Contents
SECTION 1 SPANNER LOCKS ............................................ 1 - 1
SPANNER LOCK
18 MM - IP65 RATED ...................................................................... 1 - 2
SPANNER LOCK
30 MM - IP65 RATED ...................................................................... 1 - 3
WING KNOB
IP65 RATED No Longer Available.................................................. 1 - 4
SPANNER LOCK
18 MM - STAINLESS STEEL
IP65 RATED ..................................................................................... 1 - 5
SPANNER LOCK
30 MM - STAINLESS STEEL
IP65 RATED ..................................................................................... 1 - 6
SPANNER LOCK KEY No Longer Available..................................... 1 - 7
WING HANDLE
IP65 RATED No Longer Available.................................................. 1 - 8
LEVER HANDLE
IP65 RATED ..................................................................................... 1 - 9
LOCKABLE SPANNER
LOCK - 18 MM ............................................................................... 1 - 10
CAM ................................................................................................... 1 - 11
SECTION 2 - SWING HANDLES ........................................... 2 - 1
SWING HANDLE ................................................................................. 2 - 2
IP65 RATED ......................................................................................... 2 - 2
SWING HANDLE WITH
LONG SPINDLE - IP65 RATED ...................................................... 2 - 3
SWING HANDLE WITH LONG
SPINDLE - STAINLESS STEEL
GRADE 316 - IP 65 RATED............................................................. 2 - 4
SECTION 3 - STANDARD LOCKING HANDLES .................. 3 - 1
LARGE TEE HANDLE......................................................................... 3 - 2
LARGE TEE HANDLE A/HG ASSEMBLY INSTRUCTIONS .............. 3 - 3
SMALL TEE HANDLE ......................................................................... 3 - 4
LEVER HANDLE ................................................................................. 3 - 5
Continued on page 2
1
LEVER HANDLE
PADLOCKING ................................................................................. 3 - 6
PADLOCKING HANDLE STAINLESS STEEL No Longer Available. 3 - 7
VERTICAL FLUSH HANDLE
3 POINT LOCKING. No Longer Available...................................... 3 - 8
FLUSH HANDLE
3 POINT LOCKING.......................................................................... 3 - 9
FLUSH HANDLE CODES ................................................................. 3 - 10
KNOB
3 POINT LOCKING......No Longer Available................................ 3 - 11
SECTION 4 - HANDLE ACCESSORIES ................................ 4 - 1
HANDLE CAM OPTIONS .................................................................... 4 - 2
UNIVERSAL 3 POINT LOCKING HANDLE MECHANISM................. 4 - 3
UNIVERSAL 3 POINT LOCKING HANDLE MECHANISM................. 4 - 4
SECTION 5 - CAMLOCKS ..................................................... 5 - 1
CAM LOCK
16 MM .............................................................................................. 5 - 2
CAM LOCK
19 MM .............................................................................................. 5 - 3
CAM LOCK
32 MM .............................................................................................. 5 - 4
SECTION 6 - HINGES ............................................................ 6 - 1
HINGE .................................................................................................. 6 - 2
FLAT END ............................................................................................ 6 - 2
HINGE .................................................................................................. 6 - 3
DOME END .......................................................................................... 6 - 3
HINGE
GRADE 316 - STAINLESS STEEL ................................................. 6 - 4
HINGE
SPECIAL.......................................................................................... 6 - 5
CABINET HINGE ................................................................................. 6 - 6
