Catalogue 2 014
Contents
Anchoring / Mooring
4
Audio36
Barbeques54
Chandlery62
Cleaners & Polishes
82
Clothing / Shoes / Bags
88
Electrical - BEP
100
Electrical134
Electronics & Navigation
156
Engine & Outboard Accessories
175
Fishing198
Fittings & Vents
212
Galley - Fridge - Cookers
231
Hatches/Ports252
Lights266
Plumbing/Pumps288
Safety314
Seats - Tables
329
Trailer Components
336
Trim Tabs
348
Windscreen Wipers
353
3
Anchoring / Mooring
6. Rocna Anchors
22. Drum Winches 29. Chain & Rope
RRR / Fisherman
Galvanised
Stainless Steel
Stress Free Mini Free Fall Drum
Winch
Stress Free Midi Free Fall Drum
Winch
Stress Free Maxi Free Fall Drum
Winch
Stress Free Mighty Free Fall Drum
Winch
MaXtek Drum Winch 600W
CMP Anchor Chain - DIN766
Dyneema Polyester Covered Drum
Winch Rope
MaXtek Rope / Chain Packages
Rope Cutter and Sealer
Polypropylene Rope Packs
24. Switch Gear
Chain Joining Links
Bow Shackles
Nylon Thimbles
MaXtek SS Dee Shackles
Dee Shackles
Carver Shackles
Folding Grapnel Anchors.
Danforth Anchors
10. Windlasses
Maxwell Windlass RC6 500W
Maxwell Windlass RC8-6 / RC8-8
The Nautilus V500 Windlass
Anchor Winch SS 600/900
Anchor Winch SS 900 with
Capstan
Anchor Winch Vertical SS 600/900
Above Deck Winch 900
Anchor Winch SS 1500
Anchor Winch SS 1500 with
Capstan
18. Capstans
James Nilsson Rope/AnchorCapstan C400
James Nilsson Rope/AnchorCapstan HSC400
James Nilsson Rope/AnchorCapstan CH400
James Nilsson Rope/AnchorCapstan C800
James Nilsson Rope/AnchorCapstan C1600
James Nilsson Utility/Furling
Capstan - CF1200
James Nilsson Utility/Furling
Capstan - CF1900
James Nilsson Docking/Mooring
Capstan - CD1400
James Nilsson Docking/Mooring
Capstan - CD2400
4
Windlass Wireless Controller &
Remote
Splashproof Windlass Up / Down
Switch with On/Off
Windlass Up / Down Toggle Switch
Universal Foot Switch for Windlass
Up & Down
Foot Switch for Windlass
Circuit Breakers - Switchable
Heavy Duty Solenoid - 3 Wire
Motors
Heavy Duty Solenoid - 2 Wire
Motors
26. Bow Rollers
Self Launching Bow Roller - 950mm
CAN Whale Self Launching Bow
Roller
Self Launching Bow Roller -750mm
Self Launching Bow Roller -580mm
Self Launching Bow Roller -415mm
Self Launching Bow Roller -400mm
Hinged Bow Roller
Hinged Bow Roller with Yoke
Bow Roller Hinged for Self Launch
Bow Roller - Single Roller
Extended Bow Roller
Bow Roller with guides
Bow Roller
Bow Roller Guide - 208mm
Bow Roller Guide - 150mm
Stolts Anchor Roller RP30
Stolts Anchor Roller RP444
Euroglide 2” Bow Roller Red
Euroglide 3” Bow Roller Red
3” Bow Roller - Black Rubber
3” Bow Roller - Yellow Poly Vinyl
4” Bow Roller - Yellow Poly Vinyl
Roller - Black Polypropylene
30.Anchors &
Shackles
31.Anchors
Swivesl &
Straighteners
Kong Anchor Swivel - 12/13/14mm
Kong Anchor Swivel - 8/10/12mm
Kong Anchor Swivel - 6/7/8mm
Anchor Swivels
Anchor Straightener Galvanised &
Stainless Steel
Hawse Pipe
Stainless Steel Chain Stopper
32. Accessories
Sea Anchors - Lalizas
Sea Anchor Professional
Lifebuoy Drogue / Sea Anchor for
Horseshoe
Dock Wheel
Mooring Dock Lines
Rubber Mooring Line Spring
Stainless Mooring Spring
Lalizas Race Mark Buoy
Kiwi Klaw - Rope Gripper
Kayak Anchor Pack with Winder
Lifebuoy Drogue / Sea Anchor for
Horseshoe
35. Fenders
Hercules Single Eyelet Fender
Hercules Round Single Eyelet
Fenders - Red
Hercules Fenders - Double Eyelet
R o c n a A n c h o r s - THE NEXT GENERATION IN ANCHORING
Rocna Anchor - RRR / Fisherman
The Rocna Fisherman - Rock and Reef Retrievable.
The shackle rail allows you to retrieve the anchor from the
opposite direction if the anchor becomes fouled.
NOT for overnight use, limited to sizes 4 kg and 6 kg for this reason.
Part Numbers:
ROCNA04RRR - 4 kg
ROCNA06RRR- 6 kg
Rocna Anchors - Galvanised
* We Guarantee this is the best anchor you will ever own!
* Rapid Set on virtually any ocean floor
* Industry Leading holding power (RINA rated SHHP)
* Easy to use with auto launch and secure stow
Part Numbers:
ROCNA04 - 4 kg \ 9 lbs
ROCNA06 - 6 kg \ 13 lbs
ROCNA10 - 10 kg \ 22 lbs
ROCNA15 - 15 kg \ 33 lbs
ROCNA20 - 20 kg \ 44 lbs
ROCNA25 - 25kg \ 55 lbs
ROCNA33 - 33 kg \ 73 lbs
ROCNA40 - 40 kg \ 88 lbs
ROCNA55 - 55kg \ 121 lbs
ROCNA70 - 70 kg \ 154 lbs
ROCNA110 - 110kg \ 243 lbs
Rocna Anchor - Stainless Steel
Rocna’s legendary anchor in Highly Polished Stainless Steel
Part Numbers:
ROCSS04 - 4 kg
ROCSS06 - 6 kg
ROCSS10 - 10 kg
ROCSS15 - 15 kg
ROCSS20 - 20 kg
ROCNA25 - 25kg
6
ROCSS33 - 33 kg
ROCSS40 - 40 kg
ROCSS55 - 55kg
ROCSS70 - 70 kg
ROCSS110 - 110kg
R o c n a A n c h o r s - THE NEXT GENERATION IN ANCHORING
Rocna Anchor - Bottle Opener
Genuine Rocna Bottle Opener!
Very much the same as your Rocna anchor for your boat, but a considerable amount
smaller and can even be used to open bottles!
Part Number : ROCNABO
Rocna Story
This new anchor design was developed in 2004 by very well
respected designer Peter Smith of Auckland. Peter an avid
international yachtsman was dissatisfied with poor performing
anchors and decided that there must be a better way. From
humble beginnings it began as a solution to his personal
requirements, but soon word of mouth spread.
The merits of the Rocna anchor design have become
legendary and with it came international success.
If you are overnighting a Rocna anchor will let you sleep at night;
no matter what the weather throws at you. If you are a fisherman
you can be sure that Rocna will hold you on your favourite spot.
* Rocna sets within its length
* Rocna anchors dig straight in
* Rocna anchors stay put
* Rocna offers superior holding-power
* Rocna anchors do not have lead or cast iron in the blade
7
R o c n a A n c h o r s - THE NEXT GENERATION IN ANCHORING
New Rocna Lifetime Warranty
Rocna Anchors stand behind the product with the best warranty available. The warranty has been expanded to include bending or
deformation, in addition to breakage, in a new warranty policy. It applies to the lifetime of the original purchaser when the anchor is sized
appropriately for the boat, using Rocna’s sizing recommendations.
Rocna Key Features:
Super-high holding power :
Testing demonstrates that a Rocna possesses stopping power vastly superior to equivalent weight plough or claw types in soft sand or
mud, due to the large blade area coupled with the blade’s concave shape, which offers the greatest resistance of any form
Instant setting :
A Rocna always attains the correct attitude for penetration, and with its combination of chisel tip, roll-bar, and skids, is rapidly buried on
most seabeds – typically within one metre (three feet)
Large blade area and chisel blade tip :
On a boat weight matters, and in a Rocna anchor every gram of metal is put to use. A large concave surface blade area offers superior
holding power, and the chisel-like blade tip easily penetrates weed, grass, and kelp
Roll-stable :
A Rocna is not susceptible to sudden “trip out”. Owing to its optimized geometry, it remains embedded, and does not roll out on load
reversal or if dragged under extreme load
Ease of use :
A Rocna self-launches and locks home on most bow rollers. A tight curve radius between the shank and blade give a positive lock,
preventing movement at sea. The slotted shackle attachment point allows single-shackle fixing, and special holes are positioned for a
buoyed retrieval line and tandem anchor, if required
Roll-bar :
A Rocna’s roll-bar ensures that the anchor will turn itself to the correct attitude for setting, every time. The skid-rails then direct the blade
into the seabed. This also eliminates the need for dedicated tip-weight (an inefficiency common in other designs)
Versatility :
There is a Rocna to suit your boat, whether she’s a small runabout or a vessel displacing 50 tons. Larger sizes can be custom designed for
your vessel (please enquire)
Rugged strength :
The heavy-duty construction of a Rocna is attained through clever design and the use of high tensile steel. A Rocna is rock solid with no
moving parts, eliminating complex adjustment systems and potentially dangerous failure points
Durable :
A hot dip galvanized finish covers the entire surface of every Rocna with protective zinc, including the interior of the hollow roll bar
8
R o c n a A n c h o r s - THE NEXT GENERATION IN ANCHORING
Rocna Sizing Guidelines
Unlike other manufacturers, our sizing recommendations are conservative and intended to provide an anchor adequate for use in most/all
conditions.
We base our calculations on 50 knots wind, associated surge, and soft moderate holding bottoms into which it is assumed the anchor has
set. Adequate scope is assumed. This is far in excess of most manufacturers.
To choose the correctly sized Rocna, match your vessel’s length with the most appropriate displacement range, also bearing in mind
conditions of intended use (if in doubt, give preference to the larger anchor model).
1 t = 1,000 kg | * Weights and areas may vary slightly
For multi-hulls: use the chart as instructed, then select the model one size larger
9
W i n d l a s s - Winches
Maxwell Windlass RC6 - 500W
Low profile model. Powerful and compact windlass.
Vertical gearbox and motor in stainless steel.
Made for quick installation.
The RC6 features Maxwell’s revolutionary, and patented
new Wave Design™ chainwheel.
Manual free fall with adjustable clutch.
Offers long term trouble free operation.
With motor/gear underneath deck offer this model has very
smooth and silent operation.
Works with chain only or rope/chain combination.
Parts above deck are available in highly polished stainless steel 316.
Part Number :
MRC6 - 500w Stainless Steel
Maxwell’s revolutionary new chainwheel.
Maxwell once again leads the market in innovative thinking
with the introduction of their latest Wave Design™ chainwheel.
This patented rope/chain wheel incorporates two unique design
concepts that greatly improve the handling and control of the rope/
chain spliced rode.
The Wave Design chainwheel is fitted to all RC Series windlasses,
designed for anchor rodes with any marine grade chain, G4, BBB,
Proof Coil and Metric.
Chainwheel’s unique Wave Design™ action
Maxwell Windlass RC6 Specs
Motor
Voltage
Static Hold
Max power pull
Circuit breaker
Drop speed chain
Weight
500 watt
12 volt
700 kg / 1543 lbs
350 kg / 770lbs
70 Amp
24 m / 78ft
8.5kg - 18lbs
Gypsy Options:
7mm DIN 766 Chain
12mm - 1/2” Rope
196 80 145 209 65 39
7 3/4 3 3/16 5 3/4 8 1/4 2 1/2 1 9/16
10
W i n d l a s s - Winches
Maxwell Windlass RC8-6 / RC8-8
Low profile model. Powerful and compact windlass.
Vertical gearbox and motor in stainless steel.
Made for quick installation.
The RC8 features Maxwell’s revolutionary, and patented
new Wave Design™ chainwheel.
Manual free fall with adjustable clutch.
Offers long term trouble free operation.
With motor/gear underneath deck offer this model has very
smooth and silent operation.
Works with chain only or rope/chain combination.
Parts above deck are available in highly polished stainless steel 316.
Part Numbers :
MRC8-6 Stainless Steel - 600W
MRC8-8 Stainless Steel - 1000W
Maxwell’s revolutionary new chainwheel.
Maxwell once again leads the market in innovative thinking
with the introduction of their latest Wave Design™ chainwheel.
This patented rope/chain wheel incorporates two unique design
concepts that greatly improve the handling and control of the rope/
chain spliced rode.
The Wave Design chainwheel is fitted to all RC Series windlasses,
designed for anchor rodes with any marine grade chain, G4, BBB,
Proof Coil and Metric.
Chainwheel’s unique Wave Design™ action
Maxwell Windlass RC8-6 Specs
Motor
600 watt
Voltage
12 volt
Static Hold
1200 kg / 2640 lbs
Max power pull
350 kg / 770lbs
Circuit breaker
80 Amp
Drop speed chain
28 m / 92ft
Weight
12.5kg - 27.5lbs
Gypsy Options:
6-7mm / 1/4”
RC8 Capstan Version. Available on request.
RC8-8 Specs
1000 watt
12 volt
1200 kg / 2640lbs
600 kg / 1320lbs
135 Amp
32 m / 105ft
16.5kg / 36.3lbs
8mm / 5/16”
G
RC8-6
RC8-8
1
2
G
H
I
J
1
2
G
H
I
J
210 83 146 156 200 245 383 65 40 66 44
8 5/16 3 5/16 5 3/4 6 3/16 7 7/8 9 5/8 15 2 1/2 1 5/8 2 5/8 1 3/4
210 83 146 156 208 272 410 65 40 66 44
8 5/16 3 5/16 5 3/4 6 3/16 8 1/4 10 3/4 16 1/4 2 1/2 1 5/8 2 5/8 1 3/4
11
W i n d l a s s - Winches
Origin of Nautilus
“How can we create a better anchoring system?” This is the question that evolved into a company motto and for Richard Tung and Robert
Matos which was the foundation for Nautilus Anchoring Systems. Together, they committed to solve this question for their customers and
merge more than 40 years of combined experience into one company that is quickly becoming known as a leader in high quality marine
products.
The movement of a nautilus is very similar to the performance of an anchor and windlass. When a nautilus is “sleeping”, its expanded and
adhesive tentacles will ensure safe hold onto the reef to prevent floating with the tide. Having a Nautilus Anchoring System on your boat,
you will enjoy the most relaxing boating experience freely and safely.
The nautilus’ captivating shell presents one of the finest natural examples of a logarithmic spiral that is related to the golden ratio. In terms
of product designs, we focus on every detail from precision to perfection and provide aesthetic value to customers.
Nautilus is always thinking about the simultaneous function and appearance one step before you. And we know how much you aspire to
have a stylish boat.
You just can’t have an extraordinary boat without a Nautilus Anchoring System.
NAUTILUS - PULLING FOR YOU
12
W i n d l a s s - Winches
The Nautilus V500 Windlass
Nautilus says “How can we create a better anchoring system?” This is the question that evolved into a company and created the
foundation for Nautilus Anchoring Systems.
On numerous tests the Nautilus V500 Windlass can tackle rope/chain splices and knots with ease without becoming jammed.
2011 IBEX Awarded the deck and Equipment WINNER.
Judge Susan Canfield noted;
“The well engineered windlass tension band keeps
the rope and chain splice in constant contact with the
chain wheel easily handling knots and hackles of life at
anchor”
Features:
*16-30ft Boats
*Innovative Patented Design
*Sleek Robust Construction
*Manual free-fall system.
*Bright polished and compact design.
*Tensioning band keeps rope/chain splice in constant contact with chain wheel for smooth rope to chain transition.
*Safety cover design prevents injury to hands and fingers.
*Easy access to service and maintain by allowing the windlass top to be removed.
*Time saving installation and minimum tools required.
*Radius rope stripper allows windlass to use 3 strand or 8 plait braided rope.
*Dual purpose clutch handle can tighten clutch and remove cover.
*Gearmotor can be installed quickly in tight areas without tools.
*Windlass includes clutch handle.
Technical Specifications:
Actual Max Pull: 332 KG
Actual Working Load: 83 KG
Actual Rope Speed: 33.8 MPM
Actual Chain Speed: 34.5 MPM
Motor Watts: 500w
Part Number: MTV500
13
W i n d l a s s - Winches
Anchor Winch Stainless 600 / 900
Low profile model. Powerful and compact windlass. Vertical
shaft in stainless steel and horizontal motor.
Highspeed drop of up to 40 m/120 ft. per. min.
Manual free fall with adjustable clutch.
Offers long term trouble free operation.
With motor/gear underneath deck offer this model has very
smooth and silent operation.
Works with chain only or rope/chain combination.
Parts above deck are available in highly polished stainless
steel 316.
Part Number :
B912/7 - 900w Stainless Steel
Anchor Winch Stainless 900 with
Capstan
Powerful and compact windlass. With capstan for optional
warping operation.
Vertical shaft in stainless steel and horizontal motor.
Highspeed drop of up to 40 m/120 ft. per. min.
Manual free fall with adjustable clutch.
Offers long term trouble free operation.
With motor/gear underneath deck offer this model a very smooth
and silent operation.
Works with chain only or rope/chain combination.
Parts above deck are available in highly polished stainless
steel 316.
Part Number :
B912C/7 - 900w Stainless Steel
Anchor Winch Stainless 900 Specs
Motor
Voltage
Max working load
Max power pull
Current draw
Drop speed chain
Weight
Gypsy Options:
7mm DIN 766 Chain
12mm - 1/2” Rope
14
600 watt
12 volt
150 kg / 330lbs
450 kg / 990lbs
33 Amp
26 m / 78ft
9kg - 20lbs
900 watt
12 volt
220 kg / 484 lbs
660 kg/1452lbs
55 Amp
40 m / 120 ft
9kg - 20lbs
W i n d l a s s - Winches
Anchor Winch Vertical Stainless 600 / 900
Low profile model. Powerful and compact windlass. Vertical gearbox and
motor in stainless steel.
Made for quick installation.
Highspeed drop of up to 25m per/min.
Manual free fall with adjustable clutch.
Offers long term trouble free operation.
With motor/gear underneath deck offer this model has very smooth and
silent operation.
Works with chain only or rope/chain combination.
Parts above deck are available in highly polished 316 stainless steel.
Part Numbers :
BV612/7 - 600w Stainless Steel
BV912/7 - 900w Stainless Steel
Vertical Stainless Steel Specs
Motor
Voltage
Max working load
Max power pull
Current draw
Drop speed chain
Weight
600 watt
12 volt
50 kg / 110lbs
150 kg / 330lbs
60 Amp
25 m / 78ft
8.5kg - 18lbs
900 watt
12 volt
80 kg / 176 lbs
220 kg/484lbs
80 Amp
25 m / 120 ft
8.5kg - 18lbs
Gypsy Options:
7mm DIN 766 Chain
12mm - 1/2” Rope
Above Deck 900
Anchor Winch 900watt 12 Volt
Heavy Duty Stainless Steel Anchor Winch
A perfect choice for boaters with limited space underneath
the deck or with thick deck plates because the whole windlass
mounts above the boat’s deck.
Powerful and compact
Suitable for boats from 15 to 30 ft *(vessel weight also needs
to be considered)
Works with chain only or rope/chain combination
Part Number :
SS912/7
SS912/8
Above Deck 900 Specs
Motor
Voltage
Max working load
Max power pull
Current draw
Drop speed chain
Weight
Gypsy Options:
7mm DIN 766 Chain
12mm - 1/2” Rope
900 watt
12 volt
250 kg / 550 lbs
750 kg/1650 lbs
55 Amp
35 m / 115 ft
13 kg / 29 lbs
15
W i n d l a s s - Winches
Anchor Winch Stainless 1500
Powerful 1500 watt motor.
Low profile model.
Vertical shaft in stainless steel.
Highspeed drop of up to 40 m/120 ft. per min.
Manual free fall with adjustable clutch.
Parts above deck in high polished stainless steel 316.
Offers long term troublefree operation.
With motor/gear under deck offer this model a smooth and
silent operation.
Works with chain only or rope/chain combination.
Part Number : MC1512/10
Anchor Winch Stainless 1500 with
Capstan
Powerful 1500 watt motor. With capstan for optional warping
operations.
Vertical shaft in stainless steel.
Highspeed drop of up to 40 m/120 ft. per min.
Manual free fall with adjustable clutch.
Parts above deck in high polished stainless steel 316.
Offers long term troublefree operation.
With motor/gear under deck offer this model a smooth and
silent operation.
Works with chain only or rope/chain combination.
Part Number : MC1512C/10
Anchor Winch Stainless 1500 & with Capstan Specs
Motor
Voltage
Max working load
Max power pull Current draw
Drop speed chain
Weight
Gypsy Options:
8mm DIN 766 Chain
14mm - 9/16” Rope
16
1500 watt
12 or 24 volt
485 kg/ 1067 lbs
1200 kg/ 2640 lbs
115 or 65 Amp
40 m / 120 ft
27kg - 60lbs
W i n d l a s s - James Nilsson Capstans
Seawinch Boat Capstans manufactured by James Nilsson Winchmakers
Exclusively distributed by Absolute Marine.
* A range of speeds and power to choose from * New Zealand made - better service
* Lower cost - lower maintenance * Safer - will not run back under load
* Fit any deck thickness - easily * Install or remove in minutes * High quality European motor
James Nilsson Rope/Anchor Capstan C400
Seawinch C400 Anchor and Pot Hauler Capstan.
Powerful 600 watt motor specifically designed for quick anchor and pot
hauling recovery.
Installed by leading NZ boat builders and proven in NZ conditions for reliability.
Auto action roller clutch - will not run back.
For boats to 7 metres / 21 feet
New Zealand made.
“Steady” pull indicates long run load typical of deep water anchor recovery,
pot recovery (for example) . The “Snatch” pull is a maximum momentary pull
the winch is capable of.
Pull (KG) Rating 36 110 180 Speed
(M/min)
Steady 24 Short Runs
18 Snatch 15 Current (Amps) Volts DC
34
12
78
12
12
Part Number : C400
James Nilsson Capstan Warranty Policy
James Nilsson winches are covered by a three year return to factory warranty
against defective materials or workmanship, except motors and seals which
are covered by a one year warranty.
Warranty does not cover damage due to improper use or poor maintenance.
If a fault develops during the warranty period DO NOT remove any parts or
attempt a repair.
Remove the winch/motor assembly in one piece from the boat and return it to
your supplier or the manufacturer with evidence of purchase, a description of
the installation and problem experienced.
17
W i n d l a s s - James Nilsson Capstans
James Nilsson Rope/Anchor Capstan HSC400
Seawinch HSC400 Anchor and Pot Hauling Capstan.
Powerful 600 watt motor specifically designed for high speed anchor and pot
hauling recovery.
Installed by leading NZ boat builders and proven in NZ conditions for reliability.
Auto action roller clutch - will not run back.
New Zealand made.
“Steady” pull indicates long run load typical of deep water anchor recovery, pot
recovery (for example) . The “Snatch” pull is a maximum momentary pull the
winch is capable of.
Pull (KG) Rating 36 110 184 Speed
(M/min)
Steady 39 Short Runs
28 Snatch 20 Current (Amps) Volts DC
48
12
105
12
12
Part Number : HSC400
James Nilsson Rope/Anchor Capstan CH400
CH400 Foot Mounted Anchor and Pot Hauling Capstan
Powerful 400 watt motor specifically designed for quick anchor and pot hauling
recovery.
Installed by leading NZ boat builders and proven in NZ conditions for reliability.
Auto action roller clutch - will not run back.
New Zealand made.
“Steady” pull indicates long run load typical of deep water anchor recovery, pot
recovery (for example) . The “Snatch” pull is a maximum momentary pull the
winch is capable of.
Pull (KG) Rating N/A
36 180 Speed
(M/min)
N/A
24 Steady
7 Short Runs
6 Part Number : CH400
18
Current (Amps) Volts DC
15
36
12
50
12
W i n d l a s s - James Nilsson Capstans
James Nilsson Rope/Anchor Capstan C800
Seawinch C800 Anchor and Pot Hauler Capstan.
Powerful 600 watt motor specifically designed for quick anchor and pot
hauling recovery.
Installed by leading NZ boat builders and proven in NZ conditions for reliability.
Auto action roller clutch - will not run back.
For boats to 11 metres / 36 feet
New Zealand made.
“Steady” pull indicates long run load typical of deep water anchor recovery,
pot recovery (for example) . The “Snatch” pull is a maximum momentary pull
the winch is capable of.
Pull (KG) Rating 75 150 365 Speed
(M/min)
Steady 18 Short Runs
13 Snatch 8 Current (Amps) Volts DC
54
12
88
12
12
Part Number : C800
James Nilsson Rope/Anchor Capstan C1600
Seawinch C1600 Anchor and Pot Hauler Capstan.
Powerful 600 watt motor specifically designed for quick anchor and pot
hauling recovery.
Installed by leading NZ boat builders and proven in NZ conditions for reliability.
For boats to 14 metres / 45 feet
New Zealand made.
Auto action roller clutch - will not run back.
“Steady” pull indicates long run load typical of deep water anchor recovery,
pot recovery (for example) . The “Snatch” pull is a maximum momentary pull
the winch is capable of.
Pull (KG) Rating 145 290 725 Speed
(M/min)
Steady 14 Short Runs
11 Snatch 5 Current (Amps) Volts DC
78
12
100
12
12
Part Number : C1600
19
W i n d l a s s - James Nilsson Utility and Furling Capstans
James Nilsson Utility and Furling Capstan
CF1200
Seawinch CF1200 Utility and Furling Capstan
For general purpose lifting and hauling where the speed of an anchor capstan is
not required
Powerful 1000 watt motor specifically designed for quick anchor and pot hauling
recovery.
“Steady” pull indicates long run load typical of deep water anchor recovery, pot
recovery (for example) . The “Snatch” pull is a maximum momentary pull the
winch is capable of.
Pull (KG) Rating 110
250
550 Speed
(M/min)
Steady
11.5 Short Runs
9.5 Snatch
5 Current (Amps) Volts DC
45
12
78
12
12
Part Number : CF1200
James Nilsson Utility and Furling Capstan
CF1900
Seawinch CF1900 Utility and Furling Capstan
For general purpose lifting and hauling where the speed of an anchor capstan is
not required
Powerful 1000 watt motor specifically designed for quick anchor and pot hauling
recovery.
“Steady” pull indicates long run load typical of deep water anchor recovery, pot
recovery (for example) . The “Snatch” pull is a maximum momentary pull the
winch is capable of.
Pull (KG) Rating 180
360
900 Speed
(M/min)
Steady
10 Short Runs
9 Snatch
5 Part Number : CF1900
20
Current (Amps) Volts DC
74
12
95
12
12
W i n d l a s s - James Nilsson Docking and Mooring Capstans
James Nilsson Docking and Mooring Capstan
CD1400
Seawinch CD1400 Dooking and Mooring Capstan
For low speed, controlled hauling when docking or mooring.
Powerful 600 watt motor specifically designed for quick anchor and pot hauling
recovery.
CD1400 Performance
“Steady” pull indicates typical run under load up to 20 minutes.
The “Snatch” pull is a maximum momentary pull the winch is capable of.
Pull (KG) Rating 130
300
600 Speed
(M/min)
Steady
7 Short Runs
6 Snatch
- Current (Amps) Volts DC
36
12
50
12
12
Part Number : CD1400
James Nilsson Docking and Mooring Capstan
CD2400
Seawinch CD2400 Dooking and Mooring Capstan
For low speed, controlled hauling when docking or mooring.
Powerful 1000 watt motor specifically designed for quick anchor and pot hauling
recovery.
CD2400 Performance
“Steady” pull indicates typical run under load up to 20 minutes.
The “Snatch” pull is a maximum momentary pull the winch is capable of.
Pull (KG) Rating 235
475
1090 Speed
(M/min)
Steady
9 Short Runs
7.5 Snatch
- Current (Amps) Volts DC
72
12
95
12
12
Part Number : CD2400
21
W i n d l a s s - Stress Free Drum Winches
Stress Free Mini - 500W
Ideal boat winch for shallow or narrow anchor wells.
An actuator pushes the drum into free fall allowing the anchor to spool
off the drum and set quickly.
Two models available - N.G .Free Fall and Standard.
Suitable for boats from 4 – 6 metres.
The motor can be mounted at 30, 45 and 90º to suit the configuration of
the anchor well.
Constructed from 316 marine grade stainless steel.
Maximum lifting capacity 195 kilos (when the drum diameter is small)
Holding capacity at anchor is 1800 kilos
Single person operation is achieved with the inclusion of a dual
direction solenoid, circuit breaker and up/down toggle switch.
Compact, fully sealed gearbox and powerful Quick permanent magnet
motor.
Drum Capacity:
We recommend a maximum of:
- 70m of 8mm nylon braid spliced onto 6m of 6mm short link chain
- Or 75m 6mm double braid eye spiced to 5m of 8mm nylon and 6m
6mm short link chain.
Above: Stress Free Mini Free Fall
Drum Winch
Part Numbers :
SFNGMINI - Stress Free Mini Free Fall
SFMINI - Stress Free Mini (Standard Model - No Free Fall)
Stress Free Mini Drum Winch
(Standard Model - No Free Fall)
Stress Free Midi - 1400W
Ideal boat winch for shallow or narrow anchor wells.
An actuator pushes the drum into free fall allowing the anchor to spool
off the drum and set quickly.
Suitable for boats from 6 – 7 metres.
Two models available - N.G .Free Fall and Standard.
The motor can be mounted at 30, 45 and 90º to suit the configuration of
the anchor well.
Constructed from 316 marine grade stainless steel.
Maximum lifting capacity 250 kilos (when the drum diameter is small)
Holding capacity at anchor is 1800 kilos
Single person operation is achieved with the inclusion of a dual
direction solenoid, circuit breaker and up/down toggle switch.
Compact, fully sealed gearbox and powerful permanent magnet motor.
Drum Capacity:
We recommend a maximum of:
- 65 metres of 10mm nylon plus 8 metres of 8mm chain
- Or 90 metres of 8mm nylon plus 8 metres of 8mm chain
- Or 160 metres of 6mm double braid eye spliced to 5 metres of 8mm
nylon and 8 metres of 8mm short link chain.
Part Numbers :
SFNGMIDI - Stress Free Midi Free Fall
SFMIDI - Stress Free Midi (Standard Model - No Free Fall)
22
Above: Stress Free Midi Free Fall
Drum Winch
Stress Free Midi Drum Winch
(Standard Model - No Free Fall)
W i n d l a s s - Stress Free Drum Winches
Stress Free Maxi - 1400W
Ideal boat winch for shallow or narrow anchor wells.
An actuator pushes the drum into free fall allowing the anchor to spool
off the drum and set quickly.
Suitable for boats from 7 metres plus.
Two models available - N.G .Free Fall and Standard.
The motor can be mounted at 30, 45 and 90º to suit the configuration of
the anchor well.
Constructed from 316 marine grade stainless steel.
Maximum lifting capacity 275 kilos (when the drum diameter is small)
Holding capacity at anchor is 3600 kilos
Single person operation is achieved with the inclusion of a dual
direction solenoid, circuit breaker and up/down toggle switch.
Compact, fully sealed gearbox and powerful permanent magnet motor.
Drum Capacity:
We recommend a maximum of:
- 85 metres of 10mm nylon plus 8 metres of 8mm chain
- Or 100 metres of 8mm double braid eye spliced to 5 metres of 10mm
nylon and 8 metres of 8mm short link chain.
Above: Stress Free Maxi Free Fall
Drum Winch
Part Numbers :
SFNGMAXI - Stress Free Maxi Free Fall
SFMAXI - Stress Free Maxi (Standard Model - No Free Fall)
Stress Free Maxi Drum Winch
(Standard Model - No Free Fall)
Stress Free Mighty - 1700W
Ideal boat winch for shallow or narrow anchor wells.
An actuator pushes the drum into free fall allowing the anchor to spool
off the drum and set quickly.
Suitable for boats from 10 metres plus.
Two models available - N.G .Free Fall and Standard.
The motor can be mounted at 30, 45 and 90º to suit the configuration of
the anchor well.
Constructed from 316 marine grade stainless steel.
Maximum lifting capacity 350 kilos (when the drum diameter is small)
Holding capacity at anchor is 3600 kilos
Single person operation is achieved with the inclusion of a dual
direction solenoid, circuit breaker and up/down toggle switch.
Compact, fully sealed gearbox and powerful permanent magnet motor.
Drum Capacity:
We recommend a maximum of:
- 170 metres of 8mm nylon plus 8 meters of 8mm shortlink chain
- Or 130 metres of 10mm nylon plus 8 meters of 8mm shortlink chain
- Or 100 metres of 12mm nylon plus 8 meters of 8mm shortlink chain.
Part Numbers :
SFNGMIGHTY - Stress Free Mighty Free Fall
SFMIGHTY - Stress Free Mighty (Standard Model - No Free Fall)
Above: Stress Free Mighty Free Fall
Drum Winch
Stress Free Mighty Drum Winch
(Standard Model - No Free Fall)
23
W i n d l a s s - Drum Winches
MaXtek Drum Winch
Compact, 12 volt anchor-well mounted drum style anchor winch.
Ideal boat winch for shallow or narrow anchor wells.
The drum, shafts and bearings on these winches, are all
manufactured from 316 grade stainless steel.
Single person operation is achieved with the inclusion of a dual
direction solenoid and remote mounted foot and up/down toggle
switch.
Compact, fully sealed gearbox and powerful permanent magnet
motor.
Drum Capacity:
We recommend a maximum of:
- 80m of 8mm nylon braid spliced onto 6m of 6mm shortlink chain
- Or 75m 8mm nylon braid spiced on to 10m 6mm shortlink chain
Retrieval rates :
Line Speed varies depending on amount of rope wound onto the
drum.
By example - 25m coiled on the drum and 50m of rope chain warp
unwound it will take 2mins and 20sec to fully retrieve.
Part Numbers :
MTK600 - (600 Watt)
MTK900 - (900 Watt)
Wireless Controller & Remote
Up / Down Switch - with Isolator
4 Channel Wireless Controller and Pocket size Remote. Holder
included.Control your winch and bow thrusters remotely from
anywhere on the boat.
Splashproof Windlass switch for all windlasses
12 or 24 Volt
Docking becomes even easier. Bring the boat to the mooring lines by
operating the bow thruster when you are on the bow.
Controls:
Windlass - Up / Down
BowThruster - Port /
Starboard
Part Number : 91354
24
Pre-wired with fuse and safety
switch.
Seperate sealed isolating switch
prevents accidental deployment of
windlass.
Dimensions: 90mm x 57mm
Part Number : 90801
W i n d l a s s - Switch Gear
Up / Down Toggle Switch
Windlass control switch for all windlasses 12 or 24 Volt.
Mirror finish Stainless Steel front
plate
Dimensions: 70mm x 43mm
Part Number : 90800
Universal Foot Switch for Windlass
Up & Down
Windlass foot switch for
all windlasses.
Suitable for both 12 and 24
Volt applications.
To be used in conjunction
with a heavy duty solenoid.
Available Black or White
Part Numbers :
90900W (white)
90900B (black)
Deck Foot Switch
For connecting directly to capstan for uni-directional use.
Heavy duty switch with
cover.
Rated at 150 amps
continuous.
Dimensions: 100mm with
a 64mm mounting hole
Part Number : 10098
Circuit Breakers - Switchable
Circuit breaker sizes from 60 Amp
to 175 Amp
Waterproof, Vaporproof, Manual
switchable, Surface Mount,
Manual Reset.
Part Numbers :
60A
90060
60A
90060-BP (Blister Packed)
80A
90080
100A 90100
135A 90135
150A 185150F
175A 90175
Heavy Duty Solenoid - 3 Wire Motors
Heavy Duty Solenoid - 2 Wire Motors
Rated for motors:
12V DC 500-1500 Watt
24V DC 500-1500 Watt
Rated for motors:
12V DC 500-1500 Watt
24V DC 1500-3000 Watt
~ Quality original parts
~ Designed for motors with 3
wires only
~ Quality original parts
~ Designed for motors with
two wires only
Part Numbers :
90501 - 12 Volt
90502 - 24 Volt
Part Numbers :
90503 - 12 Volt
90504 - 24 Volt
25
A n c h o r i n g - Bow Rollers
CAN Whale Self Launching Bow Roller
Self Launching Bow Roller - 950
A well engineered high quality bow roller from CAN. Manufactured
in Europe the CAN Whale is designed for easy mounting on most
boats and takes anchors up to 30kgs. Made in 316 stainless steel
with a low profile design. Hinged with an inner roller (dual rollers) for
self launching operation.
High quality bow roller designed universally for easy mounting
on most bows.
Made in 316 stainless steel with a low profile design.
Hinged with an inner roller (dual rollers) for self launching
operation.
Length: 695 mm x Width: 90mm
Thickness: 5mm
Length: 940 mm x Width: 100mm
Part Number : MB7204
Part Number : 90105AM
Self Launching Bow Roller - 750
Self Launching Bow Roller - 580
High quality bow roller designed universally for easy mounting
on most bows.
Made in 316 stainless steel with a low profile design.
Hinged with an inner roller (dual rollers) for self launching
operation.
High quality bow roller designed universally for easy mounting
on most bows.
Made in 316 stainless steel with a low profile design.
Hinged with an inner roller (dual rollers) for self launching
operation.
Length: 740 mm x Width: 90mm
Length: 585 mm x Width: 80 mm
Part Number : 90104AM
Part Number : 90103AM
Self Launching Bow Roller - 415
Self Launching Bow Roller - 400
High quality bow roller designed universally for easy mounting
on most bows.
Made in 316 stainless steel with a low profile design.
Hinged with an inner roller (dual rollers) for self launching
operation.
High quality bow roller designed universally for easy mounting
on most bows.
Made in 316 stainless steel with a low profile design.
Hinged with an inner roller (dual rollers) for self launching
operation.
Length: 415 mm x Width: 78 mm
Length: 400 mm x Width: 77 mm
Part Number : 90102AM
Part Number : 90101AM
26
A n c h o r i n g - Bow Rollers
Hinged Bow Roller
Bow Roller with guides
High quality hinged bow roller designed universally for easy
mounting on most bows.
Made in 316 Inox stainless steel with a low profile design.
316 Stainless Steel
Overall Width: 162mm
Roller Size:
55mm wide x 74mm dia
Length: 328 mm x Width: 70 mm
Part Number : 70634
Part Number : N08
Bow Roller
Hinged Bow Roller with Yoke
High quality hinged bow roller designed universally for easy
mounting on most bows. Made in 304 Inox stainless steel with
a low profile design. Large securing hoops provide clearance
for anchors with thick shanks.
Length: 355mm x
Channel Width: 50mm
Yoke Height: 127mm &
57mm
Mounting Plate 124mm
x 55mm
316 Stainless Steel
Overall Width: 58mm
Roller Size:
48mm wide x 50mm dia
Part Number : N07
Extended Bow Roller
316 Stainless Steel
Overall Width: 70mm
170mm long x 64mm wide
x 66mm high
Part Number : 90110
Part Number : 90900
Bow Roller Hinged for Self Launch
Stainless Steel
Two sizes available
Part Numbers :
56029-01
Mounting: 95 X 60mm
Bow Roller Guide - 195mm
Roller bracket width: 195mm
Overall width (including bolt and nut): 208mm
Part Number : NS1232
56029-02
Mounting: 125 X 60mm
Bow Roller - Single Roller
Stainless Steel
Two sizes available
Part Numbers :
56030-01
Mounting: 95 X 58mm
Bow Roller Guide - 150mm
Roller bracket width: 150mm
Overall width (including bolt and nut): 195mm
Part Number : NS1232S
56030-02
Mounting: 125 X 58mm
27
A n c h o r i n g - Bow Rollers
Stoltz Rollers
Insist on Stoltz Rollers on your boat trailer! Don’t put up with ugly marks on the hull of your boat.
Stoltz Boat Trailer Rollers and Bow Stops are the highest quality poly rollers on the market. MADE IN THE USA and manufactured for
long lasting performance and to protect your boat and keep the hull looking new! Stoltz Boat Trailer Rollers use High Quality Materials in
production to prevent discoloration, weather cracking, and marking up your boat hull. Stoltz will outlast any other roller.
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion resistance
* Extremely cut resistant
* Made in the USA
Anchor Roller RP444
Anchor Roller RP30
100mm width x
80mm diameter
1/2 inch shaft
75mm width x
74mm diameter
1/2 inch shaft
Made of durable
orange polyurethane
Made of durable
orange polyurethane
Part Number : 11021
Part Number : 11020
3” Bow Roller - Black Rubber
3” Bow Roller - Yellow Poly Vinyl
77mm width x
75mm diameter
75mm width x
75mm diameter
1/2 inch shaft
Part Number : N21
Part Number : N32
Euroglide 2” Bow Roller Red
4” Bow Roller - Yellow Poly Vinyl
High Strength 100% Polyurethane
No bushes required, self
lubricating.
100mm width x
95mm diameter
1/2 inch shaft
50mm width x
50mm diameter
1/2 inch shaft
Part Number : N30
Part Number : N12
Euroglide 3” Bow Roller Red
Roller - Black Polypropylene
High Strength 100% Polyurethane
No bushes required, self lubricating.
42mm width x
64mm diameter
71mm width x
70mm diameter
5/8 inch shaft
Part Number : 11907
Part Number : N13
28
A n c h o r i n g - Chain & Rope
Rope Cutter and Sealer
New Zealand Made
Model 3080RC rope cutter and sealer is fast and efficient.
The large blade area - cuts up to 100mm wide.
Cuts and seals most synthetic materials. Nylon, rubber, fabric, etc.
Webbing, cordage, ropes and tapes.
CMP Anchor Chain - DIN766
Part Number : 3080
CMP Short link Galvanised Chain DIN766
DIN766 chain uses a low carbon steel chain specifically
designed for anchoring applications. Hot dip galvanised short
link chain, calibrated to latest DIN766 standard.
Each link is individually calibrated
Part Numbers :
0556 - 6mm Short link Galvanised Chain DIN766
0557 - 7mm Short link Galvanised Chain DIN766
0558 - 8mm Short link Galvanised Chain DIN766
0560 - 10 Short link Galvanised Chain DIN766
Polypropylene Rope Packs
3 Strand Polypropylene Rope with a
thimble spliced on one end.
Note: Not to be used with a
windlass.
Part Numbers :
0106 = Rope Pack 8mm x 50mm
0107 = Rope Pack 8mm x 70mm
0108 = Rope Pack 10mm x 50mm
0109 = Rope Pack 10mm x 70mm
0111 = Rope Pack 12mm x 70mm
Dyneema Polyester covered Drum
Winch Rope
High performance Dyneema SK75 HMPE core and 100% high
tenacity polyester cover.
High performance rope, high strength rope. Ideal for drum
winch use due to its
small diameter and high
strength.
Construction: Double Braid
Cover material: High
Tenacity Polyester
Break Load: 1400kg
Diameter: 6mm
Part Number : DYN6MM
MaXtek Rope / Chain Packs
New MaXtek high quality 8 Plait Braid super soft space saving rope/CMP chain
combinations.
Easy and convenient for you to get for your windlass and in 3 popular combinations.
The inner core is special designed to keep the rope round and better grip to avoid
slippage in gypsy.
Made with nylon rope, ready to use. Spliced with CMP Din 766 chain.
We can also create customised rope and chain packs to suite any application.
Please contact us for any enquires on our custom rope/ chain packages.
Part Numbers :
RC061012050 - Rope/Chain Package Chain (10m x 6mm) + Rope (50m x 12mm, 8 plait)
RC062012050 - Rope/Chain Package Chain (20m x 6mm) + Rope (50m x 12mm, 8 plait)
RC062012070 - Rope/Chain Package Chain (20m x 6mm) + Rope (70m x 12mm, 8 plait)
RC071012055 - Rope/Chain Package Chain (10m x 7mm) + Rope (55m x 12mm, 8 plait)
RC071512070 - Rope/Chain Package Chain (15m x 7mm) + Rope (70m x 12mm, 8 plait)
RC072012100 - Rope/Chain Package Chain (20m x 7mm) + Rope (100m x 12mm, 8 plait)
29
A n c h o r i n g - Anchors & Shackles
Nylon Thimbles
Bow Shackles
Italian Made
Made of Galvanised Steel
Size refers to rope diameter
Part Numbers :
0655 - 5mm
0656 - 6mm
0658 - 8mm
0660 - 10mm
0663 - 12mm 0666 - 16mm Part Numbers :
0954N - 4mm
0955N - 5mm
0956N - 6mm
0958N - 8mm
0960N - 10mm
0962N - 12mm 0964N - 14mm 0966N - 16mm 0968N - 18mm
0970N - 20mm
0972N - 22mm
0974N - 24mm
Chain Joining Links
Part Numbers :
0557LINK - for 1/4” / 7mm DIN766
Chain
0558LINK - for 5/16” / 8mm
DIN766 Chain - Grade L
Part Numbers :
0680 - 8mm
0681 - 10mm
0682 - 12mm
Danforth Anchors.
Popular low cost anchors for use on dinghys and small vessels.
The shank is made of high strength steel and the steel flukes are
strong and wide for increased setting power.
Moveable shank allows for easy retrieval by driving over the anchor.
Galvanised.
DF3.0 - 3.0kg
DF4.0 - 4.0kg
DF6.0 - 6.0kg
Folding Grapnel Anchors.
Popular anchors for use on dinghys, nets and PWCs.
No sharp points when packed awayand made of Galvanised steel.
30
Blister Packed
Part Numbers :
0750 - 6mm
0751 - 10mm
0752 - 5mm Long
0753 - 6mm Long
0754 - 10mm Long
Part Numbers :
0755 - 5mm
0756 - 6mm
0758 - 8mm
0760 - 10mm
0763 - 12mm
0764 - 14mm
0766 - 16mm 0772 - 22mm
0770 - 20mm
0775 - 24mm
Counter-sunk slotted shank
Made of Galvanised Steel
Part Numbers :
0040 - 0.7 kg
0041 - 1.5 kg
0042 - 2.5 kg
0043 - 3.2 kg
0044 - 4 kg
MaXtek SS Dee Shackles
Dee Shackles
Carver Shackles
Part Numbers :
DF1.5 - 1.5kg
DF2.0 - 2.0kg
DF2.5 - 2.5kg
0670 - 20mm
0675 - 24mm
0045 - 6 kg
0046 - 8 kg
0047 - 10 kg
0048 - 15kg
A n c h o r i n g - Anchor Swivels & Straighteners
Kong Anchor Swivel - 12/13/14mm
Chain
The anchor slides perfectly through the ferrule without any
problems or damage to the sheaving. The swivel allows the
Anchor to straighten up automatically, so that it can correctly
position on board the fairlead.
This swivel is for Chain Size: 12-13-14mm
Breaking Strength along axis = 9500kg
Breaking strength along major access (side
pull) 3000kg
Safe Working Load = 3000kg
Made from 316 Stainless Steel
Part Number : 0165
Kong Anchor Swivel - 8/10/12mm
Chain
The anchor slides perfectly through the ferrule without any
problems or damage to the sheaving. The swivel allows the
Anchor to straighten up automatically, so that it can correctly
position on board the fairlead.
This swivel is for Chain Size: 8-10-12mm
Breaking Strength along axis = 5000kg
Breaking strength along major access (side
pull) 2000kg
Safe Working Load = 2000kg
Made from 316 Stainless Steel
Part Number : 0164
Anchor Swivels
Part Numbers :
0160
6-8mm Chain
(Suits 8kg - 15kg Anchors)
0161
10-12mm Chain
(Suits 15kg - 30kg Anchors)
0160-BP 6-8mm Chain (Blister
Packed)
0162
12-14mm Chain
Anchor Straightener
Designed to twist the anchor and orientate it so that it loads smoothly
into the fairlead. Avoids damage and mechanical stress to the
windlass.
Works with chain from 6mm to
8mm and most anchors that would
use that size chain. Also acts as a
swivel. Available in Stainless or
Galvanised steel.
Part Number : ANSTRA068
Part Number : ANSTRA068SS
(Stainless Steel)
Hawse Pipe
Stainless Steel 316
165mm x 84mm
Part Number : 80002
Kong Anchor Swivel 6/7/8mm Chain
The anchor slides perfectly through the ferrule without any
problems or damage to the sheaving. The swivel allows the
Anchor to straighten up automatically, so
that it can correctly position on board the
fairlead.
This swivel is for Chain Size: 6-7-8mm
Breaking Strength along axis = 2500kg
Breaking strength along major access (side
pull) 850kg
Safe Working Load = 850kg
Made from 316 Stainless Steel
Part Number : 0163
Stainless Steel Chain Stopper
Can be added to any installation. SS Pin is removable so chain can be
inserted into the channel. Simply flip the stop over for free-flow; and
down to lock the chain in place.
Prevent damage to your windlass by taking the strain. Works with your
bow roller and ensures tension is removed off the windlass at anchor
by locking the chain.
Stainless Steel marine grade components
Suitable for up to 13mm Chain
*Added security at anchor/mooring
*Easy to operate
*Easy to install
Dimensions:
98 (Length) x 68 (Width) x 64
(Height)
Part Number : 91404
31
A n c h o r i n g / M o o r i n g - Accessories
Sea Anchors - Lalizas
Made of strong coated PVC with continuous
webbing inside, for added strength.
Part Numbers :
10071 - Sea Anchor #1 - to 4.5m (15’)
10072 - Sea Anchor #2 - to 6m (20’)
10073 - Sea Anchor #3 - to 7.5m (25’)
10074 - Sea Anchor #4- to 9m (30’)
10075 - Sea Anchor #5 - to 12m (40’)
Sea Anchors - Directions
Use:
A Sea anchor, also called a drogue, is an essential part of your boat’s safety equipment. They are used to slow down your boat or liferaft
when you are facing strong winds or heavy seas. Moreover they will ensure your boat turns so as to face into or away from the waves. A
sea anchor can also be used to keep your boat as stationary as possible and not be affected by the wind, very useful when you are fishing
or swimming in waters too deep to anchor. .
Instructions of use :
Made of strong-coated PVC, the drogue is open at both ends and includes lines that create two loops at the front and one loop at the end.
The sea anchor (drogue) is tied to the boat’s bow (B) with the use of a rope, which should be of at least five (5) times the boat’s length (A).
Tied to the bow of the boat, the rope is passed through the two loops of the drogue’s front lines, creating a tight knot (C).
The larger the size of your drogue (larger opening), the bigger its effectiveness will be.
In order to pull the drogue out of the water you should tie a second rope at the end loop of the drogue (D) - pulling this rope will allow the
drogue to be pulled out of from the water.
To warn and prevent other boats from running over the ropes of
your drogue, you may use a floating buoy (E) that may be tied to
the secondary rope. Drogues should never be used for permanent
anchorage.
32
A n c h o r i n g / M o o r i n g - Accessories
Sea Anchor Professional
Lalizas has designed the Professional Sea Anchor (Drogue)
especially for use on large boats and under harsh conditions. The fabric is
200D polyester coated on both sides with 0.45mm PVC.
Lalizas Professional Sea Anchors are immensely strong using 40mm, UV
resistant webbing, terminating on a 6mm x 60mm(dia) INOX connecting ring.
Lalizas drogues are supplied in a safety yellow colour, packaged in a handy,
tough stowage bag.
Part Numbers :
10240 No.1 - for up to 15m (49’) boats
10241 No.2 - for up to 18m (59’) boats
10242 No.3 - for up to 18m (69’) boats
Lifebuoy Drogue / Sea Anchor for Horseshoe
For attachment to lifebuoys to stabilise and slow the drift of a horseshoe lifebuoy.
Meets the Yachting NZ requirements
Part Number : 10070
Dock Wheel
Smooth rolling wheel offer substantial dock cushioning and feature moulded-in
valves to adjust the level of firmness.
Heavy duty hot-dipped galvanized hardware mounts securely to the dock.
302mm wheel use large 50mm diameter axle housing for maximum strength.
Part Number : 1072
33
A n c h o r i n g / M o o r i n g - Accessories
Mooring Dock Lines
Double braided with loop
Polyester, Black coloured
Part Numbers (dia x length):
90815 - 8mm x 4m
90818 - 10mm x 10m
90819 - 12mm x 6m
90820 - 12mm x 12m
90821 - 14mm x 7m
Stainless Mooring
Spring
316SS - 410mm (L)
Part Number : 99641
Rubber Mooring Line Spring
Manufactured from rubber this springer reduces the shock on the mooring lines and protects boat
and dock.
Increases the life of dock lines and reduces stress on cleats.
Highly elastic rubber buffers the boat from dock line shock loads.
Great protection against the stresses of wind and waves while docked.
Part Numbers :
14147-2 - Designed for 3/8” or 10-12mm Rope (435mm long)
14149-2 - Designed for 5/8” to 3/4” or 16-20mm Rope (560mm long)
Lalizas Race Mark Buoy
The Lalizas Race Mark Buoy has been designed especially to meet the demands of races. It features
one inflation/deflation valve and one large transparent pocket (69 x 58cm) that can be used for
advertising purposes. There are also 4 attachment points for the anchor line and in order to absorb the
pulling forces, the lalizas mark buoy is fitted with a special net.
Despite its size, when inflated (height 1.5m, diameter 0.9m), it is very easy to carry. It is made of UV
resistant PVC, in bright yellow colour for high visibility.
Part Number : 51030
Kiwi Klaw - Rope Gripper
Kayak Anchor Pack with Winder
Hand held v-cleat rope gripper.
Suitable for Kayaks, Canoes, Dinghy’s,
Jet Ski’s, Small Water Craft and
Boats.
Rope sizes 6-14 mm
Multiple uses: marine, forestry,
trucking, building, rigging, rescue.
The tension is applied to the rope
and its load in a direct straight line
from the users shoulder, down through the arm and wrist and onto
the load, enabling tension to be safely and evenly applied.
Part Number : KiwiKlaw
Complete anchoring set up with a
0.7kg grapnel anchor and rope/chain
pack. Made from Tough one piece
Buoyant Plastic
Rope/chain pack is made up of 50 metres of 4mm Rope & 2 metres
of 6mm Chain
Dimensions: 335mm long x 135mm wide x 15mm deep
Part Number : 50282
34
A n c h o r i n g / M o o r i n g - Fenders
Hercules Single Eyelet Fender
The Hercules fenders, made from resistant PVC, are ideal for the protection of your boat against
damages caused by contact with other boats or the dock.
Dimensions: 95mm (diameter) x 310mm (length)
Part Number : 50591
Hercules Round Single Eyelet Fenders - Red
These fenders are ideal for mooring, anchoring, and fishing marking in heavy seas.
Part Number : Diameter (mm) Length (mm)
51010 300385
51011400520
51013600780
Hercules Fenders - Double Eyelet
Lalizas Hercules fenders are manufactured from marine grade PVC and are ideal for the protection of
your boat against damage caused by other boats, docks and quays.
They are double eye models, in white with blue end caps.
Several Sizes available:
Part Number : Diameter (mm) 50592 130 50593 155 50594 155 50595 200 50596 200 50597 230 Length (mm)
390
520
580
560
620
810
Hercules Fenders - Double Eyelet
Hercules PLUS fenders are designed for heavy-duty use, and for use under harsh conditions. As with
all LALIZAS fenders, they are constructed by tough, abrasion resistant PVC.
The Hercules PLUS fenders have features that strongly reflect the high quality construction standards
set by LALIZAS.
The eye (rope hold) and body are moulded in one process, so that the eye cannot be ripped off the rest
of the body. Unlike other fenders in the market, the Hercules PLUS fenders have solid, reinforced eyes
on the outside and the inside for extra resistance. If you need heavy-duty fenders, then the LALIZAS
Hercules PLUS are the ideal for your vessel.
Dimensions: 300mm (diameter) x 1040mm (length)
Part Number : 50665
Hercules Fenders - Double Eyelet
The EasyStore Inflatable fenders are made from reinforced, abrasion resistant PVC material. They
are light, simple to use and when deflated can be stowed in small lockers. They can be quickly
inflated by using any standard or electric pump and easily mounted using the rope supplied. The
EasyStore Inflatable fenders are available in various sizes, and in light grey colour.
Part Numbers : Diameter (mm) Length (mm)
57318 420 1320
57319 6001500
35
Audio/Visual
38. Marine
Stereos
44. Speakers &
Covers
50. Marine
Televsions
MaXtek FM Stereo MP3/USB/ +
Bluetooth
MaXtek FM Stereo MP3/USB/ +
Aux In
Fusion Marine DVD Stereo MSAV700
Fusion Marine Stereo for Ipod
MS-IP700
Fusion Remote Control for 700
Series
Fusion Marine Media Device Dock
-700/200 Series
Fusion Marine DVD Stereo MSAV600
Fusion Marine Ipod Stereo MSIP600
Fusion Marine CD Stereo MSCD600
Fusion Remote Control for 600
Series
Fusion Marine Dock for Ipod 600/500 Series
Fusion MS-FR702 7”Marine 2-Way
Speakers
Fusion MS-FR602 6”Marine 2-Way
Speakers
Fusion MS-FR402 4”Marine 2-Way
Speakers
Sony XSMP1620 6.5” Marine
2-Way Speakers
Sony XSMP1610 6.5” Marine Dual
Cone Speakers
Lalizas Sea Sound - Two-way
Speakers
DNA 4 Way 6 x 9 inch Marine
Wakeboard Speakers
DNA 3 Way Marine Boxed
Speakers
Sea Sound - 3 way Speaker Set
Mini Extension Speaker
Sony Waterproof Car Stereo Cover
Spray Proof Headunit Cover
Stereo Cover
SeaWorthy Marine Stereo Cover/
Enclosure
Fully Enclosed Marine Stereo Case
RSE LED TV with Sky Card Reader
and DVD (24”or 19”)
Fusion Marine 22” LED TV with
DVD
43. Fusion Marine
Amplifiers
Fusion Marine 5 Channel Marine
Amplifier
Fusion Marine Zone Amplifier
36
51. Satellite
Receivers
Mini HD Box Satellite Receiver
Micro Satellite Receiver for
Freeview
RSE Lockable Swing Arm Bracket
52. Satellite
Antennas
Ocean 037M Satellite TV Antenna
Ocean 032M Satellite TV Antenna
Winegard DS-5 - Crank-Up
Satellite TV Antenna
M a r i n e A u d i o / V i s u a l - MaXtek Marine Stereos
maXtek FM Stereo MP3/USB/ + Bluetooth
This compact stereo receiver can be mounted anywhere there is water including
boats, jetskis, spa pools and outdoor patio barbeque settings.
It’s small circular size makes installation a breeze and will fit into a standard outboard
tachometer opening. A solid aluminium chassis, as well as IP-66 and ASTM 117 salt
fog ratings make it durable.
*FM Radio
*USB Input
*All Weather IP66 Faceplate
*UV Stable
*Fits on driver’s console within a Tachometer
Opening
*4 x 40 watts output
*Solid aluminium waterproof chassis
*Auxiliary Input
*Bluetooth connectivity
Bluetooth connectivity allows you to play your songs wireless from your Smartphone
or iPod.
Ideal for smaller fishing boats, cuddy cabins and jetskis. The MTK020 is also perfect
for ATVs, motorcycles, golfcarts and RVs.
Part Number : MTK0020
maXtek FM Stereo MP3/USB/ + AUX In
This compact stereo receiver can be mounted anywhere there is water including
boats, jetskis, spa pools and outdoor patio barbeque settings.
Its small circular size makes installation a breeze and will fit into a standard outboard
tachometer opening. A solid aluminium chassis, as well as IP-66 and ASTM 117 salt
fog ratings make it durable.
76.2mm
41.2mm
*FM Radio
*USB Input
*All Weather IP66 Faceplate
*UV Stable
*Fits within a standard engine Tachometer cut-out
*4 x 40 watts output
*Solid aluminium waterproof chassis
*Auxiliary Input
Ideal for smaller fishing boats, cuddy cabins and jetskis. The MTK012 is also perfect for
ATVs, motorcycles, golfcarts and RVs.
Part Number : MTK0012
38
89mm
M a r i n e A u d i o / V i s u a l - Fusion Marine Stereos
Fusion Marine DVD Stereo MS-AV700
The 700 Series True Marine Entertainment System is the culmination of FUSION’s
engineering and design brilliance, resulting in a product with superior sound
quality, controls and features never seen before.
Fusion’s new top of the line model features a DVD player for watching movies
while out on the boat.
Auxiliary in: yes
Display: 2.7” colour TFT LCD
Line out: 4 x stereo, 4 x subwoofer
Media: AM/FM tuner, VHF receiver, DVD / CD player
Power: class-d 70 watts x 4 (max)
NMEA 2000 certified - connect to an existing NMEA network for communication with fusion-link devices and fusion nmea 2000
certified wired remote controls.
Ethernet ready - advanced wireless control is available with the addition of an all-in-one-DHCP wireless ethernet router via IPad,
IPhone or android ‘app’
Connect the optional MS-DKIPUSB Dock for USB, iPod or iPhone music playback.
Part Number : MS-AV700
Fusion Marine Stereo for Ipod MS-IP700
Complete iPod integration & control is provided via a replication of the iPod menu
on the stereo display, allowing simple & easy navigation.
Auxiliary in: yes
Display: 2.7” colour TFT LCD
Line out: 4 x stereo, 4 x subwoofer
Media: AM/FM tuner, VHF receiver, internal IPod/IPhone/USB dock
Power: class-d 70 watts x 4 (max)
NMEA 2000 certified - connect to an existing nmea network for communication
with fusion-link devices and fusion NMEA 2000 certified wired remote controls.
Ethernet ready - advanced wireless control is available with the addition of an all-in-one-DHCP wireless
ethernet router via IPad, IPhone or android ‘app’
Connect the optional MS-DKIPUSB Dock for an xtra USB, IPod or IPhone music playback.
Part Number : MS-IP700
39
M a r i n e A u d i o / V i s u a l - Fusion Marine Stereos
Fusion Remote Control for 700 Series
Manage the entertainment experience directly from the individual listening zone of
your vessel with the addition of the MS-NRX200. Most stereo functions are replicated
by the remote, with full control of the volume, balance and subwoofer level at your
finger tips.
Rated IPx7 Waterproof
FUNCTIONS AS A NMEA 2000® REPEATER
The MS-NRX200 wired remote can communicate with other NMEA 2000 devices connected to the same NMEA 2000 network,
to display information like depth, speed and wind direction. The NRX200 remote control can be configured to display NMEA2000
network data, the following options are available:
•Wind Direction
•Wind Speed
•Depth
•Speed over Ground
•Speed through Water
•Heading
•Position
•Water Temperature
•Atmospheric Pressure
•ETA
Part Number : NS-NRX200
Fusion Marine Media Device Dock - 700/200 Series
*For 700 Series and 200 Series only*
Connect FUSION’s Marine Portable Media Device Dock to your Fusion Marine Stereo
and gain all the benefits of FUSION’s unique iPod connectivity, iPod video playback and
two USB ports.
An iPod and USB flash can be inserted into the waterproof dock, providing full control
and integration while charging. The iPod is securely protected from rough conditions and
the harsh marine elements via dedicated iPod sleeves fitted to the dock. The second USB port on the rear of the dock, enables the
connection of a further USB flash drive*.
Featuring composite video out which enables iPod/iPhone video playback on a compatible monitor or television.
Part Number : MS-DKIPUSB
40
M a r i n e A u d i o / V i s u a l - Fusion Marine Stereos
Fusion Marine DVD Stereo MS-AV600
Listen to your favourite CD, radio station or DVD. The MS-AV600 is the perfect
home theatre solution for entertaining on-board your vessel and comes complete
with IR remote to control the DVD menu system for added convenience.
Sources include - AM / FM / CD / DVD / AUX
Integrate iPod audio into the MS-AV600 system with the addition of the MS-IP15L2 serial cable, alternatively for secure water
resistant housing of your iPod away from the elements, the MS-IPDOCKG2 is recommended (sold separately).
Part Number : MS-AV600G
Fusion Marine IpodStereo MS-IP600
Featuring World First internal iPod docking technology. Your iPod actually sits inside
the Stereo, completely protected from the harsh marine elements.
Most operations are controlled by the large rotary encoder and the large easy
press buttons on the face. The unique FUSION user interface is simple to navigate,
scrolling through your iPod music library has never been easier.
Sources include - AM / FM / iPod / AUX
The entire chassis is 360 ° IPx5 Water Resistant
Part Number : MS-IP600G
Fusion Marine CD Stereo MS-CD600
Listen to your favourite CD, radio station.
Sources include - AM / FM / CD / AUX
Integrate iPod audio into the MS-CD600 system with the addition of the MS-IP15L2
serial cable, alternatively for secure water resistant housing of your iPod away from
the elements, the MS-IPDOCKG2 is recommended (sold separately).
The entire chassis is 360 ° IPx5 Water Resistant.
Part Number : MS-CD600G
41
M a r i n e A u d i o / V i s u a l - Fusion Marine Stereos
Fusion Remote Control for 600 Series
FUSION’s MS-WR600 Marine Wired Remote Control extends the capabilities of a 600
Series Stereo or the MS-RA200 Marine Stereo, by enabling local control of the audio
in each zone of your vessel.
Up to three remotes can be linked to a 600 Series Stereo, providing true system
flexibility.
Up to two remotes can be linked to an MS-RA200 Stereo.
•Complies with IPX5 Waterproof Standard
•White positive alphanumeric LCD screen
•Plug & play - no external power connection required
•Zone control
•Rotary encoder
•Advanced user interface
•‘Positive feel’ rubber keypad
•Noise resistant CANBUS technology
•Mounting hardware included
Part Number : MS-WR600
Fusion Marine Dock for iPod - 600/500 Series
*For 500 Series and 600 Series only*
The dock connects directly to your Marine Stereo, allowing full control and integration
of your iPod through the Stereo. The bulkhead mount dock complies with IPX5
Waterproof Standards on the front of your unit, protecting your iPod from the harsh
marine environment while it charges.
Compatible with the following Marine Stereo’s:
Marine CD Stereo (MS-CD500)
Marine CD Stereo (MS-CD600)
Marine DVD Stereo (MS-AV600)
There are two installation options for the Marine Dock for iPod:
•A fully sealed bulkhead mount dock for instrument panel or exterior installation
•A wall mount dock for cabin or interior installation
Part Number : MS-IPDOCK2G
42
M a r i n e A u d i o / V i s u a l - Fusion Marine Amplifiers
Fusion Marine 5 Channel Marine Amplifier
The MS-DA51600 is FUSION’s first 5 Channel Class-D Hi-Fi Marine
amplifier; the key benefit of a Class-D amplifier is low battery drain with a
high output, making this the perfect amplifier for the marine environment.
The MS-DA51600 has conformal coated PCB’s for maximum product life
and performance plus the amplifier chassis acts as a heat sink; reducing
component core temperature and increasing efficiency.
The stainless steel cover hides away the amplifier set up controls and
connections for a discrete, attractive look. Outputs include Subwoofer plus
four speaker channels for sound front and rear. RCA line-level inputs are
included, for easy connection to new or existing systems.
Mounting Dimensions:
Depth: 210mm
Height: 50mm
Length: 300mm
Product Specifications:
Frequency Response: 10Hz - 50kHz
Peak Power: 1600 Watts
Rated Power: 80 Watts RMS x 4 + 250W RMS x 1 @ 4 Ohm 1% THD+N
Rated Power: 130 Watts RMS x 4 + 330W RMS x 1 @ 2 Ohm 1% THD+N
Rated Power: 250 Watts RMS x 2 @ 4 Ohm Bridged 1% THD+N + 250W RMS x 1 @ 4 Ohm
1% THD+N
Part Number : MS-DA51600
Fusion Marine Zone Amplifier
FUSION’s Marine Zone Amplifier is designed to support the multi-zone technology.
FUSION’s Marine Stereos have the capability to run up to four pairs of speakers.
You will also need to install a Marine Zone Amplifier if your sound system has
more than four pairs of speakers.
•2 Channel
•2 Ohm Stable
•Water resistant design
•Conformal coated PCB
•Audio detect selectable function – the amplifier turns on when audio is detected
and goes to sleep / low power mode when audio is not present
•Selectable high pass/ full range setting
•Variable high pass filter
Mounting Dimensions
Depth 78mm
Height 51mm
Length 128mm
Product Specifications
Operating Range 10 -16 volts DC
Peak Power D-Class 70 Watts
Rated Power 20 Watts RMS @ 4 ohms per channel: 33 Watts RMS @ 2 ohms per channel
Part Number : MS-AM702
43
M a r i n e A u d i o / V i s u a l - Marine Speakers
Fusion MS-FR702 7” Marine 2-Way Speakers
Complies with ASTM Standards for UV Stability and Salt/Fog
Resistance
Complies with IP65 Water Resistant and Dust Standards
Sold complete with two grille options in each box, Ice White and
Midnight Black.
Product Specifications
Efficiency (1W/1M): 91dB
Frequency Response: 60 – 22kHz
Impedance: 4 Ohm
Peak Power (Watts): 260
Part Number : MS-FR702
Fusion MS-FR602 6” Marine 2-Way Speakers
Complies with ASTM Standards for UV Stability and Salt/Fog
Resistance
Complies with IP65 Water Resistant and Dust Standards
Sold complete with two grille options in each box, Ice White and
Midnight Black.
Product Specifications
Efficiency (1W/1M): 90dB
Frequency Response: 70 – 22kHz
Impedance: 4 Ohm
Peak Power (Watts): 200
Part Number : MS-FR602
Fusion MS-FR402 4” Marine 2-Way Speakers
Complies with ASTM Standards for UV Stability and Salt/Fog
Resistance
Complies with IP65 Water Resistant and Dust Standards
Available only in Ice White.
Product Specifications
Efficiency (1W/1M): 87dB
Frequency Response: 90 – 22kHz
Impedance: 4 Ohm
Peak Power (Watts): 120
Part Number : MS-FR402
44
M a r i n e A u d i o / V i s u a l - Marine Speakers
Sony XSMP1621 6.5” Marine 2-Way Speakers
16cm Marine 2-Way Coaxial Speaker
* Peak Power: 160W
* Rated Input Power: 45W
* Frequency Response: 35Hz – 26kHz
* Sensitivity: 91dB/W/m
* Water-Resistant Marine Design
* UV Resistant
Part Number : SONY-1620-W
Sony XSMP1611 6.5” Marine Dual
Cone Speakers
16cm Marine Dual Cone Speakers
* Peak Power: 140W
* Rated Input Power: 40W
* Frequency Response: 40Hz – 20kHz
* Sensitivity: 90dB/W/m
* Water-Resistant Marine Design
* UV Resistant
Part Number : SONY-1610-W
Lalizas Sea Sound - Two-way Speakers
5 1/4’’ 2 Way Speaker Set 80W
6 1/2’’ 2 Way Speaker Set 100W
- Impedance: 4 Ohm
- Sensitivity 88db
- Frequency response: 80-18000 Hz
- Peak Power 80W (per pair)
- RMS Power: 70W (per pair)
- Material: UV-stabilised ABS plastic
- Impedance: 4 Ohm
- Sensitivity 90db
- Frequency response: 60-18000 Hz
- Max: 100W (per pair) - RMS Power: 80W (per pair)
- Material: UV-stabilised ABS plastic
Mounting dimensions:
Depth: 75mm, hole dia: 110mm
Mounting dimensions
Depth: 88mm, hole dia: 130mm
Part Numbers :
31302 - 5 1/4’’ 2 Way Speaker Set 80W
31303 - 6 1/2’’ 2 Way Speaker Set 100W
45
M a r i n e A u d i o / V i s u a l - Marine Boxed Speakers
DNA 4 Way 6 x 9 inch Marine Wakeboard Speakers
High Performance 6x9 Speakers in a Water Resistant & In
High Impact UV Protected Plastic Case.
•Mount Accepts 2.0 inch To 3 inch Diameter pipe.
•300 Watts Peak / 100 Watts RMS.
•SPL: 1 watt/1 metre 95 db.
Part Numbers :
MWS694W (White)
MWS694B (Black)
DNA 3 Way Marine Boxed
Speakers
Compact 3 way boxed speakers supplied with both bracket mount and
flush mounts.
•35 Watts RMS / 70 Watts Max
•Frequency Response: 150Hz - 20Khz
•Sensitivity: 88dB 1M/1W
•Dimensions: 189mm (L) x 99mm (W) x 125mm (H)
•Heavy Duty ABS Plastic Enclosure With UV Protection
Part Numbers :
MSB335W (White)
MSB335B (Black)
Sea Sound - 3 way Speaker Set
•3 Way Speaker Set 180W
•Impedance: 4 Ohm
•Sensitivity: 92 db
•Frequency response: 80-20000Hz
•Peak Power: 180W (per pair)
•RMS Power: 60W (per pair)
•Material: Polypropylene cone
•Magnet: 5.4Oz
Part Number : 31304
Mini Extension Speaker
Great for adding an external speaker
to your VHF.
* 8 ohm / 4 watt
* Dust and Water resistant
* Small size: 80x70x45mm
* 1.5m cable
* 3.5mm plug
Part Number : 7362
46
Dimensions: 21cm (h) x 12cm (d) x 13.5cm (w)
M a r i n e A u d i o / V i s u a l - Marine Stereo Covers
Sony Waterproof Stereo Cover
Sony GMD-616 Stereo Cover
Keep your marine stereo protected from the elements with the
GMD-616 waterproof stereo cover. It features a weatherproof
front mask opening with an O-ring seal for reliability. Plus, this
stereo cover is compatible with most DIN-sized head units and is
constructed of a durable injection moulded polycarbonate frame.
Features:
Durable Injection Moulded Polycarbonate frame
Front mask opening type for easy operation
Weatherproofed with O-Ring Seal for Reliability
Compatible with all DIN-sized head units
Dimensions:
Mounting Dimensions: 111mm (h) x 241mm (w)
Part Number : SONY-GMD616
Spray Proof Headunit Cover
Spray proof headunit cover.
Fold down front with gasket for tight seal.
Designed to protect the front of a flush mounted stereo.
Part Number : SONY-23937
Stereo Cover
A small hatch specifically for covering your stereo headunit from
the elements
Stereo Cover 110mm X 235mm
Part Number : 4636W
SeaWorthy Marine Stereo Cover/Enclosure
The SeaWorthy Marine Stereo Cover/Enclosure installation system
simplifies the mounting of any stereo.
SEA SHROUD snaps into RTR5200 protecting the radio from water and
eliminating the need for a backstrap.
Includes SEA SHROUD and RTR5200 (radio not included).
•Simplify installation
•Keeps moisture out
•UV & weather protective door
Dimensions: 177W x 152D x 50H mm
The RTR5200 auto-opening door with flush mount features a Lexan
cover and removable trim ring. Fits shaftless radios.
Part Number : STEREOCOV
47
M a r i n e A u d i o / V i s u a l - Marine Stereo Enclosures
Fully Enclosed Marine Stereo Case
Fully Enclosed Salt Water & UV Tested Marine Case. Now you can mount your
stereo anywhere on your dashboard, under the cabin roof or under the consul.
Ideal For Applications In Environments Where Moisture, Dust & High UV Are
Present.
Features:
•Case manufactured from UV stabilised ABS plastic and fitted with a drop
down hinged door with o-ring seal & polycarbonate tinted perspex window
•Suits standard DIN sized unit Radio/Cassette/CD Players
•Designed for under dash or surface mount on a console. Gymbal adjusted
U-shape mounting bracket
•All hardware fittings are manufactured from rust proof stainless steel
Part Number : MAC001
48
M a r i n e A u d i o / V i s u a l - Television
RSE TV with Sky Card Reader and DVD
32”, 24” or 19” LED/LCD Satellite TV with HD Tuner with Freeview
built in and Sky card compatible
Designed by NZ Technicians for the NZ Environment
This is a dedicated 12V DVB-T (Terrestrial Freeview) and DVB-S2
(High Definition Satellite) Receiver for both Sky and Freeview TV, DVD
(side loading) and has a USB Port with full Media Centre capability,
external hard drive use and built in PVR (Personal Video Recording).
•Built in FM Transmitter allows you to send the audio wirelessly through the motorhome/caravan speakers or use our Wireless FM
Headphones.
•Built-in Multi Media Centre allowing you to play music, movies, pictures and read .txt files.
•Digital radio and built-in PVR (Personal Video Recording) direct to a USB Stick or hard drive.
•Wireless headphone capable.
•Comes with 240V adapter and 12V cigarette lighter adapter.
•In-built polarity protection.
•Full 1080i screen.
•Anti-shock and anti-vibration makes it ideal for the motorhome/caravan and marine environment.
