Equipment Repair
& Product Guide
Serving Telco, Power, Utility, CATV & Contractors
800-225-6642 www.mohawkltd.com
REPAIR
2
ORDERING INFORMATION:
CALIBRATION
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
A WBE and ISO 9001:2000 Certified Company
Welcome to Mohawk Ltd.
We are pleased to provide you with this catalog highlighting the wide array
of products and services available from Mohawk Ltd.
Established in 1959, we support telecommunications, utility, cable and private industry with the highest quality equipment repair and calibration,
products and supply chain services to meet the needs of today’s constantly
changing world.
Mohawk Ltd. is proud to be a certified Woman-owned Business Enterprise
and an ISO 9001:2000 Certified Company. Each of our employees is dedicated to the highest quality standards and to providing you with exceptional service and support. Please add Mohawk Ltd. to your company’s bid list
for tool repair, product purchases and fleet products and services.
The services and products represented here are just a sampling of the many
available through Mohawk Ltd. Visit us at www.mohawkltd.com for
additional information. If you do not find the item you are looking for,
please call us for personal assistance. We will find it for you!
We look forward to serving you.
Sincerely,
Cathy Newell
President & CEO
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
3
REPAIR
CALIBRATION
ELECTRONIC TEST EQUIPMENT REPAIR
PRODUCTS SUPPORTED
BUT NOT LIMITED TO:
Battery Racks
Battery Testing Sets
Cable Locating Equipment
Circuit Boards
Channel Banks
Digital & Analog Meters
Digital Test Sets: DSL, ISDN, DDS, T1
Fan Cooling Units
Fault Locators
Fiber Optic Test Equipment
Legacy devices
Load Banks
Pin pointers
Plug-Ins
Portable Confined Space Gas Detection Equipment
Power Supplies
Receivers
Rectifiers
TDR’s
Test Sets
Transmitters
MANUFACTURERS SUPPORTED:
APC (3M)
Aines
Alcoa Fujikura
Ameritec
Amprobe
Associated Research
AT&T
AVO
Bacharach
Beckman
Beco
Berry
Biddle
Biosystems
BW Technologies
Canoga Perkins
Clic
Communications Technology Co.
Convex
Crowcon
CXR/Halcyon
Davis
Delcon
Dynamation
DynatelTM 3M
Elgin
Exfo
Extech
FIS
Fisher
Fluke
Fujitsu
4
Gas-Tech
Gas Measurement Instruments (GMI)
GN Nettest
Harris
Heath
Hewlett Packard
Independent Technologies
Industrial Scientific
Industrial Technology
Joslyn/Sierra
Jovial
Kepco
Lambda
Laser Precision
Leads & Northup
Lorain
Lucent
Lumidor
Malor
Marconi
Mark Telephone Products
Megger
Metrotech
Metro-Tel
Midtronics
MSA
Neotronics
Northeast Electronics
Nova
Noyes
Onmark
Parkway
ORDERING INFORMATION:
Pausin
Pelsue
Perkins
Photonix
Plantronics
Progressive Electronics
Radio Detection
Rae Systems
Riserbond
Sage
Siecor
Simpson
Sumitomo
Tau-Tron
T-Com
Tektronix
Telecommunications Techniques
Tempo
Triplett
UTeck
Wavetech
Western Electric
Western Progress
Weston
Wilcom
Zellweger Analytics
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
HYDRAULIC/PNEUMATIC/MECHANICAL EQUIPMENT REPAIR
PRODUCTS SUPPORTED BUT
NOT LIMITED TO:
LOW PRESSURE HYDRAULIC TOOLS:
CONSTRUCTION TOOLS:
Cable Cutters
Cable Spears
Chain Saws
Crimpers
Cylinders
Dewatering Pumps
Hand Held Tools
Hand Pumps
Impact Wrenches
Jacks
Jack Hammers
Pole Pullers
Pumping Stations
Stick Saws
Tampers
Water Pumps
PNEUMATIC TOOLS:
Chippers
Band Saws
Impact Guns
Jack Hammers
Pumps (Dewatering)
Reciprocating Saws
Tampers
Underground Piercing Tools
Gas:
Power Drills
Portable Water Pumps
Portable Propane Heaters
Portable 120V & 220V Generators
ELECTRIC:
Electric Impacts
Industrial Electric Tools & Drills
Jack Hammers
Manhole Blowers/Ventilators
Manhole Heaters
Pumps, Dewatering
HAND TOOLS:
Air Tools
Battery Operated Tools (All Types)
Bolt Cutters
Cable Lashers
Cable Strippers
Chain Hoists/Strap Hoists/Come-a-longs
Collapsible Power Reels
Hot Sticks
Ratchet Cutters
OTHER:
Gauges
Pressure Regulators
Shelters
Tents
Torches
LOOKING FOR A REPAIR CENTER TO SUPPORT
YOUR BUSINESS?
CALL TODAY FOR INFORMATION ON OUR REPAIR PROGRAMS
FOR ADDITIONAL INFORMATION ON ANY OF THE
MANUFACTURERS OR PRODUCTS IN THIS CATALOG PLEASE
CONTACT THE MOHAWK LTD. CUSTOMER SUPPORT TEAM
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
5
REPAIR
CALIBRATION
HYDRAULIC/PNEUMATIC/MECHANICAL EQUIPMENT REPAIR
MANUFACTURERS SUPPORTED:
3M
A.B. Chance
ADK
Airco
Aircraft Dynamics
Altec
AMP
Anderson
APC (3M)
Bebee
Black & Decker
Blackhawk
Bombardier
Bosch
Burndy
C&M
CTC
Cable Spinner
Cadillac
Cembre
Champion Corp.
Chicago Pneumatic
Cleco
Coffing
Craftsman
Crane
D&O
Danielwood
Dayton
Debruque
DeWalt
Dielectric Communications
Enerpac
Fairmont
Flygt
Gast
Generac
GMP
Gardner Denver
Gorman-Rupp
Greenlee
6
Grimmerschmidt
H.K.Porter
Hafey
Hilti
Hitachi
Homelite
Honda
Hook Hoists
Huskie
Husquevarna
Ingersoll-Rand
ITT-Bell & Gosset
Jameson
John Deere
Jonard
Kässbohrer
Kohler
Lincoln
Little mule
Lug-All
MBW Inc.
Mainco
Makita
Milwaukee
Mopeco
Multiquipt
NewDraulics
Nicopress
Nutmeg
Onan
OTC/Power Team
PSI
Pacer
Pelsue
Pisten Bully
Porter Cable
Poulan
Presto Lifts
Prosser
Pupco
Puregas
ORDERING INFORMATION:
Racine
Ram-Pac International
Ratcliff
Reliable
Remington
Rockwell
Rolatape
Ryobi
Seimans
Sepco
Sho-ME
Sioux
Skil
Smith
Stancor
Stanley
Stihl
Stow
Streamlight
Sullair
Team Fenex Ltd.
Telsta
Tendaire
Texas Pneumatic Tools
Thomas & Betts
Thor
Tugit Hoists
Uniweld
Victor
Wachs
Wen
Western Electric
Western Progress
Wheeler
Widder
Wilder
Wisconsin
Worthington
Yale Hoists
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
Mohawk Ltd. Quality Repair
Since 1959, our goal is to bring your commercial and industrial tools and equipment back to the manufacturer’s original operating specifications with the highest quality and fastest turnaround at a fair price.
As part of the repair process, our experienced technicians replicate the problem, troubleshoot the root
cause, provide a thorough maintenance check, estimate and quote, and upon your acceptance we make the
repair. We clean, test operating parameters and return the equipment in “like-new” condition. We provide
no-fee equipment evaluations so that you can make the best-informed decision for your equipment. We provide logistic support and supply chain management services to support your equipment throughout its lifecycle.
As an ISO 9001:2000 certified company and WBE Diversity Supplier, Mohawk Ltd. operates to defined
procedures and processes. From receiving, through evaluation, repair, testing, quality control and return
shipping, our process is well controlled and documented to maintain the highest quality repair for your
equipment.
■
One Source, Many Solutions!
■
Repair/Refurbishment/Calibration: Proven superior workmanship and technical expertise meeting
manufacturer's specifications
■
90-Day Warranty: Equipment returned in “like-new” condition with a 90-day warranty
■
New Product Sourcing: Quality acquisition services with recommended strategies to eliminate redundant
purchases, standardize your inventory, reduce the risks of equipment obsolescence and reduce your
overall costs
■
Customized Tracking Systems and Reporting: Custom reports (available in multiple media formats)
track the history, status and trends relating to each piece of equipment
■
Warranty Management: Track all units received to determine warranty status, provide logistical support
of repairs through the OEM
■
On-hand Parts Inventory: Faster Turnaround of repairs
■
Electronic Data Interchange (EDI): Electronic exchange of purchase orders and invoices
■
Experienced Customer Care and Technical Support: We’re here to answer questions and support you
■
Authorized Repair Center for Leading Manufacturers (OEM’s): Factory trained to provide the highest
quality repair available
■
ISO 9001:2000 Quality: Internationally recognized standard of quality
■
Woman-owned Business Enterprise: Meets Diversity goals
■
Fast Turnaround…Superior Quality…Fair Price
If you have a specific repair need, please call us. Our highly trained and experienced technical staff will be
happy to assist you.
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
7
REPAIR
CALIBRATION
PIPE & CABLE LOCATOR SYSTEM
Item # 9800 Series
Equipped with the most productive features you require, the 9800 XT series is the
only advanced locator available with Real-Time Continuous Gain AdjustmentTM
and Manual Gain Control. Designed for production locating, the 9800 XT series
exhibits enhanced sensitivity and uncomplicated line identification.
Distance Sensitive Left/Right GuidanceTM
Multi-frequency
■ Current measurement
■ Push-button depth
■ Passive 50/60 Hz, CP & RF
■ Automatic “best” frequency select
■ Real-Time Continuous Gain AdjustmentTM and Manual Gain
■ Improved sensor technology for accuracy and productivity
■ Lighted display on all models - low light operations without a flashlight
■
■
SHEATH FAULT LOCATOR SYSTEM
Item # 9800 Series
Detection and pinpointing of damages or breaks in buried cable plus all the
features of the 9800 XT pipe and cable locator.
High-output voltage will find high resistance faults.
Built-in fault resistance meter
■ Battery charge indication
■ Directional arrows
■ Signal strength and LCD display
■
■
PASSIVE MARKER LOCATOR SYSTEM
Item # 760DX
The Metromark is a portable transceiver designed for contractors and utility
companies to accurately detect and pinpoint all brands of buried passive
electronic markers.
■ Multi-Frequency - power, telephone, water, waste water and gas
■ Audio feedback and backlit LCD display
■ Stand-Alone System - portable & low cost
■ Two Sensitivity Ranges - locate & pinpoint
■ Comfortable, over-molded grip
■ Marker Ball - all frequencies
■ High output voltage will find high resistance faults.
■ Built-in fault resistance meter.