HINGE
CHAMFERED END.....No Longer Available.................................. 6 - 7
HINGE
OFFSET - BRASS ........................................................................... 6 - 8
Continued on page 3
2
SECTION 7 - RUBBER EXTRUSIONS .................................. 7 - 1
SEALING STRIP
SECTIONS ....................................................................................... 7 - 2
SEALING STRIP
SELF-GRIPPING ............................................................................. 7 - 3
SEALING STRIP
SELF-ADHESIVE ............................................................................ 7 - 4
WINDOW RUBBER ............................................................................. 7 - 5
RUBBER & SPONGE
PVC/EPDM - SELF-GRIPPING ...................................................... 7 - 6
SPONGE RUBBER
VARIOUS SHAPES .....No Longer Available................................... 7 - 7
SPONGE RUBBER
REGULAR SHAPES......No Longer Available................................. 7 - 8
SECTION 8 - SWITCHBOARD ACCESSORIES.................... 8 - 1
D PULL HANDLE ................................................................................ 8 - 2
D TYPE HANDLE ................................................................................ 8 - 3
THUMB SCREW .................................................................................. 8 - 4
LIFTING EYEBOLT
12 MM .............No Longer Available.............................................. 8 - 5
LIFTING EYEBOLT
16 MM .............No Longer Available.............................................. 8 - 6
BUDGET LOCK ................................................................................... 8 - 7
DOOR STAY
STAINLESS STEEL ......................................................................... 8 - 8
DOOR STAY
MILD STEEL .................................................................................... 8 - 9
3
PAGE 1 - 1
SECTION 1
SPANNER LOCKS
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SPANNER LOCK
18 MM - IP65 RATED
PAGE 1 - 2
Dimensions
18,0
ø32,0
7,0
4,0
RUBBER
WASHER
Barrel Inserts
Fixing Hole
Details
5p
5mm Pin
8D
8mm Square
2 mm Slot
8S
8mm Square
7S
7mm Square
7F
7mm Female Square
20,1
20,1
3P
3mm Pin
8T
8mm Triangle
DS
2mm Driver
Slot
ø22,5
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
R
1
8
7/ 8
9 / 10 11 12
A
S
* *
BARREL INSERT
FINISH
SEE ABOVE
3
MOVEMENT
FIXING
BRIGHT CHROME
S
90 DEGREES CLOCKWISE TO UNLOCK
A
90 DEGREES ANTI-CLOCKWISE TO UNLOCK
H
* *
CAM TYPE
EXAMPLE:
NUT
A/ S
R
1
8/ 7
S/ 3
S/ H
S
REFER CAM DATA SHEET PAGE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SPANNER LOCK
30 MM - IP65 RATED
PAGE 1 - 3
Dimensions
30,0
ø32,0
7,0
4,0
RUBBER
WASHER
Barrel Inserts
Fixing Hole
Details
4
20,1
3P
3mm Pin
5p
5mm Pin
8D
8mm Square
2 mm Slot
8S
8mm Square
7S
7mm Square
20,1
7F
7mm Female Square
8T
8mm Triangle
DS
2mm Driver
Slot
ø22,5
Ordering Details
1
ASSEMBLY
MODEL
2
3
4
5/ 6
S
R
3
0
7/ 8
9 / 10 11 12
A
* *
BARREL INSERT
FINISH
SEE ABOVE
3
MOVEMENT
FIXING
BRIGHT CHROME
S
90 DEGREES CLOCKWISE TO UNLOCK
A
90 DEGREES ANTI-CLOCKWISE TO UNLOCK
H
* *
CAM TYPE
EXAMPLE:
NUT
A/ S
R
3
0/ 7
S/ 3
S/ H
S
REFER CAM DATA SHEET PAGE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SPANNER LOCK
18 MM - STAINLESS STEEL
IP65 RATED
PAGE 1 - 5
Dimensions
DIM. 'A'. REFER
TO CAM TYPE
TABLE BELOW
ø32,0
7,0 18,0
4,0
RUBBER
WASHER
Barrel Inserts
Fixing Hole Details
20,1
8D
8mm Square
2 mm Slot
8S
8mm Square
20,1
7S
7mm Square
ø22,5
8T
8mm Triangle
Cam Type
DS
2mm Driver
Slot
C AM PAR T N O .
Ordering Details
1/ 2
ASSEMBLY
MODEL
D IM 'A ' (M M )
3
4
5/ 6
R
1
8
7/ 8
T2
T66
2 8 .3
18
26
9 / 10 11 12
A
S
* *
BARREL INSERT
FINISH
SEE ABOVE
S
MOVEMENT
STAINLESS STEEL
S
FIXING
90 DEGREES CLOCKWISE TO UNLOCK
H
NUT
* *
CAM TYPE
EXAMPLE:
T1
A/ S
R
1
8/ 7
S/ S
S/ H
T
REFER CAM TYPE TABLE ABOVE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SPANNER LOCK
30 MM - STAINLESS STEEL
IP65 RATED
PAGE 1 - 6
Dimensions
DIM. 'A'. REFER
TO CAM TYPE
TABLE BELOW
30,0
ø32,0
7,0
4,0
RUBBER
WASHER
Barrel Inserts
Fixing Hole Details
20,1
4
8D
8mm Square
2 mm Slot
8S
8mm Square
20,1
7S
7mm Square
ø22,5
Cam Type
8T
8mm Triangle
DS
2mm Driver
Slot
C AM PAR T N O .
