CANADIAN
ENGRAVERS
SUPPLY
ONTARIO
Email: sales@cesco.ca
www.cesco.ca
ALBERTA
Email: salesab@cesco.ca
www.cesco.ca
Badges
Tags
&
Findings
Table Of Contents
A
Acryfil Paint
Adapters
Adhesives
AlumaMark™
Aluminum Oxidant
Aluminum Shields
Anodized Aluminum Tags AS10 Roland® Sheets
Auxiliary Equipment
34
9
29
27
33
16
14
29
36
Badges
2-8
Badge Findings
9
Badge Magnets
10
Beaded Chain
22
Brass Key Tags
20
Brass Oxidant
33
Brass Plates
23-24
Business Cards - Metal
24
Button Machines & Components 37-38
Carabiners
Carton Sealing Tape
CerMark™
Chain
Cleaners & Polishers
Clutches
Coils
Corner Rounders
Crimp Pins
Custom Cut Plates
D
21
30
12
22
31
9
21
36
9
26
Dies
Disks
36
25
E
33
33
28
Engravers Enamel Paint
Engravers Lube
Engraving Table Tape
F
Felt Pads
Filament Tape
Frame Badges
G
G.I. Tags
Heat Tape
Heavy Duty Swivel Clips
Holders Accessories
I
29
30
5
13-14
28
9
4
21
23-24
3
I.D. Key Tags
I.D. Plates
Identifiers
J
Jiffy Bags
B
C
H
30
K
Key Tag Accessories
Key Tags
L
Lacquered Key Tags
Lacquer Sticks
Lanyards
Laserable Key Tags
Laserable Metal Plates
LazrCLEAN™
LaserFrost™
LASERmag®
LaserTape™
Legend Plates
LiquaMASK™
Luggage & Key Tags
Lubricants & Oxidants
M
Magic Peel™
MagMATES
Magnets
Magnetic Tape / Sheeting
Magnetic Biz Cards
Magnetic Key Cases
Medallions
Metal Disks & Plates
Metal Marking Compound
Metal Shear
Metal Tags- Rotary
Military Badges Multi-Mat™
N
Neck Cords
Neck Ribbons
NOVUS™ Acrylic Polish
1
21
19-20
20
33
22
20
26
31
27
11
31
35
31
19-20
33
29
11
12
11
11
21
15-16
25-26
12
36
13
3
31
22
6
31
P
Packaging Material
Paint Kits
Pet tags
Photo Brasive LaserTape™
Photo I.D. Clips
Pin & Clutch Back
Plaque pres. boxes
Plaque pouches
Plastic Key Tags
Plastic Shear
Plates
Pocket Accessories
Poly Bags
Pre-mask Tape
R
Ribbon Bars
Romark Paint Kits
Rub’n Buff®
S
Safety Paints
Seklema™ Mat
Self-locking Pins
Shears
Snap Clips
Solid Brass Badges
Stainless Steel Tags
Standard Pins
Straps
Sublimatable Tags
Sublimatable Key Tags
Sublimation Tape
Super Lube
T
Tag Accessories
Tags
Tape Dispensers
Tapes & Adhesives
Tri-Flow®
V
Valve Action Paint
Velcro
#
3M™ Adhesive
30
34
13
32
9
9
30
30
19
36
25-27
4
30
29
9
34
34
34
32
9
36
9
2
12
9
22
17-18
19
28
33
13,22
13-20
28
28-29
33
33
29
28
Badges
Solid Brass Badges
COLOUR
Satin Silver
Glossy Silver
Glossy Gold
Satin Gold
3/4” x 3”
Satin Silver
Glossy Silver
Glossy Gold
Satin Gold
5/8” x 2-1/2”
Satin Silver
Glossy Silver
Glossy Gold
Satin Gold
1/2” x 2-3/8”
Satin Silver
Glossy Silver
Glossy Gold
Satin Gold
3/8” x 2-1/4”
Satin Silver
Glossy Silver
Glossy Gold
Satin Gold
• Gauge: .050 Solid Brass. Available as blank, pin or clutch back.
• Pin and clutch backs are electronically fastened to badge blank.
• Solid brass badges are lacquer coated and have protective masking.
• Use Brass Oxidant or Engraver’s Enamel to blacken letters (pg26).
• Can be engraved with Non-Rotating Diamond Drag or
Rotary Burnisher.
SIZE
BLANK
PIN
CLUTCH
3/8” x 21/4”
-----
MP1 - 334
MP1 - 344
MP1 - 714
MP1 - 734
-----
1/2” x 23/8”
M2 - 334
M2 - 344
M2 - 714
M2 - 734
MP2 - 334
MP2 - 344
MP2 - 714
MP2 - 734
MC2 - 334
MC2 - 344
MC2 - 714
MC2 - 734
5/8” x 21/2”
M3 - 334
M3 - 344
M3 - 714
M3 - 734
MP3 - 334
MP3 - 344
MP3 - 714
MP3 - 734
MC3 - 334
MC3 - 344
MC3 - 714
MC3 - 734
3/4” x 3”
M4 - 334
M4 - 344
M4 - 714
M4 - 734
MP4 - 334
MP4 - 344
MP4 - 714
MP4 - 734
MC4 - 334
MC4 - 344
MC4 - 714
MC4 - 734
1” x 3”
M5 - 334
M5 - 344
M5 - 714
M5 - 734
MP5 - 334
MP5 - 344
MP5 - 714
MP5 - 734
MC5 - 334
MC5 - 344
MC5 - 714
MC5 - 734
Colours:
Satin Silver
-334
Glossy Silver
-344
Glossy Gold
-714
Satin Gold
-734
Bevelled Metal Badges
Oval style
STYLE
COLOUR
SIZE
BLANK
PIN
Gold
Silver
11/2” x 2”
BV7 - OV1
BV3 - OV1
BV7 - P - OV1
BV3 - P - OV1
Gold
Silver
2” x 25/8”
BV7 - OV2
BV3 - OV2
BV7 - P - OV2
BV3 - P - OV2
Gold
Silver
1” x 3”
BV7 - RT1
BV3 - RT1
BV7 - P - RT1
BV3 - P - RT1
Gold
Silver
11/2” x 3”
BV7 - RT3
BV3 - RT3
BV7 - P - RT3
BV3 - P - RT3
Oval
Rectangle
Rectangle style
Colours:
Silver-BV3
Back with magnet
Gold-BV7
• Edges have bevelled look. Bright gold and
bright silver finishes.
• Available with pin back or blank flat back.
• Steel metal badge frames. (Magnetic)
• Blank back allow magnets to be used.
*Magnet sold separately.
2
Badges
1” x 3”
Badges & Identifiers
Plastic Badges
Metallic Badges - Round Corners 1” x 3”
SURFACE
CORE
Brushed Silver
Brushed Aluminum
Brushed Gold
European Gold
BP3-734RC
Brushed Gold Pin Back
532NM-734RC Brushed Gold Blank Back
gauge
PIN back
1” x 3”
BLANK back
1” x 3”
3/32”
3/32”
3/32”
3/32”
BP3 - 334-RC
532NM - 334-RC
BP3 - 354-RC
532NM - 354-RC
BP3 - 734-RC
532NM - 734-RC
BP3 - 754-RC
532NM - 754-RC
PIN back
1” x 3”
BP3 - 204
BLANK back
132 - 204-13
BP3 - 402
132 - 402-13
Black
Black
Black
Black
Plastic Badges (Laminated) - Square Corners 1” x 3”, Bevelled Edges
SURFACE
BP3-602 Red/White Pin Back
132-602 Red/White Blank Back
White
Black
Blue
Red
Military Badges
CORE
gauge
3/32”
3/32”
3/32”
3/32”
Black
White
White
White
1” x 3”
BP3 - 512
132 - 512-13
BP3 - 602
132 - 602-13
Military Badge - Square Corners 1/2” x 2 1/2”, Bevelled Edges
SURFACE
BC4-402 Black/White Clutch Back
CORE
Black
White
Blue
White
BC4-512 Blue/White Clutch Back
• Minimum 50 pieces per colour • 3/32” thick plastic badges or blanks.
• Custom sizes available. • Available with Pin or Blank Back.
• Additional colours and sizes available in 1/16” thick. See colour charts.
gauge
clutch back
3/32”
3/32”
BC4 - 402
Pin Back
1/2” x 2-1/2”
BC4 - 512
Clutch Back
Rowmark® Identifiers
Round Corners
• Identifiers are plastic with blank backs. (pin or clutch backs available by special order)
• “Oval and Round Corner” accommodates 1/16” thick material. • “Thin Rectangle” accommodates 1/32” thick.
13/8” x 23/4”
13/16” x 213/16”
9/16” x 21/2”
Display Board
IBF-KIT
Thin Rectangle
9/16” x 29/16”
STYLE
COLOUR
INSERT SIZE
INSERT
PART NO.
Round
Corners
Silver
Gold
Black
9/16” x 21/2”
1/16”
IBF - 301
IBF - 701
IBF - 401
Round
Corners
Silver
Gold
Black
13/16” x 213/16”
1/16”
IBF - 302
IBF - 702
IBF - 402
Round
Corners
Silver
Gold
Black
13/8” x 23/4”
1/16”
or 1/8”
IBF - 303
IBF - 703
IBF - 403
Thin
Rectangle
Square
Corners
Silver
Gold
Black
9/16” x 29/16”
1/16”
IBF - 3RT
IBF - 7RT
IBF - 4RT
Oval
Silver
Gold
Black
11/8” x 23/16”
1/16”
IBF - 3OV
IBF - 7OV
IBF - 4OV
Oval
11/8” x 23/16”
Display Board
3
IBF - KIT
Pocket Accessories
Pocket Adapters
3 - 1/2”
Pocket Insert
Side View
3”
SIZE
SURFACE
CORE
11/4” x 3”
White
Black
11/4” x 3”
Black
White
FINISH
PART NO.
Satin Finish
PKT - 204
Matte Finish
PKT - 2 - 204
Satin Finish
PKT - 402
Matte Finish
PKT - 2 - 402
• Min. 50 pieces/colour. See colour charts for additional colours. • Satin or Matte finish. • Custom sizes available - provide dimensions.
Pocket Badges
900-035 1” x 3”
Metal - Bright Gold
900-020 7/8” x 27/8”
Clear Plastic Pocket Insert
Attach to badge blank
900-035P 1” x 3”
with clear plastic
(Minimum 50 pieces)
Holders Accessories
Dual lock
SIZE
DESCRIPTION
wire clips
PART NO.
1/2”
Dense side mounts to trough.
Light side mounts to sign.
(Adhesive backed.)
1/2” x
12”
• Used for holding signs in Designer and Premier holders.
• Allows for easy removal of names using a suction cup.
plastic hanger
31/2”
17/8”
DESCRIPTION
PART NO.
3 1/2”
For frames 6”
and under.
99W-350
6”
For frames 8”
and under.
99W-600
• Apply to the back of Designer and Designer II frames which will be
used on partitions.
SIZE
DESCRIPTION
PART NO.
11/2”
dia.
Used for removing plates
from holders.
SUC-000
13/4”
Metal hanger for hanging
signs on windows.
Velcro®
SUC-175
SIZE
DESCRIPTION
31/2” long
17/8” high
21/8” wide
Clear plastic hanger
mounts over the top of
office partitions from
1-1/2” to 2” thick. Signs
can be mounted with
double-sided tape.
21/8”
SIZE
99D-512
1/2”
suction cups
900-007 1” x 11/4”
Pin-Pocket Clip Combo
(2pcs)
900-021 21/2” x 11/2”
Slip-On
Attach to badge blank
(Hook and Loop)
SIZE
DESCRIPTION
PART NO.
1” x 75 ft.
Hook
99H-000
roll
Loop
99L-000
1” x 12”
Hook
99H-012
Loop
99L-012
Strip
• Nylon - white. • Adhesive back.
PART NO.
v-clip & cable SIZE
DESCRIPTION
PART NO.
1”
For mounting to T-Bar in
suspended ceilings and
over double frames.
99V-000
12”
Zinc-plated 1” loopedend cables. Holds up to
25 lbs.