■ Battery charge indication
■ Directional arrows.
■ Signal strength. LCD display.
8
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
PIPE & CABLE LOCATORS
Item # 480 and 480B
“Split-Box” locators capable of pin-pointing buried utilities using
time-tested peak and null orientation. Rugged enough for daily use,
yet small enough for storage behind the seat of any utility truck. Add
the “search-handle” and convert the 480 or 480B into a metal detector. Locate energized power lines with the 50/60 Hz feature of the
480B. Bubble Level indicator for depth measurement.
FEATURES 480
■
■
Peak & Null Locate Mode
Extremely long battery life 250 - 400 Hours
FEATURES 480B
■
■
50/60 Hz power detection mode
Auto-Off receiver saves batteries
PIPE & CABLE LOCATORS
Item # 510 and 530
Two locators for general-purpose pipe locating under the most demanding conditions. Utilizing 83 kHz in a lightweight package, the 510’s
manual circuitry allows fast and accurate locates. For more difficult
locate conditions, the 530’s high 332 kHz frequency is “the” choice for
identifying all the underground utilities. Lightweight receiver, 1.75 lb.
FEATURES 510
FEATURES 530
Manual sensitivity
■ Peak and null operation
■ One hand operation
■
■
High frequency 332 kHz
Peak and null operation
■ Best locator for street lighting and cast iron mains
■
SERIES PIPE & CABLE LOCATOR
Item # 810 and 850
Make locating easy with Distance Sensitive Left/Right GuidanceTM,
digital signal strength, fully automated gain control, and push button
depth. These full-featured locators provide a short learning curve and
reduce operator errors, resulting in a lower cost of ownership.
FEATURES 810
83 kHz for insulated/gasketed water and gas pipe applications
High frequency jump insulators and gaskets
■ Excellent inductive, direct, and clamp locating
■
■
FEATURES 850
9.8 kHz for long distance cable applications
Excellent isolation from adjacent utilities
■ Rechargeable batteries
■ Efficient high-power 2 watt transmitter facilitates long distance locating
■
■
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
9
REPAIR
CALIBRATION
FERROMAGNETIC METAL DETECTOR
Item # 880B
Highly sensitive, easily locates buried iron and steel objects while
rejecting non-magnetic metals such as aluminum and copper. Easily
locates large and small objects. Using finely tuned electronics, the
880B will easily and accurately locate small property markers near
cyclone fencing.
■ Visual and audible output
■ Greater usable depth sensitivity
■ Variable sensitivity adjustment
■ Rejects non-magnetic objects
■ High rejection of power source interference
■ Lightweight, high-impact construction, rugged, compact and
weather resistant
HL 90 - LEAK LOCATOR
Item # HL90
Now leak locating can be accomplished more easily and economically with the HL 90, a rugged, reliable electronic instrument for
detecting underground fluid leaks. It features the latest technology
in leak detection at an affordable price.
■ Illuminated LCD bar graph displays leak intensity
■ Selectable filter control for broad and narrow band frequency
response
■ Easy to operate
■ Memory retains loudest leak sound measurement
LEAK DETECTOR
Item # HL 5000
The new HL 5000 water leak locator is the next generation of quality
water leak detection instruments. Using a new Dual Segment Analysis
(DSA) the HL 5000 is both a pre-locate and pinpoint instrument. The
DSA displays both the minimum value of the constant leak sound as
well as the leak sound. Using a powerful signal processor extraneous
sounds are suppressed and the constant sound of the leak is displayed
as the minimum sound.
Uses DSP technology to clearly recognize the leak sound, even when there is noise in the environment
DSA (dual segment analysis) technology: simultaneous display of the current and minimum values
■ Ability to hear/view leaks: Histogram measurement w/nine simultaneously displayed DSA measurements
■ High audio quality
■ Large display to easily read measurement results
■ Plastic pipe locate mode with RSP3 impulse generator
■ Frequency analysis of the recorded results
■ Real-time recording of sound measurement for up to 30 minutes
■
■
10
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
INSULATION TESTER
Item # BMM 80
Megger is the originator of insulation resistance testing. The first instrument to
perform such testing was introduced over 100 years ago. Today, Megger continues to be the leader in the field of insulation resistance testing with a line of
innovative, high quality 1-kV, 5-kV and 10-kV insulation testers
High spec, low voltage insulation tester
Insulation resistance to 200 GΩ
■ Test Voltages 50, 100, 250, 500
■
■
GROUND TESTER
Item # DET3TD
DET3TD offers a complete kit for customers wishing to conduct earth
electrode testing using the 2 and 3 pole techniques
■ 2 and 3 point testing
IP 54 rated
Selectable 25V or 50V output ■ Complete with lead and stake kit
■ Simple one button operation
■ Hardwearing carry case
■ Delivered with calibration certificate
■
■
FOUR TERMINAL GROUND TESTER
Item # DET 5/4D
This instrument is suitable for the testing of earth electrodes and measuring earth resistivity. The instrument checks for conditions that may
cause an invalid reading during a test. The low service error and wide
operating temperature range enable accurate results to be achieved
in real, on-site conditions.
Choice of three or four terminal measurement
Autoranging from 10 mΩ to 20 kΩ
■ Tests to BS7671, BS7430, BS6651 and VDE 0413
■
■
MULTIMETER
Item # AVO 300 US
■ All units feature simple to use autoranging functions.
■ The rubber-armored case is extremely tough and has an integral rear stand
for bench use which folds out completely for hanging the instrument from a
belt or hook
■ Integrated probe retention clips aid handheld testing and provide useful stor
age for the probes
■ Powered from a standard 9V battery. An auto power-off feature and a battery
warning indicator ensure optimum battery use and no waste
■ Meet the stringent safety requirements of CAT III 600V
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
11
REPAIR
CALIBRATION
BATTERY TESTER
Item # BITE 3
The BITE 3 determines the health of lead-acid cells up to 2,000 Ah by
taking measurements of the most important battery parameters. It
measures cell impedance, cell voltage, intercell connection resistance
and float and ripple currents. It also measures the harmonic content of
the ripple current with its built-in spectrum analyzer. Its firmware is
upgradeable through the internet.
The BITE 3 comes complete with:
■ ProActiv software
■ Canvas carrying case
■ RS232 modem cable
Dual point test leads (7 ft)
Line charger
■ Spare test lead tips
■
■
TIME DOMAIN REFLECTOMETER CFL 535F
Item # 655535F
The CFL535F offers nine user-selectable ranges and measurement
resolution down to four inches. Among its unique features are five
user-selectable pulse widths for each range, which enhances fault
location on both long cable runs and close-in faults. Its display zoom
feature allows the cursor to be accurately positioned at the beginning of
the fault.
■ No blocking filter required for live line testing up to 300Vac
■ Output pulse amplitude control
■ Automatic event finder key
■ Graphical help menu
DIGITAL EARTH CLAMPMETER
Item # DET 20C
A useful addition to the more traditional methods of earth/ground resistance
testing that may require disconnection and the use of stakes or ground rods.
Simply clamp around the conductor or stake/rod and measure the resistance to
ground quickly and accurately. Can be used to measure earth/ground resistance in multiple loop installations without disconnecting the earth or ground,
allowing quick and easy testing in total safety.
These clamp-on testers feature improved ground resistance ranges from 0.025
mÙ to 1550 mÙ and ground leakage current from 0.2 mA to 35 A.
The units are rugged, compact and have configurable audible alarms. They
feature auto shutdown (which is also configurable), data storage and self calibration on power-up, and are supplied with a calibration loop – all contained
in a rugged carrying case. The DET20C also comes with a RS232 interface
cable and is compatible with Megger Download Manager Software.
12
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
TONER AND PROBE KIT
Item # 200 Kit
Simply attach the IntelliTone Toner to a cable and set the sensing mode on
the IntelliTone Probe. IntelliTone energizes cable conductors with a smart,
sychronized digital signal that helps the user to Locate, Isolate and Validate.
Identifies and diagnoses 10/100/1Gb Ethernet link connectivity with
NIC/hub indication
■ Identifies and diagnoses POTS with 2 line POTS service and polarity
■ Validates twisted pair installation with CAbleMap capability which
identifies common cable miswires
■
SIDEKICK PLUS ADVANCED CABLE
MAINTENANCE TEST SET
Item # 1155-5000
The Sidekick® Plus Advanced Cable Maintenance Test Set is a multifunction test tool for troubleshooting on twisted pair. This lightweight, handheld meter quickly and accurately uncovers intermittent troubles that other
test sets can't detect. It uses digital technology to combine VOM and loop
current tests, longitudinal balance (Stress Test), transmission and noise,
open locator, load coil detection, RFL and a powerful TDR into one easyto-use test set. Test functions can be selected and used individually, or run
automatically by using the innovative Auto-test.
PROFESSIONAL TONE AND PROBE KIT
Item # 701K
This popular kit is used by technicians everywhere. The 701K is used
to identify single conductors or cables within a bundle, at a crossconnect point or at remote ends. The kit consists of the 77HP High
Power Tone Generator, the 200EP Inductive Amplifier and the rugged
700C woven polyester carrying case.
All kit components are available individually.
MOHAWK LTD.
REPAIRS AND CALIBRATES ALL TYPES OF TEST EQUIPMENT
CALL US AT 800-225-6642
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
13
REPAIR
NEW
CALIBRATION
FOCUS FIBER OPTIC TOOL
Item # FOC 100
The preferred alternative to using your hands to insert and remove SC and
LC fiber optic connectors in small form factor (SFF) patch panels. Helps
prevent disturbing adjacent cables in densely populated live panels.
Integrated light for improved visibility in the dark.
Long tapered jaws
■ Reach through congested areas
■ Support the cable and delicate fibers
■ Easily manipulated with either hand
Integrated flashlight
■ Makes tool easy to navigate
■ Illuminates ports and connectors
■ Uses two standard AAA batteries
MANUAL WIRE WRAPPING TOOL WITH LED
FLASHLIGHT
Item # G100/R 3278 FL
NEW
This tool combines the rugged durability of all metal construction with
an insulative material that provides 1000V dielelectric strength across
most of the housing, and a LED flashlight for task lighting.
■ Provides up to ten revolutions per squeeze
■ Accommodates wire sizes from 18-32 AGW
■ Interchangeable bits and sleeves
FIBER OPTIC STRIPPER/3 HOLE
Item # JIC-375
Three hole Fiber Optic Stripper model performs all common fiber stripping
functions. This Fiber Optic Stripper strips the 2-3 mm fiber jacket down to
the 900 micron buffer coating. The second hole strips the 900 micron
buffer coating down to the 250 micron coating and the third hole is used to
strip the 250 micron cable down to the glass fiber without nicks or
scratches.
NOTE: These tools are cutting devices for stripping buffer coatings from
optical fiber and not intended to strip wire.
