 10 pieces 45 45 20.7 20.7 37 90° 14 23 Key Locking H GH=18 32 78 78 27 19 Description Material Surface Pack Quantity Ts=1~8 90° 14 23 Ø2 Non Locking 2. + 5 0. 0 1 +0.2 20+0.1 Panel Cutout Surface Key locking Non locking Black powder coated 0810103 0810104 Bright chrome 0810105 0810106 SS 304 – 0210107 Compatible cam see page 75 Unique key version on request 31 FATH Industrial Hardware Locks Handle Lock Handle Lock Description Material Surface Pack Quantity 2 Ø3 6 2-Ø 20.7 R1 45 1 9.7 4 36.3 Ø2 2. + 5 0. 0 1 6 36 19 2.5 For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc or stainless steel; cam: zinc plated MS Black powder coated / bright chrome or plain 10 pieces +0.2 20+0.1 Ts=1~8 90° GH=18 105 6.7 Panel Cutout 22 15 13.8 Surface Key locking Non locking Black powder coated 0810112 0810113 Bright chrome 0810114 0810115 SS 304 – 0210116 Compatible cam see page 75 45±2 Ø2 36 2. + 5 0. 0 1 19 Ø22.5 GH=18 Ø29 90° +0.2 20+0.1 Ts=1~5 Panel Cutout 105 H R4 15 15 Handle Lock Compatible cam see page 75 32 7 black powder coated bright chrome 0810117 0810118 FATH Industrial Hardware Locks Quarter Turn Lock Quarter Turn Lock Material Zinc or stainless steel 19 37.5 39.5 Double Bit 4mm Triangular 8mm Square 8mm 8 7 Ø5 29 Alike FH 333 Cylinder 8 8 Ts=1~5 Square 7mm r Ø4 GH=18 Triangular 7mm M22 19.5 4 Square 7mm with slot Square 8mm with slot Arc knob Wingknob 10 8 8 45 Double Bit 5mm Ø2 Ts=1~8 20 Double Bit 3mm 29 4 Ø9 Ø4 3 7 7 Ø8 3 or 4 .9 Ø Ø2 16 8 r Ø3 10 45±2 H 13 GH=20 Female Square 8mm 19 Ø2 5 Hexagon female 8mm with pin 3mm 8 2. + 5 0. 0 1 Hexagon male 10mm H 38 8 Ø4 4 2x Panel Cutout 2x4 Slot +0.2 20+0.1 Hexagon female 8mm Star knob Insert type Die cast zinc, bright chrome die cast zinc, black powder coated Alike FH 333 0810123 0810141 Double bit 3 mm 0810124 0810142 SS 304 0810159 Double bit 4 mm 0810125 0810143 0810160 Double bit 5 mm 0810126 0810144 0810161 2 x 4 slot 0810127 0810145 Triangular 7 mm 0810128 0810146 0810162 0810163 Triangular 8 mm 0810129 0810147 Square 7 mm 0810130 0810148 0810164 Square 8 mm 0810131 0810149 0810165 Square 7 mm with slot 0810132 0810150 Square 8 mm with slot 0810133 0810151 Female square 7 mm 0810134 0810152 Female hexagon 8 mm 0810135 0810153 Female hex 8 mm with 3 mm pin 0810136 0810154 Male hexagon 10 mm 0810137 0810155 Wingknob 0810138 0810156 Arc knob 0810139 0810157 Star knob 0810140 0810158 Compatible cam see page 75 33 FATH Industrial Hardware Locks Quarter Turn Lock Quarter Turn Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc; cam: zinc plated MS Black powder coated / bright chrome 10 pieces 31.8 50 45 49.5 Ts=1~6 GH=18 H Ø2 2. + 5 0. 0 1 Key locking Non locking +0.2 20+0.1 Panel Cutout Surface Key locking Non locking Black powder coated 0810168 0810169 Bright chrome 0810166 0810167 H=14 13 21 24 24 13 32 13 GH=12.8 Ø23 Key locking Ø23 Ts=1~6 6 Ø1 Non locking 14.2 Panel Cutout Surface Key locking Non locking Black powder coated 0810176 0810177 Bright chrome 0810174 0810175 34 FATH Industrial Hardware Locks Quarter Turn Lock Quarter Turn Lock Ts=1~8 Ø1 9.5 For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc; cam: zinc plated MS Bright chrome 10 pieces Ø16 4 M19 Ø24 Description Material Surface Pack Quantity 45 4.5 GH=20 16.5 Panel Cutout 19 Quarter Turn Lock Part # 0810178 Compatible cam see page 75 Panel Cutout Quarter Turn Lock Part # 0810187 35 FATH Industrial Hardware Locks Quarter Turn Lock Quarter Turn Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Body: die cast zinc; cam: zinc plated MS Bright chrome 10 pieces 12 3 30 17 Ø1 6. 5 1.5 □ 12 17 29.5 27.5 GH=12.7 Ts=1～4 □14.5 Panel Cutout 25 Quarter Turn Lock Part # 0810190 36 FATH Industrial Hardware Locks Quarter Turn Lock Quarter Turn Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Handle and housing: die cast zinc; cam: zinc plated MS Black powder coated / bright chrome 10 pieces 17 H 13.5 Ø2 45 2. + 5 0. 0 1 1 Ø3 3 +0.2 20+0.1 GH=15 5 Knob Style Panel Cutout 4 Ø1 13 Ø14 r8 R1 8 Square 8mm Slot 2*13mm Triangular 8mm 4 Ø1 14,3 Ø14 Ø5 Ø1 1 r7 7 Double Bit 5mm Square 7mm Triangular 7mm Operation Part # Knob style 0810192 Slot 0810193 Double bit 5 mm 0810194 Triangular 7 mm 0810195 Triangular 8 mm 0810196 Square 7 mm 0810197 Square 8 mm 0810198 Compatible cams on request 37 FATH Industrial Hardware Locks Quarter Turn Compression Lock Quarter Turn Compression Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Housing and cylinder: die cast zinc; cam: zinc plated MS Black powder coated 10 pieces +1 11-0 +0.1 4.7 -0 0 10 -1 29.5 23 14 14 14 0.8 Ø2 3.5 BH 3 Ø2 Ø2 1.7 BH 3 0.8 0.8 Ø2 7.3 14 14 0.8 23 BH 5mm BH Ts=1~10 43 .1 Ø6 H=GRIP 6 H=GRIP H=GRIP H=GRIP H=GRIP H=GRIP 25 4.3 Slotted recess Tool-operated Key operated Knob style 41.5 7.5 2.1 1.2 50 Ø27 21.5 6 6 11.5 10 13.5 Ø1 Key for key operated style. Ø1 46 6 +0 -0 .2 21 13.5 Panel Cutout Grip range [mm] slotted recess tool operated knob style key operated 3.2 – 6.4 0810203 0810211 0810219 0810227 6.4 – 9.5 0810204 0810212 0810220 0810228 9.5 – 12.7 0810205 0810213 0810221 0810229 12.7 – 15.9 0810206 0810214 0810222 0810230 15.9 – 19 0810207 0810215 0810223 0810231 19 – 22.2 0810208 0810216 0810224 0810232 22.2 – 25.4 0810209 0810217 0810225 0810233 25.4 – 28.6 0810210 0810218 0810226 0810234 38 FATH Industrial Hardware Locks Quarter Turn Compression Lock Quarter Turn Compression Lock Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Housing and cylinder: die cast zinc; cam: zinc plated MS Black powder coated 10 pieces 37 Ø28.5 Ø26 6.4 22 5 5.5 7 Square 7mm Knob style 64 8 32.5 31 Ts=1~18 25 Key operated m Ø4 7mm Square 8mm 5 m M10 Hex female 8mm Double bit 4mm 7 r 5 10 33 Slotted recess Triangle 7mm r 19.5 8 5 2. Ø2 Triangle 8mm Hex.male10mm 50.8 Panel Cutout 22.5 14 5 20 Ø2 2 +0 -0 .1 1.2 9.5 3.5 4.2 2.7 7.5 Cam style grip range [mm] key operated double bit 4 mm triangle 7 mm triangle 8 mm square 7 mm slotted recess fem. hex 8 mm male hex 10 mm knob style reversed 11.4 – 27.2 0810237 0810240 0810243 0810355 0810358 0810361 0810364 0810367 0810370 25.4 – 41.1 0810238 0810241 0810244 0810356 0810359 0810362 0810365 0810368 0810371 straight 38.9 – 54.6 0810239 0810242 0810245 0810357 0810360 0810363 0810366 0810369 0810372 offset 52.6 – 68.3 0810238 0810241 0810244 0810356 0810359 0810362 0810365 0810368 0810371 66.3 – 76.2 0810237 0810240 0810243 0810355 0810358 0810361 0810364 0810367 0810370 39 FATH Industrial Hardware Locks Push to close Latch Push to close Latch Description Material Surface Pack Quantity For an easy and secure latching and locking of doors and flaps Die cast zinc Bright chrome 10 pieces Ø29 22.5 17 9 16.8 42 25 17 5 19 5 5. Ø2 24 Panel Cutout 1.6 Ø24 13.5 19 8 Mounting keeper Push to close Latch Part # 20.7 4.7 9. 