D IM 'A ' (M M )
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
R
3
0
7/ 8
T2
T66
4 0 .3
30
38
9 / 10 11 12
A
S
* *
BARREL INSERT
FINISH
SEE ABOVE
S
MOVEMENT
STAINLESS STEEL
S
FIXING
90 DEGREES CLOCKWISE TO UNLOCK
H
NUT
* *
CAM TYPE
EXAMPLE:
T1
A/ S
R
3
0/ 7
S/ S
S/ H
T
REFER CAM TYPE TABLE ABOVE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LEVER HANDLE
IP65 RATED
PAGE 1 - 9
Fixing Hole Details
20,1
20,1
ø22,5
Dimensions
38,0
ø28
ø24
102
18
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
L
-
T
7/ 8
9 / 10 11 12
A
H
KEY SERIES
0
1
KEY NO. 92268 - OTHER KEY CODES AVAILABLE
-
-
NON-LOCKING
FINISH
3
MOVEMENT
FIXING
BRIGHT CHROME
S
90 DEGREES CLOCKWISE TO UNLOCK
A
90 DEGREES ANTI-CLOCKWISE TO UNLOCK
H
* *
CAM TYPE
EXAMPLE:
NUT
A/ H
L
-
T/ 0
1/ 3
S/ H
S
REFER CAM DATA SHEET PAGE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LOCKABLE SPANNER
LOCK - 18 MM
PAGE 1 - 10
CAM
LOCK
FIXING NUT
LOCK
CAM
RUBBER
WASHER
Dimensions
47,5
20,0
ø32,0
CAM FIXING
SCREW
'O' RING
Fixing Hole Details
20,1
7,0
4,0
18,0
20,1
ø22,5
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
P
1
8
7/ 8
9 / 10 11 12
A
S
KEY SERIES
ROUND FACE
C
L
CL SERIES
0
1
92268
FINISH
3
MOVEMENT
BRIGHT CHROME
C
FIXING
90 DEGREES CLOCKWISE TO UNLOCK
H
CAM TYPE
EXAMPLE:
A/ S
P
1
8/ *
*/ 3
C/ H
NUT
S
C
S
C
4 MM OFFSET
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
CAM
PAGE 1 - 11
Spanner Lock Cam
ORDERING DETAILS: P/CAM-/S*
FORM A
FORM C
FORM B
FORM D
'Y'
CAM
S1
S2
PART NO.
FORM
C
A
DIM 'Y' 10.5
DIM 'X' 44.3 48.4
'X'
'X'
'X'
'X'
4MM
'Y'
4MM
S8
4MM
4MM
S3
S6
S9
C
C
C
D
2
48
8
46.3
14
45
26
45
20
'Y'
SA
SB
SC
D
D
C
32
45
39
45
4
47.4
SD
8.5 SQUARE
SE
SF
D
D
B
21
45
29
45
4
45
SJ
SK
SL
SM
C
D
C
C
11
34
29
32
6
44
3.5
37
3 Point Spanner Lock Cam
ORDERING DETAILS: P/CAM-/3*
20
4
8.5 SQUARE
36
CAM PART NO: 3A
10,3
45,5
20
45,5
45,5
20
8.5 SQUARE
2,5
4
36
36
CAM PART NO: 3B
CAM PART NO: 3D
8.5 SQUARE
4
CAM PART No: 3C
CAM PART NO: 3E
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 2 - 1
SECTION 2 - SWING
HANDLES
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SWING HANDLE
IP65 RATED
PAGE 2 - 2
Fixing Hole Details
20,1
20,1
80,0
ø22,5
ø9,0
13 MM MAXIMUM
PADLOCK DIAMETER
Dimensions
35
20
34
18,0
39
143
80
RUBBER
WASHERS
HIGH PRESSURE ZINC DIE CAST BODY
STAINLESS STEEL DIE CAST HASP
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
S
A
-
7/ 8
9 / 10 11 12
A
H
CAM FIXING
3
A
HANDLE FINISH
SHORT SPINDLE
6
CASE FINISH
6 = BLACK 3 = CHROME
6
FIXING
6 = BLACK 3 = CHROME
H
* *
CAM TYPE
EXAMPLE:
NUT
A/ H
S
A
-/
3
A/
* */
H
S
REFER CAM DATA SHEET PAGE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SWING HANDLE WITH
LONG SPINDLE - IP65 RATED
PAGE 2 - 3
Fixing Hole Details
20,1
20,1
80,0
ø22,5
ø9,0
13 MM MAXIMUM
PADLOCK DIAMETER
Dimensions
68
34
36
20 MIN
39
143
80
RUBBER
WASHERS
HIGH PRESSURE ZINC DIE CAST BODY
HIGH PRESSURE ZINC DIE CAST HASP
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
S
A
-
7/ 8
9 / 10 11 12
A
H
CAM FIXING
2
A
HANDLE FINISH
LONG SPINDLE
6
CASE FINISH
6 = BLACK 3 = CHROME
6
FIXING
6 = BLACK 3 = CHROME
H
* *
CAM TYPE
EXAMPLE:
NUT
A/ H
S
A
-/
2
A/
* */
H
S
REFER CAM DATA SHEET PAGE
1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SWING HANDLE WITH LONG
SPINDLE - STAINLESS STEEL
GRADE 316 - IP 65 RATED
PAGE 2 - 4
Fixing Hole Details
20,1
20,1
80,0
ø22,5
ø9,0
13 MM MAXIMUM
PADLOCK DIAMETER
Dimensions
68
34
36
20 MIN
143
39
80
RUBBER
WASHERS
BODY & HASP STAINLESS STEEL
Ordering Details
1/ 2
ASSEMBLY
3
4
5/ 6
S
S
-
7/ 8
9 / 10 11 12
A
MODEL
H
CAM FIXING
S
HANDLE FINISH
A
S
CASE FINISH
STAINLESS STEEL
S
FIXING
STAINLESS STEEL
H
* *
CAM TYPE
EXAMPLES:
NUT
A/ H
S
S
-/
*
A/ S
S/ H
S
1
*
2 = LONG 3 = SHORT
I/
H
S
S
-/
2
A/ S
S
LONG SPINDLE
I/
H
S
S
-/
3
A/ S
S
SHORT SPINDLE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 3 - 1
SECTION 3 - STANDARD
LOCKING HANDLES
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LARGE TEE HANDLE
PAGE 3 - 2
Fixing Hole
Details
44,5 CTRS
ø5,5 -2 PLACES.