9CB-000
9P-110
• Custom sizes are available by quotation.
4
Accessories
1-1/4 x 3”
Front
1 - 1/4”
Plastic - Fold-Over Style (1/16” thick)
Frame Badges
Double Frame Badge
1/2” x 2-1/2
COLOUR
• Available as blank only.
• Accepts 1/32 thick inserts.
• Bright Gold only.
INSERT SIZES
Top -
Bright
Gold
1/4” x 2-1/2”
PART NO.
1/2 x 21/2
1/4 x 21/2
MDF - 700
Bottom -
Round Metal Frame Badges (Non-Magnetic)
1-3/8” x 2-3/4”
R3-700
COLOUR
Silver
15/16” x 2-15/16”
Silver
Gold
5/8” x 2-5/8”
5/8” x 25/8”
Gold
R2-700
R1-700
BLANK
PIN
CLUTCH
R1 - 300
RP1 - 300
--
R1 - 700
RP1 - 700
--
R2 - 300
RP2 - 300
--
R2 - 700
RP2 -­700
RC2 - 700
R3 - 300
RP3 - 300
--
R3 - 700
RP3 - 700
RC3 - 700
INSERT SIZE
15/16” x 215/16”
Silver
Gold
13/8” x 23/4”
Colours:
• Available as blank, pin or clutch back. Gold and silver finishes.
• Accepts inserts, 1/32” thick.
• Non-magnetic metal badge frame.
Silver-300
Gold-700
Metal Frame Badges (Magnetic)
INSERT SIZE
BLANK
PIN
CLUTCH
Silver
Gold
1/2” x 21/2”
MS - 300
MG - 700
MPS - 300
MPG - 700
MCS - 300
Silver
Gold
1” x 3”
MS - 13 - 300
MG - 13 - 700
MPS - 13 - 300
MPG - 13 - 700
MCS - 13 - 300
MCG - 13 - 700
Silver
Gold
13/8” x 23/4”
MS - L - 300
MG - L - 700
MPS - L - 300*
MPG - L - 700*
MCS - L - 300*
MCG - L - 700*
Silver
Gold
11/16” dia.
MS - 116
MG - 116
MPS - 116
MPG - 116
--
Silver
Gold
19/16” x 23/8”
MS - OVL
MG - OVL
--
--
COLOUR
13/8” x 23/4”
MS-L-300
1” x 3”
1/2” x 21/2”
11/16”
Insert
MS-13-300
MS-300
Colours:
19/16” x 23/8”
Silver-300
Insert
Gold-700
* By special order: Minimum 50 pieces.
• Available as blank, pin or clutch back.
•Gold and silver finishes.
• Accepts inserts, 1/32” thick.
• Magnetic metal badge frame.
5
Sublimatable Badges - FR Plastic
Sublimatable Badges
Badges
BADGES, 3/32” thick
FR-100 Gloss 1” x 3”
FRM-100 Matte 1” x 3”
5501
5515
FR-125 Gloss 11/4” x 3” 5502
FRM-125 Matte 11/4” x 3” 5516
FR-150
Gloss
FR-230 Gloss 2” x 3” 5530
FRM-230 Matte 2” x 3” 5531
FR-OVL Gloss 11/2” x 3” 5532
FRM-OVL Matte 11/2” x 3” 5533
*Jig available in CESCO Sublimation Catalogue
Part No. JIG-5941-BDL
11/2” x 3” 5786
Sublimatable FR Plastic
Lanyard Slotted Tag
LAPEL BUTTON
2” x 31/4”, 1/2” slot
badge INSERTS
With pin, 3/32” thick, 21/2” dia.
3/32” thick, 1.43” x 2.8”
5665
FR2-LANV-TAG
FR2-LAN-TAG
FR-ID-1 Gloss Finish
FRM-ID-1 Matte Finish
FR-BTN-250
5621
5628
*Images for illustration purposes only
Sublimatable Luggage/Sports Tags - FR Plastic
sublimatable LUGGAGE & SPORT TAGS, 2-Sided, 3/32”, 50 per case, Gloss White
5507
FR2-GLF
4” dia.
5654
FR2-DIA-LUG
31/2” x 31/2”
*straps sold separately (see page 22)
5897
FR2-MEG-LUG
2.67” x 4”
5993
5649
FR2-FTB
FR2-SQ-LUG
4”x 23/4”
*Image for illustration purposes only
6
31/2” x 31/2”
ASST.
FR2-REC-LUG
FR2-BRF-TAG
FR2-TAG
FR2-LUG
21/2” x 41/4”
13/4 x 3”
3” x 51/2”
23/4” x 4”
5655
5556
5505
5503
Sublimatable Badges - Metal
2-Tone Etched Brass Badges
11/2” x 3”
1" x 3"
111/16” x 29/16”
COLOUR
SIZE
GAUGE
PART NO.
Satin Gold
Satin Silver
1” x 3”
0.020”
BS25-77-RC
BS20-37-RC
Satin Gold
Satin Silver
11/2” x 3”
0.020”
BS25-77-RC15
BS20-37-RC15
Satin Gold
Satin Silver
111/16” x 29/16”
0.020”
BS25-77-OVL
BS20-37-OVL
• Available in Satin Gold or Satin Silver.
• Bright reveal edge border.
• Etched brass look.
white LaserSUB™ Steel Badges
11/2” x 3”
111/16” x 29/16”
1" x 3"
LSS15-200-RC15
COLOUR
SIZE
GAUGE
PART NO.
White
1” x 3”
0.015”
LSS15-200-RC13
White
11/2” x 3”
0.015”
LSS15-200-RC15
White
111/16” x 29/16”
0.015”
LSS15-200-OVL
LSS15-200-OVL
LSS15-200-RC13
• Specially prepared white sublimatable coating over gold-plated steel.
• Lasers to a bright gold finish.
• Perfect fusion of laser and sublimation processes.
Window Style Badge
2” x 3”
AS25-734-W23
Finish
Aluminum
White
AS25-200-W23
Satin Silver
AS25-354-W23
Satin Gold
AS25-734-W23
Brass
BS20-734-W23
• Includes adhesive backed plastic pocket, which holds replaceable
name plates
7
Sublimatable Badges - Metal
Sublimatable Aluminum
Satin Silver
Satin Gold
COLOUR
SIZE
GAUGE
PART NO.
White
Satin Silver
Satin Gold
1” x 3”
.025”
AS25-200-RC
AS25-354-RC
AS25-734-RC
White
Satin Silver
Satin Gold
7/8” x 23/4”
.025”
AS25-200-RC78
AS25-354-RC78
AS25-734-RC78
White
Satin Silver
Satin Gold
11/2” x 3”
.025”
AS25-200-RC15
AS25-354-RC15
AS25-734-RC15
UNISUB® Aluminum
• White aluminum, 1-sided.
• 3/16 rounded corners
PART NO.
UNISUB®
Part No.
SIZE
GAUGE
11/2” x 3”
.030”
AS30-200-125
5735
2” x 3”
.030”
AS30-200-230
5736
2” x 31/2”
.030”
AS30-200-CRR
5733
21/8” x 33/8”
.030”
AS30-200-218
5749
Sublimatable Brass
SIZE
GAUGE
1” x 3”
.020”
BS20-734-RC
7/8” x 23/4”
.020”
BS20-734-RC78
11/2” x 3”
.020”
BS20-734-RC15
Satin Gold
• Rounded corners
PART NO.
Badge Inserts
COLOUR
15/16” x 215/16”
Satin Gold Brass
White Aluminum
1/2” x 21/2”
Satin Gold Brass
11/16”
White Aluminum
Satin Gold Brass
White Aluminum
• Available in Satin Gold Brass and White Aluminum
8
SIZE
GAUGE
1/2” x 21/2”
.020”
5/16” x 215/16”
.020”
11/16 dia.
.020”
PART NO.
BS20-734-BF12
AS25-200-BF12
BS20-734-BF13
AS25-200-BF13
BS20-734-D16
AS25-200-D16
Badges
White
Badge Findings
Standard Pins
Pin & Clutch Back
900-028 1”
Plastic Backed
900-060 11/2”
Plastic Backed
900-061 11/2”
Adhesive Backed
Self-Locking Pins
900-001 11/2”
Plastic Backed
900-005
Plastic Backed
900-023S 11/2”
Square Corner Base
Adhesive Backed
Heavy Duty Swivel Clips
900-012
Swivel Plastic Backed
Snap Clips
900-006
Plastic Backed
900-019
Swivel Plastic Backed
Photo ID Clips
900-015 3/4”
Mini-Pocket Adaptor
Plastic Backed
900-016
Pin-Clip Adaptor
Ribbon Bars
900-007 1” x 11/4”
Pin-Pocket Clip Combo
(2pcs)
Pin on Disk
1/2” x 23/4”
1/2” x 31/2”
900-003 2”
Clear Plastic
900-003A 2”
Adhesive Back
Clutch
Ballou Clutch
900-006A
Adhesive Backed
Adaptors
900-014
Large Plastic Backed
900-013L
900-023P 11/2”
No adhesive backing
900-023 11/2”
Adhesive Backed
Bulldog Clips
900-048
900-048A
w/adhesive for partitions
900-013
900-009 2”
Serrated clutch bar for use
with fusing machine
Crimp Pins
900-002 11/2”
Adhesive Backed
Stick Pins
900-008 11/2”
Serrated pin for use with
fusing machine
900-039 3/4”
Plastic Backed
Badge Clips
Brass Clutch
Nickel Clutch
Tack and Clutch Set
CLIP-100 Clear
CLIP-200 White
900-3BL
900-003B
900-003C
900-004
9
*Clips available individually.
Badge Magnets
Features:
• Clothing friendly solution for attaching name badges. • Magnet can be used alone to securely hold to steel name badges.
Magnet/Steel
w/ adhesive
Sold in sets only.
900-751
1/2” x 13/4”
Magna Disc
900-7DK
5/8” dia.
900-7LT
Magna Clip
900-41S 9/16” x 13/8”
Magna-clip fitted plate only,
adhesive backed
For 900-40B magnet
900-410 9/16” x 13/8”
Magnet/Magna-clip set w/adhesive
(sold in multiples of 5)
Super Magnet Set
900-400
Super Magnet / Steel Set
9/16” x 13/8”
900-401
Ultimate Magnet
Magnets/Adhesive Set
(sold in multiples of 5)
1/2” x 13/4”
Magna Clip Set
Super Magnet
Magnets/Adhesive Set
(sold in multiples of 5)
Ultimate Magnet Set
900-500
Steel / Adhesive
Magna Mini
Magna Lite
Magna Badge
9/16” x 13/8”
Ultimate Magnet / Steel Set
1/2” x 15/8”
900-501
Steel / Adhesive
1/2” x 15/8”
Steel Plate
900-40S-O 9/16” x 13/8”
Steel Plate only
used with 900-40B or
900-50B magnets
900-40SA 9/16” x 13/8”
Steel/Adhesive Set
(sold in multiples of 5)
10
900-7MN
1/2” x 11/4”
Posi Grip Set
900-7PG 5/8” x 13/8”
Magnet/Lock-in Feature
w/adhesive Sold in sets only.
Super Magnet
900-40B 9/16” x 13/8”
Magnet only (sold individually)
Ultimate Magnet
900-50B 1/2” x 15/8”
Magnet only (sold individually)
Adhesive Strip
900-40A 7/16” x 13/8”
Adhesive only
(sold in multiples of 5)
Magnets
Magna
Magnetic Tape / Sheeting
Magnetic Tape
Magnetic Strips
• Peel and Stick.
• Premium Adhesive backing.
Size
Part No.
Thickness
1/2” x 100 ft. roll.
99M-050
1” x 100 ft. roll.
1/2” x 12” long
99M-050-F
1” x 12 ” long
Part No.
1” x 12” strips*
1/8”
BBMAG-12
Magnetic Sheeting
99M-010-F
Magnetic Biz-Cards
Thickness
*Kiss Cut to 1” x 1”
99M-010
1/16”
Size
(.032)
(.032)
• Magnetic sheeting sticks to metal.
