PANELBOARDS AND LOADCENTRES
Easy Selection Guide
POWER DISTRIBUTION AND PROTECTION
nhp.com.au
nhp-nz.com
A panelboard is a distribution centre for the electrical circuits within an installation. The mains
power comes in and is divided into the sub circuits. When selecting a panelboard, you need an
understanding of the number of circuits and the circuit breakers that are going to protect those
circuits. There are also other factors, such as the environment of the installation and any
accessories that may be needed.
step
1
There are six steps involved in selecting the right panelboard option.
STEP 1: Select the breaker type:
DIN-mount Miniature Circuit Breakers (MCB) NEMA Style
MOD6
Din-T
Safe-T
Most times the Miniature Circuit Breakers will be used, however if a contractor is replacing
or adding to an existing building, they may require the NEMA style breakers and boards.
Panelboards are sold as MOD6, Din-T or Safe-T and come with the correct busbar chassis to
accommodate the chosen breaker style.
step
step
2
3
2
STEP 2: What is the chassis size?
As mentioned, a panelboard distributes sub circuits, so it is
important to know how many circuits are required for the
installation. Each circuit requires a circuit breaker to be mounted
to the chassis; we refer to this as a pole. Boards are sized by the
number of poles required. You need to choose between an 18
pole, 24 pole, 36 pole, 48 pole, 60 pole or 96 pole board.
STEP 3: Mainswitch?
Select whether a mainswitch is required. Sometimes the
installer may choose to isolate the board from a circuit breaker
or mainswitch in another location. If this is the case, choose
“No mainswitch” for the board.
Note: The terms “isolator” and “mainswitch” are similar
devices, they describe a device that is used only to remove power
to the board. Isolators do not provide overload or short-circuit
protection, circuit breakers are used for that purpose.
Standard mainswitch options are 160A or 250A isolator.
1 pole
step
step
step
4
5
6
STEP 4: Type of board:
Choose the range of board required to suit the application and environment.
MOD6
CONCEPT
CONCEPT PLUS 2
CONCEPT PREMIER
CONCEPT TOUGH
• Economical
•Light
applications
•Sizes up to 96 pole
•IP66, weatherproof
•300mm depth
•Suits Din-T only
•1.6mm mild steel
•Larger enclosure size
•Stainless steel option
•Accessory box option
•Suits MCCB mounting
•Rain hood as standard
• Domestic
installations
• Limited options
STEP 5: Colour options:
The colour option describes the look of the panelboard, externally.
Standard base/door combinations available are:
Oyster Grey (MOD6 only)
Charcoal/Orange
Charcoal/Grey
Orange/Orange
Note: The paint options are flexible in the Concept range, but must
be specified when ordering the board if it’s a non-standard colour.
Charcoal/Orange and Charcoal/Grey
STEP 6: Other options:
Once the basic layout and look of the board has been selected, we then choose options to be
included. Some of the more common options include:
ITEM
DESCRIPTION
Split kit
The main bars of the chassis are split, so that they become dual fed (from both
top and bottom). This applies if the installation needs to be monitored separately,
ie. metering light and power circuits separately.
Accessory
module
Empty box of varying height. If you order a Concept Plus accessory module, it will be
the same dimensions as the Concept Plus panelboard, making it easy to mount side
by side or above/below each other. Typical uses include larger cable terminations,
over-size mainswitches, third-party lighting control.
Emergency
lighting test
Tests operation of Emergency Evacuation Lighting for buildings; installed next to the
mainswitch, on the horizontal DIN slot.
Flush
mounting kit
Allows panelboard to be mounted in a wall cavity, so closed door is flush with the
wall surface.
Rain hood
Fitted to flat roof, to give board a sloped-roof so any water dropping above, is
deflected away to the front or side channels of the board so no water gets in
from the top.
Plinth
When board needs to be floor-standing. This is a steel plate that is the same
dimension as the board, but adds about 100mm to the overall height when fixed to
the bottom of the board.
