Efficient Lighting Systems
ADL DOWNLIGHTS
AUSTRALIAN MADE COMPACT FLUORESCENT
& METAL HALIDE DOWNLIGHTS
2
CONTENTS
INTRODUCTION ADL100 ADL100 SHALLOW ADLH125 ADL125 HID ADL220 CFL ADL220 HID ADLS100 ADLS130 CFL ADLS130 HID P4
P5
P5
P6
P7
P8
P9
P10
P11
P11
Efficient Lighting Systems – An Australian owned company supplying Australian designed, made/assembled products.
Efficient Lighting Systems Pty. Ltd.
WITH OVER 20 YEARS OF EXPERIENCE IN MANUFACTURING
LIGHT FITTINGS, ELS KNOWS WHAT IS REQUIRED
TO MAKE QUALITY PRODUCTS
Good design – Australian designed for Australian conditions is where
it all starts, and where extensive experience is a must. We know what
works, and just as importantly, we know what will not work.
Quality components – only top quality components are used.
World recognised quality component suppliers are chosen for their
quality, not price. With so many unknown new comers in lighting
you will find comfort in the fact that the manufacturers of all our
components are well recognised for top quality.
Independent photometric test reports – There is no need to print
brochures with green trees to suggest energy efficiency. All our products
are supported by independent photometric test reports. Files are
available from the web site and full copies of test reports are available
if required.
EMC compliance – All products are tested for compliance
to AS/NZS CISPR15
Australian assembly and testing – The ultimate final assurance
of quality as all fittings are assembled, electrically tested, and packaged
in our Melbourne based facility. You’re welcome to visit anytime to view
this process.
3
SERIES ADL DOWNLIGHTS
4
AUSTRALIAN MADE COMPACT FLUORESCENT
& METAL HALIDE DOWNLIGHTS
Energy Efficient Compact Fluorescent & Metal Halide Downlights
The ADL CFL & MH downlights are designed specifically for use with energy efficient lamps.
For many years 50w low voltage halogen downlights have been used for general lighting and display lighting.
However, the halogen lamp is not the most energy efficient option. While LED's are growing in popularity for
these types of installations they are often still an expensive option, while compact fluorescent and metal halide
lamps offer energy savings that will result in less green house gas emissions while providing a lower cost
alternative to many LED options. The Australian Building Code section J6 has also now specified maximum
lamp power density in watts/ square metre, and minimum light source efficiency in lumens/watt.
The following chart demonstrates the efficiency of lamps in lumens per watt. This clearly shows that
fluorescent and metal halide lamps produce 3 to 4 times the amount of light for each watt of power compared
to a low voltage halogen lamp.
50w MR16
1000 lumens
20 lumens/watt
18w TC-T
1200 lumens
66 lumens/watt
20w MH
1700 lumens
82 lumens/watt
Maintenance is also greatly reduced with the use of both fluorescent and metal halide lamps with
an average life of 10,000 hours. The fluorescent and metal halide lamps do require purpose made
light fittings to optimise the lamps' superior performance. ELS are pleased to offer the following solutions.
Fluorescent lamps
Best for general lighting of spaces in both residential and commercial installations
Features
• Instant on — hot restrike
• Dimming options available
• Lamp colour choice – 2700k, 3000k, 4000k
• Lamp replacement does not require control gear replacement. The electronic control gear has a life of 50,000 hours
Metal halide
Best for display, accent lighting, retail use — areas that require some sparkle.
Generally not recommended for interior residential use.
