Hazardous Location Products
Hazardous Location Products
Oil and Gas
Hazardous Location Products
Oil and Gas
Terminal Blocks
revosCOAX Heat Trace Connectors
selos, fasis WKFN & fasis WTP – 3 product families,
3 interconnect technologies – a unique range of products. Regardless
of whether you prefer screw, tension spring or push-in connection
technology. Regardless of whether used in control cabinets, plants or
buildings – with an extensive product range of one of the pioneers of DIN
rail terminal blocks, you have played the right card!
1/2’’ or 3/4’’ NPT-Female thread
Gender colour coding of inserts (male = black; female = blue)
No rotational alignment of the connector body required to mate
Field and/or Factory Installed; Field Maintainable
35A, 600V, 8-14 AWG
Certified to CSA Standards:
Class I, Zone 1, Ex e II T6
Certified to CSA Standards:
Class I, Division 2: Groups ABCD; T6; Tamb -40˚C to +50˚C; Type 6
Class I, Zone 2: Ex nA; IIC; T6; Tamb -40˚C to +50˚C; IP 67
Power Supplies
gesis RST 20i3 HD Z2 30A
Wherever electricity flows and signals are processed, interface
products from Wieland Electric prove their extraordinary strength. The
wide range of relays, the components for power supply and overvoltage
protection as well as the passive interfaces and analog modules make your
application a winner, too. Send a message with our interface technology!
Coding system via use of coloured inserts
Ratings: 3 pole, 30A , 600V, 10 AWG
Screw Clamp Termination
IP 66/68, Type 6P rated
Cable OD: 10-14mm
Double Locking System
Certified to cULus Standards:
Class I, Division 2, Groups A, B, C and D
Certified to CSA Standards:
Class I, Zone 2: Ex nA IIB+H2 T5 X; Type 6P, IP 69K
Relays
gesis RST 20ix HD Z2
In control, transportation and production technology, coupling relays have
been reliably accomplishing important tasks for years, and continue to do
so. Together with control systems, they offer numerous possibilities of
making your application even safer and less sensitive to disturbances.
Colour (mechanical coded) insert sets
Cable Mount, Panel Mount and Device Mount versions available
All mating connector sets come with coarse thread reinforcing collars
Field and/or Factory Installed; Field Maintainable
UV-resistant polymer plastic, special plated contacts; no exposed gaskets
Electrical Ratings: 20A / 600V / 20-12 AWG
Certified to CSA Standards:
Class I, Division 2, Groups A, B, C and D, T6
Certified to CSA Standards:
Class I, Zone 2: Ex nA; IIB+H2; -40˚C to +50˚C; Type 6P, IP 69K
For further technical details please
visit our website at:
www.wieland-electric.ca
Non-Incendive Barriers
revos HD D2 connectors
This module provides isolation for a circuit on the load side of the module
to be rated as non-incendive, and is to be used on digital inputs or outputs.
The DNIB allows the use of non-rated wiring to end devices in Class I, Zone
2 / Division 2 areas, subject to the allowances of the Canadian Electrical
Code. Eliminates need for explosion proof enclosures eliminates costly
wiring DIN rail mountable housing
2 to 48 pole / 16 A to 82 A versions available
Cable to Panel or Cable to Cable versions available
All mating connector sets come with screw-locking connection mechanism
Type 4, 4X; IP 65 with suitable strain relief
Copper-free aluminum enclosure; special plated contacts
Exposed gaskets are NBR, resistant to corrosive gases
Certified to CSA Standards:
Class I, Division 2: Groups ABCD; T6
Certified to CSA Standards:
Class I, Division 2, Groups ABCD; T4; -40˚C to +40˚C