Lock dog
Designed for the purpose of safely and securely locking the DIN-mount MCBs.
Captive and non-captive versions are available, depending on whether the device
is fixed to the MCB or not.
IMAGE
3
Panelboard Quick Reference:
PANELBOARD TYPES
Circuit Breaker Types
MOD6
CONCEPT ECONOMY
CONCEPT PLUS 2
CONCEPT PREMIER
CONCEPT TOUGH
MOD6
Din-T
Din-T, Safe-T
Din-T, Safe-T, MCCB
Din-T, Safe-T, MCCB
Enclosure Details
Width
530mm
485mm
585mm
640mm
800mm
Depth
151mm
151mm
185mm
240mm
300mm
IP Rating
IP40
IP40
IP42
IP66
IP66
Material
1.0mm
1.0mm
1.6mm
1.6mm
2.0mm
Pole capacity
24 - 84
24 - 60
18 - 96
18 - 96
18 - 96
16 poles
12 poles
18 poles
18 poles
18 poles
Standard mainswitch rating
160A or 250A
160A or 250A
160A or 250A
160A or 250A
–
Maximum mainswitch size
250A
250A
400A
< 800A
< 800A
Busbar rating for MCBs
250A
250A
250A, 355A, 400A
250A, 355A, 400A
250A, 355A, 400A
Busbar rating for MCCBs
–
–
–
630A, < 800A
630A, < 800A
MOD6
DIN chassis
NC, CD, CT
NC, CD, CT, XA, XB
NC, CD, CT, XA, XB
Door colours
DIN rail mounting space (horizontal)
Main Switches, Busbars, E/N bars
Busbar type
Earth & neutral bars
Earth & neutral bar size
Dual earth & neutral bars
2-screw
2-screw
2-screw
2-screw
2-screw
19.0 x 9.5mm
19.0 x 9.5mm
19.0 x 9.5mm
Dual 19.0 x 9.5mm
Dual 19.0 x 9.5mm
–
–
–
a
a
a
a
a
a
a
Common Features
Horizontal DIN rail
Dished escutcheon
a
a
a
a
a
Knockouts for MCBs & accessories
a
a
a
a
a
Reversible doors RHS to LHS
a
a
a
a
a
White escutcheon
a
a
a
a
a
Door hinged independent of escutcheon
a
a
a
a
a
–
–
a
Standard
Standard
Standard
–
a
Standard
Standard
Accessories
Dust seal
Hinged escutcheon
Blank escutcheon
a
–
a
a
a
Removable gland plates
a
–
a
a
a
Emergency lighting kits
–
a
a
a
a
Duct fitting
–
a
a
a
a
Split chassis fitting
–
a
a
a
a
a
a
a
Split neutral link
–
a
Special colour
–
a
a
a
a
LockDIN fitting
–
–
a
a
a
Dust / rain hood
–
a
–
a
a
Custom assemblies
–
–
a
a
a
Accessory box
a
–
a
a
a
Brass or aluminium gland plates
–
–
a
a
a
MCCB mainswitch
–
–
a
a
a
a
Fault current limiter DIN fuses
–
–
a
a
Flush surround kits
a
a
a
a
–
Floor-mounting plinth
–
–
a
a
Wall-mounting brackets
–
–
a
Standard
–
Stainless steel enclosure
–
–
–
a
a
3-point locking door (boxes over 1000 mm)
–
–
–
a
a
4
Mounting
holes
Removable
gland plate
Hinged
Escutcheon
Spare DIN
rail space,
mounting
accessories
(ie: timers,
contactors,
pilot lights)
Flush
door
handle
Door grommets to
reverse door hinges
3-phase busbar chassis
(red-white-blue tee-offs)
Horizontal
DIN cut-out