6.2 1 +0 -0 .1 0810235 13.5 Ø1 2 Ø2 13.5 16.5 30 Ts=1~8 Push to close Latch Panel Cutout Part # 0810236 40 FATH Industrial Hardware Hinges Content Hinges – Table of Content Page 42 Screw-on Hinge Page 56 External Hinge Page 43 Screw-on Hinge Page 57 External Hinge Page 44 Screw-on Hinge Page 58 External Hinge Page 45 Screw-on Hinge Page 59 External Hinge Page 46 Lift-off Hinge Page 60 External Hinge Page 47 Lift-off Hinge Page 61 External Hinge Page 48 Lift-off Hinge Page 62 Concealed Hinge Page 49 Lift-off Hinge Page 63 Concealed Hinge Page 50 Lift-off Hinge Page 64 Concealed Hinge Page 51 Lift-off Hinge Page 65 Concealed Hinge Page 52 Lift-off Hinge Page 66 Concealed Hinge Page 53 Lift-off Hinge Page 67 Concealed Hinge Page 54 External Hinge Page 68 Concealed Hinge Page 55 External Hinge 41 FATH Industrial Hardware Hinges Screw-on Hinge Screw-on Hinge Description Material Surface Pack Quantity To hinge panels or profiles Die cast zinc; Pins: zinc plated MS or SS Black powder coated or chrome plated 10 pieces 9 40 12.5 180° 5 Ø5 90° 12.5 .3 .3 Ø9 25 12 25 40 4-M5 12.5 40 12.5 180° 40 5 9 Surface countersunk screw M5 with threaded studs M5 Matte black powder coated 095005 0830113 Bright chrome 095005S02 0830114 SS 316 09574040E – 42 FATH Industrial Hardware Hinges Screw-on Hinge Screw-on Hinge Description Material Surface Pack Quantity To hinge panels or profiles Die cast zinc; Pins: zinc plated MS or SS Black powder coated or chrome plated 10 pieces 50 15 6 Ø6 90° 180° 15 .3 .5 Ø12 30 50 30 50 12 4-M6 15 50 15 180° 11.5 6 11.5 Surface countersunk screw M6 with threaded studs M6 Matte black powder coated 095006 0830115 Bright chrome 095006S02 0830116 SS 316 09575050E – 43 FATH Industrial Hardware Hinges Screw-on Hinge Screw-on Hinge Description Material Surface Pack Quantity To hinge panels or profiles Die cast zinc; Pins: zinc plated MS or SS Black powder coated or chrome plated 10 pieces 60 18 180° 8 Ø8 90° 18 .4 .5 Ø16 36 15 4-M8 18 60 18 180° 60 36 60 8 15 14 Surface countersunk screw M8 with threaded studs M8 Matte black powder coated 095009 0830117 Bright chrome 095009S01 0830118 SS 316 09576060E – 44 FATH Industrial Hardware Hinges Screw-on Hinge Screw-on Hinge Description Material Color Pack Quantity To hinge panels or profiles PA Black 10 pieces 31.5 Adjustment screw 12.5 7.5 12.5 4- Ø4 . 4 43 31.5 36.5 12.5 270° 6.5 12.7 12 6 31.5 12.5 Panel cutout Screw-on Hinge Part # 0830015 45 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pins: zinc plated MS or SS Black powder coated 10 pieces 50 50 17.5 17.5 17.5 R 17.5 64 50.5 64 50.5 Left Right R 2.5 32.5 32.5 10 10 46 11 10 17 14 17 14 10 11 4-M5 4-M5 Screw-on Hinge 2.5 left version right version 0830012 0830013 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc Black powder coated / black powder coated or chrome plated 10 pieces 11 11 4.6 4.6 4-Ø 5 4-Ø 5 3 3 9.5 9.5 25.5 25.5 4 4-M 4-M 4 10 10 20 20 4.7 4.7 10 10 0.8 0.8 Right Left Surface left version right version black powder coated 0830016 0830017 17.5 17.5 19 19 M 4- 51 63 63 51 4M 5 5 32.5 32.5 10 15 180° Left 17.5 17.5 10 180° 15 15 15 Right Surface left version right version matte black powder coated 0830018 0830019 textured black powder coated 0830020 0830021 bright chrome 0830022 0830023 satin chrome 0830024 0830025 47 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc Black powder coated or chrome plated 10 pieces 17.5 19 12.4 15 17.5 10 15 4 -M 5 10 19 180° 62 Version A 15 5.3 2-Ø 17.5 10 19 12.75 19 17.5 10 11.3 15 2-M 5 2-Ø9.2 6.35 63 Version B Surface version A version B matte black powder coated 0830026 0830027 bright chrome 0830030 0830031 95 18.5 4- Ø5 9.9 15 .3 5.7 25.5 38.5 19 10 Surface front mounting concealed mounting black powder coated 0830034 0830035 48 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc Black powder coated or chrome plated 10 pieces 16 12 4- M 6 10 10 180° 18 12 18 60 10 12 4- M 6 16 10 29 11 29 80 Surface L [mm] Part # matte black powder coated 60 0830036 80 0830037 60 0830038 80 0830039 60 0830040 80 0830041 bright chrome satin chrome 60 18 12 18 7 R5 4-M 5 11 180° 10 90 25 19.5 10.5 25 R7 4-M 8 14.5 180° 14 Lift-off Hinge L [mm] Part # 60 0830044 90 0830045 49 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge To hinge panels Die cast zinc; Cover: SS Plain 10 pieces 180° Description Material Surface Pack Quantity 55 27 9 27 8 R5. 8.2 7.5 6 15 15 6 180° 5 2-M 47 47 9 2-Ø 5.4 4-M5 8 30 95 Lift-off Hinge Description Material Surface Pack Quantity 7.5 L [mm] Part # 55 0830042 95 0830043 .5 7.1 16 R6 5 4-M 16 R5. To hinge panels or profiles Die cast zinc; pin: zinc plated MS or SS Chrome plated 10 pieces 61.1 16 7 30 10.3 7 13 Screw-on Hinge Part # 0830046 50 FATH Industrial Hardware Hinges Lift-off Hinge Lift-off Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc Black powder coated or chrome plated 10 pieces 4-M 5 5.5 23 7.5 29 25 R6 5 30 180° 44.5 30 90.5 12 Surface Part # Matte black powder coated 0830047 Bright chrome 0830048 51 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity 13 13 39 12.5 To hinge panels Zinc plated steel or stainless steel Plain 10 pieces 12 7.5 1 10 23 13 21 30 1 6 28.2 12 40.2 180° 45 20 5 6 Version stainless steel steel three joints 0830049 0830050 52 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Zinc plated steel or stainless steel Plain 10 pieces Ts=2 7.5 7.5 180° M6 10 15 Ø6 13.5 2× 45° > 20 14 25.6 M6 13.6 ¨12 180° 13.5 7.5 15 Ts=2 7.5 2× 45° 10 M6 > 20 14 39.2 27.2 ¨12 Version M6 L [mm] stainless steel steel two joints 25.6 0830051 0830053 three joints 39.2 0830052 0830054 M8 18 10 180° 14 20 Ts=2 > 20 10 2× 45° Ø8 14 32.5 16.5 ¨16 M8 ¨16 Version Ts=2 18 10 M8 10 180° 14 14 20 Ø8 2 × 45° > 20 22 22 16.5 33 49 M8 L [mm] stainless steel steel two joints 32.5 0830055 0830057 three joints 49.0 0830056 0830058 53 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pin: zinc plated MS or SS Black powder coated or chrome plated 10 pieces 16 12.3 4.6 180° 12 1.5 17.7 20 20 Ts=1.5 18.3 22.5 Ø6 4.6 1.7 30 13 ≤17 Door Panel thickness Ts [mm] matte black powder coated bright chrome 1.5 0830059 0830061 2.0 0830060 0830062 38 10 6.2 2 25 42 16.5 13 4.6 10 25 2-Ø12 2-Ø 32.4 Ø6 2-Ø6.2 20 4.6 27 24.5 TS=1.5 23 ≤22 14 43 25 1.5 1.8 Door Panel thickness Ts [mm] matte black powder coated bright chrome 1.5 0830063 0830065 2.0 0830064 0830066 54 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pins: zinc plated MS or SS Black powder coated or chrome plated 10 pieces 12.3 16.5 2 40 62 37.8 2.7 3.5 36 4.3 8.3 40.5 1 27 R1 Ts=1.5~4 41 10 34 Ø8 34 17 Doorframe ≥2 8.3 17.7 36 65 ≤30 52 38.5 26 27 .5 2 70 Door External Hinge matte black powder coated bright chrome 0830167 0830067 55 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pin: zinc plated MS or SS Black powder coated 10 pieces 19 25 13 5 8.5 R6 21.5 11 180° 2-M10 16 5 >4 2-Ø11.5 Ø6.3 2-Ø6.3 25 22.5 50 35 External Hinge left version right version 0830169 0830069 Panel cutout External Hinge Part # 0830071 56 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pins: zinc plated MS or SS Blue zinc plated 10 pieces 16.5 10.6 4 Ø8 20 11.5 Ø4.4 11.5 20 48 180° 17.5 14.5 6.6 18 Ø8 22 19 26 Ø3 External Hinge Part # 0830074 To hinge panels or profiles Die cast zinc; Pins: zinc plated MS or SS Black zinc plated 10 pieces Ø5 21 4 15 Ø8 15 23 27.5 3-Ø6 3-Ø11.5 31 27 25 48 External Hinge 25.5 22.5 11 Description Material Surface Pack Quantity 12 180° 12 19 Part # 0830076 57 FATH Industrial Hardware Hinges External Hinge External Hinge To hinge panels Die cast zinc; Pin: PA Black powder coated / black powder coated or chrome plated 10 pieces 60 Ø6.4 25 50 6 50.5 7.5 >33 12.4 10 14 19.5 6 >4 25 2-M 40 32.5 25.4 Description Material Surface Pack Quantity 2 14 External Hinge < 20 < 24 Part # 0830075 20 63 48.5 10.5 R6 6 ＞10 10 12 4-M 180° External Hinge 58 matte black powder coated bright chrome 0830177 0830077 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pins: zinc plated MS or SS Black powder coated or chrome plated 10 pieces R7 11.8 14 15 32 45 11.8 14 6 M 3- 180° 16 21.5 13 43 63 20 13 16 >6 M8 3- matte black powder coated bright chrome 45 0830090 0830092 63 0830091 0830093 10 3-M 83 13.5 180° 21.5 13.5 41 20 21 10 2-M 21 20 43 63 21 20 21 L [mm] 10 4-M 16 L [mm] matte black powder coated bright chrome 41 0830094 0830097 63 0830095 0830098 83 0830096 0830099 59 FATH Industrial Hardware Hinges External Hinge External Hinge To hinge panels Die cast zinc; Pin: PA Black powder coated or chrome plated 10 pieces 16 36 2-M8 Description Material Surface Pack Quantity 47 60 24 14 22 M8 180° 2- 22 14 >6 35.5 4-M 8 48 60 15 23.5 15 24 18 180° 18 4- 35.5 M 8 48 15 20 30 20 180° 23.5 60 20 W [mm] matte black powder coated