R
Full-Line Catalog
America’s Most
Complete
Locker Line®
www.ListIndustries.com
Made in
America
Since 1936
Industry Innovator in Product Design
America’s Most Complete Locker
Line®
List Industries Incorporated was founded by my
grandfather, Max H. List in 1936 with the idea that
customer satisfaction and product quality would
be the basis for success.
Herb List
CEO
JR List
President
This philosophy has continued for more than
70 years through the efforts of my father, Herb
List, CEO, as we grew to become the industry
leader. Today, as I look back on the past 25 years
that I have been involved with List Industries as
Vice-President of Manufacturing and for the
past 6 years as company President, I am proud
to say that my grandfather's ingredients for
success have given me a strong foundation both
personally and professionally needed to lead List
Industries into the future.
From the first locker to roll out the door of my
grandfather's factory in Chicago, Illinois to the
thousands of lockers now manufactured daily in
our Deerfield Beach, Florida, facility, we dedicate
ourselves to providing the highest quality lockers
in the industry.
With our on-going commitment to excellent
customer service, you will not find a more
qualified company to serve your locker needs.
As we approach a new era in facility
planning, our engineering team is hard at work to
continue the level of excellence which began
in my grandfather's small factory in Chicago,
Illinois more than 70 years ago. As an
innovator and industry leader in product design and
development, List Industries continues to lead the
way into the future.
The fully-framed all-welded Hollow-T frame,
recessed handles, single-point (no moving
parts) latching mechanisms, upgraded hinges,
reinforced doors, Safety-View (see-thru door)
lockers and school metal cubbies are but
a few of the innovative ideas that provide our
customers with the best locker solutions.
The latest addition to our locker line is The
Recruiter™. This is a furniture quality wood
sport locker, made in our own factory to the
same high standards you've come to expect.
Choose from our designs or work with our
designers to create your own special design.
While the rest of the industry continues to flatter
us by following in our footsteps, our research
and development team together with our
engineering team are already working on new
products and innovations to separate us from our
competition and ensure that we remain "America's
Most Complete Locker Line®".
JR List
President
table of contents
Company Spotlight
What Are Fully-Framed All-Welded Lockers?
Inside Our Fully-Framed All-Welded Production Lockers
Locker Specification Chart
Fully-Framed All-Welded Production Lockers
All-Star Sport Lockers
Varsity, Jr. Varsity & Intramural Team Athletic Lockers
P.E. Athletic Lockers
Marquis Champion Athletic Lockers
Graduate Corridor Lockers
Marquis Protector Corridor Lockers
TA-50 Equipment Manager
Unibody All-Welded Production Lockers
TaskForceXP Emergency Response Lockers
Classmate Corridor Lockers
Booksafe III Corridor Lockers
All-welded School Cubbies
Knock-Down (KD) Production Lockers
Classic KD Wardrobe Lockers
Classic KD Box lockers
Classic KD Specialty and Sixteen Person Lockers
Quiet and Whisper Quiet KD Lockers Heavy-Duty Corridor (HDC) KD Lockers Marquis Student KD Lockers
Safety-View & Safety-View Plus KD Lockers
Heavy-Duty Ventilated (HDV) KD lockers
Wood Lockers
The Recruiter Wood Lockers
Plastic Lockers
DuraTech Plastic Lockers
2
4
5
6 8
12
14
18
20
22
24
26
28
30
32
34
35
36
38
40
42
44
46
48
52
Benches, Pedestals and Locks
Locker Accessories
Know Your List lockers Color Selection
Shelving, Storage and Gates Hi-Tech Open & Closed Shelving
Hi-Tech H-Post Shelving
Hi-Tech Shelving Specifications
DuraTech Pass-Thru Industrial Grade Steel Shelving
Rivetwell Boltless Steel Shelving
Superior Portable Gates
800 Series Heavy-Gauge KD Cabinets
Superior Bulk Storage Lockers (BSL)
QUICK-SHIP PROGRAM (All products that follow ship in 5 days) Classic KD Wardrobe & Box Lockers
Maintenance-Free Quiet & DigiTech Lockers
TaskForce XP & Gavanite Corrosion Resistant Lockers
ReadyBuilt & ReadyBuilt II
MedSafe, SafetView and SafetyView Plus Lockers
ValueMax & Heavy-Duty ventilated (HDV) Lockers
DuraTech Plastic, Food Industry and Space Cube Modular Plastic Lockers
MaxView & Welded Single-Point Lockers
Open Gear & SecurityMax Lockers
Bulk Storage (BSL), Portable Gates & Rivetwell Boltless Steel Shelving
Hi-Tech Industrial Grade Steel Shelving & DuraTech Steel Shelving
800 Series Heavy-Duty KD Cabinets & DuraTough Steel Cabinets
The Recruiter Wood Lockers
Benches, Pedestals, Locks & Locker Accessories
Back Cover
54
55
56
57
58
64
66
68
72
80
81
82
84
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
state-of-the-art technology
America’s Most Complete Locker Line®
Superior Lockers by List Industries Inc. are manufactured in
our state of the art facility located in Deerfield Beach, Florida.
This modern, highly efficient facility is situated in a beautiful
industrial park shared by several nationally known firms. With
the completion of our plant expansion, we have nearly 30% of
increased manufacturing and office space allowing room for
the installation of five million dollars worth of new computer
controlled fabricating, roll forming and powder coat finishing
systems assuring consistent, quality workmanship. With our
current million dollar plus, automatic, numerically controlled,
quick color change finishing system we are now able to offer
24 standard designer powder coat applied colors and the
industry's highest quality and most durable paint finish.
From initial design to manufacturing and finish, Superior
lockers by List Industries Inc. are engineered using state of
the art computer technology ensuring quality on which you can
depend.
The uniqueness of our Hollow-T framing system allows us
the flexibility to custom design a locker to meet the specific
requirements of your project. Our complete line of All-Star sport
lockers gives you twelve standard configurations per size
before adding standard options to further meet your needs (see
page 8) and is considered the best steel sport locker available
today.
This catalog depicts just a few of the endless design
possibilities when you choose Superior fully-framed lockers. It
also includes other product lines, all manufactured to the same
high standards you have come to expect. We welcome the
opportunity to work directly with you to custom design a locker
room environment that is productive, attractive while at the
same time cost efficient.
Our results driven team of designers, engineers and sales
professionals are available to assist you every step of the way,
from initial budget planning to final project closeout.
From our corporate headquarters in Florida, our national
distribution center in Apopka, to our four strategically located
regional distribution centers, List
Industries Inc. leads the way in
quality and professional service.
Add to that our ten regional sales
offices located throughout the
United States and our network
of more than 5,000 authorized
distributors worldwide, we will
provide the quality service you
deserve.
DEERFIELD BEACH, FLORIDA FACILITY
Made in America Since 1936
America’s Most Complete Locker Line®
SUPERIOR® fully-framed all-welded lockers
Guaranteed to last a lifetime. Our lifetime warranty is standard for all fully-framed all-welded lockers.
Call 1-800-776-1342 for additional details or a written copy of our lifetime warranty.
Our $1 million dollar
continuous Hollow-T frame
roll forming line is key to
our quality and efficiency.
No locker available on the market today is manufactured to measure up to the strict
specifications of SUPERIOR lockers. We carefully choose top quality steel and finish with a high
grade of powder coat paint to ensure every locker leaving our facility will endure the wear and tear
usually associated with athletic lockers. Rest assured your lockers will receive our fullest
attention to detail. That is why we feel confident enough to provide our lifetime warranty on all
fully-framed all-welded lockers as standard.
Steps 1-4 show the creation of our unique Hollow-T tubular frame.
STEP 1 - We start with top
quality prime grade steel.
STEP 2 - The steel is precision
punched on our state-of-the-art
continuous roll former.
STEP 3 - The frame is rolled into a
structural 6-bend channel shape.
STEP 4 - The result is the
industry’s strongest and most
versatile frame...The Hollow-T.
Steps 5-8 show THE unique manufacturing process OF our fully-framed all-welded lockers.
STEP 5 - The expanded metal STEP 6 - 11 gauge heavy-duty latch
is enclosed on all four sides by the hooks are MIG welded to the side
assembly.
Hollow-T frame.
STEP 7 - Care is taken to insure
all joints are properly fitted and
aligned prior to final welding.
STEP 8 - The unit is securely
MIG welded to create an integral
multiple column locker unit.
Superior® Fully-Framed All-Welded
Athletic Lockers now feature
SafeMesh84™,the industry’s
strongest and safest expanded metal.
RIGIDITY:
84% more steel ensures
a more rigid unit
STRENGTH:
84% more steel
than 3/4” mesh
SAFETY:
Smaller 1/2” mesh
design keeps fingers out
SECURITY:
Reduces risk of loss, theft
and content damage
1/2” 13 Gauge
Flattened Expanded Metal
3/4” 13 Gauge
Flattened Expanded Metal
America’s Most Complete Locker Line®
inside our fully-framed all-welded lockers
Our unique fully-framed all-welded locker utilizes a 16 gauge roll formed tubular framing
member we call the Hollow-T. The locker diagram below lets you see the backbone of the
sturdiest and most durable locker in the industry.
1 16 gauge Hollow-T tubular frame members run top to bottom at all
8 13 gauge 1/2” diamond pattern, flattened expanded metal sides are
2 16 gauge double channel horizontal frame members run front to
9 14 gauge doors
four corners of each locker column.
back at top and bottom.
enclosed on all four sides by the Hollow-T framing system
Actual Unit Widths For Fully-Framed All-Welded Lockers
3 14 gauge galvanneal horizontal channel base frame members, front
and back, run continuous across a multiple column locker unit.
Column WIDTH
4
16 gauge galvanneal bottom & intermediate shelves are locked into
frame at all four corners and securely MIG welded.
5 Heavy-duty 13 gauge 7 knuckle
3-1/2” hinges.
6 11 gauge MIG welded latch hooks with
large riveted-on bumper.
1
9''
12''
15''
18''
24''
30"
33"
36"
48"
1
10-1/8''
13''
16''
18-7/8''
24-3/4''
30-5/8"
33-5/8"
36-1/2"
48-1/4"
7 18 gauge solid back
Columns per UNITS
2
3
4
18-7/8'' 27-5/8'' 36-3/8''
24-3/4'' 36-1/2'' 48-1/4''
30-5/8'' 45-3/8''
60''
36-3/8''
54''
48-1/4''
-
5
45-1/4''
60''
-
6
54''
-
8
7
4
4
5
6
3
9
9
1
1
8
7
1
1
8
7
4
3
3
14 gauge galvanneal horizontal
channel base frame members run
continuous across full width of
multiple column unit at front and back.
3
2
SUPERIOR fully-framed locker
bottoms are a full 2-3/4” above
finished floor.
3
The exclusive
fully-framed
all-welded
Hollow-T frame
provides the
necessary
strength and
rigidity
needed to
withstand a
lifetime of
locker use.
LOCKER SPECIFICATION CHART
America’s Most Complete Locker Line®
Locker Type
catalog
code
Classic KD Wardrobe Lockers, 12” wide and wider
SK
Classic KD Wardrobe Lockers, 9” wide
SK
Classic KD Wardrobe Lockers, 12” wide and wider with MAX Body Option1
SK
Classic KD Wardrobe Lockers, 9” wide with MAX Body Option1
SK
Classic KD Two-Person Lockers
SK
Classic KD Two-Person Lockers with MAX Body Option1
SK
Classic KD Duplex Lockers
SK
Classic KD Duplex Lockers with MAX Body Option1
SK
Classic KD Box Lockers includes 16-Person & 4-wide wall mount
SK
Classic KD Box Lockers with MAX Body Option1
SK
Standard Quiet KD Wardrobe Lockers, 12” wide and wider
SQ
Standard Quiet KD Wardrobe Lockers, 9” wide
SQ
Standard Quiet KD Wardrobe Lockers, 12” wide & wider with MAX Body
SQ
Option1
1
Standard Quiet KD Wardrobe Lockers, 9” wide with MAX Body Option
SQ
Whisper Quiet KD Wardrobe Lockers, 12” wide and wider
WQ
Whisper Quiet KD Wardrobe Lockers, 9” wide
WQ
Whisper Quiet KD Wardrobe Lockers, 12” wide & wider with MAX Body Option1 WQ
Whisper Quiet KD Wardrobe Lockers, 9” wide with MAX Body Option1
WQ
HDC KD Wardrobe Lockers
HDC
HDC KD Wardrobe Lockers with MAX Body Option1
HDC
HDC Premier Wardrobe Lockers
HDCP
HDC Premier Wardrobe Lockers with MAX Body Option1
HDCP
Marquis Student Wardrobe Lockers
LMS
Marquis Student Wardrobe Lockers with MAX Body Option1
LMS
HDV KD Wardrobe Lockers
HV
HDV Premier KD Wardrobe Lockers
HVP
HDV KD Box Lockers
HV
Marquis HDV KD Wardrobe Lockers
LMH
Safety-View KD Wardrobe Lockers
SV
Safety-View Plus KD Box Lockers includes 16-Person & 4-wide wall mount
SVP
Galvanite KD Wardrobe Lockers
GK
Galvanite KD Box Lockers
GK
Team Athletic Wardrobe Lockers
LWA
Team Premier Athletic Wardrobe Lockers
LPA
Turn-Handle Team Athletic Wardrobe Lockers
LWT
Turn-Handle Team Premier Athletic Wardrobe Lockers
LPT
PE Athletic Box Lockers (Top Hinge)
LWA
PE Premier Athletic Box Lockers (Side Hinge)
LPA
Marquis Champion Athletic Lockers
LMC
All-Star MVP Open-Front Sport Lockers
AS
Wallet Security Box
12” Wide Security Box
Full-Width Security Compartment
Foot Locker
Equipment Manager - Double Door Lockers
EM
Graduate Corridor Lockers
LWC
Graduate Premier Corridor Lockers
LPC
Marquis Protector Corridor Lockers
LMP
Classmate Corridor Lockers
LUC
Classmate Premier Corridor Lockers
LUP
Booksafe III Corridor Lockers
BSIII
LEGEND:
Body
construction
Door
Gauge/
Material
Ventilation
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
16 CRS
18 CRS
16 CRS
18 CRS
18 CRS
18 CRS
18 CRS
18 CRS
18 CRS
18 CRS
16 CRS
18 CRS
Louvered
Louvered
Louvered
Louvered
Louvered2
Louvered2
Louvered
Louvered
Louvered
Louvered
Plain
Plain
Knock Down
16 CRS
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Knock Down
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Fully-Framed All-Welded
Unibody All-Welded
Unibody All-Welded
Unibody All-Welded
18 CRS
16 CRS
18 CRS
16 CRS
18 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
16 CRS/Poly3
1/8” Poly4
16 Galv
18 Galv
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
Open Front
16 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
14 CRS
Door
Ventilation options
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Door
Sound
Stiffener Deadening
panel
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Plain
No
No
Plain
Plain
Plain
Plain
Plain
Louvered
Louvered
Louvered
Louvered
Plain
Plain
Diam Perf
Diam Perf
Diam Perf
Diam Perf
Plain
Plain
Louvered
Louvered
Diam Perf
Diam Perf
Diam Perf
Diam Perf
Diam Perf
Diam Perf
Diam Perf
N/A
Plain
Plain
Sec-Plus
Plain
Diam Perf
Louvered
Louvered
Plain
Louvered
Louvered
Plain
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
No
No
No
No
Yes
No
Yes
No
Yes
Yes
N/A
No
No
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Louvered, Sec-Plus, Diam Perf
Louvered, Sec-Plus, Diam Perf
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Plain, Sec-Plus
Louvered, Sec-Plus, Diam Perf
Louvered, Plain, Diam Perf
Front has Security Plus vents
Louvered, Plain, Sec-Plus
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Louvered, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Plain, Sec-Plus, Diam Perf
Louvered, Sec-Plus, Diam Perf
Hinges
Material
• 3-1/2”: 13 gauge 7-knuckle hinges, riveted to frame, welded to door
• CRS: Cold roll sheet steel
• Piano: 16 gauge continuous piano hinge, riveted to frame, welded to door
• GALV: Galvanneal corrosion resistant sheet steel
• Top Hinged: 3/16” continuous hinge rod-concealed, riveted to door behind number plate
• EXP MTL: 13 gauge 1/2” flattened expanded metal
Handles
VENTILATION
• Drawn: Seamless deep drawn stainless steel recessed handle
• DIAM PERF: Diamond perforated
• Padlock Hasp: Projecting spring-bolt latch with padlock hasp
• PLAIN: No louvers
• Finger Pull: Thru-the-door projecting padlock hasp with finger pull
• SEC PLUS: Security Plus™ door ventilation
• Turn-Handle: Projecting 3-point Cremone Handle with 3/8” diameter lock rods
• LOUVERED: 3” louvers
engaging frame at top, bottom and jamb
America’s Most Complete Locker Line®
Hinge
Type
Top
Gauge
Bottom
Gauge
Hat/Int
Shelf
Gauge
No
No
No
No
No
No
No
No
No
No
No
No
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga CRS
18 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
24 Ga CRS
24 Ga CRS
No
No
Diam Perf
Diam Perf
No
Diam Perf
No
Diam Perf
No
Diam Perf
No
No
No
No
No
No
No
No
No
No
No
No
No
No
16 Ga CRS
No
16 Ga CRS
16 Ga CRS
16 Ga CRS
18 Ga CRS
Diam Perf
No
16 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga Galv
24 Ga Galv
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
16 Ga CRS
16 Ga CRS
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
18 Ga CRS
18 Ga CRS
18 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
No
No
No
No
No
No
No
No
No
No
No
Diam Perf
Diam Perf
Diam Perf
Diam Perf
No
No
No
No
Exp Metal
Exp Metal
Exp Metal
Exp Metal
Exp Metal
Exp Metal
Exp Metal
Exp Metal
No
No
Exp Metal
Exp Metal
Exp Metal
No
No
No
No
No
No
16 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga Galv
24 Ga Galv
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
14 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga Galv
24 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga Galv
24 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga Galv
16 Ga CRS
16 Ga CRS
16 Ga CRS
18 Ga CRS
24 GA CRS
24 Ga CRS
18 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
24 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
24 Ga CRS
24 Ga CRS
24 Ga Galv
24 Ga Galv
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
16 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
18 Ga CRS
Diam Perf
No
No
Diam Perf
Diam Perf
No
Diam Perf
No
Diam Perf
No
Diam Perf
Diam Perf
Diam Perf
Diam Perf
Diam Perf
No
No
No
No
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
N/A
N/A
N/A
N/A
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
13 Ga Exp Mtl
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Latching
Type
Handle
Type
Side
Gauge
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Friction Catch
Friction Catch
Lifter
Lifter
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Finger Pull
Finger Pull
Drawn
Drawn
24 Ga CRS
24 Ga CRS
16 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
16 Ga CRS
24 Ga CRS
24 Ga CRS
Piano
Lifter
Drawn
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
Piano
3-1/2”
3-1/2”
3-1/2”
3-1/2”
Top Hinged
3-1/2”
3-1/2”
N/A
Piano
3-1/2”
Top Hinged
Piano
3-1/2”
3-1/2”
3-1/2”
3-1/2”
Piano
Piano
Piano
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Lifter
Single-Point
Single-Point
Lifter
Lifter
Friction catch
Single-Point
Lifter
Friction Catch
Lifter
Friction Catch
Lifter
Lifter
3-Point Positive
3-Point Positive
Spring Bolt
Friction Catch
Single-Point
N/A
Friction Catch
Friction Catch
Spring Bolt
Padlock Loop
3-Point Positive
Lifter
Lifter
Single-Point
Lifter
Lifter
Single-Point
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Finger Pull
Drawn
Drawn
Finger Pull
Drawn
Finger Pull
Drawn
Drawn
Turn-Handle
Turn-Handle
Padlock Hasp
Finger Pull
Drawn
N/A
Finger Pull
Finger Pull
Padlock Hasp
Padlock Hasp
Turn-Handle
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Ventilated
Sides
Back
Gauge
optional optional
Ventilated Integral
Backs Slope Top
FOOTNOTES:
1-MaxOption upgrades standard 24 gauge body components to 16 gauge, back will be 18 gauge
2-Two-Person lockers include plain (Non-louvered) upper box doors. Wardrobe doors are louvered
3-Safety-View lockers include 16 gauge CRS doors with a polycarbonate panel at top and bottom of each door
4-Safety-View Plus lockers include clear polycarbonate doors available in 12” wide x 12” high doors 5-tier, 6-tier, 16 person and 4-wide wall mount only
America’s Most Complete Locker Line®
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
ALL-STAR® FULLY-FRAMED ALL-WELDED SPORT LOCKERS
the Sport Locker that sets the standard
all others must follow...
The All-Star sport locker line represents the highest level of
quality, functionality and durability of any sport locker
currently offered in the market today.
Please contact our inside sales
department at
1-800-776-1342
to discuss how the All-Star can best
meet your locker needs.
Shown with optional
12” wide security box,
stainless steel coat rod
and foot locker/seat.
Both security box sides
are solid.
All-Star lockers feature our exclusive Hollow-T framing system,
1/2” expanded metal sides for maximum ventilation, safety, rigidity
and interlocking body components creating a functional yet sturdy
sports locker guaranteed in writing to last a lifetime.
The versatility of our Hollow-T framing system allows you to customize
a locker to meet your specific requirements.
Shown with optional full
width security
compartment, stainless
steel coat rod and lower
seat/shelf. Both security
compartment sides are
ventilated.
Player Tested and Game Ready!
America’s Most Complete Locker Line®
Shown with optional wallet security
box (7-1/4” wide x 9” deep x 7-1/4”
high), stainless steel coat rod and
lower seat/shelf
Underside of optional foot
locker seat is reinforced to
support today's athlete
Optional stainless steel coat
rod for added convenience.
Also shown is optional
wallet security box.
locker sizes
Widths 12", 15", 18", 24", 30", 33”, 36"
Depths 12", 16", 18", 22"
Nominal Column Heights 60", 72", 84"
Optional seat cushion
Notes:
• Actual locker column height is 2-3/4"
over nominal column heights shown
for 60" and 72" models. 84" high models will be 84" actual.
• All-Star lockers will ship in
multiple column units up to 60" wide
to meet individual jobsite conditions.
See page 5 for actual unit widths.
Optional shoulder pad rack.
Adjustable to meet user's needs.
Base model includes upper
hat shelf and coat hooks
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
ALL-STAR® FULLY-FRAMED ALL-WELDED SPORT LOCKERS
Standard Configurations Designed to Meet Your Locker Needs
BASE MODEL
The versatility of our Hollow-T framing system allows you to customize a locker to meet your specific requirements. Contact our
inside sales department at 1-800-776-1342 to discuss how we can best meet your locker room needs.
ASNN
ASNL
Standard Optional
open lower seat/shelf
area
ASSN
ASSL
Optional
seat/foot
locker
ASSF
Standard Optional
open lower seat/shelf
area
Optional
seat/foot
locker
ASBN
ASBF
ASBL
Standard Optional
open lower seat/shelf
area
Optional
seat/foot
locker
ASTN
ASTF
ASTL
Standard
Optional
open lower seat/shelf
area
10
ASNF
Optional
seat/foot
locker
STANDARD
UPPER OPEN
HAT SHELF
AREA
OPTIONAL
UPPER
WALLET
SECURITY
BOX
OPTIONAL
UPPER
12" WIDE
SECURITY
BOX
OPTIONAL
UPPER
FULL WIDTH
SECURITY
COMPARTMENT
NOTE: All models shown with optional stainless steel coat rod. Two-tone color combinations are available at NO ADDITIONAL CHARGE (See page 57 for color selection)
America’s Most Complete Locker Line®
ALL-STAR® locker specifications
General: Lockers shall Be "Superior Fully-Framed All-Welded All-Star Sport Lockers" as manufactured by List Industries Inc.
or approved equal. All lockers shall be factory-assembled, of all MIG welded construction, in multiple column units to meet job
conditions. Assembly of locker bodies by means of bolts, screws, or rivets will not be permitted. Welding of knockdown locker
construction is not acceptable. Grind exposed welds and metal edges flush and make safe to touch.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit
corrosion, followed by a coat of high grade custom blend powder that is electrostatically sprayed and baked at 350 degrees
Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from manufacturer's standard
list of colors. Two-tone color combination (if optional security compartment included) shall be at no additional cost with the
locker body, frame and trim chosen from one color and the doors or foot locker seat may be one of any other color chosen from
manufacturer’s standard selection.
Frame / Vertical Side Panels: Shall be of 13 gauge 1/2'' flattened expanded metal framed by 16 gauge Hollow-T tubular
sections and channel frame members designed to enclose all four edges of the side panel with the entire assembly MIG welded
to form a rigid frame for each locker.The channel frame members are welded to the front and rear vertical frame members to
create and anchor bearing surface of 1-1/4 inches wide x the depth of the locker at each side panel.
Integral Frame Locker Base: 14 gauge galvanneal sheet steel formed structural channels are MIG welded to the front
and rear vertical side panel frame members to allow placement of locker bottom a minimum 2-3/4" above floor level. Locker
bottom shelf located less than 2" above floor level will not be acceptable.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded to each
vertical side panel frame member and be continuous to cover the full width of a multiple frame locker unit.
Hat Shelf and Bottoms: Shall be 16 gauge galvanneal sheet steel, have double bends at front and shall engage slots
in the Hollow-T vertical frame members at all four corners and be securely welded to the frame and side. Locker bottom shelf
located less than 2" above floor level will not be acceptable.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed unit and be welded to each vertical
side panel frame member.
Optional Upper Security Compartment:
Optional Upper Wallet Security Box: Shall be 7-1/4" wide x 9" deep x 7-1/4" high fabricated from 16 gauge cold
rolled sheet steel and include a 14 gauge side hinged solid door. Door hinge shall be a 16 gauge piano hinge. Wallet
Security Box to be securely riveted to the front right corner of hat shelf. Door to have a combination friction catch door pull
with padlock hasp. Padlock Strike Plates are optional.
Optional Upper 12” Wide Security Box: To be formed of 16 gauge cold rolled sheet steel and securely MIG welded
to the right side of hat shelf. The Door is to be 14 gauge cold rolled sheet steel, side hinged. Two heavy-duty 3-1/2 inch
7-knuckle 13 gauge hinges shall be MIG welded to door and riveted to the locker frame. Door to have double bends at
hinge and latch sides. Door is equipped with a Single-Point thru-the-door friction catch finger pull. Padlock Strike Plates
are optional. Doors to be solid (non-perforated).
Optional Upper Full Width Security Compartment: Shall be top hinged and be fabricated from single sheet prime
14 gauge steel with single bend at top and sides with a double bend at latch point (bottom). Door shall be perforated with
Security-Plus ventilation. A spring loaded galvanized latch assembly shall be securely welded to the inside of the door. The
latch shall be a minimum of 11 gauge, be equipped with a stainless steel spring and shall automatically engage when door
is closed. Rubber bumpers shall be riveted to return bends on doors. Locking device shall be designed for use with both
a padlock and built-in lock. Top hinged gym door shall be hinged using a 3/16" diameter continuous hinge rod completely
recessed into the door with a concealed fastener. Padlock Strike Plates are optional.
Optional Lower Seat/Shelf: Shall be 16 gauge galvanneal sheet steel, have double bends at front and shall engage slots
in the Hollow-T vertical frame members at all four corners and be securely welded to the frame and side. A reinforcing bar shall
be welded to the inside of the front return bend for added strength.
Optional Seat/Foot Locker: Seat shall be formed of 14 gauge cold rolled sheet steel with stiffener sections for reinforcement
and be prepared for padlock. Foot Locker front panel shall be 14 gauge cold rolled sheet steel with Security-Plus ventilation.
Rubber bumpers are to be mounted to foot locker to cushion seat when closed. Padlock Strike Plates are optional.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com for lock use
chart and suggested lock application).
Equipment: Furnish each locker with one galvanneal hat shelf and two single prong wall hooks.
Optional Coat Rod: Shall be of 1” diameter, stainless steel tubing, factory attached below upper hat shelf.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials and workmanship
excluding finish, damage resulting from deliberate destruction and vandalism under this section for the lifetime of the facility.
11
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
athletic team FULLY-FRAMED ALL-WELDED LOCKERS
Varsity
Designed with the athlete in mind, Varsity
single tier lockers are highly recommended
for varsity team rooms. Varsity lockers are
engineered to withstand excessive abuse.
These lockers are also excellent in
combination with P.E. lockers (page 12).
Jr. Varsity
Jr. Varsity double tier
athletic lockers are ideal
when budget or space
limitations apply. Double tier
lockers can be used in team
rooms as well as in P.E.
rooms in combination with
P.E. Lockers (page 12).
Intramural
Intramural triple tier athletic
lockers are ideal when space
and/or funds are limited. The
opening height allows clothing
to hang on hooks allowing better
ventilation than a smaller P.E.
locker. Intramural lockers are also
ideal for use in combination with
P.E. lockers (page 12).
standard all-welded wardrobe locker sizes
Single Tier (VARSITY)
Double Tier (JR VARSITY)
Widths 9", 12", 15", 18", 24"
Widths: 9", 12", 15", 18", 24"
Depths 12", 16", 18", 22"
Depths: 12", 16", 18", 22"
Nominal Column Heights: 36”, 48", 60", 72" Opening Heights 24", 30", 36"
Nominal Column Heights 48", 60", 72"
Triple Tier (INTRAMURAL)
Widths 9", 12", 15", 18", 24"
Depths 12", 16", 18", 22"
Opening Heights 20", 24"
Nominal Column Heights 60", 72"
Notes:
• Actual locker column height for fully-framed all-welded only, is 2-3/4"over nominal column heights shown
• All welded lockers will ship in multiple column units up to 60” wide to meet individual job site conditions
• 18’’ & 24’’ Wide All-Welded Lockers are only available in Premier Series (include full height door stiffener)
• See chart on page 5 for actual unit widths of fully-framed lockers
12
Designed With Today's Athlete In Mind
America’s Most Complete Locker Line®
STANDARD
Deep-drawn
stainless steel
recessed handle
with gravity
features
body construction: Fully-framed all-welded Hollow-T construction, 13
gauge 1/2" fully-framed flattened expanded metal sides, 16 gauge continuous
top, 18 gauge solid back, 16 gauge galvanneal bottom
lift-type latching
doors: 14 gauge diamond perforated doors are standard. Plain, louvered and
Security-Plus door styles are available
handle: Deep-drawn seamless stainless steel recessed handle. Optional
projecting 3-point turn-handle is available.