Vertical 47mm
DIN cut-out
Gear tray
Accessory Module
Blank
Escutcheon
5
MOD6:
• Breaker type: MOD6 only
• Colour: RAL 7035 oyster grey
•IP40
• 250A busbar rating
• 1.0mm steel
• Suits MOD6 MCB’s and RCDs
Panelboards
Chassis
Box
size
Height
No Mainswitch
Catalogue Number
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
24 pole
1
650mm
M6PB24
M6PB24M160
M6PB24M250
36 pole
2
750mm
M6PB36
M6PB36M160
M6PB36M250
48 pole
3
850mm
M6PB48
M6PB48M160
M6PB48M250
60 pole
4
950mm
M6PB60
M6PB60M160
M6PB60M250
84 pole
5
1200mm
M6PB84
M6PB84M160
M6PB84M250
Width: 530mm Depth: 151mm
Accessories
Box size
Height
Catalogue
Number
0
400mm
M6ACCS0
1
650mm
M6ACCS1
2
750mm
M6ACCS2
3
850mm
M6ACCS3
4
950mm
M6ACCS4
5
1200mm
M6ACCS5
0
400mm
M6PBFK0
1
650mm
M6PBFK1
2
750mm
M6PBFK2
3
850mm
M6PBFK3
4
950mm
M6PBFK4
5
1200mm
M6PBFK5
0
400mm
M6PBGTS0
1
650mm
M6PBGTS1
2
750mm
M6PBGTS2
3
850mm
M6PBGTS3
4
950mm
M6PBGTS4
5
1200mm
M6PBGTS5
Open end cap
All
–
M6PBEC
Gland plate to suit
open end cap
All
–
M6PBGP
Closed end cap
All
_
M6PBECC
Item
Accessory modules
Width: 530mm
Depth: 151mm
Flush kits
Gear trays
6
Concept Economy:
• Breaker type: Din-T only
• Suits Din-T MCBs and RCDs
•IP40
• Grey or orange door option
• 1.0mm steel
•Gloss white escutcheon standard
with DIN cut-outs
• Two-tone colour scheme
Panelboards
Colour: grey
Chassis
Box size
Height
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
24 pole
1
700mm
CON24M160G
CON24M250G
36 pole
2
800mm
CON36M160G
CON36M250G
48 pole
3
900mm
CON48M160G
CON48M250G
60 pole
4
1000mm
CON60M160G
CON60M250G
Chassis
Box size
Height
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
24 pole
1
700mm
CON24M160O
CON24M250O
36 pole
2
800mm
CON36M160O
CON36M250O
48 pole
3
900mm
CON48M160O
CON48M250O
60 pole
4
1000mm
CON60M160O
CON60M250O
Colour: orange
Accessories
Item
Description
Split chassis kit
Supplied loose
Rotary control switch
Wired rotary control
switch
Key operated control
switch
Emergency lighting kit
(supplied loose)
Catalogue
Number
STKCD
CPELK11)
CPELK1W1)
CPELK21)
Pole fillers (Din-T)
1 strip = 4 poles
DTPF
Rain hood
Suits all sizes
CONWC
Flush kits
size 1
size 2
size 3
CONFK1
CONFK2
CONFK3
size 4
CONFK4
Din-T lock dog
(non-captive)
DTLD
Lock DIN™
Notes:
1)
Emergency lighting kits can be field fitted to Concept panelboards, utilising horizontal DIN knock outs at top of boards. Kits include
control switch, timer, 24 A 4 P N/C contactor, labels and wiring diagram to complete control circuit complying to AS 2293.1.