FIBER OPTIC STRIPPER
Item # JIC-125
The Fiber Optic Stripper is used for stripping 250 micron buffer coating
from 125 micron optical fiber. Preset at the factory so no adjustments are
necessary. Unique design prevents nicks or scratches on the optical fiber plus
blades are ground and hardened for long life. Yellow plastic dipped handles
5 3/16" long.
NOTE: These tools are cutting devices for stripping buffer coatings from
optical fiber and not intended to strip wire.
14
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
NEW
CALIBRATION
PRODUCTS
MULTIPACK F/O STRIP, CLEAN, & CLEAVE
Item # Multipack-S (Single to Ribbon Fiber)
Item # Multipack-R (Ribbon Fiber 2-12)
Fiber Strip, Clean and Cleave all with one tool
Non-Flame for installation in the field
■ Eliminate fiber cracking & keep high tensile strength
■ Three-in-one strip, clean, cleave from single to ribbon fiber
■ Integration of fiber preparation steps
■ Skill free and no training cost
■ Easy operation, maintenance and small size for field installation.
■ Single action operation for cleave and fiber collecting
■ After stripping and cleaving, guarantee very high consistent quality
NEW
FIBER OPTIC CLEAVER
Item # Max Cl-03B Single Fiber
Item # Max Cl-03M Ribbon Fiber
■ Automatic Single Operation Mechanism
■ Typical Cleave Angle: 90°± 0.5°
■ Fiber Holder Adaptation
■ Configuration: Single & Ribbon Fibers
■ High Precision Cleaving Blade with 16 Cleave Spots
■ Adjustable Cleave Length: 5-20mm For Single Fiber, 10mm for Ribbon
■ Simplified Blade Adjustments & Replacements
HAND HELD LIGHT SOURCE
Item # ML9055-0000
Dual Light Source 850/1300nm LED with ST Adapter
■ Constant Wave (CW) or 2kHz Modulation
■ Auto Shut-off
■ Low Battery Indicator
■ 30-Hour Typical Battery Life
■ Protective Rubber Boot with Built-in Stand
■ One-Year Warranty
■ Operating Manual and 9V Battery included
HAND HELD POWER METER
Item # MLF18513HR
A power meter is the essential tool for measuring optical power
within a fiber optic link
■ Zero Set Reference Storage Ability at Each Wavelength
■ 2mm Germanium Photodiode
■ Standard with 2.5mm Universal Adapter
■ Auto Shut-off, 70-Hour Battery Indicator/Low Battery Indicator
■ Protective Rubber Boot with Built-in Stand
■ Operating Manual and 9V Battery included
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
15
REPAIR
CALIBRATION
TS-22 HANDSET
Item # 22800-009
The TS22 Test Set’s unique built-in one-way amplified speaker provides
three audio levels for hands-free listening and use with automated voice
response systems. Multiple memories enable storage of nine 18 digit
telephone numbers in repertory dialer (speed dialing). The last number
redial feature eliminates the need to re-key your last entry. The TS22
Test Set offers an unbeatable combination of reliability, durability and
expanded utility.
■ (ABN) angled bed-of-nails clip
■ DropSafe™ reliability passes 20 foot drop test
TS-22A HANDSET
Item # 22801-009
The TS22A Test Set is equipped with all the features of the TS22
Test Set with the addition of a built in two-way speakerphone. The
two-way speakerphone enables the user to operate hands free. The
effect of ambient noise can be eliminated with the Mute switch,
allowing the technician to monitor a line uninterrupted while in Talk
Mode. A standard among field professionals, the TS22A model is a
reliable and durable test set that is ready for any job.
TS-44 HANDSET
Item # 44801-009
The TS40-Series Test Sets combine an ergonomic waterproof design,
that exceeds American Military Specification MIL-STD-810E and is
DropSafe tested to 20 feet onto concrete with a standard 3-year warranty. The TS40-Series offers speakerphone capability for true handsfree conversations, designed with superior high-impedance monitor to
protect data lines. Advanced testing functions for low/high voltage
and low (mA) current detection are displayed in easy-to-read LEDs.
Always-on Monitor Mode simplifies operation and speeds testing; just
clip on to the pair and it is monitoring.
CABLE FAULT FINDER
Item # TS-100
This easy-to-use, competitively priced tester is three tools in one -- a
fault locator, a cable & wire manager and a tone generator with
SmartTone™ technology. From just ONE END of any two or more
conductor cable you can measure up to 3,000 feet (915 meters).
Easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it's perfect for technicians unfamiliar
with Time Domain Reflectometery (TDR.)
16
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
REPLACEMENT TEST SET CABLES
ML103 TDR Test cable for TDR 500 & 900 shortstop and others
Tempo 1110C Cord
■ ML102 TS-44 cord with strain relief
■ ML101 Handset cord for AT&T, Beco, Harris, Fluke, & WE sets
■ ML99-0112 KS8455 Test Leads
■ ML0036 Coupler Cable for Dynatel 500 &573
■ ML0032 6’ Breakdown Test cord
■ ML0022 30’ Breakdown Test Cord
■
■
Call for all your cable needs.
We stock a large inventory available for immediate delivery.
BATTERIES
Equipment
KS 14103 Breakdown Test Set
KS 14103 Breakdown Test Set
76C Test Set
76C Test Set
KS8455 Meter
188A Voltage Detector
147 Amplifier
Dynatel 500, 500A, 573, 573A, 600
Dynatel 710A
Perkins "Busy Boy"
Standard Lantern Battery
Reclosure Battery (form 3)
Reclosure Battery (form 4,5,6)
Catalog #
HS 14196 15/set
711
HS 6570
763
455
522
412
510S
246
246
509
NG001
4X0859-0012
Voltage
45 volts
4.5 volts
4.5 volts
24 volts
45 volts
9 volts
22.5 volts
6 volts
9 volts
9 volts
6 volts
volts
volts
CHARGE YOUR BATTERIES REGULARLY FOR MAXIMUM USAGE.
MOHAWK LTD. CARRIES A FULL LINE OF BATTERIES.
DON’T SEE IT HERE?
CALL US AT 800-225-6642
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
17
REPAIR
CALIBRATION
KEYSTONE TIP SCREWDRIVER HEAVY-DUTY ROUND SHANK
Built to handle the tough jobs with ease
Hex bolster reinforces shank for hard use and allows wrench assisted turning
■ Meets or exceeds applicable ASME / ANSI specifications
■
■
Cat. No.
602-3
602-6
602-10
Shank Tip Width
7/32" (6mm)
5/16" (8mm)
3/8" (10mm)
Shank Length
3" (76mm)
6" (152mm)
10" (254mm)
Overall Length
6-3/4" (171mm)
10-15/16" (278mm)
15-7/16" (392mm)
Weight (lbs.)
.15
.35
.60
PROFILATED® PHILLIPS-TIP SCREWDRIVER
Tip is precision-machined to provide a more consistent geometric symmetry than
conventional Phillips-tip screwdrivers
■ Provides accurate fit and torque without slippage
■ Meets or exceeds applicable ASME / ANSI specifications
■
Cat. No.
603-3
603-7
603-10
Overall Length
6-3/4" (171mm)
11-5/16" (287mm)
14-15/16" (10mm)
Shank Length
3" (76mm)
7" (178mm)
10" (364mm)
Point Size
No. 1
No. 2
No. 2
Weight (lbs.)
.15
.30
.35
7-PIECE CUSHION-GRIP NUT-DRIVER SET - 3" SHANKS
Full hollow shafts facilitate work on stacked circuit boards or
other long bolt applications
■ Internal flanges provide solid, twist-resistant shaft anchor
■ Premium chrome plated for smooth feel and corrosion resistance
■ Meets or exceeds applicable ASME / ANSI specifications
■ Handle end is also color coded for easy identification
■ Cushion-Grip handle allows for greater torque and comfort
■ Patented Tip-Ident® quickly identifies nut driver and size
■
Cat. No. Color Code Hex Size Shank Length Overall Length
630-3/16
black
3/16"
3" (76mm)
6-3/4" (171mm)
630-1/4
red
1/4"
3" (76mm)
6-3/4" (171mm)
630-5/16
yellow
5/16"
3" (76mm)
6-3/4" (171mm)
630-11/32
green
11/32"
3" (76mm)
6-3/4" (171mm)
630-3/8
blue
3/8"
3" (76mm)
6-3/4" (171mm)
630-7/16
brown
7/16"
3" (76mm) 7-5/16" (186mm)
630-1/2
red
1/2"
3" (76mm) 7-5/16" (186mm)
18
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
LONG-NOSE TELEPHONE WORK PLIERS
Induction hardened side-cutting knives for long life
Convenient .030" stripping hole
■ Knurled jaw tips for greater gripping power
■ Curved handles provide greater tool control
■
■
Cat.
No.
Handle
Color
Handle
Finish
Jaw
Length
Jaw
Thickness
Jaw
Width
Knife
Length
Overall
Length
71980
yellow
plasticdipped
1-7/8"
(48)
3/8" (10)
11/16"
(18)
1/2"
(13)
6-5/8"
(168)
Point
Weight
Thickness
(lbs.)
1/16" x 3/32" .25
( 1.6 x 2)
6" HEAVY-DUTY DIAGONAL-CUTTING PLIERS
Heavier design for all-purpose use
Tapered nose for easy working in confined areas
■ Bell System Type "W" notches - Slit insulation cleanly
■
■
Cat. No.
Cutting
Knives
Handle
Color
Handle
Finish
Jaw
Length
Jaw
Thickness
Jaw
Width
Overall
Length
Weight
(lbs.)
D252-6SW
standard
red
plasticdipped
13/16"
(21)
7/16"
(11)
3/4"
(19)
6-1/8"
(156)
.33
9" HIGH-LEVERAGE SIDE-CUTTING PLIERS
High-leverage design. Rivet is closer to the
cutting edge for 46% greater cutting and gripping
power than other plier designs
■ Streamlined design with sure-gripping, crosshatched knurled jaws
■
Cat. No.
Handle
Color
D213-9NE dark blue
Handle
Finish
plasticdipped
Jaw
Jaw
Jaw
Length Thickness Width
1-19/32"
5/8"
1-1/4"
(41)
(16)
(32)
Knife
Length
25/32"
(20)
Nose
Overall Weight
Type
Length (lbs.)
New
9-3/8"
1.14
England (238)
CABLE/LINEMAN’S SKINNING KNIFE – HOOK BLADE, NOTCH & RING
No contact between stainless steel ring and hardened steel blade
Steel blade withstands frequent scoring and slitting of cable jacket.
■ Notch on blade back for scraping or removing wire insulation
■ Comfortable textured handle with finger grooves and guard
■ Rectangle-shaped handle design for attachment to some utility
hot stick equipment
■ Leather sheath available, Cat. No. 5163
■
■
Cat. No.
1570-3
Description
Handle Color
hook blade, notch, and ring
red
Repair capabilities, pages 4-7.
Length Less Ring
8" (203mm)
Weight (lbs.)