STANDARD
Our rugged
11 gauge MIG welded
latch hook with large
riveted on bumper vs.
common K.D. locker
style latch hook
latching: 11 gauge latch hooks with riveted on bumper MIG welded to
Hollow-T frame. Gravity lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
hinges: Heavy-duty 13 gauge 7-knuckle 3-1/2" hinges:
• 3-hinges per opening 48" high and higher
• 2-hinges per opening 20" high thru 36" high
STANDARD
Our heavy-duty
13 gauge 7-knuckle
3-1/2" hinge vs.
common 2" K.D.
locker style hinge
shelves: 16 gauge galvanneal hat shelf for Varsity openings 60" and 72"
high, 16 gauge galvanneal intermediate shelves
hooks: 2-single hooks and 1-double hook is standard. 1-double hook only for
triple tier and 1-double and 1-single hook for 9" wide openings 30” and higher
warranty: Lifetime
sizes: See chart on page 12 for standard sizes. See page 5 for actual unit widths.
specifications: See page 17 for complete Team and PE locker specifications
3-point projecting turn-handle latching is available
for Varsity, Jr.Varsity and Intramural Team lockers.
Contact factory for turn-handle specifications.
Not available in 9” wide lockers.
Standard for 18” and 24” wide
Premier Series Team lockers include a 3" wide 18 gauge full height door stiffener spot
welded to the inner door face and MIG welded to the hinge side as well as to the top
and bottom door flanges providing a rigid torque-free door. A 1-1/2" wide stiffener
will be furnished for 9" wide Premier Series Team locker doors and optional 12” wide
Premier Series turn-handle style doors.
13
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
P.E. series FULLY-FRAMED ALL-WELDED LOCKERS
Superior P.E. lockers are the perfect
solution when space is at a premium.
Heavy gauge fully-framed all-welded construction combined with modern features and
the design flexibility of our Hollow-T framing system allows you to customize your locker
room environment to be user friendly, maximize space and improve supervision, all without compromising the architectural esthetics of the room. Innovative solutions like our
Gym Class 9E and Gym Class 8D locker configurations are the result of listening to the
needs of coaches and P.E. instructors for more than 70 years.
features
body construction: Fully-framed all-welded
Hollow-T construction, 13 gauge 1/2" fully-framed
flattened expanded metal sides, 16 gauge continuous top,
18 gauge solid back, 16 gauge galvanneal bottom
doors: 14 gauge diamond perforated doors are
standard. Louvered, Security-Plus and plain door styles are
available. Doors 12" high and under are standard with top
hinge. Doors 15" and 18" high are standard with side hinge.
handle/latching: Top hinge doors have a
projecting spring loaded heavy-duty latch/handle with
integral padlock lug. Side hinge doors have a
single-point thru-the-door projecting finger pull handle with
padlock hasp. Optional deep-drawn seamless stainless
steel recessed handle is available for side hinged gym
doors (10" high and higher) and will utilize our Marquis
style thru-the-handle single-point no moving parts
latching and include two 13 gauge 7-knuckle 3-1/2"
hinges
hinges: Top hinge doors use a concealed 3/16" continuous
rod. Side hinge doors use two heavy-duty 13 gauge 7-knuckle
3-1/2" hinges. Optional side hinged doors 8” and 9” high
will have special hinges
Shown with optional
padlock strike plates
NO. A6A (4:1 Ratio)
hooks: None
shelves: 16 gauge galvanneal intermediate shelves
6 tier 3 wide
18 openings
OPTIONAL
Seamless stainless steel
recessed handle is available.
Doors will be side hinged and
will use our Marquis style
single-point thru-the-handle
latching
14
warranty: Lifetime
sizes: See page 15 for standard sizes. See page 5 for
actual unit widths
STANDARD
Projecting spring
loaded latch
is standard on
top hinged gym
doors only
STANDARD
Top hinged doors
with concealed
hinge rod are
standard for
12" high and
under
Versatility, Durability and Superior Quality!
America’s Most Complete Locker Line®
space management with the 9e unit (6:1 ratio)
This unit is a favorite among architects, coaches and physical education instructors across the
country. Superior Class 9E lockers accommodate 12 students in a compact three linear feet of
space utilizing the popular 6:1 ratio replacing the typical "626" combination. The benefit is that
each locker where physical education clothing is stored is a full 18" wide x 8" high. Each
wardrobe locker where height is needed for hanging school clothing is 9" wide x 48" high.
Standard Class 9E unit size is 36-3/8" wide x (12", 16", 18", 22") deep x 74-3/4" high actual All
doors are shown with optional padlock strike plates which protect finish from being marred by
padlock.
space management
with the 8d unit
(5:1 ratio)
Superior Class 8D lockers are
designed with the same
premise as its big brother, the
Class 9E. We have
engineered the finest 5:1 ratio
P.E. unit in the locker industry
utilizing the same floor space as a
standard "525" configuration. This
locker is a nominal 64" high
(66-3/4" actual height) as opposed
to 60". The Class 9E lockers are
18" wide x 8" high and the
wardrobe lockers are 9" wide
x 48" high.
Standard Class 8D unit size is
36-3/8" wide x (12", 16", 18", 22")
deep x 66-3/4" high actual
STANDARD
Side hinged doors
are standard for
15" and 18" high,
optional for doors
12" high and under
STANDARD
Upgrade to Premier
Series P.E. lockers
which include a 3" wide
18 gauge full height
door stiffener and are
side hinged.
NO. 9D
(6:1 Ratio)
9E or 8D Units vs. Typical
626 or 525 Units
18” wide x 8” high
12” wide x 12” high
• Maximizes ventilation for clothing and shoes
• Increases shelf space by 50%
• Adds 12” in height to wardrobe opening
• One gym locker at unit bottom in lieu of two
• 3 latch points & 3 hinges per wardrobe door
instead of 2
Widths for all gym locker openings 12”, 15”, 18”
Depths for all gym locker openings 12”, 16”, 18”, 22”
Tier
4
Tier
to
9
Tier
Four Tier
Five Tier
Six Tier
Seven Tier
Eight Tier
Nine Tier
Opening Heights
8”, 9”, 12”, 15”, 18”
12”, (4) 15” & (1) 12”
8”, 10”, 12”
(6) 10” & (1) 12”
8”, 9”
8”
Nominal Column Heights
32”, 36”, 48”, 60”, 72”
60”, 72”
48”, 60”, 72”
72”
64”, 72”
72”
Notes:
• Actual locker column height for fully-framed all-welded only,
is 2-3/4"over nominal column heights shown
• All welded lockers will ship in multiple column units up to 60” wide
to meet individual job site conditions
• See page 5 for actual unit widths
15
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
choose from 16
combinations to meet your
exact locker needs
No. 61 (6:1 Ratio)
No. 6A (7:1 Ratio)
No. 51 (5:1 Ratio)
No. 525 (5:1 Ratio)
typical superior p.e. locker combinations
The design flexibility of our all-welded athletic lockers allows us to mix and match wardrobe lockers with box lockers
to meet any configuration and/or ratio your facility may demand. Please feel free to contact our Sales Manager at
1-800-776-1342. He will help you create an environment which will be both esthetically pleasing and functional.
No.31-(3:1)
No.61-(6:1)
16
No.62-(3:1)
No.626-(6:1)
No.41-(4:1)
No.82-(4:1)
No.9E-(6:1)
No.A6A-(4:1)
No.6A-(7:1)
No.51-(4:1)
No.5B-(7:1)
No.525-(5:1)
No.5C-(8:1)
No.81-(8:1)
No.8D-(5:1)
No.6B-(8:1)
The Ultimate Welded PE Locker!
America’s Most Complete Locker Line®
team & P.E. LOCKERS specifications (Pages 12-16)
General: Lockers shall Be "Superior Fully-Framed All-Welded Team & P.E. Athletic Lockers" as manufactured by List Industries Inc. or approved
equal. All lockers shall be factory-assembled, of all MIG welded construction, in multiple column units to meet job conditions. Assembly of locker
bodies by means of bolts, screws, or rivets will not be permitted. Welding of knockdown locker construction is not acceptable. Grind exposed welds
and metal edges flush and make safe to touch.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed
by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide
a tough durable finish. Color to be selected from manufacturer's standard list of colors. Two-tone color combination shall be at no additional cost
with the locker body, frame and trim chosen from one color and the doors may be one of any other color chosen from manufacturer’s standard
selection.
Frame / Vertical Side Panels: Shall be of 13 gauge 1/2'' flattened expanded metal framed by 16 gauge Hollow-T tubular sections and channel
frame members designed to enclose all four edges of the side panel with the entire assembly MIG welded to form a rigid frame for each locker.
The channel frame members are welded to the front and rear vertical frame members to create and anchor bearing surface of 1-1/4 inches wide x
the depth of the locker at each side panel.
Integral Frame Locker Base: 14 gauge galvanneal sheet steel formed structural channels are MIG welded to the front and rear vertical side
panel frame members to allow placement of locker bottom a minimum 2-3/4" above floor level. Locker bottom shelf located less than 2" above floor
level will not be acceptable.
Team Wardrobe Doors: Doors 20" high and over are to be fabricated from single sheet prime 14 gauge steel with single bends at top and
bottom and double bends at the sides. The channel formed by the double bend at the latch side is designed to fully conceal the lock bar. Lock
bar shall be hot dip galvanized and installed after door is painted to ensure proper paint coverage and lock bar operation.The latching mechanism
shall be finger lift control type constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon
slide latches shall be completely enclosed in the lock channel allowing doors to close with the lock in the locked position. Locking device shall be
designed for use with either built-in combination locks or padlocks. Latch hooks shall be 11 gauge (minimum) with riveted bumpers and shall be
MIG welded to vertical frame member. Provide three latch hooks for doors 48" and over and two for doors under 48". Doors to be perforated with
5/8" x 1-1/2" diamonds.
P.E. Gym Doors 12" High And Under: Doors 12" high and under to be top hinged and be fabricated from single sheet prime 14 gauge steel
with single bend at top and sides with a double bend at latch point (bottom). A spring loaded galvanized latch assembly shall be securely welded
to the inside of the door. The latch shall be a minimum of 11 gauge, be equipped with a stainless steel spring and shall automatically engage when
door is closed. Rubber bumpers shall be riveted to return bends on doors. Locking device shall be designed for use with both a padlock and built-in
lock. The 12” high door in 72” high 5-tier lockers only, will be furnished side hinged. Padlock Strike Plates are optional. Doors to be perforated with
7/16" x 15/16" diamonds.
P.E. Gym Doors 15" And 18" High: Doors 15" and 18" high to be side hinged and be fabricated from single sheet prime 14 gauge steel with
single bend at top and bottom and double bends at hinge and latch sides. Latching is thru-the-door single-point friction catch door pull. The door
strike is to be MIG welded to the frame. Locking device shall be designed for use with both a padlock and built-in lock. Padlock Strike Plates are
optional. Doors to be perforated with 7/16" x 15/16" diamonds.
Deep Drawn Seamless Stainless Steel Recessed Handle: All wardrobe doors 20" high and over shall have a seamless drawn not less
than 304 stainless steel recessed handle shaped to receive a padlock or built-in combination lock. The recessed handle shall be deep enough to
have the lock be completely flush with the outer door face.
Hinges: Hinges for wardrobe and side hinged gym doors shall not be less than 3-1/2" long 13 gauge 7 knuckle pin type, securely riveted to frame
and welded to the door. Doors are to be secured to frame with a minimum of two tamper resistant rivets per hinge. Provide 3 hinges for doors 48"
and higher and 2 for doors shorter than 48". All doors shall be right hand side hinged except top hinged gym doors as noted above. Top hinged
gym doors shall be hinged using a concealed 3/16" diameter continuous hinge rod attached with a concealed fastener.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded to each vertical side panel
frame member and be continuous to cover the full width of a multiple framed locker unit.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge galvanneal sheet steel, have double bends at front and shall engage
slots in the Hollow-T vertical frame members at all four corners and be securely welded to the frame and side. Locker bottom shelf located less than
2" above floor level will not be acceptable.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed unit and be welded to each vertical side panel frame
member.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one galvanneal hat shelf. One double hook and two single hooks are standard with the following
exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
• Openings 18” high and under: No hooks.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials and workmanship excluding finish,
damage resulting from deliberate destruction and vandalism under this section for the lifetime of the facility.
17
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
marquis® champion all-welded fully-framed athletic lockers
This is the most rugged Team and P.E.
locker available today.
With more than 30 years of experience manufacturing single-point lockers,
Superior Marquis Champion lockers are manufactured to the industry’s
highest standards by incorporating our Hollow-T framing system,
interlocking body components, maintenance-free single-point latching
mechanism, reinforced doors and the industry’s strongest hinges to
deliver a lifetime of satisfaction.
features
body construction: Fully-framed all-welded Hollow-T construction,
13 gauge 1/2" fully-framed flattened expanded metal sides, 16 gauge
continuous top, 18 gauge solid back, 16 gauge galvanneal bottom
doors: 14 gauge diamond perforated doors with a full height 3” wide 18
gauge door stiffener are standard. Plain, louvered and Security-Plus door styles
are available. All doors are side hinged
handle: Deep-drawn single-point seamless stainless steel recessed handle
latching: Single-point maintenance-free quiet latching with 11 gauge MIG
welded latch with pry resistant lug
hinges: Heavy-duty 13 gauge 7-knuckle 3-1/2" hinges:
• 3-hinges per opening 48" high and higher
• 2-hinges per opening 36" high and under
hooks: 2-single hooks and 1-double hook is
standard. 1-double hook only for triple tier and
1-double and 1-single hook for 9" wide openings
30” and higher. No hooks for openings 18" high
and under
shelves: 16 gauge galvanneal hat shelf for
single tier openings 60" and 72" high, 16 gauge
galvanneal intermediate shelves
warranty: Lifetime
sizes: See page 12 and 15 for standard sizes
See page 5 for actual locker unit widths
18
standard - Marquis Champion lockers include a 3" wide 18 gauge full height door
stiffener spot welded to the inner door face and MIG welded to the hinge side as
well as to the top and bottom door flanges providing a rigid torque-free door.
A 1-1/2" wide stiffener will be furnished for 9" wide Marquis doors.
A Tradition Of Excellence
America’s Most Complete Locker Line®
marquis champion locker specifications
General: Lockers shall Be "Superior Fully-Framed All-Welded Marquis Champion Athletic Lockers" as manufactured
by List Industries Inc. or approved equal. All lockers shall be factory-assembled, of all MIG welded construction, in
multiple column units to meet job conditions. Assembly of locker bodies by means of bolts, screws, or rivets will not
be permitted. Welding of knockdown locker construction is not acceptable. Grind exposed welds and metal edges
flush and safe to touch.
STANDARD
Deep-drawn stainless steel
recessed handle with
single-point latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution
to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at
350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors. Two-tone color combination shall be at no additional cost with the locker body,
frame and trim chosen from one color and the doors may be one of any other color chosen from manufacturer’s
standard selection.
Frame / Vertical Side Panels: Shall be of 13 gauge 1/2'' flattened expanded metal framed by 16 gauge HollowT tubular sections and channel frame members designed to enclose all four edges of the side panel with the entire
assembly MIG welded to form a rigid frame for each locker. The channel frame members are welded to the front and
rear vertical frame members to create and anchor bearing surface of 1-1/4 inches wide x the depth of the locker at
each side panel.
Integral Frame Locker Base: 14 gauge galvanneal sheet steel formed structural channels are MIG welded to
the front and rear vertical side panel frame members to allow placement of locker bottom a minimum 2-3/4" above
floor level. Locker bottom shelf located less than 2" above floor level will not be acceptable.
Marquis Champion Wardrobe And Gym Doors: Outer door to be fabricated from single sheet prime 14 gauge
steel with single bends at top and bottom and double bends at the sides with a 3" wide (1-1/2” for 9” wide doors). 18
gauge full height channel door stiffener MIG welded to the hinge side of the door as well as to the top and bottom
door return bends and spot welded to the inside of door face to form a rigid torque-free box reinforcement for the
door. All doors shall be right hand side hinged. Wardrobe doors 20" high and over to be perforated with 5/8" x 1-1/2"
diamonds. Gym doors 18" high and under to be perforated with 7/16" x 15/16" diamonds.
STANDARD
11 gauge single-point latch
is MIG welded to Hollow-T
frame
Marquis Seamless Drawn Stainless Steel Recessed Locker Handle: All locker doors shall have a
seamless drawn not less than 304 stainless steel recessed handle shaped to receive a padlock or built-in combination
lock. The recess pan shall be deep enough to have the lock be completely flush with the outer door face. The pull
handle shall be drawn into the left side of the handle for easy opening of the locker door.
Marquis Latch Assembly: Shall be single point rigid non-moving positive latch by means of a heavy gage
(minimum 11 gage) latch securely welded to the framed vertical divider. The latch assembly must be made of a single
piece of steel and have a padlock loop that inserts through the recess pan. The latch must be able to accept either
a padlock or built-in combination lock. Rubber bumpers shall be securely attached to the door strike.
Door Hinges: Hinges shall not be less than 3-1/2" long 13 gauge seven knuckle pin type, securely riveted to
frame and welded to the door. Doors are to be secured to frame with a minimum of two tamper resistant rivets per
hinge. Provide 3 hinges for doors 48" and higher and 2 for doors shorter than 48". All doors shall be right hand
side hinged.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded
to each vertical side panel frame member and be continuous to cover the full width of a multiple framed locker unit.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge galvanneal sheet steel, have double
bends at front and shall engage slots in the Hollow-T vertical frame members at all four corners and be securely
welded to the frame and side. Locker bottom shelf located less than 2" above floor level will not be acceptable.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed unit and be welded to
each vertical side panel frame member.
Locks (If Required): Shall be master keyed to one system for the entire project. Go to www.ListIndustries.com
for lock use chart and suggested lock application). Padlock only for 9'' wide lockers.
STANDARD
Our heavy-duty 13 gauge
7-knuckle 3-1/2" hinge vs.
a common 2" K.D. locker
style hinge
Equipment: Openings 60" and 72" shall include one galvanneal hat shelf. One double hook and two single hooks
are standard with the following exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
• Openings 18” high and under: No hooks.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for the
lifetime of the facility.
19
America’s Most Complete Locker Line®
graduate fully-framed all-welded corridor lockers
With the addition of solid sides and louvered doors, the industry's best
athletic locker is perfect for corridor applications when maximum strength,
durability and longevity are important. Graduate lockers include our lifetime
warranty, which is standard on all fully-framed all-welded lockers.
The use of our exclusive Hollow-T framing system together with galvanneal
bottom, intermediate and hat shelves where applicable achieves a degree
of excellence previously reserved for high abuse athletic rooms. 14 gauge
doors with a deep-drawn stainless steel recessed handle and 13 gauge
7-knuckle 3-1/2" long hinges are standard. As with all fully-framed all-welded
lockers, interlocking body components for precision alignment are standard
forming one integral multiple column unit up to 60" wide. Upgrade to our
Graduate Premier and you get our full height door stiffener creating a rigid
torque-free door.
features
body construction: Fully-framed all-welded Hollow-T construction, 18 gauge
fully-framed solid sides, 16 gauge continuous top, 18 gauge solid back, 16 gauge
galvanneal bottom
doors: 14 gauge louvered doors are standard Plain, Security-Plus, Safety-View and diamond
perforated door styles are available
handle: Deep-drawn seamless stainless steel recessed handle
latching: 11 gauge latch hooks with riveted on bumper MIG welded to
Hollow-T frame. Gravity lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
hinges: Heavy-duty 13 gauge 7-knuckle 3-1/2" hinges:
• 3-hinges per opening 48" high and higher
• 2-hinges per opening 20" high thru 36" high
shelves: 16 gauge galvanneal hat shelf for single tier
openings 60" and 72" high, galvanneal intermediate shelves
hooks: 2-single hooks and 1-double hook is
standard. 1-double hook only for triple tier and
1-double and 1-single hook for 9" wide openings
30” and higher
warranty: Lifetime
sizes: See page 12 for standard sizes
See page 5 for actual locker unit widths
20
When Durability Is Required
America’s Most Complete Locker Line®
graduate corridor locker specifications
General: Lockers shall Be "Superior Fully-Framed All-Welded Graduate Corridor Lockers" as manufactured
by List Industries Inc. or approved equal. All lockers shall be factory-assembled, of all MIG welded
construction, in multiple column units to meet job conditions. Assembly of locker bodies by means of bolts,
screws, or rivets will not be permitted. Welding of knockdown locker construction is not acceptable. Grind
exposed welds and metal edges flush and make safe to touch.
STANDARD
Deep-drawn stainless steel recessed
handle with gravity lift-type latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed
and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to
be selected from manufacturer's standard list of colors. Two-tone color combination shall be at no additional
cost with the locker body, frame and trim chosen from one color and the doors may be one of any other color
chosen from manufacturer’s standard selection.
Frame / Vertical Side Panels: Shall be of 18 gauge solid cold rolled sheet steel framed by 16 gauge
Hollow-T tubular sections and channel frame members designed to enclose all four edges of the side panel
with the entire assembly MIG welded to form a rigid frame for each locker. The channel frame members are
welded to the front and rear vertical frame members to create and anchor bearing surface of 1-1/4 inches
wide x the depth of the locker at each side panel.
STANDARD
Our rugged 11 gauge MIG welded
latch hook with large riveted
bumper vs. common K.D. locker
style latch hook
Integral Frame Locker Base: 14 gauge galvanneal sheet steel formed structural channels are MIG
welded to the front and rear vertical side panel frame members to allow placement of locker bottom a minimum
2-3/4" above floor level. Locker bottom shelf located less than 2" above floor level will not be acceptable.
Wardrobe Doors: Doors 20" high and over are to be fabricated from single sheet prime 14 gauge steel
with single bends at top and bottom and double bends at the sides. The channel formed by the double bend
at the latch side is designed to fully conceal the lock bar. Lock bar shall be hot dip galvanized and installed
after door is painted to ensure proper paint coverage and lock bar operation. The latching mechanism shall
be finger lift control type constructed of 14 gauge (minimum) steel with a nylon cover that has a generous
finger pull. Spring activated nylon slide latches shall be completely enclosed in the lock channel allowing
doors to close with the lock in the locked position. Locking device shall be designed for use with either built-in
combination locks or padlocks. Latch hooks shall be 11 gauge (minimum) with riveted bumpers and shall be
MIG welded to vertical frame member. Provide three latch hooks for doors 48" and over and two for doors
under 48". Doors to be louvered. Doors 18’’ and 24’’ wide shall include a 3" wide 18 gauge full height channel
door stiffener MIG welded to the hinge side of the door as well as to the top and bottom door return bends and
spot welded to the inside of door face and to form a rigid torque-free box reinforcement for the door.
Seamless Drawn Locker Handle: All wardrobe doors 20" high and over shall have a seamless drawn
not less than 304 stainless steel recessed handle shaped to receive a padlock or built-in combination lock.
The recessed handle shall be deep enough to have the lock be completely flush with the outer door face.
STANDARD
Our heavy-duty 13 gauge 7-knuckle
3-1/2" hinge vs. a common 2" K.D.
locker style hinge
Door Hinges: Hinges shall not be less than 3-1/2" long 13 gauge seven knuckle pin type, securely riveted
to frame and welded to the door. Doors are to be secured to frame with a minimum of two tamper resistant
rivets per hinge. Provide 3 hinges for doors 48" and higher and 2 for doors shorter than 48". All doors shall
be right hand side hinged.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part
MIG welded to each vertical side panel frame member and be continuous to cover the full width of a multiple
framed locker unit.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge galvanneal sheet steel, have
double bends at front and shall engage slots in the Hollow-T vertical frame members at all four corners and
be securely welded to the frame and side. Locker bottom shelf located less than 2" above floor level will not
be acceptable.
Premier Series Graduate
lockers include a 3" wide 18
gauge full height door stiffener
spot welded to the inner door face
and MIG welded to the hinge side
as well as to the top and bottom
door flanges providing a rigid
torque-free door. A 1-1/2" wide
stiffener will be furnished for 9"
wide Premier Series doors. 18” and
24” wide doors are only available in
Premier Series.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed unit and be
welded to each vertical side panel frame member.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.
com for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one galvanneal hat shelf. One double hook and two single
hooks are standard with the following exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials
and workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this
section for the lifetime of the facility.
21
America’s Most Complete Locker Line®
marquis® Protector fully-framed all-welded corridor lockers
This is the most durable and quiet corridor locker in the industry and is
constructed using our fully-framed all-welded Hollow-T framing system. If
you’re looking for quiet maintenance-free corridor lockers to last the life of your facility,
our Marquis Protector is your best choice and it is backed up in writing by our
lifetime warranty.
features
body construction: Fully-framed all-welded Hollow-T construction,
18 gauge fully-framed solid sides, 16 gauge continuous top, 18 gauge solid
back, 16 gauge galvanneal bottom
doors: 14 gauge plain doors with a full height 3” wide 18 gauge door
stiffner are standard. Louvered, Security-Plus and diamond perforated door
styles are optional
handle: Deep-drawn seamless stainless steel recessed handle
latching: Single-point maintenance-free quiet latching with 11 gauge
MIG welded latch
hinges: Heavy-duty 13 gauge 7-knuckle
3-1/2" hinges:
• 3-hinges per opening 48" high and higher
• 2-hinges per opening 20" high thru 36" high
shelves: 16 gauge galvanneal hat shelf
for single tier openings 60” and 72” high,
16 gauge galvanneal intermediate shelves
hooks: 2-single hooks and 1-double hook is
standard. 1-double hook only for triple tier and
1-double and 1-single hook for 9" wide openings
30” and higher
warranty: Lifetime
sizes: See page 12 for standard sizes. See page 5
for actual locker unit widths
22
The Toughest Corridor Locker You Can Buy
America’s Most Complete Locker Line®
marquis protector locker specifications
General: Lockers shall Be "Superior Fully-Framed All-Welded Marquis Protector Corridor Lockers" as
manufactured by List Industries Inc. or approved equal. All lockers shall be factory-assembled, of all MIG welded
construction, in multiple column units to meet job conditions. Assembly of locker bodies by means of bolts, screws,
or rivets will not be permitted. Welding of knockdown locker construction is not acceptable. Grind exposed welds
and metal edges flush and make safe to touch.
STANDARD
Deep-drawn stainless steel
recessed handle with singlepoint latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and
baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be
selected from manufacturer's standard list of colors. Two-tone color combination shall be at no additional cost with
the locker body, frame and trim chosen from one color and the doors may be one of any other color chosen from
manufacturer’s standard selection.
Frame / Vertical Side Panels: Shall be of 18 gauge solid cold rolled sheet steel framed by 16 gauge steel
Hollow-T tubular sections and channel frame members designed to enclose all four edges of the side panel with
the entire assembly MIG welded to form a rigid frame for each locker. The channel frame members are welded to
the front and rear vertical frame members to create and anchor bearing surface of 1-1/4 inches wide x the depth
of the locker at each side panel.
Integral Frame Locker Base: 14 gauge galvanneal sheet steel structural channels are MIG welded to the
front and rear vertical side panel frame members to allow placement of locker bottom a minimum 2-3/4" above floor
level. Locker bottom shelf located less than 2" above floor level will not be acceptable.
STANDARD
11 gauge single-point latch
is MIG welded to Hollow-T
frame
Marquis Protector Wardrobe And Gym Doors: Outer door to be fabricated from single sheet prime 14
gauge steel with single bends at top and bottom and double bends at the sides with a 3" wide (1-1/2” for 9” wide
doors) 18 gauge full height channel door stiffener MIG welded to the hinge side of the door as well as to the top and
bottom door return bends and spot welded to the inside of door face to form a rigid torque-free box reinforcement
for the door. Doors to be solid (non-perforated) with ventilating perforations in the top and bottom door flanges.
Marquis Seamless Drawn Stainless Steel Recessed Locker Handle: All locker doors shall have
a seamless drawn not less than 304 stainless steel recessed handle shaped to receive a padlock or built-in
combination lock. The recess pan shall be deep enough to have the lock be completely flush with the outer door
face. The pull handle shall be drawn into the left side of the handle for easy opening of the locker door.
Marquis Latch Assembly: Shall be single point rigid non-moving positive latch by means of a heavy gage
(minimum 11 gage) latch securely welded to the framed vertical divider. The latch assembly must be made of a
single piece of steel and have a padlock loop that inserts through the recess pan. The latch must be able to accept
either a padlock or built-in combination lock. Rubber bumpers shall be securely attached to the door strike.
STANDARD
Our heavy-duty 13 gauge
7-knuckle 3-1/2" hinge vs.
a common 2" K.D. locker
style hinge
Door Hinges: Hinges shall not be less than 3-1/2" long 13 gauge seven knuckle pin type, securely riveted to
frame and welded to the door. Doors are to be secured to frame with a minimum of two tamper resistant rivets per
hinge. Provide 3 hinges for doors 48" and higher and 2 for doors shorter than 48". All doors shall be right hand
side hinged.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG
welded to each vertical side panel frame member and be continuous to cover the full width of a multiple framed
locker unit.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge galvanneal sheet steel, have
double bends at front and shall engage slots in the Hollow-T vertical frame members at all four corners and be
securely welded to the frame and side. Locker bottom shelf located less than 2" above floor level will not be
acceptable.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed unit and be welded to
each vertical side panel frame member.
STANDARD
A 3" wide 18 gauge full
height door stiffener spot
welded to the inner door
face and MIG welded to the
hinge side as well as to the
top and bottom door flanges
providing a rigid torque-free
door. A 1-1/2" wide stiffener
will be furnished for 9" wide
Marquis doors.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com
for lock use chart and suggested lock application). Padlock only for 9'' wide lockers.
Equipment: Openings 60" and 72" shall include one galvanneal hat shelf. One double hook and two single hooks
are standard with the following exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
• Openings 18” high and under: No hooks.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for
the lifetime of the facility.
23
84% more
steel adds
more strength
and rigidity
over standard
expanded metal.
America’s Most Complete Locker Line®
Military TA-50 fully-framed all-welded equipment manager
Designed to be the solution to
all your storage challenges.
The TA-50 Equipment Manager
Locker is secure, durable and is
guaranteed to last the lifetime
of your facility.
features
BODY CONSTRUCTION: Fully-framed
all-welded construction, 13 gauge 1/2”
fully-framed flattened expanded metal sides,
16 gauge top, 18 gauge solid back and 16
gauge galvanneal bottom. Optional solid sides
are available.
DOORS: 14 gauge diamond perforated doors
with 18 gauge full-height door stiffener for both
doors is standard. Louvered, Security-Plus and
plain door styles are available
HANDLE: 3-point turn-handle latching
shelves: 16 gauge galvanneal upper
shelf located 12" down from top, 16 gauge
galvanneal lower shelf located 18" up from
bottom and 16 gauge galvanneal bottom shelf
TA-50 EQUIPMENT MANAGER ACTUAL SIZES
Widths: 24-3/4”, 30-5/8”, 36-1/2”, 42-3/8”, 48-1/4”, 60”
Depths: 12”, 16”, 18”, 22”, 24”
Heights: 62-3/4”, 74-3/4”, 84”
Door hinges: Heavy-duty 13 gauge
7-knuckle 3-1/2" hinges
sizes: See chart for locker sizes
accessories: Stainless steel coat rod
located under upper shelf
warranty: Lifetime
24
Rough, Tough and Ready to Go!