7
Concept Plus 2:
•IP42
•Hinged escutcheon option
• 1.6mm steel
•Suits Din-T or Safe-T MCB and RCDs
• 250A or 400A busbar rating
•Full range of accessory modules available
(400mm to 1700mm)
•Grey or orange door, and charcoal base
(orange base option)
Din-T (NC Chassis)
Pole
capacity
Box size
Height
18
1
700mm
No Mainswitch
Catalogue
Number
CDT18G2
24
1
700mm
36
2
900mm
48
2
60
3
72
4
1300mm
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
CDT18M160G2
CDT18M250G2
CDT24G2
CDT24M160G2
CDT24M250G2
CDT36G2
CDT36M160G2
CDT36M250G2
900mm
CDT48G2
CDT48M160G2
CDT48M250G2
1100mm
CDT60G2
CDT60M160G2
CDT60M250G2
CDT72G2
–
CDT72M250G2
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
Safe-T (CT Chassis)
Pole
capacity
Box size
Height
18
1
700mm
No Mainswitch
Catalogue
Number
CST18G
CST18M160G
CST18M250G
24
1
700mm
CST24G
CST24M160G
CST24M250G
36
2
900mm
CST36G
CST36M160G
CST36M250G
48
3
1100mm
CST48G
CST48M160G
CST48M250G
60
4
1300mm
CST60G
CST60M160G
CST60M250G
72
5
1500mm
CST72G
–
CST72M250G
84
6
1700mm
CST84G
–
CST84M250G
96
6
1700mm
CST96G
–
CST96M250G
For orange door, replace “G” with “O” in the Cat. No. codes.
For orange base and door, replace “G” with “OO” in the Cat. No. codes.
Accessories
Item
Box size
Accessory
modules
(with grey
Item
Accessory
modules
8
Height
Pole cap
With Escutcheon
Catalogue Number
CPACC24G2
0
400mm 24 (1 row 24 way)
0
400mm 48 (2 rows 24 way)
CPACC48G2
H
600mm 72 (3 rows 24 way)
CPACC72G2
Without
With Escutcheon
Escutcheon
Catalogue Number1)
Catalogue Number
CPACCS0G2
CPACCS0GE2
Box
size
Height
0
400mm
H
600mm
CPACCSHG2
CPACCSHGE2
1
700mm
–
CPACCS1GE2
2
900mm
–
CPACCS2GE2
3
1100mm
–
CPACCS3GE2
4
1300mm
–
CPACCS4GE2
5
1500mm
–
CPACCS5GE2
6
1700mm
–
CPACCS6GE2
For Orange door, replace “G” with “O” in the Cat. No. codes.
Concept Plus 2:
Accessories (cont)
Item
Catalogue Number
Lock dogs
Lock DIN™ locking assembly for MCBs
and single pole RCBOs.
Item
Gear trays
(to suit accessory
module)
DTLLA
Height
94mm
Catalogue Number
CPBGTS1
194mm
CPBGTS2
294mm
CPBGTS3
494mm
CPBGTSH
594mm
CPBGTS4
994mm
CPBGTS6
Gear trays for Concept Plus 2 must be 100mm shorter than enclosure size.
size 1
Catalogue
Number
CPBFK1
size 2
CPBFK2
size 3
CPBFK3
size 4
CPBFK4
size 5
CPBFK5
size 6
CPBFK6
–
CPECS
Steel (suits open end cap)
3mm
CPGPS
Brass (suits open end cap)
3mm
CPGPB
Aluminium (suits open end cap)
3mm
CPGPA
Item
Size
Flush surround kit
(supplied loose)
45mm width
End caps and gland plates
Open end cap (cut out for cable entry)
Emergency lighting kit
Rotary control switch
(supplied loose)
Rotary control switch
(complete wired loom)
Key operated control switch
–
CPELK11)
–
CPELK1W1)
–
CPELK21)
Dustproof door seal
Fits all box sizes
–
Floor mounting plinth
100mm height 3)
–
CPPLINTH
Escutcheon hinge kit2)
Suits all box sizes
–
CPESC
250A MCCB to CD chassis
–
CD250CKT2
200A MCCB to NC chassis
–
NCCK200CP
250A MCCB to NC chassis
–
NCCK250CP
400A MCCB to NC chassis
–
NCCK400CP
Connection kits
Notes:
1)
Emergency lighting kits can be field fitted to Concept Plus 2 panelboards, utilising horizontal DIN knock outs at top of boards. Kits
include control switch, timer, 24A 4 P N/C contactor, labels and wiring diagram to complete control circuit complying to AS 2293.1.