ø12,0
FOR CONCEALED FIXING:
3/16 BSW THREAD NO FIXING SCREWS SUPPLIED
Dimensions
54
30
100
60
ø24
24
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
G
-
R
LOCKING
7/ 8
NON LOCKING
9 / 10 11 12
A
H
KEY SERIES
CONCEALED FIXING
0
1
92268
CL001
NON-LOCKING
FINISH
3
MOVEMENT
BRIGHT CHROME
A
90 DEGREES ANTI-CLOCKWISE TO UNLOCK
B
180 DEGREES CLOCKWISE OR ANTI-CLOCKWISE TO UNLOCK
C
90 DEGREES CLOCKWISE TO UNLOCK, LOCKABLE BOTH POSITIONS
S
90 DEGREES CLOCKWISE TO UNLOCK
*
SPINDLE TYPE
CAM TYPE
EXAMPLE:
A/ H
G
-
R/ 0
1/ 3
S/ E
CUSTOMER TO SPECIFY - REFER ASSEMBLY INSTRUCTIONS
*
*
-
-
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LARGE TEE HANDLE A/HG
ASSEMBLY INSTRUCTIONS
PAGE 3 - 3
PLAIN
SPINDLES
PLAIN NO
THREADED
T/SPIN/B2
T/SPIN/L2
THREADED
SPINDLES
LENGTH 'L'
31.5
T/SPIN/M2
39.5
T/SPIN/C2
43.5
T/SPIN/D2
T/SPIN/T2
50.5
T/SPIN/E2
T/SPIN/N2
74.5
T/SPIN/H2
100.5
T/SPIN/F2
136.5
ASSEMBLY PROCEDURE
1. Assemble handle to rose and rotate
clockwise over 1/4 turn.
2. Assemble detent bush locating over
lug on handle shaft.
3. Assemble spindle to retainer plate by
inserting into centre hole and moving
spindle sideways to locate in groove.
4. Assemble retainer plate/spindle to
handle/rose by inserting spindle into
square hole in detent bush and locating
retainer plate in rose, with location hole
aligned with boss.
5. Insert screw into one of the 3 holes
to suit movement required and tighten
maximum torque 1.0 Nm.
6. Check function and assemble barrel
to handle as required.