America’s Most Complete Locker Line®
Military TA-50 equipment manager SPECIFICATIONS
General: Lockers shall Be "Superior TA-50 Fully-Framed All-Welded Equipment Manager
Lockers" as manufactured by List Industries Inc. or approved equal. All lockers shall be
factory-assembled, of all MIG welded construction, in multiple column units to meet job
conditions. Assembly of locker bodies by means of bolts, screws, or rivets will not be
permitted. Welding of knockdown locker construction is not acceptable. Grind exposed welds
and metal edges flush and make safe to touch.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage
zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom
blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum
of 20 minutes to provide a tough durable finish. Color to be selected from manufacturer's
standard list of colors. Two-tone color combination shall be at no additional cost with the
locker body, frame and trim chosen from one color and the doors may be one of any other
color chosen from manufacturer’s standard selection.
Frame / Vertical Side Panels: Shall be of 13 gauge 1/2'' flattened expanded metal
framed by 16 gauge Hollow-T tubular sections and channel frame members designed to
enclose all four edges of the side panel with the entire assembly MIG welded to form a rigid
frame for each locker.The channel frame members are welded to the front and rear vertical
frame members to create and anchor bearing surface of 1-1/4 inches wide x the depth of
the locker at each side panel.
Integral Frame Locker Base: 14 gauge galvanneal sheet steel formed structural
channels are MIG welded to the front and rear vertical side panel frame members to allow
placement of locker bottom a minimum 2-3/4" above floor level. Locker bottom shelf located
less than 2" above floor level will not be acceptable.
Equipment Manager Doors: Right and left doors shall be fabricated from single sheet
prime 14 gauge steel with single bends at top and bottom and double bends at the sides.
Doors shall include a 3" wide 18 gauge full height channel door stiffener MIG welded to the
hinge side of the door as well as to the top and bottom door return bends and spot welded
to the inside of door face and to form a rigid torque-free box reinforcement for the door. The
latching mechanism located in the right hand door shall be a 3-point projecting turn-handle
latching mechanism designed to positively engage frame at the top and bottom as well as to
the center of the left hand door. The vertical lock rods shall be fabricated from 3/8" diameter
round rod. Steel pry-resistant retainers are to be securely welded to inner door face midway
above and below the handle. Lock rod guides shall be welded to the inner top and bottom
door flanges of the right hand door insuring proper engagement between the lock rods and
locker frame when the door is in the locked position. Locking device shall be designed for
use with either built-in combination locks or padlocks. Padlock Strike Plates are optional.
Doors to be perforated with 5/8" x 1-1/2" diamonds.
Door Hinges: Hinges shall not be less than 3-1/2" long 13 gauge seven knuckle pin type,
securely riveted to frame and welded to the door. Doors are to be secured to frame with a
minimum of two tamper resistant rivets per hinge. Provide 3 hinges for doors 48" and higher
and 2 for doors shorter than 48".
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be
an integral part MIG welded to each vertical side panel frame member and be continuous
to cover the full width of a multiple framed locker unit.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge galvanneal
sheet steel, have double bends at front and shall engage slots in the Hollow-T vertical frame
members at all four corners and be securely welded to the frame and side. Locker bottom
shelf located less than 2" above floor level will not be acceptable. Provide (1) full-width shelf
12” below top and (1) full width shelf 18” above bottom.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple framed
unit and be welded to each vertical side panel frame member.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to
www.ListIndustries.com for lock use chart and suggested lock application).
Equipment: Provide (1) full-width 1" diameter stainless steel coat rod per locker and (2)
single prong wall hooks at back.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against
all defects in materials and workmanship excluding finish, damage resulting from
deliberate destruction and vandalism under this section for the lifetime of the facility.
25
™
America’s Most Complete Locker Line®
emergency response all-welded
performance lockerS
features
BODY CONSTRUCTION: 16 gauge, Unibody all-welded,
sides, galvanneal corrosion resistant sheet steel.
Back is 18 gauge
BODY STYLES: Single tier, custom design for specialized
use
custom FEATURES: Security box (9” x 12”) with keyed
lock
DOOR: 14 gauge louvered double doors with full-height
welded in stiffener
HINGES: Continuous piano type
HANDLE: 3 point high-security turn handle latching
handle
HOOKS: Two single wall hooks in wardrobe area plus
single hook for opening below security box
COAT RODS: One at vertical wardrobe section
SHELVES: Two full-width at top, one partial shelf
above security box
Utility belt hook
Security box
One side pocket, to
accommodate a 1”
thick clipboard
Full height
piano hinge
Finish is
standard
powdercoat
Full height door
stiffener
Lower storage
area with pull-out
shelf
Large lockable
storage
compartment
doubles as a seat
finished in
laminated maple
wood.
Provides the
perfect
solution for the
storage needs of
emergency
response teams.
Available with and without
base storage compartment
and seat
26
Perfect for SWAT, Police, Fire and
All Emergency Response Teams
America’s Most Complete Locker Line®
TASKFORCE XP locker specifications
General: Lockers shall Be "Superior® Task Force XP All-Welded Emergency Response Gear Lockers" as manufactured by List Industries Inc. or
approved equal. All lockers shall be factory-assembled, of all MIG welded construction, in multiple column units to meet job conditions. Assembly
of locker bodies by means of bolts, screws, or rivets will not be permitted. Welding of knockdown locker construction is not acceptable. Grind
exposed welds and metal edges flush and make safe to touch.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed
by a coat of high grade powdercoat electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough
durable finish. Two-Tone Color Combination shall be at no additional cost with the locker frame and trim chosen from one color and the doors may
be one of any other color chosen from manufacturers standard selection.
Task Force XP locker Doors: Left and right doors shall be fabricated from single sheet prime 14 gauge galvanneal sheet steel with single
bends at top and bottom and double bends at the sides. Doors shall include a 3" wide 18 gauge full height channel door stiffener MIG welded to
the hinge side of the door as well as to the top and bottom door return bends and spot welded to the inside of door face to form a rigid torque-free
box reinforcement for the door. The latching mechanism located in the right hand door shall be a 3-point projecting turn-handle latching mechanism
designed to positively engage frame at the top and bottom as well as to the center of the left hand door. The vertical lock rods shall be fabricated
from 3/8” diameter round rod. Steel pry-resistant retainers are to be securely welded to inner door face midway above and below the handle. Lock
rod guides shall be welded to the inner top and bottom door flanges of the right hand door insuring proper engagement between the lock rods and
locker frame when the door is in the locked position. Locking devise shall be designed for use with either built-in combination locks or padlocks.
Doors are louvered.
Door Hinges: Hinges for wardrobe doors shall not be less than 16 gauge continuous piano type, securely riveted to frame and welded to the
door.
Frame / Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from 16 gauge galvanneal sheet steel. The
one-piece side/frame shall be formed to provide a continuous door strike on the hinge sides. Sides to be solid.
Integral Frame Locker Base: 16 gauge formed galvanneal sheet steel with double return flanges at the front and rear. A full depth horizontal
channel shall be MIG welded under the locker bottom front-to-back at the left and right side of each welded locker unit as well as beneath each
vertical side panel for maximum rigidity.
Flat Tops: Shall be formed of one piece of 16 gauge galvanneal sheet steel and shall be an integral part MIG welded to each vertical side panel
frame member and be continuous to cover the full width of a multiple locker unit.
Backs: Shall be 18 gauge galvanneal sheet steel, be continuous to cover a multiple column unit and be welded to each vertical side panel.
Center Partition: Shall be fabricated from 16 gauge galvanneal sheet steel and run from inside locker bottom to the underside of the lower of
the two upper shelves.
Shelves: Shall be 16 gauge galvanneal sheet steel, have double bends at front and shall be MIG welded to the sides and/or center partition.
Provide (2) upper full width shelves and (3) 9” wide (nominal) shelves to the left of the center partition.
Security Box: Shall be 9” wide x 12” high, fabricated from 16 gauge galvanneal sheet steel and include a lockable 14 gauge galvanneal sheet
steel door. Security box closes off the space between the lowest two 9” wide shelves.
Coat Rod and Hooks: Provide (1) 1” diameter stainless steel coat rod to the right of the center partition and two single coat hooks.
Body Armor Hook: Provide (1) coat hook in the lower left side opening to allow hanging of body armor.
Utility Belt Hook: Provide (1) coat hook on the inside of the right door to allow hanging of utility belt.
Clip Board Storage: Provide (1) pocket to accommodate a 1” clip board.
Optional Lower Base/Drawer Unit: Shall be fabricated of 16 gauge galvanneal sheet steel and include a pull-out drawer for storage of large
items. Drawer face shall be fabricated from heavy 14 gauge galvanneal sheet steel and includes a drawer pull. Base unit shall be 24” wide x 36”
deep x 18” high. Height includes the 1” thick laminated maple seat.
Lifetime Warranty: List Industries, Inc. Unibody All-Welded Lockers are covered against all defects in materials and workmanship excluding
finish, damage resulting from deliberate destruction and vandalism under this section for the lifetime of the facility.
STANDARD UPPER UNIT SIZES
Widths: 24", 30", 36", 48"
Depths: 18", 24"
STANDARD BASE UNIT SIZES
Widths: 24", 30", 36"
Depths: 30" 36"
27
America’s Most Complete Locker Line®
the classmate™ unibody all-welded corridor lockers
Our unique double frame, unibody all-welded design provides a durable locker with
a classic appearance that is backed by our life-time warranty.
What is Unibody All-Welded?
• Superior unibody all-welded corridor lockers include our double vertical frame design adding strength,
integrity, durability and visual appeal.
• First we start with prime grade cold rolled sheet steel. 16 gauge for all body components except backs
which are 18 gauge. Doors are heavy 14 gauge.
• Sides are formed to be an integral part of the front vertical locker frame which locks into the bottom for
precise alignment and added strength.
• We MIG weld an additional channel shaped vertical frame member between doors providing a
continuous door strike at both the hinge and latch side of the door.
• The top and bottom are flanged downward at the front to form a 1-1/2" high channel shaped top and
bottom horizontal frame member continuous across the multiple column unit up to 60" wide.
• The base is a full 1-1/2" high keeping locker contents away from moisture on the floor and/or
wood/concrete base.
• Front-to-back channel stiffeners are welded into the base under each side panel providing a strong
anchor bearing surface for installation and increasing overall unit strength.
• Horizontal tier dividers for double and triple tier models project through to the face of the locker forming
a horizontal cross member between doors for maximum strength.
• Guaranteed in writing by our lifetime warranty.
features
body construction: All-welded unibody construction,
16 gauge solid sides integral with frame, 16 gauge continuous top,
18 gauge solid back, 16 gauge bottom
doors: 14 gauge louvered doors are standard. Plain, SecurityPlus, Safety-View and diamond perforated door styles are optional
handle: Deep-drawn seamless stainless steel recessed handle
door strike: Continuous vertical door strike at both hinge and
latch side
latching: 12 gauge latch hooks MIG welded to frame. Gravity
lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
hinges: 16 gauge continuous piano type
hooks: 2-single hooks and 1-double hook is standard. 1-double
hook only for triple tier and 1-double and 1-single hook for 9" wide
openings 30” and higher
Integral Slope Top is fabricated of heavy
16 gauge steel, runs continuous across
a multiple column unit and is MIG welded
at the factory replacing welded locker
unit flat top. Sides are sloped at top
providing rigid support beneath the
slope top between each locker column.
28
shelves: 16 gauge hat shelf for single tier openings 60" and
72" high, 16 gauge intermediate shelves
warranty: Lifetime
sizes: See page 12 for standard sizes
A Classic Appearance
America’s Most Complete Locker Line®
the classmate locker specifications
General: Lockers shall Be "Superior Classmate Unibody All-Welded Corridor Lockers" as manufactured by List Industries
Inc. or approved equal. All lockers shall be factory-assembled, of all MIG welded construction, in multiple column units
to meet job conditions. Assembly of locker bodies by means of bolts, screws, or rivets will not be permitted. Welding of
knockdown locker construction is not acceptable. Grind exposed welds and metal edges flush and make safe to touch.
STANDARD
Deep-drawn stainless steel
recessed handle
with gravity lift-type latching
STANDARD
12 gauge latch hook is
welded to frame
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked
at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors.Two-tone color combination shall be at no additional cost with the locker body, frame
and trim chosen from one color and the doors may be one of any other color chosen from manufacturer’s
standard selection.
Classmate Wardrobe Doors: Doors 20" high and over are to be fabricated from single sheet prime 14 gauge steel
with single bends at top and bottom and double bends at the sides. The channel formed by the double bend at the latch
side is designed to fully conceal the lock bar. Lock bar shall be hot dip galvanized and installed after locker is painted to
ensure proper paint coverage and lock operation. The latching mechanism shall be finger lift control type constructed of
14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide latches shall be
completely enclosed in the lock channel allowing doors to close with the lock in the locked position. Locking device shall be
designed for use with either built-in combination locks or padlocks. Latch hooks shall be 12 gauge (minimum) with riveted
bumpers and shall be MIG welded to vertical frame member. Provide three latch hooks for doors 48" and over and two for
doors under 48". Doors to be louvered. Doors 18’’ and 24’’ wide shall include a 3" wide 18 gauge full height channel door
stiffener MIG welded to the hinge side of the door as well as to the top and bottom door return bends and spot welded to
the inside of door face and to form a rigid torque-free box reinforcement for the door.
Seamless Drawn Stainless Steel Recessed Locker Handle: All locker doors shall have a seamless drawn not
less than 304 stainless steel recessed handle shaped to receive a padlock or built-in combination lock. The recess pan
shall be deep enough to have the lock be completely flush with the outer door face. A finger lift/padlock hasp shall protrude
through the top of the handle for easy opening of the locker door.
Latching: The latching mechanism shall be finger lift control type constructed of 14 gauge (minimum) steel with a nylon
cover that has a generous finger pull. Spring activated nylon slide latches shall be completely enclosed in the lock channel
allowing doors to close with the lock in the locked position. Lock bar shall be hot dip galvanized and installed after door
is painted to ensure proper paint coverage and lock bar operation. Locking device shall be designed for use with either
built-in combination locks or padlocks. Latch hooks shall be 12 gauge (minimum) and shall be MIG welded to vertical frame
member. Provide three latch hooks for doors 48" and over and two for doors under 48".
STANDARD
16 gauge continuous piano
hinge
Hinges: Hinges shall not be less than16 gauge continuous piano type riveted to frame and welded to the door. All doors shall
be right hand side hinged.
Twin-Frame / Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from solid
16 gauge sheet steel. The one-piece side/frame shall be formed to provide a continuous door strike on the hinge side. An
additional continuous vertical door strike shall be achieved at the latch side by MIG welding a 16 gauge full height channel
frame member to the integral locker side producing a rigid torque-free welded locker body. The frame shall include a tab
which engages a slot in the base locking the side panel and frame into position.
Integral Frame Locker Base: 16 gauge formed sheet steel with double return flanges at the front and rear. A full
depth horizontal channel shall be MIG welded under the locker bottom front-to-back at the left and right side of each welded
locker unit as well as beneath each vertical side panel for maximum rigidity.
Premier Series
Classmate which includes
a 3" wide 18 gauge full
height door stiffener spot
welded to the inner door
face and MIG welded to the
hinge side as well as to the
top and bottom door flanges
providing a rigid torque-free
door. A 1-1/2" wide stiffener
will be furnished for 9" wide
Premier doors. 18” and 24”
all-welded lockers are only
available in Premier Series.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded
to each vertical side panel frame member and be continuous to cover the full width of a multiple locker unit. Integral slope
tops are optional.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge sheet steel, have double bends at front
and shall be MIG welded to the sides.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple twin-framed unit and be welded to
each vertical side panel.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com
for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are standard with
the following exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
Lifetime Warranty: Superior unibody all-welded lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for
the lifetime of the facility.
29
America’s Most Complete Locker Line®
Marquis® booksafe® III
unibody all-welded corridor lockers
Our third generation Marquis Booksafe locker now includes reinforced double frame
unibody construction and a modern seamless deep-drawn stainless steel recessed
handle. The industry's first and best single-point all-welded corridor locker just got
better, stronger and more durable. We guarantee it with our lifetime warranty on all
Marquis Booksafe III Lockers.Doors are provided without louvers for a clean flush front.
What is Unibody All-Welded?
• Superior unibody all-welded corridor lockers include our double vertical frame design adding strength,
integrity, durability and visual appeal.
• First we start with prime grade cold rolled sheet steel. 16 gauge for all body components except backs
which are 18 gauge. Doors are heavy 14 gauge.
• Sides are formed to be an integral part of the front vertical locker frame which locks into the bottom for
precise alignment and added strength.
• We MIG weld an additional channel shaped vertical frame member between doors providing a
continuous door strike at both the hinge and latch side of the door.
• The top and bottom are flanged downward at the front to form a 1-1/2" high channel shaped top and
bottom horizontal frame member continuous across the multiple column unit up to 60" wide.
• The base is a full 1-1/2" high keeping locker contents away from moisture on the floor and/or
wood/concrete base.
• Front-to-back channel stiffeners are welded into the base under each side panel providing a strong
anchor bearing surface for installation and increasing overall unit strength.
• Horizontal tier dividers for double and triple tier models project through to the face of the locker forming
a horizontal cross member between doors for maximum strength.
• Guaranteed in writing by our lifetime warranty.
features
body construction: All-welded unibody construction,
16 gauge solid sides integral with frame, 16 gauge continuous
top, 18 gauge solid back, 16 gauge bottom
doors: 14 gauge plain doors with a 3" wide 18 gauge full
height door stiffener are standard. Louvered, Security-Plus
and diamond perforated door styles are optional
handle: Deep-drawn seamless stainless steel recessed
handle with single-point latching
door strike: Continuous vertical door strike at both hinge
and latch side
latching: Single-point maintenance-free quiet latching
with 11 gauge MIG welded latch
Integral Slope Top is fabricated of heavy
16 gauge steel, runs continuous across
a multiple column unit and is MIG welded
at the factory replacing welded locker
unit flat top. Sides are sloped at top
providing rigid support beneath the
slope top between each locker column.
30
hinges: 16 gauge continuous piano type is standard.
Heavy-duty 13 gauge 3-1/2" 7 knuckle hinges are available
as an upgarde
hooks: 2-single hooks and 1-double hook is standard.
1-double hook only for triple tier and 1-double and
1-single hook for 9" wide openings 30” and higher
shelves: 16 gauge hat shelf for single tier openings 60" and
72" high, 16 gauge intermediate shelves
warranty: Lifetime
sizes: See page 12 for standard sizes
Double Frame Unibody Construction
America’s Most Complete Locker Line®
Marquis® booksafe® III locker specifications
General: Lockers shall Be "Superior Booksafe III Unibody All-Welded Corridor Lockers" as manufactured by
List Industries Inc. or approved equal. All lockers shall be factory-assembled, of all MIG welded construction, in
multiple column units to meet job conditions. Assembly of locker bodies by means of bolts, screws, or rivets will not be
permitted. Welding of knockdown locker construction is not acceptable. Grind exposed welds and metal edges flush
and make safe to touch.
STANDARD
Deep-drawn stainless steel
recessed handle with
single-point latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked
at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors. Two-tone color combination shall be at no additional cost with the locker body,
frame and trim chosen from one color and the doors may be one of any other color chosen from manufacturer’s
standard selection.
Marquis Booksafe III Corridor Wardrobe Doors: Doors to be fabricated from single sheet prime 14 gauge with
single bends at top and bottom and double bends at the sides. Doors shall include a 3" wide (1-1/2” for 9” wide doors)
18 gauge full height channel door stiffener MIG welded to the hinge side of the door as well as to the top and bottom
door return bends and spot welded to the inside of door face and to form a rigid torque-free box reinforcement for the
door. Doors to be solid (non-perforated) with ventilating perforations in the top and bottom door flanges.
STANDARD
11 gauge single-point latch is
MIG welded to frame
Marquis Seamless Drawn Stainless Steel Recessed Locker Handle: All locker doors shall have a
seamless drawn not less than 304, stainless steel recessed handle shaped to receive a padlock orbuilt-in combination
lock. The recess pan shall be deep enough to have the lock be completely flush with the outer door face. The pull handle
shall be drawn into the left side of the handle for easy opening of the locker door.
Marquis Booksafe III Latch Assembly: Shall be single point rigid non-moving positive latch by means of a
heavy 11 gauge (minimum) latch securely welded to the 16 gauge vertical frame member at both the continuous door
strike as well as the integral locker side to prevent the latch and frame from twisting. The latch assembly must be made
of a single piece of steel and have a padlock loop that inserts through the recess pan. The latch must be able to accept
either a padlock or built-in combination lock. Rubber bumpers shall be securely attached to the latch.
Hinges: Hinges shall not be less than16 gauge continuous piano type riveted to frame and welded to the door. All
doors shall be right hand side hinged.
Twin-Frame / Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from solid
16 gauge sheet steel. The one-piece side/frame shall be formed to provide a continuous door strike on the hinge side.
An additional continuous vertical door strike shall be achieved at the latch side by MIG welding a 16 gauge full height
channel frame member to the integral locker side producing a rigid torque-free welded locker body. The frame shall
include a tab which engages a slot in the base locking the side panel and frame into position.
STANDARD
16 gauge continuous
piano hinge
Integral Frame Locker Base: 16 gauge formed sheet steel with double return flanges at the front and rear. A full
depth horizontal channel shall be MIG welded under the locker bottom front-to-back at the left and right side of each
welded locker unit as well as beneath each vertical side panel for maximum rigidity.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded
to each vertical side panel frame member and be continuous to cover the full width of a multiple locker unit. Integral
slope tops are optional.
Hat Shelves, Intermediate Shelves And Bottoms: Shall be 16 gauge sheet steel, have double bends at
front and shall be MIG welded to the sides.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple twin-framed unit and be welded
to each vertical side panel.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.
com for lock use chart and suggested lock application). Padlock only for 9'' wide lockers.
STANDARD
A 3" wide 18 gauge full height
door stiffener spot welded to
the inner door face and MIG
welded to the hinge side as
well as to the top and bottom
door flanges providing a rigid
torque-free door. A 1-1/2" wide
stiffener will be furnished for
9" wide Marquis doors.
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are standard
with the following exceptions:
• Openings 20" and 24” high: One double hook only at 12” wide and wider.
• Openings 9” wide: Two single hooks only.
• Openings 18” high and under: No hooks.
Lifetime Warranty: Superior unibody all-welded lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for the
lifetime of the facility.
31
America’s Most Complete Locker Line®
unibody all-welded lockers
Children Safe!
The Superior® Cubbie Locker line is designed to meet the needs of early
childhood and elementary school classrooms. Combining our Unibody all-welded
locker construction and the added safety features required for this specialized
market, we offer four distinct models designed to meet any child's personal
storage needs. Superior® Cubbies are backed by our written lifetime warranty.
4 models and 24 colors
corrosion
resistant
bottom
Primary
Cubbie
Primary Jr.
Cubbie
Primary II
Cubbie
Backpack
Cubbie
features
BODY CONSTRUCTION: Unibody all-welded 16 gauge steel construction, backs are
18 gauge, bottom is galvanneal sheet steel for maximum corrosion resistance,
hemmed and beaded edges are safe to the touch
BODY STYLES: Open design, 4 body styles
SHELVES: 16 gauge welded to body for added rigidity with a beaded leading edge
for added safety
32
MODEL SIZES
WIDTH
DEPTH HEIGHT
Primary Cubbie
Primary II Cubbie
Primary Jr. Cubbie
Backpack Cubbie
12”,
12”,
12”,
15”,
12”,
12”,
12”,
12”,
15”
15”
15”
18”
16”
16”
16”
16”
48”
48”
24”
48”
notes: Easily secures to wall and floor for added safety, low installation costs,
reduced installation time, low maintenance, low life-cycle cost, lifetime warranty,
insect and termite proof. All welded cubbies will ship in multiple column units up
to 60” wide to meet individual jobsite conditions.
rounded corners and hemmed edges!
America’s Most Complete Locker Line®
primary & backpack Cubbie Specifications
General: Cubbies shall Be "List Industries Inc. Unibody All-Welded Primary/Primary II/Primary Jr., Backpack Cubbie" as manufactured
by List Industries Inc. or approved equal. All cubbies shall be factory-assembled of all MIG welded construction in multiple column units to
meet job conditions. Assembly of cubbie bodies by means of bolts, screws, or rivets will not be permitted. Welding of knockdown cubbie
construction is not acceptable. Wood cubbies are not acceptable. Grind exposed welds and metal edges flush and make safe to touch. Each
Backpack Cubbie shall consist of (2) full-width upper backpack compartments and (2) half-width wardrobe compartments.
Finishing: All cubbie parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion,
followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20
minutes to provide a tough durable finish. Color to be selected from manufacturer's standard list of colors.
Unit Vertical Side Panels: Shall be of integral frame and side wall construction manufactured from solid 16 gauge sheet steel. The
one-piece side/frame shall be formed to provide a vertical channel frame member framing the left and right side of the cubbie unit. The
integral side/frame shall be MIG welded to the continuous top and bottom producing a rigid torque-free welded cubbie unit. The frame shall
include a tab which engages a slot in the baselocking the side panel and frame into position.
Intermediate Vertical Side Panels: Shall be of 16 gauge cold rolled sheet steel securely welded to the continuous top and bottom
forming a vertical partition between cubbie compartments. The front vertical edge of the partition is to be beaded (rolled tight) to conceal the
edge of the sheet steel and insure rigidity.
Integral Frame Cubbie Base: 16 gauge galvanneal sheet steel formed with double return flanges at the front and rear. A full depth
horizontal channel shall be MIG welded to the underside from front-to-back at the left and right side of each welded cubbie unit as well as
beneath each vertical side panel for maximum rigidity.
Flat Tops: Shall be formed of one piece of 16 gauge cold rolled sheet steel and shall be an integral part MIG welded to each vertical side
panel frame member and be continuous to cover the full width of a multiple cubbie unit.
Primary Cubbie Shelves: Shall be 16 gauge sheet steel, have a beaded (rolled tight) front profile to conceal the edge of the sheet
steel and insure rigidity with single bends at sides and rear. Shelves are to be MIG welded to the sides. Primary Cubbies to include (1) fullwidth lower shelf. Primary II cubbies to include (1) full-width upper shelf in addition to the lower shelf. Primary Jr. Cubbies do not include
a shelf.
Backpack Cubbie Shelves: Shall be 16 gauge sheet steel, have a beaded (rolled tight) front profile to conceal the edge of the sheet steel and
insure rigidity with single bends at sides and rear. Shelves are to be MIG welded to the sides. Provide (2) full-width upper backpack shelves per
cubbie.
Backpack Cubbie Center Partitions: Shall be of 16 gauge cold rolled sheet steel securely welded to the underside of the lower backpack
shelf, unit back, and unit bottom. The front of the partition is to be beaded (rolled tight) to conceal the edge of the sheet steel and insure rigidity.
Backs: Shall be 18 gauge cold rolled sheet steel, be continuous to cover a multiple cubbie unit and be welded to each vertical side panel
as well as to the top and bottom.
Equipment: Furnish each cubbie wardrobe opening with one double prong ceiling hook.
Lifetime Warranty: Superior fully-framed all-welded lockers are covered against all defects in materials and workmanship excluding
finish, damage resulting from deliberate destruction and vandalism under this section for the lifetime of the facility.
Hemmed and beaded edges
eliminate sharp edges
Number plate in bottom of
cubbie so children can easily
identify their cubbie space.
33
America’s Most Complete Locker Line®
classic kd wardrobe lockers - doors 20” high & higher
classic kd wardrobe features
body construction: Knock down (KD) with 24 gauge solid
body components
doors: 16 gauge louvered doors, 18 gauge for 9" wide are
standard. Security-Plus, Safety-View and diamond perforated door
styles are available. See Standard Quiet lockers on page 38 for
plain door option
frame: 16 gauge frame with 16 gauge horizontal cross member between doors on double and triple tier wardrobe lockers
handle: Deep-drawn seamless stainless steel recessed handle
door strike: Continuous vertical door strike at both hinge
and latch side
latching: 12 gauge latch hooks MIG welded to frame. Gravity
lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
hinges: 16 gauge continuous piano type
hooks: 2-single hooks and 1-double hook is standard.
1- double hook only for triple tier and 1-double and 1 - single hook
for 9" wide openings 30” and higher
shelves: Hat shelf for single tier openings 60" and 72" high
notes: All production KD lockers are supplied without legs
unless otherwise specified
warranty: 2 years
sizes: See chart below for sizes
Single Tier
Double Tier
Triple Tier
The most practical
and commonly used
style of locker
providing ample
height for hanging
of full length
garments.
Where full length
hanging of garments is
not required or where
space limitations do not
allow for use of single
tier lockers, double tier
lockers offer an
economical alternative.
Triple tier lockers
are ideal for use
where storage of
long garments is
not required.
UPGRADES all body
components to 16 gauge with
18 gauge back. Recommended
when placing heavy items in
lockers such as backpacks.
34
See page 37 for complete Classic KD specifications
STANDARD
STANDARD
Deep-drawn stainless steel 12 gauge latch hook is
recessed handle with gravity welded to frame
lift-type latching
STANDARD
Continuous piano
hinge
STANDARD KD WARDROBE LOCKER SIZES
Tier
Single Tier
Double Tier
Triple Tier
Width
9” 12” 15” 18” 24”
9” 12” 15” 18”
9” 12” 15”
Depth
12” 15” 18” 21” 24”
12” 15” 18” 21” 24”
12” 15” 18” 21" 24"
Opening Height
36” 48” 60” 72”
30” 36”
20” 24”
Frame Height
36” 48” 60” 72”
60” 72”
60” 72”
America’s Most Complete Locker Line®
classic kd box lockers - doors 18” high & under
classic kd box locker features
body construction: Knock down (KD) with 24 gauge solid
body components
doors: 18 gauge louvered doors are standard. Plain,
Security-Plus and diamond perforated door styles are available
frame: 16 gauge frame
handle: Projecting finger pull
door strike: Continuous vertical door strike at both hinge and
latch side
latching: Single-point thru-the-door finger pull padlock hasp
hinges: 16 gauge continuous piano type
notes: All production KD lockers are supplied without legs unless
otherwise specified.
hooks: None
warranty: 2 years
sizes: See chart below for sizes
See page 37 for complete Classic KD specifications
STANDARD
Box door single-point
thru-the-door finger
pull padlock hasp
(shown with optional
Padlock Strike Plate)
Four, Five and Six Tier Models
Box lockers are ideal for use where space
is at a premium.