• White face is great for vinyl lettering, or can be
screenprinted.
• Adhesive backed magnetic cards.
• Ready to peel and stick to the back of standard
business cards.
Size
Quantity/pkg
Part No.
2” x 31/2”
(100/pkg.)
999-BIZ
LASERmag®
Part No.
Type
Adhesive backed
24” x 50 ft. roll
12” x 24” sheet
White face
(non-adhesive)
24” x 50 ft. roll
9MS-124
9MS-024
9MS-124W
9MS-024W
(Laserable)
•
•
•
•
Magmates
Size
12” x 24” sheet
Laser
Engrave
Indoor
Use
Outdoor
Use
12” x 24” sheets, .020”
Create your own shapes, promotional Magnets, Vehicle Graphics, etc.
Brushed Yellow Gold/Black is not UV stable.
Not recommended for Rotary Engraving.
F
Front
Engrave
Colour
Brushed Silver/Black
Brushed Yellow Gold/Black
Gloss Black/Gold
Part No.
LMG63-S12
LMG64-S12
LMG65-S12
Size
12” x 24” Sheets
12” x 24” Sheets
12” x 24” Sheets
UV Stable
Yes
No
Yes
(Sublimatable)
Sheets
Size
12” x 24”
Business Cards
(.015”)
(100 /pkg.)
Colour
Part No.
Brushed Silver
SUB-MM63-S12
Brushed Silver
SUB-MM63-235
Brushed Gold
SUB-MM64-S12
Brushed Gold
SUB-MM64-235
Chrome
SUB-MM73-S12
Chrome
SUB-MM73-235
Brite Gold
SUB-MM74-S12
Brite Gold
SUB-MM74-235
• magMATES cannot be laser engraved.
11
Size
2” x 31/2”
Colour
• 10 cards / sheet, 10 sheets / pkg.
Part No.
Sold in pkg only.
Stainless Steel Tags
Stainless Steel Tags
ID-HRT
Heart
7/8” x 3/4” x 1/16”
• Not directly laserable. Must use Cerdec™ to mark with CO2 laser
• S-hooks, split rings and jump rings are sold separately
GI-SS
3/4” x 11/4” x 1/32”
999-032-D
GIL-SS
(Includes beaded 18” chain)
Circle
11/8” x 2 ” x 1/32”
13/8” dia. x 1/32”
(Includes beaded 24” chain)
999-032-DB
Dog bone
1” x 15/8” x 1/32”
ID-HEX
Hexagon
1” x 1” x 1/16”
Tag Accessories
ID-OE
7/16” x 13/4” x 1/16”
ID-CHN
ID-SRE
1/2” x 2 ” x 1/16”
(Bracelet for ID-OE &
ID-SRE, sold separately)
S-Hooks
Jump Rings
999-032-058 Nickel, 5/8"
Commercial Plates
JMP-025 Nickel, 1/4"
JMP-038 Nickel, 3/8"
SSU2-334-150
without holes
SSU2-334-150H 3/32” holes
11/8” x 25/8”
11/2” dia.
1/8” round corners
SSU2-334-D15H
5/32” hole
SSU2-334-13
without holes
SSU2-334-13H 3/32” holes
SSU2-334-OVLH
5/32” holes
SSU2-334-118H
5/32” holes
11/4” x 21/8”
SSU2-304-128H
.029”
SSU2-304-125H
3/16” round corners
1/8” holes
11/2” dia.
2” dia.
13/8” x 21/8”
1/4” round corners
11/4” x 3”
SSU2-304-D15H
1/8” hole
SSU2-334-D2H
5/32” hole
• CerMark™ laser marking products are used to provide a high contrast permanent mark on bare metal. CerMark™ in combination with the
power and speed of lasers will work on a variety of substrates. • Use the convenient aerosol can to spray onto metals, or use the paste
after mixing with denatured alcohol and brush on or use spray gun.
CerMark™ Metal Marking Compound
LMM-6000
CerMark™ Tape
* MSDS available
CER-TP1
1” x 50 ft. roll
CER TP15 1½” x 50 ft roll
CER-TP2
2” x 50 ft roll
CER-STR6
Accessories
CER-000 1 oz (25 gr)
CER-010 4 oz (100 gr)
CER-050 ½ lb jar (250 gr)
LMM-6038 Hi-Stick
CER-CAN
spray can, 12 oz
(covers up to 1100 sq. in)
CER-CAN-SM
Thermark® spray can, 6 oz
(used for polished surfaces with chromed finishes or stainless steel with a high polish)
CER-X-000
CER-X-050
2” x 6” strips
(sold in multiples of 2)
1 oz (25 gr)
½ lb jar (250 gr)
12
CER-MSK
CerMark™ mask
CER-KIT
CER-NZZ
CerMark™ kit,
Spare nozzle for
includes empty bottle
spray can
& polybrush
S.S. Tags
1” x 3”
3/16” round corners
SPL-010 Nickel, 1" dia.
Tumble Finish, Type 304 steel
Satin Finish, Type 430 steel
11/2” x 3”
Split Rings
Metal Tags - Rotary
G.I. Tags
I.D. Plate
• Chains are included with GI Tags.
• See page 12 for Stainless I.D. plates
gI-b-734
Satin Brass
IDG-714
G.P. Brass
gIl-b-734
Satin Brass
3/4” x 11/4”
IDLG-714
G.P. Brass
3/4” x 1 1/4”
1 1/8” x 2”
1 1/8” x 2”
Pet Tags
PT-SS7
Small stop sign
1” x 1 3/8”
1” x 1”
PT-LS7
Large stop sign
PT-DB7
Large dog bone
PT-SB7
Small dog bone
3/4” x 1”
7/16” x 1 7/16”
• Gold and Nickel plated Brass, engraves gold. • (10 / pkg.)
Gold Plated Brass
PT-HY7
Fire hydrant
id-sh-734
Satin Brass
1” x 1 1/2”
PT-HT7
Heart
PT-MS7
Mouse
1 1/8” x 1 1/8”
1 1/8” x 1”
PT-LC7
Cat silouette
PT-SD7
Medallion
7/8” dia.
PT-DH7
Dog house
1 1/8” x 1 1/2”
PT-SF7
Small cat face
5/8” x 3/4”
1 1/8” x 1 1/8”
PT-SD3
Medallion
PT-DH3
Dog house
PT-SF3
Small cat face
PT-CF3
Cat face
1 1/8” x 1 5/16”
PT-CF7
Cat face
1” x 1 1/4”
Nickel Plated Brass
PT-SB3
Small dog bone
PT-DB3
Large dog bone
3/4” x 1”
1” x 1 1/2”
7/8” dia.
Satin Gold Brass
1 1/8” x 1 1/2”
1” x 1 1/2”
PT-HT734
Heart
SIZE
FINISH
PART NO.
Jump Ring
1/4”
3/8”
Nickel
Nickel
JMP-025
JMP-038
3/8”
5/8”
3/4”
Brass
JMP-738
1”
1 1/8”
1 1/4”
2”
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
SPL-058
SPL-075
SPL-010
SPL-118
SPL-125
SPL-020
1”
Brass
SPL-710
5/8”
3/4”
7/8”
Nickel
Nickel
Nickel
999-032-058
999-032-075
999-032-078
5/8”
3/4”
Brass
Brass
999-032-758
999-032-775
1 1/8” x 1”
Split Ring
• Laser engravable, engraves with black letters.
PART NO.
DESCRIPTION
(100 / pkg.)
Alumamark Tags
SHAPE
SIZE
FINISH
(100 / pkg.)
ALM2-334-DB
1 1/16” x 1 5/8”
Satin
Silver
S-Hook
ALM2-734-DB
1 1/16” x 1 5/8”
Satin
Gold
1 1/8” x 1 1/8”
Tag Accessories
SHAPE
PTB-DB734
Large dog bone
5/8” x 3/4”
(100 / pkg.)
CLIP-100 Clear
13
CLIP-200 White
*Clips available individually
(see page 9)
Anodized Tags - Laser
354
Silver
500
Blue
562
Ice Blue
600 Red
662
Lt. Pink
400
Black
502
Dk. Blue
582
Purple
612 Dk.Orange
734
Gold
• Replace XXX with colour code from the chart.
• Some tags may require minimum of 50 pcs.
*
*
PTA-RIB-662
Cancer Ribbon 11/2”
Green
• S-hooks sold separately.
• Chains not included.
* Items are stock colours (other colours available)
*
PTA-SHM-932
Shamrock 11/8”
PTA-ANG-XXX
Angel 15/8”
932
*
PTA-HRT-600
Heart 1”
PTA-MSE-734
Mouse 11/8”
*
*
*
PTA-CST-600
Crest 11/8”
PTA-SHD-XXX
Shield 11/4”
PTA-STP-XXX
Stop Sign 11/8”
PTA-HRT-602
Heart 11/4”
PTA-TSH-XXX
T-Shirt 11/4”
PTA-CIR-XXX
Circle 11/4”
PTA-STR-XXX
Star 11/2”
PTA-BEL-XXX
Bell 11/8”
PTA-DEC-XXX
Decorative 11/4”
*
*
PTA-MSE-354
Mouse 11/4”
PTA-DGF-XXX
Dog Face 11/4”
G.I. Tags
*
PTA-PAW-40M
Dog Paw 1”
PTA-PAW-400
Dog Paw 11/4”
GIAA-354
Mini Tag
GIA-OBL-XXX
11/8” x 2”
11/8” x 2”
IDA-LCK-XXX
Locker Shoe Tag 2”
GIA-OBM-XXX
3/4” x 13/8”
GI Style Tags
IDA-SLD-XXX
Slider Shoe Tag 2”
Tags available:
LAS-TAG-BLK
LAS-TAG-BBL
LAS-TAG-BBS
LAS-TAG-BSK
LAS-TAG-CHR
LAS-TAG-FTB
LAS-TAG-GLF
LAS-TAG-HCK
LAS-TAG-SOC
LAS-TAG-STR
LAS-TAG-TEN
LAS-TAG-RUN
LAS-TAG-VLB
2”
LAS-TAG-BLK
Blank
PTA-HYD-XXX
Fire Hydrant 11/4”
Shoe Tags
.050”
*
PTA-DB-XXX
Dog Bone 11/4”
LAS-TAG-STR
Star
• Can be lasered on front and back.
• Chains not included.
• Can be lasered, burnished or scratch engraved.
14
Blank
Baseball
Softball
Basketball
Cheerleading
Football
Golf
Hockey
Soccer
Star
Tennis
Running
Volleyball
LAS-TAG-DIS Display Board
Anod. Tags
PTA-PIC-400
Guitar Pick 11/16”
Medallions
Laserable Flame Medals 21/4”
sport medals
Style
L as
Sport Medal Display Board
e ra
b le
!