2)
Qty 2 required for size 1-4 enclosure. Qty 3 required for size 5-6 enclosure.
3)
Plinth is designed for bottom cable entry; if panelboard is freestanding additional support is required.
9
Concept Premier:
• Suits MCCB chassis
• Dual earth and neutral bars fitted
•Full range of accessory modules available
(600mm to 2000mm)
• Stainless enclosure option available
•IP66
• 1.6mm steel
• Fully welded construction
• Hinged escutcheon standard
• Door handle 3-point locking
• Suits Din-T or Safe-T MCB and RCDs
Din-T (CD chassis)
Pole
capacity
Box size
Height
18
1
800mm
No Mainswitch
Catalogue
Number
CPD18G
24
1
800mm
36
2
1000mm
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
CPD18M160G
CPD18M250G
CPD24G
CPD24M160G
CPD24M250G
CPD36G
CPD36M160G
CPD36M250G
48
2
1000mm
CPD48G
CPD48M160G
CPD48M250G
60
3
1200mm
CPD60G
CPD60M160G
CPD60M250G
72
4
1400mm
CPD72G
–
CPD72M250G
84
4
1400mm
CPD84G
–
CPD84M250G
96
5
1600mm
CPD96G
–
CPD96M250G
160A Mainswitch
Catalogue Number
250A Mainswitch
Catalogue Number
CPS18M160G
CPS18M250G
Safe-T (CT chassis)
No Mainswitch
Catalogue
Number
CPS18G
Pole
capacity
Box size
Height
18
1
800mm
24
1
800mm
CPS24G
CPS24M160G
CPS24M250G
36
2
1000mm
CPS36G
CPS36M160G
CPS36M250G
48
2
1000mm
CPS48G
CPS48M160G
CPS48M250G
60
3
1200mm
CPS60G
CPS60M160G
CPS60M250G
72
4
1400mm
CPS72G
–
CPS72M250G
84
4
1400mm
CPS84G
–
CPS84M250G
96
5
1600mm
CPS96G
–
CPS96M250G
For orange door, replace “G” with “O” in the Cat. No. codes. Relace “G” with “SS” for stainless steel option
Accessories
Item
Accessory
modules
Item
Box size
Height
Pole cap
H
600mm
24
With Escutcheon
Catalogue Number
CPPACC24G
H
600mm
48
CPPACC48G
Box size
Height
H
400mm
1
800mm
CPPACCS1GE
2
1000mm
CPPACCS2GE
3
1200mm
CPPACCS3GE
4
1400mm
CPPACCS4GE
5
1600mm
CPPACCS5GE
6
1800mm
CPPACCS6GE
Accessory
modules
10
For orange door, replace “G” with “O” in the Cat. No. codes.