Padlock Strike
Plates for box doors
protect finish from
being marred by
padlock
UPGRADES all body
components to 16 gauge with
18 gauge back. Recommended
when placing heavy items in
lockers such as backpacks.
STANDARD KD BOX LOCKER SIZES
Tier
Width
Depth
Opening Height
Frame Height
Four Tier
Five Tier
Six Tier
12” 15”
12” 15”
12” 15”
12” 15” 18”
12” 15” 18”
12” 15” 18”
15” 18”
12” 14.4”
12”
60” 72”
60” 72”
72”
35
America’s Most Complete Locker Line®
classic kd specialty lockers
Designed to meet special locker needs when you are looking for a practical, space-saving, yet economical locker solution.
Ideal For multi-purpose use.
Duplex
Duplex lockers are the most
economical full length locker
available. This locker conserves
valuable floor space, yet provides
ample height for hanging full
length garments. Duplex lockers
provide two completely private
lockers in each frame. One hat
shelf and two single hooks
are standard in each wardrobe
opening. Coat rods are optional
for 18” and deeper models.
Two-Person
Two-Person lockers provide
ample storage space for two
users in a 15” or 18” wide space.
Upper box doors are controlled
by command latches located in
the corresponding lower
compartment. Two single hooks
per wardrobe opening are
standard. Coat rods are
optional for 18” and deeper.
Sixteen-Person
Sixteen-Person lockers are
the economical solution for
personal security along with
hanging space for full length
garments. Ideal for student
& teacher lounges, offices,
commercial and retail
establishments. 48” coat rod
is included. Sixteen-Person
lockers are standard with
6” high legs.
Four-Wide Wall Mount
Wall mount Lockers provide ample
additional storage space for
4 persons. Wall mount lockers can
be used as supplemental storage
in combination with other lockers
or in specific applications where
floor space is limited and storage
requirements must be met.
48” wide under-mount coat rod
is optional.
STANDARD KD SPECIALTY LOCKER SIZES
36
Model
Width
Depth
Two-Person
Duplex
Sixteen-Person
4-Wide Wall Mount
15", 18"
15" 72"
48"
12", 15", 18", 21"
12", 15", 18", 21"
18"
18"
Opening Height
N/A
60", 72"
12"
12"
Frame Height
60", 72"
60", 72"
78" (with 6" legs)
14-3/4"
When Space Is At A Premium
America’s Most Complete Locker Line®
kd wardrobe & box lockers specifications
General: Lockers shall Be "Superior Classic KD Wardrobe and Box Lockers" as manufactured by List
Industries Inc. or approved equal. Fabricate lockers square, rigid and without warp, with metal faces flat and
free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to
form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer.
Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for
fastening of number plates and recessed handle.
STANDARD
Deep drawn stainless steel
recessed handle with gravity
lift-type latching is standard for
Two-Person and Duplex locker
wardrobe doors
STANDARD
12 gauge latch hook is welded
to frame for Two-Person and
Duplex locker
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed
and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color
to be selected from manufacturer's standard list of colors. Body components to be painted #729 Parchment.
Two-tone color combination shall be at no additional cost with the locker frame and trim chosen from one color
and the doors may be one of any other color chosen from manufacturer’s standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on
both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes, including
intermediate cross frame members on double and triple tier lockers(frames with doors over 18" high) shall
be securely welded to the vertical framing members to ensure rigidity. Rubber bumpers shall be provided to
cushion door closing.
Classic KD Wardrobe Doors: Doors 20" high and over to be fabricated from single sheet prime 16 gauge
steel (18 gauge for doors 9" wide as well as Two-Person and Duplex doors) with single bends at top and
bottom and double bends at the sides. The channel formed by the double bend at the latch side is designed
to fully conceal the lock bar. Doors shall be louvered. Upper compartment doors of Two-Person shall be plain
(non-louvered).
Classic KD Box Doors: Doors 18" high and under to be fabricated from single sheet prime 18 gauge steel
with single bends at top, bottom and sides. Doors shall include a combination friction catch door pull. Padlock
Strike Plates are optional. Doors shall be fabricated to accept a built-in combination lock or padlock. Doors
with projecting spring latches shall not be acceptable. Doors shall be louvered.
Seamless Deep Drawn Stainless Steel Recessed Locker Handle: All wardrobe doors 20'' and
higher shall have a seamless drawn not less than 304 recessed stainless steel handle shaped to receive a
padlock or built-in combination lock. The recess pan shall be deep enough to have the lock be flush with the
outer door face. Box doors shall be equipped with a combination friction catch door pull as stated above.
STANDARD
Upper box door of Two-Person
locker is opened from within
user's wardrobe compartment
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type constructed
of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide
latches shall be completely enclosed in the lock channel allowing doors to close with the lock in the locked
position. Lock bar shall be hot dip galvanized and installed after door is painted to ensure proper paint
coverage and lock bar operation. Locking device shall be designed for use with either built-in combination
locks or padlocks. 12 gauge latch hooks shall be securely welded to the vertical frame channel on the strike
side to engage the nylon slide latches. Three latch hooks for doors 48" and higher, two latch hooks for doors
under 48" high. Box doors shall have a single-point, thru-the-door friction catch latch.
Door Hinges: Hinges shall not be less than 16 gauge continuous piano type riveted to frame and welded to
the door. All doors shall be right hand side hinged.
Body: Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single
return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front
horizontal frame members at not less than one place in addition to side panels. Form hat shelves at 60" and
72" high single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a
double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.
com for lock use chart and suggested lock application).
STANDARD
Box door single-point thru-thedoor finger pull padlock hasp is
standard for box doors
OPTIONAL
Padlock strikeplates for box
doors protect the finish from
being marred
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are
standard with the following exceptions:
• Openings 20" and 24” high: One double hook only.
• Openings 9” wide: One double and one single hook only for openings 30'' and higher.
• Openings 18” high and under: No hooks.
Two-Year Warranty: Superior KD lockers are covered against all defects in materials and workmanship
excluding finish, damage resulting from deliberate destruction and vandalism under this section for a period
of two years.
37
America’s Most Complete Locker Line®
quiet & WHISPER QUIET KD WARDROBE lockers
Standard Quiet lockers are constructed exactly like our Classic K.D. lockers except the door is furnished without louvers to limit
air rush through the door providing quiet operation. Perforations on upper and lower door flanges allow for concealed ventilation.
features
body construction: Knock down (KD) with 24 gauge solid body
components
doors: 16 gauge plain doors (18 gauge for 9" wide), sound deadening
panel for Whisper Quiet lockers only
frame: 16 gauge frame with 16 gauge horizontal cross member
between doors on double and triple tier wardrobe lockers
handle: Deep-drawn stainless steel recessed handle
door strike: Continuous vertical door strike at both hinge and
latch side
latching: 12 gauge latch hooks MIG welded to frame. Gravity lift-type
multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
• Isolated latching mechanism for Whisper Quiet only
hinges: 16 gauge continuous piano type
hooks: 2-single hooks and 1-double hook is standard. 1- double hook
only for triple tier and 1-double and 1 - single hook for 9" wide openings
30” and higher
shelves: Hat shelf for single tier openings 60" and 72" high
notes: All production KD lockers are supplied without legs unless otherwise
specified. Standard Quiet and Whisper Quiet lockers are available with plain
doors only. Additional perforations/louvers in the door will increase decibel
levels thus reducing the efficiency of our quiet design.
warranty: 2 years
sizes: See wardrobe locker chart on page 34 for sizes
Whisper Quiet
UPGRADES all body
components to 16 gauge with
18 gauge back. Recommended
when placing heavy items in
lockers such as backpacks.
38
Adds an isolated latching mechanism and
die formed sound deadening panel filled with
acoustical material providing the quietest and
most aesthetically pleasing gravity latch locker
available. Perforated upper and lower door
flanges allow for concealed ventilation.
Also available in Two-Person and Duplex models (see page 36 for sizes).
Our Silent Approach To Locker Design
America’s Most Complete Locker Line®
STANDARD QUIET locker specifications
General: Lockers shall Be "Superior Standard Quiet KD Lockers" as manufactured by List Industries Inc. or approved
equal. Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make
all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt,
or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts
or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.
STANDARD
Deep drawn stainless
steel recessed handle
with gravity
lift-type latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution
to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at
350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors. Body components to be painted #729 Parchment.Two-tone color combination
shall be at no additional cost with the locker frame and trim chosen from one color and the doors may be one of any
other color chosen from manufacturer’s standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch
and hinge side vertical members. Cross frame members of 16 gauge channel shapes, including intermediate cross
frame members on double and triple tier lockers (frames with doors over 18" high) shall be securely welded to the
vertical framing members to ensure rigidity. Rubber bumpers shall be provided to cushion door closing.
Standard Quiet Wardrobe Doors: Doors 20" high and over to be fabricated from single sheet prime 16 gauge
steel (18 gauge for doors 9" wide as well as Two-Person and Duplex doors) with single bends at top and bottom and
double bends at the sides. The channel formed by the double bend at the latch side is designed to fully conceal the
lock bar. Doors shall be plain (non-louvered). Wardrobe doors shall include ventilating perforations in the top and
bottom door flanges.
STANDARD
12 gauge latch hook is
welded to frame
Deep Drawn Stainless Steel Recessed Locker Handle: All wardrobe doors 20'' and higher shall have deep
drawn not less than 304 recessed stainless steel handle shaped to receive a padlock or built-in combination lock. The
recess pan shall be deep enough to have the lock be flush with the outer door face.
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14
gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide latches shall
be completely enclosed in the lock channel allowing doors to close with the lock in the locked position. Lock bar shall
be hot dipped galvanized and installed after door is painted to ensure proper paint coverage and lock bar operation.
Locking device shall be designed for use with either built-in combination locks or padlocks. 12 gauge latch hooks shall
be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches. Three latch hooks
for doors 48" and higher, two latch hooks for doors under 48" high.
Door Hinges: Hinges shall not be less than 16 gauge continous piano type riveted to frame and welded to the
door. All doors shall be right hand side hinged.
STANDARD
16 gauge continuous
piano hinge
Body: Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full
height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends
at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame
members at not less than one place in addition to side panels. Form hat shelves at 60" and 72" high single tier lockers
of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com
for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are standard
with the following exceptions:
• Openings 20" and 24” high: One double hook only.
• Openings 9” wide: One double and one single hook only for openings 30'' and higher
Two-Year Warranty: Superior KD lockers are covered against all defects in materials and workmanship excluding
finish, damage resulting from deliberate destruction and vandalism under this section for a period of two years.
STANDARD
Perforated top and
bottom door flanges for
all Standard Quiet and
Whisper Quiet lockers
allow for concealed
ventilation
39
America’s Most Complete Locker Line®
HEAVY-DUTY CORRIDOR (hdc) KD WARDROBE lockers
Heavy-Duty Corridor lockers, commonly known as HDC lockers, are designed to include all the great features of our Classic KD
wardrobe lockers; however, the door gauge is increased to 14 gauge which is 25% heavier than standard 16 gauge doors. To
further increase door integrity, we offer our HDC Premier model which includes an 18 gauge full height door stiffener.
features
body construction: Knock down (KD) with 24 gauge
solid body components
doors: 14 gauge louvered doors are standard. Plain,
Security-Plus, Safety-View and diamond perforated door styles
are available
frame: 16 gauge frame with 16 gauge horizontal cross
member between doors on double and triple tier wardrobe
lockers
handle: Deep-drawn seamless stainless steel recessed
handle
door strike: Continuous vertical door strike at both hinge
and latch side
latching: 12 gauge latch hooks MIG welded to frame.
Gravity lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher
• 2-point latching for openings 20" high thru 36" high
hinges: 16 gauge continuous piano type
hooks: 2-single hooks and 1-double hook is standard.
1- double hook only for triple tier and 1-double and 1 - single
hook for 9" wide openings 30” and higher
shelves: Hat shelf for single tier openings 60" and 72" high
notes: All production KD lockers are supplied without legs
unless otherwise specified
sizes: See wardrobe locker chart on page 34 for sizes
warranty: 2 years
UPGRADES all body
components to 16 gauge with
18 gauge back. Recommended
when placing heavy items in
lockers such as backpacks.
40
25% Heavier Doors Than Standard KD
America’s Most Complete Locker Line®
HEAVY-DUTY CORRIDOR (hdc) specifications
General: Lockers shall Be "Superior Heavy-Duty Corridor (HDC) KD Lockers" as manufactured by List Industries
Inc. or approved equal. Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents
or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece
structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds
flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates
and recessed handle.
STANDARD
Deep drawn stainless steel
recessed handle with
gravity lift type latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution
to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at
350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors. Body components to be painted #729 Parchment. Two-tone color combination
shall be at no additional cost with the locker frame and trim chosen from one color and the doors may be one of any
other color chosen from manufacturer’s standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch
and hinge side vertical members. Cross frame members of 16 gauge channel shapes, including intermediate cross
frame members on double and triple tier (frames with doors over 18" high) lockers shall be securely welded to the
vertical framing members to ensure rigidity. Rubber bumpers shall be provided to cushion door closing.
HDC Wardrobe Doors: Doors 20" high and over to be fabricated from single sheet prime 14 gauge steel with
single bends at top and bottom and double bends at the sides. The channel formed by the double bend at the latch
side is designed to fully conceal the lock bar. Doors shall be louvered.
STANDARD
12 gauge latch hook is
welded to frame
Deep Drawn Stainless Steel Recessed Locker Handle: All wardrobe doors 20'' and higher shall have
recessed deep drawn not less than 304 stainless steel handle shaped to receive a padlock or built-in combination
lock. The recess pan shall be deep enough to have the lock be flush with the outer door face.
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14
gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide latches shall
be completely enclosed in the lock channel allowing doors to close with the lock in the locked position. Lock bar shall
be hot dip galvanized and installed after door is painted to ensure proper paint coverage and lock bar operation.
Locking device shall be designed for use with either built-in combination locks or padlocks. 12 gauge latch hooks
shall be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches. Three latch
hooks for doors 48" and higher, two latch hooks for doors under 48" high.
Door Hinges: Hinges shall not be less than 16 gauge continuous piano type riveted to frame and welded to the
door. All doors shall be right hand side hinged.
STANDARD
16 gauge continuous
piano hinge
Body: Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full
height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends
at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame
members at not less than one place in addition to side panels. Form hat shelves at 60" and 72" high single tier lockers
of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.
com for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are standard
with the following exceptions:
• Openings 20" and 24” high: One double hook only.
• Openings 9” wide: One double and one single hook only for openings 30'' and higher.
Two-Year Warranty: Superior KD lockers are covered against all defects in materials and workmanship
excluding finish, damage resulting from deliberate destruction and vandalism under this section for a period of
two years.
Premier Series
HDC lockers
which includes a 3" wide 18
gauge full height door stiffener.
A 1-1/2” wide stiffener will be
furnished for 9” wide Premier
doors.
41
America’s Most Complete Locker Line®
MARQUIS® STUDENT KD lockers
Since 1983, Superior® Marquis Student KD lockers are the most specified single-point lockers in the marketplace.
Designed with superior features usually reserved for heavy-duty athletic lockers, our sixth generation Marquis
Student locker is an engineering achievement.
features
body construction: Knock down (KD)
with 24 gauge solid body components
doors: 14 gauge plain doors with 18
gauge full-height door stiffener are standard.
Louvered, Security-Plus and diamond
perforated door styles are available
frame: 16 gauge frame with 16 gauge
horizontal cross member between doors on
double and triple tier wardrobe lockers
handle: Deep-drawn seamless stainless
steel recessed handle
door strike: Continuous vertical door
strike at both hinge and latch side
latching: Single-point maintenance-free
quiet, 11 gauge latch hooks MIG welded
to frame
hinges: 16 gauge continuous piano type is
standard. Heavy-duty 13 gauge 3-1/2"
7-knuckle hinges are available as an upgrade
hooks: 2-single hooks and 1-double hook is
standard. 1- double hook only for triple tier and
1-double and 1-single hook for 9" wide
openings 30” and higher
shelves: Hat shelf for single tier openings
60" and 72" high
notes: All production KD lockers are
supplied without legs unless otherwise
specified.
sizes: See wardrobe locker chart on page 34
for sizes
warranty: 2 years
UPGRADES all body
components to 16 gauge with
18 gauge back. Recommended
when placing heavy items in
lockers such as backpacks.
42
America's Original Single-Point Locker
America’s Most Complete Locker Line®
MARQUIS® student locker specifications
General: Lockers shall Be "Superior Marquis Student KD Lockers" as manufactured by List Industries Inc. or
approved equal. Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or
distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece
structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds
flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates
and recessed handle.
STANDARD
Deep-drawn stainless steel
recessed handle with
single-point latching
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate
solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and
baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Color to be
selected from manufacturer's standard list of colors. Body components to be painted #729 Parchment. Two-tone
color combination shall be at no additional cost with the locker frame and trim chosen from one color and the doors
may be one of any other color chosen from manufacturer’s standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch
and hinge side vertical members. Cross frame members of 16 gauge channel shapes, including intermediate cross
frame members on double and triple tier (frames with doors over 18" high) lockers shall be securely welded to the
vertical framing members to ensure rigidity. Rubber bumpers shall be provided to cushion door closing.
STANDARD
11 gauge single-point latch
is MIG welded to frame
Marquis Student Wardrobe Doors: Doors 20" high and over to be fabricated from single sheet prime 14
gauge steel with single bends at top and bottom and double bends at the sides. Doors shall include a 3" wide
(1-1/2” for 9” wide doors) 18 gauge full height channel door stiffener MIG welded to the hinge side of the door
as well as to the top and bottom door return bends and spot welded to the inside of door face to form a rigid
torque-free box reinforcement for the door. Doors shall be plain (non-louvered). Wardrobe doors shall include
ventilating perforations in the top and bottom door flanges.
Marquis Seamless Drawn Locker Handle: All wardrobe doors 20" and higher shall have a seamless
drawn not less than 304, stainless steel not less than 304 recessed handle shaped to receive a padlock or built-in
combination lock. The recessed handle shall be deep enough to have the lock be completely flush with the outer
door face.
Marquis Latch Assembly: Shall be single point rigid non-moving positive latch by means of a heavy 11 gauge
(minimum) latch securely welded to the 16 gauge vertical frame member. The latch assembly must be made of a
single piece of steel and have a padlock loop that inserts through the recess pan. The latch must be able to accept
either a padlock or built-in combination lock. A rubber bumper shall be securely attached to the latch.
STANDARD
16 gauge continuous piano
hinge
Door Hinges: Hinges shall not be less than16 gauge continuous piano type riveted to frame and welded to the
door. All doors shall be right hand side hinged.
Body: Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending
full height. Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return
bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal
frame members at not less than one place in addition to side panels. Form hat shelves at 60" and 72" high single
tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.ListIndustries.com
for lock use chart and suggested lock application). Padlock only for 9'' wide lockers.
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks are
standard with the following exceptions:
STANDARD
Marquis Student Lockers
include a 3" wide 18 gauge
full height door stiffener
spot welded to the inner
door face and MIG welded
to the hinge side as well as
to the top and bottom door
flanges providing a rigid
torque-free door. A 1-1/2"
wide stiffener will be furnished for 9" wide Marquis
doors.
• Openings 20" and 24” high: One double hook only.
• Openings 9” wide: One double and one single hook only for openings 30'' and higher.
Two-Year Warranty: Superior KD lockers are covered against all defects in materials and workmanship
excluding finish, damage resulting from deliberate destruction and vandalism under this section for a period of two
years.
43
America’s Most Complete Locker Line®
safety-View™ lockers
features
BODY CONSTRUCTION: Knock-down, 24 gauge,
BODY STYLES: Single, double and triple tiers
SPECIAL FEATURES: Wardrobe: Two, high strength injection molded
polycarbonate panels per door for content viewing Box: High strength
injection molded polycarbonate doors for content viewing
DOOR: 16 gauge (For wardrobe doors only)
HINGES: Continuous piano type
HANDLE (wardrobe): Stainless steel recessed handle with multi-point gravity
lift-type latching. Recessed handle protects finish from being marred by
padlock.
HANDLE (box): Single-point projecting friction catch door pull prepared for
both padlock or built-in lock.
HOOKS: One double prong ceiling hook and two single wall hooks per
single and double tier opening. One double ceiling hook for triple tier.
No hooks for box lockers
COAT RODS: Available for single tier at a nominal cost
SHELVES: Hat shelf is included in 60" and 72" high single tier lockers.
notes: Meets UL flammability standards, Polycarbonate is approved by
the Consumer Product Safety Commission (CPSC16CFR 1201). All
production lockers are standard with no legs unless otherwise specified.
Safety-View doors are available as a retrofit to most lockers.
Safety-View™ Double Tier lockers
(Also available in single and triple tier)
safety-View™ plus lockers
Safety-View™ Plus
Six Tier Lockers
(also available in five tier)
See-thru doors
Safety-View™ Plus
4-wide wall mount lockers
Shown with
optional closed
metal base
Safety-View™ Plus Sixteen-Person
lockers (6” high legs are standard)
44
Safety-View
Wardrobe
Lockers
Safety-View
Plus
Box Lockers
WIDTH
DEPTH OPENING HGT
Single Tier
12"
12", 15", 18"
Double Tier
12"
12", 15", 18"
Triple
Tier
12"
12",
15", 18"
Five Tier
12"
12", 15", 18"
Six Tier
12"
12", 15", 18"
Sixteen-Person
72"
18"
4-Wide Wall
48"
18"
Mount
FRAME HGT
72"
72"
60", 72"
30", 36"
20", 24"
12"
12"
12"
12"
72"
60"
72"
78" with 6" legs
14-3/4"
For additional sizes, please consult factory for availability.
Ideal For Monitoring Locker Contents
America’s Most Complete Locker Line®
Safety-View SPECIFICATIONS
Safety-View PLUS SPECIFICATIONS
General: Lockers shall Be "Superior Safety-View KD Wardrobe Lockers" as
manufactured by List Industries Inc. or approved equal. Fabricate lockers square,
rigid and without warp, with metal faces flat and free from dents or distortion. Make all
exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece
structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer.
Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or
frames except for fastening of number plates and recessed handle.
General: Lockers shall Be "Superior Safety-View Plus KD Box
Lockers" as manufactured by List Industries Inc. or approved
equal. Fabricate lockers square, rigid and without warp, with
metal faces flat and free from dents or distortion. Make all
exposed metal edges safe to touch. Weld frame members
together to form rigid, one-piece structure. Weld, bolt, or rivet
other joints and connections as standard with manufacturer.
Grind exposed welds flush. Do not expose bolts or rivet heads
on fronts of locker doors or frames except for fastening of
number plates.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven
stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade
custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for
a minimum of 20 minutes to provide a tough durable finish. Color to be selected from
manufacturer's standard list of colors. Body components to be painted #729 Parchment.
Two-tone color combination shall be at no additional cost with the locker frame and
trim chosen from one color and the doors may be one of any other color chosen from
manufacturer’s standard selection.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door
stop/strike formed on both latch and hinge side vertical members. Cross frame members
of 16 gauge channel shapes, including intermediate cross frame members on double and
triple tier lockers (frames with doors 20" high and higher) shall be securely welded to the
vertical framing members to ensure rigidity. Rubber bumpers shall be provided to cushion
door closing.
Safety-View Wardrobe Doors: Doors 20" high and over to be fabricated from
single sheet prime 16 gauge steel with single bends at top and bottom and double
bends at the sides. The channel formed by the double bend at the latch side is
designed to fully conceal the lock bar. Doors shall include two clear see-thru
polycarbonate panels securely attached to the inner door face above and below the
recessed handle using a full perimeter welded retainer. The see-thru door panels shall
consist of a clear, polished surface, ultraviolet-stabilized polycarbonate not less than
1/8" thick to meet building code requirements for a CC-1 rating and be listed with the
Underwriters Laboratories for the UL flammability standard and the UL972 standard for
burglary resistant glazing materials. Polycarbonate must be approved for Consumer
Product Safety Commission (CPSC 16CFR 1201) Categories I & II and ANSI Z97.1-1984
Safety Glazing Standards. Doors shall be plain (non-louvered).
Seamless Drawn Stainless Steel Recessed Locker Handle: All
wardrobe doors 20'' and higher shall have a seamless drawn stainless steel recessed
handle not less than 304, shaped to receive a padlock or built-in combination lock. The
recess pan shall be deep enough to have the lock be completely flush with the outer door
face. A finger lift/padlock hasp shall protrude through the top of the handle for easy opening
of the locker door.
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type
constructed of 14 gauge (minimum) steel with a nylon cover that has a generous
finger pull. Spring activated nylon slide latches shall be completely enclosed in the lock
channel allowing doors to close with the lock in the locked position. Lock bar shall be
hot dip galvanized and installed after door is painted to ensure proper paint coverage and lock bar operation. Locking device shall be designed for use with either built-in
combination locks or padlocks. 12 gauge latch hooks shall be securely welded to the vertical
frame channel on the strike side to engage the nylon slide latches. Three latch hooks for
doors 48" and higher, two latch hooks for doors under 48" high.
Finishing: All locker parts to be cleaned and coated after
fabrication with a seven stage zinc/iron phosphate solution to
inhibit corrosion, followed by a coat of high grade custom blend
powder electrostatically sprayed and baked at 350 degrees
Fahrenheit for a minimum of 20 minutes to provide a tough
durable finish. Color to be selected from manufacturer's
standard list of colors. Interior components to be painted to
match the exterior color.
Frame: Fabricate of 16 gauge (minimum) channels welded
to horizontal channels top and bottom with integral continuous
vertical door stop/strike formed on both latch and hinge side.
Safety-View Plus Box Doors: Doors to be of a single
piece of polycarbonate, injection molded to include single
bends at all four sides for strength. The material used for
the fabrication of the door shall be a clear, polished surface,
ultraviolet-stabilized polycarbonate not less than 1/8" thick to
meet building code requirements for a CC-1 rating and be
listed with the Underwriters Laboratories for the UL flammability
standard and the UL972 standard for burglary resistant glazing
materials. Polycarbonate must be approved for Consumer
Product Safety Commission (CPSC 16CFR 1201) Categories
I & II and ANSI Z97.1-1984 Safety Glazing Standards. Doors
shall include a combination friction catch door pull. Padlock
Strike Plates are optional. Doors shall be fabricated to accept a
built-in combination lock or padlock.
Door Hinges: Doors shall include a plated 16 gauge
continuous piano hinge riveted to both the door and the frame.
All doors to be right hand, side hinged.
Body: Fabricate back and sides of 24 gauge (minimum) sheet
steel, with double flanged connections extending full height.
Form top, bottom and intermediate tier dividers of 24 gauge
(minimum) sheet steel with single return bends at all sides. Bolt
top and bottom to front horizontal frame members at not less
than one place in addition to side panels.
Locks (If Required): Shall be master keyed to one
system for the entire project. (Go to www.ListIndustries.
com for lock use chart and suggested lock application).
Door Hinges: Hinges shall not be less than16 gauge continuous piano type
riveted to frame and welded to the door. All doors shall be right hand side hinged.
Body: Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged
connections extending full height. Form top, bottom and intermediate tier dividers of 24
gauge (minimum) sheet steel with single return bends at all sides. Bolt top and bottom as
well as horizontal tier dividers of wardrobe openings to front horizontal frame members at
not less than one place in addition to side panels. Form hat shelves at 60" and 72" high
single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back
and a double bend at front.
Two-Year Warranty Superior Safety-View and
Safety-View Plus KD lockers are covered against all defects
in materials and workmanship excluding finish, damage
resulting from deliberate destruction and vandalism under
this section for a period of two years.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.
ListIndustries.com for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook
and two single hooks are standard with the following exceptions:
• Openings 20" and 24” high: One double hook only.
• Openings 9” wide: One double and one single hook only for openings 30'' & higher
45
America’s Most Complete Locker Line®
heavy-duty ventilated (HDV) kd lockers
Heavy-Duty Ventilated (HDV) knock-down lockers are
the perfect solution when budget restrictions prevent
the use of fully-framed all-welded lockers.
features
body construction (Wardrobe & Box lockers): Knock down
(KD) with 16 gauge solid top, bottom and intermediate shelves, 16 gauge
diamond perforated sides, 18 gauge solid back
doors: 14 gauge diamond perforated doors are standard. Louvered,
Security-Plus and plain door styles are available
frame: 16 gauge frame with 16 gauge horizontal cross member between
doors on double and triple tier wardrobe lockers
hinges: 16 gauge continuous piano type
door strike: Continuous vertical door strike at both hinge and latch side
WARDROBE LOCKERS (Doors 20" and higher):
handle: Deep-drawn seamless stainless steel recessed handle
latching: Gravity lift-type multi-point spring loaded latching:
• 3-point latching for openings 48" high and higher,
• 2 point latching for openings 20" high thru 36" high
hooks: 2-single hooks and 1-double hook is standard.
• 1- double hook only for triple tier and 1-double
• 1 - single hook for 9" wide openings 30” and higher
shelves: 16 gauge hat shelf for single tier openings 60" and 72" high
box LOCKERS:
handle: Single-point thru-the-door finger pull padlock hasp
hooks: None
notes: All production KD lockers are supplied without legs unless
otherwise specified
warranty: 2 years
sizes: See charts on page 34 and 35 for wardrobe and box locker for sizes
STANDARD
46
12 gauge latch hook is
welded to frame for HDV
wardrobe doors 20” high
and higher
STANDARD
Deep-drawn stainless steel
recessed handle with gravity
lift-type latching for all HDV
wardrobe lockers.
STANDARD
16 gauge continuous piano
hinges are standard on all
HDV lockers.
STANDARD
Single-point thru-the-door
finger pull padlock hasp is
standard for HDV box doors
18” high and under
Affordability and Functionality in One Locker
America’s Most Complete Locker Line®
HDV locker specifications
General: Lockers shall Be "Superior Heavy-Duty Ventilated (HDV) KD Wardrobe and Box Lockers"
as manufactured by List Industries Inc. or approved equal. Fabricate lockers square, rigid and without
warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to
touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints
and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet
heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.
Finishing: All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron
phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder
electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a
tough durable finish. Color to be selected from manufacturer's standard list of colors. Body components
to be painted choice of #729 Parchment or #725 Hallowell Gray. Two-tone color combination shall be
at no additional cost with the locker frame and trim chosen from one color and the doors may be one of
any other color chosen from manufacturer’s standard selection.