Back of
medallion,
laserable
RIB-034
• Neck ribbons
sold separately
(see page 16)
Academic Medal Display Board
MED-FLMA-DIS Display Board (22 pcs)
Silver
Bronze
Baseball
MED-FMG-BBL
Gold
MED-FMS-BBL
MED-FMB-BBL
Basketball
MED-FMG-BSK
MED-FMS-BSK
MED-FMB-BSK
Bowling
MED-FMG-BWL
MED-FMS-BWL
MED-FMB-BWL
Golf
MED-FMG-GLF
MED-FMS-GLF
MED-FMB-GLF
Cross Country
MED-FMG-CRS
MED-FMS-CRS
MED-FMB-CRS
Football
MED-FMG-FTB
MED-FMS-FTB
MED-FMB-FTB
Karate
MED-FMG-KAR
MED-FMS-KAR
MED-FMB-KAR
Cheerleading
MED-FMG-CHR
MED-FMS-CHR
MED-FMB-CHR
Gymnastics
MED-FMG-GYM
MED-FMS-GYM
MED-FMB-GYM
Hockey
MED-FMG-HCK
MED-FMS-HCK
MED-FMB-HCK
Soccer
MED-FMG-SOC
MED-FMS-SOC
MED-FMB-SOC
Swimming
MED-FMG-SWM
MED-FMS-SWM
MED-FMB-SWM
Tennis
MED-FMG-TEN
MED-FMS-TEN
MED-FMB-TEN
Track
MED-FMG-TRK
MED-FMS-TRK
MED-FMB-TRK
Victory
MED-FMG-VIC
MED-FMS-VIC
MED-FMB-VIC
Volleyball
MED-FMG-VOL
MED-FMS-VOL
MED-FMB-VOL
Wrestling
MED-FMG-WRS
MED-FMS-WRS
MED-FMB-WRS
academic medals
MED-FLMS-DIS Display Board (19 pcs)
(Display Board - #MED-FLMS-DIS)
Style
(Display Board - #MED-FLMA-DIS)
Gold
Silver
Bronze
Art
MED-FMG-ART
MED-FMS-ART
MED-FMB-ART
Band
MED-FMG-BND
MED-FMS-BND
MED-FMB-BND
Chess
MED-FMG-CHS
MED-FMS-CHS
MED-FMB-CHS
Computer
MED-FMG-CMP
MED-FMS-CMP
MED-FMB-CMP
Drama
MED-FMG-DRM
MED-FMS-DRM
MED-FMB-DRM
Graduate
MED-FMG-GRD
MED-FMS-GRD
MED-FMB-GRD
Honour Roll
MED-FMG-HNR
MED-FMS-HNR
MED-FMB-HNR
Math
MED-FMG-MTH
MED-FMS-MTH
MED-FMB-MTH
Music
MED-FMG-MUS
MED-FMS-MUS
MED-FMB-MUS
Lamp of Knowledge
MED-FMG-LMP
MED-FMS-LMP
MED-FMB-LMP
Orchestra
MED-FMG-ORC
MED-FMS-ORC
MED-FMB-ORC
Participant
MED-FMG-PAR
MED-FMS-PAR
MED-FMB-PAR
Science
MED-FMG-SCI
MED-FMS-SCI
MED-FMB-SCI
Perfect Attendance
MED-FMG-ATT
MED-FMS-ATT
MED-FMB-ATT
Reading
MED-FMG-REA
MED-FMS-REA
MED-FMB-REA
Religious
MED-FMG-REL
MED-FMS-REL
MED-FMB-REL
Spelling
MED-FMG-SPE
MED-FMS-SPE
MED-FMB-SPE
Victory Cup
MED-FMG-VCC
MED-FMS-VCC
MED-FMB-VCC
Sportmanship
MED-FMG-SPT
MED-FMS-SPT
MED-FMB-SPT
Star Performer
MED-FMG-STR
MED-FMS-STR
MED-FMB-STR
15
Medallions/Ribbons/Shields
Medallions & Neck Ribbons
V-Stitched neck ribbons with ring and clip, 32”
1”
RIB-034
Red/White/Blue
RIB-600
Red
RIB-200
White
RIB-500
Blue
RIB-900
Green
MED-01-G Gold
MED-01-S Silver
MED-01-B Bronze
RIB-400
Black
2”
MED-106-B
Bronze
MED-106-G
Gold
MED-106-S
Silver
MED-905-G Gold
MED-905-S Silver
MED-905-B Bronze
MED-906-G Brt. Gold
MED-906-S Brt. Silver
MED-906-B Brt. Bronze
MED-VIC-G
Victory, Gold
Award Ribbons, 2” x 8”
RIB-001
1st Place
RIB-002
2nd Place
RIB-003
3rd Place
Aluminum Shields
Min.
order
Bright Silver 344 25 pcs.
Black
400
Min.
Blue
500
order
Red
600 50 pcs.
Brown
800
Bright Gold
RIB-004
4th Place
RIB-005
5th Place
RIB-006
6th Place
RIB-PAR
Participant
Diamond drag or diamond burnish. Gauge .025. Replace “XXX” with colour code:
704
SH4
SH10
SH8
SH7
**SH1
11/2” x 11/2”
SH9
A25-XXX-SH10
A25-XXX-SH8
11/2” x 11/2”
11/2” x 13/4”
1” x 13/4”
A25-XXX-SH7
A25-XXX-SH9
A25-XXX-SH11
**SH1 also available in sublimatable aluminum: Satin Gold (AS25-354-SH1), Satin Silver (AS25-734-SH1)
11/2” x 11/2”
A25-***-SH1
A25-XXX-SH4
SH11
11/4” x 11/2”
11/4” x 11/8”
All colours: minimum order 10pcs
OVL
11/2 x 3”
A25-XXX-OVL
OBL
113/16” x 37/8”
A25-XXX-OBL
SH24
SH22
SH23
51/2” x 5”
A25-XXX-SH23
SH29
SH25
A25-XXX-SH24
7” x 53/4”
A25-XXX-SH22
31/2” x 3”
SH30
SH28
91/4” x 71/2”
51/2” x 5”
A25-XXX-SH25
16
A25-XXX-SH28
SH31
71/2” x 53/4”
A25-XXX-SH30
61/4” x 5”
A25-XXX-SH29
61/2” x 43/4”
A25-XXX-SH31
Medallions
2”
2”
2”
2”
2”
Sublimatable Tags - Metal
luggage & sport tags
2-sided, straps sold separately
Luggage Tag
Size
Gauge
Slot
Brass
Satin Gold
Aluminum
White
Aluminum
Satin Silver
1 1/4” x 2 1/4”
1 1/2” x 3”
2 ” x 3 1/2”
2 ” x 3 1/2”
.040
.040
.020
.040
5/8”
1/2”
5/8”
5/8”
BB40-734-LUG1
BB40-734-LUG
BB20-734-LUG3
BB40-734-LUG3
AS40-200-LUG
AS40-354-LUG
AS40-200-LUG3
AS40-354-LUG3
1 5/8” x 3 1/2”
.040
3/8”
BB40-734-OVL
AS40-200-OVL
3 1/4” dia.
.020
1/2”
BB20-734-GLF
3 1/4” dia.
.040
1/2”
BB40-734-GLF
Oval Tag
Sport Bag Tag
ID tags
2-sided, split ring sold separately
Size
Gauge
Hole
Brass
Satin Gold
Aluminum
White
Aluminum
Satin Silver
1 1/8” x 2 ”
.040
3/16”
BB40-734-GIL
AS40-200-GIL
AS40-354-GIL
1 1/8” x 1 7/8”
.040
1/8”
BB40-734-OB-K
AS40-200-OB-K
AS40-354-OB-K
GI Tag
Oblong Tag
key tags
2-sided, split ring sold separately
Circle Key Tag
Heart Key Tag
Narrow Oblong Key Tag
Brass
Satin Gold
Aluminum
White
Aluminum
Satin Silver
Size
Gauge
Hole
1 1/2” dia.
.040
5/32”
2” dia.
.040
5/32”
BB40-734-CR-K
AS40-200-CR2-K
AS40-354-CR-K
1 3/8” x 1 3/8”
.040
1/8”
BB40-734-HT-KT
AS40-200-HT-K
AS40-354-HT-K
2” x 2”
.040
1/8”
BB40-734-HT-K
3/4” x 3”
.040
5/32”
BB20-734-OBL
1 3/8” x 2 1/2”
.040
1/8”
BB40-734-OV-K
AS40-200-OV-K
AS40-354-OV-K
1 3/8” x 2 1/2”
.040
5/32”
BB40-734-RT-K
AS40-200-RT-K
AS40-354-RT-K
1 3/4” x 1 3/4”
.040
1/8”
BB40-734-SQ-K
AS40-200-CR1-K
Oval Key Tag
Rectangle Key Tag
Square Key Tag
17
Sublimatable Tags - Metal
Pet tags
Gloss, 1-sided, 25 per case Triangular jump ring inc.
UNISUB® Aluminum
White
.045”
5771
5770
5773
5772
Part No.
AS30-200-HRT
AS30-200-DB
AS30-200-HYD
AS30-200-CIR
Size
1 1/4” x 1 3/8”
1 1/2” x 1”
1 1/8” x 1 1/4”
1 1/4” x 1 1/2”
G.I. tags
50 per case, chain sold separately
Chromaluxe®
UNISUB® Aluminum
White
5588
Silver 5949
5916
AS30-200-ID 1-Sided
AS45-200-OB-KT 2-Sided
AS45-300-ID
Size
1 1/8” x 2”
1 1/8” x 2”
1 1/8” x 2”
Gauge
.045”
.045”
.030”
OVAL tags
Aluminum, White
17/8" x 27/8”
1" x 2”
AS25-200-OB1
AS25-200-OV1
11/2" x 3”
.025” thick
Aluminum, Silver
AS25-354-OVL
Aluminum, Gold
AS25-734-OVL
Brass, Satin Gold
BS20-734-OB1
Aluminum LaserSub™, White
LSS15-200-OVL 11/16” x 2”, .015”
BS20-734-OV1
I.D. Tags
BUSINESS CARDS
UNISUB® Aluminum, 50 per case, .030”
Size
Corner
UNISUB #
Aluminum White
1” x 3”
SQ
5730
AS30-200-P13
1 1/2” x 3”
RC
5735
AS30-200-125
Aluminum, White
AS25-200-CRD, .025”
AS40-200-CRD, .040” 2-Sided
2” x 3”
RC
5736
AS30-200-230
UNISUB® Aluminum, White
AS30-200-CRR , 2” x 37/16” RC
2” x 3 1/2”
SQ
5748
AS30-200-CRS
2” x 3 7/16”
RC
5733
AS30-200-CRR
2 1/2” x 3 1/2”
SQ
5731
AS30-200-235
2 1/8” x 3 3/8”
SQ
5749
AS30-200-218
2” x 31/2”
18
LaserSub™ Steel, White
LSS15-200-CRD, .015”
Brass, Satin Gold Finish
BS20-734-CRD, .020”
BB20-734-CRD, .020” 2-Sided
Steel, Satin Gold Finish
AST-734-CRD .015”
Sub. Tags
Part No.
Luggage & Key Tags
Luggage Tags
Metal
Size
Gauge
Satin
Silver
Bright
Silver
Black
.025
A25-334-TAG
A25-344-TAG
A25-400-TAG
A25-714-TAG A25-754-TAG
.025
B25-334-TAG
B25-344-TAG
B20-400-TAG
B20-714-TAG B20-754-TAG BB20-734-LUG3
Aluminum
Brass
• See page 22 for luggage straps.
2” x 3 1/2”
.020
Bright
Rose Gold
Satin
Rose Gold
Satin
Yellow Gold
.040
BB40-734-LUG3
1 1/2” x 3”
.040
BB40-734-LUG
1 1/4” x 2 1/4”
.040
BB40-734-LUG1
.020
BB20-734-GLF
.040
BB40-734-GLF
.040
BB40-734-OVL
3 1/4” dia.
5/8” x 3 1/2”
sublimatable KEY TAGS, 2-Sided, 3/32”, 50 per case, Includes clear tab and split ring
5521
5520
5524
5525
5896
5766
FR2-CIR-KT
FR2-HRT-KT
FR2-SQ-KT
FR2-REC-KT
FR2-FTB-KT
FR2-MEG-KT
2 1/2” dia.
2 1/2” x 2 1/4”
2 1/4” x 2 1/4”
1 1/4” x 3”
1.875” x 3”
1.83” x 2.75”
*Images for illustration purposes only
CLIP-100 Clear
CLIP-200 White
Sublimatable Key Tags
Nickel Finish
*Aluminum Insert Included (see below)
*Clips available individually
(see page 9)
Pewter Finish
Key Tags
*Includes UniSub® Aluminum 1” diameter insert (see below)
UNISUB® Aluminum,
2-Sided, 50 per case
Keepsake Collection
5776
5777
5917
5778
SUB-KY-CIR
Insert .975"
Key Tag Inserts
UNI-PEW-DVC
Key Chain,
1 1/2” x 2 5/8”
1” x 11/2"
11/16"
AS25-200-BK12
BS20-734-D16
AS25-200-D16
BS20-734-D16
1 3/8” x 2 1/2”
1 1/4” x 3”
UNI-PEW-BTL
Bottle Opener,
BS - Satin Gold Brass
AS - White Aluminum
AS45-200-OV-KT
UNI-PEW-DIV
Golf Divot,
SUB-KY-OVL SUB-KY-REC
Insert 1"
Insert .8” x 1.1"
Replacement Insert
1/2” x 2 3/4”
UNISUB® Aluminum
5729
1” dia.
