SERVING YOUR NEEDS PREFERRED LIGHTNING PROTECTION 2100 East First Street Maryville, Missouri 64468 Toll-Free: 866-299-7406 Fax: 660-582-2603 Manufacturer of UL Listed Products Manufacturing Member of the Lightning Protection Institute Letter of Introduction Dear Valued Customer: Preferred Lightning Protection Inc. is pleased to present our newest catalog. In this edition, we have added several new products and product lines to better serve your needs. We have developed labor saving quality materials at competitive prices. Our products exceed the requirements of Underwriters Laboratories and bear the UL mark and are designated in the description. Our products are listed in both the United States and Canada. Preferred Lightning Protection Inc. is a full service manufacturer focusing on the needs of our customers. Our production plant has all the necessary equipment to produce the quality parts you need at the time you need them. Preferred Lightning Protection Inc. carries an extensive supply of inventory to guarantee you the fastest possible delivery. Recently, we added a full line machine shop to our production plant to help with your custom needs. We have also upgraded our foundry operation and added new cable machines to help expedite order processing. Our services also include design and installation. We have well-trained designers who have passed the top levels of the Lightning Protection Institute requirements. All our installations are supervised by an LPI Master Installer/Designer to insure quality. Our design team and installers can coordinate to help meet specific requirements for any job. Let us worry about the problems. Thank you for your interest in our product line. We are always ready to answer any questions and help with your specific needs. Thank you, Ken Pettlon Ken Pettlon II Kris Pettlon President Vice President Vice President Three Generations Strong 6th Edition 2013 TABLE OF CONTENTS General Information .............................................................. Pages 3-4 Specifications ....................................................................... Page 5-11 Conductors ....................................................................... Pages 12-16 Threaded Rods, Bus Bar & Other Solid Bars ................... Pages 17-19 Air Terminals .................................................................... Pages 20-24 Air Terminal Accessories, Couplings, Swivels.................. Pages 25-34 Bases ............................................................................... Pages 35-49 Splicers & Bimetallics ....................................................... Pages 50-57 Bonding Clamps ............................................................... Pages 58-67 Thru-wall/Thru-roof Accessories....................................... Pages 68-82 Grounding & Protector Pipes ............................................ Pages 83-98 Fasteners (loops, clips, nails, screws) ............................ Pages 99-110 Adhesive ....................................................................... Pages 111-112 Accessories .................................................................. Pages 113-116 Industrial Stack Equipment ........................................... Pages 117-127 Surge Protection ................................................................... Page 128 Compression Connectors………………………………… Pages 129-131 Compression Tools ...................................................... Pages 132-141 Exothermic Accessories…………………………………….Pages 142-149 Exothermic Connections............................................... Pages 150-161 Technical Information ................................................... Pages 162-167 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GENERAL INFORMATION Understanding Your Needs We understand the importance of quality materials and fast delivery. We have used our 80+ years of experience in the field to develop labor saving products with the highest quality. Our plant capabilities allow us to meet all material, service and delivery demands. Plant Capabilities and Modifications We are a full service manufacturer specializing in your needs. We have an on-site foundry, point swaging operation, threading operation, punch press machines, cable stranding capabilities, a plating facility, and metal fabricating machines. Our capabilities allow us to produce any part, standard or customized, to meet your needs and to have fast turnaround on your order. Design and Installation Services Our experienced designers are willing to work with you and design a system that meets the requirements of UL, NFPA, and LPI. We have the modern capabilities to produce drawings and quotes efficiently and accurately. Need help with installation? Our staff is ready to answer any questions about installations. We also offer an installation service to help you. An LPI Master Installer/Designer supervises all our installations. Pricing Prices are not included in this catalog, but a price sheet will accompany the catalog upon request. Prices are subject to change without notice and are FOB: Maryville, MO. Freight is prepaid and added to your invoice, unless freight allowance terms are met. Shipping Information and Freight Terms We make every effort to process and ship your order the same day we receive it. We will ship your order using the fastest, least expensive method. Orders can be shipped using your account and carrier if requested. We will track your order from our plant to your destination. All shipments are FOB: Maryville, MO unless the allowance terms are met. Freight will be allowed on orders exceeding $3,200.00. Freight allowance is within the continental U.S. and for ground shipments only. Ordering Use the catalog number and description in the catalog. Be sure to specify the point size (3/8”, 1/2”, or 5/8”) when ordering and add all prefixes and suffixes, according to each part. We reserve the right to substitute parts pictured in our catalog with industry equivalents. Credit Terms Our terms are Net 30 days, with an approved credit line. Until credit is established, orders will ship with a payment in advance, COD or credit card. Please call for a credit application. An 18% APR will be applied to past due accounts. Returns and Restocking Charge If you need to return items, please call for an authorization and instructions. In some cases a 25% restocking charge will apply. Custom fabricated parts may not be returned. Claims Check your shipment against the packing slip as soon as it arrives. Damaged or shorted deliveries should be noted on the transporter’s delivery receipt and reported directly to the transporters. Preferred Lightning Protection Inc. is not responsible for damaged or shorted goods in transit. If we made an error, notify us immediately and we will correct it. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GENERAL INFORMATION Quality Assurance All our products are manufactured to the highest standards. We guarantee against defects in materials and workmanship for a period of one year from the shipment date. Defective materials will be replaced free of charge. If you are not completely satisfied with an item, simply return it and we will replace it, credit your account, or refund your money. We participate in the UL Master Label Program. All our products are UL listed in the U.S. and Canada and are regularly re-inspected as part of the program. Additionally, all products exceed the requirements of the National Fire Protection Association (NFPA) and Lightning Protection Institute (LPI). We are members of the NFPA and LPI. Made in the USA Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SHORT SPECIFICATIONS Part 1 General 1.1 Scope of Work A. Under this section of the specifications the contractor shall furnish all labor, materials, tools and equipment required for the completion of a functional system of grounds, conductors, air terminals, and other component parts for protection against damage by lightning in accordance with the current editions of all codes, standards, and regulations. 1.2 Codes, Standards, and Regulations A. NFPA 780 standard for the installation of lightning protection systems B. UL 96 lightning protection components C. UL 96A installation requirements for lightning protection systems D. LPI 175 standard of practice for the Design-Installation-Inspection of lightning protection systems 1.3 Submittals A. Shop drawings indicating the location, size, and means of support for air terminals, bonding connections, conductors, and grounding shall be submitted to the architect and engineer for approval. 1.4 Quality Assurance A. The Lightning Protection System shall conform to the requirements and standards for Lightning Protection Systems of UL, LPI, and NFPA. Upon completion, the application for the UL Master Label shall be submitted to UL. B. A qualified Lightning Protection contractor listed with UL and under the supervision of an LPI Certified Master Installer shall be required for the installation of the Lightning protection System. Part 2 Products 2.1 Acceptable Manufacturer’s A. Preferred Lightning Protection Company 2100 E. First Street Maryville, MO 64468 Phone 660562-2771 B. Approved equals 2.2 Materials A. All components shall be new and of a design and construction to suit the application. B. All components shall conform to the requirements of UL 96A and NFPA 780 for the structure. C. All components shall be Aluminum, Copper, Bronze, or Stainless Steel. D. Components shall not be installed in locations where corrosion of dissimilar metals may occur. Part 3 Execution 3.1 Installation A. Install in accordance with the manufacturers design. B. Install in accordance with the requirements of current editions of UL 96A, NFPA 780, and LPI 175. C. The Lightning Protection System shall be installed in a neat and inconspicuous manner so all components blend with the building appearance. D. All required sealing, flashing, pavers, slip sheets, or pads required for the Lightning Protection System shall be furnished and installed by the roofing contractor so as not to void the warranty. E. All trenching, backfilling, and compacting required for the grounding system shall be provided by the general contractor. F. A surge protection device conforming to the current edition of UL1449 shall be installed on the electrical entrance by the electrical contractor. G. Surge protection for telephone, radio, antennas, CATV, CCTV, data lines, satellites, and service entrances shall be installed by the system provider. 3.2 Field Quality Control A. Upon completion of the installation, the UL Master Label shall be obtained for the structures. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS PART 1 – GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 1 Specification Sections shall apply to this Section. Other Specification Sections that directly relate to the work of this section include, but are not limited to the following: Grounding and Bonding Surge Protection Devices 1.2 SUMMARY This specification for the lightning protection system is intended to be a performance type specification for furnishing the design, labor, materials and services required for the completion of a functional and unobtrusive lightning protection system consisting of air terminals, conductors, grounds, and other component parts for complete coverage of the building(s) or structures against damage by lightning, as indicated on the contract documents. The system shall provide safety for the building, building contents and occupants by preventing damage caused by lightning. The lightning protection system shall be installed by a firm actively engaged in the installation of Master Labeled Lightning Protection Systems and shall be so listed by Underwriters Laboratories Inc. The system(s) shall be designed and installed in accordance with NPFA 780, UL 96A, LPI 175 and the requirements of State and Local Codes and Regulations. 1.3 SUBMITTALS Product Data Provide manufacturer’s technical data of features, performance, electrical characteristics and finishes for each type of product indicated. Examples include grounding down conductors, thru-roof/thru-wall assemblies, roof conductors, air terminals, and other necessary components. Shop Drawings Provide the system layout designed specifically for the building(s) or structures included in the contract drawings along with details of how the products are to be used in the installation. Show the type, size, and locations of grounding down conductors, thru-roof/thru-wall assemblies, roof conductors and air terminals. The shop drawings shall include indications for use of raceway for concealment of system downleads. Shop drawings shall be submitted to the Architect or Engineer for approval prior to commencement of the installation. Certification or Qualification Data Submit evidence of qualifications to the Architect or Engineer. This may include UL Manufacturer’s Listing, UL Installer’s Listing, and/or LPI Master Installer Designer Certification. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS 1.4 QUALITY ASSURANCE Designer’s Qualifications An LPI Master Installer/Designer shall complete the design of the system. Installer Qualifications Installation of the system shall be completed by a UL Listed Lightning Protection Installation Company and shall be under the supervision of an LPI Master Installer/Designer. 1.5 CODES, STANDARDS AND REGULATIONS The completed lightning protection system shall comply with the latest issue of the following standards and form a part of this specification. National Fire Protection Association NFPA 780 - Standard for the Installation of Lightning Protection Systems Lightning Protection Institute LPI 175 – Standard of Practice for the Design, Installation & Inspection of Lightning Protection Systems Underwriters Laboratories UL 96 – Lightning Protection Components UL 96A – Installation Requirements for Lightning Protection Systems 1.6 COORDINATION The installation of the lightning protection system shall be coordinated with other building trades to insure a correct, neat and unobtrusive installation. Coordinate with the roofing contractor prior to installing any roof penetrations, fasteners, or adhesive(s) on the roof. The roofing contractor shall be responsible for sealing and/or flashing all lightning protection roof penetrations per the roof manufacturer’s recommendations. The lightning protection contractor shall use a compatible adhesive to adhere components to the roof when required. Prior to the installation, the lightning protection contractor must obtain approval of the compatible adhesive from the roof manufacturer/contractor. Should the roofing manufacturer/contractor require any special walk pads, membrane patches, pavers, etc. under the components of the lightning protection system, it shall be the responsibility of the roofing contractor to furnish and install such items. The lightning protection contractor shall be responsible for marking the locations of conductors and other components that would require such items. The lightning protection installer shall assure a sound bond to the main water service and to assure interconnection with other ground systems. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS PART 2 – PRODUCTS 2.1 STANDARDS The system furnished under this specification shall be the standard product of manufacturer’s regularly engaged in the production of lightning protection equipment and shall be the manufacturer’s latest approved design. The equipment shall be UL Listed and properly UL Labeled for use in lightning protection systems. All equipment shall be new and of a design and construction for the application in which it is used in accordance with accepted industry standards and UL, NFPA and LPI code requirements. 2.2 ACCEPTABLE MANUFACTURERS Subject to compliance with requirements, provide materials by one of the following: Preferred Lightning Protection Company – 2100 E First St, Maryville MO 64468 Phone: 660-562-2771 Email: sales@preferredlp.com Approved Equals 2.3 LIGHTNING PROTECTION SYSTEM COMPONENTS Materials All materials shall be aluminum, copper and/or bronze and of the size, weight, and construction to suit the application and used in accordance with UL, NFPA and LPI code requirements. Class I sized components shall be used on roof levels 75 feet and below in height. Class II sized components shall be used on roof levels exceeding 75 feet in height. Bolt tension connectors and splicers shall be utilized on Class I and Class II structures. Compression fittings are acceptable only on Class I structures. All mounting hardware shall be stainless steel to prevent corrosion. Copper materials shall not be installed on aluminum surfaces including Galvalume, galvanized steel, zinc or any painted steel. Aluminum Components Aluminum materials may not be used except on roofs that utilize aluminum, galvalume, galvanized metal roofing or painted steel components. On these roofs or where parapets of these materials are present, the entire roof lightning protection system shall utilize aluminum materials to ensure compatibility. Where an aluminum lightning protection system is present, a bimetallic transition shall occur at the thru-roof assembly so that copper components can be utilized for downleads and grounding. Air Terminals Air terminals shall be of solid construction and shall project a minimum of 10 inches above the object or area it is to protect. Air terminals shall be spaced at intervals not exceeding 20’-0” along ridges and around the perimeter of flat or gently sloping roofs (roofs with a pitch of less than 3:12). Flat or gently sloping roofs exceeding 50’-0” in width shall be protected with additional air terminals spaced at 50’-0” maximum intervals. Air terminal shall be located within two feet of roof edges and outside corners of protected areas. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS Air terminals shall be installed on mechanical units, stacks, flues and other metallic objects not located within a zone of protection and with metal thickness of less than 3/16 inch. Metallic objects having a thickness of 3/16 inch or greater shall be bonded to the lightning protection system with using main-size conductor and a bonding plate with a minimum of 3 square inches of surface contact area. Air terminal bases shall be securely fastened to the structure in accordance with the specified standards. Installation methods include the use of adhesive that is compatible with the mounting surface or stainless steel fasteners. Installation of the air terminal base shall be coordinated with the roofing contractor so as not to void the roof warranty. Main Conductors Main conductors shall be sized in accordance with the specified standards for Class I or Class II structures and shall provide a two-way path to ground for each air terminal. The conductor shall maintain a horizontal or downward path from the air terminals to the connections with the ground system. Conductors shall be free of excessive splices and shall be secured at 36 inch maximum intervals. Conductors shall be installed so that no bend of the conductor is less than 90 degrees nor has a radius of bend of less than eight (8) inches. Down Conductors Down conductors shall be sized in accordance with the specified standards for Class I or Class II structures and in no case shall be smaller than the roof circuit. Down conductors shall be spaced at intervals averaging not more than 100 feet around the perimeter of the structure. No structure shall have fewer than two (2) down conductors. Where down conductors are installed exposed on the outside of a structure and are subject to damage or displacement, they shall be protected with conduit a minimum of six (6) feet above grade. Conductor inside metallic conduit shall be bonded at each end. Steel Frame Construction In case of structural steel frame construction, down conductors may be omitted. Roof conductors shall be connected to the structural steel framework at intervals averaging not more than 100 feet around the perimeter of the structure. Roof Penetrations Roof penetrations required for down conductors or for connection to structural steel framework shall be made using thru-roof assemblies. Conductors shall not pass directly through the roof. The roofing contractor shall furnish and install the materials required to properly seal all lightning protection roof penetrations. Ground Terminations Ground electrodes (rods) shall be copper clad steel, 3/4" diameter, 10 feet in length. A ground electrode shall be provided for each down conductor. The connection between the down conductor and the ground electrode shall be made with a mechanical ground rod clamp having a minimum of 1-1/2” of contact measured parallel to the axis of the ground electrode or by an exothermically welded connections. Ground electrodes shall be located a minimum of one (1) feet below grade and two (2) feet from the foundation wall.+ Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS Where structural steel framework is used as the down conductor, ground terminals shall be connected to columns around the perimeter of the structure at intervals averaging not more than 60 feet. Columns shall be grounded using either bonding plates having eight (8) square inches of surface contact area or by exothermically welded connections. All ground electrodes shall be interconnected with a ground loop conductor on structures that exceed 60 feet in height. The ground loop shall be sized in accordance with the specified standards and in no case shall be smaller than the main roof conductor. Equipotential Grounding Common interconnection of all grounded systems within the building shall be ensured by interconnection with the lightning protection system using main size conductor and fittings. This interconnection shall include but is not limited to the electrical service, telephone and antenna system grounds as well as all underground metallic piping systems, including water, gas and sewer. Interconnection to the gas or water line shall be made on the customer’s side of the meter. Grounded metal bodies located within the required bonding distance shall be bonded to the lightning protection system using the required bonding conductors and connections. The bonding distance shall be determined by bonding distance formula shown in the latest edition of NFPA 780. Surge Protection Surge suppression devices shall be provided at all power service entrances. These devices shall be rated for lightning protection and listed by Underwriters Laboratories Inc. in accordance with the latest edition of UL 1449. Surge suppression devices should be installed on entrances of conductive signal, data, and communication service by the service provider. PART 3 – EXECUTION 3.1 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS The installation of the lightning protection system shall be accomplished by an experienced installation company that is UL Listed. A Certified Master Installer shall directly supervise the installation. All equipment shall be installed in a neat, workmanlike manner. The installation shall be completed in accordance with these specifications, the shop drawings provided by the lightning protection component manufacturer and applicable installation standards shown above. Install conductors with direct paths from air terminals to ground connections and, where indicated, run conductors in non-metallic raceway, Schedule 40 minimum. 3.2 CORROSION PROTECTION Use no combination of materials that may form an electrolytic couple of such nature that corrosion is accelerated in the presence of moisture, unless moisture is permanently excluded from the junction of such metals. Where unusual conditions exist that would cause deterioration or corrosion of conductors, use conductors with suitable protective coatings. Where the lightning protection system is bonded to metallic objects such as exhaust stacks, roof drains, and air handling units, use connectors designed to prevent corrosion due to differences in metals. Also, ensure that bonding does not limit access to equipment for service. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com LONG SPECIFICATIONS 3.3 GROUNDING AND BONDING Provide equipment grounding and bonding connections sufficiently tight to assure permanent and effective grounds and bonds. 3.4 FIELD QUALITY CONTROL Provide an inspection by Underwriters Laboratories Inc. and deliver the Master Label Certificate to the Owner or Engineer. If the protected structure is an addition to or is attached to an existing structure that does not have a functioning lightning protection system, the contractor shall certify that the new system complies with the specified standard and shall advise the Owner or Engineer on the lightning protection work required on the existing structure so a Master Label may be obtained. The attached structure(s) not fully compliant because of damaged systems, missing systems, or improperly installed systems shall be fully protected and/or repaired in order to obtain all required inspections and certifications for the Owner. If the protected structure is an addition to or is attached to an existing structure that does have a lightning protection system, the contractor shall bring to the attention of the Engineer and advise the Owner of any additional work that may be required in order to bring the existing lightning protection system into compliance with the specified standards and thus qualify for a Master Label from UL. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com ALUMINUM CONDUCTORS ALUMINUM CONDUCTORS NO. OF STRANDS STRAND DIAMETER STRAND AWG DIAMETER in.(mm) LBS PER 1000 FT CIRCULAR MILLS Part # AWG STRAND CONFIGURATION A50 LP Class I Smooth Weave 24 .065” 14 0.413(10.50) 98 98,640 A51 1/0 Smooth Weave 26 .065” 14 0.432(11.00) 103 109,850 A52 1/0 Smooth Weave 28 .065” 14 0.491(12.50) 109 118,300 A53 2/0 Smooth Weave 32 .065” 14 0.527(13.40) 124 135,200 A54 Class II Rope Lay 31 .081” 12 .629 (16.00) 197 203,391 A55 4/0 or LP Class II Concentric 37 .0757” 12-1/2 0.523(13.30) 204 211,700 ALUMINUM SECONDARY CONDUCTORS NO. OF STRANDS STRAND DIAMETER STRAND AWG DIAMETER in.(mm) LBS PER 1000 FT CIRCULAR MILLS Part # AWG STRAND CONFIGURATION A62 #4 Concentric 10 .065” 14 .228(5.80) 41 42,200 A63 #2 Smooth Weave 16 .065” 14 -- 62 67,600 A64 #4 Solid 1 .2044” 4 0.204(5.18) 40 41,740 A65 #2 Solid 1 .2577” 2 0.257(6.55) 60 66,360 All conductors on this page are UL Listed. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com ALUMINUM CONDUCTORS ALUMINUM STEEL REINFORCED CONDUCTORS STANDARD ALUMINUM CONDUCTOR STEEL REINFORCED Part # AWG STRAND CONFIGURATION ACSR51 1/0 Concentric NO. OF STRANDS STRAND DIAMETER STRAND AWG WT PER 1000 FT CIRCULAR MILLS RATED STRENGTH (LBS) 7 .1327” 8 145 105,656 4380 HIGH STRENGTH ALUMINUM CONDUCTOR STEEL REINFORCED NO. OF STRANDS STRAND DIAMETER STRAND AWG WT PER 1000 FT CIRCULAR MILLS RATED STRENGTH (LBS) Part # AWG STRAND CONFIGURATION ACSR52H 1/0 Concentric 19 .0961” 11 277 110,823 11,300 ACSR55H Class II Concentric 19 .1327” 8 527 211,311 28,400 Other sizes and configurations of Aluminum and Aluminum Steel Reinforced conductors are available. Please contact our sales department for your specific need. ALUMINUM STRIP, BAR, AND FLAT BRAID Part # AWG NOMINAL WIDTH NOMINAL THICKNESS STRIP OR FLEX BRAID LBS PER 1000 FT A66 LP Class I 1-1/4” .08” STRIP 118 A67 LP Class II 2” .1” STRIP 240 A68 4 3/4” .110” FLEX BRAID 56 A69 2 1” .140” FLEX BRAID 80 All conductors on this page are UL Listed. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com COPPER CONDUCTORS COPPER CONDUCTORS AWG STRAND CONFIGURATION NO. OF STRANDS STRAND DIAMETER STRAND AWG DIAMETER in.(mm) TIN PLATED LBS PER 1000F T CIRCULAR MILLS C50 LP Class I Smooth Weave 29 .046” 17 0.338(8.60) NO 189 61,350 C50T LP Class I Smooth Weave 29 .046” 17 0.338(8.60) YES 189 61,350 C51 LP Class I Smooth Weave 30 .046” 17 0.360(9.16) NO 191 63,450 C52 #2 Smooth Weave 32 .046” 17 0.382(9.72) NO 206 67,700 C52T #2 Smooth Weave 32 .046” 17 0.382(9.72) YES 206 67,700 C53 #2 Smooth Weave 36 .046” 17 0.393(10.00) NO 220 76,150 C54 1/0 Smooth Weave 24 .067” 14 0.444(11.30) NO 340 105,600 C54T 1/0 Smooth Weave 24 .067” 14 0.444(11.30) YES 340 105,600 C54-19 1/0 Concentric 19 .075” 14 0.347(8.82) NO 325 106,850 C55 LP Class II Rope Lay 28 .067” 14 0.472(12.00) NO 380 125,600 C55T LP Class II Rope Lay 28 .067” 14 0.472(12.00) YES 380 125,600 C56 2/0 Rope Lay 30 .067” 14 0.495(12.60) NO 420 134,600 C56T 2/0 Rope Lay 30 .067” 14 0.495(12.60) YES 420 134,600 C56-19 2/0 Concentric 19 .0837” 12 0.403(10.25) NO 410 133,100 C56-19T 2/0 Concentric 19 .0837” 12 0.403(10.25) YES 410 133,100 C58-19 3/0 Concentric 19 .094” 11 0.450(11.45) NO 518 167,800 C58-19T 3/0 Concentric 19 .094” 11 0.450(11.45) YES 518 167,800 C59-19 4/0 Concentric 19 .1057” 10 0.527(13.40) NO 653 211,600 C59-19T 4/0 Concentric 19 .1057” 10 0.527(13.40) YES 653 211,600 C59-37 4/0 Concentric 37 .0757” 13 0.527(13.40) NO 653 211,600 C59-37T 4/0 Concentric 37 .0757” 13 0.527(13.40) YES 653 211,600 Part # All conductors on this page are UL Listed. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com COPPER CONDUCTORS COPPER SECONDARY CONDUCTORS Part # AWG STRAND CONFIGURATION NO. OF STRANDS STRAND DIAMETER STRAND AWG DIAMETER in.(mm) TIN PLATED LBS PER 1000FT CIRCULAR MILLS C61 #6 Smooth Weave 14 .046” 92 29,600 #6 Smooth Weave 14 .046” YES 92 29,600 C62 #4 Smooth Weave 10 .067” 0.236(6.00) 0.236(6.00) 0.228(5.80) NO C61T 17 17 14 NO 130 44,800 C62T #4 Smooth Weave 10 .067” 14 0.228(5.80) YES 130 44,800 C63 #6 Solid 1 .162” 6 0.162(4.11) NO 80 26,240 C63T #6 Solid 1 .162” 6 0.162(4.11) YES 80 26,240 C64 #4 Solid 1 .2044” 4 0.204(5.18) NO 127 41,740 C64T #4 Solid 1 .2044” 4 0.204(5.18) YES 127 41,740 C65 #2 Solid 1 .2577” 2 0.257(6.55) NO 204 66,360 C65T #2 Solid 1 .2577” 2 0.257(6.55) YES 204 66,360 COPPER/COPPERCLAD STEEL COMPOSITE CONDUCTORS Part # AWG STRAND CONFIGURATION NO. OF 30% COPPERCLAD STRANDS NO. OF COPPER STRANDS STRAND DIAMETER STRAND AWG WT PER 1000 FT CCSR54 1/0 Concentric 2 5 .1373” 8 394 CIRCULAR MILLS BREAKING LOAD LBS 115,600 8,563 Other sizes and configurations of Copper and Copperclad conductors are available. Please contact our sales department for your specific need. All Conductors on this page are UL Listed. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com COPPER CONDUCTORS COPPER WELD CONDUCTORS 30% CONDUCTIVITY HIGH STRENGH CONCENTRIC CABLE Part # AWG NO. OF STRANDS STRAND DIAMETER STRAND AWG WT. PER 1000FT BREAKING LOAD CIRCULAR MILLS CW7X83H 1/0 7 .1285 8 324 11,101 115,586 CW7X53H 4/0 7 .1819 5 649 19,858 231,613 30% CONDUCTIVITY DEAD SOFT ANNEALED CONCENTRIC CABLE Part # AWG NO. OF STRANDS STRAND DIAMETER STRAND AWG WT. PER 1000FT BREAKING LOAD CIRCULAR MILLS CW7X3D 4/0 7 .1819 5 649 7148 231,613 Other sizes and configurations of Copperweld Conductors are available. Please contact our sales department for your specific need. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THREADED ROD AND BUS BAR COPPER STRIP, BAR, AND FLAT BRAID CONDUCTOR Part # AWG NOMINAL WIDTH NOMINAL THICKNESS TIN PLATED STRIP OR FLEX BRAID LBS PER 1000 FT C66 LP Class I 1-1/4” .051” NO STRIP 197 C66T LP Class I 1-1/4” .051” YES STRIP 197 CS.125X1 LP Class I 1” .125” NO STRIP 485 C67 LP Class II 2” .064” NO STRIP 503 C68 #4 3/4" .125” NO FLEX BRAID 128 C68T #4 3/4" .125” YES FLEX BRAID 128 C69 #1 1” .125” NO FLEX BRAID 260 C69T #1 1” .125” YES FLEX BRAID 260 All Conductors listed above are UL Listed STAINLESS STEEL CONDUCTOR PART # AWG NOMINAL WIDTH NOMINAL THICKNESS TIN PLATED STRIP OR FLEX BRAID LBS PER 1000 FT S66 LP Class I 1 .06 NO STRIP 210 S69 #1 1 .125 NO FLEX BRAID 240 Other sizes and configurations of Flat Braid conductors are available. Please contact our sales department for your specific need. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THREADED ROD AND BUS BAR ALL-THREADED ROD Available in Aluminum, Copper or Stainless Steel. All threaded solid rod. Threads are N.C. Standard and are available in any length up to 12’. C74 A75 C75 S75 A76 C76 3/8” Copper all threaded rod 1/2" Aluminum all threaded rod 1/2” Copper all threaded rod 1/2” Stainless Steel all threaded rod 5/8” Aluminum all threaded rod 5/8” Copper threaded rod S75X4 S75X6 S75X12 S75X18 S75X24 1/2” Stainless Steel 4” long 1/2” Stainless Steel 6” long 1/2” Stainless Steel 12” long 1/2” Stainless Steel 18” long 1/2” Stainless Steel 24” long Please indicate length in inches, after the part number, separated by an “x”. Example: S75X36= 1/2” Stainless Steel-36” long Threaded rod can be cut to any length up to 12’. COPPER BUS BAR Solid Copper or tinned solid Copper bus bar. 100% conductivity. Can be cut to any length up to 12’. C85X58 C85 C86 C87 C87T C88 C88T C89 C89T 1/4” X 5/8” Solid Copper Bar 1/4” X 3/4” Solid Copper Bar 1/4” X 1” Solid Copper Bar 1/4" X 2” Solid Copper Bar 1/4” X 2” Solid Copper Bar Tinned 1/4" X 4” Solid Copper Bar 1/4” X 4” Solid Copper Bar Tinned 1/4” X 6” Solid Copper Bar 1/4” X 6” Solid Copper Bar Tinned Please indicate length in inches, after the part number, separated by an “x”. Example: C88X48= 1/4”x4” Copper Bar-48” long Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com OTHER SOLID BARS A87 S81 S83 S84 SSFB3/16X2” 1/4” X 2” Solid Aluminum Bar-UL Listed 1/8” X 1” Solid Stainless Steel Bar 1/8” X 3” Solid Stainless Steel Bar 1/8” X 4” Solid Stainless Steel Bar 3/16” X 2” Solid Stainless Steel Bar-UL Listed Solid bars can be cut to any length up to 12’. Please indicate length in inches, after part number, separated by an “X”. Example: S81X15=1/8” X 1” Stainless Steel bar 15” long. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com AIR TERMINALS All air terminals are made of solid Aluminum, Copper or Stainless Steel rod. Air terminals can be ordered with a standard 2” taper or safety tipped. All air terminals are numbered for easy ordering. UL Listed DESCRIPTION FOR ORDERING First two numbers–Designates air terminal diameter. Second two numbers–Designates air terminal length. Prefix A-Designates Aluminum. Prefix C– Designates Copper. Prefix S– Designates Stainless. Suffix L– Designates Lead Dipped. Suffix N– Designates Nickel Plated. Suffix ST– Designates Safety Tipped. Examples: A1212 C3824ST C1236LST Aluminum 1/2" X 12” Air Terminal Copper 3/8” X 24” Safety Tipped Air Terminal Copper 1/2" X 36” Leaded Safety Tipped Air Terminal Field bends are permissible but must not exceed 90 degrees or have a radius of bend less than 8 inches. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 2 0 Suffix LC– Designates 1/16” Lead Coated. All air terminals over 24” in length – Refer to catalog numbers G150 thru G166 for proper bracing. 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINALS Spring Loaded Air Terminals are available up to 24” in length. DESCRIPTION FOR ORDERING First two numbers–Designates air terminal diameter. Second two numbers–Designates air terminal length. Prefix A– Designates Aluminum. Prefix C–Designates Copper. Prefix S– Designates Stainless. Suffix SPL– Designates Spring Loaded. Suffix L–Designates Lead Dipped. Suffix N– Designates Nickel Plated. Suffix ST–Designates Safety Tipped. Each Spring Loaded Air Terminal is supplied with a safety wire. Examples: A1212SPL A5824STSPL C1218NSPL Aluminum 1/2" X 12” Spring Loaded Air Terminal Aluminum 5/8” X 24” Safety Tipped Spring Loaded Air Terminal Nickel Plated Copper 1/2” X 18” Spring Loaded Air Terminal Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 2 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINALS TUBE AIR TERMINAL DESCRIPTION FOR ORDERING First two numbers–Designates air terminal diameter. Second two numbers –Designates air terminal length. Prefix A– Designates Aluminum. Prefix C– Designates Copper. Suffix TH – Designates Threaded. Suffix TF– Designates Tubular Flat. Examples: A5812TH C5818TF Aluminum 5/8” X 12” tube air terminal with threads Copper 5/8” X 18” tube air terminal with 3” flat surface Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 2 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com AIR TERMINALS DESCRIPTION FOR ORDERING Concealed Air Terminals First Two Numbers-Designates air terminal diameter. Second Two Numbers-Designates air terminal length. Prefix A-Designates Aluminum. Prefix C-Designates Copper. Suffix ST-Designates Safety Tipped. Suffix X_ _TH-Designates Thread Length. Field bends are permissible but must not exceed 90 degrees or have a radius of bend less than 8 inches. Example: A1224X12TH C1232STX14TH Aluminum 1/2” X 24 Air Terminal with 12” of thread Copper 1/2” X 32 Air Terminal with 14” of thread Air terminals are made of solid Aluminum or Copper in one length furnished with compatible nuts and washers. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 2 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINALS Off Set Air Terminal DESCRIPTION FOR ORDERING First Two Numbers-Designates air terminal diameter. Second Two Numbers-Designates air terminal length. Prefix A- Designates Aluminum. Prefix C- Designates Copper. Suffix ST- Designates Safety Tipped. Suffix X_ _OS- Designates offset in point. Field bends are permissible but must not exceed 90 degrees or have a radius of bend less than 8 inches. Example: A1224X4OS Aluminum 1/2” X 24” with 4” offset Air Terminals are made of solid Aluminum or Copper in one solid length, off set to your specifications. Please provide your exact requirements. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 2 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com AIR TERMINAL ACCESSORIES SAFETY BALLS Safety tipped balls with internal threads for use on extension rods in place of standard air terminals. Available in cast Aluminum or Brass, 1-1/2” diameter. Specify diameter of internal threads: 3/8”, 1/2", or 5/8”. UL Listed. A10012 Aluminum Safety Tip Ball 1/2” threads C10038 Brass Safety Ball 3/8” threads A10058 Aluminum Safety Tip Ball 5/8” threads C10012 Brass Safety Ball 1/2” threads C10058 Brass Safety Ball 5/8” threads SAFETY CAP Machined Aluminum or Brass air terminal cap with internal threads–use where safety to people is desired. Specify diameter of internal threads: 3/8”, 1/2” or 5/8”. UL Listed. A10112 Aluminum Safety Cap 1/2” threads A10158 Aluminum Safety Cap 5/8” threads C10138 Brass Safety Cap 3/8” threads C10112 Brass Safety Cap 1/2” threads C10158 Brass Safety Cap 5/8” threads Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 2 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com AIR TERMINAL ACCESSORIES SPRING ADAPTOR Stainless Steel Spring Adaptor for use with all sizes of air terminals. For use where fixed air terminals obstruct window washing or moving equipment. Supplied with a safety wire and hardware. UL Listed. C102 A103 C103 A104 C104 Stainless Steel Spring for 3/8” A.T. with Brass Adapters Stainless Steel Spring for 1/2” A.T. with Aluminum Adapters Stainless Steel Spring for 1/2” A.T. with Brass Adapters Stainless Steel Spring for 5/8” A.T. with Aluminum Adapters Stainless Steel Spring for 5/8” A.T. with Brass Adapters SAFETY WIRE Stainless Steel wire attaches around air terminal and to base support to keep air terminal from falling due to breakage. Comes with either A702 or C702 loop and hardware to attach to air terminal. A105 C105 Stainless Steel Safety Wire with A702 loop and hardware Stainless Steel Safety Wire with C702 loop and hardware Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 2 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINAL ACCESSORIES EXTENSION RODS Solid Aluminum, Copper or Stainless Steel rod threaded at each end for use as a main conductor or air terminal extension. Available in lengths up to 144”. Specify length in inches, after the part number, separated by “x” when ordering. UL Listed Example: C111X42=1/2” Copper-42” long A111 A112 A115 A117 1/2” Diameter Aluminum rod 5/8” Diameter Aluminum rod 1” Diameter Aluminum rod 1-1/2” Diameter Aluminum rod C110 C111 C112 C113 3/8” Diameter Copper rod 1/2” Diameter Copper rod 5/8” Diameter Copper rod 3/4” Diameter Copper rod S111 1/2” Diameter Stainless Steel rod S112 5/8” Diameter Stainless Steel rod S113 3/4” Diameter Stainless Steel rod STAND-OFF AIR TERIMAL HOLDER Machined Brass or Aluminum air terminal holder with adjustable threaded rod for irregular surface mounting – 5/16” stainless steel all thread rod for support with two nuts and washers for locking on mounting surface–1/4” set screw on point-standard rod length 6”. Longer or shorter rod available. Fits all air terminals: 3/8”, 1/2” or 5/8”. UL Listed. A140 Aluminum Air Terminal Holder C140 Brass Air Terminal Holder A141 Aluminum Air Terminal Holder with 2-Bolt Cap-fits 1/2” or 5/8” C141 Brass Air Terminal Holder with 2-Bolt Cap-fits 1/2” or 5/8” If longer support rod is needed, please add “x” and length. Example: A140X12 – air terminal holder with 12” extension rod. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 2 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINAL ACCESSORIES 143 RIGHT ANGLE AIR TERMINAL EXTENSION Provides 2” of extension to a vertical mount base. A14312 A14358 1/2” Aluminum Air Terminal Extension 5/8” Aluminum Air Terminal Extension C14338 C14312 C14358 3/8” Brass Air Terminal Extension 1/2” Brass Air Terminal Extension 5/8” Brass Air Terminal Extension 147 OFF SET AIR TERMINAL OR CABLE HOLDER Aluminum or tinned copper strip used to offset air terminal or cable off a curved or flat surface. Offset distance is 1” and ears are 6” long. Uses bolt tension to secure air terminal or cable tightly. Will support solid rods or cable. Other lengths and sizes can be fabricated. A14712 A14758 Aluminum for 1/2" diameter Aluminum for 5/8” diameter Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 C14738 C14712 C14758 Pa ge 2 8 Tinned copper support for 3/8” Tinned copper support for 1/2" Tinned copper support for 5/8” 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINAL ACCESSORIES 148 STRAP TYPE AIR TERMINAL OR CABLE TO PIPE HOLDER Aluminum or tinned copper strip used to hold an air terminal or cable to a pipe. Use bolt tension to secure air terminal or cable to pipe. Can be fabricated to accommodate any combination with any offset length. Follow the example below to order any size configuration. Standard sizes are listed below. A Material Code A TC 148 Standard Style Constant Example: A1481244 12 4 4 Air Terminal Offset O.D. or (Inches) of Cable Size Pipe 12=1/2” (Inches) 38=3/8” 58=5/8” Aluminum 1/2” diameter 4” offset 4” O.D. Pipe 149 OFF SET AIR TERMINAL OR CABLE HOLDER Aluminum or tinned copper strip used to offset air terminal or cable off a curved or flat surface. Offset distance is 4” and ears are 2” long. Uses bolt tension to secure air terminal or cable tightly. Will support solid rods or cable. Other lengths and sizes can be fabricated. A14912 A14958 Aluminum for 1/2" diameter Aluminum for 5/8” diameter Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 C14938 C14912 C14958 Pa ge 2 9 Tinned copper support for 3/8” Tinned copper support for 1/2" Tinned copper support for 5/8” 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com AIR TERMINAL ACCESSORIES BRACING Galvanized tripod braces made of mild steel. Available with two mounting holes or adhesive feet. For all air terminals over 24” in length. Specify brace size 1/2" or 5/8” when ordering. Use 1/2” brace for 3/8” air terminal. UL Listed Other sizes available upon request. Mounting Holes G150 G151 G152 G153 G154 G155 G156 - 18” Tripod brace 24” Tripod brace 36” Tripod brace 48” Tripod brace 60” Tripod brace 72” Tripod brace 84” Tripod brace Adhesive Tripods G160 G161 G162 G163 G164 G165 G166 - 18” Tripod brace 24” Tripod brace 36” Tripod brace 48” Tripod brace 60” Tripod brace 72” Tripod brace 84” Tripod brace Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COUPLINGS ALUMINUM 1/2” female to 1/2” female A1252F2F A1252F2M 1/2” female to 1/2” male A1262F5F A1262F5M A1262M5F 1/2” female to 5/8” female 1/2” female to 5/8” male 1/2” male to 5/8” female A1275F5F A1275F5M 5/8” female to 5/8” female 5/8” female to 5/8” male BRASS All Couplings on this page are UL Listed. C1233F3F C1233F3M 3/8” female to 3/8” female 3/8” female to 3/8” male C1243F2F C1243F2M C1243M2F 3/8” female to 1/2” female 3/8” female to 1/2” male 3/8” male to 1/2” female C1252F2F C1252F2M 1/2” female to 1/2” female 1/2” female to 1/2” male C1262F5F C1262F5M C1262M5F 1/2” female to 5/8” female 1/2” female to 5/8” male 1/2” male to 5/8” female C1275F5F C1275F5M 5/8” female to 5/8” female 5/8” female to 5/8” male Standard coupling length is 1-1/4” long; other lengths are available upon request. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SWIVELS Swivel action allows air terminal to level on most surfaces. Several combinations available. 130 SERIES ALUMINUM A1332F2F A1332F2M 1/2” female to 1/2” female 1/2” female to 1/2” male A1342F5F A1342F5M A1342M5F 1/2” female to 5/8” female 1/2” female to 5/8” male 1/2” male to 5/8” female A1355F5F A1355F5M 5/8” female to 5/8” female 5/8” female to 5/8” male 130 SERIES BRASS All swivels on this page are UL Listed. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 C1313F3F C1313F3M 3/8” female to 3/8” female 3/8” female to 3/8” male C1323F2F C1323F2M C1323M2F 3/8” female to 1/2” female 3/8” female to 1/2” male 3/8” male to 1/2” female C1332F2F C1332F2M 1/2” female to 1/2” female 1/2” female to 1/2” male C1342F5F C1342F5M C1342M5F 1/2” female to 5/8” female 1/2” female to 5/8” male 1/2” male to 5/8” female C1355F5F C1355F5M 5/8” female to 5/8” female 5/8” female to 5/8” male Pa ge 3 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SWIVELS/ACCESSORIES 170 Series Swivel Swivel action allows air terminals to level on most surfaces. Added jam nut allows swivel to be locked in place. UL Listed Aluminum A1732F2M A1742F5M A1755F5M 1/2” female to 1/2” male 1/2” female to 5/8” male 5/8” female to 5/8” male Brass C1713F3M C1723F2M C1732F2M C1742F5M C1755F5M 3/8” female to 3/8” male 3/8” female to 1/2” male 1/2” female to 1/2” male 1/2” female to 5/8” male 5/8” female to 5/8” male LC 180-1/16” Lead Tube 1/16” thick lead tube to protect air terminals or cable on heavy duty stacks. Also provides a barrier between dissimilar metals. Example: Copper conductor crossing over Aluminum or Steel parapet cap. Specify length in inches, after the part number, separated by an “X” when ordering. Example: LC180X34X24=3/4” Lead tube-24”long LC180X916 LC180X58 LC180X34 9/16” I.D. X 1/16” wall lead tube 5/8” I.D. X 1/16” wall lead tube 3/4” I.D. X 1/16” wall lead tube Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com ACCESSORIES S182 MOUNTING BRACKET Stainless Steel mounting bracket used to mount air terminal and base to cooling tower fan stack. S182 1/8”X3”X2-1/2” Stainless Steel mounting bracket S183 SUPPORT BRACKET Stainless Steel support bracket used to support air terminal at top of cooling tower fan stack. S183 1/8”X9” Stainless Steel support bracket Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 3 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 209 DUAL MOUNT BASE A cast base threaded for mounting on horizontal or vertical surfaces using screws, 1/4” bolts, 1/4” drive-in anchors, or an adhesive. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for air terminal sizes 3/8” and 1/2”. Specify when ordering. UL Listed A209 C209 C209L Aluminum Bronze Lead Coated Bronze 210 TOP MOUNT BASE A cast base threaded for mounting on horizontal surfaces using screws, 1/4” bolts, 1/4” drive-in anchors, or an adhesive. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A210 C210 C210L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 3 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 211 SIDE MOUNT BASE A cast base threaded for mounting on vertical surfaces using screws, 1/4” bolts, or 1/4” drive-in anchors. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A211 C211 C211L Aluminum Bronze Lead Coated Bronze 216 UNIVERSAL SWIVEL BASE This is the most universal base in the industry. The swivel adaptor allows the air terminal to level under most conditions. It can be secured with screws, nails, 1/4” bolts, 1/4” drive-in anchors, or an adhesive. Bolt tension cap can be turned so the cable can run horizontal or vertical. Perfect for skylights, domed or gently sloping roofs, or any uneven surface. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A216 C216 C216L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com BASES 218 OFFSET BASE A cast base with a 2” offset to clear an overhang when mounted on a vertical surface using screws, 1/4” bolts, or 1/4” drive-in anchors. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A218 C218 C218L Aluminum Bronze Lead Coated Bronze 220 ADHESIVE BASE This base has bolt tension cable clamping and can be used on any surface with an adhesive. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed. A220 C220 C220L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 3 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 222 SIDE MOUNT BASE This cast base has bolt tension cable clamping and can be mounted vertically with screws, 1/4” bolts, or 1/4” drive-in anchors. Furnished for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A222 C222 C222L Aluminum Bronze Lead Coated Bronze 223 DUAL MOUNT BASE This cast base can be mounted either horizontally or vertically with screws, 1/4” bolt, or 1/4” drive-in-anchor. Bolt tension cap can be turned so cables run horizontal or vertical. Furnished for air terminal size 3/8” or 1/2”. Specify when ordering. UL Listed. A223 C223 C223L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 3 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 224 TOP MOUNT BASE This cast base can be mounted horizontally with screws, 1/4” bolts, or 1/4” drive-in anchors. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A224 C224 C224L Aluminum Bronze Lead Coated Bronze 225 SIDE MOUNT BASE This cast base can be mounted vertically with screws, 1/4” bolts, or 1/4” drive-in anchors. Bolt tension cap can be turned so cables can run horizontal or vertical. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A225 C225 C225L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 3 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com BASES 227 TOP MOUNT BASE This cast base has bolt tension cable clamping and can be mounted horizontally with screws, 1/4” bolts, or 1/4” drive-in anchors. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A227 C227 C227L Aluminum Bronze Lead Coated Bronze C228 COPPER NARROW SURFACE BASE This strap base can be mounted on a narrow surface or ridge roof with screws, nails or adhesive. Base can be modified to accept other anchors. Compression type fingers crimp over cable for easy installation. Available in copper and for Class I structures only. Furnished for air terminal sizes 3/8” and 1/2”. Specify when ordering. UL Listed C228 C228L Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 229 NARROW SURFACE BASE This strap base can be mounted on a narrow surface or ridge roof with screws, nails or adhesive. Base can be modified to accept other anchors. Bolt tension cap provides maximum cable support. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A229 C229 C229L Aluminum Copper Lead Coated Copper C230 COPPER RIDGE MOUNT BASE This strap base can be mounted on a ridge roof with screws, nails or adhesive. Base can be modified to accept other anchors. Compression type fingers crimp over cable for easy installation. Available in copper and for Class I structures only. Furnished for air terminal sizes 3/8” and 1/2”. Specify when ordering. UL Listed C230 C230L Copper Lead Coated Copper 231 RIDGE MOUNT BASE This strap base can be mounted on ridge roof with screws, nails or adhesive. Base can be modified to accept other anchors. Bolt tension cap provides maximum cable support. Furnished for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A231 C231 C231L Aluminum Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 231TR TILE ROOF RIDGE BASE This strap base is designed to mount over clay tiles without screws or nails. Bolt tension cap provides maximum cable support. Furnished for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A231TR C231TR C231LTR Aluminum Copper Lead Coated Copper 232 CAST RIDGE BASE This cast base can be mounted on a ridge roof with screws or nails. Cast with a soft alloy so it can easily form to the ridge. The base can be modified to accept other anchors. Compression type fingers crimp over cable for easy installation. Available in copper for Class I structures only. Furnished for air terminal sizes 3/8” and 1/2”. Specify when ordering. UL Listed C232 C232L Brass Lead Coated Brass 233 CAST RIDGE BASE This cast base can be mounted on ridge roof with screws or nails. Cast with a soft alloy so it can easily form to the ridge. This base can be modified to accept other anchors. Bolt tension cap provides maximum cable support. Furnished for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A233 C233 C233L Aluminum Brass Lead Coated Brass Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 235 CAST STRAIGHT BASE Cast straight base. Two bolts hold cable firmly and air terminal screws into top to keep cable and air terminal in straight line. Available for air terminal sizes 3/8” and 1/2”. Specify when ordering. Also available in Hex Rod for all air terminal sizes and with set screws in lieu of bolts. UL Listed A235 C235 C235L CAST Aluminum Bronze Lead Coated Bronze A235H C235H C235HL HEX ROD Aluminum Hex Brass Hex Lead Coated Brass Hex Note: Please add suffix “SS” to part number for set screw. 236 ROUND ROD BASE Aluminum or brass machined straight base. Machined from 1” round or 1” Hex rod stock material and available for all air terminal sizes. Specify when ordering. Also available with set screws. UL Listed A236 C236 C236L Aluminum Brass Lead coated brass A236SS C236SS C236LSS Aluminum with set screws Brass with set screws Lead coated brass with set screws Note: Add suffix “H” to end of part number to reference Hex rod material. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 237 STANDING SEAM BASE This cast base for standing seam roof has 3/4" groove to fit over most seams. Provided with a swivel adapter for leveling air terminals. Cable holder is adjustable so cables can run parallel or perpendicular. Two set screws secure base to seam. Available for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A237 C237 C237L Aluminum Bronze Lead Coated Bronze 239 TOP MOUNT PIPE BASE This cast pipe base is for use with 0.750” to 1.315” O.D. pipe. This base is drilled for Top Mount use only. Available for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A239 C239 C239L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 240 & 242 TOP MOUNT PIPE BASE 241 & 243 SIDE MOUNT PIPE BASE Cast pipe bases. Base can be drilled for top mounting or side mounting on most pipes. Base sizes range from 1.314” to 1.900” and 1.750” to 2.500”. Each base is numbered for easy ordering. Available for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed Top Mount Base with 1.314” to 1.900” Range A240 C240 C240L Aluminum Bronze Lead Coated Bronze Side Mount Base with 1.314” to 1.900” Range A241 C241 C241L Aluminum Bronze Lead Coated Bronze Top Mount Base with 1.750” to 2.500” Range A242 C242 C242L Aluminum Bronze Lead Coated Bronze Side Mount Base with 1.750” to 2.500” Range A243 C243 C243L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 4 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com BASES STRAP BASES Formed Aluminum or Copper top mount pipe bases. Any size can be fabricated to order. Please use 247X and O.D. size of pipe. Examples of 11”, 42”, and 48” O.D. pipes are given. Available for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. Also available with bolt tension cap. Add suffix “CH” for cable holder. UL Listed. Top mount base for pipe size 11” A247x11 Aluminum top mount base A247x11CH Aluminum base with cable connector C247x11 Copper top mount base C247x11CH Copper base with cable connector Top mount base for pipe size 42” A247x42 Aluminum top mount base C247x42 Copper top mount base Top mount base for pipe size 48” A247x48 Aluminum top mount base C247x48 Copper top mount base Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 4 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com BASES 248 & 249 DUAL MOUNT BASE Cast pipe base is machined for either top mounting or side mounting on pipes. Base sizes range from 1.314” to 1.900” and 1.750” to 2.500”. Available for air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed Dual Mount Base with 1.314” to 1.900” Range A248 Aluminum C248 Bronze C248L Lead Coated Bronze Dual Mount Base with 1.750” to 2.500” Range A249 Aluminum C249 Bronze C249L Lead Coated Bronze 250 STAMPED VENT BASE Stamped vent base with no cable holder. Over 8 square inches of contact to direct mount air terminal on continuous metal surface. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A250 C250 C250L Aluminum Copper Tin Plated Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 4 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com BASES 252 CAST VENT BASE Cast vent base with no cable holder. Over 8 square inches of contact to direct mount air terminal on continuous metal surface. Furnished for all air terminal sizes 3/8”, 1/2”, and 5/8”. Specify when ordering. UL Listed A252 C252 C252L Aluminum Bronze Lead Coated Bronze 262 CONCEALED RIDGE BASE Stamped Ridge Base with finger cable connector on bottom to conceal cable along ridge. Installed under roofing materials to provide concealment of base and cables. UL Listed. A262 Aluminum C262 Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BASES 290 SERIES U-BOLT SWIVEL BASES WITH 3 SQ IN. Cast aluminum or brass u-bolt pipe base with swivel point adapter. Available for O.D. pipe ranges from .400” to 8.625” and air terminal sizes 3/8”, 1/2" and 5/8”. Specify when ordering. Provides 3 square inches of contact to pipe. UL Listed. 1” U-Bolt fits .400” to 1.315” O.D. pipes A291 Aluminum C291 Bronze C291L Lead Coated Bronze 2” U-Bolt fits 1.315” to 2.000” O.D. pipes A292 Aluminum C292 Bronze C292L Lead Coated Bronze 3” U-Bolt fits 1.900” to 3.000” O.D. pipes A293 Aluminum C293 Bronze C293L Lead Coated Bronze 4” U-Bolt fits 2.750 to 4.500” O.D. pipes A296 Aluminum C294 Bronze C294L Lead Coated Bronze 6” U-Bolt fits 4.500” to 6.750” O.D. pipes A294 Aluminum C296 Bronze C296L Lead Coated Bronze 8” U-Bolt fits 6.000” to 8.625” O.D. pipes A298 Aluminum C298 Copper C298L Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 4 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SPLICERS 301 TEE SPLICER Stamped tee splicer with compression type fingers to crimp around cable. Made from 14 gauge Copper or 10 gauge Aluminum stock. For use with all main size conductors on Class I structures only. UL Listed A301 C301 C301L Aluminum Copper Lead Coated Copper 303 STRAIGHT SPLICER Stamped straight splicer with compression type fingers to crimp around ends of cable for a straight connection. Made from 14 gauge Copper or 10 gauge Aluminum stock. For use with all main size conductors on Class I structures only. UL Listed A303 C303 C303L Aluminum Copper Lead Coated Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 5 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SPLICERS 305 PARALLEL SPLICER Stamped parallel splicer with compression type fingers to crimp around cable. Made from 14 gauge Copper or 10 gauge Aluminum stock. For use with all main size conductors on Class I structures only. UL Listed A305 C305 C305L Aluminum Copper Lead Coated Copper 309 PARALLEL SPLICER Cast parallel cable splicer with one carriage bolt and 1-1/2” of contact on cables or wires. Designed so bolt does not come through bottom of splicer and penetrate roof membrane. May be used with full size cables and secondary bonding wire. UL Listed A309 C309 C309L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SPLICERS 310 CAST PARALLEL SPLICER Cast parallel cable splicer with single bolt tension and 1-1/2” of contact on cables and wires. Splicer may be used with full size cables or secondary bonding wire. UL Listed A310 C310 C310L Aluminum Bronze Lead Coated Bronze C311 PARALLEL SPLICER Cast parallel cable splicer with double carriage bolt tension and 2” of contact on cable and wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed A311 C311 C311L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 5 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SPLICERS 312 PARALLEL SPLICER Cast parallel cable splicer with one carriage bolt and 1” of contact. Splicer may be used with rod, cable, or bonding wire where less contact is acceptable. UL Listed A312 C312 C312L Aluminum Bronze Lead Coated Bronze 313 CAST STRAIGHT SPLICER Cast straight splicer has four bolt cable tension–two per cable. Splicer used to butt ends of cable in straight line. Also available in Hex Rod and with set screws in lieu of bolts. UL Listed CAST HEX ROD A313 Aluminum A313H Aluminum Hex C313 Bronze C313H Brass Hex C313L Lead Coated Bronze C313HL Lead Coated Brass Hex Note: Please add suffix “SS” to part number for set screws Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SPLICERS 314 CAST PARALLEL SPLICER Cast parallel cable splicer with double bolt tension and 4” of contact on cable or wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed A314 C314 C314L Aluminum Bronze Lead Coated Bronze 315 CAST PARALLEL SPLICER Cast parallel cable splicer with single bolt tension and 2” of contact on cable or wires. Splicer may be used with full size cables or secondary bonding wires. UL Listed A315 C315 C315L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SPLICERS A320 BIMETALLIC SPLICER Cast bimetallic cable splicer for making connections between aluminum and copper cables in a straight line. Two-bolt tension on each cable for making a strong connection. Use with all main size conductors. UL Listed A320 Aluminum to Copper Bimetallic A320HSS BIMETALLIC SPLICER Machined bimetallic straight splicer for making connections between aluminum and copper cables. Used to make connection inside 1” PVC Conduit. Use with all main size conductors. UL Listed. A320HSS Aluminum to Copper Bimetallic Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SPLICERS A322 BIMETALLIC SPLICER 323 DISCONNECTS Cast bimetallic cable splicer for making connections between Aluminum and Copper cables. Single bolt tension caps allow the cables to come from a variety of directions. Use with all main size conductors. Eliminates the use of an additional splicer. UL Listed A322 Aluminum to Copper Bimetallic Cast cable disconnects used for testing system continuity or ground resistance. Single bolt tension caps allow for easy disconnection. UL Listed A323 C323 Aluminum to Aluminum Disconnect Copper to Copper Disconnect 325 CAST TEE SPLICER Cast tee cable splicer has bolt tension for connections with all main size conductors. UL Listed A325 C325 C325L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 5 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com SPLICERS 327 CROSS RUN SPLICER Cast cross run cable splicer has 1-1/2” of contact with four bolt tension. For use with all full size cables. UL Listed A327 C327 C327L Aluminum Bronze Lead Coated Bronze 330 SECONDARY STRAIGHT SPLICER Cast straight splicer used with secondary cables and wires. May be used where less contact is acceptable. UL Listed. A330 C330 C330L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 404 CAST BONDING PLATE Cast bonding plate with 3 square inches of contact. Bolt tension cap can be turned so cables can run horizontal or vertical. For use with all full size cables. UL Listed A404 C404 C404L Aluminum Bronze Lead Coated Bronze 406 STAMPED BONDING PLATE Stamped bonding plate with 8 square inches of contact. Bolt tension cap provides maximum cable support. For use with all full size cables. UL Listed A406 C406 C406L Aluminum Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS C407 COPPER STAMPED FINGER BONDING PLATE Stamped bonding plate with 8 square inches of contact. Compression type fingers crimp over cable for easy installation. Available in copper and for Class I structures only. For use with all full size cables. UL Listed C407 C407L Copper Lead Coated Copper 410 CAST BONDING PLATE Cast bonding plate with 8 square inches of contact surface. Holes provided for 1/4” bolts or smaller screws. Bolt tension cap can be turned so cables can run any direction. For use with all full size cables. UL Listed A410 C410 C410L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 5 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 411 CAST BONDING PLATE Cast bonding plate with 8 square inches of contact. Bolt tension cap has 1-1/2” of contact. For use with all full size cables. UL Listed A411 C411 C411L Aluminum Bronze Lead Coated Bronze 412 BONDING LUG Cast bonding lug with 3 square inches of contact surface. Available for bolt sizes 1/4”, 3/8”, 1/2”, and 5/8” diameter. Anchor holed drilled in center. Bolt tension cap can turn so cable can be connected from any direction. For use with all