•Very slim Design
•VGA, USB, P Audio, Mini AV, Mini YPbPr, HDMI, Earphone and Coax inputs
•Pay to view card capable (insert your Skycard)
•Just plug and play - all channels are pre-loaded
•24 month warranty.
Part Numbers :
TVDVD32 - 32” TV (Dimensions: 786W x 555H (on stand) 517H (without stand)
TVDVD24 - 24” TV (Dimensions: 582W x 404H (on stand) 369H (without stand)
TVDVD19 - 19” TV (Dimensions: 456W x 328H (on stand) 295H (without stand)
Fusion Marine 22” LED TV with DVD
The built in DVD player allows you and your family the ability to watch
your favourite movies and music videos. Use the stereo headphone
jack for privacy or connect your TV with the RCA pre-outs into your
FUSION head unit (600 or 200 Series) for an improved entertainment
experience.
•Conformal coated PCB For protection against corrosion
•Full HD (1920 x 1080) 1080p
•Included Full-Function Remote Control. Wall mounting bracket
•Media Built-in DVD/CD drive,. Built in DVB-T digital tuner. NTSC, PAL
TV tuner.
•Media Component and Composite video inputs. HDMI input. USB
connection. VGA port.
•Other Closed Caption Decoder. Parental Lock. Sleep Timer. Built in
speakers (4W x 2)
•Power Supply 110-240V AC, 12V DC 5 metre cable
•PVR functionality Record digital TV**
•Screen 16:9 wide screen
•Dimensions: 533.83 x 361.61 x 58 mm (W x H x D)
•Compatible file formats include .jpg, .jpeg, .gif, .mp3, .mpg, .vob, .avi, .mp4, .dat and .txt.
** High speed USB drive required. Recording time will vary depending on size of USB drive.
Part Number : MS-TV220LED
50
M a r i n e A u d i o / V i s u a l - Satellite Receivers
Mini HD Box Satellite Receiver
The smallest, most powerful high definition free to air satellite
receiver available on the market.
Can be used both horizontally or vertically. USB2 port to attach
USB hard drives etc. for updating firmware, channels lists and also
recording and pausing live TV.
Built in Infra Red sensor, allows the box to be hidden in a cupboard
and just point the remote at the remote sensor to change channels
and volume.
Takes P2 Sky Cards - HD Sky, includes TV 1, 2 and 3. First 16 channels
loaded are Freeview.
Laminated channel list supplied with operating tips.
Recording onto an external USB stick from the 7 day EPG guide system
Ideal for the motorhome, boat or caravan etc.
Features:
• Comes pre-loaded with all channels and services
• No tuning required
• Factory set for 10750 LNB
• Full instruction manual
• Fully upgradable via software
• Dimensions: 162W X 115D X 30H (mm)
• Weight: 200 gm.
• 12V or can be modified to 230V (please ask if required)
• Remote Control
Part Number : TVMINIHDIR
Micro Satellite Receiver for Freeview
The micro S1812 from Starview is so small you can install behind a television or away in a cabinet
so the end user does not see it. A great way of hiding cables and with the included remote eye
extension you can easily control the receiver from the remote control.
It is also powered by 12VDC so it’s great for boats, motor homes, caravans and camping. The
receiver comes with various mounting options and all cables and a 230VAC plug pack. Comes
pre-programed with the latest Freeview channels and with the Starview quick guide for easy use.
Features:
• Enjoy crystal clear satellite TV anywhere in New Zealand!
• Freeview channels preset
• Mounts behind TV, no messy cables
• Remote control
• 12V and 230V
• Dimensions of the receiver: only 65W x 75L x 25H (mm)
Part Number : FREEVIEW
RSE Lockable Swing Arm Bracket
New RSE Lockable Swing Arm Bracket made form Aluminium and Hi Tensile Steel. Pefectly
matched with the the RSE 19” and 24” HDTV’s.
*Swing Arm Wall Mount
*Max Weight: 7.5Kg
*Tilt Angle: 45 deg up, 45 deg down
*Swivel Angle: 60 degrees
Part Number : RSE2817
51
M a r i n e A u d i o / V i s u a l - Satellite Antennas
Ocean Series Satellite Atennas
A satellite dish used in conjunction with a Freeview / Sky receiver is the only reliable method of
watching TV in remote areas. Get perfect TV picture quality on your boat with an Ocean satellite
dish. Exclusive NZ importer and distributor of Ocean Satellite Antennas.
Ocean series of satellite antennas are fully tested in proven for New Zealand conditions. The
smallest and lightest Gyro Stabilized Satellite dishes in the World. State-of-the-art technology will
provide perfect Satellite TV signals on your boat while under way or at rest.
Ocean 037m Satellite TV Antenna
Ocean 032m Satellite TV Antenna
37cm Marine Sat TV Antenna
32cm Marine Sat TV Antenna
Enjoy Powerful Digital Satellite TV, where ever you go, when ever
you want.
25% smaller than the competition and weighs less than 4kg.
Model: O37m
Antenna Type: Parabola
Parabola Size: 370mm
Radome Size (Height x Diameter): 440mm x 430mm
Minimum EIRP: 50dBw
Antenna Gain: 31dBi
Stablized Type: 2-axis step motor
Elevation Range: 0º to 90º
Azimuth Range: Unlimited/450º
Compatible receiving region: Korea, Japan, China, Europe, USA,
Italy, New Zealand, Australia, South East Asia, Middle East.
Part Number : 037M
Enjoy Powerful Digital Satellite TV, where ever you go, when ever
you want.
Antenna Type: Parabola
Parabola Size: 320mm
Radome Size (Height x Diameter): 350mm x 360mm
Minimum EIRP: 51dBw
Antenna Gain: 27dBi
Stablized Type: 2-axis step motor
Elevation Range: 0º to 90º
Azimuth Range: Unlimited/450º
Compatible receiving region: Korea, Japan, China, Europe, USA,
Italy, New Zealand, Australia, South East Asia, Middle East.
Part Number : 032
Winegard DS-5 - Crank-up Satellite TV Antenna
The Winegard DS-5 Crank Up Satellite is the only EMC tested and C-tick approved Winegard in New Zealand.
This is a high quality and reliable, easy to install and economical crank up satellite.
Setup is simple and operation is even easier with the Winegard Digital Sensor.
Suitable for use on Caravans, Pop Tops and Motorhomes.
•LNB and LNB Holder supplied pre-fitted together
•Low profile non-rusting LNB
•2 Year Manufacturer’s Warranty on the LNB
•Comes with RG6 Satellite Cable
•Only Winegard has a Digital Sensor for the elevation readout, ensuring a quick, easy and no hassle set
up
•12V or 9V installation
• Winegard DS-5 sat antenna for motorhomes comes complete with LNB, LNB Holder and Strut Kit
Part Number : O31
52
53
BBQs
55. BBQs &
Smokers
Kuuma Profile BBQ
Kuuma Stow & Go Barbecue
Kiwi Sizzler BBQ with Window
Kiwi Sizzler Larger Smoker
Gourmet Fish Smoker
57. Gas Bottles &
Fittings
Marine grade Aluminium Alloy
Gas Tanks
LPG Regulator & Hose
Hose to connect High Pressure
BBQ to LPG Bottle
LPG Adaptor - POL to Companion
Propane fuel cartridge 465g
58. BBQ
Accessories
Rod Holder Mount for Stow &
Go BBQ
Rail Mount for Stow & Go BBQ
Boaties Fry Pan
Boaties Baking Pan
Smartspace Frypan
Barbeque Griddle / Hot plate
Food Tray for Stow & Go BBQ
54
B a r b e q u e s - BBQs & Smokers
Kuuma Profile BBQ
The California Grill, for good food and good times.
USA design
Stainless steel construction
150 sq inches of cooking surface.
Integral foldaway legs
Removable grease tray
Stay cool handle
9000 BTU
The name Kuuma translates into “HOT” - fitting for a
barbeque & water heater company. The creative design
team of the company are of Finnish nationality.
* Rod Holder and Rail mountings sold separately
Dimensions:
Width: 250mm X Length: 502mm (including gas fittings 616mm)
Height (body): 142mm (with legs folded out 168mm)
Height including handle: 172mm (with legs folded out 198mm)
Part Numbers :
83727H - Uses convenient high pressure “Coleman type” Canisters. These can be unscrewed in order to facilitate stowage. These are ideal where space and convenience is important. Gas canisters will last a typical season; around a dozen or so barbeques.
83727L - Regular gas bottle style. Connects to a regulated LPG bottle
Kuuma Stow & Go Barbecue
ORIGINAL, STILL THE BEST
YOU ASKED FOR IT, Kuuma DESIGNED IT ...
THE BEST COOKING MARINE BARBECUE EVER!
Foldaway legs, locking sides, stowaway handle your ideas - our
designs.
Has fold down legs (rail mount not included)
Great for sitting on your bait board or even taking into the beach.
Dimensions:
265mm(width) X 600mm (OA length including fittings) 320mm high
(to top of handle with legs down and top closed).
The cooking surface is about 480 X 260mm
Part Numbers :
83722H - Uses convenient high pressure “Coleman type” Canisters. These can be unscrewed in order to facilitate stowage. These are ideal where space and convenience is important. Gas canisters will last a typical
season; around a dozen or so barbeques.
83722L - Regular gas bottle style. Connects to a regulated LPG bottle
55
B a r b e q u e s - BBQs & Smokers
Kiwi Sizzler BBQ With Window
The Portable Kiwi Sizzler is a durable well designed marine grade
BBQ.
Perfect for the boat or outdoors, this BBQ is made of 316 marine
grade stainless steel and has cast iron hot plate/grill for all
applications.
A fully enclosed BBQ with viewing window you will never need to
worry about burning or over cooking.
A large 12,000BTU/HR Burner helps cover the plate with even heat
distribution to cook food evenly.
Features:
*Quality HD stainless steel
*Stainless steel construction
*Stainless steel Burner
*Clip Down Lid with comfortable handles
*Slide out fat drip-tray
*Cast Iron Cook plate
*Pizo Ignition system
*Low / High temperate control
*Gas regulator included
*Foldaway legs
Specifications:
Main body dimensions: 50L x 32W x 35H CM’S
Over all Lenght: 63cm (including control unit on end.)
Plate size: 46L x 28W 1/3 grill 2/3 hot plate
Burner power: input rating 12,000 BTU/HR stainless steel burner
Part Number : 83725
Kiwi Sizzler Large Smoker
Kiwi Sizzler Large Smoker
Made from High grade stainless steel and with easy LPG operation you can
smoke your weekend catch in one go!
It connects to a standard NZ LPG 9kg bottle with regulator and has variable air
flow vents to adjust cooking times and smoke build up.
A heat gauge shows when you are at the right temperature and the easily
adjustable gas element makes for quick prep time.
Hinged door with push & twist lock handle and comes with removable cast iron
smoke chip/water steam tray
Kiwi Sizzler Large Smoker Features:
*High grade stainless steel
*Easy LPG operation
*NZ LPG regulator with screw thread connection
*Variable air flow
*Heat guage
*Easily adjustable gas element
*Hinged door with push & twist lock handle
*Adjustable vents on top & sides
*Removable cast iron smoke chip/water steam tray
*Comes with regulator and hose
*Uses standard wood chips
*2 grab handles
Dimensions: 1080 x 505 x 425 cm
Part Number : SMOKERGUP
56
B a r b e q u e s - Smokers & Gas Bottles
Gourmet Fish Smoker
• Heavy duty stainless steel construction
• Large 18.5ltr cooking area
• Bakelite heat resistant handle
• Two tier cooking racks
• Size is 460 x 340 x 180mm
Part Number : SMOKER
Marine grade Aluminium Alloy Gas Tanks.
Fully weather resistant and impervious to salt. Ideal for gas cylinders on a boat or outside your home.
Corrosion resistant construction and material to ensure maximum life in the marine environment.
Patented one piece, one seam weld construction.
Our cylinders are made from special refined Al-Mg-Si alloy, and have many advantages over
steel cylinders.
* At the same volume, the mass of our cylinders are half that of steel
* Long working life
* Non rust boat gas cylinder
* Can be used without any anticorrosion coating
* Because of cleanliness and resistance of the alloy it
can be used for cooling gases
* The weld is on the most favourable part of the
pressurised cylinder so it is loaded less
* There is no spark-danger.
* Can be recycled
Approvals:
New Zealand & Australian Approved.
EN12-862/2000 Inspection Authority: TUV. Germany.
Part Numbers :
LPG2.2 (2.2 kg Capacity) LPG5
(5 kg Capacity)
LPG10 (10 kg Capacity) LPG15 (15 kg Capacity)
LPG20 (20 kg Capacity)
LPG23 (23 kg Capacity)
57
B a r b e q u e s - BBQ Fittings & Accessories
LPG Regulator & Hose
For use with Low Pressure BBQs
POL Regulator with 8mm (dia) Low Pressure Hose and 3/8 SAE Outlet.
For connecting “Low Pressure” Barbecues to POL cylinder.
Regulator: 2kg/hr. - 2.8 kpa.
Part Numbers : REG1000
REG600
(1000mm hose)
(600mm hose)
Hose to connect High Pressure BBQ
to LPG Bottle
1.5m Hose to connect High Pressure (Coleman type canister)
BBQs to an LPG Bottle.
Compatible with :
83727H
83722H
Part Number :
59823
Propane fuel cartridge
465g
For use with High Pressure BBQs.
Also suits various stoves and lanterns
by Coleman.
LPG Adaptor - POL to
Companion
Suits our 2.2Kg alloy gas bottles
90 deg Angle
Part Number : LPGPOL
Compatible with :
83727H
83722H
Part Number : PROPANE1
Rail Mount for Stow & Go BBQ
Sturdy Rail Mount
* Designed for use with
Stow Go BBQ
* Fits 7/8 to 1-1/4-inch round
or square rail
Part Number : 83635
58
Rod Holder Mount for
Stow & Go BBQ
Rod Holder Mount
To suit Stow & Go BBQ
Stainless Steel, 60 Degree Angle
Part Number : 83754
B a r b e q u e s - BBQ Accessories
Boaties Fry Pan
New Features
* Stainless Steel Base allows use on induction hobs
* Silicon Handle for a more comfortable grip
Frustrated trying to fit a round frypan on to a square stove?
The answer - Boaties Frypan
Pan Measurements 250 x 200mm the same approximate cooking
surface as a 255mm round fry pan
* Heavy gauge aluminium with stainless steel base gives an even
and stable heat transfer
* High Quality non-stick surface ensures a longer pan life
* Compact Ovenproof Handle easy to grip and high enough to clear a fiddle rail
Part Numbers :FC10
FC11
(Fry Pan)
(Lid)
Boaties Baking Pan
Now with one pan you can roast, braise and bake for the whole
crew!
* Designed for one-handed use making removal from the oven
easier
* Compact Detachable Handle is always cold when used and
stows away neatly with the pan
* Oven and Stove Top use
* Size 31 x 21 x 6cm - over 2 litres volume
* Heavy Guage Aluminium gives an even and stable heat transfer
* Double Coated non-stick surface ensures a long pan life
Part Number : FC12
Barbeque Griddle / Hot plate
Great for Cooking Eggs on your BBQ grill!
* Flat on one side and ribbed on the other side
* Teflon coated with “stay-cool” handles
Dimensions:
315mm x 210mm Overall
265mm x 200mm Cooking surface
~20mm thick plate
Part Number : 83751
59
B a r b e q u e s - BBQ Accessories
Smartspace Frypan
SmartSpace Frying Pan is a new concept in cookware
that fits on even the most compact stoves. Perfect for the
RV, boat or baches were space is essential. The non-stick
finish makes washing up effortless.
Cookware Features:
Stainless steel base suitable for gas, electric or induction
cooking
Durable 3mm aluminium walls
Teflon coated non stick interior (high grade)
Enamel baked exterior
Removable handle does not transfer heat
Dishwasher safe
Silicone mat; Place hot pots on mats to protect your benchtop.
Use between pots when stacking to protect the non-stick coating.
High sides to reduce splattering
Dimensions (mm): 250L x 215W x 55H
Part Number : FC13
Food Tray for Stow & Go BBQ
Provides a convenient place to put your food while grilling.
• Heavy duty stainless steel construction
• Dimensions: 307 x 170 x 38mm
Part Number : 83245
60
Removeable Handle
Chandlery
63. Boat Hooks
Boat Hook (Head Only)
Boat Hook 1.47m
Boat Hook 1.8m (6 ft)
Boat Hook 6 ft - white
Boat Hook 0.62-0.91m
Boat Hook 1.2m-2m
Bridgenorth Bailer / Boat Hook
Boat Hook 1.18-2.04m
Boat Hook 1.25-2.0m
Telescopic Boat Hook with Paddle
Lalizas Kayak Paddle - 2m
Kayak Paddle - 2m
Floating Telescopic Paddle
Telescopic Boat Hook with 2
Cleaning Brushes
“Flow Thru” Boat Brush
65. Sailboat
Hardware
Kiwi Grip Non-Slip Paint
No-Wear Chafe Guard
LALIZAS Winch Handles
Lock-In Floating Winch Handles
Sail Repair Tape
Large Winch Handle Holder PVC
Small Winch Handle Holder
10mm Single Block Pulley with
Swivel
67. Dinghy
Accessories
Dinghy Wheels
Inflatable Boat Repair Kit
Snap Davits for Inflatable Dinghies
for Swimboard Mount
Rowlock Plate
Weaver Replacement / Extra
Rubber Pads
Weaver Davit Heads
Weaver Quick Kit For Snap Davits
Weaver Stainless Yoke
Weaver Stand Off Brackets
Weaver Rubber Pad
Dinghy Davits
62
69. Inflation
Pumps
Double Action Hand/Floor Pump
Air Pump - 12V - Inflate / Deflate
Foot pump - 5 Litre
Quick Pump “Sea Power”, 12V, 60W
Electric Boat Inflator 12V
Adaptor Valve for Inflatable Boats
Multi-Valve Adaptor
70. Dinnerware
17 Piece Dinnerware Set
“Exclusive”
Slip Stop - Non Slip Material
24 Piece Cutlery Set “Exclusive”
6 Piece Mug Ser “Exclusive”
71. Drink Holders
Drink Holder - Lalizas Store All
Drink Holder Stainless Steel
Drink Holder
Rail Mount Drink Holder
BoatMates Folding Drink Holder White (twin pack)
Stainless Steel Recessed Drink
Holder
Recessed Drink Holder - Black
Recessed Drink Holder - White
Teak Glass Holder for 4 Glasses
72. Storage
Case with Net and Plastic Frame
‘Store-All’
BoatMates Cruisin Caddy
BoatMates Cockpit Organizer
BoatMates Trash Stasher
BoatMates Pedestal Cooler Bag
BoatMates Pedestal Gear Bag
Deluxe Bow Bag for Inflatable
Boats
Te’ne’re’ Under Seat Storage for
Inflatable Boats
Stanchion Clip Holding Straps
76. Accessories
Bathyscope
Welcome Mat
Ski Rope and Handle
Illuminated Chart Magnifier
Vacuum Cleaner ‘Sea Power’ 12V
Brass Porthole Mirror
Teak Book Rack
Wind Indicator
Fold Away Aluminium Trolley
Plastic Clinometer
Cork Key Ring Float
Measuring Jug
78. Gullsweep
Bird Scare Control
Standard 2m Gullsweep
Hanging Gullsweep
Gullsweep Rail Mount
80. Brass Lamps
& Bells
Cambrian Miners Safety Lamp
Lacquered Brass Kerosene Lamp
Heavy Duty Brass Ship Bell
Traditional Cargo Lamp
Brass Kerosene Cabin Lamp
Ships Bell
Ship Wheel Bell
C h a n d l e r y - Boat Hooks
Boat Hook (Head Only)
Boat Hook Head
for 30mm tube
Part Number : 3848
Boat Hook 1.8m (6 ft)
Bridgenorth Bailer / Boat Hook
* 25mm diameter Anodized Aluminium tube
Part Number : 50040
A boat-hook, a pump and a manual washer.
Now with thread for attaching a brush
Boat Hook 6 ft - white
Telescopic aluminium handle which securely locks in place for a
strong boathook
2 Sizes: 960mm - 1520mm long (5ft) or
1.4m - 2.4m long (8ft).
* 30mm diameter Aluminium tube
* White powder coat finish which doesn’t tarnish
* Sturdy Italian Made Product
Part Number : 3854
Boat Hook 0.62-0.91m
* Sturdy Aluminium construction
* 34mm diameter rubber grip
* Twist action telescopic
* Made in Europe by Plastimo
Part Number : 3860
Boat Hook 1.2m-2m
* Aluminium Tube with
Plastic Tip and Locking Ring.
* Twist action telescopic
Part Number : 50033
Boat Hook 1.18-2.04m
1.18m to 2.04m Telescopic
Tube Dia: 30mm (outer) and 25mm (inner)
Part Number : 50050
Canadian manufacturer. 2 year manufacturer’s warranty.
Part Numbers :
BAILER5B (5 foot)
BAILER8B (8 foot)
BAILERB ( Brush Attachment only)
Quality Kayak Paddle with Split Shaft
Kayak paddle with split 2-piece shaft for easy disassembly.
Two blade angle options and anti-drip rings.
Features:
*Two Piece shaft
*Strong aluminum alloy
*Anti-drip rings
*Light weight
*2m Long
*Asymmetrical paddle design reduces fatigue and greater
hydrodynamic stability
*3 position ferrule
*High density foam grips
Dimensions:
Full length: 2130mm
Split length: 1050mm and 1120mm (longer piece because of ferrule)
Part Number : 50280
Boat Hook 1.25-2.0m
* Telescopic
* Tube Dia: 30mm (outer) and 25mm (inner)
* White powder coat finish which doesn’t tarnish
* Sturdy Italian Made Product
Part Number : 3855
63
C h a n d l e r y - Boat Hooks
Lalizas Kayak Paddle - 2m
* Sturdy marine grade Aluminium shaft and virtually indestructible plastic blades.
Part Number : 50290
Telescopic Boat Hook with Paddle
* Sturdy Aluminium construction
* Tube Dia: 30mm (outer) and 25mm (inner)
* Twist action telescopic
Part Numbers :3858 57347
3859
(1.04m to 1.27m)
(1.22m to 1.69m)
(1.56m to 2.30m)
Floating Telescopic Paddle
Overall length when fully extended: 1045mm
Can be adjusted to 670mm from the paddle.
Blade size: 157mm x 375mm
Tube diameter: 25mm
Part Number: 156120
“Flow Thru” Boat Brush
The Lalizas “Flow Thru” Boat Brush has 4 exit points to clean evenly on all surfaces.
Can be attached to any standard cleaning brush/bailer.
Part Number : 70689
Telescopic Boat Hook with 2 Cleaning Brushes
The LALIZAS cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle.
The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better
against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking. The brushes and
hooks by LALIZAS are threaded in order to be fitted to the handle.
The telescopic handle is 110cm long and can extend up to 200cm, so that you can adjust it accordingly. It is made of anodised aluminium for
more durability and longevity.
The LALIZAS cleaning products have been designed for your convenience according to your needs.
Part Number : 50906
64
C h a n d l e r y - Kiwi Grip & Sailboat Hardware
Kiwi Grip Non-Slip Paint
As a homogeneous material, KiwiGrip doesn’t suffer the problems encountered with products filled with sand, walnut shells, beads, rubber
fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out — leaving an unsafe deck that’s hard to clean and
even harder to re-coat.As a roll-on product, KiwiGrip is considerably faster and less expensive to apply. Coverage: 2 square meters per liter
(80 SF/Gal).
Ease of application is a big advantage of KiwiGrip. Detailed application instructions are provided with every can. Our special texture rollers
and our non-toxic formula make KiwiGrip very easy to apply.
Available in 1 or 4 Litre tins and in 3 colours: White, Cream and Grey.
Included with each Kit is:
1 x textured roller sleeve (Part Number: 1020-4)
1 x roller handle (Part Number: 1030-4)
Kit Part Numbers :
KG1LKITC - Kiwi Grip Non Slip Paint 1L Cream - Kit
KG1LKITSG - Kiwi Grip Non Slip Paint 1L Soft Grey - Kit
KG1LKITW - Kiwi Grip Non Slip Paint 1L White - Kit
KG4LKITC - Kiwi Grip Non Slip Paint 4L Cream -Kit
KG4LKITSG - Kiwi Grip Non Slip Paint 4L Soft Grey -Kit
KG4LKITW - Kiwi Grip Non Slip Paint 4L White -Kit
No-Wear Chafe Guard
Have you ever looked at your boat and wondered “HOW CAN I STOP THE ROPES RUBBING ON
THE GELCOAT, FIBREGLASS AND WOOD” and prevent wear and tear on my boat?
Well now all your problems are over. Introducing “The No-Wear Chafe Guard”
*Prevent chafe and damage to your boat
*Easy to install
*Highest grade marine Stainless Steel
*Industrial strength double sided adhesive
*Moulds easily to the shape of your boat
Installation
The No-WearGuard is easy to apply. Simply clean and dry the area of the boat to be used (lightly
filling and sanding any dents if neccessary for best results).
Remove the backing paper from the adhesive tape, position the No-Wear Guard and press it down, rubbing with a soft cloth to
ensure all edges are firmly stuck down. If being used on a sharp bend, it is advisable to pre-bend before removing the backing
paper(this can be done by hand, or around the area to be used) this will help with the adhesion. If for any reason you wish to
remove the No-Wear Guard, use either a heat gun or hairdryer, gently heat until it can be pulled off.
Part Numbers :
1007 (228 x 50) - Single Pack
1008 (228 x 50) - Twin Pack
1009 (228 x 50) - Four Pack
Noticeable damage that has been
caused by chafing on the Gel Coat.
Now easily fixed with a No-Wear
Guard that will protect the Gel Coat
and eliminates further damage.
65
C h a n d l e r y - Sailboat Hardware
LALIZAS Winch Handles
LALIZAS Winch Handles have been designed to operate efficiently with the
minimum of effort from you.
They are lightweight, easy to handle and highly resistant to the marine
environment, as they are constructed from anodised aluminium.
LALIZAS winch handles are available in two lengths 20cm and 25cm, each with or
without locking mechanism and speed handles with ball bearing in them.
Part Numbers :
11857 Winch Handle Locking with Speed Handle - 200mm
11859 Winch Handle with Speed Handle - 200mm
11860 Winch Handle Locking - 250mm
11861 Winch Handle Locking with Speed Handle - 250mm
11863 Winch Handle with Speed Handle - 250mm
Lock-In Floating Winch Handles
Sail Repair Tape
Made of Light but Strong Plastic.
Grey with red handle
Clear Mylar that is UV and
water resistant
Add protection on areas
that come in contact with
spreaders
Self-adhesive strong backing
Designed specifically for the temporary repair of sails
in order to prevent further damage until repairs can be
made.
Part Numbers :
63527-08 - 8” (200mm)
63527-10 - 10” (250mm)
Large Winch Handle Holder PVC
PVC holder for quick storage of winch sheet handles or fishing knives
Part Number : 11555 = 100mm (width) x 3m (length)
Soft flexible PVC
Round base with drainage hole
4 x mounting holes & 4 x screws and washers included
Dimensions: 298mm (l) x 92mm (w) Large Winch Handle Holder
Part Numbers : 63572 (Round Base)
63573 (Square Base)
Small Winch Handle Holder
PVC holder for quick storage of winch
sheet handles or fishing knives
Part Number : 63571
10mm Single Block Pulley with Swivel
Manufactured from stainless steel and
fibre reinforced nylon
Lightweight pulley designed for use on
small boats. Ideal for dinghies.
Sheave (Dia) - 34mm
Max. Rope (Dia) - 10mm
D shackle Pin (Dia) - 3mm
Weight - 70g
Part Number : 10131
66
C h a n d l e r y - Dinghy Accessories
MaXtek Dinghy Wheels
The Dinghy Wheel is designed to allow easy movement of small boats
under 115 kg or 3.5 meters long.
Suitable for inflatables, dinghies etc., making
launching and retrieving easy.
Attaching to the transom, the wheels can be
lowered for moving the boat, or raised in two
different positions whilst the boat is on the water.
* 3 Position
* Anti-corrosion construction
* SS mounting hardware supplied
* Stainless shafts and pins secure the wheels
Part Number : 5825
Inflatable Boat Repair Kit
* Glue for PVC Inflatable Boats
* Standard Inflating Valve
* Valve Inflating Adaptor
* PVC Material - 3 pieces
Part Number : 50953
Snap Davits for Inflatable Dinghies for Swimboard Mount
Snap Davits for soft or hard bottomed Inflatable dinghies for vessels with Swim Platforms
Facilitates easy loading and transportation of dinghy.
Dinghy swivels up on brackets.
Part Number : RBD100
67
C h a n d l e r y - Dinghy Accessories
Weaver Replacement / Extra
Rubber Pads
Weaver Rubber Pads for use with Weaver snap davits on
inflatable boats.
Sold in pairs.
Weaver Davit Heads
Weaver Davit Heads.
Sold as a pair.
Part Number :
Weaver RS110
Part Number :
Weaver RP101
Weaver Stainless Yoke
Weaver Quick Kit For Snap Davits
Plates used for easy removal of davit heads from swim
platform (used with RBD100 only)
Weaver Stainless Yoke
Sold as a pair.
Part Number : Weaver RPSH120
Includes mounting hardware and quick-release pins With
lanyard.
Part Number : Weaver Quick kit
Weaver Rubber Pad
Rubber standoff pad (sold individually).
To be used with the Weaver Stand Off Brackets
Part Number : Weaver RP301
Rowlock Plate
Pair of Rowlock Mounts. Two counter-sunk screw hole
to suit flush mounting on to wooden/fibreglass/plastic
dinghys
Manufactured from Chrome plated bronze. Made in New
Zealand and sold as a pair.
Dimensions:
67mm (l) x 24mm (w) x 30mm (d)
11mm (Dia) Rowlock Shaft
Part Number : 5824
Weaver Stand Off Brackets
Weaver Stand Off Brackets
24” or 30” long Stainless Steel brackets
Sold in pairs
Part Numbers :
Weaver SO24 - 24” Brackets
Weaver SO30 - 30” Brackets
68
C h a n d l e r y - Dinghy Accessories & Inflation Pumps
Dinghy Davits
60mm (tube Diameter) or 40mm (tube Diameter)
Made of Stainless Steel
Arm has about about 750mm reach
140mm Cleat
Davits are sold individually
Lifting load:
170kg/pair - 60mm davit
140kg/pair - 40mm davit
Part Numbers :
4472 - 60mm (tube Diameter)
4470 - 40mm (tube Diameter)
Double Action Hand/Floor Pump
Electric Boat Inflator 12V
The LALIZAS Double Action Hand/Floor Pump ideal for inflating
or deflating dinghies, ski tubes, air mattresses plus many more
inflatable products.
* 40mbar, 400lt/min
* Ability of inflation and deflation
* Self-adjusting pressure at 40 mbar (0.55psi) so as to
avoid over-inflation
* Fast and durable motor
* Low current consumption
* Supplied with an adaptor suitable for the most common
type of valves
* Can be connected to the car lighter (3m cable)
To inflate or deflate simply
fasten the air tube to the
appropriate connection
(“Inflate” or “Deflate”) and
pump with steady up and
down strokes.
Supplied complete with a
flexible air tube with 4 sizes
of adaptor nozzles, and a
kit of 6 adaptors (also sold
separately).
Part Number : 11501
Large comfortable handles
give better grip and foot plates provide stability during pumping.
Part Number : 10230
Foot pump - 5 Litre
Adaptor Valve for Inflatable Boats
* Collapses and clips closed
* 5 Litre Chamber
* High volume air
displacement
Easily connect a pump hose to an inflatable boat valve with this
adaptor
Part Number : 50952
* Adaptor for Air Pumps
* Two hose sizes - 15 20mm Ø
Multi-Valve Adaptor
Connects to the most common type of valve; Halkey-Roberts
Part Number : 98970
Universal 6-piece adapter wheel will
adapt to the most common type of
inflatable boat valves
Part Number : 10231
69
C h a n d l e r y - Inflation Pumps & Dinnerware
17 Piece Dinnerware Set “Exclusive”
Made of 100% Melamine.
Dishwasher and microwave safe.
Includes:
*Dinner Plate, Ø 26cm, 4 pieces
*Dessert Plate Ø 20cm, 4 pieces
*Cereal Bowl Ø 15cm, 4 pieces
*Mug, 4 pieces
*Salad Bowl Ø 24cm, 1 piece
Part Number : 57350
Slip Stop - Non Slip Material
Non slip material cut to size 1ft x 12ft roll
Keep everything safe and secure by preventing slipping and
sliding. Washable, easily trimmed material works in tool boxes,
rugs, van floors, shelves, dash boards or anywhere things slide
around or rattle in your RV. Use as a liner between plates, cups and
appliances.
Available in Cream or Blue
Part Numbers :
STOPSLIP BLUE
STOPSLIP CREAM
24 Piece Cutlery Set“Exclusive”
Made from stainless steel and
ABS plastic.
6 x Forks, Knives, Spoons and
Teaspoons.
Dishwasher safe.
Part Number : 57208
6 Piece Mug Set “Exclusive”
6 piece mug set.
Made of 100% Melamine.
Dishwasher and microwave safe.
Part Number : 57218
70
C h a n d l e r y - Drink Holders
Drink Holder - Lalizas Store All
This compact and convenient cockpit saver keeps your drinks up and
out of the way.
With the cutout for handles it is great for coffee mugs and most
glasses, or canned drinks.
Dimensions: 100mm (h) x 110mm (d)
Part Number : 99232 (Graphite colour)
Drink Holder Stainless Steel
Folds closed for low profile look and folds open to hold your drinks
Made of Stainless Steel, with rubber padding on arms and base.
Arms are adjustable so can suit a range of drink sizes.
Part Number : 54098
Drink Holder
Folds closed for low profile look and folds open to hold your drinks
Made of reinforced nylon.
Part Numbers : 54092 (Black)
4252 (Grey)
54092-BP (Black Blister Pack)
Rail Mount Drink Holder
Attaches easily to rails or stanchion posts. Manufactured from white polyethylene.
It will easily hold a full-sized insulated drink can or mug.
Includes stainless steel mounting screws
*Flat or bulkhead mount
*Fits 20 - 25mm rails (1”) horizontal or vertical
Part Number : 54095
71
C h a n d l e r y - Drink Holders & Storage
BoatMates Folding Drink Holder - White (twin pack)
The new Folding Drink Holder features double-ring collar assembly
capable of holding both cans and cans with cozies.
With a new all-resin design, the drink holder won’t rust or corrode.
Its injection molded, commercial grade resin provides superior
durability and an attractive appearance.
Few moving parts results in a longer, more reliable product life.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2170-2
Stainless Steel Recessed Drink Holder
Recessed Drink Holder - Black
Dimensions:
Cut out diameter: 98mm
Overall diameter: 110mm
Depth: 77mm
Dimensions:
Cut out diameter: 98mm
Overall diameter: 110mm
Depth: 77mm
Part Number : 54091
Part Number : 54094
Teak Glass Holder for 4 Glasses
Recessed Drink Holder - White
Teak Glass Holder for 4 Glasses
Dimensions:
Cut out diameter: 70mm
Overall diameter: 85mm
Depth: 73mm
Dimensions:
Length: 430mm
Width: 90mm
Height: 90mm
Part Number : 54093
Glass Holder diameter: 70mm
Part Number : 93332
Case with Net and Plastic Frame ‘Store-All’
This case helps you organise all items when on board with a flexible
holding net.
It is made of UV resistant plastic and can be easily installed either with
screws or with a sticker (supplied) ideal for inflatable and rigid boats.
Dimensions: 205 x 120 x 20mm
Part Number : 11900
72
C h a n d l e r y - Drink Holders & Storage
BoatMates Cruisin Caddy
This easy to mount organizer holds your favorite beverage,
personal items, and even a couple of your favorite lures.
Mounts on a flat surface.
Great for small boats with limited cockpit storage.
With a new all-resin design, the cruisin caddy won’t rust or
corrode.
Its injection molded, commercial grade resin provides superior
durability and an attractive appearance.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2131-1
BoatMates Cockpit Organizer
This easy to mount organizer holds your fishing gear, binoculars,
or personal items.
Keeps baits, pliers, fillet knife safe and organized.
Mounts on a flat surface.
Great for small boats with limited cockpit storage.
With a new all-resin design, the cockpit organizer won’t rust or
corrode.
Its injection molded, commercial grade resin provides superior
durability and an attractive appearance.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2133-1
Boaties Mate GPS / Cell Caddy
Compact organizer holds most hand-held GPS unit’s, and cell
phones.
The essential tech caddy for all boating enthusiasts.
Mounts on a flat surface.
Great for small boats with limited cockpit storage.
With a new all-resin design, the GPS/Cell caddy won’t rust or
corrode.
Its injection molded, commercial grade resin provides superior
durability and an attractive appearance.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2134-1
73
C h a n d l e r y - Removable Storage
Boaties Mate Trash Stasher
The perfect solution for keeping the cockpit or cabin ship shape, and trash out
of the water.
Easy to mount resin frame has a hinged cover to keep the contents from
spilling out, and insects from creeping in.
Quickly mounts on any smooth surface with three super suction cups, or can
be permanently mounted with screws.
Uses the typical supermarket shopping bag
Part Number : 2132-1
BoatMates Pedestal Cooler Bag
Unique half-round design fits under and around most pedestal style seats in
cruisers, fishing boats and pontoons.
Features:
Utilises space that is usually wasted on most boats.
Hook and loop straps keep cooler secure to seat pedestal while non-skid feet
prevent sliding across deck.
Large capacity cooler holds 24 cans of your favorite beverage plus ice.
Heat sealed thermal liner keeps beverages cold for up to 8 hours.
Large mesh exterior pocket holds miscellaneous gear or personal items.
Self-repairing zippers with molded pulls.
Made from heavy 600D polyester with heat sealed insulated PVC liner.
Quick release snaps on each side allows two coolers to be fastened back-toback.
Cushioned carry strap included.
Part Number : 3208-1
BoatMates Pedestal Gear Bag
Unique half-round design fits under and around most pedestal style seats in
cruisers, fishing boats and pontoons.
Features:
Hook and loop straps keep gear bag secure to seat pedestal, while non-skid
feet prevent sliding.
Gear Bag has plenty of interior space for tools, personal gear, fishing tackle,
etc.
Large removeable interior divider with additional pockets provides lots of
organization possibilities.
Two large mesh exterior pockets can hold small items that need quick access.
Clear, zippered pocket on top is ideal for boat registration, or other
documentation.
Made from heavy 600D polyester with self-repairing zippers and heavy
coated mesh pockets.
Quick release snaps on each side allow two bags to be fastened back to back,
or can be attached to our companion pedestal cooler.
Part Number : 3140-1
74
C h a n d l e r y - Removable Storage
Deluxe Bow bag for Inflatable Boats
The deluxe bow bag is manufactured with an exterior, water-resistant
clear-view zippered pocket. It features twin front and full top nylon
mesh storage areas, as well as interior security and storage pockets.
The bag secures to the boat with included suction cups and adhesive.
Constructed from heavy-duty nylon mesh, the mesh bow bag allows
water to drain. It comes with a full top section zipper for easy access
and attaches to the boat with included adjustable shock cord fasteners.
Part Number : 70896
Te’ne’re’ Under Seat Storage Bag for
Inflatable Boats
The Te’ne’re’ under seat storage bag from lalizas provides you with
the extra storage space that is so necessary on any boat. It is made
of PVC Tarpulin and has been designed to fit to any seat. It also
features a shoulder strap which allows you to carry the bag when
you leave the boat.
The top of the bag is padded to “soften the ride” on the wooden
seat. It is water resistant, while the waterproof zipper keeps the storage area dry. It is in grey
colour.
Dimensions: 600mm x 250mm x 190mm
Part Number : 70895
Stanchion Clip Holding straps
Ideal to fix a wind-surf or surf board, a sit-on-top or a wakeboard on the boats’ stanchions.
Plasticlip offers many advantages :
Easy, quick and neat installation : no drilling required ;
you can change the location of your equipment at any moment.
Plasticlip adapts to various tube diameters (from 18.5 to
25.5 mm). It can be horizontally or vertically mounted.
Features:
2 Plasticlip, for any horizontal or vertical tube with a diameter
from 18.5 to 25.5 mm.
2 x 2 m webbing straps with fix-lock.
Supplied with screws and nuts.
Part Number : 37033
75
C h a n d l e r y - Accessories
Bathyscope
Welcome Mat
Collapsible for easy storage
Dimensions: 335mm (ext diameter) X
510mm (H)
Welcome Mat with backing, PVC
Available in grey or blue and in a larger 600 x 900 (Blue Only)
Dimensions: 400 x 600mm and 600 x 900mm (Blue Only)
Part Number : 0800
Part Numbers :
57195 - Grey (400 x
600mm)
57196 - Blue (400 x
600mm)
57198 - Blue (600 x 900)
Ski Rope and Handle
Quality handle with good grip
Alloy Coated Handle
Handle can be detached so rope can be used for towing water toys
Specifications:
Overall length 22.8m (75ft)
Rope dia 6mm (1/4”)
Floating Handle
Part Number : 71020-01
Vacuum Cleaner ‘Sea Power’ 12V
This small sized vacuum cleaner is ideal for cleaning the interior of
boats and cars. Includes a 5m power cord with 12V lighter plug, a
standard wide-mouth attachment for cleaning furniture and a crevice
attachment. Vacuum Power is 15mbar.
Features:
DC 12V
Vacuum Power: 1500Pa
Power Source: 12V cigarette lighter Plug
Accessories Included: standard wide-mouth attachment & crevice
attachment
CE Rated
Part Number : 31403
76
Illuminated Chart Magnifier
Chart Magnifier with built-in light.
65mm Long
Requires 2 x AA Batteries (not included)
Part Number : 91521
C h a n d l e r y - Accessories
Brass Porthole Mirror
Fold Away Aluminium Trolley
Polished Solid Brass Ships Porthole Style Mirror.
This lightweight aluminium trolley will make quick work of items
that need to be transported. When completely folded, it is easy to
carry and transport and makes this hand trolley ideal for the boat,
caravan or home.
An attractive accent piece for hallways, bathroom or any
smaller spaces.
*A nautical classic
*Cast of heavy solid brass
*Lacquered highly polished solid brass
*Supplied with mounting screws
*Features authentic riveted details and opens like an actual
porthole
Dimensions:
OA - 290mm (dia)
Mirror only (dia) - 190mm
Part Number : 91540-12
• Lightweight aluminium frame
• Easily folds compactly away for storage
• Sturdy toe plate
• Toe plate and wheels open and close simultaneously
• Soft grip handle
• Max load: 60kgs
• Comes with elastic fastening strap
Dimensions:
Height when opened: 980mm
Height when closed: 730mm
Width: 480mm
Thickness: 60mm
Toe Plate size: 248mm X 473mm
Wheel Diameter: 168mm
Part Number : 72530
Teak Book Rack
Dimensions:
Length: 397mm
Width: 217mm
Height: 205mm
Part Number : 93334
Plastic Clinometer
Stainless Steel ball in plastic tube
Select from 2 models:
10-0-10 Degrees or 45-0-45 Degrees
Part Numbers:
70083 - 10-0-10 Degrees
70085 - 45-0-45 Degrees
Cork Key Ring Float
Part Number : 11905
Wind Indicator
Plastic direction vane with aluminium tube
Part Number : 70092
Measuring Jug
Measuring Jug - 200gr
Great for Measuring Oil
58mm (OD) x 120mm (H)
Part Number : 2143
77
C h a n d l e r y - Bird Control - Bird Scare
Gullsweep Bird Scare Control
Gullsweep® is a simple and effective method for keeping birds of your vessel. Gullsweep® is an effective bird control and has been
used around the world (for more than 40 years) to ward off flying critters that love to roost & mess on one’s boat. The primary objective of
the Gullsweep® is to make gulls uncomfortable so they will select another roosting sight. Every bird has their predators and so they are
always in a survival mode. Gullsweep® by its very unique nature creates that unknown fear that the moving object represents a potential
danger. Thus with other alternative locations available, it is more suitable to go elsewhere.
Gullsweeps® are not expensive and can be easily mounted, dismounted and stored quickly when boating so that using several on a boat is
very realistic and more effective.
Gullsweep has been used by Boaties around the world for more
than 40 years to ward off flying pests that love to leave a putrid
mess on your boat.
Gullsweeps are effective on boats, roof tops, jetties, navigation
buoys and even on caravans.
78
C h a n d l e r y - Bird Control - Bird Scare
Standard 2m Gullsweep
* Eliminate cleaning time & unsightly stains
* Easy to install (2 screws) or quick non-permanent mountings are
available.
* Doesn’t require any on board power
* Works while you are away
* Sweeps a full 6ft diameter & intimidates birds with it’s movement
* Tested to perform in winds as high as 60 mph - but it is suggested
you do not run boat with Gullsweep in place. Remove & store away.
* To store away, fold in half and snap vanes on top of support rods.
Part Number : GULL-1
Hanging Gullsweep
Ideally suited for Sailboats where a line can quickly be
deployed.
Ideal for hanging from a taut rope.Hang from rope strung
between mast & fore or back stay.
The hanging Gullsweep® (model HGS-1) is easy to install.
Tie a loop in the middle of a line securing one end to the
mast and the other to the fore or back stay.
Line should be relatively tight so as to support a hanging
Gullsweep (weighs 12 oz.), and give sufficient distance
above the deck or boom and allow a minimum horizontal
distance of 7 feet per Gullsweep® for the rotation
diameter.
Your Hanging Gullsweep is ready to be hung. When
attaching it to a line, be sure it is high enough and has sufficient room to rotate. The bottom eye on the support rod can be used to
attach a light line which will assure the Gullsweep will not swing around in a heavy wind. This bottom straightening line should not be
tight and could be secured around the boom to help stabilize the Gullsweep.
* Eliminate cleaning time & unsightly stains
* Easy to install (2 screws) or quick non-permanent mountings are avalable.
* Doesn’t require any on board power
* Works while you are away
* Sweeps a full 5 1/2ft diameter & intimidates birds with it’s movement
* Tested to perform in winds as high as 60 mph - but it is suggested you do not run boat with Gullsweep in place. Remove & store away.
* To store away, fold in half and snap vanes on top of support rods.
Part Number : GULL-H
Gullsweep Rail Mount
This mount is similar to a ‘G’ clamp and can be mounted on a bow rail or on a vertical pole such
as a mast-head light.
For rails up to 40mm.
Part Number : GULL-RM
79
C h a n d l e r y - Brass Lamps & Bells
Cambrian Miners Safety Lamp
Traditional Cargo Lamp
Solid Brass Polished Miners Lamp
This large replica stands tall at 380mm
and is a fully working. Burns either
kerosene or paraffin. Wick assembly is
easily removed with convenient handle.
Manufactured from solid brass and
copper.
This is an authentic miner’s oil burning
safety lamp. Hand made from solid brass
and designed using the traditional Welsh
specification. This beautiful hand crafted
lamp makes an excellent gift. Solid brass
miners’ lamps are easily engraved for a
personal touch.
* Solid polished brass
* Internal gauze
* 250mm height 85mm diameter base
* Net weight 1.45 kg
* Oil Container Capacity 150cc
* Operating time is approx 8 hours
* External lever for wick adjustment
Part Number : WP800
Lacquered Brass
Kerosene Lamp
This lamp is specifically designed for
boats. It features a four-way gimbal
system that helps this lamp keep
upright in any sea condition. A smoke
cover is included to prevent soot from
blackening anything mounted overhead.
Dimensions: 300mm (h) x 120 (dia)
Part Number : 91502
Heavy Duty Brass Ship Bell
Dimensions:
220 x 160 x 380mm (h)
460mm (h) oa including handle
Part Number : WP802
Brass Kerosene Cabin Lamp
Attractive traditional styled brass kerosene lantern.
Made up of three parts which fit together:
A. Outer support frame and housing
B. Wick assembly and fuel holder. This can be removed and
operated separately without frame if need be.
C. Glass chimney
Fully functional.
Complete with carrying hook so can be
carried or hung on a hook.
Dimensions with carrying hook riased
(H) 280mm x (W) 120mm (D) 160mm
Part Number : 91500
Polished Brass
Solid Brass
Part Numbers :
15085-01 - 6” (150mm) Diameter
15085-02 - 8” (200mm) Diameter
Ship Wheel Bell
Ships Bell
Diameter: 75mm
Polished Brass
6 “ (150mm) Diameter
Part Number : 15086
80
Compliment your nautical theme with this solid brass bell. The
bell is cast and is hand-polished. Bracket is easily mounted to
the wall with screws.
Part Number : 91542
Cleaners & Polishes
83. Cleaners
Cleanall Concentrate
Salt-Away 946ml Concentrate +
Mixer
Salt-Away 946ml Concentrate
84. GRUNT
Cleaning Products
& Polishers
GRUNT EMER GEL - 500ml
Grunt SUPAWAX - Polish 500ml
GRUNT KLENASHINE - 500ml
85. Emerkit
Emergency Putty
Emerkit - Epoxy Emergency Kit
Emerkit - Corkit - Aqua
Emerkit - Corkit - Steel
86. Marine
Lubricants
Inox Lanox MX4 Marine Lubricant
82
C l e a n e r s & P o l i s h e s - Cleaners
Cleanall Concentrate
The name says it all. It works wonders when others won’t.
Excellent for Marine use as it is: Non-acidic, non abrasive, 100% Biodegradable, environmentally friendly. non_flammable, deoderises, safe
and easy to use, M.A.F approved and is New Zealand made!
For best results wet area before applying/using clean all.
It has been successfully used as:
Fibreglass Cleaner
One Step Teak Cleaner
Vinyl Cleaner
Sail and Canvas Cleaner
Inflatable Boat Cleaner
Bimini Top Cleaner
Bilge / Toilet Area Cleaner
Shower Cleaner
Galley Cleaner
Fender and Buoy Cleaner
Engine Compartment Cleaner
Part Numbers:
CLEANALL 01L - 1 Litre Bottle
CLEANALL 05L - 5 Litre Bottle
CLEANALL 20L - 20 Litre Container
Salt-Away 946ml Concentrate + Mixer
Comes with the universal quick connector that attaches to your standard hose and motor
flushers connections. Mixing and washdown will now be a breeze and you can just buy
the refills after you have purchased this combo.
Why use Salt-Away?
*Salt-Away combined with our Auto-Mix unit speeds up your cleaning time by at least
50%
*Removes all traces of salt, minimizing the corrosive effects of salt on your engine, trailer,
vehicle, rods and reels.
*Salt-Away is the most concentrated; Just 40mls is all you need to clean your boat,
motor, trailer and all your fishing gear. Financially that works out to be from as little as
$1.15 per wash.
*Salt-Away is the best value for money - 1 litre of concentrate makes 512 litres.
*Salt-Away, unlike some competitor products available is completely safe on all metals (including magnesium alloy), rubber
and plastics, so won’t harm your marine equipment. 100% money back guarantee
Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO
Part Number: CLSALTM
Salt-Away 946ml Concentrate
Mixes up to 512 parts water to one concentrate.
Thats 480 Litres !!
Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ
Navy, NZ Coastguard and NATO
Part Number: CLSALT
83
C l e a n e r s & P o l i s h e s - GRUNT Products
GRUNT Cleaning Products & Polishers
The Grunt range of marine cleaning and polishing products will restore your vessel or car
to its original pristine condition. Easy to apply the Grunt range is proven to work.
GRUNT EMER GEL - 500ml
Rust,Stain and Oxidation Remover
Removes heavy weathering and oxidation, rust and other stains from fibreglass gelcoat,
lacquer and enamel surfaces quick as a flash. Although EMERGEL was first used on boats, it is
very suitable for removing rust stains and heavy weathering from cars, caravans, motorhomes
etc EMERGEL has countless uses.
EMERGEL is a unique product in a gel form that can be applied safely to any flat, curved or
vertical surface. It will rapidly remove rust stains, ball point, pencil stains and many other types
of stains from fabric, metal, masonry, porcelain, enamel, fibreglass and wood without affecting
fast dyes and paint pigments. Rust and water stains on sails, carpet, clothes,sinks, benches,
baths, showers and appliances can all be cleaned with EMERGEL.
Part Number: CLEMERG
Grunt SUPAWAX - Polish 500ml
Protects fibreglass gelcoat and enamel from damage by the hot summer sun, rains, salt water,
dirt and grime, and provides a superlative shine for up to 6 months. Just wipe on SUPAWAX
with a damp cloth right around your boat or car in one application, then simply polish off with a
soft, clean rag.
SUPAWAX will help protect the finish against U.V rays from the sun, dirt, grime, droppings etc
giving an unmatched wax shine. SUPAWAX will also help protect your boat against chalking,
marine growths, and waterline scum. SUPAWAX can be applied in direct sunlight.
Part Number: CLWAX
GRUNT KLENASHINE - 500ml
Oxidation Remove and Restorer
Revitalises and restores fibreglass gelcoat, lacquer and enamel surfaces that have an oxidation
or light weathering haze to cloud their original shine. KLENASHINE is very easy to apply with a
damp cloth. Cover your boat or car with one application, then simply wipe off with a soft cloth.
KLENASHINE cleans and shines all oxidised paint finishes and gelcoat surfaces on your boat,
car, van, truck, caravan, motorcycle, vintage car etc. KLENASHINE can be applied in direct
sunlight which makes it a quick easy one shot, easy application clean up.
Part Number: CLSHINE
84
C l e a n e r s & P o l i s h e s - Emerkit Putty
Emerkit Putty
* Easy to use, mix 1:1
* Water clean-up
* Will not run or drip
* Cures in or out of water
* Non-conductive
* Zero shrinkage, Inert when set
* Sets like concrete - in or out of water , including salt water!
Adheres to: Concrete , Aluminium , Metal , Timber , Fiberglass Porcelain , & Most Rigid Plastics
Emerkit - Epoxy Emergency Kit
White 150g pack
Contains Resin and Hardener which need to be mixed at 1:1 ratio.
Part Number: EMERKIT
Emerkit - Corkit - Aqua
Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.
Corkit will adhere to a wide range of surfaces often eliminatin expensice repairs.
Corkit can be shaped, drilled, sanded, painted and machined as desired.
*Aqua Corkit - Secures permanent repairs in wet or damp conditions and is used to to repair pools,
wooden boat decks and hulls, fittings, pipes, electrical connections, battery cases, scratched,
cuts, gouges and holes. Work Time 10 minutes.
Sets Off White
Keeps your boat afloat and your pool full
Part Number: CORKIT
Emerkit - Corkit - Steel
Emerkit Corkit is a two-part epoxy compound in a 114g single stick form that will cure hard in minutes.
Corkit will adhere to a wide range of surfaces often eliminatin expensive repairs.
Corkit can be shaped, drilled, sanded, painted and machined as desired.
*Steel Corkit - Inherits industrial strength and chemical resistant properties and is used to
repair fuel tanks, radiators, gaskets, pipes, castings, prototypes, tools, stripped threads and
anchor bolts.
Sets Black
Your mobile toolbox fix-all-kit
Part Number: CORKIT STEEL
85
C l e a n e r s & P o l i s h e s - Marine Lubricants
Inox Lanox MX4 Marine Lubricant
Designed for heavy industrial, mining, farming, marine, earth moving and transport type use
and where extreme climatic and high humidity conditions prevail.
Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly
referred as ‘WOOL FAT’ or ‘WOOL GREASE’, it has wide spread uses, cosmetics, medical,
soaps, etc. Down through the centuries the Egyptians, Romans, Vikings, sailors and soldiers
alike all used lanolin as a very effective anti- corrosion and waterproofing agent for a variety of
metals, materials, timbers, to protect sails, leather, cannons, etc. Although we make INOX, a
quality anti-corrosion lubricant, there are areas where a lanolin based anti-corrosion lubricant
like LANOX is sometimes better suited for the application at hand.
*LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade
lubricating oil and lanolin base with specialized chemical compounds.
*LANOX contains no silicon, kerosene, acids or dieselene.
*LANOX is harmless to metal points & surfaces, plastics, painted & enamel finishes, fibreglass,
formica, rubber or neoprene seals.
*LANOX doesn’t become sticky, gooey or gum up.
*LANOX is non-conductive, non-static & non-corrosive.
*LANOX has neutral properties, low flammability (NON-AEROSOL)
Part Number: INOX LANOX 300G
86
87
Clothing & Bags
91. Shoes/Boots
Long-Leg Tie-Top Sailing Boots
Deck Shoes - Skipper Classic
Sportive Deck Shoes
90. Gloves &
Clothing
Lalizas Sailing Fleece Vest
Full Finger Gloves, Neoprene
5 Finger Cut Sailing Gloves AMARA
Lalizas Sailing Cap
91. Bags
Sailing Bag with Shoe
Compartment
Sailing Bag
Sailing bag with wheels
88
92. OVERBOARD Dry Bags & Phone Covers
100% Waterproof Phone Cases
100% Waterproof Tech / Tablet
Cases
100% Waterproof MP3 Cases
100% Waterproof Camera Cases
100% Waterproof VHF Cases
Pro-Sports Waterproof Belt Pack
Waterproof Ipad Pod
Fixed Rail Mount for Ipad Pod
Waterproof Dry Pouches
20 Litre Kayak Deck Bag
Waterproof Earphones
Waterproof Dry Tubes
Waterproof Backpacks
Waterproof SLR Camera Bag
Carbon Waterproof Range
Waterproof Waist Packs
A4 Waterproof Map Pouch
Waterproof Duffel Bags
Waterproof Ninja Duffel Bag
C l o t h i n g / A p p a r e l - Shoes & Boots
Long-Leg Tie-Top Sailing Boots
Smartly designed LALIZAS Long Leg Sailing Boots are perfect for sailing.
Constructed from natural rubber with razor cut non-slip soles for better traction.
Hard wearing with extra toe and heel reinforcement. The tie top feature and
cushioned leg top render them extremely comfortable to wear.
Available in navy blue with contrasting white trim.
Part Numbers :
40434 - Size 41 INT / 8 UK / 8.5 US
40435 - Size 42 INT / 8.5 UK / 9 US
40436 - Size 43 INT / 9.5 UK / 10 US
40437 - Size 44 INT / 10 UK / 10.5 US
40438 - Size 45 INT / 11 UK / 11.5 US
40439 - Size 46 INT / 12 UK / 12.5 US
Southern Ocean Long-Leg Tie-Top Sailing Boots
Southern Ocean Long Leg Sailing Boots are perfect for sailing. Constructed from
natural rubber with razor cut non-slip soles for better traction.
Hard wearing with extra toe and heel reinforcement. The tie top feature and
cushioned leg top render them extremely comfortable to wear.
Part Numbers :
SOB5 - Size 38 INT / 4 UK / 5 US
SOB6 - Size 39 INT / 5 UK / 6 US
SOB7 - Size 40 INT / 6 UK / 7 US
SOB8 - Size 41 INT / 7 UK / 8 US
SOB9- Size 42 INT / 8 UK / 9 US
SOB10 - Size 43 INT / 9 UK / 10 US
SOB11 - Size 45 INT / 10 UK / 11 US
SOB12 - Size 46 INT / 11 UK / 12 US
SOB13 - Size 47 INT / 12 UK / 13 US
Deck Shoes - Skipper Classic
Cruise in style with Lalizas Deck Shoes “Skipper”. Designed to provide comfort and
durability, they are ideal for use at all times, while travelling at sea, or going for a
stroll on land.
The “Skipper” shoes are hand-sewn and made from premium Mexican leather with
rawhide lacing. Their non-slip rubber outsole has a special design so as to offer
maximum traction and safety on any wet and slippery surface, such as decks and
docks. Their classic moccasin design allows a perfect fit to your own foot’s bone
structure. These versatile shoes are available in brown colour with brown outsole.
Part Numbers : Size 41 - 40577 , Size 42 - 40578 , Size 43 - 40579 ,
Size 44 - 40580 , Size 45 - 40581 , Size 46 - 40582
89
C l o t h i n g / A p p a r e l - Gloves & Hats
Sportive Deck Shoes
Lalizas Deck Shoes offer style and comfort, while meeting your boating needs.
Designed to offer you extra traction and stability so that you have a good grip on wet
surfaces. It features air mesh panels for greater breathability, quick dry footbed and a
non-slip TPR outsole that will keep you manoeuvring fast on your feet, even on wet a
deck.
Part Numbers : Size 36 - 70918 , Size 37 - 70919 , Size 38 - 70920 ,
Size 39 - 70921 , Size 40 - 70922 , Size 41 - 70923 , Size 42 - 70924 ,
Size 43 - 70925 , Size 44 - 70926 , Size 45 - 70927
Lalizas Sailing Cap
Available in Blue
Part Number : 40060
Lalizas Sailing Fleece Vest
The Lalizas Sailing Fleece Vest is a must for you, for those cold days on the boat.
It is made of microfibre on the outside and fleece on the inside in order to keep
your body warm. Additional features which are worth noting are the two hand
pockets and the adjustable waist strings.
Sizes fit snuggly, so choose the next size up if unsure.
Part Numbers :
40554 - Large
40555 - Extra Large
Full Finger Gloves, Neoprene
5 Finger Cut Sailing Gloves - AMARA
Full finger “Pro Race” gloves are your essential allies against cold
and wind in water sport activities.
Your hands are sealed with 3:2mm neoprene thickness for
protection and flexibility in cold waters. Your palm and fingers are
covered with smooth Amara leather for excellent grip of ropes,
fishing guns, paddles and other sea-sport equipment.
Our recommendation for best buy value. Made of very soft
Amara, with elastic spandex back and padded palm.
Our Amara sailing gloves offer comfort and durability for light
work on the boat.
Part Numbers :
70571 - Small
70572 - Medium
70573 - Large
70574 - XL
90
Part Numbers :
40095 - Small
40096G - Medium
40097 - Large
40098 - XL
C l o t h i n g / A p p a r e l - Bags
Sailing Bag with Shoe Compartment
This Lalizas bag has been designed for extensive use. It is made of durable 600
Denier Ripstop Polyester/PVC. Its dimensions allow you to carry many items in its
main compartment and in an additional one at the bottom of the bag, suitable for
storing shoes. It has a detachable shoulder strap as well as plastic grips on the
handle straps, for easier and more comfortable carriage.
Dimensions: 530mm (L) x 430mm (W) x 530 (H)
Part Number : 40908
Sailing Bag
Lalizas Sailing Bag is made of durable 600 Denier PVC coated waterproof
Ripstop polyester. The bag is light in weight making it the ideal choice for
any usage.
Featuring: 1 main compartment, 1 main side compartment, 2 side
compartments, lockable zip, handle straps and detachable shoulder strap.
Dimensions: 85cm(l) x 28cm(h) x 36cm(w)
Part Number : 40907
Sailing bag with wheels
For those wanting to keep their travel essentials organised, the large crew bag
is ideal. Made of 600 Denier PVC coated Ripstop polyester it offers great water
protection.
Storage isn’t a problem with two heavy-duty wheels taking the strain of larger
loads. Featuring 1 main compartment, 1 front compartment, 2 side compartments,
lockable zip, detachable shoulder strap, carry handles and extendable pull handle.
Bag Dimensions: 780mm (l) x 280 (h) x 360 (d)
Part Number : 40906
91
100% Waterproof IPhone Cases
Thanks to a transparent front and LENZFLEX back for ultra clear
photos, you can browse, chat or snap away while our 100% waterproof
Slide Seal System™ ensures your phone is fully protected inside the
waterproof phone pouch.
Compatible with all small phones (including iPhones, Blackberry phones
and HTC desires), the small OverBoard Waterproof Phone Case is also
guaranteed submersible to 19ft / 6m so you can drop it in the water
without paying for it.
Now all you’ve got to do is decide if you want it in Aqua or Black.
*Slide Seal System
*Waterproof and submersible to depth greater than 12ft*
(maximum depth of 19ft for all overboard cases)
*Make and take phone calls when phone is sealed in waterproof
phone pouch
*Keeps out dust, sand, dirt and water
Part Numbers :
OB1008A - Small Phone Case - Aqua
OB1008BLK - Small Phone Case - Black
100% Waterproof Smart Phone Cases
Thanks to a transparent front and LENZFLEX back for ultra clear
photos, you can browse, chat or snap away while our 100% waterproof
Slide Seal System™ ensures your phone is fully protected inside the
waterproof flip phone case.
The large OverBoard Waterproof Phone Case is also guaranteed
submersible to 19ft / 6m so you can get creative with some underwater
photography.
Browse the web with this phone case as it is designed to accomodate
the latest Smart phones with larger screens. It features a larger window and is
compatabile with;
Samsung Galaxy S3, Nokia Lumia 920, BlackBerry Curve 3G 9300.
Now all you’ve got to do is decide if you want it in Aqua or Black.
*Slide Seal System
*Waterproof and submersible to depth greater than 12ft*
(maximum depth of 19ft for all overboard cases)
*Make and take phone calls when phone is sealed in waterproof phone pouch
*Keeps out dust, sand, dirt and water
Part Numbers :
OB1065A - Large Phone Case - Aqua
OB1065BLK - Large Phone Case - Black
92
100% Waterproof PSP / GPS Cases
Super-versatile, this product works as a waterproof GPS case, a
waterproof PSP case, or a waterproof phone case for large and flip
phones. Perfect for water-based sports, it protects devices from water
and dirt while allowing full use of the controls.
The OverBoard Waterproof GPS / PSP Case is guaranteed submersible
to 19ft / 6m, so you can even try your hand at some underwater
gaming!
Our 100% waterproof Slide Seal System™ ensures your device is fully protected inside
the waterproof GPS case, while the transparent front means you still have full use of it.
So whether you’re into underwater & onboard gaming, or need full use of your handheld
GPS or phone in wet conditions; this waterproof case covers all three.
*Slide Seal System
*Waterproof and submersible to depth greater than 12ft*
(maximum depth of 19ft for all overboard cases)
*Transparent front window allowing full use of device features
*Keeps out dust, sand, dirt and water
Part Number: OB1009BLK - Large GPS / PSP / Phone Case - Black
100% Waterproof Camera Cases
100% Waterproof VHF Cases
- Slide Seal System
- Waterproof and submersible to depth greater than 12ft
- (maximum depth of 19ft for all overboard cases)
- Slide Seal System
- Waterproof and submersible to depth greater than
12ft
- (maximum depth of 19ft for all overboard cases)
Part Numbers :
OB1052BLK - Zoom Lens Camera Case
OB1025BLK - Camera case
Part Numbers :
OB1035BLK - Small VHF Case
OB1036BLK - Large VHF Case
93
100% Waterproof MP3 Cases
A must-have for all water sports enthusiasts who never like to be
without their favourite tunes, this heavy duty padded waterproof iPod
case lets you take them on the water and will keep players free of dirt
and sand as well.
A tough and fully adjustable Velcro sports arm strap gives you
maximum movement, while the transparent front window allows full
use of all touch screen controls and functions.
Don’t worry if things get active, thanks to our 100% waterproof
Slide Seal System™ this case can take a dunking and is guaranteed
submersible to 19ft / 6m, plus it will float if dropped in the water.
The OverBoard Waterproof iPod Case is specially designed to protect
your iPod, but will also fit many similar-sized and smaller MP3 players,
as well as iPhones.
From windsurfing & kitesurfing to kayaking & swimming or just lazing
around the pool or on the beach; our waterproof MP3 case lets you
add a whole other dimension to the experience.
Available in Black or White.
*Slide Seal System
*Waterproof and submersible to depth greater than 12ft*
(maximum depth of 19ft for all overboard cases)
*Make and take phone calls when phone is sealed in waterproof
phone pouch
*Keeps out dust, sand, dirt and water
Part Numbers :
OB1027BLK - Pro-Sports MP3 case - Black
OB1027WHT - Pro-Sports MP3 Case - White
100% Waterproof Tech / Tablet Cases
Waterproof Earphones
*Slide Seal System
*Waterproof and submersible to depth greater than 12ft
*(maximum depth of 19ft for all overboard cases)
Compatible with all music players, these 100% waterproof
earphones boast a comfortable in-ear design with Small, Medium
and Large silica gel ear buds so you can find the perfect fit.
Part Numbers :
OB1073F - Multipurpose Jumbo Case
OB1086BLK - iPad Case
Our waterproof earphones are also guaranteed to a depth of 19ft /
6m and are recommended for use with our OverBoard Waterproof
MP3 Case.
Get them in Black or White.
Technical Specs:
Frequency Response: 19Hz - 20 kHz
Imepdance: 32 Ohm
Sound Pressure Level: 100db
(1kHz/1Vrms)
Audio Jack Plug: 3.5mm stereo
Part Numbers :
OB1038BLK - Black
OB1038WHT - White
94
Pro-Sports Waterproof Belt Pack
Designed to take your valuables with you in all conditions, the
OverBoard Waterproof Belt Pack is 100% waterproof, super
hardwearing and can be worn around your waist.
1 x Black Waterproof Belt Pack
1 x Removable Waist Belt (fits up to 49” waists)
1 x Caribineer Clip
1 x Neck Lanyard
1 x Moisture Sensitive Desiccant Sachet
1 x Instructions / Care Guide
Part Number : OB1050
Waterproof Ipad Pod
Mount your iPad safely on your boat so it can be used in any weather conditions,
whether fixed to your deck or mounted at the helm.
Compatible with the OverBoard waterproof iPad case and allows integration with
your on-board systems and marine electronics.
Engineered by MarinePod with a quick attachment system.
Features:
*Compatible with OverBoard Waterproof iPad Cases
*Easily secures to your boat deck, helm or grab rail (Rail Mount sold separately)
*Use your iPad out on deck in all weather conditions
*iPad case and mount compatible with iPad, iPad 2 or iPad 3
Dimensions:
Length: 325mm
Width: 250mm
Depth: 35mm
Pod support only.
Part Number : 1000
Fixed Rail Mount for Ipad Pod
Stainless Steel Fixed Rail Mount for use with the Waterproof Ipad Pod
(part number 1000)
Attach to the rail of your boat and can be used in a landscape or portrait
orientation.
Fits most standard rail sizes.
Dimensions:
Width: 50mm
Length: 58mm
Depth: 50mm
Part Number : 1001
95
Waterproof Dry Pouches
Waterproof so when done up tight it will float or can handle quick submersions
Part Numbers :
OB1015R - 1 Litre Dry Pouch - Red OB1015B - 1 Litre Dry Pouch - Blue
OB1015Y - 1 Litre Dry Pouch - Yellow
OB1015BLK - 1 Litre Dry Pouch - Black
20 Litre Kayak Deck Bag
Stylish and practical, our Yellow roll-top kayak deck bag will sit rock tight on your kayak deck
through six easy side buckle connectors, keeping your gear bone dry on all your kayaking
missions.
Our waterproof kayak bag is constructed from sturdy & easy to wipe clean PVC tarpaulin and
seals tight with our easy to use Fold Seal System™. Add to that welded seams and you’ve
got a waterproof kayak bag that can handle any rapid! And if you do drop it in the water, this
highly visible Yellow kayak bag will neatly float to the top so you can get it back easily.
Apart from being totally waterproof, our kayak deck bag also features a removable shoulder strap for
easy transportation, plus a front weatherproof accessories/document pocket and storage webbing to
easily store & locate smaller items.
Part Number : OB1094Y - 20 Litre Kayak Bag Yellow
Waterproof Dry Tubes
Waterproof so when done up tight it will float or can handle quick submersions. Shoulder Strap included with all dry tube bags
Part Numbers :
OB1001BLK - 5 Litre Dry Tube - Black OB1001Y - 5 Litre Dry Tube - Yellow OB1003R - 12 Litre Dry Tube - Red
OB1003Y - 12 Litre Dry Tube - Yellow OB1007Y - 40 Litre Dry Tube - Yellow
96
OB1005P- 20 Litre Dry Tube - Pink
OB1005BLK - 20 Litre Dry Tube - Black
OB1005Y - 20 Litre Dry Tube -Yellow
OB1057Y - 20 Litre Window Dry Tube - Yellow Waterproof Backpacks
No zips means no leakage, so this large rucksack has a
seamless electronically welded construction, making it
fully submersible.
*Floats.
*Padded lumbar support and shoulder straps.
*Adjustable chest and waist supports.
Part Numbers :
OB1053Y - 20 Litre Backpack - Yellow
OB1053BU - 20 Litre Backpack - Blue
OB1054BLK- 25 Litre Backpack - Black
OB1054BU - 25 Litre Backpack - Blue
OB1096BLK- 30 Litre Pro-Sports Backpack - Black
Waterproof SLR Camera Bag
Take your SLR camera safely on all your adventures with our Waterproof SLR Camera Bag, featuring a handy adjustable shoulder
strap and a protective inner lining.
Made of tough PVC tarpaulin, this waterproof camera bag seals tight thanks to our trusty
Fold Seal System™ and with welded seams as well, it offers full protection from water, sand
and dirt. Our waterproof SLR bag also floats when dropped in water so you can get a little
clumsy without losing your expensive gear.
Storing and accessing smaller items is easy with
a large internal wet/dry pocket and an elasticated
mesh accessories pocket, while a reflective front
patch offers extra visibility. Suitable for most SLR
camera models.
Part Number : OB1087BLK
Carbon Waterproof Range
Waterproof Waist Packs
Waterproof so when done up tight it will float or can handle
quick submersions.
Waterproof so when done up tight it will float or can handle quick
submersions.
Part Numbers :
OB1047C - 32 Litre Carbon Backpack
OB1046C - Carbon Roll-top Messenger Bag
Part Numbers :
OB1049Y - 3 Litre Waist Pack - Yellow
OB1049BLK - 3 Litre Waist Pack - Black
97
A4 Waterproof Map Pouch
Waterproof so when done up tight it will float or can
handle quick submersions
Part Number : OB1081BLK - A4 Map Pouch
Waterproof Duffel Bags
The perfect bag for travel, sailing or water sports bag.
If you need a bag…why not get a fully waterproof OVERBOARD and keep your gear dry.
Part Numbers :
OB1089Y - 40 Litre Roll-Top Duffel - Yellow OB1012Y - 60 Litre Roll-Top Duffel - Yellow
Waterproof Ninja Duffel Bag
Our elite duffel bag is super tough military grade with heavy duty
buckles and clips. Includes twin rubber handles at each end.
This is the ultimate 100% waterproof duffel bag.