.30
WWW.MOHAWKLTD.COM
19
REPAIR
CALIBRATION
CABLE SPLICER KIT
Item # HLCP-K 100CS, 149, 150
Heritage provides a Cable Splicer Kit for the Models 100CS, 149
and 150. Order Kit by base model. Kit contains Cable Splicer
knife and screwdriver combo tool, Splicer snips and leather holster.Example: HLCP-K 100CS, HLCP-K 149, or HLCP-K 150
the 100Kn, and leather holster, part # H-11
CABLE SPLICER SNIP
Item # 100CS
The most widely used tool in the electronic communication
market. The 100CS is chrome-over-nickel plated and has wire
stripping notches for 19 & 23 gauge wire. The bottom blade has
serrations the full length of the cutting edge.The back of the
blades has a file and scraper making it excellent for
cleaning wire.
BLUE KNIFE
Item # 100Kn
Cable Splicer Knife and Screwdriver Combo
Experience the advantage of two tools in one.
■ High carbon,nickel plated. Rockwell 59 C scale.
■ Length 5-3/4", cutlength 1-1/2".
■ Saves time and work!
■
■
ELECTRICIAN/LINEMAN’S SNIP
Item #149
Ergonomically free fall Electrician/Lineman Snip. Gives you
comfort with hi-leverage cutting action. The large ring has a soft
blue-coated handle that nests in the palm of your hand. One blade
has stripping notches for 19 & 23 gauge wire and the other blade
is fully serrated. Hot-forged high-carbon steel, nickel-plated.
Available in Stainless, Item #150.
20
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
GATOR CENTER CONDUCTOR BEVELLER
Item # GATOR TOOL
With an ergonomic body design and reversible, replaceable teeth the
Gator is unique in that it is the only tool that bevels and cleans the
center conductor in two easy steps. Beveling the center conductor to
eliminate burrs before removing the bonded dielectric lengthens the
life of the scrapers. Factory-calibrated tools and cartridges are colorcoded according to cables and connectors for easy identification.
CARPET CUTTER
Item # 4375
This tool cuts carpet easily and safely, without creating unsightly
snags, pulls, or the dreaded “snowball effect.” Hardened tool-steel
blades produce a clean cut and a replaceable carpet plug each time.
SUPER CPT STRIPPING TOOL
Item # SCBT
Designed to strip large-diameter 50 and 75-ohm braided cable, this tool
features a quick-release mechanism to make cartridge changes fast and
safe. Two cartridge slots make it possible to strip both large and small
cables without changing tools or cartridges.
ALL-IN-ONE CABLE PREPARATION TOOL
Item # AIO-625
This tool simultaneously strips back the jacket, cores the dielectric,
strips back and bevel the outer conductor, and measure and bevel the
center conductor on 0.412" through 0.875" coaxial cables.
MOHAWK LTD. SUPPORTS LARGE AND SMALL UTILITY
CONTRACTORS AND CONSTRUCTION CREWS. CALL TODAY
WITH YOUR TOOL AND EQUIPMENT NEEDS.
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
21
REPAIR
CALIBRATION
IMPACT WRENCH
Item # HIW 716
Gerotor motor has a lifetime warranty and greater efficiency with longer
life than gear motor tools.
■ High torque output provides unmatched power, with 500 ft-lbs of torque
@ 7 GPM.
■ Dual-action spool for Open or Closed center operation.
■ Innovative, 3-part design allows tool sub-assemblies to be quickly
removed/replaced if service is required.
■ 7/16" Tri-bal Quik Chuck accommodates standard 7/16" hex drive bits
and accessories.
■
ACCESSORIES
7/16" Quick Chuck Adapter x 1/2" Square
ADP Male/Male SAE #6, 3/8 NPT
■ Dual Socket -1/2" Drive x 1" x 1 1/8"
■ Dual Socket -1/2" Drive x 13/16" & 15/16"
■
■
Mohawk Ltd. carries a full line of sockets and bits.
Call us today with your specifications.
5/8" HEX HEAVY DUTY ELECTRIC IMPACT
Item # 8062
Formerly known as the Model ”C” Impact Wrench, this
super-duty wrench features:
All aluminum lightweight construction with ball bearings throughout
Back-cap reversal provides full power in both forward and reverse
■ 1700 RPM - 1725 IPM - 6 Amps - 500 ft. lbs torque
■ Quick-Change 5/8" hex chuck
■ UL and OSHA approved
■
■
18 VOLT PATRIOTTM
Item # PAT750-18V
Battery Actuated Self-Contained 12 Ton Hydraulic Tool
True one handed operation for advance, retract and hold
12 tons of output force,State-of-the-art crimping head design,
with 360° head rotation
■ Ni/MH batttery eliminates voltage depression (memory issues)
■ Audible "pop-off" and green light indicator indicates completion
of crimp
■ PAT750-18V with rubber covered head is available
■
■
22
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
IN-LINE™ PATMD6-14V SERIES
NEW
Item # PATMD6-14V Permanent “BG”(5/8") and “D3” grooves
Item # PATMD6-8-14V Permanent “O”and “D3”grooves
Item # PATMD6-6-14V “Snub-Nose” w/permanent “D3” groove
The BURNDY® IN-LINE™ tools are battery actuated and can be
operated with one hand, allowing for advance, retract and hold functions
for easier operation. The PATRIOT® PATMD6-14V series of tools incorporate a
high speed hydraulic pump generating 6 tons of crimping force. This design provides a
consistent, reliable connection every time. The IN-LINE™ tool features interchangeable MD6
series heads, capable of using “W” and “X” style dies in the permanent D3 groove, feature 350°
rotatable heads for operation in virtually any position. The PATMD6-14V uses BURNDY® dies and
off-the-shelf connectors. Available with case. MD6 holster available see page 36
Crimp Force 6 Tons
Weight 7.8 lbs.w/battery
■ Voltage 14.4V-DC
Crimp time approx 5 seconds
■ Width 3.69"
Length 20.91"
■ Recharge time < 45 mins
■
■
■
■
■
Height 5.48"
KOPMPRESSOR
Item # LPHY750
Remote Operated 12-Ton Low Pressure Hydraulic Compression Tool.
Industry exclusive visual and audible crimp indicator assures properly
completed crimps with 12 tons of force.
■ Covers a wide range of applications with its 1.65" jaw opening
■ Uses all standard Burndy “U” dies
■ 350° head rotation for versatile tool head positioning allowing
the user to get into tight areas easier
■ Operates on open center or closed center hydraulic systems
■ Ergonomic handle design for better balance/less fatigue
■ Double-acting tool for hydraulic ram advance and extraction
■ Industry-exclusive spring back-up for ram extraction if hydraulic
system shuts down
PATRIOT DIELESS SYSTEM
Item# PAT 644-18V
Battery Actuated Self-Contained 12 Ton Hydraulic Tool
■ Dieless System
■ True one-handed operation for advance, retract and hold
■ 11 tons of output force
■ Ni/MH battery eliminates voltage depression (memory issues)
■ Audible “pop-off” and green light indicator indicates completion
of crimp
■ State-of-the-art crimping head design, 360° head rotation
■ PAT644C-18V with rubber covered head is available
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
23
REPAIR
CALIBRATION
PUMP KIT
Item # ML-12 ML-12 KIT
Design Advantages
■ 1 HP 2" pump with stainless steel outer casing.
■ Double mechanical seals run in a separate oil filled compartment.
Outboard lip seal helps prevent solids from infiltrating primary sealing unit.
■ High torque motor with large service factor.
■ Thermal overload protection.
■ Cast iron diffuser with rubber liner prevents wear on the diffuser.
■ Cast iron impeller for extended life.
ML12: Includes Pump w/quick disconnect fitting and rope.115 V/ 11 Amps, 33 lbs.
ML12KIT: Includes Pump, w/fitting, rope, carrying case and 25' discharge hose
with quick disconnects on both ends.
POLE BITS
High quality construction provides lasting performance. Hollow center twist design, single spur cutter
and side lip provides fast continuous flow of chips.
Note: 11/16" used to drill 5/8" hole and 13/16" used to drill 3/4" hole
18" Overall length 12" Twist - 7/16" Hex
47909
9/16"
47911
11/16"
47913
13/16"
47915
15/16"
18" Overall length 12" Twist - 5/8" Hex
48109
9/16"
48111
11/16"
48113
13/16"
48117
1-1/16"
HYDRAULIC CHAIN SAW
Item # HHS Series
■ Gerotor motor has lifetime warranty
■ Supplied with .325" pitch anti-kickback chain for maximum safety.
■ Dual action spool quickly and easily changes from Open to Closed
center operation.
■ Automatic adjustable chain oiler enables longer running time without
damage to chain/bar due to lack of lubrication
■ Low RPM and high torque-minimize saw kickback
■ Choice of 11", 13", 16" or 20" bars.
Catalog #
HHS-O/C-B11
HHS-O/C-B13
HHS-O/C-B16
HHS-O/C-B20
24
Overall Length
21" (53 cm)
24" (61 cm)
27" (69 cm)
30" (76 cm)
Bar Length
11" (28 cm)
13" (33 cm)
16" (41 cm)
20" (51 cm)
ORDERING INFORMATION:
Cutting Capacity
9" (23 cm)
12" (31 cm)
15" (39 cm)
18" (46 cm)
Weight (approx.)
7 1/4 lbs. (3.29 kg)
7 1/2 lbs. (3.40 kg)
8 lbs. (3.62 kg)
8 1/2 lbs. (3.85 kg)
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
SUBMERSIBLE PUMP 2" HIGH VOLUME
Item # HP2HV
Burndy’s latest offering in submersible pump technology, the HP2HV is
a 2" pump that brings high performance, economy and versatility
together in one package. The pump provides flow rates at its respective
head height of: 300GPM @ 20' up to 80GPM @ 70' of head height
The HP2HV can be converted to accept an optional 2 1/2 inch discharge, part number HP2HV2.5 CONVERSION.
3" SUBMERSIBLE TRASH PUMP
Item # HTP3
■ Double sealed hydraulic motor shaft protects hydraulic source from water
■ Thumb screw secured lid so cover is easy to remove without special tools
■ Totally submersible
■ Pumps solids w/o blockage or damage
■ Self lubricating design
■ Cast aluminum pump body
■ Provides with whip hoses
■ High impact abrasion resistant liner
■ Flow 7-10 GPM
■ Pressure 1000-2000 PSI
■ Max Back Pressure 250 PSI ■ Weight 40 lbs
■ Pump Capacity 500 GPM
■ Discharge size 3" outlet
■ Ports 1/2" x 14 (#8)NPT (F) ■ Diameter 12"
POLE SAW
Item # HPS SERIES
■ Gerotor motor has lifetime warranty
■ Dual action spool quickly changes from open to closed center operation
■ Automatic, adjustable chain oiler enables longer running time
without damage to chain/bar due to lack of lubrication
■ .325 pitch anti-kickback chain supplied standard
■ Low RMM and high torque-minimize saw kickback
■ Choice of 11" or 13" bars.
