84 SERIES
STANDARD FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NEW Factory authorized startup
ENERGY STAR® Qualified
Dual-pawl cradle drive system
One-piece cast stainless steel upper & lower spray
arm assemblies for ease of cleaning
Internal removable scrap basket and
three-piece scrap screen
Standard vertical opening accommodates
18" x 26" sheet pans
Wide leakproof swing out insulated hinged doors
on wash/rinse
Anti-jam conveyor drive system
Energy Sentinel (Idle pump shut-off)
Convenient top-mounted controls
Automatic tank fill
Door safety switch
Never leak, ball valve drain closure
Enclosure panels (front and sides)
Stainless steel heavy-gauge construction, including
base and feet
Electric tank heat
3 Hp wash and rinse pump motors
Stainless steel pump and impeller
Two-point electrical connection
Self-diagnostic controls
Vent fan control switch
Stainless steel rear manifolds
CH078
PREWASH MODELS ONLY
• External prewash scrap basket
• Prewash pump 1 Hp motor
• 22" Prewash
• 26” Prewash
• 36" Prewash
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
Model 84 Shown with Vent
Cowl and Damper Option
Photo is for general visual
representation only. Please
refer to specifications for
the latest detailed product
information.
SPECIFIER STATEMENT
Specified unit will be Champion model 84 Series high
temperature rack conveyor dishwashing machine.
Features top mounted control cabinet; upper and lower
one-piece stainless steel spray arm assemblies, removable
internal scrap baskets with three-piece scrap screens.
Swing out insulated front access doors. Anti-jam conveyor
drive system.
1 year parts and labor warranty.
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
(1M) 12/15 Printed in U.S.A.
Champion, an Ali Group Company
84 SERIES RACK CONVEYOR
Project
Item No.
Quantity
88-1/4"
Vent Stack
Distance
2"
84 SERIES
27-3/8"
1A
2"
2
3
1-1/2"
4-7/8"
16"
26-1/2"
29-1/2"
2"
54-1/8"
2
4-1/2"
88-1/4"
Vent Stack
Distance
2"
3-1/4"
2"
29-7/8"
2
4A
4A
4B
4B
3-1/4"
3
27-3/8"
1-1/2"
2"
2
1A
1A
84, 106 PW, 110 FFPW, 120 HDPW
4-7/8"
1A
16"
High-Temperature
Rack Conveyor Dishwashing Machine
27" Door
Opening Clearance
MODEL 84
4-1/2"
26-1/2"
27" Door
Opening Clearance
Dimensions shown in inches [mm]
1200 lbs.
Shipping50-1/4"
weight crated: Inside
36-3/8"
34-1/4"
50-1/4"
Inside
E22PW
8"
84"
8"
8A
13"
Plumbing
Clearance
8A
4"
3"
2
84"
8"
8B
4"
8"
8B
110-1/4"
Vent 4"
Stack Distance
6"
1A
E26FFPW
2
107-5/8"
13"
Plumbing Vent Stack Distance
Clearance
4"
3"
6"
1A
7-1/4"
21-7/8"
Opening
20"
Inside
Track
7-1/4"
20"
Clearance
3-1/4"
20"
Clearance
58-1/8"
Machine
Height
8-1/4"
3 2-1/2"
2-1/2" 3
34"
Load Height
9" 11-1/8"
5" 7-1/4"
17"
4-1/4"
5
12-1/2"
6
29-3/4"