Premier Series HDV lockers include
our 3" wide 18 gauge full height door
stiffener welded to the inner door face
providing a rigid torque-free door.
A 1-1/2" wide stiffener will be furnished for 9" wide Premier Series
Wardrobe and 12" wide Premier Series
Box Locker doors.
Frame: Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed
on both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes,
including intermediate cross frame members on double and triple tier lockers (frames with doors over
18" high) lockers shall be securely welded to the vertical framing members to ensure rigidity. Rubber
bumpers shall be provided to cushion door closing.
HDV Wardrobe Doors: Doors 20" high and higher shall be fabricated from single sheet prime 14
gauge steel with single bends at top and bottom and double bends at the sides.The channel formed by
the double bend at the latch side is designed to fully conceal the lock bar. Doors to be perforated with
5/8" x 1-1/2" diamonds.
HDV Box Doors: Doors 18" high and under to be fabricated from single sheet prime 14 gauge
with single bends at top, bottom and sides. Doors shall include a combination friction catch door pull.
Padlock Strike Plates are optional. Doors shall be fabricated to accept a built-in combination lock or
padlock. Doors with projecting spring latches shall not be acceptable. Doors to be perforated with
7/16" x 15/16" diamonds.
Deep Drawn Stainless Steel Recessed Locker Handle: All wardrobe doors 20'' and higher
shall have deep drawn not less than 304 recessed stainless steel handle shaped to receive a padlock or
built-in combination lock.The recess pan shall be deep enough to have the lock be flush with the outer
door face. Box doors shall be equipped with a combination friction catch door pull as stated above.
Latch Assembly: The latching mechanism for wardrobe doors shall be finger lift control type
constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring
activated nylon slide latches shall be completely enclosed in the lock channel allowing doors to close
with the lock in the locked position. Lock bar shall be hot dip galvanized and installed after door is
painted to ensure proper paint coverage and lock bar operation. Locking device shall be designed for
use with either built-in combination locks or padlocks. 12 gauge latch hooks shall be securely welded
to the vertical frame channel on the strike side to engage the nylon slide latches. Three latch hooks for
doors 48" and higher, two latch hooks for doors under 48" high.
Door Hinges: Hinges shall not be less than 16 gauge continuous piano type riveted to frame and
welded to the door. All doors shall be right hand side hinged.
Marquis Series HDV lockers which
include our deep-drawn seamless
stainless steel recessed handle with
single-point latching, and a 3" wide 18
gauge full height door stiffener spot
welded to the inner door face and MIG
welded to the hinge side as well as
to the top and bottom door flanges
providing a rigid torque-free door. A
1-1/2" wide stiffener will be furnished
for 9" wide Marquis Series doors.
Body: Fabricate backs of 18 gauge (minimum) solid sheet steel and sides of 16 gauge (minimum)
sheet steel with double flanged connections extending full height. Sides to be diamond perforated for
added ventilation. Form top, bottom and intermediate tier dividers of 16 gauge (minimum) solid sheet
steel with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less than one place in addition to side panels.
Form hat shelves at 60" and 72" high single tier lockers of 16 gauge (minimum) sheet steel with single
bends at sides and back and a double bend at front.
Locks (If Required): Shall be master keyed to one system for the entire project. (Go to www.
ListIndustries.com for lock use chart and suggested lock application).
Equipment: Openings 60" and 72" shall include one hat shelf. One double hook and two single hooks
are standard with the following exceptions:
• Openings 20" and 24” high: One double hook only
• Openings 9” wide: One double and one single hook only for openings 30'' and higher
• Openings 18” high and under: No hooks.
Two-Year Warranty: Superior KD lockers are covered against all defects in materials and
workmanship excluding finish, damage resulting from deliberate destruction and vandalism
under this section for a period of two years.
47
™
®
®
by List Industries Inc.®
Recruiter Lockers
will create a truly
unique environment
that will endure
the test of time.
48
A Powerful Recruiting Tool
America’s Most Complete Locker Line®
Recruiter lockers are
made in our North
Florida manufacturing
facility. This guarantees
you absolute quality
control and on-time
delivery.
Recruiter lockers are crafted of
furniture grade red oak and
finished using three coats of high
grade cabinet lacquer. Red oak is
naturally moisture and mildew
resistant so you can be sure to
benefit from your investment for
years to come. Recruiter lockers
are virtually unaffected by normal
locker room conditions and are
designed to stand up to daily use
by today’s athletes!
In addition to our standard stock
designs and sizes, our engineers
are readily available to assist you
in custom designing a locker to
meet your specific needs. Be it a
fitness center, team locker room,
country club or resort health spa,
we stand behind our product with
a full one year warranty that
covers defects in materials and
workmanship.
Call 800-776-1342 for more information on
Recruiter™ Custom Wood Lockers.
49
™
America’s Most Complete Locker Line®
®
by List Industries Inc.®
features
• All lockers ship
fully-assembled
• Fabricated from furniture
grade red oak
• Strong, durable and
long-lasting
• Excellent moisture
resistance
• Upper security box
door includes built-in
combination lock
• Optional team engraved
logo on security box door
• Lower foot locker/seat
allows for storage of
bulk items
• Chrome plated coat rod
• Shoulder pad storage
• 3-coat lacquer finish
• Custom designs are
also available
• Custom wood species
available
The beauty is in
the details...
These lockers are high quality
fine furniture. We take special
pride in ensuring that each locker
is a true work of art. All are made
in our own manufacturing plant and
shipped directly to you.
50
We can work from your designs
or choose from ours.
A Powerful Recruiting Tool
America’s Most Complete Locker Line®
In addition to lockers, we
also design and produce
related items such as trophy
cases, benches, audio/video
rooms and Corian® tops
fabricated by factorycertified technicians.
Our staff includes consultants to guide
you through the design and budget
process. We cover production
scheduling, deadlines and other critical
factors during this important phase.
For more information contact us at:
info@ListIndustries.com
RECRUITER locker specifications
General: Lockers shall Be "Superior Recruiter Custom Wood Sport Lockers" as manufactured by List Industries Inc.
or approved equal.
Finish: All locker parts to be finished with a three coat catalyzed clear cabinet lacquer or equivalent.
Locker Body: Wood lockers shall be fabricated from ¾” plain sliced red oak plywood throughout including sides, backs, grates,
seats and upper and lower shelves.
Locker Trim: Face trim, shelf valances, seat front nosing, seat hinge support blocking and seat side support cleats are to be
fabricated from red oak lumber.
Security Box Door: Shall be fabricated from red oak lumber.
Hinges: Hinges shall for personal effects locker and seat shall be continuous hinges in bright brass plating.
Upper Shelf: The top of the upper shelf shall be covered with Wilson-Art 7888-60 Golden Oak plastic laminate for durability.
Locks (If Required): Shall be master keyed to one system for the entire project. (See lock use chart for suggested
lock application).
Equipment: Furnish each locker with the following items:
- two hanging hooks are to be 50mm double prong Hewi hooks
- one clothes hang bar to be KV 1 1/16” diameter chrome plated steel, .075” wall thickness
stock sizes 24" wide x 24" deep x 84" high
30" wide x 24" deep x 84" high
One Year Warranty: Superior Recruiter Lockers are covered against all defects in materials and workmanship excluding
finish, damage resulting from deliberate destruction and vandalism under this section for a period of one year.
Custom designs, sizes and wood types
are available upon request.
51
™
America’s Most Complete Locker Line®
A complete line of PRODUCTION plastic lockers
specifically manufactured to meet demanding industry
needs when protection from corrosion is required.
ADVANTAGES:
• Scratch, impact and dent resistant
• Easy to clean
• Mildew and odor resistant
• Graffiti resistant (pencil, pen, paint and
most common markers)
features
body construction: High impact, high density polyethylene plastic (HDPE), 3/8" thick body
panels
doors: High impact (HDPE) 1/2” thick door and frame, Horizontal slots in door face provide
ample ventilation. Plain (non-ventilated) and lattice (diamond perforations) are also available
handle (wardrobe): Projecting solid plastic handle
handle (box): Box doors 18" and under include a single-point projecting friction catch door pull
with padlock hasp
latching: Full-height lift-type latching for single, double and triple tier wardrobe lockers
hinges: Continuous aluminum hinge is powder coated
hooks: One double ceiling hook is included in single and double tier
shelves: Hat shelf is included in single tier lockers 60" and 72" high
notes: All doors prepared for use with padlock (Locks not included) Preparation for other locking
mechanisums available upon request
warranty: 15 years
sizes: See chart for sizes
10 Designer Colors FOR PRODUCTION LOCKERS
All production locker body components will be our standard neutral color: white.
Desert Beige
52
Burgundy
Royal Blue
Hunter Green Midnight Black Charcoal Gray
Gray
Glacier Gray
Sandcastle
Capuccino
Speckled Patterns
Solid Plastic (HDPE) Production Lockers
are perfect for use in wet environments,
such as showers, pools and the outdoors.
America’s Most Complete Locker Line®
SPECIFICATIONS
General: DuraTech™ solid plastic lockers as supplied by List
Industries Inc. These specifications will be regarded as minimum.
lockers constructed of other materials, including materials with a core
and not of solid plastic, will not be accepted.
Construction (Doors and door frames): Locker doors
and door frames shall be made from high impact, high density
polyethylene (HDPE) formed under pressure into solid plastic
components 1/2" thick with homogeneous color throughout.
Construction (Sides, tops, bottoms, backs and shelves):
Sides, tops, bottoms, backs and shelves shall be made from high
impact, high density polyethylene (HDPE) formed under pressure
into solid plastic components 3/8" thick with homogeneous color
throughout.
Finishing: All HDPE components shall have a smooth "orange
peel" finish. Locker doors and door frames shall be of the same color
selected from the DuraTech full color line.
Latch: Continuous shall be made from high impact HDPE plastic
capable of accepting various locking mechanisums. latch shall
be securly fastened to the entire length of the door, providing a
continuous latch.
Door Hinge: Shall be made from heavy-duty extruded aluminum
with a powder coating. Door hinge shall be full length and assembled
onto the door front. Available in black and clear.
Assembly Brackets: Shall be full depth, width and height of
the lockers. Brackets shall be made from PVC plastic and snap-fit
assembled onto locker sides. The snap-fit design offers a continuos
connection between componenets.
Coat Hooks: Shall be two-prong and made from high impact
plastic. Hooks shall be mounted to the bottom of the shelf, one each
per locker (Standard on Single, double & Triple tier lockers only.
Also
available:
athletic
lockers
and
school
cubbies
Warranty: Manufacturer shall warranty lockers, HDPE plastic
panels, doors and shelves against rust and other types of
corrosion, delamination or breakage under normal use for a period
of 15 years.
MATERIAL TESTING
Opening
Width
Depth
Height
Single Tier
12", 15'" 18" 12", 15", 18" 48", 60", 72"
48", 60", 72"
Double Tier
12", 15", 18" 12", 15", 18" 24", 30", 36"
48", 60", 72"
Triple Tier
12", 15", 18" 12", 15", 18"
20", 24"
60", 72"
Four Tier
12", 15", 18" 12", 15", 18"
15", 18"
60", 72"
Five Tier
12", 15"
12", 15", 18"
12"
60"
Six Tier
12", 15"
12", 15", 18"
12"
Overall
Height
All solid plastic components shall resist deterioration and
discoloration when subjected to any of the following:
• Acetic Acid 80% • Acetone
• Ammonia Liquid • Ammonium Phosphate
• Bleach 12% • Borax
• Brine • Caustic Soda
• Chlorine Water • Citric Acid
• Copper Chloride • Core Oils
• Hydrochloric Acid 40% • Hydrogen Peroxide 30%
• Isopropyl Alcohol • Lactic Acid 25%
• Lime Sulfur • Nicotine
• Potassium Bromide • Soaps
• Sodium Bicarbonate • Trisodium Phosphate
• Urea and Urine • Vinegar
Testing in accordance with corrosion testing procedure established
by the United States Plastic Corporation.
72"
53
America’s Most Complete Locker
4850 Hi-Tech Steel
Pedestal
Fabricated from 14 gauge
galvannealed sheet steel.
2-piece design allows for
concealed fastening.
Color: Parchment
Superior ® Benches, Pedestals & Locks
Line®
8032 Adjustable
Steel Pedestal
With cast
aluminum base
and concealed
anchoring to floor.
Color: Parchment
4850-S Hi-Tech Stainless
Steel Pedestal
Fabricated from 14 gauge
stainless steel. 2-piece design
allows for concealed fastening.
Color: Unpainted
4810 Heavy-Duty Cast
Iron Pedestal With 6”
diameter top and bottom.
Provided with three
anchoring holes at top
and bottom.
Color: Parchment
Shown with 4820 Pedestals
4820 Aluminum
Moveable Pedestal
Includes holes for
optional permanent
anchoring to floor.
Color: Parchment
Shown with 4810 Pedestals
Shown with 4850 Pedestals
Benchtop Length
Pedestals Required
3' - 8'
9' - 14'
15'
2
3
4
Note: Benchtop lengths over 15' will be supplied in sections
Locker Benches are 9-1/2” wide x 1-1/4” thick and made from laminated
all white northern hard maple. They are finished with one coat deep
penetrating hot sealer and two coats of heavy body high impact hot
hydraulically applied lacquer. Bench tops are standard in one foot
increments from 3’ thru 15’. Non-standard lengths are available on
special order (pedestal requirement will be for next standard size up).
List Industries recommends ZEPHYR® locks for use on all Superior Lockers.
Zephyr®
Built-In
Combination
Locks Available in
spring-bolt and
dead-bolt styles, are
key controlled and
include multiple
combination settings
Zephyr®
Combination
Padlocks
Available standard
and master-keyed,
padlocks can be
used on all locker
types
SAFE-O-MAT®
Built-In Coin,
Token and Card
Locks
Available in coin
return and coin
collect as well as
token collect and
card access styles
Zephyr®
Built-In Key
Locks
Available in
spring-bolt and
dead-bolt styles
and available
standard or
master-keyed
Digilock®
KT and
KP Series
Digital locks
allow access
using a
programmable
four-digit code
Zephyr®
1730
ADA
compliant
for use on
gravity
lift-type
latches
Hallowell
Digital
Locks
Digital locks
allow access
using a
programmable
four-digit code
Digilock®
T-Series
Digitally
controlled locks
allow access by
touching a key fob
to the lock which
automatically
unlocks the door.
NOTE: If using a lock on a locker intended to meet ADA guidelines, the lock and locker must both be ADA compliant.
54
Contact factory or visit our website at www.ListIndustries.com for our current Superior® locker and lock compatibility guide.
Superior ® Locker Accessories
America’s Most Complete Locker Line®
SPECIFICATIONS
1 - 6" Closed Front Base (KD lockers only): Shall be fabricated of 16 gauge cold rolled
sheet steel flanged on all four sides for rigidity. Front bases include projecting tabs on side flanges
designed to align with holes in front legs allowing front bases to be snapped into place requiring
no additional fasteners. Side bases are to be included at all exposed ends and are bolted to front
and rear legs. Finish to match lockers.
1
KD
2 - 4" Continuous Z-Base (KD lockers only): Shall be fabricated from 16 gauge cold rolled
sheet steel fabricated in 72" lengths, flanged at the top to form a 1-3/8" toe space and at the bottom
allowing concealed fastening to the finished floor. Continuous Front Bases include holes for use
with splice plates where bases are joined end-to-end. End Bases are to be included at all exposed
ends. Where additional support is desired, End Bases may be substituted for splices at Continuous
Front Base joints. Finish to match lockers.
3 - 20 gauge Individual Slope Top (KD lockers only): Not less than 20 gauge cold rolled
sheet steel, 18 degree pitch, fabricated to be installed individually over each locker. Slope top is
formed to include a full back. Individual Slope Tops are to be installed in addition to the locker flat
top. End closures are to be provided at exposed ends. Finish to match lockers.
2
KD
4 - 18 gauge Continuous Slope Top: Not less than 18 gauge cold rolled sheet steel, 18
degree pitch, in 72" lengths. A splice cover with concealed spring clip is to used to cover joints
where Continuous Slope Tops are joined end-to-end. To be installed in addition to the locker flat
top with end closures for support. Finish to match lockers.
4 - 16 Gauge Continuous Slope Top: Not less than 16 gauge cold rolled sheet steel, 18
degree pitch, in 72" lengths. A splice cover with concealed spring clip is to used to cover joints
where Continuous Slope Tops are joined end-to-end. To be installed in addition to the locker flat
top with end closures for support. Finish to match lockers.
5 - Recessed Trim: Fabricated of 16 gauge cold rolled sheet steel. 3" wide side trim shall be
notched at the top and include a retainer to allow the 3" wide top trim to fit snugly into the side trim.
Recess trim is designed to be used when the lockers are installed with the locker fronts flush with
the top and side walls. The top and side trim will project 3/8" beyond the side and top walls and
include return bends back to the walls. Finish to match lockers.
3
KD
6 - Minimum Punched End Panel (KD lockers only): Shall be from 18 gauge cold
rolled steel and formed to fit tightly over the universal side panel at exposed row ends. Holes are
provided at perimeter for fastening to locker. Minimum Punched End Panels are designed to cover
all fasteners other than those at the perimeter of the panel. Finish to match lockers. Provide at
all exposed ends.
7 - Boxed End Panel: Shall be "Boxed" type formed from 16 gauge cold rolled steel with 1"
O.D. double bends on sides and a single bend at top and bottom with no exposed holes or bolts.
If lockers have slope tops, end panels must be formed with slope at top to cover the ends of the
slope tops. Finish to match lockers. Provide at all exposed ends.
8 - Fillers: Provide where indicated, of not less than 16 gauge cold rolled sheet steel, factory
fabricated to and finished to match lockers.
Note: visit our website at www.ListIndustries.com for complete installation
details and instructions.
4
KD/Welded
5
KD/Welded
6
KD
7
KD/Welded
8
KD/Welded
55
America’s Most Complete Locker Line®
Know your List lockers
DOOR VENTILATION OPTIONS
Plain Doors
(Quiet)
Diamond
Louvered Doors Louvered Doors
Diamond Perforated
Security-Plus Doors Safety-View Doors
Perforated Doors
(See-thru
(Classic)
Doors
(Security Ventilation)
(With Door Stiffener)
Polycarbonate Insert)
(High Ventilation) (With Door Stiffener)
Galvanite™ Corrosion
Resistant Sheet Steel
prevents rust and corrosion
Safety-View Plus Box Doors
(See-thru Polycarbonate Door)
12" wide x 12" high
KD Box Doors only
™
Ideal for use in high humidity areas,
outdoor locations, near shower,
pool areas and food industry facilities.
Galvanite™ is List Industries’
trade marked name for
lockers and cabinets
Galvanite™ cold rolled sheet
steel with our powder coat
finish after a 336 hour salt
spray test.
manufactured with galvanneal sheet
steel components and finished with an
electrostatically applied high-grade
powder coat finish. Galvanite and
powder coat offer exceptional double
protection against corrosion, even under
the most adverse conditions. Tests
indicate that galvanneal increases the
estimated
WHAT IS GALVANNEAL?
Common cold rolled sheet
steel after a 336 hour salt
spray test.
See page 88 for
Galvanite Lockers
56
Galvanneal is the result of the combined
processes of galvanizing (hot-dipped zinc
coating) and annealing (heat treatment).
Galvanneal does not flake off its galvanized
coating when formed, stamped, and bent.
The very fine matte finish acts like a primer
that easily adheres to paint. These
characteristics make galvannealed sheet
steel ideal for steel lockers in high humidity,
corrosion prone areas.
Specially formulated powder
coat finish that contains an
additive that protects against
bacteria, mold, yeast & mildew
for up to 20 years!
The antimicrobial
additive used in our MedSafe
paint finish proves toxic to
many microorganisms.
Depending on the
microorganism, the
antimicrobial technology
has been shown to initially
reduce microorganism
growth within minutes to hours
while maintaining optimal
performance for up to 20 years.
See page 90 for
MedSafe Lockers
Color Selection
America’s Most Complete Locker Line®
choose from 24 designer powder coat colors.
two-tone color combinations for your production
lockers is available at no additional cost.
Choose from doors one color and frame a second color to add
more visual impact to any decoration or design project.
All surfaces shall be thoroughly cleaned
with a seven stage hot-spray washing
process and coated with an insoluble
iron phosphate film.
A high grade of custom powder is applied
by a computer controlled, highly efficient
electrostatic paint system. The product is
cured for 20 minutes at 350 degrees through
a continuous baking oven to provide
maximum paint adhesion, tough durability
and a smooth paint finish.
All body components of production KD
lockers will be painted our standard
neutral color, currently Parchment
(Choice of Parchment or Hallowell Gray
for HDV body components only).
Metal Locker Color Selection
714 Snow White
708 Midnight Ebony
736 Sport Silver
711 Platinum
706 Heather
725 Hallowell Gray
738 Charcoal
729 Parchment
713 Sand Beige
710 Sandstone
723 Trophy
737 Forest Gold
728 Hoop
721 Relay Red
727 Maroon
720 Pep Rally
719 Jersey
731 Denim
717 Grand Slam
707 Marine Blue
722 Tidal Wave
705 Green Mist
735 Basil
704 Evergreen
Colors shown are an approximate
representation of the actual color.
Please do not make your final
color selection from printed media
or internet images, as they may
not be 100% accurate.
For a more accurate
color selection call
800-776-1342
or e-mail us at
info@ListIndustries.com
to request a full set of our
master metal color samples.
In the interest of safety, all Superior lockers, cubbies and shelving must be securely anchored to the floor and/or wall.
List Industries Inc. reserves the right to make changes to the information, illustrations, products, services, specifications, availability, plans,
and terms and conditions associated with this catalog at any time, without notice, and without incurring obligations or liability of any kind.
57
OPEN SHELVING-MEDIUM, HEAVY
AND EXTRA HEAVY-DUTY
America’s Most Complete Locker Line®
Open Starter Units Include:
Two beaded front posts, two angle back posts, one
pair of back sway braces, two pair of side sway
braces and shelves with shelf clips applicable to
unit ordered.
Open Adder Units Include:
One beaded front post, two angle back posts, one
pair of back sway braces, one pair of side sway
braces and shelves with shelf clips applicable to
unit ordered.
Box beam adjustable shelves
COLOR
SELECTION
725
Hallowell Gray
(HG)
Heavy Duty
Shelves
• Tubular welded box beam front and
rear for maximum strength
• Exclusive triple bend side flanges
for added strength
• Lapped and welded corners
• Punched to accept shelf dividers
• Uses four one piece shelf clips per shelf
• Can be installed together with both
Beaded Front and Angle Back Posts
as well as T-Posts and H-Posts
58
Angle Back
Posts and
T-Posts
• Roll formed into a unique angle shape
for maximum strength
• The long leg is punched on 1-1/2"
centers to allow independent shelf
adjustment
• Angle Posts can be used in place of
Beaded Front Posts if desired
CLOSED SHELVING-MEDIUM, HEAVY
AND EXTRA HEAVY-DUTY
America’s Most Complete Locker Line®
Closed Starter Units Include:
Two beaded front posts, two angle back posts,
one set of back panels, two sets of side panels and
shelves with shelf clips applicable to unit ordered.
Closed Adder Units Include:
One beaded front post, two angle back
posts, one set of back panels, one set of
side panels and shelves with shelf clips
applicable to unit ordered.
Box beam adjustable
shelves
Base strip closes
bottom to prevent
debris accumulation
Beaded Front
Posts
• Beaded for strength
• Flush to permit straight-in/straightout shelf installation, shelf
changing and shelf loading.
No tilting needed
• Get the full use of shelf area
• Punched on 1-1/2" centers to allow
positioning of one shelf
independent of other shelves
H-Posts
• Designed for high-density
applications
• More than twice the
capacity of standard posts
• Used at front and back
• Used with standard
Hi-Tech components
Optional swinging
doors allow
cabinet-style storage
Shelf dividers for
organized storage
One Piece
Shelf Clip
• Each shelf requires four of these
sturdy and compact clips
• Clips key firmly into post slots
to hold shelves securely in place
• Fits Beaded Front, Angle
Back Posts and T-Posts
• Provides independent shelf
positioning on 1-1/2" centers
• Non-Intrusive clip sits flush with
inside edge of front posts
59
America’s Most Complete Locker Line®
OPEN SHELVING-MEDIUM, HEAVY
AND EXTRA HEAVY-DUTY
5-Shelf Unit
6-Shelf Unit
8-Shelf Unit
Shelf
W
D
H
SKU No.
SKU No.
SKU No.
Capacity*
Medium-Duty
36
12
87
Starter
4510-12
4511-12
4513-12
500*
36
12
87
Adder
A4510-12
A4511-12
A4513-12
500*
36
18
87
Starter
4510-18 4511-184513-18
500*
36
18
87
Adder
A4510-18
A4511-18
A4513-18
500*
36
24
87
Starter
4510-244511-24 4513-24
500*
36
24
87
Adder
A4510-24
A4511-24
A4513-24
500*
Open Type 48
12
87
Starter
4710-12 4711-12 4713-12
375*
Starter
48
12
87
Adder
A4710-12
A4711-12
A4713-12
375*
48
18
87
Starter
4710-18
4711-18 4713-18
375*
48
18
87
Adder
A4710-18
A4711-18
A4713-18
375*
48
24
87
Starter
4710-24
4711-24
4713-24
350*
48
24
87
Adder
A4710-24
A4711-24
A4713-24
350*
Heavy-Duty
36
12
87
Starter
5510-12
5511-12 5513-12
800*
36
12
87
Adder
A5510-12
A5511-12
A5513-12
800*
36
18
87
Starter
5510-18 5511-18
5513-18
800*
36
18
87
Adder
A5510-18
A5511-18
A5513-18
800*
36
24
87
Starter
5510-24
5511-24
5513-24
800*
Open 36
24
87
Adder
A5510-24
A5511-24
A5513-24
800*
Type Adder 48
12
87
Starter
5710-12
5711-12
5713-12
400*
48
12
87
Adder
A5710-12
A5711-12
A5713-12
400*
48
18
87
Starter
5710-18
5711-18 5713-18
450*
48
18
87
Adder
A5710-18
A5711-18
A5713-18
450*
48
24
87
Starter
5710-24
5711-24 5713-24
500*
48
24
87
Adder
A5710-24
A5711-24
A5713-24
500*
Extra Heavy-Duty Duty
36
12
87
Starter
7510-12
7511-12
7513-12
1100*
36
12
87
Adder
A7510-12
A7511-12
A7513-12
1100*
36
18
87
Starter
7510-18
7511-18
7513-18
1200*
36
18
87
Adder
A7510-18
A7511-18
A7513-18
1200*
5 Shelves
36
24
87
Starter
7510-24
7511-24
7513-24
1250*
36
24
87
Adder
A7510-24
A7511-24
A7513-24
1250*
48
12
87
Starter
7710-12
7711-12 7713-12
750*
48
12
87
Adder
A7710-12
A7711-12
A7713-12
750*
48
18
87
Starter
7710-18
7711-18
7713-18
900*
48
18
87
Adder
A7710-18
A7711-18
A7713-18
900*
48
24
87
Starter
7710-24
7711-24 7713-24
900*
48
24
87
Adder
A7710-24
A7711-24
A7713-24
900*
6 Shelves
Additional Shelves
Medium-Duty
Heavy-Duty Extra Heavy-Duty
36
12
5135-3612
5138-3612
5139-3612
See Above
36
18
5135-3618
5138-3618
5139-3618
See Above
36
24
5135-3624
5138-3624
5139-3624
See Above
48
12
5135-4812
5138-4812
5139-4812
See Above
48
18
5135-4818
5138-4818
5139-4818
See Above
48
24
5135-4824
5138-4824
5139-4824
See Above
8 Shelves
60
NOTES: Color for all components 725 Hallowell Gray
Open units:
Starter units include two beaded front posts, two angle back posts, one pair back sway braces, two pair side sway
braces and 5-8 shelves. Adder units include one beaded front post, two angle back posts, one pair back sway braces, one pair side sway braces and 5-8 shelves.
CLOSED SHELVING-MEDIUM, HEAVY
AND EXTRA HEAVY-DUTY
America’s Most Complete Locker Line®
5-Shelf Unit
6-Shelf Unit
8-Shelf Unit
Shelf
W
D
H
SKU No.
SKU No.
SKU No.
Capacity*
Medium-Duty
36
12
87
Starter
4520-12
4521-12
4523-12
500*
36
12
87
Adder
A4520-12
A4521-12
A4523-12
500*
36
18
87
Starter
4520-18
4521-18
4523-18
500*
36
18
87
Adder
A4520-18
A4521-18
A4523-18
500*
36
24
87
Starter
4520-24
4521-24 4523-24
500*
36
24
87
Adder
A4520-24
A4511-24
A4523-24
500*
48
12
87
Starter
4720-12
4721-12 4723-12
375*
48
12
87
Adder
A4720-12
A4721-12
A4723-12
375*
48
18
87
Starter
4720-18 4721-18
4723-18
375*
48
18
87
Adder
A4720-18
A4721-18
A4723-18
375*
48
24
87
Starter
4720-24
4721-24
4723-24
350*
48
24
87
Adder
A4720-24
A4721-24
A4723-24
350*
Heavy-Duty
36
12
87
Starter
5520-12 5521-12
5523-12
800*
36
12
87
Adder
A5520-12
A5521-12
A5523-12
800*
36
18
87
Starter
5520-185521-18
5523-18
800*
36
18
87
Adder
A5520-18
A5521-18
A5523-18
800*
36
24
87
Starter
5520-24 5521-24 5523-24
800*
36
24
87
Adder
A5520-24
A5521-24
A5523-24
800*
48
12
87
Starter
5720-12
5721-12 5723-12
400*
48
12
87
Adder
A5720-12
A5721-12
A5723-12
400*
48
18
87
Starter
5720-18
5721-18 5723-18
450*
48
18
87
Adder
A5720-18
A5721-18
A5723-18
450*
48
24
87
Starter
5720-24
5721-24
5723-24
500*
48
24
87
Adder
A5720-24
A5711-24
A5723-24
500*
Extra Heavy-Duty Duty
36
12
87
Starter
7520-12
7521-12
7523-12
1100*
36
12
87
Adder
A7520-12
A7521-12
A7523-12
1100*
36
18
87
Starter
7520-18 7521-18
7523-18
1200*
36
18
87
Adder
A7520-18
A7521-18
A7523-18
1200*
36
24
87
Starter
7520-24 7521-24 7523-24
1250*
36
24
87
Adder
A7520-24
A7521-24
A7523-24
1250*
48
12
87
Starter
7720-12
7721-12 7723-12
750*
48
12
87
Adder
A7720-12
A7721-12
A7723-12
750*
48
18
87
Starter
7720-18
7721-18 7723-18
900*
48
18
87
Adder
A7720-18
A7721-18
A7723-18
900*
48
24
87
Starter
7720-24 7721-24 7723-24
900*
48
24
87
Adder
A7720-24
A7721-24
A7723-24
900*
Additional Shelves
Medium-Duty
Heavy-Duty Extra Heavy-Duty
36
12
5135-3612
5138-3612
5139-3612
See Above
36
18
5135-3618
5138-3618
5139-3618
See Above
36
24
5135-3624
5138-3624
5139-3624
See Above
48
12
5135-4812
5138-4812
5139-4812
See Above
48
18
5135-4818
5138-4818
5139-4818
See Above
48
24
5135-4824
5138-4824
5139-4824
See Above
NOTES: Color for
Closed units:
all components 725 Hallowell Gray
Closed
Type
Starter
Closed
Type
Adder
8 Shelves
Starter units include two beaded front posts, two angle back posts, one back panel, two side panels and
5-8 shelves. Adder units include one beaded front post, two angle back posts, one back panel assembly, one side panel
assembly and 5-8 shelves.
