Product Catalog Canadian Fuses & Holders Circuit Protection Table of Contents General Catalog Contents Page Canadian Fuses & Accessories Standard Code Fuses 250V & 600V Fuse Holders KOS/KON/PONC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 CDSC/CDNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 CAMaster HRC Fuse Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 SAFEloc HRCI-CB Fuse Holder . . . . . . . . . . . . . . . . . . . . . . . . . .99 i Circuit Protection UL/CSA Fuses Current Limiting Canadian Standard Fuses UL/CSA Fuses General Purpose One-Time Time-Delay Volts Ref. 600Vac CDSC* CDNC* Volts Ctn. Qty. Ref. 10 600Vac 5 KOS** 1 KON** 10 PONC*** 250Vac 5 KON 1 Amp Ratings 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 15, 20, 25, 30 35, 40, 45, 50, 60 70, 80, 90, 100 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 600 1, 2, 3, 4, 5, 6, 7, 8, 10, 12 15, 20, 25, 30, (CSA ‘P’) 35, 40, 45, 50, 60 70, 80, 90, 100 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 600 Ctn. Qty. 10 5 Canadian Fuses & Holders 250Vac Amp Ratings Below 10A use ECSR 10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 60 70, 80, 90, 100 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 600 Below 10A use ECNR 10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 60 70, 80, 90, 100 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 600 1 10 5 1 Medium Voltage Fuses Dimensions - in (mm) A B A D C B F Ferrule Design–1 through 60 Amps 250Vac 600Vac Catalog Number CDNC* PONC*** KON* CDSC* KOS* Max. A 2.0 (50.8) 3.0 (76.2) 5.88 (149.4) 7.3 (185.4) 8.63 (219.2) 10.38 (263.7) 5.0 (127.0) 5.5 (139.7) 7.88 (200.2) 9.63 (244.6) 11.63 (295.4) 13.38 (339.9) Min. B 0.56 (14.3) 0.81 (20.6) – – – – 0.81 (20.6) 1.06 (27.0) – – – – Min. C – – 1.0 (25.4) 1.38 (34.9) 1.88 (47.6) 2.25 (57.2) – – 1.0 (25.4) 1.38 (34.9) 1.88 (47.6) 2.25 (57.2) D – – – 4.13 (104.8) 4.63 (117.5) 5.19 (131.8) – – – 6.13 (115.6) 7.13 (118.1) 8.19 (208.0) E – – 0.13 (3.2) 0.19 (4.8) 0.25 (6.4) 0.25 (6.4) – – 0.13 (3.2) 0.19 (4.8) 0.25 (6.4) 0.25 (6.4) F – – 0.75 (19.1) 1.13 (28.6) 1.63 (41.3) 2 (50.8) – – 0.75 (19.1) 1.13 (28.6) 1.63 (41.3) 2 (50.8) Application Section Amps 1-30 35-60 70-100 110-200 225-400 450-600 1-30 35-60 70-100 110-200 225-400 450-600 E Fuse Blocks, Holders & Misc. Volts Knife Blade–70 through 600 Amps *CDSC & CDNC are CSA certified Type “D”. ** KON 1-12A and KOS 1-60A are not CSA Certified. *** PONC are CSA certified Type “P”. For additional information, visit www.edisonfuse.com Special Purpose Fuses Standard Dimension Fuses with 10kA Minimum Interrupting Rating; CSA Certified to C22.2 No. 59.1 93 Application Section Fuse Blocks, Holders & Misc. Medium Voltage Fuses .1 .1 .01 .01 94 100 10 10 For additional information, visit www.edisonfuse.com 1,000 100 100 600A 400A 200A 60A 100A 30A 15A 600A 400A 200A 100A 60A 30A 35A 15A 20A AMP RATING 20 1 TIME IN SECONDS UL/CSA Fuses General Purpose UL/CSA Fuses Current Limiting Cat. No. KON/PONC 250Vac RMS SYMMETRICAL CURRENT IN AMPS 10,000 RMS SYMMETRICAL CURRENT IN AMPS 10,000 1,000 100 20 Special Purpose Fuses TIME IN SECONDS Canadian Fuses & Holders Fast-Acting Canadian Standard Fuses Average Time-Current Curves Cat. No. KOS 600Vac AMP RATING 1 Circuit Protection Average Time-Current Curves 600 400 200 100 60 1,000 30 AMP RATING 10 15 600 400 200 100 60 30 Cat. No. CDSC 600Vac AMP RATING 1,000 UL/CSA Fuses General Purpose 10 15 Cat. No. CDNC 250Vac UL/CSA Fuses Current Limiting Time-Delay Canadian Standard Fuses 100 10 Canadian Fuses & Holders 1 1 .1 .1 10,000 1,000 100 10 10,000 1,000 100 CURRENT IN AMPS Medium Voltage Fuses .01 .01 10 TIME IN SECONDS 10 Special Purpose Fuses TIME IN SECONDS 100 CURRENT IN AMPS Fuse Blocks, Holders & Misc. Application Section For additional information, visit www.edisonfuse.com 95 UL/CSA Fuses General Purpose UL/CSA Fuses Current Limiting CAMaster HRC Fuse Holders Canadian Fuses & Holders Special Purpose Fuses Figure 1 Range: 30 (miniature), 30, 60, and 100 Amp at 600Vac A range of fully shrouded HRC fuse holders having