full size cables. Specify bolt size when ordering. UL Listed A412 C412 C412L Aluminum Bronze Lead Coated Bronze Example of bolt size: A41212-Aluminum Bonding lug with 1/2” bolt hole Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 413 BONDING LUG Cast bonding lug with 3 square inches of contact surface. Available for bolt sizes 1/4”, 3/8” and 1/2”diameter. Anchor holed drilled at top. Bolt tension cap can turn so cable can be connected from any direction. For use with all full size cables. Specify bolt size when ordering. UL Listed A413 C413 C413L Aluminum Bronze Lead Coated Bronze 414 C-CLAMP BONDING CLAMP Cast bonding clamp has 8 square inches of surface contact. C-type clamp allows easy installation on I-beams or other flat areas up to 1” thickness. Bolt tension cap has 1-1/2” of cable contact. For use with all full size cables. UL Listed A414 C414 C414L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 415 C-CLAMP BONDING CLAMP Cast bonding clamp has 8 square inches of surface contact. C-type clamp allows easy installation on I-beams or other flat areas up to 3” thickness. Bolt tension cap has 1-1/2” of cable contact. For use with all full size cables. UL Listed A415 Aluminum C415 Bronze C415L Lead Coated Bronze 416-418 PIPE CLAMP Cast pipe grounding clamp with 1-1/2” of contact. Available in three pipe sizes. For use with full size cables. UL Listed Pipe Range .750” to 1.315” O.D. Pipe Range 1.750” to 2.500” O.D. A416 Aluminum A418 Aluminum C416 Bronze C418 Bronze C416L Lead Coated Bronze C418L Lead Coated Bronze Pipe Range 1.315” to 1.900” O.D. A417 Aluminum C417 Bronze C417L Lead Coated Bronze 420 GUTTER CLAMP Stamped gutter clamp with compression fingers to crimp over gutter edge and cable. Use with all full size cables. Available for Class I structures only. UL Listed A420 C420 C420L Aluminum Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 1” U-BOLT BONDING CLAMP Cast U-Bolt bonding clamp for use with pipe or round bar from .400” to 1.315” Can be used with cable and wire sizes from #6 to 250 MCM. UL Listed 1” U-Bolt fits .400” to 1.315” O.D. pipes A421 Aluminum C421 Bronze C421L Lead Coated Bronze 2” – 8” U-BOLT BONDING CLAMPS Cast U-Bolt pipe clamps. Provides 1-1/2” of contact on pipe and cable. Use with all full size conductors. Fits pipe sizes 1.315” to 8.625”. UL Listed 2” U-Bolt fits 1.315” to 2.000” O.D. pipes A422 Aluminum C422 Bronze C422L Lead Coated Bronze 4” U-Bolt fits 2.75” to 4.50” O.D. pipes A424 Aluminum C424 Bronze C424L Lead Coated Bronze 8” U-Bolt fits 6.00” to 8.625” O.D. pipes A428 Aluminum C428 Copper C428L Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 3” U-Bolt fits 1.900” to 3.000” O.D. pipes A423 Aluminum C423 Bronze C423L Lead Coated Bronze 6” U-Bolt fits 4.50” to 6.75” O.D. pipes A426 Aluminum C426 Bronze C426L Lead Coated Bronze Pa ge 6 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 430 SECONDARY BONDING CLAMP Cast bolt tension secondary bonding lug for connections to VTR’s, roof drains, flashings, etc. For use with secondary wire. UL Listed A430 C430 C430L Aluminum Bronze Lead Coated Bronze 432 SECONDARY BONDING LUG Cast terminal bonding lug with 2 bolt tension on secondary wires. Lug can be secured with a screw, 1/4” drive-in anchor, or 1/4” bolt. For use with all secondary wires. UL Listed A432 C432 C432L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 S432BM Pa ge 6 4 Stainless Steel Bimetallic 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS 433 BONDING CLAMP Cast bolt tension bonding clamp with 3 square inches of contact secures to I-beams, purlin flange, etc. For use with all full size cables and secondary wires. UL Listed A433 C433 C433L Aluminum Bronze Lead Coated Bronze 434 SECONDARY BONDING CLAMP Cast bolt tension bonding clamp secures to I-beams, purlin flange, etc. For use with all full size cables and secondary wires. For secondary bond only. UL Listed A434 C434 C434L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS FLEXIBLE BONDING STRAP Extra flexible bonding strap for use in moving or vibrating metal objects. 3/4” X 1/8” thick. Two sizes standard 10” and 12”. Any size can be fabricated. 10” Strap A435 Aluminum C435 Tinned Copper 12” Strap A436 Aluminum C436 Tinned Copper SECONDARY BONDING STRAP 1-1/4” wide strap with a secondary terminal lug (catalog number 432) attached. Fits all secondary wires. Any size strap can be fabricated. UL Listed A438 C438 Aluminum strap for 2” pipe Tinned copper strap for 2” pipe A439 C439 Aluminum strap for 4” pipe Tinned copper strap for 4” pipe A440 C440 Aluminum strap for 6” pipe Tinned copper strap for 6” pipe Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com BONDING CLAMPS, PLATES AND LUGS PRIMARY BONDING STRAP 1-1/4” wide strap with a parallel cable connector (catalog number 310) attached. Fits all main size cables and secondary wires. Any size strap can be fabricated. UL Listed A442 C442 Aluminum strap for 2” pipe Tinned copper strap for 2” pipe A444 C444 Aluminum strap for 4” pipe Tinned copper strap for 4” pipe A446 C446 Aluminum strap for 6” pipe Tinned copper strap for 6” pipe A448 C448 Aluminum strap for 8” pipe Tinned copper strap for 8” pipe A450 C450 Aluminum strap for 10” pipe Tinned copper strap for 10” pipe A450X12 C450X12 Aluminum strap for 12” pipe Tinned copper strap for 12” pipe Note: For longer straps, please use Part # C450X_ _ with the “--” designating the diameter of the pipe. For Example: A tinned Copper strap for a 36” diameter pipe would be part number C450X36. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 6 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES PRIMARY WATER PIPE BONDING STRAP 2” wide strap with a parallel cable connector (catalog number 310) attached. Fits all main size cables. Any size strap can be fabricated. UL Listed A452 C452 Aluminum strap for 2” pipe Tinned copper strap for 2” pipe A454 C454 Aluminum strap for 4” pipe Tinned copper strap for 4” pipe A456 C456 Aluminum strap for 6” pipe Tinned copper strap for 6” pipe A458 C458 Aluminum strap for 8” pipe Tinned copper strap for 8” pipe A460 C460 Aluminum strap for 10” pipe Tinned copper strap for 10” pipe A460X12 C460X12 Aluminum strap for 12” pipe Tinned copper strap for 12” pipe Note: For longer straps, please use Part # C460X_ _with the “--” designating the diameter of the pipe. For Example: A tinned Copper strap for a 36” diameter pipe would be part number C460X36. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 6 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 481-483 ROD CLAMP Cast rod clamp has 1-1/2” on contact and two bolt tension. Used to bond all full size cable to open end rod. UL Listed A481 A482 A483 Aluminum 1/2” rod clamp Aluminum 5/8” rod clamp Aluminum 3/4" rod clamp C481 C481L C482 C482L C483 C483L Bronze 1/2” rod clamp Lead Coated Bronze 1/2” rod clamp Bronze 5/8” rod clamp Lead Coated Bronze 5/8” rod clamp Bronze 3/4” rod clamp Lead Coated Bronze 3/4” rod clamp P484 STEEL WELDING PLATE 1/4” mild steel plate used to provide anchor point for bonding plate. Plate comes with 1/4” tapped holes and hardware. Can be fabricated to fit any bonding plate or air terminal base (410 series, 412 series, 404 series, 406 series). Steel plate is welded to a steel column or beam and bonding plate is attached to welded plate. Specify bonding or base plate series at end of number. Bonding plate not included with steel plate. Example: P484XC410-Steel weld plate to connect C410 to plate P484XA252- Steel weld plate to connect A25212 to mount base Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 6 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THRU WALL, THRU ROOF & ACCESSORIES 485 WELD PLATE WITH 411 SERIES BOND PLATE Steel plate is welded to beam or column and 411 series bonding plate is attached. 1/4”x4”x4” Mild steel plate with 411 series bond plate. Bonding plate is included. A485 C485 C485L Steel welding plate with Aluminum 411 Steel welding plate with Brass 411 Steel welding plate with Leaded Brass 411 C486 Sillcock Bonding Clamp Cast bronze Sillcock water bonding clamp. Connects directly to the threads on the sill cock. Accepts cable and wire sizes from #6 to 250 MCM. UL Listed. C486 Sillcock Bonding Clamp Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 7 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THRU WALL, THRU ROOF & ACCESSORIES 500 THREADED ROD CLAMP Cast bolt tension cable clamp for use with one or two main size cables or secondary wires. Comes with 1/2” Stainless Steel nut and washer (catalog numbers S753 and S773). Fits over 1/2” all thread rod. Also available in 3/8” or 5/8”. Please add size after number. UL Listed A500 C500 C500L Aluminum Bronze Lead Coated Bronze 501 CAST CAP Cast cap for thru-rod with standard 2” Schedule 40 PVC pipe sleeve. Cable clamp accepts one or two main size cables or secondary wires. Center hub is threaded to accept standard 1/2” threaded rod. Use with appropriate sealer to insure a watertight joint. A501 C501 C501L Aluminum Bronze Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 502 CAST BASE PLATE Cast heavy duty base plate for thru-rod with standard 2” Schedule 40 PVC pipe sleeve. Designed with a recessed ring to easily attach to the PVC pipe and with three–1/4” holes to allow secure mounting to the roof deck. May be used above or below concrete or on metal roof decks. Center hub is threaded to accept standard 1/2” threaded rod. A502 C502 C502L Aluminum Bronze Lead Coated Bronze 503 CAST BASE PLATE AND CABLE CONNECTOR Cast combination base plate and cable connector for thru-rod with standard 2” Schedule 40 PVC pipe sleeve. Designed with a recessed ring to easily attach to the PVC pipe and with three–1/4” holes to allow secure mounting to the roof deck. Cable clamp accepts one or two main size cables. Center hub is threaded to accept standard 1/2” threaded rod. A503 C503 Aluminum Bronze C503L Lead Coated Bronze Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 1/2" threaded rod furnished with a cap (catalog number 501) and a combination base plate and cable connector (catalog number 503) with a 2-3/8” O.D. PVC sleeve. Cable clamps accept one or two main size cables. 1/2” x 12” threaded rod A504 Aluminum to Aluminum C504A Aluminum to Copper C504 Copper to Copper 1/2” x 18” threaded rod A505 Aluminum to Aluminum C505A Aluminum to Copper C505 Copper to Copper 1/2" x 24” threaded rod A506 Aluminum to Aluminum C506A Aluminum to Copper C506 Copper to Copper 1/2” threaded rod furnished with a cap (catalog number 501), a base plate (catalog number 502), and a 1/2” washer and nut (catalog numbers S773 and S753) with a 2-3/8” O.D. PVC sleeve. Can be used for systems using structural steel down leads. 1/2” x 12” threaded rod A507 Aluminum to Aluminum C507A Aluminum to Copper C507 Copper to Copper 1/2” x 18” threaded rod A508 Aluminum to Aluminum C508A Aluminum to Copper C508 Copper to Copper 1/2" x 24” threaded rod A509 Aluminum to Aluminum C509A Aluminum to Copper C509 Copper to Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 510-512 THRU ROD ASSEMBLY 1/2” threaded rod with both ends furnished with two parallel cable connectors (catalog number 500). Comes standard with 1/2” Neoprene washer for weatherproofing the outside terminal end. UL Listed 1/2” X 12” Threaded Rod A510 Aluminum to Aluminum C510A Aluminum to Copper C510 Copper to Copper 1/2” X 24” Threaded Rod A512 Aluminum to Aluminum C512A Aluminum to Copper C512 Copper to Copper 1/2” X 18” Threaded Rod A511 Aluminum to Aluminum C511A Aluminum to Copper C511 Copper to Copper 515-517 THRU ROD ASSEMBLY 1/2” threaded rod furnished with a parallel cable connector (catalog number 500) and a swivel air terminal adaptor (catalog number 130 series). Comes standard with 1/2” Neoprene washer for weatherproofing the outside terminal end. UL Listed 1/2” X 12” Threaded Rod A515 Aluminum to Aluminum C515A Aluminum to Copper C515 Copper to Copper 1/2” X 24” Threaded Rod A517 Aluminum to Aluminum C517A Aluminum to Copper C517 Copper to Copper 1/2” X 18” Threaded Rod A516 Aluminum to Aluminum C516A Aluminum to Copper C516 Copper to Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 518-519 THRU-ROD ASSEMBLY WITH 1” PVC 1/2” Threaded Rod housed in 1” Schedule 40 PVC. Furnished with a 500 Series cable connector at the top end. They both have an optional 8 square inch flat surface base or an 8 square inch flat base with a straight base extension cable connection. Standard sizes are 18” and 24”. A518 A518NC 18” THRU ROD ASSEMBLIES 18” Aluminum thru rod assembly with mounting plate and straight base 18” Aluminum thru rod assembly with only mounting plate C518 18” Brass thru rod assembly with mounting plate and straight base C518NC 18” Brass thru rod assembly with only mounting plate C518A 18” thru rod with Aluminum top and Brass bottom C518ANC 18” thru rod with Aluminum top and Brass bottom only mounting plate A519 A519NC C519 C519NC C519A C519ANC 24” THRU ROD ASSEMBLIES 24” Aluminum thru rod assembly with mounting plate and straight base 24” Aluminum thru rod assembly with only mounting plate 24” Brass thru rod assembly with mounting plate and straight base 24” Brass thru rod assembly with only mounting plate 24” thru rod with Aluminum top and Brass bottom 24” thru rod with Aluminum top and Brass bottom only mounting plate Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 7 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THRU WALL, THRU ROOF & ACCESSORIES 520-522 THRU ROD ASSEMBLY 1/2” threaded rod furnished with a parallel cable connector (catalog number 500) and a cable connector (catalog number 412). Comes standard with 1/2” Neoprene washer for weatherproofing the outside terminal end. UL Listed 1/2” X 12” Threaded Rod A520 Aluminum to Aluminum C520A Aluminum to Copper C520 Copper to Copper 1/2” X 24” Threaded Rod A522 Aluminum to Aluminum C522A Aluminum to Copper C522 Copper to Copper 1/2” X 18” Threaded Rod A521 Aluminum to Aluminum C521A Aluminum to Copper C521 Copper to Copper 525-527 THRU ROD ASSEMBLY 1/2” threaded rod furnished with a parallel cable connector (catalog number 500) and a straight base (catalog number 235). Comes standard with 1/2” Neoprene washer for weatherproofing the outside terminal end. UL Listed 1/2” X 12” Threaded Rod A525 Aluminum to Aluminum C525A Aluminum to Copper C525 Copper to Copper 1/2” X 24” Threaded Rod A527 Aluminum to Aluminum C527A Aluminum to Copper C527 Copper to Copper 1/2” X 18” Threaded Rod A526 Aluminum to Aluminum C526A Aluminum to Copper C526 Copper to Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 528 THRU ROD ASSEMBLY WITH PVC CAP 1/2” threaded rod furnished with a parallel cable connector (catalog number 500), a straight base (catalog number 235HSS) and a 1” PVC cap (catalog number P537). Assembly fits over 1” PVC conduit in order to form a water-tight connection to the conductor inside the conduit. Add suffix 15 for 1-1/2” cap or 2 for 2” cap. A528 C528 C528A Aluminum to Aluminum thru rod with 1” PVC cap Copper to Copper thru rod with 1” PVC cap Copper to Aluminum thru rod with 1” PVC cap A528x15 C528x15 C528Ax15 Aluminum to Aluminum with 1-1/2” Cap Copper to Copper with 1-1/2” Cap Copper to Aluminum 1-1/2” Cap A528x2 C528x2 C528Ax2 Aluminum to Aluminum with 2” Cap Copper to Copper with 2” Cap Copper to Aluminum with 2” Cap Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 529 THRU ROD ASSEMBLY 1/2” threaded rod furnished with a straight connector (catalog number 235) and an air terminal coupling (catalog series 120). Comes standard with 1/2” neoprene washer for weather proofing the outside terminal end. UL Listed. 12” Length A529X12 C529X12A C529X12 Aluminum to Aluminum Aluminum to Copper Copper to Copper 18” Length A529X18 C529X18A C529X18 Aluminum to Aluminum Aluminum to Copper Copper to Copper 24” Length A529X24 C529X24A C529X24 Aluminum to Aluminum Aluminum to Copper Copper to Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES 530 THRU ROD ASSEMBLY WITH PVC CAP 1/2” threaded rod furnished with two straight bases (catalog number 235H) and a 1” PVC cap (catalog number P537). Assembly fits over 1” PVC conduit in order to form a watertight connection to the conductor inside the conduit. Add suffix 15 for 1-1/2” cap or 2 for 2” cap. Used to connect aluminum and copper cables thru 1” PVC. UL Listed. A530 C530 C530A Aluminum to Aluminum thru rod with 1” PVC cap Copper to Copper thru rod with 1” PVC cap Copper to Aluminum thru rod with 1” PVC cap A530X15 C530X15 C530AX15 Aluminum to Aluminum with 1-1/2” Cap Copper to Copper with 1-1/2” Cap Copper to Aluminum 1-1/2” Cap A530X2 C530X2 C530AX2 Aluminum to Aluminum with 2” Cap Copper to Copper with 2” Cap Copper to Aluminum with 2” Cap 531 PITCH PAN Copper or galvanized steel pitch pan reservoir is standard 3” high x 2” in diameter. Other sizes available to meet specific needs. Base flashing has 4” on all sides. For built up roofing systems. G531 C531 Galvanized steel Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 7 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com THRU WALL, THRU ROOF & ACCESSORIES P532 RUBBER BOOT Pipe flashing boot constructed of Ethylene Propylene Diene Monomer (EPDM). Use on single ply membrane roofs in conjunction with catalog numbers 533 and 534. P532 EPDM Flashing Boot 533 FLASHING ADAPTOR 534 PIPE FLASHING CLAMP Flashing adaptor and clamp used to seal EPDM Flashing boot to thru-roof connectors. Adaptor is available in Aluminum and Brass and is 1” in diameter and 1” high. Furnished for 3/8”, 1/2”, and 5/8” thru-roofs. Specify when ordering. A533 C533 P534 Aluminum Brass Stainless Steel Flashing Clamp Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 8 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THRU WALL, THRU ROOF & ACCESSORIES P537 PVC CAP 1” PVC cap for use in sealing thru-roof penetrations with 1” PVC conduit. P537 P537x15 P537x2 1” PVC Cap with 1/2” hole 1-1/2” PVC Cap with 1/2” hole 2” PVC Cap with 1/2” hole 540 FLASHING CONE Cast flashing cone used to seal thru-roof penetrations. A540 C540 Aluminum Bronze 541 ROOF FLASHING SADDLE Stamped flashing saddle for use with concealed air terminals or thru-roof penetrations. Standard size is 2-1/2” x 4”. Other sizes can be fabricated. Please specify dimensions when ordering other than the standard size. UL Listed. A541 C541 Aluminum Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 8 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com THRU WALL, THRU ROOF & ACCESSORIES S544 FLASHING WASHER Stainless steel flashing washer with 9/16” center hole. 1/8” thick and 3”square. S544 Flashing Washer Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING GROUND RODS We offer Copperclad, solid Copper, Stainless Steel, and sectional ground rods in various lengths. CC represents Copperclad and C represents solid Copper. The suffix “S" represents sectional. UL Listed. Copper Clad Ground Rods CC600 1/2" x 8’ CC601 1/2" x 10’ CC603 5/8” x 8’ CC604 5/8” x 10’ CC607 3/4" X 10’ Sectional Ground Rods CC600S 1/2" x 8’ CC601S 1/2" x 10’ CC603S 5/8” x 8’ CC604S 5/8” x 10’ CC607S 3/4" X 10’ Solid Copper Ground Rods C600 1/2" x 8’ C601 1/2" x 10’ C603 5/8” x 8’ C604 5/8” x 10’ C607 3/4" X 10’ Stainless Steel Ground Rods S600 1/2” x 8’ S601 1/2” x 10’ S603 5/8” x 8’ S604 5/8” x 10’ S607 3/4” x 10’ UL Listed 96 UL Listed 96 AIRCRAFT TIE DOWN ANCHOR Copperclad aircraft tie down ground rods. Other sizes available upon request. See also CC607TD. UL Listed. CC607A 3/4" x 9 1/2' Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 8 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING TIE DOWN ASSEMBLY Copper Clad Sectional Ground Rod complete with catalog no.C618 eyelet. Used to tie down aircraft or provide a static discharge point. Assembly provides easier installation of rod and eyelet screws onto top. UL Listed. A coupling and driving stud are needed to drive the ground rod but are not provided with this assembly. We suggest a coupling and driving stud, under normal conditions should last about 7 assemblies. CC607TD 3/4" x 10’ ground rod with grounding eyelet. GROUND ROD ASSEMBLY Assembly consists of 2 sections 5’ long of ground rods and 1 threadless coupling. Eliminates oversize charges for shipping long ground rods. Available for both Copper Clad and stainless steel ground rods. UL Listed. CC601KIT CC604KIT CC607KIT CC604KIT CC607KIT 1/2" Copper Clad ground rod kit 5/8” Copper Clad ground rod kit 3/4" Copper Clad ground rod kit 5/8” Stainless Steel ground rod kit 3/4” Stainless Steel ground rod kit Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 8 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING ENHANCED GROUND RODS Enhanced ground rods are used in high resistivity soils to provide a low resistance ground. Each kit includes an enhanced ground rod, inspection well, P628 ground enhancement material and a 4/0 Copper pigtail 4’ in length. Can be purchased for either vertical or horizontal installation. Standard sizes are shown below; contact our Sales Department for other sizes, options and pricing. EGR 10V 4/0 EGR 20V 4/0 EGR 10H 4/0 EGR 20H 4/0 10’ Vertical Enhanced Ground Rod 20’ Vertical Enhanced Ground Rod 10’ Horizontal Enhanced Ground Rod 20’ Horizontal Enhanced Ground Rod CC610 HELIX DRIVING ANCHOR Copper clad helix driving anchor, used to drive threaded tie down rods. CC610X58 CC610X34 Helix driving anchor for 5/8” tie down rod Helix driving anchor for 3/4” tie down rod Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING THREADED COUPLING Ground rod coupling used to connect sectional ground rods. Machined from tough Copper Alloy. UL Listed. C611 C612 C613 1/2” Threaded coupling for full size rods 5/8” Threaded coupling for nominal rods 3/4” Threaded coupling for nominal rods COMPRESSION COUPLING Threadless ground