CYPRESS Intelligent Lighting LED Driver Evaluation Board Bluetooth® Smart (Low Energy) P R O D U C T O V E RV I E W COST- EFFECTIVE, LOW BOM SOLUTION FOR COLORDIMM ABLE WIRELESS LED LIGHTING SYSTEMS F E AT U R E S • Body: 4ch Buck DC/DC module Cypress’s S6SAL211A94 evaluation board is designed for Cypress’s S6AL211 family of intelligent LED lighting single chip solution for 10W LED lighting with Bluetooth® Smart communication. This board enables users to adjust brightness and color tones nto 256 steps with 4ch drivers. Users can expect a current of 300mA, 150mA, 200mA and 100mA for Ch1, Ch2, Ch3 and Ch4 assuming that white, red, green and blue are assigned respectively. (Driver IC: S6AL211A94) • Input Voltage: 85VAC ~ 264VAC • LED Number: 5 LEDs in series • Output Wattage: 10W • Communication: Evaluation Board ED Module Peripheral Vin: AC100V/200V AC/DC 24V LED Driver IC On/Off Control Dimming Control Smart Phone Bluetooth Smart Ready Central DC/DC Power Stage DC/DC Power Stage 3V UART S6AL211A Motion Sensor Illuminance Sensor Evaluation board with Bluetooth Smart www.cypress.com White 150mA • Dimming Color, Dimming Control - 4 Colors - 256 Steps DC/DC Power Stage DC/DC Power Stage - Motion and Illuminance sensor interfaces 5-series 200mA Bluetooth Smart - Bluetooth Smart (Low Energy) 300mA Green - Current Control (PWM Control under 1%) Red 100mA • Protection Function: Output Current Protection,Short protection, etc. • Board Size: 93mm x 53mm Blue 10W P R O D U C T O V E RV I E W Cypress’s S6AL211 family integrates the necessary components for intelligent lighting into a single chip solution reducing development costs and speeds time to market FEATURES OF THE S6AL211 FA MILY • The product family features a 4ch buck DC/DC LED driver IC • Integrates all peripheral components including pre-drivers, sensing amps and LDOs • Brightness dimmable down to 0.1% with the ability to adjust up to 100% • Minimizes printed circuit board (PCB) by 25% reducing the bill of materials and delivers a cost-competitive offering Cypress Competitor DC Power DC Power LED Module Bluetooth DALI Master DC/DC power stage S6AL211A DALI Phy • DALI: lighting system for BEMS(office,street lights, etc.) • DMX: color dimmable lighting network system (commercial shop displays,residential, museum, etc.) • Bluetooth/Zigbee: wireless sensor lighting system (office, residential, commercial facility, etc.) • I2C: high-end lighting system incombination with external MCU (illumination, plant cultivation, etc.) • PWM/0-10V: lighting system compatible with conventional dimming methods (office, residential, etc.) BLUETOOTH ® SM ART (LOW ENERGY) Bluetooth is a wireless communication technology with short distance, standardized as IEEE 802.15.1, and managed by Bluetooth Special Interest Group (SIG). Bluetooth Smart (Low Energy) is Bluetooth 4.0 standard released in July 2010 and combined with Low Energy technology and it provides reduced power consumption considerably and enables Bluetooth modules to be mounted on small devices such as mobile and sensor devices. This Bluetooth Smart (Low Energy) is expected to instrumental in opening the new wireless sensor network system market. LDO LED Module Bluetooth MCU Necessary to implement program Evaluation Board APPLICATIONS LDO DALI Master Gate DRV LDO DALI Phy DC/DC power stage Current Sense Additional Components SPECIFICATIONS • Body: 4ch Buck DC/DC module • Input Voltage: 24VDC, 19VDC, 12VDC • LED Number: - 5 LEDs in series (VIN=24V) - 4 LEDs in series (VIN=19V) - 2 LEDs in series (VIN=12V) • Output Current: 1AMAX, 350mAMAX • Dimming Control: - Type A: 256 Steps, PWM Control - Type B: 256 Steps,Current Control - Type C: 256 Steps,Current Control (PWM Control under 1%) • Communication, Dimming Color: - DALI: 1 color, DMX: 4 colors, - Bluetooth/Zigbee: 4 colors, - I2C: 4 colors, PWM/0-10V: 1 • Dimming Curve: Logarithm, Linear • Sensor Input: Illuminance Sensor, MotionSensor • Protection Function: Output Current Protection, Short protection, etc. • Clone Function: This is a function that IC receiving sensor input and communication commands becomes “parent”then synchronize its “children” connected by I2C • Package: LQFP48 (7.0mm x 7.0mm x1.7mm) EVALUATION SUPPORT TOOL – CENTRAL EVALUATION TOOL FEATURES Sample application of smartphone • 16M color choices from palette • Brightness control of each channel • Scene setting This application supports Android 4.4 and later (Operability confirmed withNexus 7/Android 4.4.4) Cypress Semiconductor Corporation 198 Champion Court, San Jose CA 95134 phone +1 408.943.2600 fax +1 408.943.6848 toll free +1 800.858.1810 (U.S. only) Press “1” to reach your local sales representative © 2015 -2016 Cypress Semiconductor Corporation. All rights reserved. All trademarks are the property of their respective owners. 002-08902 Rev.*A