Catalog #
HPS-O/C-4-B11
HPS-O/C-4-B13
HPS-O/C-5-B11
HPS-O/C-5-B13
Overall Length
73" (185 cm)
76" (193 cm)
85" (216 cm)
88" (224 cm)
Bar Length
11" (28 cm)
13" (33 cm)
11" (28 cm)
13" (33 cm)
Handle Length Cutting Capacity Weight (approx.)
48" (122 cm)
9" (23 cm)
8 3/4 lbs. (3.96 kg)
48" (122 cm)
12" (31 cm)
9 lbs. (4.08 kg)
60" (152 cm)
9" (23 cm)
9 1/4 lbs. (4.19 kg)
60" (152 cm)
12" (31 cm)
9 1/2 lbs. (4.30 kg)
TAMPER
WITH ON/OFF VALVE
Catalog #
HPT-60-RI
HPT-72-RI
HPT-84-RI
HPT-96-RI
Overall Length
60" (152 cm)
72" (183 cm)
84" (213 cm)
96" (244 cm)
Item HPTR1 Series
■ Available with or without On/Off control valve
■ Patented valving prevents impacting of the ram within the tamper
■ Stroke amplitude of 1 5/8"
■ Stroke frequency of 1375 blow/min is ideal for compacting
around poles, posts, footings and other objects
■ Interchangeable heavy duty tamper shoes allow for flexibility
NO ON/OFF VALVE
Weight (approx.)
29 lbs. (13 kg)
30 lbs. (14 kg)
32 lbs. (15 kg)
34 lbs. (15.4 kg)
Repair capabilities, pages 4-7.
Catalog #
HPT59-RI
HPT71-RI
HPT83-RI
Overall Length
59" (150 cm)
71" (180 cm)
83" (211 cm)
Weight (approx.)
26 lbs. (12 kg)
28 lbs. (13 kg)
31 lbs. (14 kg)
WWW.MOHAWKLTD.COM
25
REPAIR
CALIBRATION
AERIAL-BASKET OVAL BUCKET
WITH 15 INTERIOR POCKETS
No. 6 canvas
ABS hooks are resistant to temperature changes
■ Supplied with two Cat. No. 5144H hooks
■ Black molded polypropylene bottom
■ Replacement hooks available Cat. No. 5144H
■
■
Mohawk Ltd. carries a full line of Aerial Buckets and Trays.
Call today with your specific requirements.
Cat. No.
5144
Extra Features
Two ABS hooks (Cat.
No. 5144H)
Height
10"
(254)
Length
14"
(356)
Width
7"
(177)
Pockets
15 inside
pockets
Weight (lbs.)
2.05
LINEMAN’S TOOL APRON
Item # 4500Y
This lineman’s tool apron features 2 auger bit holders lined with PVC
pipe, 11 socket pockets, 2 nut and bolt bags, a hammer loop, and a 2
pocket holster. All pockets are sewn through 2 layers of vinyl coated
nylon plus one layer of heavy canvas, the vinyl pockets help grip the
tools and will not stretch. The two large grommet holes are used to
suspend the apron from the bucket using PVC polymer hooks.
■
Dimensions 23 7/8"L x 4"W x 21 3/4"H
SPLICER SEAT & TOOLBOX
Item # 318017
At approximately 10 lbs, this splicer seat & toolbox is 40% lighter than
traditional wooden models, is molded from durable, impact-resistant
plastic, and impervious to oils, dirt, grease, and a broad range of
chemicals. The opening is large enough to stow your tools inside, but
small enough to prevent them from falling out. The addition of a
padded seat and tool pockets add increased comfort and productivity.
PADDED SEAT FEATURES:
Three inch padded cushion
Large pocket that holds connectors
■ Three tool pockets to store screwdrivers, pliers and other small tools
■ Leather knife sheath with screwdriver holder and quick-release snap
■ Tape holder
■
■
26
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
HOLE-HOG PIERCING TOOL
Item # HH-79
Whether your underground job is tunneling, pipe pushing or pipe
pulling, Allied’s Model HH-79 is a perfect match for your
underground job.
The 3 inch class model HH-79 is an American made, premium
quality tool. It hits hard and runs fast as it delivers high impact
energy for maximum performance. The length-to-diameter ratio
and one piece body design combine to provide a rapid percussion
cycle that drives it straighter and minimizes deflection.
The HH-79 is available with either a pierced or threaded nose with
both versions having a threaded tailpiece.
Model
Outer Dia. Overall Weight Operating
Air
Air Hose Percussion Rate 1/4 turn Reverse
Length
Pressure Consumption Inside Dia.
Per min.
Feature
HH-79
3.1 in. 54.7 in. 75 lbs. 110 psi
45 cfm
3/4 in
440 bpm
Standard
HH-79 TH 3.1 in. 57.9 in. 80 lbs. 110 psi
45 cfm
3/4 in
440 bpm
Standard
HYDRAULIC BREAKERS LIGHT/MEDIUM/HEAVY
Item # HBR40/HBR40 LV (low vibration)
■ Control trigger built into handle
■ Provided with 18" braided whip hoses (order HTMA couplers separately)
■ Standard tool attachment mechanism allows use of all standard tool bits
■ No compressed air exploding into the atmosphere spreading dirt & dust
■ Hydraulic cushioning of return stroke reduces operator shock and fatigue
■ Hand grips at comfortable working height
■ Hydraulic operation provides continuous lubrication of all moving parts
■ Anti-vibration handles standard on HBR48LV
Flow
Optimum Pressure
flow
4-7
4
1200-2000
GPM
GPM
psi
Max back Weight Length
pressure
150 psi 40-48 lbs 25 in
SHOCK RESISTANT DIGGING BAR
Item # ML795-6CB pencil point w/chisel end
Tool steel
Capacity.
1" x4 1/4"
Performance
Whip Hoses
1500 BPM’s
45-55 class
18" w/ 3/8
NPT fittings
NEW
Item # ML795-6 chisel end w/tamper end
The shock resistant digging bar is a new and unique safety tool for the underground utility industries.
When the tool comes into contact with underground energized power lines, its insulator sends the voltage
back to the ground, offering the user the benefit of protection from shock by high voltage.
The digging and tamping ends are forged of high carbon steel, and the insulator is fiberglass reinforced
polyester resin having an AC dielectric strength of 100KV per foot for five minutes when clean and dry.
Special digging bar lengths can be supplied on request. Meets standards of ASTM F-711 and IEEE 987.
Prevents shock up to 100KV■ Length 72 inches ■ Weight 13 pounds ■ 1¼" solid fiberglass shaft
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
27
REPAIR
CALIBRATION
RS POWER REEL
Item # 83660 6"wide reel
Item # 83669 12"wide reel
24 3/4" x 6" ID heavy-gauge welded steel spool reinforced on
exterior facing. Mounts on either 18 9/16" driving spindle connected to 2 7/16" winch shaft or 13 1/4" pole spindle to support
spool at pole side for payout only. Spindle brake hub controls
spool free wheeling. Extra spools available.
CR COLLAPSIBLE POWER REEL
Item # 08136
Mounts on the end of any 2 7/16" (62 mm) winch shaft, or
capstan drive. Holds 1,600 ft. of 1/4" (487 m of 6 mm) wire rope
or up to 200 lbs of weight with a maximum allowable pull of
3500 lbs. Bare Drum (1600 kgs) Spindle has fixed and sliding
spider with six rim segments. Fixed spider, yokes; segments are
heat-treated aluminum alloy. Rated @ 3500 lbs. (1583 kgs) pull;
ID: 20"; Reel O.D.: 28" (expanded), 18 3/4" (collapsed).
Not to be used for storing mule tape or poly rope.
POLE MOUNT SPINDLE
Item # 75985
Equipped with a Ratchet Binder using a 2" wide web to provide a
sturdy temporary attachment to a pole for FIOS/VATS cable reels.
2.5" spindle diameter 24.5" max reel width
24.2 lbs. for gray/black plastic reels
■ Durable, bright yellow powder coat finish for visibility
and corrosion protection.
■
■
3-3/8" RATCHETING CABLE CUTTER
Item # 75250
Cut telcom cables in tight spots.
Here’s the only cutter you’ll need to bite through big telcom cable.
And it’s small enough to get into tight spots that foil bigger cutters.
Specially designed ratchet and huge cutting head give you an enormous mechanical advantage. To make those big cutting jobs even
easier, the ratchet works at two speeds, in both forward and reverse.
To make it last, we’ve used precision ground alloy tool steel,
specially hardened. Measures 18.5" x 6.3" x 1.8" and weighs 3.5 lbs.
28
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
HYDRAULIC CABLE CUTTER
NEW
Item # HLR-125
The HLR-125 is designed to cut 800 MCM hard drawn copper cable. The
HLR-125 is a remote cutter head that requires an external 10,000 psi pumping
source. This tool features a standard 15' Certified non-conductive high pressure
hose, including a screw type coupler. The pole is made from a high strength safety
yellow color fiberglass in order to maintain dielectrical properties. This lightweight tool
is designed with a pivoting head that pivots up to 50 degrees. This pivoting head enables
the operator to access hard to reach areas. A simple turn of the pivoting knob locks the
head in place at any angle up to 50 degrees. Custom lengths available upon request
LOW PRESSURE HYDRAULIC 4” CABLE CUTTER “SHORT-CUT”
Item # CO-5000
This 4" capacity hydraulic cutter’s small size makes it ideal for use in confined areas such as underground vaults. It is ideal for cutting lead shielded
underground cable. An ABS cover is provided to guard the
operator from the moving linkage.
■ For cutting all types of copper and aluminum electrical conductor and
telecommunication cable up to 4" diameter. NOT FOR CUTTING STEEL.
■ Long life cutting blades are made of tough and durable hardened and
ground alloy steel.
■ Mandatory two-hand control.
HYDRAULIC SPEARING TOOL
Item # HCS-400
The HCS-400 is a double acting hydraulic spearing tool. This tool
is designed to drive a piercing blade into the conductor ensuring
that the conductor is out of service prior to beginning work.
A uniquely designed piercing blade guarantees contact when
multi-bundled conductor is spiked. This tool is a closed head
design and features an adjustable sliding guide rod to securely
hold smaller cable.
CABLE SPEARING/SPIKING TOOL UP TO 8" DIA.
Item # HCS-800
Compact and lightweight easy to handle and mount on cable
Utilizes manual or electric hydraulic pump adapts to your available power source
■ Contoured cutting head seats properly on top of cable to be tested
■ Fully retractable blade prohibits metal to metal contact before all safety
precautions are in place
■ Visual depth gauge
■
■
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
29
REPAIR
CALIBRATION
MULTI TENT
Item # 6334A 44" x 44" x 90"H weight 11 lbs
The 5-in-one speciality tent is a single tent which, when used with the
appropriate hardware, can perform multiple functions. The tent may be
attached to a manhole guard, pole, ladder, stand, or bucket truck. Door
style features snap & D-ring closures. Includes strand mounting hardware
(P/N 63350). All other hardware ordered separately.