Part Number :
OB1045BLK - 130 Litre Ninja Roll-Top Duffel - Black
98
OB1089B - 40 Litre Roll-Top Duffel - Blue
Electrical - BEP Marine
101. Battery
Distribution
BEP 12V Dual Battery Switches
with VSR and Emergency Parallel
BEP 714-140A Dual Battery
Selector with VSR
BEP Dual Battery Switches with
Emergency Parallel
BEP Twin
BEP Twin Outboard 140A DVSR
Battery Distribution Cluster - Three
Battery Banks
BEP Twin Inboard 140A DVSR
Battery Distribution Cluster - Three
Battery Banks
BEP Triple Outboard 140A DVSR
Battery Distribution Cluster - Four
Battery Banks
BEP Contour Connect Battery
Distribution Panel with VSR- Single
Engine Two Battery Banks
BEP Contour Connect Battery
Distribution Panel with VSR- Single
Engine Two Battery Banks
BEP Contour Connect Battery
Distribution Panel with VSR- Twin
Outboard Three Battery Banks
BEP Contour Connect Circuit
Protection Module
BEP 800-MS4 Battery
Management Panel - Single Engine
Two Battery Banks
BEP 800-MS1 Battery
Management Panel - Single Engine
Two Battery Banks
BEP 800-MS2 Battery
Management Panel - Twin Engines
Three Battery Banks
BEP 800-MS3 Battery
Management Panel - Twin Engines
Three Battery Banks (Large Diesel
Engines)
BEP 722 Electric Battery Switch
300 Amp
BEP 721 Heavy Duty Battery
Selector Switch
BEP 720 Heavy Duty On/Off
Battery Switch
BEP 720 Remote Operated
Motorised Battery Switch with
Optical Sensor
BEP 701-MD Remote Operated
Motorised Battery Switch 275Amps
BEP 701 Medium Duty On/Off
100
Battery Switch
BEP 701 Battery Switch - Panel
Mount
BEP 701-S Mini Battery Selector
Switch
BEP 701-S Mini Battery Selector
Switch - Panel Mount
BEP 700 Easy Fit Battery Switch
BEP Double Pole Battery Switch
BEP Key for 700 Switch
BEP Key for 700 Switch
BEP 720 Remote Operated
Motorised Emergency Parallel
Switch
BEP 701 Dual Operation VSS and
Emergency Parallel Switch
BEP DVSR 140 Amp - 12/24 Volt
BEP Key Switch Control for MD
Motorised Switches
BEP Remote Emergency Parallel
Switch for MD Motorised Switches
112. DC Circuit
Breaker Panels
BEP 4 Way Circuit Breaker Panel
900
BEP 8 Way Circuit Breaker Panel
901
BEP 12 Way Circuit Breaker Panel
902
BEP 16 Way Circuit Breaker Panel
904
BEP 24 Way Circuit Breaker Panel
905
BEP 32 Way Circuit Breaker Panel
906
BEP 12 Way Circuit Breaker Panel with Analogue Meter
BEP 16 Way Circuit Breaker Panel with Analogue Meter
BEP 24 Way Circuit Breaker Panel with Analogue Meter
BEP 32 Way Circuit Breaker Panel with Analogue Meter
BEP 32 Way Circuit Breaker
Vertical Panel - with Analogue
Meter
BEP 48 Way Circuit Breaker Panel with Analogue Meter
BEP 12 Way Circuit Breaker Panel with Digital Meter
BEP 20 Way Circuit Breaker Panel with Digital Meter
BEP 24 Way Circuit Breaker Panel with Digital Meter
BEP 32 Way “Cruiser Series” Yacht
Circuit Breaker Panel - with Digital
Meter
BEP 36 Way “Cruiser Series”
Launch Circuit Breaker Panel - with
Digital Meter
BEP 28 Way Millennium Circuit
Breaker Panel - with Digital Meter
BEP 32 Way Millennium Circuit
Breaker Panel - with Digital Meter
BEP 44 Way Millennium Circuit
Breaker Panel - with Digital Meter
BEP 56 Way Millennium Circuit
Breaker Panel - with Digital Meter
BEP Contour Connect Circuit
Protection Module
BEP Contour Connect Circuit
Breaker Module
BEP Contour Connect Push to Reset
and Toggle Circuit Breaker Module
121. Switch Panels
BEP 3 Way Spray Proof Switch
Panel
BEP 4 Way Spray Proof Switch
Panel
BEP 5 Way Spray Proof Switch
Panel
BEP 6 Way Spray Proof Switch
Panel
BEP 6 Way Contour Spray Proof
Switch Panel
BEP Micro Series
BEP Contour Interior Switch Single
BEP Contour Interior Switch Double
BEP Contour Exterior Switch Single
BEP Contour Exterior Switch Double
BEP 32111 - Toggle Switch
BEP Splash Proof Boot
124. Battery
Distribution
Accessories
BEP Insulated Stud (single) - 6mm
BEP Insulated Stud (single) - 8mm
BEP Insulated Stud (single) - 10mm
BEP Insulated Stud Covers (10mm)
BEP Insulated Dual Stud linked
-10mm
BEP Insulated Dual Studs - 6mm
BEP Insulated Dual Studs -10mm
& 8mm
BEP Insulated Dual Stud Cover
(6mm)
BEP 702 Distribution Studs
BEP 702 Dual Distribution Stud
BEP 704 Distribution Stud
BEP Heavy Duty Distribution Bus
- 300A
BEP Heavy Duty Distribution Bus
- 500A
BEP Ammeter Shunt Enclosure
BEP Terminal Blocks
BEP Bus Bars
BEP Dual Bus Bars
BEP Bus Bar - 150Amps
BEP Bus Bar Covers
BEP Contour Heavy Duty Circuit
Breakers
BEP 707 Circuit Breaker Module
BEP Fuse holder Heavy Duty
BEP 24 hour Essential Circuit
Breaker Module (4W)
BEP 24 hour Essential Circuit
Breaker Module (2W)
Airpax Single Pole Circuit Breakers
BEP Surge Protection Module
BEP Terminal Blocks
BEP Heavy Duty ANL Fuses
BEP Digital Ammeter Shunt
130. Monitoring
Systems
BEP DC Systems Monitor (DCSM)
BEP Ultrasonic Tank Sender - No
Moving Parts
BEP LED Tank Level Monitor
BEP Water Tank Sender Probe Kit
BEP Gas Detector 600-GD
BEP Gas Detector 600-GDL
BEP Gas Shut Off Switch 600-LPG
Solenoid Valve and Regulator Kit
Solenoid Valve
BEP Gas Detector with Built-In
Sensor 600-GDRV
BEP Gas Detector FD-2
E l e c t r i c a l - Battery Bank Clusters
BEP 12V Dual Battery Switches with VSR and Emergency Parallel
An ideal replacement for a Battery Selector Switch. Just remove selector switch and connect
existing wires to 716, no extra wires are required for a fully automatic battery management
system. No more flat start batteries, protects electronics from harmful engine start spikes.
Dual Battery charging clusters
For use on charging systems under 140A.
To be used in the following systems:
1. Single outboard dual battery bank
2. Single alternator inboard engine dual battery bank
Dimensions:
276L X 69W x 75H mm (horizontal & vertical)
138L X 138W x 75H mm (square)
Part Numbers :
716-H-140A-DVSR - Horizontal
716-V-140A-DVSR - Vertical
716-SQ-140A-DVSR - Square
BEP 714-140A Dual Battery Selector with VSR
The 714-140A-DVSR uses our new dual sensing 12 & 24 Volt VSR (710-140A). A
welcome addition to the 701 selector switch it ensures you will always have a fully
charged reserve battery. When the switch is in position 1 it becomes the sensing
battery for the VSR. Battery 2 which is in isolation will be charged via the VSR
when the engine is running ensuring it is always fully charged. When the switch is
in battery 2 position this becomes the sensing battery and battery 1 is charged via
the VSR. The fact that there is always a fully charged battery in reserve is a huge
safety factor.
Dimensions: 138L x 69W x 75H mm
Please note: With this system the electronic loads are run off the same battery as
the engine starting, which can be a disadvantage.
Part Number : 714-140A-DVSR
BEP Dual Battery Switches with Emergency Parallel
Suitable for use in the following systems:
1) Single outboard dual battery bank
2) Single alternator dual battery bank
3) Twin alternator dual battery bank
Dimensions: 207(L) X 69(W) x 75(H) mm
Part Numbers :
715-H (Horizontal)
715-V (Vertical)
101
E l e c t r i c a l - Battery Bank Clusters
BEP Twin Outboard 140A DVSR Battery Distribution Cluster
- Three Battery Banks
This system is designed for twin outboard installations using outboards
without AUX outputs. It will allow the port engine to charge the port start
battery and the house battery when the VSR is engaged (refer VSR specs
for operation of VSR.)
It will also allow the starboard engine to charge the starboard start
battery and the house battery when the starboard VSR is engaged, giving
a combined charge from two outboards into the house battery until the
voltage regulators on both engines control the charge. It will also allow the
house battery to be charged if steaming on one engine.
Dimensions: 207L X 138W x 75H mm
(8.2L X 5.4W x 3H”)
Part Number : 717-140A-DVSR
BEP Twin Inboard 140A DVSR Battery Distribution Cluster
- Three Battery Banks
The 718-140A-DVSR is designed for twin inboard systems when it is not
practical to have both engine alternators in parallel because of the types
of regulators used on these alternators. The house battery is charged
from the port engine when the VSR is engaged.
Dimensions: 207L X 138W x 75H mm
(8.2L X 5.4W x 3H”)
Part Number : 718-140A-DVSR
BEP Triple Outboard 140A DVSR Battery Distribution Cluster
- Four Battery Banks
The 719-140A-DVSR was designed through popular demand for our
717-140A-DVSR cluster. This system is designed for triple outboard
installations. Once again using multiple VSR’s off each start battery
giving combined charge from all 3 outboards into the house battery via
VSR’s.
Dimensions:207L X 207W x 75H mm
(8.2L X 8.2W x 3H”)
Part Number : 719-140A-DVSR
102
E l e c t r i c a l - Battery Distribution Panel
BEP Contour Connect Battery Distribution Panel with VSR- Single Engine
Two Battery Banks
The CC-801 incorporates a version of our very successful 714 cluster.
The CC-801 is supplied pre-wired with back cover fitted.
Consists of a BEP 701-S Battery Selector Switch and a VSR in a Panel
mount option. Operations identical to 714-140A-DVSR.
It is supplied with a CC-J joiner to allow it to be combined with other
modules.The CC-801 is supplied standard in charcoal with light grey
wave strip.
Module dimension:
166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D
Cutout dimension:
146mm (5.75”) L x 86mm (3.4”) W (single only)
Part Number : CC-801
BEP Contour Connect Battery Distribution Panel with VSR- Single Engine
Two Battery Banks
The CC-802 incorporates a version of our very successful 716 single engine
battery switch cluster.
Consists of three BEP 701 Battery Selector Switches and a VSR in a Panel
mount option. Operations identical to 716 range.
The CC-802 is supplied loosely assembled with links and joiners to allow it
to be assembled in either the vertical or horizontal orientation as shown in
illustrations.
Full wiring instructions are supplied to allow pre-assembly for both
applications.
Overall Dimension (Vertical):
166mm(6.5”) L x 212mm (8.4”) W x 55mm (2.2”) D.
Cutout dimension (Vertical):
146mm (5.75”) L x 192mm (7.6”) W
Part Number : CC-802
Virtical: 166W x 212H x 55D mm
Horizontal: 332W x 106H x 55D mm
103
E l e c t r i c a l - Battery Distribution Panels
BEP Contour Connect Battery Distribution Panel with VSR- Twin Outboard
Three Battery Banks
The CC–803 incorporates a version of our very successful 717 dual engine
battery switch cluster. The CC–803 is supplied with cables to allow different
configurations. The components can also be easily removed and reconfigured if the
factory layout does not suit your application.
Consists of four BEP 701 Battery Selector Switches and a VSR in a Panel mount
option. Operations identical to 717 range.
Overall Dimension:
166mm(6.5”) L x 318mm (12.5”) W x 55mm (2.2”) D
Cutout Dimension:
146mm (5.8”) L x 298mm (11.7”) W
Part Number : CC-803
BEP Contour Connect Circuit Protection Module
The CC-805T is supplied pre-wired and fitted with one 701PM battery
switch, 2 x 10amp and 2 x 15amp toggle circuit breakers. Supplied with
SET-CC-1 label sheet and back cover to enclose exposed terminals.
Module dimension:
166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D
Cutout dimension:
146mm(5.75”) L x 86mm(3.4”) W
Part Number : CC-805T
BEP 800-MS4 Battery Management Panel - Single Engine
Two Battery Banks
The 800-MS4 panel is designed for sail boats up to 14m (46’) and power
boats up to 10m (32.9’) with single engines.
800-MS4 is supplied with a 702 negative stud. Also supplied with a full label
set for panel circuit breakers.
Features:
*Essential circuits, 24 hour supply
*Mains breakers for control panels, davit winches, or treatment systems
*Heavy duty breakers for anchor winches
*Powder coated aluminium panel
*Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
Dimensions: 160H x 239W x 75D (6.3H x 9.4W x 2.9D”)
104
Part Number : 800-MS4
E l e c t r i c a l - Battery Distribution Panels
BEP 800-MS1 Battery Management Panel - Single Engine
Two Battery Banks
The 800-MS1 Panel is designed for power or sail boats 10 to 12m(32.9 to
39.5’) with single engines.
Panels are supplied with a BEP 703 heavy duty negative bus, to
accommodate all negative connections at the battery. Also supplied with a
full label set for panel circuit breakers.
Features:
*Essential circuits, 24 hour supply
*Mains breakers for control panels, davit winches, or treatment systems
*Heavy duty breakers for anchor winches
*Powder coated aluminium panel
*Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
Dimensions: 260H x 351W x 75D mm (10.25H x 13.8W x 2.9D”)
Part Number : 800-MS1
BEP 800-MS2 Battery Management Panel - Twin Engines
Three Battery Banks
The 800-MS2 Panel is designed for power boats 10 to 12m (32.9 to 39.5’)
with twin engines.
Panels are supplied with a BEP 703 heavy duty negative bus, to
accommodate all negative connections at the battery. Also supplied with
a full label set for panel circuit breakers.
Features:
*Essential circuits, 24 hour supply
*Mains breakers for control panels, davit winches, or treatment systems
*Heavy duty breakers for anchor winches
*Powder coated aluminium panel
*Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
Dimensions: 281H x 463W x 75D mm (11.1H x 18.25W x 2.9D”)
Part Number : 800-MS2
BEP 800-MS3 Battery Management Panel - Twin Engines
Three Battery Banks (Large Diesel Engines)
The 800-MS3 Panel is designed for power boats 12 to 16M(39.5 to 52.5’)
with larger diesels.
Panels are supplied with a BEP 703 heavy duty negative bus, to
accommodate all negative connections at the battery. Also supplied with a
full label set for panel circuit breakers.
Features:
*Essential circuits, 24 hour supply
*Mains breakers for control panels, davit winches, or treatment systems
*Heavy duty breakers for anchor winches
*Powder coated aluminium panel
*Spare positions for additional battery switches and circuit breakers for extras such as radio batteries and genset batteries
Dimensions: 380H x 463W x 95D mm (15H x 18.25W x 3.75D”)
Part Number : 800-MS3
105
E l e c t r i c a l - Heavy Duty attery Switches
BEP 722 Electric Battery Switch 300 Amp
The 722 Electric Battery Switch fills a need on larger boats where cable runs
are becoming excessive and as a result voltage drop is a concern. The switch
is placed as close as possible to the batteries, and a short run of cable from
the start batteries to the starter motor. This can be remotely switched from
any convenient position in the boat utilising a key switch, Part No. 722-KS,
which is an optional extra.
The 722-300A Electric Battery Switch is also available in a non-electronic
format. The 722-NE-300A can be operated by any (On) Off (On) momentary
switch. A LED indicates whether switch is on and has a manual over-ride as
in the electronic version.
Specifications:
* Continuous Rating: 300 Amps DC
* Intermittent Rating: 400 Amps DC
* Cranking Rating: 1250 Amps DC
* Voltage Rating: 12 or 24 Volts DC
* Operation: On / Off
* Mounting surface
* Termination Stud Size: 2 x 10 mm (3/8 “)
* Tin plated copper studs and nuts
Dimensions: 102 x 102 x 107(h) mm
Part Number : 722
BEP 721 Heavy Duty Battery Selector Switch
The BEP 721 is a heavy duty Battery Selector Switch and offers a simple
economical way of separating two batteries.
* Continuous Rating: 350Amps DC between common B1 or B2
* Continuous Rating: 500 Amps DC between common B1 + B2
* Cranking Rating: 1500 Amps DC
* Voltage Rating: up to 48 Volts DC
* Operation: Selector-Battery 1-2-Both-off
* Termination Stud Size: 3 x 10mm(3/8”)
* Dimensions: 102 x 102 x 90mm(h)
Part Number : 721
BEP 720 Heavy Duty On/Off Battery Switch
The 720 Heavy Duty Battery Switch is rated at 600 amps continuous and 2500
amps cranking, making it well suited to larger vessels.
* Continuous Rating: 600 Amps DC
* Cranking Rating: 2500 Amps DC
* Voltage Rating: up to 48 Volts DC
* Operation: On / Off
* Termination Stud Size: 2 x 12 mm (1/2 inch)
* Dimensions: 102 x 102 x 90mm(h)
Part Number : 720
106
Electrical -
Battery Switches
BEP 720 Remote Operated Motorised Battery
Switch with Optical Sensor
The 720-MDO Version 8 has new installation options, whereby the motor/circuit
board can be fed from an independent 12V or 24V supply, so the switch contacts
are fully isolated and can:
* Control higher voltage circuits e.g. 36 or 48 volt circuits
* Control negative cables in circuits (e.g. full remote isolation in metal hulled
craft)
* Ensure engine electronics are fully isolated from all other circuits
* Still be operated in case the switched battery is flat
Part Number : 720-MDO
Note: Version 8 720-MDO’s can be identified by the 7 core connection cable with
3 cores terminated in the Wago plug, and 4 cores crimp-terminated.
BEP 701-MD Remote Operated Motorised Battery Switch - 275Amps
Due to the increased load requirements and large increases in the cost of
copper battery cable, the MD range of battery switches allows you to install
the battery switch very close to the battery, reducing cable lengths to starter
motor. They are also ideal for remote isolation of bow thrusters.
Features:
* Remote operation.
* Battery switch can be mounted alongside battery, reducing cable lengths
and cable sizes to starter motor. (Large cost saving in copper cables)
* Reduced installation labour, due to shorter battery cable runs.
* Manual over-ride option to meet CE requirements.
* Power Draw: Switch off: 12mA. Switch on: 15 mA, switch operating 120 mA
for 3 seconds @ 12 v nominal.
* LED status identification for remote control switch.
* Same capacities/specifications and mounting options as standard BEP
battery switches.
Part Number : 701-MD
BEP 701 Medium Duty On/Off Battery Switch
* Continuous Rating: 275 Amp DC
* Voltage Rating: up to 48 Volts DC
* Termination Stud Size: 2 x 10mm (3/8 “)
* Operation: On / Off
* Dimensions: 69 x 69 x 75mm (h)
Part Number : 701
107
E l e c t r i c a l - Battery Switches
BEP 701 Battery Switch - Panel Mount
*Continuous Rating: 275 Amps DC
*Intermittent Rating: 455 Amps DC
*Cranking Rating: 1250 Amps DC
*Voltage Rating: 48 Volts DC
*Operation: On/Off
*Mounting: Recessed or Surface
*Ignition protected
*Termination Stud Size: 2 x 10 mm (3/8 inch)
*Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
*Tin plated copper studs and nuts
Part Number : 701-PM
BEP 701-S Mini Battery Selector Switch
The 701-S is the most compact selector switch on the market and offers a simple
economical way of separating two batteries.
* Continuous Rating: 200 Amps DC
* Cranking Rating: 1000 Amps DC
* Voltage Rating: up to 48 Volts DC
* Operation: Selector 1-2-Both_off
* Termination Stud Size: 3 x 5/16”
* Dimensions: 69 x 69 x 75mm (h)
Part Number : 701-S
BEP 701-S Mini Battery Selector Switch - Panel
Mount
The 701-S is the most compact selector switch on the market and offers a simple
economical way of separating two batteries in a panel mount version.
*Continuous Rating: 200 Amps DC
*Intermittent Rating: 300 Amps DC
*Cranking Rating: 1000 Amps DC
*Voltage Rating: 48 Volts DC
*Operation: 1-2-Both-Off
*Mounting: Recessed or Surface
*Ignition protected
*Termination Stud Size: 3 x 5/16”
*Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
*Tin plated copper studs and nuts
Part Number : 701-S-PM
108
E l e c t r i c a l - Battery Switches
BEP 700 Easy Fit Battery Switch
The BEP 700 Easy Fit Battery Switch is designed to be recessed through panels up to
19mm thick, but can also easily be surface mounted.
* Continuous Rating: 275 Amp DC
* Voltage Rating: up to 48 Volts DC
* Termination Stud Size: 2 x 10mm (3/8 “)
* Operation: On / Off
* Dimensions: 69 x 69 x 110mm (h)
Part Number : 700
BEP Double Pole Battery Switch
720-DP Double pole battery switch has the same dimensions and features as the
720 battery switch. The 720-DP also meets the needs of vessels being built to
survey requirements where positive and negative supplies must be isolated at the
same time.
•Continuous Rating: 400 Amps DC
•Intermittent Rating: 525 Amps DC
•Cranking Rating: 1500 Amps DC
•Voltage Rating: 48 Volts DC
•Operation: On/Off two poles
•Mounting: Recessed or surface
•Termination Stud Size: 4 x 12mm (1/2”)
•Tin plated copper studs and nuts
•Dimensions: 102 x 102 x 90H (4 x 4 x 3.5H”)
•Ignition protected
Part Number : 720-DP
SAFETY NOTE:
BEP recommends the 720-DP for isolating positive
and negative circuits. We do not recommend it for
switching house and start battery systems at the
same time. We recommend separate switches for
house and start for safety reasons. You may need
to isolate your engine battery in an emergency and
not your house battery, which typically powers the
communications.
BEP Key for 700 Switch
BEP Key for 700 Switch
Replacement BEP key for 700 switch
Replacement BEP key for 701 switch
Part Number : 700-KEY
Part Number : 701-KEY
109
E l e c t r i c a l - Emergency Paralell & VSS Switches
BEP 720 Remote Operated Motorised Emergency Parallel Switch
The 720-MDO-EP (Emergency Parallel Switch) provides remotely activated, high
current, emergency parallel connection of two battery banks for a 10 minute
period following activation of the remote switch. The motorised battery switch
allows the remote switch to be placed in a location convenient to the operator,
with the battery switch positioned to minimise voltage drop, saving weight and
installation cost.
*Continuous rating: 500 Amps DC -minimum 2x95mm² (2x 3/0) cables
*Intermittent rating: 700 Amps DC -minimum 2x95mm² (2x 3/0) cables
*Cranking rating: 2500 Amps DC -minimum 2x95mm² (2x 3/0) cables
*Maximum Voltage: 32 Volts DC (12V or 24V systems)
*Voltage Note: Both battery banks must be the same voltage, either 12V or 24V
*Operating Voltage: 8 to 32.0 Volts DC
*Operation: Manual On/Off, Auto On/Off
*Mounting: Recessed or surface
*Ignition protected: Meets UL 1107 standards
*IP Rating: IP65
*Stud Size: 2 x 12mm (1/2”)
*Materials: Tinned copper conductors/studs, stainless steel nuts, high temperature fibre reinforced plastics.
*Power draw: Off/Auto Off: 5mA @12V, 5.5mA @24V
*Auto On/On:8.0mA @12V, 12.0mA @24V
*Emergency Parallel:
*Remote switch activates parallel for 10 minute period.
*Pressing remote switch for 6 seconds, deactivates parallel function
Dimensions:
102 L x 102 W x 110 H mm, (4 x 4 x 4.33”)
Part Number : 720-MDO-EP
BEP 701 Dual Operation VSS and Emergency Parallel Switch
Features:
*Remote emergency parallel function:
The 701-MDVS and 720-MDVS can be operated through a momentary button on the
dash which will parallel the batteries for a preset time of 10 minutes. Once this 10
minutes has passed, if the voltage is up high enough for the voltage sensitive switch
to operate, it will stay engaged. If not, it will disengage.
*Engine run sensing:
VSR will engage when the voltage on either start or house battery reaches 13.7 volts.
If the combined battery voltage drops below 13.0 volts and the engine is not running,
after 5 seconds the contacts will open and stay open until the start or house battery
voltage exceeds 13.7 volts. If the combined battery voltage drops below 12.2 volts and
the engine is running, after 5 minutes the contacts will open and stay open until the
start or house battery voltage exceeds 13.7 volts. If voltage drops below 13 volts and
stays above 12.2 volts on either start or house battery while engine is running, the
VSR will stay engaged. (12V example)
*Manual over-ride option.
*Dual battery sensing.
*The advantages of using a high current VSR is that it will cover your dual battery charging requirements and emergency parallel operation
in one unit.
Dimensions: 68 L x 68 W x 101 H mm (2.7 x 2.7 x 4”)
Part Numbers :
701-MDVS - 12V Switch
701-MDVS - 24V Switch
110
E l e c t r i c a l - Digital Voltage Sensing Relay (DVSR)
BEP DVSR 140 Amp - 12/24 Volt
The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery
banks from a single charging source. When the voltage on the start battery rises to a
charged level, the DVSR engages allowing the 2nd battery to charge. When charging
stops and voltage falls, the DVSR will disengage, isolating the two batteries from each
other. Dual sensing functionality enables the sensing of two battery banks, allowing
two way charging.
Advantages of fitting a VSR over conventional charge (diode isolators).
* Easy 3 wire connection at the battery. No need to bypass existing alternator wiring.
* VSRs have no volt drop. Conventional diode isolators incur a minimum of 0.6 volt drop.
* Compact size - No large heat sink
* Cost effective solution
Dimensions:
69L x 69W x 50H mm
Part Number : 710-140A
BEP Key Switch Control for MD Motorised Switches
For the remote operation of the 701-MD and 720-MDO motorised battery switch range. It can
be mounted stand-alone or as a component of the Contour Connect range.
Dimensions: 68 x 68mm (2.7 x 2.7”)
Works with 12v or 24v installations of BEP Marine motorised switches.
Part Number : 80-724-0006-00
BEP Remote Emergency Parallel Switch for MD
Motorised Switches
For the remote operation of 701-MDVS, 80-701-0018-00, 720-MDVS/MDVSO, and 720-MDO-EP
motorised battery switches.
This momentary switch is used to activate the built-in 10 minute emergency parallel function
of the BEP Marine battery switches, and can be placed within easy reach of the operator. The
remote switch also features an LED, which shows the battery switch status.
Dimensions: 68 x 68mm (2.7 x 2.7”)
Works with 12v or 24v installations of BEP Marine motorised switches.
Part Number : 80-724-0007-00
111
E l e c t r i c a l - DC Circuit Breaker Panels - No Meters
BEP 4 Way Circuit Breaker Panel 900
12 Volt DC
1 x 5 Amp Circuit Breaker
2 x 10 Amp Circuit Breakers
1 x 15 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
* Includes label sheet
Part Numbers : 900
BEP 8 Way Circuit Breaker Panel 901
12 Volt DC
2 x 5 Amp Circuit Breakers
2 x 10 Amp Circuit Breakers
3 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 200 x 127 x 65 for the 901V (Vertical)
Dimensions (mm):115 x 239 x 65 for the 901H (Horizontal)
Part Numbers : 901H (Horizontal) or 901V (Vertical)
BEP 12 Way Circuit Breaker Panel 902
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 185 x 127 x 65 for the 902NMV (Vertical)
Dimensions (mm): 115 x 351 x 65 for the 902NMH (Horizontal)
Part Numbers : 902NMH (Horizontal) or 902NMV (Vertical)
112
E l e c t r i c a l - DC Circuit Breaker Panels - No Meters
BEP 16 Way Circuit Breaker Panel 904
12 Volt DC
4 x 5 Amp Circuit Breakers
5 x 10 Amp Circuit Breakers
5 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 370 x 127 x 65 for the 904NMV (Vertical)
Dimensions (mm): 115 x 463 x 65 for the 904NMH (Horizontal)
Part Numbers : 904NMH (Horizontal) or 904NMV (Vertical)
BEP 24 Way Circuit Breaker Panel 905
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 285 x 239 x 65 for the 905NMV (Vertical)
Dimensions (mm): 200 x 351 x 65 for the 905NM (Horizontal)
Part Numbers : 905NM (Horizontal) or 905NMV (Vertical)
BEP 32 Way Circuit Breaker Panel 906
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 370 x 239 x 65 for the 906NMV (Vertical)
Dimensions (mm): 200 x 463 x 65 for the 906NMH (Horizontal)
Part Numbers : 906NMH (Horizontal) or 906NMV (Vertical)
113
E l e c t r i c a l - DC Circuit Breaker Panels - Analogue Meters
BEP 12 Way Circuit Breaker Panel
- with Analogue Meter
12 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
Dimensions (mm): 200 x 239 x 65
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
All analogue panels supplied with one shunt, extra shunts ordered separately.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : 902A
BEP 16 Way Circuit Breaker Panel
- with Analogue Meter
12 Volt DC
4 x 5 Amp Circuit Breakers
5 x 10 Amp Circuit Breakers
5 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 295 x 239 x 65
All analogue panels supplied with one shunt, extra shunts ordered
separately.
All panels available in 12 or 24V configuration. Part number shown is for
12V backlighting. If 24V is required, please specify when ordering.
Part Number : 904A
BEP 24 Way Circuit Breaker Panel
- with Analogue Meter
12 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 295 x 351 x 65
All analogue panels supplied with one shunt, extra shunts ordered separately.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : 905A
114
E l e c t r i c a l - DC Circuit Breaker Panels - Analogue Meters
BEP 32 Way Circuit Breaker Panel
- with Analogue Meter
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 295 x 463 x 65
All analogue panels supplied with one shunt, extra shunts ordered separately.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : 906A
BEP 32 Way Circuit Breaker Vertical Panel
- with Analogue Meter
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 455 x 239 x 65
All analogue panels supplied with one shunt, extra shunts ordered separately.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : 906AV
BEP 48 Way Circuit Breaker Panel
- with Analogue Meter
12 Volt DC
12 x 5 Amp Circuit Breakers
15 x 10 Amp Circuit Breakers
15 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breakers
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 380 x 463 x 65
All analogue panels supplied with one shunt, extra shunts ordered separately.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : 907A
115
E l e c t r i c a l - DC Circuit Breaker Panels - Digital Meters
BEP 12 Way Circuit Breaker Panel
- with Digital Meter
12 or 24 Volt DC
3 x 5 Amp Circuit Breakers
4 x 10 Amp Circuit Breakers
4 x 15 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 380 x 127 x 65
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
Part Number : 902D
BEP 20 Way Circuit Breaker Panel
- with Digital Meter
12 or 24 Volt DC
5 x 5 Amp Circuit Breakers
6 x 10 Amp Circuit Breakers
7 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated
aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 200 x 351 x 65
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
Part Number : 903D
BEP 24 Way Circuit Breaker Panel
- with Digital Meter
12 or 24 Volt DC
5 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 380 x 239 x 65
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
Part Number : 905DV
116
E l e c t r i c a l - DC Circuit Breaker Panels - Cruiser Series
BEP 32 Way “Cruiser Series” Yacht Circuit
Breaker Panel - with Digital Meter
12 or 24 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Yacht - Standard dipiction; steaming light, deck light, port and starboard
navigation lights, stern light, masthead light, tri-colour and two bilge pumps.
Dimensions (mm): 380 x 351 x 65
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
Part Number : NC32YD
BEP 36 Way “Cruiser Series” Launch Circuit
Breaker Panel - with Digital Meter
12 or 24 Volt DC
8 x 5 Amp Circuit Breakers
12 x 10 Amp Circuit Breakers
12 x 15 Amp Circuit Breakers
2 x 20 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Launch - Standard dipiction; steaming light, port and starboard navigation
lights, stern light and three bilge pumps.
Dimensions (mm): 380 x 351 x 65
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
Part Number : NC36LD
117
E l e c t r i c a l - DC Circuit Breaker Panels - Millennium Series
BEP 28 Way Millennium Circuit Breaker Panel
- with Digital Meter
12 Volt DC
8 x 5 Amp Circuit Breakers
8 x 10 Amp Circuit Breakers
8 x 15 Amp Circuit Breakers
2 x 20 Amp Circuit Breakers
2 x 30 Amp Circuit Breakers
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 370 x 239 x 65
Compact sizing.
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : M28D
BEP 32 Way Millennium Circuit Breaker Panel
- with Digital Meter
12 Volt DC
7 x 5 Amp Circuit Breakers
11 x 10 Amp Circuit Breakers
11 x 15 Amp Circuit Breakers
1 x 20 Amp Circuit Breaker
1 x 25 Amp Circuit Breaker
1 x 30 Amp Circuit Breaker
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 285 x 351 x 65
Compact sizing.
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : M32D
118
E l e c t r i c a l - DC Circuit Breaker Panels - Millennium Series
BEP 44 Way Millennium Circuit Breaker Panel
- with Digital Meter
12 Volt DC
10 x 5 Amp Circuit Breakers
14 x 10 Amp Circuit Breakers
14 x 15 Amp Circuit Breakers
3 x 20 Amp Circuit Breakers
1 x 25 Amp Circuit Breaker
2 x 30 Amp Circuit Breakers
* Marine Grade powder coated
aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 370 x 351 x 65 for M44D (Vertical)
Dimensions (mm): 285 x 463 x 65 for M44DH (Horizontal)
Compact sizing.
Battery monitoring using BEP multifunction meter (voltage on 3 battery
banks, charge, discharge amsp and amp-hours remaining on main
battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
All panels available in 12 or 24V configuration. Part number shown is for
12V backlighting. If 24V is required, please specify when ordering.
Part Numbers : M44DH (Horizontal) or M44D (Vertical)
BEP 56 Way Millennium Circuit Breaker Panel
- with Digital Meter
12 Volt DC
12 x 5 Amp Circuit Breakers
18 x 10 Amp Circuit Breakers
18 x 15 Amp Circuit Breakers
4 x 20 Amp Circuit Breakers
2 x 25 Amp Circuit Breakers
2 x 30 Amp Circuit Breakers
* Marine Grade powder coated aluminium
* Airpax circuit breaker
* Stylish Contour Design facia
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards
Dimensions (mm): 455 x 351 x 65
Compact sizing.
Battery monitoring using BEP multifunction meter (voltage on 3 battery banks,
charge, discharge amsp and amp-hours remaining on main battery bank.
All Digital panels are supplied with 450A - 50mV shunt.
All panels available in 12 or 24V configuration. Part number shown is for 12V
backlighting. If 24V is required, please specify when ordering.
Part Number : M56D
119
E l e c t r i c a l - DC Circuit Breaker Panels
BEP Contour Connect Circuit Protection Module
The CC–804 is equipped to cover essential circuits requirements
(bilge, pumps etc) and is fitted with one 50amp CB for DC mains or
treatment systems. It is also fitted with a 135amp 185 Series CB for
anchor windlass. The CC–804 compliments the other modules
for either single or dual engine installations.
Module dimension:
166mm(6.5”) L x 106mm (4.2”) W x 55mm (2.2”) D
Cutout dimension:
146mm(5.75”) L x 86mm(3.4”) W
Part Number : CC-804
BEP Contour Connect Circuit Breaker Module
The CC-807T is supplied pre-wired and fitted with 2 x 5amp, 2 x
10amp, 3 x 15amp and 1 x 20amp toggle circuit breakers. Supplied
with SET-CC-1 label sheet and back cover to enclose exposed
terminals. An economical 8 way circuit breaker panel option.
Stackable for vertical or horizontal mounting.
Dimensions:
166mm (6.5”) L x 106mm (4.2”) x W 55mm (2.2”) D
Cutout dimension:
146mm (5.75”) L x 86mm (3.4”) W
Part Number : CC-807T
BEP Contour Connect Push to Reset and Toggle Circuit Breaker Module
The CC-807T-PR is supplied pre-wired and fitted with 2 x 10amp,
and 2 x 15amp toggle
circuit breakers and 2x 10amp and 2 x15amp push reset circuit
breakers. Supplied with SET-CC-1 label sheet and back cover to
enclose exposed terminals.
Dimensions:
166mm (6.5”) L x 106mm (4.2”) x W 55mm (2.2”) D
Cutout dimension:
146mm (5.75”) L x 86mm (3.4”) W
Part Number : CC-807T-PR
120
E l e c t r i c a l - Spray Proof Marine Switch Panels
BEP 3 Way Spray Proof Switch Panel
3 Way spray proof switch panel with 16Amp power socket.
*Compact Panel size.
*Sprayproof in-line fuse holders with fuses are included with all compact
models.
*Waterproof power sockets three way & five way only.
*Power socket rated at 16A.
*Waterproof to IP56.
*Available in two colours: black or white.
Panel dimension:
95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H
Part Numbers : 900-3WPS (Black) or 900-3WPSW (White)
BEP 4 Way Spray Proof Switch Panel
4 Way spray proof switch panel.
*Compact Panel size.
*Sprayproof in-line fuse holders with fuses are included with all compact models.
*Waterproof to IP56.
*Available in two colours: black or white.
Panel dimension:
95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H
Part Numbers : 900-4WP (Black) or 900-4WPW (White)
BEP 5 Way Spray Proof Switch Panel
5 Way spray proof switch panel with 16Amp power socket.
*Compact Panel size.
*Sprayproof in-line fuse holders with fuses are included with all compact models.
*Waterproof power sockets three way & five way only.
*Power socket rated at 16A.
*Waterproof to IP56.
*Available in two colours: black or white.
Panel dimension:
95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H
Part Numbers : 900-5WPS (Black) or 900-5WPSW (White)
BEP 6 Way Spray Proof Switch Panel
6 Way spray proof switch panel.
*Compact Panel size.
*Sprayproof in-line fuse holders with fuses are included with all compact models.
*Waterproof to IP56.
*Available in two colours: black or white.
Panel dimension:
95mm(3.7”) L x 107mm (4.25”) W x 75mm (2.9”) H
Part Numbers : 900-6WP (Black) or 900-6WPW (White)
121
E l e c t r i c a l - Marine Switch Panels
BEP 6 Way Contour Spray Proof
Switch Panel
The CSP6 panel range comes in 3 models. All models are backlit and are
spray proof.
Three models are available for different installation applications
*Switches protected by high quality neoprene rubber boots
*Green LED Back-lit labels
*Red LED’s for systems on
*Waterproof to IP56 rating
*Removable cover plate over switches conceals screws and water drain
*Switch current rating 20Amps DC
* Panels are supplied standard with label set
Panel dimension:
158mm(6.25”) L x 112mm (4.4”) W x 75mm (2.5”) H
Part Numbers :
CSP6 (Includes 6 switches unfused for installation where separate fused
supply is available).
CPS6-F (Includes 6 switches and 3 inline fuse holders with fuses behind
panel).
CPS6-PTC (Fuses are soild state resettable fuses which change to a high
resistance device on over-current. The panel is supplied with 6 x 9A PTC
fuses mounted internally).
BEP Micro Series
900-2WP
*Labels backlit with green LED changing to red when switch is on.
*Full range of text or graphical labels available.
*Mix’n’match LED’s and switches to suit your requirements.
The MICRO range offers the unique ability to select the size & orientation of switch panels
by adding the compact modules together horizontally or vertically.
Dimensions: 86mm(3.4”) L x 58mm (2.3”) W x 28mm (1.2”) H
900-2WPMOM
900-SOP
2 x 2 way switches.
Part number : 900-2WP
900-BA
900-2WPOFO
1 x 2 way switch,
1 x 3 way double pole switch.
Part number : 900-2WPOFO
1 x 2 way switch,
1 x 3 momentary switch.
Part number :
900-2WPMOM
122
2 x 10mm LEDs showing
systems in operation.
Part number : 900-SOP
Bilge alarm and pump control panel includes: 1 on/off/on switch for
auto manual control; 1 warning light and alarm for high water level.
(Float switch sold separately).
Part number : 900-BA
E l e c t r i c a l - Marine Switch Panels
BEP Contour Interior Switch - Single
The Contour Interior switch can be either surface or recess mounted. The interior switch is
supplied with a three terminal on/on switch which can be used for on/off circuits or two way light
installations.
For applications such as shower drain pumps or electric toilets.
Rated at 10A DC.
Backlit label with label with systems on indicator.
All switches include a label sheet.
Dimensions: 60mm(2.4”) L x 30mm (1.2”) W x 18mm (0.75”) H
Part number : 1100-BK
BEP Contour Interior Switch - Double
The Contour Interior switch can be either surface or recess mounted. The interior switch is
supplied with a three terminal on/on switch which can be used for on/off circuits or two way light
installations.
For applications such as shower drain pumps or electric toilets.
Rated at 10A DC.
Backlit label with label with systems on indicator.
All switches include a label sheet.
Dimensions: 91mm(3.6”) L x 30mm (1.2”) W x 18mm (0.75”) H
Part number : 1101-BK
BEP Contour Exterior Switch - Single
The Contour Interior switch can be either surface or recess mounted. The interior switch is
supplied with a three terminal on/on switch which can be used for on/off circuits or two way light
installations.
For applications such as shower drain pumps or electric toilets.
Rated at 20A DC.
Backlit label with label with systems on indicator.
All switches include a label sheet.
Dimensions: 60mm(2.4”) L x 30mm (1.2”) W x 18mm (0.75”) H
Part number : 1100-BK-TS
BEP Contour Exterior Switch - Double
The Contour Interior switch can be either surface or recess mounted. The interior switch is supplied
with a three terminal on/on switch which can be used for on/off circuits or two way light installations.
For applications such as shower drain pumps or electric toilets.
Rated at 20A DC.
Backlit label with label with systems on indicator.
All switches include a label sheet.
Dimensions: 91mm(3.6”) L x 30mm (1.2”) W x 18mm (0.75”) H
Part number : 1101-BK-TS
123
E l e c t r i c a l - Battery Distribution Accessories
BEP 32111 - Toggle
Switch
BEP Splash Proof
Boot
Current Rating:
20 Amps @ 12 or 24 Volt DC
For metal BEP toggle switches.
Part Numbers :
32111 On/Off
32113 On/On
32114 On/Off/On
32115On/Off/(On)
32120(On)/Off/(On)
32123 (On)/Off/(On) Double Pole
NOTE: BEP switches only!
Part Number : M331
BEP Insulated Stud (single) - 6mm
BEP Insulated Stud (single) - 8mm
6mm tinned copper stud with high temperature plastic base
8mm tinned copper stud with high temperature plastic base
Available for Positive or Negative.
Available for Positive or Negative.
Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H)
32mm fixing hole centres.
Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H)
32mm fixing hole centres.
Part Numbers :
IS-6MM-1R - Positive - Red
IS-6MM-1 - Negative - Black
Part Numbers :
IS-8MM-1R - Positive - Red
IS-8MM-1 - Negative - Black
BEP Insulated Stud (single) - 10mm
BEP Insulated Stud Covers (10mm)
10mm tinned copper stud with high temperature plastic base
BEP Insulated stud cover.
Stud covers push securely over the threaded stud covering to
ABYC standards.
To suit 10mm studs.
Red or Black colour option.
Available for Positive or Negative.
Dimensions: 44mm (L) x 18mm (W) x 35.8mm (H)
32mm fixing hole centres.
Part Numbers :
IS-10MM-1R - Positive - Red
IS-10MM-1 - Negative - Black
124
Part Numbers :
Black - ISC-10/BK
Red - ISC-10/R
E l e c t r i c a l - Battery Distribution Accessories
BEP Insulated Dual Studs - 6mm
BEP Insulated Dual Stud linked -10mm
BEP Insulated dual stud 6mm, Black
BEP Insulated dual stud linked, 10mm Black
6mm tinned copper stud with
high temperature plastic base
10mm tinned copper stud with
high temperature plastic base
Dimensions: 42.25mm (L) x 36mm
(W) x 31mm (H)
25.5mm stud centres.
36mm fixing hole centres.
Dimensions: 42.25mm (L) x 36mm
(W) x 31mm (H)
25.5mm stud centres.
36mm fixing hole centres.
Part Number : IS-6MM-2L
Part Number : IS-10MM-2L
BEP Insulated Dual Studs -10mm &
8mm
BEP Insulated Dual Stud Cover (6mm)
BEP Insulated dual stud, 10mm
and 8mm, Black
10mm and 8mm tinned copper
stud with high temperature
plastic base. Designed for
Yamaha engine installations
BEP Insulated dual stud cover.
Stud covers push securely over the threaded stud covering to
ABYC standards.
To suit 6mm studs.
Red or Black colour option.
Part Numbers :
Black - ISC-6-2
Red - ISC-6-2R
Dimensions: 42.25mm (L) x 36mm
(W) x 31mm (H)
25.5mm stud centres.
36mm fixing hole centres.
Part Number : IS-10MM-8MM
BEP 702 Distribution Studs
BEP 702 Dual Distribution Stud
The Contour Distribution Stud allows terminating of heavy duty
cables for one or more connections.
Contour lock mouldings with removable side plates allow for
connections from all sides.
The Contour Distribution Stud allows terminating of heavy duty
cables for one or more connections.
Contour lock mouldings with removable side plates allow for
connections from all sides.
Two sizes available:8mm or 10 mm
702-2S was designed specifically for transom areas for
connecting battery cables from outboards. It also has many other
applications where heavy duty positive and negative connections
need to be terminated.
Dimensions: 69mm (L) x 69mm (W) x 50mm (H)
Part Numbers :
702 (10mm Stud)
702-8 (8mm Stud)
Stud size: 10 mm (3/8 in)
Dimensions: 69mm (L) x 69mm (W)
x 50mm (H)
Part Number : 702-2S
125
E l e c t r i c a l - Battery Distribution Accessories
BEP 704 Distribution Stud
The 704-4S was designed for multiple heavy duty connections
which need to be isolated from each other. This model completes
the range of heavy duty connectors and meets ABYC standards
for exposed terminals.
Dimensions: 138mm (L) x 69mm (W) x 50mm (H)
Stud size: 10mm (3/8 in) x 4
Stud size: 10 mm (3/8 in)
Part Number : 704-4S
BEP Heavy Duty Distribution Bus
- 300A
BEP 703-300A Distribution Bus is designed to take loads from
Heavy Duty Starter Circuits. Taller cover allows for more bulky
cables and lugs.
Dimensions: 138mm (L) x 69mm (W) x 50mm (H)
Stud Size: 4 x 10mm
Current Rating: 300A
Part Number : 703-300A
BEP Heavy Duty Distribution Bus
- 500A
BEP 703-500A Distribution Bus is designed to take loads from
Heavy Duty Starter Circuits. Taller cover allows for more bulky
cables and lugs.
Dimensions: 138mm (L) x 69mm (W) x 75mm (H)
Stud Size: 3 x 10mm
Current Rating: 500A
Part Number : 703-500A
BEP Terminal Blocks
The 708 links are designed for space saving interconnections of terminals
when battery distribution modules are linked together. Four standard solid links
are available for interconnection of the 701 battery switch with other Battery
Distribution products and two larger links which are intended for the heavy duty
battery switch. See illustration for link applications
Part numbers :
708-42.5 (Distance between centres: 43mm, Hole diameter: 10mm, 275A)
708-54.5 (Distance between centres: 55mm, Hole diameter: 10mm, 275A)
708-64.5 (Distance between centres: 65mm, Hole diameter: 10mm, 275A)
708-68.5 (Distance between centres: 69mm, Hole diameter: 10mm, 275A)
708-62-12MM (Distance between centres: 62mm, Hole diameter: 12mm, 550A)
708-102-12MM (Distance between centres: 102mm, Hole diameter: 12mm,
550A)
126
Diagram depicts typical Master Switch
setup using 708 Terminal Links.
E l e c t r i c a l - Battery Distribution Accessories
BEP Bus Bars
BEP Dual Bus Bars
Features:
* 4mm (5/32”) stainless steel screws with shake proof washers.
* 6mm (1/4”) input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids
accidential shorting on aluminium backing plates.
Features:
* Twin bus bar rows
* 4mm (5/32”) stainless steel screws with shake proof washers.
* 6mm (1/4”) input studs
* 100A current rated
* Tin plated Brass
* Insulated mounting base with recessed mounting holes avoids
accidential shorting on aluminium backing plates.
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic
Dimensions: 117 (L) x 15 (W) x 29 (H) mm (6 Way Bus Bar)
Dimensions: 177 (L) x 15 (W) x 29 (H) mm (12 Way Bus Bar)
Dimensions: 204 (L) x 24 (W) x 29 (H) mm (24 Way Bus Bar)
Part Numbers :
BB-6W (6 Way Bus Bar)
BB-12W (12 Way Bus Bar)
BB-24W-2S (24 Way Bus Bar)
Specifications:
* Voltage Rating: 300 Volts AC Max & 48 Volts DC Max
* Bus material: Tin plated brass
* Stud material: Tin plated brass
* Screw Material: Stainless Steel
* Base material: Flame retardant plastic
Dimensions: 100 (L) x 42 (W) x 32 (H) mm (Twin 6 Way Bus Bar)
Dimensions: 160 (L) x 42 (W) x 32 (H) mm (Twin 12 Way Bus Bar)
Part Numbers :
BB-6W-2NC (Twin 6 Way Bus Bar)
BB-12W-2NC (Twin 12 Way Bus Bar)
BEP Bus Bar - 150Amps
The multi bus bars enables either positive and negative (DC) buses on one block or earth and neutral
(AC) buses on one block.
Features
*4mm (5/32”) stainless steel screws with shake proof washers.
*4 x 6mm (1/4”) input studs
*Tin plated Brass
*Screw Material: Stainless Steel
*Base material: Flame retardant plastic
*Insulated mounting base with recessed mounting holes
avoids accidential shorting on aluminium backing plates.
Specifications:
*Bus material: Tin plated brass
*Stud material: Tin plated brass
*Voltage Rating: 300 Volts AC
Max & 48 Volts DC Max
Part Number : BB-4S-150A
BEP Bus Bar Covers
The Insulated Bus Bar Covers are designed to be a push fit, and to securely cover exposed studs
and terminal lugs. Conforming to ABYC standards. They come in 3 different sizes to cover the
range and in 2 colours, red for positive and black for negative to distinguish the Bus Bars.
Features:
•Flame resistant flexible plastic.
•Colour coded for polarity.
•Unique push on fit.
Part Numbers :
BBC-1 (BEP Bus Bar cover 6 way – Black)
BBC-2 (BEP Bus Bar cover 12 way – Black)
BBC-3 (BEP Bus Bar cover 24 way – Black)
BBC-1R (BEP Bus Bar cover 6 way – Red)
BBC-2R (BEP Bus Bar cover 12 way –Red)
BBC-3R (BEP Bus Bar cover 24 way – Red)
127
E l e c t r i c a l - Battery Distribution Accessories
BEP Contour Heavy Duty Circuit
Breakers
BEP 24 hour Essential Circuit
Breaker Module (4W)
705 Contour Circuit Breaker
HD allows switchable
protection for heavy duty
circuits like Windlasses
or Davit winches utilising
Bussmann Heavy Duty
thermal circuit breakers. Modular sizing with contour lock
moulding allows easy grouping. LED to indicate circuit is on.
The 706-4W 24hr service
module consists of 1 x
5amp and 3 x 15amp push
to reset Carling CLB Series
thermal circuit breakers.
Suitable for essential
circuits such as bilge pump
auto float switch supplies
and stereo memory circuits. The push to reset function ensures
essential 24hr circuits cannot be switched off inadvertently.
This is contained in the contour lock double module.
Five standard ratings available. 50Amps - 150Amps
Stud Size: 6mm
Dimensions: 138mm (L) x 69mm (W) x 75mm (H)
Part Numbers :
Rating:
705-50A 50 Amp
705-80A80 Amp
705-100A 110 Amp
705-135A 135 Amp
705-150A 150 Amp
BEP 707 Circuit Breaker Module
Offers provision for three
circuit breakers ideal for
medium duty loads, like
waste treatment systems
and electric toilets.
Supplied with 1 x 50A and 2
x 25A Circuit Breakers.
Dimensions: 138 (W) x 69 (D) x 75mm (H)
Dimensions: 180mm (L) x 69mm (W) x 70mm (H)
Part Number : 706-4W
BEP 24 hour Essential Circuit
Breaker Module (2W)
706-2W 24 hour essential
circuit module. Designed for
smaller systems where only 2
circuit breakers are required.
Supplied with 2 x 10 amp
Carling CLB Series circuit
breakers.
Suitable for essential circuits
such as bilge pump auto float
switch supplies and stereo
memory circuits. The push to reset function ensures essential
24hr circuits cannot be switched off inadvertently. This is
contained in the contour lock single module
Dimensions: 69mm (L) x 69mm (W) x 70mm (H)
Part Number : 707
Part Number : 706-2W
BEP Fuse holder Heavy Duty
Airpax Single Pole Circuit Breakers
Allows fusing of heavy duty accessories (80-500 Amp)
Mounted in Contour lock mouldings with removable sides.
Meets ABYC Standards for
exposed terminals.
IEG magnetic circuit breakers provide reliable circuit protection
and accurate circuit control.
Dimensions:
138 x 69 x 50 mm
Stud size 10 mm
* Fuse not included. Sold
Separately. (See page 109
for sizes)
Part Number : 704-ANL
128
* Unaffected by Temperature
* ‘trip free’ action - means the
circuit will trip if overloaded even
if the handle is held in the ON
position.
Part Number: CBS-10A-SP CBS-15A-SP CBS-20A-SP CBS-30A-SP CBS-50A-SP Rating:
10 Amp
15 Amp
20 Amp
30 Amp
50 Amp
E l e c t r i c a l - Battery Distribution Accessories
BEP Surge Protection Module
Surge Protection Module. Protect your electronics from becoming damaged by harmful
high voltage spikes. When fitted to the battery supply these modules look for sudden
increases in voltage then switch into protection mode to absorb and suppress the high
energy spike.
Available in two modules - 12V or 24V DC
Dimensions: 69mm (L) x 69mm (W) x 50mm (H)
Part Numbers :
80-707-00004-00 - (Surge Protection Module 12v DC)
80-707-00005-00 - (Surge Protection Module 24v DC)
BEP Terminal Blocks
Ideal for isolated connections up to 30A.
Suitable for connecting tails from AC and DC panels.
Base material: Phenolic
Current rating: 30A
Max. voltage rating: 300V AC/DC
Screw size: 0.25” (6.3 mm)
Dimensions: 111mm (L) x 32mm (W) x 16mm (H) (6 Connections)
Dimensions: 169mm (L) x 32mm (W) x 16mm (H) (10 Connections)
Part Numbers : TB-118-6P (6 Connections) or TB-118-10P (10 Connections)
BEP Heavy Duty ANL Fuses
BEP Digital Ammeter Shunt
For use with BEP Heavy Duty ANL Fuse Holder - 704-ANL
For use with BEP digital ammeters. Also for use in the BEP
Ammeter Shunt Enclosure.
For analogue ammeter shunts please contact us for pricing.
80, 100, 150, 200, 250, 300, 355, 425 or 500 Amp options.
Part Numbers :
IP80A - 80Amp
IP250A - 250Amp
IP100A - 100Amp
IP300A - 300Amp
IP150A - 150Amp
IP400A - 400Amp
IP200A - 200Amp
450A / 50mV shunt
Dimensions: 83mm (L) x 45mm (W) x
44mm (H)
Part Number : LB-450-50SHUNT
IP450A - 450Amp
BEP Ammeter Shunt Enclosure
The 711 feature modular sized contour lock mouldings, with removable side covers,
ensuring your shunt installation meets ABYC standards by covering all exposed terminals.
Dimensions: 138mm (L) x 69mm (W) x 50mm (H)
(Shunts ordered separately)
711 - takes 2 x mini shunt or 1 maxi shunt
Part Number : 711
129
E l e c t r i c a l - Monitoring
BEP DC Systems Monitor (DCSM)
DC Systems Monitor (DCSM) Designed and manufactured by BEP,
these state of the art full colour monitors are made to meet the
systems monitoring requirements of today’s modern vessel and
recreational vehicle. Complex and DC electrical installations on
board are becoming more common place. Additionally the increase
in tank monitoring requirements for fuel, fresh, grey and black water,
accurate monitoring of these systems is essential. The DCSM display
features clear, extra large type face. This allows for more detailed
on-screen information and increased clarity. The screen has back
lighting for easy night time viewing. See sample screens below.
Specifications:
*2.8” Colour QVGA LCD
*Input voltage 8-32VDC
*Dimensions: Width 90mm x Height 100mm
*Backlit keypad
Monitors:
*Charge/discharge amps for two banks
*Capacity remaining in A/h and %
*Battery condition
*Tank fluid level
*Circuit status
Features:
*8 Generic, user configurable inputs
*Programmable high/low audio /visual alarms for volts, amps and tank levels
*Backlit keypad and dimmable screen
*Can be panel or surface mounted
Comes with 1 x Shunt and 5m cable.
Part Number : 600-DCSM
Display Type:
Configure the DCSM to show
the data in analogue, digital and
graphic form.
Tank Level:
View tank level information for
multiple tanks in numeric and
graphic forms. Resettable when
leaving the boat.
130
Circuit Status:
View the status of important
circuits (on/off) In graphic and
numeric form.
DC Power Meter:
*Displays voltages of multiple
battery banks (0-32VDC).
*Displays charge and discharge
(amps) of 2 battery banks.
*Displays battery capacity in amp
hours.
*High/Low level alarms
E l e c t r i c a l - Monitoring
BEP Ultrasonic Tank Sender - No Moving Parts
*Handles common outputs – 240-33, 10-180, Vetus 10-300 and 0-5 V tanks from BEP, Teleflex, Faria, VDO and many other popular
instrument brands. (When connecting to non-adjustable gauges the TS1 must be pre-calibrated)
*Low Profile Design and standard SAE 5 hole mounting pattern, allowing it to be retrofitted to practically all other sender brands.
*Can be set for tank dimensions via computer using BEP Marine’s proprietary TS1 software, avoiding experimental tank filling on
site.
*Connects directly to the BEP 600-TLM-N digital tank monitor when configured to a 0-5 V output.
*Is set for 0-2000 mm depth off the shelf (not suitable for tank depths less than 200 mm)
*Operating voltage: 10-32 V
*Current draw: 25 mA with 5 V gauge output
*Measurement method: Acoustic sonic measurement
*Tank depth: 0–2000 mm (6.5 ft)
*Accuracy Distance: 0–2000 mm (6.5 ft) at 2 mm accuracy
*Mounting: SAE 5 stud mounting pattern with gasket, seal and
screws (top mount only).
*Environmental temperature: 4–65 °C
*Chemical resistance: Petrol, diesel, water, toilet chemicals.
*Tank type style: Metal and plastic with non linear capacity.
*Works with petrol, diesel, fresh water, grey water and black water.
Part Number : TS1
…the most unique and sophisticated
system of any tank monitor tested…
the ultrasonic technology is extremely
accurate.
Practical Sailor Magazine, July 2009
BEP LED Tank Level Monitor
The 600-TG offers economical monitoring for fresh or grey water
tanks (plastic or fibreglass only). Using 600-TGSK strategically
mounted well nuts will give 4 tank levels. Supplied with one sender
kit. Second sender ordered separately.
Also available is the RV-TS Tank sender. Only one hole is required for
installation, the sender is sealed via external lock nuts. Only suits
tanks with maximum depth of 280mm.
Specifications:
* Voltage 12V DC
* Supplied with one 600-TGSK sender kit
Part Number : 600-TG
BEP Water Tank Sender Probe Kit
*Well nut hole size 3/8” (9 mm).
*Cable length 5 m.
*One kit supplied with 600-TG.
*For use with fibreglass or plastic freshwater tanks only (not for Petrol
or diesel).
*Suitable for tanks deeper than 10” (280 mm)
Part Number : 600-TGSK
131
E l e c t r i c a l - Gas Detectors
BEP Gas Detector 600-GD
The BEP Contour Matrix Gas Detectors are the product of continuing
research and development which BEP Marine Ltd devotes to their
product range. The BEP Detectors use microprocessor control to
ensure correct sensor sensitivity. The Detectors have the capability
to control two sensors which detect both LPG and Petrol, with visual
and audible alarms. There is a test switch to check operation of
sensors with indicators for fault detection.
The 600-GD will detect LPG, Petrol and CNG fumes. Supplied with
one sensor and has an option for a second sensor. Item # BL-SL-L
output for remote alarm and blower unit. 600-DG can be used on 12
or 24V systems.
Features:
* Operating Voltage 10 to 32 Volts DC
* Self testing capability
* Microprocessor control
* Provision for external alarm
* Provision for bilge blower
* Dual sensor capability
Specifications:
Voltage: 10V min to 32V max
Current Draw with 2 sensors: Total 350mA max
Alarm Sensitivity: 20% LEL (Lower Explosive limit)
Current at Outputs: 800mA max
Solenoid Draw: Pulse 700mA hold at 250mA
Dimensions: 66.5(H) x 88(W) x 17mm (D)
Supplied with one BL-SL-L sensor. (5m)
Part Number : 600-GD
BEP Gas Detector 600-GDL
Has the same features as the 600-GD, with the additional ability
to switch a valve on and off. The 600-GDL has a “pulse and hold”
feature which allows the solenoid valve to be opened, using full
power, and then reducing power to hold the valve in the open
position. This reduces power consumption and heat generated whilst
the valve is in the on position.
Features:
* Operating Voltage 10 to 32 Volts DC
* Self testing capability
* Microprocessor control
* Provision for external alarm
* Provision for bilge blower
* Dual sensor capability
Specifications:
Voltage: 10V min to 32V max
Current Draw with 2 sensors: Total 350mA max
Alarm Sensitivity: 20% LEL (Lower Explosive limit)
Current at Outputs: 800mA max
Solenoid Draw: Pulse 700mA hold at 250mA
Dimensions: 66.5(H) x 88(W) x 17mm (D)
Part Number : 600-GDL
132
Compatible with the VR-2.2 Solenoid
Valve and Regulator Kit.
E l e c t r i c a l - Gas Detectors
BEP Gas Shut Off Switch 600-LPG
The 600-LPG is a stand alone gas shut off system with no gas detection ability. To be
used in 12V systems.
If 24V is needed, please contact us for more information.
VR2.2 Solenoid Valve and Regulator Kit sold separately.
Part Number : 600-LPG
Solenoid Valve and Regulator Kit
Solenoid Valve
*Compatible with 600-GDL or Gas Detector or 600-LPG.
*Solenoid voltage: 12 V or 24 V
*Gas outlet: 3/8 BSP
*Gas inlet: POL Thread
*Current draw: 800 mA
*Current draw with GDL or PH-12V:
0.2 A
*Regulator Flow Rate: 3 kPa.
Compatible with 600-GDL or Gas
Detector or 600-LPG.
The SA296COMP-12V is suitable for
countries where VR2.2 is not
approved. The CE approved
SA296COMP-12V can be installed
by an approved gas installer using
approved components from within
specific markets.
12V operation (24V option is
available, please contact us for more information)
Uses 1/4” BSP thread.
Note: The VR2.2 may not comply in
some countries, and does not comply with USCG requirements.
Please check with your local gas installer. Not for sale in the
USA.
Part Number : VR2.2
Note: A separate regulator will need to be installed with the
SA296 valves.
Part Number : SA296COMP-12 12V
BEP Gas Detector with Built-In Sensor
600-GDRV
The Contour Matrix Gas Detectors are the product of continuing
research and development which BEP Marine Ltd devotes to their
product range. The BEP Detectors use microprocessor control to
ensure correct sensor sensitivity. The Detectors have the capability
to control two sensors which detect both LPG and Petrol, with
visual and audible alarms. There is a test switch to check operation
of sensors with indicators for fault detection.
BEP Gas Detector FD-2
The FD-2 is designed for an economic in-dash installation.
Features include clearly visible LED for safe and alarm mode, and
audible alarm with test function. Supplied with sensor (5 metre
cable) which is capable of detecting combustible gases.
Part Number : FD-2
600-GDRV Gas Detector uses the same sensor as the 600-GD
and GDL. The sensor is mounted in the front facia creating a
stand alone unit. the unit is designed to be surface mounted at
the lowest point in the vessel. The detector is equiped with a test
button and a sensor status light.
Specifications:
* Power Supply: 10-32VDC
* Alarm Sensitivity: 20% LEL
(Lower explosive limit)
* Current Draw: 70mA
(milliamps)
Part Number : 600-GDRV
Supplied with one BL-SL-L sensor. (5m)
133
Electrical
136. Battery
Chargers
CTEK XS 0.8 - 6 Step Battery
Charger 12V 0.8A
CTEK MXS 5 - 8 Step Battery
Charger - 12V 5.0A
CTEK MXS 10 - Universal Battery
Charger 12V 10A
CTEK M200 12V 15A Charger with
Night Mode
CTEK MXS 15 - 8 Step Battery
Charger 12V 15A
CTEK MXS 25 - 8 Step Battery
Charger 12V 25A
CTEK XT4000 - 8 Stage Battery
Charger 24V 4A
CTEK XT14000 - 8 Stage Battery
Charger 24V 14A
CTEK D250S Dual Battery Charger
DC/DC
CTEK Comfort Connect
Mastervolt ChargeMaster 25 Amp
Battery Charger
142. Inverters/
Chargers
MasterVolt 300 watt 12V Inverter
MasterVolt 500 watt 12V Inverter
MasterVolt Sine 800 Watt 12V
Inverter
MastervVolt Mass Combi 12/2000
Invert/Charger
MasterVolt Mass Combi 12/2500
Invert/Charger
134
144 Battery
& Electrical
Switches
Dual Battery Switch - 150A
Dual Battery Switch - 175A
Battery Switch with Capped Key
Capped Key
Key for 10097
Battery Switch
Toggle Switch - 2 Pin
Toggle Switch - 3 Pin
EPDM cap for switch
Toggle Switch - 2 Pin
Toggle Switch - 2 Pin
Momentary Panel Switch - TMC
Splashproof Switch with LED
Splashproof Switch
Splashproof Switch
Push Pull Switch
TMC Toilet Switch box with fuse
MaXtek Kill Switch Keys with
Lanyard
MaXtek Kill Switch with Coil
Lanyard
Fuse Holder Waterproof PVC
Ignition Starter Switch
Ignition Switch with Cap
Thermo Plastic Fuse Holder
Fuse Holder - for switch panel
LED Switch Panel Lights
147. Switch Panels
MaXtek 3 Way Switch Panel with
Lighter Socket
MaXtek 4 Gang - Fused Switch
Panel
MaXtek 6 Gang - Fused Switch
Panel
6 Gang Waterproof Switch Panel
6 Gang Splashproof Switch Panel
3 Gang Waterproof Switch Panel
MaXtek 4 Way Sprayproof Switch
Panel
MaXtek 5 Way Switch Panel with
Socket
MaXtek 6 Way Sprayproof Switch
Panel
3 Gang Wave Panel + Cig Socket
6 Gang Circuit Breaker Wave Panel
149. Bilge Pump
Switches
154. Bilge Blowers
& Fans
MaXtek Bilge Pump Switch
Automatic Float Switch - Lalizas
Sure Bail Float Switch
Bulkhead Mounted Bilge Blower
Inline Blower 3”
TMC In Line-Blower 3”
TMC In Line-Blower 4”
Bulkhead Blower - High Capacity 3680 L/Min
Cooling fan with Clip on mounting
Cooling fan with Suction Cup
149. Electrical
Accessories &
Marine Plugs
Circuit Breakers - Surface Mount Switchable
Deck Plugs and Sockets
MaXtek Cable Outlets
Stainless Steel 12V Marine
Terminal Socket
Lighter Style Plug or Socket
Marine Plug & Socket
Marine Plug - 12V
Marine Socket
Triple 12V/24V Outlet
Plug Male
Plug with Safety Ring 220-240V
Plug Female with Cover
151. Bus Bars &
Power Supplies
Power Distribution Bar - 6 Stud
Power Distribution Bar - 4 Stud
Power Distribution Bar - 12 Way (2
Stud + 10 Screw)
230VAC - 12V or 24V Adaptor
152. Battery
Accessories
Super Charge MRV70 12V
Allrounder Marine Battery
Battery Boxes
Battery Power Box
Bracket and Strap
Battery Strap
Battery Terminals - Pair
Jumpstart SP2
Battery Cable
8 Core Shielded Cable
Electrical Tape
135
E l e c t r i c a l - CTEK 12V Battery Chargers
CTEK XS 0.8 - 6 Step Battery Charger 12V 0.8A
Intelligent Electronic Charger
The XS 0.8 is easy to use and is fully automate requiring no setting adjustments.
* Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah
* Maintenance charging for batteries from 1.2Ah to 100Ah
* Maintenance pulse charging increases battery life and gives superb performance
* Charges even drained batteries up to 32AH
* Pulse recover of slightly sulphated batteries
* Low back current drain, low ripple and input voltage independent (170-260V)
* High efficiency: 85%
* Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals
* The charger can be connected for months, ideal for seasonal vehicles
* Compact design with mounting holes for permanent assembly
6 step Charge:
1. Desulphation
2. Bulk - Charging where 80% of the energy is returned.
3. Absorption - Final part of the charge up to 100%. The battery
voltage is kept constant at the set level, during which time the
current drops gradually.
4. Analyse - Charger analyses the voltage drop and tests the selfdischarge.
5. Float - Float is maintenance charge at constant voltage, keeping the
batteries at 100% charge.
6. Pulse - This keeps the battery in trim when not in use. The charger
can be connected for months at a time.
Ideal for watercraft including boats and jetskis.
Part Number : CTEKXS0.8
136
E l e c t r i c a l - CTEK 12V Battery Chargers
CTEK MXS 5 - 8 Step Battery Charger - 12V 5.0A
Intelligent Electronic Charger
The MXS 5.0 is easy to use and is fully automate requiring no setting adjustments.
* 8 step, fully automatic switch mode model
* Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 110Ah
* Maintenance pulse charging increases battery life and gives superb performance
* Charges even drained batteries
* Pulse recover of slightly sulphated batteries
* Three unique charging modes for use on small batteries, large batteries and a special cold mode that is also suitable for AGM batteries.
* Low back current drain, low ripple and input voltage independent (220-240V)
* High efficiency: 85%
* Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals
* The charger can be connected for months, ideal for seasonal vehicles
* Compact design with mounting holes for permanent assembly
8 step Charge:
1. Desulphation
2. Soft Start – Easy on the battery until charged sufficiently for bulk
3. Bulk - Charging where 80% of the energy is returned.
3. Absorption - Final part of the charge up to 100%. The battery voltage
is kept constant at the set level, during which time the current drops
gradually.
4. Analyse - Charger analyses the voltage drop and tests the selfdischarge.
5. Recondition – Restores deeply discharged open vented batteries.
6. Float - Float is maintenance charge at constant voltage, keeping the
batteries at 100% charge.
7. Maintenance – Float charging with constant voltage
8. Pulse - This keeps the battery in trim when not in use. The charger can
be connected for months at a time.
Part Number : CTEKMXS5
137
E l e c t r i c a l - CTEK 12V Battery Chargers
CTEK MXS 10 - Universal Battery Charger 12V 10A
The MXS 10 is an ideal battery charger for your caravan, car and boat.
Thanks to its SUPPLY mode the battery charger provides power even without a battery. The SUPPLY mode is indispensable when charging
the battery as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification that often
occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.
MXS 10 Features:
* Eight step, fully automatic switch mode model.
* Charges lead-acid batteries (WET, MF, GEL and AGM) from 20Ah to 200Ah.
* Maintenance charge to 300AH.
* Maintenance pulse charging increases battery life and gives superb
performance.
* Supply mode for float maintenance for 100 % state of charge.
* Charges even drained batteries.
* Pulse recover of slightly sulphated batteries.
* Four options: 14.4V, 14.7V, 13.6V/Supply and 15.8V/Boost.
* Low back current drain, low ripple and input voltage independent (170-260V).
* High efficiency: 85%
* Delivered with connection lead with clamps.
* The charger can be connected for months, ideal for seasonal vehicles.
* Compact design with mounting holes for permanent assembly.
* 2 year warranty.
Part Number : CTEKMXS10
CTEK M200 12V 15A Charger with Night Mode
The CTEK M200 (15A) is an economic 8-step, fully-automatic, switch mode battery charger that analyses, looks after, charges and
maintains all types of boat batteries. The M200 has been specially developed to make boat life safer and more convenient for today’s boat
owners.
CTEK M200 Features:
* Eight step, fully automatic switch mode model.
* Revives, charges, checks and maintains virtually all types of 12V lead-acid
batteries (WET, MF, GEL and AGM) from 28Ah to 300Ah.
* Night mode for silent charging at night time - when you select the night mode.
This mode derates the current charging the batteries which in-turn means the
unit doesn’t get so hot and therefore doesn’t need the internal fan running. The
night mode comes at the cost of removing the Recond mode from the chargers.
* 8.4mm eyelets instead of alligator clips on the end of the DC power cable.
* Desulphation mode with pulses.
* Soft start for severely discharged batteries.
* Recondition mode with controlled top charging recovers the capacity of a
severely discharged battery.
* Maintenance pulse charging increases battery life and gives superb performance.
* Charges even drained batteries.
* Temperature compensated for optimal charging voltage at all times.
* Low back current drain, low ripple and input voltage independent (170-260V).
* High efficiency: 85%
* The charger can be connected for months, ideal for seasonal vehicles.
* Compact design with mounting holes for permanent assembly.
* 5 year warranty.
Part Number : CTEKM200
138
E l e c t r i c a l - CTEK 12V Battery Chargers
CTEK MXS 15 - 8 Step Battery Charger 12V 15A
The CTEK XS15000 (15A) is an economic 8-step, fully-automatic, switch mode battery charger that analyses, looks after, charges and
maintains all types of batteries.
MXS 15 Features:
* Eight step, fully automatic switch mode model.
* Revives, charges, checks and maintains virtually all types of 12V lead-acid
batteries (WET, MF, GEL and AGM) from 50Ah to 300Ah.
* Desulphation mode with pulses.
* Soft start for severely discharged batteries.
* Recondition mode with controlled top charging recovers the capacity of a
severely discharged battery.
* Maintenance pulse charging increases battery life and gives superb performance.
* Supply mode for use as a power pack, battery backup (UPS) or float maintenance.
* Charges even drained batteries.
* Temperature compensated for optimal charging voltage at all times.
* Low back current drain, low ripple and input voltage independent (170-260V).
* High efficiency: 85%
* The charger can be connected for months, ideal for seasonal vehicles.
* Compact design with mounting holes for permanent assembly.
* 2 year warranty.
Part Number : CTEKMXS15
CTEK MXS 25 - 8 Step Battery Charger 12V 25A
The MXS 25 is the perfect choice for batteries that require quick charging, including caravans, boats and the workshop. The temperature
sensor adjusts the charge voltage to suit the battery’s temperature to guarantee effective battery charging in all climates. Using its
SUPPLY mode, the battery charger provides power even without a battery. The SUPPLY mode is indispensable when changing the battery
as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification that often occurs in deeply
discharged batteries. The battery thereby has its power restored and has a longer service life.
MXS 25 Features:
* Eight step, fully automatic switch mode model.
* Revives, charges, checks and maintains virtually all types of 12V lead-acid
batteries (Wet, MF, GEL and AGM) from 50Ah to 500Ah.
* Desulphation mode with pulses.
* Soft start for severely discharged batteries.
* Recondition mode with controlled top charging recovers the capacity of a
severely discharged battery.
* Maintenance pulse charging increases battery life and gives superb performance.
* Supply mode for use as a power pack, battery backup (UPS) or float maintenance.
* Charges even drained batteries.
* Temperature compensated for optimal charging voltage at all times.
* Low back current drain, low ripple and input voltage independent (170-260V).
* High efficiency: 85%
* The charger can be connected for months, ideal for seasonal vehicles.
* Compact design with mounting holes for permanent assembly.
* 2 year warranty.
Part Number : CTEKMXS25
139
E l e c t r i c a l - CTEK 24V Battery Chargers
CTEK XT4000 - 8 Stage Battery Charger 24V 4A
The essential maintenance charger for 24A systems on for your caravan, boat or industry application. The battery charger is well suited for
year-round use as it is IP65 Rated.
CTEK XT4000 Features:
* Eight step, fully automatic switch mode model.
* Revives, charges, checks and maintains virtually all types of 24V lead-acid batteries (WET, MF, GEL and AGM) from 8Ah to 100Ah, up to
250Ah maintenance.
* 5 year warranty.
Using the MULTI XT 4000 gives your battery an optimum service life and operational reliability.
Part Number : CTEKXT4000
CTEK XT14000 - 8 Stage Battery Charger 24V 14A
The MULTI XT 14000 is adapted for 24V batteries, which makes it perfect for buses, trucks, larger boats or the workshops that service
these vehicles. The SUPPLY mode means the battery charger provides power even without a battery. The SUPPLY mode is indispensable
when changing the battery as you avoid losing complicated program settings. Using RECOND mode, you can correct the acid stratification
that often occurs in deeply discharged batteries. The battery thereby has its power restored and has a longer service life.
CTEK XT14000 Features:
* Eight step, fully automatic switch mode model.
* Revives, charges, checks and maintains virtually all types of 24V lead-acid batteries (WET, MF, GEL and AGM) from 28Ah to 300Ah, up to
500Ah maintenance.
Part Number : CTEKXT14000
140
E l e c t r i c a l - CTEK DC/DC Battery Chargers
CTEK D250S Dual Battery Charger DC/DC
The D250S DUAL charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to
meet the charging requirements of different battery banks. The D250S DUAL is particularly suitable for charging vehicles that do not have
access to grid power supplies.
Perfect for boats with one battery, boats with start and service battery, boats with
start and service bank, caravan, and truck.
D250S Dual Features:
*Multi-step charging from alternators and solar panels
*Battery separator that eliminates diodes and VSR relays
*Maintenance charge of starter battery
*Solar panel regulator with Maximum Power Point Tracking, synchronised with
other current sources such as the alternator and/or wind
*Simplified installation of remote batteries for bow thrusters or anchor winches
D250S Dual Benefits:
*Maximised battery life due to minimised undercharge time
*Maximised battery capacity when the battery is kept fully charged to avoid harmful sulphate crystals on the lead plates and stratification
of the battery acid.
*Ability to take charge automatically from any power source that is connected to the CTEK D250S DUAL
*Reduced charging times and costs by decreasing engine idling and the dependency on AC power onshore through efficient use of
alternator and solar power
*Reduced environmental impact through extended battery life and a reduced idle time
*Minimal installation time and cost
Specifications:
Charging voltage: 14.4V at 77°F
Charging current: 20A
Type of charger: 5 step, fully automatic charging cycle
Type of batteries: 12V lead-acid batteries
Battery capacity: 40-300Ah
Insulation: IP65 (splash and dust proof)
Warranty: 2 Years
Part Number : CTEKD250S
CTEK Comfort Connect
Satisfy all the battery charging needs without any hassle. The CTEK Comfort Connect gives the opportunity to fast and simply reach
even well hidden batteries. There is no need to hassle with battery clamps every time, just permanently mount Comfort Connect on every
battery that needs charging and easily charge and maintain the batteries after use and for a prolonged life.