AS30-200-BTDV
5995
AS45-200-RT-KT
1 3/5” x 2 1/4”
19
Key Tags
Lacquered / Brass
BKT-B-OVL
1” insert
• Rotary Engrave or Diamond Drag
BKT-B-RCT
BKT-B-TMB
1” insert
SKT-TMB
1 1/2” x 1” insert
SKT-HRT
SKT-CIR
SKT-OVL
Key Tags - Lacquered
KY-JKS-SW KY-JN-01
Swivel Clips
KY-PAL
Key Pal
KY-TAP
Tape Measure
KY-REL
Key Reel
Sports Key Tags - Lacquered
SKT-BBL
KY-SOC
(1 3/4” in nickel)
SKT-RUN
skt-pin
skt-soc
SKT-Sce (enamal)
Laserable Key Tags
LKT-OVL
11/4” X 21/2”
Zodiac Key Tags
KY-Z-AQU
KY-Z-ARI
KY-Z-CAN
KY-Z-CAP
KY-Z-GEM
KY-Z-LEO
KY-BPR
Beeper Keeper
8”
KY-sqz
Squeeze Purse
skt-drt
skt-bwl
KY-BLT-400
Belt Loop
SKT-VBL
skt-bdm
skt-ftb
skt-hck
SKT-ONE
skt-glf
• Matte Black, Engraves to gold
LKT-CIR
11/2” dia.
LKT-OBL
LKT-TMB
3/4” X 23/4”
11/2” X 21/2”
World’s Greatest
ZODIAC KEYTAGS
Aquarius
KY-Z-LIB
Libra
Aries
KY-Z-PIS
Pisces
Cancer
KY-Z-SCO
Scorpio
Capricorn
KY-Z-SAG Sagittarius
Gemini
KY-Z-TAU
Taurus
Leo
KY-Z-VIR
Virgo
WORLD’S GREATEST KEYTAGS
KY-WG-MOM
KY-WG-DAD
KY-WG-GMA
KY-WG-GPA
KY-WG-ATH
KY-WG-DRV
KY-WG-FRD
20
Mom
Dad
Grandma
Grandpa
Athlete
Driver
Friend
Key Tags
PRT-010
Pull Apart
SKT-OBL
Accessories
I.D. Key Tags
KY-ID-PLA
200/Box
Clear I.D. Tags
7/8” x 21/4”
11/8” x 21/4”
KY-ID-CLR
11/8” x 21/4”
KY-ID-CLRL
KY-ID-CLRL-R
KY-LUG-400
KTG/A200
Key Caps, 200/box
KY-ID-STL
200/Box
Carabiners
KY-PHO
Clear, 2” x 3”
Magnetic Key Cases
KY-MAG-L
KY-CARB,
2”
KY-CARB-L, 3”
• 6 colours
• 2 styles
• 12 pcs/pkg
KY-MAG-S
(C-clip style available in individual colours: Special order min 100 pcs)
Coils
Super Wrist Coils
Standard Wrist Coils
KN-W27
12/pkg.
- Assorted colours
Super Coils 7” with metal trigger
KY-WRT-CRD
12/pkg.
- Assorted colours
Designer Coils 10” with plastic clip
KY-COIL
24/card
- Assorted colours
Klips
23/4”
KY-SPR-210 White
KY-KLIP
KY-SPR-410 Black
KY-KLIP-4 Black
21
White
Tag Accessories
Straps
straps
Leather
Colour
Size
Part No.
Tan
3/8” x 5”
STL-805
Black
3/8” x 5”
STL-405
White
3/8” x 5”
STL-205
Black
1/2” x 7”
straps
Colour
Size
Part No.
Brown
1/2” x 6”
STL-806
Black
6 3/4”
STP-407
White
6 3/4”
STP-207
Clear
6” long
STV-006
Leatherette
Plastic Strap
STL-407
BEADED CHAIN
Nickel Plated
Nickel Plated
Part No.
BEADED CHAIN
4” with connectors
CHA-040
Brass Plated
6” with connectors
Size
Part No.
4” with connectors
CHA-B40
CHA-060
6” with connectors.
CHA-B60
24” with connectors
CHA-024
30” with connectors
CHA-B30
30” with connectors
CHA-030
500 ft. Roll
CHA-00B
500 ft. Roll
CHA-000
Connectors 100/pkg.
CON-00B
Connectors 100/pkg.
CON-000
30” with connectors
CHA-B30-032
24” with connectors
CHA-024-032
500 ft. Roll
CHA-00B-032
Connectors 100/pkg.
CON-00B-032
1/8”
3/32”
Size
Accessories
Beaded Chains
30” with connectors
CHA-300-032
1/8”
Brass Plated
3/32”
Brass Plated
3/32”
Neck Cords / Lanyards / Chains
Gold Plated Chain - 24”
Neck Cords - 25”
NCK-200
NCK-400
NCK-500
NCK-600
CHA-724
Chain with Bulldog Clips
White
Black
Blue
Red
NCK-LC-230
NCK-LC-430
NCK-LC-530
NCK-LC-630
White
Black
Blue
Red
Neon Lanyard - 36”
Neck Cord, Swivel Clip - 30”
NCK-LS-230
NCK-LS-430
NCK-LS-530
NCK-LS-630
Neck Lanyard Clip - 30”
White
Black
Blue
Red
KY-LAN
24 cords per pkg. (4 colours)
Swivel Clip with Split Ring
22
Identification Plates - Rotary
Ornamental Plates
ornamentals
• All adhesive backed.
Bright Gold
(imitation screws)
Size
Oval
3/4” x 15/8”
3/4” x 17/8”
1” x 2 1/2”
900-079
7/8” x 2 1/2”
900-080
Bright Gold
(plain)
900-078
900-079P
900-081
900-080P
Rectangle
Notched Brass
Notched brass
Size
Hole Size
3/8” x 2”
* custom sizes available by special order
Gauge
Satin Yellow Gold
.020”
B20-734-200
Bright Rose Gold
3/8” x 2 1/2”
1/16”
.020”
B20-734-250
B20-714-250
1/2” x 3”
5/64”
.020”
B20-734-300
B20-714-300
3/4” x 3 1/2”
3/32”
.020”
B20-734-350
B20-714-350
3/4” x 4”
7/64”
.020”
B20-734-400
7/8” x 2 1/2”
.020”
BS20-734-ORN
1” x 2”
.020”
BS20-734-NT12
1” x 2 1/2”
.020”
BS20-734-NT1
Solid Brass
SOLID BRASS
Bevelled brass
Size
Gauge
Satin
Silver
Bright
Silver
Bright Rose
Gold
Satin Yellow
Gold
3/8” x 2 1/4”
.050”
M1-334
M1-344
M1-714
M1-734
1/2” x 2 3/8”
.050”
M2-334
M2-344
M2-714
M2-734
5/8” x 2 1/2”
.050”
M3-334
M3-344
M3-714
M3-734
3/4” x 3”
.050”
M4-334
M4-344
M4-714
M4-734
1” x 3”
.050”
M5-334
M5-714
M5-714
M5-734
Size
Gauge
Bright Rose Gold
Bright Silver
5/8” x 2 1/8”
.015
B15-714-218
B15-344-218
5/8” x 2 5/8”
.015
B15-714-258
B15-344-258
1” x 3”
.015
B15-714-300
B15-344-300
• Includes adhesive strip. (6/pkg.)
23
Identification Plates - Rotary
Oblongs
OBLONGS
Finish
Color
Aluminum
.025”
Brass
.020”
Satin Yellow Gold
A25-734-OB3
B20-734-OB3
Bright Rose Gold
A25-714-OB3
Bright Silver
A25-344-OBL
Bright Rose Gold
A25-714-OBL
B20-714-OBL
Brushed Rose Gold
A25-754-OBL
B20-754-OBL
Finish
Color
Aluminum
.025”
Brass
.020”
Satin Silver
A25-334-OVL
Bright Silver
A25-344-OVL
Black
A25-400-OVL
B20-400-OVL
Bright Rose Gold
A25-714-OVL
B20-714-OVL
Brushed Rose Gold
A25-754-OVL
B20-754-OVL
Bright Copper
A25-770-OVL
Brown
A25-800-OVL
Size
3/4” x 3”
1 3/4” x 3 3/4”
Ovals
ovals
Size
1 1/2” x 3”
Zipper pull
3/32 hole
2 1/2” x 4 3/8”
Satin Yellow Gold
B20-734-456
3/4” x 11/2”
Satin Yellow Gold
BB20-734-OVL
rotary
2” x 3 1/2”
Metal
Gauge
Bright Rose Gold
Aluminum
.025”
A25-714-CRD
Brass 2-Sided
laserable
2” x 3 1/2”
B20-714-CRD
Brass
.020”
Metal
Gauge
Satin
Anodized
Aluminum
.020”
(lasers to
silver)
.025”
Satin Yellow Gold
Brushed Rose Gold
BB20-734-CRD
B20-754-CRD
BB2-734-CRD
Matte Black
AA20-402-CRD2
24
Satin Blue
Satin Red
Satin Green
AA20-512-CRD2
AA20-612-CRD2
AA20-912-CRD2
I. D. Plates
Business Cards
Metal Disks & Plates
laserable metal disks
• Minimum 100 pcs per size and colour.
*Call our order desk for other sizes and colours
Laser
Aluminum
Size
Colour
AlumaMark™
1”
Black
Satin Silver
Satin Gold
AL20-400-D1
1 ¼”
Black
Satin Silver
Satin Gold
AL20-400-D125
1 ½”
Black
Satin Silver
Satin Gold
AL20-400-D150
2”
Black
Satin Silver
Satin Gold
AL20-400-D2
ALM2-334-D1
ALM2-734-D1
ALM2-334-D125
ALM2-734-D125
ALM2-334-D150
ALM2-734-D150
Laser Steel
Laser Brass
LS15-400-D1
LB16-400-D1
LaserFrost™
LS15-400-D125 LB16-400-D125
LS15-400-D150 LB16-400-D150
ALM2-334-D2
ALM2-734-D2
LS15-400-D2
LB16-400-D2
ALM2-334-D2
ALM2-734-D2
sublimatable metal disks
UNISUB®
Aluminum
Sublimation
Aluminum
AS30-200-D1
1”
White
Satin Gold
Satin Silver
Satin Bronze
AS25-200-D1
AS25-734-D1
AS25-354-D1
AS25-872-D1
AS30-200-D125
1 1/4”
White
Satin Gold
Satin Silver
Satin Bronze
AS25-200-D125
AS25-734-D125
AS25-354-D125
AS25-872-D125
AS30-200-D150
1 1/2”
White
Satin Gold
Satin Silver
Satin Bronze
AS25-200-D150
AS25-734-D150
AS25-354-D150
AS25-872-D150
AS30-200-D2
2”
White
Satin Gold
Satin Silver
Satin Bronze
AS25-200-D2
AS25-734-D2
AS25-354-D2
AS25-872-D2
Size
4 1/2”
Colour
Sublimation
Brass
LaserSUB™
Steel
BS20-734-D1
BS20-734-D125
BS20-734-D150
BS20-734-D2
LSS15-200-D2
AS30-200-D450
White
notched & Perpetual plates
Size
Colour
1” x 2 ½”
7/8” x 2 ½”
1” x 3 ¼”
1 ¼” x 2 ½”
1” x 2 1/2”
- no holes
7/8” x 2 1/2”
Gloss
Black
Aluminum
Brass
(lasers to silver)
(lasers to bright gold)
AL20-400-NT1
LB16-400-NT1
AL20-400-NT2
LB16-400-NT2
AL20-400-NT3
LB16-400-NT3
AL20-400-NT4
LB16-400-NT4
AlumaMark
Satin Silver
ALM2-334-NT1
Satin Gold
ALM2-734-NT1
Satin Silver
ALM2-334-080P
Satin Gold
ALM2-734-080P
25
Laserable Plates
Custom Cut Plates
To order custom cut shapes:
·· Specify material, plastic or metal, thickness, size and colour
·· Choose one of the following corner styles (from 3/32” up to 1”)
·· If holes are required, specify location and size
Square Corners
Radius Corners
1/8”, 1/4”, 3/8”, 1/2”
Notched Corners
1/8”, 1/4”, 3/8”, 1/2”
Hole
3/32”, 1/8”, 3/16”
Slot
1/8” x 9/16”
Scallop Corners
1/4”, 3/8”, 1/2”
Chamfer
1/4”, 3/8”
Laserable Metal Plates - Aluminum, brass, steel
Size
Colour
Aluminum
Brass
Steel
(lasers to silver)
(lasers to bright gold)
(lasers to bright gold)
1” x 2”
LB16-400-OV1
1 1/2” x 3”
1 7/8” x 2 7/8”
2” x 3”
AL20-400S-OVL
Gloss Black
LB16-400-OV2
LB16-400-OV23
2” x 3 1/2”
PPB600-BK23
2 1/2” x 4 1/4”
PPB600-BK24
1 1/2” x 3”
1 5/8” x 2 1/2”
LS15-400-RC15
Black with
Bright Gold
border .015”
LS15-400-OVL
Laserable Metal Plates - alumamark™, laser frost™
5/8” x 1 5/8”
3/4” x 1 7/8”
1” x 2 1/2”
Colour
Alumamark™
LaserFrost™
(lasers to black)
Satin Silver
ALM2-334-078P
Satin Gold
ALM2-734-078P
Satin Silver
ALM2-334-079P
Satin Gold
ALM2-734-079P
Satin Silver
ALM2-334-081P
Satin Gold
ALM2-734-081P
Silver .018”
LFS18-300-OVL
Gold .015”
LFB15-700-OVL
1 5/8” x 2 1/2”
• AlumaMark™ lasers to black.