rod coupling used to connect two pointed ground rods. The coupling is tapered so the parts compress, when driving the rod, to form a conductive connection. Allows for quick and easy installation. Available for copper bond or stainless steel ground rods. UL Listed. C611CC C612CC C613CC 1/2” Compression coupling for full size rod 5/8” Compression coupling for nominal rods 3/4” Compression coupling for nominal rods S612CC S613CC 5/8” Compression coupling for nominal rods 3/4” Compression coupling for nominal rods Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING DRIVING STUD Ground rod driving stud for use in protecting the threads on sectional ground rods. Will protect about 20 ground rods under normal conditions. S615 Driving stud for 1/2” full size S616 Driving stud for 5/8” nominal S617 Driving stud for 3/4” nominal AIRCRAFT GROUNDING EYELET Cast bronze grounding eyelet. Provided with threads to screw onto sectional ground rods. Provides a static discharge tie down point for aircraft. Can withstand 9000lbs. of pulling force. UL Listed. C61812 C61858 C61834 Bronze eyelet with 1/2" internal threads Bronze eyelet with 5/8” internal threads Bronze eyelet with 3/4" internal threads Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 8 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING ONE CONNECTION GROUND PLATE TWO CONNECTION GROUND PLATE .032 thick high conductivity Copper sheet with either one or two bonding plates (catalog number C410) attached to plate. Any size can be fabricated. UL Listed One plate attached C619 12” X 12” (1 square foot) C620 12” X 24” (2 square feet) C621 18” X 18” (2 1/3 square feet) C622 36” X 36” (9 square feet) Two plates attached C623 12” X 24” (2 square feet) C624 18” X 18” (2 1/3 square feet) C625 36” X 36” (9 square feet) CGP1236P 12”X36” Copper Plate with Bond Plate CGP24242P 24”X24” Copper Plate with Two Bonding Plates Note: Both the top and bottom surfaces of the ground plate may be used to calculate the 2 square foot requirements for UL 96. GROUNDPLATE WITH EXOTHERMIC WELD PIGTAIL EXOTHERMIC WELD GROUND PLATES CGP181824C56-19 Copper 18” x 18” Ground Plate with 2’ of C56-19 (2/0-19) Bare Copper Cable ANY SIZE CAN BE FABRICATED Description for ordering: CGP __ __ __ __ __ Copper ground thickness width of plate length of length of cable for pigtail plate (decimals) (inches) plate pigtail (use cable section (inches) (inches) for cable options) Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING P627 BENTONITE CLAY Western Bentonite Clay is a natural earth clay backfill material that improves the soil conditions for grounding. It absorbs water and moisture to lower ground resistance. Available in 50lb. bags. P627 Bentonite Clay P628 ELECTRODE BACKFILL MATERIAL Low resistance carbon based backfill material. Lowers ground system resistance in difficult soil situations. Ideal for use in rocky soil, sand, gravel or any other high resistance soil conditions. Available 25lb. bags. P628 Electrode Backfill Material P629 TIE DOWN ROD DRIVER Used to drive 3/4” tie down anchors (PLP Part # CC607A) without deforming the top eye loop. P629 Driving head for CC607A Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 8 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING C630 PROTECTOR PIPE Copper tube 6’-8” long protector pipe. For use where cables are subject to displacement or damage on Class I structures only and with cables through 1/2” diameter. Use lead wedge to make electrically continuous with conductor. Secure to wall with catalog number C706L. C630 Copper Protector Pipe C630L Copper Protection Pipe Leaded C631 PROTECTOR PIPE Copper tube 6’-8” long with set screw collars at both ends to bond pipe. 3/4” O.D. tube is used where cables are subject to displacement or damage. Secure with catalog number C707L. C631 Copper Protector Pipe PVC PROTECTOR PIPE Polyvinylchloride (PVC) protector pipe-for use where cables are subject to displacement or damage. Schedule 40 and sunlight resistant. Secure with catalog number G706, C706LPVC, G707, or C707LPVC. P631 P631-4 3/4” I.D. X 10’ 3/4” I.D. X 4’ P636 P636-4 1-1/2” I.D. X 10’ 1/1/2” I.D. X 4’ P632 P632-4 1” I.D. X 10’ 1” I.D. X 4’ P637 P637-4 2” I.D. X 10’ 2” I.D. X 4’ Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 9 0 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING P633 WOOD PROTECTOR 2” wide treated wood molding 8’ long protects cables that are subject to displacement or damage. For cables up to 3/4” diameter. Secure with catalog number G708. P633 Wood protector G634 GALVANIZED PROTECTOR 1” rigid galvanized conduit with PVC insert to protect cables that are subject to displacement or damage. Provided with 2 bonding screws. Available for all cable and secondary wire sizes. Secure with G707R. G634 Galvanized protector with PVC insert 10’ long. 641-643 GROUND ROD CLAMPS Cast Bronze ground rod clamp has 1-1/2” of contact and two bolt tension. Available for 1/2”, 5/8”, or 3/4” ground rods. UL Listed C641 1/2” Ground Rod Clamp C642 5/8” Ground Rod Clamp C643 3/4” Ground Rod Clamp Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 1 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING C645 U-BOLT GROUND ROD CLAMP Cast U-Bolt bonding clamp for use with pipe or round bar from .400” to 1.315” Can be used with cable and wire sizes from #6 to 250 MCM. UL Listed C645 C645L U-Bolt Ground Rod Clamp U-Bolt Ground Rod Clamp Leaded P648 DEPRESSION FORM Plastic form, 3” x 6” x 3” deep, to pour concrete around aircraft tie-down anchor (catalog number CC607A). P648 Depression Form Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 2 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING PVC GROUND ACCESS WELL PVC ground access well with 10”or 12” ID diameter. Galvanized steel lid included. 10” diameter P649 P650 P651 P652 12” diameter P654 P655 P656 P657 12” long 18” long 24” long 36” long GALVANIZED STEEL LID 12” long 18” long 24” long 36” long For use with 10” or 12” PVC ground well. P659 10” Lid P660 12” Lid Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 9 3 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING LEAD WEDGE Lead wedge used to make conductor electrically continuous with metallic protector at entrance and exit points. P661 P662 P663 P664 Use with 1/2” ID Pipe Use with 5/8” ID Pipe Use with 3/4” ID Pipe Use with 1” ID Pipe DRIVING SLEEVE Steel ground rod driving sleeve to prevent mushrooming on top of ground rod. Made from heat-treated, stress-proof steel. P670 P671 P672 For 1/2” Ground Rod For 5/8” Ground Rod For 3/4” Ground Rod REBAR BONDING ASSEMBLY Prefabricated Rebar Bonding Assembly with a 5’ piece of Copper Conductor, Exothermic Welded to an 18” long piece of #4 Rebar. Rebar can be welded or tied to construction steel to form bond. UL Listed. C673xC52 Rebar with C52 cable (Class I System) C673xC56 Rebar with C56 cable (Class II System) C673xC59 Rebar with C59 (4/O) cable Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 4 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING REPLACEMENT STUDS, INSERTS AND CHAINS Brass inserts for Static Ground Receptacles. Used as replacements or mounted to bus bars. Also available is the lid retention chain. C674x12 Ball Stud with 1/2” Threads C674CHAIN C674x38TS C674x12TS C674x58TS “T” Style insert with 3/8” Threads “T” Style insert with 1/2” Threads “T” Style insert with 5/8” Threads Chain replacement for lid 675 STATIC GROUND RECEPTACLE, THREADED, WITH CABLE CONNECTOR Cast Brass Static Ground Receptacle with either rounded ball stud or “T” style insert. Cover plate has chain retention. Designed to couple onto threaded rod or ground rod. Comes with a cable connector for attaching ground cables. Can be threaded for any size up to 1”. Please designate thread size when ordering. Receptacle is 3” diameter and 3 1/2” tall. UL Listed. C675 C675TS Brass Ground Receptacle with Ball Stud and cable connector Brass Ground Receptacle with “T” Style insert and cable connector Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 5 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING C676 STATIC GROUNDING RECEPTACLE, THREADED Cast Bronze static grounding receptacle, threaded, for use on threaded rod or sectional ground rods. Can be threaded for any size up to 1”. Please designate thread size when ordering. Same as C675 without the cable connector. Standard receptacle is 3” diameter and 3 1/2” tall. Also available with 4 1/2” diameter and 4” tall receptacle. C676 C676TS C677 C677TS Static Grounding Receptacle with Ball Stud Static Grounding Receptacle with “T” style insert Static Ground Receptacle 4 1/2” Diameter with Ball Stud Static Ground Receptacle 4 1/2” Diameter with “T” style insert C678 STATIC GROUNDING RECEPTACLE, EXOTHERMIC Cast Bronze static ground receptacle to exothermic weld on 5/8” or 3/4” ground rod. Receptacle is 2 3/4” diameter and 4 1/2” tall. Lid has chain retention. C678 Static Grounding Receptacle Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 6 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com GROUNDING C680 C681 – C682 CONCRETE GROUND PLATE When cast into concrete structures these offer grounding points for equipment, machinery, etc. Made from high quality Copper Alloy and can be connected easily to Copper cable with exothermic welds. C680 C681 C682 2 holes (1/2” diameter) to weld to 4/0 cable 4 holes (3/8” diameter) to weld to 4/0 cable 4 holes (1/2” diameter) to weld to 4/0 cable Other configurations available. BUS BAR MOUNTING BRACKETS Stainless Steel brackets to mount bus bars. S690 S691 Stainless Steel bracket for 2” bus bar Stainless Steel bracket for 4” bus bar Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 9 7 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com GROUNDING STAND OFF INSULATOR Standoff insulator, manufactured from fiberglass. Two sizes available. P695 P696 Red Insulator – 1-1/2” length with 5/16” threaded holes Red Insulator – 2” length with 3/8” threaded holes GROUNDING AND BUS BARS Many different options are available for our bus bar grounding products. Please contact our Sales Department for more information on whole configurations, sizes, and options. All bus bar components can be purchased individually or as a kit. UL Listed 96. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 8 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS 702 LOOP 1/2” wide loop–secure with a single nail or screw. For use with all Class I cables or secondary bonding wires. UL Listed A702 C702 C702L Aluminum Copper Lead Coated Copper 703 LOOP 1/2” wide loop with two holes–secure with nails or screws. For use with all Class I cables or secondary bonding wires. UL Listed A703 C703 C703L Aluminum Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 9 9 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS 704 LOOP 5/8” wide loop–secure with a single nail, screw, 1/4” bolt, or 1/4” drive-in anchor. For use with all cables or secondary bonding wires. UL Listed A704 A704x3/8 C704 C704L C704x3/8 C704x3/8L Aluminum Aluminum with 3/8” holes Copper Lead Coated Copper Copper with 3/8” holes Lead Coated Copper with 3/8” holes 705 LOOP 5/8” wide loop with two holes–secure with nails, screws, 1/4” bolts, or 1/4” drive-in anchors. For use with all cables or secondary bonding wires. UL Listed A705 C705 C705L Aluminum Copper Lead Coated Copper Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 00 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS C706 - C707 PROTECTOR PIPE STRAP Tinned Copper strap with one fastening hole. Used to secure catalog numbers C630, C631, OR P631protector pipes. C706 fits pipe up to 3/4" O.D. and C707 fits pipe up to 1” O.D. UL Listed C706L C707L Tinned Copper Strap for use on C630 up to 3/4” O.D. Tinned Copper Strap for use on C631 up to 1” O.D. C706LPVC C707LPVC Tinned Copper Strap for use on 3/4” PVC up to 1” O.D. Tinned Copper Strap for use on 1” PVC up to 1-1/4” O.D G706 – G707 PROTECTOR PIPE STRAP Galvanized EMT 1-hole strap. Used to secure catalog numbers P631 and P632 protector pipes. G706 fits pipes up to 3/4” I.D. And G707 fits pipes up to 1” O.D. G706 G707 G707R G707X1-1/2 G707X2 Galvanized PVC strap for securing 3/4” I.D. Schedule 40 PVC Galvanized PVC strap for securing 1” I.D. Schedule 40 PVC Galvanized strap for securing 1” rigid conduit Galvanized PVC strap for securing 1-1/2” I.D. Schedule 40 PVC Galvanized PVC strap for securing 2” I.D. Schedule 40 PVC G708 WOOD PROTECTOR STRAP Galvanized steel strap used for securing catalog number P633 wood protector. Provided with two 5/16” mounting holes. G708 Galvanized steel strap Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 01 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com FASTENERS 709 ADHESIVE STAND-OFF CABLE HOLDER Adhesive stand-off cable holder is comprised of a flat base (catalog number 252), 1/2” threaded rod (catalog number A75, C75 or S75) and a threaded rod clamp (catalog number 500). Designed to assist in maintaining the 3:12 rise between the roof surface and thru-rod connections or top of parapet. UL Listed A709-6 C709-6 C709-6L A709 C709 C709L Aluminum 6” length Copper 6” length Lead Coated Copper 6” length Aluminum 12” length Copper 12” length Lead Coated Copper 12” length 710 STAND-OFF CABLE HOLDER Cast stand-off cable holder. Has up to 1-1/2” standoff with 1/2” threads. UL Listed A710 C710 C710L Aluminum Bronze Lead Coated Bronze Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 02 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS 711 CAST ADHESIVE CABLE HOLDER Cast adhesive cable holder with bolt tension cable clip. For use with all full and secondary cables. UL Listed A711 C711 C711L Aluminum Bronze Lead Coated Brass 712 STAMPED ADHESIVE CLIP Stamped adhesive cable clip with three compression type fingers to hold the cable securely to the roof. Middle finger stamped so the adhesive does not interfere with the anchoring process. For use with all main size cables and secondary bonding wires. UL Listed. A712 C712 C712L C712C Aluminum Brass Lead Coated Brass Copper Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 03 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com FASTENERS STANDING SEAM CLIP Cable holder for standing seam has a 3/4” groove to fit over most seams. Cable holder is adjustable so cables can run perpendicular or parallel. Single set screw holds clip to seam. Loop and cable anchored to clip using self tapping screw (catalog number S725) or 1/4” bolt (catalog number S732). UL Listed Clip with self tapping screw A713 Aluminum C713 Bronze C713L Lead Coated Bronze Clip with 1/4” bolt A714 Aluminum C714 Bronze C714L Lead Coated Bronze CABLE TO PIPE STRAPS Secures air terminals or full size cable to pipes. Four sizes are standard but any size can be fabricated. UL Listed. Please also see catalog #960-966U for additional securing devices. A715 C715 Aluminum--pipe size 1.900” O.D. Tin Plated Copper–pipe size 1.900” O.D. A716 C716 Aluminum--pipe size 2.375” O.D. Tin Plated Copper–pipe size 2.375” O.D. A717 C717 Aluminum--pipe size 3.500” O.D. Tin Plated Copper–pipe size 3.500” O.D. A718 C718 Aluminum--pipe size 4.500” O.D. Tin Plated Copper–pipe size 4.500” O.D. A719 C719 Aluminum pipe size 6” O.D. Tinned Copper pipe size 6” O.D. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 04 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com FASTENERS P720 RUBBER WELL NUT P720 1/4” X 1” Rubber well nut STAINLESS STEEL AND COPPER NAILS C722 S721 S722 S723 2” Copper Roofing Nail 4d Stainless Steel ring shank nail – 1-1/2” length 6d Stainless Steel ring shank nail – 2” length 8d Stainless Steel ring shank nail – 2-1/2” length STAINLESS STEEL NEEDLE POINT SCREW S727NP #10 X 1-1/2” Needle point screw with 1/4” head STAINLESS STEEL SELF DRILLING SCREW S724 S725 S726 S727 S728 S728X3 #10 X 3/4” Self drilling screw #10 X 1” Self drilling screw #10 X 1-1/4” Self drilling screw #10 X 1-1/2” Self drilling screw #10 X 2” Self drilling screw #12 X 3” Self drilling screw Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 05 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com FASTENERS STAINLESS STEEL SELF DRILLING SCREW WITH NEOPRENE WASHER S725W S727W S728 W #10 x 1” Self drilling screw with neoprene washer #10 x 1-1/2” Self drilling screw with neoprene washer #10 x 2” Self drilling screw with neoprene washer P729 DRIVE-IN ANCHOR P729 S729x1 S729 1/4” x 1-1/4” Zinc Drive-In Anchor 1/4” x 1” Stainless Steel Drive-In Anchor 1/4” x 1-1/4” Stainless Steel Drive-In Anchor FLAT HEAD BOLT S732F S738F S747F S749F S749x2F 1/4” x 1” 5/16” x 1-1/4” 1/2” x 3/4” 1/2” x 1-1/2” 1/2” x 2” Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 06 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS STAINLESS STEEL BOLTS SHB725 S730 S731 S732 S733 S734 S734x2 S734x225 S735 S736 HEX HEAD BOLTS-FULL THREADS #10 X 1” 1/4” x 1/2” S737 5/16” x 1” 1/4” x 3/4” S738 5/16” x 1-1/4” 1/4” x 1” S739 5/16” x 1-1/2” 1/4” x 1-1/4” S740 5/16” x 2” 1/4” x 1-1/2” S741X58 3/8” x 5/8” 1/4” x 2” S741 3/8” x 3/4” 1/4” x 2-1/4” S742 3/8” x 1” 5/16” x 3/4” S743 3/8” x 1-1/4” 5/16” x 7/8” S745 3/8” x 2” S747 1/2” x 3/4” S749X2 1/2" x 2” CARRIAGE BOLTS SOCKET SET SCREWS Stainless Steel S793 S794 S739CB 5/16” x 1-3/4" 5/16” x 1/2” 5/16” x 3/4” Brass C793 C794 5/16” x 1/2” 5/16” x 3/4” Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 07 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS FLAT WASHER Stainless Steel S750 1/4” S751 5/16” S752 3/8” S753 1/2” S754 5/8” S754X34 3/4” Brass C754 LOCK WASHER 5/8” EXTERNAL TOOTH Stainless Steel S755 1/4” S756 5/16” S756XT 5/16” external tooth lock washer S757 3/8” S758 1/2” S758XT 1/2” external tooth lock washer S759 5/8” S759X34 3/4” Brass C759XT 5/8” external tooth lock washer Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 08 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS NEOPRENE WASHER P760 P761 P762 P763 P764 #10 1/4” 5/16” 3/8” 1/2” NUT Stainless Steel S769 #10 S770 1/4” S771 5/16” S772 3/8” S773 1/2” S774 5/8” S774x34 3/4” Brass Jam Nut C774 S772JN S773JN S774JN 5/8” 3/8” 1/2” 5/8” LEAD EXPANSION ANCHOR P776 P778 P779 1/4” Lead Expansion Anchor 3/8” Lead Expansion Anchor 1/2” Lead Expansion Anchor Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 09 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com FASTENERS EXPANSION ANCHOR SET TOOL P776SET P778SET P779SET 1/4" Expansion Anchor Set Tool 3/8” Expansion Anchor Set Tool 1/2" Expansion Anchor Set Tool U-BOLTS Stainless Steel S775 1” U-Bolt S776 2” U-Bolt S777 3” U-Bolt S778 4” U-Bolt S779 6” U-Bolt S779X8 8” U-Bolt Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 10 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com ADHESIVE P780 SILICONE SEALANT P780 100% silicone rubber sealant–10 oz tube. Please indicate color for M-1 Greenlock with the following suffix: AL-AlumGrey B-Black W-White P783 M-1 P783 M-1 Structural Adhesive/Sealant–10.1 oz tube. P784-GREEN LOCK ADHESIVE P784 Green Lock Structural Adhesive Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 11 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com ADHESIVE P785-P786 POURABLE SEALER A fast drying two part mix rubber adhesive for membrane roofing. Always verify compatibility of adhesive with roofing contractor and/or manufacturer. Sold by the gallon. Available from two manufacturers. P785 P786 Firestone pourable sealer Carlisle pourable sealer NOTE: Improper selection of adhesive may cause serious damage to the roof. Always verify adhesive materials with the roofing contractor and/or manufacturer. P789 DURALINK P789 Duralink Super Adhesion Sealant Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 12 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com ACCESSORIES P801 DECORATIVE GLASS BALLS 4-1/2” diameter decorative glass ball. Please designate color when ordering. P801-Red P801-Blue P801-Green P801-White P801-Amber Decorative Glass Ball Red Decorative Glass Ball Blue Decorative Glass Ball Green Decorative Glass Ball White Decorative Glass Ball Amber 805 BUSHING Bushing to secure decorative glass ball to air terminal. A805 C805 Aluminum Copper S807 CABLE SPOOLER Steel frame to hold spool of cable. S807 Cable Spooler Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 13 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com ACCESSORIES WEATHERVANES AVAILABLE: P810 Dart Vane P811 Horse Weathervane P812 Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Cow Weathervane Pa ge 1 14 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com ACCESSORIES P813 Bull Weathervane P814 Pig Weathervane P815 Rooster Weathervane Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 15 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com ACCESSORIES DECORATIVE FINIALS C820 C821 16” Brass Finial 27” Decorative Finial Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 16 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com INDUSTRIAL STACK EQUIPMENT COPPER CABLES C901 Bare Copper Cable–(Same as C55) 28 strands of 14 gauge Bare Copper wire. Rope lay cable–115,080 cm of conductivity. Weight per 1000’–380 lbs. UL Listed C901LC Lead Covered Cable-28 strands of 14 gauge Bare Copper wire with continuous 1/16” (1.59mm) pure lead sheath. Rope lay cable–115,080 cm of conductivity. Weight per 1000’–1,380 lbs. UL Listed C902 4/0 AWG Bare Copper Cable-19 strands of .1055 Copper wire. Concentric cable–211,600 cm of conductivity. Weight per 1000’–653 lbs. UL Listed C902LC 4/0 AWG Lead Coated Copper Cable-19 strands of .1055 Copper wire with continuous 1/16” (1.59mm) pure lead sheath. Concentric cable– 211,600 cm of conductivity. Weight per 1000’–1,983 lbs. UL Listed Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 17 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT AIR TERMINALS All Air Terminals are available in