With Escutcheon
Catalogue Number1)
CPPACCGE
Concept Premier:
Accessories (cont)
Item
Gear trays
(to suit accessory module)
Height
Catalogue Number
94mm
CPBGTS1
194mm
CPBGTS2
294mm
CPBGTS3
494mm
CPBGTSH
594mm
CPBGTS4
994mm
CPBGTS6
Item
Size
Catalogue Number
Flush surround kit
(supplied loose) 45mm width
size H
CPPFKH
size 1
CPPFK1
size 2
CPPFK2
size 3
CPPFK3
size 4
CPPFK4
size 5
CPPFK5
size 6
CPPFK6
size 7
CPPFK7
–
CPELK1
–
CPELK1W
–
CPELK2
Emergency lighting kit
Rotary control switch
(supplied loose)
Rotary control switch
(complete wired loom)
Key operated control switch
Weather proof rain hood
Mild steel
Stainless steel
Mild steel
Floor mounting plinth
Wall mounting brackets
Stainless steel
Single width
CPPWC
Double width
CPPWCD
Single width
CPPWCSS
Double width
CPPWCDSS
Single width
CPPPLINTHS
Double width
CPPPLINTHD
Single width
CPPPLINTHSSS
Double width
CPPPLINTHDSS
Mild steel
–
CPPWBMS
Stainless steel
–
CPPWB
Brass (suits open end cap)
3mm
CPPGPB
Brass (suits open end cap)
5mm
CPPGPB5
Aluminium (suits open end cap)
3mm
CPPGPA
Aluminium (suits open end cap)
6mm
CPPGPA6
CPECS
End caps and gland plates Open end cap (cut out for cable entry)
Item
Split chassis kits
Connection kits
CPD – CD chassis
CPS – CT chassis 250A
CPS – CT chassis 355A
250A MCCB to CD chassis
200A MCCB to NC chassis (Direct)
250A MCCB to NC chassis (TAG)
300A MCCB to NC chassis (TAG)
400A Loadbreak to NC chassis (TAG)
Catalogue Number
STKCD
STK250NDTH
STK300TH
CD250CKT2
NCCK200CPP
NCCK250CPP
NCCK400CPP
NCCK4002CPP
11
Concept Tough:
•2.0mm mild steel, or 316 stainless
• Suits Din-T or Safe-T MCB and RCDs
• Fully welded construction
• Suits MCCB chassis
• Available up to 96 pole capacity
• Dual earth and neutral bars fitted
• Door handle 3-point locking
•Four modular enclosure sizes:
500mm to 2000mm
• Lift-off, hinged escutcheon
• IP66 with door
Panelboards
Din-T (CD chassis)
Pole capacity
Box size
Height
Catalogue Number
18
2
1000mm
CTD18O
24
2
1000mm
CTD24O
36
2
1000mm
CTD36O
48
2
1000mm
CTD48O
60
3
1500mm
CTD60O
72
3
1500mm
CTD72O
84
3
1500mm
CTD84O
96
3
1500mm
CTD96O
For grey door, replace “O” with “G” in the Cat. No. codes. For stainless steel replace “O” with “SS” in Cat. No. codes.
XA chassis
18
3
1000mm
CTX18O
24
3
1000mm
CTX24O
36
3
1000mm
CTX36O
48
4
1000mm
CTX48O
60
4
1500mm
CTX60O
72
4
2000mm
CTX72O
For grey door, replace “O” with “G” in the Cat. No. codes. For stainless steel replace “O” with “SS” in Cat. No. codes.
Accessories
Item
Accessory modules
12
Pole capacity
Box size
Height
Catalogue
Number
18
1
500mm
CTACCO
24
1
500mm
CTACC24HO
36
1
500mm
CTACC24O
A loadcentre is a small enclosure, which houses the protective equipment (circuit breakers and
RCDs). A loadcentre is typically used when capacity and/or available space is minimal.
Typical loadcentre sizes are 12 and 18 pole, and available options include insulated plastic
constructions.