bright chrome 14 0830100 0830103 15 0830101 0830104 20 0830102 0830105 60 FATH Industrial Hardware Hinges External Hinge External Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pins: zinc plated MS or SS Black powder coated / black powder coated or chrome plated 10 pieces 24 3 Ø6 12 2-Ø5.2 3.8 14 62 Ø7×90° 2-Ø4.2 14 Ø10×90° 42 92 9 9 64 14 3 4-Ø4.2 3.8 70 12 24 Ø8.5×90° 3-Ø5.2 21 21 14 Ø10×90° L [mm] matte black powder coated bright chrome 62 0830109 0830111 92 0830110 0830112 61 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels Die cast zinc; Pin: zinc plated MS or SS Black powder coated 10 pieces 48 25 17 2 2-Ø4.5 2-Ø7.5 27.1 13.5 2 9.5 ≥5 External Hinge 19.8 Part # 0840011 62 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels MS Zinc plated 10 pieces 9.5 62 45 .2 .1 .1 R5 20 R5 20 Ø6 2 Ø6 2 14.5 15 62 Ø5 14.5 2- 9.5 Large size Screw on version Weld on version 10 .5 R3 13.5 Ø4 Ø4 R3 1.5 .5 1.5 2-Ø 3.6 10 5 32 19 32 8 8 Small size 13.5 Screw on version Weld on version Size screw-on version weld-on version large size 0840013 0840015 small size 0840014 0840016 63 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels MS Zinc plated 10 pieces 19.9 5.8 21.8 12.8 Ø8 9.2 11.8 2- 3 2. Ø1 65 3 2Ø6 .2 18.5 23.5 25 90 External Hinge Part # 0840012 >5 Ø9 25 2 .2 M5 15 19.5 15 8.6 5 Ø5 15 12 22.8 70 135° External Hinge Part # 0840017 64 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels Zinc plated MS or SS Plain 10 pieces >2.5 14.8 60 20 36 22.5 7.4 2 12.2 20 Screw on version Weld on version Material screw-on version weld-on version SS 304 0840038 0840039 Steel 0840040 0840041 (Dim 20.3) 2- .5× 67 53 90 ° 20.3 .4 5 -Ø 2.5 Ø9 120° 2 17 8 11.3 20.3 4 Ø5 0 17 -1 3 36 60 (Dim 21.5) 2-Ø5.4 80 135° 66 6.5 2-Ø 20.5 3 Ø5 9.5 2-Ø 36 53 60 2.5 11.5 8 9.5 21.5 2-Ø >6.5 67 M.S. zinc plated or Stainless steel Material Dim 20.3 Dim 21.5 SS 304 0840023 0840024 Steel 0840025 0840026 65 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels Zinc plated MS or SS Plain 10 pieces ×1 20 6.5 2 >0.5 .5 120° Ø6 2- 60 42 26 3 20.4 32.5 14.5 2.5 Ø5 >3 16 36 60 120° 12 24.5 6.3 5× 6. 2- 60 42 14.5 2.5 38.5 32.5 3 26.5 Ø5 36 60 16 >3 Material Dim 20.0 Dim 20.3 SS 304 0840019 0840020 Steel 0840021 0840022 2- 6. 5× 12 6.5 80 66 60 42 135° 2.5 3 6.5 2-Ø .5 32.5 26 Ø9 21 32.5 20.4 2- Ø5 36 60 2- 6. 5× 12 >3 20 135° 6.3 80 66 60 42 24.5 3 14.5 6.5 2-Ø Ø5 36 60 38.5 32.5 .5 21 Ø9 32.5 26.5 2- 2.5 >3 Material Dim 20.0 Dim 24.5 SS 304 0840027 0840028 Steel 0840029 0840030 66 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels Zinc plated MS or SS Plain 10 pieces Ø6 23 2.7 6.2 11.4 50.5 108 25 90 6.3 9.1 23 Ø11 10 12 >4 2.1 2 6. 33 6 1. Ø 2.75 2 Ø1 3 Concealed Hinge 6 28 SS 304 steel 0840031 0840032 Ø6 10 12 3 4 1.2 6 18 21 2×1.5 1.2 90 96 23 120° 2 Ø6.2 1 Ø1 40 50 25 2.75 4 Pins Concealed Hinge SS 304 steel 0840050 0840051 67 FATH Industrial Hardware Hinges Concealed Hinge Concealed Hinge Description Material Surface Pack Quantity To hinge panels Zinc plated MS or SS Plain 10 pieces 126 100.4 .4 Ø9 2 5.2 7 4- 9.7 5.2 5 Ø5 .4 29.0 19 13.8 12 23.5 24 34 48 H=17/20/23.4 116 1.5 SS 304 steel 17.0 0840033 0840035 20.0 0840003 0840036 23.4 0840034 0840037 40 50 60 80 H [mm] Ø8 Ø10 Ø12 Ø16 L [mm] SS 304 steel 40.0 0840042 0840043 50.0 0840044 0840045 60.0 0840046 0840046 80.0 0840048 0840049 68 FATH Industrial Hardware Accessories Content Acessories – Table of Content Page 70 Pocket Pull Page 76 Keys Page 71 Flush Pull Page 77 Nut Page 72 Cover Stay Page 78 Rods Page 73 Telescopic Cover Stay Page 79 Rod Accessories Page 74 Cover Stay Page 80 Rod Guides Page 75 Cams Page 81 Accessories for Locks 69 FATH Industrial Hardware Grips and Handles Pocket Pull Pocket Pull Description Material Color Pack Quantity To insert in panels PA6 GF30 Black 10 pieces X 39 57.5 3.5 Ts=1~3 Y 4 .8 49 94 110 Panel cutout Ts [mm] X [mm] Y [mm] 1.5 – 2.0 49.8 +0.2 99.5 2.0 – 3.0 50.0 +0.3 99.5 Ts=0.7~2 X 41.5 29.2 2.5 Y 3.5 .8 34 81 94 Panel cutout Pocket Pull 70 Ts [mm] X [mm] Y [mm] 1.5 – 2.0 35.0 +0.2 85.0 +0.3 2.0 – 3.0 36.0 +0.3 85.0 +0.3 small size large size 0890009 0890008 FATH Industrial Hardware Grips and Handles Flush Pull Flush Pull Description Material Color Pack Quantity To insert in panels Pull and cup: ABS plastic; Screws: Steel, black zinc plated Black 10 pieces 25.5 (1.00) 121.5 (4.78) Pull 64.3 (2.53) 22.7 (.89) 46.7 (1.84) 2.5 (.09) Cup 91.5 (3.60) 23 (.90) 123 (4.84) Door thickness (see table) Two No. 6 BT thread forming screws (supplied) 114.30±0.25 (4.500±.010) 38±0.2 (1.500±.005) 0.7 (.03) R Max. Door thickness range [mm] flammability rate UL94-HB flammability rate UL94-VO 1.0 – 1.8 0890142 0890146 1.8 – 3.3 0890143 0890147 3.3 – 4.8 0890144 0890148 4.8 – 6.3 0890145 0890149 71 FATH Industrial Hardware Cover Stays Cover Stay Cover Stay Description Material Surface Pack Quantity To hold open flaps and doors Zinc plated MS or SS Plain 10 pieces 290 4-Ø4.6 22 36 16 6 9 21 1 9 6 13 Left opening 4-Ø4.6 36 22 16 290 6 9 21 1 9 6 13 Right opening Version nickel plated MS stainless steel left opening 0890011 0890014 right opening 0890010 0890015 72 FATH Industrial Hardware Cover Stays Telescopic Cover Stay Telescopic Cover Stay Description Material Surface Pack Quantity To hold open flaps and doors Zinc plated steel Plain 10 pieces 19.5 15 1.5 10 26 3 64 35 50 2-Ø6.3 L=395 19.5 0 =71 5° max 10 5° L 0 = 1 = x ax ma m 50 19.5 15 1.5 26 10 3 35 3 max =10 5° A =22 0 max=105° B=620 3 10 -Ø 6. 3 26 Lmax=710 64 35 50 2-Ø6.3 L=215 19.5 <m <ma x 5° =10 55 x=3 Lma 50 3 =10 0 5° A x=1 0 <ma 5° 10 = ax 35 10 3-Ø 6. 26 3 Lmax=355 <max=105°B=315 Version Part # long size 0890024 short size 0890025 73 FATH Industrial Hardware Cover Stays Cover Stay Cover Stay Description Material Surface Pack Quantity To hold open flaps and doors Zinc plated MS Plain 10 pieces Long size 25 Ø8. 2 9.5 3 12 Short size 25 9.5 3 Ø8. 2 12 L=214 L Extended L=132 L Extended 0.6 11 0.6 Ø1 Ø8 .2 10 164.0 2. 248.0 177.0 3. 261.0 189.5 4. 274.5 202.5 5. 288.0 214.5 6. 301.0 7. 314.5 8. 327.0 9. 340.0 10. 354.0 35 3 26 234.5 6.3 1. 2 3 .2 30 3-Ø L extended [mm] Ø8 10 Stop 11 50 19.5 3 10 30 2 3 Ø1 Version Part # Long size 0890136 Short size 0890026 74 FATH Industrial Hardware Acessories Cams Cams Description To use with locks and latches Material Zinc plated MS; SS on request 19 20 20 0 ¨8.2-0.05 4.5 1.5 2-Ø6 0 ¨8.2-0.05 Ø5 36±0.05 Ø6 36±0.05 Ø5 0 5.8 -0.05 Ø10 4.5 Ø6 3 0 5.8 -0.05 3 t=4 t=4 3 3 4 1 t=4 t=4 L=45±2 0 ¨8.2-0.05 1.5 0 ¨8.2 -0.05 2-Ø6 L=45±2 L=35±2 L=45±2 19 Raised 4mm studs Shape A Shape B Shape C H dimension [mm] shape A shape B 2 0810247 4 0810248 6 0810249 0810276 8 0810250 10 13 Shape D shape C shape D 0810295 0810321 0810296 0810322 0810277 0810297 0810323 0810251 0810278 0810298 0810324 08102522 0810279 0810299 0810325 14 0810253 0810280 0810300 0810326 16 0810254 0810281 0810301 0810327 18 0810255 0810282 0810302 0810328 20 0810256 0810283 0810303 0810329 22 0810257 0810284 0810304 0810330 24 0810258 0810285 0810305 0810331 25 0810259 0810286 0810306 0810332 26 0810260 0810287 0810307 0810333 28 0810261 0810288 0810308 0810334 30 0810262 0810289 0810309 0810335 32 0810263 0810310 0810336 34 0810264 0810311 0810337 35 0810265 0810312 0810338 36 0810266 0810313 0810339 38 0810267 0810291 0810314 0810340 40 0810268 0810292 0810315 0810341 42 0810269 0810293 0810316 0810342 44 0810270 0810294 0810317 0810343 45 0810271 0810318 0810344 47 0810272 0810319 0810345 50 0810273 0810320 0810346 53 0810274 55 0810275 0810290 75 FATH Industrial Hardware Accessories Keys Keys Description Material Surface Pack Quantity To open and close cabinet locks Die cast zinc Plain 10 pieces 50 50 70 55 44 10 14 10 7 3.5 Ø9 14 6 Ø9 9 85 Ø8 14 L=55mm L=70mm L=85mm