Bucket Hardware
Item # 63360
Strand Hardware
Item # 63350
Guard Hardware
Item # 63390
Ladder/PoleHardware
Item # 63380
GROUND TENT 6 ft & 8 ft
Item # FX6611 6x6 80"@ peak 69" @ eave
Item # FX8811 8x8 92"@ peak 71" @ eave
Pop-up Shelters for bad weather and sun protection, features one-slit
door with zipper, window and carrying case.
ALUMINUM MANHOLE RINGS
Available in two models 8" and 12" height and 43% lighter than steel
these manhole covers are reversible to fit both standard 27" and 30"
manholes. A watertight seal is formed by inflating to 5-10 lbs. of air and
all sizes are stackable to maintain a dry opening in flooding conditions.
Model
Description
Weight
2730-8A
27" or 30" dia. 8" high
17 lbs
2730-12A
27" or 30" dia. 12" high
20 lbs
3336-12A
33" or 36" dia. 12" high
24 lbs
2750
Inner tube replacement
2 lbs
MANHOLE GUARDS
Furnished with two steel chains and wing bow locking brace to
assure sturdy protection. Painted safety yellow. Freestanding
Model
Description
Material
08043300 Steel Guard
Steel
08043301 Steel Guard w/manhole shield clamps Steel
30
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
J2 CABLE LASHER
Item # 86070
The J2 Cable Lasher is used to lash an overhead cable or numerous
cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. The J2 Lasher’s design also gives it maximum
service life. The body is cylindrical to help it slip more easily through
branches and obstructions. There is a built in mechanical brake to
prevent unintended reversal, an automatic drum lock for easy span
transfers, an all-range tensioning sevice for optimum strand traction
and high strength front and rear gates for tighter lashing.
CALL US FOR YOUR LASHER REPAIRS
WE REFURBISH TO LIKE-NEW CONDITION
800-225-6642
HOWE WIRE TOOL
Strap is made of tough nylon webbing
Swivel hook is forged steel with large opening
■ Shank of hook lengthened to reach under insulator
■ Other end has device to hold the load at any distance
■ All metal parts are galvanized
■ Max. safe load 500 lbs. (225 kg)
■
■
Cat. No.
Description
Weight
1702-20N
nylon strap 1" (25 mm)
wide, 7' (2.1 m) long
1.95 (lbs)
CHICAGO® GRIP - FOR BARE WIRE
Lightweight, especially economical grip
Designed for working with solid and stranded bare wire from .08"
(2 mm) to .20" (5.1 mm)
■ Single "V" groove jaw
■ Other Grips available
■
■
Call Mohawk Ltd. for a full selection of grips.
Cat. No.
1613-30
Approx. Weight Jaw Length
Each
1.50 lbs.
3"
(0.68) g
(76)
Maximum Cable
4 B&S solid .20"
(5.08)
Repair capabilities, pages 4-7.
Maximum Safe
Load lbs
1500 lbs.
(680) g
Minimum Cable
12 B&S solid .08"
(2.03)
WWW.MOHAWKLTD.COM
31
REPAIR
CALIBRATION
LINEMAN’S HOIST 1,000-3,000 LBS.
Little Mule® brand Lineman's hoists are available in capacities of
1,500 and 2,000 pound single line, and 3,000 and 4,000 pound
double line. Typical components include double interlocking
pawls and pawl springs for precision load control, high strength
polyester web strap, and solid fiberglass handle designed to bend
in case of overload. Little Mule Lineman's hoists are available
with standard, hot stick, swivel gate, or hot stick hook and
gate-latch options.
B
B Standard Hook
Model
300-Hook*
322-Hook*
344-Hook*
DB
DB Hot Stick Hook
CB
CB Swivel Gate Hook
DHB
DHB Hot Stick Hook & Gate Latch
Single Line
Double Line
Web Strap
Rated Cap.
Lift Min Hdrm. Rated Cap. Lift
Min Hdrm. Length
(Ft.)
(Ton)
(Ft.)
(In.)
(Ton)
(Ft.)
(In.)
3/4
9 1/4
18
1 1/2
4 1/4
25
10
3/4
14
22
1 1/2
7
26
15
1
11
22
2
5 1/2
26
12
Handle
Length
(In.)
20
24
30
Net
Weight
(lbs.)
11 1/2
11 1/2
13
Ship
Weight
(Lbs.)
12
12
14
* Please specify hook style from above hook choices
CM SERIES 640 PULLER
Item # HST4043 3/4 Ton
Item # HST4045 1 1/2 Ton
The Series 640 is a highly versatile tool that can be used to efficiently pull,
lift, drag or stretch. The weatherized braking system is so reliable, the load
is always under control and can be positioned at any point.
■ Resists malfunction due to dust, grit & water
■ Incorporates hardened steel CM Hoistaloy load chain.
■ Frame and handle are of lightweight aluminum alloy
■ Latch type hooks are of hardened forged steel
■ Load sentry & Anchor Sling are available as options
CERTIFY YOUR HOISTS AND PULLERS
MOHAWK LTD.
CAN REPAIR & CERTIFY A WIDE VARIETY OF HOISTS AND PULLERS
CALL US AT 800-225-6642
32
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
CABLEGLIDER CABLE PULLERS
The Condux CableGlider STD cable puller offers portability
and ease of set up in a completely self-contained unit to
adapt to a variety of pulling situations. It comes equipped
with a two-speed removable power pack, providing up to
6,500 pounds (28,912 N) of pulling force at low speed.
Speed changes are no problem with just a turn of a dial.
Design features include a self-tailing capstan for added
stability, a pivoting arm, and a foot switch for operator
convenience and safety. Accepts all diameter rope
(self-tailing capstan accepts 5 /8" (16 mm) to 7/8"
(22 mm) rope only).
CableGlider STD includes the following items:
■ Puller
■ Foot Switch
■ Retaining Fork
■ Conduit Adapters - 2" (51 mm), 3" (76 mm), 3 1/2" (89 mm), 4" (102 mm)
■ Tool box for the accessories
DUCT RODDERS
Condux duct rodders combine ease of operation and reliable
performance to help increase the efficiency of your rodding
operations. Our duct rodder cages have been designed to be
lighter weight for easy handling in the field. They feature sturdy construction and a hand-operated wheel brake. They can be
used on their side as well as upright. 30" (762 mm) and 45"
(1,143 mm) cages come with flotation wheels for added mobility. Cage sizes are matched to suit the rod you order. Rodders
available from 50' to 1500'.
Mohawk Ltd. carries a full line of rodders, rods, fittings
and grips. Call today with your specific requirements.
POWER DART BLOWER KIT
Item # 08030003 110V Power Dart Blower
Item # 08030004 220V Power Dart Blower
The Power Dart Blower is a pneumatic rodding system especially
suited for long duct runs. It is cabable of delivering up to 300 cfm
of air at 3 psi max pressure, easily blowing 1/2 inch poly line over
2,000 feet in conduit up to 6" in dia. Kit consists of the Power
Dart Blower Unit, Hose, Body Seal-Off & Seal-Offs for 1/2" - 6"
(13 mm-152 mm) Conduit. Weighs only 31 pounds (14 kg) and
operates at 110 or 220 Volts. 110 Volt model includes a 30 amp
twist plug. The 220 Volt model is supplied without a plug. The 220
volt requires a 3,000 Watt generator.
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
33
REPAIR
CALIBRATION
BREAK-AWAY SWIVEL
Essential for fiber optic and coaxial cable pulling, these swivels
have a break load ranging from 150–1,800 pounds (667–8,006 N)
and are designed to separate at + 10% of their rated break load. If
the load rating is exceeded, the interior break pin fractures, the
swivel separates, and the cable remains undamaged. Break Pin is
easily replaceable.
MULTIPLE PULLING HARNESS
Allows staggered attachment to cable or interduct when pulling
through conduit systems or during directional drilling pull-back
operations. Choice of steel cable or chains (varies by model).
Mohawk Ltd. carries a full line of harness configurations.
Call us today with your specific requirements.
MULTIPLE STRENGTH GRIP
FLEXIBLE EYE
Multiple Strength Pulling Grips are designed for pulling ACSR,
aluminum or copper bare conductor, ground wires, messenger
strands, wire rope, and insulated cables. They are ideal for overhead transmission and distribution line
stringing where moderate loading is anticipated. They are economical tools used for attaching conductors
to pulling lines and double socking for conductor-to-conductor connections.
ELECTRIC GENERATOR
Item H1000IS-W
■ 10,000 Watt Generator
■ Portability kit with 13" pneumatic tires and operating manual
■ 20 HP Honda GX620 twin cylinder OHV engine: Electric start
(12 volt 450 CCA battery included), Cast-iron cylinder sleeves,
Low oil protection, Pressure lubrication and spin-on oil filter
■ 7 gallon fuel tank provides 8.1 hours of run time at 1/2 load and
4.2 hours at full load
■ Portability kit with 13" pneumatic tires included
■ Advanced alternator design: No brushes to replace, Rugged allmetal construction, Ball bearings for long life, Rubber isolators
reduce vibration
■ Circuit breaker protection
■ Special features: Idle control saves fuel, Hour meter for
maintenance scheduling, Fuel gauge, Lift kit
34
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
5/8" GROUND ROD DRIVER/EXTRACTOR
Item # ML0005
Drive Rods to ground level without heavy sledge hammers and without deforming the end of the rod. Unit is self contained and easy to transport.Affordable
and safe method for installing ground rods.
Cushioned Handles for Comfort
Weight 14 lbs.
■ Collapsed Length 26"
■ Extended Length 41" (shown extended)
■ Use with all 5/8" Threaded Ground Rods
■
■
VENTILATOR
Item # MEBHP15
Perfect match for confined space applications where a portable lightweight ventilator is desired. Durable steel frame also allows for use in
highway construction settings.
Steel axial ventilator, with a solid spun housing to resist corrosion
and increase performance
■ Attached Hose pack including 15' Hose
■ Lightweight, only 33 lbs, 33" long
■ Power Source: 115vac
■ Airflow: 1,375 cfm
■ Sealed 1/3 hp motor, working in tandem with a high-efficiency
composite fan to promote durability and performance.
■
ALL WEATHER SHELTERS
Shelters include the full complement of options including heat, lights,
110/200 load centers, equipment mounting boards, and much more. The
uses include telecommunication centers, chemical storage shelters, water
treatment enclosures, chlorination shelters and equipment shelters.
Durable Construction with insulated walls custom made up to 10'X 20'
with 7' or 8' height.
Custom features and options available.
Model#
50
100
150
200
300
400
600
Repair capabilities, pages 4-7.