6
1B
5
4A
6
6-1/2"
12-1/2"
3
1B
110"
4A
33-7/8"
Front View
Right to Left
16"
Door
Clearance
7
42"
50-1/8"
7
4B
70-1/2"
E84
2"
2"
2"
3
4A
1-1/2"
4-7/8"
3-1/4"
4A
3-1/4"
4B
1A
1A
3
27-3/8"
1-1/2"
4B
2
1A
16"
26-1/2"
2"
4-7/8"
29-1/2"
2"
2
4-1/2"
29-7/8"
2
27-3/8"
1A
54-1
2
2"
54-1/8"
2"
E110FFPW
88-1/4"
Vent Stack
Distance
16"
26-1/2"
2"
E84
E106PW
88-1/4"
Vent Stack
Distance
2
2
88-1/4"
Vent Stack
Distance
5
70-1/2"
5
4-1/2"
8-5/8"
4-1/4"
6
106"
26-1/4"
42"
4B
8-1
34"
Load Height
4B
4A
26-1/4"
4A
Front View
Left to Right
3
8-1/4"
17"
11-1/8" 9"
7-1/4" 5"
4B
3/4"
58-1/8"
Machine
Height
8-1/4"
1A
4-1/2"
16"
26-1/2"
27" Door
Opening Clearance
27" Door
Opening Clearance
Plan View
Left to Right
Plan View
Right to Left
50-1/4"
Inside
27" Door
Opening Clearance
50-1/4"
Inside
36-3/8"
34-1/4"
E22PW
8"
13"
Plumbing
Clearance
84"
8A
4"
2
3"
84"
8"
4"
2
3"
1A
21-7/8"
Opening
20"
Inside
Track
3-1/4"
1/4"
20"
Clearance
7-1/2"
Off Wall
58-1/8"
Machine
Height
21-1/2"
Flange Max 8-1/4"
22"
Opening 2-1/2" 1/4"
3
31"
1-1/2"
Overall
17"
Width
Curb
9" 11-1/8"
34"
Load Height
5" 7-1/4"
4B
8-3/4"
5
4-1/4"
6
29-3/4"
7
Suggested Table
Construction
26-1/4"
4A
4B
12-1/2"
42"
50-1/8"
3
1B
6
4A
3-1/4"
Height
3 2-1/2"
8-1/4"
17"
11-1/8" 9"
7-1/4" 5"
1/8" Min
6-1/2"
1B
3
8-3/4"
6"
Nominal
Wall
Clearance
4B
5 6
7-1/4"
20"
Clearance
34"
58-1/8"
Load Height
Machine
8-1/4"
4A
12-1/2"
4-1/4"
5
29-3/4"
4A
4-1/4"
6
26-1/4"
106"
8-5/8"
4B
End View
4A
33-7/8"
34"
Load Height
7
110"
7
5
42"
4B
70-1/2"
5
E84
E110FFPW
70-1/2"
5
Due to an ongoing
value analysis
program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
E84
3"
58-1/8"
Machine 20"
Height Clearance
Flange Detail
1-1/8"
2
13"
107-5/8"
Plumbing
ClearanceVent Stack Distance
6"
20"
Inside
Track
2-1/2"
21-7/8"
Opening
4"
7-1/4"
4"
84"
8A
13"
Plumbing
Clearance
8B
110-1/4"
4"
Vent Stack Distance
6"
8"
7-1/4"
8"
8A
8B
1A
E26FFPW
8"
8"
Up to 10"
50-1/4"
Inside
E84
E106PW
5070-1/2"
29-1/2"
29-7/8"
2
4A
3
1-1/2"
4-7/8"
4A
3-1/4"
1A
3-1/4"
3
4B
4B
27-3/8"
1-1/2"
2"
2
1A
84 SERIES
4-7/8"
1A
4-1/2"
16"
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
26-1/2"
27" Door
Opening Clearance
50-1/4"
36-3/8" Inside
34-1/4"
MODEL 106
PW WITH 22" PREWASH
E22PW
E26FFPW
16"
Door
Clearance
84"
8"
8B
110-1/4"
Vent Stack Distance
2
3"
4"
13"
Plumbing
Clearance
1A
3 2-1/2"
8-1/4"
3
6
1B
4A
6
4A
124-1/4"
Vent Stack Distance
26" Vent
Door
Clearance
1B
6-1/2"
3
8-1/4"
8-1/4"
12-1/2"
8-5/8"
4-1/4"
6
106"
4A
26-1/4"
34-1/4"
33-7/8"
8-1/2"
110"
36 3
8"
7
5
120"
106" 1
36-3/8"
2-1/2"
34 4 "
E36HDPW
E26FFPW
MODEL E26FFPW
110 FFPW WITH 26"E22PW
FRONT
FEED PREWASH
42"
13"
Plumbing
Clearance
4"
1A
6"
16"
Door
Clearance
26"
Door 5
Clearance
1400 lbs.