L [mm] double bit 5 mm triangular 8 mm square 8 mm 85 0890049 0890050 0890051 70 0890052 0890053 0890054 55 0890055 0890056 0890057 76 FATH Industrial Hardware Acessories Nut Nut To fix locks to panels Die cast zinc or SS Plain 10 pieces M22x1.5 Description Material Surface Pack Quantity 27 4.8 6 Material Part # Die cast zinc 0890058 Stainless Steel 0890059 77 FATH Industrial Hardware Acessories Rods Rods Description Material Surface Pack Quantity To latch door with multiple points Zinc plated MS; roller: nylon Plain 10 pieces Nylon roller Ø1 5 Ø3 6 6 7.5 Ø3 Ø8 30 Ø8 Version A 6 Version B Version C Nylon roller Ø15 5 Ø1 Ø1 H=23.5/28.5 58 30 7.5 Nylon roller 5 Nylon roller .2 Ø6 5 5 5 6 6 L L L Ø8 Version D 14 15 6.2 15 .2 Ø6 6.2 L L L Ø8 14 Version F (H=23.5) Version G (H=28.5) Version E L [mm] version A version B version C version D version E version F version G 400 0890060 0890068 0890076 0890084 0890092 0890100 0890108 500 0890061 0890069 0890077 0890085 0890093 0890101 0890109 600 0890062 0890070 0890078 0890086 0890094 0890102 0890110 700 0890063 0890071 0890079 0890087 0890095 0890103 0890111 800 0890064 0890072 0890080 0890088 0890096 0890104 0890112 900 0890065 0890073 0890081 0890089 0890097 0890105 0890113 1000 0890066 0890074 0890082 0890090 0890098 0890106 0890114 1100 0890067 0890075 0890083 0890091 0890099 0890107 0890115 1200 0890201 0890202 0890203 0890204 0890205 0890206 0890207 78 FATH Industrial Hardware Accessories Rod Accessories Rod Accessories Description Round rod adaptor Material Die cast zinc Pack Quantity 10 pieces Ø15 13.5 34.5 15.5 M6 6 Ø8.3 4 Ø6.2 Round Rod Adaptor Part # 0890027 Description Roller catch Material Die cast zinc Pack Quantity 10 pieces 25 19 9 3.5 9.5 4 24 2-Ø6.5 3 6 2-Ø12.5 6.5 12 40 Roller Catch 20 Part # 0890028 Description Roller catch Material Die cast zinc Pack Quantity 10 pieces Roller Catch Part # 0890029 79 FATH Industrial Hardware Accessories Rod Guides Rod Guides Description Material Color Pack Quantity To guide rods parallel to a door PA Black 10 pieces Long size Ø8 34.5 25 30.5 44 13 4.5 8.5 5 20 M6 Ø8 Ø28 Short size Ø8 25 20 25 29 38 13 4.5 8.5 4.5 20 M6 Ø8 Ø28 Size A [mm] Part # Mini size 20.0 0890129 Short size 25.0 0890030 Long size 30.5 0890031 Version A For weld stud M6x16 or M6x20 6.3 12.5 4 9.5 9.0 22 10.5 3.4 1.8 14.4 21.5 26 Strap can be broken off Version B For weld stud M5x12 21 14.4 25 3.4 9 18 6.4 5 5.4 Rod guide 80 version A version B 0890032 0890033 FATH Industrial Hardware Acessories Accessories for Locks Accessories for Locks Description Material Color Pack Quantity Finger pull PA Black 10 pieces Large size 22.5x20.1 For cutout 22.5x20.1 5.5 ¨ 20.2 R16 4 18 2.2 Ø28 Ø22.5 32.5 16 2.5 R1 Ø20.5 17 5 2.7 6. 5.6 Ø1 Ø1 3.5 Small size 16x14.5 For cutout 16x14.5 13 5 3.5 Ø2 Finger pull Description Material Color Pack Quantity large size small size 0890034 0890035 Dust cap PA Black 10 pieces 50.8 Ø3 5. 5 Large size 22.5x20.1 For cutout 22.5x20.1 22.5 1.3 Ø3 14 5 20 Ø35 .5 2 +0 -0 .1 8 1. Ø3 .5 Ø28 Ø2 2.5 R5 1.2 3.5 2.7 4.2 7.5 9.5 6 6 Ø1 10 13.5 Small size 16x13.5 For cutout 16x13.5 46 Dust cap 7.5 1.2 2.1 21 21.5 Ø27 large size small size 0890036 0890037 81 FATH Industrial Hardware Gaskets Content Gaskets – Table of Content Page 84 Edge protection profiles Page 85 Sealing profiles Page 87 Sealing profiles Page 91 Sealing profiles Page 92 Door sealing profiles 83 FATH Industrial Hardware Gaskets Edge Protectors PVC with Steel Carrier Broken or Wire Carrier 11.5 Design 84 Colour Clamping range [mm] Sales unit [m] Part # black 1,0–2,0 100 087EP001 white 1,0–2,0 100 087EP002 grey 1,0–2,0 100 087EP003 black 1,0–2,0 100 087EP004 white 1,0–2,0 100 087EP005 silver 1,0–2,0 100 087EP006 black 1,0–2,5 100 087EP007 black 2,0–4,0 100 087EP008 black 1,0–4,0 100 087EP009 anthrazit 1,0–4,0 100 087EP010 light grey 1,0–4,0 100 087EP011 white grey 1,0–4,0 100 087EP012 black 2,0–5,0 100 087EP013 black 6,0–8,0 100 087EP014 light grey 6,0–8,0 100 087EP015 black 8,0–10,0 100 087EP016 light grey 8,0–10,0 100 087EP017 black 1,0–2,5 100 087EP018 black 2,0–4,0 100 087EP019 black 4,0–6,0 100 087EP020 0840042 FATH Industrial Hardware Gaskets Sealing Profiles PVC with Steel Carrier Broken, Bonded with EPDM Sponge Rubber Design Clamping range [mm] Sales unit [m] black 1,0–2,0 100 black 1,0–4,0 50 087SP002 black 1,0–4,0 50 087SP003 black 1,0–2,5 50 087SP004 black 2,0–4,0 50 087SP005 black 4,0–6,0 50 087SP006 Colour 20.0 44.0 0840042 Part # 087SP001 85 FATH Industrial Hardware Gaskets Sealing Profiles PVC with Steel Carrier Broken, Bonded with EPDM Sponge Rubber Design Clamping range [mm] Sales unit [m] Part # black 1,0–4,0 50 087SP007 black 1,0–4,0 50 087SP008 Colour PVC with Embedded Steel Carrier or Wire Carrier Bonded with EPDM Sponge Rubber Design 86 Colour Clamping range [mm] Sales unit [m] Part # black 1,0–2,0 100 087SP009 black 1,0–4,0 50 087SP010 FATH Industrial Hardware Gaskets Sealing Profiles PVC with Steel Carrier Broken, Bonded with EPDM Sponge Rubber Design Clamping range [mm] Sales unit [m] Part # black 1,0–4,0 50 087SP011 black 1,0–2,5 50 087SP012 black 2,5–4,0 50 087SP013 black 4,0–6,0 50 087SP014 black 1,0–2,5 25 087SP015 black 2,0–4,0 25 087SP016 black 4,0–6,0 25 087SP017 Colour 87 FATH Industrial Hardware Gaskets Sealing Profiles Soft Rubber/Sponge Rubber EPDM with Embedded Wire or Steel Carrier Co-extrusion Profiles Design 88 Clamping range [mm] Sales unit [m] Part # black 0,5–1,5 100 087SP018 black 1,0–2,0 100 087SP019 black 1,0–3,0 100 087SP020 black 1,0–3,0 100 black 1,0–3,0 100 black 1,0–2,5 100 087SP023 black 2,0–4,0 100 087SP024 Colour wire carrier wire carrier wire carrier 087SP021 wire carrier 087SP022 oil resistant wire carrier wire carrier FATH Industrial Hardware Gaskets Sealing Profiles Soft Rubber/Sponge Rubber EPDM with Embedded Wire or Steel Carrier Co-extrusion Profiles Design Colour Clamping range [mm] Sales unit m] black 1,0–2,5 100 black 0,8–2,5 100 black 1,0–2,0 100 black 2,0 100 black 2,0 100 black 2,0 100 Part # 087SP025 wire carrier 087SP026 wire carrier 087SP027 wire carrier 087SP028 wire carrier 087SP029 EPDM wire carrier 087SP030 NBR with wire carrier 89 FATH Industrial Hardware Gaskets Sealing Profiles Soft Rubber/Sponge Rubber EPDM with Embedded Wire or Steel Carrier Co-extrusion Profiles Design Clamping range [mm] Sales unit [m] Part # black 1,5–3,0 100 087SP031 black 1,5–3,0 100 087SP032 black 2,0–4,0 75 087SP033 black 4,0–6,0 75 087SP034 Colour wire carrier wire carrier steel carrier broken steel carrier broken black 1,0–3,5 50 black 1,0–3,5 75 087SP035 steel carrier broken 087SP036 oil resistant steel carrier broken 90 FATH Industrial Hardware Gaskets Sealing Profiles Soft Rubber/Sponge Rubber EPDM with Embedded Wire or Steel Carrier Co-extrusion Profiles Design Colour Clamping range [mm] Sales unit [m] black 1,0–2,0 100 black 1,0–2,5 150 black 1,0–3,0 100 black 1,0–2,5 50 black 1,0–2,0 100 black 1,25–2,0 100 Part # 087SP037 wire carrier 087SP038 wire carrier 087SP039 wire carrier 087SP040 wire carrier 087SP041 wire carrier 087SP042 steel carrier one-sided broken 91 FATH Industrial Hardware Gaskets Door Sealing Profiles Door Sealing Profiles Soft PVC Design 92 Colour Sales unit [m] Part # PVC black 140 089SP043 PVC black 140 089SP044 PVC black 140 089SP045 PVC black 100 089SP046 Material FATH Industrial Hardware Nice to Know Part Number Imdex Part Number Index 0210107.......................... 31 0210116..........................32 0810010.......................... 23 0810011.......................... 23 0810012.......................... 23 0810025..........................22 0810026.........................22 0810027..........................22 0810028.........................22 0810029.........................22 0810030.........................22 0810031..........................22 0810032..........................22 0810039.......................... 