an advanced design. They incorporate a high level of innovation, with enhanced performance characteristics and comply with the requirements of: CSA C22.2 No. 39 as well as IEC 60269 and BS88 Standards. Unique Cam Action CAMaster Ratings The fuse carriers are fitted with a cam for ease of removal from the fuse bases allowing significantly improved contact pressure between fuse carrier and fuse base contacts, with a corresponding enhanced electrical performance level. This design overcomes a major problem of all existing dead front style fuse holders manufactured worldwide, which have to compromise between difficulties of fuse carrier removal from base and contact pressure achieved. A range of lockable safety carriers for the CAMaster fuse holder (Cat ref: LSC), are available. This distinct feature ensures isolation can be achieved allowing maintenance to be carried out in safety. Medium Voltage Fuses Ref CM20CF CM30CF CM60CF CM100CF Fuse Fixing Tightening Torques 1.5N•m 1.5N•m 2.0N•m 2.0N•m Max Cable Size #2 #2 2/0 2/0 Catalog Numbers Amps Fuse Blocks, Holders & Misc. 30 Amp 30 Amp 60 Amp 100 Amp Details For HRCI-CA Applications For HRCII Applications Reference Fuse Accommodated CM20CF --CIF21 CM30CF CM60CF CM100CF ---H07C ---KO7C ---K07CR Lockable Safety Carriers Fixing Torque and Cable Size Application Section Rating Mounting Front 30 Front/2-pole Back Front/Back Front 30 Back Front/Back Front 60 Back Front/Back Front 100* Back Front/Back *Uses compact Edison fuses. 96 Edison Catalog Numbers CM20CF 2xCM20CF + GLP CM20CF + 2 off 20BS CM20CF _ 1 off 20BS CM30CF CM30CF + 2 off 30BS CM30CF + 1 off 30BS CM60CF CM60CF + 2 of 60/100BS CM60CF + 1 of 60/100BS CM100CF CM100CF + 2 of 60/100BS CM100CF + 1 or 60/100BS Accessories for CAMaster Units Rating 30 Amp 30 Amp 60/100 Amp All All 30 Amp 30 Amp 60/100 Amp All 30 Amp 30 Amp 60/100 Amp Details Back Stud Ganging Link Kit 660V Neon Indicator Security Carrier with Clip. Clip Only Solid Link For additional information, visit www.edisonfuse.com Reference 20BS 30BS 60/100BS GLP Fuse Accommodated For CM20CF For CM30CF For CM60/100CF For 3 Pole NI-660 – 20LSC 30LSC 60/100LSC CMCS 20CML 32CML 63/100 CML For CM20CF For CM30CF For CM60/100CF For all sizes For CM20CF For CM30CF For CM60/100CF Circuit Protection Two/Three Pole Ganging 2 3 4 UL/CSA Fuses General Purpose 1 Figure 2. Unique Conversion Capability The unique design of the carriers allows ganging to be readily achieved by the use of standard accessories. This provides improved safety related to isolation and protection of 2-Pole and 3Pole electrical circuits by ensuring that the correctly related poles are removed at the same time. (See Fig. 5.) UL/CSA Fuses Current Limiting CAMaster HRC Fuse Holders Unique Conversion Capability Dual Mounting Capability Figure 5. Two/Three Pole Ganging. The design as standard provides both bolted panel and DIN rail mounting features. The DIN rail mounting facility for each of the various dimensioned ratings is so designed as to give equal height and depth above the DIN rail. Special Purpose Fuses The standard fuse holders can be readily converted from front connection to front/back stud and double-back stud connection types at the point of use. This is achieved with a unique back stud accessory and the use of a screwdriver. See conversion sequence in Fig. 2. Steps 1, 2 and 3 show removal of ferrule end and insertion of back stud accessory to give the front/back stud connection type. This sequence repeated at the opposite end gives the double-back stud connection type shown in step 4. Hinged Internal Shields Unique Cable Termination Non-removable full shrouding of live parts within the fuse base is provided by the use of hinged shields. The positive captive nature of these ensures that they cannot be omitted during installation and are so designed that insertion of the fuse carrier can only be made with them correctly positioned. Neon Indicator Hinged Captive Screws The fuse fixing screws to fuse carrier are held in captive hinges providing ease of fixing and preventing