Specifications:
Terminal holes: 10.5mm
Length: 400mm
Works with all CTEK Chargers
Part Number : CTEKCTCONM10
141
E l e c t r i c a l - MasterVolt Battery Charger & Inverter
Mastervolt ChargeMaster 25 Amp Battery Charger
Nominal output voltage: 12 V
Total charge current: 25 A
Number of battery outlets: 3
Battery capacity range: 50-250 Ah
Nominal input voltage: 120/230 V (50/60 Hz)
*Plug & play battery chargers:
The ChargeMaster is a genuine plug & play battery charger, made all the easier by the
MasterBus one cable system. This smart and user-friendly platform for communication
and connections enables all components within your system to talk to each other.
Configurations, checking, digital switching between components, full monitoring and
safety: From the control panel or your computer, you have a comprehensive overview and
the latest system status at your fingertips.
Part Numbers :
MC1225 - (25Amp)
MC12100 - (100Amp)
MasterVolt Sine 800 Watt 12V Inverter
Features:
*An exceptionally effective use of the consumed input current (cos phi) > 0.98!
*Faster charging of batteries, even with when the input current is limited.
*Use of top quality components with a long lifespan.
*Savings in weight and space.
*Fewer installation materials.
*Capacity between 800 W and 5 kW.
*Suitable for high starting/peak loads, even up to 200% at brief consumption.
*230V/50Hz pure sine wave voltage; no faults or humming sounds from connected
equipment, not even with sensitive communication and measuring equipment.
*Fully MasterBus compatible with AC Power Analyser or MasterBus Inverter
Interface.
*All Mastervolt inverters provide pure sine wave voltage to ensure seamless
operation of the connected equipment. Mastervolt inverters are the best choice
available.
*Easy and safe connection
Mass products are equipped with certified industrial connection technology. The
larger inverter models have internal connections, the smaller models use a cable
and plug & play socket.
*Automatic switching
Easy to install within a mains voltage and/or generator power system, the Mass Sine inverter can switch between sources or combine the
supply using the Masterswitch or Systemswitch system.
Part Number : 24010800 (MasterVolt Sine 800 Watt 12V Inverter)
(This is a 12V system. Please contact us for a 24V version.)
142
E l e c t r i c a l - MasterVolt Inverter/Chargers
MasterVolt AC Master 12V Inverters
With a compact, lightweight and silent AC Master you can easily convert the voltage
of a 12 or 24 V battery into 230 V/50 Hz AC current the same way you would at home or
work. From microwave to hairdryer, DVD player to electrical tools, laptop to flatscreen.
The pure sine wave preserves your equipment without disruption, humming or lines on
the TV screen, while ensuring a longer lifespan of all connected equipment and saving
you the costs of all those adapters.
Features:
*Silent.
*Small and lightweight.
*Universal plug.
*Designed for recreational and semi-professional use.
Part Numbers :
28010300 - MasterVolt 300 watt 12V Inverter
(This is a 12V inverter. Please contact us for a 24V version.)
28010500 - MasterVolt 500 watt 12V Inverter
(This is a 12V inverter. Please contact us for a 24V version.)
MasterVolt Mass Combi Inverter/Chargers
The Mastervolt Mass Combi combines the best of both worlds, with an advanced
battery charger and silent inverter rolled into one compact device. It is ideal for most
boats, from sloops to 16-metre yachts, as well as for heavy mobile applications
(E-mark certified).
One of the key reasons for the Mass Combi’s popularity is its versatility. The starter
and service batteries are charged quickly and completely, while the inverter provides
silent and clean power. When insufficient shore power is available, the Mass Combi
battery provides a powerboost so that you can continue using your 230 V equipment.
Combined functionality:
*Charging two individual battery banks.
*Supplies 12 Volt onboard power.
*Invert to 230 V/50 Hz pure sine wave voltage.
*Multiple distribution and switching systems.
*Powerboost from battery when shore power is limited (shore/generator support).
*Parallel function.
Part Numbers :
MCMAS12-2000 - MastervVolt Mass Combi 12/2000 Invert/Charger
(This is a 12V system. Please contact us for a 24V version.)
MCMAS12-2500 - MasterVolt Mass Combi 12/2500 Invert/Charger
(This is a 12V system. Please contact us for a 24V version.)
143
E l e c t r i c a l - Battery Switches & Panel Switches
Dual Battery Switch - 175A
Dual Battery Switch - 150A
Dual Battery Switch
150A continuous at 12 Volt
Off-1-Both-2
Dual Battery Switch
175A continuous at 12 Volt
Off-1-Both-2
Part Number : 10005
139mm Overall Diameter
Part Numbers :
10001
10001-BP (Blister Packed)
MaXtek Battery Switch with Capped
Key
500 amps for 10 seconds, 100
amps continuous.
Capped Key
For 10097 Battery Switch
Part Number : 10097-018
Key for 10097
Battery Switch
Includes Key
Part Number : 10097-015
Part Numbers :
10097
10097-BP (Blister Packed)
Toggle Switch - 3 Pin
On/OFF/On Switch
Toggle Switch - 2 Pin
Part Number : 10249
With Name Plate
Part Number : 10248
EPDM cap for switch
EPDM cap
M10x1.0 Thread
for switch P10060-08
Boot to protect against moisture and
dirt.
Part Number : P10060-18
Toggle Switch - 2 Pin
with On/Off Plate
Part Number : 10245
144
Toggle Switch - 2 Pin
ON - OFF
2PSQ suitable for 10030 & 10060
switch panels
Part Number : P10060-08
Momentary Panel Switch - TMC
Momentary single pole switch, panel
mount.
Also switch replacement for TMC
toilet switch assembly part no: 8384
Part Number : 8391
E l e c t r i c a l - Panel Switches
Splashproof
Switch with LED
Splashproof
Switch with LED
DPDT - 6 Terminals
Rated 16 Amps at 12 Volt
Includes Labels
DPDT - 6 Terminals
Rated 15 Amps at 12V
Includes Labels
(On)-Off-(On) switch
Momentary on both sides
On-Off-On switch
Part Number : 10126-02
Splashproof
Switch with LED
DPDT - 5 Terminals
Rated at 15 Amps
Includes Labels
Part Number : 10126-01
Splashproof
Switch with
LED
(ON)-Off-On switch
SPST - 3 Terminals
Rated at 15 Amps
On-Off switch
Momentary on one side
Includes Labels
Part Number : 10125-01
Part Number : 10123-01
Splashproof Switch
Splashproof Switch
SPDT - 3 Terminals
Rated at 15 Amps
SPST - 2 Terminals
Rated at 15 Amps
On-Off-On switch
(centre position is off)
On-Off switch
Part Number : 10113-01
Part Number : 10112-01
MaXtek Push Pull Switch
TMC Toilet Switch box with fuse
This 2 position switch has
a brass body with a chrome
on brass knob, brass face
nut, washer and backup nut.
Stainless steel Spring for
long life.
Momentary Switch
complete with fuse holder.
Part Number : 8384
Mounting stem fits into
panels upto 1” thick.
12 Volt , 20 amp.
Part Numbers :
10212-2PB
10212-2-BP (Blister Packed)
145
E l e c t r i c a l - Kill Switches & Ignition Switches
Ignition Starter Switch
ACC-OFF-IGN-START
7 terminals
MaXtek Kill Switch Keys with
Lanyard
Includes seven keys to
fit all Johnson, Evinrude,
Mercury, Yamaha and
Honda kill switches.
Swivel snap hook
prevents tangles.
Part Numbers :
10284
10284-BP (Blister Packed)
Includes choke function
Maximum panel
thickness 16mm
Cut-out hole - 18mm
Part Number :
10274
10274-BP (Blister Packed)
Ignition Switch with Cap
OFF - ON - START
5 Terminals
Supplied with 2 keys
and slotted rubber cap
MaXtek Kill Switch with Coil
Lanyard
Part Numbers :
10286
10286-BP (Blister Packed)
Maximum panel
thickness 30mm
Cut-out hole - 18mm diameter
Part Number : 10276
Thermo Plastic Fuse Holder
Waterproof
Part Number : 11515A
Fuse Holder Waterproof PVC
To suit automotive style
fuses.
Part Number : 11517
Fuse - Plastic Automotive Style
Sold in packs of 5
Part Numbers :
11519-03A - 3 Amp
11519-05A - 5 Amp
11519-10A - 10 Amp
Fuse Holder - for switch panel
Fuse Holder
Designed to be used with
switch panels 10035 and
10065-BK.
Part Numbers :
P10065-04 (5A Fuse
Holder)
P10065-05 (15A Fuse Holder)
LED Switch Panel Lights
Part Numbers :
31386 - LED Bulb, green,
multi use 10-28V DC
31387 - LED Bulb, red,
multi use 10-28V DC
146
E l e c t r i c a l - Switch Panels
MaXtek 3 Way Switch Panel with Lighter Socket
* Cigarette lighter and socket
* Battery Meter - test two battery systems.
* 12volts , 5 - 10Amps
* Illuminated rocker switches; all individually fused.
* 3 x 5 Amp fuses are included. Includes Labels.
Dimensions: 165mm (h) x 115mm (w)
Depth required behind panel for wiring: 85mm
Part Number : 10083A (Blister Packed)
MaXtek 4 Gang - Fused Switch
Panel
MaXtek 6 Gang - Fused Switch
Panel
Black Aluminium Plate with
Illuminated Rocker Switches
Pop out fuse holders
20 Preprinted Labels
Black Aluminium Plate with
Illuminated Rocker Switches
Pop out fuse holders
20 Preprinted Labels
12 or 24 Volt,
Supplied with 5A fuses.
Dimensions:
123mm x 114mm
Part Numbers :
10043A
10043A - BP (Blister Packed)
165mm x 115mm
Part Numbers :
10065-BK
10065-BK-BP (Blister Packed)
6 Gang Splashproof
Switch Panel
6 Gang Waterproof
Switch Panel
* 6 switches with LED
indicators to show on.
* Weather resistant
* 30 pre-printed labels
1 x 5A ,3 x 10A, 2 x 15A
Resetable circuit breakers
Plastic, 190mm x 110mm
12 Volt,
Includes Labels
12V DC , 15A (per circuit)
98mm x 150mm
Part Numbers :
Black - 10016-BK
White - 10016-WH
Part Number : 10056-BK
3 Gang Waterproof Switch Panel
3 x 10A Resetable circuit breakers
Plastic, 130mm x 110mm
12 Volt,
Includes Labels
Part Numbers :
Black - 10013-BK
White - 10013-WH
147
E l e c t r i c a l - Switch Panels
MaXtek 6 Way Sprayproof Switch
Panel
• Sprayproof inline fuse
holders with fuses
• Waterproof to IP56
MaXtek 5 Way Switch Panel with
Socket
Dimensions:
95 H x 107 W x 75mm D
Switch Panel
• Power socket 16A
• Sprayproof inline fuse
holders with fuses
• Waterproof to IP56
Part Numbers :
900-6PAN
900-6PAN-BP (Blister Packed)
95 H x 107 W x 75mm D
Part Numbers :
900-5WPS
900-5WPS-BP (Blister Packed)
Label sheet included
MaXtek 4 Way Sprayproof Switch
Panel
• Sprayproof inline fuse
holders with fuses
• Waterproof to IP56
95 H x 107 W x 75mm D
Part Numbers :
900-4WP
900-4WP-BP (Blister Packed)
3 Gang Wave Panel
+ Cig Socket
* 3 switches with individual
circuit breakers
* 12V DC Illuminated Switches
* 12V DC Power Socket
* Resetable Circuit Breakers
* Spade wiring connectors and
mounting hardware included
* 28 Pre- selected label sheet
supplied
* CE Rated
125mm (h) x 100mm (w)
Requires 50mm depth for wiring
Part Number : 10084
148
6 Gang Circuit
Breaker Wave
Panel
* 6 Individual switches with LED
Indicator Lights
* Resetable Circuit Breakers
* Spade wiring connectors and
mounting hardware included
* 28 Pre- selected label sheet
supplied
* CE Approved
Dimensions:
160mm (h) x 100mm (w)
Requires 30mm depth for wiring
Part Number : 10018
E l e c t r i c a l - Bilge Pump Switches & Accessories
Sure Bail Float Switch
MaXtek Bilge Pump Switch
12V Switch with auto and manual position for control of an
automatic bilge pump.
81mm X 62mm
Corrosion-free
aluminium panel.
This Surebail float switch has a mercury switch for added
reliability.
It will operate with electrical systems from 6-32 volt DC and
will switch a maximum of 15 amps.
There is also the facility for a manual over-ride switch.
It turns on at a water level of 44mm and off at 22mm.
5 year warranty.
Part Number : SB1-FS
Part Numbers :
3206
3206-BP (Blister Packed)
Automatic Float Switch - Lalizas
This float switch is designed for the automatic control of
electrically driven bilge pumps.
Designed with a reliable
rolling-ball and switch
system that prevents rapid
on/off cycling found on some
switches and is safer than
mercury switches. When
water lifts the chamber
buoy up to 6 cm, the switch
automatically turns the bilge pump on until the water is dry.
This automatic float switch has a plastic housing.
Power: 12V/ 24V, Fuse: 15A max Material: ABS plastic
Dimensions: L 11cm W 7cm H 6.5cm
Part Number : 91549
Circuit Breakers - Surface Mount Switchable
Waterproof, Vapourproof, Manual
switchable, Surface Mountable,
Manual Reset.
Amp Rating - Part Number :
50 Amp - 90050A
60 Amp - 90060
60 Amp - 90060-BP (Blister Packed)
80 A mp - 90080
100 Amp - 90100
135 Amp - 90135
150 Amp - 185150F
175 Amp - 90175
Deck Plugs
and Sockets
Waterproof
Chrome Plated Brass with
Plastic Cap
Part Numbers :
3221 - 2 pin Small: 3 amp, 2 pins, 2-1/4” x 1-1/2”
3215 - 3 pin Small: 3 amp, 3 pins, 2-1/4” x 1-1/2”
3230 - 3 pin Large: 5 amp, 3 pins, 2-11/16” x 1-3/4”
3231 - 4 pin Large: 5 amp, 4 pins, 2-1/4” x 1-1/2”
MaXtek Cable Outlets
Chrome Plated Brass
Sizes refer to Cable size
6mm Cable size has 32mm
Base
16 and 19mm Cable sizes
have 52mm Base
Part Numbers :
11593 (6mm)
11590 (16mm)
11591 (19mm)
Blister Packs :
11593-BP (6mm)
11594-BP (8mm)
11595-BP (10mm)
149
E l e c t r i c a l - Plugs & Sockets
Stainless Steel 12V Marine Terminal Socket
12V Marine terminal socket made from 304 grade Stainless Steel.
Comes with push on terminals, mounting screws. (2 x 20mm
screws)
And rubber socket cover.
Part Number : 31308 (Blister Packed)
Marine Socket
Marine Plug & Socket
Cigarette style plug for accessories.
Ideal for mobile phones, lights etc.
12V DC only.
12 Volt , 10 Amp
Part Number : 31307
* High quality
* Watertight cap
* Locking system on plug
* LED power indicator
* Includes replacement 10A fuse
Part Number : 31306
Plug Male
Marine Plug - 12V
Rated at: 16A 220-240V
* Built-in 10A fuse
* LED power indicator light.
Part Number : 90394
12V Cigarette Twin
Socket + USB Ports
Features:
* Two USB 2.0 Charger ports
* Two USB outlets
* LED mood light when plugged in
* Adustable plug for convenient location
* Extends your cigarette lighter’s capability - Twin Socket Outlet
for appliances
Perfect for use with cellular phone, iPads, computers, cameras,
radar detectors, portable DVD players etc. Plug can be rotated 90
degrees.
Part Number : 01339-BK
150
Part Number : 31350
Triple 12V/24V Outlet
Can operate in both 12 and 24 Volt
All the metal parts are
stainless steel
Part Number : 31353
E l e c t r i c a l - Bus bars & Power Supply
Power Distribution Bar - 4 Stud
Marine grade tin plated copper bus bar on a insulated base.
Solid 20mm wide bus with 6mm studs.
Max Current: 150A
Max Voltage: 48V DC
Dimensions: 150mm x 32mm x 35mm (H)
Part Number : 11582-04
Power Distribution Bar - 6 Stud
Marine grade tin plated copper bus bar on a insulated base.
Solid 20mm wide bus with 6mm studs.
Max Current: 150A
Max Voltage: 48V DC
Dimensions: 232mm x 32mm x 35mm (H)
Part Number : 11582-06
Power Distribution Bar - 12 Way (2 Stud + 10 Screw)
Marine grade tin plated copper bus bar on a insulated base.
Max Current: 150A
Max Voltage: 48V DC
Dimensions: 150mm x 32mm x 35mm (H)
Part Number : 11582-10
Waterproof Connection Box
2 terminal strips with 4 conductors each.
Dimensions: 125mm x 75mm x 44 mm (H)
Part Number : 10094
230VAC - 12V or 24V Adaptor
Connect your 12v or 24V DC appliance to this power supply for operation of 230VAC mains.
Two models available.
Part Numbers:
Input Voltage:
Output Voltage: Output Current :
PL58593C 220 - 240 VAC (50 - 60Hz) 12V DC 5.8A NCBCDACDC
100 - 230 VAC (50 - 60Hz)
24V DC
6.0A
Part Numbers :
PL58593C - 12V DC
NCBCDACDC - 24V DC
151
E l e c t r i c a l - Battery Accessories
Super Charge MRV70 12V Allrounder Marine Battery
Powered by EXG Technology, the ALLROUNDER battery is built tough with high temperature tolerance and better vibration
resistance - fit for Marine & Leisure applications. It boasts of it’s ability to deliver high cranking and reserve capacity together
with high ampere hour rating. Starting and Cyclic capability in One.
Specifications:
Volts: 12
CCA @ -18 Degrees: 760
RC at 25 Degrees: 160
20 AH Cap: 105
Length: 305
Width: 174
TH: 224
Wet Weight: 25.38
Assembly: D
Terminal Type: DST
Other Features: CV,FDH,HE,LG
Height: 202
Part Number : MRV70
Battery Tray - Large
Suitable for securing batteries.
Plastic Battery Tray to keep a standard 24 or 27 size battery
secure and snug to prevent damage to passengers, boat,
equipment and battery.
Will fit battery with the following dimensions:
304mm(l) x 175mm (w)
{footprint} x 210mm (lip height)
Meets ABYC Standard
E-10 and U.S. Coastguard
requirements.
Part Number : 187012
Battery Boxes
Made of rigid polypropylene;
impervious to battery acid.
Comes with battery strap
Part Numbers :
77000-S (Small)
270(L) x 180(W) x 205(H)
77000-L (Large)
330(L) x 180(W) x 205(H)
Battery Strap
Strap for batteries, fuel tanks
and other small accessories.
Strap utilised in Part 77000
Battery Boxes.
Part Number : 3824
Bracket and Strap
Bracket and Strap for
Battery or Fuel Tank
Part Number : 3829
MaXtek Battery Power Box
The complete power solution for small craft. Easily isolate your
battery for storage. Complete with electronic battery meter so
you can check and ensure your battery is safe to go to sea. Easily
read the charge in your supply battery with a push of a button.
Plus a separate 12v DC socket is included for plugging in auxiliary
equipment such as search lights, pumps and phone chargers.
* Battery connection cables included
* 12v electrical power socket (Side of box) with separate
resetable circuit breaker
* Electronic Battery Condition Display
* Front access power cable terminals for easy connection
* Battery Box strap and hardware included
* Strong carry handle
Internal Dimensions:
342mm (l) x 200mm (w) x
195mm (h)
External Dimensions:
410mm (l) x 260mm (w) x
300mm (h)
Part Number : 77000-PW
Battery Terminals - Pair
Positive and Negative DP Battery
Terminals. Lead Construction with
Brass wing nuts.
Supplied as a Pair
Part Number : 3843
152
E l e c t r i c a l - Battery Accessories
Battery Cable
Superior quality marine cable and battery cable for use in marine battery wiring, windlass wiring, and similar
applications. All cable meets or exceeds all the requirements of regulatory bodies. Our cable features a durable
yet flexible PVC insulation that is resistant to acid, alkalis, abrasion, flame, gasoline, oil, ozone, moisture and
fungus.
Flexible tinned copper stranding of our cable makes it easy to route and mould to any application as well as
absorb vibration to avoid damage to connections.
Part Numbers - Description - Spec
CAB16DS
Double Shield 16mm tinned - Ø9.1mm-Lloyds approved-600V/1kV-0.196kg/m
CAB25DS
Double Shield 25mm tinned - Ø11.9mm-Lloyds approved-600V/1kV-0.305kg/m
CAB35DS
Double Shield 35mm tinned - Ø13.3mm-Lloyds approved-600V/1kV-0.400kg/m
CAB50DS
Double Shield 50mm tinned - Ø15.3mm-Lloyds approved-600V/1kV-0.555kg/m
Available in Black only
8 Core Shielded Cable
Shielded 4-Pair Foil Shield FT-4 Low Capacitance
24 AWG Stranded Tinned Copper Drain Wire,
Foam Polyolefin Insulation,
100% Aluminium Foil Shield,
Grey PVC Jacket FT-4
-20° C to 75 ° C,
Certified:
CSA CMG LL61365 FT-4 60 degrees C
OR CSA AWM II A 150V 80 degrees C
OR RU AWM E107863 VW-1 Syyle 2919
Sold Per Metre
Part Number : 1817
Electrical Tape
One pack contains 3 rolls
Length: 10m
Colour: Black, Green, Red
Part Number : 151068
153
E l e c t r i c a l - Bilge Blowers & Fans
Bulkhead Mounted Bilge Blower
Inline Blower 3”
Air Flow: 90 CFM
Rubber mounting gasket
eliminates vibration for
quiet operation
Dimensions: (LxWxH)
188x143x160mm
Part Numbers :
6622 - 12 volt
6623 - 24 volt
3” intake pipe
Airflow: 130 CFM
12 Volts , 2.7 A
Dimensions: (LxWxH)
127 x 127 x 89mm
Part Number : 13019-BK
TMC In Line-Blower 3”
TMC In Line-Blower 4”
3” intake pipe
Air Flow: 122CFM
12 V DC , 4.5A
4” intake pipe
Air Flow: 230CFM
Dimensions: (LxWxH)
210x135x112mm
High Impact ABS housing allows less vibration and dampens
unwanted sound.
Designed with spark proof motor for added safety.
Part Number : 6624
Dimensions: (LxWxH)
204x152x131mm
ABS housing allows less vibration and dampens unwanted
sound.
Designed with spark proof motor for added safety.
Part Numbers : 6626 - 12 Volt
6625 - 24 Volt
Bulkhead Blower - High Capacity - 3680 L/Min
Bulkhead Mounted Blower with Bracket
Provides fresh air to the bilge in order to prevent explosion.
Bulkhead Mounted Bilge Blower for 3” intake pipe
Air Flow: 3680 L/Min (130 CFM)
Power Source: DC 24V/2.5A
Dimensions: (LxWxH) 188x143x212mm (7.41”x5.63”x8.35”)
Intake Pipe: 75mm
Part Number : 6627
Cooling fan with Clip on mounting
Cooling fan with Suction Cup
5” (127mm) blade
Plugs into cigarette lighter socket.
Adjustable angle up to 360°.
2 speed, 5” (1.5m) long cord.
5” (127mm) blade
Plugs into cigarette lighter socket.
Adjustable angle up to 360°.
2 speed, 5” (1.5m) long cord.
Part Number : 13064
Part Number : 13063
154
Electronics & Navigation
157. FLIR -Thermal 168. VHF Aerials
Imaging for Night VHF Aerial / Antenna with 5m
cable
Vision
VHF Aerial / Antenna - Quick Fit
New FLIR MU-602
FLIR Voyager II
FLIR M Series
New FLIR MD Series
FLIR BHM Series
FLIR HM Series
FLIR MS Series
FLIR Handheld Series Travel Case
PathFindIR
162. AdvanSea
Sailing
Instruments
Depth S400 Series
Speed S400 Series
Multi S400 Series
Wind S400 Series
Wind-a S400 Series
166. C Map Charts
C-MAP MAX Charts
C-MAP NT+ Charts
167. GPS
Antennas & AIS
Systems
External GPS 133 Active Marine
Antenna
1240 smart GPS Antenna
AdvanSea AIS TR-200 Transceiver
AdvanSea AIS RX-100 Receiver
NASA Marine AIS Receiver
156
VHF 1.0m Stainless Steel Antenna
Masthead VHF 1.0m antenna with
Bracket
VHF Aerial 0.6m for aluminium
boats
AM/FM Aerial 1.8m / Antenna
with 5m cable
AM/FM Aerial / Antenna - Quick
Fit
AM/FM 1.0m Stainless Steel
Antenna
VHF 2.5m SS & UltraGlass QuickFit
Antenna
Pacific Omnipro UHF DVB-T/TV/FM
Antenna
VHF/Cellular Stainless Steel
QuickFit Mount
Antenna Adjustable Base - QuickFit
Heavy Duty
Antenna Base - Fixed Position
VHF/Cellular Through-Deck Mount
Antenna Base Rail Mount QuickFit
Antenna Base Rail Mount
VHF / AM / FM - band splitter
Adjustable Base for VHF Antenna
Antenna Adjustable Base - QuickFit
10m Extension Cable VHF
5m extension cable
FastFit Jack
VHF Cable Joiner
171. Compasses
Lalizas - Ritchie Explorer Bracket
Mount Compass
Lalizas - Ritchie Explorer S-53
Surface Mount Compass
Lalizas - Ritchie Sport X-10b-M
Bracket Mount Compass
Compass - Bracket Mount
Compass - Bracket Mount
172. Binoculars
Binoculars Sea Nav SAF 7x50
Autofocus
Binoculars - 8 x 21 Centrefocus
with carry case
173. Brass Clocks
& Barometers
Time & Tide Clock
Clock Classic Sailing Ship
Signal Flag Clock
Brass Ships Clock
Brass Barometer
Barometer Open Dial Brass
Barometer & Thermometer
Ships Clock in 15” Timber Wheel
Thermometer / Hydrometer / Clock
Clock with wooden base
F L I R - Marine Thermal Imaging for Night Vision
New FLIR MU-602
The New FLIR MU-602 is the most technologically advanced
thermal night vision system available to the maritime industry
today. A multi-sensor payload lets you zoom out to the horizon
at night, in low visibility and in rough conditions. The base model
MU-602C includes a cooled midwave infrared, high-resolution 640
x 512 thermal camera and a high-resolution 550-line color camera,
so you’re assured of the sharpest video quality available, night and
day. Additional sensor options include a low-light black and white
camera to help with low-light situational awareness and/or a wide
field of view uncooled longwave infrared, high resolution
640 x 480 thermal camera to maximize the system’s spectral
range. All cameras include optical zoom.
Key Features:
*Pan/tilt: all versions of the MU- / MV-Series can pan 360° continuously and tilt +/- 90°. This provides excellent situational awareness.
*Active gyro-stabilization: provides steady imagery, even in rough seas; this is critical for getting the most out of the FLIR MU- / MVSeries long-range imaging capability.
*Radar tracking: allows operators to use the FLIR MU- / MV-Series to identify and track specified radar returns, enhancing vessel safety
in low visibility conditions.
*Video tracker: the user can select a given target that can be automatically tracked by the video tracker. Selecting and engaging in
tracking mode is easily done by the touch of a button. Once the tracker is engaged, the camera will follow the object as long as it can be
seen.
*Picture-in Picture mode: with the Picture-in-Picture mode (PIP) two sensors can be displayed on a single display. The user can select
which sensor to display as full screen.
*Digital detail enhancement (DDE): assures a crisp thermal image even in scenes with extreme temperature dynamics.
*Continuous optical zoom: The FLIR MU- / MV-series have a continuous optical zoom on the thermal image allowing to have a closer look
at objects which are far away.
*Ball up / Ball down installation: The FLIR MU- / MV-series can be installed in ball-up or ball-down position, giving you more flexibility
installing it on your vessel.
Other Features:
*Extreme long-range performance for optimal situational awareness and maritime threat detection to the horizon.
*Precision gyro-stabilization and electronic stabilization for optimal performance in rough conditions.
*Network-ready.
*Radar slew-to-cue.
*Video Tracker.
*IP Addressability.
*Digital Video via Ethernet.
157
F L I R - Marine Thermal Imaging for Night Vision
FLIR Voyager II / III
Voyager II is a powerful, GYRO STABILISED, multi-sensor, thermal night
vision system, specifically designed for navigation and security in marine
applications.
It features two thermal imaging cameras and one daylight / low light
camera. One thermal imager has a wide angle field of view and is ideal
for navigation and situational awareness. The other, with the narrow field
of view, allows the user to zoom in on objects that are very small or far
away. The Voyager overlays these images to provide a high resolution
image without losing broad situational awareness.
This is the ultimate navigation tool for Superyachts.
Absolute Marine was the first international distributor to install FLIR
Voyager.
FLIR Voyager III
*Automatic Video Tracking
*Temperature Indication
Let us show you how FLIR Voyager can enhance the security on your boat.
FLIR M Series
The Overall Winner of the DAME Award 2009 is FLIR Systems for the
M-626L Series Thermal Night Vision System.
There are several models available including the New 2013 FLIR M-618CS
Gyro-Stabilized, Long-Range Thermal Night Vision System.
Contact us for more details.
M-Series cameras feature:
* Clearest, most detailed thermal imagery– M-Series cameras deliver up to fourtimes the resolution of other systems, giving you clear, sharp images with detail
you never thought possible in such an affordable thermal night vision system.
* More than twice the detection range of earlier systems– The new M-Series
systems use FLIR’s latest generation of thermal imagers. Featuring the highest
sensitivity, and more than double the range performance of current systems,
M-Series cameras let you see more - and see farther - even in the dead of night.
* M-Series systems are available with either standard resolution or high
resolution thermal imagers.
* Lowlight TV Camera– Provides enhanced navigational abilities during twilight
hours, when operating along intracoastal waterways, and near harbour
entrances. Anywhere you can see a little, the lowlight camera will help you see
more.
* Colour on-screen symbology– Part of FLIR’s exclusive Accu-Point control and display technology, M-Series
cameras have detailed, 3D colour on-screen symbology that gives you instant access to system status,
position, and configuration.
158
F L I R - Marine Thermal Imaging for Night Vision
FLIR MD Series
The FLIR MD series is an affordable, fixed-mount thermal night vision system that
helps with steering around obstacles, collision avoidance and finding people in the
water at night. Simple to mount and easy to integrate into your existing electronics,
MD-Series outputs standard analogue video that can be easily displayed on any
monitor at the helm or other monitors on the vessel.
Key Features of the FLIR MD-324
Key Features of the FLIR MD-625
*320 x 240 resolution
*2x, e-zoom standard
*Ethernet-enabled control for integration into your current
electronics
*Compact, all weather, water proof enclosure provides for easy
mounting options
*Ball up or ball down mounting
*640 x 480 resolution
*2x, 4x e-zoom standard
*Ethernet-enabled control for integration into your current
electronics
*Compact, all weather, water proof enclosure provides for easy
mounting options
*Ball up or ball down mounting
General Specifications:
Sensor type: 320 × 240 VOx Microbolometer
FOV: (Field of View) 24° × 18° (NTSC)
Focal length: 13 mm
E-zoom: 2×
Image processing: FLIR Proprietary Digital Detail Enhancement
General Specifications:
Sensor type: 640 × 480 VOx Microbolometer
FOV: (Field of View) 25° × 20° (NTSC)
Focal length: 25 mm
E-zoom: 2×, 4x
Image processing: FLIR Proprietary Digital Detail Enhancement
Range perfomance:
Detect man-sized target: 440 m
Detect small vessel: 1,340 m
Range perfomance:
Detect man-sized target: 930 m
Detect small vessel: 2,800 m
Part Numbers :
MD-324
MD-625
FLIR BHM Series
The new 2013 BHM-Series complement the successful HM-Series. The HMSeries are monoculars. Many users requested bi-oculars. That is why FLIR
Systems developed the BHM-Series.
Bi-oculars, like the FLIR BHM-Series are less tiring to use for the eyes
than a monocular. By using a bi-ocular the ability to detect faint objects is
enhanced. This means that you have more chance to detect small objects
against the background. It is also easier to hold bi-oculars steady when
looking at an object. An advantage if you are looking at small things which
are far away.
BHM-Series are shock-resistant thermal imaging cameras. They produce
a crisp image in the darkest of nights. The BHM-Series will dramatically
increase your situational awareness. The BHM-can be used on all types of
vessels. Yachts, commercial ships, tug boats, work boats, police and law
enforcement boats will all benefit from the power of thermal imaging.
The New 2013 FLIR models come with InstAlert
Palette which highlights the hottest subjects in
any scene. As per the image above.
159
F L I R - Marine Thermal Imaging for Night Vision
FLIR HM Series
The New 2013 HM-Series are handheld shock-resistant thermal
imaging cameras. Also known as FLIR’s First Mate and Scout.
Thanks to the HM-Series, security professionals and law
enforcement officers can see suspects in total darkness, through
smoke, and light foliage.
Key Features of the FLIR HM Series
* New InstAlert Feature
* Boating
* Crisp thermal images
* Security
* Choice of lenses
* Hunting
* The HM-Series come standard with a “hot shoe” which
facilitates easy external mounting. The “hot shoe” provides video
out and power supply connection.
* Extremely portable and rugged
* Easy-to-operate
* Long battery life
Part Numbers :
HM-224HM-324HM-307
FLIR Optical 2x
Extender
The HM Series can be equipped
with a 2 X extender lens. It offers
a 12° field of view for longer range
performance.
Part Number: 322-0152-00
What can I see with a FLIR Handheld thermal imager?
Examples of images taken in complete darkness. The pictures illustrate three thermal images taken with a HM-324.
The three image settings of the FLIR; Black Hot, White Hot, InstAlert
The trees are at an approximate range of 100m
Trees and fence posts are slightly warmer than the surroundings.
Image Setting: Black Hot
Image Setting: White Hot
FLIR MS Series
The new 2013 FLIR MS-Series hand held thermal imaging camera gives
every boatie the power to see clearly in total darkness. It can be used for
many maritime applications. Whether you are anchored in port or sailing in
the open sea, you will be able to see in total darkness.
There are several models available. Contact us for more details.
Key Features of the FLIR HM Series:
* New InstAlert Feature
* Crisp thermal images
* Choice of lenses
* LED tasklight
Part Numbers :
MS-224B
MLS-317
MS-324B
MLS-318
160
* Boating
* Security
* Hunting
The New 2013 FLIR models come with
InstAlert Palette which highlights the
hottest subjects in any scene. As per the
image above.
F L I R - Automotive Thermal Imaging for Night Vision
FLIR Handheld Series Travel Case
The ultimate in security and transportation for your FLIR BHM, HM & and MS series
thermal imaging camera.
Removable foam inserts give you the power to create pockets for other FLIR accessories
such as Lenses, USB cables, Hot Shoes, Spare Batteries etc.
This case has been moulded out of durable, hard materials to ensure it can withstand all
kinds of impact. Removeablet is also created in briefcase format so you can carry around
your thermal camera easily and safely.
Part Number : 4125400
Camera and accessories not included.
PathFindIR (Automotive)
The FLIR Systems PathFindIR is a compact thermal imaging camera that
significantly reduces the hazards of night time driving. It enables drivers to see
much further, with improved clarity, than with standard headlights. Drivers can
detect and monitor pedestrians, animals, or objects on or near the road, allowing
more time to react to any potential danger. PathFindIR helps to detect and
recognize potential hazards in total darkness, smoke, rain and snow.
There are two models available, the Pathfinder (Camera only) and the Pathfinder
Kit (Includes Camera, 7” LCD screen and everything for installation)
Contact us for more details.
Excellent image quality - The PathFindIR incorporates an uncooled 320 x 240
pixels microbolometer. This maintenance free system delivers crisp video images
which can be displayed on virtually any display that accepts composite video.
Wide-angle lens - The PathFindIR is equipped with an 19 mm wide angle less. It give you an extremely wide field of view (36°), resulting in
excellent situational awareness.
Designed for use in harsh environments - The PathFindIR is extremely rugged. Its vital core is well protected, IP67 rated, against humidity
and water. The PathFindIR can be cleaned with a hose just like any other equipment. The PathFindIR operates between -40°C and +80°C.
The PathFindIR has a built-in heater to defrost its protective window. This heater is capable of defrosting a 2mm layer of ice frozen to
the window within 15 minutes when ambient temperature is -30°C and wind speed against the window is 100 km/hr. The heater is
automatically powered when window temperature is less than +4°C and powered down when window temperature is more than +6°C.
This ensures a clear lens and perfect infrared images displayed on your monitor even in extremely cold environments.
Compact, easy to install - The PathFindIR is extremely compact (5.8 x 5.7 x 7.2 cm) and weighs only 340 grams. This allows for easy
integration in any vehicle.
The PathFindIR can easily be installed behind a vehicle grill or in any other compact location.
Pigtail cable - Optionally a “pigtail” cable is available. It connects to the PathFindIR and has just 2 connectors: a power connector to
connect the camera to a power supply and a videoout which can be connected to practically any display that accepts composite video.
Thermal imaging for driver vision enhancement - Thermal imaging is a powerful driver’s vision enhancement system, which significantly
reduces the risks of night-time driving and allows you to see up to 5x further than with headlights. It produces clear images in total
darkness, smoke, rain and light fog. It needs no light whatsoever to operate.
Thanks to thermal imaging, drivers can quicker detect and recognize potential hazards and avoid deadly accidents.
161
Instruments are the core component of any yacht navigation system. The advanSea S400 series uses cutting edge
technology to provide accurate data for cruisers or racers.
• Accuracy, optimal legibility, flexibility and ease of installation are the key benefits of the S400 series, together with easy
intuitive operation with direct function access.
• LCD screens with wide-angle viewing and super size digits for unmatched visibility. Watertight display facia (IP66) ;
displays feature an anti-fogging coating for optimal safety even in extreme conditions.
The S400 series is available with a choice of compatible transducers manufactured by Airmar or Plastimo. The instruments
can also operate as ‘stand alone’ with intelligent transducers or an NMEA0183 source.
DEPTH
HI-PERFORMANCE DEPTH SOUNDER
GIANT DIGITS (45 MM)
F E AT U R E S
• Depth : 0.5 to 199 m* (1.6 to 652 ft) with keel offset.
• Depth trend indication.
• Deep and shallow alarms.
• Low battery alarm.
• Simulation mode.
*Depends on transducer
Part Number
DEPTH S400 with thru-hull transducer
DEPTH S400, instrument only
PL57755
PL57748
Supplied with weather cover.
Lock in screw collar requires no tools
to secure to bulkhead
Watertight
gasket
162
SAILING INSTRUMENTS
S400 SERIES
SPEED
MULTI
LOG-SPEEDO
GIANT DIGITS (45 MM)
ALL THE FUNCTIONS OF
S400 DEPTH AND SPEED
Delivers all speed, distance, time and temperature data,
together with countdown function.
Choice of data displayed on 2 lines.
F E AT U R E S
F E AT U R E S
• Water speed : 0-60 knots, 0-69 mph, 0-111 km/h.
• GPS speed if connected to compatible (NMEA0183)
navigator.
• Total and trip log.
• Elapsed time and countdown race timer.
• Water temperature.
• Speed trend indication.
• Surface speed high and low alarms.
• Low battery alarm.
• Simulation mode.
• Lower line : 22 mm high digits.
• Upper line : 32 mm high digits.
• Depth and speed trend indication.
• Proprietary Bus interface and NMEA0183 input/output.
• Simulation mode.
Part Number
SPEED S400 with Plastimo thru-hull, 30kts
PL57757
SPEED S400 log-speed, instrument only
PL57749
Supplied with weather cover.
Part Number
MULTI S400 with Plastimo thru-hulls
(depth + speed transducers)
PL57759
MULTI S400, instrument only
PL57750
Supplied with weather cover.
163
SAILING INSTRUMENTS
S400 SERIES
WIND
WIND-a
ALL ESSENTIAL WIND
DATA ON A DIGITAL
DISPLAY
WIND DIRECTION INDICATION
ON A 360° ANALOGUE DISPLAY
Same features as WindS400 model.
F E AT U R E S
F E AT U R E S
• Instant wind direction information in analogue and digital display.
• Data displayed on 2 user-settable lines (upper line 32 mm high,
lower line 22 mm high).
• Proprietary bus interface and NMEA0183 input/output.
• Wind speed (0 to 199 knots).
• Wind direction through 360°.
• Wind trend indication .
• Apparent and true* wind angle and speed.
• Wind direction at 1° resolution.
• VMG speed.
• Wind speed alarm.
• Low battery alarm.
• Simulation mode.
• Proprietary bus interface and NMEA0183 input/output.
• Simulation mode.
* if connected to speedometer delivering surface speed.
WIND, complete with masthead unit + 25 m cable
WIND, instrument only
Part Number
WIND-a, complete with masthead unit + 25 m cable
PL57753
WIND-a, instrument only
PL57754
Supplied with weather cover.
Part Number
PL57751
PL57752
Supplied with weather cover.
AdvanSea masthead transducer unit
High quality design incorporating precision bearings
and aluminium cantilever arm.
Sensitivity threshold is very low to ensure an optimum accuracy
even in light winds. Balanced wind vane for increased accuracy
and stability at heel. Sturdy construction and watertight
connector. High quality design incorporating precision bearings
and aluminium cantilever arm.
164
Part Number
AdvanSea masthead transducer unit with 25 m cable
PL57761
SPECIFICATIONS
S400
COMMON FEATURES
DEPTH
MULTI
SPEED
WIND
WIND-a
External unit dimensions
Operating voltage
Display power consumption
Operating temperature
Storage temperature
Mounting
Drilling Ø
Fixing
“O” ring for bulkhead mount
Buzzer/external alarm output
112 x 112 mm
10 V to 16.5 V
Below 150 mA Incl. backlighting
-10 to + 50° C
-20 to + 60° C
Flush mount
48 mm
Rear locking collar
Yes
Yes / Yes
112 x 112 mm
10 V to 16.5 V
Below 150 mA Incl. backlighting
-10 to + 50° C
-20 to + 60° C
Flush mount
48 mm
Rear locking collar
Yes
Yes / Yes
Screen
Monochrome LCD, TN technology (Twisted Nematic)
Monochrome LCD, TN technology
(Twisted Nematic)
Backlit keys
Backlit screen
Anti-fogging screen
LCD
Waterproof rating
Intuitive menu
Weather cover
Simulation mode
Yes
Yes, amber, 5 levels (Off, 1, 2, 3, 4)
Yes
Transflective
IP66 front face
Yes
Yes
Yes
Yes
Yes, amber, 5 levels (Off, 1, 2, 3, 4)
Yes
Transflective
IP66 front face
Yes
Yes
Yes
INSTRUMENTS SPECIFIC FEATURES
Depth range
-
-
Water speed
-
0 to 60 knots
-
-
Depth speed
-
Yes if connected through NMEA0183
-
Wind speed
-
-
-
Wind direction
-
-
-
0 to 180° Port-Starboard 0° / 359°
True wind
-
-
-
If connected to speedometer with surface speed
-
1° in direction
Depth resolution
Speed resolution
0.5 to 199 m
-
0.1 m from 0 to 19.9 m / 1 m from 20 to 199 m
-
0 to 199 knots
0.01 knt from 0 to 19.99 knt / 0.1 knt from 20 to 60 knt 0.1 knt from 0 to 19.9 knt / 1 knt from 20 to 199 knt
Display damping
1 - 30 steps
1 - 30 steps
NMEA0183 input ports
1
1
NMEA Input sentences
Speed : VHW/VTG/VLW/MTW/RMC - Depth : DPT / DBT
Multi : VHW/ VTG/ DPT/ VLW/ MTW/ RMC/ DBT
VHW / VTG / MWV / RMC / VWR
NMEA0183 output ports
1
1
Output sentences
VHW/ VLW/ MTW/ DBT/
DPT
Proprietary bus
DBT/ DPT
VPW / MWV / VWR
Half-Duplex series connection (38400 bauds on one wire)
Half-Duplex series connection (38400 bauds on one wire)
Countdown
-
Yes
Yes
-
Digits size
45 mm
45 mm
Upper line : 32 mm
Lower line : 22 mm
Upper line : 32 mm
Lower line : 22 mm
Units
Alarms
°F & °C - Feet - Metres - Knots - Km/hr - Miles/hr - V - Miles - Km
Degrees - M/s - Beaufort - Knots - Km/hr - Miles/hr - V
Deep & shallow speed/
High & low depth /
Low battery
Strong wind / Low battery
High & low depth /
Low battery
Service and warranty
2
WARRANTY
VHW/ VLW/ MTW
YEARS
All our instruments
come with a
2-year warranty.
Transducers
and antennas
1-year warranty.
Deep &
shallow speed /
Low battery
For offers and conditions : Consumer Service on www.advansea.com
Engineered and manufactured by marine
electronics specialists, the advanSea series
offers top performance, designed for the
extremes of marine environment.
By purchasing an advanSea instrument, you
will benefit from the worldwide support of the
Plastimo network.
Plastimo’s extensive network of distributors
ensures that no matter where you cruise, expert
technical advice and unrivalled service is always
available.
Misprints excepted, the descriptions in this brochure reflect the instruments specifications, on printing date. Plastimo reserves the right to alter technical specifications without notice.
Photos are not binding or part of a contract. Photos : Axena - copyright Plastimo, Jean-Marie Liot, Baptiste Leglatin.
165
E l e c t r o n i c s - C - Map Cards
C-MAP MAX Charts
Bring your electronic charts to life with MAX, the ultimate navigator,
and make cruising, sailing and fishing easier, safer and more fun. You’ll
benefit from the most accurate chart detail, versatile features and a
wealth of important data.
Key Features of the C-Map MAX charts:
*Dynamic NavAids:
Include detailed information on navigational aids, including name,
color, information on frequency, range of the light, etc.
*Guardian Alarm:
Performs an automatic forward-scanning check for obstacles. Use this feature as an added backup to alert you if you head toward a
potentially harmful object.
* Route-check:
Is an extension of Guardian Alarm, helping keep you safe by indicating obstacles along the segments between waypoints.
There are several maps and cards available for different Fishfinders and Chartplotters.
Charts can be created on either SD Cards or C-Cards depending on the instrument it will be used on.
Contact us for more details.
Popular Charts - MAX
Popular Charts - NT+
This is the SD type card version, and will work with the AdvanSea
C.56 or T.56, Navman 8084 or 8120 and Northstar M84 or M121.
Please contact us for more instruments that this card will work
with.
This Map card is formatted to work with all Navman or
Northstar GPS units that take the C-card style of C-map card,
e.g all current models except the 8084, 8120, M84, M121.
Part Numbers :
M-AU-M222-SD
C-Map MAX Chart (SD Card) for New Zealand, including
Chatham Islands and Kermadec Islands
M-AU-M001-SD
C-Map MAX Chart (SD Card) for New Zealand and South Pacific
Islands including Vanuatu, New Caledonia, Fiji, Tuvalu, Samoa,
Tonga, Nuie, Tahiti and French Polynesia.
M-AU-M222
C-Map MAX Chart (C-Card) for New Zealand, including Chatham
Island and Kermadec Island
MAX SD Card Chart
166
MAX C Card Chart
This NT+ format is also compatible with older units e.g. all
Navman 5000 series and 6000 series units and even Tracker
1250, 900 and 950 model units.
Part Numbers :
M-AU-C222
C-Map NT+ Chart (C-Card) for New Zealand, including
Chatham Island and Kermadec Islands
M-PC-C204
C-Map NT+ Chart (C-Card) for the South Pacific Islands which
include: Vanuatu, New Caledonia, Fiji, Tuvalu, Samoa, Tonga,
Nuie, Tahiti and French Polynesia.
NT+ C Card Chart
E l e c t r o n i c s - GPS Antennas & AIS
1240 smart GPS Antenna
GPS Antenna - GPS Aerial
Navman 6500 GPS Reciever
This GPS Antenna is designed to suit the most Navman and Northstar GPS combo units that have the LT8 ( all
plastic 8 pin ) plug. e.g.
Navman: TF6500 , TF6507 , TF6600 , TF8084 , TF8120
Northstar: 650 , 657 , 660 , M84 , M120
Part Number : NS004743
External GPS 133 Active Marine Antenna
External GPS Antenna with bracket
High Gain active GPS antenna
Fully waterproof and suitable for marine applications
133 active GPS antenna. This antenna is used for GPS devices with an SMA connection.
Brands using this antenna include; Garmin, Lowrance, Raymarine, Humminbird, Navman, Northstar, Simrad
Navman and Northstar models that use this GPS aerial are: 5380, 5500, 5505, 5605, Northstar 538 etc.
The PA150 antenna has a dimension of 94mm (diameter) x 135mm (height).
Supplied with 10m metre of RG58 cable connected to a SMA type connector.
Part Number : PL57743
AdvanSea AIS TR-200 Transceiver
See and be seen: this new Class B AIS transceiver module enables both the transmission and
reception of AIS data from your boat. Your vessel identification data is programmed into the TR-200
using the software and cable included with the transceiver.
You can also transmit a distress message using the main selection control, or turn off transmit function
during races if you do not wish to be seen.
The TR-200 AIS transceiver output connects to your GPS/Plotter via the NMEA0183 interface and to your PC through a serial
connector (included). An active GPS antenna is supplied with the TR200 to supply the vessel position data to the transmitter module.
Compact and waterproof to IPX7 construction.
Part Number : PL58557
AdvanSea AIS RX-100 Receiver
More Compact than the TR200, the RX-100 outputs the received AIS data transmitted by vessels with
class A and B transponders on the VHF network and displays it on an AIS compatible GPS/Plotter via and
NMEA 0183 interface.
The RX-100 is also supplied with a USB cable for PC applications.
Part Number : PL58558
NASA Marine AIS Receiver
The AIS engine receives AIS data, converts it to an NMEA format and outputs via a 9 pin Serial plug
connector.Includes SeaClear PC Plotter software on CD - suitable for use with windows 2000 and newer.
* The AIS engine requires its own marine VHF antenna and cannot be shared with a transceiver antenna.
Part Number : NSAAIS
167
E l e c t r o n i c s - AM/FM & VHF Aerials
VHF Aerial / Antenna with cable
Available in 1.5m, 1.8m and 2.5m
Frequency VHF: 156-162 MHz
Radome: UltraGlass
Ferrule: Nylon
Antenna Type: Half wave
Gain: 3dBi
“Marine Gain”: 6dB
Typical VSWR at 156.8MHz: 1.2:1
DC Meter Reading: Open Circuit
Note: 54040 Base sold separately
Part Numbers :VHF15
7371
P6004 1.5m (4m Cable)
1.8m (5m Cable)
2.5m (5m Cable)
AM/FM Aerial 1.8m / Antenna
with 5m cable
Designed to “twin” with (7371)
VHF antenna. Enables radio
reception further out to sea.
Frequency: AM/FM
Radome: UltraGlass
Ferrule: Nylon
Antenna Type: Tuned Dipole
DC Meter Reading: Open Circuit
Height: 1.8m
Note: 54040 Base sold separately
Part Numbers : 7411
( 1.8m )
VHF Aerial / Antenna - Quick Fit
AM/FM Aerial / Antenna - Quick Fit
These antennas are the only
marine antennas which can be
removed and remounted on the
boat at the user’s convenience.
The cable is hardwired to the
mount (sold separately), so the
antenna can be removed without
pulling or cutting the cable.
These antennas are the only
marine antennas which can be
removed and remounted on the
boat at the user’s convenience.
The cable is hardwired to the
mount (sold separately), so
the antenna can be removed
without pulling or cutting the
cable.
Note: Requires Quick-Fit style
base, sold separately
Part Numbers : P6106
P6182 7370
P6102 ( 0.45m )
( 1.0m )
( 1.8m )
( 2.5m )
Note: Requires Quick-Fit style
base, sold separately
Part Numbers : P6107
P6183 7413
P6142 ( 0.45m )
( 1.0m )
( 1.8m )
( 2.5m )
VHF 1.0m Stainless Steel Antenna
AM/FM 1.0m Stainless Steel Antenna
VHF 1.0m antenna. The P6091 offers real value for money, full
performance and durable construction. 5m Cable
It comes complete with a laydown mount.
AM/FM 1.0m antenna. The P6092 offers real value for money, full
performance and durable construction. 4m Cable
It comes complete with a laydown mount.
Part Number : P6091
Part Number : P6092
Masthead VHF 1.0m antenna
with Bracket
VHF Aerial 0.6m for aluminium
Masthead VHF 1.0m UltraGlass
antenna complete with bracket.
VHF 0.6m Flexi antenna for aluminium boats. Supplied
with mount and 2m hard wired cable. Must be installed
on a suitable ground plane.
Part Number : P6184
168
boats
Part Number : P6087
E l e c t r o n i c s - Aerials & Accessories
VHF 2.5m SS & UltraGlass QuickFit Antenna
VHF 2.5m antenna. Perfectly proportioned for larger boats. The extra height
means the antenna can get a clear all-round view, maximising antenna
performance.
Pro Series QuickFit Antennas are a breakthrough: the only marine antennas
in the world which can be removed and remounted on the boat at the user’s
convenience. The cable is hardwired to the Pro Series mount, so the antenna
can be removed without pulling or cutting the cable.
LongReach Pro Series Quick Fit antennas are superbly finished, with glossy UltraGlass and stainless steel ferrules to
enhance the appearance and strength of the antenna. LongReach Pro Series antennas are designed for customers who
demand the best.
LongReach Pro Series antennas must be used with LongReach Pro Series Quick Fit Mounts, which give the options of
side, deck or pipe mounting your antenna.
Part Number : P6123
Pacific Omnipro UHF DVB-T/TV/FM Antenna
Complete kit to enable TV and radio reception in your boat or motor home.
This Pacific Aerials UHF TV Antenna has an outstanding performance on UHF
and FM bands and inside VHF fringe areas.
Strong, light assembly and design gives superior performance. Antenna is not
direction sensitive so it will receive signals regardless of your boats swinging
at anchor
* Enjoy crisp reception with your TV or FM radio
* Complete kit to enable TV and radio reception in your boat or motor home
* Compatible with Freeview HD
* Covers all television and FM radio bands
* Supplied complete with antenna mast and installation kit
* Easy to install
Fully active antenna system for optimum reception.
Kit comprises of instalation kit, power injector & TV cable.
Part Number : P8022
VHF/Cellular Stainless Steel QuickFit
Mount
Antenna Adjustable Base - QuickFit
Heavy Duty
Can be used for LongReach Pro Series Quick fit VHF or cellular
antennas.
For VHF/Cellular or Am/FM antennas
with quick fit attachments.
5m of cable is wired into the mount.
Base Plate Dimensions: 93 x 66mm
5m of cable is wired into the mount.
Base Plate Dimensions: 93 x 66mm
Use in side or deck mount
installations.
Part Numbers :
P6151 (VHF)
P6154 (AM/FM)
Part Number : P6159
169
E l e c t r o n i c s - Aerials Accessories
Antenna Base - Fixed Position
Adjustable Base for VHF Antenna
Antenna Base - Fixed Position
UV stabilised nylon
70mm diameter base, 40 mm or 100mm high
Two models available - Select part for
pricing
White nylon antenna base.
Rachet allows for full fold down.
Part Numbers :
54042 - 40mm high
54044 - 100mm high
VHF/Cellular Through-Deck Mount
Through deck mount, for use with SeaMaster VHF or Cellular
antennas
Suits aerials with the QuickFit style
fitting.
Stem diameter: 16mm, Base diameter:
35mm
Part Number : P6115
Antenna Base Rail Mount - QuickFit
Antenna Base Rail Mount - QuickFit
VHF/Cellular or AM/FM rail mount
for 1” pipe.
5m cable attached to this base.
Only suitable for QuickFit Antennas
Part Numbers :
7356 - VHF/Cellular
P6118 - AM/FM
Standard fitting not “QuickFit”
Part Number : 54040
Antenna Adjustable Base - QuickFit
Adjustable Base to suit QuickFit style
aerials
5m Cable is attached to base which
allows the antenna to be easily
removed and remounted.
Part Numbers : AA000226 (VHF)
P6114 (AM/FM)
10m Extension Cable VHF
VHF antenna 10m extension cable pack.
Cable is fitted with a FastFit socket to connect to existing cable,
and FastFit plug to enable connection with the P1217 to the VHF
radio.
P6020 extension cable can be used
with:
* SeaMaster Pro Series VHF mounts
* SeaMaster VHF antennas
* LongReach Pro Series VHF mounts
* LongReach VHF antennas
Part Number : 7361
Antenna Base Rail Mount
5m extension cable
VHF Antenna Base Rail Mount
For standard fitting not “QuickFit”
5m extension cable
Select VHF or AM/FM for pricing
Part Number : 7357
Part Numbers :
7360 (VHF)
P7102 (AM/FM)
VHF / AM / FM - band splitter
VHF / AM / FM broadcast band splitter / diplexer, with VHF
and car radio plugs.
This splitter enables the use
of a VHF antenna to provide
AM/FM reception, without
degrading the performance of
the VHF.
Part Number : 7412
170
FastFit Jack
Parts to make up plug as per picture.
Part Number : P1212
VHF Cable Joiner
SO239 Joiner for VHF Cable.
Part Number : P1059
N a v i g a t i o n - Compasses
Lalizas - Ritchie B51
Ritchie accuracy and mounting versatility are the perfect combination with Explorer
Bracket Mount Compasses.
Dimensions: 119mm(H)
Dial Size: 69mm
Night Lighting: 12-Volt Green
5 Year Warranty
Part numbers :
31240 (Black)
31241 (White)
31242 (Grey)
Lalizas - Ritchie Explorer S-53 Surface Mount Compass
The Explorer Surface Mount compasses combine size and accuracy with a push
button system for easy-on mounting, easy-off storage and security.
Dimensions: 73mm(H) x 92mm(W),
Dial Size: 69mm
Night Lighting: 12-Volt Green
Compensators: Built-in
5 Year Warranty
Part number : 31250
(Black)
Lalizas - Ritchie Sport X-10b-M Bracket Mount
Compass
Mount it on your deck, windsheild or dash. Here’s a compass that’s just the right size
for small boats or sport vehicles.
Dimensions: 55mm(H) x 73mm(W)
Dial Size: 2” / 51mm
Night Lighting: 12-Volt Green
Part Number : 31201
(Black)
Compass Bracket Mount
Compass - Bracket Mount
Easy read with a wide 55mm
diameter dial.
Built-in compensating magnets for
added accuracy.
Includes Backlight
Dimensions: 130mm(H) x Ø78mm
Dimensions: 75mm (h) x 55 (w)
OA width: 85mm
Part Numbers :
70032-BK (Black)
70032-WH (White)
Part Numbers :
70031-BK (Black)
70031-WH (White)
171
N a v i g a t i o n - Binoculars
Binoculars Sea Nav SAF 7x50 Autofocus
This is a light and easy to use set of binoculars that will help you in your navigation during your cruising. The Binoculars
Auto ‘Sea Nav’SAF 7x50’ combine perfectly 7x
magnification power, ruby red coating of the
objective lens filtering out red light and Porro K9
prisms for brighter images.
Additionally, it offers the convenience of the autofocus, with a wide field of view of 133m at 1000m.
It also features foldable eyecups for those wearing
glasses. Its rugged construction with rubber
armouring will protect the binoculars, and offer
you a better grip, even when the hands are wet.
The binoculars ‘Sea Nav’SAF 7x50’ come complete
with strap, pouch and covers for the lenses.
Weight: 750gr
Dimensions: 190 x 200 x 65mm
Part Number : 31317
Binoculars - 8 x 21 Centrefocus with carry case
Being light and compact, the ‘Sea Nav’ Centre focus 8x21 binoculars are a must for every sailor.
The 128m@1000m field of view, the 2.6mm exit
pupil, the centre focus and the roof prisms provide
you with high quality, comfortable vision during
the day. The housing is shock resistant, while
the rubber armouring allows a better grip, and
protects the binoculars from impacts. Additional
features are the folding eyecups, ideal even for
those wearing glasses. The Compact ‘Sea Nav’
CFC 8x21 binoculars are supplied with a carry
case, which can be attached to a belt.
Weight: 176gr
Dimensions: 97 x 103 x 30mm
Part Number : 31318
172
N a v i g a t i o n - Clocks & Weather Stations
Time & Tide Clock
Barometer Open Dial Brass
Dimensions:
Base Diameter - 180mm
Face Diameter - 140mm
Depth 43mm
The open dial allows clear visibility to view the brass aneroid
movement.
Displays both barometric
scales; inches of mercury and
millibars.
Part Number : 11700
Clock Classic
Sailing Ship
Classic Sailing Ship Design
Brass (5”) 125mm Face
Part Number : 11704
Base Diameter - 180mm
Face Diameter - 140mm
Part Number : 11702
Barometer & Thermometer
Displays Temperature in Celcius
& Farenheit & both barometric
scales; inches of mercury and
millibars.
Base Diameter - 180mm
Face Diameter - 140mm
Brass Ships Clock
Part Number : 11703
Roman Numerals for Hours
Base Diameter - 112mm
Face Diameter - 106mm
Depth 48mm
Ships Clock in 15” Timber Wheel
Part Number : 70014
Brass Barometer
Base Diameter - 112mm
Face Diameter - 106mm
Depth 48mm
Part Number : 70045
The solid brass clock is
mounted within a lovely turned
and doweled solid oak ship
wheel. Complete with brass
mounting hanger on the back.
Dimensions:
Clock Face - 82mm
Timber wheel OA - 390mm
Part Number : 73002-15C
Thermometer / Hydrometer / Clock
Clock with wooden base
Wooden with 2 pen holders.
Length 272mm x Width 47mm x Height 180mm
Dimensions: (L) 217mm x (W) 28
mm x (H) 80mm
Part Number : 11890
Part Number : 11888
173
Engine & Outboard
Accessories
176. Martyr
Anodes
Yanmar Saildrive Split Anode Kit
Volvo Penta 290 Dual Prop Engine
Anode Kit
Rudder Anodes
Hull Anode - Divers Dream
Bolt on Hull Anodes
Hull Anodes with Wire
Medium Streamline Hull Anode
Large Streamlined Hull Anode
Tear Drop Hull Anodes
Prop Nut Anodes - Complete Kit
Replacement Prop Nut Anodes
Zinc Engine Cooling Anodes
Replacement Zinc Engine Cooling
Anodes
Clamp Shaft Anodes
Streamline Shaft Anodes
Limited Clearance Shaft Anodes
180. ZF Engine
Controls
ZF Engine Controls
182. Engine
Controls
Twin Engine Control - Dual Action
levers
Single Engine Control - Dual Action
lever
Single Engine Control
Twin Engine Control
Throttle & Shift Control Levers
Throttle Control - Single Lever
Throttle Cables
183. Fuel Fittings
MaXtek Primer Bulbs
Yamaha & Mercury Connectors
Johnson & Evinrude Connectors
Yamaha Connectors
Mercury - 2 Prong Connectors
Johnson & Evinrude Connectors
Yamaha & Mercury Connectors
Yamaha Connectors
Brass Shut Off Valve
Johnson & Evinrude Viton O-Ring
Connectors
MaXtek Fuel Line Assembly for
Yamaha
MaXtek Fuel Line Assembly for
Mercury (New Style)
MaXtek Fuel Line Assembly for
Mercury (Old Style)
MaXtek Fuel Line Assembly for
Johnson & Evinrude
MaXtek Universal Fuel Line
MaXtek Fuel Line Assembly for
Mercury (Bayonet Fittings)
Marine Fuel Hose #365
MaXtek Fuel Tank - 6 Gallon
MaXtek Anti – Siphon Valve Tank
Fitting
Suzuki Tank Fitting
186. Fuel Filters
MaXtek Fuel Filter / Water
Separator
MaXtek Fuel Filter / Water
Separator
MaXtek Fuel Filter / Water
Separator -90GPH
MaXtek Fuel Filter / Water
Separator Kit
MaXtek Fuel Filter / Water
Separator
MaXtek Fuel Filter / Water
Separator-60GPH
Universal In-Line Fuel Filter
MaXtek Inline Fuel Filter
Steering Wheel 13” Plastic
Safety Lock for Outboards
190. Steering
Fittings
195. Salt-Away
Grommet - Cone with Ring
Steering Cable Cone and Ring
Steering Cable Grommet
Top Hat - Round
Top Hat - Oval
Split Well Grommet
Steering Cable Rubber Cone
Trim Ring - Round
Trim Ring - Oval
Rubber Exhaust Cover
Stainless Steel Exhaust Transom
Fitting
Salt-Away 946ml Concentrate +
Mixer
Salt-Away 946ml Concentrate
196. Manual
Extraction Pumps
14 Litre Oil Extraction Pump
Hand Oil Pump with Brass Body
6.5 Litre Extraction Pump
6L Extraction Pump - Round Body
4 Litre Extraction Pump
Suction Hand Hose
191. Outboard
Brackets
25hp Stainless Steel Platform Rise
& Fall Bracket
Outboard Bracket to 50kg
Outboard Rise & Fall Bracket
Retractable Outboard Motor
Bracket
Fixed Platform Outboard Bracket
Fixed Low Platform Outboard
Bracket
Rail Mount Aux Outboard Bracket
Outboard Transom Pad
Outboard Motor Support Bracket
187. Steering
192. Outboard
Accessories
Hydrive Hydraulic Steering Kit
Cable Steering Kits for Outboards
Transom Support Mounting Kit
Steering Engine Well Mounting Kit
Expandable Braided Sleeving
Bulkhead Strain Relief
Outboard Rigging Hose and Flange
SS Steering Wheel 15.5”
SS Steering Wheel 15.5” with
White Grip
SS Steering Wheel 13.7” with
Black Grip
Steering Wheel - Riviera black
Outboard Trolley
PropGuard
LZ Hydrofoil for Outboard Motors
Outboard Flag
Outboard Flusher - Dual Flush
Outboard Flusher - Single Flush
MaXtek Motor Flusher with Oval
Cups
MaXtek Motor Flusher with
Rectangular Cups
Outboard Extension Handles
Outboard Transom Wedges
175
E n g i n e & O u t b o a r d - Anodes
Martyr Marine Anodes
Martyr™ marine Anodes provide low cost cathodic protection of ocean-going vessels, structures and
equipment constructed of iron, steel, aluminum, magnesium, and other metals. Martyr is a division
of the Canada Metal company and is the only manufacturer that offers all three alloys for all water
environments for pleasurecraft and commercial.
Martyr Aluminium Marine Anodes
By adding small amounts of Indium to aluminium a superior better performing anode is produced.
Recognised and used by all of the major engine and stern drive manufactures, Aluminium anodes are a better option in
protecting your boat.
Benefits of Martyr Cadmium Free Anodes
* Environmentally friendly, our Martyr II Aluminum and Martyr III Magnesium Cadmium Free anodes are much lighter than the
traditional zinc anode that they replace. Resulting in significant savings of fuel to transport and energy to install.
* Improved efficiency and performance of Cadmium Free Martyr II Aluminum Anodes results in longer life and improved
corrosion protection thereby reducing the quantity of anodes required and increasing the time between replacements.
* The alloy components of our Martyr II Aluminum anode contain no cadmium and only a fraction of the zinc used in making
traditional zinc anode. The two remaining components, Aluminum and Indium are non-toxic.
Features:
*Better for the environment
*Last longer
*1/2 the weight of zinc
*3.5 times more energy and protective power than zinc
Yanmar Saildrive Split Anode Kit
Rudder Anodes
Martyr Cadmium Free Anode.
Rudder Anodes - Aluminium
Martyr Cadmium Free Anode.
Aluminium Anode for Salt Water and
Brackish Water.
Aluminium Anode for Salt Water and
Brackish Water.
Fits Yanmar SD20, SD30, SD31, SD40
and SD50 Saildrives.
Part Number : ANO1964402660KITA
Volvo Penta 290 Dual Prop Engine
Anode Kit
Martyr Cadmium Free Anode.
Aluminium Anode for Salt Water and
Brackish Water.
Fits Volvo 290 Dual Prop Engine
Part Number : ANO290DPKITA
176
Part Numbers :
ANOR01AL
47mm Diameter
6mm Thick each half
Weight: 0.03kg
ANOR03AL
95mm Diameter
12mm Thick each half
Weight: 0.374kg
ANOR02AL
71mm Diameter
12mm Thick each half
Weight: 0.2kg
ANOR04AL
127mm Diameter
16mm Thick each half
Weight: 0.57kg
E n g i n e & O u t b o a r d - Hull Anodes
Hull Anode - Divers Dream
Hull Anode Divers Dream - Slotted Bolt On - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Dimensions:
13mm x 152mm x 305mm (½” x 6” x 12”)
Weight: 1.48kg
Part Number : ANODIVERA
Bolt on Hull Anodes
Hull Anodes with Wire
ZHC Series Bolt on Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Wire on Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Numbers :
Part Numbers :
ANOZHC2AA
Dimensions: 146mm x 64mm x 19mm
13-19mm bolt holes spaced at 73mm
Weight: 0.37kg
ANOPMWA
Dimensions: 114mm x 64mm x 17mm
Weight: 0.35kg
ANOZHC3AA
Dimensions: 159mm x 70mm x 19mm
13-19mm bolt holes spaced at 57mm
Weight: 0.37kg
ANOZHC5AA
Dimensions: 203mm x 102mm x 19mm
13-19mm bolt holes spaced at 111mm
Weight: 0.79kg
ANOPNWA
Dimensions: 152mm x 76mm x 19mm
Weight: 0.57kg
ANOPOWA
Dimensions: 152mm x 102mm x 19mm
Weight: 0.77kg
ANOPPWA
Dimensions: 229mm x 127mm x 21mm
Weight: 1.63kg
Medium Streamline Hull Anode
Medium Streamline Bolt On Anode - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Number :
ANOMM30A
Dimensions: 235mm x 86mm x 19mm
13mm bolt holes
Weight: 0.69kg
Large Streamlined Hull Anode
Large Streamlined Bolt On Anode - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Tear Drop Hull Anodes
Tear Drop Bolt On Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Numbers :
ANOT20A
Dimensions: 89mm x 45mm x 35mm
6mm bolt holes spaced at 32mm
Weight: 0.07kg
ANOT21A
Dimensions: 133mm x 51mm x 25mm
8mm bolt holes spaced at 41mm
Weight: 0.18kg
Part Number :
ANOMZC406A
Dimensions: 219mm x 108mm x 25mm
13mm bolt holes spaced at 127mm
Weight: 1.19kg
177
E n g i n e & O u t b o a r d - Engine & Prop Nut Anodes
Prop Nut Anodes - Complete Kit
Prop Nut Anodes Complete Kit - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Numbers Shaft Size ANOPNBAC11 7/8” (22mm) ANOPNCAC10 1” (25mm) ANOPNDAC09 1 1/4” (32mm) ANOPNEAC08 1 3/8” (35mm) Length 2 1/8” (54mm) 3” (76mm) 3 1/16” (78mm) 3 1/2” (89mm) OD 1 5/8” (41mm) 1 7/8” (48mm) 2 1/8” (54mm) 2 3/8” (60mm) Weight
0.21kg
0.35kg
0.6kg
0.65kg
Replacement Prop Nut Anodes
Replacement Prop Nut Anodes only - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Numbers :
ANOPNAB - B Replacement - suits shaft size 22mm
ANOPNAC - C Replacement - suits shaft size 22mm & 29mm
ANOPNAD - D Replacement - suits shaft size 32mm
ANOPNAE - E Replacement - suits shaft size 35mm
Zinc Engine Cooling Anodes
Zinc Pencil Anodes complete with Brass Plug
Zinc Anodes for Salt Water and Brackish Water.
Part Numbers Length ANOE00 2” (51mm) ANOE0 1 3/4” (45mm) ANOE1
1 3/4” (45mm) ANOE2 2” (51mm) ANOE3 2” (51mm) Diameter 1/4” (6mm) 3/8” (10mm) 1/2” (13mm) 5/8” (16mm) 3/4” (19mm) NPT 1/8” 1/4” 3/8” 1/2” 3/4” UNC 1/4” 5/16” 3/8” 7/16” 1/2” Weight
0.02kg
0.04kg
0.08kg
0.13kg
0.21kg
Replacement Zinc Engine Cooling Anodes
Zinc Pencil Anodes Only, no brass plug.
Zinc Anodes for Salt Water and Brackish Water.
Part Number Length ANOEZ0 1 3/4” (45mm) ANOEZ00 2” (51mm) ANOEZ1 1 3/4” (45mm) ANOEZ2 2” (51mm) ANOEZ3 2” (51mm) ANO272100200300Z Yanmar 1 1/8” (29mm) Diameter 1/4” (6mm) 3/8” (10mm) 1/2” (13mm) 5/8” (16mm) 3/4” (19mm) 3/4” (19mm) NPT 1/4” 1/8” 3/8” 1/2” 3/4” 3/8” Weight
0.02kg
0.01kg
0.05kg
0.07kg
0.1kg
0.07kg
Yanmar ANO272100200300Z anode
178
E n g i n e & O u t b o a r d - Shaft Anodes
Clamp Shaft Anodes
Clamp Shaft Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
* Full Shaft Contact - Internal Steel Clamp Insert holds the anode completely tight to the
shaft.
* Easy installation Underwater - Slotted head with lock washer & bolt retaining washers that
prevent the anode from falling off.
Part Numbers Internal Diameter (mm) External Diameter (mm) Length (mm)
ANOXC01A 3/4” = 19mm 56mm 65mm
ANOXC03A 1” = 25.4mm 56mm 65mm
ANOXC05A 1 1/8” = 28mm 54mm 54mm
ANOXC07A 1 1/4” = 32mm 63mm 63mm
ANOXC09A 1 1/2” = 38mm 63mm 63mm
ANOXC25A 25mm 56mm 65mm
ANOXC35A 35mm 70mm 78mm
ANOXC40A 40mm 70mm 78mm
ANOXC50A 50mm 85mm 100mm
Streamline Shaft Anodes
Streamline Shaft Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
* 100% Circular Radius
* Interlocking halves with extra alloy around fastener
Part Numbers I.D. (mm) ANOX01AL 19mm ANOX03AL 25mm ANOX05AL 32mm ANOX07AL 38mm ANOX08AL 44mm ANOX09AL 51mm ANOX11AL 63mm ANOX13AL 76mm O.D. (mm) 54mm 54mm 63mm 63mm 82mm 82mm 106mm 120mm Length (mm) 54mm 54mm 63mm 63mm 73mm 73mm 95mm 92mm
Weight (kg)
0.077kg
0.082kg
0.114kg
0.159kg
0.232kg
0.286kg
Limited Clearance Shaft Anodes
Limited Clearance Shaft Anodes - Aluminium
Aluminium Anode for Salt Water and Brackish Water.
Part Numbers Inside Dia ANOC03AL 1” (25mm) ANOC05AL 1 1/4” (32mm) Outside Dia 2 1/2” (63mm) 2 1/2” (63mm) Length
1 1/4” (32mm)
1 1/4” (32mm)
FLEXOFOLD™ Prop Anode
Fits standard 3-blade Flexofold propellers from 15” through 24”
Aluminium Anode for Salt Water and Brackish Water.
Part Number :
ANOPNFXA
Base Diameter: 2-5/8”
Weight: 0.188kg
179
E n g i n e & O u t b o a r d - ZF Engine Controls
ZF Engine Controls
ZF Marine’s propulsion control systems are at the leading edge of electronic technology for boat
engine control. The product incorporates well-proven hardware and software to ensure reliability,
easy operation and maintenance. A wide range of systems means optimum equipment can be
chosen to specifically match the type of vessel or application – single engine, multi-engine or
multi-station.
Standard features of the ZF Range
Start interlock - prevents the engine from starting while the transmission is in gear.
Warm up mode - enables engine speed only with the transmission locked in Neutral. This allows the engine to get up to operating
temperature more quickly in preparation for departure. Warm up mode is also useful for engine testing.
Cruise mode - is the standard operating condition. In this mode the operator has single lever control of clutch and throttle with one
lever for each engine. Two engine systems can easily be operated with one hand.
Single lever mode - allows for twin engine operation of shift and throttle control utilizing one single lever.
Part Number:
ZF460-4
ZF463-4
ZFMC2000-2
ZF4200
MiniCommand - Positive Control, Compact, Simple, Affordable
MiniCommand provides single lever control of electronically actuated diesel engines and marine transmissions in a robust, compact
package.
Designed for pleasure craft and some light duty commercial vessels up to 50 feet in length with a maximum of two control stations, the
MiniCommand control processor incorporates the logic circuits for two engines in one compact package. This single unit design allows the
MiniCommand processor to fit in smaller spaces while maintaining two completely separate operating systems.