23 0810040......................... 23 0810041.......................... 23 0810042......................... 23 0810043.......................... 23 0810044......................... 23 0810045.......................... 23 0810046......................... 23 0810047.......................... 23 0810048......................... 23 0810049......................... 23 0810050......................... 23 0810051.......................... 23 0810052.......................... 23 0810053.......................... 23 0810054..........................24 0810055..........................24 0810056.......................... 25 0810057.......................... 25 0810058......................... 25 0810059.......................... 25 0810060......................... 25 0810061.......................... 25 0810062......................... 25 0810063......................... 25 0810064......................... 25 0810065......................... 25 0810066......................... 25 0810067.......................... 25 0810068......................... 25 0810069......................... 25 0810070.......................... 25 0810071.......................... 25 0810072..........................28 0810073..........................28 0810074..........................28 0810075..........................28 0810076..........................28 0810077..........................28 0810088.........................28 0810089.........................28 0810090......................... 27 0810091.......................... 27 0810092.........................26 0810093..........................26 0810094.........................29 0810095..........................30 0810096.........................30 0810097..........................30 0810098.........................30 0810099.........................30 0810100..........................30 0810101..........................30 0810102..........................30 0810103.......................... 31 0810104.......................... 31 0810105.......................... 31 0810106.......................... 31 94 0810112..........................32 0810113..........................32 0810114..........................32 0810115..........................32 0810117...........................32 0810118..........................32 0810123.......................... 33 0810124.......................... 33 0810125.......................... 33 0810126.......................... 33 0810127.......................... 33 0810128.......................... 33 0810129.......................... 33 0810130.......................... 33 0810131.......................... 33 0810132.......................... 33 0810133.......................... 33 0810134.......................... 33 0810135.......................... 33 0810136.......................... 33 0810137.......................... 33 0810138.......................... 33 0810139.......................... 33 0810140.......................... 33 0810141.......................... 33 0810142.......................... 33 0810143.......................... 33 0810144.......................... 33 0810145.......................... 33 0810146.......................... 33 0810147.......................... 33 0810148.......................... 33 0810149.......................... 33 0810150.......................... 33 0810151.......................... 33 0810152.......................... 33 0810153.......................... 33 0810154.......................... 33 0810155.......................... 33 0810156.......................... 33 0810157.......................... 33 0810158.......................... 33 0810159.......................... 33 0810160.......................... 33 0810161.......................... 33 0810162.......................... 33 0810163.......................... 33 0810164.......................... 33 0810165.......................... 33 0810166..........................34 0810167..........................34 0810168..........................34 0810169..........................34 0810174..........................34 0810175..........................34 0810176..........................34 0810177..........................34 0810178.......................... 35 0810187.......................... 35 0810190..........................36 0810192.......................... 37 0810193.......................... 37 0810194.......................... 37 0810195.......................... 37 0810196.......................... 37 0810197.......................... 37 0810198.......................... 37 0810203..........................38 0810204.........................38 0810205..........................38 0810206.........................38 0810207..........................38 0810208.........................38 0810209.........................38 0810210..........................38 0810211..........................38 0810212..........................38 0810213..........................38 0810214..........................38 0810215..........................38 0810216..........................38 0810217..........................38 0810218..........................38 0810219..........................38 0810220.........................38 0810221..........................38 0810222.........................38 0810223..........................38 0810224.........................38 0810225..........................38 0810226.........................38 0810227..........................38 0810228.........................38 0810229..........................38 0810230..........................38 0810231..........................38 0810232..........................38 0810233..........................38 0810234..........................38 0810235..........................40 0810236..........................40 0810237..........................39 0810237..........................39 0810238.........................39 0810238.........................39 0810239..........................39 0810240.........................39 0810240.........................39 0810241..........................39 0810241..........................39 0810242.........................39 0810243..........................39 0810243..........................39 0810244.........................39 0810244.........................39 0810245..........................39 0810247.......................... 75 0810248......................... 75 0810249......................... 75 0810250.......................... 75 0810251.......................... 75 08102522........................ 75 0810253.......................... 75 0810254.......................... 75 0810255.......................... 75 0810256.......................... 75 0810257.......................... 75 0810258.......................... 75 0810259.......................... 75 0810260......................... 75 0810261.......................... 75 0810262......................... 75 0810263.......................... 75 0810264......................... 75 0810265.......................... 75 0810266......................... 75 0810267.......................... 75 0810268......................... 75 0810269......................... 75 0810270.......................... 75 0810271.......................... 75 0810272.......................... 75 0810273.......................... 75 0810274.......................... 75 0810275.......................... 75 0810276.......................... 75 0810277.......................... 75 0810278.......................... 75 0810279.......................... 75 0810280......................... 75 0810281.......................... 