Stainless One-touch fittings
Air cylinder
10-KG
Construction
Guide
Collet
Chuck
Release button (White)
When the fitting is removed from the
tubing, the chuck and collet are
released,thus preventing them from biting
into the tube excessively.
Large retaining force
Air gripper
Has large retaining force while
holding force is increased by the
collet.
Seal
Body (White)
O-ring
Stud
The body and threaded portion can
rotate.
Filter, Pressure
control equipment
Polyurethane
ø4, ø6, ø8, ø10, ø12, ø16
Specifications
Fluid
Maximum operating pressure
Operating vacuum pressure
Proof pressure
Ambient and fluid temperature
Thread
Mounting section
Nut section
Seal (Thread portion)
Grease
Particle generation grade
(Refer to front matter pages 13 to 22 for details.)
Air, Water Note 1)
1.0MPa
–100 kPa
3.0MPa
–5 to 60°C, Water: 0 to 40°C (No freezing)
JIS B 0203 (Taper thread for piping)
JIS B0211 Class 2 (Metric fine thread)
With seal or none Note 2)
Fluorine grease
Grade 3
Note 1) Applicable for general industrial water. Please consult with SMC if using for other kinds of fluid.
Also, the surge pressure must be under the maximum operating pressure.
Note 2) Suffix "S" to the part number, if w/ seal is desired.
Principal Parts Material
Body
Stud
Chuck
Guide
Collet, Release button
Seal, O-ring
Stainless steel 303, PBT
Stainless steel 303 (Thread portion)
Stainless steel 304
Stainless steel 304, Stainless steel 303, POM
POM
NBR
843
Fittings & Tubing
Tubing material
Tubing O.D.
Air preparation
equipment
Suitable for use in CRT production lines where contact with
copper must be avoided, food
processing machines where water or salt water splashes and
clean room where discoloration
of copper material and corrosion
must be avoided.
Applicable Tubing
Flow control
equipment
Effective when piping in a
confined space
Stainless specifications applicable to corrosive environments
Pressure switch
The use of a special profile ensures
sealing and reduces resistance when
the tube is inserted.
Directional control
valve
Tubing
Can be used for a wide range of
pressures from a low vacuum
up to a pressure of 1.0 MPa
Stainless steel 303 adopted for
metal elements
Rotary actuator
Light force for removal
Clean gas filter
Series
Stainless One-touch fittings
10-KG
Model
Hex. socket head male connector
Bulkhead union
10-KGS
10-KGE
Use to connect tubes
through a panel.
Internal hex. allows thread
connection by using an allen
wrench for confined spaces.
Extended male elbow
10-KGW
Universal male elbow
10-KGV
Universal male elbow
allows thread connection
by using a socket wrench
for confined spaces.
Male connector
10-KGH
Bulkhead connector
10-KGE
Male elbow
Use to pipe in the
same direction from
female thread.Most
general style.
10-KGL
Female connector
Union elbow
10-KGF
10-KGL
Use to pipe from male
thread such as pressure
gauge.
Plug-in elbow
10-KGH
10-KGL
Use to connect tubes
in the same direction.
Different diameter straight
Male delta union
10-KGH
10-KGD
Use to connect different
size tubes.
10-KGLU
Use to pipe at right
angles to female thread.
Most general style.
Delta branch
10-KGUD
Use to branch line
from female thread in
both 90° directions.
10-KGT
Use to connect tubes
in both 90° directions.
Different diameter tee
Use to change by
90° in a tube fetching
direction from Onetouch fittings.
10-KGT
Use to connect tubes
with size down in both
90° directions.
Male run tee
Use to branch line
in 90° direction from
female thread.
10-KGY
Use to branch line in
the same direction
from female thread
and in 90° direction.
Different diameter double union "Y"
10-KGUD
Use to four-branch line
in the same direction.
Use to branch line in
triple 90° direction.
10-KGLU
Use to branch line
at right angles.
10-KGT
Union tee
10-KGD
Branch union elbow
844
Male branch tee
Delta union
Use to branch line at
right angles to female
thread.
Use to connect male
thread and tube through
a panel.
Use to connect tubes
at right angles.
Straight union
Male branch connector
Basically, it is used together
with male elbow. Different point
is that it is used for fittings to
avoid from interfering with each
other by making the piping twolevel.
Union "Y"
Use to four-branch line
in the same direction
from female thread.
10-KGU
Use to branch line in
the same direction.
Stainless One-touch fittings
10-KG
Model
Tube cap
10-KGR
10-KGC
Use to change size
of One-touch fittings.