Stainless Steel, solid Copper, or solid Copper with 1/16” lead jacket. Air terminals can be ordered with a standard 2” taper or safety tipped. UL Listed. Available in any length greater than 18”. UL Listed. DESCRIPTION FOR ORDERING Prefix C -Designates Copper Prefix S-Designates Stainless Steel First Two Numbers-Designates Air Terminal Diameter Second Two Numbers-Designates Air Terminal Length Suffix LC-Designates Lead Coated Suffix ST-Designates Safety Tipped Example: C5824LC Copper 5/8”x24” Air Terminal with 1/16” Lead jacket Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 18 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com INDUSTRIAL STACK EQUIPMENT STACK BASES SIDE-MOUNT STACK BASE WITH HORIZONTAL CABLE CONNECTION Heavy duty Brass casting for use with 5/8” or 3/4” air terminal to horizontal cable run. Optional 1/2” bolt with 7/8” or 1-1/2” threads for connection to anchor. Accepts Class II or 4/0 cables. Please specify size when ordering 5/8” or 3/4”. UL Listed No mounting hardware provided. C910 C910LC Heavy Duty Brass--no Anchor Bolt Lead Covered Heavy Duty Brass--no Anchor Bolt Provided with 1/2” mounting stud C911 C911LC C911 LG C911LCLG Heavy Duty Brass with 7/8” stud and P940 lead anchor Lead Covered Brass with 7/8” stud length and P940 lead anchor Heavy Duty Brass with 1-1/2” stud length Lead Covered Heavy Duty Brass with 1-1/2” stud length Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 19 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT STACK BASES SIDE-MOUNT FOUR-WAY STACK BASE Heavy duty brass casting for use with 5/8” or 3/4” air terminal to a horizontal cable run and a vertical cable run. Optional 1/2” bolt with 7/8” or 1-1/2” threads for connection to anchor. Accepts Class II or 4/0 cables. Please specify size when ordering 5/8” or 3/4”. UL Listed No mounting hardware provided. C912 C912LC Heavy Duty Brass--no Anchor Bolt Lead Covered Heavy Duty Brass--no Anchor Bolt Provided with 1/2” mounting stud. C913 C913LC C913LG C913LCLG Heavy Duty Brass 7/8” stud and P940 lead anchor Lead Covered Brass with 7/8” stud length and P940 lead anchor Heavy Duty Brass with 1-1/2” stud length Lead Covered Heavy Duty Brass with 1-1/2” stud length Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 20 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com INDUSTRIAL STACK EQUIPMENT STACK BASES TOP MOUNT BASE Heavy duty brass casting for use with 5/8” or 3/4” air terminal to a horizontal cable run. Optional 1/2” bolt with 7/8” or 1-1/2” threads for connection to anchor. Accepts Class II or 4/0 cables. Please specify size when ordering 5/8” or 3/4”. UL Listed No mounting hardware provided. C916 C916 LC Heavy Duty Brass Lead Covered Heavy Duty Brass Provided with 1/2” mounting stud. C917 C917LC C917LG C917LCLG Heavy Duty Brass 7/8” stud and P940 lead anchor Lead Covered Brass with 7/8” stud length and P940 lead anchor Heavy Duty Brass with 1-1/2” stud length Lead Covered Heavy Duty Brass with 1-1/2” stud length Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 21 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com INDUSTRIAL STACK EQUIPMENT CABLE SPLICERS PARALLEL CABLE SPLICER Heavy duty Brass parallel cable splicer with 3” of contact. For use with Class II or 4/0 cables. UL Listed C921 C921 – LC Heavy Duty Brass Lead Covered Heavy Duty Brass STRAIGHT CABLE SPLICER Heavy duty brass straight cable splicer. For use with Class II or 4/0 cables. UL Listed C923 C923 – LC Heavy Duty Brass Lead Covered Heavy Duty Brass CROSS RUN SPLICER Heavy duty brass cross run splicer. For use with Class II or 4/0 cables. UL Listed C924 C924LC Heavy Duty Brass Lead Covered Heavy Duty Brass Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 22 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT “T” SPLICER Heavy duty brass “T” splicer. For use with Class II or 4/0 cables. UL Listed. C925 C925LC Heavy Duty Brass Lead Covered Heavy Duty Brass 926 AIR TERMINAL CONNECTOR Used to connect lead covered cables to an air terminal or small round metal surface. Available for 5/8”, 3/4”, or 7/8” O.D. Rods. UL Listed. C92658LC C92634LC C92678LC Lead Covered Connector for 5/8” O.D. Lead Covered Connector for 3/4" O.D. Lead Covered Connector for 7/8” O.D. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 23 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT BONDING LUGS BONDING LUG Bonding lug (eye connector) for use with Class II or 4/0 cables. UL Listed C927 C927LC C927LG C927LCLG Brass for use with Class II cable Lead Covered Brass for use with Class II cable Brass for use with 4/0 cable Lead Covered Brass for use with 4/0 cable 8” SQUARE INCH BONDING PLATE WITH WELDING PLATE 1/4” X 5” X 5” Steel plate is welded to stack to provide area for grounding. Provided with heavy duty brass cap for attaching Class II or 4/0 cables. C928LC Steel Plate with heavy duty brass cap Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 24 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT 2-BOLT CAP FASTENER FOR AIR TERMINAL OR CABLE Use to secure Air Terminal or conductors and provided with 1/2” threaded stud either 7/8” or 1-1/2” long. Use catalog number P940 (lead anchor) for mounting (not provided). UL Listed. C93212 C93234LC C93278LC Use with bare C901 or C902 Cables Use with C901LC lead covered cable and lead covered 5/8” Air Terminal Use with lead covered C902LC cable and 3/4” lead covered Air Terminal 934–PINCH TYPE CABLE FASTENER For use with Class II or 4/0 cables. Provided with 1/2” threaded stud for anchoring. Available with 7/8” threaded stud. Use catalog number P940 (Lead Anchor) for mounting (not provided). UL Listed C934 C934 – LC Bare Brass Lead Covered Brass Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 25 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT FASTENERS 940–1/2” Expansion Shield 1/2” expansion shield with 1/2-13 internal thread. For use with 7/8” stud length products. UL Listed P940 Expansion Shield 2 HOLE ANCHOR STRAP Copper or stainless steel 2 hole anchor strap. Sized to fit the O.D. of air terminals or cable. Will accommodate either bare or lead covered materials. Stainless steel can be used on top 25’ of stack. C960 C961 C962 C963 C964 C965 C966 Copper strap for 1/2" O.D. Copper strap for 9/16” O.D. Copper strap for 5/8” O.D. Copper strap for 11/16” O.D. Copper strap for 3/4" O.D. Copper strap for 13/16” O.D. Copper strap for 7/8” O.D Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 S960 S961 S962 S963 S964 S965 S966 Pa ge 1 26 Stainless steel strap for 1/2" O.D. Stainless steel strap for 9/16” O.D Stainless steel strap for 5/8” O.D. Stainless steel strap for 11/16” O.D. Stainless steel strap for 3/4” O.D. Stainless steel strap for 13/16” O.D. Stainless steel strap for 7/8” O.D. 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com INDUSTRIAL STACK EQUIPMENT U-BOLT CABLE OR AIR TERMINAL TO PIPE SUPPORTS Used to secure air terminals or full size cables to pipes. Made of 1/8 aluminum, copper, or stainless steel for heavy duty applications. For ordering please specify the 2 hole anchor strap size needed (please refer to catalog no. 960-966) followed by the U-bolt size needed (see below). UL Listed. 1U= O.D. range 0.400”-1.315” 2U= O.D. range 1.315”-2.000” 3U= O.D. range 1.900”-3.000” 4U= O.D. range 2.75”-4.500” 6U= O.D. range 4.500”-6.750” 8U= O.D. range 6.000”-8.625” Material Code A-Aluminum C-Copper S-Stainless Steel Anchor Strap Size 960-966 See page 125 Pipe Size Range U-Bolt see above Example: S962-3U Stainless Steel strap with 5/8” O.D. support for a 3” O.D. range pipe Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 27 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com SURGE PROTECTION P775 RESIDENTIAL SURGE ARRESTER Secondary surge arrester designed to protect against lightning surge damage. 120/240 VAC. Diagnostic LED light. For use in residential or light commercial installations. UL Listed but not rated for UL96A Installations P775 Residential Surge Arrester COMMERCIAL SURGE ARRESTORS Preferred Lightning Protection offers a complete line of UL 1449 3rd Edition surge protection devices (SPD). We have SPD’s for residential, light commercial, or industrial. We also have voice/dial signal protection devices and surge strips/UPS/Well Blocks available. Please call to discuss your specific needs. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 28 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com COMPRESSION CONNECTORS YGL-C An irreversible compression ground grid cross connector. Use on 6 connectors and 4 dies to install all combinations from #6 solid to 500 kcmil. Catalog Number Cable to Cable Element “A” Cable to Ground Element “B” YGL2C2 #6 Sol.--#2 Str. (.292) YGL29C2 #1 Str.–250 kcmil. (.575) YGL29C29 #2 Str. (.292)–250 kcmil (.575) #2 Str. (.292)–250 kcmil (.575) 250 kcmil (.575)–500 kcmil (.813) #6 Sol.--#2 Str. (.292) #2 Str. (.292)–250 kcmil (.575) YGL34C2 YGL34C29 Element “A” Element “B” 1/2”-5/8” Rod #6 Sol.--#2 Str. (.292) #6 Sol. (.162)--#2 Str. (.292) 5/8”-3/4” Rod #2 Str. (.292)–250 kcmil (.575) #6 Sol.--#2 Str. (.292) #2 Str. (.292)–250 kcmil (.575) To Rebar Element “A” 3/8”-1/2” #3-4 Rebar 5/8”-3/4” #5-6 Rebar PREFERRED LIGHTNING PROTECTION CABLE CROSS #6 Sol. (.162) -- #2 Str. (.292) #1 Str. (.332) – 250 kcmil (.575) #2 Str. (.292) – 250 kcmil (.575) Catalog Number YGL2C2 YGL29C2 YGL29C29 YGL34C2* YGL34C29* Installation Tools, Die Set Catalog Number (Number of Crimps) Y750/Y35/Y39 PAT750-18V Y45 HYPRESS™ Y46 HYPRESS™ HYPRESS™ Element Element Element Element Element Element Element “A” Element “B” “A” “B” “A” “B” “A” “B” U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U997 (1) U-0 (1) U997 (1) U-0 (1) U997 (1) U-0 (1) ③U997P (1) U997 (1) U997 (1) U997 (1) U997 (1) U997 (1) U997 (1) ③U997P (1) ③U997P (1) S998 or P998 or PU998 (1) U-0 (1) PU998 (1) U-0 (1) U-0 (1) U-0 (1) PU998 (1) PU998 (1) S998 or P998 or U997 (1) U997 (1) PU998 (1) U997 (1) PU998 (1) ③U997P (1) PU998 (1) PU998 (1) 1. Where a “U” or “PU” die is recommended with Y45 HYPRESS™, a PT6515 adapter must be used. 2. Where a “U” or “PU” die is recommended with the Y46 HYPRESS™, a PUADP-1 adapter must be used. ③ Polarized die for the PAT750-18V Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 C61, C61T, C62, C62T, C63, C63T, C64, C64T, C65, C65T C50, C50T, C51, C52, C52T, C53, C54, C54T, C54-19, C55, C55T, C56, C56T, C56-19, C5619T, C58-19, C58-19T, C59-19, C59-19T, C5937, C59-37T *These connectors can only be installed using the Y750, Y45, or Y46 HYPRESS™ with the recommended dies. These connectors CANNOT be installed with the Y35 and Y39 HYPRESS™ Pa ge 1 29 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION CONNECTORS YGHP-C An irreversible compression ground tap figure 6. Can be used as a tap. Installation Data ⑤ Catalog Number YGHP2C2 YGHP29C2 YGHP29C26 Accommodates FIG. No. Run Tap 1 #6 Sol. (0.162)-#2 Str. (0.292) ① #6 Sol. (0.162)- 1 1 1/0 Str. (0.372)— 250 kcmil (0.575) 1/2"-5/8” Rod -#2 Str. (0.292) #4 Sol. (0.204)--#2 (0.292) 1/0 Str. (0.372)-2/0 Str. (0.419) YGHP29C29 ② 1 3/0 Str. (0.470)250 kcmil (0.575) YGHP34C2 ⑥ 1 #4 Sol. (0.204)-#2 Str. (0.292) 1 1/0 Str. (0.372)-2/0 Str. (0.419) YGHP34C26 ⑥ YGHP34C29 ⑥ 1 5/8”-3/4” Rod Run Cable to Rebar Tap -- -- ③ ④ Y750/Y35 Y39 HYPRESS™ PAT75018V Y45 HYPRESS™ Y46 HYPRESS™ No. of Crimps 0 U0 U0 U0 U0 1 997 U997 ⑦ U997P U997 U997 1 998 PU998 PU998 PU998 or S998 PU998 or P998 1 #2 Str. #3 Rebar 3/8 Thru ½ $3 Rebar 1/0 Str.-2/0 Str. 3/0 Str.-250 kcmil .75 [19] -#5 Rebar 5/8 Thru 3/4 3/0 Str. (0.470)250 kcmil (0.575) ① When using #6 SOL. In tap, fold conductor double To improve fill inYGHP2C2 ② For YGHP29C29 when using 3/0 in tap, minimum Run conductor is 2/0 STR. ③ Where a ‘U’ or ‘PO’ die is recommended with the Y45 HYPRESS™, a PT6515 adapter must be used. ④ Where a ‘U’ or ‘PU’ die is recommended with the Y45 HYPRESS™, a P-UADP-1 adapter must be used. B Die Index No. 1/0 Str.-2/0 Str. 3/0 Str.-250 kcmil ⑤ Clean rust and protective coatings from rebar before connector installation to provide a proper ground connection. Precrimping is not required. ⑥ These connectors can only be installed using the Y750, Y45 or Y46 HYPRESS™ with the recommended dies. These connectors can not be installed with the Y35 and Y39 HYPRESS™ ⑦Polarized die for the PAT750-18V PREFERRED LIGHTNING PROTECTION CABLE CROSS C61, C61T, C62, C62T, C63, C63T, C64, #6 Sol. (.162)-#2 Str. (.292) C64T, C65, C65T #4 Sol. (.204)-#2 Str. (.292.) C64, C64T, C65, C65T C50, C50T, C51, C52, C52T, C53, C54-19, 1/0 Str. (.372)-2/0 Str. (.419) C56-19, C56-19T C55, C55T, C56, C56T, C59-19, C59-19T, 3/0 Str. (.470)-250 kcmil (.575) C59-37, C59-37T C52, C52T, C53, C54, C54T, C54T, C55, C55T, C56, C56T, C56-19, C56-19T, C581/0 Str. (.372)-250 kcmil (.575) 19, C58-19T, C59-19, C59-19T, C59-37, C59-37T Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 30 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION CONNECTORS YGHC-C An irreversible ground tap figure “C” connector. Used for all cables from #6 solid to 500 kcmil. Commercial Copper Cable Range/Ground Rod to Copper Cable Run Stranded Copper Cable Range Installation Data Tap Run Tap Catalog Data YGHC2C2 YGHC26C2 YGHC26C26 YGHC29C26 YGHC29C29 A B Die Index No. ① ② Y750/Y35/PAT750 /Y39 HYPRESS™ Y45 HYPRESS™ Y46 HYPRESS™ No. of Crimps #6 Sol. (0.162) #2 (0.292) 1/4" Rod ⑦ #6 Sol. (0.162) #2 (0.292) 1/4" 10 mm² (4.12 mm) 35mm² (7.62 mm) 10 mm² (4.12 mm) 35mm² (7.62 mm) 1.16 [30] 0.75 [19] C U-C U-C U-C 1 1 Str. (0.328) 2/0 Str. (0.419) 3/8” Rod ⑦ #6 Sol. (0.162) #2 (0.292) 1/4" 35mm² (7.62 mm) 70mm² (10.9 mm) 35mm² (7.62 mm) 70mm² (10.9 mm) 1.41 [35] 0.75 [19] 0 U-0 U-0 U-0 1 1 Str. (0.328) 2/0 Str. (0.419) 3/8” Rod ⑦ 1 Str. (0.328) 2/0 Str. (0.419) 35mm² (7.62 mm) 70mm² (10.9 mm) 35mm² (7.62 mm) 70mm² (10.9 mm) 1.54 [39] 0.75 [19] 0 U-0 U-0 U-0 1 6 Sol. (0.419) 2/0 Str. (0.419 95 mm² (12.5 mm) 120 mm² (14.4 mm) 35mm² (7.62 mm) 70mm² (10.9 mm) 1.97 [50] 0.75 [19] 997 997 U997 U997 1 3/0 Str. 0.470) 250 kcmil 95 mm² (12.5 mm) 120 mm² (14.4 mm) 95 mm² (12.5 mm) 120 mm² (14.4 mm) 2.06 [52] 0.88 [22] 997 997 U997 U997 1 #6 Sol. (0.162) 2/0 Str. (0.419) 150 mm² (16 mm) 240 mm² (20.35 mm) 35mm² (7.62 mm) 70mm² (10.9 mm) 2.42 [62] 0.88 [22] 1011 U1011 S1011 P1011 2 3/0 Str. 0.470) 250 kcmil 1/2” or 5/8” Rod ⑦ 3/0 Str. 0.470) 250 kcmil 1/2" or 5/8” Rod ⑦ -- YGHC34C26 ⑥ ①Where a “U” or “PU” die is recommended with The Y45 HYPRESS™, PT6515 adapter must be used. ②Where a “U” or “PU” die is recommended with The Y46 HYPRESS™, a PUADP-1 adapter must be used. 3. Listed under UL486A for copper wire connectors 4. Dimensions in brackets [ ] are in millimeters. 5. In referencing connectors without PENETROX™ oxide Inhibitor add suffix “NP” to the end of the catalog number. ⑥ These connectors can only be installed using the Y750, Y45 or Y46 HYPRESS™ with the recommended dies. These connectors cannot be installed with the Y35 and Y39 HYPRESS™ ⑦ Ground rod to copper cable is UL 467 Listed for direct burial in earth and concrete. PREFERRED LIGHTNING PROTECTION CABLE CROSS C61, C61T, C62, C62T, C63, C63T, C64, #6 Sol. (.162)-#2 Str. (.292) C64T, C65, C65T #8 Sol. (.128)-6 Str. (.184) C63, C63T #4 Sol. (.204)-#2 Str. (.292.) C64, C64T, C65, C65T C50, C50T, C51, C52, C52T, C53, C54-19, 1/0 Str. (.372)-2/0 Str. (.419) C56-19, C56-19T C55, C55T, C56, C56T, C59-19, C59-19T, 3/0 Str. (.470)-250 kcmil (.575) C59-37, C59-37T C52, C52T, C53, C54, C54T, C54T, C55, C55T, C56, C56T, C56-19, C56-19T, C581/0 Str. (.372)-250 kcmil (.575) 19, C58-19T, C59-19, C59-19T, C59-37, C59-37T Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 31 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS UDIEKITCU, UDIEKITAL, UDIEKITHYGRD BURNDY® U Die Kits Each UDIEKITCU and UDIEKITAL die kit includes 15 sets of “U” dies and the PT29291 die case. These stainless steel color coded dies are for crimping BURNDY® YA, YS, YA-A and YS-A type HYLUG™ color coded terminals and 1 splices ranging from #6 AWG through 750 kcmil. UDIEKITHYGRD Catalog Number UC UO U997 Pu998 U1011 U1104 U1105 U2CABT (Ground rod pre-crimp die) PT29291 (Die Case) The UDIEKITHYGRD kit includes eight die sets. Seven die sets are used to install BURNDY® HYGROUND™ irreversible compression grounding connectors, and the U2CABT die set for pre-crimping 1/2”, 5/8” and 3/4” ground rods for increased rotational resistance. BURNDY® “U” dies are used in the Y35, T39, Y750 series, PAT750-18V series, Y46, and PAT46-18V (with PUADP-1 adapter) tools. UDIEKITCU Includes UDIEKITAL Includes Copper Wire Size Catalog Number Aluminum Wire Size Catalog Number #6 AWG #4 AWG #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 600 kcmil 750 kcmil Die Case U5CRT U4CRT U2CRT U1CRT-1 U25RT U26RT U27RT U28RT U29RT U30RT U31RT U32RT U34RT U36RT U39RT PT29291 #6 AWG #4 AWG #2 AWG #1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 600 kcmil 750 kcmil Die Case U6CABT U4CABT U2CABT U1CART U25ART U26ART U27ART U28ART U29ART U30ART U31ART U32ART U34ART U36ART U39ART-2 PT29291 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 32 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS PATRIOT® HIGH PERFORMANCE PAT750LI SPECIFICATIONS Output Force: 12 tons (10.9 metric tons) Tool Weight: 15.7 lbs. (7.12 kg) With Battery Length: 15.75” (40 cm) Width: 3.5” (8.89 cm) Height: 13.5” (34.29 cm) Operating Voltage: 18 V-DC Recharge Time: 30 minutes 18 Volt Lithium-Ion Battery Actuated Tool Hydraulic Self-Contained 12Ton Crimping Tool The BURNDY® PATRIOT® PAT750-Lithium-Ion tool is approximately 25% faster than the previous models. In addition to faster crimp cycles, the High Performance PAT750-LI has newly designed electronics that are field proven for ultimate reliability and proven to handle the harshest work environments. The PAT750-LI incorporates the latest engineering technology with a refined hydraulic system for ultra performance, speed and reliability. The redesigned field proven electronics provides the reliability in the harshest work environments. All BURNDY® battery actuated hydraulic tools provide a consistent, reliable connection every time. The PAT750-LI features the BURNDY® Y750 tool head, capable of using all “U” style dies, and incorporates a bearing and alignment guide for use on HYGROUND® and other asymmetrical connectors. The crimp head rotates 355°for operation in virtually any position. FOR USE ON Features and Benefits Refined hydraulic system for ultra performance, speed and reliability. Field proven electronics for ultimate reliability in the harshest environments. Overmolded handle for comfort and improved grip; allows for onehanded operation for advance, retract, and hold. Copper Aluminum ACSR #9 sol.-500kcmil #8sol.-587.2kcmil #4-556.5kcmil Copper Aluminum #14 sol.-500kcmil #8-500kcmil Taps Aerial Cable Copper #6-500kcmil 18 volt Lithium-Ion batteries Terminals & Splicers provide 2.5 times more charge/discharge cycles than traditional Ni-provide 430% more lifetime work. HYGROUND® 30-minute charger controls current, voltage & temperature to maximize battery life. Forced air cooling fan cools the battery by forcing cool air through the battery’s built-in air vents. State of the art crimping head design, 355° head rotation lets user get into tight areas easier. Allows use of standard BURNDY® dies already in use. Ergonomically balanced tool design eases operation. Each PATRIOT® tool uses standard BURNDY® dies and offthe-shelf connectors available world-wide. Supplied with a durable high impact formed carrying case to hold the tool, battery charger, two 18 volt Lithium-Ion batteries, tool retention lanyard, and die compartment to hold “U” die sets. (Dies sold separately). Provided with a 5-year limited warranty. All PATRIOT® tools feature the BURNDY® INFINITY DRIVE® transmission which has a lifetime warranty. Tension Sleeves Aluminum Copper ACSR Copper #8-500kcmil (cable/ground rod) Ground Rods 1/2"-1” Diameter ACCESSORIES Battery: Cat# BAT18VLI (3.0 AH) Hi-capacity Chargers: 120V-AC Cat#PATCHGR-LI 12/24V-DC Cat#PATCHGR-LIDC 240/250V-AC Cat#PATCHGR-L125OV Lanyard: Durable high impact formed #8-750kcmil #8-750kcmil #4-556kcmil Cat#PAT208620 carrying case provides superior protection and stores all accessories. PAT750C-LI with rubber covered head is available. 5-year limited warranty on tool. Lifetime warranty on INFINITY DRIVE®. 1-year warranty on batteries and charger. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 33 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS SPECIFICATIONS PATRIOT® HIGH PERFORMANCE PAT750XT-18V Output Force: 12 tons (10.9 metric tons) Tool Weight: 16.5 lbs (7.5kg) With Battery Length: 15.75” (40 cm) Width: 3.5” (8.89 cm) Height: 13.5” (34.29 cm) Operating Voltage: 18 V-DC Recharge Time: <45 minutes Battery Actuated Tool Hydraulic Self-Contained 12Ton Crimping Tool The BURNDY® PATRIOT® High Performance PAT750XT-18V tool is 25% faster than previous models. In addition to faster crimp cycles, the High Performance PAT750XT-18V has newly designed electronics that are field proven for ultimate reliability and proven to handle the harshest work environments. The High Performance PAT750XT18V incorporates the latest engineering technology with a refined hydraulic system for ultra performance, speed and reliability. All PATRIOT® tools feature the BURNDY INFINITY DRIVE® transmission which has a lifetime warranty. The High Performance PAT750XT18V features the BURNDY® Y750 tool head, capable of using all “U” style dies, and incorporates a bearing and alignment guide for use on HYGROUND® and other asymmetrical connectors. Features reliable head rotation design for operation in virtually any position. All PATRIOT® battery actuated hydraulic tools provide a consistent, reliable connection every time. Each PATRIOT® tool uses standard BURNDY® dies and offthe-shelf connectors available world-wide. Supplied with a durable high impact formed carrying case to hold the tool, battery charger, two batteries, tool retention lanyard, and die compartment to hold “U” die sets. (Dies sold separately.) Provided with a 5-year limited warranty. FOR USE ON Tension Sleeves Features and Benefits Refined hydraulic system for ultra performance, speed and reliability. Field proven electronics for ultimate reliability in the harshest environments. True, one-handed operation for advance, retract, and hold 12 tons of output force for use on virtually all compression applications. State of the art crimping head design, 360° head rotation lest user get into tight areas easier. Allows use of standard BURNDY® dies already in use. Ergonomically balanced tool design eases operation and helps lessen fatigue. Durable high impact formed carrying case provides superior protection and stores all accessories. PAT750CXT-18V-rubber covered head is available. 