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SMALL TEE HANDLE
PAGE 3 - 4
ø5,5 -2
PLACES
44,5 CTRS
38,0 CTRS
Fixing Hole Details
ø12,0
CONCEALED FIXING
(MODEL A/HT8R)
MS THREAD
-FIXING SCREWS
SUPPLIED
Dimensions
ø5,5 - 2
PLACES
ø12,0
THROUGH FIXING
(MODEL A/HT8F)
30
46
60
ø24
24
UNIVERSAL MOVEMENT
LOCKING
NON LOCKING
UNIVERSAL STOPS CAN BE FITTED LH OR
RH, GIVING 90 DEGREES C'WISE MOVEMENT OR 90 DEGREES ANTI C'WISE
MOVEMENT AS REQUIRED
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
7/ 8
9 / 10 11 12
A
H
T
8
R
CONCEALED FIXING
H
T
8
F
THROUGH FIXING
KEY SERIES
0
1
92268
C
L
CL001
-
-
NON-LOCKING
FINISH
3
MOVEMENT
SPINDLE TYPE
BRIGHT CHROME
U
UNIVERSAL LEFT OR RIGHT HAND
B
180 DEGREES CLOCKWISE OR ANTI -CLOCKWISE TO UNLOCK
E
* *
CAM TYPE
EXAMPLE:
A/ H
T
8
R/ 0
1/ 3
U/ E
-
-
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LEVER HANDLE
PAGE 3 - 5
ø5,5 - 2
PLACES
ø12,0
CONCEALED FIXING
(MODEL A/HL8R)
MS THREAD
-FIXING SCREWS
SUPPLIED
ø5,5 - 2
PLACES
ø12,0
THROUGH FIXING
(MODEL A/HL8F)
30
48
115
60
Dimensions
44,5 CTRS
38,0 CTRS
Fixing Hole Details
UNIVERSAL MOVEMENT
UNIVERSAL STOPS CAN BE FITTED LH OR
RH, GIVING 90 DEGREES C'WISE MOVEMENT OR 90 DEGREES ANTI C'WISE
MOVEMENT AS REQUIRED
Ordering Details
1 /
AS SE MB LY
MOD E L
2
3
4
5 / 6
7 / 8
9 / 10
11
12
H
L
8
F
TH R OU GH FIX IN G
H
L
8
R
C ON C EALED FIXIN G
A
K E Y SE R IES
0
1
92268
C
L
C L 001
-
-
N ON -LOC K IN G
FIN ISH
3
MOVE MEN T
B R IGH T C H R OME
U
U N IVE R S AL LE FT OR R IGH T H AN D
B
SPIN D LE TYP E
180 D EGR EE S C LOC K W ISE OR AN TI -C LOC K W IS E TO U N LOC K
E
C AM TYPE
EXAMPLE :
A/ H
L
8
R / 0
1 /
3
U / E
*
*
-
-
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
LEVER HANDLE
PADLOCKING
PAGE 3 - 6
38,0 CTRS
Fixing Hole Details
ø5,5 - 2
PLACES
ø12,0
CONCEALED FIXING
MS THREAD
-FIXING SCREWS
SUPPLIED
Dimensions
30
48
115
86
60
2 THICK PLATE
27,5
BRACKET (FINISH)
BRIGHT CHROME PLATED STEEL
AS STANDARD OR STAINLESS
STEEL ON REQUEST
PADLOCK
(NOT SUPPLIED)
Ordering Details
1 / 2
AS S EMB LY
MOD EL
3
4
5 / 6
L
8
P
7 / 8
9 / 10
H
K E Y SE R IE S
12
C ON C E ALED FIXIN G
-
-
FIN ISH
N ON -LOC K IN G
3
MOV E MEN T
SP IN D LE TYP E
B R IGH T C H R OME
S
90 D E GR E ES C LOC K WIS E TO U N LOC K
A
90 D E GR E ES AN TI -C LOC K WIS E TO U N LOC K
E
C AM TYP E
EX AMPLE:
11
A
A/ H
L
8
P / -
-/
3
A/ E
*
*
-
-
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
FLUSH HANDLE
3 POINT LOCKING
PAGE 3 - 9
(MEASUREMENTS
SHOWN IN MM)
APPLICATIONS
This lock is ideal for hinged doors requiring 3 point locking. The lock assembly is snap-in with rod retention designed to resist
tempering. Application tool available. Part No. M/HFIT/1.
SPECIFICATIONS
Black pan and grip with warm-to-touch surface. Internal z inc alloy locking cell 90 degrees cam rotation.