Loadcentres can be selected by the following criteria:
Breaker type DIN rail mounted (Din-T, MOD6), or clip-tray mounted (Safe-T)
Mounting
Recessed in a cavity (flush mount), or surface mount
Material
Plastic or mild steel
Protection
IP40, IP43, or IP55 rating
Accessories
Padlockable door, door lock kit
IP40 Insulated Loadcentres:
•Standard AS/NZS 3439-3
•Split earth neutral bars
•Suits NHP MOD6 Din-T MCBs and
associated DIN equipment
•Removable earth and neutral bar support
•Surface mount
•Supplied complete with buscomb
•Transparent or white door
•IP40
Surface mount
Pole
capacity
No. of
rows
12
1
18
1
24
2
36
3
Neutral
bar
Earth
bar
Transparent
door Catalogue
Number 1)
5/3/3
12
CSB12ST
CSB12SW
9/3/3/3
18
CSB18ST
CSB18SW
10/3/3/3/3
24
CSB24ST
CSB24SW
12/12/12
36
CSB36ST
CSB36SW
White door
Catalogue
Number. 1)
Flush mount
12
1
5/3/3
12
CSB12FT
CSB12FW
18
1
9/3/3/3
18
CSB18FT
CSB18FW
24
2
10/3/3/3/3
24
CSB24FT
CSB24FW
36
3
12/12/12
36
CSB36FT
CSB36FW
Accessories
Item
Metal backing plate
(for flush enclosure mechanical protection)
Pole capacity
Catalogue
12
CSB12FMP
18
CSB18FMP
24
CSB24FMP
36
CSB36FMP
13
IP43 Insulated Loadcentres:
•IP43
• Made from high impact resistant material
• Standard AS/NZS 3132
• Suits Din-T6, 10, 10H and 15 MCBs
•Comprehensive cable entry facilities at top,
bottom, sides and rear
• Surface mounting
• Totally insulated
ILC4S
Pole capacity
Description
Catalogue Number 1)
4
Surface mounting
ILC4S
8
Surface mounting
ILC8S
Accessories
ILC8S
Description
Earth
Neutral
E/N bar kit to suit ILC4
4 x 10mm
E/N bar kit to suit ILC8
2 x 16mm
8 x 10mm2
2
2
Catalogue Number
2
4 x 10mm
ILC4EN
2 x 16mm
8 x 10mm2
ILC8EN
2
IP55 Weatherproof Loadcentres:
•IP55
• Totally insulated
• Standard AS/NZS 3439.3
• 125mm centre distance between DIN rails
• Suits Din-T6, 10, 10H and 15 MCBs
• Split neutral and earth bars
• Padlocking possible
No. of rows
1)
2)
3)
Pole capacity Neutral bar1)2)
Earth bar 2)
Catalogue Number3)
1
12
8/4
8
DMWP12
2
24
18/6
18
DMWP24
3
36
24/12
18
DMWP36
Neutral bar indicated as e.g. 8/4 is split for use with RCDs.
Neutral bars and earth bars rated at 100 Amps.
Will not accept DSRCBH single pole RCDS.
Accessories
Description
14
Catalogue Number
Locking bracket, padlock and 3 keys
DMWPLD
Connection set for joining enclosures together
DMWPCS
Metal Loadcentres Din-T:
•Suitable for Din-T series circuit breakers up to
125A
• DIN rail fitted
• Suits Din-T6, 10, 10H and 15 MCBs
• Surface mount enclosures (without door)
•Supplied with earth and neutral bars, schedule
label
• IP30 (IP40 with door)
• Australian made
Pole capacity
Enclosure
Catalogue Number
Flush Escutcheon
Catalogue Number
Door
Catalogue Number
8
NLC8S
NLC8FE
LD6/8
12
NLC12S
NLC12FE
LD9/12
15
NLC15S
NLC15FE
LD12/15
18
NLC18S
NLC18FE
LD15/18
21
NLC21S
NLC21FE
LD18/21
24
NLC24S
–
–
Accessories
Description
Catalogue Number
DSLK
Locking kit includes bracket and fasteners (CL001)
Metal Loadcentres Safe-T:
• Suitable for Safe-T MCBs and accessories