MiniCommand can be equipped with the same control heads as the MicroCommander, CruiseCommand, and ClearCommand control
systems. In addition, ZF Marine Electronics introduces the new 4200 Series control head a derivative of the popular 5200 series
SmartCommand control head.
MiniCommand is a reasonably priced control system having features of control systems costing significantly more. MiniCommand
continues the ZF Marine Electronics tradition of making boat handling and docking easy and effortless.
180
E n g i n e & O u t b o a r d - ZF Engine Controls
MiniCommand Technical features
*Compatible with 12 or 24 volt systems.
*Diesel and Petrol engines.
*Maximum two stations.
*Analog throttle output (PWM, 4-20MA, 0-5V, Frequency, Dual Voltage)
*CAN Interface (available).
*Twin screw application built into one enclosure, with two microprocessors for
redundancy (one for each engine and gear).
*Single lever control of transmission direction and engine speed.
*Proportional pause on emergency reversal protection.
*Two on/off solenoid outputs for transmission control (ahead and astern
clutches).
*Start interlock relay contacts for safe engine start.
*Daylight viewable LEDs (light emitting diodes) for status indication.
MI2002 - MiniCommand Processor
*Audible tones for warnings and faults.
*Push buttons and display for ease in set up and troubleshooting.
*“Open loop” synchronization of engine speed.
*The MiniCommand processor is designed with side mounted plug connectors for quick and easy installations and neatly organized cable
routing.
*DNV & GL type approved for Ships, High Speed and Light Craft
Available Options for MiniCommand
MiniCommand is compatible with ZF Marine Electronics 400, 700, MC2000,
and 4000 series pluggable control heads. Tournament levers and handheld
controls can also be utilized.
Automatic power selector - offers increased
power supply redundancy.
“Open loop” trolling valve control - available for transmissions
with electronic trolling valves. This feature controls clutch slippage for hull
speeds lower than engine idle rpm. The same control heads used for clutch and
throttle enable trolling valve operation in an unlimited range without additional
switches. The MiniCommand processor can be ordered with or without trolling
function.
Also Available in the ZF Range
MicroCommander –
For mechanical throttle and transmissions.
Up to 5 control stations.
ClearCommand –
For combinations of mechanical and electric throttle and transmissions.
Up to 5 control stations.
CruiseCommand –
For electrical throttle and transmissions.
Up to 4 control stations.
SmartCommand –
For electronic throttle and transmissions.
Up to 6 control stations.
Control heads specific to Smart Command processors.
The 5200 Control Head is specific to the
SmartCommand processors.
Please contact us for more information about packages suitable for your needs.
181
E n g i n e & O u t b o a r d - Engine Controls
Twin Engine Control - Dual Action levers
Both gear operation and throttle is achieved on the single lever. Two levers for control of two
engines. Classic binnacle styling with dual function levers. Suitable for inboards, outboards and
stern drives. Not suitable for engines with heavy governor loads. Suitable for most boat/engine
combinations using control cables for throttle or gears. Dual station capability (requires separate
exchangers)
Designed for use with Morse style cables; series 080 with Type “C” connection ends. Compatible
with MT-3 type top mount controls. Cables available in different lengths.
Part Number : 60062
Single Engine Control - Dual Action lever
Both gear operation and throttle is achieved on the single lever.
Designed for use with Morse cables. Cable series 080 with Type “C” connection ends.
A chrome plated zinc alloy housing with Stainless Steel internal parts.
Part Number : 60060
Single Engine Control
Single lever cable control for
throttle or gears.
Designed for use with Morse
type cables.
Chrome Plated Brass
Part Number : 60057
Throttle & Shift
Control Levers
Chrome Plated Brass
Part Number : 60053
Twin Engine Control
Throttle Control - Single Lever
Twin Control for two throttles
or clutches on a twin engine,
or one clutch and one throttle
on a single engine.
Designed for use with Morse
type cables.
Simple single lever control
commonly used for throttle.
Chrome Plated Brass
Part Number : 60052
Chrome Plated Brass
Part Number : 60058
Throttle Cables
High Performance Engine Control Cables providing all the best features:
• Patent pending splined core for superior response and feel, especially in the toughest shift cable routing.
• Black HDPE outer casing for environmental durability
• Steel armour casing
• Teflon inner core to ensure extremely low friction
• High tension strength with small bending radius
• Exceeds all industry boat standards
• State-of-the-art manufacturing assures consistency
• Manufactured and certified to ISO 9001 / 2000
Part Numbers : 60080 (5 m cable)
60085 (5.5 m cable)
182
E n g i n e - Fuel Fittings
MaXtek Primer Bulbs
Two sizes
Built-in one way valve.
Available in Blister Packs
2105 - Fits 5/16” fuel line.
2106 - Fits 3/8” fuel line.
Part Numbers :
2105
2105-BP (Blister Packed)
2106
2106-BP (Blister Packed)
Yamaha & Mercury Connectors
Female Fuel Tank Connector
for Yamaha & Mercury
For use with 6mm internal
diameter hose.
Part Numbers :
2052N
2052N-BP (Blister Packed)
Johnson & Evinrude Connectors
Female Fuel Tank Connector
for Johnson & Evinrude OMC
For use with 6mm internal
diameter hose.
Part Numbers :
2044N
2044N-BP (Blister Packed)
Yamaha Connectors
Female Fuel Tank Connector
for Yamaha
For use with 6mm internal
diameter hose.
Part Numbers :
2054N
2054N-BP (Blister Packed)
Mercury - 2 Prong Connectors
2 Prong Female Fuel Hose Connector
To Suit: Mercury
For use with 6mm internal
diameter hose.
Part Numbers :
2053N
2053N-BP (Blister Packed)
Johnson & Evinrude Connectors
Male Fuel Tank Connector
for Johnson & Evinrude OMC
Part Numbers :
2042N
2042N-BP (Blister Packed)
Yamaha & Mercury Connectors
Male Fuel Tank Connector
for Yamaha & Mercury
Part Numbers :
2050N
2050-BP (Blister Packed)
Yamaha Connectors
Brass Male Fuel Tank Connector for Yamaha
Part Numbers :
2055
2055-BP (Blister Packed)
Suzuki Tank Fitting
To Suit: Suzuki OMC
Part Number : 2040N
Brass Shut Off Valve
Constructed of forged brass and highly recommended fuel line
installation.
Multitude of uses:
*Marine fuel and oil lines
*Isolate or connect two fuel tanks
*together
*Motorcycle fuel lines
*Car Fuel lines
Female 1/4” NPT threads on each end
Part Number : 142073
Johnson & Evinrude Viton O-Ring
Connectors
Viton O-Ring Female Fuel Tank Connector
for Johnson & Evinrude OMC
For use with 6mm internal diameter hose.
Part Numbers :
2032
2032-BP (Blister Packed)
183
E n g i n e - Fuel Lines Kits
MaXtek Fuel Line Assembly for
Yamaha
Includes Primer bulb and 3/8” alcohol resistant fuel line hose
MaXtek Fuel Line Assembly for
Johnson & Evinrude
Suits Mercury 1988-98, Mariner 1988-98 and Yamaha
Includes Primer bulb and 3/8” alcohol resistant fuel line hose
* Reinforced fuel hose
* UV stabilised primer bulb
* Fitted with motor and
tank fittings
* 2m length x 8mm ID hose
* 2 year warranty
Suits Johnson/Evinrude Outboard Engines
Part Numbers :
2026
2026-BP (Blister Packed)
MaXtek Fuel Line Assembly for
* Reinforced fuel hose
* UV stabilised primer bulb
* OEM 398549 Female
Tank/Engine Connectors
* Fitted with motor and
tank fittings
* 2.1m length x 8mm ID
hose (10mm OD hose)
* 2 year warranty
Mercury (New Style)
Part Numbers :
2030
2030-BP (Blister Packed)
Includes Primer bulb and 3/8” alcohol resistant fuel line hose
MaXtek Universal Fuel Line
Suits Mercury 1998 and Newer.
8mm (5/16)” fuel line x 2 metres long
* Reinforced fuel hose
* UV stabilised primer bulb
* Fitted with motor and
tank fittings
* 2m length x 8mm ID hose
* 2 year warranty
Includes Primer Bulb fitted with stainless steel clamps. Engine
fittings not included.
Part Numbers :
2024
2024-BP (Blister Packed)
Part Numbers :
2027
2027-BP (Blister Packed)
MaXtek Fuel Line Assembly for
MaXtek Fuel Line Assembly for
Mercury (Old Style)
Mercury (Bayonet Fittings)
Includes Primer bulb and 3/8” alcohol resistant fuel line hose
Includes Primer bulb and 3/8” alcohol resistant fuel line hose
Suits Mercury 1998 and older
Suits Mercury with
Bayonet Fittings
* Reinforced fuel hose
* UV stabilised primer bulb
*OEM 30185A3 Mercury Male Tank Connector
*OEM 20750 Mercury Engine Connector
* Fitted with motor and
tank fittings
* 2.1m length x 8mm ID
hose (10mm OD hose)
* 2 year warranty
Part Numbers :
2028
2028-BP (Blister Packed)
184
* Reinforced fuel hose
* UV stabilised primer bulb
* OEM 30185A3 Mercury
Male Tank Connector
* OEM 22831A3 Mercury
Female Engine Connector
* Fitted with motor and tank fittings
* 2.1m length x 8mm ID hose (10mm OD
hose)
* 2 year warranty
Part Number : 2029
E n g i n e - Fuel Lines & Tank Fittings
Marine Fuel Hose #365
Trident Barrier Lined A1 Fuel Hose (Distribution, Return, Vent and Transfer) for both gasoline (petrol) and diesel (including alcohol
blends). Exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, and USCG Type A1; and is NMMA Type Accepted and CE certified.
Built with best fuel, fire and age resistant formulation, 2 spiral reinforcement and unique “Barrier Liner” on inside surface of
tube so fuel is not in direct contact with rubber. Provides extraordinary
resistance to fuel permeation and aging, as well as fire, heat, cold and
ozone. Also good Bend-ability.
5 Year Warranty
Part Numbers :
FUEL08 - Fuel Hose 8mm
FUEL10 - Fuel Hose 10mm
FUEL12 - Fuel Hose 12mm
FUEL16 - Fuel Hose 16mm
MaXtek Fuel Tank - 6 Gallon
Modern strong Fuel tank manufactured by maXtek.
Comes with a built-in fuel gauge, sturdy handle and a rugged ergonomic design means it’s perfect for the boat.
Supplied complete with fuel tank pickup with 1/4” BSP internal thread.
Fuel tank adaptors are sold separately. Adaptors must be ordered separately to suit the outboard make and model.
* Manufactured from UV stabilised polyethylene
* Features an easy top read fuel gauge
* Easy carry moulded handle
* Light weight
* Rust proof
* Crack resistant
* Will not mark gelcoat
* Tank will not dent
Capacity:
22.7 Litres
6 US gallons
Dimensions: 580mm x 285 mm x 220 mm
Part Number : 2023
MaXtek Anti – Siphon Valve Tank Fitting
Fits 3/8 inch ID fuel hose.
Industry standard anti-siphon protection on all gasoline-powered boats.Combines
anti-siphon protection with a convenient hose barb design.
Features 1/4 NPT threads.
In a convenient Blister Pack for easy display.
Part Number : 2031-BP
185
E n g i n e - Fuel Filters
MaXtek Fuel Filter / Water Separator
* With aluminium mount
* Complete with Fuel line
connections 3/8” x 1/4” NPT
* 10 micron
* For 2 and 4 stroke engines
* 240 LPH (60GPH)
* Fuel filter element
Compatible as Racor S3213;
11/16”-16 UNF thread as used
in Yamaha and Mercury Outboards
Part Numbers :
2060
2060-BP (Blister Packed)
MaXtek Fuel Filter / Water
Separator Kit
Includes: Clear bowl, Water
separator, Fuel filter element and
Cast aluminium mount.
10 micron filter
60 GPH
Compatible as Racor #S3213,
11/16”16 UNF thread as used in Yamaha and
Mercury Outboards
Petrol only and Spare filters available (2069)
MaXtek Fuel Filter / Water Separator
Part Numbers :
2066 (includes mounting bracket - as pictured)
2066 - BP (Blister Packed)
* 11/16”-16 UNF thread
* Closed type Filter/Separator
* 240L/hr (60GPH)
MaXtek Fuel Filter / Water Separator
Suit Yamaha and Mercury outboards
with external fuel filters. Replaces
Mercury - 35-802893Q Yamaha ABB-FUELF-IL-TR
Part Numbers :
2062
2062-BP (Blister Packed)
MaXtek Fuel Filter / Water Separator
-90GPH
Replacement filter/water separator traps water and dirt.
10 micron filter eliminates harmful
contaminants and removes 99% of
emulsified water.
*10 micron for inboard and outboard 2
and 4 stroke engines
*340 LPH(90GPH)
*Fuel filter element
*Spin on
*Petrol only
Specifications:
Compatible as Racor S3214;
Sierra No. S18-7920
OMC No. 771839
Mercury No. 35-809099
Connection Thread: 1” centre thread - 12 threads per inch
Part Numbers :
2064
2064 - BP (Blister Packed)
186
Includes: Clear bowl, Water
separator, Fuel filter element
10 micron filter
60 GPH
Compatible as Racor #S3213,
11/16”16 UNF thread as used in
Yamaha and Mercury Outboards
Petrol only and Spare filters available (2069)
Part Numbers :
2068 (no bracket - screws straight onto engine)
2068 - BP (Blister Packed)
MaXtek Fuel Filter / Water Separator
-60GPH
* Filter Designed to be used with
screw-on clear bowl (not included)
* Canister with 11/16”-16 UNF thread
* 240L/hr (60GPH)
Compatible as Racor S3213; 11/16”-16 UNF
thread as used in Yamaha and Mercury
Outboards
Part Number : 2069
E n g i n e & O u t b o a r d - Fuel Filters & Steering Kits
MaXtek Fuel Filter / Water Separator
-90GPH
* Filter Designed to be used with
screw-on clear bowl (not included)
* Canister with 11/16”-16 UNF thread
* 340L/hr (90GPH)
Compatible as Racor #PFF5510 ; 11/16”16 UNF thread as used for both inboard and outboard 2 and 4
stock engines.
Part Number : 2070
MaXtek Inline Fuel Filter
OEM Replacement 3/8” Inline fuel filter for Mercury/Mariner,
Johnson and Evinrude applications.
OMC #398319, Sierra #S18-7831
Suitable for premix and oil injected outboard
motors and assembled with a 10 micron
filter media.
Body length: 70mm
Body Diameter: 26mm
Hose Size: 3/8”
Part Numbers :
2074
2074 - BP (Blister Packed)
Universal In-Line Fuel Filter
High Quality Glass in line Fuel filter supplied with connections for 6mm, 8mm and 10mm fuel
hoses.
*Catch dirt and particles before they reach your engine
*Clear body allows visual inspection
*Direct sight bowl indicates level of contamination
*260 micro filter element
Part Numbers :
2072
2072 - BP (Blister Packed)
Hydrive Hydraulic Steering Kit
Hydrive Hydraulic Bull Horn Steering Kit up to 200Hp
HyDrive, Australia’s largest selling hydraulic steering for trailer caft,
offers the finest in smooth, powerful steering with quality and materials
that are built to last. Large horsepower outboards are handled with
comfort and without feedback from engine torque.
This model is hard wearing and robust, made from anodised alumunium,
and ideal for outboards. This model is the perfect alternative to other
alumunium cylinders on the market as it features an electrolytic insulation
design which ensures the most advanced protection against corrosion in
a low priced steering clyinder.
Designed for use with single outboards up to 200HP.
* Easy to install
* Complete kit with everything you need to install
* Full instructions included
* Made in Australia
Part Number: BOSUNKIT-1
187
E n g i n e & O u t b o a r d - Steering Kits
Cable Steering Kits for Outboards
Universal Rotary Steering System
A convenient kit form especially suitable as replacement steering, that includes:
* Helm
* 90° Bezel
* Steering Cable
* Mounting Bolts
* Several Cable lengths available
* ISO 9001:2008 Compliant
Part Numbers : ST13710
ST13712 ST13714 ST13715 ST13716
ST13717 Cable Length :
10 ft cable
12 ft cable
14 ft cable
15 ft cable
16 ft cable
17 ft cable
Transom Support Mounting Kit
Steering Engine Well Mounting Kit
Bolts to the inside of your transom and provides an anchoring point
for the steering cable.
15° Splashwell Mounting Kit
The Mechanical Steering Connection Clamp Block, can be used as
a standoff from the transom
(outboards without tilt tubes) or on a stringer
(inboard model) for the steering cable.
* White powder coated finish
* Aluminium and stainless steel construction
Add this kit to make the splashwell the point at which the
push-pull cable is mounted. Includes threaded tube, splashwell
guard and mounting hardware.
* Ball and socket motion aligns the steering cable automatically
* Corrosion-resistant stainless and aluminium construction
Compatible with TELFEX SA27254
Part Number : ST13800
Part Number : ST13802
Expandable Braided Sleeving
Outboard Rigging Hose and Flange
FLEX is a lightweight, braided jacketing for
bundling and protecting wires, cables and
hoses.
Dress up, protect, and organize your outboard rigging.
These components provide an excellent system to protect cables
and wiring from dirt, abrasion, sun and water. The rigging flange
serves to connect the rigging hose, which comes from the engine,
to the boat. The moulded polypropylene flange is internally
threaded to retain rigging hose and to make rigging adjustment
simple.
Part Number : STFLEX
Bulkhead Strain Relief
* Prevents Kinks and Chaffing in Hydraulic
Steering Hose
* Distributes Strain From Bends in Hose
* Water Tight Gripper Fitting — No Leaks
Flange Diameter: 70mm (Requires 32mm Installation Hole)
NOTE: Only bulk hose can pass through this fitting.
Pre-made hoses with end fittings cannot pass through.
Part Number : STBULK
188
* Choice for most OEM boatbuilders in the U.S.
* Perfect for most applications for an outboard
Part Numbers :
STHOSE - 64mm Hose
STFLANG - Bulkhead Flange
E n g i n e & O u t b o a r d - Steering Wheels
SS Steering Wheel 15.5”
Stainless Steel Steering Wheel
15.5 inch Overall Diameter
Teak Centre Cap
Part Number : 7805
SS Steering Wheel 15.5” with White Grip
316 Stainless Steel
Part Number : 7810W
SS Steering Wheel 13.7” with Black Grip
316 Stainless Steel
Part Number : 7810
Steering Wheel - Riviera black
Hard wearing black plastic construction
350mm diameter
Part Number : VN8001/01
Steering Wheel 13” Plastic
Durable Black Plastic
Part Number : 7812
189
E n g i n e - Grommets , Top Hats , Trim Rings, Exhaust Fittings
Grommet - Cone with Ring
Split Well Grommet
Height: 110mm
Diameter: 72mm
Mounting Depth: 13mm
No Disassembly of
Mechanical Parts Required
When Replacing.
Part Number : 4307
140mm (H) X 120mm dia
Part Number : 4312
Steering Cable Cone and Ring
Height: 65mm
Diameter: 105mm
Part Number : 4309
Steering Cable Rubber Cone
Height: 109mm
Width: 103mm
Mounting Hole: 69mm
Bulkhead Thickness: 5mm
Part Number : 4308
Steering Cable
Grommet
68mm (H) X 105mm Dia
Black or White Colour
Trim Ring - Round
Dimensions:
3-1/2” (Diameter)
2” (Internal Diameter)
Part Numbers :
4311W (White)
4311B (Black)
Part Number : 4305
Top Hat - Round
Trim Ring - Oval
Dimensions:
3-1/2” (Diameter)
X 2-3/8” (Depth)
2” (Internal Diameter)
Dimensions:
3-1/2” (H) x 5-1/4” (W)
2” x 4” (Internal)
Part Number : 4303
Top Hat - Oval
Dimensions:
3-1/2” (H) x 5-1/4” (W)
X 2-3/8” (Depth)
2” x 4” (Internal)
Part Number : 4304
Rubber Exhaust Cover
Part Numbers :
42511 - 75mm to 80mm OD
42512 - 100mm to 105mm OD
190
Part Number : 4306
Stainless Steel Exhaust Transom
Fitting
Stainless Steel Exhaust Transom fitting - 3.0” Hose x 4 3/4”
Flange
Overall length 120mm
Inside diameter 72mm
Outside diameter 125mm
Part Number : 7574S
E n g i n e & O u t b o a r d - Outboard Motor Brackets
25hp Stainless Steel Platform Rise & Fall Bracket
Superior construction means that it is possible to have a motor mounted on this bracket while towing
your boat on the road. No parts to come loose or fall off due to use of pressed stainless steel pivots
and shake-proof fasteners.
25hp maximum standard & 20hp maximum long (20-23”) shaft models. 58kg maximum engine
weight. Applies to both 2 and 4 stroke motors.
Platform to top of timber: 475mm in raised position, 135mm in lowered position.
Vertical movement (adjustment) 340mm (13.3/8”).
Reach: 350mm. Overall width (left/right) 295mm.
Mounting footprint: 263mm fore-aft (front-back). 280mm wide (left-right) (note that the bracket can overhang the platform up to 100mm
thus reducing the fore-aft space required)
Part Number : 72536
Outboard Bracket to 50kg
Rise and Fall Bracket for angled or vertical
transoms.
*Stainless Construction
*Mounts on angled or vertical transom
*Easy Grip Handles
*4 Height Adjustments
*Fits most style of small outboards
*White Poly Plastic Mount
Part Number : 90726
Outboard Rise & Fall Bracket
Max 15HP
Stainless Steel with white pad
*Stainless Construction
*Easy Grip Handles
*4 Height Adjustments
*Fits most style of small outboards
*White Poly Plastic Mount
Part Number : 95880
Retractable Outboard Motor Bracket
Easy to use with quick release locking
mechanism. Locking mechanism at both the
fully raised and lowered position.
*Suitable for outboard auxilary motors up to
8Hp.
*All components made from marine grade
stainless steel.
*Spring loaded frame assists in raising the
outboard to the UP position.
Fixed Platform Outboard Bracket
Fixed Platform Outboard Bracket for 25hp (19kw) rated, 2 or 4
stroke motors.
Lifetime marine grade 3mm stainless steel.
280 wide x 190 high x 245mm long (fore-aft).
Mounting platform depth (fore-aft) required: 210mm minimum.
Height from top of timber to mounting platform: 175mm.
Part Number : 72537
Fixed Low Platform Outboard Bracket
Fixed Low Platform Outboard Bracket for 10hp (7.5KW) or 38kg
rated (20” long shaft motors: 8hp max.).
Lifetime marine grade 3mm stainless steel.
260 wide x 135 high x 310 mm long (fore-aft).
Mounting platform depth (fore-aft) required: 270mm minimum.
Height from top of timber to mounting platform: 95mm.
Part Number : 72538
Part Number : 72532
191
E n g i n e & O u t b o a r d - Outboard Motor Brackets
Rail Mount Aux Outboard Bracket
Ideal for permanently mounting your outboard on the stern rail instead of storing it when not in use.
Constructed from rigid, non-slip UV resistant polypropylene, the bracket provides a secure and
stable mount for your auxiliary outboard engine.
Designed to fit 25mm diameter rails.
Dimensions:
228 x 150 x 46mm
Part Number : 10319
Outboard Transom Pad
This pad is suitable for smaller transoms and outboards. Made from rigid, UV
stabilized plastic,the pad protects against damage whilst providing a secure
non-slip surface for outboard engine mounting.
230mm x 86mm, white
Part Number : 10317
Outboard Motor Support Bracket
Shock absorbing motor support bracket will protect your boat.
The support relieves strain on both the power tilt assembly and the boat transom.
Bracket can be customised to your boat and trailer. Comes with both a quick release and roller
type trailer end. If your trailer has a centre roller at the rear of the trailer you will want
to use the roller mount end. If you don’t have a roller available then mount the quick
release bracket to the frame of the trailer drilling a 8mm hole and using the provided
bolt and nut.
Bracket can be shortened to suit your trailer by cutting the inner tube. Full
instructions and diagram supplied.
Part Number : 159118
Outboard Trolley
Don’t break your back!
This convenient trolley allows you to move and store your small auxiliary outboard motor.
Suitable for medium-sized short or long shaft outboard motors.
Maximum Carry weight: 30kg
180mm tyres make for easy manoeuvring around the driveway or garage.
Aluminium frame and teak outboard attachment.
Comes in a kitset pack and requires some assembly.
Part Number : 72531
192
E n g i n e & O u t b o a r d - Outboard Motor Accessories
PropGuard
PropGuard has been developed to assist in the:
*Protection of swimmers and divers in the water
*Prevention of rope entanglement
*Protect propeller when used in and around rocks and other underwater hazards
*Allowing for safe operation in shallow water
*Give protection to family and friends against serious injury when using an outboard
motor
The Prop Guard is a simple aluminium ring that clamps onto the outboard cavitation
plate and requires nothing more than a few minutes and an Allen key to fit it in
place. The Prop Guard has two vertical protection bars, one either side of the lower
unit that are hydrodynamically shaped to let the water flow over the surface with
minimal resistance. The outer ring is also shaped much like an aeroplane wing with
a thicker leading edge that tapers to the back of the ring.
Part Numbers :
98751 - Up to 5Hp
98752 - Up to 8Hp
98753 - Up to 15Hp
98754 - Up to 30Hp
98755 - Up to 50Hp
LZ Hydrofoil for Outboard Motors
The LZ torque control system ensures the
ultimate in precise and effortless steering.
The features that count:
- Lower fuel consumption
- Straight tracking
- Excellent steering at low speeds
- Smoother ride
- Maximum lift
- Reduced planing time
- Increased stability
- Reduced cavitation
- Effortless installation
- Stainless mounting hardware included.
Part Numbers :
10121 (4 to 50hp)
10122 (over 50hp)
Outboard Flag
Fluro Orange Outboard flag
Optional LED Light for night time towing.
Part Numbers :
OF (Outboard flag)
OFL (Outboard flag + LED light)
193
E n g i n e & O u t b o a r d - Outboard Motor Accessories
MaXtek Motor Flusher with Oval
Cups
MaXtek Motor Flusher with
Rectangular Cups
Blister Packed
Blister Packed
Part Number : 98749
Part Number : 98748
Outboard Flusher - Dual Flush
Speedometer Pitot Pickup
Motor flusher with rectangle cups
allows the cooling systems to be flushed
out using a garden hose.
Pickup for Pitot tube type speedometer.
Please check outboard first as this is a
Dual Flush System.
Part Number : SW17504
Outboard Extension Handles
This Pitot is designed to mount on
the transom. Replacement part for
speedos. This component is often
damaged or blocked.
* Automatic kick up feature to prevent damage
* Can be used with any pressure driven speedo up to
120Km/Hr
Part Number : 152618
* Robust alloy construction
* Easily adusts to suit your application
* Suits tiller handle with up to 46mm
diameter
Part Numbers :
27118 (fixed 995mm)
27119 (telescopic 810-1125mm)
Outboard Transom Wedges
Safety Lock for Outboards
Outboard Transom Wedges - Add 5 Degrees of Tuck
Secure your small outboard engine from theft with this easy to fit
lock assembly.
Improve the performance of your boat by giving your
outboard more tilt control.
These transom wedges fit all standard outboard engines.
Cast aluminium construction allows for full, positive contact
between engine bracket and transom.
*High quality, cast aluminium
*Adds 5 degrees of tuck (negative tilt) to engine
*Improves performance for boats with insufficient transom
angle
*Improves boat planing at low speeds
*Fits standard outboard 4-Bolt Patterns
Dimensions:
Width (oa) 100m
Length (oa): 286mm
Part Number : 4473
194
Anti theft outboard motor locks manufactured from stainless
steel with a plastic end cap. Simply slide over the motor clamp
handles to prevent release. Also added safety and security while
under way as prevents the outboard motor from working loose.
Suits most small outboards including Yamaha and Mercury.
Length: 235 (mm)
Part Number : 99525
E n g i n e & O u t b o a r d - Salt - Away
Salt-Away 946ml Concentrate + Mixer
Comes with the universal quick connector that attaches to your standard hose
and motor flushers connections. Mixing and washdown will now be a breeze
and you can just buy the refills after you have purchased this combo.
Why use Salt-Away?
*Salt-Away combined with our Auto-Mix unit speeds up your cleaning time by at
least 50%
*Removes all traces of salt, minimizing the corrosive effects of salt on your
engine, trailer, vehicle, rods and reels.
*Salt-Away is the most concentrated; Just 40mls is all you need to clean your
boat, motor, trailer and all your fishing gear. Financially that works out to be from
as little as $1.15 per wash.
*Salt-Away is the best value for money - 1 litre of concentrate makes 512 litres.
*Salt-Away, unlike some competitor products available is completely safe on
all metals (including magnesium alloy), rubber and plastics, so won’t harm your
marine equipment. 100% money back guarantee
Salt-Away is recommended by leading Engine Manufacturers, and is used by Royal NZ Navy, NZ Coastguard and NATO
Part Number : CLSALTM
Salt-Away 946ml Concentrate
Mixes up to 512 parts water to one concentrate.
Thats 480 Litres !!
Salt-Away is recommended by leading Engine Manufacturers, and is used by
Royal NZ Navy, NZ Coastguard and NATO
Part Number : CLSALT
195
E n g i n e & O u t b o a r d - Manual Extraction Pumps
14 Litre Oil Extraction Pump
6.5 Litre Extraction Pump
Automatic Shut-Off When
Full, Preventing Overflow.
Extremely handy pump and container makes
this oil extractor a useful tool for engine
maintenance. It is suitable for both oil &
water applications.
Designed for extracting all types of engine
oils, transmission fluids, lubricants. Suitable
for marine engines, stationery engines,
large and small industrial machinery, motor
vehicles and bikes. Can be used on non
lubricants such as water from fish tanks etc.
Part Number : 18549-L
6L Extraction Pump Round Body
Self priming extraction pump.
6L Capacity
Suitable for Oil
Shut off valve to prevent overflow
Part Number : 18548-L
4 Litre Extraction Pump
Self priming extraction pump
4L Capacity
Suitable for Oil
Shut off valve to prevent overflow
Part Number : 18547-S
Suction Hand Hose
*Easy pour spout so liquids can be poured from the container
*Vacuum Relief Valve
*Automatic shut-off valve to prevent over flow
*Self priming extraction pump
*6.5L Capacity
*Suitable for Oil and Water
Part Number : 18547-L
Hand Oil Pump with Brass Body
Manual hand pump for removing oil from
engine sump
A good cheap option for do it yourself
occasional oil changes
Complete with three hoses & adaptor
~ Self Priming Action
Dimensions
Inlet hose: 8mm (Dia) x 700mm
Outlet hose: 11mm (Dia) x 250mm
Pump OD: 32mm
Pump Overall length: 229mm
Part Numbers :
18533
18533 - BP (Blister Packed)
Hose Length: 1.6m
Suitable for Petrol ,Diesel, Oil or Water
1. Place the bottom end of the hose pipe into the tank with the liquid that you wish to
pump out and hold the top end of the hosepipe upright.
2. Shake the bottom end of the hose vigorously up and down until the liquid rises in
the hose. Continue pumping until the liquid passes balance level.
3. Stop pumping and place top end of the hose in the container you wish to fill and the
liquid will flow automatically.
Part Numbers :
70002 (Hose Diameter 19mm)
70003 (Hose Diameter 25mm)
196
Fishing
199. Bait Boards
& Accesories
205. Live Bait
Aerators
Bait Board with Rod Holder Mount
450 x 370mm
Large Bait Board with Mount and
Rod Holders
Bait Board with Rail Mount
High Sided Bait Board
Large Bait Board
Small Plain Bait Board
Sprat Board
Deluxe Bait Board
Long Line Bait Board
Suction Bait and Fillet Board
Adjust a Bite Berley Canister
NZ Anglers Mate Longline Kit
Gourmet Fish Smoker
Gaff
Light Sticks (Cyallum)
Livewell Aerating Pumps
TMC Bait Bubbler
TMC Live bait Aerator Pump Kit
202. Rod Holders
Rod Holder - Wide Head
Rod Holder - Lalizas
Rod Holder - Narrow Head
Rod Holder - Wide Head with Cap
Rod Holder Black - Rectangular Top
Straight Rod Holder - Flush Mount
Rod Holder, PVC w SS Brackets
Straight Rod Holder - Side Mount
Rod Holder, SS w/PVC End Cap
Removable Rod Holder - Deck
Removable Rod Holder - Rail
Removable Rod Holder
Removable Rod Holder - Side
Mounted
4 Rod Storage Rack - 2 pieces
Rod holder - Side & Deck Mount
Rod Rack - Clip & Loop
6 Rod Storage Rack
SS Flush Mount Rod Holder
SS Rod Holder - Removable
Stainless Steel Vertical Rod Holder
SS Flush Mount Rod Holder
Rod Holder - Clamp-On
Stainless Steel 3 Rod holder Rack
Stainless Steel 4 Rod holder Rack
Rod Holder and Storage Racks
198
206. Cooler
Boxes & Fish
Bins
105L Cooler Box
70L Cooler Box
Fish Bins (70L, 50L or 30L)
Fish Bin Lids (70L, 50L or 30L)
MaXtek Cooler Chocks - Set of 4
207. Live Bait
Tanks
Live Bait Tank Kits - Transom
Mounted
Live Bait Tank Kits - Portable
208. Storage &
Accesories
Tackle Box Locker
1 Tray Tackle Box
2 Tray Tackle Box
BoatMates Hook Rack - 12 inch
BoatMates Cockpit Organizer
BoatMates Cruisin Caddy
210. Knives &
Accesories
Electric Knife Sharpener
Filleting / Boning Knife
Anglers Mate Fillet Knife
9 Piece Filleting Knife Set
Anglers Mate Bait Knife
Skipper Mate Knife
F i s h i n g - Bait Boards & Berley Canister
Bait Board with Rod Holder Mount 450 x 370mm
Our most popular Bait Board.
Comes complete with alloy mount. Fits into any standard deck rod
holder. The rod holder can be either vertical or angled as the board is
fully adjustable.
Keep all your hooks, bait and gear separate from the cutting area.
Features two separate compartments for storage.
• Easily removed and stored
• Fully adjustable
• Mount included
• Fits any standard deck mount rod holder
Board OA Dimensions: 450mm (w) x 370mm (d) x 90mm (h)
Part Number : 70200
Large Bait Board with Mount and Rod Holders
Large board complete with two additional rod holders Fits into any standard deck rod holder (requires two).
The mounts are adjustable horizontally to suit the spacing of your rod holders.
The rod holder style can be either vertical or angled as the board is fully adjustable.
Two additional quick release rod holders are available either side of the board.
• Mounts included
• Board plus two rod holders
• Fully adjustable mounting system
• Recessed compartments for storing knives, fishing tackle etc
• Two drink holders
• Drainage hole at rear
Dimensions: Board 675mm (w) x 445mm (d) x ~110mm (h)
Including Rod Holders: ~220mm (h)
Part Number : 70202
Bait Board with Rail Mount
High Sided Bait Board
Cutting area: 500mm x 275mm
Complete with gutter at rear and drain hole. 90mm rear up stand.
Overall size: 515mm x 358mm
Rod holder mount sold separately.
Part Number : 70201
Dimensions (mm):
600 (L) – 400 (W) – 100 (D) at rear
600 (L) – 400 (W) – 50 (D) at front
Part Number : BB12
199
F i s h i n g - Bait Boards
Large Bait Board
Deluxe Bait Board
Purchased with or without transom mounting kit or rod holder
mount.
Complete with drain hole and gutter around cutting surface.
Rod holder mount sold
separately.
Dimensions (mm): 850 (L) x
450 (W) x 50 (D)
Rod holder mount sold separately.
Dimensions (mm): 720 (L) x 440 (W) x 50 (D)
Part Number : BB08
Part Number : BB04
Small Plain Bait Board
Transom mounting kit or rod holder mount sold separately.
Dimensions (mm): 600 (L) x 400 (W) x 50 (D)
Part Number : BB01
Long Line Bait Board
Multi purpose board purchased with or without transom
mounting kit or and rod holder mount.
Rod holder mount sold separately.
Dimensions (mm): 630 (L) x 500 (W) x 70 (D)
Sprat Board
Part Number : BB10
Purchased with or without transom mounting kit or rod holder mount.
Rod holder mount sold separately.
Dimensions (mm): 460 (L) x 340 (W) x 50 (D)
Part Number : BB11
Part Numbers :
BB06 - Rod holder mounting kit
BB07 - Transom mounting kit
Suction Bait and Fillet Board
The original super suction Bait and Fillet Board is a must have for every fishing enthusiast.
Features:
Super Suction cups in each corner keep board secure while in use (included)
Molded-in ruler to verify your catch size
UV stabilized food grade polyethylene
Easily stows when not in use
Can be permanently mounted, hardware not included
Ideal for boat transoms, tiny bench seats and for general food preparation in galley
Replacement Super Suction 4-Pack available P/N: 2200
Mounting:
Insert suction cups into the board and turn until they have securely locked into locator.
Place board in desired location and press above the centre of the suction cup, until firmly in place.
DO NOT moisten suction cups!
Mount on clean dry surface such as fiberglass, smooth metal, glass etc.
Do NOT use on rough surfaces such as wood, scratched or rough fiberglass, vinyl or textured materials.
Part Number : 72560
200
F i s h i n g - Accessories
Adjust a Bite Berley Canister
• Only completely adjustable berley canister available on the market
• Control the flow of burley attracting fish not feeding the fish
• Will keep a constant unbroken burley trail flowing out from the
• back of your boat.
• Only burley canister designed to be sent down your anchor rope
• Can cover depth range from surface down to 100 + meters
• No more mess all over the back of the boat
• A versatile canister – anchor, drifting, down rigging and trailing
• Will hold a 1.5/1.8 and 3kg berley
• Can also be used for rock fishing
Part Number : AABBERLEY
NZ Anglers Mate Longline Kit
Kit contains:
2 x floats
2 x 5mm grapnel anchors
1 x 10” hand caster backbone with 2 x stainless steel shark clips
1 x 25 trace set with snap swivels
Includes handy storage basket
Part Number : NZAMLONGL
Gourmet Fish Smoker
• Heavy duty stainless steel construction
• Large 18.5ltr cooking area
• Bakelite heat resistant handle
• Two tier cooking racks
• Size is 460 x 340 x 180mm
Part Numbers : SMOKER
Gaff
Light Sticks (Cyallum)
1200mm alloy handle with stainless needle point hook
Yellow - Green coloured
For use on a fishing rod.
Comes with rod attachment Stickers
2 pieces per bag.
Part Number : GG1200
Part Numbers :
63458 - (4.5 x 29mm)
61902 - (3 x 25mm)
201
F i s h i n g - Rod Holders
Rod Holder - Wide Head
Rod Holder - Lalizas
ABS flush mount rod holder.
Mounts rod at 60º angle.
Head: 107mm x 85mm,
Length: 232mm or 250mm(54072-BK).
Internal Dia: 43mm
Height: 225mm
~ 60º angle
Part Numbers :
98678 - Black
98679 - White
Rod Holder - Narrow
Head
Made in Italy
Head: 85 x 57mm
Length: 257mm
Inside Dia: 40mm
Rod Holder - Wide Head with Cap
Head: 107mm x 85mm
Length: 232mm
ID: 42mm
Part Numbers :
4409B - Black,
4409W - White,
4409CB - Cap Only
Straight Rod Holder - Flush Mount
Length: 236mm
Outside Diameter: 84mm
Inside Diameter: 43mm
Part Numbers : 4414B -Black
4414W - White
MaXtek Rod Holder Black Rectangular
Top
Mounts rod at 60º angle.
Dimensions:
Top - 60mm x 87mm
Length ~ 235mm
Part Numbers :
54066-BK - Black
54066-WH- White
54066-BK-BP - (Black Blister Packed)
54066-WH-BP - (White Blister Packed)
Part Numbers :
4408W - White
4408B - Black
Straight Rod Holder - Side Mount
Rod Holder, PVC w SS Brackets
Length: 235mm
Outside Head Dia: 58mm
Inside Dia: 39mm
Ø45mm
230mm long
Part Numbers :
4412B - Black
4412W - White
202
Part Numbers :
54068 - White
54068B - Black
F i s h i n g - Rod Holders
Stainless Steel 3 Rod holder Rack
Rod Holder and Storage Racks
3 Rod holder and storage rack with a place to store your pliers
and fillet knives.
Has a handy place to store your pliers
and fillet knives
Made of white polypropylene that
resists chips, cracks and can be
cleaned up with soap and water
UV Stabilizers make these rod holders
durable
Made of Stainless Steel
Plastic Inserts to protect your fishing gear.
Dimensions:
343mm(L) x 235mm(H) x 75mm(D)
Part Number : 5408203
Part Numbers :
SW13403 - 3 Rod Holder and Storage
Rack
54083 - 4 Rod Holder and Storage
Rack (609mm x 305mm)
54084 - 6 Rod Holder and Storage
Rack (609mm x 305mm)
Stainless Steel 4 Rod holder Rack
Rod Holder, SS w/PVC End Cap
Stainless Steel 316
Liner extends in about 50mm
Dimensions:
45 x 528 x 198mm
Dimensions:
Internal Dia: 38mm
Length: 260mm
Width incl mounting feet: 90mm
Part Number : 54082-04
Part Number : 54068-SS
4 Rod Storage Rack - 2 pieces
Rod holder - Side & Deck Mount
UV Stabilised PE with
S.S. Mounting Hardware
Part Number :
54079-2BK
Part Number : 54034
Rod Rack - Clip & Loop
Used for rod storage on the boat or at home.
6 Rod Storage Rack
“Rack” is made up of
1 ring and 1 clip.
Black, 345mm long
For Horizontal or
Vertical Rod Storage
Part Numbers :
4413B - Black
4413W - White
Part Numbers :
Horizontal: 54065-H
Vertical: 54065-V
203
F i s h i n g - Rod Holders
SS Flush Mount Rod Holder
Stainless Steel Vertical Rod Holder
Our premium flush mount rod
holder is robustly manufactured
from 316 grade stainless steel
for corrosion resistance and
durability. The head of the holder
is cast in one piece.
Beautifully finished in polished
stainless and includes a PVC
liner and cap to keep water out.
The head is cast in one piece
and manufactured from 316
Marine grade stainless for
superior corrosion resistance.
* Polished 316 stainless
* Robust construction - Cast head
* Black PVC Liner
241 (l) x I.D. 42mm
30° mounting angle
Part Numbers :
4422 - with cap
4422BP (Blister Packed)
SS Flush Mount Rod Holder
Stainless steel flush mount rod holder.
Durable, economical and corrosion free. Mounts at a 30º angle.
Part Numbers :
4402 - with cap
4403 - without cap
Vertical Rod Holder with Black
PVC Liner
Part Numbers :
4420
4420-BP (Blister Packed)
SS Rod Holder - Removable
Made from stainless steel, this rod holder comes with a
slimline gunwhale bracket. Bracket allows the user to easily
remove the rod holder when not in use for convenient stowage.
Perfect for installing the rod holder in
areas of high traffic where removal
is prefferred. The rod holder slides
securely into the bracket.
Bracket base can be mounted on
either a vertical or horizontal surface
Base size: 100mm x 92mm
Part Number :
54073
54073-BP (Blister Packed)
Rod Holder - Clamp-On
Highly polished Stainless steel rod holder designed to easily clamp-on to a rail.
Clamps on to standard marine rails. Fits rail diameters
20mm - 25mm (3/4” to 1”)
Rod holder angle can be adjusted 180 degrees vertically to suit the best angle for your set up.
Easy to install with a twin bolt clamp
Dimensions:
230mm (L)
50mm (Dia)
Part Numbers :
54088 - Rod Holder - Clamp-On – Made of 304 Stainless Steel
54088-BP –Blister Packed Rod Holder - Clamp-On – Made of 304 Stainless Steel
54088-316 - Rod Holder - Clamp-On – Made of 316 Stainless Steel
204
F i s h i n g - Live Bait Aerators
Livewell Aerating Pumps
Keep your bait fish alive!
Pump is extremely EASY to install and remove for cleaning.
No tools needed. Just press the tab, twist the cartridge and pull it out!
• Ignition protected
• High efficiency, low amp draw
• Stainless steel shaft
• Water-cooled motor housing
• Completely sealed so it can be submerged without damage
12 Volt Motor - Standard 3/4” outlet fitting
Part Numbers :
NS350 - 350 GPH - Vertical
NS800 - 800 GPH - Vertical
NS800H - 800 GPH - Horizontal
TMC Bait Bubbler
A portable aeration system for use with livewell style live bait tanks.
Bait Bubbles is a watertight 3.0 volt air pump that will run for up to 100 hours on two (2)
alkaline “D” batteries. The case will float for a short time if accidently dropped in water
and is protected against splashing, wet hands and rain.
Unit is supplied with a stainless steel adjustable clip, 30” air
line tubing and weighted glass bead air stone.
TMC Bait Bubbler
Part Number : 00201
TMC Live bait Aerator Pump Kit
This aerator has suction cups for fitting to bottom of tank, and is excellent for keeping
your bait alive in any cooler, bait bucket or live well with a non-porous surface.
12 Volt, 250 GPH submersible pump with adjustable flow control.
Supplied with battery clips on 1.2m cables.
Dimensions:
spout tube: 300mm high , width overall: 130mm
pump only: 120mm high (including the suction feet) x 80mm diameter.
Part Number : 02305
205
F i s h i n g - Fish Bins & Coolers Boxes
105L Cooler Box
* Heavy duty plastic ice box with stainless clips
* Keep your fish and drinks cool this summer
* Use it as an extra seat on the boat
* Designed to store ice for up to 5 days
* Features a foam seal on the lid, sturdy lifting handles, large bore drain
and non-skid pads on the base
* Capacity: 105 litres
Dimensions: 490mm (h) x 910mm (w) x 470mm (d)
Part Number : 2001
70L Cooler Box
* Heavy duty plastic ice box with stainless clips
* Keep your fish and drinks cool this summer
* Use it as an extra seat on the boat
* Designed to store ice for up to 5 days
* Features a foam seal on the lid, sturdy lifting handles, large bore drain and nonskid pads on the base
* Capacity: 70 litres
Dimensions: 400mm (h) x 800mm (w) x 450mm (d)
Part Number : 2000
Fish Bins (70L, 50L or 30L)
Fish Bins in 3 different sizes to suite every application.
Please note that this is just the Base and does not come with
the Lid.
Specifications:
30L Fish Bin: 510mm L x 385mm W x 235mm H
50L Fish Bin: 625mm L x 440mm W x 265mm H
70L Fish Bin: 670mm L x 450mm W x 330mm H
Part Numbers :
532.02 - 30L Fish Bin
555.02 - 55L Fish Bin
575.02 - 70L Fish Bin
Fish Bin Lids (70L, 50L or 30L)
MaXtek Cooler Chocks - Set of 4
Fish Bin lids in 3 different sizes to match our Fish Bins.
Please note that this is just the Lid and does not come with the Base.
Plastic Cooler Chocks that can be fixed to your boat to stop
your Cooler or Ice Box moving around.
Specifications
30L Fish Bin Lid: 515mm L x 395mm W x 25mm H
50L Fish Bin Lid: 625mm L x 440mm W x 30mm H
70L Fish Bin Lid: 670mm L x 450mm W x 35mm H
Comes as a set of 4
and includes straps.
Part Numbers :
531.02 - 30L Fish Bin Lid
554.02 - 55L Fish Bin Lid
574.02 - 70L Fish Bin Lid
206
Part Numbers :
70207
70207-BP (Blister
Packed)
F i s h i n g - Live Bait Tanks & Tackle Boxes
Live Bait Tank Kits - Transom Mounted
The ideal live bait tank set up, allowing maximum longevity of your live bait.
Transom mounted bracket to be installed below water level on back of transom.
Pump simply clips onto bracket and use supplied hose to attached to tank.
Ideally situated on the duck board where 5 holes are drilled into the tank for
continous flow of water.
Dimensions:
550mm (W)x 380mm (L)x 300m (H) - 55L Live Bait Tank
450mm (W)x 380mm (L)x 300m (H) - 45L Live Bait Tank
Part Numbers :
BT03TKIT - 55L Live Bait Tank Kit (Includes Hatch, Pump, Hose and Clamps)
BT02TKIT - 45L Live Bait Tank Kit (Includes Hatch, Pump, Hose and Clamps)
BT03T - 55L Live Bait Tank (Tank and Hatch only)
BT02T - 45L Live Bait Tank (Tank and Hatch only)
Live Bait Tank Kits - Portable
The aerator pump simply is enclosed in the tank to keep the live bait alive
and fresh. Large handles allow for portable handling.
This tank does not have mounting feet for transom mounting.
Dimensions:
550mm (W)x 380mm (L)x 300m (H) - 55L Live Bait Tank
450mm (W)x 380mm (L)x 300m (H) - 45L Live Bait Tank
Part Numbers :
BT03PKIT - 55L Live Bait Tank Kit (Includes Hatch and Aerator Pump)
BT02PKIT - 45L Live Bait Tank Kit (Includes Hatch and Aerator Pump)
BT03P - 55L Live Bait Tank (Tank and Hatch only)
BT02P - 45L Live Bait Tank (Tank and Hatch only)
Tackle Box Locker
Keep your tackle organised in this convenient locker. Ideal installation in
the transom and stern. Add value to your boat with this great addition and
enjoy the convenient access of your tackle neatly stowed. Storage Locker
complete with seven handy storage compartments. This model is installed
as standard equipment by many of New Zealand’s leading boat builders.
* Storage locker
* 7 - compartment tackle box
* Recessed modern design
* Colours: White & Grey
* Made in Europe by Plastimo
Spare Parts: Storage compartments available
Part Numbers :
4504 - White
4503 - Grey
207
F i s h i n g - Tackle Boxes & Storage
1 Tray Tackle Box
* Removable organiser tray
* Contoured heavy duty carry handle
* Non rusting hinges and closing tab
* Extra strong polypropylene
construction
* 25cm fish rule on top of lid
Box Dimensions: 290 x 130 x 115mm
Part Number : TB1
2 Tray Tackle Box
* 2 cantilever trays for easy storage
* Contoured heavy duty carry handle
* Non rusting hinges and closing tab
* Extra strong polypropylene
construction
* 25cm fish rule on top of lid
Box Dimensions: 325 x 175 x 155mm
Part Number : TB2
BoatMates Hook Rack - 12 inch
Three large super suction cups keep this handy hook rack in place,
even in the roughest conditions.
Each rack holds up to 25 baits, plus a place for your fillet knife.
Charter Captain tested on the Great Lakes.
Easily stows away when not in use.
Use several to organize baits for different species, or water and
structure variations.
Part Number : 2110-1
208
F i s h i n g - Storage & Accessories
BoatMates Cockpit Organizer
This easy to mount organizer holds your fishing gear, binoculars or
personal items.
Keeps baits, pliers, fillet knife safe and organized.
Mounts on a flat surface.
Great for small boats with limited cockpit storage.
With a new all-resin design, the cockpit organizer won’t rust or
corrode.
Its injection moulded, commercial grade resin provides superior
durability and an attractive appearance.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2133-1
BoatMates Cruisin Caddy
This easy to mount organizer holds your favorite beverage,
personal items and even a couple of your favorite lures.
Mounts on a flat surface.
Great for small boats with limited cockpit storage.
With a new all-resin design, the cruisin caddy won’t rust or
corrode.
Its injection moulded, commercial grade resin provides superior
durability and an attractive appearance.
The holder can be mounted with Tempress’ Super-Suction cups or
screw mounted.
Part Number : 2131-1
Electric Knife Sharpener
This Electric Knife Sharpener is a great simple, quick and effective way to sharpen your fillet knives, kitchen knives, any knives really.
There is no skill needed to do this as its electric, it does it all for you. This handy gadget is the perfect way to get more use out of dull
knives, by using a two-stage sharpening system that gives you professional
results. A blunt knife is a dangerous knife and can slip easily when filleting
fish or preparing food, whereas a sharp knife slices through fish/meat and
vegetables with very little pressure making it easier to control the blade and
can make food preparation quick and enjoyable.
Specifications:
Voltage: 220-230 volt AC (household plug)
Sharpening Angle: 15°
Part Number : WFT-28D
209
F i s h i n g - Knives
Filleting / Boning Knife
Anglers Mate Fillet Knife
This is the perfect sized fillet knife.
Soft grip rubber for better control and easy
on the hands
* 143mm blade
* Marine grade 316 Stainless
Anglers stainless steel filliting knife and
sheath.
Length of blade: 210mm
Part Number : 5189
Part Number : 70195
Anglers Mate Bait Knife
9 Piece Filleting Knife Set
Bait Knife with Rubber Grip Handle and
Sheath.
215mm overall length of blade and
handle.
Kit Includes:
Part Number : 206B
*Carry case
*Small Fillet Knife with 15cm Stainless Steel Blade
*Large Fillet Knife with 20cm Stainless Steel Blade
*Combination Stainless Knife and Fish Scaler
*Sharpening steel
*Scale with compass and Tape Measure
*Stainless Steel Utility Scissors
*Sure Grip Fillet Glove
*34cm x 25cm Fillet Board
Part Number : WL-1004
Skipper Mate Knife
Stainless Steel Multifunction Tool
Features include: Knife , Bottle opener , Marlin Spike , Shackle Key ,
Ruler and Key Ring.
Part Number: 11476
210
Fittings & Vents
213. Vents
217. Deck Fillers
221. Hinges
226. Ladders
Streamline Dorade Box Vent
Rectangular Vent with
Dorade Box
70mm Low Profile PVC Vent
70mm High Profile PVC Vent
Solar Powered Vent
Solar Powered Vent with Stainless
Steel Cover
Plastic Ventilator
Mushroom Type Vent
100mm Low Profile PVC Vent
100mm High Profile PVC Vent
Square Vent 118mm X 118mm
Pipe Connector for Square Vent
Divisible Rectangular Ventilator
Louver Vent 267mm X 89mm
Rectangular Vent 206 X 106mm
ABS Louver Vent 260mm x 125mm
ABS Louver Vent 140mm x 125mm
Louver Vent 127mm X 112mm
Louver Vent 228mm X 127mm
8 Louver Vent - Stainless Steel
6 Louver Vent - Stainless Steel
Round 5” SS Louvre Vent
Midget Ventilators
Clam Shell Vent
10 Louver Vent - Stainless Steel
4 Louver Vent - Stainless Steel
3 Louver Vent - Stainless Steel
Scoop Vent
Clam Shell Vent Large
Chrome Deck Fillers
Deck Filler - Stainless Steel
MaXtek Deck Filler SS 1.5” with
Key
MaXtek Deck Filler SS 2”with Key
MaXtek Nylon Deck Filler
Fuel Filler - Plastic with Cover
Fuel Filler - Plastic with Lip
Fuel Filler - Plastic
Hinge 63mm x 40mm
Hinge 100mm x 40mm
Hinge 135mm x 40mm
Hinge SS - 100mm x 40mm
Hinge SS - 62mm x 37mm
Hinge 80mm x 60mm
Hinge 100mm x 60mm
Hinge 70mm x 40mm
Hinge 90mm x 40mm
Hinge 108mm X 40mm
2 Step SS Telescopic Ladder
Ladder - 2 + 1 Step
Ladder - 3 Rung vertical
3 Step SS Under Transom Ladder
3 Step SS Telescopic Ladder
4 Step SS Telescopic Ladder
Ladder 5 Step Folding w Handrail
Teak Boarding Platform & Ladder
216. Fuel Tank
Vents
Straight Vent - Chrome
90 Degree Down Vent - Chrome
Straight Vent - Nylon
Straight Vent - Nylon - Oval
Straight Vent - Chrome
90 Degree Up Vent - Chrome
90 Degree Vent - Nylon - Round
Straight Vent - Nylon - Round
90 Degree Vent - Nylon - Oval
212
218. Bungs
Oval Bung ¾” Chrome
Stainless Steel Drain Plug
MaXtek Large Bung with Cut Off
Base
MaXtek Automatic Drain Plug
Expanding Bung - Snap (lever)
Expanding Bung - Twist Type
Small Bung - Plastic
Large Bung - Plastic
Expanding Bung - Twist Type
Wood Drain Plugs
219. Bollards,
Cleats , Fairleads
etc...
Bollard - Polished Bronze
Premium Retractable Cleat (6”)
Cleat - Retractable
Cleats - Chrome on Brass
Cleats - Nylon
Bollards - Stainless Steel
Cleats - 316SS (Flat Bar)
Cleats - 316SS (Round Bar)
Cleats - Polished Bronze
Rowlocks Plate
Fairlead 115mm (pair) - 316SS
Fairlead 150mm (pair) - 316SS
Stanchion Base
Transom Mount Ski Tow Hook
Nylon Fairleads for 10-13mm Rope
Nylon Fairleads for 14-18mm Rope
Collared U-Bolt
Stainless Steel U Bolt
Hawse Pipe
222. Catches ,
Latches , Clips
Barrel Bolt - Plastic
Door Clips
Barrel Bolt - Chrome
Brass Door Hook
Hatch Fastener 316 Stainless Steel
Door Fastener - Chromed Brass
Anti-Rattle Door Keeper
Door Stop & Catcher
Stainless Hatch Cover Pull-Up
Marine Padlock “SeaLock”
Brass Coat Hook
Plastic Tube Clips
Hawse Pipe
SS Lift Handle
Flush Latch SS316 - 2 Finger
MaXtek Flush Lifting Handle
Lifting Ring 80mm x 19mm
Flush Ring Pull Latch
2” Flush Latch 316SS
Heavy Duty Latch
Snap Shackle - Pelican Hook
Pelican Hook, Eye End – 6.4mm
S/S
Stainless Steel Hatch Stay
200-370mm Stainless Steel Hatch
Stay
330-600mm
Chart Table Retainer Spring
227. Rails & Steps
Hand Rails - Stainless Steel
Hand Rails - Full Stainless Steel
Hand Rails - SS with Black End
Chromed Brass Grab Handle
Stainless Steel Rail & Teak
Footrest
Hand Rails - SS with Wave Grip
Hand Rail - Teak
Hand Rail - Plastic
Step for Mast
Rail Mount Bracket
Mast Step - Folding Step
Stainless Marine Rigging Screws
F i t t i n g s - Vents
Streamline Dorade Box Vent
Solar Powered Vent
Dorade vent has a
shut-off system to
stop water from rain
and waves.
Ø 85 mm sleeve,
White flange.
Motorised Fan with Large Solar Panel, Rechargeable Battery
and Switch allows for 24 Hour Ventilation
Dimensions:
263 (L) x 150 (W) x 85mm (H)
Part Number : 51637
Rectangular
Vent with
Dorade Box
Dimensions:
420mm x 120mm
Part Number : 4381
70mm Low Profile PVC Vent
Part Number : 13593
OD: 216mm
Height above deck:
40mm
Part Numbers :
13028 - White Finish
13027 - (Stainless Steel
Finish)
Solar Powered Vent with Stainless Steel
Cover
Stainless Steel Motorised
Fan with Large Solar Panel,
Rechargeable Battery and
Switch allows for 24 Hour
Ventilation
OD: 216mm
Height above deck: 31mm
Part Numbers :
13025
13025-BP (Blister Packed)
Plastic Ventilator
194mm x 149mm x 127mm
100mm Low Profile PVC Vent
Part Number : 13590
Part Number : 13594
100mm High
Profile PVC Vent
Mushroom Type
Vent
Part Number : 13504
Part Number : 13596
213
F i t t i n g s - Vents
Square Vent 118mm X 118mm
There is also a Pipe Connector
available for this vent.
Rectangular Vent 206 X 106mm
Part Number : 4384
Part Numbers :
4382
4382-BP (Blister Packed)
Pipe Connector for Square Vent
To suit 70mm and 65mm pipe
Part Number : 4383
ABS Louver Vent 260mm x 125mm
Made of UV Stablised
ABS Plastic
Part Numbers :
13574-BK (Black)
13574-WH (White)
134574-BK-BP (Black Blister Packed)
Divisible Rectangular Ventilator
This vent can be cut into 2 smaller Vents.
Black or White coloured , 255mm X 115mm
Part Numbers : 4380B (black) or 4380W (white)
ABS Louver Vent 140mm x 125mm
Made of UV Stablised
Black ABS Plastic
Part Numbers :
13575-BK
Louver Vent 127mm X 112mm
Stainless Steel thickness 0.8mm
Louver Vent 267mm X 89mm
Stainless Steel
Part Number :
99063
Part Number :
13570
Louver Vent 228mm X 127mm
Stainless Steel
Part Numbers :
13572
13572-BP (Blister Packed)
214
F i t t i n g s - Vents
3 Louver Vent - Stainless Steel
4 Louver Vent - Stainless Steel
205mm X 108mm
X 25mm
205mm X 112mm
X 27mm
Part Number : 13583
Part Number :
13584
6 Louver Vent - Stainless Steel
8 Louver Vent - Stainless Steel
325mm X 112mm
X 27mm
Dimensions: 430mm X 75mm X 27mm
Part Number :
13586
Part Number :
13580
Round 5” SS Louvre Vent
Marine grade
Stainless Steel
Round 5” Dia
Part Number :
13505
10 Louver Vent - Stainless Steel
525mm X
112mm X 27mm
Part Number : 13582
Midget Ventilators
Stainless Steel
Part Numbers :
4106 - Small: 1-1/2” x 1-5/8”
4107 - Large: 2-1/8” x 2-1/8”
Clam Shell Vent
Stainless Steel
5-1/8” x 4-1/2” x 2-1/8”
Part Number : 4111
Scoop Vent
98mm X 80mm X 30mm
Part Number : 4112
Clam Shell Vent
Large
Stainless Steel
7-5/8” x 6-7/8” x 2-3/4”
Part Number : 13528-L
215
F i t t i n g s - Fuel Tank Vents
90 Degree Down Vent - Chrome
Straight Vent - Chrome
Max Hull Thickness:
1-1/8” (28mm)
Chrome Plated Brass
To suit 5/8” I.D. hose
Max Hull Thickness:
1” (25mm)
Chrome Plated Brass
To suit 5/8” I.D. hose
Part Number : 2139
Part Numbers :
2136
2136-BP (Blister Packed)
Straight Vent - Nylon
90 Degree Up Vent - Chrome
Max Hull Thickness:
1” (25mm)
Hole req - 30mm
Max Hull Thickness: 1/2” (12.5mm
Chrome Plated Brass
To suit 5/8” I.D. hose
Dimensions:
75 (L) x 48mm (W)
Part Number : 2140
Connection:
Pipe fitting 16mm
Made in Italy
Part Numbers :
2141W - White
2141B - Black
Straight Vent - Nylon - Oval
Straight Vent - Nylon - Round
Round End (41mm dia)
Max Hull Thickness:
1-1/2” (38mm)
Made in Italy
Part Number : 2144
Oval End (60 x 40mm)
Max Hull Thickness: 1-1/2”
(38mm)
Made in Italy
Part Number : 2146
90 Degree Vent - Nylon - Oval
Oval End (60 x 40mm)
Max Hull Thickness: 1-1/2”
(38mm)
Made in Italy
Part Number : 2147
216
F i t t i n g s - Deck Fillers
MaXtek Deck Filler SS 1.5 inch with
Key
MaXtek Deck Filler SS 2 inch with
Key
Stainless Steel with Key
1.5” Tube
Diesel, Petrol or Water
Stainless Steel with Key
2” Tube
Diesel, Petrol or Water
Part Numbers :
4001D - Diesel
4001P - Petrol
4001W - Water
Part Numbers :
4003D - Diesel
4003P - Petrol
4003W - Water
4001D-BP - (Diesel Blister)
4001W-BP - (Water Blister)
Chrome Deck Fillers
Made in New Zealand using
chrome on bronze.
Requires a 40mm hose tail
which screws inside the filler
(sold separately).
The diameter of the top is
100mm.
Part Numbers :
3988 - Fuel
3989 - Water
3993 - Cap Only
MaXtek Nylon Deck
Filler
These can be labelled; Fuel, Gas,
Diesel, Petrol, Water or Waste
(labels supplied).
The lid screws on and is sealed
with an O-Ring.
Part Numbers :
40017 (1.5” tube)
40017-BP (1.5” tube Blister Packed)
40018 (2” tube)
Deck Filler - Stainless Steel
1.5” tube
Water only
Part Number :
4005W - Water
217
F i t t i n g s - Bungs
Oval Bung ¾” Chrome
MaXtek Automatic Drain Plug
47mm x 32mm External
Dimensions
Fits all standard 1” diameter drains on
transoms up to 2-1/4” thick
Ø24mm Hole with 19mm
Internal Thread
Automatically drains water when boat
is under way and provides a water
tight seal when the boat slows or
stops.
Part Numbers :
3990 - Complete
3992 - Plug Only
Stainless Steel
Drain Plug
50mm x 38mm
Part Number : 80097
MaXtek Large Bung with Cut Off
Base
Large MaXtek Bung - 1 1/4”
threads (32mm X 3.5mm pitch
thread)
Cut off base allows for low
mounting on your hull.
Also comes complete with rubber
O-ring seal and coarse thread bung.
Blister Packed
Size: 170mm x 50mm
Part Number : 4110
Small Bung - Plastic
Mounting hole of 25mm
Plug inside diameter 19mm
Sold Complete or Plug Only
Part Numbers :
4104 (Complete in White)
4105 (Complete in Black)
4109 (Plug Only in Black)
Large Bung - Plastic
Mounting hole: 41mm
Nylon Nitrile O ring for a positive seal.
Quick turn coarse thread.
Four screw fixing.
Ideal also for draining tanks.
Part Number : 4100
Part Number : 4102
Expanding Bung
- Snap (lever)
Expanding Bung - Twist Type
Snap plug.
Simply snaps in the drain
tube for a secure fit.
Made of brass.
Suits a 25mm hole.
Tightens in place with a
clockwise rotation of the
handle.
Suits a 23mm hole.
Part Number : 10261
Part Number : 4103
Expanding Bung - Twist Type
Tightens in place with a
clockwise rotation of the “T”
handle.
Made of brass.
Suits a 25mm hole.
Part Number : 40096A
218
Wood Drain Plugs
Sized from 5 to 45mm
set of 10pcs
Part Number : 90593
D e c k F i t t i n g s - Bollards, Cleats , Fairleads etc...
6” Bollard - Polished Bronze
Bollards - Stainless Steel
6” high
Bolt size: 5/16 inch - 8mm
150mm or 200mm long
Part Number : 56502-02 (6”)
Part Numbers :
87213-150 - 150mm long
87213-200 - 200mm long
Premium Retractable Cleat (6”)
*Drainage facility to attach hose pipe in order to divert water
that may enter cleat. ¾” (20mm) Hose can be connected to
each mounting fitting for drainage
*Anti rattle, holds firm in up or down position.
*Cleat sits snugly within frame when fully retracted
*Simple and fast two hole installation
*Made from polished 316 Stainless Steel
Dimensions:
Height above deck:
42mm above deck line when fully raised
14mm above deck line when retracted
Depth below deck:
64mm (without drainage
componentry attached)
OA length: 150mm
Width: 38mm
Cleats - 316SS (Flat Bar)
316 Stainless Steel
Part Numbers :
4 inch: 80041-4
5 inch: 80041-5
6 inch: 80041-6
Cleats - 316SS (Round Bar)
Highly Polished 316 Stainless Steel
Cleats will stay looking good through
the harsh marine environment.
Part Numbers :
4”: 80036-4
5”: 80036-5
6”: 80036-6
Part Number : 88300
Cleats - Polished Bronze
Cleat - Retractable
Polished 316 Stainless Steel
Cleat sits snugly within frame
when fully retracted
Part Numbers :
88232-125 - 125mm long
88232-150 - 150mm long
88232-200 - 200mm long
2.5” (63mm) long
Part Number : 56518-01
Cleats - Nylon
Durable high impact black nylon
Made in New Zealand
Part Numbers :
3972N - 60mm 3975N - 145mm
3973N - 80mm
3977N - 180mm
3974N - 110mm
3979N - 220mm
3974N-BP - 110mm (Blister Packed)
3975N-BP - 150mm (Blister Packed)
3977N-BP - 200mm (Blister Packed)
Open Style Cleats
Chrome on Brass
Rowlocks Plate
Cleats - Chrome on Brass
Part Numbers &
Measurements :
3985 - 127mm (L) x 30mm (H) - Ø6mm bolts
3984 - 155mm (L) x 32mm (H) - Ø8mm bolts
3983 - 205mm (L)x 34mm (H) - Ø9.5mm bolts
3982 - 254mm (L) x 44.5mm (H) - Ø12.7mm bolts
Chrome/Brass
Sold as a pair
Part Number : 5824
219
D e c k F i t t i n g s - Bollards, Cleats , Fairleads etc...
Fairlead 115mm (pair) - 316SS
Rope Clam Cleats
115mm long
4-1/2” Bow Choke
Sold in pairs
Sold individually
Part Numbers :
80015
80015-BP (Blister Packed)
Fairlead 150mm (pair) - 316SS
150mm long
6” Bow Choke
Sold in Pairs
Part Number : 80016
Stanchion Base
Marine Grade Stainless Steel
To suit 1” tube.
Dimensions:
90mm x 65mm x 53mm(h)
Part Numbers :
3968 (Black 4-8mm rope)
3969 (White 4-8mm rope)
3970 (Black 6-12mm rope)
3971 (White 6-12mm rope)
3968-BP (Black Blister Packed 4-8mm rope)
3969-BP (White Blister Packed 4-8mm rope)
3970-BP (Black Blister Packed 6-12mm rope)
3971-BP (White Blister Packed 6-12mm rope)
Nylon Fairleads for 10-13mm Rope
Sold individually
Part Numbers :
3922 (10mm rope)
3923 (13mm rope)
Nylon Fairleads for 14-18mm Rope
Sold in pairs.
Part Numbers:
3920 (14mm rope) 3921
(18mm rope)
Part Number : 54054-02
Stainless Steel Stanchion
600mm long and 1”/25mm tube at base end.
Tubed holes for running life lines in top and
middle.
2 holes near bottom of pole for screwing or
bolting onto mounting base.
Collared U-Bolt
Stainless Steel
5/16” Diameter.
80mm Max Fitting Depth
Made in New Zealand
Part Number : 54001
Part Number : 3986
Transom Mount Ski Tow Hook
Stainless Steel U Bolt
Marine Grade
Stainless Steel
Dia: 10mm (3/8”), 115mm long,
25mm Inside Eye
2½” Ring Diameter
2” long thread leg
Part Number : 53554
Part Number :
53590-02
220
F i t t i n g s - Hinges
Hinge 63mm x 40mm
Nylon Hinge
Stainless Steel Pin
Part Number : 0202
Hinge 80mm x 60mm
Nylon Hinge
Stainless Steel Pin
Part Number : 0203
Hinge 100mm x 40mm
Nylon Hinge
Stainless Steel Pin
Part Number : 0205
Hinge 100mm x 60mm
Nylon Hinge
Stainless Steel Pin
Part Number : 0204
Hinge 135mm x 40mm
Nylon Hinge
Stainless Steel Pin
Part Number : 0206
Hinge 70mm x 40mm
Nylon Hinge
Stainless Steel Pin
Hinge 95mm x 35mm
Part Number : 0207
Nylon Hinge
Stainless Steel Pin
Part Numbers :
90379 - Black
90380 -White
Hinge 90mm x 40mm
Hinge SS - 100mm x 40mm
Nylon Hinge
Stainless Steel Pin
Stainless Steel Hinge and Pin
Part Number : 0208
Part Number : 52583
Hinge 108mm X 40mm
Hinge SS - 62mm x 37mm
Nylon Hinge
Stainless Steel Pin
Stainless Steel Hinge and Pin
Part Number : 0209
Part Number : 52548
221
F i t t i n g s - Catches , Latches , Clips
Barrel Bolt - Plastic
Door Clips
Made in Italy
Black or White Coloured
For Cupboards.
37mm (L:) x 26mm (D)
Black or White
86mm(L) x 13mm(H)
x 29mm(W)
Part Numbers :
0296B (Black)
0296W (White)
Part Numbers :
0295B (Black)
0295W (White)
Barrel Bolt - Chrome
Brass Door Hook
4 inch long
Polished Brass
Part Number : 50002-CP
Part Numbers :
50020-01 - (2-1/4” Long)
50020-02 - (2-3/4” Long)
Hatch Fastener 316 Stainless Steel
Door Fastener - Chromed Brass
Length can be adjusted via threaded stem:
79mm to 95mm
26mm wide
Security eye for padlock
in base.
Dimensions: 130 x 35mm
Part Number : 50051-CP
Part Number : 70611
Anti-Rattle Door Keeper
Door Stop & Catcher
316 Stainless Steel
Stainless Steel 316
Part Numbers :
85021
85021-BP (Blister Packed)
Designed to be self latching and hold the door in place.
222
Part Number : 85019
F i t t i n g s - Catches , Clips , Locks
Stainless Hatch Cover Pull-Up
Marine Padlock “SeaLock”
Stainless Steel Hatch or Floorboard lifter
*Chrome plated brass body
*Stainless steel shackle and springs for maximum resistance to
corrosion from sea water and sun
*Automatic return of the key to extraction position
*Key withdrawal with open or closed shackle Marine Padlocks
“SeaLock”
*Stainless Steel Hatch Pull
*Measures 32mm in Diameter & 54mm Long
*Tidy solution for lifting and closing Hatches, Floor Boards,
*Storage & Baitwell Lids
Easy to install - just drill a 6mm hole in your hatch
Suitable for hatch thickness from about 15mm up to about
32mm
Part Numbers :
11140 - 30mm
11141 - 40mm
11143 - Set of 3, 30mm marine padlocks with joint keys.
Part Number : 51004
Brass Coat Hook
Part Numbers :
91677 - 67mm x 38mm
91678 - 76mm x 51mm
Plastic Tube Clips
Quality Tube Clips
15mm to 45mm
Measurement is the tube diameter.
Part Numbers :
4120 - 15mm
4121 - 20mm 4122 - 25mm 4123 - 30mm 4120-BP (15mm Blister Packed)
4122 -BP (25mm Blister Packed)
4124 - 35mm
4127 - 40mm
4128 - 45mm
4123-BP (32mm Blister Packed)
4124-BP (38mm Blister Packed)
Hawse Pipe
Stainless Steel 316
165mm x 84mm
Part Number : 80002
223
F i t t i n g s - Catches , Latches , Clips
SS Lift Handle
Flush Latch SS316 - 2 Finger
Marine Grade Stainless Steel
50mm (Dia.)
Hatch or door latch.
Complete with strike plate
Part Numbers :
51006
51006-BP (Blister Packed)
Has a recessed lift ring which is easily lifted and releases the
latch
Polished 316 stainless steel
Hole Diameter 50mm (2”)
Part Number : 80284
MaXtek Flush Lifting Handle
Lifting Ring 80mm x 19mm
Flush fit lifting handle. Ideal for large access hatches and floor
boards.
material: chrome plated brass
Dimensions:
76mm (l) x 52mm(w)
Chrome Plated Zinc.
Used for opening hatches.
Part Number : 51033
Part Numbers :
51007
51007-BP (Blister Packed)
Flush Ring Pull Latch
2” Flush Latch 316SS
Available in White or Black
Ø60mm
Hatch or door latch.
Complete with strike plate.
Recessed lift ring to easily lift and release the latch.
Part Numbers :
43001-BK (Black)
43001-WH (White)
Polished 316 stainless steel
Hole Diameter: 50mm (2”)
Overall Diameter: 60mm
Part Numbers :
80264 - (no lock)
80265 - (with lock)
224
F i t t i n g s - Catches , Clips , Stays
Heavy Duty Latch
Stainless Steel 316
Stainless Steel Hatch Stay
200-370mm
Deck Plate Dimensions: 76 x 62mm
This stay is suitable for securing hatches partially or fully open.
Part Number : 80269
Marine grade construction. Sliding frame is all stainless steel with
stainless mounting frame.
Stainless bar slides within a frame and is clamped tight in any
position with plastic knobbed bolt.
A stop prevents arm from coming apart in the event that the hatch
is fully opened.
*Adjusts from 200 to 370mm
Part Number : 62500-02
Snap Shackle - Pelican Hook
The plunger pin is set captive into the hook during
assembly and cannot
become detached.
Clip Hook - 12mm
316 Stainless Steel
Part Number :
85006-01
Stainless Steel Hatch Stay
330-600mm
This stay is suitable for securing hatches partially or fully open.
Marine grade construction. Sliding tube is all stainless steel with
brass plated mounting fittings.
Stainless rod slides inside a stainless tube and is clamped tight in
any position with plastic knobbed bolt. Two fixing holes on each
end.
*Adjusts from 330 to 600mm
*Inner rod diameter 9.5mm
*Outer tube diameter 12.0mm
Part Number : 62507
Pelican Hook, Eye End – 6.4mm S/S
The sliding sleeve offers wide opening, and quick release and
tensioning. 6.4mm (1/4”) diameter hole.