Use to plug unused
tubing.
Applicable tubing
4
6
Connection
threads
8
R
Applicable tubing
10
12
16
Connection
threads
M5 x 0.8 10-KGH04-M5
18
10-KGH04-01
14
10-KGH04-02
M5 x 0.8 10-KGH06-M5
18
10-KGH06-01
14
10-KGH06-02
38
10-KGH06-03
18
10-KGH08-01
14
10-KGH08-02
38
10-KGH08-03
18
10-KGH10-01
14
10-KGH10-02
38
10-KGH10-03
12
10-KGH10-04
14
10-KGH12-02
38
10-KGH12-03
12
10-KGH12-04
38
10-KGH16-03
12
10-KGH16-04
H
(width
Note 1)
L
across øD
flats)
8
8
17
—
10
22
14
—
19.5
10
10
17.8
—
12
22.5
—
14
23
17
—
22
28
14
—
26.5
—
17
22
30
17
—
33.5
29
—
27
22
34.5
19
—
30
22
39.5
—
24
35.5
A∗
M
13.9
18
13.5
14.7
18.5
17
15.5
24
20.5
15.5
26
27.5
22.5
19
28.5
23.5
22
33
27.5
12.7
16
13.5
17
18.5
21
22
25
Effective
Weight
area (mm2)
(g)
Urethane
4
2.4
9
4
16
3.3
4
16
10.4
14
27
21
18.0
19
26
19
30
29.5
30
53
42
34
46.1
51
61
68
47
80.6
∗ Reference dimensions after R thread installation.
Note 1) øD indicates the maximum diameter.
Hexagon socket head male connector: 10-KGS
M5
R
Applicable tubing
Applicable
tubing
Connection threads
Connection
threads
H
Applicable
(width
Connection
Note )
Model
øD
tubing
across
thread R
flats)
O.D. (mm)
M5 x 0.8 10-KGS04-M5 2.5
8
4
18
10-KGS04-01
9.8
3
M5 x 0.8 10-KGS06-M5 2.5
10
18
10-KGS06-01
11.8
6
4
14
10-KGS06-02
13.8
18
5
10-KGS08-01
14
8
10-KGS08-02
14
6
38
10-KGS08-03
18
5
10-KGS10-01
14
17
10-KGS10-02
10
38
10-KGS10-03
8
12
10-KGS10-04
22
14
10-KGS12-02
8
19
38
12
10-KGS12-03
10
12
10-KGS12-04
22
L
A∗
M
18.7
23
19.5
15.6
19
16.4
20
18
24
19.5
21.5
26
21.5
21
20
27.5
22.5
20
12.7
16
13.5
24
28
25.5
27.5
30
27.5
28
33.5
29
28
17
18.5
21
22
Effective
Weight
area (mm2)
(g)
Urethane
4
2.7
3.6
8
3.3
4
9.9
9
10.0
15
12
16.2
11
24
16.2
18
12
26.6
19
35
23
18
44.5
30
∗ Reference dimensions after R thread installation.
Note) øD indicates the maximum diameter.
845
Air gripper
Model
Directional control
valve
Applicable
Connection
tubing
thread R
O.D. (mm)
Flow control
equipment
M5
Filter, Pressure
control equipment
Male connector: 10-KGH
Fittings & Tubing
Use to branch line in
the same direction from
the female thread.
Air preparation
equipment
10-KGU
Rotary actuator
Branch "Y"
Air cylinder
Plug-in reducer
Use to connect tubes
in the same direction,
reducing the size of
tubes.
Pressure switch
10-KGU
Clean gas filter
Different diameter union "Y"
10-KG
Stainless One-touch fittings
Female connector: 10-KGF
Applicable
Connection
tubing
thread Rc
O.D. (mm)
Applicable tubing
Connection
threads
18
14
4
18
14
6
ø
38
18
14
38
8
14
38
10
14
38
12
12
Model
10-KGF04-01
10-KGF04-02
10-KGF06-01
10-KGF06-02
10-KGF06-03
10-KGF08-01
10-KGF08-02
10-KGF08-03
10-KGF10-02
10-KGF10-03
10-KGF12-02
10-KGF12-03
10-KGF12-04
H
(width
Note)
across øD
flats)
14
10
17
14
17
12
19
14
17
14
19
17
17
19
19
19
24
L1
L2
27
31
27.5
31
33.5
29
32.5
33.5
34.5
36.5
35
37
41
11
14
11
13
15
11
13
14
14
15
M
16
17
18.5
21
14
22
18
Effective
Weight
area (mm2)
(g)
Urethane
15
4
23
15
22
10.4
25
17
18.0
24
24
27
29.5
30
36
31
46.1
52
Note) øD indicates the maximum diameter.