61
America’s Most Complete Locker Line®
system LAYOUT INFORMATION
Standard Shelving with Hi-Tech Shelves
See pages 58-63
d
nominal
SHELF WIDTH
nominal
SHELF WIDTH
+ 1-3/16”
nominal
SHELF WIDTH
+ 1/2”
+ 1/2”
PLUS ADD 3/4” PER ROW
nominal
SHELF WIDTH
FOR “D” - SINGLE FACE ADD 3/16” TO NOMINAL SHELF DEPTH
FOR “D” - DOUBLE FACE ADD 3/8” TO NOMINAL SHELF DEPTH
+ 1/2”
H-Post Shelving with Hi-Tech Shelves
See pages 64-65
d1
nominal
SHELF WIDTH
+ 2-13/16”
nominal
SHELF WIDTH
+ 1-5/16”
nominal
SHELF WIDTH
+ 1-5/16”
nominal
SHELF WIDTH
+ 1-5/16”
PLUS ADD 1-1/2” PER ROW
FOR ‘D1” - SINGLE FACE ADD 5/16” TO NOMINAL SHELF DEPTH
FOR “D1” - DOUBLE FACE CLOSED MODELS ADD 13/16” TO NOMINAL SHELF DEPTH
FOR “D1” - DOUBLE FACE OPEN MODELS ADD 29/32” TO NOMINAL SELF DEPTH
NOTE: sHELF WIDTH IS 5/16” UNDER NOMINAL
COLOR
SELECTION
NOTE: Width of posts should be added to the nominal shelf width in any floor plan to determine
the overall shelving width.
Check “D” and “D1” dimensions for depth/creepage.
62
725
Hallowell Gray
(HG)
America’s Most Complete Locker Line®
UNIT LOAD CAPACITY INFORMATION - 1.65 SAFETY FACTOR
LOAD UNIT
(000. LBS)
h-post
12”
24”
H - 15,000 LBS
(B–2) x A
A
B
30”
= Unit Load
= Shelf Load
= Shelves per unit
(includes top and bottom shelves)
WARNING: Use H-Posts for:
• High-rise applications.
• Pass-through
applications regardless
of load.
• High-density, multi-level
applications.
S-4,000 LBS
S - 5,000 LBS
S - 6,700 LBS
18”
H - 15,500 LBS
H - 16,000 LBS
H - 16,500 LBS
S - 7,600 LBS
H - 16,800 LBS
Before selecting type of post,
consideration should be given to
loads to be carried. Use the
formula below to get unit load,
then select post type from table.
S - 8,300 LBS
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
standard post
36”
shelf spacing
TYPICAL SWAY BRACE
INSTALLATIONS
FOR SEISMIC ZONE NO. 0
Standard Shelving (Beaded Front Posts)
High-Density Shelving (H-Posts)
7’ 3”
8’ 3”
To
10’ 3”
7’ 3”
8’ 3”
To
10’ 3”
Use of Side Sway Braces
Use of Back Sway Braces
(Part No. 5344 – Standard Shelving)
(Part No. 5342) for both standard
(Part No. 5341–High-Density Shelving) and high density shelving
NOTES: 1-When splicing posts for increased heights or for multi-level shelving, use the proper
number of braces required for the height of the posts being added.
Example: a 10’-3” model increased another 10’-3” in height would require 4 sets of side
sway braces and 4 sets of back braces. 2-For additional bracing requirements in Seismic
Zones No. 2, 3 and 4, consult the Hallowell Applications Engineering Department.
63
H-POST provides twice
the capacity
America’s Most Complete Locker Line®
H-Post High capacity Shelving is ideal when additional strength is
required for any shelving installation. It is also recommended for
multi-high-rise applications.
H-Posts are fabricated from 14 gauge cold rolled steel and formed into
a unique tubular design to provide more than twice the load capacity
compared to our standard posts.
One Piece Shelf Clip
• Each shelf requires four of these sturdy and
compact clips
• Clips key firmly into post slots to hold shelves
securely in place
• Also fits Beaded Front, Angle Back Posts and
T-Posts
• Provides independent shelf positioning on
1-1/2" centers
• Non-Intrusive clip sits flush with inside edge of
H-Posts
• Designed for high-density
applications
• More than twice the
capacity of standard posts
• Used at front and back
• Used with standard
Hi-Tech components
closed UNITS
COLOR
SELECTION
711
Platinum (PL)
H-POST
COLOR
SELECTION
707
725
Marine Blue
Hallowell
Gray
(MB)
(HG)
8 Shelf Unit
64
6 Shelf Unit
5 Shelf Unit
use with standard
hi-tech components
America’s Most Complete Locker Line®
open UNITS
8 Shelf Unit
6 Shelf Unit
5 Shelf Unit
ADDER UNITS
All models shown
with the standard
heavy-duty foot plate
that provides
a strong and secure
anchoring point
Special triple
point brace clip
provides a strong
and ridged anchor
point for the
cross braces.
Adder units are available in
open and closed versions.
available in 7' and 10' high units
65
America’s Most Complete Locker Line®
MULTI-LEVEL
HIGH-RISE SHELVING
SYSTEMS
SHELVING SPECIFICATIONS
Beaded Front Posts: Fabricated from 14 gauge cold
rolled steel and roll formed into an 11/16" wide x 2-9/16" deep
tubular section. Rear flanges are welded on 6" centers to
provide maximum strength. Sides of the post are punched
1-1/2" on center with 3/8" x 7/8" rectangular slots to receive
shelf clip. Rear flanges of the post have holes punched on 3"
centers for the attachment of side sway braces or field attached
solid side panels. Provide (1) Beaded Front Post between each
adjoining section and at row ends.
Complete high-rise
modular systems make
it easy to create that
perfect shelving
solution to maximize
space in any facility.
Angle Back Posts: Fabricated of 14 gauge cold rolled
steel and roll formed into a modified unequal angle shape. The
long leg shall have holes punched on 1-1/2" centers with 3/8"
x 7/8" rectangular slots to receive shelf clip. The leading edge
shall have holes punched on 3" centers for the attachment of
side sway braces. The short leg shall have holes punched on
3” centers for the attachment of back sway braces or back
panels. Provide (1) Angle Back Post at each row end for
open-type shelving applications.
Consult your sales
representative for more
information or contact us at:
info@ListIndustries.com
T-Posts: Shall be fabricated of two angle back posts. The
posts are welded together back-to-back to form a "T". Welds
are on 6" centers for maximum strength. Posts are used for
intermediate back post applications. Provide (1) T Post between
each adjoining section for open-type shelving applications.
H-Posts: Fabricated from 14 gauge cold rolled steel
and roll formed into an 1-1/2” wide x 2-15/16” deep tubular
section. Rear flanges are welded on 6” centers to provide
maximum strength. Sides of the posts are punched 1-1/2” on
center with 3/8” x 7/8” rectangular slots to recieve shelf clip.
Rear flanges of the posts have holes punched on 3” centers for
attachment of side sway braces or field attached solid side
panels. Post front is slotted on 3” centers for beam connection and
combination clip attachment and is punched on 3” centers for
field attach back connector strips. provide (2) H-Posts between
each adjoing section and at row ends.
Standard Post Splice Channels: Fabricated from
16 gauge cold rolled steel and formed into a 11/32" x 1-1/8"
x 11/32" channel. 1-1/8" flange is punched with four holes for
assembling to upper and lower posts. Provide at all post
splices when additional height is required.
Side Sway Braces: 1" x 11 gauge cold rolled steel strip
with safety edges to eliminate sharpness. The center of two
identical pieces shall be punched to be bolted together forming
an "X". Ends shall be radiused and punched for attaching to
front and back posts. Provide between adjoining sections and
at row ends for open-type shelving applications.
when the only way
to go is up!
66
Back Sway Braces: 1" x 11 gauge cold rolled
steel strip with safety edges to eliminate sharpness. The
center of two identical pieces shall be punched to be bolted
together forming an "X". Ends shall be radiused and punched
for attaching to two back posts. Provide at back of all
open-type shelving applications.
America’s Most Complete Locker Line®
Back Panels: Fabricated from 24 gauge cold rolled sheet
steel. The two outer edges and the center shall be punched
with 5/16" diameter holes on 1" centers running vertically for
assembling to back posts. The center row is used to attach to
rear of shelf using Back Clips. Provide at back of closed-type
shelving sections. Multiple sections will be provided to achieve
height. H-Post back panels shall be 18 gauge.
Side Panels: Fabricated from 24 gauge cold rolled sheet
steel, field bolted to front and back posts. Provide at all side
locations for closed shelving sections.Multiple sections will be
provided to achieve height. H-Post side panels shall be 18
gauge.
End Panels: Fabricated from 24 gauge cold rolled sheet
steel,factory bolted to a Beaded Front Post and an Angle Back
Post. Provide at row ends of closed-type shelving applications
or where closed ends are desired on open-type shelving
applications. H-Post end panels shall be 18 gauge.
Foot Plates: 2-1/4" x 3-1/2" x 12 gauge steel plate with
angle bracket welded on top. The angle bracket is punched for
fastening to front and back posts. The plate shall have a 7/16"
diameter hole punched on one end for floor anchoring and be
embossed on the other end for Shim Plate alignment. Provide
as required for floor anchoring or when shimming is required
for a level installation.
Shim Plates: 2-1/4" x 3-1/2" x 16 gauge cold rolled
sheet steel. Fabricated to fit under the Foot Plate. One end
is embossed to fit into the embossment in the Foot Plate
to keep them properly aligned. The other end shall have
a 7/16" diameter hole to allow floor anchoring. Provide as
required when shimming is required for a level installation.
Shelves: Formed with two ribs along the horizontal front
and rear edge and are stamped on the top left corner for
identification. Shelves are fabricated from cold rolled steel
and have roll formed rectangular tubular shaped front and rear
edges with return bends resistance welded to the under side
of shelf. Welds are spaced 3" on center to provide maximum
strength. Sides are triple flanged to form a channel. All four
corners are lapped and resistance welded to provide a rigid
corner and add extra strength to the shelf. Top surface shall be
punched for attaching Shelf Dividers from left to right on 1-1/2"
centers, front and back, for 36" wide x 12", 15", 18" and 24"
deep shelves. All other sizes are punched on 3" centers. Front
and rear surfaces are punched for attaching accessories.
Tubular front edge is designed to protect against impact loads.
Medium Duty: For uniformly distributed loads up to 500 lbs.
Heavy Duty: For uniformly distributed loads up to 800 lbs.
Extra Heavy Duty: For uniformly distributed loads up to 1,200 lbs.
Universal Clip: Fabricated from 16 gauge cold rolled
steel formed into an angle with three slotted holes on one
flange and one long slot in the other flange, which is also offset
to fit in Beaded Front Post. Provide when Swinging Doors are
required.
Base Strip: Made from 22 gauge cold rolled steel offset at top
to fit behind the front flange of shelf. Punched for bolting to holes
in the front flange of shelf. Bottom is flanged to resist bending.
Label Holders: Made from 22 gauge cold rolled
steel. Punched on ends and center for attaching to the front
edge of shelves with top and bottom edges folded over to
accommodate labels approximately 1" high.
Bin Fronts: Fabricated from 18 gauge cold rolled steel.
The top edge is formed into a bead. The bottom shall be
triple flanged to telescope over shelf flange and punched to
provide a means of attaching to shelf.
Full Dividers: Fabricated from 24 gauge cold rolled steel.
The front edge is beaded. Top and bottom shall be flanged and
punched to provide a means of attaching to shelves. The back
edge is flanged to provide rigidity. Dividers are installed using
snap-in nylon fasteners.
Partial Dividers: Fabricated from 22 gauge cold rolled
steel. The top corners are radiused for increased safety. The
bottom flange is punched to provide a means of attaching to
shelf. Dividers are installed using snap-in nylon fasteners.
Swinging Doors: Fabricated from 20 gauge cold rolled
steel with box flanges on all four edges. Swinging doors
shall be reinforced with a steel pan type panel inside the
door. Doors are bolted to a welded door frame consisting
of top and bottom channels and angles at the sides. The
door frame side angles are punched on 1" centers for
attachment. Universal Clips shall be supplied to attach
door & frame assembly to the Beaded Front Posts. One
chrome finished turn handle with built-in cylinder key lock
shall be included providing three point positive locking.
Optional
Swinging
Doors
Shelf Clips: Shall be a one piece compression clip drawn
from 13 gauge cold rolled steel and zinc plated. Fits snugly against
side of post to hold shelves in place. Provide four per shelf.
67
HALLOWELL®
™
America’s Most Complete Locker Line®
pass-thru industrial
grade steel shelving
OUR UNIQUE GRIP NUT
DESIGN CREATES A
VERY STRONG AND
RIGID STRUCTURE
Pass-thru Steel
Shelving requires
NO CROSS BRACES
Unique design creates
a very strong unit!
DuraTech is Hallowell’s newest line of pass-thru steel
shelving requiring no cross braces allowing access
from all sides while providing the maximum strength,
durability and stability needed to handle most industrial
applications. DuraTech offers versatility and durability
for today’s modern facilities.
Our complete line of shelving is designed and
engineered to the highest standards.
Features:
• Access from all 4 sides
• Top and bottom firmly attached with steel-grip nuts
for superior strength
• Available in 5, 7 and 8 shelf models
• Four Angle Posts are used per section allowing units
to be individually located, bolted side-by-side or
bolted back-to-back.
• Each intermediate shelf uses four sturdy and
compact clips
• Clips key firmly into post slots to hold shelves
securely in place
• Provides independent positioning of intermediate
shelves on 1-1/2” centers
• Bottom shelf is positioned to prevent debris from
collecting beneath unit
COLOR
SELECTION
725
Hallowell Gray
(HG)
68
See available sizes,
technical information
and models on pages
70 and 71.
360º access creates a more
efficient storage system!
pass-thru industrial
grade steel shelving
5-SHELF UNIT
3-adjustable shelves
America’s Most Complete Locker Line®
7-SHELF UNIT
5-adjustable shelves
8-SHELF UNIT
6-adjustable shelves
DURATECH PASS-THRU STEEL SHELVING SPECIFICATIONS
DURA-TECH PASSS-THRU STEEL SHELVING SPECIFICATIONS
Angle Posts: Fabricated of 14 gauge cold rolled steel and roll
formed into a modified unequal angle shape. The long leg shall have
holes punched on 1-1/2” centers with 3/8” x 7/8” rectangular slots to
receive shelf clip. Provide (4) Angle Posts at each unit.
Top and bottom shelves: Fabricated from 18 gauge cold rolled
steel and are triple flanged at all four sides. All four corners are punched
to allow top and bottom shelves to be securely bolted to angle posts
using specially designed shoulder bolts and steel-grip nuts. Minimum
four nuts and bolts per corner. Used for uniformly distributed loads up
to 800 pounds.
Heavy-Duty Intermediate Shelves: Formed with two ribs along
the horizontal front and rear edge and are stamped on the top left
corner for identification. Class 1 shelves are fabricated from heavy
gauge cold rolled steel and have roll formed rectangular tubular
shaped front and rear edges with return bends resistance welded to the
under side of shelf. Welds are spaced 3” on center to provide maximum
strength. Sides are triple flanged to form a channel. All four corners
are lapped and resistance welded to provide a rigid corner and add
extra strength to the shelf. Top surface shall be punched for attaching
Shelf Dividers from left to right on 1-1/2" centers, front and back, for 36”
wide x 12”, 15”, 18” and 24” deep shelves. All other sizes are punched
on 3” centers. Front and rear surfaces are punched for attaching
accessories. Tubular front edge is designed to protect against impact
loads. Used for uniformly distributed loads up to 800 pounds. Medium-Duty
intermediate shelves with capacities up to 500 pounds and Extra
Heavy-Duty intermediate shelves with capacities up to 1,200 pounds
are also available.
Shelf Clips: Shall be a one piece compression clip drawn from
13 gauge cold rolled steel and zinc plated. Fits snugly against side
of post to hold shelves in place. Provide four per intermediate shelf.
Foot Plates: 2-1/4” x 3-1/2” x 12 gauge steel plate with angle
bracket welded on top. The angle bracket is punched for fastening to
front and back posts. The plate shall have a 7/16” diameter hole punched
on one end for floor anchoring and be embossed on the other end for
Shim Plate alignment. Provide as required for floor anchoring or when
shims are required for a level installation.
Shim Plates: 2-1/4” x 3-1/2” x 16 gauge cold rolled sheet steel.
Fabricated to fit under the Foot Plate. One end is embossed to fit into
the embossment in the Foot Plate to keep them properly aligned. The
other end shall have a 7/16” diameter hole to allow floor anchoring.
Provide as required when shimming is required for a level installation.
69
HALLOWELL®
pass-thru industrial
grade steel shelving
™
America’s Most Complete Locker Line®
Fixed Top Shelf for
maximum strength using
a bolt and grip nut
Fully adjustable
intermediate shelves
adds versatility
4 bolts at each corner top and
bottom provide a very strong
frame for maximum strength
Fixed bottom shelf
adds more rigidity,
provides closed base
All Units Include: Four angle posts, two DuraTech bolt-in shelves to be
used at unit top and bottom and intermediate adjustable shelves with shelf
clips applicable to unit ordered. All DuraTech shelving units are free
standing and can be joined end-to-end or back-to-back.
5 SHELF - 36" WIDE X 7'-3" HIGH UNITS
3-ADJUSTABLE SHELVES
5-Shelf
Model DT5510
Model # W
D
H
DT5510-12 36''
DT5510-18 36''
DT5510-24 36''
DT5510-30 36''
DT5510-36 36''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
5 SHELF - 42" WIDE X 7'-3" HIGH UNITS
3-ADJUSTABLE SHELVES
Capacity
Per Shelf
800
800
800
500
500
5-Shelf
Model DT5610
Model # W
D
H
DT5610-12 42''
DT5610-18 42''
DT5610-24 42''
DT5610-30 42''
DT5610-36 42''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
600
600
600
625
475
7 SHELF - 36" WIDE X 7'-3" HIGH UNITS
5-ADJUSTABLE SHELVES
7-Shelf
Model DT5512
Model # W
D
H
DT5512-12 36''
DT5512-18 36''
DT5512-24 36''
DT5512-30 36''
DT5512-36 36''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
7 SHELF - 42" WIDE X 7'-3" HIGH UNITS
5-ADJUSTABLE SHELVES
Capacity
Per Shelf
800
800
800
500
500
7-Shelf
Model DT5612
8-Shelf
Model DT5513
70
H
DT5513-12 36''
DT5513-18 36''
DT5513-24 36''
DT5513-30 36''
DT5513-36 36''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
800
800
800
500
500
H
DT5612-12 42''
DT5612-18 42''
DT5612-24 42''
DT5612-30 42''
DT5612-36 42''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
600
600
600
625
475
8 SHELF - 42" WIDE X 7'-3" HIGH UNITS
6-ADJUSTABLE SHELVES
8 SHELF - 36" WIDE X 7'-3" HIGH UNITS
6-ADJUSTABLE SHELVES
Model # W
D
Model # W
D
8-Shelf
Model DT5613
Model # W
D
H
DT5613-12 42''
DT5613-18 42''
DT5613-24 42''
DT5613-30 42''
DT5613-36 42''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
600
600
600
625
475
pass-thru industrial
grade steel shelving
America’s Most Complete Locker Line®
DURATECH ANGLE POSTS
Top and bottom shelves
attach with bolts at each
corner providing a strong
and rigid structure
Bottom shelf is positioned
to prevent debris from
collecting beneath unit
• Roll formed into a unique angle shape for
maximum strength
• The long leg is punched on 1-1/2” centers
to allow independent shelf adjustment
• Four Angle Posts are used per section
allowing units to be individually located,
bolted side-by-side or bolted back-to-back.
DURATECH ONE PIECE
SHELF CLIP
• Each intermediate shelf requires four sturdy
and compact clips
• Clips key snugly into post slots to hold
shelves securely in place
• Provides independent positioning of
intermediate shelves on 1-1/2” centers
Top and bottom firmly
attached with steel-grip
nuts for superior strength
Compression Shelf Clip
for intermediate shelves
5 SHELF - 48" WIDE X 7'-3" HIGH UNITS
3-ADJUSTABLE SHELVES
5-Shelf
Model DT5710
Model # W
D
H
DT5710-12 48''
DT5710-18 48''
DT5710-24 48''
DT5710-30 48''
DT5710-36 48''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
400
450
500
500
500
7 SHELF - 48" WIDE X 7'-3" HIGH UNITS
5-ADJUSTABLE SHELVES
7-Shelf
Model DT5712
Model # W
D
H
DT5712-12 48''
DT5712-18 48''
DT5712-24 48''
DT5712-30 48''
DT5712-36 48''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
400
450
500
500
500
8 SHELF - 48" WIDE X 7'-3" HIGH UNITS
6-ADJUSTABLE SHELVES
8-Shelf
Model DT5713
Model # W
D
H
DT5713-12 48''
DT5713-18 48''
DT5713-24 48''
DT5713-30 48''
DT5713-36 48''
7'3''
7'3''
7'3''
7'3''
7'3''
12''
18''
24''
30''
36''
Capacity
Per Shelf
400
450
500
500
500
DURATECH HEAVY DUTY
INTERMEDIATE SHELVES
• Tubular flange front and rear for greater
strength
• Exclusive triple bend side flanges for added
strength
• Lapped and welded corners
• Available in three load capacity classes up
to 48” wide spans and 36” depths
• Top of shelf is punched to accept shelf
dividers
• Uses four one piece shelf clips per shelf
DURATECH TOP/BOTTOM
SHELVES
• Triple flanged at all four sides for maximum
rigidity, durability and stability
• Bottom shelf is positioned to close space to
floor preventing debris from collecting
beneath
• Bolted to angle posts at all four corners
using special bolts and steel-grip nuts
preventing unit sway without the use of
intrusive sway bracing for complete
4-sided access
All units shown include Hallowell heavy-duty intermediate shelves.
Medium-Duty and Extra Heavy-Duty units are also available.
71
™
America’s Most Complete Locker Line®
boltless steel shelving
BY HALLOWELL®
Boltless shelving is designed
to maximize storage space and
minimize installation set-up time.
All components are engineered to attach snugly to one another
without the use of loose fasteners. This unique design has rivets which
are factory attached to all left-to-right and front-to-back beams.
The rivets align with keyhole slots in the vertical posts. Once tapped
into place using a standard rubber mallet, the units are tightly
assembled providing maximum strength.
Standard units consist of vertical angle posts at the corners, double
rivet angle beams at the top and bottom perimeter and single rivet angle
beams running left-to-right only at the intermediate levels. Shelves are
of standard 5/8” particle board, EZ-Deck steel or wire decking and simply
drop into place. Shelf strength can be increased by upgrading to heavy duty beams,
adding single rivet beams running front-to-back at the intermediate levels, upgrading
to double rivet beams at the full perimeter of the intermediate levels or upgrading all
levels to our strongest double rivet channel beams. Optional center supports can be
added using supplied hardware to increase decking capacity.
Double Rivet unit
with 5 levels
The versatility of our Rivetwell boltless shelving system
allows you to mix and match components to meet your unique
application. From standard storage applications, record storage
to automotive tire racks, Rivetwell boltless shelving is your
storage solution.
Easy Assembly!
COLOR
SELECTION
Single Rivet unit
with 5 levels
72
Double Rivet unit
with 4 levels
729
Parchment (PT)
boltless steel shelving
1 Angle Post
2 T-Post
America’s Most Complete Locker Line®
1 Angle Post (Standard Duty): 1-1/2" x 1-1/2" x 14 gauge cold
rolled steel corner post uprights. Perfect for standard
load situations.
Angle Post (Heavy Duty): Shall be 1-7/8" x 1-7/8" x 14 gauge
cold rolled steel uprights. The choice when heavy duty
shelving is required. Perfect for multilevel installations.
2 T-Post (Standard Duty): 3" x 1-7/8" x 14 gauge cold rolled
steel intermediate uprights.
T-Post (Heavy Duty): 3-3/4" x 1-7/8" x 14 gauge cold rolled
steel intermediate uprights.
3 Single Rivet Shelf Beam (Standard Duty): This 14 gauge
low profile standard intermediate level shelf beam is perfect when
maximum clear opening is required between shelf levels.
3 Single Rivet
Shelf Beam
Single Rivet Shelf Beam (Heavy Duty): An 11 gauge
heavy duty version of our low profile intermediate shelf beam
allowing maximum clear opening between shelf levels.
4 Double Rivet Angle Beam (Standard Duty): This 16 gauge
4 Double
shelf beam is essential for stability of standard units; therefore, is
used on all four sides at the top and bottom levels. Can also be
used front and back or on all four sides of intermediate levels to
increase unit stability and load capacity.
Double
Double Rivet Angle Beam (Heavy Duty): An upgrade to our
standard duty double rivet angle beams, our heavy duty
double rivet angle beams provide additional unit rigidity and
even higher shelf capacity.
Rivet
Angle
5 Rivet
Channel
Center
6 Support
5 Double Rivet Channel Beam: Maximized left-to-right shelf
capacity is achieved using our 14 gauge double rivet channel
beams in lieu of double rivet angle beams. These beams cannot
be used at the bottom level.
6 Center Support: Used to provide additional shelf support
front-to-back by bolting between double rivet beams at
prepunched locations. Ideal for wider spans.
Rivet
7 Double
Z-Beam
(Standard
Duty)
Rivet
8 Double
Z-Beam
(Heavy Duty)
9 Z-Beam
Center
Support
7 Double Rivet Z-Beam (Standard Duty): For 12” thru 60” beams. Used in place of double rivet angle beams to add 1” additional
clearance between shelf levels. Allows particle board decking
to sit flush with beam. Protects decking edges. When used at
bottom level of single rivet units, shelf clearance is increased by
1” at lower level. Standard Z beams are 14 gauge.
8 Double Rivet Z-Beam (Heavy Duty): For 69” and 72” beams.
Used in place of double rivet angle beams to add 1” additional
clearance between shelf levels. Allows particle board decking to sit
flush with beam. Protects decking edges. Heavy-Duty Z beams are
14 gauge
9 Center Support for Z-Beam: Used with Z-Beams for front to
back decking support. Fabricated of 11 gauge cold rolled steel.
73
™
America’s Most Complete Locker Line®
boltless steel shelving
BY HALLOWELL®
Unit GROWTH CHART
When designing a shelving layout. Unit growth must be considered. To determine the overall dimension of
a continuous row of shelving employing T-Posts or Angle Posts with tie plates, refer to the table below.
SHELF SIZE
36" X 24"
NOMINAL
SHELF
DEPTH
+1/2"
SHELF SIZE
36" X 24"
36-1/2"
Unit Clear Width
1-1/2"
USING STD.
ANGLE POSTS
1-1/2"
1/4"
110"
36-1/2"
1/4"
1-7/8"
USING HVY.
ANGLE POSTS
1-7/8"
1-7/8"
USING HVY.
ANGLE & HVY.
T - POSTS
CLEAR
OPENING
WIDTH
CLEAR
OPENING
WIDTH
CLEAR
OPENING
WIDTH
33-1/2"
32-3/4"
32-7/8"
36-1/2"
36-1/2"
36-5/8"
SHELF WIDTH + 1/2"
MINUS 3" = CLEAR WIDTH
SHELF WIDTH + 1/2"
MINUS 3-3/4" = CLEAR WIDTH
This chart depicts shelf clearances for typical
rivetwell shelving units with 1-1/2" vertical shelf
adjustment
5 SHELF
18 - 1/2"
6 SHELF
12 - 1/2"
13 - 7/8"
18 - 3/8"
19"
10 - 7/8"
12 - 3/8"
15 - 3/8"
18 - 3/8"
7 SHELF
11"
15 - 3/8"
16"
12 - 3/8"
12 - 3/8"
13"
24 1/2"
Examples below are based on 36" wide shelf.
Vertical Shelf Clearance
for Single Rivet Units
74
36-1/2"
SHELF SIZE
36" X 24"
8 SHELF
9 - 1/2"
9 - 3/8"
9 - 3/8"
9 - 3/8"
10 - 7/8"
10 - 7/8"
11 - 1/2"
84"
1-7/8"
SHELF WIDTH + 5/8"
MINUS 3-3/4" = CLEAR WIDTH
1-7/8"
USING HVY.
T - POSTS
CLEAR
OPENING
WIDTH
33"
36-3/4"
SHELF WIDTH + 3/4"
MINUS 3-3/4" = CLEAR WIDTH
Vertical Shelf Clearance
for Double Rivet units
Units with
Standard and
Heavy Duty
Beams
1-7/8"
Units with
Channel
Beams
boltless steel shelving
America’s Most Complete Locker Line®
SINGLE RIVET UNITS - 84'' HIGH
36'' Wide Units
48'' Wide Units
(Decking not included)
(Decking not included)
Levels
Depth
Shelf
Capacity
5 Shelf
Units
12
350
SRS361284-5S
SRS361284-5A
250
SRS481284-5S
SRS481284-5A
18
350
SRS361884-5S
SRS361884-5A
250
SRS481884-5S
SRS481884-5A
24
350
SRS362484-5S
SRS362484-5A
250
SRS482484-5S
SRS482484-5A
30
350
SRS363084-5S
SRS363084-5A
250
SRS483084-5S
SRS483084-5A
36
350
SRS363684-5S
SRS363684-5A
250
SRS483684-5S
SRS483684-5A
12
350
SRS361284-6S
SRS361284-6A
250
SRS481284-6S
SRS481284-6A
18
350
SRS361884-6S
SRS361884-6A
250
SRS481884-6S
SRS481884-6A
24
350
SRS362484-6S
SRS362484-6A
250
SRS482484-6S
SRS482484-6A
30
350
SRS363084-6S
SRS363084-6A
250
SRS483084-6S
SRS483084-6A
36
350
SRS363684-6S
SRS363684-6A
250
SRS483684-6S
SRS483684-6A
12
350
SRS361284-7S
SRS361284-7A
250
SRS481284-7S
SRS481284-7A
18
350
SRS361884-7S
SRS361884-7A
250
SRS481884-7S
SRS481884-7A
24
350
SRS362484-7S
SRS362484-7A
250
SRS482484-7S
SRS482484-7A
30
350
SRS363084-7S
SRS363084-7A
250
SRS483084-7S
SRS483084-7A
36
350
SRS363684-7S
SRS363684-7A
250
SRS483684-7S
SRS483684-7A
12
350
SRS361284-8S
SRS361284-8A
250
SRS481284-8S
SRS481284-8A
18
350
SRS361884-8S
SRS361884-8A
250
SRS481884-8S
SRS481884-8A
24
350
SRS362484-8S
SRS362484-8A
250
SRS482484-8S
SRS482484-8A
30
350
SRS363084-8S
SRS363084-8A
250
SRS483084-8S
SRS483084-8A
36
350
SRS363684-8S
SRS363684-8A
250
SRS483684-8S
SRS483684-8A
6 Shelf
Units
Units
7 Shelf
Units
Unit
8 Shelf
Units
Unit
Starter
Model No.