75 0810282......................... 75 0810283......................... 75 0810284......................... 75 0810285.......................... 75 0810286......................... 75 0810287.......................... 75 0810288......................... 75 0810289......................... 75 0810290......................... 75 0810291.......................... 75 0810292.......................... 75 0810293.......................... 75 0810294......................... 75 0810295.......................... 75 0810296......................... 75 0810297.......................... 75 0810298......................... 75 0810299.......................... 75 0810300......................... 75 0810301.......................... 75 0810302.......................... 75 0810303.......................... 75 0810304.......................... 75 0810305.......................... 75 0810306......................... 75 0810307.......................... 75 0810308......................... 75 0810309.......................... 75 0810310.......................... 75 0810311.......................... 75 0810312.......................... 75 0810313.......................... 75 0810314.......................... 75 0810315.......................... 75 0810316.......................... 75 0810317.......................... 75 0810318.......................... 75 0810319.......................... 75 0810320.......................... 75 0810321.......................... 75 0810322.......................... 75 0810323.......................... 75 0810324.......................... 75 0810325.......................... 75 0810326.......................... 75 0810327.......................... 75 0810328......................... 75 0810329.......................... 75 0810330.......................... 75 0810331.......................... 75 0810332.......................... 75 0810333.......................... 75 0810334.......................... 75 0810335.......................... 75 0810336.......................... 75 0810337.......................... 75 0810338.......................... 75 0810339.......................... 75 0810340.......................... 75 0810341.......................... 75 0810342.......................... 75 0810343.......................... 75 0810344.......................... 75 0810345.......................... 75 0810346.......................... 75 0810355..........................39 0810355..........................39 0810356..........................39 0810356..........................39 0810357..........................39 0810358..........................39 0810358..........................39 0810359..........................39 0810359..........................39 0810360.........................39 0810361..........................39 0810361..........................39 0810362..........................39 0810362..........................39 0810363..........................39 0810364..........................39 0810364..........................39 0810365..........................39 0810365..........................39 0810366.........................39 0810367..........................39 0810367..........................39 0810368.........................39 0810368.........................39 0810369..........................39 0810370..........................39 0810370..........................39 0810371..........................39 0810371..........................39 0810372..........................39 0820011............................9 0820012...........................9 0820013............................9 0820014...........................9 0820015............................9 0820016...........................9 0820017............................9 0820018...........................9 0820035..........................11 0820036..........................11 0820037..........................11 0820038..........................11 0820039..........................11 0820040..........................11 0820041..........................11 0820042..........................11 0820043..........................11 0820044..........................11 0820045..........................11 0820046..........................11 0820047..........................11 0820048..........................11 0820049..........................11 0820050..........................11 0820055......................... 13 0820056......................... 13 0820057......................... 13 0820058......................... 13 0820067......................... 15 0820083......................... 17 0820084......................... 17 0820085......................... 17 0820086......................... 17 0820087......................... 17 0820088......................... 17 0820089......................... 17 0820090......................... 17 0820126......................... 18 FATH Industrial Hardware Nice to Know Part Number Imdex Part Number Index 0820127.......................... 18 0820128......................... 18 0820129......................... 18 0820130.......................... 18 0820131.......................... 18 0830012..........................46 0830013..........................46 0830015.......................... 45 0830016......................... 47 0830017.......................... 47 0830018......................... 47 0830019.......................... 47 0830020......................... 47 0830021.......................... 47 0830022......................... 47 0830023......................... 47 0830024......................... 47 0830025......................... 47 0830026.........................48 0830027.........................48 0830030.........................48 0830031..........................48 0830034.........................48 0830035.........................48 0830036.........................49 0830037..........................49 0830038.........................49 0830039.........................49 0830040.........................49 0830041..........................49 0830042......................... 50 0830043......................... 50 0830044.........................49 0830045.........................49 0830046......................... 50 0830047......................... 51 0830048......................... 51 0830049......................... 52 0830050......................... 52 0830051.......................... 53 0830052......................... 53 0830053......................... 53 0830054......................... 53 0830055......................... 53 0830056......................... 53 0830057.......................... 53 0830058......................... 53 0830059......................... 54 0830060......................... 54 0830061......................... 54 0830062......................... 54 0830063......................... 54 0830064......................... 54 0830065......................... 54 0830066......................... 54 0830067......................... 55 0830069......................... 56 0830071.......................... 56 0830074.......................... 57 0830075..........................58 0830076......................... 57 0830077..........................58 0830090......................... 59 0830091.......................... 59 0830092......................... 59 0830093......................... 59 0830094......................... 59 0830095......................... 59 0830096......................... 59 0830097......................... 59 0830098......................... 59 0830099......................... 59 0830100.........................60 0830101..........................60 0830102..........................60 0830103..........................60 0830104..........................60 0830105..........................60 0830109.......................... 