Straight union: 10-KGH
ø
2-Applicable tubing
Applicable tubing
O.D. (mm)
Model
4
6
8
10
12
10-KGH04-00
10-KGH06-00
10-KGH08-00
10-KGH10-00
10-KGH12-00
Note)
øD
10.4
12.8
15.2
18.5
20.9
L
M
32.5
34.5
38.5
42.5
44.5
16
17
18.5
21
22
Effective
Weight
area (mm2)
(g)
Urethane
4
3
10.4
4
18.0
6
29.5
11
46.1
14
Note) øD indicates the maximum diameter.
Different diameter straight: 10-KGH
Applicable
tubing b
ø
ø
Applicable
tubing a
Applicable tubing
O.D. (mm)
a
b
6
4
8
6
10
8
12
10
Model
10-KGH04-06
10-KGH06-08
10-KGH08-10
10-KGH10-12
Note)
øD
12.8
15.2
18.5
20.9
L
M1
M2
34.5
38.5
42
44.5
16
17
18.5
21
17
18.5
21
22
Effective
Weight
area (mm2)
(g)
Urethane
4
5
10.4
6
18.0
11
29.5
14
Note) øD indicates the maximum diameter.
Male elbow: 10-KGL
ø
M5
Applicable tubing
Connection threads
R
ø
Applicable tubing
ø
Connection threads
H
Applicable
(width
Connection
Note 1)
Model
tubing
across øD1
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGL04-M5
7
9.3
18
4
10-KGL04-01
10
10.4
14
10-KGL04-02
14
M5 x 0.8 10-KGL06-M5
11.6
7
18
10
10-KGL06-01
6
14
14
12.8
10-KGL06-02
38
17
10-KGL06-03
18
12
10-KGL08-01
14
8
14
15.2
10-KGL08-02
38
17
10-KGL08-03
18
10-KGL10-01
14
17
10-KGL10-02
10
18.5
38
10-KGL10-03
12
22
10-KGL10-04
14
10-KGL12-02
17
38
12
20.9
10-KGL12-03
12
10-KGL12-04
22
38
10-KGL16-03
16
26.5
22
12
10-KGL16-04
L2
A∗
15.6 13.7
22
18
26
16.1 14.7
23
20 27
29
24.5
23 28.5
30.5
27
30
26.5
32
36
31
28.5 33
37
38
34
41
15.3
23
25
17.4
25.5
27.5
29
28
30
31.5
32
33
34.5
37
35.5
37
39.5
44.5
46
øD2 L1
–
10
–
10
12
17
17
20.9
Effective
Weight
area (mm2)
(g)
Urethane
12.7
3.5
2.7
10
16
4.2
19
3.2
13.5
3.5
12
10
17
9.0
33
13
14.9
21
18.5
35
14.9
25
26
21
25.0
36
63
28
38
22
39.7
65
101
59.6
25
105
70.6
M
∗ Reference dimensions after R thread installation.
Note 1) øD1 indicates the maximum diameter.
846
Stainless One-touch fittings
10-KG
ø
ø
Applicable
tubing
L2
24
18.5 26.5
30.5
26.5
29.5
21
33
35
34
24 37
38
40
27 41
44.5
42.5
29 43.5
46.5
L3 A ∗ M
29.5
32
36
33
36
39.5
41.5
41.5
44.5
45.5
49.5
50.5
54
53
54
57
P
Q1 Q2
25.5
27.5 16 10.4 18.5 10
30
29.5
32
17 12.8 20.5 12
33.5
35
38
38.5 18.5 15.2 24.5 14
39
43.5
44 21 18.5 28 16
45.5
47
47.5 22 20.9 30 18
49
Effective
Weight
area (mm2)
(g)
Urethane
10
4.1
12
4.1
21
4.3
13
15
22
11.0
35
18.2
29.0
45.2
27
35
41
42
64
57
58
65
Rotary actuator
ø
L1
Air gripper
ø
H
Applicable
(width
Connection
Note)
tubing
Model
øD
across
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGLU04-M5
11
18
4
10.4
10-KGLU04-01
14
14
10-KGLU04-02
M5 x 0.8 10-KGLU06-M5
13
18
10-KGLU06-01
12.8
6
14
14
10-KGLU06-02
38
17
10-KGLU06-03
18
10-KGLU08-01
14
8
17
15.2
10-KGLU08-02
38
10-KGLU08-03
14
10-KGLU10-02
19
38
10
18.5
10-KGLU10-03
12
22
10-KGLU10-04
14
10-KGLU12-02
38
12
22
20.9
10-KGLU12-03
12
10-KGLU12-04
∗ Reference dimensions after R thread installation.