• LaserFrost™ lasers to bright gold or satin silver.
• See page 27 for complete selection of AlumaMark™ and LaserFrost™ products.
26
Laser Plates
Size
AlumaMark™ & Laserfrost™
AlumaMark™ is one of the most innovative markable aluminum in the industry.
You can achieve rich black positive graphics when marking metal. Excellent
durability with resistance to chemicals, heat, abrasion and sunlight.
*Call our order desk for other sizes and colours
Alumamark™
Description
Size
Satin Silver
Satin Gold
1” dia.
ALM2-334-D1
ALM2-734-D1
11/4” dia.
ALM2-334-D125
ALM2-734-D125
11/2” dia.
ALM2-334-D150
ALM2-734-D150
2” dia.
ALM2-334-D2
ALM2-734-D2
5/8” x 15/8”
3/4” x 17/8”
1” x 21/2”
ALM2-334-078P
ALM2-734-078P
ALM2-334-079P
ALM2-734-079P
ALM2-334-081P
ALM2-734-081P
Dog Bone Tags
11/16” x 15/8”
ALM2-334-DB
ALM2-734-DB
Perpetual Plates
1” x 21/2”
ALM2-334-NT1
ALM2-734-NT1
Notched Plates
7/8” x 21/2”
ALM2-334-080P
ALM2-734-080P
Disk
Ovals
LaserFrost™ allows you to laser through a printed frosted background to bright
gold brass or satin silver steel creating the time honoured look of the “etched
and frosted” process.
Laser frost™
Description
Size
Silver - .018”
Gold - .015”
Sheet
12” x 24”
LFS8-300-Q1
LFB15-700-Q1
1” dia.
LFS18-300-D1
LFB15-700-D1
11/4” dia.
LFS18-300-D125
LFB15-700-D125
11/2” dia.
LFS18-300-D150
LFB15-700-D150
2” dia
LFS18-300-D2
LFB15-700-D2
Oval
111/16” x 29/16”
LFS18-300-OVL
LFB15-700-OVL
Business Card
2” x 31/2”
LFS18-300-CRD
LFB15-700-CRD
Name Plate
2” x 8”
LFS18-300-28
LFB15-700-28
Disk
27
Tapes & Adhesives
Engraving Table Tape
• HIGH-TACK (side is applied on the table).
• LOW-TACK (side holds the plate)
• Re-usable, eliminates clamps or jigs.
Size
Length
Part No.
1/2”
3/4”
x 55 meters
99E-050
x 66 meters
99E-075
Foam Grip Tape
994-062
• Conforms well to uneven surfaces.
• Good resistance to water, detergents,
alcohol & cleaners.
• Acrylic based adhesive.
Length
1/32”
1/16”
1/2” x 66 meters
1”
99F-010
x 66 meters
1/2” x 33 meters
99F-650
1”
x 33 meters
99F-610
1”
x 50 yards
99F-610-L
99T-075
2”
99T-200
1/2”
1”
1”
x 33 meters
994-062
11/2”
Length
Color
Part No.
1/2”
x 72 yards
Clear
SUB-HT2-CLR
Part No.
SUB-99HT9
1/2”
3/4”
Length
1”
99P-010
3MTM Adhesive Transfer
12”
24”
12”
12”
x
x
x
x
Size
24”
36”
180 yard
180 yard
Type
Sheets
Roll
2”
99A-468
Tape Dispensers
99S-150
Part No.
DSP-030
Holds 3 Rolls
DSP-020
Holds 2 Rolls
DSP-010
Holds 1 Roll
*Items may not be exactly as shown.
Heat Tape
• Double-sided.
• Immediate bond is formed
at an adhesive temperature
of 250o F.
• Holds Hot Stamping dies.
CER-STR6
CER-TP1
Strip
CER-TP15
x 50ft. roll
CER-TP2
31/2”
CER-TP35*
* By special order.
28
99A-467-S36
99S-010
• Laser marking tape
designed for use on glass,
ceramic, ceramic-like and
porcelain substrates.
• High contrast, permanent
marks on uncoated metal
or glass.
Length
Part No.
99A-467-S12
99A-467
99S-200
(LMM6018)
11/2”
99P-075
x 33 meters
CerMark™ Tape
Size
2” x 6”
1”
Part No.
99P-050
Size
1”
Length
Part No.
x 55 meters
20H-010
Tapes & Adh.
• Holds sublimated image
to the product while being
sublimated in the heat
press. • 2 mil thickness.
2”
Size
• Long-lasting adhesive provides a solid,
permanent bond.
• Adhesive layer is protected by a coated
liner to allow easy release.
99S-050
x 55 meters
• Economical paper lined, suitable for
general applications.
• Rubber based adhesive.
99T-010-36
Part No.
1/2”
1”
Size
Length
Double-Sided Tape
99T-050-36
x 33 meters
• Easy-tear, acrylic adhesive with a
crepe liner.
994-032
x 72 yards Green
x 55 meters
99T-150
x 66 meters
• Holds sublimated image
to the product while
being sublimated in the
heat press.
1/2”
99T-050
11/2”
1”
Color
99T-025
99T-038
99T-010
Part No.
Length
Part No.
1”
Length
Sublimation Tape
Size
1/4”
3/8”
1/2”
3/4”
Length
Size
super foam tape
1/32”
1/16”
Size
Part No.
99F-050
Thickness
• High performance tape. • Our #1 seller.
• Long lasting, all-weather acrylic adhesive
holds up in extreme cold, heat and humidity.
Maxi-Stik Tape
Foam Grip tape
Thickness
Double-sided Supertuff
Tape
Adhesives & Fasteners
Pre-mask Tape
Size
11/4”
21/4”
31/4”
41/4”
6”
12”
Length
Roland ® AS-10 Adhesive Sheets
Part No.
9PR-MASK-1
• Roland ® AS-10 hold-down
sheets are designed to
adhere flat engraving
material to the surface of
any engraving machine.
• These sticky mats are
similar to a sheet of
double sided tape.
• Each sheet can be used
several times over.
9PR-MASK-2
x 100 yds
9PR-MASK-3
9PR-MASK-4
9PR-MASK-6
• 10 sheets/pkg.
9PR-MASK-12
• Ultra high grade paper with high tack adhesive.
• Includes superior release liner adhesion to prevent wrinkling, curling, edge lifting.
• Protects engraving when cutting out shapes.
• Assists with decreasing the effects of the laser burn.
Size
8” x 6”
Part No.
ROL-AS-10
Magic Peel™
With one swipe, Magic Peel™
lifts an edge of protective
plastic allowing you to easily
grab the plastic and pull it off.
MSK-PEEL
Cesco Bond
Adhesive Spray
Size
Part No.
17 oz. can/695ml.
MM-77
• High tack, multi-purpose.
• Resists water and humidity.
Size
Part No.
17 oz. can/695ml.
NS-57
Dual LockTM Fastener
• Mates to itself.
• Allows for quick removal of signage.
• Adhesive backed.
• Used with Designer Frames.
Type
Dense + Light
1/2” x 12”
Part No.
(2 pc. set.)
99D-512
Light
99D-170L
Dense
99D-400D
Adhesive Remover
• Fuses plastic backed hardware to
badge blank.
• Multi-purpose with high
coverage and high tack.
• Bonds lightweight materials,
metals, foam, glass etc.
Size
• Works on most materials covered with protective
plastic masking such as aluminum, brass,
engravable plastic and plexiglass.
• Magic Peel™ won’t scratch or scuff highly
polished surfaces.
Size
Part No.
17.6 oz/500 ml. can 900-011
Applicator*
900-010
* Plastic squeeze bottle.
• Eliminates overflow problems
& evaporation.
Scotch Grip Adhesive
• Strong and lasting.
• Bonds plastic to metal
or plastic to plastic.
Size
5 oz./147 ml.
Part No.
900-030
Velcro (Hook and Loop)
• Removes most types of
glue and adhesives left
by decals, tapes and
graphics.
• Simply spray and leave
on for 60 seconds (no
more than 120) then
lightly scrap off glue
residue.
• Rinse area with water.
• Use in well ventilated
area.
Size
1 Quart
Part No.
99A-REM
*Includes Spray Nozzle
Felt Pads
• Prevents scratching on desks & walls.
• For use on Trophy Plaques &
wooden bases.
• White Nylon, Adhesive back.
• “Hook” is used for signage for office partitions.
Size
1”
Length
x 75 ft. roll
x 12” Strip
Type
Part No.
Hook
Loop
Hook
Loop
99H-000
99L-000
99H-012
99L-012
29
Size
Part No.
3/8” dia. (100 / sheet)
FLT-038
• Adhesive backed.
• Clear bumps. Great for acrylic,
glass or crystal awards.
Size
Part No.
3/8” dia. (225 / sheet)
FLT-CLR
Packaging Materials
Tapes
Masking Tape
Filament Tape
Carton Sealing Tape
• Great for use as strapping.
• Extra tough.
Size
Length
Part No.
1/2”
3/4”
x 55 meters
MSK-050
Size
Length
Part No.
x 66 meters
MSK-075
3/4”
x 55 meters
FIL-075
Bags
Size
Length
2”
x 66 meters
Part No.
Tan
CTN-T21
Clear
CTN-C20
Plaque Packaging
Presentation Boxes
Jiffy Bags
• Boxes hold plaques up
to 7/8” thick
• Clear poly window
provides maximum
protection and visibility
• Bubble Mailing Envelope
(Self Seal)
Size
6” x 9” (inside)
Colour
Length
Part No.
x 55 meters
JIF-000
Plaque Pouches (foam)
Poly Bags
• 1/8” thick
• Premium quality
• Protects plaques
• Made from durable 2 mil plastic
• Sold 100 per package
Size
Part No.
BGS-220
2” x 3”
BGS-230
3” x 4”
BGS-340
3” x 5”
BGS-350
4” x 6”
BGS-460
6” x 6”
BGS-606
6” x 8”
BGS-608
7” x 10”
BGS-710
9” x 12”
BGS-912
10” x 13”
BGS-113
13” x 18”
BGS-1318
15” x 20”
BGS-1520
Plaque size
4” x 6” and 5” x 7”
6” x 8”
7” x 9”
8” x 10”
9” x 12”
101/2” x 13”
12” x 15”
Pouch size
6” x 8”
7” x 9”
8” x 10”
9” x 11”
10” x 13”
111/2” x 14”
13” x 17”
Part No.