61 0830110.......................... 61 0830111.......................... 61 0830112.......................... 61 0830113..........................42 0830114..........................42 0830115.......................... 43 0830116.......................... 43 0830117..........................44 0830118..........................44 0830167.......................... 55 0830169.......................... 56 0830177..........................58 0840003.........................68 0840011..........................62 0840012.........................64 0840013.........................63 0840014.........................63 0840015..........................63 0840016.........................63 0840017..........................64 0840019.........................66 0840020.........................66 0840021.........................66 0840022.........................66 0840023.........................65 0840024.........................65 0840025.........................65 0840026.........................65 0840027.........................66 0840028.........................66 0840029.........................66 0840030.........................66 0840031.......................... 67 0840032......................... 67 0840033.........................68 0840034.........................68 0840035.........................68 0840036.........................68 0840037.........................68 0840038.........................65 0840039.........................65 0840040.........................65 0840041.........................65 0840042.........................68 0840042.........................85 0840043.........................68 0840044.........................68 0840045.........................68 0840046.........................68 0840046.........................68 0840048.........................68 0840049.........................68 0840050......................... 67 0840051.......................... 67 087EP001........................84 087EP002.......................84 087EP003........................84 087EP004.......................84 087EP005........................84 087EP006.......................84 087EP007........................84 087EP008.......................84 087EP009.......................84 087EP010........................84 087EP011........................84 087EP012........................84 087EP013........................84 087EP014........................84 087EP015........................84 087EP016........................84 087EP017........................84 087EP018........................84 087EP019........................84 087EP020.......................84 087SP001........................85 087SP002.......................85 087SP003.......................85 087SP004.......................85 087SP005.......................85 087SP006.......................85 087SP007.......................86 087SP008.......................86 087SP009.......................86 087SP010........................86 087SP011........................ 87 087SP012........................ 87 087SP013........................ 87 087SP014........................ 87 087SP015........................ 87 087SP016........................ 87 087SP017........................ 87 087SP018........................88 087SP019........................88 087SP020.......................88 087SP021........................88 087SP022.......................88 087SP023.......................88 087SP024.......................88 087SP025.......................89 087SP026.......................89 087SP026.......................89 087SP027........................89 087SP029.......................89 087SP030.......................89 087SP031........................90 087SP032.......................90 087SP033........................90 087SP034.......................90 087SP035........................90 087SP036.......................90 087SP037........................ 91 087SP038....................... 91 087SP039....................... 91 087SP040....................... 91 087SP041........................ 91 087SP042....................... 91 0880001...........................8 0880002...........................8 0880003...........................8 0880004...........................8 0880005...........................8 0880006...........................8 0880007...........................8 0880008...........................8 0880009......................... 10 0880010......................... 10 0880011.......................... 10 0880012......................... 10 0880013......................... 10 0880014......................... 10 0880015......................... 10 0880016......................... 10 0880017.......................... 12 0880018......................... 12 0880019......................... 12 0880020......................... 12 0880021......................... 14 0880025......................... 16 0880026......................... 16 0880027......................... 16 0880028......................... 16 0880029......................... 16 0880030......................... 16 0880031......................... 16 0880032......................... 16 0880041......................... 19 0880042......................... 19 0880043......................... 19 0880045......................... 19 0880046.........................20 0880055......................... 21 0880056......................... 21 0880057......................... 21 0880058......................... 21 0890008......................... 70 0890009......................... 70 0890010......................... 72 0890011.......................... 72 0890014......................... 72 0890015.......................... 72 0890024......................... 73 0890025......................... 73 0890026......................... 74 0890027......................... 79 0890028......................... 79 0890029......................... 79 0890030.........................80 0890031..........................80 0890032.........................80 0890033.........................80 0890034......................... 81 0890035......................... 81 0890036......................... 81 0890037......................... 81 0890049......................... 76 0890050......................... 76 0890051.......................... 76 0890052......................... 76 0890053......................... 76 0890054......................... 76 0890055......................... 76 0890056......................... 76 0890057......................... 76 0890058......................... 77 0890059......................... 77 0890060.........................78 0890061.........................78 0890062.........................78 0890063.........................78 0890064.........................78 0890065.........................78 0890066.........................78 0890067.........................78 0890068.........................78 0890069.........................78 0890070.........................78 0890071..........................78 0890072.........................78 0890073.........................78 0890074.........................78 0890075.........................78 0890076.........................78 0890077.........................78 0890078.........................78 0890079.........................78 0890080.........................78 0890081.........................78 0890082.........................78 0890083.........................78 0890084.........................78 0890085.........................78 0890086.........................78 0890087.........................78 0890088.........................78 0890089.........................78 0890090.........................78 0890091.........................78 0890092.........................78 0890093.........................78 0890094.........................78 0890095.........................78 0890096.........................78 0890097.........................78 0890098.........................78 0890099.........................78 0890100.........................78 0890101..........................78 0890102.........................78 0890103..........................78 0890104.........................78 0890105..........................78 0890106.........................78 0890107..........................78 0890108.........................78 0890109.........................78 0890110..........................78 0890111..........................78 0890112..........................78 0890113..........................78 0890114..........................78 0890115..........................78 0890129.........................80 0890136.......................... 