118 volt Ni-MH battery eliminates voltage depression (memory issues). 5-year limited warranty on tool. Lifetime warranty on INFINITY Copper Aluminum ACSR #8 sol.-500kcmil #8sol.-587.2kcmil #4-556.5kcmil Copper Aluminum #14 sol.-500kcmil #8-500kcmil Taps Aerial Cable Copper #6-500kcmil Terminals & Splicers Aluminum Copper ACSR #8-750kcmil #8-750kcmil #4-556kcmil HYGROUND® Copper #8-500kcmil (cable/ground rod) Ground Rods 1/2"-1” Diameter ACCESSORIES Battery: Cat# BAT18V Hi-capacity (2.6 AH) Chargers: 120V-AC Cat#PATCHGR18V 12/24V-DC Cat#BCT/PATDCCHGR 240/250V-AC Cat#PATCHGR250V Lanyard: Cat#PAT208620 DRIVE® 1-year warranty on batteries and charger. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 34 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS SPECIFICATIONS Y750HSXT AND Y750CHSXT RUBBER COVRED HEAD Force developed:12 tons Weight: 14.5lbs. (6.6kg) Length: 23.96” (608 mm) Height: 2.86” (78 mm) Width: 8.71” (222 mm) Jaw opening: 1.65” (42 mm) 750 REVOLVER HYPRESS™ Hydraulic Hand Operated Tool 12Ton Crimp Force FOR USE ON Conductor Range: #14 – 750 kcmil Cu/Al #4 – 556.5 kcmil ACSR The BURNDY® Y750HSXT Series HYPRESS™ is a wide mouth (1.65”) hand operated hydraulic 12 ton crimping tool for use on virtually all compression applications. The C-shaped head rotates 355° relative to the handle and is mated to a patented rapid advance pump. The Y750HSXT provides easy tapping, splicing, and terminating of overhead lines, the full line of HYGROUND® compression grounding connectors, NEC cable connections, and N30 – N650 Navy cable connections. The Y750HSXT accepts all BURNDY® “U” dies for use on conductor ranges of #14 – 750 kcmil AL/CU and #4 – 556.5 kcmil ACSR conductors. The Y750HSXT HYPRESS™ has a rubber-covered head and handles for tool impact protection. Each Y750HSXT uses standard BURNDY® dies and off-the-shelf connectors available world-wide. Supplied with a durable high impact formed carrying case to hold the tool, and die compartment to hold “U” die sets. (Die sold separately.) All BURNDY® Y750HSXT series tools are provided with a 5-year limited warranty. Tension Sleeves #8 sol.-500kcmil #8sol.-587.2kcmil #4-556.5kcmil Copper Aluminum #14 sol.-500kcmil #8-500kcmil Taps Aerial Cable BENEFITS applications with a lightweight, selfcontained system and provides easy tool removal from continuous conductors with its C-shaped head. Easy tool positioning with 355° head rotation. Patented rapid advance pump for faster crimps. Exposed positive die lock buttons for easy die change out and die retention. Handle trigger drain for convenient ram retraction. Quality assurance is provided with an audible “Pop-Off” pressure relief valve. Comfort grip handles help ease operator fatigue with continuous use. Long life expectancy from the company that provided the industry with the first self-contained hydraulic tool in 1934. Rubber covered head and handles on Y750HSXT for tool impact protection. Supplied with high impact plastic carrying case. 5-year limited warranty. Pa ge 1 35 Copper #6-500kcmil Aluminum Copper ACSR #8-750kcmil #8-750kcmil #4-556kcmil Terminals & Splicers Covers a wide range of Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Copper Aluminum ACSR HYGROUND® Copper #8-500kcmil (cable/ground rod) Ground Rods 1/2"-1” Diameter ACCESSORIES: Cat. No. Description Y750HSCASE Plastic Carrying Case for Y750HSXT or Y750CHSXT PT29279-2 Force test gauge for accurate visual reading of output force PT29291 Die Case Steel case for storage and protection of “U” dies. WIREMIKE Provides quick and easy identification of commonly used conductors. 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS SPECIFICATIONS Y35 AND Y35-2 Y35 Force developed Operating pressure Weight (less case) Overall length Head width HYPRESS™ Hand Operated Hydraulic Tool The Y35 HYPRESS™ Tool incorporates a C-shaped, rotatable head for overhead line work and compression grounding applications. The hook style head with extensive ram travel provides for easy tapping and splicing of overhead lines as well as HYGROUND® compression grounding systems. The Y35-2 HYPRESS™ head, body, and handles are covered with 3/16” robber for tool impact protection. Order the hot-line handle assembly, “U” dies and accessories separately. 5-year limited warranty. Molded coverings 12 tons 10,000 psi 13lbs. 13-1/2 lbs. 23-1/4” 24” 4-3/4” 6" Head, Body & Handles Body & Handles FOR USE ON BENEFITS Compact “C” shaped head allows easy placement and removal from continuous conductor lengths. Easy to position tool for work with 180° head rotation. Versatile and economical-tool works with all commonly used copper, aluminum, and ACSR conductors from #6 str. To #556.5 26/7 stranding. Body and handles covered with 3/16” molded rubber for tool impact protection. Easy die change accomplished with push button die locks. Quality assurance is provided with automatic 10,000 PSI blow-off pressure release valve for positive crimping. Rapid ram advance reduces installation time by eliminating need to pump handles to advance ram to connector. Saves installation time with trigger controlled return release which returns ram to its preset starting point. Long continuous usage is aided with comfort grip handles. Provides UL Listed and CSA Certified connections when installed in conjunction with listed BURNDY® HYLUG™ terminals and HYLINK™ splices. 5-year limited warranty. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Y35-2 Pa ge 1 36 COPPER #8 str.-500kcmil Terminals-grounding YGH, YGHA, YGF Code Cables Splices-grounding YGS, YGHS COPPER #8 str.-kcmil and up to 3/4" ground rod Taps-grounding YGHC-C, YGHP-C YGHR-C COPPER #8 str.-750 kcmil Terminals Uninsulated YA, YA-2N, YA-L, YA-LB Code Cables YA-2LN N30-N500 Terminals insulated Navy Cables YAEV-L Box, YAEV-L Flexible & Extra Flex YAEV-H, YAEV-RS, YAEV-RH Splices to Size 400 kcmil YS, YS-T, YS-L YS-LB, YSV-L Box YSV-L, YSM ALUMINUM #8 str.-750 kcmil Terminals YA-A Code Cables AYP, AYPO Splices to Size 350 kcmil YSA, YRB, YS-AT See Burndy Overhead Transmission and ACSR Distribution Catalog Module 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS Y39 SPECIFICATIONS Force developed: 12 tons Operating force: 10,000 PSI Weight-less case: 12 lbs. Length: 23” Max. head width: 3-1/8” Die accommodations: U-dies HYPRESS™ Hand-Operated Hydraulic Tool The versatile, lightweight Y39 weights, 13lbs., and its small 3-1/8” wide head rotates 180° for convenience and flexibility. The tool provides 12 tons of crimping power, while its built-in overload value automatically releases pressure when the crimp is completed. FOR USE ON The Y39 is designed for easy die insertion and removal without ball checks or set screws. Its rapid ram advance and trigger-controlled release eliminate unnecessary pumping after every crimp. 5-year limited warranty. BENEFITS Easy to work in small tight spaces with only a 3-1/8” wide compression head and short handle throw. Easy to position tool for work with 180° head rotation. Versatile and economical-tool works on all commonly used copper and aluminum conductors from #6 str. To 750 kcmil. Body and handles covered with 3/16” rubber. Easy to locate and hold dies in position with the positive push button die locks plus die changing is accomplished easily without ball checks or set screws. Easy to remove or lock into position die holder with recessed spring latch plus leather strap to prevent loss. BENEFITS (continued) Quality assurance is provided with automatic 10,000 psi “blow off” pressure release valve for positive crimping. Rapid ram advance eliminates requirements for pumping handles to advance ram to connector. Trigger release allows ram to return to preset position. Long continuous usage is aided with comfort grip handles. Provides UL Listed and CSA Certified connections when used in conjunction with listed BURNDY® HYLUG™ and HYLINK™ splices. 5-year limited warranty. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 37 Copper #6 AWG-750 kcmil str. Code Cable N30-N650 Navy Cable Flexible and Extra Flexible Terminals-Uninsulated YA, YA-L, YA-LB, YGH, YGHA Splices & Tees-Uninsulated YS, YS-L, YS-LB, YS-T, YSP-T, YST Copper AN or AIR #6-#4/0 str. Code Cable AN6-AN #4/0 Aircraft Cable Flexible and Extra Flexible Terminals-Uninsulated YAV-L Box, YAV-l, TAV-Rs Box, YAV-RS Splices-Uninsulated YSV-L Box, YSV-L Copper Insulated Terminals #8 AQG-#2/0 str. Code Cable AN8-AN #2/0 Aircraft Cable Flexible and Extra Flexible Terminals-Insulated YAEV-L Box, YAEV-L, YAEV-RS Box, YAEV-RS, YAEV-RH Copper Taps #12 AWG Solid-250 kcmil Taps: YC-C, YGHC-C, YGHP-C, YGHR-C Aluminum #8 AWG-750 kcmil str. Code Cable Terminals: YA-A Splices: YS-A, YS-AT, YRB Aluminum #6 str.-500 kcmil TAPS: YFD, YFN, YFO 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS Y46 AND Y46C SPECIFICATIONS Y46 Force developed Operating pressure Jaw openings Max. Width Weight (less case) Overall length Molded coverings HYPRESS™ 15 Ton Force Remote Operated Hydraulic Tool-10,000 PSI The Y46 standard tool and Y46C rubber covered tools are lightweight, compact and versatile with installation dies for both circumferential and nest-identor types. Accessories include “U-“ die adapter, a cable cutting die for 1.2” diameter non-steel conductors, plus a lifting eye and universal hot-stick adapter for overhead line construction. 5-year limited warranty. 15 tons 10,000 psi 2” 4-1/2” 4-3/4” 16lbs. 17-1/2 lbs. 15” 21-3/4” (incl. boot) No Yes FOR USE ON Connector Type BENEFITS Compact “C” shaped head allows easy placement and removal from continuous conductor lengths. Versatile and economicalHYPRESS™ tools work on all commonly used copper and aluminum products. Dies and adapters lock into or remove from tool head easily with the positive push button die locks. Safety, strength and high quality is provided with strong forged steel and precision machined components. Excellent for HYGROUND® compression grounding application through 1” ground rods and up to 500 kcmil taps, terminals and splices. Provides UL Listed and CSA Certified connections when used in conjunction with listed BURNDY® HYLUG™ and HYLINK™ splices. Y46C has a permanently molded head of 3/16” rubber and includes separate molded rubber boot to cover the lower HYPRESS™ body and hydraulic coupler for impact protection. Copper #8 AWG str.1500 kcmil Code Cable Navy Cables Flexible and Extra Flexible 1/2"-1” Ground Rods Aluminum #8 AWG1250 kcmil Code Cables ACSR Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 38 Conductor Range Terminals-Grounding to 500 kcmil YGA, YGHA, YGHA, YGF Terminals-Uninsulated #8 to 1500 kcmil YA, TA-2N, TA-L, TA-LB, TA-TC, TA-2LN, TAB-4N, YAV-L Box, YAV-L, YAVRS Box, YAV-RS, YA-TCFX Terminals-Insulated #8 to 2/0 YAEV-L Box, YAEV-L, YAEV-H, YAEV-RS, YAEV-RH Splices #8 to 1500 kcmil YS, YS-T, YS-L, YS-LB, YST, YSP-T, YGS, YGHS Taps YH, YCHC #14 to 1000 kcmil YC-C to 4/0 AWG Taps-Grounding to 500 kcmil YGHC-C, YGHP-C, YGHR-C Terminals YA-A, AYP, AYPO Splices YS-A, YS-AT, YRB Taps YFD, YFN, YFO, YFR See Burndy Overhead Transmission and Distribution Catalog Module ACCESSORIES: Cat. No. P15K PUADP-1 PT10128 Y46-2 Y46C Cutter die max. 1.2” dia. “U”-die adapter Universal hot stick adapter-U46 Same as Y46 with Female Coupler 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS Y45 SPECIFICATIONS Force developed: 15 tons Operating force: 10,000 PSI Weight (less case): 15-3/4 lbs. Max. Width: 7-1/4” Max. Height: 14-1/4” HYPRESS™ 15-Ton Remote Power Operated Hydraulic Tool10,000 PSI The Y45 Series is designed for remote hydraulic operation. A Cshaped head design provides easy installation of tap and splice connectors. The hook style head with extensive ram travel operates easily on large distribution and transmission conductors. Together with accessories, the Y45 Series tooling may be used on overhead lines. The small light-weight head design is very adaptable for work in underground trenches and manholes. Uses standard BURNDY® “S” Dies. Cat. No. PT6515 is required to use “U-“type dies in all Y45 variations. Order Head, Hose, Pump, Dies, and accessories separately. 5-year limited warranty. FOR USE ON Tension Sleeves Copper Aluminum ACSR #8 sol.-500kcmil #8sol.-954kcmil #4-795 (26/7) Taps Aluminum ACSR #14-954 (18/1) ACSR #6-795 (54/7) Copper Aluminum #6 str.-1500kcmil #4 str.-1000kcmil Aerial Cable Connections BENEFITS Easy connector installation and tool removal from line conductors with the open C-shaped head. Easily lifted into working position using lifting eye. Easy die changing plus secure die alignment is provided with the positive die lock buttons. Long life expectancy is provided with fully protected ram and die buttons. Rapid assembly and disassembly is provided with quick disconnect hydraulic coupler. Rugged design provides long life expectancy. 5-year limited warranty Code Cable Terminals & Splicers Aluminum #8-1500kcmil Copper #8-1000kcmil Taps Copper #14-1000kcmil Aluminum #14-900kcmil HYGROUND® Copper #6-500kcmil (cable/ground rod) Ground Rods 1/2"-1” Diameter ACCESSORIES: Cat. No. PT6515 Description: Adapter for use with “U-“die sets. Cat. No PT6545 Description: Die carrying case for “S” and “P” type dies. Holds eight (8) die sets. (Dies sold separately.) Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 39 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS Y750BHXT AND Y750CBHXT RUBBER COVERED HEAD SPECIFICATIONS Operating Pressure: 10,000 PSI Force developed: 12 tons Jaw opening: 1.65” (42mm) Weight: 10.3lbs.(4.7kg) Length: 12.8” (325mm) Head width: 5.2” (132mm) HYPRESS™ 12-Ton Remote Power Operated Hydraulic Tool FOR USE ON Conductor Range: #14 – 750 kcmil Al/Cu #4 – 556.5 kcmil ACSR Tension Sleeves 12 ton remote power operated hydraulic tool. The Y750BHXT HYPRESS™ incorporates a wide mouth (1.65”) C-shaped head for all compression applications. The hook style head provides for easy tapping, splicing, and terminating of overhead lines as well as the full range of HYGROUND® compression grounding system BENEFITS connectors, NEC cable connections Covers a wide range of applications and N30 – N650 Navy cable and provides easy tool removal from applications. continuous conductors with its CAll standard BURNDY® “U” dies fit shaped head (1.65” opening). Easy die change out and retention the Y750BHXT and Y750CBHXT with exposed positive die lock HYPRESS™. Dies and accessories buttons. sold separately. Uses all standard BURNDY® Udies. The Y750BHXT has a permanently Y750CBHXT provides molded molded rubber covered head and includes a separate rubber molded rubber covering on head, body and boot that covers the lower body and hose fittings. Hot stick adapter sold separately. hydraulic fitting for tool impact Infinity rotatable head, so hydraulic protection. 5-year limited warranty. couplers won’t easily loosen. 5-year limited warranty. Taps Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 40 Copper Aluminum ACSR #8 sol.-500kcmil #6sol.-556.5kcmil #4-556.5 kcmil Copper Aluminum #14 solid-500kcmil #6-500 kcmil Aerial Cable Copper #6.-500kcmil Terminals & Splicers Aluminum #8-750 kcmil Copper #8-750 kcmil ACSR #4-556 kcmil HYGROUND® Copper #6-500kcmil (cable/ground rod) Ground Rods 1/2"-1” Diameter ACCESSORIES: Cat. No. Description PT29402-1 Adjustable head grip for joining head to universal hot sticks. PT29279-2 Force test gauge for accurate visual reading of output force PT29291 Die Case Steel case for storage and protection of “U” dies. WIREMIKE Provides quick and easy identification of commonly used conductors. 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com COMPRESSION TOOLS Y35BH HYPRESS™ 10,000 PSI SPECIFICATION Y35BH Force developed Operating pressure Jaw openings Max. Width Weight (less case) Maximum Height Molded coverings Remote Power Operated Compression Tools The Y35BH series remote head is designed for remote power operation and incorporates the same C-shaped head as the Y35. The hook style head with extensive ram travel provides for easy tapping and splicing of overhead lines as well as HYGROUND® compression grounding systems. Uses all standard BURNDY® “U” dies. The remote power operated Y35 heads are available covered with 3/16” molded rubber for tool impact protection. Order head, hose, pump, dies and accessories separately. Five-year limited warranty. 12 tons 10,000 psi .95” 4-3/4” 6” 8 lbs. 9 lbs. 9-1/4” 10-1/2” -- Yes FOR USE ON BENEFITS Easy tool removal from line conductor after compression taps are installed with the open “C” shaped head. Easily lifted into working position using the lifting eye. Easy die changing plus secure die alignments provided with the positive die lock buttons. Uses all standard BURNDY® “U” dies. Long life expectancy is provided with heavy duty reinforced back. Mates with all universal type Hot stick tooling. Rapid assembly and disassembly is provided with the quick disconnect hydraulic fitting. Type Y35BH-4 head is covered with 3/16” molded rubber. 5-year limited warranty. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Y35BH-4 Pa ge 1 41 Tension Sleeves Copper #8 sol.-500kcmil Aluminum #6sol.-636kcmil ACSR #4-556.5 (26/7) Taps #14-556.5ACSR (18.1) Aerial Cable Copper #6 str.-500kcmil Aluminum #4 str.-600kcmil Code Conductors Aluminum #8-750 kcmil Term (400 kcmil splices) Copper #8-750 kcmil Term (400 kcmil splices) HYGROUND® Copper #6-500kcmil (cable/cable) Copper #6-250kcmil (cable/ground rod) Ground Rods 1/2"-3/4” Y35BH Variations: Y35BH Head Only. Y35H Includes the Y35BH HYPRESS™ head, PT29402-1 universal hot stick adapter, and steel carrying case Y35B Includes the Y35BH HYPRESS™ head; PT91 steel reinforced hydraulic hose and an FP10 foot pump in a steel carrying case. Note: NOT for use on energized conductors. Y35BH-4 Permanent Molded Rubber Head. The Y35BH-4 is covered with 3/16” molded robber for tool impact protection (not insulated). 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS A full line of exothermic weld molds are available. Please call to inquire. THERMOWELD ACCESSORIES AND MOLD INDEX THERMOWELD TYPE for lightning protection components PAGE NUMBER Thermoweld Accessories………………………………118-124 CC-1 .............................................................................125 CC-2 .............................................................................126 CC-4 .............................................................................127 CR-1 ..................................................................... 128-129 CR-2 ..................................................................... 129-130 CR-3 ..................................................................... 131-133 CS-1..............................................................................133 CS-2..............................................................................134 CS-3..............................................................................134 CS-4..............................................................................135 CS-6..............................................................................136 CS-7..............................................................................135 CS-8..............................................................................133 CS-27.............................................................................136 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 42 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC ACCESSORIES CABLE CLEANING BRUSH Used for cleaning heavy oxidized cables. Consists of v-shaped brushes to use on a wide range of cable sizes. Wire brushes rotate and are replaceable-not for use on graphite molds. TW38-0135-00 TW38-0135-01 Cable cleaning brush Replacement brush CARD CLOTH BRUSH Used for cleaning large conductor or bus bars. It has short stiff bristles and is not for use on graphite molds. TW38-0306-00 Card cloth brush MOLD CLEANING BRUSH Used for cleaning the graphite molds without causing damage. TW38-3922-00 Mold cleaning brush Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 43 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES CABLE CLAMP Aligns and holds a wide range of cables in the mold during the welding process. Helps to prevent movement of cables. TW38-0330-00 Cable Clamp CURVED RASP Used to remove rust and mill scale from steel and cast iron surface. Not designed for use on galvanized surfaces. Rasp blade is replaceable. TW38-0101-00 TW38-0101-01 Curved Rasp Replacement blade for Rasp FLINT GUN Used to ignite the starting powder for the welding process. Replacement flints are available. TW38-0309-00 TW38-0309-01 Flint Gun Replacement Flint Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 44 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES FLINT GUN EXTENSION Provides 36” of extension to the flint gun. Flint gun is included. TW38-0904-00 36” Extension EZ LITE REMOTE™ ELECTRIC INGITION SYSTEM TWEZLT-RU TWEZLT-IG TWEZLT-SK EZ Lite Remote™ Unit, ready to use with batteries installed at factory Ignitors-(10) EZ Lite Remote™ Ignitors for use with existing thermOweld® EZ Lite Remote™ Molds and weld metal on your shelf, in your truck or at the job site. Starter Kit complete with: (1) EZ Lite Remote™ Unit, ready to use with batteries installed at the factory (20) EZ Lite Remote™ Ignitors for use with existing thermOweld® EZ Lite Remote™ Molds and weld metal on your shelf, in your truck or at the job site. Note: thermOweld & EZ Lite are registered trademarks of Continental Industries. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 45 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES HANDLE CLAMPS Used on a variety of standard molds during the welding process. These two handles will fit 95% of molds. THB106 THB107 Handles for price key 4, 7, 17, 22, or 24 nominal-3 1/8” wide molds. Handles for price key 5, 6, 8, 13, or 23 nominal-4” wide molds. A variety of different handle clamps and mold supports are available. Please call with your specific needs. MOLD CLEANERS Used to clean the slug from molds that are not split through the crucible. TW40-0319-01 TW40-0319-03 For cartridge sizes #15 thru #65 For cartridge sizes #90 thru #500 Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 46 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES PACKING MATERIAL Used to prevent the molten metal from leaking out of heavily used molds. Also used around 7 strand cable-use only on the outside (exterior) of the mold. TP1 TP5 1lb. package 5lb. package TS15 TS25 TS32 TS45 TS65 TS90 TS115 TS150 TS200 TS250 TS500 Weld Shot 15 Weld Shot 25 Weld Shot 32 Weld Shot 45 Weld Shot 65 Weld Shot 90 Weld Shot 115 Weld Shot 150 Weld Shot 200 Weld Shot 250 Weld Shot 500 WELD METAL Cartridges used to make the weld connection-packaged with the starting powder at the bottom. Standard cartridge sizes are listed. Other weld metals are available for applicationspecific use, such as Copper to cast iron, Copper to rail, or cathodic protection. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 47 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES TS15EZ TS25EZ TS32EZ TS45EZ TS65EZ TS90EZ TS115EZ TS150EZ TS200EZ TS250EZ TS500EZ Weld Shot 15 Weld Shot 25 Weld Shot 32 Weld Shot 45 Weld Shot 65 Weld Shot 90 Weld Shot 115 Weld Shot 150 Weld Shot 200 Weld Shot 250 Weld Shot 500 EZ WELD METAL WITH IGNITORS Cartridges used to make the weld connection-packaged with the starting powder at the bottom and ignitors for each cartridge. Standard cartridge sizes are listed. Other weld metals are available for application-specific use, such as Copper to cast iron, Copper to rail, or cathodic protection. Please call with your specific needs. COPPER SHIM WRAP STOCK Wrap the shim stock around the cable until the diameter is equal to mold opening. Allows smaller diameter cables to fit larger cable molds. Sold in 100 piece lots. TW38-0329-00 100 pieces of Copper shim stock Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 48 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC ACCESSORIES GRAPHITE MOLDS Used to control the shape and direction of the weld metal. We have listed on the following pages, molds generally used in the Lightning Protection Industry. A full line of molds are available. Please call with your specific needs. The use of packing material (catalog number TPI) around Lightning Protection cable is recommended to minimize leakage. SINGLE SHOT MOLDS Various styles and sizes are available for single use on top of ground rod or rebar. Each shot includes ceramic mold, disc, and weld metal. Prefe rred L i gh tn in g Prote ct io n 2 100 East F irst St re et M a r yvi l l e , M O 6 4 4 6 8 Is su e D ate: J un e 201 3 Pa ge 1 49 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref erred lp .co m w ww .pref erre d lp .com EXOTHERMIC CONNECTIONS CABLE KEY Use the chart below to determine the cable code. Then select the weld connection types needed and then find the corresponding code to acquire the mold number and cartridge size. PREFERRED LIGHTNING CABLE CODE CABLE DESCRIPTION PROTECTION A #6 AWG Solid or Stranded C61, C61T, C63, C63T B #4 AWG Solid or Stranded C62, C62T, C64, C64T C LP Class I Cables and 2/0 AWG Concentric C50, C50T, C51, C52, C52T, C53, C56-19, C56-19T D LP Class I and II Cables and 3/0 AWG Concentric C54, C54T, C55, C55T, C58-19 F 2/0 AWG LP Rope Lay C56, C56T Q 4/0 AWG Concentric Cables C59-19, C59-19T, C59-37, C5937T Following are the most common molds used in the Lightning Protection Industry. THERMOWELD TYPE CC-1 CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER CABLE RUN CABLE TAP CARTRIDGE SIZE PRICE KEY A A SSC-8A M-5002 TS25 TM4 B B SSC-8B M-5006 TS25 TM4 C C SSC-8C M-5032 TS65 TM4 D D SSC-8D M-5012 TS90 TM4 F F SSC-8F M-5016 TS90 TM4 Q Q SSC-2Q M-208 TS90 TM4 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 CADWELD ® TYPE SS Pa ge 1 50 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CC-2 CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER CARTRIDGE SIZE PRICE KEY M-5050 TS45 TM4 TAC-8C8C M-5048 TS115 TM4 A TAC-8C8A M-2184 TS65 TM4 D TAC-8D8D M-5287 TS115 TM4 C TAC-8D8C M-5040 TS115 TM4 A TAC-8D8A M-5288 TS65 TM4 F TAC-8F8F M-2193 TS150 TM4 D TAC-8F8D M-5015 TS115 TM4 C TAC-8F8C M-2194 TS115 TM4 A TAC-8F8A M-5017 TS90 TM4 Q TAC-8F2Q M-5018 TS150 TM4 Q TAC-2Q2Q M-241 TM150 TM4 F TAC-2Q8F M-5033 TS150 TM4 D TAC-2Q8D M-5036 TS115 TM4 C TAC-2Q8C M-5020 TS115 TM4 A TAC-2Q2A M-5037 TS90 TM4 CABLE RUN CABLE TAP A A TAC-8A8A C C D F Q Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 CADWELD ® TYPE TA Pa ge 1 51 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CC-4 CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER CARTRIDGE SIZE PRICE KEY M-2271 TS 65 TM4 XAC-8C8C M-2274 TS 150 TM4 A XAC-8C8A M-2276 TS 90 TM4 D XAC-8D8D M-5231 TS 150 TM4 C XAC-8D8C M-2277 TS150 TM4 A XAC-8D8A M-2279 TS90 TM4 F XAC-8F8F M-5232 TS200 TM4 D XAC-8F8D M-2286 TS150 TM4 C XAC-8F8C M-2287 TS150 TM4 A XAC-8F8A M-2289 TS115 TM4 Q XAC-8F2Q M-2290 TS200 TM4 Q XAC-2Q2Q M-443 TS200 TM4 F XAC-2Q8F M-2341 TS200 TM4 D XAC-2Q8D M-2343 TS150 TM4 C XAC-2Q8C M-2344 TS150 TM4 A XAC-2Q8A M-2346 TS115 TM4 CABLE RUN CABLE TAP A A XAC-8A8A C C D F Q CADWELD ® TYPE XA Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 52 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CR-1 CADWELD ® TYPE GR CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER GROUND ROD SIZE CABLE CODE 1/2” A GRC-148A B 5/8” 3/4” CARTRIDGE SIZE PRICE KEY M-5060 TS90 TM4 GRC-148B M-2347 TS90 TM4 C GRC-148C M-5064 TS90 TM4 D GRC-148D M-5061 TS115 TM4 F GRC-148F M-5063 TS115 TM4 Q GRC-142Q M-500 TS90 TM4 A GRC-168A M-5066 TS90 TM4 B GRC-168B M-2353 TS90 TM4 C GRC-168C M-5073 TS115 TM4 D GRC-168D M-5069 TS115 TM4 F GRC-168F M-5071 TS115 TM4 Q GRC-162Q M-508 TS90 TM4 A GRC-188A M-5079 TS90 TM4 B GRC-188B M-5086 TS90 TM4 C GRC-188C M-5085 TS115 TM4 D GRC-188D M-5081 TS115 TM4 F GRC-188F M-5084 TS115 TM4 Q GRC-182Q M-518 TS90 TM4 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 53 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CR-1 CADWELD ® TYPE GR, CONTINUED CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER GROUND ROD SIZE CABLE CODE CARTRIDGE SIZE PRICE KEY 1” A GRC-228A M-2364 TS150 TM4 B GRC-228B M-2365 TS150 TM4 C GRC-228C M-2366 TS150 TM4 D GRC-228D M-2367 TS150 TM4 F GRC-228F M-2368 TS200 TM4 Q GRC-222Q M-528 TS150 TM4 THERMOWELD TYPE CR-2 CADWELD ® TYPE GT CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER GROUND ROD SIZE CABLE CODE CARTRIDGE SIZE PRICE KEY 1/2" A GTC-148A M-5090 TS90 TM4 B GTC-148B M-SM2374 TS90 TM4 C GTC-148C M-2375 TS115 TM4 D GTC-148D M-5091 TS115 TM4 F GTC-148F M-5093 TS115 TM4 Q GTC-142Q M-542 TS115 TM4 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 54 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CR-2 CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER GROUND ROD SIZE CABLE CODE 5/8” A GTC-168A B 3/4" 1” CARTRIDGE SIZE PRICE KEY M-5094 TS90 TM4 GTC-168B M-2381 TS115 TM4 D GTC-168D M-5095 TS150 TM4 C GTC-168C M-5099 TS150 TM4 F GTC-168F M-5098 TS150 TM4 Q GTC-162Q M-550 TS115 TM4 A GTC-188A M-5100 TS90 TM4 B GTC-188B M-5106 TS115 TM4 C GTC-188C M-5105 TS150 TM4 D GTC-188D M-5102 TS150 TM4 F GTC-188F M-5104 TS150 TM4 Q GTC-182Q M-561 TS115 TM4 A GTC-228A M-2392 TS150 TM4 B GTC-228B M-2393 TS150 TM4 C GTC-228C M-2394 TS150 TM4 D GTC-228D M-2395 TS200 TM4 F GTC-228F M-2397 TS250 TM4 Q GTC-222Q M-572 TS150 TM4 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 CADWELD ® TYPE GT, CONTINUED Pa ge 1 55 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CR-3 CADWELD ® TYPE GY GROUND ROD SIZE CABLE CODE CADWELD® MOLD NUMBER THERMOWELD® MOLD NUMBER CARTRIDGE SIZE PRICE KEY 1/2" A GYE-148A M-5107 TS90 TM24 B GYE-148B M-2403 TS115 TM24 C GYE-148C M-5111 TS150 TM24 D GYE-148D M-5108 TS150 TM24 F GYE-148F M-5110 TS150 TM24 Q GYE-142Q M-1583 TS150 TM24 A GYE-168A M-5114 TS90 TM24 B GYE-168B M-2409 TS115 TM24 C GYE-168C M-5118 TS150 TM24 D GYE-168D M-5115 TS150 TM24 F GYE-168F M-5117 TS150 TM24 Q GYE-162Q M-1588 TS150 TM24 A GYE-188A M-5119 TS90 TM24 B GYE-188B M-5125 TS115 TM24 C GYE-188C M-5124 TS150 TM24 D GYE-188D M-5120 TS150 TM24 F GYE-188F M-5123 TS150 TM24 Q GYE-182Q M-1596 TS150 TM24 5/8” 3/4" Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 56 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CR-3 CADWELD ® TYPE GY CONTINUED CADWELD® THERMOWELD® MOLD MOLD NUMBER NUMBER CARTRIDGE SIZE PRICE KEY M-2421 TS90 TM24 GYE-228B M-2422 TS115 TM24 C GYE-228C M-2423 TS150 TM24 D GYE-228D M-2424 TS150 TM24 F GYE-228F M-2425 TS150 TM24 Q GYE-222Q M-1605 TS150 TM24 GROUND ROD SIZE CABLE CODE 1” A GYE-228A B GROUND ROD SIZE NOTES: a. 1/2” ground rods-.505” Actual Diameter. ThermOweld for 1/2” ground rod fits both Copperclad and Stainless Steel ground rods. b. 5/8” ground rods-.563” actual diameter. For full 5/8” (.625) ground rod and rollthreaded rod, add suffix “-N” to mold number, i.e. M-5058-N is full 5/8” diameter ground rod or roll-threaded rod to 4/0 lightning protection cable. c. 3/4” ground rods-.682” actual diameter. For full 3/4” (.750) ground rod and rollthreaded rod, add suffix “-N” to mold number, i.e., M-2420-N is full 3/4” diameter ground rod or roll-threaded rod to 4/0 lightning protection cable. d. 1” ground rods-.914” actual diameter. For full 1” (1.00) ground rod and rollthreaded rod, add suffix “-N” to mold number, i.e., M-2429-N is full 1” diameter ground rod or roll-threaded rod to 4/0 lightning protection cable. Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 57 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CS-1 CADWELD ® TYPE HS CABLE CODE CADWELD® MOLD NUMBER D HSC-8D M-5134 TS115 TM4 F HSC-8F M-5136 TS115 TM4 Q HSC-2Q M-647 TS115 TM4 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER PRICE KEY CS-1 TYPE: CABLE IS OFF SURFACE THERMOWELD TYPE CS-8 CADWELD ® TYPE HA CABLE CODE CADWELD® MOLD NUMBER A HAA-8A M-5127 TS45 TM3+ B HAA-8B M-2455 TS65 TM3+ C HAC-8C M-5133 TS90 TM4 D HAC-8D M-5128 TS115 TM4 F HAC-8F M-5131 TS115 TM4 Q HAC-2Q M-6114 TS115 TM4 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER PRICE KEY CS-8 TYPE: CABLE IS ON SURFACE Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 58 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CS-2 CADWELD ® TYPE HT CABLE CODE CADWELD® MOLD NUMBER D HTC-8D M-5141 TS150 TM4 F HTC-8F M-5143 TS150 TM4 Q HTC-2Q M-619 TS150 TM4 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER PRICE KEY CS-2 TYPE: CABLE IS OFF SURFACE THERMOWELD TYPE CS-3 CADWELD ® TYPE VS CABLE CODE CADWELD® MOLD NUMBER THERMOWELD® MOLD NUMBER CARTRIDGE SIZE PRICE KEY A VSC-8A M-5145 TS65 TM4 B VSC-8B M-5150 TS65 TM4 C VSC-8C M-5149 TS90 TM4 D VSC-8D M-5146 TS115 TM4 F VSC-8F M-5148 TS115 TM4 Q VSC-2Q M-593 TS115 TM4 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 59 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CS-4 CADWELD ® TYPE VV CABLE CODE CADWELD® MOLD NUMBER A VVC-8A M-5153 TS90 TM4 B VVC-8B M-5160 TS115 TM4 C VVC-8C M-5159 TS200 TM17 D VVC-8D M-5154 TS250 TM17 F VVC-8F M-5158 TS150 (2) TM17 Q VVC-2Q M-1223 TS250 TM17 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER THERMOWELD TYPE CS-7 PRICE KEY CADWELD ® TYPE VF CABLE CODE CADWELD® MOLD NUMBER A VFC-8A M-5180 TS90 TM4 B VFC-8B M-5200 TS90 TM4 C VFC-8C M-5185 TS115 TM4 D VFC-8D M-5181 TS150 TM17 F VFC-8F M-5184 TS150 TM17 Q VFC-2Q M-1643 TS150 TM17 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 60 PRICE KEY 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com EXOTHERMIC CONNECTIONS THERMOWELD TYPE CS-6 CADWELD ® TYPE VT CABLE CODE CADWELD® MOLD NUMBER A VTC-8A M-5171 TS90 TM4 B VTC-8B M-5176 TS90 TM4 C VTC-8C M-5175 TS115 TM4 D VTC-8D M-5172 TS150 TM4 F VTC-8F M-5174 TS150 TM4 Q VTC-2Q M-1633 TS150 TM4 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER THERMOWELD TYPE CS-27 PRICE KEY CADWELD ® TYPE VG CABLE CODE CADWELD® MOLD NUMBER A VGC-8A M-5162 TS65 TM4 B VGC-8B M-5169 TS90 TM4 C VGC-8C M-5168 TS115 TM4 D VGC-8D M-5163 TS150 TM4 F VGC-8F M-5167 TS150 TM4 Q VGC-2Q M-2177 TS150 TM4 THERMOWELD® CARTRIDGE SIZE MOLD NUMBER Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 61 PRICE KEY 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com TECHNICAL INFORMATION Fraction, decimal, and millimeter equivalents Fractions 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 Decimals .0156 .0312 .0468 .0625 .0781 .0937 .1093 .125 .1406 .1562 .1718 .1875 .2031 .2187 .2343 .250 .2656 .2812 .2968 .3125 .3281 .3437 .3593 .375 .3906 .4062 .4218 .4375 .4531 .4687 .4843 .500 Millimeters 0.396 0.793 1.19 1.587 1.984 2.381 2.778 3.175 3.571 3.968 4.365 4.762 5.159 5.556 5.953 6.350 6.746 7.143 7.540 7.937 8.334 8.731 9.128 9.525 9.921 10.318 10.715 11.112 11.509 11.906 12.303 12.700 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Fractions 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 Pa ge 1 62 Decimals .5156 .5312 .5468 .5625 .5781 .5937 .6093 .625 .6406 .6562 .6718 .6875 .7031 .7187 .7343 .750 .7656 .7812 .7968 .8125 .8281 .8437 .8593 .875 .8906 .9062 .9218 .9375 .9531 .9687 .9843 1.000 Millimeters 13.096 13.493 13.890 14.287 14.684 15.081 15.478 15.875 16.271 16.668 17.065 17.462 17.859 18.256 18.653 19.050 19.446 19.843 20.240 20.637 21.034 21.431 21.828 22.225 22.621 23.018 23.415 23.812 24.209 24.606 25.003 25.400 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com TECHNICAL INFORMATION Equivalents of sq. mm, sq. in., and circular mils Square Square Cir Mils AWG mm In. 1000 1.550 1974000 975 1.511 1924700 950 1.472 1875300 925 1.434 1826000 900 1.395 1776600 875 1.356 1727300 850 1.317 1677900 825 1.279 1628600 800 1.240 1579200 775 1.201 1529900 750 1.163 1480500 725 1.124 1431200 700 1.085 1381800 675 1.046 1332500 650 1.008 1283100 625 0.969 1233800 600 0.930 1184400 575 0.891 1135100 550 0.853 1085700 525 0.814 1036400 500 0.775 987000 475 0.736 937700 450 0.698 888300 425 0.659 839000 400 0.620 789600 375 0.581 740300 350 0.542 690900 325 0.504 641600 300 0.465 592200 275 0.426 542900 250 0.388 493500 225 0.349 444200 200 0.310 394800 175 0.271 345500 150 0.233 296100 125 0.1938 246800 --211600 4/0 100 0.1550 197400 95 0.1472 187530 90 0.1395 177660 --167800 3/0 85 0.1317 167790 To Convert: Meters to feet Kilometers to feet Feet to meters Feet to kilometers Kilograms to pounds Pounds to kilograms Pounds 1000ft. to pounds 1000 meters Pounds 1000ft. to kilograms 1000 meters Kilograms 1000 meters to pounds 1000 feet C° + 5/9 (°F-32) Square Square mm In. 80 0.1240 75 0.1163 70 0.1085 --65 0.1008 60 0.0930 55 0.0853 --50 0.0775 45 0.0698 --40 0.0620 35 0.0542 --30 0.0465 --25 0.0388 --20 0.0310 19.5 0.0302 19.0 0.0294 18.5 0.0287 18.0 0.0279 17.5 0.0271 17.0 0.0264 --16.5 0.0256 16.0 0.0248 15.5 0.0240 15.0 0.0233 14.5 0.0225 14.0 0.0217 13.5 0.0209 --13.0 0.0201 12.5 0.0194 12.0 0.0186 11.5 0.0178 11.0 0.0171 --10.5 0.0163 10.0 0.0155 Multiply by: 3.2808 3280.8 0.3048 0.0003048 2.205 0.4536 3.2808 1.4882 0.6719 °F=32+5/9 (C°) Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Cir Mils 157920 148050 138180 133100 128310 118440 108570 105600 98700 88830 83690 78960 69090 66360 59220 52620 49350 41740 39480 38490 37510 36520 35530 34550 33560 33090 32560 31580 30600 29610 28620 27640 26650 26240 25660 24680 23690 22700 21710 20820 20730 19740 Pa ge 1 63 AWG 2/0 1/0 1 2 3 4 5 6 7 Square mm 9.5 9.0 8.5 -8.0 7.5 7.0 -6.5 6.0 5.5 -5.0 4.75 4.50 4.25 -4.0 3.75 3.50 -3.25 3.0 2.75 -2.50 2.25 -2.0 1.75 -1.5 -1.25 -1.0 0.9 -0.8 0.75 0.7 -0.6 -0.5 Square In. 0.01472 0.01395 0.01317 -0.01240 0.01163 0.01085 -0.01008 0.00930 0.00853 -0.00775 0.00736 0.00698 0.00659 -0.00620 0.00581 0.00542 -0.00504 0.00465 0.00426 -0.00388 0.00349 -0.00310 0.00271 -0.00233 -0.00194 -0.00155 0.00140 -0.00124 0.00116 0.00109 -0.00093 -0.000775 Cir Mils 18753 17766 16779 16510 15792 14805 13818 13090 12831 11844 10857 10380 9870 9377 8883 8390 8230 7896 7403 6909 6530 6416 5922 5429 5180 4935 4442 4110 3948 3455 3260 2961 2580 2468 2050 1974 1777 1620 1579 1481 1382 1290 1184 1029 987 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com AWG 8 9 10 11 12 13 14 15 16 17 18 19 20 TECHNICAL INFORMATION U.S. to METRIC Conversions U.S. Measure Multiplied By Equals Metric Measure Length Inches x 2.5 = centimeters Feet x 30 = centimeters Yards x 0.9 = meters Miles x 1.6 = kilometers Area Sq. inches x 6.5 = sq. centimeters Sq. feet x 0.09 = sq. meters Sq. yards x 0.8 = sq. meters Sq. miles x 2.6 = sq. kilometers Acres x 0.4 = hectares Weight Ounces x 28 = grams Pounds x 0.45 = kilograms Short tons x 0.9 = tonnes Volume Fluid ounces x 30 = millimeters Pints x 0.47 = liters Quarts x 0.95 = liters Gallons x 3.8 = liters Cubic feet x 0.03 = cubic meters Cubic yards x 0.76 = cubic meters Temperature Fahrenheit = centigrade Temperature -32x5÷9 temperature To calculate the approximate metric measure equivalent to a known U.S. measure, simply multiply the U.S. quantity by the conversion factor in the center column. Example: 563 miles=901 kilometers, approximately. (563 x 1.6 = 900.8.) Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 64 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com TECHNICAL INFORMATION METRIC to U.S. Conversion Length Millimeter X 0.04 = inches Centimeter X 0.4 = inches Meters X 3.3 = feet Meters X 1.1 = yards kilometers X 0.6 = miles Area Sq. centimeters X 0.16 = sq. inches Sq. meters X 1.2 = sq. yards Sq. kilometers X 0.4 = sq. miles hectares X 2.5 = acres Weight Grams X 0.035 = ounces Kilograms X 2.2 = pounds tonnes X 1.1 = short tons Volume Milliliters X 0.03 = fluid ounces Liters X 2.1 = pints Liters X 1.06 = quarts Liters X 0.26 =gallons Cubic meters X 35 = cubic feet Cubic meters X 1.3 = cubic yards Temperature = Fahrenheit Centigrade X 1.8 (+32) temperature temperature To calculate the approximate U.S. measure equivalent to a known metric measure, simply multiply the metric quantity by the conversion factor in the center column. Example: 38 kilograms = 84 pounds, approximately. (38x2.2=83.6.) Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Pa ge 1 65 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com TECHNICAL INFORMATION Schedule 40 Pipe Sizes Nom. Pipe Size (in.) 1/8” 1/4” 3/8” 1/2" 3/4" 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” O.D. Average I.D. Min. Wall 0.405 0.540 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 0.249 0.344 0.473 0.602 0.804 1.029 1.360 1.590 2.047 2.445 3.042 3.521 3.998 5.016 6.031 7.942 9.976 11.889 13.073 14.940 16.809 18.743 22.544 0.068 0.088 0.091 0.109 0.113 0.133 0.140 0.145 0.154 0.203 0.216 0.226 0.237 0.258 0.280 0.322 0.365 0.406 0.437 0.500 0.562 0.593 0.687 Schedule 80 Pipe Sizes Nom. Wt./Ft. 0.051 0.086 0.115 0.170 0.226 0.333 0.450 0.537 0.720 1.136 1.488 1.789 2.118 2.874 3.733 5.619 7.966 10.534 12.462 16.286 20.587 24.183 33.652 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Nom. Pipe Size (in.) 1/8” 1/4” 3/8” 1/2" 3/4" 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” Pa ge 1 66 O.D. Average I.D. Min. Wall Nom. Wt./Ft. 0.405 0.540 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 .195 .282 .403 .526 .722 .936 1.255 1.476 1.913 2.290 2.864 3.326 3.786 4.768 5.709 7.565 9.493 11.294 12.410 14.213 16.014 17.814 21.418 0.095 0.119 0.126 0.147 0.154 0.179 0.191 0.200 0.218 0.276 0.300 0.318 .0337 0.375 0.432 0.500 0.593 0.687 0.750 0.843 0.937 1.031 1.218 0.063 0.105 0.146 0.213 0.289 0.424 0.586 0.711 0.984 1.500 2.010 2.452 2.938 4.078 5.610 8.522 12.635 17.384 20.852 26.810 33.544 41.047 58.233 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com TECHNICAL INFORMATION CABLE AND WIRE CHART AWG Diameter in Inches Circular Mills 0 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 0.46 0.4096 0.3648 0.3249 0.2893 0.2576 0.2294 0.2043 0.1819 0.162 0.1443 0.1285 0.1144 0.1019 0.0907 0.0808 0.072 0.0641 0.571 0.508 0.453 211600 167800 133100 105600 83690 66360 52620 41740 33090 26240 20820 16510 13090 10380 8230 6530 5180 4110 3260 2580 2052 Pr efe rr ed L igh tn in g Pr ote ct io n 2 100 East F irst St re et Mar yville, MO 64468 Is su e D ate: J un e 201 3 Cross Sectional Area in Sq. Inches 0.1662 0.1318 0.1045 0.08291 0.06573 0.05212 0.04133 0.03278 0.02599 0.02061 0.01635 0.01297 0.01028 0.00816 0.00646 0.00513 0.00407 0.00323 0.00256 0.00203 0.00161 Pa ge 1 67 LB/1000FT. Copper Aluminum 640.5 507.8 402.8 319.5 253.3 200.9 159.3 126.3 100.2 79.4 63 49 39.6 31.4 24.9 19.8 15.7 12.4 9.8581 7.8178 6.1998 194.7 154.4 122.4 97.13 77 61.07 48.43 38.39 30.46 24.15 19.16 15.19 12.04 9.55 7.57 6.02 4.77 3.77 2.9951 2.3752 1.8837 8 66- 299- 740 6 o r 66 0-5 62- 277 1 F ax: 660 -58 2-2 603 s a les @p ref er red lp .co m w ww .pref er re d lp .com