POU-057
POU-068
POU-079
POU-810
POU-912
POU-113
POU-125
Nails
Nails (100/pack)
NLS-738 Gold 3/8”
NLS-750 Gold 1/2”
NLS-338 Silver 3/8”
NLS-350 Silver 1/2”
30
Domed Nail (100/pack)
NLS-DOM Gold 7/16”
Screws - Phillips (100/pack)
SCP-025 Gold 1/4” x 1/16”
SCP-038 Gold 3/8” x 3/32”
Tapes & Adh.
2” x 2”
Multi-Mat™ & LaserTape™
Multi-Mat™
• Multi-Mat Plus™ is a silicone-like product
used to hold down thin materials, as well as
items with “peel-and-stick” adhesive backing
applied. Tape will not normally hold down
these items.
• Multi-Mat Plus™ will last for many years
under normal use. The permanently tack
surface renews itself when wiped off with a
bit of soap and warm water.
• If you engrave thin materials or laser foils,
Multi-Mat Plus™ will hold the material flat
and in focus.
Laser table with Multi-Mat™
Size
Part No.
6” x 12”
TKM2-612
9” x 12”
TKM2-912
12” x 12”
TKM2-122
12” x 24”
TKM2-124
Laser table without Multi-Mat™
SEKLEMA™ Mat
• SEKLEMA™ is a 2-sided material
designed to hold materials on your
engraving table without the use of
tape or jigs.
• 2-sided
• 2-sided
Part No.
TKM2-C122
TKM2-C124
Sizes
12” x 12”
12” x 24”
Description
Seklema™ Mat,
Clear greaseless surface
Seklema™ Mat,
Clear greaseless surface
• SEKLEMA™ works with both metal
and plastic, as well as many other
materials designed for engraving.
• SEKLEMA™ is re-usable, non-stick
material that can be easily cleaned
with only a soft sponge and water.
Photo Brasive LaserTape™
PhotoBrasive®
S Y S T E M S
Size
Description
LAS-TAP-625
6” x 25’
4” x 100’
Laser Tape
LaserTape™
•No PVC!
•Quick burn
•Available in 4 mil
LAS-TAP-400
LAS-TAP-600
6” x 100’
4” x 6’’
Part No.
Strips
LAS-TAP-406
PhotoBrasive® LaserTape™ is a sandblastable laser mask, designed to create stencils for the high end corporate, promotional
products and giftware industries. Simply Apply-Laser-Blast!
LaserTape™ allows you to use a laser engraver machine in
correlation with a sandblast machine to create low-cost stencils.
LaserTape™ conforms beautifully to surfaces without wrinkling,
burns clean and peels easily making for an effortless removal.
Sandblastable Laser Mask
•Fast & simple clean up - peels off easily
•Easy to colourfill after sandblasting
•Conforms smoothly to surfaces without wrinkling
31
Apply
Laser
Blast!
Cleaners/Polishers/Masking
LAZRCLEAN™
LAZRCLEAN™ is 100% natural,
biodegradable, all-purpose waterbased cleaning solution, made with
soy and corn.
Does not contain any solvents,
kerosene, phosphates, or any other
harmful toxins.
LAZRCLEAN™ is ideal for cleaning
materials after engraving-residue
left on wood, rubber, sticky film left
on plastic, acrylics and metal
products.
*Concentrate sold as part of kit only.
LAS-CLN-BTL
LAS-CLN-BTL3
LAS-CLN-KIT
PREMIXED with water,
16 oz spray bottle
(ready to use)
PREMIXED with water,
32 oz spray bottle
(ready to use)
Kit includes concentrate* & empty spray
bottle. Concentrate yields eight 16 oz
bottles of LAZRCLEAN™.
NOVUS™ Acrylic Polisher
Part No.
LAS-ACR-CLN
Size
Description
LAS-ACR-POL
8 oz.
LAS-ACR-SCR
8 oz.
Gently cleans all plastics without
scratching. Leaves a lustrous shine
that resists fogging, repels dust, and
eliminates static.
8 oz.
Removes fine scratches, haziness and
abrasions from most plastics. With
repeated use, NOVUS No. 2 restores
faded and discolored plastics.
Removes heavy scratches and abrasions
from most acrylic surfaces. Use when
damage is too severe to be restored with
NOVUS No. 2 polish.
LiquaMASK™
LiquaMask™ works with: glass, acrylic, leather, coated metal, marble & granite, engraving plastic, clear coated wood & other materials.
LiquaMASK™ applies as a liquid and
quickly dries to create a durable
mask. LiquaMASK™ is laser-safe,
non hazardous and non-toxic.
Ideal for a variety of laser processes
including colour filling, light sandblasting and deep engraving.
Part No.
LAS-MSK-PNT
LAS-MSK-QRT
LAS-MSK-GAL
Size
1 pint - 16 oz
1 quart - 32 oz
1 gallon- 4 quarts
Coverage
approx. 2000 sq. in
approx. 4000 sq. in
approx. 16000 sq. in
32
Cleaners
The mask will protect the top
surface of the substrate to prevent
smoke damage or scorching from
the engraving or cutting process.
Lubricants / Oxidants
Lubricants
Green Engravers Lube
Super Lube
• Multi-Purpose Synthetic Lubricant with Syncolon (PTFE).
• Prevents friction and wear.
• Cleans and penetrates, then evaporates, leaving a
long-lasting film of lubricant.
• Lasts 4 times longer than petroleum based lubricants.
• Reduces maintenance and service requirements.
• Withstands temperature: -450F to 4500F/-400C to 2320C.
• Recommended for XenetechTM Engraving Machines.
Size
Part No.
11 oz. (311g) Aerosol Can
LUB-000
25 oz. 7ml Tube
LUB-TBE
•
•
•
•
Lubrication for rotary engraving on metals.
Extends cutter life.
Non-oily cutter coolant.
Washes with water.
Size
Part No.
4 oz.
909-000
Oxidants
Aluminum Oxidant
Tri-Flow ®
•
Blackens engraved letters.
Brass Oxidant
• Superior lubrication contains TeflonTM.
• Penetrates and protects without gumming up.
• Can be used on both manual and computerize
machines.
• Lubricates Equipment: rails and leak screws.
• Petroleum-based.
Size
Part No.
12 oz. can
TRI-100
Size
Part No.
Size
Part No.
4 oz.
901-000
4 oz.
902-000
Engraver’s Enamel Paint
• For filling front or reverse engraved letters in metal and plastic.
• Enamel dries rapidly and gives a high-gloss finish.
Colour
White
Grey
Black
Light Blue
Navy Blue
Purple
Fire Red
Part No.
EN
EN
EN
EN
EN
EN
EN
-
200
312
400
500
552
582
600
Colour
Part No.
EN
EN
EN
EN
EN
EN
EN
Bright Red
Orange
Metallic Gold
Primrose Yellow
Medium Green
Pine Green
Emerald Green
-
604
612
700
704
900
912
932
Paint Brushes
EN-GB178-1
• Natural tips cupped to needle sharp point for fine characters.
EN-LB95-1
• Extra fine quality, brown squirrel hair quills set to a thin straight even edge.
Valve Action Paint
Lacquer-Stiks
• Marks with real paint, dries in 3 minutes.
• Nib releases paint as needed for continuous marking.
• Marks on all surfaces including: metal, wood, glass,
plastic, rubber, cardboard, and paper.
• Lead-free, low halogens.
• Marking range: -50°F to 150°F (-46°C to 66°C)
• The fiber nib is replaceable.
• Quick and easy way to add colour to engraved letters on
metals, wood, plastic or ceramic.
• Rub-in paint. Wipes off easily.
• Lacquer-Stik is permanent. Will not smear or rub off.
• Withstands temperatures as high as 500oF.
Colour
Part No.
White
Black
Red
Gold
900-029-200
900-029-400
900-029-600
900-029-700
Colour
Black
Blue
Green
Replacement Nibs
33
Part No.
900-029-BLK
900-029-BLU
900-029-GRN
900-029-TPS
Paint
PaintPlus™ paints are acrylic non-toxic paints ideal for sign-making applications enhanced with custom colour
matching. The smooth, rich colours provide excellent coverage and are self-sealing.
Primary Paints
Colour
Name
2 fl oz Jar
8 fl oz Jar
Red
PNT-R601-2
PNT-R601-8
PaintPlus™ Primary 2 fl oz Kit:
Yellow
PNT-R701-2
PNT-R701-8
Orange
PNT-R651-2
PNT-R651-8
Light Blue
PNT-R562-2
PNT-R562-8
PNT-RKIT-2 contains:
• Twelve 2 fl oz jars of PaintPlus™
Primary Paint colours
• Two 1” foam applicators
Blue
PNT-R501-2
PNT-R501-8
Purple
PNT-R582-2
PNT-R582-8
Ocean Blue
PNT-R592-2
PNT-R592-8
Pine Green
PNT-R902-2
PNT-R902-8
Bright White
PNT-R204-2
PNT-R204-8
Black
PNT-R401-2
PNT-R401-8
Silver
PNT-R304-2
PNT-R304-8
Gold
PNT-R771-2
PNT-R771-8
Safety Paints
Colour
Name
PaintPlus™ Primary 8 fl oz Kit:
PNT-RKIT-8 contains:
• Twelve 8 fl oz jars of PaintPlus™
Primary Paint colours
• Two 1” and two 3” foam applicators
PaintPlus Safety 2 fl oz Kit:
2 fl oz Jar
8 fl oz Jar
Safety Red
PNT-RS601-2
PNT-RS601-8
Safety Yellow
PNT-RS701-2
PNT-RS701-8
Safety Orange
PNT-RS651-2
PNT-RS651-8
Safety Blue
PNT-RS501-2
PNT-RS501-8
Safety Purple
PNT-RS582-2
PNT-RS582-8
Safety Green
PNT-RS901-2
PNT-RS901-8
PNT-RSKIT-2 contains:
• Six 2 fl oz jars of PaintPlus™
Safety Paint colours
• 1” foam applicator
PaintPlus Safety 8 fl oz Kit:
PNT-RSKIT-8 contains:
• Six 8 fl oz jars of PaintPlus™
Safety Paint colours
• 1” and 3” foam applicators
Acryfil Paint
Rub ‘n Buff®
• Acryfil is a specialized formula of polymer
acrylic developed especially for use with
reverse engravable materials
• Paints can be mixed to create custom colours
• Primary kit colours are available individually
• Kits include poly brush
KIT 2
Designer Kit
Black
A1 Pumice
A30
White
A2 Pewter
A31
Red
A3 Grey
A33
Blue
A4 Wedgewood A36
Green
A5 Slate
A37
Yellow
A6 Jade
A40
Brown
A7 Teal
A42
Gold
A92 Dusty Mauve A45
Silver
A93 Plum
A47
KIT 3 - Combo Kit
Combination of Kit 1 and Kit 2
34
• 1/2 oz (15ml) tube
• Rub ‘n Buff is a wax
base metallic finish
Colour
Part No.