• MCB clip tray fitted
•Supplied with neutral, earth bars and schedule
labels
• Australian made
• Suits Safe-T MCBs and Safe-T RCDs
• IP30 (IP40 with door)
• Surface mount enclosures
Pole capacity
Enclosure
Catalogue Number
Flush Escutcheon
Catalogue Number
Door
Catalogue Number
6
TLC6S
TLC6FE
LD6/8
9
TLC9S
TLC9FE
LD9/12
12
TLC12S
TLC12FE
LD12/15
15
TLC15S
TLC15FE
LD15/18
18
TLC18S
TLC18FE
LD18/21
21
TLC21S
TLC21FE
LD21
Accessories
Description
Locking kit includes bracket and fasteners (CL001)
Catalogue Number
DSLK
15
AUSTRALIA
NEW SOUTH WALES
QUEENSLAND
Sydney
30-34 Day Street North
Silverwater
NSW 2128
Tel +61 2 9748 3444
Brisbane
16 Riverview Place
Murarrie
QLD 4172
Tel +61 7 3909 4999
Melbourne
43-67 River Street
Richmond
VIC 3121
Tel +61 3 9429 2999
Newcastle
575 Maitland Road
Mayfield West
NSW 2304
Tel +61 2 4960 2220
Fax +61 2 4960 2203
Townsville
5 Leyland Street
Garbutt
QLD 4814
Tel +61 7 4779 0700
Fax +61 7 4775 1457
Laverton
104-106
William Angliss Drive
Laverton North
VIC 3026
Tel +61 3 9368 2901
Wollongong
34 Industrial Road
Unanderra
NSW 2526
Tel +61 2 4272 5763
Fax +61 2 4272 5957
Rockhampton
1 Lawson Street
Parkhurst
QLD 4702
Tel +61 7 4927 2277
Fax +61 7 4922 2947
nhp.com.au
SALES 1300 NHP NHP
FAX 1300 NHP FAX
VICTORIA
Albury / Wodonga
847 Ramsden Drive
Albury
NSW 2640
Tel +61 2 6049 0600
Fax +61 3 6025 0592
Dandenong
40-42 Cyber Loop
Dandenong South
VIC 3175
Tel +61 3 8773 6400
Fax +61 3 8768 8522
TASMANIA
Hobart
Unit 2
65 Albert Street
Moonah
TAS 7009
Tel +61 3 6228 9575
Fax +61 3 6228 9757
Launceston
Unit 3
13-17 Merino Street
Kings Meadows
TAS 7249
Tel +61 3 6345 2600
Fax +61 3 6344 6324
ACT
Canberra
Unit 1
187 Gladstone Street
Fyshwick
ACT 2609
Tel +61 2 6280 9888
Fax +61 2 6280 9588
WESTERN AUSTRALIA
Perth
38 Belmont Ave
Rivervale
WA 6103
Tel +61 8 9277 1777
NORTHERN
TERRITORY
Darwin
3 Steele Street
Winnellie
NT 0820
Tel +61 8 8947 2666
Fax +61 8 8947 2049
NHP Electrical Engineering Products Pty Ltd
A.B.N. 84 004 304 812
NHPNTUPANELBOARDESG 09/15 © Copyright NHP 2015
Toowoomba
Cnr Carroll Street and
Struan Court
QLD 4350
Tel +61 7 4634 4799
Fax +61 7 4633 1796
Cairns
Unit 2
1 Bramp Close
Portsmith
QLD 4870
Tel +61 7 4035 6888
Fax +61 7 4035 6999
SOUTH AUSTRALIA
Adelaide
36-38 Croydon Road
Keswick
SA 5035
Tel +61 8 8297 9055
NEW ZEALAND
nhp-nz.com
SALES 0800 NHP NHP
FAX 0800 FAX NHP
PO Box 62-009
Sylvia Park
Auckland 1644
New Zealand
Auckland
118a Carbine Road
Mt Wellington 1060
Tel +64 9 276 1967
Hamilton
78 Rostrevor Street
Hamilton 3204
Tel +64 7 849 0257
Fax +64 800 329 647
Napier
126 Taradale Road
Onekawa 4110
Tel +64 6 843 6928
Fax +64 800 329 647
New Plymouth
2 Dean Place
Waiwhakaiho 4312
Tel 0800 NHP NHP
Fax +64 800 329 647
Wellington
52 Victoria Street
Lower Hutt 5010
Tel +64 4 570 0634
Fax +64 800 329 647
Christchurch
27 Iversen Terrace
Waltham 8011
Tel +64 3 377 4407
Fax +64 3 377 4405
Dunedin
30 Fox Street
South Dunedin 9012
Tel 0800 NHP NHP
Fax +64 800 329 647