Made of Stainless steel
Breaking load 450kg
Overall length: 170mm
Overall Extended length: 195mm
6.4mm Hole
Part Number : 85010
Chart Table Retainer Spring
When the spring is fully
extended it will stay locked in place ensuring your chart table is
securely held upright.
Stainless Steel
tight wound spring
Overall length adjustable 236mm
- 276mm
Part Number : 62509
225
F i t t i n g s - Ladders
2 Step SS Telescopic Ladder
3 Step SS Telescopic Ladder
316 Stainless Steel
Width incl mounts - 286mm
Folded Length - 336mm
Extended Length - 555mm
316 Stainless Steel
Width incl mounts - 292mm
Folded Length - 370mm
Extended Length - 865mm
Part Number : 13002
Part Number : 13003
Ladder - 2 + 1 Step
4 Step SS Telescopic Ladder
Stainless Steel
Marine grade Stainless Steel
OA Width of ladder - 236mm
Folded Length - 315mm
Extended Length - 540mm
Width incl mounts: 318mm
Retracted Length: 400mm
Extended Length: 1145mm
Part Number : 71064-01
Part Number :71060-04
3 Step SS Under Transom Ladder
Teak Boarding Platform & Ladder
Stainless Steel
Designed to be mounted under the transom
Folded Length 300mm
Extended - 890mm
Step width - 222mm
Below transom - 65mm
* Natural teak timber platform
* 316 marine grade stainless steel
parts and ladder
Part Number : 71070-03
Dimensions:
Teak Platform
450mm (w) x 390mm (l)
Ladder Length - 780
Internal step width - 200mm
Part Number : 11008
226
F i t t i n g s - Rails & Steps
Hand Rails - Full Stainless Steel
Hand Rails - SS 25mm Oval Tube
22mm Tube Diameter
Polished stainless steel.
Attractive streamlined look. Made of 25mm oval section tube.
6mm threaded hole at each end.
Part Numbers :
3935 (20cm)
3936 (30cm)
3937 (40cm)
3938 (60cm)
Part Numbers :
HA330 - 305mm
HA346 - 460mm
Hand Rail - Teak
3 sizes available , 60mm high
Hand Rails - SS with Black End
Ideal for mounting on aluminium boats as the s/steel tube does
not come into contact with the mounting surface.
Fasten with eight 6mm (1/4”) countersunk screws.
22mm Tube Diameter.
Can be easily shortened if desired.
Part Numbers :
HA241 - 410mm
HA261 - 610mm
HA281 - 810mm
Chromed Brass Grab Handle
Dimensions(OA): 140mm (L) x
42mm (W) x 40mm (H)
Part Numbers :
143752
143752-BP (Blister Packed)
Stainless Steel Rail & Teak Footrest
Dimensions:
270 x 130mm
Part Number : 3940
Part Numbers : 93383 - 580mm 93382 - 330mm
93384 - 840mm
Hand Rail - Plastic
570mm two looped hand rail
Manufactured from tough UV resistant polypropylene
construction.
Part Number : 3939
Step for Mast
Stainless Steel
16mm teak instep
286mm x 130mm
Part Number : 54035
Rail Mount Bracket
Plastic with Stainless Steel Screws & Inner Ring for 1” &
7/8” Tube
Part Number : 60162
227
F i t t i n g s - Steps & Rigging Fittings
Mast Step - Folding Step
A strong chrome plated folding step with diamond serrated tread. Stainless steel tension spring for
positive location. When the step is not in use it is easily folded vertically so it is clear and out of the
way.
Ideal step to improving boarding a boat from different heights or climbing mast.
* Step folds easily out of the way
* Chromed Plated Brass construction
* 50 x 82mm Step Size
* Robust mechanical hinge
* Corrosion resistant materials
Part Number : 54049
Stainless Marine Rigging Screws
Fork-Swage connectors
Adjustment is achieved by rotating the main coupling. 6mm centre hole is provided for inserting adjustment tool for 12mm rigging
screw and 4mm for the 10mm and 8mm rigging screws.
The clean lines and design in the Rigging Screw makes it less prone to
tearing sails or clothing and ideally suited for marine or architectural
features.
316 marine grade stainless steel
Stainless Marine Rigging Screw - 12mm
Dimensions:
Overall length when closed {Pin to Pin - 260mm
Overall length when fully open {Pin to pin - 400mm
Thread diameter - 12mm
Pin diameter - 12mm
Jaw width ID - 16mm
Jaw width oa - 23mm
Part Number : 80080-05
Stainless Marine Rigging Screw - 10mm
Dimensions:
Overall length when closed (Pin to Pin) - 200mm
Overall length when fully open (Pin to pin) - 280mm
Thread diameter - 10mm
Pin diameter - 10mm
Jaw width ID - 13mm
Jaw width OA - 20mm
Part Number : 80080-04
Stainless Marine Rigging Screw - 8mm
Dimensions:
Overall length when closed (Pin to Pin) - 175mm
Overall length when fully open (Pin to pin) - 255mm
Thread diameter - 8mm
Pin diameter - 8mm
Jaw width ID - 10mm
Jaw width OA - 15mm
Part Number : 80080-03
228
229
Galley
232. Novakool
Fridges & Freezers
NOVAKOOLER BCD-60 - Portable
Fridge
NOVAKOOLER BCD-45 - Portable
Fridge
NOVAKOOLER BCD-30 - Portable
Fridge
RFS7501 212 Litre Fridge/Freezer
R4500 122 Litre Fridge/Freezer
R2600 68 Litre Fridge/Freezer
R1600 36 Litre Fridge/Freezer
RFU9000 258 Litre Fridge/Freezer
RFU8000 193 Litre Fridge/Freezer
R3800 100 Litre Fridge/Freezer
R2300 59 Litre Fridge/Freezer
F2300 59 Litre Freezer
R1900 54 Litre Fridge/Freezer
TL2500 70 Litre Freezer
Door Latch for NovaKool Fridge/
Freezers
Door Security Latch for NovaKool
Fridge/Freezer
Hinges for NovaKool Fridge/
Freezer
Hingepin for NovaKool Fridge/
Freezer
NovaKool 100 - 240VAC Power
Supply Module
235. Novakool
Refrigeration Kits
Danfoss BD35F Compressor
FL Plate Kit
Novakool F Plate Kits
* Flex Line (optional on plate kits)
RT4 Freezer Compartment
RT6 Freezer Box
R26 Plate
236. CAN Gas
Ovens & Hobs
240. EVO Gas
Ovens & Hobs
CAN CU1302 Equator - Gas 3
Burner + Oven
CAN CU1300 Tropic - Gas 2 Burner
+ Oven
Kalahari - Built-In Oven with Grill
ENO Perigord – Build-In Gas Oven
ENO Open Sea Gas Burner + Oven
+ Grill
ENO Gascogne Gas Burner + Oven
+ Grill
ENO Bretagne – 3 Burner, SS Oven
with Grill
ENO Le Chef – 4 Burner, SS Oven
with Grill
237. CAN Hobs &
Sinks
CAN 3 Hob complete with Sink,
“Crystal” Finish
CAN 2 Hob complete with Sink,
“Crystal” Finish
Rectangular Single Burner Hob
with Sink
Single Burner Hob with Sink
238. CAN Hobs &
Burners
Flush Fitting Twin Burner Gas Hob
Flush Fitting Single Burner Gas Hob
Stainless Steel Twin Burner
Stainless Steel Single Burner
CAN Flush Mounted Single Burner
Hob
239. Hobs & Taps
Mixer Tap - Artemis
Mixer Tap - Aegle
Can Twin Mixer
Can Single Tap
Mixer Tap with adjust. spray and
shower tube
242. ENO Hobs
ENO Atoll - 1 Burner
ENO Duo - 2 Burner
ENO Build-in 2 Burner
ENO Build-in 3 Burner
243.Ovens & Hobs
Seaward Princess Electric 2 burner
+ Oven & Grill
Seaward Princess Euro Gas 3
Burner + Oven
Nelson Gas 2 Burner + Oven & Grill
Spinflo MK3 Caprice Gas 4 Burner
+ Oven & Grill
Spinflo TRIPLEX Rapid Gas 3
Burner + Oven & Grill
Parker Marine Stainless 2 Burner
Oven
246. Galley
Accessories
Marine grade Aluminium Alloy Gas
Tanks.
6 Piece Mug Set “Exclusive”
17 Piece Dinnerware Set
“Exclusive”
24 Piece Cutlery Set “Exclusive”
Plastic Bag Holder
Compact Dish Drainer
STACK-A-PLATE
Boaties Fry Pan
Boaties Baking Pan
Smartspace Frypan
Smartspace 3 Pot Set
Stainless Steel Deluxe Whistling
Kettle
Stainless Steel Kettle
ZipVac Marine and RV Kit
ZipVac Camping Kit
ZipVac King Fillet Bags
ZipVac Fillet Bags
Slip Stop - Non Slip Material
245. Sinks &
Pumps
Sink with Folding Tap & Glass lid
Oval Sink with Folding Tap & Glass
lid
Deep Round Sink
Round Marine Sink (Bowl Style)
TMC Electric Galley Pump & Faucet
TMC In-Line Pump - 280GPH
TMC Diaphram Foot Pump - 15LPM
TMC Hand Galley Pump & Spout
TMC Galley Pump - 100GPH
231
G a l l e y - Novakool Portable Fridges & Freezers
NOVAKOOLER BCD-60 - Portable Fridge
Portable 60 Litre Compressor Fridge or freezer
Plugs into your car, truck or boat.
Capacity: 63 Quarts / 60 Litres
Voltage: 12-24 VDC, Optional 240V Adaptor available for purchase.
Power Consumption: 4.6 amp @ 12V, 2.7 @ 24V
Weight: 25 KG
Dimensions: 660 x 400 x 520 mm
Strong corrosion resistant cabinet.
Electronic temperature control and readout .
* 50 x 82mm Step Size
Part Number : NCBCD60
NOVAKOOLER BCD-45 - Portable Fridge
Portable 45 Litre Compressor Fridge or freezer
Plugs into your car, truck or boat.
Capacity: 47 Quarts / 45 Litres
Voltage: 12-24 VDC, Optional 240V adaptor available for purchase.
Current: 4.6 amp - 12V, 2.7 - 24 amp (when operating)
Weight: 21 KG
Dimensions: 660 x 400 x 432 mm
Strong corrosion resistant cabinet.
Electronic temperature control and readout.
Top loading for maximum efficiency.
Part Number : NCBCD45
NOVAKOOLER BCD-30 - Portable Fridge
Portable 30 Litre Compressor Fridge or freezer
Plugs into your car, truck or boat.
Capacity: 31.5 Quarts / 29.8 Litres
Voltage: 12-24 VDC, Optional 240V Adaptor available for purchase
Current: 4.6 amp - 12V, 2.7 - 24 amp (when operating)
Weight: 18 KG
Dimensions: 560 x 400 x 393 mm
Strong corrosion resistant cabinet.
Electronic temperature control and readout.
Top loading for maximum efficiency.
Part Number : NCBCD30
232
G a l l e y - Novakool Fridges & Freezers
RFS7501 212 Litre Fridge/Freezer
RFU9000 258 Litre Fridge/Freezer
7.5 cu.ft (212 litres) total
interior volume
258 Litres total interior volume
2 cu.ft (57 litres) freezer
volume
Cut Out Dimensions:
864 (h) x 711 (w) x 559mm (d)
71 litres freezer volume
Cutout Dimensions:
1343 (h) x 591mm (w) x 578mm (d)
Part Number : NCRFU9000
Part Number : NCRFS7501
RFU8000 193 Litre Fridge/Freezer
R4500 122 Litre Fridge/Freezer
193 litres total interior volume
4.3 cu.ft (122 litres) volume
71 litres freezer volume
Cut Out Dimensions:
721mm (H) X 514mm (W)
x 533mm (D)
Cutout Dimensions:
1318 (h) x 591 (w) x 597mm (d)
Part Number : NCRFU8000
R3800 100 Litre Fridge/Freezer
3.5 cu.ft (100 litres) volume
Cut Out Dimensions:
721mm (H) X 514mm (W)
x 457mm (D)
Optional chine hugger
Part Number : NCR4500
R2600 68 Litre
Fridge/Freezer
2.4 cu.ft (68 litres) volume
Optional chine hugger
Cut Out Dimensions:
514mm (H) X 457mm (W)
x 495mm (D)
Part Number : NCR3800
Part Number : NCR2600
R2300 59 Litre
Fridge/Freezer
F2300 59 Litre
Freezer
2.1 cu.ft (59 litres) volume
2.1 cu.ft (59 litres) Freezer volume
Cut Out Dimensions:
721mm (H) X 425mm (W) x 356mm
(D)
Cut Out Dimensions:
721mm (H) X 425mm (W) x 356mm
(D)
Part Number : NCR2300
Part Number : NCRF2300
233
G a l l e y - Novakool Fridges & Freezers
R1900 54 Litre Fridge/Freezer
R1600 36 Litre Fridge/Freezer
54 Litres Total Volume =
48 litres of fridge space +
6 litre freezer box
36 Litres Total Volume =
30 litres of fridge space +
6 litre freezer box
Cut Out Dimensions:
525 (h) X 397 (w) x 450(d)
Cut Out Dimensions:
525 mm (H) X 397 mm (W) x
343 mm (D)
Part Number : NCR1900
TL2500 70 Litre Freezer
2.5 cu.ft (70 litres) volume
Cut Out Dimensions:
514(l) X 457 (w) x 476-686mm (h)
Base can be removed to lower
height. Compressor can be unbolted
and relocated to suit installation
Part Number : NCTL2500
Part Number : NCR1600
Door Latch for NovaKool Fridge/
Freezers
Comes with mounting screws.
Part Number : NCLATCH75
Door Security Latch for NovaKool
Fridge/Freezer
Part Number : NCLATCHS
Hinges for NovaKool
Fridge/Freezer
Part Numbers :
NCHINGE - Used as Right Top mount or Left
Bottom mount for door hinge.
NCHINGEL - Used as Left Top mount or Right
Bottom mount for door hinge.
Hingepin for NovaKool Fridge/
Freezer
Pin only for securing hinge to the fridge
door.
Part Number : NCHINGEP
NovaKool 100 - 240VAC Power Supply Module
100 - 240VAC Power Supply Module for NovaKool Fridges and Freezers.
This module is used when you want to run your NovaKool Fridge or Freezer on
US standard 110VAC Boat power or on NZ Standard 240VAC power.
This replaces the 12-24VDC module that comes standard with the NovaKool
Fridges and Freezers.
Part Number : NCF0FK
234
G a l l e y - Novakool Refrigeration Kits
Danfoss BD35F Compressor
RT4 Freezer Compartment
The Danfoss BD35F variable speed compressor
is the heart of a NovaKool
conversion kit.
Used for a refrigerator that
requires a small freezer
compartment.
High capacity fan cooled,
designed for hot and tropical
applications.
No need for additional water
pumps and relays.
Standard pre-charged line kit 12 ft (3.66M).
Reusable couplings between cooling unit and plates.
Part Number : NCDANFOSS
267 (l) x 317 (h) x 165mm (w)
Part Number : NCRT4
RT6 Freezer Box
Internal volume .54 cuft (15.3lts)
Mount vertical or horizontal.
356 (l) x 172 (h) x 279mm (d)
Part Number : NCRT6
FL Plate Kit
FL Plate is designed to be bent to
fit your application.
Used in larger refrigerators or
freezers.
914mm x 381mm
Part Number : NCFL
Novakool F Plate Kits
Used for all refrigerator or all freezer or a spill over combination
of refrigerator and freezer.
406mm x 254mm
Plates can be separated up to 457mm
Part Numbers :
NCF1 - Single Plate Kit
NCF2 - 2 Plate kit
NCF2FLEX - 2 Plates with Flex Line
* Flex Line (optional on plate kits)
* Flex line is designed to stay flexible during installation, even if you don’t get it right the first try
* Flex Line can be coiled and uncoiled over 200 times (standard copper lines harden after 3 bends in same spot)
* Flex line is designed for mobile applications including; Marine, RV and Trucking.
* Flex line has been used in mobile commercial refrigeration for over 10 years
* Flex line uses reusable quick couplings
* Flex line is available on all Nova Kool evaporators and can be uncoiled from 2 ft (.8m) to 12ft (4.7m).
235
G a l l e y - CAN Gas Ovens & Hobs
CAN CU1302 Equator - Gas 3 Burner + Oven
Stainless steel mirror finish inside and out.
Oven door features double thermal glass, silk-screen printed and thermometer.
Standard equipment: s/s gimbals, s/s pan-holders for each hob-unit burners, s/s oven
grid and s/s baking tray.
Burners rating: Each burner is fitted with thermocouple (safety valve).
Auxiliary: 1000 W - 73 g/h
Semi-rapid: 1750 W - 127 g/h
Rapid: 3000 W - 218 g/h
Measurements: 480mm (W) x 510 (H) x 420 (D)
Part Number : CU1302
CAN CU1300 Tropic - Gas 2 Burner + Oven
Stainless steel mirror finish inside and out.
Oven door features double thermal glass, silk-screen printed and thermometer.
Standard equipment: s/s gimbals, s/s pan-holders for each hob-unit burners, s/s oven
grid and s/s baking tray.
Burners rating: Each burner is fitted with thermocouple (safety valve).
2 x Semi-rapid: 1750 W - 127 g/h
Measurements: 400mm (W) x 510 (H) x 420 (D)
Part Number : CU1300
Kalahari - Built-In Oven with Grill
In-built stainless steel gas oven with mirror stainless steel finish is ideal for under bench
installations in motorhomes and caravans.
Construction is manufactured completely with stainless steel. Both external and
internal is finished in mirror polished stainless.
Door oven manufactured with double glazed thermal glass with an in-built thermometer.
Supplied with:
Stainless oven rack
Stainless baking tray
Oven Specifications
Capacity: 30 litre
Semi-rapid: 1750 W with saftey thermocouple cut-out
Grill : 2500 W”
Weight: 28Kg
Dimensions:375 (w) x 380 + 40 * (d) x 460 (h)
* Allows for gas pipe fittings
Measurements: 500mm (w) x 420 (h) x 410 (d)
Part Number : CU1305
236
G a l l e y - CAN Hobs & Sinks
CAN “Randi” Hob complete with Sink
New Model from CAN of Italy
Rectangular Gas Cooker and in-built Sink
All stainless finish with gas burner, round sink.
Finished with tempured smoke glass lid with anti-vibration washers and
disappearing hinges.
4mm tempured glass cover can be used as a work surface or support plane.
Excludes tap.
Dimensions
530 (w) x 325 (d) x 250 + 120 (h) mm
Part Number : FL1323
CAN 2 Hob complete with Sink, “Crystal” Finish
Flush mounting gas hob units made with tempered anti-scratch crystal glass complete with s/s sink.
Gas hob-unit 2 burners complete with sink
Sink dimensions: 300 mm(dia) x 180mm(h) (item LA1417).
Overall Dimensions: 600mm x 420mm
BURNERS: all burner equipped with thermocouple (safety valve).
2 x SEMI-RAPID: 1750 W-127 g/h
Part Number : PV1360
Rectangular Single Burner Hob with Sink
S/S flap hob unit c/w pan-holder, s/s sink and folding faucet. The hob
is complete with temperate glass lid.
Height: 180mm x Depth: 320mm x Length: 350mm
Hob-unit Burners: 1 semi-rapid capacity 1750 W
Part Number : LC1710
Single Burner Hob with Sink
S/S flap hob unit c/w pan-holder, s/s sink and folding faucet.
The hob is complete with temperate glass lid.
All burners fitted with thermocouple (safety valve).
SEMI-RAPID: capacity 1750 W
HEIGHT: 180mm DIAM: 300mm
HOB-UNIT BURNERS: 1 semi-rapid capacity 1750 W
Part Number : LC1701
237
G a l l e y - CAN Hobs & Burners
Flush Fitting Twin Burner Gas Hob
Rectangular gas hob-unit 2 burners complete with tempered smoked glass
lid, with burners with self-blocking flame lid, s/s built-in support grid fixed
with anti-vibration rubber-washers and disappearing hinge. On top of the
unit there is placed a special sleeve that has to be used as seat for the
column type pan-holder.
BURNERS: all burner equipped with thermocouple (safety valve).
1 x AUXILIARY: 1000 W-73g/h
1 x SEMI-RAPID: 1750 W-127 g/h
Width: 530mm x Depth: 325mm x External Height: 145mm
Part Number : FC1336
Flush Fitting Single Burner Gas Hob
Round gas hob-unit 1 burner complete with tempered smoked glass lid, with
burners with self-blocking cap, s/s built-in support grid fixed with anti-vibration
rubber-washers and disappearing hinge.
On top of the unit there is placed a special sleeve that has to be used as seat
for the column type pan-holder.
BURNERS: all burner equipped with thermocouple (safety valve).
1 x SEMI-RAPID: 1750 W-127 g/h
Diameter: 340mm x External Height: 70mm
Part Number : FC1345
Stainless Steel Twin Burner
Manufactured in mirror finished stainless steel complete with fixing plates,
interchangeable with CAN gimbals system.
BURNERS RATING: All burner fitted with thermocouple (safety valve).
AUXILIARY: 1000 W - 73 g/h
SEMI-RAPID: 1750 W - 127 g/h
Width: 440mm x Height: 90mm x Depth: 290mm
Part Number : FN1332
Stainless Steel Single Burner
Manufactured in mirror finished stainless steel complete with fixing plates,
interchangeable with CAN gimbals system.
BURNERS RATING: All burner fitted with thermocouple (safety valve).
SEMI-RAPID: 1750 W - 127 g/h
Width: 210mm x Height: 90mm x Depth: 290mm
Part Number : FN1330
238
G a l l e y - CAN Hobs & Taps
CAN Flush Mounted Single Burner Hob
CAN Flush Mounted Single Burner Hob with Pot Holder
Manufactured in mirror finished stainless steel. Perfect for small applications
such as camper vans and small boats. (That have suitable ventilation)
BURNER RATING: The burner is fitted with a thermocouple (safety valve).
SEMI-RAPID: 1750 W - 127 g/h
Part Number : PC1320
Can Twin Mixer
Mixer Tap - Artemis
* Chrome Plated
Dimensions:
155mm (L) x 125mm (H)
Part Number : 99962
* Chrome plated with
swivelling faucet
* Double handed with
ceramic valves.
Part Number : RB1485
Can Single Tap
* Chrome plated
* Ceramic valves
* Swivelling faucet.
Mixer Tap - Aegle
Part Number : RB1486
*Chrome Plated
Dimensions:
190 (L) x 120mm (H)
Part Number : 99999
Mixer Tap with adjust. spray and
shower tube
* Chrome Plated
* Adjustable spray & shower
tube 150cm
Dimensions:
240mm (L) x 185mm (H)
Part Number : 99960
239
G a l l e y - ENO Ovens & Hobs
ENO Perigord – Build-In Gas Oven
Strong and ergonomic, the ENO build-in oven, with its stainless steel fascia plate
and high resistant enamelled inner oven, allows for easy cooking. It is fitted with a
timer and door locking system.
Made in France and installed on many European built production boats (Beneteau,
Jeanneau, Hanse etc.). For yachts and offshore power vessels these ranges come
complete with gimbal mountings. For a fixed installation these ranges also have
built in mounting feet so they can be rested on any flat surface.
Stylish, Quality Stoves. Made in France
Dimensions: 550 (h) x 490 (w) x 540mm (d)
Part Number : Perigord
ENO Open Sea Gas Burner + Oven + Grill
These gas galley ranges are both stylish and functional. Constructed of highly polished marine grade stainless steel that lasts well in the
marine environment and is easy to clean.
Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power
vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they
can be rested on any flat surface.
Features:
*8000 BTU Rapid burner and 5600 BTU medium burner
*Enamelled oven offers good heat retention
*Polished Stainless Steel exterior
*Flame Failure Cut Off’s on all burners for safety
*Electronic spark ignition powered by an AA battery
*Stainless splash back
*Removable trivet grid for easy cleaning
*Pan holders included
Part Numbers :
141341 - ENO Open Sea – 2 Burner, SS Oven with Grill (470 (h) x 504 (w) x 410mm (d)
143341 - ENO Open Sea – 3 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d)
ENO Gascogne Gas Burner + Oven + Grill
These gas galley ranges are both stylish and functional. Constructed of highly polished marine grade stainless steel that lasts well in the
marine environment and is easy to clean.
Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power
vessels these ranges come complete with gimbal mountings. For a fixed installation
these ranges also have built in mounting feet so they can be rested on any flat surface.
Features:
*Enamelled oven offers good heat retention
*Polished Stainless Steel exterior
*Flame Failure Cut Off’s on all burners for safety
*Electronic spark ignition powered by an AA battery
*Removable trivet grid for easy cleaning
*Pan holders included
Part Numbers :
181341 - ENO Gascogne – 2 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d)
183341 - ENO Gascogne – 3 Burner, SS Oven with Grill (466 (h) x 504 (w) x 410mm (d)
240
G a l l e y - ENO Ovens & Hobs
ENO Bretagne – 3 Burner, SS Oven with Grill
This cooker opens the doors to the exclusive world of top range cookers for boating. Thanks to its large cook-top, cooking is like being
at home. Whether for the choice of material, shine of the stainless steel, ergonomics of the controls, precision of the thermostat or
performance of the grill. The elegance and efficiency of this cooker will meet the expectations you have for your boat.
Made in France and installed on many European built production boats (Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power
vessels these ranges come complete with gimbal mountings. For a fixed installation these ranges also have built in mounting feet so they
can be rested on any flat surface.
Features:
*3 Burners
*Enamelled oven offers good heat retention
*Polished Stainless Steel exterior
*Flame Failure Cut Off’s on all burners for safety
*Electronic spark ignition powered by an AA battery
*Removable trivet grid for easy cleaning
*Pan holders included
Dimensions: 470 (h) x 500 (w) x 527mm (d)
Part Number : Bretagne
ENO Le Chef – 4 Burner, SS Oven with Grill
This cooker opens the doors to the exclusive world of top range cookers for boating. Thanks to its large cook-top, cooking is like being
at home. Whether for the choice of material, shine of the stainless steel, ergonomics of the controls, precision of the thermostat or
performance of the grill. The elegance and efficiency of this cooker will meet the expectations you have for your boat.
This is the ideal cooker for big boats. It boasts the biggest capacity oven on the market (42L) and offers all the sophistication and
performance of the Bretange model.
Made in France and installed on many European built production boats
(Beneteau, Jeanneau, Hanse etc.). For yachts and offshore power
vessels these ranges come complete with gimbal mountings. For a fixed
installation these ranges also have built in mounting feet so they can be
rested on any flat surface.
Features:
*4 Burners
*Enamelled oven offers good heat retention
*Polished Stainless Steel exterior
*Flame Failure Cut Off’s on all burners for safety
*Electronic spark ignition powered by an AA battery
*Removable trivet grid for easy cleaning
*Pan holders included
Dimensions: 576 (h) x 500 (w) x 527mm (d)
Part Number : 074341
241
G a l l e y - ENO Hobs
ENO Atoll - 1 Burner
Small and compact, this stove easily fits abroad whilst offering maximum safety and
reliability.
Stylish, Quality Stoves. Made in France
BURNERS RATING: Burner fitted with thermocouple (safety valve).
AUXILIARY: 2kW
Dimensions: 110 (h) x 290 (l) x 350mm (d)
Part Number : 061281
ENO Duo - 2 Burner
A high-performance and light stove, with two burners and made entirely
of stainless steel. It comes complete with a gimbal it and a set of pan
holders.
Stylish, Quality Stoves. Made in France
BURNERS RATING: Burners fitted with thermocouple (safety valve).
AUXILIARY: 2.5kW
SEMI-RAPID: 1.75kW
Dimensions: 250 (h) x 500 (l) x 392mm (d)
Part Number : 062381
ENO Build-in Hobs
This built-in cooking unit with two options is made out of stainless steel and provides substantial cooking capacity for a compact design.
It is particularly suited for motor-boats and catamarans.
Stylish, Quality Stoves. Made in France
ENO Build-in 2 Burner
BURNERS RATING: Burners fitted with thermocouple (safety valve).
AUXILIARY: 2.5kW
SEMI-RAPID: 1.75kW
Dimensions: 80 (h) x 465 (l) x 335mm (d)
Part Number : 432041
ENO Build-in 3 Burner
BURNERS RATING: Burners fitted with thermocouple (safety valve).
AUXILIARY: 2.5kW
SEMI-RAPID: 1.75kW
SPARE: 1kW
Dimensions: 80 (h) x 465 (l) x 385mm (d)
Part Number : 433341
242
G a l l e y - Ovens & Hobs
Seaward Princess Electric 2 burner + Oven & Grill
Features:
*2 high speed (1100 watt) burners
*Door with window and full width oven handle
*Adjustable oven rack
*Thermostatically controlled oven
*Full-size oven and broiler with porcelain enamel finish
*Standard sea rail
*1250 watt bake element
*1300 watt broiler element
*Interior oven light with on/off switch
*Lift cover included
*UL 858 or CE certified
* Made in USA
NOTE: Picture shows black glass door. But this listed model has a stainless
steel door.
Part Number : 2342-1311
Seaward Princess Euro Gas 3 Burner + Oven
Features:
*Thermocouple protected burners with Piezo ignition
*Sealed burners make cleaning easy
*Door with window and full-width oven handle
*Adjustable oven rack
*Thermostatically controlled oven
*Full-size oven and broiler with porcelain enamel finish
*One piece stove top grate
*7,000 BTU’s per top burner
*10,000 BTU oven burner
*ANSI cetified
*Made in USA
Overall Dimensions:
Width 21-3/4” x Depth 19-7/16” x Height 22-1/16”
NOTE: Picture shows black glass door. But this listed model has a stainless
steel door.
Part Number : 3374-1001
Nelson Gas 2 Burner + Oven & Grill
Manufactured in the UK. This Techma oven is extremely popular and is
installed in many boats and caravans throughout NZ. Solidly constructed and
primarily of stainless steel including the inside of the oven.
Glass door and flame failure feature on all burners. Comes complete with
baking tray, enamelled grill pan and adjustable oven shelf. Optional Sea Rails,
Pot holder set and gimbal set sold separately.
1 x 1.5Kw thermostatically controlled oven burner
2 x 1.5kw hotplate burners
1 x 1.5Kw grill
Dimensions: 525 (h) x 450 (w) x 420 (d) mm
Part Number : 5002
243
G a l l e y - Ovens & Hobs
Spinflo MK3 Caprice Gas 4 Burner + Oven & Grill
Features:
*Seamless Oven and Grill
*Multi-Level Oven and Grill Shelf Points
*3 Large Burners and 1 Smaller Burner
*Flame Failure to all Burners
*12 volt Electronic Ignition
*Non-reflective oven door allows viewing while Cooking
*Thermostatically controlled oven burner
*Flush mounting glass lid
*Rapid Oven heat up times
*Chrome Knobs with T bar Styled Handles
Energy Safety Compliance # SER8187A
Dimensions:
513 (w) x 644 (h) x 500 (d) mm
Part Number : 5010
Spinflo TRIPLEX Rapid Gas 3 Burner + Oven & Grill
Features:
*3 Burners with Grill and Oven
*Seamless Oven and Grill
*Multi Level Oven and Grill Shelf Points
*Flame Failure to all Burners
*12 volt Electronic Ignition
*Non-reflective oven door allows viewing while cooking
*Thermostatically controlled oven burner
*Flush mounting glass lid
*Rapid Oven heat up times
*Satin Knobs
Energy Safety Compliance # SER8188A
Dimensions:
456 (w) x 463 (h) x 500 (d) mm
Part Number : 5012
Parker Marine Stainless 2 Burner Oven
Features:
*Flame failure device and temperature gauge. Small footprint
*19 litre capacity oven
*2 burner gas hob (Hobs: 2 x 3.5 kW Burners)
*Stainless steel construction
*Glass see through oven door
*Flame fail safety
*Includes pot racks and gimbals
Dimensions: 450 (w) x 315 (d) x 485mm (h)
Part Number : FO600SN
244
Galley -
Sinks & Pumps
Sink with Folding Tap & Glass lid
Oval Sink with Folding Tap & Glass lid
Stainless Steel sink with
temperated glass cover.
Folding single tap.
Oval Stainless Steel Sink with
folding tap and Tempered
Glass lid.
Dimensions: 180mm (H) x
320mm (D) x 350mm (L)
Part Number : LR1760
Dimensions: 510mm (W) x
390mm (D) x 155mm (H)
Part Number : LR1450
Deep Round Sink
Round Marine Sink (Bowl Style)
* Heavy duty polished
stainless steel
* Heavy duty polished
stainless steel
* Solid lip for flush mounting
* Solid lip for flush mounting
Drain Hole Dia: Ø62mm
Bowl Depth: 180mm
Bowl Diameter: IDØ260mm ODØ292mm
Drain Hole Dia: Ø52mm
Bowl Depth: 127mm
Bowl Diameter: IDØ260mm - ODØ292mm
Part Number : 40032-02
Part Number : 40030
TMC Electric Galley Pump & Faucet
TMC Hand Galley Pump & Spout
* Zinc-alloy base and
Stainless steel swing spout.
* Built-in switch.
* Fresh or Salt water use.
Chrome-Plated die cast top with plastic body
Draws: 1.5A at 12V DC.
Pumps: 100 GPH (378LPH)
Delivery Head: up to 2m
Use 3/8” I.D. hose
Capacity: 60 GPH
Self-Priming
Part Number : 71602
15/32” (12mm) hose connection.
* Non-self priming centrifugal pump must be mounted below
water level or tank.
Part Number : 06301
TMC In-Line Pump - 280GPH
TMC Galley Pump - 100GPH
Sonic-welded and submersible unit.
Light weight to suspend in pipework.
1/2” (12.7mm) hose connection.
Quiet electric pump
Compact and easy to install.
Draws: 3A at 12V DC.
Pumps: 280 GPH (1060LPH)
Delivery Head: 7m (requires priming) Max 60°C
* Non-self priming centrifugal pump, designed for
intermittent operation.
Use with 15/32” (12mm) hose.
Includes clamp
Draws: 1.5A at 12V DC.
Delivery Head: upto 2m Pumps:
100 GPH (378LPH)
Meets CE Compliance.
* Non-self priming centrifugal pump must be mounted below water
level or tank. Use with fresh and salt water.
Part Number : 0430107
Part Number : 06302
245
G a l l e y - Pumps & Alloy Gas Bottles
TMC Diaphram Foot Pump - 15LPM
Smooth durable action with strong frame.
Hose connections are fully adjustable so that you can orientate
the pipe work to suit your installation.
* Multi-directional inlet and outlet connections
* Dual action pump
* Self priming
* CE Certified
* ISO-9001 & ISO-14001 certification
Capacity: 240GPH (908LPH)
Hose: use 1/2” (12.7mm) ID hose.
Dimensions: 236.8(L) x 152.6(W) x 123.5(H)
Part Number : 70701
Marine grade Aluminium Alloy Gas Tanks.
Fully weather resistant and impervious to salt. Ideal for gas cylinders on a boat or outside your home.
Corrosion resistant construction and material to ensure maximum life in the marine environment.
Patented one piece, one seam weld construction.
Our cylinders are made from special refined Al-Mg-Si
alloy, and have many advantages over steel cylinders.
* At the same volume, the mass of our cylinders are half
that of steel
* Long working life
* Non rust boat gas cylinder
* Can be used without any anti-corrosion coating
* Because of cleanliness and resistance of the alloy it
can be used for cooling gases
* The weld is on the most favourable part of the
pressurised cylinder so it is loaded less
* There is no spark-danger.
* Can be recycled
Approvals:
New Zealand & Australian Approved.
EN12-862/2000 Inspection Authority: TUV. Germany.
Part Numbers :
LPG2.2 (2.2 kg Capacity) LPG5
(5 kg Capacity)
246
LPG10 (10 kg Capacity) LPG15 (15 kg Capacity)
LPG20 (20 kg Capacity)
LPG23 (23 kg Capacity)
G a l l e y - Galley Accessories
6 Piece Mug Set “Exclusive”
6 piece mug set.
Made of 100% Melamine.
Dishwasher and microwave safe.
Part Number : 57218
6 Piece Wine Glass Set “Exclusive”
6 piece wine glass set.
Made of 100% Melamine.
Dishwasher and microwave safe.
Part Number : 57254
Water / beverage glass Set “Exclusive”
6 piece Water / beverage glass set.
Made of 100% Melamine.
Dishwasher and microwave safe.
17 Piece Dinnerware Set
“Exclusive”
Made of 100% Melamine.
Dishwasher and microwave safe.
Includes:
*Dinner Plate, Ø 26cm, 4 pieces
*Dessert Plate Ø 20cm, 4 pieces
*Cereal Bowl Ø 15cm, 4 pieces
*Mug, 4 pieces
*Salad Bowl Ø 24cm, 1 piece
Part Number :
57350
24 Piece Cutlery Set “Exclusive”
Made from stainless steel and ABS
plastic.
6 x Forks, Knives, Spoons and
Teaspoons.
Dishwasher safe.
Part Number : 57255
Part Number : 57208
Plastic Bag Holder
Compact Dish Drainer
Reuse your grocery bags. Store grocery bags, trash bags and dryer
sheets efficiently.
Compact and lightweight dish drainer for boats and motorhomes
Plastic bag holder/dispenser mounts
easily on walls or inside cabinets with
screws or double-sided tape.
Holds up to 25 grocery bags.
Patented.
Part Number : DISHDRAINER
Part Number : 5000
STACK-A-PLATE
Use in your cabinet to keep plates organised, and to stop them from sliding and rattling. Plates stay in place while traveling and are
more protected from breakage.
Set of two, one fits plates up to 185mm, the other fits plates up to 260mm.
Bright White
Dishwasher safe
Plate stacker saves room
Saves damage
Stops annoying chinking
Part Number : STACKAPLATE
247
G a l l e y - Galley Accessories
Boaties Fry Pan
** New improved Model**
New Features
* Stainless Steel Base allows use on induction hobs
* Silicone Handle for a more comfortable grip
Frustrated trying to fit a round frypan on to a square stove?
The answer - Boaties Frypan
* Pan Measurements 250 x 200mm the same approximate
cooking surface as a 255mm round fry pan
* Heavy gauge aluminium with stainless steel base gives an even and stable
heat transfer
* High Quality non-stick surface ensures a longer pan life
* Compact Ovenproof Handle easy to grip and high enough to clear a fiddle rail
Part Numbers : FC10 (Fry Pan)
FC11 (Lid)
Boaties Baking Pan
Now with one pan you can roast, braise and bake for the whole
crew!
* Designed for one-handed use making removal from the oven
easier
* Compact Detachable Handle is always cold when used and
stows away neatly with the pan
* Oven and Stove Top use
* Size 31 x 21 x 6cm - over 2 litres volume
* Heavy Gauge Aluminium gives an even and stable heat transfer
* Double Coated Non-stick surface ensures a long pan life
Part Number : FC12
Smartspace Frypan
SmartSpace Frying Pan is a new concept in cookware
that fits on even the most compact stoves. Perfect for the
RV, boat or baches were space is essential. The non-stick
finish makes washing up effortless.
Cookware Features:
Stainless steel base suitable for gas, electric or induction
cooking
Durable 3mm aluminium walls
Teflon coated non-stick interior (high grade)
Enamel baked exterior
Removable handle does not transfer heat
Dishwasher safe
Silicone mat; Place hot pots on mats to protect your benchtop.
Use between pots when stacking to protect the non-stick coating.
High sides to reduce splattering
Dimensions (mm): 250L x 215W x 55H
Part Number : FC13
248
Removeable Handle
G a l l e y - Galley Accessories
Smartspace 3 Pot Set
SmartSpace 3 pot set is a new concept in cookware that fits on even the
most compact stoves. Perfect for the RV, boat or baches were space
is essential. Each pot stacks neatly inside the next creating a compact
easy to store cookware solution. The non-stick finish makes washing up
effortless.
Cookware Features:
Stainless steel base suitable for gas, electric or induction cooking
Durable 3mm aluminium walls
Teflon coated non stick interior (high grade)
Enamel baked exterior
Stainless steel lid
Silicone heat resistant knob
Steam vent
Removable handle does not transfer heat
Dishwasher safe
Silicone mats; Place hot pots on mats to protect your benchtop. Use between pots when stacking to protect the non-stick coating.
Set includes;
2.8L Pot, Lid and Silicone Pad
1.8L Pot, Lid and Silicone Pad
1.5L Pot, Lid and Silicone Pad
Detachable handle
Dimenions (mm)
2.8L pot: 210L x 210W x 140H
1.8L pot: 185L x 185W x 124H
1.5L pot: 162L x 162W x 106H
Part Number : POT3
Removeable Handle
Stainless Steel Deluxe Whistling Kettle
Stainless Steel Kettle
2.5 litre capacity
2 litre capacity
Remove the lid to fill with water.
Simply open the spout cover with a flick of your thumb to pour.
Simply open the spout cover with a push of your thumb to
pour or to fill with water.
193mm diameter base
210mm total height
193mm diameter base
140mm total height
Part Number : KETD
Part Number : KETSTD
249
G a l l e y - ZipVac Vacuum Bags
ZipVac Marine and RV Kit
1 x lightweight manual pump
2 x 1 litre bags
2 x 4 litre bags
1 x fillet size bag
Part Number : ZVMARINERV
ZipVac Camping Kit
1 x lightweight manual pump
2 x 1 litre bags
2 x 4 litre bags
2 x 8 litre bags
Part Number : ZVCAMPKIT
ZipVac King Fillet Bags
5 x king fillet bags (35cm x 71cm)
Part Number : ZVKINGFILLET
ZipVac Fillet Bags
10 x Fillet Bags (22cm x 50cm)
Part Number : ZVFILLETREFILL
Slip Stop - Non Slip Material
Non slip material cut to size 1ft x 12ft roll
Keep everything safe and secure by preventing slipping and sliding. Washable, easily trimmed material works in tool boxes, rugs, van
floors, shelves, dash boards or anywhere things slide around or rattle in your RV. Use as a liner between plates, cups and appliances.
Available in Cream or Blue
Part Numbers :
STOPSLIP BLUE
STOPSLIP CREAM
250
251
Hatches
254. Nuova Rade
Deck Hatches
Deck Hatch 448mm x 268mm
Deck Hatch 480mm x 480mm
Deck Hatch - Round (Small)
255. Nuova Rade
Rectangular Hatch 243 x 607
Rectangular Hatch 278 x 378
Rectangular Hatch 270 x 375
Rectangular Hatch 315 x 440
Square Hatch 370 x 375
Rectangular Hatch 353 x 606
Rectangular Hatch 460 x 510
Large Access Hatch
Access Hatch - Removable Lid
306 x 356
Access Hatch - Removable Lid
380 x 380
257. Lalizas
Rectangular Hatch 250 x 606
Rectangular Hatch 276 x 376
Rectangular Hatch 358 x 606
Rectangular Hatch 460 x 511
258. Nuova Rade
Tackle Box 7 Drawer
Storage Hatch 270 x 375 with Box
Storage Hatch 243 x 607 with Box
Storage Hatch 353 x 606 with Box
1kg Fire Extinguisher Box - Clear
Door
Small Hatch with Box for Control
Boards
356 x 397 Storage Hatch
for 3 kg LPG Bottle
590 x 480 Storage Hatch
for 5kg LPG Bottle
261. Inspection
Ports
4” Inspection Port “Top Line”
5” Inspection Port “Top Line”
6.5” Inspection Port “Top Line”
4” Inspection Port - Pressure Fit
5” Inspection Port - Pressure Fit
4” Inspection Port
5” Inspection Port
6” Inspection Port
6” Inspection Port with Bag
6.5” Inspection Port - Pressure Fit
6” Inspection port - Black with
Clear
260. Glove Boxes /
Storage Shelf
262. Hatch
Glove Box with Lock
Accessories
Storage Hatch 165 x 285 with Box
Access Hatch 165 x 285
Utility Box with Lid 110 x 81
Side-mount Utility Container
Handle for Top Line 180 Hatch
Replacement Hatch Handle
Hatch Stay 200-370mm
Hatch Stay 330-600mm
Hatch Insect Screen
Windtrap Ventilating Sail for
Hatches
Gas Support Struts
Lock Assembly for Top Line Hatch
Porthole - Oval 225 x 460mm
Porthole - Oval 128 x 400mm
263. Lenco Hatch
Actuators
Lenco Hatch Lifter - HL800S
Lenco Hatch Lifter - HL1200S
Lenco Hatch Lifter - HL2400S
Lenco Hatch Lifter - HL3000S
Lenco Hatch Lifter - HL1600S/24V
Lenco Hatch Lift Slide Bracket
252
H a t c h e s - Nuova Rade Deck Hatches
Deck Hatch 448mm x 268mm
Nuova Rade - Deck Hatch with tinted window includes inside frame
and opening stay.
High quality UV resistant ASA
Strong enough to be walked over.
Dimensions: 448mm x 268mm (external size)
Cut Out: 389mm x 209mm
CE Approved - Made in Europe
Part Number : 4648
Deck Hatch 480mm x 480mm
Nuova Rade - Deck Hatch with tinted window
includes inside frame and opening stay.
High quality UV resistant ASA
Strong enough to be walked over.
Dimensions: 480mm x 480mm (external size)
Cut Out: 430mm x 430mm
CE Approved - Made in Europe
Part Number : 4650
Deck Hatch - Round (Small)
Nuova Rade - Deck Hatch with tinted window
includes inside frame and opening stay.
High quality UV resistant ASA
Strong enough to be walked over.
Overall Diameter: 378mm
Cut Out Diameter: 316mm
CE Approved - Made in Europe
Part Number : 195256
254
H a t c h e s - Nuova Rade
Rectangular Hatch 270 x 375
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 375mm x 270mm
Cut Out: 300mm x 200mm
Part Numbers :4655
(white)
4656
(grey)
Rectangular Hatch 243 x 607
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 607mm x 243mm
Cut Out: 530mm x 173mm
Part Numbers : 4653
(white)
4654
(grey)
Rectangular Hatch 315 x 440
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 440mm x 315mm
Cut Out: 363mm x 243mm
Part Numbers :4663
(white)
4664
(grey)
Square Hatch 370 x 375
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 370mm x 375mm
Cut Out: 300mm X 300mm
Part Numbers :4657 (white)
4658 (grey)
255
H a t c h e s - Nuova Rade
Rectangular Hatch 353 x 606
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 606mm x 353mm
Cut Out: 530mm x 283mm
Part Numbers : 4659 (white)
4660
(grey)
Rectangular Hatch 460 x 510
Nuova Rade - Italian Made Hatch
Top Line 180° Opening
UV resistant ASA
Strong enough to be walked over.
External Dimensions: 510mm x 460mm
Cut Out: 445mm x 390mm
Part Numbers : 4661
(white)
4662
(grey)
Large Access Hatch
Nuova Rade - Italian Made Hatch
Removable hatch cover.
UV resistant ASA
External Diameter: 315mm
Access Hole: 235mm (dia)
Cut Out for installation: 265mm (dia)
Part Number : 4625
(white)
Access Hatch - Removable Lid 306 x 356
Nuova Rade - Italian Made Hatch
Removable hatch cover.
UV resistant ASA
External Dimensions: 306mm x 356mm
Internal Dimensions: 246mm x 296mm
Part Numbers : 4642
(white)
4643
(grey)
Access Hatch - Removable Lid 380 x 380
Nuova Rade - Italian Made Hatch
Removable hatch cover.
UV resistant ASA
External Dimensions: 380mm x 380mm
Internal Dimensions: 295mm x 295mm
Part Number : 4644
256
(white)
H a t c h e s - Lalizas
Rectangular Hatch 250 x 606
Lalizas Hatch
180° Opening
External Dimensions: 606mm x 250mm
Cut Out: 530mm x 173mm
Part Number : 11103
(white)
Rectangular Hatch 276 x 376
Lalizas Hatch
180° Opening
External Dimensions: 376mm x 276mm
Cut Out: 300mm x 200mm
Part Number : 10262
(white)
Rectangular Hatch 358 x 606
Lalizas Hatch
180° Opening
External Dimensions: 606mm x 358mm
Cut Out: 530mm x 280mm
Part Numbers : 10264 (white)
10265 (grey)
Rectangular Hatch 460 x 511
Lalizas Hatch
180° Opening
External Dimensions: 511mm x 460mm
Cut Out: 442mm x 386mm
Part Numbers :11101 (white)
11102
(grey)
257
H a t c h e s W i t h B o x e s - Nuova Rade
Tackle Box 7 Drawer
Nuova Rade - Italian Made Hatch with box and 7 drawers
Top Line 180° Opening
UV resistant White ASA
Great for organising small things such as fishing tackle.
Dimensions: 375mm x 270mm x 160mm (D)
Cut Out: 305mm x 210mm
Part Numbers : 4504 (white)
4503 (grey)
Side-mount Housing with Door
Designed for holding a shower nozzle
Dimensions: 145mm x 190mm x 80mm(D)
Cutout: 114mm x 160mm
Part Number : 6570
Storage Hatch 270 x 375 with Box
Nuova Rade - Italian Made Hatch with box
Top Line 180° Opening
UV resistant White ASA
Dimensions: 375mm x 270mm x 160mm (D)
Cut Out: 305mm x 210mm
Part Numbers : 4505 (white)
4506 (grey)
Storage Hatch 243 x 607 with Box
Nuova Rade - Italian Made Hatch with box
Top Line 180° Opening
UV resistant White ASA
Strong enough to be walked over.
Dimensions: 607mm x 243mm x 182mm (D)
Cut Out: 530mm x 173mm
Part Number : 4652
Storage Hatch 353 x 606 with Box
Nuova Rade - Italian Made Hatch with box
Top Line 180° Opening
UV resistant White ASA
Strong enough to be walked over.
Dimensions: 606mm x 353mm x 340mm (D)
Cut Out: 530mm x 283mm
Part Number : 4665
258
H a t c h e s W i t h B o x e s - Nuova Rade
1kg Fire Extinguisher Box - Clear Door
Nuova Rade - Italian Made Hatch and box
Allows safe and protected storage of a fire extinguisher in the cockpit or dashboard.
UV resistant White ASA
Dimensions: 434mm x 196mm x 105mm (D)
Cut Out: 374mm x 124mm
Part Number : 4677
Small Hatch with Box for Control Boards
Small Hatch with internal surround for mounting hardware.
When equipment needs to be accessible and yet kept dry this hatch provides the ideal enclosure.
UV resistant White ASA
Multiple uses:
*Battery Isolating Switches
*Electrical Switch Panels
*Lighting; Entertainment Controls
External Dimensions: 275mm x 375mm x 80mm(D)
Cutout: 210mm x 310mm
Part Numbers :
4680
(box with white hatch)
4681 (box with transparent hatch door)
356 x 397 Storage Hatch
for 3 kg LPG Bottle
Nuova Rade - Italian Made Hatch with box
Top Line 180° Opening
UV resistant White ASA
External Dimensions: 356(W) x 397(H) x 240mm(D)
Cut Out for hatch: 338mm x 305mm
Part Number : 4672
590 x 480 Storage Hatch
for 5kg LPG Bottle
Nuova Rade - Italian Made Hatch with box
Top Line 180° Opening
UV resistant White ASA
Cut Out for hatch: 525mm x 415mm
Part Number : 4673
259
H a t c h e s - Glove Boxes / Storage Shelf
Glove Box with Lock
Black ABS with a Non Magnetic Marine Lock
Dimensions: 13-1/2” (L) x 5-1/2” (H) x 7-1/2” (D)
Inside: 12-1/2” (L) x 4 (H) x 6-1/2” (D)
Part Number : 71052
Storage Hatch 165 x 285 with Box
Nuova Rade - Italian Made Hatch with box
180° Opening, UV resistant ASA
Dimensions: 165mm(H) x 285mm(W) x 250mm(D)
Cut Out: 140mm x 250mm
Part Number : 4635W
Access Hatch 165 x 285
Nuova Rade - Italian Made Hatch
180° Opening, UV resistant ASA
Great to make your own Glove box!
Dimensions: 165mm(H) x 285mm(W)
Cut Out: 140mm x 250mm
Part Number : 4634W
Utility Box with Lid 110 x 81
Nuova Rade - Italian Made box with lid
UV resistant ASA
Dimensions: 110mm(H) x 235mm(W) x 150mm(D)
Cut Out: 81mm x 198mm
Part Number : 4632W
Side-mount Utility Container
Available with or without built in glass holders
Dimensions: 561mm(L) x 266mm(W) x 125mm(D)
Cutout: 496mm x 200mm
Part Numbers :
4678
(Storage Shelf Container)
4679
(Storage Shelf with glass holders)
260
H a t c h e s - Inspection Ports
4” Inspection Port “Top Line”
4” Inspection Port
* Water Resistant O-Ring
* Self centering thread
* Water Resistant O-Ring
* Screw in-out design
162mm over all
108mm internal hole
148mm over all
105mm internal hole
Part Numbers : 4361 (White)
4363 (Grey)
Part Numbers : 4354 (Black)
4357 (White)
5” Inspection Port “Top Line”
5” Inspection Port
* Water Resistant O-Ring
* Self centering thread
* Water Resistant O-Ring
* Screw in-out design
187mm over all
133mm internal hole
168mm over all
127mm internal hole
Part Numbers : 4364 (White)
4366 (Grey)
Part Numbers : 4358 (Black)
4355 (White)
6.5” Inspection Port “Top Line”
6” Inspection Port
* Water Resistant O-Ring
* Self centering thread
* Water Resistant O-Ring
* Screw in-out design
222mm over all
188mm internal hole
207mm over all
155mm internal hole
Part Numbers : 4367 (White)
4369 (Grey)
Part Numbers : 4359 (Black)
4356 (White)
4” Inspection Port - Pressure Fit
6” Inspection Port with Bag
* Water Resistant O-Ring
* Pressure Fit
162mm over all
108mm internal hole
Part Number : 4371
5” Inspection Port - Pressure Fit
* Water Resistant O-Ring
* Screw in-out design
* Attached Canvas Bag
207mm over all
155mm internal hole
Part Number :
4356BAG
6.5” Inspection Port - Pressure Fit
* Water Resistant O-Ring
* Pressure Fit
* Water Resistant O-Ring
* Pressure Fit
187mm over all
133mm internal hole
222mm over all
188mm internal hole
Part Number : 4374
Part Number : 4377
261
H a t c h e s - Inspection Ports & Hatch Accessories
6” Inspection port - Black with Clear
Windtrap Ventilating Sail for Hatches
Deck Plate, bayonet screw design (no tools required to open).
For inspection of and general access to valves and deck vents.
Made of High impact ABS material.
The ‘Windtrap’ is aerodynamically designed to provide optimum
ventilation in your cabin, channelling the air down into the hatch.
It is made from strong nylon for durability and high resistance
against the strong winds. If
installed correctly, it will not
flutter and will prevent any
whistling and flapping noise.
Dimensions
Overall dia: 210mm
Internal dia: 156mm
Cut-out: 170mm
Part Number : 4359C
Handle for Top
Line 180 Hatch
The ‘Windtrap’ is packed in its
own storage bag.
Part Number : 11087
Nuova Rade
Part Numbers :
4666 (Cream)
4667 (Grey)
4668 (White)
Gas Support Struts
Stainless steel construction with
Bracket & Studs
Two lengths available:
Replacement Hatch Handle
Replacement Handle for
older style Nuova Rade
Hatches
Part Numbers :
4623W(White)
4623G (Grey)
Hatch Stay 200-370mm
Used for securing hatches partially or fully
open.
Marine grade stainless steel
Can be clamped tight in any position with
plastic knobbed bolt.
Adjusts from 200 to 370mm
Part Number : 62500-02
Hatch Stay 330-600mm
Suitable for securing hatches
partially or fully open.
Marine grade Stainless steel sliding tube
with brass plated mounting fittings.
Can be clamped tight in any
position with plastic knob.
Adjusts from 330 to 600mm
Part Number : 62507
262
116831 is 255mm long extended with
90mm stroke
116830 is 385mm extended with
155mm stroke
Part Numbers :
116830 (385mm long)
116831 (255mm long)
11630-BP (385mm long Blister Packed)
116831-BP (385mm long Blister Packed)
Lock Assembly for
Top Line Hatch
Part Number : 4670
Hatch Insect Screen
These fly net type screens are
used as a protection against all
kinds of insects, while the hatch
is open in order to ventilate the
cabin.
There are two sizes available; for
use with hatches with maximum
dimensions of either 540x540mm
or 650 x 650mm.
Part Numbers : 70983 (540 x 540mm hatch)
70984 (650 x 650mm hatch)
Hatches -
Portholes & Lenco Hatch Actuators
Porthole - Oval 128 x 400mm
Porthole - Oval 225 x 460mm
Oval shaped portlight for exterior use on boats. Full stainless steel
frame. Can not be opened.
Oval shaped portlight for exterior use on boats. Full stainless steel
frame. Can be hinged open from the inside and has a watertight
seal.
Dimensions:
128 x 400mm overall
Internal finishing frame depth = 13mm
Part Number : 13620
Dimensions:
225 x 460mm overall
Part Number : 13624
Lenco Hatch Lifters
To raise a hatch and keep it in position at the press of a button, Lenco Marine offers
its electric Hatch Lifters. Based on a ball screw design, Lenco’s hatch Lifts open and
close bulky hatches without slipping. The fast and powerful in-line motor delivers
up to 500 pounds (226.79kg) of thrust while only drawing around 5 amps. To raise or
lower a hatch, boaties simply use a rocker switch.
The Hatch Lifts are designed specifically to meet the demands of the marine
environment. They are construced entirely of non-corrosive materials and are
completely submersible, ensuring reliable performance. Unlike hydraulic models,
Lenco’s lifts install easily with a single power cable. An optional non-locking slide
bracket allows easy access to the mounting bracket should any problems arise
preventing operation of the lift.
Lenco Hatch Lifter - HL800S
LOA Retracted (cm): 53.34
LOA Extended (cm): 73.66
Stroke (cm): 20.32
12 Volt
Part Number : 5661
Lenco Hatch Lifter - HL1200S
LOA Retracted (cm): 63.50
LOA Extended (cm): 93.98
Stroke (cm): 30.48
12 Volt
Part Number : 5663
263
Hatches -
Lenco Hatch Actuators
Lenco Hatch Lifter - HL2400S
LOA Retracted (cm): 93.98
LOA Extended (cm): 154.94
Stroke (cm): 60.96
12 Volt
Part Number : 5669
Lenco Hatch Lifter - HL3000S
LOA Retracted (cm): 119.38
LOA Extended (cm): 195.58
Stroke (cm): 76.20
12 Volt
Part Number : 5673
Lenco Hatch Lifter - HL1600S/24V
LOA Retracted (cm): 73.66
LOA Extended (cm): 114.30
Stroke (cm): 40.64
24 Volt
Part Number : 5665-24
Lenco Hatch Lift Slide Bracket
The Lenco slide bracket for hatch lifters enables you to lift the hatch
manually to allow access to the mounting bolt and essentially the space
behind the hatch, should a power failure or electrical issue occur on board.
Part Number : 5658
264
Lights
267. Navigation
Lights for vessels
less than 12m
LED Navigation Lights - 12V
LED Navigation Lights
Navigation Lights - Side Mounted
LED Masthead Light
LED Stern Light
MaXtek LED Starboard Light
MaXtek LED Port Light
MaXtek LED Stern Light
Port Light
Starboard Light
Masthead Light
Stern Light
Port Light
Starboard Light
Port Light - Round
Starboard Light
Stern Light - Round
Stern Light - N12
Emergency Nav Light Set
Emergency White All Round Light
270. Navigation
Lights for vessels
less than 20m
Port Light - N20
Starboard Light N20
Stern Light - N20
Masthead Light N20
Bi-Colour Light N20
Tri-Colour & Anchor Light
Red Signal 360 degree Light
White Signal 360 degree Light
Port Light 12V LED
Starboard 12V LED
Port Light - 2NM
Starboard Light 2NM
Stern Light - 2NM
Masthead Light 3NM
Port 3NM LED
Starboard 3NM LED
Stern 3NM LED
Masthead 3NM LED
Stern Light 12V LED
272. Tri-Colour /
Anchor Lights
HELLA 2NM NaviLED TRIO TriColour Navigation Light
HELLA 2 NM Tri-Colour / Anchor
Navigation Light
Tri-Colour Combo Light
273. Pole Lights /
All Round Lights
All Round White Light S12
All Round Red Light S12
All Round Pole Light
LED All-Round Anchor Light - White
MaXtek LED All Round White Light
Fixed All-Round White Light
274. Pole Lights
and more...
MaXtek All Round LED White Light
Pole light base
Hella 8505 Masthead/Floodlight
Light
Lalizas Combo Masthead and Deck
Light
MaXtek LED Flush Mount Light
MaXtek LED Flush Mount Light
Round
LED Navigation Light - Deck
Mounted
275. Spot Lights
and other Exterior
Lights
Spotlight Mounted - 91 LEDs
Deck Light - 36 LEDs
PVC Spreader light
Flush Mount Waterproof LED Light
LED Deck Light
Deck Spot Floodlight - Adjustable
White Deck / Flood Light
Flush Mount Waterproof LED Light
with Stainless Steel Rim
276. Spot Lights
Marinco Wireless Remote
266
Spotlight 100W
Smart Spot Light with Wireless
Remote Control
Spot Light - Surface Mount 12V
60W
277. Handheld /
Work Lights
Hand Spot / Working Light
LED Torch
Portable Halogen Spotlight
Fluorescent Worklight 12V / 8W
Clip-on Caplight, LED
Rubber Spot Light
Utility Light Sea Power 12V / 10W
12V Energy Efficient Utility Light
Headlamp LED
278. LED Bulbs
G4 Origin LED Bulb with Side Pins
LED Bulb - MR16 10SMD
LED Bulb - MR11 6SMD
LED Bulb - 12V Bayonet
LED Bulb, Bayonet 15d
LED Bulb, Bayonet 15d
LED Bulb - 12V All Round
LED Bulb - 12V All Round - Offset
Pins
LED Bulb 12V - Cool White 1.5W Offset Pins
LED Bulb 12V - Cool White 1.5W Parallel Pins
LED Bulb 12V - cool white - 360°
LED Bulb - 12V All Round BA9S
LED Bulb - Festoon 39mm
LED Bulb - 12V
LED Bulb - 12V
LED Bulb - 12V
LED Switch Panel Lights
280. Interior Lights
LED
Lacquered Brass Reading Light
Flush Mount Ball Eye LED
Ball Eye LED Light
Oval LED “push on/off” light
LED Surface Mount “push on/off”
Aluminium LED Light - 60mm base
LED Mini Reading Light
Slim SS LED Dome Light - 16 LED
Slim SS LED Dome Light - 28 LED
Surface Mount LED Light
SS LED Dome Lights - 12 Volt
SS 5”LED Dome Light - 12 Volt
LED Dome Light
LED Dome Light , 91 LEDs - 24V
Euro LED Touch Lamp - Hella
LED Dome Light with Dimmer
LED Wireless Mini Dome Light
LED light - flush mount - Ø77mm
282. Chart Lights
& Courtesy Lights
Chrome Cabin Dome Light - LED
LED Light Rail - White
Flexible LED Chart Light
Lighter Socket with Chart Light
Courtesy Light Flush Mount - Black
LED Mini Courtesy Light
LED Courtesy Light
LED Chart Light
LED Courtesy Light
Round LED Lamp
Flush Mount Strip Light
283. Interior Lights
- Fluorescent
Fluorescent Light - UL Approved
Fluorescent Light - Single Tube
Fluorescent Light - Dual Tube
Fluorescent Light - UL Approved
LED Fluorescent Light - 32 LED’s
LED Fluorescent Light - 12 LED’s
284. Solar Lights
Sealite SL70 2-3nm Solar Marine
Light
Sealite SL60 2-3nm Solar Marine
Light
Sealite SL15 1-2nm Solar Marine
Light
Solar Powered LED Marker Light
Solar Dock Light
286. Underwater
Lights
Underwater Light - Surface
Mount LED
Waterproof High Intensity LED
Underwater Lights
Waterproof LED Strip Lights
L i g h t s - Navigation Lights for vessels less than 12m
LED Navigation Lights - 12V
LED Navigation Lights
Powerful Long Life LED
Navigation lights
Side Mounted
12V 5W Lights
Black or White Plastic Casing
Extremely low power
consumption
Sealed waterproof
housing sit on a rubber
mounting gasket.
UV resistant marine grade housing
200mm wire lead attached.
Dimensions: 90 (L) x 55 (W) x 35mm (H)
Sold as a Pair - Port and Starboard
Part Numbers :
00220-B (Black) 00220-W (White)
00220-B-BP (Black Blister)
00220-W-BP
(White Blister)
00220-SS (Stainless Steel Blister)
Supplied as a Port and
Starboard Pair
135 (L) x 60 (W) x 47mm (D)
Part Numbers :
3186
(Black Non LED)
3186BLED (Black LED)
3186WLED
(White LED)
3186BLED-BP
(Black LED Blister Packed)
3186WLED-BP
(White LED Blister Packed)
Navigation Lights - Side Mounted
Voltage 12V 5W Lights
Black UV resistant marine grade
housing.
Dimensions: 88.9 (L) x 57 (W) x 38mm (H)
Sold as a Pair - Port and Starboard
Part Numbers : 00221-B
LED Masthead Light
LED Stern Light
12 Volt , 0.5 watt
225º viewing angle
12 Volt , 0.5 watt
135º viewing angle
This navigation light has 9 x 5mm
Cool White LED bulbs inside the
casing for reliability and low power
consumption.
This navigation light has 9 x 5mm
Cool White LED bulbs inside the
casing for reliability and low power
consumption.
Dimensions: 75mm(height) x
65mm(width) x 56mm (depth)
Dimensions: 75mm(height) x
65mm(width) x 56mm (depth)
CE, RoHS and international rules
approved.
CE, RoHS and international rules
approved.
White or Black body colour options
White or Black body colour options
Part Numbers :
00131-WLD (White Body)
00131-LD (Black Body)
00131-LD-BP (Black Blister Packed)
Part Numbers :
00141-WLD (White Body)
00141-LD (Black Body)
267
L i g h t s - Navigation Lights for vessels less than 12m
MaXtek LED Starboard Light
MaXtek LED Port Light
12 Volt , 0.5 watt
112.5º viewing angle
12 Volt , 0.5 watt
112.5º viewing angle
This navigation light has 9 x 5mm Cool
Green LED bulbs inside the casing for
reliability and low power consumption.
This navigation light has 9 x 5mm Cool
Red LED bulbs inside the casing for
reliability and low power consumption.
Dimensions: 75mm(height) x
65mm(width) x 56mm (depth)
Dimensions: 75mm(height) x
65mm(width) x 56mm (depth)
CE, RoHS and international rules
approved.
CE, RoHS and international rules
approved.
White or Black body colour options
White or Black body colour options
Part Numbers :
00111-WLD (White Body)
00111-LD (Black Body)
00111-LD-BP (Black Body Blister Pack)
Part Numbers :
00121-WLD (White Body)
00121-LD (Black Body)
00121-LD-BP (Black Body Blister Pack)
MaXtek LED Stern Light
12 Volt , 0.5 watt
225º viewing angle
This navigation light has 9 x 5mm Cool White LED bulbs inside the casing for reliability and low
power consumption.
Dimensions: 75mm(height) x 65mm(width) x 56mm (depth)
CE, RoHS and international rules approved.
White or Black body colour options
Part Numbers :
00142 (Black Body)
00142-BP (Black Body Blister Pack)
Port Light
Starboard Light
75 (H) x 65 (W) x 57mm (D)
75 (H) x 65 (W) x 57mm (D)
Part Numbers :
00121-WH (White Body)
00121 (Black Body)
Part Numbers :
00111-Wh (White Body)
00111 (Black Body)
Masthead Light
60 (H) x 42 (W) x 34mm (D)
Part Numbers :
3174WB (White Body)
3174BB (Black Body)
268
Stern Light
60 (H) x 42 (W) x 34mm (D)
Part Number :
3178WB (White Body)
L i g h t s - Navigation Lights for vessels less than 12m
Port Light
60 (H) x 42 (W) x 34mm (D)
Part Numbers :
3170WB (White Body)
3170BB (Black Body)
Starboard Light
60 (H) x 42 (W) x 34mm (D)
Part Numbers :
3166WB (White Body)
3166BB (Black Body)
Port Light - Round
Starboard Light
65mm (dia) x 40mm (H)
65mm (dia) x 40mm (H)
Part Number :
30072 (White Body)
Part Numbers :
30071 (White Body)
30061 (Black Body)
Stern Light - Round
65mm (dia) x 40mm (H)
Part Numbers :
30073 (White Body)
30063 (Black Body)
Stern Light - N12
70 (H) x 60 (W) x 55mm (D)
Part Numbers :
30093 (Black Body)
Emergency Nav Light Set
Emergency White All Round Light
These emergency navigation lights are ideal for use on small crafts
and inflatable boats, or as emergency lighting in larger vessels.
They are waterproof and complete with brackets that are fastened
on the boat. They can be used when conventional lights are not
suitable for the vessel or when they are not operating. Emergency
nav lights are available with external light reflectors.
Requires D size battery
Approx 9 hours continuous use.
Dimensions: 130mm high x 54mm diameter.
Part Number : 30003
Requires D size battery
Approx 9 hours continuous use.
Set includes port,
starboard and a white all
round light.
Dimensions: 130mm high x
54mm diameter.
Part Number : 30010
269
L i g h t s - Navigation Lights for vessels less than 20m
Port Light - N20
Starboard Light N20
Lalizas
100 (h) x 105 (w) x 90mm (d)
Lalizas
100 (h) x 105 (w) x 90mm (d)
Part Numbers :
30512 (White Body)
30502 (Black Body)
Part Numbers :
30511 (White Body)
30501 (Black Body)
Stern Light - N20
Masthead Light N20
Lalizas
100 (h) x 105 (w) x 90mm (d)
Lalizas
100 (h) x 105 (w) x 90mm (d)
Part Numbers :
30513 (White Body)
30503 (Black Body)
Part Numbers :
30514 (White Body)
30504 (Black Body)
Bi-Colour Light N20
Lalizas
Port and Starboard as one
100 (h) x 105 (w) x 90mm (d)
Tri-Colour & Anchor Light
Lalizas
Port, Starboard, Stern and Anchor
195 (H) x 85 (W) x 85mm (D)
Part Numbers :
30515 (White Body)
30505 (Black Body)
Part Number :
30415 (Black Body)
Red Signal 360 degree Light
White Signal 360 degree Light
105mm (h) x 85mm x 85mm
105mm (h) x 85mm x 85mm
Lalizas Light - Approved for vessels
under 20m
Lalizas Light - Approved for vessels
under 20m
Part Number : 30522
Part Number : 30523
Port Light 12V LED
Starboard 12V LED
High Power 1.3W , 12V LED
112.5º, Distance 2NM
108(W) x 92(L) x 60mm(H)
High Power 1.3W , 12V LED
112.5º, Distance 2NM
108(W) x 92(L) x 60mm(H)
Part Number :
00292-LD (White Body)
Part Number :
00291-LD (White Body)
270
L i g h t s - Navigation Lights for vessels less than 20m
Port Light - 2NM
Starboard Light 2NM
Hella
108 (h) x 107 (w) x 90mm (d)
Hella
108 (h) x 107 (w) x 90mm (d)
Part Number :
2854W (White Body)
Part Number :
2853W (White Body)
Stern Light - 2NM
Hella
108 (h) x 107 (w) x 90mm (d)
Part Number :
2851W (White Body)
Port 3NM LED
Hella NaviLED Pro
Less than 2W , 9-33 Volt LED
IP67 Certified, Distance 3NM
90 (h) x 87 (w) x 57mm (d)
Part Number :
2LT959900-211 (White Body)
Masthead Light 3NM
Hella
108 (h) x 107 (w) x 90mm (d)
Part Number :
2850W (White Body)
Starboard 3NM LED
Hella NaviLED Pro
Less than 2W , 9-33 Volt LED
IP67 Certified, Distance 3NM
90 (h) x 87 (w) x 57mm (d)
Part Number :
2LT959908-211 (White Body)
Stern 3NM LED
Masthead 3NM LED
Hella NaviLED Pro
Less than 2W , 9-33 Volt LED
IP67 Certified, Distance 3NM
90 (h) x 87 (w) x 57mm (d)
Hella NaviLED Pro
Less than 2W , 9-33 Volt LED
IP67 Certified, Distance 3NM
90 (h) x 87 (w) x 57mm (d)
Part Number :
2LT959909-211 (White Body)
Part Number :
2LT959940-211 (White Body)
Stern Light 12V LED
Masthead 12V LED
High Power 3.36W , 12V LED
135º, Distance 2NM
108(W) x 92(L) x 60mm(H)
High Power 3.36W , 12V LED
225º, Distance 2NM
108(W) x 92(L) x 60mm(H)
Part Number :
00294-LD (White Body)
Part Number :
00293-LD (White Body)
271
L i g h t s - Tri-Colour / Anchor Lights
HELLA 2NM NaviLED TRIO Tri-Colour Navigation Light
LED Tri-Colour with Anchor navigation lamp.
Features:
*Ultra low current draw. Power saving on board. Port, Starboard and Stern draws less than 3.5W
*Fully sealed for life. IP 67 Certified.
*Safe and highly visible.
*Advanced heavy duty Grilamid® lens and housing, plus proven Hella marine LED technology.
*Unique installation and removal system.
*The NaviLED®Trio installs on a unique 316 stainless steel mounting shaft for a secure
attachment and reliable electrical connections.
Specifications:
Minimum Visible Distance: 2 Nautical Miles (Yacht)
Operating Voltage: Multivolt 8-28V DC
Power Consumption: Port, Starboard and Stern - Less than 3.5W combined All Round White /
Anchor - Less than 1.5W
Degree of Protection: IP 67
Part Number : 2LT980650-001
HELLA 2 NM Tri-Colour / Anchor Navigation Light
HELLA Tri-Colour lamp with an integrated All Round White / Anchor Lamp for attachment to yacht masts.
Features:
*Non-magnetic and saltwater resistant.
*The lamp housing features a bayonet lock for easy bulb change.
Specifications:
Minimum Visible Distance: 2 Nautical Mile
Bulb: 12V / 25W BAY15d included
Degree of Protection: IP 55
Part Number : 30416
Tri-Colour Combo Light
Features all around white, port and starboard lights
Made of UV stabilized ABS plastic, with shatter-proof acrylic lens, non magnetic stainless steel electrical
contacts and a nitrile water resistant seal to provide reliable long life.
Made in Europe
170(H) x 125(W) x 44mm
Part Number : 30429
272
L i g h t s - Pole Lights / All Round Lights
All Round White Light S12
All Round Red Light S12
Approved for vessels under 12 metres.
UV stabilized ABS plastic with shatterproof acrylic lens, stainless steel
electrical contacts and a nitrile water
resistant seal. 12V 10W bulb.
Approved for vessels under 12 metres.
UV stabilized ABS plastic with shatterproof acrylic lens, stainless steel
electrical contacts and a nitrile water
resistant seal. 12V 10W bulb.
Part Number : 30111
Part Number : 30113
All Round Pole Light
LED All-Round Anchor Light - White
All Round Pole Light ,
23cm long Folding
12 Volt, 1 Watt High Power LED
Housing Colour: White
Part Number : 30763
60mm x 30mm x 80mm (h)
Beam Angle: 140º
Colour Temp: Daylight White 45006000K
Part Number : 00130-LD
MaXtek LED All Round White Light
1 x 0.5W 12V High Power White LED
Water-Resistant
9-1/2” (240mm) high with adjustable mount
Working Voltage: 8-30 Volt DC
Wattage: 0.5W
Beam Angle: 120º
Colour Temp: Daylight White 4500-5500K
Now available in a Blister Pack
Part Numbers :
01126-LD
01126-LD-BP (Blister Packed)
Fixed All-Round White Light
S.S. Tube.
Height 9”. 12V 5W Bulb.
Part Number : 00115
273
L i g h t s - Pole Lights and more...
MaXtek All Round LED White Light
Pole light base
915mm pole - removable base
15° universal plug-in mount
1 x 0.5W High Power White LED
Water Resistant
Working Voltage: 8-30 Volt DC
To suit 00026-36 pole light
15º angle.
Part Number : 00125-S
Part Number : 00026-36
Hella 8505 Masthead/Floodlight
Light
Deck Floodlight and Masthead Lamp combined in one robust
housing.
Suitable for vessels less than 12m in length.
UV and impact resistant plastic housing
Bulb: 12V / 10W SV8.5 and 12V / 20W GX5.3 bulbs included
Degree of Protection: IP X4
Maximum Output: Deck
lamp 12V / 20W
Black or White Housing
Lalizas Combo Masthead and Deck
Light
Made of Plastic, For Sailboats & Power Boats Up To 12m.