CODE INFORMATION
KEY SERIES
MOVEMENT
CAM TYPE
F1 = 22 mm cam set back
01
200 combinations
Non-mastered
L = Cam on left edge (as drawn)
02
200
"
Mastered
R = Cam mounted on right edge F2 = 16 mm cam set back
07
500
"
Non-mastered
08
500
"
Mastered
11
2000
"
Non-mastered
12
2000
"
Non-mastered
17
2000
"
Non-mastered
18
2000
"
Mastered
CL
Keyed Alike specific combinations
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
F
1
A
7/ 8
9 / 10 11 12
A
H
*
KEY SERIES
*
MOVEMENT
6
*
CAM TYPE
EXAMPLE:
A/ H
F
1
A/ *
*/
6
*/
-
*
*
-
*
*
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
FLUSH HANDLE CODES
PAGE 3 - 10
Flush Handle codes for the new Plastic Flush Handle
A/HF1A/02/6L/-F1
A/
-
-
-
-
-
-
-
-
-
Assembly
H
-
-
-
-
-
-
-
-
Handle
-
-
-
-
-
-
-
-
Flush
1
-
-
-
-
-
-
-
New Plastic Model
Option W = Dust covered barrel
A/
-
-
-
-
-
-
Plain Pan
Option X = Pan with label panel (or
personalised to have specific detail)
02/ -
-
-
-
-
Key Series
Options 01, 07, 08, 17, 18 nonlocking (11, 12, CL, ES to follow)
6
-
-
-
-
Black Pan/Black Grip
Options colour variatons by specific
detail
L/
-
-
-
Cam on Left
Option R = Cam on right
-
-
-
Fixing Detail
Option W = Wood fix, P = IP rated
(panel thickness to be specified)
Cam Detail (22 mm
set back)
Option F2 = 16 mm set back
F1 Note:
Panel cut-out details are the same as previous product
Bar retainer detail has overcome any screw issues
No need for additional spring clip to be fitted
Barrel exchange facility available as an optional extra (A/HF1Z/** not available personalised)
Locking in the open position standard
Personalisation available as an optional exta, except when barrel exchange is required
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 4 - 1
SECTION 4 - HANDLE
ACCESSORIES
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
HANDLE CAM OPTIONS
PAGE 4 - 2
Material
ZINC
Ordering Details
A/DCAM/99/0-/---
Dimensions
68,0
10,0
34,0
15,0
17,0
R9
8,0 SQUARE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
M8
THREAD
MARCH 2003
UNIVERSAL 3 POINT LOCKING
HANDLE MECHANISM
PAGE 4 - 3
Dimensions
Ordering Details
PART CODE
NOMINAL DOOR
HEIGHT
DIMENSION 'H'
A/H3PU/12
1220 (4'0")
1260
A/H3PU/15
1525 (5'0")
1560
A/H3PU/18
1830 (6'0")
1880
A/H3PU/21
2135 (7'0")
2175
A/H3PU/24
2440 (8'0")
2480
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
UNIVERSAL 3 POINT LOCKING
HANDLE MECHANISM
PAGE 4 - 4
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 5 - 1
SECTION 5 - CAMLOCKS
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
CAM LOCK
16 MM
PAGE 5 - 2
ø19,1
MIN
Fixing Hole Details
16,0
MIN
ROUND FACE
(MODEL A/CR16)
SQUARE FACE
(MODEL A/CS16)
Dimensions
24,0
ø19
6,9 16,0
22,5
24,0
FIXING
NUT
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
7/ 8
9 / 10 11 12
C
R
1
6
ROUND FACE
C
S
1
6
SQUARE FACE
A
KEY SERIES
0
1
C
L
FINISH
92268
CL001
3
MOVEMENT
BRIGHT CHROME
B
CAM TYPE
EXAMPLE:
A/ C
R
1
6/ 0
1/ 3
B/ N
180 DEGREES CLOCKWISE OR ANTI -CLOCKWISE TO UNLOCK
0
4
0
4
OTHER CAMS AVAILABLE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
CAM LOCK
19 MM
PAGE 5 - 3
ø19,1
MIN
Fixing Hole Details
16,6
MIN
ROUND FACE
(MODEL A/CR19)
SQUARE FACE
(MODEL A/CS19)
Dimensions
19,8
25,4
ø19
4,7
25,4
22,2
FIXING
NUT
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
7/ 8
9 / 10 11 12
C
R
1
9
ROUND FACE
C
S
1
9
SQUARE FACE
A
KEY SERIES
0
1
92268
C
L
CL001
FINISH
3
MOVEMENT
BRIGHT CHROME
B
CAM TYPE
EXAMPLE:
A/ C
R
1
9/ 0
1/ 3
B/ N
180 DEGREES CLOCKWISE OR ANTI -CLOCKWISE TO UNLOCK
0
4
0
4
OTHER CAMS AVAILABLE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
CAM LOCK
32 MM
PAGE 5 - 4
ø19,1
MIN
Fixing Hole Details
16,6
MIN
ROUND FACE
(MODEL A/CR32)
Dimensions
32,0
ø19
4,7
22,2
FIXING
NUT
Ordering Details
1/ 2