Connection threads
Note) øD indicates the maximum diameter.
Directional control
valve
M5
Air cylinder
Male branch connector: 10-KGLU
R
ø
ø
Applicable
tubing
Connection threads
Universal male elbow: 10-KGV
Applicable tubing
ø
R
Effective
Weight
area (mm2)
(g)
Urethane
20.5 11 18.5 15
6
2.9
16
22 14.5 26.5 22.5
14
7
23.5 12 18.5 15
3.8
15
24 14.5 26.5 22.5 17
5.9
26
23.5 18.5 31 25
24
15.5 28.5 24.5
11.2
28.5
30
18.5 31.5 25.5 18.5
14.3
47
27.5 20.5 36.5 30
40
19.5 35.5 29.5
20.3
31
21
49
20.5 36.5 30
63
22 38.5 32
34
22
30.8
80
25 41.5 33.5
øD2 L1
9.8
13.4
9.8
13.4
15.3
17.6
20.6
20.6
25.2
L2
L3
A∗
M
Air preparation
equipment
H
Applicable
Connection
(width
Note)
Model
tubing
across øD1
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGV04-M5
4
8
10.4
18
10-KGV04-01
M5 x 0.8 10-KGV06-M5
8
18
12.8
10-KGV06-01
6
14
10
10-KGV06-02
18
10-KGV08-01
12
14
8
15.2
10-KGV08-02
38
14
10-KGV08-03
14
10-KGV10-02
10
14
18.5
38
10-KGV10-03
38
10-KGV12-03
12
17
20.9
12
10-KGV12-04
Pressure switch
ø
M5
Fittings & Tubing
ø
Filter, Pressure
control equipment
Flow control
equipment
ø
Clean gas filter
ø
ø
∗ Reference dimensions after R thread installation.
Note) øD1 indicates the maximum diameter.
Applicable tubing
Connection threads
847
10-KG
Stainless One-touch fittings
Union elbow: 10-KGL
2-Applicable tubing
ø
ø
ø
Applicable tubing
O.D. (mm)
Model
4
6
8
10
12
16
10-KGL04-00
10-KGL06-00
10-KGL08-00
10-KGL10-00
10-KGL12-00
10-KGL16-00
øD
Note 1)
10.4
12.8
15.2
18.2
20.9
26.5
L
Q
M2
18
20
23
26.5
28.5
34
4.5
5.3
6
6.8
7.5
10
16
17
18.5
21
22
25
ø
Effective
Weight
area (mm2)
(g)
Urethane
4.2
6
9.0
6
14.9
10
25.0
17
39.7
21
70.6
29
Note 1) øD indicates the maximum diameter.
Branch union elbow: 10-KGLU
ø
Applicable tubing
O.D. (mm)
Model
4
6
8
10
12
10-KGLU04-00
10-KGLU06-00
10-KGLU08-00
10-KGLU10-00
10-KGLU12-00
Note)
L1
øD
L2
Q1
Q2
M
P
10
12
14
16
18
16
17
18.5
21
22
10.4
12.8
15.2
18.5
20.9
ø
10.4 18.5 24 18.5
12.8 21 27.5 20.5
15.2 24 32 24.5
18.5 27 36.5 28
20.9 29 40 30
Effective
Weight
area (mm2)
(g)
Urethane
4.1
6
11.0
8
18.2
15
29.0
25
45.2
32
ø
Note) øD indicates the maximum diameter.
3-Applicable tubing
ø
Plug-in elbow: 10-KGL
ø
Applicable
tubing
ø
Applicable Applicable
tubing
fitting
O.D. (mm) size ød
4
4
6
6
8
8
10
10
12
12
Model
10-KGL04-99
10-KGL06-99
10-KGL08-99
10-KGL10-99
10-KGL12-99
Note 1)
øD1
10.4
12.8
15.2
18.5
20.9
øD2
L1
L2
8
10
12
14
16
18
20
22.5
25.5
27
A
M
25 14.5 16
27.5 17
17
31.5 21 18.5
35.5 23.5 21
37.5 26
22
Effective
area (mm2)
Urethane
4.2
9.0
14.9
25.0
39.7
Weight
(g)
8
10
14
25
28
Note) øD1 indicates the maximum diameter.