74 0890142......................... 71 0890143.......................... 71 0890144......................... 71 0890145.......................... 71 0890146......................... 71 0890147.......................... 71 0890148......................... 71 0890149......................... 71 0890201.........................78 0890202.........................78 0890203.........................78 0890204.........................78 0890205.........................78 0890206.........................78 0890207.........................78 089201...........................29 089202...........................29 089SP043.......................92 089SP044.......................92 089SP045.......................92 089SP046.......................92 095005...........................42 095005S02.....................42 095006........................... 43 095006S02..................... 43 095009...........................44 095009S01......................44 09574040E......................42 09575050E...................... 43 09576060E......................44 95 FATH Industrial Hardware Nice to Know Dimension Conversion Conversion Table Inch – mm Inches (Fraction) Decimal Inches 0 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 0,0000 0,0156 0,0313 0,0469 0,0625 0,0781 0,0938 0,1094 0,1250 0,1406 0,1563 0,1719 0,1875 0,2031 0,2188 0,2344 0,2500 0,2656 0,2813 0,2969 0,3125 0,3281 0,3438 0,3594 0,3750 0,3906 0,4063 0,4219 0,4375 0,4531 0,4688 0,4844 0,5000 0,5156 0,5313 0,5469 0,5625 0,5781 0,5938 0,6094 0,6250 0,6406 0,6563 0,6719 0,6875 0,7031 0,7188 0,7344 0,7500 0,7656 0,7813 0,7969 0,8125 0,8281 0,8438 0,8594 0,8750 0,8906 0,9063 0,9219 0,9375 0,9531 0,9688 0,9844 96 0’’ 0,00 0,40 0,79 1,19 1,59 1,98 2,38 2,78 3,18 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,53 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70 13,10 13,49 13,89 14,29 14,68 15,08 15,48 15,88 16,27 16,67 17,07 17,46 17,86 18,26 18,65 19,05 19,45 19,84 20,24 20,64 21,03 21,43 21,83 22,23 22,62 23,02 23,42 23,81 24,21 24,61 25,00 1’’ 25,40 25,80 26,19 26,59 26,99 27,38 27,78 28,18 28,58 28,97 29,37 29,77 30,16 30,56 30,96 31,35 31,75 32,15 32,54 32,94 33,34 33,73 34,13 34,53 34,93 35,32 35,72 36,12 36,51 36,91 37,31 37,70 38,10 38,50 38,89 39,29 39,69 40,08 40,48 40,88 41,28 41,67 42,07 42,47 42,86 43,26 43,66 44,05 44,45 44,85 45,24 45,64 46,04 46,43 46,83 47,23 47,63 48,02 48,42 48,82 49,21 49,61 50,01 50,40 2’’ 50,80 51,20 51,59 51,99 52,39 52,78 53,18 53,58 53,98 54,37 54,77 55,17 55,56 55,96 56,36 56,75 57,15 57,55 57,94 58,34 58,74 59,13 59,53 59,93 60,33 60,72 61,12 61,52 61,91 62,31 62,71 63,10 63,50 63,90 64,29 64,69 65,09 65,48 65,88 66,28 66,68 67,07 67,47 67,87 68,26 68,66 69,06 69,45 69,85 70,25 70,64 71,04 71,44 71,83 72,23 72,63 73,03 73,42 73,82 74,22 74,61 75,01 75,41 75,80 Inches 6’’ Millimeters 3’’ 4’’ 5’’ 76,20 76,60 76,99 77,39 77,79 78,18 78,58 78,98 79,38 79,77 80,17 80,57 80,96 81,36 81,76 82,15 82,55 82,95 83,34 83,74 84,14 84,53 84,93 85,33 85,73 86,12 86,52 86,92 87,31 87,71 88,11 88,50 88,90 89,30 89,69 90,09 90,49 90,88 91,28 91,68 92,08 92,47 92,87 93,27 93,66 94,06 94,46 94,85 95,25 95,65 96,04 96,44 96,84 97,23 97,63 98,03 98,43 98,82 99,22 99,62 100,01 100,41 100,81 101,20 101,60 102,00 102,39 102,79 103,19 103,58 103,98 104,38 104,78 105,17 105,57 105,97 106,36 106,76 107,16 107,55 107,95 108,35 108,74 109,14 109,54 109,93 110,33 110,73 111,13 111,52 111,92 112,32 112,71 113,11 113,51 113,90 114,30 114,70 115,09 115,49 115,89 116,28 116,68 117,08 117,48 117,87 118,27 118,67 119,06 119,46 119,86 120,25 120,65 121,05 121,44 121,84 122,24 122,63 123,03 123,43 123,83 124,22 124,62 125,02 125,41 125,81 126,21 126,60 127,00 127,40 127,79 128,19 128,59 128,98 129,38 129,78 130,18 130,57 130,97 131,37 131,76 132,16 132,56 132,95 133,35 133,75 134,14 134,54 134,94 135,33 135,73 136,13 136,53 136,92 137,32 137,72 138,11 138,51 138,91 139,30 139,70 140,10 140,49 140,89 141,29 141,68 142,08 142,48 142,88 143,27 143,67 144,07 144,46 144,86 145,26 145,65 146,05 146,45 146,84 147,24 147,64 148,03 148,43 148,83 149,23 149,62 150,02 150,42 150,81 151,21 151,61 152,00 152,40 152,80 153,19 153,59 153,99 154,38 154,78 155,18 155,58 155,97 156,37 156,77 157,16 157,56 157,96 158,35 158,75 159,15 159,54 159,94 160,34 160,73 161,13 161,53 161,93 162,32 162,72 163,12 163,51 163,91 164,31 164,70 165,10 165,50 165,89 166,29 166,69 167,08 167,48 167,88 168,28 168,67 169,07 169,47 169,86 170,26 170,66 171,05 171,45 171,85 172,24 172,64 173,04 173,43 173,83 174,23 174,63 175,02 175,42 175,82 176,21 176,61 177,01 177,40 7’’ 8’’ 9’’ 10’’ 11’’ 177,80 178,20 178,59 178,99 179,39 179,78 180,18 180,58 180,98 181,37 181,77 182,17 182,56 182,96 183,36 183,75 184,15 184,55 184,94 185,34 185,74 186,13 186,53 186,93 187,33 187,72 188,12 188,52 188,91 189,31 189,71 190,10 190,50 190,90 191,29 191,69 192,09 192,48 192,88 193,28 193,68 194,07 194,47 194,87 195,26 195,66 196,06 196,45 196,85 197,25 197,64 198,04 198,44 198,83 199,23 199,63 200,03 200,42 200,82 201,22 201,61 202,01 202,41 202,80 203,20 203,60 203,99 204,39 204,79 205,18 205,58 205,98 206,38 206,77 207,17 207,57 207,96 208,36 208,76 209,15 209,55 209,95 210,34 210,74 211,14 211,53 211,93 212,33 212,73 213,12 213,52 213,92 214,31 214,71 215,11 215,50 215,90 216,30 216,69 217,09 217,49 217,88 218,28 218,68 219,08 219,47 219,87 220,27 220,66 221,06 221,46 221,85 222,25 222,65 223,04 223,44 223,84 224,23 224,63 225,03 225,43 225,82 226,22 226,62 227,01 227,41 227,81 228,20 228,60 229,00 229,39 229,79 230,19 230,58 230,98 231,38 231,78 232,17 232,57 232,97 233,36 233,76 234,16 234,55 234,95 235,35 235,74 236,14 236,54 236,93 237,33 237,73 238,13 238,52 238,92 239,32 239,71 240,11 240,51 240,90 241,30 241,70 242,09 242,49 242,89 243,28 243,68 244,08 244,48 244,87 245,27 245,67 246,06 246,46 246,86 247,25 247,65 248,05 248,44 248,84 249,24 249,63 250,03 250,43 250,83 251,22 251,62 252,02 252,41 252,81 253,21 253,60 254,00 254,40 254,79 255,19 255,59 255,98 256,38 256,78 257,18 257,57 257,97 258,37 258,76 259,16 259,56 259,95 260,35 260,75 261,14 261,54 261,94 262,33 262,73 263,13 263,53 263,92 264,32 264,72 265,11 265,51 265,91 266,30 266,70 267,10 267,49 267,89 268,29 268,68 269,08 269,48 269,88 270,27 270,67 271,07 271,46 271,86 272,26 272,65 273,05 273,45 273,84 274,24 274,64 275,03 275,43 275,83 276,23 276,62 277,02 277,42 277,81 278,21 278,61 279,00 279,40 279,80 280,19 280,59 280,99 281,38 281,78 282,18 282,58 282,97 283,37 283,77 284,16 284,56 284,96 285,35 285,75 286,15 286,54 286,94 287,34 287,73 288,13 288,53 288,93 289,32 289,72 290,12 290,51 290,91 291,31 291,70 292,10 292,50 292,89 293,29 293,69 294,08 294,48 294,88 295,28 295,67 296,07 296,47 296,86 297,26 297,66 298,05 298,45 298,85 299,24 299,64 300,04 300,43 300,83 301,23 301,63 302,02 302,42 302,82 303,21 303,61 304,01 304,40