Sapphire Blue
Black
Gold Leaf
Green
Purple
Red
Ruby
Silver Leaf
Antique White
RUB-BLUE
RUB-BLACK
RUB-GOLD
RUB-GREEN
RUB-PURP
RUB-RED
RUB-RUBY
RUB-SILV
RUB-WHT
Paints
POL-000
Poly Brush
KIT 1
Primary Kit
Legend Plates
Plastic
• 3 ply plates, can be engraved on both sid
• Flexible engraving stock, shatterproof
Colour
• For push buttons, switches and pilot or indicator lights
• Fit most manufacturer’s equipment
Part #
Colour
Part #
Colour
Part #
2-7/16”
2-7/16”
2-1/4”
White
Black
Red
FS100
FS101
FS103
White
Black
Red
X99-2
X99-1
X99-3
White
MS-100
White
Black
Red
FS200
FS201
FS203
White
Black
Red
X99-T2
X99-T1
X99-T3
White
Red
FS278
FS278-3
White
Red
FS250
FS253
White
Black
Red
FX99-2
FX99-1
FX99-3
White
Black
Red
X60-2
X60-1
X60-3
White
Black
Red
FS300
FS301
FS303
White
Black
Red
FX100-2
FX100-1
FX100-3
White
Black
Red
KT88-2
KT88-1
KT88-3
White
Black
Red
FS400
FS401
FS403
White
Black
Red
X100-2
X100-1
X100-3
White
Black
Red
FX77-2
FX77-1
FX77-3
Metal
• Anodized aluminum plates
• For push buttons, switches and pilot or indicator lights
2-7/16”
1-3/4”
1-3/4”
1”
2-7/16”
1-7/8”
2-7/16”
1-7/32”
7/8”
7/16”
1-7/32”
Grey
Red
FS250-AB
FS250-RAB
Grey
Red
35
FS200-AB
FS200-RAB
1-7/32”
Grey
Red
FS100-AB
FS100-RAB
Auxiliary Equipment
Metal & Plastic Shears
• Upper curved power blades for metal
• Metal Shear capacity: Aluminum .040”
Brass
Steel
.025”
.015”
Description
• Twin Lexan safety shields
• Long handle for maximum shear power
• Size: 26”L x 14”W x 11”H
• Weight: approx. 35 lbs.
Metal Shear Plastic Shear
Shear with 12” Blade
SHR-M12-AC
SHR-P12-AC
Upper metal replacement blade
SHR-M12-UMA
SHR-P12-UMP
Your shear blade re-sharpened
SHR-MC-999
SHR-999
Corner Rounders - Cornermate Series®
Standard Cornermate® Base
CRN-000 Base
• Standard table
• Size: 10”L x 6.5”W x 6”H
• Weight: approx. 6 lbs. (with cutting unit)
Die
• Capacity: Aluminum .040” (hole punch capacity .025”)
Brass .025” (hole punch capacity .020”)
Steel .015”
Flexible Plastic .063”
Radius die
• Corners without burrs or distortions
(See chart for part # for dies)
• Dies sold separately
• Standard Cornermate ® & EZ-Cornermate ® share the same die sizes
Die
Radius
Notched
DIE-018R
DIE-018N
Scallop
Chamfer
Hole
Slot*
EZ-Cornermate® Rounder Base
New
DIE-032HP
3/32”
LESS T
R
EFFO
CRN-M40 Base
1/8”
DIE-018HP
3/16”
DIE-316R
DIE-316N
1/4”
DIE-025R
DIE-025N
DIE-025S
DIE-025C
DIE-038C
DIE-316HP
5/16”
DIE-516R
3/8”
DIE-038R
DIE-038N
DIE-038S
1/2”
DIE-050R
DIE-050N
DIE-050S
3/4”
DIE-075R
DIE-075N
1”
DIE-100R
DIE-100N
*Slot measures: 1/4” x 9/16”
• Size: 10”L x 6.5”W x 8.5”H
• Weight: approx. 6.5 lbs. (with cutting unit)
• EZ-Cornermate ® is half the effort of the standard table
• Heavy duty aluminum work table with tool steel-hardened punch and die shapes
Heavy Duty Cornermate PLUS® Rounder Base
New
• Cornermate Plus® has a wider opening for flexible plastics up to .350”
• Features a controlled action roller that moves up and down like a press
• Cornermate Plus® die sizes listed in chart below
• Capacity: Aluminum .063”
Brass .030”
Steel .020”
Flexible Plastic .350”
• Size: 10”L x 6.5”W x 9”H
• Weight: approx. 7.5 lbs. (with cutting unit)
• Dies sold separately, see chart
CRN-060 Base
Die
Radius
Slot*
Die
DIE-SLT2
1/4”
1/2”
DIE-12R
3/4”
DIE-34R
1”
DIE-10R
*Slot measures: 1/4” x 9/16”
36
Radius die
Aux. Equip.
Y
HEAV Y
DUT
DIE-SLT
Button Machines
Machine 150
• Makes 2 1/4” inch buttons only
• The Machine 150 frame is made of military-grade composite material
• Average production: 1 button every 24 seconds/150 buttons per hour
Die Size
Part No.
21/4”
BM150
Machine 250
Includes
•
•
•
•
•
•
Handi Circle Cutter and glass plate
CDROM with instructions, templates, and tutorials (PC format)
Button components to make 250 complete buttons
Lifetime Warranty
Size 4 x 10 x 8 inches high
Weight: 11 lbs
• Capable of making regular pinback buttons, bottle openers, magnet buttons,
keychain buttons, and mirror buttons
• Exclusive short handle stroke requires very little force to make a button
Die Size
1”
Part No.
BM2-D1
11/4”
BM2-D125
11/2”
BM2-D150
13/4”
BM2-D175
21/4”
BM2-D225
3”
Quick Punch Cutter
BM2-D3
1”
11/4”
11/2”
• These come with a Quick Punch
• CDROM of templates
• Lifetime Warranty
• These come with a Handi Circle Cutter
• CDROM of templates
• Lifetime Warranty
Handi Circle Cutter
• Will adjust to cut circles from 11/4” to 71/4” in diameter, and comes
with easy to follow illustrated instructions.
• The Handi Circle Cutter and plate is included with each Machine
150 and select Machine 250 models (see chart above).
• The Quick Punch circle cutter is a fast and simple way to cut
out your artwork for your buttons.
• 3 sizes available: 1”, 1-1/4”, 1-1/2”.
• Included with select Machine 250 models (see chart above).
Die Size
Includes
Part No.
BM-QP1
BM-QP125
BM-QP150
37
Die Size
Part No.
11/4” to 71/4” dia.
BBCUT
Replacement blades (12 /pack)
BBCUT-BLD12
Button Components
3” Circle Punch
Super Punch
• Punch out your own dies in the colour and
quantity you need.
• Interchangeable dies. Available in 1”, 1-1/2”, and 2” sizes.
• Both punch and die are made with
hardened tool steel providing many years of use.
• Easy to operate and portable.
• Dimensions: 6” x 6” x 25”
• Weight: 26 lbs.
Size
Punch with Die
Die only
1”
BBPUNCH-1
BBDIE-1
1-1/2”
BBPUNCH-15
BBDIE-15
2”
BBPUNCH-2
BBDIE-2
Round Button Sets
Plastic Cover
(also called Mylar)
Size
Shell
Collet Sets
Size
1”
1-1/4”
1-1/2”
1-3/4”
2-1/4”
(min. 500)
Size
• Shells
• Mylar
• Backs with
Part No.
(min. 125)
Size
Part No.
• Shells
BBMAG-225
• Collets
• Mirrors
• Mirror Shims
2-1/2”
BBMAG-25
•
•
•
•
3”
BBMIR-3
Includes
1” x 12”
BBMAG-12
• Magnet Strip
Shells
Mylar
Plain Books
Magnet
Magnet Strip 1”x12 Ft., 1/8” thick (Kiss Cut to 1”x1”)
Keychain Sets (min. 125)
Bulldog Clip Sets (min. 125)
Includes
•
•
•
•
Shells
Mylar
Collets
Spring Lock Pins
Size
Part No.
2-1/4”
BBKEY-225
2-1/2”
BBKEY-3
(min. 500)
Size
2”
Part No.
BBUT-2
Includes
Back with Pin inserted
• Shells • Mylar
• Back with Pins inserted
38
•
•
•
•
Includes
Size
Shells
Back
Mylar
Keychains
Part No.
Includes
2-1/4” BULLDG-225 • Shells
• Mylar
2-1/2” BULLDB-25 • Backs w/ Bulldog Clip
Badge-a-Minit Button Sets (min. 500)
Size
1-1/4”
2-3/8”
3”
Part No.
BBM-125
BBM-238*
BBM-3
Includes
• Shells
• Mylar
• Backs w/ Pins inserted
* The 2-3/8” size is also called 2-1/4” size.
Button Mach.
2” Award Button Sets
Shell
Magnets Sets
BBDIE-3
2-1/4”
Includes
2-1/4” BBMIR-225 • Mylar
Pins inserted
Part No.
Plastic Cover
(also called Mylar)
(min. 125)
3” dia.
Includes
(min. 500)
BBUT-1
BBCOL-125
BBCOL-15
BBCOL-175
BBCOL-225
Mirror Sets
Die Size Part No.
Back with Pin inserted
Part No.
BBUT-125
BBUT-15
BBUT-175
BBUT-225
BBUT-25
BBUT-3
BBUT-35
BBUT-4
1-1/4”
1-1/2”
1-3/4”
2-1/4”
2-1/2”
3”
3-1/2”
4”
The 3 inch Circle Punch
is the perfect circle punch
for anybody working with
photos or 3 inch size
buttons.
Terms and Conditions of Sale
GENERAL
1. All accounts are sold C.O.D. certified cheque, money order or credit card only.
2. NET 30 DAYS (approved accounts only). Credit must be applied for on our credit application form.
3. A service charge of 2% (two per cent) per month will be assessed on past due accounts.
4. Delinquent accounts over 60 days will be placed on credit hold, and may revert to COD terms.
5. There will be a $25.00 Service Charge for returned cheques.
6. All discrepancies on shipment MUST be reported immediately.
PRICING
1. Prices and specifications are subject to change without notice.
2. All prices are NET prices. Effective prices shall be those on most current price list.
3. GST/HST is applicable on all merchandise.
4. Minimum order is $25.00 for Net 30 day accounts, or small order fee will be applied.
CREDIT CARDS
VISA, MASTERCARD and AMEX credit cards are accepted.
VISA, MASTERCARD - minimum $50.00 and AMEX - minimum $100.00
Credit cards are not accepted on Net 30 day accounts once terms have been extended.
FREIGHT
All goods are shipped F.O.B. Canadian Engravers Supply, prepaid and charged, unless specifically noted.
Otherwise shipping and handling charges will be added to the invoice.
GOODS DAMAGED IN TRANSIT
The customer is responsible to check all parcels received for any damages by freight carrier. If damages occur,
customer is to advise the carrier upon receipt of goods, keep all packaging, and advise our office immediately
for claim instructions.
NOTE: Carriers will refuse any claim if not advised immediately.
RETURNED GOODS
1. CUSTOM FABRICATED OR NON-STOCK ITEMS ARE NOT ELIGIBLE FOR RETURN.
2. Stock items are not eligible for return after 30 days.
3. Merchandise returns require a return goods authorization number. When calling, notify our Customer Service Department with product number and our invoice or packing slip number.
4. A credit will be applied to the customer’s account for returned goods, provided products are in the original
packaging and are received in good condition. No refund cheques are issued.
5. Credits will not be refunded to credit cards, only applied to the customers accounts for use on next order.
6. Returned goods are subject to 15% restocking charge, with a minimum charge of $10.00
WARRANTY / DISCLAIMER
The following warranty is in lieu of all warranties expressed or implied and covers all products sold by Canadian
Engravers Supply Company Ltd. SPECIFICALLY, SELLER AND MANUFACTURER DISCLAIM WARRANTY OF
MERCHANTABILITY OF OR FITNESS FOR A PARTICULAR PURPOSE and manufacturers/sellers only obligation shall
be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable
for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use the product.
Before using, user shall determine the suitability of the product for his intended use and User assumes all risk and
liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed
by officers of sellers and manufacturers.
CANADIAN ENGRAVERS SUPPLY ALBERTA LTD.
CANADIAN ENGRAVERS SUPPLY CO. LTD.
385 Admiral Blvd., #2, Mississauga, ON L5T 2M8
Tel: 905-795-1262 . 877-795-1262
Fax: 905-795-0219 . 800-632-3726
Email: sales@cesco.ca
CESCO BTF CAT 06 2013
www.cesco.ca . www.laserstuff.ca
Copyright© 2013 Canadian Engravers Supply Co. Ltd.
4730 14th St. N.E. Calgary, AB T2E 6L7
Tel: 403-250-6774 . 877-775-6774
Fax: 403-250-7718
Email: salesab@cesco.ca
$4