Applicable fitting size
ød
ø
ø
ø
848
10-KG
Stainless One-touch fittings
ø
R
ø
Applicable tubing
ø
øD2
L1
L2
A∗
M
Effective
Weight
area (mm2)
(g)
Urethane
8
30
18 37.5
43.5
30.5
40
20
46
48
43.5
23 49.5
51.5
56.5
26.5 58.5
65
57.5
28.5 59.5
66
10
8
10
12
17
17
32
38.5 16
42.5
33.5
42.5
17
46.5
48
47
51 18.5
52.5
59.5
61
21
66
62
63.5 22
68.5
3.0
11
23
38
11
26
41
67
30
47
74
66
76
145
68
78
147
4.0
3.0
8.6
14.2
23.8
37.7
Rotary actuator
ø
Applicable tubing
H
Applicable
Connection
Note)
(width
øD1
tubing
Model
across
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGW04-M5 8
18
4
10-KGW04-01 10 10.4
14
10-KGW04-02 14
M5 x 0.8 10-KGW06-M5 8
18
10-KGW06-01 10
6
12.8
14
10-KGW06-02 14
38
10-KGW06-03 17
18
10-KGW08-01 12
14
8
10-KGW08-02 14 15.2
38
10-KGW08-03 17
14
10-KGW10-02
17
38
10
10-KGW10-03
18.5
12
10-KGW10-04 22
14
10-KGW12-02
17
38
12
10-KGW12-03
20.9
12
10-KGW12-04 22
Air gripper
M5
Air cylinder
Extended male elbow: 10-KGW
Note 1) øD1 indicates the maximum diameter.
Connection threads
Directional control
valve
∗ Reference dimensions after R thread installation.
ø
2-Applicable
tubing
ø
ø
A∗
M
Effective
Weight
area (mm2)
(g)
Urethane
15.6 13.7
22
10
18
26
— 16.1 14.7
23
10
20
27
29
24.5
12
23 28.5
30.5
27
30
17 26.5
32
36
31
17 28.5 33
37
38
20.9 34
40.5
—
15.3 12.7
23
16
25
17.4 13.5
25.5
27.5 17
29
28
30 18.5
31.5
32
33
21
34.5
37
35.5
37
22
39.5
44.5
25
46
4.5
4.1
4.5
11.0
18.2
29.0
45.2
59.6
84
3.5
13
19
4.4
12
20
34
14
22
36
31
29
39
66
31
41
68
112
116
∗ Reference dimensions after R thread installation.
Connection threads
Note 1) øD1 indicates the maximum diameter.
Union tee: 10-KGT
3-Applicable tubing
ø
ø
ø
ø
ø
Applicable
tubing
O.D. (mm)
4
6
8
10
12
16
Model
10-KGT04-00
10-KGT06-00
10-KGT08-00
10-KGT10-00
10-KGT12-00
10-KGT16-00
øD
Note 1)
10.4
12.8
15.2
18.5
20.9
26.5
L
Q
M
18
20
23
26.5
28.5
34
4.5
5.3
6
6.8
7.5
10
16
17
18.5
21
22
25
Effective
area (mm2)
Urethane
4.4
10.6
17.7
28.4
45.4
70.6
Weight
(g)
7
10
15
25
29
40
Note 1) øD indicates the maximum diameter.
849
Filter, Pressure
control equipment
L2
Fittings & Tubing
R
L1
Air preparation
equipment
Connection threads
øD2
Pressure switch
ø
2-Applicable
tubing
H
Applicable
Connection
Note 1)
(width
øD1
tubing
Model
across
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGT04-M5 7
9.3
18
4
10-KGT04-01 10
10.4
14
10-KGT04-02 14
M5 x 0.8 10-KGT06-M5 7 11.6
18
10-KGT06-01 10
6
14
10-KGT06-02 14 12.8
38
10-KGT06-03 17
18
10-KGT08-01 12
14
8
10-KGT08-02 14 15.2
38
10-KGT08-03 17
18
10-KGT10-01
14
10-KGT10-02 17
10
18.5
38
10-KGT10-03
12
10-KGT10-04 22
14
10-KGT12-02
17
38
12
10-KGT12-03
20.9
12
10-KGT12-04 22
38
10-KGT16-03
16
22 26.5
12
10-KGT16-04
Clean gas filter
M5
Flow control
equipment
Male branch tee: 10-KGT
10-KG
Stainless One-touch fittings
Different diameter tee: 10-KGT
Applicable tubing b
ø
ø
ø
Applicable
tubing a
Applicable tubing
O.D. (mm)
a
b
4
6
6
8
8
10
10
12
Model
10-KGT04-06
10-KGT06-08
10-KGT08-10
10-KGT10-12
Note)
øD1
øD2
12.8
15.2
18.5
20.9
10.4
12.8
15.2
18.5
L1
L2
Q
M1
M2
19.5 18 4.5 17
16
22.5 20 5.3 18.5 17
26.5 23
6
21 18.5
28.5 26.5 6.8 22
21
Effective
area (mm2)
Urethane
6.5
16.4
27.2
44.5
Weight
(g)
5
8
14
21
Note) øD1 indicates the maximum diameter.