12V 10W Masthead Bulb
12V 20W Halogen Lamp For Deck Light.
Part Number : 30499
Part Number : 30500
MaXtek LED Flush Mount Light
130mm x 83mm x 32mm (d)
Stainless Steel Finish
White 12V LED Bulb
12 volt , 0.54W
IP66 Waterproof
Part Numbers :
00300
00300-BP (Blister Packed)
LED Navigation Light - Deck Mounted
Voltage: 12 Volt DC
Wattage: 0.72 W
LED Lifetime: 50000hrs
Beam Angle: 120º
IP66 waterproof
100mm (l) x 80mm (w) x 45mm (h)
Part Number : 00154-LD
274
MaXtek LED Flush Mount Light
Round
3” Diameter
Stainless Steel Finish
Low power & long life LED
12 volt , 0.54W
IP66 Waterproof
Blister Packed
Part Number : 3182-LED
L i g h t s - Spot Lights and other Exterior Lights
Lalizas Spotlight Mounted - 91 LEDs
Deck Light - 36 LEDs
* 91 White LEDs
* Rubber Body
* Very Low power consumption
* Waterproof
* 36 Cool White LEDs
*12 Volt
*Rain and Splash Proof.
*U bracket and bolt on back for
mounting.
Part Numbers :
70678 (12 Volt)
70679 (24 Volt)
Part Number : 01613-WH
LED Deck Light
Deck Spot Floodlight - Adjustable
* 8 to 30 Volt
* Powerful all LED (6 x 3w LEDs)
* Waterproof IP66
* Alloy and stainless construction
* CE and ROHS certified
Waterproof rubber housing and
Stainless Steel Mounting hardware.
4” diameter lens
12 Volt, 35 Watt Halogen Beam
Part Number : 01609-WB
Part Number : 00806-WH
PVC Spreader light
White Deck / Flood Light
Stainless Steel & PVC Construction
Designed for illuminating the deck of a
boat from the mast and spreaders.
12V 70W
7”(W) X 4.5”(H)
ABS Housing
Adjustable S.S. Bracket
12V , 35W Halogen Beam
122mm (dia) x 150mm (l)
Part Number : 00802-12
Part Number : 00805-WH
Flush Mount Waterproof LED Light
Includes spacer so that it could also be surface mounted.
12 Volt DC , 0.22W
Part Numbers :
00158-WH (White)
00158-RD (Red)
Flush Mount Waterproof LED Light
with Stainless Steel Rim
86(L) x 31(W) x 9mm(H)
12 Volt DC , 0.21W
Part Numbers :
00159-SSWH (with White LEDs)
00159-SSBU (with Blue LEDs)
275
L i g h t s - Spot Lights
Marinco Wireless Remote Spotlight 100W
Marinco Wireless Remote Spotlight - Suitable for Marine and Vehicle
Wireless Remote Control Spot Light with fully wireless remote. Can be hardwired if required.
The universal mounting system even allows it to be mounted upside-down. Comes complete
with a wireless dash mount remote as standard. Light can be hardwired to the optional dash
mount control and a hand held wireless controller is also available as option extras (available
separately).
*5 Year limited warranty
Part Numbers :
SPL-12B (Black 12V)
SPL-12C (Chrome 12V)
SPL-12W (White 12V)
SPL-24B (Black 24V)
SPL-24W (White 24V)
Optional Wired Bridge remote
Available Pt No: SPRL-3
Smart Spot Light with Wireless Remote Control
Direct the powerful beam through a full 420º rotation and 120º of vertical sweep by
using the simple to use wireless remote.
* 12V lamp, 55W Halogen Bulb - H3
* RF range - 75m
* Waterproof to IP66 + UV and Salt water resistant
* Comes with wiring loom and deutch style connector plugs
* CE approved
* TWO YEAR warranty (excludes lamp)
Part Numbers :
01656-WH (Side Out Cable)
01656-WH-SP (Down Out Cable)
Spot Light - Surface Mount 12V 60W
This powerful forward looking Spotlight features an adjustable bracket allowing you to
orientate the light through 180º arc vertically. Light can be mounted on any flat surface
so can be used to look forward horizontally or any vertical plane.
* 12 Volt Lamp - Sealed beam 60W
* 2 brightness settings, i.e can work as a deck light or spot light.
Dimensions: 180mm x 120mm Housing.
165mm x 45mm Surface Mount Base..
Wiring:
Brown as negative, Blue is high beam + , Yellow is low beam + .
Part Number : 01607-WB
276
L i g h t s - Handheld / Work Lights
Hand Spot / Working Light
LED Torch
12V / 55W Halogen Bulb
Plastic Casing
12 ft Cord.
Button turns on/off and selects either 24
LEDs on one side, or 3 LEDs on the end.
Part Number : 01686
Magnet and fold-out hook on back, allows
for when you need your hands free.
Dimensions: 98 x 63 x 33mm
Part Number : LEDTORCH
Portable Halogen Spotlight
Utility Light Sea Power 12V / 10W
12 Volt, 5A, 100W halogen bulb
127mm wide lens.
12 Volt ,10W bulb, a reflector and a
hook.
* Rugged impact resistant ABS plastic
housing.
* On/Off switch on the handle for onehanded operation.
* Coiled cable can be extended up to
2.8m
* Universal cigarette lighter plug.
The Utility Light ‘Sea Power’
is made of highly resistant
polypropylene and has a 4m cable
with a cigarette lighter plug.
Part Number : 31312
Part Number : 31309
Headlamp LED
Bulb type: 8 LED
Batteries: 3 x AAA
Three working modes:
2LED / 4LED / 8LED / OFF
IP44 - Splashproof
Diameter: 68mm
Size: 30x77mm
Weight: 95.3gr
* CE Rated
Part Number : 31371
12V Energy Efficient
Utility Light
This water proof light can be
suspended to provide light for
entertainment, chart reading,
working or use as a courtesy light.
* Has automatic switch on at dusk /
off at dawn.
* 2 Bulbs: a High-Efficiency 0.1A bulb with visibility 2NM and a
0.24A Bright bulb.
* 2 Function lens: Fresnel lens for visibility 2NM and clear
bottom for area lighting.
* Comes with 15’ cord & cigarette lighter plug.
Part Number : 01644
277
L i g h t s - LED Bulbs
G4 Origin LED Bulb with Side Pins
LED Bulb - MR16 10SMD
8-30 Volt - Warm white
Resistant to voltage
fluctuations common on
boats and motorhomes.
Fittings : 2 x 10mm side pins
25mm (overall dia)
1.2 watts
Brightness: 60 Lumens
Equivalent to: 6 W halogen
Part Number : LED-G4
LED Bulb - 12V Bayonet
19 Cool White LEDs per bulb
12 Volt
Part Numbers :
02166 - (Offset Pins
Dual contacts on base)
02167 - (Parallel Pins
Single contacts on base)
LED Bulb, Bayonet 15d
12 Cool White LEDs per bulb
12 Volt , 1 W
Two contacts on the bottom with
parallel pegs on each side.
Dimensions:
48 (l) x 26 (w) x Depth 18mm
Part Number : 00163-WH
Warm White
10-30 Volt DC
49mm Diameter
RoHS & CE Approved
Part Number :
LED-MR16
LED Bulb - MR11 6SMD
Resistant to voltage
fluctuations common on
boats and motorhomes.
Warm White
10-30 Volt DC
34mm Diameter
RoHS & CE Approved
Part Number :
LED-MR11
LED Bulb, Bayonet 15d
9 Cool White LEDs per bulb
12 Volt , 0.7 W
Two contacts on the bottom with
parallel pegs on each side.
Dimensions: 30 x 18mm
Part Number : 00063-WH
LED Bulb - 12V All Round
LED Bulb - 12V All Round - Offset Pins
18 Cool White LEDs per “bulb”
Parallel Pins
Single contact on base
36 Cool White LEDs per “bulb”
Offset Pins
Dual contacts on base
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Works with some pole lights to convert
from standard bulb to LED
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Works with some pole lights to convert from
standard bulb to LED
Part Number : 71228
Part Number : 71230
278
L i g h t s - LED Bulbs
LED Bulb 12V - Cool White 1.5W Offset Pins
LED Bulb 12V - Cool White 1.5W Parallel Pins
LED Bulb 12V - Cool White 1.5W - Offset
Pins
LED Bulb 12V - Cool White 1.5W Parallel Pins
Dual Contact, 90LM
Dual Contact, 90LM
Dimensions: 24mm diameter x 40mm high
Dimensions: 24mm diameter x 40mm high
Part Number : 01169-WH/1
Part Number : 01169-WH
LED Bulb 12V - cool white - 360°
LED Bulb - 12V All Round BA9S
LED Bulb 12V - cool white - 360° -bayonet
parallel pins
4 Cool White LEDs per “bulb”
Parallel Pins
Single contact on base
15d (DUAL contact) 13 LEDs
Dimensions: 18mm diameter x 42mm high
Part Number : 01167-WH
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Works with some pole lights to convert from
standard bulb to LED
Part Number : 71233
LED Bulb - Festoon 39mm
LED Bulb - 12V
4 cool white LEDs on each side (total 8 leds
per bulb) creates a 360 º light.
6 High Power Cool White LEDs per “bulb”
12V , ~0.5A
42mm Festoon
Light Voltage Range DC 10.5V-15.8V
Low heat output, low power consumption
Part Number : LD00010-WH
Part Number : 71227
LED Bulb - 12V
LED Bulb - 12V
2 High Power Cool White LEDs per “bulb”
12V , ~0.5A
42mm Festoon
6 Cool White LEDs on each “bulb”
42mm Festoon
Part Number : LD00008-WH
Part Number : 02165
LED Bulb - 12V
LED Switch Panel Lights
2 Cool White LEDs per “bulb”
42mm Festoon
Wide angle of 160°
Part Numbers :
31386 - LED Bulb, green,
multi use 10-28V DC
Part Number : LD00020
31387 - LED Bulb, red,
multi use 10-28V DC
279
L i g h t s - Interior Lights LED
Lacquered Brass
Reading Light
Brass LED Reading Light with
Frosted Glass
12V LED Bulb
1-1/2” x 4-1/2”H
On/Off Switch
Lamp Can Be Rotated
Voltage: 8-30 VDC
LED type: 1 x 3w warm white
Part Number : 00922-BLD
Dimension: 65mm (base diameter) x 153mm
(tall when straight out)
Effective Lumen: 140LM
Flush Mount Ball Eye LED
Part Number : 00926-BLD
Made of chromed plastic.
1W High Power White LED
9-30 Volt DC
LED Mini Reading Light
115mm x 70mm
(requires 35mm behind)
Voltage: 8-30 VDC
LED type: 1 x 3w warm white
Part Number : 01190-WH
Dimension: 54mm (base diameter) x
112mm (tall when straight out)
Effective Lumen: 140LM
Ball Eye LED Light
Zinc Alloy with PC Lens,
1 x 1W White LED, 12V
Swivel lens
78mm OD
Beam Angle: 110°
Warm White 2850-3200K
Part Number : 00230-WH
Oval LED “push on/off” light
12 Volt
Flush or Surface Mount
Press to turn ON/OFF
8 white LEDS
119mm x 100mm
Part Numbers :
00821-BL (Brass)
00821-SS (Stainless Steel)
LED Recess Light - Warm White
12 Volt
Available with a built-in switch or as a
standard flush light. 9 X 0.2 watt LED
bulbs producing a warm white light.
Dimensions: 76mm Overall Diameter
Requires 20mm recess into panel
Part Numbers :
00149-CPD (with switch)
00149-WSCPD(without switch)
Part Number : 00065-WHD
LED Surface Mount “push on/off”
Slim SS LED Dome Light - 16 or 28 LEDs
12 Volt DC , 1.15W
16 White LEDs
Press to turn ON/OFF
Dia: 110mm
28 or 16 White Top LEDs
Dia: 132mm,
Thickness: 11mm
Beam Angle: 30°
Daylight White 6000K
Part Number : 00165-WH
280
12 Volt DC , 2.26W
Beam Angle: 120°
Daylight White 6000K
Part Numbers :
00601-WH - 16 LEDs
00602-WH - 28 LEDs
L i g h t s - Interior Lights LED
SS LED Dome Lights - 12 Volt
Euro LED Touch Lamp - Hella
Classic look with a modern twist.
Marine Grade Stainless Steel
On / Off switch
Multivolt 9 - 33 Volt DC,
Less than 4W
LED Q’TY: 5mm x 20
LED Life Time: 50000hrs
Beam Angle: 120°
Cool White
CE & RoHS Approved
Touch Sensitive Switching
Touch the white pad to turn the
lamp ON, the black pad to turn
the lamp OFF.
Waterproof, impact and shock resistant for an ultra long
service life.
Part Numbers :
00532-SLD (3” Dome Light, 1.35Watt , 111mm OD)
Part Number : 2JA959950-521
00532-BRASS
(3” Dome Light, 1.35Watt , 111mm OD - Brass)
00541-SLD (4” Dome Light, 1.7Watt , 140mm OD)
00550-SLD (5” Dome Light, 1.7Watt , 168mm OD)
00532-SLD-BP (3” Dome Light, 1.35Watt , 111mm OD Blister)
Touch sensitive switching and dimming technology. Hold your
finger on the pad for more than two seconds to cycle through
four dimming levels.
Includes red light setting for
New model with Warm LED light.
night travelling.
On / Off switch
8-30 DC Volt,
Powerful 3W High Power
LED Q’TY: 1 x 3W Warm White LED
White LED
LED Life Time: 50000hrs
+ 10 x 0.5W Red LEDs
Beam Angle: 110°
128mm diameter x 25mm
Warm White
CE & RoHS Approved
Part Number : 00600-WS
Part Number : 00554-WH
LED Dome Light with Dimmer
SS 5”LED Dome Light - 12 Volt
Surface Mount LED Light
LED Dome Light
8-30 DC Volt,
Powerful 3W High Power
White LED
12 Volt DC , 0.22W
3 x white LEDs
Toggle switch
Round - Dia: 90mm
128mm diameter x 25mm
Beam Angle: 30°
Daylight White 6300K
Part Number : 00600
Part Number : 00168-WH
LED light - flush mount - Ø77mm
LED Dome Light , 91 LEDs - 24V
* 91 White LEDs
* 24 Volt
* ON / OFF / DOOR Switch
* Low power consumption
* Long life-cycle
Designed for flush mounting but includes packer which can be
used for surface mounting.
Rim Made of Plastic with an
Aluminium Chassis
Chrome Surround
Waterproof, shockproof,
vibration proof, rustproof
1 x 3W LED Warm White
Voltage: 8-30 Volt DC
Beam Angle: 110°
Warm White 2900-3200K
CE & RoHS Certified
143 (diameter) x 38mm
Part Number : 00158-WH3W
Part Number : 70676
281
L i g h t s - Chart Lights & Courtesy Lights
Chrome Cabin Dome Light - LED
On/Off Switch on the side and low power consumption.
Base Diameter: 100mm
Height: 30mm
Part Number : 00520-CPD
LED Chart Light
8-30 Volt DC
Aluminium, with Warm White LED light.
Touch Sensor Switch all around the housing.
Light Housing Dia: 40mm
Base Dia: 50mm
Length: 490mm
Part Number : 00321-WH
LED Light Rail - White
12 Volt , 0.3W
Plastic, 4 x White LEDs
Tube can rotate 180°
173 (l) x 30 (w) x 30mm (h)
Beam Angle: 40º
Colout Temp: Daylight White 17671K
Part Number : 00171-LED
LED Courtesy Light
1 x 5mm White LED
45mm x 32mm
Chrome Plates Plastic, Partly recessed light fitting
Part Number : 00189-LED
Flexible LED Chart Light
1 x White LED
Aluminium tube 420mm.
Cigarette lighter style Plug with switch
Part Number : 00228-WH
Flush Mount Strip Light
Lighter Socket with Chart Light
Cigarette lighter style socket with Chart Light.
Part Number : 3119
282
140mm x 28mm
6 x White LED bulbs
12 Volt DC , 0.43W
Beam Angle: 30°
Daylight White 6000K
Part Number : 00183-LED
L i g h t s - Interior Lights - Fluorescent & LED
Fluorescent Light - Single Tube
Fluorescent Light - Dual Tube
1 x 8w Tube
12 Volt
White Plastic
410mm (L) x 65mm (W) x 35mm (H)
2 x 8w Tubes
12 Volt
White Plastic
410mm (L) x 95mm (W) x 35mm (H)
Part Number : 01811
Part Number : 01812
LED Fluorescent Light - 32 x 0.5W LED
LED Fluorescent Light 12 x 0.4w LED
Exceptionally bright will illuminate larger cabins. A great
replacement for traditional fluorescent type fittings.
Has a switch so can be turned on and off.
Our biggest selling fluorescent type LED lamp. A great economical
replacement for smaller fluorescent type lights in cabin and saloon.
Complete with On - Off switch.
32 x 0.5W LED
LED Lifetime: 50000hrs
Beam Angle: 140º
Colour Temperature: 2850-3200K
Effective Lumen: 430LM
Effective Wattage: 6.4W
Voltage: 10-30 Volt DC
Material: ABS, ABS Shade
LED Type: SMD Warm White LED
LED’s - 12 x 0.4w
LED Lifetime: 50000hrs
Color Temperature: 2700-3200K
Effective Lumen: 142LM
Voltage:12-24 Volt DC
Splashproof
Dimensions: 330 x 70mm
Part Number : 01803
Dimensions: 401 x 78mm
Part Number : 01804-S
283
L i g h t s - Solar Lights
Sealite SL70 2-3nm Solar Marine Light
The Sealite SL70 2-3 mile compact LED light is the most advanced and versatile compact
light on the market. The dual solar module unit is designed for low-medium sunlight
conditions and has proven it’s reliability in regions such as Britain, Belgium and North
America. Users are continually pleased at the ease of battery replacement.
Features:
* Dual high-performance solar modules for reliable operation in low sunlight conditions
* 6 ultra-high intensity LEDs
* 8Ah NiMH battery pack
* 256 IALA flash patterns, user-adjustable without the need for external devices
* Bird-deterrent spike
Advantages:
* Award-winning lens design
* User-replaceable battery in sealed battery compartment
* IP68 waterproof
* Product life expectancy of up to 12 years
Available in 5 colours: Red, Green, White, Yellow, Blue
Part Number : SL70
Sealite SL60 2-3nm Solar Marine Light
The Sealite SL60 2-3 mile solar-powered LED light is maintenance-free and has a service life
of over 5 years, extended through easy battery replacement. The unit is ideal for navigation,
hazard lighting, aquaculture, perimeter lighting and a range of other applications.
It can be installed in minutes and requires no operator intervention. The flash-characteristics
are easily adjusted on-site by the user and the lantern has a permanent ON/OFF switch for
easy storage.
Features:
* 256 IALA flash patterns, user-adjustable without the need for external devices
* 6 ultra-high intensity LED’s
* User-replaceable battery in sealed battery compartment
* 4 user adjustable intensity settings
* ON/OFF storage switch
* Bird deterrent spike
Advantages:
* Installs in minutes and operates maintenance-free for up to 5 years
* IP68 waterproof
* Product life expectancy of up to 12 years
Available in 5 colours : Red, Green, White, Yellow, Blue
Options available with SL60
50mm adaptor plate or 200mm OD base
Part Number : SL60
284
L i g h t s - Solar Lights
Sealite SL15 1-2nm Solar Marine Light
The SL15 1-2 mile compact LED light is exceptional value and incorporates some of the most
advanced technology available.
In the tradition of Sealite lanterns, the SL15 is designed to be maintenance-free and have
a service life of over 5 years. This makes the unit ideal for hazard marking, aquaculture,
navigation, perimeter lighting and a range of other applications.
During daylight hours, the solar module will charge the battery and the lantern will automatically
begin operation at dusk - once the ambient light threshold drops sufficiently.
Features:
* 15 IALA recommended flash settings including steady-on (custom characteristics available on
request)
* 4 ultra-high intensity LEDs
* User-replaceable battery in sealed battery compartment
* Large 0.45watt internal solar module
* Bird-deterrent spike
Advantages:
* Completely sealed and self-contained using ultrasonic welding techniques
* Installs in minutes and operates maintenance free for up to five years
* IP68 waterproof
* Product life expectancy of up to 12 years
Available in 5 colours: Red, Green, White, Yellow and Blue
Flash set at .3 second on, 2.7 seconds off.
Part Number : SL15
Solar Powered LED Marker Light
Solar Powered LED Marker Lights provide night illumination to buoys, aquaculture, docks, moorings,
or anything else benefiting from night time identification. LED warning lights charge in the sunlight
and automatically switch on at dusk alerting boaties of hazards. Units are constructed with clear
lens and tough, waterproof, plastic housing to keep light in working repair.
Features:
*One (1) nautical mile visibility
*White LED light
*Three operating modes: steady on, slow flash (15x / minute), & fast flash (60x / minute)
*Attaches easily to any flat surface with 2 (two) 1/4” screws
*Base diameter is 120mm
Part Number: LED-1030
Solar Dock Light
Solar Dock Light illuminates with 360º bright 4 white LED light.
The dock light can be mounted to any flat surface.
Part Number : LED-1034
285
L i g h t s - Underwater Lights
Underwater Light - Surface Mount LED
Made of Stainless Steel 316,
with 4 x 3W LEDs either Blue or Green
( 00299-BG has 2 x 3W Blue LEDs & 2 x 3W Green LEDs)
1.5M Wires, 95mm(Dia.), 20mm (Thickness).
Operating Voltage: 8-30 Volt DC
Beam Angle: 110º
Quick and Simple to Fit, Should be placed on the transom at the
lowest possible location about 3” above the bottom of the boat,
make sure the inside of the transom is clear.
Part Number :
00299-B ( 4 x Blue LED Bulbs )
Waterproof High Intensity LED Underwater Lights
These High-Intensity LED Underwater Lights are totally waterproof and designed to be used above or below the water line.
A broad flood light effect is created by the engineered optics of the convex light face. Compared to other LED models on the
market, this 180 Lumen light has greater light output and a wider aperture.
* Surface Mount or Small Hole for Wiring
* 6 Super Bright LED’s (180 Lumens)
* 100,000 hour life
* No high heat like most other underwater lights
* Can be used on Trim-Tabs
* Stainless Steel hardware Included
Dimensions:
Surface size: 90mm (l) x 38mm (w) x 30mm (h)
Part Numbers :
LED-1000 (Submersible White LED Light)
LED-1002 (Submersible Blue LED Light)
Waterproof LED Strip Lights
These surface mount LED Utility Strip Lights are great for lighting
or decorating interior and exterior of boats, RVs and other vehicles.
Being 100% waterproof, they can be used virtually anywhere.
*Submersible - 100% waterproof
*Circuit board completely sealed in epoxy to resist water, corrosion
and vibration
*Surface Mounting for Easy Installation
*Low Amp Draw For Longer Battery Life
*Clear Lens Provides Maximum Light
*Three Lengths (4”, 6”, and 8”) cover any application
Part Numbers :
LED-1020 (Slimline Submersible Strip 6 x LED Light)
LED-1022 (Slimline Submersible Strip 12 x LED Light)
286
Pumps & Plumbing
289. Maxflo
Pressure Pumps
Pressure Pump - 35PSI - 13 L/Min
Pressure Pump - 40PSI - 17 L/Min
Pressure Pump - 60PSI - 20 L/Min
Pressure Pump - 40PSI - 17 L/Min
- 220V AC
Pressure Pump with Accumulator
290. Other Pumps
Shurflo Water Pressure Pump 13L/
min
Shurflo Water Pressure Pump
11.3L/min
Shurflo Water Pressure Pump 6L/
min
Portable 12V Washdown Pump
TMC Water Circulation Pump- 25
L/min
TMC Bronze Impeller Circulation
Pump- 25 L/min
Wash Down Coil Hose Kit
292. Electric Bilge
Pumps
AML Bilge Pump - 3000 gph
AML Bilge Pump - 2000 gph
AML Bilge Pump - 1500 gph
AML Bilge Pump - 1000 gph
AML Bilge Pump - 500 gph
Battery Aquapump
TMC Bilge Pump - 3000 gph
TMC Bilge Pump - 2000 gph
TMC Bilge Pump - 1000 gph
TMC Bilge Pump - 1000 gph
TMC Bilge Pump - 500 gph
TMC Handy Pump - 1000GPH
TMC Auto Bilge Pump - 1500 gph
TMC Auto Bilge Pump - 500 gph
Lalizas Bilge Pump - 1000 gph
Lalizas Bilge Pump - 700 gph
Lalizas Bilge Pump - 600 gph
Lalizas Bilge Pump - 500 gph
Lalizas Auto Bilge Pump - 600 gph
MaXtek Bilge Pump Switch
Sure Bail Float Switch
Automatic Float Switch - Lalizas
295. Manual Bilge
Pumps & Bailers
Plastimo Manual Bilge Pump 925
Bailer - 2.5 litre, Orange
Bailer - 2.0 litre Flexible
288
Bailer - Flexible
Collapsible Fabric Bucket
Hand Bilge Pump 15GPM (57LPM)
Hand Pump - 12GPM (45LPM)
Hand Bilge Pump 12GPM (45LPM)
Hand Pump 25GPM - Under Deck
Manual Hand Bilge Pump
296. Toilets
TMC Electric Toilet Superior
TMC Deluxe Electric Toilet
TMC Electric Toilet 12v - Standard
TMC Manual Toilet - New Euro
Model
MaXtek Portable Chemical Toilet
MaXtek Waste Tank for Portable
Toilet
MaXtek Camping Toilet Frame
Porta Pottie Excellence - White
Porta Pottie Qube 365 - Ruby
298. Toilet Parts
TMC Toilet Electric Flush Control
TMC Manual Euro Toilet Pump
TMC Toilet Pump
Razor Kit for TMC Electric Toilets
TMC Toilet Seat Standard - with
Hinges
TMC Repair Kit for Manual Toilets
TMC Toilet Waste Pump
In-Line Macerator Pumps
TMC Toilet Part No.6 Seat Hinge
Support
TMC Toilet Part No.12 Joint
Packing
TMC Toilet Part No.15 Elbow
TMC Toilet Part No.18 Centrifugal
Impeller
TMC Toilet Part No.19 Macerator
Housing
TMC Toilet Part No.20 & 20-1
Chopper Blade Set
TMC Toilet Part No.21 Gasket
TMC Toilet Part No.22 Base
TMC Toilet Part No.23 Flapper
Valve
TMC Toilet Part No.24 Discharge
Port
TMC Toilet Part No.25 Adaptor
TMC Toilet Part No.27 Body (Pump)
TMC Toilet Part No.28 Gasket
TMC Toilet Part No.29 - Impeller
Flexible
TMC Toilet Part No.44 Base
Packing Gasket
TMC Toilet Part No.64 Elbow
300. Valves & Pipe
Fittings
Electronic Aquavalve - 3 way Valve
Aquavalve - 3 way Y Valve
Aquavalve Hosetails
3 Way Y Valve
Ball Valves
Aquavalve Elbows - 120 or 90
degree
Non Return Valve
Non Return valve
Nylon Non Return Valve
301. Skin Fittings ,
Hosetails ,
T-Pieces
Skin Fittings - Hose Tails
Skin fitting with 90 degree elbow
Male Hose Tails
Hose Tail Elbow
Hose Tail
T-Piece
Skin Fittings - Mushroom
Skin Fitting - Hosetail
Female T-Piece
Bronze Tailpieces / Elbow Hosetails
302. Tru Design
Fittings
Tru Design Ball Valves
Tru Design Hose Tail Elbows
Tru Design Hose Tails with Long
Thread
Tru Design Female Thread Elbows
with Hose Tails
Tru Design Male Thread Elbows
with Hose Tails
Tru Design Hose Connectors
Tru Design Hose Reducers
Tru Design Y Pieces
Tru Design Skin Fittings - Full
Thread
Tru Design Skin Fittings - Hose Tail
Tru Design Skin Fittings - Recessed
Tru Design Vented Loops
306. Pipe Fittings
Elbows - Female to Female
Nipples
Reducing Bushes
Elbows - Male to Female
Reducing Nipples
Sockets
Plugs
Vented Loop 25mm Stainless Steel
307. Water
Strainers
Salt Water Strainer
In-line Strainer - 3/4” Hose Tail
In-line Strainer - 1/2” Hose Tail
Bronze Intake Strainer - Oval
Cooling Water Strainer
In-line Strainer - 15mm Thread
Scoop Strainers: Plastic & Bronze
Bronze Intake Strainer - Removable
308. Shower
Components
Shower Kits
Water Accumulator
Shower Box with Cap
Side-mount Housing with Door
Outside Shower Unit
Shower Sump System LSU600
Shower Mixer
Small Shower Box with Mixer
Shower Box with Cap - Round
Shower Nozzle with Hose
Shower Nozzles
Toilet Roll Holder
Cockpit Drain with grill
Drain Sleeve
Solar Shower
Shower Nozzle Holder
Wall Attachment for Shower
Cockpit Drain 90 Degree Elbow
Outboard Well Drains
310. Heaters &
Water Tanks
Eberspacher Airtronic D2 Diesel
Heater
Eberspacher Airtronic D4 Diesel
Heater
Eberspacher Hydronic D5WSC
Water Heater
Force 10 Water Heaters
LALIZAS Water Tanks
Water Tank - Folds Flat - 19 litre
Motorhome Waste dump kits
WAM Female Pipeline Camlock
with Hose Tail
WAM Male Pipeline Camlock
Compact RV Washing Machine
P l u m b i n g - MaXflo Pressure Pumps
These new generation pumps guarantee quiet operation and
smooth performance while providing the ultimate in durability
and reliability.
Designed and built specifically for the harsh marine environment but are suitable for a
multitude of applications.
* Motorhome and Boat water systems with showers and galley outlets
* Powerful Deck and Wash-down systems
* Designed for both Fresh Water and Salt water Applications.
* 2 Year Warranty
Pressure Pump - 35PSI - 13 L/Min
Pressure Pump - 40PSI - 17 L/Min
Designed for Fresh Water
and Salt water Applications.
Automatic Start/Stop when
taps are turned on and off.
Designed for Fresh Water and Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
Specifications:
Max Pressure - 35psi
Open Flow Rate - 13 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
Self priming height - 3m
Water strainer - Included
Dimensions: (L) 200mm x (W) 100mm
(WOA) Including filter & hosetail connections: 185mm
Part Numbers : NS35 (12V)
NS36 (24V)
Specifications:
Max Pressure - 40psi
Open Flow Rate - 17 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
Self priming height - 3m
Water strainer - Included
Dimensions: (L) 247mm x (W) 100mm
(WOA) Including filter & hosetail connections: 185mm
Part Numbers : NS40 (12V)
NS42 (24V)
Pressure Pump - 60PSI - 20 L/Min
Designed for both Fresh Water & Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
2 Year Warranty
Specifications
Voltage: 12 Volt
Current: 17A
Pressure:60psi
Flow: 20L.Min
Overload Protection - Thermal Cut-out
Inlet Outlet Dia - 1/2” (12mm)
Self priming height - 3m
Run dry without damage
Duty Cycle: Intermittent (Under different pressure, the continuously working time will also be different)
Fluid temperature: 95C
Water strainer - Included
Weight - 2.8kg
Dimensions: (L) 260mm x (W) 150mm
Part Number : NS44
289
P l u m b i n g - Pressure Pumps
Pressure Pump - 40PSI - 17 L/Min 220V AC
Designed for Fresh Water and Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
Specifications:
Max Pressure - 40psi
Open Flow Rate - 17 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
Self priming height - 3m
Voltage: 230 Volt AC
Water strainer - Included
Part Number : NS43
Pressure Pump with Accumulator
May be mounted vertically
or horizontally for easy
installation.
12 Volts DC
Self-priming up to 6ft (2m).
Overall Dimensions: 500 x 350 X 385mm(h)
Accumulator tank volume: 2.1 gallon (8.0 litre).
Max Pressure - 35psi Open Flow Rate - 13 l/Min
Water strainer - Included
Part Number : NS35KIT
Designed for Fresh Water and Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
Designed for all applications. 3 Chamber Pump. 1 Year Warranty.
Specifications:
Built-in pressure switch
Max Pressure - 45psi
Open Flow Rate - 13 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
12V
Part Number : 6662
Dimensions: (L) 290mm x (W)
100mm
(WOA) Including filter & hosetail connections: 185mm
FDA materials in pump and
accumulator tank for fresh
drinking water.
Shurflo Water Pressure Pump 13L/min
Shurflo Water Pressure Pump 11.3L/min
Designed for Fresh Water and Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
Designed for all applications. 3 Chamber Pump. 1 Year Warranty.
Specifications:
Built-in pressure switch
Max Pressure - 45psi
Open Flow Rate - 11.3 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
12V
Part Number : 6665
Shurflo Water Pressure Pump 6L/min
Designed for Fresh Water and Salt water Applications.
Automatic Start/Stop when taps are turned on and off.
Designed for all applications. 3 Chamber Pump. 1 Year Warranty.
Specifications:
Built-in pressure switch
Max Pressure - 30psi
Open Flow Rate - 6 l/Min
Thermal Cut-out
Inlet /Outlet:1/2” (12mm)
12V
Part Number : 6664
Portable 12V Washdown Pump
The pack includes:
12 Volt Pump unit with inlet hose and power supply lead, Adjustable spray gun,
Delivery hose. All this in a rugged carry case weighing only 6kg.
Part Number : NS100
290
P l u m b i n g - Pumps
TMC Water Circulation Pump- 25 L/min
Heavy duty, continuously rated impeller pump suitable for high volume
salt and fresh water transfers.
Flow: 25 L/Min - 400 GPH (1512 LPH)
Inlet and outlet size: 1” / 25mm hose tails
Voltage:12V
Current Draw: 8Amps
Head: 4m
Priming head(Lift): 1.5m
Rating: Continuous
Dimensions:
98(h) x 128(w) x 172(d)
Part Number : 6666
TMC Bronze Impeller Circulation Pump- 25 L/min
Heavy duty, continuously rated bronze housed impeller pump suitable for
high volume salt and fresh water transfers.
Flow: 25 L/Min - 400 GPH (1512 LPH)
Inlet and outlet size: 13mm female thread and 19mm male thread
Voltage:12V or 24V
Current Draw: 8Amps
Head: 4m
Priming head(Lift): 1.5m
Rating: Continuous
Dimensions:
98(h) x 130(w) x 170(d)
Part Numbers :
6667 - 24V
6668 - 12V
Wash Down Coil Hose Kit
25ft coiled hose with snap on plastic garden type hose fittings and adjustable spray nozzle.
Spray Nozzle is easily adjustable with settings such as soak, shower, jet, Cone and Mist.
* Self-coiling design is easy to use, extremely flexible, lightweight, and compact.
* The hose retains and memory of its coiled shape which makes it easy to stow.
* Constructed of UV resistant polyurethane that is far more durable than standard rubber
and PVC hoses.
* Will not kink or tangle.
* Drinking water safe.
Part Number : NS60
291
P l u m b i n g - Absolute Marine Electric Bilge Pumps
Absolute Marine Bilge Pumps
These pumps are CE rated and manufactured to ISO 9001 standard
Detachable base with debri filter facilitates installation. Screw the base down and the pump snaps into place.
Strainer is easily cleaned with quick release tabs.
Twin mechanical seal system ensures long life.
Internal metal components are 304 stainless steel.
AML Bilge Pump - 3000 gph
AML Bilge Pump - 2000 gph
3000 gph = 11,356 l/hr
12 Volt or 24 Volt
2000 gph = 7,570 l/hr
12 Volt or 24 Volt
1 1/4” Outlet (32mm)
Delivery Head: 4m
2 year warranty
1 1/8” Outlet (28mm)
Delivery Head: 4m
2 year warranty
Dimensions:
Base Dia - 132mm
Height - 195mm
Dimensions:
Base Dia - 118mm
Height - 170mm
Part Numbers :
6619
(12 Volt)
6619-24 (24 Volt)
Part Numbers :
6614
(12 Volt)
6614-24 (24 Volt)
AML Bilge Pump - 1500 gph
AML Bilge Pump - 1000 gph
1500 GPH = 5676 l/hr
12 Volt or 24 Volt
1000 gph = 3,785 l/hr
12 Volt or 24 Volt
1 1/8” Outlet (28mm)
Delivery Head: 4m
2 year warranty
1 1/8” Outlet (28mm)
Delivery Head: 4m
2 year warranty
Dimensions:
Base Dia - 118mm
Height - 170mm
Dimensions:
Base Dia - 88mm
Height - 135mm
Part Numbers :
6612
(12 Volt)
6612-24 (24 Volt)
Part Numbers :
6607
(12 Volt)
6607-24 (24 Volt)
AML Bilge Pump - 500 gph
Battery Aquapump
500 GPH = 1890 l/hr
12 Volt
*Battery operated - Operates where power cannot reach
*Long pickup - Can reach into hard to get to areas
*Flexible outlet hose - Can pump into bucket or overboard
3/4” Outlet (20mm)
Delivery Head: 4m
2 year warranty
Dimensions:
Base Dia - 88mm
Height - 135mm
Part Number : 6605
292
3VDC – 2 x “D” size batteries
6 lpm Flow rate
Dimensions
Total length 580mm
Discharge length 600mm
Inlet length 370mm
Part Number : 03306
P l u m b i n g - TMC Electric Bilge Pumps
TMC Bilge Pump - 3000 gph
TMC Bilge Pump - 1000 gph
3000 gph = 11,356 l/hr
12 Volt or 24 Volt option
1000 gph = 3785 l/hr
12 Volt
1 1/4” Outlet (32mm)
Delivery Head: 4.6m
1” Outlet (26.5mm)
Delivery head: 4m
Dimensions:
Base Dia - 132mm
Height - 195mm
Dimensions :
Base Dia - 82mm
Height - 126.7mm
Part Numbers :
6620 (12 Volt)
6621 (24 Volt)
Part Number : 6606
TMC Bilge Pump - 2000 gph
2000 gph = 7,570 l/hr
12 Volt or 24 Volt option
1 1/8” Outlet (28mm)
Delivery Head: 4m
Dimensions:
Base Dia - 118mm
Height - 170mm
Part Numbers :
6617 (12 Volt)
6618 (24 Volt)
TMC Bilge Pump - 500 gph
500 gph = 1890 l/hr
12 Volt
3/4” Outlet (20mm)
Delivery head: 3m
Dimensions :
Base Dia - 73.5mm
Height - 94.5mm
Part Number : 6604
TMC Handy Pump - 1000GPH
TMC Bilge Pump - 1000 gph
1000 GPH = 3785 l/hr
12 Volt
1000 gph = 3.785 l/hr
12 Volt
* Equipped with a handle for portability
* Works as a multi-functional pump
1 1/8” Outlet (28mm)
Delivery Head: 4m
Outlet Diameter:
1-1/8”, 3/4” (26,20mm)
Delivery Head: 2.4m
Dimensions:
Base Dia - 88mm
Height - 135mm
Part Number : 6609
Dimensions: 107 x 88 x 165mm (LxWxH)
Part Number : 03305
TMC Automatic Bilge Pumps
TMC Auto-Eye Series Submersible Pump is equipped with a built-in electronic controlled reed sensor system
making it fully automatic. No float switch needed and no power used until pump turns on when water level
rises.
Auto-Eye Pumps are built with a compact, efficient, long life motor, rust and corrosion protected stainless
steel shaft, and high-impact durable plastic housing.
TMC Auto Bilge Pump - 1500 gph
TMC Auto Bilge Pump - 500 gph
1500 GPH = 5676 l/hr
Hose Dia: 1” (26mm)
Delivery Head: 13FT (2.5M)
Dimensions: 190 x 108 x 150mm (LxWxH)
500 GPH = 1890 l/hr
Hose Dia: 3/4” (19mm)
Delivery Head: 13FT (2.5M)
Dimensions: 136 x 82 x 110mm (LxWxH)
Part Numbers : 31156 (12 Volt) or 31157 (24 Volt)
Part Numbers : 31152 (12 Volt) or 31154 (24 Volt)
293
P l u m b i n g - Lalizas Electric Bilge Pumps
Lalizas Bilge Pumps
The Lalizas 12 volt submersible bilge pumps are constructed of shock
resistant A.B.S. plastic and powered by the world’s best compact motor.
The snap-on strainer base makes installation a simple procedure.
Lalizas Bilge Pump - 1000 gph
Lalizas Bilge Pump - 700 gph
1000 GPH = 3785 l/hr
12 Volt
700 GPH = 2650 l/hr
12 Volt
1 1/4” Outlet (32mm)
Delivery Head: 4m
1” Outlet (25mm)
Dimensions:
70mm (base diameter) x 95mm (h)
Part Number : 30673
Dimensions:
70mm (base dia) x 95mm (h)
Part Number : 30672
Lalizas Bilge Pump - 600 gph
Lalizas Bilge Pump - 500 gph
600 gph = 2,271 l/hr
12 Volt
500 GPH = 1890 l/hr
12 Volt
3/4” Outlet (19mm)
3/4” Outlet (19mm)
Dimensions:
60mm (base dia) x 90mm (h)
Dimensions:
60mm (base dia) x 90mm (h)
Part Number : 30671
Part Number : 30670
Lalizas Auto Bilge Pump - 600 gph
The Lalizas Submersible Automatic Bilge Pump combines quality and ease of use in one device.
It has a built-in automatic float switch that activates the pump when the bilge water rises,
thereby allowing the pump to operate even when the boat is unattended.
12 Volt
600 gph = 2,271 l/hr
3/4” Outlet (19mm)
Dimensions: 145mm (l) x 82mm (w) x 90mm (h)
Part Number : 31150
MaXtek Bilge Pump Switch
12V Switch with auto
and manual position for
control of an automatic
bilge pump.
81mm X 62mm
Corrosion-free
aluminium panel.
Part Numbers :
3206
3206-BP (Now available in a Blister Pack)
294
Sure Bail Float Switch
It turns on at a water level of 44mm and off at 22mm. There is also
the facility for a manual over-ride switch.
Power: 6V - 30V, Fuse 15A max
Part Number : SB1-FS
Automatic Float Switch - Lalizas
When water lifts the chamber buoy up 6cm, the switch
automatically turns the bilge pump on until the water is dry.
Power: 12V/ 24V, Fuse: 15A max
Part Number : 91549
P l u m b i n g - Manual Bilge Pumps & Bailers
Plastimo Manual Bilge
Pump 925
Bilge pump with telescopic handle, for
efficient and more comfortable pumping.
*The Plastimo pump is very compact and
the 90° position of the outlets allows
installation where space is limited or
access difficult.
*Outlets swivel through 360° and therefore
adapt perfectly to the pump position in
relation to the strainer and thru-hull fitting.
Output: 0.9 litre per cycle , Capacity: 40.5 litres/min
1” Outlets: (25 mm)
Part Numbers : 39539 (without by-pass)
53058 (with by-pass valve)
Manual Hand Bilge Pump
* Floats
* Great for kayaks
* Compact design
* Fast pumping - 30L/Min
* Soft grip handle
* Complete with storage bag
Dimensions
392 (l) x 102 (w) - Overall
Outlet hose: 32mm dia
Hose length: 330mm
Base dia: 49mm
Part Number : 157001
Bailer - 2.5 litre, Orange
Dimensions: 158mm x 128mm x 215mm
Part Number : 11919
Bailer - 2.0 litre Flexible
130mm x 245mm
Part Number : 11920
Hand Bilge Pump 15GPM (57LPM)
Nylon body - 1½” hose
15 GPM = 57 l/min
160 (w) x 100mm (h)
body length: 235mm
length with handle: 420mm
Part Number : 18515
Hand Pump - 12GPM (45LPM)
Single diaphram selfpriming hand pump
Suitable for salt water,
bilge water, waste water
and effluent.
720GPH (2724 L/H)
Outlets: 1-1/4” (33mm)
Dimension: (LxWxH) (272.5x140x140mm)
Part Number : 71601
Hand Bilge Pump 12GPM (45LPM)
Nylon body & handle
Suits 1” hose.
Dimension: (LxWxH)
(280x155x70mm)
Part Number : 18510
Hand Pump 25GPM - Under Deck
Single diaphram self-priming hand pump.
Designed for mounting under floorboards.
Suitable for salt water, bilge water, waste
water and effluent.
25GPM = 95 l/min
Outlets: 1-1/2” (40mm)
Dimension: (LxWxH) 200x195x160mm
Part Number : 18512
Bailer - Flexible
Collapsible Fabric Bucket
130mm x 195mm
Reinforced PVC
Capacity: 10 Litres
Part Number : 4249
Part Number : 99203
295
P l u m b i n g - TMC Toilets
TMC Electric Toilet Superior
Luxury Electric Marine Toilets with home type bowl
This toilet has a fully skirted base, a large bowl, is Lectra/san compatible and
comes with a bulkhead mounting toggle switch. It also had a built-in macerator,
motor and pump.
Dimensions (LxWxH): 480 x 383 x 460 mm
Fitting: 3/4 inch (20mm) ID inlet hose, 1 inch (25.5mm) ID discharge hose
Part Numbers : 8311 (12 Volt) or 8312 (24 Volt)
TMC Deluxe Electric Toilet
A more comfortable, larger bowled version of the standard electric toilet.
This toilet has a plastic seat, a large bowl, is Lectra/san compatible and comes
with a bulkhead mounting toggle switch. It also has a built-in macerator, motor and
pump.
* Large attractive china bowl
* Inlet and outlet size: 25mm
Dimensions (LxWxH): 484 x 365 x 376 mm
Part Numbers : 8514 (12 Volt) or 8515 (24 Volt)
TMC Electric Toilet 12v - Standard
This toilet has a plastic seat, a small bowl, is Lectra/san compatible and comes
with a bulkhead mounting toggle switch. It also has a built-in macerator, motor and
pump.
* Electric Marine Toilet with small bowl
* Standard plastic seat and cover Switch Box included.
Dimensions (LxWxH): 445 x 360 x 352 mm
Part Numbers : 8305 (12 Volt) or 8306 (24 Volt)
TMC Manual Toilet - New Euro Model
Manual marine toilet with small bowl and standard plastic seat and cover.
New angled hand pump design for easy pumping.
Bowl is made of high quality ceramic. Base, pump and seat is constructed of noncorrosive Marine Plastic.
Fitting: Connection for 3/4” (19.5mm)ID inlet hose. 1-1/2” (37.8mm) ID discharge
hose.
Dimensions: LxWxH 16.73x18.11x13.6 inches (425x460x345mm)
Part Number : 8303
296
P l u m b i n g - Portable Toilets
MaXtek Portable Chemical Toilet
This portable toilet is ideal as a camping toilet or on the boat and is suitable for interior and
exterior use.
Self-contained with no external water or power connections required.
Fresh water capacity: 12lt (provides up to 50 flushes)
Waste capacity: 10 litre or 20 litre
Dimension: 355mm (W) x 410mm (D) x 420mm (H)
* The double sealed drain valve protects against leakages and odours
* Heavy duty, corrosion resistant side latches lock the tanks together
* Both waste and fresh water tanks are one-piece construction.
* The waste holding tank can be easily emptied, without using any tools
Part Numbers : 11867 (10 litre waste)
11867-20 (20 litre waste)
MaXtek Waste Tank
for Portable Toilet
A 20 litre waste holding tank for the
portable toilets.
Part Number : 11869
MaXtek Camping Toilet Frame
This toilet frame elevates the portable
toilet 125mm.
Ideal when used as a camping toilet.
Part Number : 11870
Porta Pottie Excellence - White
For those who seek luxury and high-quality during leisure time, or looking for a solution at
home during renovations or simply as a second toilet. Why not consider this jewel amongst
portable toilets?
* Integrated toilet paper holder
* Flush-water level indicator
* Cover controls (for piston pump, water fill cap, water level indication)
* Water fill adaptor
* Improved carry handle of the water tank
* Including free 150 ml Aqua Kem Green + 150 ml Aqua Rinse
Waste tank capacity: 21L
Flush water tank capacity: 15L
Toilet weight: manual version: 5.5 Kg
Dimensions: 448 x 388 x 450 mm (H x W x D
Part Number : 5006
Porta Pottie Qube 365 - Ruby
The Porta Potti Qube 365 is a family size portable toilet with a high capacity waste holding
tank and a natural seating height.
* Manual flush, piston pump
* Integrated pour-out spout
* Integrated cover-lock on all models
* Including free 150 ml Aqua Kem Green + 150 ml Aqua Rinse
Waste tank capacity: 21L
Flush water tank capacity: 15L
Toilet weight: 4.0 Kg
Dimensions: 414 x 383 x 427 mm
Part Number : 5005
297
P l u m b i n g - Toilets Parts & Accessories
TMC Toilet Electric Flush Control
TMC Electric Toilet Flush Controller includes one box of 6 spare fuses.
This controller utilises a built-in micro IC control system to allow two flush
options; a half flush lasting 5 seconds to deliver 2 litres of water, and a full
flush lasting 10 seconds to deliver 4 litres of water.
This easy to use one-touch controller panel is water resistant. This
controller panel is design to be an extra level of protection for your electric
toilet against current spikes.
This controller is for 12VDC System.
TMC Manual Euro Toilet Pump
Part Number : 8307
Complete Assembly for 99901 99903
TMC Toilets
TMC Toilet Pump
Part Number : 8304
This is a complete replacement
pump unit for TMC electric toilets.
Four bolts plus the power cable is all
that is involved in changing a pump
over.
Part Numbers : 8309A (12 Volt)
or 8308A (24 Volt)
TMC Toilet Seat Standard - with Hinges
Standard Seat/Cover for TMC Marine Toilet Models 99901, 99902,
99905 and 99909.
Round shape made from marine plastic that
is break and stain resistant.
Comes with hinges, screws and washers.
Part Number : 8323
TMC Toilet Waste Pump
Razor Kit for TMC
Electric Toilets
Part Number : ET3626
TMC Repair Kit for
Manual Toilets
Part Number :8315
In-Line Macerator Pumps
* Self priming
* Runs dry without
damage
* No filter required.
* Can pump a mix of
air and water.
*Used in line for
emptying holding tanks.
*Self priming
*Runs dry without
Damage
*Thermal overload
automatic restart
*Dual blade design
*Ignition protected
*Impeller design and including O-ring sealed end bells
*Pump grinds waste into small particles for easy disposal
* Adjustable clamping ring allows the head assembly to be
rotated 360º to accommodate plumbing.
Part Number :
NS65 (12 Volt)
12 Volt, 7 Amp
Capacity: 20LPM, Delivery Head: 65ft (20m)
Hose Diameter: 1-1/2” (38mm)
TMC Branded Macerator Pumps (Same Spec as above):
8499 (12 Volt)
8500 (24 Volt)
Single Diaphram Pump designed to handle unmacerated toilet
waste / black water.
Part Numbers :
0620921 (12V)
0620922 (24V)
298
P l u m b i n g - TMC Toilets Parts
TMC Toilet Part No.6 Seat Hinge
Support
Standard Seat/Cover Hinges for TMC
Marine Toilet Models 99901, 99902,
99905 and 99909.
Part Number : 8346
TMC Toilet Part No.12 Joint Packing
TMC Toilet Part No.23 Flapper Valve
Part Number : 8345
TMC Toilet Part No.24 Discharge Port
Part Number : 8321
Part Number : 8328
TMC Toilet Part No.25 Adaptor
TMC Toilet Part No.15 Elbow
Part Number : 8354
Part Number : 8331
TMC Toilet Part No.18 Centrifugal
Impeller
TMC Toilet Part No.27 Body (Pump)
Part Number : 8387
Part Number : 8317
TMC Toilet Part No.19 Macerator
Housing
Part Number : 8316
TMC Toilet Part No.20 & 20-1 Chopper
Blade Set
Part Number : 8333
TMC Toilet Part No.28 Gasket
Part Number : 8322
TMC Toilet Part No.29 - Impeller
Flexible
Part Number : 8313
TMC Toilet Part No.21 Gasket
Part Number : 8342
TMC Toilet Part No.22 Base
TMC Toilet Part No.44 Base Packing
Gasket
Part Number : 8395
Base unit for TMC Standard Electric
Marine Toilet’s 99902 and 99904.
TMC Toilet Part No.64 Elbow
Part Number : 8340
Part Number : 8385
299
P l u m b i n g - Valves & Pipe Fittings
Electronic Aquavalve - 3 way Valve
The indicators on the control panel show the current position of the valve. The valve
has two positions ‘holding tank’ or ‘overboard’.
Part Numbers : 1378A (12 Volt) or 1378B (24 Volt)
Aquavalve - 3 way Y Valve
The Aquavalve® has been designed as a two way diverting Marine Valve to divert treated or
untreated sewage into a holding tank or treatment system.
This valve can handle hot or cold water, as well as waste treatment chemicals.
Part Numbers : 90314 - Standard
90313 - Through Bulkhead
(Hose tails sold separately)
Aquavalve Hosetails
Designed to complement the
Aquavalve range.
Manufactured from glass
reinforced nylon composite for high
strength and durability.
Part Numbers :
90251 - Tail 19mm 1-1/2” BSP White
90262 - Tail 25mm 1-1/2” BSP White
90283 - Tail 32mm 1-1/2” BSP White
90294 - Tail 38mm 1-1/2” BSP White
3 Way Y Valve
Made of strong Nylon
Bulkhead Mounting
For 25mm or 40mm Hose
Part Numbers :
18600-01 - 25mm
18600-02 - 40mm
Ball Valves
Compact, may be used for throttling as well as an ON/OFF
valve.
Sizes from 15 to 50mm
Part Numbers :
6410 - 15mm
6411 - 20mm
6412 - 25mm
6413 - 32mm
6414 - 40mm
6415 - 50mm
300
Aquavalve Elbows 120 º or 90º
Aquavalve Elbows are
available with an exit angle of
either 120º or 90º.
Manufactured from glass
reinforced nylon composite for
strength and durability..
Part Numbers :
90299 - Aquavalve 90° Bend 38mm 1-1/2” BSP White
90298 - Aquavalve 120° Elbow 38mm 1-1/2” BSP White
90259 - Aquavalve 90° Bend 25mm 1-1/2” BSP White
90258 - Aquavalve 120° Elbow 25mm 1-1/2” BSP White
Non Return Valve
Designed to permit fluid flow in
one direction only.
Part Numbers :
6417 - 20mm
6418 - 25mm
6416 - 32mm
6419 - 40mm
6401 - 50mm
Non Return valve
Part Numbers :
31345 - 3/4 or 1” outlet
31348 - 1½” or 1¼” outlet
Nylon Non Return Valve
To Suit 25mm or 38mm Hose Pipe
Part Number : 11581
P l u m b i n g - Skin Fittings , Hosetails , T-Pieces
Skin Fittings - Hose Tails
Skin Fittings - Below Water Applications
Used for above waterline applications.
The size refers to the
hoses’ inside diameter.
Full thread, mushroom type skin fittings
Used for below water line applications.
The thread is BSP.
Part Numbers :
6703 - 15mm White
6705 - 20mm White
6705B - 20mm Black
6706 - 25mm White
6706B - 25mm Black
6707 - 32mm White
6707B - 32mm Black
6708 - 40mm White
6708B - 40mm Black
6710 - 50mm White
Part Numbers :
6719 - 20mm
6720 - 25mm
6721 - 32mm
6722 - 40mm
6723 - 50mm
Skin fitting with 90 degree elbow
Skin Fitting - Hosetail
Used for above
waterline applications.
The size refers to the
hoses inside diameter.
Used for above waterline
applications
Part Numbers :
6485 - 20mm
6486 - 25mm
6487 - 38mm
Part Numbers :
6708N - 40mm
6707N - 30mm
Male Hose Tails
Female T-Piece
Part Numbers :
6503 - 1/2” x 1/2”
6504 - 1/2” x 5/8”
6506 - 15mm
6507 - 20mm
6508 - 25mm
6509 -32mm
6512 - 40mm (Polymer)
6512H - 40mm (Hansen)
6510 - 50mm
Used to tee off three male threads.
Hose Tail Elbow
90º Bend
20mm Hose I.D.
Part Number : 6460
Part Numbers :
6462 - 15mm
6463 - 20mm
6464 - 25mm
6465 - 32mm
6466 - 40mm
6467 - 50mm
Bronze Tailpieces / Elbow Hosetails
Part Numbers :
41531 - 3/4” x 1”
41533 - 1” x 1-1/4”
Hose Tail
T-Piece
Suits 1/2” pipes
Part Number : 6500
301
P l u m b i n g - Tru Design Valves & Pipe Fittings
Tru Design Ball Valves
Tru Design Ball Valves are designed and made in New Zealand for use in marine
applications above and below the water line. They are IMCI approved to ISO standard
9093-2 and are ideal for controlling inlet and outlet water requirements.
The bodies of these valves are moulded in a glass reinforced nylon composite material
providing high impact and tensile strength, resulting in a light weight unit, free from
corrosion and electrolysis. The internal workings are moulded in a Teflon enhanced polymer
for a smooth action, also ensuring continuous ease of operation over many years.
Part Numbers :
90471 Ball Valve 15mm ½” BSP
90276 Ball Valve 20mm ¾” BSP
90242 Ball Valve 25mm 1” BSP
90240 Ball Valve 32mm 1 ¼” BSP
90235 Ball Valve 40mm 1 ½” BSP
90472 Ball Valve 50mm 2” BSP
Tru Design Hose Tail Elbows
Manufactured in a glass reinforced nylon composite, providing both strength and durability.
Connectors eliminate the corrosion and electrical bonding problems associated with
metallic fittings. The Connectors are designed for twin hose clamps and to not crush under
high load conditions.
The 90° Connector is especially useful for eliminating large radius bends involved in
plumbing with stiff hose. This allows hose to be securely routed next to bulkheads and walls.
Part Numbers :
90699 Connector 90° Bend 19mm Black
90494 Connector 90° Bend 25mm Black
90291 Connector 90° Bend 38mm Black
90496 Connector 90° Bend 50mm Black
90701 Connector 90° Bend 19mm White
90493 Connector 90° Bend 25mm White
90292 Connector 90° Bend 38mm White
90495 Connector 90° Bend 50mm White
Tru Design Hose Tails with Long Thread
Tru-Design has developed a comprehensive range of Tails, providing an easy hose
connection medium for numerous marine situations.
Manufactured from a glass reinforced nylon composite, providing high strength and long
life. The Tails have parallel threads for sealing using thread tape and long tails for secure
double clamping of hoses.
Part Numbers :
90246 Tail 13mm ½” BSP Long Thread
90252 Tail 19mm ¾” BSP Long Thread
90263 Tail 25mm 1” BSP Long Thread
90285 Tail 32mm 1¼” BSP Long Thread
90231 Tail 38mm 1½” BSP Long Thread
90518 Tail 50mm 2” BSP Long Thread
Tru Design Female Thread Elbows with Hose Tails
A range of 90° Tails with Female threads to solve a number of problems encountered in
marine plumbing applications. The Tail can be fitted directly to a Skin Fitting to create a 90°
Skin Fitting with Tail. This allows the piping to run along the hull.
Moulded in Glass Reinforced composite Nylon 6 these Tails are also suitable for use in
contact with Petrol and Diesel.
Part Numbers :
90631 Tail 32mm 1¼” BSP Female 90° Bend
90629 Tail 38mm 1½” BSP Female 90° Bend
90627 Tail 50mm 2” BSP Female 90° Bend
302
P l u m b i n g - Tru Design Pipe Fittings
Tru Design Male Thread Elbows with Hose Tails
This range of Long Thread 90 º Tails are designed to screw into the range of Ball Valves but can also be used
in many applications. Moulded in Glass Reinforced composite Nylon 6 these Tails are also suitable for use in
contact with Petrol and Diesel.
Part Numbers:
90517 - Tail 13mm ½” BSP Long Thread 90° Bend
90372 - Tail 19mm ¾” BSP Long Thread 90° Bend
90373 - Tail 25mm 1” BSP Long Thread 90° Bend
90374 - Tail 32mm 1¼” BSP Long Thread 90° Bend
90375 - Tail 38mm 1½” BSP Long Thread 90° Bend
90376 - Tail 50mm 2” BSP Long Thread 90° Bend
Tru Design Hose Connectors
Tru Design offers a range of straight Hose Connectors to join 50mm, 38mm, 32mm, 25mm,
19mm and 13mm hose sizes.
Manufactured from a glass reinforced nylon composite material these connectors display
high strength and high durability, allowing double clamping and a secure connection
Part Numbers :
90245 Connector 13mm/13mm
90248 Connector 19mm/19mm
90257 Connector 25mm/25mm
90356 Connector 32mm/32mm
90290 Connector 38mm/38mm
90492 Connector 50mm/50mm
Tru Design Hose Reducers
Tru-Design offers a range of straight Hose Reducers to mix and match different hose sizes.
Manufactured from a glass reinforced nylon composite material these connectors display
high strength and high durability, allowing double clamping and a secure connection
Part Numbers :
90403 Reducer 19mm - 13mm
90404 Reducer 19mm - 16mm
90405 Reducer 25mm - 19mm
90406 Reducer 32mm - 25mm
90407 Reducer 38mm - 25mm
90408 Reducer 38mm - 32mm
Tru Design Y Pieces
A Y Piece is the best way for combining waste streams. Unlike a ‘T’ there is less likelihood
of blockage, salt buildup does not degrade performance and the flow does not back up into
the non-flowing branch.
Y Pieces are available in a variety of sizes to allow 25mm and 38mm drain hoses to branch
into one line. Manufactured in Glass Reinforced Nylon 6 Polymer, they are extremely tough
and will handle both hot and cold water.
Part Numbers :
90456 - Y Piece 25mm
90457 - Y Piece 25mm (2 pipes) / 38mm (single pipe)
90458 - Y Piece 38mm
303
P l u m b i n g - Tru Design Skin Fittings
Tru Design Skin Fittings - Full Thread
Tru Designs range of Skin Fittings are certified by the
International Marine Certification Institute (IMCI) in Belgium.
A unique grade of glass reinforced Nylon composite provides
high impact and tensile strength.
Skin Fittings available in both black and white.
Part Numbers :
90424 Skin Fitting ½” BSP Black
90431 Skin Fitting ¾” BSP Black
90422 Skin Fitting 1” BSP Black
90420 Skin Fitting 1 ¼” BSP Black
90418 Skin Fitting 1 ½” BSP Black
90428 Skin Fitting 2” BSP Black
90425 Skin Fitting ½” BSP White
90432 Skin Fitting ¾” BSP White
90423 Skin Fitting 1” BSP White
90421 Skin Fitting 1 ¼” BSP White
90419 Skin Fitting 1 ½” BSP White
90429 Skin Fitting 2” BSP White
Tru Design Skin Fittings - Hose Tail
Tru Design Skin Fittings with Tail are designed for use above
the water line where a Ball Valve or Seacock is not needed
to be fitted. The integrated tail makes for quick, easy and
compact installation.
Use of the unique grade of glass reinforced Nylon composite
provides high impact and tensile strength.
Part Numbers :
90522 Skin Fitting with Tail 13mm ½” BSP Black
90523 Skin Fitting with Tail 19mm ¾” BSP Black
90524 Skin Fitting with Tail 25mm 1” BSP Black
90525 Skin Fitting with Tail 28mm 1” BSP Black
90526 Skin Fitting with Tail 32mm 1 ¼” BSP Black
90527 Skin Fitting with Tail 38mm 1 ½” BSP Black
90528 Skin Fitting with Tail 50mm 2” BSP Black
304
90426 Skin Fitting with Tail 13mm ½” BSP White
90427 Skin Fitting with Tail 19mm ¾” BSP White
90430 Skin Fitting with Tail 25mm 1” BSP White
90436 Skin Fitting with Tail 28mm 1” BSP White
90433 Skin Fitting with Tail 32mm 1 ¼” BSP White
90434 Skin Fitting with Tail 38mm 1 ½” BSP White
90435 Skin Fitting with Tail 50mm 2” BSP White
P l u m b i n g - Tru Design Skin Fittings & Vents
Tru Design Skin Fittings - Recessed
Tru Design Recessed Skin Fittings - fully threaded for below water
line applications
These new skin fittings can be recessed into the hull, and help to
minimise the disturbance of water flow across the boats hull.
IMCI Certified to ISO 9093-2
Features :
* Supplied with a Nylon 6 Natural washer to increase locknuts support on through hull assembly.
* The use of composite Skin Fittings eliminates corrosion, and avoids electrolysis problems.
* All types of Standard Bedding compounds and Epoxy or Polyester Resins can be used in installation.
Part Numbers :
90676 - Skin Fitting Recessed ½” BSP Black
90677 - Skin Fitting Recessed ¾” BSP Black
90678 - Skin Fitting Recessed 1” BSP Black
90679 - Skin Fitting Recessed 1 ¼” BSP Black
90680 - Skin Fitting Recessed 1 ½” BSP Black
Tru Design Vented Loops
Tru Designs Aquavent® has been designed and manufactured in New Zealand for use in
Marine applications.
Vented loops are commonly used for inlet and discharge pipes on toilet installations below
the water line. Our aquavent is moulded in a glass reinforced nylon composite, with a silicone
bleed valve. The bleed valve allows air into the system to stop syphoning yet seals effectively
when water or fluid pass through.
The aquavent can be used as a holding tank vent by replacing the bleed valve fitting with a tube that is connected
to a deck level vent.
Aquavents are available in three sizes:
Part Numbers :
90319 - Vented Loop 19mm White 90321 - Vented Loop 25mm White 90323 - Vented Loop 38mm White
90318 - Vented Loop 19mm Black
90320 - Vented Loop 25mm Black
90322 - Vented Loop 38mm Black
305
P l u m b i n g - Pipe Fittings
Elbows - Female to Female
Elbows - Male to Female
Part Numbers :
6444 - 15mm
6445 - 20mm
6446 - 25mm
6447 - 32mm
6448 - 40mm
6449 - 50mm
Part Numbers :
6476 - 15mm
6450 - 20mm
6451 - 25mm
6478 - 32mm
6477 - 40mm
6479 - 50mm
Nipples
Used for joining pipes.
Part Numbers :
6420 - 15mm
6421 - 20mm
6422 - 25mm
6423 - 32mm
6424 - 40mm
6425 - 50mm
Reducing Bushes
Part (Outside x Inside) :
6429 - 15mm x 10mm
6430 - 20mm x 15mm
6431 - 25mm x 15mm
6432 - 25mm x 20mm
6433 - 32mm x 20mm
6434 - 32mm x 25mm
6435 - 40mm x 20mm
6436 - 40mm x 25mm
6437 - 40mm x 32mm
6438 - 50mm x 20mm
6439 - 50mm x 25mm
6440 - 50mm x 32mm
6441 - 50mm x 40mm
6442 - 65mm x 50mm
Vented Loop 25mm Stainless Steel
Vented loops are commonly used
for inlet and discharge pipes on
toilet installations below the
water line.
Part Number : 8513
Reducing Nipples
Part Numbers :
6470 - 20mm x 15mm
6471 - 25mm x 20mm
6472 - 32mm x 25mm
6482 - 40mm x 25mm
6473 - 40mm x 32mm
6474 - 50mm x 40mm
Sockets
BSP Threads
Part Numbers :
6480 - 15mm
6458 - 20mm
6457 - 25mm
6468 - 32mm
6469 - 40mm
6475 - 50mm
Plugs
Threaded Pipe Plug
Part Numbers :
6453 - 10mm
6454 - 15mm
6456 - 20mm
6455 - 25mm
6452 - 32mm
Cooling Water Strainer
Designed to filter out debris, sand, weed, plastic debris, etc.
before it blocks the engine cooling system.
Assembly and mesh manufactured from impact resistant
polypropylene thermoplastic polymer. The clear threaded lid is
acrylic.
Part Numbers :
18526-01 - For Hose 25mm
18526-02 - For Hose 32mm
18526-03 - For Hose 38mm
306
P l u m b i n g - Water Strainers
Salt Water Strainer
In-line Strainer - 15mm Thread
Salt Water Strainer for inline engine cooling systems. This is a
device through which the raw water flows and is designed to
filter out debris, sand, weed, plastic debris, etc. before it blocks
the engine.
Fine Mesh Filter
15mm Male Thread
Part Number : 18524
Has removable filter or screen which should be checked and
cleaned on a regular basis.
Clear lid for visual check as well.
Dimensions:
320mm(H) X 280mm(W) X 180mm(D)
Part Number :
6804 - 40mm female thread
6803 - 50mm Hose Tails
Scoop Strainers
Keep debris from entering water or air
intakes whilst promoting a healthy flow
of water or air.
Glass reinforced
nylon for strength
and the elimination of
electrolysis.
In-line Strainer - 3/4” Hose Tail
In-line mesh filter suitable for installing
within water supply lines to water
pumps, drainage systems and shower
discharge pumps.
Mesh is easily removed so as to clean
out lint and debris.
3/4” Hose Tail
Part Number : 18521
In-line Strainer - 1/2” Hose Tail
Large Mesh Filter
1/2” Hose Tail
Part Number : 18523
Bronze Intake Strainer - Oval
Part Numbers :
90410 - Scoop Strainer 2” - 177 x 129mm
90411 - Scoop Strainer 1 ¼” - 96 x 130mm
Bronze Scoop Strainers
Keep debris from entering water intakes.
Made of Marine grade
Bronze
Part Numbers :
113420 - Scoop
Strainer - 80 x 120mm
113421 - Scoop Strainer
- 100 x 150mm
Bronze Intake Strainer - Removable
Oval - 100mm x 70mm
Pipe Size: 32mm or 1¼”
Max Hull thickness: ~50mm
Round - Removable Cover
Overall Diameter: 80mm
Pipe size: 32mm or 1¼”
Max Hull thickness: ~50mm
Part Number : 41501-03
Part Number : 13540-04
307
P l u m b i n g - Showers
Shower Kit
Shower Box, Nozzle, Mixer, hose and fittings
Box Dimensions:
250mm x 190mm x 95mm
2.5m or 5m hose length
Part Numbers :
6565 (kit with 5m hose)
6566 (kit with 2.5m hose)
Shower Kit
Shower Box, Nozzle, Mixer,
5m hose and fittings.
Recessed hatch:
178mm x 117mm x 84mm
deep
Part Number : 6553
Small Shower Box with Mixer
Mixer Tap in housing
with gasket.
Dimensions:
95 x 95 x 55mm(D)
Cutout Ø: 75mm
Part Numbers :
6555 - box with mixer
6550 - box only
Shower Box with Cap
Designed to fit shower nozzle with the
hose sticking out the
bottom of the box.
Outside Shower Unit
External shower box with lockable cover. Suitable for RV,
Caravans, motorhomes, camper trailers and marine use.
Designed for outside use, the
door has an attachment for
securing the shower head
when in use.
A complete shower kit
complete with:
Shower head
Pull-out 1.2m white hose
Hot and Cold Taps
Dimensions:
Overall: 340mm (l) x 215mm (h)
Cut-out size: 280mm (l) x 150mm (w) Depth 130mm
Connection: 15mm BSP thread
Part Number : 6549
Shower Sump System LSU600 - 12V
Designed especially for use on boats with built-in sink, shower,
or tub. The LSU 600 will pump all water out of the drain / sump.
* Built-in automatic bilge pump that will start as soon as it
senses water.
The LSU 600 System has 2 x 3/4” and
1 x 1” inlets and
1 x outlet hose with non-return valve for hose of 3/4” and 1”
diameter.
Dimensions: 100mm (h)
x 195mm (w) x 260mm
(including fittings or ~195mm
excl hose fittings)
Part Number : 31349
Part Number : 6561
Shower Box with Cap - Round
Side-mount Housing with Door
Designed for holding a shower
nozzle
External Dimensions:
145 x 190 x 80mm(D)
Cutout: 114mm x 160mm
Part Number : 6570
308
Designed to fit shower nozzle with the hose sticking out the
bottom of the box.
Cutout: 66mm dia
Dimensions:
88mm dia x 80mm
Part Number : 6557
P l u m b i n g - Showers
Shower Nozzle with Hose
Shower Mixer
White coloured
2.5m or 5m hose length
Shower Mixer Tap with connectors, ready to install.
Part Numbers :
6560W - 2.5m White
6562W - 5m White
Dimensions:
32mm dia cutout
35mm dia knob
40mm dia overall
Part Number : 6551
Shower Nozzle
Water Accumulator
Same as in the boxed shower kits.
Used for providing constant pressure in water systems. Designed
for use in boats and RV’s.
Thumb type trigger can click down to
spray without pressing.
Part Number : 6559
240mm long
Part Number :
18527
Shower Nozzle
Part Number : 95725
Toilet Roll Holder
Part Number : 4632
Solar Shower
Fill with water and hang up
in the sun, to get nice hot
shower water.
2.5 Gallon or 5 Gallon Sizes
Part Numbers :
40072 - 2.5 Gallon
40075 - 5 Gallon
Drain Sleeve
Has flange at one end and
a nut at the other.
155(L) x 30(OD) x 23mm(ID)
Part Number : 6761
Outboard Well Drains
Has flange at one end and a
nut at the other.
Cockpit Drain 90º Elbow
80(L) X 30(OD) x 17mm(ID)
Drilling hole dia: 22mm
Tail dia: 38mm
For bulkhead to 75mm
Part Number : 6753
Part Number : 4108
309
Plumbing -
Diesel Heaters
Eberspacher Airtronic D2 Diesel Heater
A compact and economical heater for Sail and Motor boats 12-35ft in length or small
motor homes.
Your Airtronic advantages:
*Fast interior air heating with high performance power setting for especially short
heating times.
*Stops condensation from forming on the windscreen.
*Automatic continuous interior temperature control with temperature pre-selection.
*With the lowest setting on the market (850 – 900 W), it is extremely quiet.
*Quiet night operation.
*Low fuel and electricity consumption – ideal when long periods of use are required.
*Compact devices that save space and are easy to install.
Specifications:
*Fuel Type: Diesel
*Voltage: 12/24V
*Control / Heat Settings: Low, Medium, High, Power
*Heat Output: Low – 850W, Medium – 1,200W, High – 1,800W, Power – 2,200W
*Air Flow Volume: Low – 40Kg/h, Medium – 60Kg/h, High – 90Kg/h, Power – 105Kg/h
*Electrical Power Consumption: Low – 8W, Medium – 12W, High – 22W, Power – 34W
*Fuel Consumption: Low – 0.10l/h, Medium – 0.15l/h, High – 0.23l/h, Power – 0.28l/h
*Dimensions: 310 x 115 x 122
*Weight: 2.7kg
Part Numbers :
406200 - Eberspacher Airtronic D2 Marine Heater Kit
406206 - Eberspacher Airtronic D2 Motor Home Heater Kit
Eberspacher Airtronic D4 Diesel Heater
A compact and economical heater for Sail and Motor boats 20-44ft in length or medium
sized motor homes.
Specifications:
Fuel Type: Diesel
Voltage: 12/24V
Control / Heat Settings: Low, Medium, High, Power
Heat Output: Low – 900W, Medium – 2,000W, High – 3,000W, Power – 4,000W
Air Flow Volume: Low – 60Kg/h, Medium – 110Kg/h, High – 150Kg/h, Power – 185Kg/h
Electrical Power Consumption: Low – 7W, Medium – 13W, High – 24W, Power – 40W
Fuel Consumption: Low – 0.11l/h, Medium – 0.25l/h, High – 0.38l/h, Power – 0.40l/h
Dimensions: 376 x 140 x 150
Weight: 4.5kg
Part Numbers :
406202 - Eberspacher Airtronic D4 Marine Heater Kit
406208 - Eberspacher Airtronic D4 Motor Home Heater Kit
310
Plumbing -
Diesel Heaters & Water Heaters
Eberspacher Hydronic D5WSC Water Heater
Eberspacher water heaters work independently of the engine and thus offer a double
plus: pre-heating the Boat’s saloon or multiple cabins.
The heaters are integrated in the cooling water system of the engine. The thermal energy
gained is absorbed by the vehicle’s own heat exchanger and distributed, finely dosed,
into the interior as warm air through existing air vents. The engine is warmed up with the
residual heat in the cooling water. And in summer you can easily enjoy pre-cooling with
an Eberspacher Hydronic.
Cosy warm rooms, hot water: Your Eberspacher Hydronic water heater does all this for
you. It keeps the cabin at the perfect temperature, and after a cold day outside, a hot
shower is waiting for you. Your water is guaranteed to be at just the right temperature.
In short: you’ve got advantages all round when you install an Eberspacher Hydronic.
Specifications:
*Fuel Type: Diesel
*Voltage: 12V
*Control / Heat Settings: Low, High
*Heat Output: Low – 2,400W, High – 5,000W
*Water Throughput: 900 +- 100 L/H
*Electrical Power Consumption: Low – 23W, High – 50W
*Fuel Consumption: Low – 0.27L/H, High – 0.62L/H
*Dimensions: 220 x 86 x 160
*Weight: 2.3kg
Part Numbers :
406204 - Eberspacher Hydronic D5WSC Water Heater - Marine Kit
406205 - Eberspacher Hydronic D5WSC Water Heater - Motor Home Kit
Force 10 Water Heaters
All Kuuma (Force 10) Marine Water Heaters come standard with Electric and high
performance Heat Exchange capabilities.