ASSEMBLY
MODEL
3
4
5/ 6
R
3
2
7/ 8
9 / 10 11 12
A
C
KEY SERIES
ROUND FACE
0
1
0
1
FINISH
92268
CL001
3
MOVEMENT
BRIGHT CHROME
B
CAM TYPE
EXAMPLE:
A/ C
R
3
2/ 0
1/ 3
B/ N
180 DEGREES CLOCKWISE OR ANTI -CLOCKWISE TO UNLOCK
0
4
0
4
OTHER CAMS AVAILABLE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 6 - 1
SECTION 6 - HINGES
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
HINGE
FLAT END
Pin Type
PAGE 6 - 2
Material
16
40
BODY:
SOLID BRASS - CHROME-PLATED
PIN:
DIA. 6 STAINLESS STEEL
SCREWS: M6 X 8 - 4 PER ASSEMBLY
HEXAGON HEAD POZI DRIVE
6,5
13
25
40
28,5
25
6,5
16
12
I/D81-/--/3(ALSO AVAILABLE IN BLACK)
I/D18-/--/8-
12
I/D82-/--/3-/-16
40
28,5
40
28,5
6,5
6,5
40
40
19
19
12
I/D83
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
12
A/D831
MARCH 2003
HINGE
DOME END
Pin Type
PAGE 6 - 3
Material
BODY:
PIN:
SCREWS:
SOLID BRASS - CHROME PLATED
DIA. 6 STAINLESS STEEL
M6 X 8 - 4 PER ASSEMBLY
HEXAGON HEAD POZI DRIVE
16
6,5
13
25
40
30
46
28,5
25
30
6,5
40
46
16
A/D01
12
A/D02
12
16
46
40
6,5
28,5
40
46
28,5
6,5
40
40
46
46
19
19
12
12
A/D03
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
A/D031
MARCH 2003
HINGE
GRADE 316 - STAINLESS STEEL
PAGE 6 - 4
Alternative Fixing - Pin Type
Material
BODY:
PIN:
SCREWS:
STAINLESS STEEL, GRADE 316, HAND-POLISHED
DIA. 6, STAINLESS STEEL
M6 STAINLESS STEEL, HEXAGON HEAD, POZI DRIVE ,
4 SUPPLIED PER ASSEMBLY
Ordering Details
Details:
ID81-/--/SS/---
Dimensions
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
HINGE
SPECIAL
PAGE 6 - 5
Alternative Fixing - Pin Type
Material
BODY:
PIN:
SCREWS:
SOLID BRASS - CHROME PLATED
DIA. 6 STAINLESS STEEL
M6 X 8 - 4 PER ASSEMBLY
HEXAGON HEAD, POZI DRIVE
Dimensions
30
24
5
30
9,5
20
30
30
5
30
10
A/D86
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
HINGE
OFFSET - BRASS
PAGE 6 - 8
Alternative Fixing - Pin Type
Material
BODY:
PIN:
SREWS:
SOLID BRASS, CHROME-PLATED
DIA. 6, STAINLESS STEEL
M6, HEXAGON HEAD, POZI DRIVE
4 SUPPLIED PER ASSEMBLY
CODE:
I/D84
SUITABLE FOR SEALING RUBBER
CODE: M/RUBS/12/11/-SC
Ordering Details
Details:
M/RUBS/12/11/-SC
Dimensions
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 7 - 1
SECTION 7 - RUBBER
EXTRUSIONS
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SEALING STRIP
SECTIONS
PAGE 7 - 2
Material
NEOPRENE RUBBER
'U' TYPE
BULL NOSE
'V' TYPE
Dimensions
C
B
A
Ordering Details
PART CODE
TYPE
DIM A
DIM B
DIM C
M/RUB1/06/V-/---
V
10.5
1.5 TO 2
6
M/RUB0/75/U-/---
U
7.5
0.9 TO 1.4
5
M/RUB2/56/B-/---
BULL NOSE
25
6
-
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SEALING STRIP
SELF-GRIPPING
Material
PAGE 7 - 3
EPDM
ROLL SIZE 50 METRES
LONG
8,5
11,5
10
COMPRESSION
< 3,5
SPRING STEEL
CORED
0,8 ~ 2,5
CODE: M/RUBS/06/10/-SC
CODE: M/RUBS/12/11/-SC
11
11
13
10
11
21
COMPRESSION
<5
SPRING STEEL
CORED
1 ~ 3,5
CODE: M/RUBS/15/13/-SC
COMPRESSION
<6
1 ~ 3,5
SPRING STEEL
CORED
CODE: M/RUBT/11/21/-SC
7,5
17
8,5
COMPRESSION
< 3,5
SPRING STEEL
CORED
1 ~ 3,5
CODE: M/RUBT/16/08/-SC
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
SEALING STRIP
SELF-ADHESIVE
PAGE 7 - 4
Material
PVC NITRILE
Dimensions
B
A
Ordering Details
PART CODE
DIM A
DIM B M/ROLL
M/RUB0/84/SH/---
8
4
16.5
M/RUB0/93/SH/---
9
3
25.0
M/RUB0/96/SH/---
9
6
12.5
M/RUB1/21/SH/---
12
12
7.0
M/RUB1/23/SH/---
12
3
25.0
M/RUB1/26/SH/---
12
6
12.5
M/RUB1/53/SH/---
15
3
25.0
M/RUB1/56/SH/---
15
6
12.5
M/RUB1/83/SH/---
18
3
25.0
M/RUB1/86/SH/---
18
6
12.5
M/RUB2/03/SH/---
20
3
25.0
M/RUB2/06/SH/---
20
6
12.5
M/RUB2/43/SH/---
24
3
25.0
M/RUB2/46/SH/---
24
6
12.5
M/RUB3/06/SH/---
30
6
12.5
M/RUB3/56/SH/---
35
6
12.5
OTHER SIZES AVAILABLE
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
WINDOW RUBBER
PAGE 7 - 5
THIS PRODUCT IS USED FOR INSTALLING WINDOWS INTO SHEETMETAL PANELS.