Features
• Require a warm up period
• Will not restrike hot – may need a 10 minute cool of period before restrike
• Available in 3000k colour – similar to halogen lamps
• Lamp replacement does not require control gear replacement. The electronic control gear has a life of 50,000 hours
5
ADL100
CEILING OPENING
95
• 20w MH miniature lamps
• 3 reflector beams — narrow, medium, wide
• Anodised aluminium reflector
100
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
102
• Australian made
• Suitable for commercial or retail applications
Description
Part Number
1X20w MH CDM-Tm PGj5 narrow beam
ADL100/20N
1X20w MH CDM-Tm PGj5 medium beam
ADL100/20M
1X20w MH CDM-Tm PGj5 wide beam
ADL100/20W
5000
600
250
10000
1200
500
15000
1800
750
ADL100/20N
ADL100/20M
ADL100/20W
ADL100 SHALLOW
CEILING OPENING
95
• 20w MH miniature lamps
• 2 reflector beams — narrow and medium
70
• Frosted anodised aluminium reflector
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
102
• Australian made
• Suitable for commercial or retail applications
Description
Part Number
1X20w MH CDM-Tm PGj5 narrow beam
ADL100SH/20N
1X20w MH CDM-Tm PGj5 medium beam
ADL100SH/20M
8000
400
16000
800
24000
1200
ADL100SH/20N
ADL100SH/20M
6
ADLH125
CEILING OPENING
116
• Compact fluorescent lamps — 18w
• 2.5mm white polycarbonate trim
• Frosted clip in polycarbonate lens
110
• Anodised aluminium reflector
• Ceiling mounting without tools
2.5
• Suitable for commercial or domestic applications
125
Dimming Type
Part Number
TC-T 18w
High frequency ballast (NON DIM)
ADLH125.51.18.63
Analogue dimmable HF ballast (1-10v)
ADLH125.51.18.64
Digital dimmable HF ballast (DSI)
ADLH125.51.18.65
Digital dimmable HF ballast (DALI)
ADLH125.51.18.66
CEILING OPENING
ADLH125 IP
116
• Compact fluorescent lamps — 18w
• IPX4 from below the ceiling
• Removable twist lock die cast aluminium trim
110
• Clear / frosted glass inlay
• Anodised aluminium reflector
6.5
• Ceiling mounting without tools
• Suitable for commercial or domestic applications
125
Dimming Type
Part Number
TC-T 18w Clear Lens
Part Number
TC-T 18w Frosted Lens
High frequency ballast (NON DIM)
ADLH125.51.18.63.901
ADLH125.51.18.63.900
Analogue dimmable HF ballast (1-10v)
ADLH125.51.18.64.901
ADLH125.51.18.64.900
Digital dimmable HF ballast (DSI)
ADLH125.51.18.65.901
ADLH125.51.18.65.900
Digital dimmable HF ballast (DALI)
ADLH125.51.18.66.901
ADLH125.51.18.66.900
100
100
200
200
300
300
ADLH125.51.18.63.900
ADLH125.51.18.63.901
7
ADL125 MH
• 20w miniature MH or 35w MH lamps
• Anodised aluminium reflector
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
• Australian made
• Suitable for commercial or retail applications
Description
Part Number
1X20w MH CDM-Tm PGj5
ADL125/20
1X35w MH HIT/CDM-T G12
ADL125/35
ADL125/20
ADL125/35
CEILING OPENING
CEILING OPENING
116
116
130
130
125
ADL125/20
125
400
300
800
600
1200
900
ADL125/35
8
ADL 220
CEILING OPENING
206
• Compact fluorescent lamps 14, 17, 18 or 26w
• Aluminium reflector
155
• Steel body and mounting ring
• White polycarbonate trim
• Electronic control gear
• Ceiling mounting without tools
220
• Australian made
Dimming Type
Part Number
TC-T 1x14w
Part Number
TC-T 2x14w
Part Number
TC-T 1x17w
Part Number
TC-T 2x17w
High frequency ballast (NON DIM)
ADL220.51.14.63
ADL220.52.14.63
ADL220.51.17.63
ADL220.52.17.63
Analogue dimmable HF ballast (1-10v)
ADL220.51.14.64
ADL220.52.14.64
ADL220.51.17.64
ADL220.52.17.64
Digital dimmable HF ballast (DSI)
ADL220.51.14.65
ADL220.52.14.65
ADL220.51.17.65
ADL220.52.17.65
Digital dimmable HF ballast (DALI)
ADL220.51.14.66
ADL220.52.14.66
ADL220.51.17.66
ADL220.52.17.66
Dimming Type
Part Number
TC-D 1x18w