* 1500 Watt AC element - 230 Volts (110v on request)
* Large Heat Exchanger
* TIG welded aluminium tank
* Stainless Steel Case
* 2 Year Warranty
Tested and certified to the latest Australian standards
AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349
UL & CE certified including the marine supplement - ignition protected
Installed by:
Azzurra, Beneteau, Campion, Chris craft, Crownline, Doral, Donzi, Hunt, Hunter, Leopard, Nordic tug, Mustang, Princecraft, Riviera, Sabre
Direct replacement for most Seaward, & Atwood Marine Water heaters.
22.7 litre (6 US gal)
42 litre (11 Gallon)
76 litre (20 Gallon)
Length: 20 inch / 508mm
Width: 15.5 inch / 394mm
Height: 13.6 inch / 346mm
Length: 23 inch / 584mm
Width: 16 inch / 406mm
Height: 16 inch / 406mm
Length: 18.75 inch / 476mm
Width: 18.75 inch / 476mm
Height: 29.5 inch / 749mm
Part Numbers :
406101 - side mounts
406111 - front and rear mounts
Part Numbers :
411101 - side mounts
411111 - front and rear mounts
Part Number : 418101
311
P l u m b i n g - Water Tanks
LALIZAS Water Tanks
Made from non-toxic PVC, they are suitable for drinking water.
The tanks are supplied with a valve, which can be used for
filling, and with two extra fittings (cut through hole: 48mm).
The cut- thru fittings are designed so you can add an outlet to the tank
at the most suitable position to suit your application.
Supply valve can be removed. Without the valve you can
connect to a 20mm threaded female fitting.
Supplied extra fittings:
1 x 12mm hosetail suitable as an outlet to your water supply pump.
1 x 40mm hosetail suitable as an inlet filler or joining tanks.
The Lalizas flexible water tanks are available in rectangular and
triangular models.
Part Numbers :
31321 - 55 Litre - Rectangular - 740mm x 600mm
31325 - 55 Litre - Triangular - 860mm x 210mm x 930mm
31322 - 75 Litre - Rectangular - 740mm x 840mm
31323 - 100 Litre - Rectangular - 740mm x 100mm
31326 - 100 Litre - Triangular - 1080mm x 210mm x 1080mm
Water Tank - Folds Flat - 19 litre
Water container designed so as to fold flat when not in use.
Ideal for tramping, canoeing, camping or anywhere water and
space savings are necessity. Holds 19 litres when full and
collapses flat when not in use.
Dimensions when full:
70 x 270 x 270mm
Part Number : 71050-01
Motorhome Waste dump kits
This Motorhome waste dump kit comes in to different sizes 25mm or
32mm to suite your application. Included in this kit are high quality
WAM fittings made of durable polypropylene.
The kit consists of:
1 x 3M Flexible Waste Pipeline
1 x Pipeline Ball Valve
1 x Pipeline Female Camlock with Hose Tail
1 x Pipeline Male Camlock
1 x Pipeline Dust Cap
Part Numbers :
2010 - 25mm Motorhome waste dump kit
2011 - 32mm Motorhome waste dump kit
WAM Female Pipeline Camlock with
Hose Tail
WAM Male Pipeline Camlock
The WAM Male Camlock is made of high quality durable
polypropylene and comes in two different sizes 25mm or
32mm to suite your application.
The WAM Female Pipeline Camlock with Hose Tail is made of high
quality durable polypropylene and comes in two different sizes 25mm
Part Numbers :
or 32mm to suite your application.
2016 - Male Camlock 25mm
2013 - Male Camlock 32mm
Part Numbers :
2014 - Female Camlock 25mm
2015 - Female Camlock 32mm
312
P l u m b i n g - Washing Maching
Compact RV Washing Machine
Ideal for Caravans and Motorhomes, this easy to use Fully
Automatic RV Washing Machine offers washing convenience
wherever your travels take you. Featuring simple controls and
flexible washing modes, you have the convenience of washing
when you want in your own RV.
Features:
*240v.
*Economical Cold Water Washing.
*7 Washing Program combinations including Quick Wash.
*Hi and Low water level adjustment for large & small loads.
*Blue LED display with Wash Time Remaining function.
*Out of balance sensor with auto rebalancing during spin cycle.
*Auto Power Off function.
*Precision Stainless Steel wash tub.
*Inbuilt Lint Filter.
*Clothes Basket doubles as a Tub Stabiliser in transit.
*Securing Strap & Bracket Included.
*Dimensions (mm): 410w x 420d x 640h.
*1 Year Warranty.
Part Number : 5008
Safety
315. Inflatable
Lifejackets
Lalizas Sigma Lifejackets 150N, CE
ISO 12402-3
Lalizas Sigma Lifejackets 150N
Lalizas Delta 150N, Inflatable
Lifejacket Belt-Pack CE ISO
12402-3
Lalizas Alpha Child’s Gas Inflate
Lifejacket 150N, CE ISO 12402-3
317. Lifejackets
Lalizas Commercial SOLAS
Lifejacket - Adult
Lalizas SOLAS ‘74 Life Jacket
Ski Buoyancy Aid CE 50N
Lalizas Childs Lifejacket Chico CE
100N
Pet Retriever Buoyancy Aid &
Harness
318. Personal
Safety Lights &
Accessories
Auto Re-arm Kit for Child’s
Lifejacket (JS1)
Manual Re-arm Kit
Harness & Lifejacket Crotch Strap
Auto Re-arm Kit
Lifejacket Flashing Light - Water
Activated
LED floating Lifebuoy light
Lifebuoy Light Mounting Bracket
319. Man
Overboard Safety
Equipment
Lifebuoy Ring SOLAS with
Reflective Tape
Lalizas Horseshoe Lifebuoy Basic I
Life Saving Float - 4 person
Plastic Holder for Life Ring
Life Ring Holder
Throwing Ring with 30m Floating
Rope
320. Day Signs &
Safety Ladders
Flushmount Safety Ladder
Safety Ladder
Kayak Safety Kit and Bailer
Anchor Ball - Day Sign
Motoring Cone - Day Sign
Radar Reflector
321. Harnesses
Single Hook Safety Line - 1.5m
Twin Hook Safety Line - 1.85m
Twin Hook Safety Line Elastic 1.20/1.77m
Triple Hook Safety Line 1.20/1.77m
Harness & Lifejacket Crotch Strap
322. Bosun’s
Chairs
Lalizas Safety Bosun’s Chair
Lalizas Professional Bosun’s Chair
Lalizas “Life-link” Safety Harness
Safety Harness Vestype
314
323. Horns
Signal Horn 380ml
Signal Horn 200ml
MaXtek Safety Blaster Horn
MaXtek Dual Trumpet Stainless
Steel Horn
MaXtek Single Trumpet Stainless
Steel Horn
Horn
Refill Canister 380ml
Refill Canister 200ml
Mega Horn
Megaphone w Siren , 20W , 400m
Horn Stainless Steel - Round
324. EPIRB’s
McMurdo Smartfind G5 406Mhz
GPS EPIRB Auto
McMurdo Smartfind Plus/G5
406Mhz GPS EPIRB
McMurdo Fastfind 220 Mini PLB
McMurdo Grab Bag Small
McMurdo Grab Bag XL
326. Fire
Extinguisher
Chubb Marine 1.0kg - Dry Powder
Fire Extinguisher
Chubb 2.3Kg Dry Powder Fire
Extinguisher
Chubb Fire Extinguisher 4.5 Kg - BE
Dry Chemical
Fire Blanket
327. Flare Packs
Flare Packs
Dinghy Flare Pack
Cruising Flare Pack
YNZ CAT 4 Flare Pack
Power Boat Flare Pack
Coastal Flare Pack
YNZ CAT 1 Flare Pack
S a f e t y - Inflatable Lifejackets
2014 Lalizas Sigma Lifejackets 150N, CE ISO 12402-3
This Sigma CE 150N lifejacket is an economic lifejacket available in auto and
manual versions. The ultra lightweight design makes it comfortable to wear and
its webbing system makes it a user-friendly lifejacket.
The inflatable bladder, which is manufactured from high visibility yellow fabric,
is folded into a nylon red valise with velcro closure and it is also equipped with
Lalizas retro reflective tapes and whistle. Features lifting loop and heavy duty Dring for easier rescue.
Transparent window allows visible indication as to the firing/arming status of the
jacket.Transparent area allows the user to check the operating head function.
* EUROPEAN QUALITY * EUROPEAN SAFETY *
This is the most popular style of lifejacket due to the fact you are not restricted.
Suits weights 50kg and above. Waist belt adjusts up to 150cm.
* Comfortable long wear option compared to foam life jackets
* Features a manual pull tab for inflation (1 inflate per bottle)., plus a mouth piece
for inflation/deflation).
* 170 Newtons of buoyancy when fully inflated
* CE ISO 12402-3 Approval
Part Numbers :
71097 - Manual
71095 - Manual Gas Inflate Lifejacket with D-ring
2014 Lalizas Sigma Auto Lifejackets 150N
* EUROPEAN QUALITY * EUROPEAN SAFETY *
* Comfortable long wear option compared to foam life jackets
* Features a manual pull tab for inflation (1 inflate per bottle)., plus a mouth piece for
inflation/deflation).
* 150 Newtons of buoyancy when fully inflated
* CE EN396 Approval
Part Numbers :
71096 - Auto Gas Inflate Lifejacket
71096-B - Black Auto Gas Inflate Lifejacket with Crotch strap
71094 - Auto Gas Inflate Lifejacket with D-ring
New 2014 Lalizas Sigma 71096-B
- Black Auto Gas Inflate Lifejacket
with Crotch strap
315
S a f e t y - Lifejackets
Lalizas Delta 150N, Inflatable Lifejacket Belt-Pack CE ISO 12402-3
A comfortable non-intrusive buoyancy aid ideally suited for paddle boarding.
This high quality belt-pack PFD is all you need. Clip it on around your waist, slide
the pouch around to your back. To deploy simply slide the pouch around to your
front, pull the tag and the jacket will automatically inflate. Pull the jacket over
your head.
The inflatable bladder, which is made of High Visibility Yellow fabric, is folded
into a nylon red valise with Velcro closure and it is also equipped with Lalizas
retro reflective tapes (70180) and whistle (70010, certified per ISO 12402-7 & 8).
They are provided with lifting loop for easier rescue.
Part Number : 71109
Lalizas Alpha Child’s Gas Inflate Lifejacket 150N, CE ISO 12402-3
The Alpha gas inflation lifejacket has been designed to offer affordable safety
for all. Its compact design, low weight, high quality construction. The Alpha
features one chamber which is inflated automatically.
The inflatable bladder, which is manufactured from high visibility yellow fabric,
is folded into a nylon red valise with velcro closure and it is also equipped with
Lalizas retro reflective tapes and whistle. Features lifting loop and heavy duty
D- ring for easier rescue.
* Made in Europe * EUROPEAN QUALITY * EUROPEAN SAFETY *
Alpha & Sigma Lifejacket features:
* CE ISO 12402-3 approval
* Reflective Tapes
* Twin welded air bladder seam for double security (Alpha only)
* Ultra reliable firing mechanism
* Compatible with all major suppliers CO2 bottles
* Commercial heavy duty weight protective outer shell
* Easy re-packing
* Economical re-arming kits
* 170 Newtons of buoyancy when fully inflated
* Maintain the correct flotation position in the water (face-up)
* Fully adjustable sizes
* Buoyancy 150N
Part Number : 71102 (Child’s Size Alpha - Auto inflate)
316
S a f e t y - Lifejackets
Lalizas Commercial SOLAS Lifejacket - Adult
Primarily aimed at the commercial market these cost efficient lifejackets have
been built to comply with the latest Solas 2010 safety standards.
These jackets are manufactured to equip all commercial vessels. They fully
comply with the requirements of the latest regulations (IMO Regulations). They
feature special ergonomic design which allow them to adjust easily to every size.
Suitable for all weather conditions. It is recommended to combine with a Lalizas
lifejacket light.
Designed for use by Adults with body weight from 43kg to 140kg
Chest Girth up to 1750mm
Dimensions: 50cm (L) x 35cm (W) x 13cm(D)
Part Number : 70178
Lalizas SOLAS ‘74 Life Jacket
Commercial grade lifejacket manufactured in accordance with
SOLAS 74 requirements. Basic “yoke style” floatation designed
to support an unconscious person and right them so their face
is out of the water. Orange
colour with signal whistle.
Meets solas 74 requirements for
Type I floatation on commercial
vessels.
An ideal economical jacket for
recreational use.
Buoyancy (N): 95
Body Weight (Kg): >55
Part Number : 70159
Ski Buoyancy Aid CE 50N
* Equipped with a three buckle closure system using 45mm
webbing straps.
* High quality construction
coupled with extra side and
chest buoyancy.
* Provides the added protection
required by extreme water
sports enthusiasts.
Buoyancy (N): 75
Body Weight (Kg): >70
Chest Size: (cm): 115-130
Part Number : 20294
Lalizas Childs Lifejacket Chico CE 100N
New Lalizas Chico lifejacket provides a good fit and maximum safety.
Fun life jacket for small children featuring a colourful marine print.
Chico lifejacket provides a good fit and maximum safety.
A large floatation collar supports the child’s head and has a built-in-grab strap to
aid recovery. An adjustable waist belt and a crotch strap keep the vest securely in
place whilst in the water.
It is available in orange and yellow.
This Lalizas Chico lifejacket is approved to European Standards. (ISO 12402-4)
Part Numbers :
71073 - Lalizas Chico Lifejacket 15-30kg (Buoyancy 45Nt)
71074 - Lalizas Chico Lifejacket 30-40kg (Buoyancy 55Nt)
317
S a f e t y - Lifejackets & Accessories
Pet Retriever Buoyancy Aid & Harness
Keep your pet safe on board with the Lalizas Pet Retriever. Buoyancy aid and Harness.
The Lalizas Pet Retriever features a foam construction buoyancy aid and strong lifting loop to enable
you to retrieve your pet.
Suitable for both dogs and cats. Available in three sizes.
Part Numbers :
20020 for Pets under 8 kg
20021 for Pets 8-15kg
20022 for Pets 15-40kg
Manual Re-arm Kit
Manual Re-arm Kit
(Adult’s Lifejacket 33g CO2)
2 x cylinders in each kit.
Part Number : 20160
Auto Re-arm Kit
Auto Re-arm Kit
for JS1 Inflator
(Adults Lifejacket) 33gr
Part Number : 20190
Auto Re-arm Kit for Child’s
Lifejacket (JS1)
A replacement 22gr CO2 gas cylinder and
automatic firing inflator for use with Lalizas
Alpha child lifejackets.
Part Number : 20200
LED floating Lifebuoy light
Very compact lifebuoy light, low
power consumption.
LED-type flashlight, operates on one
D size battery
360° arc of visibility.
Dimensions : 160 x 80 x 80 mm.
Weight : 90 g. (without battery).
Lifejacket Flashing Light - Water
Activated
- LED Flashlight Technology
- Water Activated
- Inspection friendly label
- Funtions only when in-water*
* Guarantees protection against the unnecessary use and battery
loss, out of the water.
“Safelite II” Functions
1. WATER ACTIVATED AUTO-ON: The Safelight II is activated
automatically, when it comes in contact with water.
2. MANUAL-OFF (In-Water Function Only): While in use, by
pressing the ON/OFF button the Safelight II will switch-off, to
save battery.
3. MANUAL-ON (In-Water Function Only): While switched-off,
by pressing the ON/OFF button, the Safelight II will switch-on.
Specifications
- Extra powerful LED light, for lower consumption and longer life
- Quick and easy installation with two moves.
- Fits and locks with every 20-40mm lifejacket belt, providing
security and stability against sudden panic moves.
- Lithium battery with 5 year lifetime, from the indicated
production date and more than 8 hours of continuous use.
- Waterproof.
Part Number : 71209
Harness & Lifejacket Crotch Strap
The crotch strap can be used
with all Lalizas lifejackets /
buoyancy aids and harnesses
Part Number : 20210
Lifebuoy Light Mounting Bracket
Nylon bracket to securely hold
the 196482 Lifebuoy Light
* Light Intensity: 2 candela
* Duration: Approx 8 hours at 60
flash/minute.
Attach to rails from 3/4” to 1”
or can be screwed direct onto
a bulkhead.
Part Number : 196482
Part Number : 196482MOUNT
318
S a f e t y - Man Overboard safety Equipment
Lifebuoy Ring SOLAS with Reflective Tape
Designed for pleasure and commercial usage, features an orange, rack hard,
cross- linked polyethylene outer shell that will not deteriorate and is unaffected
by extreme weather conditions. CE approved to SOLAS (L.S.A Code)* by G.L.
Hamburg.
730mm ext Ø, 440mm int Ø, 105mm H
Part Numbers : 70090
70110
91670
(2.5 kg)
(4 kg)
(Stainless Steel Life Ring Holder)
Lalizas Horseshoe Lifebuoy Basic I
Lalizas Horseshoe Lifebuoy Basic I consists of a flexible zipper cover and
features a plastic clip fastening.
Dimensions:
500mm(W) x 500mm(H) x 100mm (Thickness)
Part Numbers : 20530 (orange)
20540
(white)
20550
(yellow)
20580 (Stainless SteelBracket with light holder)
Life Saving Float - 4 person
Life Saving Apparatus (Plastic)
- For use on sail or motor boats
- Outer cover made of high strength polyethylene with an inner polystyrene
filling
- Complete with all-round rope lifeline
- 4 person model
- High visibility orange
- Approved to EEP. Approval number: 4232/46/00
Part Number : 70131
Life Ring Holder
This holder is ideal for placing and storing your ring
or horseshoe lifebuoy. It comes with a plastic holder,
which makes it easy to mount onto your boat’s rails.
It is made of stainless steel and comes with a small
elastic stretch cord for keeping the lifebuoy steady.
You can also store the lifebuoy light
since it features plastic clips on the
base of the holder.
Part Number : 95733
Plastic Holder for Life Ring
Part Numbers :
01106 (single piece)
01107 (set of 3 pieces)
Throwing Ring with 30m Floating Rope
Throwing Ring (Ø 175mm) with 30m Floating Rope
Designed for the retrieval of MOB,
the ring is moulded in PVC, weighing
only 250gr, and it is tied to a 30metre
floating rope.
Part Number : 20693
319
S a f e t y - Safety Ladders & Day Signs
Flushmount Safety Ladder
Safety Ladder
Helps any crew member get back on board
easily without external help.
Designed to
increase safety on
board, this ladder comes
in a canvas bag with 2
handles:
one handle to
attach the bag
alongside the boat; the
other handle for the man
fallen overboard to grab.
Suitable for bathing or in case of Man Over Board.
Consists of 3 polypropylene steps and 1 stainless steel
handle assembled by a highly resistant line (bright yellow
3mm polyester)
Ladder is stored in a polyamide tube with a grey
polypropylene cap, for optimum protection and
waterproofness.
The bag pulls open
and the ladder unfolds
instantly, helping the
person to get back on
board easily.
The Man Over Board removes the cap, pulls the ladder
down, and climbs onboard.
* Light weight
* Very easy Flush Mount
* Transom or skirt Mount,
just above waterline
Part Number : 29008
Part Number : 51558
Radar Reflector
Kayak Safety Kit and Bailer
Safety Bailer Kit suitable for all small boats incliding kayaks.
* Emergency 1.5 Ltr Bailer: Built in ergonomic handle
* Throw rope (50ft Poly rope and orange float)
* Rubberized AA torch (Batteries not included)
* Whistle for attracting attention
* Signal mirror with target sight hole
* Navigation compass, liquid damped
Features:
* Bailer mouth designed for round and square boat hulls
* Waterproof and air tight container, with 0-ring sealed lid
* Bright colour for easy sighting in an emergency
* Kit floats and includes security lanyard
Part Number : SW22101
Complies with the R.O.R.C
* 300 x 300 x 415mm
* Folds Flat for storage
Part Number : 9300
Motoring Cone - Day Sign
Internationally recognised for use when at
anchor.
• Folds flat for easy stowage
• Base 330mm x Height 470mm
Part Number : 9319
Anchor Ball - Day Sign
Internationally recognised for use when
at anchor.
* 30cm Diameter
* Folds Flat for storage
Part Number : 9320
320
S a f e t y - Harnesses
Single Hook Safety Line - 1.5m
Approved to EN 1095. The double action hook design prevents accidental opening
whilst still offering superb single handed operation. The hook is also fully approved
to EN 362.
Length: 150 cm
Part Number : 20400
Twin Hook Safety Line - 1.85m
Approved to EN 1095. The double action hook design prevents accidental
opening whilst still offering superb single handed operation. The hook is
also fully approved to EN 362.
Length: 185 cm
Part Number : 20410
Twin Hook Safety Line Elastic - 1.20/1.77m
Approved to EN 1095. The double action hook design prevents accidental opening whilst still
offering superb single handed operation.
The hook is also fully approved to EN 362.
The elastic line contained in the 20420 is constructed to break when too much weight is lifted,
thus indicating that the line must be replaced.
Length: 120 to 177 cm
Part Number : 20420
Triple Hook Safety Line - 1.20/1.77m
Approved to EN 1095. Double action hook design prevents accidental opening whilst still
offering superb single handed operation.
The hook is fully approved to EN 362.
Part Number : 20430
Harness & Lifejacket Crotch Strap
The crotch strap can be used with all Lalizas lifejackets / bouyancy aids and
harnesses.
Part Number : 20210
321
S a f e t y - Harnesses, Bosun’s Chairs & Safety Horns
Lalizas Safety Bosun’s Chair
This bosun’s chair is made of reinforced Nylon 210D with PVC backing, 0,35mm thick. It comes complete with
safety straps for added security, fitted side pockets for tools and a padded wooden seat. LALIZAS offers you
a bosun’s chair to allow you to work comfortably, safely and in balance.
Part Number : 10080L
Lalizas Professional Bosun’s Chair
Lalizas Professional Bosun’s Chair has been designed according to the highest quality standards, so that it can
be used easily by professionals.
1) Reinforced Nylon with PVC backing and PP webbing
2) Supreme comfort for extended time aloft
3) Comfortable wrap-around back
4) Adjustable strap between the legs for extra safety
5) Stows in its own bag,
6) Attached side tool case
7) Pocket to fit an optional wooden seat (Part Number: 00169)
8) Retro reflective tapes for better visibility
9) Floats in the water when it is empty
Part Number : 10210
Lalizas “Life-link” Safety Harness
The Life-link safety harness is approved to pr EN 1095 its features include a heavy duty stainless steel
inter-locking buckle and ‘D’ ring, fully adjustable waist band, retro reflective patch and toggle fastening to fit
most full weather gear.
* Adult Harness fits waists 80cm to 140cm
* Child Harness fits waists 40cm to 80cm
Part Numbers : 20370 (Adult)
20380 (Child)
Safety Harness Vestype
Highly Visible Safety Harness with Chest D-Ring
Part Number : 71152
Signal Horn 380ml
Refill Canister 380ml
Acoustic range approximately
1500m
Screw type fitting
Screw Type Fitting,
Refill Canister 380ml
Suits 10033 Horn
Part Number : 10033
Part Number : 10032
322
S a f e t y - Horns
Signal Horn 200ml
The Echo200 is a handy easy to use device for signalling your
position in fog, rescue or any
emergency situation.
* Acoustic range approx 1500m
* Removable horn
* Set includes Horn Trumpet and
Canister
* CE Rated
Part Number : 11506
MaXtek Safety Blaster Horn
Refill Canister 200ml
For pressure fit horn
Refill Canister 200ml
Suits Echo200 Horn
Part Number : 11505
Mega Horn
Whether you use Mega Horn in an
emergency or for pleasure you
certainly will be heard.
MaXtek Safety Blaster Horn can produce a 120dB call which
can be heard up to 1 mile away.
Red colour, Floating, non corrosive. Friendly
to the environment.
Sound measures at least 105 D.B.
Part Number : 15007 (Blister Packed)
Part Number : 10040L
Lalizas Whistle - Orange
Used for attaching to LifeJackets and other Man Overboard
safety equipment
ISO 12402-8 CE
Part Number : 70020
MaXtek Dual Trumpet Stainless
Steel Horn
400HZ +/- 15, 350HZ
+/- 15
105 +/- 5dB
460mm long
Part Numbers :
15023 (12 Volt)
15023-24 (24 Volt)
15023-BP (12 Volt Blister Pack)
MaXtek Single Trumpet Stainless
Steel Horn
12 or 24 Volt
450 x 90mm
Part Numbers :
15011-12 (12 Volt)
15011-12-BP (12 Volt Blister Pack)
15013-24 (24 Volt)
Megaphone w Siren , 20W , 400m
Power: 20W
Sound Coverage: 400m
approx.
Function: Talk/Siren
Batteries: 6D
ABS Housing
Diameter: 200mm
Length: 350mm
Part Number : 90168
MaXtek Horn Stainless Steel - Round
12 Volt
3” Diameter , 2” High
Part Numbers :
15035
15035-BP (Blister Packed)
323
S a f e t y - EPIRBs
Emergency Position Indicating Radio Beacons (EPIRBs) are essential on your list of safety gear. When
activated they last for at least 24 hours and work day and night. Our personal EPIRB’s also offer hunters and
trampers security in the bush.
McMurdo Smartfind G5 406Mhz GPS EPIRB Auto
McMurdo Smartfind Plus/G5 406Mhz GPS EPIRB - Auto Float Free Housing
The Auto Float Free Housing meets SOLAS requirements and will automatically deploy the EPIRB when
submerged to a depth lower than 2 - 4metres in the sea.
The addition of a GPS receiver to the EPIRB ensures that the exact
position of a casualty is relayed to the rescue services. This can in
turn improve the speed of recovery by updating the position of the
beacon at regular intervals.
Features:
Will transmit for a minimum of 48 hours
5 year warranty*
5 year battery life*
Product Accessories
HRU Replacement Kit
Carry Safe Manual Bracket
Part Number : G5EPIRBAUTO
McMurdo Grab Bag Small
McMurdo Grab Bag XL
Waterproof and buoyant it has
plenty of space for emergency
equipment survival supplies.
McMurdo Grab Bag XL is made from the same high quality
material as our standard grab bag. The XL version has an
external EPIRB pouch, and flare stowage pockets.
* High visibility
* Buoyant
* Waterproof
* Buoyant
* Waterproof
* Watertight zip and Velcro
* Carry handles and
shoulder strap
Part Number : 87-300
Part Number :
GRABBAGXL
324
S a f e t y - EPIRBs
McMurdo Smartfind Plus/G5 406Mhz GPS EPIRB
The G5 SMARTFIND PLUS has all the advanced features of the standard E5 SMARTFIND with
the addition of an integral 12 channel GPS receiver. The addition of a GPS receiver to the EPIRB
ensures that the exact position of a casualty is relayed to the rescue services.
This incorporation of positional information overcomes the location problem when using
geostationary satellites and can greatly reduce the time it takes for the SAR authorities to arrive
on the scene.
Features:
High brightness LED flashing locator lights
Will transmit for a minimum of 48 hours
5 year warranty* 5 year battery life*
Product Accessories H R U Replacement Kit
Manual Release Bracket
Part Number : 87-302
McMurdo Fastfind 220 Mini PLB
The Fast Find 220 is a 406 MHz Personal Location Beacon (PLB) that should be carried by
individuals, who are embarking on trips into areas around the world where there is little or no
other form of communication or where other forms of communication are unlikely to work. The Fast
Find acts as your personal Emergency Location Beacon, it is your last resort communication to the
national and international search and rescue bodies and it should not be mis-used. The Fast Find is
designed as a direct communication, to the 406 MHz Search and Rescue satellite system, its signal
indicates that you are in need of urgent response and assistance.
Its small size belies its rugged construction and powerful output. There is no compromise. Once
activated, the distress beacon will obtain a GPS position, send out a signal for help, and continue
to transmit for at least 24 hours, at a powerful 5 watt output, ensuring that your call for help gets
through whatever the conditions.
The Fast Find weighs just 5.3 oz (150g) and measures D 34mm x W 47mm x L 106mm.
Part Number : 87-304
325
S a f e t y - Fire Equipment
Chubb Marine 1.0kg - Dry Powder Fire Extinguisher
These non toxic dry chemical powder extinguishers have been tested to ensure they can
suppress different types of fire with quick flame knockdown, indicated by the class rating
1A:10B:E
The A:B:E rated extinguisher can be used on fires involving wood, paper, fabric, carpet,
flammable liquid and electrical based fires.
This extinguisher complies with the stringent Australian Standards.
Chubb extinguishers are warranted against faults in materials and workmanship for
six years when installed and maintained by Chubb in accordance with the appropriate
Australian and NZ standards.
Applications: Vehicle, Boat, Caravan, Home, Garage and Workshop
Part Number : CHUBB1KG
Chubb 2.3Kg Dry Powder Fire Extinguisher
The “ABE” can be used on fires involving wood, paper, flammable liquid and live electrical
equipment. This extinguisher complies with the stringent Australian Standards. Your Chubb
extinguishers are warranted against faults in materials and workmanship for six years when
installed and maintained by Chubb in accordance with the appropriate Australian and NZ
standards.
Applications: Electrical switchboards, Buses and Garages
Part Number : CHUBB2.3
Chubb Fire Extinguisher 4.5 Kg - BE Dry Chemical
The “BE” dry chemical extinguisher can be used on fires involving flammable liquids and live
electrical equipment. The high performance BCX powder offers the same knock-out capacity as
conventional 9.0kg dry powder extinguisher.
Applications: Mining vehicles: Cargo Carriers, Light Industry, Boat, Caravans and Workshops
Part Number : CHUBB4.5
Fire Blanket
Essential in high-risk areas, such as the kitchen are fire blankets.
The model offered is 90x90cm wide and is supplied in a rigid case, with
instructions printed on top.
Part Number : 70448
326
S a f e t y - Flare Packs
Flare Packs
The most reliable pyrotechnic distress signals - SOLAS approved and manufactured to ISO 9001 standard.
Dinghy Flare Pack
Power Boat Flare Pack
Pack in waterproof container.
Pack in waterproof container.
Contains:
2 x red hand flares
1 x orange smoke torch
Contains: 3 x red hand flares
Part Number : PPAK27041
Part Number : PPAK27040
Cruising Flare Pack
Coastal Flare Pack
Waterproof container.
Contains:
1 x parachute distress rocket
2 x red hand flares
1 x orange smoke torch
Waterproof container.
Contains:
2 x parachute distress rocket
2 x red hand flares
2 x orange smoke torch
Part Number : PPAK27023
Part Number : PPAK27022
YNZ CAT 4 Flare Pack
YNZ CAT 1 Flare Pack
Waterproof container
Contains:
2 x red hand flares
2 x white hand flares
2 x orange smoke torch
Waterproof container
Contains:
4 x parachute distress rockets
2 x red hand flares
2 x white hand flares
2 x orange smoke torch
Part Number : PPAK27018
Part Number : PPAK27017
327
S e a t s & Ta b l e s
330. Seats &
Cushions
Seat with Flip Up Leg Bolster
Rhyder High Back Seat
Floating Boat Cushion - Double
Classic Marine Boat Seat
Rhyder Cruiser Seat
Buoyant Deck Cushion - Single
Crew Folding Padded Seat
Fisherman Fold Down Seat
Crew Folding Padded Seat with
Drink Holder
Crew Folding Padded Seat - Grey
Fisherman Deluxe Fold Down Seat
- Swivel Mount
Seat Swivel - Powder Coated Steel
Aluminium Seat Swivel
Seat Pedestal Fixed
334. Tables &
Pedestals
Table Pedestal - 316 Stainless Steel
Round Table Top
Adjustable Height
Stainless Steel Table Bracket
Table Pedestal
Square / Rectangular Table Top
Flush style mount for Pedestal base
Surface mount for Pedestal base
332. Seat & Table
Pedestals
Universal Seat Trac-Lock Slider
Fixed Seat Pedestal - 300mm
Adjustable Seat Pedestal 480633mm
Flush Mount Adjustable Seat
Pedestal 473-600mm
Adjustable Seat Pedestal 500750mm
Seat Pedestal Gas Adjust
Seat Pedestal Gas Adjust 18” - 24”
Seat Pedestal Fixed
Seat Pedestal Adjustable
Surface Mount for SS Pedestal
Flush Mount for SS Pedestal
Table Pedestal
Table Pedestal Set - Removable
Table Pedestal – 316 Stainless
Steel
329
S e a t s & T a b l e s - Seats & Cushions
Seat with Flip Up Leg Bolster
Classic Marine Boat Seat
This seat has a cushioned leg bolster that folds up and back for
when you are standing at the helm.
High grade UV resistant marine upholstery.
* Heavy duty marine grade vinyl with high density foam
* Corrosion-resistant hinge
* Colours: White/Navy (as pictured), Black/Grey and Blue/Grey
Dimensions: 650 (D) x 500 (H) x 530mm (W)
Durable, injection-moulded plastic seat frame.
High-compression foam padding for comfort
Dimensions (mm):
620 (w) x 660 (d) x 660 (h)
Part Numbers :
S120 - White/Navy
S120B - Black/Grey
S120BL-Blue/Grey
Part Number : S09
Floating Boat Cushion - Double
Buoyant Deck Cushion - Single
Buoyant deck cushions
Waterproof outer material and are filled with polyethylene
foam. There are integral straps around the cushions so as to
carry them easily and quickly. The cushions lock on your boat
through a nylon hook at their back.
Dimensions:
400 x 400 x 65mm
Buoyancy: 9kg
Weight: 0.55kg-0.6kg
White cushions are made of PVC, while red blue and cushions
are made of polyester with PVC overlay.
Dimensions: 830mm x 400mm x 65mm
Buoyancy: 19kg
Weight: 1.2kg-1.25kg
Part Numbers: 11512 - White
11514 - Red 11516 - Blue
330
Part Numbers :
11511 - White
11515L - Blue
S e a t s & T a b l e s - Seats & Swivels
Crew Folding Padded Seat
UV and mold-resistant seats
Maintenance free,
Thermo moulded plastic
Suits standard square base
mounts.
Part Numbers :S001R - Light Grey/Red
S001B - Blue/Grey
Crew Folding Padded Seat with
Drink Holder
Drink Holder supplied
separately and requires
assembly. (Requires two SS
Screws; not supplied)
Suits standard square base
mounts.
Fisherman Deluxe Fold Down Seat Swivel Mount
High-impact injection
moulded frames, anodised
aluminium hinges and
heavy grade UV resistant
marine upholstery.
These seats fold down flat
when not in use.
Part Number : S10B
Fisherman Fold Down Seat
Suits standard square base
mounts.
Part Number : S10
Part Number : S002
Crew Folding Padded Seat - Grey
Suits standard square base
mounts.
Part Number : S001
Aluminium Seat Swivel
Constructed from high
tensile H321
alloy for maximum
corrosion-resistance
and durability.
4-hole pattern for
easy mounting.
Allows smooth easy 360º rotation of the seat.
* Made in NZ
* Corrosion Resistant
Dimensions 170 x 170 x 22mm
138mm mounting hole centres (Adjustable)
Seat Swivel - Powder Coated Steel
360º seat swivel manufactured from powder coated steel. Budget
swivel with nylon slide runners for silent smooth operation.
Black, powder coated steel
Nylon Slide Runners
Swivels 360º
Hole pattern fits most seats
Dimensions: 152mm (l) x (w)
8mm mounting holes
Part Number : 4488
Universal Seat Trac-Lock Slider
Convert your existing marine seat into an adjustable sliding seat.
With universal mounting holes this can easily be installed on to a
fixed pedestal or mounting frame.
• Large 178mm (W) x 330mm (L) x 50mm (H), 0-Degree Platform
• High-Strength Aluminium
• Travels 130mm Forwards and Backwards
Part Number : 50105
Part Number : 4487
331
S e a t s & T a b l e s - Seats Pedestals
Fixed Seat Pedestal - 300mm
Seat Pedestal Gas Adjust 380-510mm
Aluminium Seat Pedestal; fixed 300mm vertical height
Premium grade Seat Pedestal with pressurised gas adjustment.
Built for the salt water environment
and constructed from anodised
aluminium with a heavy duty
die-cast alloy base. 360º rotational
swivel with lock.
Mounting base suits countersunk
screws or hex nuts.
*Gas soft ride pedestal – 380 – 510mm
*Back /Forward slide controls
*Full height control from 380 – 510mm
360º swivel control
Part Number : S134
Part Number : S136
Adjustable Seat Pedestal 480-633mm
Telescopic height adjustment makes
this pedestal suitable for either a
helm seat or converting dinettes into
bunks.
Seat Pedestal Gas Adjust 530 - 710mm
Premium grade Seat Pedestal with pressurised gas adjustment.
Manufactured from corrosion
resistant materials; anodised
aluminium, glass filled nylon and
stainless steel. Solid construction
with wide 230mm alloy floor base.
*Finger tip control of height control
*Seat forward and back control slider
*Alloy construction
*Premim grade with sturdy 300mm
diameter base
Seat base has 360º swivel control.
Height: adjusts from 530 - 710mm
(21” to 28”)
Mounting base suits countersunk
screws or hex head. Accepts 50105
seat slide.
Part Number : S132
Part Number : S138
Adjustable Seat Pedestal 500-750mm
Aluminium Seat Pedestal with vertical height adjustment and
rotational swivel
Strong adjustable pedestal Telescopic 500-750mm
* Built for the salt water environment
* Anodised aluminium construction
and stainless steel materials
* Heavy duty die-cast alloy base
* Cast alloy seat base
* Strong Extruded aluminium tube
* Alloy swivel with rotational lock
Mounting base suits countersunk
screws or hex nuts.
Part Number : S142
332
Flush Mount Adjustable Seat Pedestal
473-600mm
Aluminium Seat Pedestal with height adjustment and 360º swivel
control. Built for the salt water environment.
Seat can be adjusted in height from 480-633mm in 5 stages.
Professional installation can be achieved as mounting base sits
flush within the floor cavity.
* Flush mounting
* Aluminium Seat connector
* 5 height adjustments
* 360º seat rotation with lock
* Anodised aluminium construction
* Heavy duty die-cast alloy base
and extruded aluminium tube
Part Number : S140
S e a t s & T a b l e s - Seat & Table Pedestals
Seat Pedestal Gas Adjust 455 - 625mm Table Pedestal
Softrider Seat Pedestal Gas Adjust
Height is fully adjustable between 455 - 625mm. Seat back and
forwards control with robust slider.
Full 360º swivel control.
Dimensions:
Base Diameter: 230mm (9”)
Overall Height: 455mm lowered
or 625mm raised.
Part Number : S144
Chromed Steel Table Pedestal
(710mm long) with Aluminium Base and
Top
Part numbers :
54019 - Chromed steel pedestal
54017 - Aluminium Top mount
54018 - Aluminium Flush mount base for
floor mounting.
Complete Part Number : 54020
Seat Pedestal Fixed
Table Pedestal Set - Removable
Stainless Steel
Aluminium pedestal which has a lock
mechanism at the base. Quick release allows
for easy removal and stowage of the table.
*Seat not included (just shown in
pictures as example of use)
Part Number : 4482
Seat Pedestal Adjustable
Stainless Steel
Height Adjustable
*Seat not included (just shown in
pictures as example of use)
Part Number : 4480
Surface Mount for SS Pedestal
Dimensions:
Diameter 163mm
Suits pedestal tube diameter 50mm tapers
to 46mm
Part Number : 4484S
Flush Mount for SS Pedestal
Dimensions:
Diameter 162mm
Suits pedestal tube diameter 50mm
tapers to 46mm
Required depth under floor surface 45mm
Dimensions:
Total Height: 730mm
Height from base to underside of table:
675mm
Pole Diameter: 60mm
Recess Diameter 100mm
Plate Diameter Top: 178mm
Base Diameter: 178mm
Part Number : 54014
Table Pedestal - 316
Stainless Steel
Includes top and bottom plates for fixing to the
underside of your table top and flush mounting
to the floor.
Pedestal is completely removable.
Dimensions:
Height from floor to underside of table 690mm
Pedestal tube diameter 60mm
Required depth under floor surface 45mm
Part Number : 4484
Part Number : 4484F
333
S e a t s & T a b l e s - Tables & Pedestals
Round Table Top & Pedestal
Swivel Table Frame
Round Table complete with anodised pedestal and surface mount
base attachment. Pedestal screws into the base and can easily be
removed.
Low profile base screws to the floor and remains when pedestal
removed.
The versatile space-saving Swivel Table Frame. Everything you
need to mount your existing table top onto and give yourself
extra space.
Two models available with either surface or flush mounts.
*Non corrosive aluminium pedestal
*Drink Holders
*Easily stowed
1 x Table Frame
1 x Mount plate
1 x Backing Plate to use behind the bench seat frame.
Stainless steel nuts and bolts.
Screws to mount your Table top onto the frame.
Part Number : 4492
Table height on Pedestal: 720mm
Flush mounts (requires 45mm depth)
Part Numbers :
4496RF - Flush mount
4496RS - Surface mount
Square / Rectangular Table Top
700 (L) X
500mm (W)
Pedestal sold
separately
Part Number : 4496SQ
Oval Table & Pedestal - Flush Mount
Oval shaped table complete with anodised pedestal and flush
mount base attachment. Pedestal sits inside flush base mount and
can easily be removed.
Table has four inserts for drink holders.
Requires mounting depth below floor.
*Non corrosive aluminium pedestal
*Drink Holders
*Easily stowed
Table height on Pedestal:
720mm
Table dimensions: 610mm x
460mm
Part Number : 4490F
Stainless Steel Table Bracket
Dimensions:
300 x 165 x 25mm
Part Number : 54016
334
Adjustable Height
Table Pedestal
Telescopic 400-730mm
Pedestal only.
Part Number : 4498
Flush style mount for Pedestal base
“Flush” mounts into the floor and Table Pedestal screws into this
base.
Part Number : 4501
Surface mount for Pedestal base
Mount onto the bottom of your table and screw onto the pedestal.
Part Number : 4502
Tra i l e r C o m p o n e n t s
337. Jockey
Wheels
Jockey Wheel CP15SH
Jockey Wheel CP14SH
Jockey Wheel CP14S
Jockey Wheel CP2
Jockey Wheel - Lalizas
Jockey Wheel CP15S
Jockey Wheel Clamp On CP14
Jockey Wheel CP6S
Jockey Wheel CP1S
Jockey Wheel Fixed CP3
Jockey Wheel Fixed CP7
338. Stoltz Trailer
Rollers
Stoltz Trailer Roller RP-8
Stoltz Trailer Keel Roller RP-10
Stoltz Trailer Keel Roller RP-12
Stoltz Anchor Roller RP444
Stoltz RP404 Vee Bow Stop
Stoltz RP-3 Vee Bow Stop
339. Trailer Rollers
Snubber - Vee Bow Chock
Snubber - Vee Bow Chock - 100mm
3” Bow Roller - Yellow Poly Vinyl
4” Bow Roller - Yellow Poly Vinyl
3” Bow Roller - Black Rubber
Spool Roller – Black – 100mm x
75mm
Spool Roller – Yellow – 100mm x
69mm
Keel Roller – Black – 185mm x
85mm
Snubber - Cotton Reel Style Bow
Chock
Self-Centring Keel Roller– Yellow –
290mm x 75mm
Side Guide Roller
336
340. Trailer
Accessories
MaXtek Bearing Protectors S/S
(pair)
Tow Ball 1-7/8”
Camco Wheel Chock with Rope
Hella DuraLed Cab Marker/
Supplementary Side Indicator
Hella DuraLed Front End Outline
Lamp
LED Waterproof Trailer Light
Outboard Flag
Tarp Clamps
Trailer Connector Female
Trailer Connector Male
Nylon Strap
Winch Wire / Cable
342. Trojan Trailer
Accessories
Trojan Defender Wheel Clamps
Trojan Jockey Wheel
Trojan Bearing Boss – Stainless
Steel
Trojan LED submersible
Combination Lights – Multi volt
Trojan LED Marker Light – Multi
volt
Plug Holder
Trojan Winch Ropes
Trojan Safety Chain Kits
Trojan Level Coupling - 2000kg
capacity
Trojan Duofit Coupling - 2500kg
capacity
Mudguards – Galvanised steel
Mudguards – Plastic
Trojan Towballs
Trojan Duo-Balls
Trojan Chain Mate
Trojan Chrome Towball Covers
Trojan Rubber Shin Protectors
346. Trailer
Winches
Winch 15-1 Reduction - CPW15
Winch 5-1 Reduction - CPW5
Winch 1-1 Direct - CPW1
Winch 10-1 Reduction - CPW10
Winch 3-1 Reduction - CPW3
Winch Handle - Spare
Winch 3:1 Reduction with 4.5m
Nylon Strap
T r a i l e r C o m p o n e n t s - Jockey Wheels
Jockey Wheel
CP15SH
* Swivel Type Twin Wheel
* 250X4 Solid Rubber Wheels
* Full 250mm Adjustment
* 500KG Capacity
Jockey Wheel CP15S
* Swivel Type Twin Wheel
* 300X4 Pneumatic Wheels
* Full 300mm Adjustment
* 440KG Capacity
Part Number : 8418
Part Number : 8418-SH
Jockey Wheel CP14SH
* Swivel Type
* 250X4 Solid Rubber Wheel
* Full 300mm Adjustment
* 250KG Capacity
Part Number : 8416-SH
Jockey Wheel Clamp On CP14
* Swivel Type
* 250X4 Solid Rubber Wheel
* 250mm adjustment
* 220KG Capacity
Part Number : 8419
Jockey Wheel CP14S
Jockey Wheel CP6S
* Swivel Type
* 250X4 Solid Rubber Wheel
* 250mm Adjustment
* 220KG Capacity
* Swivel Type
* 300X4 Pneumatic Wheel
* 250mm Adjustment
* 220KG Capacity
Part Number : 8416
Part Number : 8405
Jockey Wheel CP2
Jockey Wheel CP1S
* Swivel Type
* 150 x 50mm Solid rubber wheel
* 250mm Adjustment
* 150KG Capacity
* Swivel Type
* 250X4 Pneumatic Wheel
* 250mm Adjustment
* 150KG Capacity
Part Number : 8414
Part Number : 8415
Jockey Wheel Fixed CP7
Jockey Wheel Fixed CP3
* Wheel and Yoke
* 6X2 Solid Rubber Wheel
* 150KG Capacity
* With Butterfly and Pin
* Wheel and Yoke
* 300X4 Pneumatic Wheel
* 220KG Capacity
* With Butterfly and Pin
Part Number : 8417
Part Number : 8406
Jockey Wheel - Lalizas
* 250mm Adjustment
* 200 x 50mm Solid
Rubber Wheel
* 360KG Capacity
Part Number : 99634
337
T r a i l e r C o m p o n e n t s - Trailer Rollers & Accessories
Stoltz Rollers
Insist on Stoltz Rollers on your boat trailer! Don’t put up with ugly marks on the hull of your boat.
Stoltz Boat Trailer Rollers and Bow Stops are the highest quality poly rollers on the market. MADE IN THE USA and manufactured for
long lasting performance and to protect your boat and keep the hull looking new! Stoltz Boat Trailer Rollers use High Quality Materials in
production to prevent discoloration, weather cracking, and marking up your boat hull.
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion resistance
* Extremely cut resistant
* Made in the USA
Trailer Roller RP-8
Trailer Keel Roller RP-10
Replacement roller for trailer keel roller assembly
Replacement roller for trailer keel roller assembly
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
Length: 203mm (8”)
15mm shaft (5/8”)
Length: 254mm (10”)
15mm shaft (5/8”)
Part Number : 11024
Part Number : 11023
Trailer Keel Roller RP-12
Replacement roller for trailer keel roller assembly
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
Length: 305mm (12”)
15mm shaft (5/8”)
Part Number : 11026
RP404 Vee Bow Stop
Anchor Roller RP444
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
100mm width x
80mm diameter
1/2 inch shaft
Part Number : 11021
RP-3 Vee Bow Stop
Stoltz Vee Bow Stop fits 100mm wide bracket
Stoltz Vee Bow Stop fits 75mm wide racket
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
* Guaranteed to outlast any other roller on the market
* NEW U.V. stabilised formula
* Polyurethane construction offers superior cut and abrasion
resistance
* Extremely cut resistant
* Made in the USA
12mm shaft
Fits 100mm bracket (4”)
12mm shaft
Fits 75mm racket (3”)
Part Number : 11025
Part Number : 11022
338
T r a i l e r C o m p o n e n t s - Trailer Rollers & Accessories
Snubber - Vee Bow Chock
Snubber - Vee Bow Chock - 100mm
Hard Wearing, Non Marking, Black Rubber
Hard Wearing, Non Marking, Black Rubber
Jaw Opening: Approx 70º
Base Footprint: 150mm x 50mm
Bolt Hole Centres: 35mm x 128mm
Length: 100mm
Width: 100mm
12mm hole - designed to suit 1/2”
diameter pin
Part Number : N15
Part Number : N20
3” Bow Roller - Yellow Poly Vinyl
3” Bow Roller - Black Rubber
75mm width x
75mm diameter
1/2 inch shaft
77mm width x
75mm diameter
Part Number : N32
4” Bow Roller - Yellow Poly Vinyl
100mm width x
95mm diameter
1/2 inch shaft
Part Number : N30
Spool Roller – Yellow – 100mm x 69mm
Hard Wearing, Non Marking Poly Vinyl
Length: 100mm
Overall Diameter: 96mm
15mm hole - designed to suit 5/8”
diameter pin
Part Number : N21
Snubber - Cotton Reel Style Bow Chock
Hard Wearing, Non Marking, Black Rubber
Width: 75mm
Outer Diameter: 98mm
Inner Diameter: 32mm
Bolt Hole: 12.7mm
Part Number : N14
Spool Roller – Black – 100mm x 75mm
Hard Wearing, Non Marking, Black Rubber
Keel Roller – Black – 185mm x 85mm
Length: 100mm
Overall Diameter: 75mm
12mm hole - designed to suit 1/2”
diameter pin
Hard Wearing, Non Marking, Black Rubber
Part Number : N24
Part Number : N34
Length: 185mm
Overall Diameter: 85mm
15mm hole - designed to suit 5/8”
diameter pin
Part Number : N28
Side Guide Roller
Hard Wearing, Non Marking, Black Rubber
Length: 230mm
Width: 50mm
Bolt Hole: 12.7mm
Self-Centring Keel Roller– Yellow –
290mm x 75mm
Hard Wearing, Non Marking Poly Vinyl
Length: 290mm
Overall Diameter: 75mm
15mm hole - designed to suit
5/8” diameter pin
Part Number : N36
Part Number : N26
339
T r a i l e r C o m p o n e n t s - Accessories
MaXtek Bearing Protectors S/S (pair)
Stainless Steel Wheel Bearing Protectors
An excellent buddy for your trailer bearings. Simply remove the grease cap with
a tap of a hammer and replace with these protectors in its place.
Use a grease gun and pump the protector full of grease. The protector creates
positive pressure inside the bearing so that salt water cannot leak in and
contaminate the bearing. Supplied as a pair.
Features:
*Easy to install
*Stainless Steel construction
*Eliminate premature bearing failure from salt water entry
Part Numbers :
8410
8410-BP (Blister Packed)
Tow Ball 1-7/8”
Tow Ball 1-7/8” with a 3/4” Bolt
Rated Capacity: 2000kg
Part Number : 57552
Camco Wheel Chock with
Rope
Ideal for Campervans Trailer RV ‘s
and boats.
Made in the USA
Part Number : WHEELCHOCK
Hella DuraLed Cab Marker/
Supplementary Side Indicator
Surface mount amber cab marker
or supplementary side indicator
LED lamp.
Black plastic housing. Optic
appears clear until illuminated.
Reverse polarity and transient
spike circuit protecttion.
Pre-wired with 500mm of cable.
Complies with ADR.
Suitable for both 12 volt and 24 volt systems and uses less then 1
Watt.
Dimensions: 60mm (L) x 38mm (W) x 32mm (D)
Part Number : H2026
340
Hella DuraLed Front End Outline Lamp
Ultra high impact resistant surface mount amber LED front marker
lamp.Black plastic housing. Optic appears clear until illuminated.
Pre-wired with 500mm of cable.
Complies with ADR.
Suitable for both 12 volt and 24
volt systems and uses less then
1 Watt.
Dimensions: 60mm (L) x 38mm (W)
x 32mm (D)
Part Number : H2051GMD
T r a i l e r C o m p o n e n t s - Accessories
LED Waterproof Trailer Light
High visibilty trailer lights for use on trailers and trucks.
This light offers exceptional visibility, good physical size
and offers a long life solution to your trailer lights.
Never replace a bulb again!
Multi-function
Stop - Tail - Indicator - Reverse
Easy to install with mounting hardware supplied.
Features
* 72 LED’s, Thats 144 per pair
* Multi Voltage - 12 - 24v
* Low Power consumption
* Long Life
* Shockproof
* Fully waterproof and submersible
* Electronics encapulated with resin
* CE Rated
Part Number : 90006
Outboard Flag
Tarp Clamps
Fluro Orange Outboard flag
Optional LED Light for night time towing.
Rugged composite clip with
heavy-duty spring and bungee
cord. Ingenious design grips
tarps and sheeting tight without
the need to locate rope eyes.
The tighter the clip is pulled the
tighter it grips.
Simple to release
Suitable for use on boats, trucks, trailers, farm and garden.
Part Numbers :
OF (Outboard flag)
OFL (Outboard flag + LED light)
Part Number : 70206
Trailer Connector Female
Trailer Connector Male
Replacement 7 pin Female Trailer plug for connection to vehicle
and trailer.
Standard replacement 7 Pin Male Trailer plug for connection to
trailesr.
Part Number : 31341
Part Number : 31340
Winch Strap
Winch Wire / Cable
Loading: 2000 Kgs
Width: 50 mm
Replacement Winch Wire / Cable for a Trailer Boat Winch.
Part Numbers :
99093 - 6m
99094 - 7.5m
Made in NZ using premium grade wire and NZ made
U hooks.
Part Numbers : (dia x length)
9142 - 4mm x 5m
9143 - 4mm x 6m
9144 - 4mm x 7.5m
9145 - 5mm x 5m
9146 - 5mm x 6m
9147 - 5mm x 7.5m
341
T r a i l e r C o m p o n e n t s - Trojan Trailer Accessories
342
T r a i l e r C o m p o n e n t s - Trojan Trailer Accessories
343
T r a i l e r C o m p o n e n t s - Trojan Trailer Accessories
344
T r a i l e r C o m p o n e n t s - Trojan Trailer Accessories
345
T r a i l e r C o m p o n e n t s - Trailer Winches
Winch 15-1 Reduction - CPW15
Winch 10-1 Reduction - CPW10
* Winch 15-1 and 5-1
* EXTRA heavy Duty
* 2 x Handles
* Ideal for Larger Craft
* Max Pull 1650KG
* Winch 10-1 and 5-1
* Heavy Duty
* 2 x Handles
* Suit Larger Craft
* Max Pull 1150KG
Part Number : 9132
Part Number : 9130
Winch 5-1 Reduction - CPW5
Winch 3-1 Reduction - CPW3
* Winch 5-1 and 1-1
* Medium Zinc Plated
* Built for Long Life
* For Craft 14FT-19FT
* Max Pull 750KG
* Winch 3-1
* Small Zinc Plated
* For Light Craft
* Up to 14ft Length
* Max Pull 450KG
Part Number : 9125
Part Number : 9123
Winch 1-1 Direct - CPW1
Winch Handle - Spare
* Winch 1-1
* Small Zinc Plated
* For Small Craft
* Max Pull 260KG
* Replacement handle
for trailer winches.
Part Number : 9131
Part Number : 9121
Winch 3:1 Reduction with 4.5m Nylon Strap
Ideal trailer winch for small craft including dinghy’s and jetskis. One way ratchet which can be disengaged for winding out.
Nylon strap offers the best solution to haul your boat on to your trailer by far.
- Easy on the hands
- Run through your hands when retrieving your boat; no wires to cut and dig into your flesh
Features
* Zinc Plated to resist against corrosion
* Solid gear construction
* Internally lubricated drum and pinion gear bushings
* Smooth moulded winch handle
* Formed reinforcements in frame for added strength
* 360kg (850lb) Capacity
* 3:1 gear ratio
* 5 mounting holes within plate for easy mounting options
Dimensions
Strap length: 4.5m
Base plate 95mm (l) x 85mm (w)
Part Number : 63501-NB
346
Tri m Ta b s
349. Lenco Trim
Tab Kits
Lenco Trim Tabs
Trailer Boat Sizes
Lenco Standard Ram Kits
Lenco Edgemount Kits
Lenco Short Ram Kits
350. Lenco
Actuators
Lenco 101 Standard Actuator
Lenco 101 XDS (Short) Actuator
Lenco 102 XD (Extended) Actuator
351. Lenco
Switches &
Auto Glide Boat
Leveling System
Lenco Up/Down Switch Panel with
LED Indicators
Lenco Auto Glide™System
Lenco Up/Down Switch Panel with
Auto Retract
Lenco Up/Down Switch Panel OEM Style
348
L e n c o T r i m T a b s - Trim Tab Kits
Lenco Trim Tabs
Trim Tabs make the single most important difference in the way your boat rides and
performs. They are optional on some boats but should be as standard as power and
trim
• Instant response electric actuators for precise control
• Self locking ballscrew will not drift even when backing
• 12-guage (2.6mm) laser cut stainless steel trim tab planes
• High impact corrosion-proof mounts look great through years of abuse
• Clean, time and space saving installation
• LED indicators are optional
Sizes available to for boats 14’ right up to 99 foot!
With Lenco there are options to suit almost all applications.
Trailer Boat Sizes
For most boats 5 to 8m with a standard transom the
Lenco 9”x 12” are suitable.
Each kit includes:
* 12-volt actuators (2) with 6 foot leads
* Stainless steel trim tab blades (2)
* 20’ actuator extension harnesses (2)
* Upper mounting bracket with gland seal
* Lower mounting bracket
* All stainless steel mounting hardware
* Switching is as supplied per product listing
Lenco Standard Ram Kits
These are our most popular Trim Tab kits and are suited for boats 5
to 8m with a standard transom such as a Surtees boat.
Kit Part Numbers :
5602 - 9” (length) x 12” (width) basic kit
5604 - 9” (length) x 12” (width) kit with auto retract
5643 - 9” (length) x 12” (width) kit with LED indicators
Lenco Edgemount Kits
Lenco Short Ram Kits
These kits have our standard ram setup with edge mounted plates
that are suited for low transom boats.
These kits have a slightly shorter ram setup which help when you
have limited space on your transom.
Ideal for all boats with a low transom height such as Challenger
Boats. (See image below)
The 9” x 12” plate size is used with most boats in the 5 to 8 metre
range.
Kit Part Numbers :
5615 - 12” (length) x 9” (width) edgemount - auto retract
5615LED - 12” (length) x 9” (width) edgemount - LED indicators
Ideal for all boats with portofino transom for example buccaneer
boats , and some Bluefin boats. (See Buccaneer image below)
Kit Part Numbers :
5645 - 9” x 12” Trim Tab Kit - Short Ram with auto retract
5646 - 9” x 12” Trim Tab Kit - Short Ram with LED indicators
349
L e n c o T r i m T a b s - Lenco Actuators
Lenco 101 Standard Actuator
Standard replacement actuator / ram to suit most standard lenco trim tab kits.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response,
which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators
are fully submersible with all plug & play waterproof Deutsch connections.
Stroke travel: 57mm
Overall length tip to tip when retracted: 30.80cm
Cable length supplied: 1.8m
The entire Lenco Actuator is fully submersible, maintenance free and sealed for life.
Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.
Part Numbers :
5623 - (12V Actuator)
5623-24 - (24V Actuator)
Lenco 101 XDS (Short) Actuator
This is the shortest Actuator Lenco manufacture.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response,
which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators
are fully submersible with all plug & play waterproof Deutsch connections.
Stroke: 57mm
Length overall: 10-7/8” (27.62 cm)
Length pin to pin: 10-1/4” (26.03cm)
Diameter (upper housing): 2-1/2” (6.35mm)
The entire Lenco Actuator is fully submersible, maintenance free and sealed for life.
Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.
Part Numbers :
5617 - (12V Actuator)
5617-24 - (24V Actuator)
Lenco 102 XD (Extended) Actuator
This is the Extended Actuator with the Lenco range.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response,
which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators
are fully submersible with all plug & play waterproof Deutsch connections.
Stroke: 108mm
Length overall: 12-7/8” (32.70 cm)
Length pin to pin: 12-1/4” (31.11 cm)
Diameter (upper housing): 2-1/2” (6.35 cm)
Mounting hardware: 5/16” (7.9 mm)
The entire Lenco Actuator is fully submersible, maintenance free and sealed for life.
Lenco trim tabs and switches carry a 3-year limited warranty from the date of original purchase.
Part Numbers :
5617 - (12V Actuator)
5617-24 - (24V Actuator)
350
L e n c o T r i m T a b s - Switches & Auto Glide System
Lenco Up/Down Switch Panel with
LED Indicators
Lenco Up/Down Switch Panel with
Auto Retract
Clearly displays the Trim Tab
position with LEDs.
Tactile switch panel for Lenco
Trim Tabs.
* Includes Auto Retract
* Includes Auto-Retract
Part Numbers :
5683 - Complete (Switch
Panel and control box)
5684 - LED Up/Down Switch
Panel (requires control box)
5682 - Electronic controller box (for use with 5684 switch panel)
Part Numbers :
5635RP - Complete (Switch
Panel and control box)
5634 - Up/Down Switch Panel
(requires control box)
5681 - Electronic controller box (for use with 5634 switch panel
only)
Lenco Up/Down Switch Panel - OEM Style
These switches are in line with trim motor and switch the load directly without any additional
controller.
Rated current: 20Amps
Part Number : 5635
Lenco Auto Glide™System
The Auto Glide uses engine data and GPS data to drive your boat to the most efficient running angle by
adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set up
process upon the installation of your Auto Glide system.
Your boat’s running angle is measured 25 times per second and this data is used by the new Auto Glide
control box to:
* Automatically puts your boat in the most efficient running angle.
* Reduce the amount of bow rise of your boat during hole shot mode.
* Eliminate bow porpoising (bow bounce).
* Keep your boat level at all times.
* Adjusts to changing sea conditions automatically
* Reads Smartcraft, NMEA 2000 & J1939 data
These actions will result in a smoother ride and the best possible fuel
efficiency.
The Auto Glide Control Box consists of gyroscopes, accelerometers, and
new, very sophisticated, and patented software.
The Auto Glide has 3 automatic operational modes, 4 automatic settings,
and 2 manual operational modes. Although you will most keep your Auto
Glide in automatic mode, you may immediately convert to manual mode
simply by pressing one of the 4 up/down buttons on the key pad.
Part Numbers :
5600 - Upgrade existing Lenco Trim Tab system to Auto Glide System
5604AG - Auto Glide Kit complete with 9” x 12” Standard planes
5615AG - Auto Glide Kit complete with 9” x 12” Egdemount planes
351
Wipers
354. Speich
Wipers
358. Wiper
Switches
Speich Nautic Type E Wiper Motor
- Torque 10Nm
Speich Nautic Clearview Screens
Speich Pantograph Arm 95P
Speich Manual Wiper Control
Speich Pendulum Wiper Arm 95F
Speich Wiper Blades
Wiper Speed / Interval Controller
Wiper Switch - 2 Speed + Park
Wiper Switch - 12 Volt
356. Wiper
Motors
TMC Wiper Motors with Cover
Wexco Wiper Motor - 12V
High Torque Marine Wiper Motor
- 12V
Lubafe Wiper Motor - 12V
6V Windscreen Wiper Motor
12 Volt Self Park Wiper Motor
359. Washer
Systems
Wexco Washer Tank & 12V Pump
2.5 Litre Washer Tank & 12V Pump
Washer Hose for Wiper Systems
Speich Spray Nozzle
Speich Thru Bulkhead Fitting
Female Tube Joiner for Spray Hose
Male Tube Joiner for Spray Hose
1.7 l Washer Tank & 12V Pump
1.45 Litre Washer Tank & 12V Pump
Speich Electro Valve for Washers
T-Piece Tube Joiner for Spray Hose
L-Piece Tube Joiner for Spray Hose
Straight Tube Joiner for Spray Hose
357. Wiper Blades
& Arms
TMC Pantograph Wiper Arm
TMC Wiper Blade
Wexco Wiper Blade
Wexco Pantograph Wiper Arm
TMC Pendulum Wiper Arm
TMC Wiper Blade - Stainless Steel
AAA Wiper Arm - Bayonet
AAA Wiper Blade - Bayonet
Manual Wiper Control
with 14” Arm & Blade
Manual Windscreen Wiper Control
353
W i p e r s - Speich Wipers
Speich has been operating in the maritime and nautical sector since 1938, when the first clear view screen was patented.
Over the years the company has specialised in production of high quality windscreen wiper systems specifically designed for the
professional Mariner.
* Supplier to the Navy & Coastguard
* Strict quality assurance system in accordance with the standard: UNIX-ISO 9001:2000; RINA approved
* Suppliers to the world’s best boat builders including Haines Hunter( NZ), Rayglass, Riviera, Whitepointer
* “SPEICH Nautic”, specially designed for small craft
* High torque motors available up to 80NM
* Motors and wiper arm components are all manufactured from 316 marine grade stainless steel
Speich Nautic Type E Wiper Motor - Torque 12Nm
These Speich Wiper Motors are available in 12V or 24V DC,
have two speeds, a self-parking mechanism and variable wiping angle.
Italian Made - Excellent Quality
Available in several shaft length options:
38mm shaft suits 5mm-12mm wall thickness
64mm shaft suits 15mm-35mm wall thickness
90mm shaft suits 38mm-60mm wall thickness
Installation Note: The motor axle must be perpendicular to the glass surface. Insert a block if required.
The motor unit can be installed above or below the window and can be positioned at any angle around its axle.
*Two Speeds: v1 = 35 and v2 = 55 stroke/min
*Power Consumption: 35W (v1) - 40W (v2)
*Starting Power: 100W (v1) - 110W (v2)
*Self-parking on either left or right side.
*Adjustable wiping angles to suit application (from 45 º to 110º)
Part Numbers :
4554 - 12 Volt with 38mm shaft (5mm-12mm wall thickness)
4555 - 12 Volt with 64mm shaft (15mm-35mm wall thickness)
4558 - 12 Volt with 90mm shaft (38mm-60mm wall thickness)
Speich Pantograph Arm 95P
316 Stainless Steel pantograph wiper arm.
Adjustable arm length, supplied in the maximum length of
550mm
Shaft Ø16mm and pivot Ø14mm
Part Numbers : 4551
4551-ZZ (with spray nozzle)
Speich Manual Wiper Control
4580 - 24 Volt with 38mm shaft (5mm-12mm wall thickness)
4556 - 24 Volt with 64mm shaft (15mm-35mm wall thickness)
Speich Pendulum Wiper Arm 95F
316 Stainless Steel pendulum wiper arm.
Adjustable arm length up to 500mm
Shaft Ø16mm and pivot Ø14mm
Part Numbers :
4557
4557-ZZ (with spray nozzle)
Speich Wiper Blades
Speich Wiper Blades have 7mm bayonet fastenings.
Manual wiper actuator for wall thickness up to 35mm
Shaft diameter 16mm
Made in Europe
High quality.
Blades and arm extra
Part Number : EMAN
354
Part Numbers :
4567 - 280mm 4568 - 330mm
4564 - 400mm
4565 - 450mm
4566 - 500mm
W i p e r s - Clearview Screens
Speich Nautic Clearview Screens
First produced in 1938, the SPEICH Clearview screen is a high technology product, carefully engineered in all it’s details
and designed according to ISO 3904. Many decades of field experience and constant technical improvements have made
the SPEICH Clear view screen extremely reliable and durable even under the severe environment conditions.
Tens of thousand units have been supplied all over the world and are installed on all kind of merchant and military ships,
yachts and tugboats.
Schematically, SPEICH Clearview screen keeps a glass disk free from rain, snow or sea-water by fast rotation. The motor
is placed in the centre and is fastened to the fixed glass so as to obtain the largest possible field of vision. This particular
assembly also makes the unit water and airtight, thus making it suitable for pressurised and air-conditioning bridges. The
rotating glass is hardened and optically rectified to avoid any optical distortion. The electric motor is available for many
tensions; the rotor is tropicalized and turns on silent ball-bearings.
All metal parts are made of brass; a specially designed manifold between the ring surrounding the rotating glass and
the fixed frame keeps water from entering the space between the fixed and rotating glass. This space can optionally be
heated by electric resistance to avoid condensation and ice formation, which could prevent proper operation.
This unit is designed to be installed in a circular hole cut in a glass, wood, acrylic or metal surface (1). The hole diameter
is indicated in the table below.
The unit is assembled by flange and counterring (5), made airtight by neoprene gasket.
The fixed hardened glass disk supports the motor (4) which rotates the optically rectified glass disk. On request the unit
is supplied with a heating element (6) to prevent condensation and formation of ice.
Metal parts are turned and can be chrome plated on request.
Dimensions and weight type EX
Type EX38S EX1S EX2S A
B
C
380 mm 436 mm 421 mm 350 mm 406 mm 391 mm 300 mm 356 mm 341 mm Weight
15.5 kg
14.5 Kg
12.5 Kg
For more information on price and availability
please contact us.
355
W i p e r s - Wiper Motors
TMC Wiper Motors with Cover
Wexco Wiper Motor - 12V
12 Volt or 24 Volt Power
Options.
12 Volt
Interchangeable
Sweep Angles of
83º/100º/110º/120 º
2 Speeds with Self-Parking.
Dimensions: LxWxH
(208x112x66mm)
Interchangeable Sweep Angles of 40º/50º/60º/70º/80º/90º/1
00º/110º
2 Speeds with Self-Parking.
1/2” Drum Pivot
Part Number : 4537
Part Numbers :
4592 - 12 Volt, 1” Shaft
4593 - 24 Volt, 1” Shaft
4594 - 12 Volt, 2” Shaft
4595 - 24 Volt, 2” Shaft
Lubafe Wiper Motor - 12V
High Torque Marine Wiper Motor - 12V
2 Speed with Park
Interchangeable
Sweep Angles of
83º/100º/110º/120 º
Working angle can be
set at 45°/60°/80°/110°
Part Number :
16650 - 1” Shaft
6V Windscreen Wiper Motor
2 Speeds with
Self-Parking.
Dimensions: LxWxH
(197x101x51.4mm)
Part Numbers :
4592NC - 1” Shaft
4594NC - 2” Shaft
6 Volt Stainless Steel
Self-Park Wiper Motor.
Replica used in vintage
cars and hot rods.
1932-1939 FORD
Windshield wiper motor
replacement
The shaft can be shortened to suit application. (Instructions
included)
Working Angle: 110°
Shaft length: 127mm
Shaft thread Dia: 9mm
Thread Length: 42mm
Part Number : 16501-06
356
12 Volt Self Park Wiper Motor
Single Speed - Self Parking
Shaft length: 55mm
(Thread 42mm
Nut & washer 11mm)
Part Numbers :
16500-12 (83 degree working angle)
16501-12 (90 degree working angle)
W i p e r s - Wiper Blades & Wiper Arms
TMC Pantograph Wiper Arm
TMC Pendulum Wiper Arm
Dual Arm with 7mm
Bayonet fitting
Adjustable Length
Shaft Ø14mm
7mm Bayonet type fitting
Length can be adjusted
Shaft Ø14mm
Part Numbers :
4609 - (330-425mm length)
4610 - (398-475mm length)
4611 - (470-550mm length)
Part Number :
4608 - (270-365mm length)
4607 - (345-440mm length)
Wexco Pantograph Wiper Arm
Wexco Wiper Blade
Dual Arm with adjustable Length 460-560mm
1/2” Drum pivot
Design allows blade to curve to window shape.
Made of 304 Stainless steel.
Length: 500mm
Universal Fit (9x3 hook, 9x4 hook, 3/16” pin, 1/4” pin, bayonet)
Part Numbers : 4534
Part Number : 4536
TMC Wiper
Blade
Stainless Steel holder.
Design allows blade to curve
to window shape.
7mm Bayonet
Connection
7mm Bayonet Connection
Part Numbers :
4615 - 280mm
4616 - 355mm
4617 - 405mm
Part Numbers :
4618 - 280mm
4619 - 355mm
4620 - 405mm
4621 - 457mm
TMC Wiper Blade - Stainless Steel
AAA Wiper Arm - Bayonet
AAA Wiper Blade - Bayonet
Wiper Arm with 5mm
bayonet connection for
blade
Wiper Blade with 5mm
bayonet connection
Part Numbers :
16582-11 (11” long)
16582-14 (14” long)
Suits 16582 arms
Part Numbers :
16592-11 (11” long)
16592-14 (14” long)
357
W i p e r s - Wiper Switches
Wiper Speed / Interval Controller
Often called a CT41 or CT42 Wiper Control Switch.
* Two speed control: Slow speed, Fast speed
* 3 interval delays - 2s, 4s, 8s
* Washer control
* Dimmer input
* Standard switch cut-out.
*Made in Europe
*Voltage - 12v or 24V
Part Numbers :
4569
(controls 1 motor)
4570 (controls 2 motors)
Manual Wiper Control with 14”
Arm & Blade
Part Number :
MANWIPE14
Manual Windscreen Wiper Control
Suits 16580 ,16582 arms &
blades 16590 ,16592
Max wall thickness: 25mm
Part Number : MANWIPE
Wiper Switch - 2 Speed + Park
For controlling a 2 Speed wiper motor.
Selects high speed or low speed and Park function.
Wiring Pin Connections:
1: Fast Speed
2: + in (to park)
3: Slow Speed
7: Light - (negative)
8: Light + (positive)
Part Numbers :
4571 (12 Volt)
4573 (24 Volt)
Wiper Switch - 12 Volt
For controlling a 2 Speed wiper motor .
Selects high speed or low speed and Park function.
15 Amp Max
Wiring Pin Connections:
1: Fast Speed
3: Slow Speed
5: Line +
6: Park
Part Number : 4582
358
Wexco Washer Tank & 12V Pump
Part Numbers :
4545 - 1.9 (1.9 Litre tank)
4545 - 3.8 (3.8 Litre tank)
W i p e r s - Washer Systems
2.5 Litre Washer Tank & 12V Pump
1.7 l Washer Tank & 12V Pump
230(H) X 127(W) X 153mm (Depth including pump)
(100mm Depth tank only)
Horizontal washer tank
reservoir holds 1.7 litres and
comes with 12 volt pump,
wiring leads T-piece and PVC
Tubing.
Includes:
Mounting Bracket
1m hose & T piece
Part Number : 4545-2.5
Washer Hose for Wiper Systems
6mm OD/4mm ID hose
Sold per metre
Part Number : ZZ-WH
Part Number : 4545-1.7
1.45 Litre Washer Tank
& 12V Pump
Dimensions: 215(H) x 137(W) x
95mm(Depth including pump)
12 volt pump, T-piece & 1.5m PVC
Tubing.
Part Number : 4545-1.45
Speich Spray Nozzle
Chrome plated brass.
5-35mm panel thickness.
10mm diameter drill hole
Designed for use with fresh water or washer
fluid
Part Number : 4589
Speich Thru Bulkhead Fitting
Stainless Steel & Chrome
For up to 40mm Bulkhead.
10mm Drilling Hole
Suits 6mm OD/4mm ID hose
Speich Electro Valve for Washers
12V Solenoid for
Pressurised washer
systems.
Rated for 0-9 Bar (0-130psi)
Made in Italy & CE rated.
Part Number : ZZ-SOLENOID
T-Piece Tube Joiner for Spray Hose
Suits 6mm OD/4mm ID hose.
Part Number : ZZ-IAT
Part Number : ZZ-BF
Female Tube Joiner
for Spray Hose
L-Piece Tube Joiner for Spray Hose
Suits 6mm OD/4mm ID hose.
Suits 6mm OD/4mm ID hose.
Part Number : ZZ-IAF
Part Number : ZZ-IAL
Male Tube Joiner
for Spray Hose
Straight Tube Joiner for Spray Hose
Suits 6mm OD/4mm ID hose.
Part Number : ZZ-IAM
Suits 6mm OD/4mm ID hose.
Part Number : ZZ-IAD
359
Absolute Marine
PO Box 58773, Botany, Auckland 2163, Auckland, New Zealand
Ph: 09 273 9273
Fax: 09 273 9099
Email: info@absolutemarine.co.nz
Website: www.absolutemarine.co.nz
C a t a l o g u e 2 0 11