THIS IS DONE BY FOLLOWING THESE STEPS:
1.
FIT PANELS TO THE SLOTS IN THE WINDOW RUBBER.
2. FIT THE LOCKING STRIP TO THE WINDOW RUBBER (THIS PREVENTS THE
WINDOW RUBBER FROM SPREADING APART, KEEPING THE WINDOW
SECURELY LOCATED).
Locking
Strip
3 - 4mm
1 - 2mm
Window
Rubber
Locking Strip
Fitted to Window
Rubber
ACTUAL
SIZE
Ordering Details:
8 - 9mm
M/RUBW/12/34/8-9
Locking
Strip
ACTUAL
SIZE
35mm
1 - 2mm
Window
Rubber
Locking Strip
Fitted to Window
Rubber
3 - 4mm
Ordering Details:
M/RUBW/12/35/3-4
Locking
Strip
5 - 6mm
1 - 2mm
Window
Rubber
Locking Strip
Fitted to Window
Rubber
6 - 7mm
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
ACTUAL
SIZE
Ordering Details:
M/RUBW/12/56/6-7
MARCH 2003
RUBBER & SPONGE
PVC/EPDM - SELF-GRIPPING
PAGE 7 - 6
66-059
Black
66-036/1
66-036/2
66-036/3
66-036/4
66-036/5
Charcoal
Black
Brown
Tan
Grey
66-055
Black
66-035
Black
66-081
Black
66-037
Black
66-056
Black
60-054
Black
60-800 Camel
60-801 Charcoal
60-802 Blue Grey
66-058
Black
66-800S Camel
60-801S Charcoal
60-802S Blue/Grey
ALL THE ABOVE SUPPLIED IN 50 M COILS
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
PAGE 8 - 1
SECTION 8 - SWITCHBOARD
ACCESSORIES
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
D PULL HANDLE
PAGE 8 - 2
Material
ø9,5
BRASS/CHROME-PLATED
5/32" BSW
THREAD
ø9,5
ø8,0
152
M5
THREAD
75
101
5/32" BSW
THREAD
34
PART CODE
A/DHAN/03/0-/---
38
PART CODE
A/DHAN/04/0-/---
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
38
PART CODE
A/DHAN/06/0-/---
MARCH 2003
D TYPE HANDLE
PAGE 8 - 3
Material
ZINC/CHROME-PLATED
Dimensions
5,0
30,0
6,0
106,0
=18,0
=
ø6,5 CSK ø9.5 x 90°
130,0
150,0
PART CODE
A/HDP-/3-/--/---
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
THUMB SCREW
PAGE 8 - 4
Material
STEEL/CHROME-PLATED
Dimensions
8,5
ø19,5
26
48
STRAIGHT
KNURL
RETAINING
RING
M6 x 1 OR M8 x 1.25
Ordering Details
THREAD
CODE
6 MM
T/NURL/M6/3-/W--
8 MM
T/NURL/M8/3-/W--
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
BUDGET LOCK
PAGE 8 - 7
Applications
THIS IS A RUGGED AND ECONOMICAL LOCK
SUITABLE FOR MEDIUM TO HEAVY STEEL
DOORS.
TO OPERATE THE LOCK, A 'T' SHAPED KEY
CAN BE PURCHASED SEPARATELY.
LEFT HAND AND RIGHT HAND VERSIONS OF
THE LOCK ARE AVAILABLE.
Dimensions
Ordering Details
M /B U D L /--/1 -/---
LE FT H AN D LOC K
M /B U D R /--/1 -/---
R IG H T H A N D L O C K
M /B U D K /--/1 -/---
KEY
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
DOOR STAY
STAINLESS STEEL
PAGE 8 - 8
Material
STAINLESS STEEL
NOTE: HOLDS DOOR OPEN AT 90° AND 120°
Dimensions
126
80
295
10
48
266
Ordering Details
CODE
DOOR OPENING
D/STAY/LH/SS/---
LEFT HAND HINGED
D/STAY/RH/SS/---
RIGHT HAND HINGED
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003
DOOR STAY
MILD STEEL
PAGE 8 - 9
Material
MILD STEEL
NOTE: HOLDS DOOR OPEN AT 90° AND 120°
Ordering Details
DOOR OPENING
CODE
UNIVERSAL MOUNTING
1087-U1
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
MARCH 2003