Inside Dimensions L x W x H
29" x 29" x 32"
37 3/4" x 37 3/4" x 48"
36" x 26" x 54 1/2"
45" x 45" x 74"
60" x 60" x 84 1/2"
58" x 46" x 43"
72" x 72" x 84"
Outside Dimensions L x W x H
35" x 35" x 33"
42" x 42" x 49"
42" x 31 1/25" x 55 1/2"
49" x 49" x 75"
64" x 64" x 85 1/2"
62" x 50" x 44"
72" x 76" x 84 1/2"
WWW.MOHAWKLTD.COM
35
REPAIR
CALIBRATION
TOOL ORGANIZERS/HOLSTERS
Work Boxes and Trays are composed of special grades of polyethylene.
They are formulated to have a long useful
service life.
■ Ultraviolet inhibitor
■ Impervious to a broad range of chemicals
■ Unaffected by heavy weight
■ Incinerates 100%
■ Custom interior options available
Impact Wrench Holsters:
CALL MOHAWK LTD.
TODAY FOR MORE
INFORMATION AND OPTIONS FOR
PRODUCTS.
IN-LINE CRIMPING TOOL HOLDER
Item # 219029
NEW
Fully non-conductive wrap-around housing offers maximum protection
Holder will fit most in-line battery operated crimping tools
■ Constructed of high quality plastics with a durable bracket design
■
■
LITE BOX HOLDER
Item # LBH2
Fully non-conductive wrap-around housing offers maximum protection
Design allows Lighthead to be aimed from 50 degrees below horizontal
to 20 degrees past vertical, with nearly a full 360 degrees side-to-side
■ Allows dual use of your rechargeable lightbox as a bucket mount light
■ Bracket-light will mount on the bucket rim with a designed bracket
■ LBH2- For use with lights that have shoulder strap D-rings
■
■
HEAVY DUTY EQUIPMENT TRAY
Safely lifts heavy duty equipment for easy removal and installation
including CATV batteries, fusion splicers, tool holders and splicing trays.
Ergonomically designed with worker’s safety in mind. Safely lifts up to
90 lbs.
36
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
SAFETY VEST ANSI CLASS 3
Item # VPKAMGLI 2V ADJ Small (Small-Large)
Item # VPKAMGLI 2V ADJ X-Large (X-Large-XXXXLarge)
Class 3 garments provide the highest level of visibility and are
intended for workers who face serious hazards and often have
high task loads that require attention away from their work.
3.65 oz breathable, extra durable
100% knit polyester high visibility lime material with
matching high visibility trim all around.
■ 2" high gloss lime/yellow reflective tape on front and back
■ Full velcro front closure
■
■
WORK GLOVES
(A) Item # 1938
(B) Item # 101
(C) Item # 1927
(D) Item # IJL6133
(D) Item # B571DE
A
Reflective Safety Cold Weather Work Gloves
Deerskin Gloves
Leather Palm Work Gloves
Leather Gloves-Lined
Leather Gloves-Unlined
C
B
D
SAFETY GLASSES
Item # S1603
Item # S1604
Item # S1600X
Black frame/shaded lens
Black frame/mirror lens
Black frame/clear lens
HELMET LINERS
Item # SS550
Shoulder-length liner offers split, double-long nape which straddles
the shoulder and tucks under outer jacket. Rugged construction and
extra heavy sheepskin-like lining provide maximum warmth in the
coldest environments. Covers both front and back of neck.
Item # 697118
Extended neck, two-ply liner with flame retardant shell, soft lining,
adjustable Velcro® chin strap and three button loop straps.
Minimum quantities may apply.
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
37
REPAIR
CALIBRATION
GOLIGHT RADIORAY® W/WIRELESS REMOTE
Item # 7901
From stormy roadside emergencies at 2am to rainy late-night repairs,
to moonless nights on the water, power is the first priority in lighting.
Combining a revolutionary five sided parabolic reflector with an axial
filiment Phillips® bulb Cr5 Pentabeam™ technology generates an
extremely bright, virtually perfect beam of light to eliminate dark spots
and reach distances of up to one-half mile.
Cr5 Pentabeam™ Technology
370° Rotation x 135° Tilt
■ 5.5 Amps
■
■
Remote controlled operation
400,000 Candle power
■ 3 year Limited Warranty
■
■
NEW
VISULITE FLEXIBLE LIGHTING
See it Bright, Day or Night
The first-ever illuminated vehicle window decal using CeeliteTM TechnologyPATENT PENDING
Size: 4" (H) x 24" (L) and only .09mm Thickness
Voltage: Low power draw
■ Visibility: Even in bad weather vibrant and clear with no glare
■ Durable: Shatter proof
Operating Temp: -13° F ~122° F (-25° C ~ 50° C)
Storage Temp: -40° F ~ 176° F (-40° C ~ 80° C)
■ Simple Install: Connect power wire, adhere to window surface
■ Customize: Customize with lettering, numbers, logos and colors
■
■
REFLECTIVE SIGN KIT/PADDLE SIGNS
Item # C 1902- C/48RR
C-Stand Warning Kit includes C-902 stand,
48" Roll-up Reflexite C-Sign with three flag
holder & storage case (specify legend) and
three 18" x 18" FROV-1 16/24 fluorescent
warning flags.
Reflective High
Visibility
Paddle Signs
Call for available legends.
38
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
STREAMLIGHT SEPTOR
Item # 61052
The combination of brilliant LED’s in this headlamp places this new
Septor in a class by itself. Constructed of virtually indestructible polymer and equipped with seven, super-bright LED’s, each with a life of
100,000 hours, it ensures trouble free lighting.
■ 90-degree tilting head
■ Water resistant
■ Weight: 5 ounces
■ Adjustable head strap
■ Rubber hard hat strap and cloth strap
PROPOLYMER LED/LUXEON SERIES
These lightweight, affordable, alkaline battery-powered personal lights
are extremely durable, long-lasting, and powerful.
Available in 4AA and 3C configurations.
Viturally indestructible, non-conductive polymer with a
scratch-resistant lens for impact & shock resistance
■ Unbreakable polycarbonate lens
■ Convenient tailcap on/off/blink switch
■
SURVIVOR SERIES
A tough, durable, portable lantern certified for hazardous locations
with right angle head designed to clip on to gear for easy hands-free
use.
Unbreakable Lexan lens with silicone anti-scratch coating
Raised switch for easy operation
■ Nickle-cadmium rechargeable battery
■ Rechargeable up to 1,000 times on 110V, 120V, 230V, 240V or
DC chargers
■
■
STREAMLIGHT LITEBOX
High intensity halogen beam available in spot or flood
Rugged high-impact ABS thermoplastic body is tightly
sealed for wet conditions
■ Optional long-life 10 Ah zero maintenance sealed
rechargeable battery provides over 8 hour run time
■ Rechargeable up to 500 times
■
■
Candlepower
Repair capabilities, pages 4-7.
8W Spot - 80,000
20W Spot - 105,000
WWW.MOHAWKLTD.COM
39
REPAIR
NEW
CALIBRATION
V!SA CONFINED SPACE GAS MONITOR
A robust and accurate portable gas detector, the V!SA provides unrivalled
protection in confined space applications with audible and visual alarms in the
event of exposure to Flammable or Toxic gases. Detecting and displaying up to 5
Gases simultaneously using "plug and play" sensor technology, the V!SA is
suitable for a host of applications in a variety of industries.Pre-entry checking
can be carried out with the internal sampling pump, and diffusion operation
ensures maximum battery life in confined spaces.
Robust Hi Visibility Housing
95 dB Audible and 360 degree visual alarm
■ High, Low, STEL and LTEL alarm
Optional Internal pump
Optional Datalogging
■ Single button operation
■
■
■
■
MULTI-FUNCTION GAS DETECTOR
The GMI - GT range of instruments combine quality, ruggedness and advanced
GMI Technology in a user friendly, hand held gas detector. The multi-application
GT series will satisfy all your gas detection requirements in a single, easy to use
instrument.
Multi-application Gas Detector.
PPM, LEL and Volume flammable gas ranges for leak detection.
■ 0 - 36" water gauge for tightness testing.
■ Manual/Automatic datalogging.
■ Audible/Visual ‘Geiger’ (Ticker) indication on ppm range.
■ Loud audible and high visibility alarms.
■ Large button operation with simple display prompts.
■ Integral torch lighting.
■ Alkaline or Rechargeable battery options. Charging via simple plug or docking
station.
■ Rugged polycarbonate case, sealed to IP54 rating and suitable for outdoor use.
■
■
MAINTAIN YOUR GAS METER AND HAVE IT CHECKED YEARLY
YOUR LIFE MAY DEPEND ON IT
MOHAWK LTD.
REPAIRS & CALIBRATES A WIDE VARIETY OF GAS DETECTORS
SEE PAGE 4 FOR SUPPORTED MODELS
CALL US AT 800-225-6642
40
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
POLE TRAILER
Item # IPT Series
Transports single or multiple utility poles
■ Frame: 10" channel
■ Tongue: Available with telescoping or fixed tongue
■ Brakes: electric or hydraulic
■ Lights: all lights sealed beam-rubber shock mounted
■ Reflectors: all metal clad ICC/DOT approved
■ Wiring: all connections soldered/heat shrink covered
■ Axle capacities: 6,000# GVWR to 30,000# GVWR
■ Additional features and options available
SELF-LOADING SINGLE REEL CARRIER
Item # ICH Series
Multi-pocket spindle bar rack with spring suspension
Replaceable UHMW wear pad on frame for protection
during reel travel
■ 2(ea) hand pumps with built in reservoir to operate
twin cylinders on 5' spindle bar racks independently
■ ID holder
■ Reel capacity: 65" x 120"
■ Stabilizer jacks
■ 12 volt electrical/hydraulic lift.
■ GVWR: 6,000, 8,000, 10,000, 12,000, or 15,000
■ Hydraulic rewind optional
■ 5" x 8" rubber wheel chocks with holders
■ Additional features and options available
■
■
COMBINATION TRAILER
Item # ICC/ICP Series
Combination trailer for poles, reels and miscellaneous
material
■ Frame: ICC - 6" / ICP - 8" steel channel, cold formed
frame and tongue 6" x 6" x 1/4" tube
■ Hitch: 1/2" formed steel plate, 5 positions adjustable
Fenders: formed 12 gauge steel
Safety Chains: (2 ea) 36" with galvanized hook and safety clasp
■ Jack: 7,000# or 12,000# - drop leg or flip-up style
■ Lights: all lights sealed beam rubber shock, flush mounted
■ Reflectors: all ICC/DOT aluminum clad
■ Wiring: color coded in conduit with access boxes, connections soldered/heat shrink covered
■ GVWR: ICC - 6,000# or 8,000#; ICP - 12,000# or 16,000#
■ Additional features and options available
■
■
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
41
REPAIR
CALIBRATION
FIBER OPTIC SPLICING TRAILER
Item # ML610FOT/ML712FOT/ML812FOT
Fiberglass reinforced plywood (FRP) construction
provides maximum durability, superior thermal and
noise insulation, low maintenance and extended life.