Shipping weight crated: 8B
E
4B
70-1/2"
8"
8-1/4"
Left to Right
4B
5
8-1/4"
34"
Load Height
17" 17"
27" Door
9" 11-1/8"11-1/8" 9" 7-1/4"
5" 7-1/4"
5" Clearance
Opening
4B
110-1/4"
Vent Stack Distance
29-1/2"
Right to Left
58-1/8"
Machine
Height
16" 26-1/2"
8-1/4"
2-1/2" 3
107-5/8"
Vent Stack Distance
4-1/2"
20"
Clearance
8-1/4"
E26
Front View
7-1/4"
2"
2
E22PW E36HDPW
6"
1A
29-1/2"
16"
Door
Clearance
29-7/8"
27-3/8"
Dimensions shown in inches [mm]
8"
8A
2"
36-3/8"
36 3
8"
1375 lbs.
Shipping weight crated: 4"
26"
Door
Clearance
E106PW
E84
E110FFPW
107-5/8"
Vent Stack Distance
E120HDPW
E106PW
124-1/4"
Vent Stack Distance
110-1/4"
Vent Stack Distance
7-1/4"
26"
Door
Clearance
29-1/2"
20"
Clearance
E110F
107-5/8"
Vent Stack Distance
Front View
58-1/8"
Machine
Height
8-1/4"
8-1/4"
34"
Load Height
8-1/4"
8-1/4"
8-1/4"
8-1/4"
Right to Left
4-1/4"
8-5/8"
8-1/2"
Left to Right
110"
36 3
8"
5
5
2-1/2"
5
120"
106"
34 41 "
36-3/8"
4-5/8"
110"
36 3
8"
MODEL
HDPW WITH 36"
HEAVY DUTY PREWASH
E26FFPW
E22PW 120
E36HDPW
E36HDPW
E110FFPW
E120HDPW
E106PW
E110FFPW
Shipping weight crated: 1550 lbs.
W
110-1/4"
Vent Stack Distance
124-1/4"
Vent Stack Distance
107-5/8"
Vent Stack Distance
124-1/4"
Vent Stack Distance
E12
Front View
8-1/4"
8-1/4"
8-1/4"
8-1/4"
8-1/4"
Right to Left
8-1/2"
106"
5
2-1/2"
120"
Left to Right
110"
5
5 14-1/2"
4-5/8"
120"
NOTE: For complete machine dimensions, plan view, end view, specifications and table construction see 84 drawing page.
E106PW
E110FFPW
E120HDPW
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
Dimensions shown in inches
Utilities
1 Electrical Connection
A Machine electrical connection
B Booster electrical connection
2 Hot Water
Main connection 3/4" NPT
3 Cold Water
Contact Factory
4 Hot Water Tank
A Heat inlet connection 1" NPT
B Heat return connection 1" NPT
5 Drain
Connection 1 1/2" NPT
6 Steam
Inlet connection 1 1/4" NPT
7 Condensate
Connection 1" NPT return to boiler
8 Vents
A
B
Stack connection - Load end
150 CFM @ 1/4" static pressure
Stack connection - Unload end
400 CFM @ 1/4" static pressure
Warning: Plumbing and electrical connections should
be made by qualified personnel who will observe all the
applicable plumbing, sanitary,
safety codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010
84 Electric
TABLE A - Machine Connection
106 PW, 110 FFPW, 120 HDPW Electric
TABLE A - Machine Connection
Machine Only
Machine only
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
208/60/3
90
110
110
208/60/3
95
125
125
240/60/3
80
100
100
240/60/3
83
100
100
480/60/3
40
50
50
480/60/3
41
50
50
575/60/3
31
40
40
575/60/3
32
40
40
84 ONLY
TABLE B - Booster Connection
40°F/22°C Rise – 15 kW
Electric built-in booster (booster only)
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Minimum
Supply Ckt. Overcurrent
Rated Conductor Protective
Device
Amps Ampacity
106 PW, 110 FFPW, 120 HDPW
TABLE B - Booster Connection
40°F/22°C Rise – 15 kW
Electric built-in booster (booster only)
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Minimum
Minimum
Supply Ckt. Overcurrent
Rated Conductor Protective
Device
Amps Ampacity
208/60/3
42
50
50
208/60/3
42
50
50
240/60/3
36
45
45
240/60/3
36
45
45
480/60/3
18
25
25
480/60/3
18
25
25
575/60/3
15
20
20
575/60/3
15
20
20
70°F/39°C Rise – 24 kW
Electric built-in booster (booster only)
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
70°F/39°C Rise – 24 kW
Electric built-in booster (booster only)
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Minimum
Minimum
Supply Ckt. Overcurrent
Rated Conductor Protective
Device
Amps Ampacity
standard or equivalent) to be supplied (by others)
in common water supply line at service connection.