ø
ø
Applicable
tubing a
Male run tee: 10-KGY
M5
ø
ø
H
Applicable
(width
Connection
Note 1)
øD1
tubing
Model
across
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGY04-M5 7 9.3
18
4
10-KGY04-01 10
10.4
14
10-KGY04-02 14
M5 x 0.8 10-KGY06-M5 7 11.6
18
10-KGY06-01 10
6
14
10-KGY06-02 14 12.8
38
10-KGY06-03 17
18
10-KGY08-01 12
14
8
10-KGY08-02 14 15.2
38
10-KGY08-03 17
18
10-KGY10-01
14
10-KGY10-02 17
10
18.5
38
10-KGY10-03
12
10-KGY10-04 22
14
10-KGY12-02
17
38
12
10-KGY12-03
20.9
12
10-KGY12-04 22
38
10-KGY16-03
16
22 26.5
12
10-KGY16-04
2-Applicable tubing
R
Connection threads
2-Applicable tubing
ø
øD2
L1
L2
L3
A∗
M
Effective
Weight
area (mm2)
(g)
Urethane
— 15.6 13.7
22
10 18
26
— 17.1 14.7
23
10 20 27
29
24.5
12 23 28.5
30.5
27
30
17 26.5
32
36
31
17 28.5 33
37
38
20.9 34
41
14.8 25.4
36
—
38
17.1 28.7
39
41
42.5
43.5
45.5
47
49.5
— 50.5
52
54.5
53.5
55
57.5
65.5
67
12.7
4.5
16
4.4
13.5
4.5
17
10.6
17
10.6
18.5
17.7
21
28.4
22
45.4
25
68
94.9
3.5
13
19
4.5
12
20
34
14
22
36
31
29
39
66
31
41
68
112
116
ø
∗ Reference dimensions after R thread installation.
Note 1) øD1 indicates the maximum diameter.
ø
Connection threads
Male delta union: 10-KGD
M5
2-Applicable
tubing
ø
ø
ø
ø
ø
Connection threads
R
2-Applicable
tubing
ø
ø
ø
ø
H
Applicable
(width Note)
Connection
tubing
Model across øD
thread R
O.D. (mm)
flats)
M5 x 0.8 10-KGD04-M5
11
18
4
10-KGD04-01
10.4
14
10-KGD04-02 14
M5 x 0.8 10-KGD06-M5
13
18
10-KGD06-01
6
12.8
14
10-KGD06-02 14
38
10-KGD06-03 17
18
10-KGD08-01
14
8
10-KGD08-02 17 15.2
38
10-KGD08-03
14
10-KGD10-02
19
38
10
10-KGD10-03
18.5
12
10-KGD10-04 22
14
10-KGD12-02
38
12
10-KGD12-03 22 20.9
12
10-KGD12-04
L1
L2
A∗
24
26.5
30.5
26
29
32.5
34.5
33.5
36.5
37.5
39.5
40.5
44
42
43
46
25.5
27.5
30
28.5
31.5
33
34.5
37
38
38.5
43
43.5
45
46.5
47
48.5
M
Q
Effective
Weight
area (mm2)
(g)
Urethane
18.5
20.5
23.5
26.5
28.5
4.3
16
8.7
17
9.9
6.0
4.3
18.5 11.1
11.0
18.2
21 12.8
29.0
22 13.9
45.2
10
12
21
12
14
21
34
26
35
39
40
62
55
56
63
ø
∗ Reference dimensions after R thread installation.
Note) øD indicates the maximum diameter.