Adder
Model No.
Shelf
Capacity
Starter
Model No.
Adder
Model No.
Starter units consist of four
standard angle posts, four left-to-right
standard double rivet angle beams,
four front-to-back standard double rivet
angle beams, two left-to-right standard
single rivet beams per intermediate
level and two front-to-back standard
single rivet beam at one
intermediate level only (30” and 36”
deep units include two front-to-back
single rivet beams at each intermediate
level).
Adder units consist of two
standard T-Posts, four left-to-right
standard double rivet angle beams,
two front-to-back standard double rivet
angle beam, two left-to-right standard
single rivet beam per intermediate level
and one front-to-back standard single
rivet beam at one intermediate level
only (30” and 36” deep units include
one front-to-back single rivet beam at
each intermediate level).
Particle Board
Decking
Size Part No.
36” X 12”
36” X 18”
HPB3612 HPB3618
36” X 24”
HPB3624
36” X 30”
HPB3630
36” X 36”
HPB3636
48” X 12”
HPB4812
48” X 18”
HPB4818
48” X 24”
HPB4824
48” X 30”
HPB4830
Be sure to order one each of
particle board decking per level.
EZ-Deck steel decking can NOT
be used on single rivet units.
Standard 5-shelf
single rivet unit
(order decking
separately)
Standard 4-shelf
double rivet unit,
see page 58.
(order decking
separately)
COLOR
SELECTION
729 Parchment
75
™
America’s Most Complete Locker Line®
boltless steel shelving
BY HALLOWELL®
DOUBLE RIVET UNITS - 84'' HIGH WITH 4 LEVELS
Without Center Support
(Decking Not Included)
Width
Beam
Type
48''
Standard
Angle Beam
48''
Heavy-Duty
Angle
60''
Heavy-Duty
Angle Beam
60''
Channel
Beam
72''
Heavy-Duty
Angle Beam
72''
Channel
Beam
96''
Heavy-Duty
Angle Beam
96''
Channel
Beam
With Center Support
(Decking Not Included)
Decking
Particle
Board
Decking
HPB4818
HPB4824
HPB4830
HPB4836
HPB4848
HPB4818
HPB4824
HPB4830
HPB4836
HPB4848
HPB6018
HPB6024
HPB6030
HPB6036
HPB6048
HPB6018
HPB6024
HPB6030
HPB6036
HPB6048
HPB7218
HPB7224
HPB7230
HPB7236
HPB7248
HPB7218
HPB7224
HPB7230
HPB7236
HPB7248
HPB9618
HPB9624
HPB9630
HPB9636
HPB9648
HPB9618
HPB9624
HPB9630
HPB9636
HPB9648
EZ-Deck
Steel
Decking
HEZD4818
HEZD4824
HEZD4830
HEZD4836
HEZD4848
HEZD4818
HEZD4824
HEZD4830
HEZD4836
HEZD4848
HEZD6018
HEZD6024
HEZD6030
HEZD6036
HEZD6048
HEZD6018
HEZD6024
HEZD6030
HEZD6036
HEZD6048
HEZD7218
HEZD7224
HEZD7230
HEZD7236
HEZD7248
HEZD7218
HEZD7224
HEZD7230
HEZD7236
HEZD7248
HEZD9618
HEZD9624
HEZD9630
HEZD9636
HEZD9648
HEZD9618
HEZD9624
HEZD9630
HEZD9636
HEZD9648
DRH7230120-5S DRH7230120-5A 1000 DRHC7230120-5S DRHC7230120-5A HPB7230
DRH7236120-5S DRH7236120-5A 1000 DRHC7236120-5S DRHC7236120-5A HPB7236
DRH7248120-5S DRH7248120-5A 1000 DRHC7248120-5S DRHC7248120-5A HPB7248
1490 DRCC7230120-5S DRCC7230120-5A HPB7230
1490 DRCC7236120-5S DRCC7236120-5A HPB7236
1490 DRCC7248120-5S DRCC7248120-5A HPB7248
620 DRHC9630120-5S DRHC9630120-5A HPB9630
620 DRHC9636120-5S DRHC9636120-5A HPB9636
620 DRHC9648120-5S DRHC9648120-5A HPB9648
1400 DRCC9630120-5S DRCC9630120-5A HPB9630
1400 DRCC9636120-5S DRCC9636120-5A HPB9636
1400 DRCC9648120-5S DRCC9648120-5A HPB9648
HEZD7230
HEZD7236
HEZD7248
HEZD7230
HEZD7236
HEZD7248
HEZD9630
HEZD9636
HEZD9648
HEZD9630
HEZD9636
HEZD9648
Depth
Shelf
Cap
Starter
Model No.
Adder
Model No.
Shelf
Cap
Starter
Model No.
Adder
Model No.
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
18
24
30
36
48
550
550
550
550
550
750
750
750
750
750
600
600
600
600
600
500
500
500
500
500
-
DRS481884-4S
DRS482484-4S
DRS483084-4S
DRS483684-4S
DRS484884-4S
DRH481884-4S
DRH482484-4S
DRH483084-4S
DRH483684-4S
DRH484884-4S
DRH601884-4S
DRH602484-4S
DRH603084-4S
DRH603684-4S
DRH604884-4S
DRH721884-4S
DRH722484-4S
DRH723084-4S
DRH723684-4S
DRH724884-4S
-
DRS481884-4A
DRS482484-4A
DRS483084-4A
DRS483684-4A
DRS484884-4A
DRH481884-4A
DRH482484-4A
DRH483084-4A
DRH483684-4A
DRH484884-4A
DRH601884-4A
DRH602484-4A
DRH603084-4A
DRH603684-4A
DRH604884-4A
DRH721884-4A
DRH722484-4A
DRH723084-4A
DRH723684-4A
DRH724884-4A
-
875
875
825
775
700
1400
1400
1310
1220
1125
1200
1200
1200
1200
1200
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
1850
1850
1850
1850
1850
620
620
620
620
620
1400
1400
1400
1400
1400
DRSC481884-4S
DRSC482484-4S
DRSC483084-4S
DRSC483684-4S
DRSC484884-4S
DRHC481884-4S
DRHC482484-4S
DRHC483084-4S
DRHC483684-4S
DRHC484884-4S
DRHC601884-4S
DRHC602484-4S
DRHC603084-4S
DRHC603684-4S
DRHC604884-4S
DRCC601884-4S
DRCC602484-4S
DRCC603084-4S
DRCC603684-4S
DRCC604884-4S
DRHC721884-4S
DRHC722484-4S
DRHC723084-4S
DRHC723684-4S
DRHC724884-4S
DRCC721884-4S
DRCC722484-4S
DRCC723084-4S
DRCC723684-4S
DRCC724884-4S
DRHC961884-4S
DRHC962484-4S
DRHC963084-4S
DRHC963684-4S
DRHC964884-4S
DRCC961884-4S
DRCC962484-4S
DRCC963084-4S
DRCC963684-4S
DRCC964884-4S
DRSC481884-4A
DRSC482484-4A
DRSC483084-4A
DRSC483684-4A
DRSC484884-4A
DRHC481884-4A
DRHC482484-4A
DRHC483084-4A
DRHC483684-4A
DRHC484884-4A
DRHC601884-4A
DRHC602484-4A
DRHC603084-4A
DRHC603684-4A
DRHC604884-4A
DRCC601884-4A
DRCC602484-4A
DRCC603084-4A
DRCC603684-4A
DRCC604884-4A
DRHC721884-4A
DRHC722484-4A
DRHC723084-4A
DRHC723684-4A
DRHC724884-4A
DRCC721884-4A
DRCC722484-4A
DRCC723084-4A
DRCC723684-4A
DRCC724884-4A
DRHC961884-4A
DRHC962484-4A
DRHC963084-4A
DRHC963684-4A
DRHC964884-4A
DRCC961884-4A
DRCC962484-4A
DRCC963084-4A
DRCC963684-4A
DRCC964884-4A
DOUBLE RIVET UNITS - 120'' HIGH WITH 5 LEVELS
72''
Heavy-Duty
Angle Beam
72''
Channel
Beam
96''
Heavy-Duty
Angle Beam
96''
Channel
Beam
30
36
48
30
36
48
30
36
48
30
36
48
500
500
500
-
Starter units consist of four standard angle posts, *two left-to-right standard double rivet angle/channel beams per level and two front-to-back
standard double rivet angle beams per level.
Adder units consist of two standard T-Posts, *two left-to-right standard double rivet angle/channel beams per level and two front-to-back
standard double rivet angle beams per level. *Channel beam units are provided with left-to-right double rivet angle beams at bottom level.
76
boltless steel shelving
America’s Most Complete Locker Line®
RECORD STORAGE UNITS
Width
Depth
Height
Levels
No. of
boxes
Starter
Model No.
Adder
Model No.
Particle
Board
Decking
EX-Deck
Steel
Decking
42''
15''
60''
3
18
RS421560-3S
RS421560-3A
HPB4215
HEZD4215
30''
60''
3
36
RS423060-3S
RS423060-3A
HPB4230
HEZD4230
15''
60''
3
30
RS691560-3S
RS691560-3A
HPB6915
HEZD6915
30''
60''
3
60
RS693060-3S
RS693060-3A
HPB6930
HEZD6930
15''
84''
4
24
RS421584-4S
RS421584-4A
HPB4215
HEZD4215
30''
84''
4
48
RS423084-4S
RS423084-4A
HPB4230
HEZD4230
15''
84''
4
40
RS691584-4S
RS691584-4A
HPB6915
HEZD6915
30''
84''
4
80
RS693084-4S
RS693084-4A
HPB6930
HEZD6930
15''
108''
5
30
RS4215108-5S
RS4215108-5A
HPB4215
HEZD4215
30''
108''
5
60
RS4230108-5S
RS4230108-5A
HPB4230
HEZD4230
15''
108''
5
50
RS6915108-5S
RS6915108-5A
HPB6915
HEZD6915
69''
42''
69''
42''
69''
Be sure to order one each of particle board or EZ-Deck steel decking per level.
The above units do not include record storage boxes.
ACCESS UNIT FROM
FRONT OR BACK!
Hallowell Record Storage Boxes are 12”w x 15”d x 10”h and are
constructed of 200# test white corrugated. Includes double thickness bottoms
and reinforced carry handles. Must be ordered in lots of 20. RECORD STORAGE BOXES
Catalog No.
Qty. Per Carton
HRSB
20
Record Storage Unit
with 4 levels
(80 Box unit)
COLOR
SELECTION
729 Parchment
77
™
America’s Most Complete Locker Line®
boltless steel shelving
BY HALLOWELL®
TIRE STORAGE RACKS
Width
Depth
Height
Levels
*Tire
Capacity
Starter
Model No.
9”
Adder
Model No.
12”
SINGLE ROW
60''
21''
84''
3
24
TSS602184-3S
TSS602184-3A
21''
120''
4
32
TSS6021120-4S
TSS6021120-4A
21''
144''
5
40
TSS6021144-5S
TSS6021144-5A
21''
192''
6
48
TSS6021192-6S** TSS6021192-6A**
DOUBLE ROW
60''
21''
84''
3
48
TSD602184-3S
TSD602184-3A
21''
120''
4
64
TSD6021120-4S
TSD6021120-4A
21''
144''
5
80
TSD6021144-5S
TSD6021144-5A
21''
192''
6
96
TSD6021192-6S** TSD6021192-6A**
(*)Based on average passenger tire (**) Supplied with heavy-duty posts
NOTE: 144” high units are supplied with two 6’ posts spliced to achieve 12’ height. 192” high units
are supplied with two 8’ posts spliced to achieve 16’ height. For additional configurations, please
contact our inside sales department.
MUFFLER STORAGE UNITS
Tire Storage Rack
Particle Board
Decking
Adder
Model No.
MS483684-5A
Size
Part No.
5
Starter
Model No.
MS483684-5S
48'' X 36''
HPB4836
5
MS963684-5S
MS963684-5A
96'' X 36''
HPB9636
Width
Depth
Height
Levels
48''
36''
84''
96''
36''
84''
Be sure to order one each of particle board decking per level.
HANGING TAILPIPE RACK
Width
Depth
Height
Starter
Model No.
48''
18''
120''
HTP4818120
96''
18''
120''
HTP9618120
Hanging Tailpipe Rack
78
COLOR
SELECTION
729
Parchment (PT)
Tire Rack
Muffler Storage Rack
boltless steel shelving
America’s Most Complete Locker Line®
PARTICLE BOARD & E-Z DECK CAPACITY RATINGS
Recommended safe use load table for 5/8” particle board and EZ-Deck steel decking allowable uniformly distributed static live loads for deck material
Size
(inches)
WxD
36x12
36x18
36x24
36x30
36x36
42x12
42x18
42x24
42x30
42x36
48x12
48x18
48x24
48x30
48x36
48x48
60x18
60x24
60x30
60x36
60x48
69x15
69x30
72x18
72x24
72x30
72x36
72x48
84x24
84x30
84x36
84x48
96x18
96x24
96x30
96x36
Particle
Board
Decking
HPB3612
HPB3618
HPB3624
HPB3630
HPB3636
HPB4212
HPB4218
HPB4224
HPB4230
HPB4236
HPB4812
HPB4818
HPB4824
HPB4830
HPB4836
HPB4848
HPB6018
HPB6024
HPB6030
HPB6036
HPB6048
HPB6915
HPB6930
HPB7218
HPB7224
HPB7230
HPB7236
HPB7248
HPB8424
HPB8430
HPB8436
HPB8448
HPB9618
HPB9624
HPB9630
HPB9636
EX-Deck
Steel
Decking
HEZD3612
HEZD3618
HEZD3624
HEZD3630
HEZD3636
HEZD4212
HEZD4218
HEZD4224
HEZD4230
HEZD4236
HEZD4812
HEZD4818
HEZD4824
HEZD4830
HEZD4836
HEZD4848
HEZD6018
HEZD6024
HEZD6030
HEZD6036
HEZD6048
HEZD6915
HEZD6930
HEZD7218
HEZD7224
HEZD7230
HEZD7236
HEZD7248
HEZD8424
HEZD8430
HEZD8436
HEZD8448
HEZD9618
HEZD9624
HEZD9630
HEZD9636
2 Sides Supported
4 Sides Supported
4 Sides + Center Supported 4 Sides + 2 Center Supported
LOAD
(lbs.)
DEFL
(ins)
LOAD
(lbs.)
DEFL
(ins)
LOAD
(lbs.)
DEFL
(ins)
LOAD
(lbs.)
DEFL
(ins)
425
400
305
250
150
490
460
355
300
175
560
525
405
325
200
85
660
505
410
250
105
900
470
800
605
500
300
130
705
570
355
150
1050
810
655
405
0.06
0.17
0.30
0.47
0.50
0.06
0.17
0.30
0.47
0.50
0.06
0.17
0.30
0.47
0.50
0.50
0.17
0.30
0.47
0.50
0.50
0.11
0.50
0.17
0.30
0.47
0.50
0.50
0.30
0.47
0.50
0.50
0.17
0.30
0.47
0.50
675
550
435
385
180
755
600
500
410
385
850
635
530
440
400
275
735
615
520
380
230
950
600
850
680
610
390
215
765
650
415
215
1115
850
710
450
0.08
0.18
0.23
0.32
0.39
0.08
0.18
0.29
0.36
0.45
0.08
0.18
0.30
0.40
0.50
0.50
0.18
0.32
0.46
0.50
0.50
0.12
0.50
0.17
0.31
0.50
0.50
0.50
0.31
0.49
0.50
0.50
0.17
0.31
0.49
0.50
1160
770
700
705
755
920
835
700
650
665
750
1150
670
1000
770
680
655
685
870
735
670
660
1300
1000
800
710
0.08
0.10
0.11
0.12
0.12
0.13
0.12
0.15
0.16
0.17
0.18
0.12
0.20
0.15
0.19
0.21
0.23
0.25
0.23
0.27
0.29
0.33
0.18
0.26
0.32
0.36
1140
1180
1324
1520
2000
1250
1220
1200
1135
1200
1325
1670
1150
1150
1210
1460
1500
1200
1180
1150
0.08
0.10
0.11
0.12
0.14
0.11
0.13
0.10
0.12
0.14
0.16
0.18
0.15
0.18
0.20
0.23
0.15
0.18
0.20
0.24
NOTE: The above load chart refers to the deck materials only. Particle board decking is 5/8” industrial grade type 1-M-2.
EZ-Deck steel decking is 22 gauge galvanized sheet steel fabricated in 6” deep channel planks (models listed above include multiple planks to
meet unit depth). 15” deep Ez-Deck will be shipped in two (2) 7 1/2” deep planks. The allowable shelf load capacity may be reduced due to
allowable post and / or beam capacities. Specific deflection limits may also reduce the shelf load capacity.
NOTE: EZ-Deck must be center supported on units 48” wide and wider. EZ-Deck steel decking can NOT be used on single rivet units.
Multiple 6"
EZ-Deck
Steel
Decking
Particle
Board
Decking
Unit
Depth
Unit
width
Unit
Depth
deep planks
form each level
Two 7-1/2"
planks will be
supplied on
15" deep units
Unit
width
79
COLOR
SELECTION
PLATED
FINISH
America’s Most Complete Locker Line®
superior portable gates
THE PERFECT traffic containment SOLUTION
®
Security • Traffic Control • Portability
•
•
•
•
•
•
•
•
•
In Stock for shipment within 5 days of receipt of order
Quick and easy installation. Install between two walls instantly without anchors to walls or floor
Simplified, patented pressure lock system
Floor anchors are not required but are available for special installations
Compact, fold-up size and heavy duty swivel casters make moving and storage easy
Plated finish
Padlock hasp is standard
Cylinder locks are available for additional security
Two or more gates can be joined together for large expanse
How the exclusive Superior® Pressure Lock System works:
1. Raise unit retainer channel to vertical position and secure
2.Extend gate until rubber bumpers touch both walls
3.Lower the male lock channel (with pin) until it rests on carriage channels within guides and locking bracket.
4.Lower female lock channel (with adjustment holes) until it rests within the male lock channel with pin.
Pin need not engage a hole in female lock channel.
5.Raise both channels until pin engages the hole immediately to the right. Applying moderate pressure, push
both channels down until they rest within guides and locking bracket. Lock in position.
Superior® Portable
Gates are ideal for:
Schools
Shopping Malls
Recreation Centers
Factories
Libraries
Hospitals
Office Buildings
Financial Institutions
Theaters
Museums
Five sizes to accommodate 3’-6” wide to 18’-0” wide conditions.
Connect multiple gates together for wider applications.
Model
80
P601-06
P601-09
P601-12
P601-15
P601-18
PG-CL
PG-FAA
PG-A
For Openings Collapsed Size
3'-6'' to 6'-0''
6'-0'' to 9'-0''
7'-0'' to 12'-0''
11'-0'' to 15'-0''
13'-0'' to 18'-0''
Cylindor Locks
Floor Anchors
Additional Anchors
Height
19'' x 30''6'-6-1/2''
19'' x 30''6'-6-1/2''
24'' x 30''6'-6-1/2''
30'' x 30''6'-6-1/2''
30'' x 30''6'-6-1/2''
Weight (lbs)
193
197
254
311
374
FUNCTIONAL, DURABLE
HEAVY-GUAGE CABINETS
America’s Most Complete Locker Line®
Gives maximum protection to tools, dies, delicate
instruments, supplies, and personal belongings.
Neat and attractive in appearance. Designed to meet
government requirements.
hallowell®
HEAVY-GAUGE
KD CABINETS
Features:
• Cabinet is fabricated from heavy
gauge steel for appearance and
durability.
• All metal parts are precision
engineered. No bolt heads show in
front or on side panels.
• Positive three-point locking (top,
center and bottom) and theft
resistant hinges for security.
• Chrome-plated locking handle has
built-in grooved key cylinder lock.
• Shelves easily adjust up or down
in 2” increments. Triple flanged
front for added strength (300 lb.
capacity).
• Doors swing out quietly a full 180°
and are “HAT” section reinforced.
• Corner Foot Gussets provide
added rigidity and stability
All-welded door frame assembly assures even closure all
the way around. Doors are factor y assembled in frame to
insure accurate fit.
STORAGE Model 815
WARDROBE Model 835
COMBINATION Model 855
Storage
Cabinet Kit
Width Depth Height Knock-Down Fully-Assembled
Color
Cat. No.
Cat No.
Selection
Storage Cabinets
36
18
78
815-S-18
815-S-18A
PT
36
24
78
815-S-24
815-S-24A
PT
Wardrobe Cabinets
36
18
78
835-W-18
835-W-18A
PT
36
24
78
835-W-24
835-W-24A
PT
Combination Cabinets
36
18
78
855-C-18
855-C-18A
PT
36
24
78
855-C-24
855-C-24A
PT
Storage Cabinet Conversion Kit 36
36
18 S-3618
-------
PT
36
24
S-3624
-------
PT
Wardrobe Cabinet Conversion Kit l
36
W-36
Combination Cabinet Conversion Kit l
36
18
C-3618
36
24
C-3624
(Combination Cabinet Conversion Kit includes 1 center partition and 3 half width shelves,
1 half width coat rod) Includes
full-height door
stiffener. Doors
swing a full 180º
18
Combination
Cabinet Kit
Wardrobe Cabinet Kit
COLOR
SELECTION
729
Parchment (PT)
81
bulk storage lockers
America’s Most Complete Locker Line®
superior® bulk storage lockers
Superior® Bulk Storage Lockers are
the ideal solution for condos and any
facility that requires additional secure
storage.
•
•
•
•
Single & double tier models
Economical • Secure • Durable
Fast & Easy Installation
Low life-cycle cost • Attractive
Superior® all steel bulk storage lockers have
been designed to provide maximum security
and durability. Cost effective and ease of
installation make them the perfect choice. The
use of Hallowell manufactured lockers creates
an esthetically appealing installation that when
properly promoted can be a tremendous asset
to the building and of great value to the users.
Shown with
optional expanded
metal top
13” transom
Heavy-duty 13 gauge
7-knuckle 3-1/2”
butt hinges
Welded door brace
for added rigidity
Welded padlock
hasp and ergonomic
welded-on door pull
1/2” 16 gauge
flattened expanded
metal doors and sides
Tops are recommended for situations
where the ceiling height is 8’-6" or more
when using standard 7’-6" high
component modules.
Shelves are used as dividers between
top and bottom openings of double tier
lockers. May also be used in single tier
lockers for additional floor space and
may be shorter than depth of locker to
provide space for long items.
sINGLE tIER starter unit
Custom Installations
Hallowell Storage Lockers’ unique construction
provides for a simple, easy way of handling
interference from overhead pipes and/or ducts.
Backs are required for back-to-back
installations or where a single row is set
away from a wall.
Repair Angle 16 gauge 36" long repair angle is pre-punched
on 2" centers to "heal" cuts in dividers or transom. Two bolts
and clips are included with each angle.
Bottoms are recommended for use on
all single or double tier lockers if
dampness prevails.
Storage Locker Stock Sizes
Standard Sizes available in single
COLOR
SELECTION
736
SPORT SILVER
(SS)
and double tier configurations
Width
Depths
Height
Heavy-gauge vertical
frame channels and
horizontal frame
angles
3'-0'' 4'-0''
3'-0'' 4'-0''
7'-6''
5'-0''
Front Extension Panels are available in 6” wide
increments from 6” wide to 48” wide to create
oversized width units.
Repair
Angles
Showing cut out (with repair angles) to allow
for interfering duct.
View of pipe through
transom (or divider) with
repair angle.
Custom sizes are also available. Contact our Sales and Marketing Department at 1-866-776-1342 for availability.
82
Note: In the interest of safety, all List lockers must be securely anchored to the floor and/or wall.
bulk storage lockers
America’s Most Complete Locker Line®
Serving the storage needs of thousands of residential, commercial and
institutional buildings throughout the U.S.A. for more than 70 years!
Starter Units
The Heavy-Duty
7 knuckle hinges and
door stops are welded
to the frame for extra
strength and security
of contents, imparting
a more finished and
attractive appearance
to the unit.
Adder Units
Sport Silver
Sport Silver
Part No.
Part No.
Single Tier 36 36 90
BSL363690-1S-SS BSL363690-1A-SS
36 48 90
BSL364890-1S-SS BSL364890-1A-SS
36 60 90
BSL366090-1S-SS BSL366090-1A-SS
48 36 90
BSL483690-1S-SS BSL483690-1A-SS
48 48 90
BSL484890-1S-SS BSL484890-1A-SS
48 60 90
BSL486090-1S-SS BSL486090-1A-SS
Double Tier 36 36 45
BSL363690-2S-SS BSL363690-2A-SS
36 48 45
BSL364890-2S-SS BSL364890-2A-SS
36 60 45
BSL366090-2S-SS BSL366090-2A-SS
48 36 45
BSL483690-2S-SS BSL483690-2A-SS
48 48 45
BSL484890-2S-SS BSL484890-2A-SS
48 60 45
BSL486090-2S-SS BSL486090-2A-SS
Accessories for Bulk Storage lockers
Top Panels
36 36
4803636SS
36 48
4803648SS
•
Units
available
right
or 36 60
4803660SS
left-hand hinged 48 36
4804836SS
• Single Tier:
48 48
4804848SS
• Overall Height 90”
48 60
4804860SS
W
D
H
Front Extension Panels
6
12
18
24
90
90
90
90
4600690SS
4601290SS
4601890SS
4602490SS
back panels
36
48
90
90
4703690SS
4704890SS
repair angles
Optional 16 gauge
1/2” expanded metal
top makes for a very
secure structure
adding rigidity and
ensuring a higher
level of protection
from theft.
• Double Tier:
Door handles are
formed from one
solid piece of steel
and are welded to
the frame for extra
strength.
• Overall Height 90” • Upper Opening Height:
31-1/2”
• Lower Opening Height: 42”
• Opening Height: 75-1/2”
Custom sizes are
also available.
Contact our Sales and
Marketing Department for
more information.
36
20100
bulk storage lockers
Sp
e SPECIFICATIONS
ci
f
ica
t
i
o
n
s
General: Lockers shall be
Bulk Storage Lockers with all
welded components as manufactured by List Industries Inc., 2823 West
Orange Ave., Apopka, FL 32708, www.Hallowell-List.com. Quantities, sizes and
arrangements shall be as shown on drawings.
Shelves: Where required, shall be of 22 gauge galvanized sheet steel with
double bends at front and back. Provided as standard for all double tier lockers
to separate upper tier from lower tier. Provided in multiple 12” (nominal) deep
planks to meet locker depth. Galvanized shelves ship unpainted.
Locker Fronts: All doors, whether single or double tier, shall consist of 1/2”
16 gauge flattened expanded metal framed by 1-1/4” x 1-1/4” 12 gauge formed
angles. Single tier doors shall have an angle reinforcement across center. Doors
shall be pre-hung in frames at the factory, with all hinges, padlock hasps and
door strikes securely welded in position. Door frames shall be fabricated from
1-1/2” x 1” 14 gauge formed channels on the sides and 1-1/2” x 1” 14 gauge
formed angles at top and bottom. All frames shall be pre-punched for ease of
installation. All front assemblies are 1-1/2” deep and shall include a 13” high
upper transom above door.
Backs: Optional, shall be of 1/2” 16 gauge flattened expanded metal
frameless design. Required at back-to-back conditions or where locker backs
are away from walls.
Superior®
Vertical Dividers: Shall be 1/2” 16 gauge flattened expanded metal securely
welded to 1-1/8” x 1-1/8” 14 gauge formed angles. Shelf support channels shall
be fabricated of 14 gauge steel and be welded to vertical dividers (sides) on
inside and outside of intermediate double tier dividers and on inside only of
double tier row end dividers as well as on inside of all single tier dividers. All
vertical dividers are 1-1/2” less than nominal locker depth to allow for 1-1/2”
deep door front assembly.
Repair Angles: 16 gauge 36” long repair angle is pre-punched on 2”
centers to “heal” cuts in dividers or transom. Two bolts and clips are included
with each angle.
Bottoms (optional): Where required, shall be of 22 gauge galvanized sheet
steel with double bend at front and back. Galvanized bottoms ship unpainted.
Tops (optional): Shall be of 1/2” 16 gauge flattened expanded metal
with a 16 gauge angle welded at rear. Include mounting clips and bolts.
Recommended where ceiling height is 12” or more above locker height.
Finish: All fronts, vertical dividers, backs and tops shall include powder coat
finish in #736 Sport Silver. Shelves and/or bottoms shall be galvanized sheet
steel, unpainted.
Installation: Vertical dividers and door frames shall be securely anchored
to wall and/or floor with an anchoring system selected by the installer. All door
frames, tops and backs shall be fastened together using 1/4” x 3/4” cadmium
plated bolts and nuts, to be provided by installer.
83
stock
America’s Most Complete Locker
program
Line®
Our National QUICK-SHIP
Program is the largest
of it’s kind in the locker
industry.
QUICK-SHIP Lockers are available in 20 different styles comprised of more than
Our four distribution centers are strategically located to
allow for localized distribution. All List distribution
centers are company owned and operated to insure
your orders are properly prioritized and that all
operations are per our company philosophy.
QUICK-SHIP Bulk Storage Lockers are available in single and
Our unparalleled array of products and services assures
that your order will ship fast and secure while saving
you time and money on shipping costs. Logistics,
service and product offering is what positions
List Industries Inc. at the forefront of the industry.
QUICK-SHIP Shelving is available in open and closed clip type shelving, our
All In-Stock
Products
5
Ship in
Business
Days!