■ Smooth interior and exterior walls are seamless and
free of fasteners
■ Structural aluminum frame and trim provide the
ultimate in corrosion protection
■ Dexter “TorFlex” torsion axles offer superior
suspension and handling
■ On board generators/ship-to-shore power, 12V Systems
■ 6’x10’, 7’x 12’, 8’x12’ and custom sizes
■ Additional features and options available
V-NOSE FIBER OPTIC
SPLICING TRAILER
Item # ML610VFOT/ML712VFOT/ML812VFOT
More work and storage space
Aerodynamic configuration greatly reduces wind
resistance
■ Increased fuel efficiency
■ Added flexibility for interior work and storage
configuration
■ 6’x10’, 7’x 12’, 8’x12’ and custom sizes
■ Additional features and options available
■
■
FIBER RESTORATION TRAILER
Item # ML820FRT
A self-contained mobile central office facility providing
switching, power and equipment in support of new plant
installation and emergency restoration of fiber optic and
copper communications systems.
■ On-board electric power generators
■ Auxiliary power inputs include pin and sleeve type
shore connections
■ Cable access ports
■ Complete equipment and cable grounding system
■ Interior climate control
■ Communications infrastructure
■ Additional features and options available
42
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
20’ HOTSTICK STORAGE/WORK TRAILER
Item # MLTM820TA3
GVWR: 9,950 lb.
Curb weight: 5,000 lb.
■ Double rear doors with cam locks
■ Onan industrial/commercial generator
■ Front bulkhead shelf unit, 3 open shelves w/high front lip
■ 94" shelf unit, open bottom w/3 ea shelves with high lip
and top (bin storage)
■ Steel top work bench w/side leg, 5" vise, double drawer
tool box unit positioned under metal top work bench
■ 14' open top wheel well storage box
■ Wall rack storage for hot sticks, includes 24 ea. cushioned
support brackets mounted on 6 ea. "Unistrut" uprights,
fully adjustable (customer supply specific hot stick
storage requirements)
■ Additional features and options available
■
■
GAS/ELECTRIC UTILITY RESTORATION/COMMAND TRAILER
Item # MLRS832TS70
Custom designed
Complete self-sufficient unit
■ On board power systems AC/DC
■ Interior/exterior storage
■ Work stations
■ HVAC systems
■ Communications systems
■ Audio, video, and data systems
■ Public address systems
■ Water systems
■ Lighting systems
■ Additional features and options available
■
■
Mohawk Ltd. is proud to be awarded GSA Contract Number GS-30F-0014R
for Mobile Command Centers.
For additional information please visit our website at www.mohawkltd.com
or GSA Advantage, the Federal Government's premier online shopping tool at
www.gsaAdvantage.gov.
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
43
REPAIR
CALIBRATION
PISTEN BULLY
ITEM # 100U
The PistenBully 100 Utility is a vehicle for all seasons in any terrain. Low ground pressure enables
work in sensitive areas. Optional front and/or rear
mount 3-point hitch combined with a hydraulic PTO
makes the 100 Utility perfectly suited for specialized
tasks such as mosquito abatement, clearing right of
ways, most low pressure applications. It provides the
operator with a comfortable work area, with no
fatigue even on lengthy journeys. The tiltable semicircular steering wheel is convenient to use and can
be easily positioned.
PISTEN BULLY SCOUT
NEW
Item # PB Scout
The PistenBully Scout is light weight and agile.
The 5 person cab is vibration isolated and insulated
with integral roll over protection.
The PistenBully Scout features an industrial V-6
Vortec engine from General Motors, with 105 horsepower and 243 ft lbs of torque. The Scout has hydrostatic drive with single joystick steering. Pilot pressure
enables sensitive and finite control even at very low
engine RPMs. This advantage becomes apparent when
maneuvering onto a trailer. The final drive and
sprocket assembly are engineered to provide years of
dependable service. The Scout has plenty of power for
transporting personnel and equipment.
ALL TERRAIN FLEXMOBIL
Item # PB 100 Flexmobil
The 100 Flexmobil from PistenBully masters the off
road at speeds of up to 25 mph making it ideal for
fire fighting or rescue efforts. Active suspension is
the key for higher speeds in rough terrain. With a
design patterned from military battle tanks, the 100
Flexmobil has 10 sets of twin idler wheels to
compensate for even the most extreme differences
in terrain.
44
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
ADDITIONAL PRODUCTS AVAILABLE
Aerial Closures
Aerial Tools and Equipment
Air Compressors
All Terrain Vehicles
Amp Tools
Barricade Lights
Barricades
Batteries
Binders
Blankets
Boots
Bucket Accessories
Buttsets
Cable Blocks
Cable Cutters
Cable Lashers
Cable Reel Carriers/Trailers
Cable Sheath Slitters
Cable Strippers
Cable Ties
Chain Hoists
Chain Saws
Chargers
Combination Trailers
Command Centers
Compressors
Conduit Carriers
Cones
Cord Kits
Custom-Built Enclosed Trailers
Diamond Tipped Cutting Blades
Drills
Drill Bits
Duct Rodders
Ear & Eye Protection
Equipment Trailers
Eyewear
Fiber Optic Splicing Trailers
Fiber Optic Test Sets and Tools
First Aid Kits
Floor Drawers
FTTH Products
FTTP Products
Gas Detectors
Gear Reducers
Generators
Gloves
Grips
Handsets
Hard Hats
Hard Hat Lights
Harnesses
Headsets
Headwear
Heaters
Helmet Liners
Hoists
Hooks
Hoses
Hot Sticks
Hydraulics
Impact Wrenches & Accessories
Installation Tools
Inverters
Knives
Ladder Racks
Lanyards
Lights
Location Devices
Magnetic Flood Lights
Mandrels
Manhole Guards & Rings
Measuring Sticks
Meters
Modem Line Testers
Multigas Detectors
Personal Safety Alarm Systems
Pickup Storage Boxes
Pole Bits
Pole Carriers
Pole Guards
Pole Pruners
Pole Saws
Poly Tags
Pole Trailers
Portable Compressors
Pouches
Power Dart Blower
P-Phones
Protective Clothing
Pullers
Pumps
Rainwear
Reeling Equipment
Reciprocating Saws
Reels
Regulators
Safety Equipment
Safety Glasses
Safety Vests
Scissors
Shelters/Tents
Shovels
Signs
Snips
Snow Grooming Equipment
Sockets
Soft Covers
Splicing Tools
Straps
Tampers
Tents
Test Equipment
Test Sets
Tie Wraps
Tone Sets
Tool Bags, Holders & Trays
Umbrellas
Underground Equipment
Vests, Safety
Voltage Detectors
Warning Signs
Wheel Chocks
Winch Line Blowers
Work Lights
IF YOU’RE LOOKING FOR A PRODUCT NOT SHOWN ABOVE,
PLEASE CALL US! WE’LL FIND IT FOR YOU.
800-225-6642
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
45
REPAIR
CALIBRATION
ADDITIONAL MANUFACTURERS SUPPORTED
3M
A.B. Chance Company
ADK
AMP
Able 2 Products Company
Adrian Steel
Aircraft Dynamics
Allied
Altec
Black & Decker
Bosch
Brief Relief
Brinkman
Buckingham MFG.
Burndy
C&M
Cable Prep
Coffing
Communications Technology Corp.
Concoa
Condux
Cooper Tools
Cyclone
D&O
Danielwoodhead
Dielectric
DeWalt
Fairmont
Flygt
Eastern Metal
Fluke
FOF Incorporated
Gas Measurement Instruments Ltd. (GMI)
Gast
General Machine Products Company (GMP)
Greenlee Textron
H.K. Porter
Harris
Hastings
Heritage Cutlery
Hilti
Hitachi
Ilsintech
Ingersoll-Rand
Jameson
Jonard/OK
Kässbohrer
Kiefer Industrial
Klein Tools
Lemco
Little Mule
Lug-all
Megger
Metrotech
Metro Tel Corp.
Milwaukee
Mine Safety & Appliance (MSA)
Mopeco
Neese Industries, Inc.
North
Noyes
Nupla Corporation
OK Industries
Oshkosh
Parkway Systems Engineering Inc.
Pelsue
Petro Comm Industries Ltd.
Plantronics Inc.
Plastic Techniques
Progressive Electronics
Pro-line
Prosser
Pupco
PureGas
Ratcliff
Salisbury
Sauber
Sho-me
Sioux
Stancor
Stanley
Stihl
Streamlight
Telsta
Tempo
Thomas & Betts Corp.
Tyton
Uvex
Westek Electronics Inc
Western Progress
Wilcom
Yale Hoists
LOOKING FOR A REPAIR CENTER TO SUPPORT
YOUR PRODUCT LINE? CALL TODAY
46
ORDERING INFORMATION:
Contact sales at 800-225-6642.
REPAIR
CALIBRATION
PRODUCTS
CONTACTS
Connecticut, Westchester, New York City, Long Island, New Jersey
Burt Seymour, Sales Representative, ext. 230 or cell (315) 525-2250
Donna Gonser, Inside Sales & Customer Care, ext. 249
New York (Upstate)
Mike Fuller, Sales Representative, ext. 283 or cell (315) 794-3411
Donna Gonser, Inside Sales & Customer Care, ext. 249
New England States, ME, NH, VT, RI, MA
Pennsylvania, Virginia, West Virginia, Maryland, District of Colombia
Cliff Rose, Sales Representative, ext. 260 or cell (315) 794-7853
Donna Gonser, Inside Sales & Customer Care, ext. 249
All Other States and International Sales
Randy LeFave, National Account Manager, ext. 252 or cell (315) 794-6933
Joe Maggi, Inside Sales & Customer Care, ext. 245
Fleet Custom Trailer Sales
Kim Ellis, Fleet Product Manager, ext. 248
Stu Gerow, Fleet Sales Representative, ext. 262
Snow Grooming Equipment Sales & Service
Bill Brandt; Sales Representative, ext. 261; (518) 696-4874
Kathy Cianfrocco, Inside Sales & Customer Care, ext. 265
Utility CAT Sales Representative
Brian McNamara, ext. 276
Pisten Bully Service Department: (315) 737-5456
Fax (315) 737-8922
Pisten Bully Business Office: (315) 737-5456
Fax (315) 737-8922
Dave Gray, Sales Manager, ext. 263 or cell (315) 525-2008
Suzanne Bakiewicz, VP Sales & Marketing, ext. 251
One Newell Lane
PO Box 340
Chadwicks, NY 13319
1-800-225-6642, 315-737-7328
Web Site: www.mohawkltd.com
Repair capabilities, pages 4-7.
WWW.MOHAWKLTD.COM
47
ISO 9001:2000 Certified
The One Stop Source for
Repair, Calibration and Supply of
Outside Plant Equipment
Electronic & Test Equipment
Hydraulic/Pneumatic/Mechanical/Battery Tools
Construction Tools and Equipment
Safety Equipment
Utility Trailers and Tracked Vehicles
Factory Trained/OEM Authorized Repair Center
www.mohawkltd.com
800-225-6642
Certified Woman-owned Business Enterprise