850
Connection threads
Stainless One-touch fittings
10-KG
Delta union: 10-KGD
øD Note)
L
Q
M
4
6
8
10
12
10-KGD04-00
10-KGD06-00
10-KGD08-00
10-KGD10-00
10-KGD12-00
10.4
12.8
15.2
18.5
20.9
18.5
20.5
23.5
26.5
28.5
8.7
9.9
11.1
12.8
13.9
16
17
18.5
21
22
Effective area
Weight
(mm2)
(g)
Urethane
4.1
5
11.0
7
18.2
11
29.0
19
45.2
24
Air cylinder
Model
ø
M5
H
Applicable
tubing O.D. Connection
thread R
(mm)
2-Applicable tubing
M5 x 0.8
18
14
4
M5 x 0.8
18
14
6
38
18
ø
ø
ø
14
38
8
Connection threads
R
2-Applicable tubing
14
38
10
12
14
38
12
ø
12
Note)
(width
across flats)
Model
10-KGU04-M5
10-KGU04-01
10-KGU04-02
10-KGU06-M5
10-KGU06-01
10-KGU06-02
10-KGU06-03
10-KGU08-01
10-KGU08-02
10-KGU08-03
10-KGU10-02
10-KGU10-03
10-KGU10-04
10-KGU12-02
10-KGU12-03
10-KGU12-04
11
14
13
14
17
17
19
22
22
øD
L
P
39.5
10.4 42
46
42.5
45.5
12.8
49
51
52.5
15.2 55.5
56.5
61
18.5 62
65
64.5
20.9 65.5
68.5
A∗
M
36
10.4 38 16
40
39
41.5
17
12.8
43
44.5
48.5
15.2 49.5 18.5
50
55
18.5 55.5 21
57
58.5
20.9 59 22
60.5
Effective area
Weight
(mm2)
(g)
Urethane
4
2.2
11
4.2
20
12
2.2
11
21
10.6
34
15
23
17.7
35
30
40
28.4
65
32
40
45.4
65
∗ Reference dimensions after R thread installation.
ø
ø
Note) øD indicates the maximum diameter.
Fittings & Tubing
Connection threads
Double branch: 10-KGUD
4-Applicable tubing
18
14
6
18
14
(width
across flats)
Note)
øD1 øD2
L
I
A∗
Q
Effective area
(mm2) Weight
(g)
Urethane
17
4.2
16 10.4
25
M
P
10-KGUD04-01 13
43.5
39.5
9.7
10.4 12.8
21
10-KGUD04-02 14
41
47
10-KGUD06-01
50.5
46.5
11.7 17 12.8
10.6
26
29
17 12.8 15.2
10-KGUD06-02
47.5
53.5
∗ Reference dimensions after R thread installation.
Note) øD indicates the maximum diameter.
ø
Clean gas filter
ø
ø
4
H
Model
Pressure switch
Applicable
tubing O.D. Connection
thread R
(mm)
ø
Flow control
equipment
Branch "Y": 10-KGU
Filter, Pressure
control equipment
ø
Directional control
valve
Air gripper
Note) øD indicates the maximum diameter.
Air preparation
equipment
ø
ø
Applicable
tubing O.D.
(mm)
Rotary actuator
3-Applicable tubing
ø
Connection threads
851
Stainless One-touch fittings
10-KG
Union "Y": 10-KGU
Model
øD
L1
L2
P
Q
4
6
8
10
12
10-KGU04-00
10-KGU06-00
10-KGU08-00
10-KGU10-00
10-KGU12-00
10.4
12.8
15.2
18.5
20.9
34
37
42.5
48
51
18
20
24.5
27.5
30
10.4
12.8
15.2
18.5
20.9
9.7
11.7
13.7
16.1
18.1
ø
ø
Applicable
tubing O.D.
(mm)
Effective area
Weight
(mm2)
(g)
Urethane
16
4.2
7
17
10.6
9
18.5
17.7
11
21
28.4
16
22
45.4
23
Note)
M
Note) øD indicates the maximum diameter.
3-Applicable tubing
ø
Different diameter union "Y": 10-KGU
Applicable tubing a
ø
ø
Applicable tubing a
Applicable tubing
O.D. (mm)
a
4
6
8
10
Note) Note)
øD1 øD2 L1
Model
b
6
8
10
12
10-KGU04-06
10-KGU06-08
10-KGU08-10
10-KGU10-12
10.4 12.8
12.8 15.2
15.2 18.5
18.5 20.9
L2
P
35 18 10.4
39.5 20 12.8
45 24.5 15.2
49 27.5 18.5
Q
M1
M2
9.7 16
11.7 17
13.7 18.5
16.1 21
17
18.5
21
22
Effective area
Weight
(mm2)
(g)
Urethane
4.2
6
10.6
11
17.7
18
28.4
27
ø
ø
Note) øD1 and øD2 indicate the maximum diameter.
