lumentranslator™
INSTALLATION INSTRUCTIONS
drawing number 111489
This product must be installed in accordance with applicable national and local electrical and construction
codes by a person familiar with the construction and operation of the product and the hazards involved.
Failure to comply with the following installation instructions may result in death or serious injury.
!
WARNING
!
!
INSTALL ALL MOUNTING
HARDWARE ACCORDING
TO MANUFACTURER
MOUNTING GUIDE
REMOVE LUMENTRANSLATOR FROM J-BOX
1x Lumentranslator card
1x double gang
junction box
(recessed or surface)
WARNING
!
DISCONNECT POWER BEFORE
INSTALLING OR SERVICING
TO AVOID ELECTRICAL SHOCK.
!
UNAUTHORIZED FIELD REPAIRS WILL VOID WARRANTY
AS DELIVERED
WARNING
!
CAUTION
WARNING
DO NOT EXCEED DEVICE SPECIFIED VOLTAGE.
DO NOT USE IF PARTS OR CONNECTORS ARE DAMAGED.
LOCAL & REMOTE INSTALLATION
WARNING
SEPARATION OF FIELD INSTALLED
POWER LIMITED CIRCUIT
(DIMMING/CONTROL)
WIRING FROM THE BRANCH CIRCUIT
WIRING IN THE OUTLET BOX ARE
TO BE MADE IN ACCORDANCE
WITH LOCAL AND/OR NATIONAL
ELECTRICAL INSTALLATION CODES.
4x black slotted screw
#6-32 3/4"
REMOVE LUMENTRANSLATOR CARD FROM J-BOX
BY UNSCREWING 4x #6-32 3/4"
1x blank double gang cover plate
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICE
4X
MAKE ELECTRICAL CONNECTIONS - 0-10V DIMMER
INSTALL J-BOX TO STRUCTURE
Junction box
Front view
From dimmer
or controller
(typical 0-10V
dimmer wire
colors shown)
TOP VIEW
purple
Lumentranslator card
Back view
purple Data+
orange No connection
gray Ground
gray
white Neutral
To
fixtures
black Line
green
TOP VIEW
RECESSED JUNCTION BOX
INSTALLATION DETAIL
!
REMOTE & SURFACE JUNCTION BOX
INSTALLATION DETAIL
WARNING
USE FASTENERS (BY OTHERS)
THAT ARE APPROPRIATE FOR USE WITH
YOUR MOUNTING SURFACE.
120V/277V
input
N.B. Wire colors from
different dimmer or controller
types may vary. Consult
Lumentranslator Wiring detail
for connection information.
From dimmer
or controller
(typical DALI
controller wire
colors shown)
To
fixtures
purple
purple
Lumentranslator card
Back view
white Neutral
120V/277V
input
2013.10.21
EM - R1
/ USE
POWER -120/277V
POWER +120/277V
GROUND
NO CONNECTION
DATA +
Lumentranslator card
Back view
purple Data+
orange Data gray DMX shield
white Neutral
black Line
green
120V/277V
input
N.B. Wire colors from
different dimmer or controller
types may vary. Consult
Lumentranslator Wiring detail
for connection information.
p.1/2
purple
orange
DMX shield
To
fixtures
black Line
green
WHITE
BLACK
GRAY
ORANGE
PURPLE
Junction box
Front view
From dimmer
or controller
(typical DMX
controller wire
colors shown)
purple Data 1
orange Data 2
gray No connection
TRANSLATOR CARD
WIRE COLOR
MAKE ELECTRICAL CONNECTIONS - DMX CONTROLLER
MAKE ELECTRICAL CONNECTIONS - DALI CONTROLLER
Junction box
Front view
American and CE Wiring detail
American and CE Wiring detail
TRANSLATOR CARD
WIRE COLOR
WHITE
BLACK
GRAY
ORANGE
PURPLE
/ USE
POWER -120/277V
POWER +120/277V
NO CONNECTION
DATA 2
DATA 1
N.B. Wire colors from
different dimmer or controller
types may vary. Consult
Lumentranslator Wiring detail
for connection information.
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P. 514.937.3003 F. 514.937.6289
info@lumenpulse.com www.lumenpulse.com
Copyright © 2013 Lumenpulse
Confidential and proprietary
Lumenpulse reserves the right to make changes to this product and related instructions at any time without prior notice
and such changes shall be effective immediately. See www.lumenpulse.com/support/downloads for current data and instructions.
American and CE Wiring detail
TRANSLATOR CARD
WIRE COLOR
WHITE
BLACK
GRAY
ORANGE
PURPLE
/ USE
POWER -120/277V
POWER +120/277V
DMX SHIELD
DATA DATA +
lumentranslator™
INSTALLATION INSTRUCTIONS
drawing number 111489
!
This product must be installed in accordance with applicable national and local electrical and construction
codes by a person familiar with the construction and operation of the product and the hazards involved.
Failure to comply with the following installation instructions may result in death or serious injury.
MAKE ELECTRICAL CONNECTIONS - TRIAC DIMMER
MAKE ELECTRICAL CONNECTIONS - ELV DIMMER
Junction box
Front view
From dimmer
or controller
(typical ELV
dimmer wire
colors shown)
To
fixtures
black
From dimmer
or controller
(typical TRIAC
dimmer wire
colors shown)
white Neutral
red
black
white Neutral
black Line
green
120V/277V
input
120V/277V
input
American and CE Wiring detail
TRANSLATOR CARD
WIRE COLOR
WHITE
BLACK
GRAY
ORANGE
PURPLE
/ USE
POWER -120/277V
POWER +120/277V
NEUTRAL
DIMMED HOT
HOT (LINE)
N.B. Wire colors from
different dimmer or controller
types may vary. Consult
Lumentranslator Wiring detail
for connection information.
INSTALL LUMENTRANSLATOR CARD IN J-BOX AND CLOSE COVER
INSTALL LUMENTRANSLATOR CARD BACK IN THE J-BOX
p.2/2
2013.10.21
EM - R1
Lumentranslator card
Back view
purple Dimmed Hot
orange Hot (line)
gray No connection
To
fixtures
black Line
green
N.B. Wire colors from
different dimmer or controller
types may vary. Consult
Lumentranslator Wiring detail
for connection information.
Junction box
Front view
Lumentranslator card
Back view
purple Hot (line)
orange Dimmed Hot
gray Neutral
yellow
white
LOCAL & REMOTE INSTALLATION
4X
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6 1.877.937.3003 P. 514.937.3003 F. 514.937.6289
info@lumenpulse.com www.lumenpulse.com
Copyright © 2013 Lumenpulse
Confidential and proprietary
Lumenpulse reserves the right to make changes to this product and related instructions at any time without prior notice
and such changes shall be effective immediately. See www.lumenpulse.com/support/downloads for current data and instructions.
American and CE Wiring detail
TRANSLATOR CARD
WIRE COLOR
WHITE
BLACK
GRAY
ORANGE
PURPLE
AS INSTALLED
/ USE
POWER -120/277V
POWER +120/277V
NO CONNECTION
HOT (LINE)
DIMMED HOT