Part Number
TC-D 2x18w
Part Number
TC-D 1x26w
Part Number
TC-D 2x26w
High frequency ballast (NON DIM)
ADL220.51.18.53
ADL220.52.18.53
ADL220.51.26.53
ADL220.52.26.53
Analogue dimmable HF ballast (1-10v)
ADL220.51.18.54
ADL220.52.18.54
ADL220.51.26.54
ADL220.52.26.54
Digital dimmable HF ballast (DSI)
ADL220.51.18.55
ADL220.52.18.55
ADL220.51.26.55
ADL220.52.26.55
Digital dimmable HF ballast (DALI)
ADL220.51.18.56
ADL220.52.18.56
ADL220.51.26.56
ADL220.52.26.56
150
80
200
200
300
160
400
300
450
240
600
ADL220.52.14.63
ADL220.51.17.63
ADL220.52.18.53
ADL220.51.26.53
100
OPTIONAL ACCESSORIES
220.G2 - Frosted inner,
clear outer glass
220.G3 - Frosted outer circle
(hole in centre) glass
9
ADL 220 HID
CEILING OPENING
206
• Metal halide lamps 70, 100 or 150w
• White polycarbonate trim
• Aluminium faceted low glare reflector
• Steel body and mounting ring
240
• Electronic control gear available
• Ceiling mounting without tools
• Australian made
220
Dimming Type
Part Number
1x70w E27
Part Number
1x100w E27
Part Number
1x150w E27
Magnetic ballast
ADL220/70
ADL220/100
ADL220/150
High frequency ballast (NON DIM)
ADL220/70E
ADL220/100E
ADL220/150E
Utilization factors UF(F)
SHR NOM = 1.25
Room Reflectances
Room Index
C
W
F
0.75
1.00
1.25
1.50
2.00
2.50
3.00
4.00
5.00
0.70
0.50 0.20
0.30
0.10
0.44
0.41
0.39
0.49
0.46
0.44
0.52
0.49
0.47
0.54
0.52
0.50
0.57
0.55
0.53
0.58
0.57
0.55
0.60
0.58
0.56
0.61
0.60
0.58
0.62
0.61 0.60
0.50
0.50
0.30
0.10
0.20
0.44
0.41
0.39
0.48
0.46
0.44
0.51
0.49
0.47
0.53
0.51
0.49
0.55
0.53
0.52
0.57
0.55
0.54
0.58
0.56
0.55
0.59
0.58
0.57
0.60
0.59
0.58
0.30
0.50
0.30
0.10
0.20
0.43
0.41
0.39
0.47
0.45
0.43
0.50
0.48
0.46
0.51
0.50
0.48
0.54
0.52
0.51
0.55
0.54
0.53
0.56
0.55
0.54
0.57
0.56
0.55
0.58
0.57
0.56
0.00
0.00
0.00
0.38
0.42
0.45
0.47
0.49
0.51
0.52
0.53
0.54
120
240
360
ADL220/70
OPTIONAL ACCESSORIES
220.G2 - Frosted inner,
clear outer glass
220.G3 - Frosted outer circle
(hole in centre) glass
10
ADLS100 MH
CEILING OPENING
95
• 20w MH miniature lamps
• 3 reflector beams — narrow, medium, wide
110
• Anodised aluminium reflector
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
110
• Australian made
• Suitable for commercial or retail applications
Description
Part Number
1X20w MH CDM-Tm PGj5 narrow beam
ADLS100/20N
1X20w MH CDM-Tm PGj5 medium beam
ADLS100/20M
1X20w MH CDM-Tm PGj5 wide beam
ADLS100/20W
ADLS100/20N
5000
600
250
10000
1200
500
15000
1800
750
ADLS100/20M
ADLS100/20W
11
ADLS130 CFL
CEILING OPENING
110
• Compact fluorescent lamp 18w T
• Anodised aluminium reflector
100
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
• Australian made
• Suitable for commercial or domestic applications
Dimming Type
Part Number
High frequency ballast (NON DIM)
ADLS130/18E
Analogue dimmable HF ballast (1-10v)
ADLS130/18ED
Digital dimmable HF ballast (DSI)
ADLS130/18EDD
Digital dimmable HF ballast (DALI)
ADLS130/18DALI
130
100
200
300
ADLS130/18E
ADLS130 MH
CEILING OPENING
110
• 35w MH lamp G12
• Anodised aluminium reflector
120
• Electronic control gear
• Ceiling mounting without tools
• White / silver trim available
• Australian made
• Suitable for commercial or retail applications
Description
Part Number
1X35w MH HIT/CDM-T G12
ADL125/35
250
500
750
ADLS130/35
130
E f ficient L ighting S ys tems has dis tributors
in each capi tal ci t y in Aus tralia and New Zealand.
To find your local dis tributor visi t
w w w.elslighting.com.au
EFFICIENT LIGHTING SYSTEMS
39 TINNING ST BRUNSWICK VIC 3056
PO BOX 5084 MORELAND WEST VIC 3055
PHONE: 03 9222 5522
FAX: 03 9222 5521
EMAIL: info@elslighting.com.au
This catalogue is printed on 100% recycled paper
www.elslighting.com.au