ø
Applicable tubing b
Different diameter double union "Y": 10-KGUD
Applicable tubing
O.D. (mm)
a
4
6
b
6
8
Effective area
Weight
(mm2)
(g)
Urethane
10-KGUD04-06 10.4 12.8 35.5 18.2 10.4 21 9.7 16 17
4.2
10
10-KGUD06-08 12.8 15.2 40.5 20.3 12.8 26 11.7 17 18.5
10.6
17
Note)
Model
Note)
øD1 øD2
L1
L2
P
I
Q
M1
M2
Note) øD1 and øD2 indicate the maximum diameter.
4-Applicable tubing a
ø
Applicable tubing b
ø
ø
ø
Plug-in reducer: 10-KGR
Applicable Applicable
tubing O.D. fitting size
ød
(mm)
ø
Applicable tubing
4
6
Applicable fitting size
ø
ød
ø
8
10
12
6
8
10
4
8
10
12
10
12
12
16
16
Note 1)
Model
10-KGR04-06
10-KGR04-08
10-KGR04-10
10-KGR06-04
10-KGR06-08
10-KGR06-10
10-KGR06-12
10-KGR08-10
10-KGR08-12
10-KGR10-12
10-KGR10-16
10-KGR12-16
øD
10.4
12.8
12.8
15.2
15.2
18.5
20.9
20.9
L
34.5
36.5
39.5
37
37
39.5
42
41
42
44.5
50.5
50.5
Effective area
Weight
(mm2)
(g)
Urethane
1.8
17.5
2.0
16
18
4
3.3
18.5
3
4
21
2.5
18.5 17
3
10.4
4.7
20
4.0
20 18.5
18.0
4.6
32.8
23
33
21
42
24.8
25.5
37
38.7
25.5 22
A
M
Note) øD indicates the maximum diameter.
852
Stainless One-touch fittings
10-KG
(width
across flats)
L
Mounting
hole
M
4
6
8
10
12
16
10-KGE04-00
10-KGE06-00
10-KGE08-00
10-KGE10-00
10-KGE12-00
10-KGE16-00
M12 x 1
M14 x 1
M16 x 1
M20 x 1
M22 x 1
M28 x 1.5
14
17
19
24
27
32
32.5
34.5
38
42.5
44
51
13
15
17
21
23
29
16
17
18.5
21
22
25
H
Effective area
Weight
(mm2)
(g)
Urethane
4
26
10.4
33
18.0
52
29.5
70
46.1
90
80.6
115
Bulkhead connector: 10-KGE
Mounting plate
thickness 7 mm or less
4
Connection
threads
6
18
14
18
14
38
18
Applicable tubing
8
14
38
10
14
38
12
38
12
16
38
12
Model
T (M)
H1 H2
(width
(width
across flats) across flats)
10-KGE04-01
M12 x 1
10-KGE04-02
10-KGE06-01
10-KGE06-02 M14 x 1
10-KGE06-03
10-KGE08-01
10-KGE08-02 M16 x 1
10-KGE08-03
10-KGE10-02
M20 x 1
10-KGE10-03
10-KGE12-03
M22 x 1
10-KGE12-04
10-KGE16-03
M28 x 1.5
10-KGE16-04
14
17
17
14
17
19
17
19
19
22
24
24
27
30
32
L1
L2
27.5
31
28
31.5
33.5
27.5
33
35
34.5
36.5
37
41
40
44
11
15
11
15
17
7.5
13
15
12.5
14
14
18
14
18
Effective area
Weight
(mm2)
(g)
Urethane
16
16
4
35
Mounting
M
hole
13
17
15
10.4
17
18.5
18.0
21
21
29.5
23
22
46.1
29
25
80.6
30
29
28
27
48
53
67
92
59
127
132
Filter, Pressure
control equipment
Applicable
Connection
tubing O.D.
thread Rc
(mm)
øD
10-KGC04-00
10-KGC06-00
10-KGC08-00
10-KGC10-00
10-KGC12-00
10-KGC16-00
10.4
12.8
15.2
18.5
20.9
26.5
L
M
Weight
(g)
17
18.5
20.5
23
24
28
16
17
18.5
21
22
25
3
3
4
6
8
13
Pressure switch
Air preparation
equipment
Note) øD indicates the maximum diameter.
Clean gas filter
Applicable tubing
Note)
Model
Fittings & Tubing
Tube cap: 10-KGC
Applicable tubing
O.D. (mm)
4
6
8
10
12
16
Rotary actuator
T (M)
Air gripper
Model
Directional control
valve
Applicable tubing
Applicable
tubing O.D.
(mm)
Flow control
equipment
Mounting plate
thickness 11 mm or less
Air cylinder
Bulkhead union: 10-KGE
853