208/60/3
67
80
80
208/60/3
67
80
80
Plumbing Notes: Because of the variation
240/60/3
58
70
70
240/60/3
58
70
70
in house-supplied steam and water pressures,
steam and water pressure regulating valves
(PRVs) may be needed. (Water PRV is standard
on machines with booster.) The PRVs can either
be purchased from Champion or obtained locally.
Venting Notes: Fabricated duct size:
3-7/8" x 15-7/8" (Outside dimensions)
480/60/3
29
35
35
480/60/3
29
35
35
575/60/3
24
30
30
575/60/3
24
30
30
106 PW, 110 FFPW, 120 HDPW
Steam or Hot Water Heat
TABLE A - Machine Connection
84 with Steam or Hot Water Heat
TABLE A - Machine Connection
Machine and steam built-in booster
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Overcurrent
Protective
Device
208/60/3
15
20
20
240/60/3
14
20
20
480/60/3
7
15
15
575/60/3
6
15
15
Contact factory for single phase information.
Machine and steam built-in booster
Elec.
Specs.
Minimum
Minimum
Supply Ckt. Overcurrent
Rated Conductor Protective
Device
Amps Ampacity
208/60/3
20
25
25
240/60/3
17
25
25
480/60/3
9
15
15
575/60/3
6
15
15
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated)
Wash tank (US gal.)
Conveyor speed (ft/min.)
Motor Horsepower
Drive
Wash
Rinse
Water Consumption
US Gal. per hr. (max. use)
US Gal. per rack
Heating
Tank Heat, electric (kW)
Tank heat, steam
(lbs/hr. required at
15 PSI flow pressure)
Electric booster (built-in)
(kW supplied for 40°F rise)
Electric booster
(kW supplied for 70°F rise)
Steam booster
(lbs./hr. required for 40°F rise)
Steam booster
(lbs./hr. required for 70°F rise)
356
21
9.9
1/6
3
3
131
.37
Load end (minimum CFM)
Unload end (minimum CFM)
Standard 20" x 20"
rack complement
Peg
Flat
www.championindustries.com
NEW Durable Stainless Steel
Start/Stop Switches
One-Piece Cast Stainless Steel
Spray Assembly
Stainless Steel
Built-in Nested Booster
Two-Piece Scrap Screen
Built-in Scrap Basket for ease
of cleaning
25
125
15
24
75
120
Booster heaters completely inter plumbed,
Controls are interwired
Venting
NEW Exclusive Digital Gauges
200
400
2
1
MODEL 84 RACK CONVEYOR
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
OPTIONS & ACCESSORIES
:: Tank heat: choice of steam coil, steam injector, hot water coil
:: 2 Hp prewash motor
:: 48" Blower-dryer - steam or electric
:: Booster Heaters (completely interplumbed, controls
are interwired)
:: Steam: 40°F or 70°F rise
:: Electric: 15 kW (40°F rise) (built-in only)
:: Electric: 24 kW (70°F rise) (built-in only)
:: Heat Recovery
Cantilever sideloader (with or without hood) for 90° load operation
:: 24" Sideload
NEW CCT 90
90° Corner Conveyor Table (shown)
NEW CCT 180
180° Corner Conveyor Table
also available
:: 30" Sideload (accepts sheet pans)
:: Extended pawl bar (extended drive unit) for use with
load tabling
Cantilever
Sideloader
:: Racks: peg or flat racks (specify type)
:: Steam pressure regulating valve (unmounted)
(No hood)
:: Table limit switch, unmounted (recommended on all
rack conveyor installations)
:: Vent cowl, stainless steel with 7" stack and locking damper
:: Extended vent hood, stainless steel with 7" stack and
locking damper
:: Water pressure regulating valve (unmounted)
(standard with booster)
:: Water hammer kit
:: Drain tempering kit
:: Vertical clearance through machine: 24"
(instead of standard 20") for larger ware
:: Model CCT 180 (180° Corner Conveyor Table)
:: Model CCT 90 (90° Corner Conveyor Table)
:: Model RCT 64 or RCT 84 Roller Conveyor Table
(See factory for custom length)
Model RCT 64
or RCT 84
Roller
Conveyor Table
:: Splash shields
::NEW Champion ION scale prevention system
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618