1,200 SKUs which allows you the benefit of selecting a locker to meet your specific storage needs. A
complete line of locker accessories is available from stock to help you complete your locker system.
Order your lockers to ship fully-assembled to take full advantage of our expertise. Your lockers will be
packaged above industry standards to insure a safe arrival. When shipping prepaid, all assembled
lockers ship class 70, the same economical freight class as knock-down lockers.
double tier models. Superior Bulk Storage Lockers have been upgraded to include stronger/safer
mesh while the finish has been upgraded to a durable, attractive silver powder coat finish. Bulk storage
lockers are perfect for multi-family condominium residential storage and for
warehouse facilities.
unique pass-thru shelving and rivet-type boltless shelving with choice of particle board or steel decking.
With shelf load capacities ranging up to 2,000 pounds, you can be sure that Hallowell stocks a shelving
system to meet your specific storage requirements.
QUICK-SHIP Cabinets are available in both our 800 Series and our industry best
DuraTough All-Welded Series. Our 800 Series cabinets are perfect for standard industrial
applications and can be ordered knock-down or fully-assembled. DuraTough All-Welded Series
cabinets provide heavy and extra heavy-duty storage in both conventional and corrosion resistant
versions and can be ordered with or without 4” high legs. Cabinets are stocked in wardrobe, storage
and combination styles.
QUICK-SHIP Portable Gates are available in 5 standard sizes and can
be connected end-to-end for wider expanse. Portable Gates provide security and/or traffic control in
a compact portable design. Our industry exclusive pressure lock system instantly installs between two
walls without the need for anchoring. Our unique design maintains the gate’s height throughout the
expanding and collapsing of the gate.
REGIONAL
DISTRIBUTION
CENTER
MECHANICSBURG, PA
REGIONAL
DISTRIBUTION
CENTER
MEMPHIS, TN
NATIONAL
DISTRIBUTION
CENTER
APOPKA, FL
REGIONAL
DISTRIBUTION
CENTER
REDLANDS, CA
84
REGIONAL
DISTRIBUTION
CENTER
BELTON, TX
(Coming soon)
MANUFACTURING
HEADQUARTERS
DEERFIELD BEACH, FL
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
Your Quick-Ship Order in Motion.
1
2
1. When your purchase order is
received, it is immediately processed.
Once in our system, an audit is
performed to insure accurate data
entry. Your order is then released to
the appropriate distribution center.
3. Lockers and cabinets
are assembled by skilled
professionals who insure
proper fit and
function before
forwarding for packing.
4
2. The distribution center
sends the work-order to
the warehouse floor where
the products are pulled
from inventory. The picked
order is then forwarded to
the assembly department
if applicable or directly to
packaging.
3
4. Once in packaging,
the product is again
audited for accuracy
and inspected for
quality. All products
are packaged in
specially designed
cartons and custom
spacers are used in
critical areas to insure
that the product is
adequately protected
during shipment. The
order is then forwarded
to Shipping.
5. Shipping audits the
order to insure that it
is complete and
accurate. Once your
order is ready for
shipment, a carrier
is carefully selected
according to customer
preference, point of
destination, carrier
performance history
and shipping cost.
Your order is then
loaded and you are
sent a shipping notice
allowing you to track
your order.
5
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
85
stock
America’s Most Complete Locker
program
Line®
Classic wardrobe lockers are traditional louvered door lockers
designed for storage of all personal belongings
Features:
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single, double and triple tier
DOOR: 16 gauge, louvered for added ventilation
HINGES: Continuous piano type
HANDLE: Stainless steel recessed handle with multi-point gravity
lift-type latching for a modern look and added safety. Recessed
handle protects finish from being marred by padlock.
HOOKS: One double prong ceiling hook and two single hooks per
single and double tier opening. One double ceiling hook per triple
tier opening.
COAT RODS: Available for single tier at a nominal cost
SHELVES: Hat shelf is included in single tier lockers.
LEGS: 6” high legs are standard. Lockers without legs at a nominal
charge
COLOR
SELECTION
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
Triple Tier,
1 wide,
3 openings
Triple Tier,
1 wide,
3 openings
Triple Tier,
1 wide,
3 openings
Note: Parchment, Hallowell Gray and Marine Blue lockers include matching body colors. Maroon
and Green Mist lockers include Parchment body and sides. Some sizes and models are available in
WARDROBE AND BOX LOCKERS limited colors. For current color availability visit: www.ListIndustries.com.
727
705
725
707
729
MAROON (MN)
Green Mist (GM)
PARCHMENT (PT) Hallowell Gray (HG) Marine Blue (MB)
PARCHMENT BODY PARCHMENT BODY
Classic KD box lockers include louvered doors and are perfect for
small personal storage
Features:
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Five and six tier, 16 Person
and wall mount
DOOR: 18 gauge, Louvered for added ventilation
HINGES: Continuous piano type
HANDLE: Single-point projecting friction catch door
pull prepared for both padlock or built-in lock.
No moving parts insures quiet maintenance-free
operation.
HOOKS: None COAT RODS: None SHELVES: None
LEGS: 6” high legs are standard. Lockers without
legs at a
nominal
charge
Five Tier,
FiveTier,
1 wide,
1 wide,
5 openings 5 openings
Six Tier,
1 wide,
6 openings
Six Tier,
1 wide,
6 openings
Six Tier,
1 wide,
6 openings
Single-point thru-the-door
friction catch door pull
designed for use with a
padlock or built-in lock.
Shown with optional strike
plate which protects door
from being marred by padlock
86
Six Tier,
1 wide,
6 openings
Six Tier,
1 wide,
6 openings
4-Wide Wall
Mount Lockers
Sixteen-Person
Lockers
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
Maintenance-Free Quiet™ KD lockers are the perfect choice when
reducing noise is essential, yet durability and affordability are important.
Features:
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single, double and triple tier
DOOR: 16 gauge, solid with 18 gauge welded-on door stiffener
HINGES: Continuous piano type
HANDLE: Deep drawn stainless steel recessed handle with
single-point latching. Recessed handle protects finish from
being marred by padlock.
HOOKS: One double prong ceiling hook and two single hooks
per single and double tier opening. One double ceiling hook
per triple tier opening.
COAT RODS: Available for single tier at a nominal cost
SHELVES: Hat shelf is included in single tier lockers.
LEGS: 6” high legs are standard.
Lockers without legs at a nominal charge
COLOR
SELECTION
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
Triple Tier,
1 wide,
3 openings
729
Parchment (PT)
725
Hallowell Gray (HG)
Deep-drawn
stainless
steel
recessed
handle with
single-point
latching
Maintenance-Free
Quiet Lockers
include a 3" wide 18
gauge full height door
stiffener spot welded
to the inner door face
and MIG welded to the
hinge side as well as to
the top and bottom door
flanges providing a rigid
torque-free door.
Features:
Electronic Access Lockers
Locks arrive in
Day-Use mode for
shared use and can
be programmed
for permanent
use by management.
COLOR
SELECTION
729
Parchment (PT)
Single Tier,
1 wide,
1 opening
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single, double, triple and six tier
DOOR: 16 gauge, louvered type, 18 gauge for box doors
HINGES: Continuous piano type
HANDLE: User programmable electronic lock/handle
HOOKS: One double prong ceiling hook and two single
hooks per single and double tier opening. One double
ceiling hook per triple tier opening. No hooks
for box lockers
COAT RODS: Available for single tier at a
nominal cost
SHELVES: Hat shelf is included in single tier
lockers.
LEGS: 6” high legs are standard. Lockers without
legs at a nominal charge
Double Tier,
1 wide,
2 openings
Six Tier,
1 wide,
6 openings
Six Tier,
3 wide,
18 openings
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
87
stock
America’s Most Complete Locker
program
Line®
™
Emergency Response
All-welded Extreme
Performance Lockers
Features:
BODY CONSTRUCTION: 16 gauge,
Unibody all-welded, galvannealed corrosion
resistant sheet steel. Back is 18 gauge
BODY STYLES: Single tier, custom designed
for specialized use
DOOR: 14 gauge louvered double doors with full-height
welded in stiffener
HINGES: Continuous piano type
HANDLE: 3 point turn handle latching
HOOKS: Two single wall hooks in wardrobe area, single hook
at opening below security box and on door.
COAT RODS: One at vertical wardrobe section
COLOR
SHELVES: Two full-width at top, one shelf
SELECTION
over security box
SIZE: Wardrobe locker 24” x 24” x 72”
725
Hallowell Gray (HG)
Optional base/drawer unit 24” x 36” x 18”
Available with and
without storage
compartment and seat
Galvanite™ Corrosion Resistant KD Lockers
Galvanite lockers are fabricated from prime galvanneal (hot-dipped zinc
coated, annealed) sheet steel , then finished with an electrostatically
applied high grade powder coat finish providing double protection
against corrosion.
Features:
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
88
Triple Tier,
3 wide,
9 openings
Six Tier,
3 wide,
18 openings
BODY CONSTRUCTION: Knock-down, 24 gauge, galvannealed
corrosion resistant sheet steel
BODY STYLES: Single, double and triple tier for wardrobe
lockers and six tier for box lockers
DOOR: 16 gauge, 18 gauge for box doors, galvannealed
corrosion resistant sheet steel, louvered
HINGES: Continuous piano type
HANDLE (wardrobe): Stainless steel recessed handle with
multi-point gravity lift-type latching. Recessed handle
protects finish from being marred by padlock.
HANDLE (box): Box lockers include a projecting single-point
friction catch door pull prepared for both padlock or built-in
lock. No moving parts insures quiet maintenance-free
operation.
HOOKS: One double prong ceiling hook and two single
hooks per single and double tier opening. One double
ceiling hook for triple tier.
COLOR
COAT RODS: Available for single tier at a
SELECTION
nominal cost
SHELVES: Hat shelf is included in single
729
tier lockers.
Parchment (PT)
LEGS: 6” high legs are standard. Lockers
without legs are available at a nominal charge.
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
INCLUDE:
• Assembly
• Padlocks
• Padlock Strike plates
ready-built Features:
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
Triple Tier,
1 wide,
3 openings
Six Tier,
1 wide,
6 openings
BODY CONSTRUCTION: Knock-down, 24 gauge
sheet steel
BODY STYLES: Single, double, triple and six tier
DOOR: 16 gauge, 18 gauge for box doors,
louvered for added ventilation,
Locks Included in HINGES: Continuous piano type
Stainless Steel
HANDLE (wardrobe): Stainless steel recessed handle with
Recessed Handles multi-point gravity lift-type latching. Recessed handle protects
for Wardrobe
finish from being marred by padlock.
Lockers
HANDLE (box): Box lockers include a projecting single-point
friction catch door pull prepared for padlock or built-in lock.
No moving parts insures quiet maintenance-free operation.
HOOKS: One double prong ceiling hook and two single
hooks per single and double tier opening. One double ceiling
hook per triple tier opening. No hooks for box lockers
COAT RODS: Available for single tier at a nominal cost
Locks and Padlock SHELVES: Hat shelf is included in single tier lockers.
Strike Plates
LEGS: 6” high legs are standard. Lockers without legs at a
Included
nominal charge
for Box Lockers
INCLUDE:
• Assembly
• Padlocks
• Padlock Strike Plates
• Slope Tops
• Closed Base
Slope Tops
Prevent items from being
placed or stored on locker
tops.
Padlocks
3-number combinations
provide for maximum security.
Strike Plates
Aluminum plates are riveted to
door to prevent padlocks from
marring painted door finish on
six tier
COLOR
SELECTION
729
PARCHMENT (PT)
725
Hallowell Gray
(HG)
707
MARINE BLUE (MB)
Closed Metal Base
Front and side bases close off
area below lockers at 6” legs to
prevent collection of debris.
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
Triple Tier,
1 wide,
3 openings
Six Tier,
1 wide,
6 openings
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
89
stock
America’s Most Complete Locker
program
Line®
Specially formulated powder coat
finish protects against bacteria, mold,
yeast & mildew for up to 20 years!
™
Features:
COLOR
SELECTION
Platinum (PL)
Single Tier,
1 wide,
1 opening
Double Tier,
1 wide,
2 openings
Double Tier,
3 wide,
6 openings
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single and double tier
custom FEATURES: Antimicrobial finish
DOOR: 16 gauge, louvered for added ventilation
HINGES: Continuous piano type
HANDLE: Stainless steel recessed handle with multi-point gravity
lift-type latching. Recessed handle protects finish from being
marred by padlock.
HOOKS: One double prong ceiling hook and two single hooks per
single and double tier opening. One double ceiling
hook for triple tier.
COAT RODS: Available for single tier at a nominal cost
SHELVES: Hat shelf is included in single tier lockers.
LEGS: 6” high legs are standard. Lockers without legs are
available at a nominal charge.
COLOR
SELECTION
729
Parchment (PT)
90
Features:
Features:
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single, double and triple tier
door: 16 gauge with two, high strength molded
polycarbonate panels per door for easy content viewing
HINGES: Continuous piano type
HANDLE: Stainless steel recessed handle with multi-point
gravity lift-type latching. Recessed handle protects finish
from being marred by padlock.
HOOKS: One double prong ceiling
hook and two single hooks per
single and double tier opening.
One double ceiling hook for triple
tier opening.
COAT RODS: Available for single
tier at a nominal cost
SHELVES: Hat shelf is included in
single tier lockers.
LEGS: 6” high legs are standard.
Lockers without legs are
available at a nominal charge.
notes: Meets UL flammability
standards, Polycarbonate is
approved by the Consumer
Product Safety Commission
(CPSC16CFR 1201)
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Six tier, Sixteen Person and wall mount
doors: High strength injection molded
polycarbonate doors for unobstructed content viewing
HINGES: Continuous piano type
HANDLE: Single-point projecting friction catch door pull
prepared for both padlock or built-in lock.
HOOKS: None
COAT RODS: Standard on Sixteen person
SHELVES: None
LEGS: 6” high legs are standard. Lockers without legs
are available for a nominal charge.
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
These lockers represent an
exceptional value, in quality
and finish at an affordable price.
Features:
BODY CONSTRUCTION: Knock-down, 24 gauge
BODY STYLES: Single, double and triple tier
DOOR: 16 gauge, louvered for added ventilation
HINGES: Continuous piano type
HANDLE: Single-point thru-the-door friction catch door
pull designed for use with a padlock or built-in lock
HOOKS: One double ceiling hook for all lockers.
COAT RODS: Available for single
tier at a nominal cost
COLOR
SELECTION
SHELVES: Hat shelf is included
in single tier lockers.
725
LEGS: 6” high legs are standard.
Hallowell Gray (HG)
Lockers without legs are
available at a nominal charge.
729
PARCHMENT (PT)
Heavy-Duty Ventilated (HDV) KD Stock Lockers
Heavy-Duty Ventilated (HDV) KD stock lockers are
the perfect choice when a first-class athletic
ventilated locker is the answer to your locker needs.
Features:
COLOR
SELECTION
725
729
Parchment (PT) Hallowell Gray (HG)
BODY CONSTRUCTION: Knock-down, 16 gauge body,
diamond perforated sides, 18 gauge back
BODY STYLES: Single, double, triple and six tier
DOOR: 14 gauge, diamond perforated for maximum
ventilation
HINGES: Continuous piano type
HANDLE (wardrobe): Stainless steel recessed
handle with multi-point gravity lift-type latching.
Recessed handle protects finish from being
marred by padlock.
HANDLE (box): Box lockers include a projecting
single-point friction catch door pull prepared for
both padlock or built-in lock. No moving parts
insures quiet maintenance-free operation.
HOOKS: One double prong hook and two
single wall hooks for single and double tier
openings. One double ceiling hook for triple tier
opening. No hooks for box lockers
COAT RODS: Available for single tier at a nominal
cost
SHELVES: Hat shelf is included in single tier
lockers.
LEGS: 6” high legs are standard. Lockers without
legs are available at a nominal charge.
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
91
stock
America’s Most Complete Locker
program
Line®
™
Solid Plastic Lockers
Features:
BODY CONSTRUCTION: Corrosion Proof High Density Polyethylene
(HDPE), 1/2” thick frame with 3/8” thick body panels
BODY STYLES: Single, double and triple tier
DOOR (wardrobe & box): Horizontal slots in door face provide
ample ventilation.
HINGES: Continuous aluminum hinge is powder coated
HANDLE (wardrobe): Projecting solid plastic handle with continuous
full-height lift-type latching
HANDLE (box): Doors 18" and under include a single-point
projecting friction catch door pull with padlock hasp
SHELVES: Hat shelf is included in single tier lockers 60" and 72" high
hookS: One double ceiling hook is included in single and double
tier lockers
Solid Plastic (HDPE) Food Industry Lockers
Single Tier, 3 wide,
3 openings
Double Tier, 3 wide,
6 openings shown
with optional 6” base
COLOR
SELECTION
Glacier Gray
OR
Six Tier, 1 wide,
6 openings
Blue
Glacier
Gray Body Doors
Features:
BODY CONSTRUCTION: Corrosion
Proof High Density Polyethylene
(HDPE), 1/2” thick frame with
3/8” thick body panels
BODY STYLES: Single tier
DOOR: Transparent blue ventilated
polycarbonate doors for viewing contents
HINGES: Continuous aluminum hinge
is powder coated
HANDLE: Projecting solid plastic
handle with continuous full-height
lift-type latching
SHELVES: Hat shelf is included in
single tier lockers 60" and 72" high
hookS: One double ceiling hook is
included
in single and double tier
legs: 16” legs/base are standard
Solid Plastic (HDPE) Rust
Proof Modular Lockers
Each locker is a single unit
that can be attached
side-by-side or stacked to
form a row or column of
lockers to fit virtually any
locker environment.
COLOR
SELECTION
Glacier Gray
OR
Blue
Glacier
Gray Body Doors
COLOR
SELECTION
Glacier Gray
(GG)
92
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
Corrosion Resistant
All-Welded Lockers
Features:
BODY CONSTRUCTION: All-welded heavy-duty tubular frame
construction, galvanneal sheet steel for added corrosion
resistance, side and back are 1/2” 13 gauge flattened expanded
metal, top and bottom are heavy-duty 16 gauge galvanneal
corrosion resistant sheet steel
BODY STYLES: Single tier
DOOR: 14 gauge galvanneal sheet steel door is diamond perforated
for added visibility and ventilation. Includes a welded-in full height
door stiffener
HINGES: Super-duty 13 gauge 7-knuckle (3-per door)
HANDLE Single-point projecting friction catch door pull prepared for
both padlock or built-in lock.
SHELVES: Four 16 gauge welded-in fixed shelves provide ample
storage space and add additional rigidity to the unit
All-Welded MaxView
lockers are perfect
for tool and
equipment storage.
COLOR
SELECTION
736
SPORT SILVER
(SS)
Welded Single-Point Ventilated Lockers
Lockers include a
3" wide 18 gauge full height
door stiffener spot welded
to the inner door face and
MIG welded to the
hinge side as well as
to the top and bottom door
flanges providing a rigid
torque-free door.
Single-point
maintenance-free quiet
latching system with
recessed handle
Features:
Single Tier, 3 wide,
3 openings
Double Tier, 3 wide,
6 openings
COLOR
SELECTION
725
Hallowell Gray (HG)
BODY CONSTRUCTION: 16 gauge body with 18 gauge back, unibody
all-welded, diamond perforated sides
BODY STYLES: Single and double tier
DOOR: 14 gauge door is diamond perforated for added visibility and
ventilation and includes a welded-in full height door stiffener
HINGES: Continuous piano type
HANDLE Deep-drawn seamless stainless steel recessed handle
Single-point maintenance-free quiet latching system 11 gauge MIG
welded latch, continuous
door strike at hinge and latch side
SHELVES: Hat shelf for single tier
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
93
stock
America’s Most Complete Locker
program
Line®
Features:
BODY CONSTRUCTION: All-welded construction,16 gauge
heavy-duty body and 18 gauge back, open-front for
maximum ventilation and quick access, Sides are
diamond perforated for added ventilation and are
formed to be integral with the front vertical frame, base
is reinforced using two front-to-back channel stiffeners
welded to the underside.
BODY STYLES: Open front
HINGES: Continuous piano type
HANDLE Upper serurity box includes a finger pull
padlock hasp
coat rod: Full-width 1” O.D. stainless steel coat rod
NOTES: All lockers ship fully-assembled ready to use,
Number plates (#1-up) are included, Locks are not
included. Order with or without foot locker, Foot locker
is ideal for storing larger items and doubles as a
heavy-duty reinforced seat. The seat lifts up for easy
access to contents from the top. Foot locker includes
a simple rigid padlock hasp (lock not included)
COLOR
SELECTION
736
SPORT SILVER
(SS)
Open-front all-welded lockers are perfect
for equipment, gear and tool storage as
well as for all athletic programs. All lockers
ship fully-assembled ready to use.
When you
demand and
expect maximum
security
ALL-WELDED HIGH SECURITY LOCKERS
Features:
COLOR
SELECTION
711
Platinum (PL)
94
BODY CONSTRUCTION: All-welded construction,16 gauge heavy-duty
body and 18 gauge back, sides formed to be integral with front
vertical frame and are reinforced using two front-to-back channel
stiffeners welded to the underside.
BODY STYLES: One tier, one wide, available in solid or ventilated
versions
HINGES: Continuous piano type
HANDLE Cremone 3-point high-security turn handle latching with
heavy-duty 3/8” lock rods which engage the top and bottom locker
frames while the cam engages the frame at the door jamb near the
handle
door: 14 gauge door with full height welded in door stiffener
SHELVES: Upper welded hat shelf. Additional shelves can be ordered
and are adjustable on 3” centers.
coat rod: 3/8” diameter rod is welded
to underside of upper shelf
hooks: Two single back hooks
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
& double tier models • Economical
BULK STORAGE (BSL) LOCKERS •• Single
Secure • Durable • Fast & Easy Installation
The perfect solution when additional
storage is needed.
• Low life-cycle cost • 16 gauge 1/2" mesh
Superior® all steel storage lockers have been designed to provide
maximum security and durability. Cost effective and ease of
installation make them the perfect choice.
The Heavy-Duty 7 knuckle
hinges and door stops are
welded to the frame for extra
strength and security of
contents, imparting a more
finished and attractive
appearance to the unit.
The door handles are
formed from one solid
piece of steel and are
welded to the frame for
extra strength.
COLOR
SELECTION
736
SPORT SILVER
(SS)
SUPERIOR® PORTABLE GATES
Optional 16 gauge 1/2”
expanded metal top
makes for a very secure
structure adding rigidity
and ensures a higher
level of protection from
theft
THE PERFECT TRAFFIC CONTROL SYSTEM FOR
SCHOOLS, GOVERNMENT AND PRIVATE BUILDINGS.
Security • Traffic Control • Portability
•
•
•
•
Quick and easy installation. Install between two walls instantly without anchors
Simplified, patented pressure lock system
Floor anchors are not required but are available for special installations
Compact, fold-up size and heavy duty swivel casters make
COLOR
moving and storage easy
SELECTION
• Padlock hasp is standard
• Cylinder locks are available for additional security
PLATED
FINISH
• Two or more gates can be joined together for large expanse
™
boltless steel shelving
BY HALLOWELL®
The versatility of our Rivetwell
boltless shelving system
allows you to mix and match
components to meet your
unique application. From general
storage, record
storage to
automotive
tire racks,
Rivetwell
boltless shelving
is the perfect
storage solution.
COLOR
SELECTION
729
Parchment (PT)
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
95
stock
America’s Most Complete Locker
program
Line®
Hallowell Hi-Tech® Industrial grade steel
shelving is a tradition of quality that has set
a new standard in the shelving industry.
Hallowell hi-Tech shelving is a complete shelving line
providing the strength needed to handle most industrial
applications and the versatility necessary for today’s
modern facilities. Every shelving unit is designed and
engineered to meet the highest standards.
A full complement of accessories including full
dividers, partial dividers, label holders,
swinging doors, post splices for multilevel
installations and foot plates are available
to complete your system.
open 5 shelves
open 6 shelves open 7 shelves
COLOR
SELECTION
725
Hallowell Gray
(HG)
High capacity H-Post Shelving
is also available from stock
open 8 shelves
HALLOWELL®
™
CLOSED 5 shelves
CLOSED 6 shelves
CLOSED 7 shelves
CLOSED 8 shelves
No cross braces provides access from all 4 sides.
OUR UNIQUE GRIP NUT DESIGN
CREATES A VERY STRONG AND
RIGID STRUCTURE
PRIMARY Features:
• Four Angle Posts are used per
section allowing units to be
individually located, bolted
side-by-side or bolted back-to-back.
• Each intermediate shelf uses four clips
• Clips key firmly into post slots to hold shelves
securely in place
• Provides positioning of intermediate shelves on
1-1/2” centers
• Bottom shelf is positioned as to prevent debris
from collecting beneath the base
96
COLOR
SELECTION
725
Hallowell Gray
(HG)
5-SHELF UNIT
3-adjustable shelves
7-SHELF UNIT
5-adjustable shelves
8-SHELF UNIT
6-adjustable shelves
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
HALLOWELL® HEAVY GAUGE KD CABINETS
Gives maximum protection to tools,
dies, delicate instruments, supplies,
and personal belongings. Neat and
attractive in appearance. Designed
for government requirements.
PRIMARY Features:
• Cabinet is fabricated from heavy gauge
steel for appearance and durability.
• All metal parts are precision engineered
. No bolt heads show in front or on
side panels.
• Positive three-point locking (top, center
and bottom) and theft resistant hinges
for security.
Storage Model 815
Wardrobe Model 835
• Chrome-plated locking handle has
built-in groove cylinder lock.
• Shelves easily adjust up or down in
2” increments. Triple flanged front
for added strength (300 lb. capacity).
• Doors swing out quietly a full 180°
and are “HAT” section reinforced.
• Corner Foot Gusset
Combination Model 855
COLOR
SELECTION
729
Parchment (PT)
Classic and Galvanite™
Series All-welded Cabinets
Hallowell® DuraTough all-welded storage and
combinationcabinets are designed to withstand
the toughest industrial applications.
COLOR
SELECTION
725
Hallowell Gray
(HG)
DuraTough all-welded cabinets are available in Heavy-Duty and
Extra Heavy-Duty models for both our Classic and Galvanite
corrosion resistant series. Shelves are adjustable on 3" centers.
Classic Series cabinets are fabricated from prime grade cold
rolled sheet steel.
Galvanite Series cabinets are fabricated from
galvannealed sheet steel which has a zinc-iron alloy coating
that is applied at the mill providing protection against
high-humidity and moist environments.
Heavy-Duty cabinets are fabricated from 16 gauge sheet
steel and are fully-welded creating a rigid, durable unit.
Extra Heavy-Duty cabinets are fabricated from
14 gauge steel which is 25% heavier than 16 gauge
providing MAXIMUM durability.
18-gauge full-height
door stiffener
provides maximum
rigidity to both doors
Heavy-Duty 3/16" thick 1/8" thick latch and 3/8"
steel handle with
diameter lock rods
padlock hasp.
insure maximum security
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
97
™
America’s Most Complete Locker
stock
program
Line®
®
by List Industries Inc.®
Recruiter lockers are
made in our North
Florida manufacturing
facility. This guarantees
you absolute quality
control and on-time
delivery.
Recruiter lockers are crafted of furniture
grade red oak and finished using three
coats of high grade cabinet lacquer. Red
oak is naturally moisture and mildew
resistant so you can be sure to benefit
from your investment for years to come.
Recruiter lockers are virtually unaffected
by normal locker room conditions and
are designed to stand up to daily use by
today’s athletes!
In addition to our standard stock designs
and sizes, our engineers are readily
available to assist you in custom
designing a locker to meet your specific
needs. (See page 48) Be it a fitness
center, team locker room, country club or
resort health spa, we stand behind our
product with a full one year warranty that
covers defects in materials and
workmanship.
• All lockers ship fully-assembled
• Fabricated from furniture
grade red oak
• Strong, durable and long-lasting
• Excellent moisture resistance
• Upper security box door includes
built-in combination lock
• Optional team engraved logo on
security box door
• Lower foot locker/seat allows for
storage of bulk items
• Chrome plated coat rod
• Shoulder pad storage
• 3-coat lacquer finish
Your Most Valuable Recruiting Tool!
98
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
5
THE PRODUCTS ON THESE PAGES SHIP
IN
DAYS FROM RECEIPT OF ORDER.
America’s Most Complete Locker Line®
Superior® Benches, Pedestals & Locks
4850 Hi-Tech Steel
Pedestal
4850-S Hi-Tech Stainless
Steel Pedestal
4810 Heavy-Duty Cast
Iron Pedestal
8032 Adjustable
Steel Pedestal
Benchtop Length
Pedestals Required
Shown with 4820 Pedestals
3’ - 8’
2
4820 Aluminum
Moveable Pedestal
9’ - 12’
3
Note: Benchtop lengths over 15’ will be supplied in sections
Locker Benches are 9-1/2” wide x 1-1/4” thick and made from laminated
all white northern hard maple.
Built-in Combination, combination, Key and Digital Locks
List Industries recommends ZEPHYR® locks for use on all Superior Lockers.
Zephyr®
Built-In
Combination
Locks Available in
spring-bolt and
dead-bolt styles, are
key controlled and
include multiple
combination settings
Zephyr®
Combination
Padlocks
Available standard
and master-keyed,
padlocks can be
used on all locker
types
Zephyr®
Built-In Key
Locks
Available in
spring-bolt and
dead-bolt styles
and available
standard or
master-keyed
Zephyr®
1730
ADA
compliant
for use on
gravity
lift-type
latches
Hallowell
Digital
Locks
Digital locks
allow access
using a
programmable
four-digit code
NOTE: If using a lock on a locker intended to meet ADA guidelines, the lock and locker must both be ADA compliant.
Contact factory or visit our website at www.ListIndustries.com for our current Superior® locker and lock compatibility guide.
Locker Accessories
6" Closed Front Base
(KD lockers only)
Recessed Trim
4" Continuous Z-Base
(KD lockers only)
20 gauge Individual
Slope Top (KD lockers only)
Minimum Punched End
Panel (KD lockers only)
16 Gauge Continuous
Slope Top
Fillers
List Industries Inc. reserves the right to make changes to the information, illustrations, products, services, specifications, availability, plans,
and terms and conditions associated with this catalog at any time, without notice, and without incurring obligations or liability of any kind.
QUICK-SHIP! QUICK-SHIP! QUICK-SHIP!
99
America’s Most
Complete
Locker Line®
800-776-1342
(954) 429-9155
Fax (954) 428-3843
401 Jim Moran Blvd., P.O. Box 9601 Deerfield Beach, FL 33442
www.ListIndustries.com
Printed in USA 07/09 on recycled paper using environmentally friendly inks.
© Copyright 2009 List Industries Inc.