loss during installation. (See Fig. 4.) Figure 6. Neon Indicators. The fuse carrier has a marking label for ease of circuit identification. Figure 4. Hinged Captive Screws Strip Length Marking The length of cable insulation that should be stripped off is shown on the side of the fuse base. Fuse Blocks, Holders & Misc. Circuit Identification Medium Voltage Fuses Neon clip-in indicator accessories are available providing clear location and status of fuses which have opened. (See Fig. 6.) Canadian Fuses & Holders The fuse holder’s unique cable terminations are designed for user convenience and to ensure long-term reliability. They incorporate stainless steel saddles and hardened termination screws, maintaining permanent cable clamping to profiled contact plates. The main electrical contact path between the cable and fuse link tag is shown highlighted. This permits the use of high tightening torques without damage to cables or threads and provides Figure 3. Unique resistance to high cable pull out forces. (See Fig. 3.) The fuse Cable Termination holders are supplied with the hardened termination screws backed out ready for cable insertion, saving installation time. Application Section For additional information, visit www.edisonfuse.com 97 UL/CSA Fuses Current Limiting C aste C ens ons se ol e Dimensions - in (mm) Front/Back Stud and Double Back Stud Connected Units UL/CSA Fuses General Purpose Standard Front Connected Unit D F C E STRIP A 44 DIN RAIL STRIP C L OF B G STRIP STRIP Special Purpose Fuses Canadian Fuses & Holders øK H øJ Rating Amps 30 30 60 100 Catalog Number CM20CF CM30CF CM60CF CM100CF Category HRCI-CA HRCII-C HRCII-C HRCII-MISC Dimensions - in (mm) A B 1.0 (25.4) 3.69 (93.7) 1.25 (31.8) 4.63 (117.5) 1.40 (35.6) 4.93 (125) 1.40 (35.6) 4.93 (125) C 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) D 0.13 (3.2) 0.13 (3.2) 0.19 (4.75) 0.19 (4.75) E 0.64 (17.5) 0.69 (17.5) 0.65 (16.4) 0.65 (16.4) F 2.60 (66) 2.60 (66) 3.41 (86.5) 3.41 (86.5) G 2.29 (58) 2.92 (74) 3.14 (79.8) 3.14 (79.8) H 1.13 (28.6) 1.13 (28.6) 1.13 (28.6) 1.13 (28.6) Medium Voltage Fuses Panel Drilling Plans, Viewed from Front of Panel C L C L 1.14" 29.0mm 0.22" ø5.5mm CL Fuse Blocks, Holders & Misc. 1.14" 29.0mm 0.22" ø5.5mm 1.46" 37.0mm 0.22" ø5.5mm 1.46" 37.0mm 98 0.13" 3.2mm 0.75" ø19mm C L 1.62" 41.0mm 0.25" 6.35mm CM30CF Application Section CM20CF 0.13" 3.2mm 0.25" 6.35mm C L 1.46" 37.0mm 0.13" 3.2mm 0.59" ø15.0mm C L 0.25" 6.35mm For additional information, visit www.edisonfuse.com 0.13" 3.2mm 0.75" ø19mm 0.25" 6.35mm CM60 + 100CF J 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) 0.47 (11.9) K M6 M6 M8 M8 C se ol e s Circuit Protection UL/CSA Fuses Current Limiting LOC UL/CSA Fuses General Purpose Description Catalog Numbers For use with HRCI-CB Fuses Features 30 Amp 60 Amp Connection Front Back Front-Back Front Back Front-Back Edison Catalog Numbers C30F C30BS C30FBS C60F C60BS C60FBS Fuse Accommodated CIF06 EK SAFELOC fuse holders provide an easy method of protecting a wide range of electrical equipment such as lighting, heating, motor and control equipment circuits, and offer significant savings on volume, cost, fitting time and power loss. Medium Voltage Fuses The fuse holders incorporate a unique slide/snap action carrier which eliminates the need for fuse carrier contacts. This provides positive, stress free fitting of fuse and locks the fuse in position ensuring safe insertion and withdrawal from the base. The resulting direct contact between fuse blades and the plated base contacts provides lower watts loss and increased reliability. The base contacts are fully shrouded to protect personnel from direct contact electric shock. The shrouds utilize simple slide/snap action allowing access to the contact terminal screws. They are semicaptive within the base, reducing the risk of loss during cabling. The fuse base, which consists of glass filled, high impact resistant thermoplastic polyester, incorporates a direct 35mm DIN rail mounting facility as well as single screw fixing. Rating Canadian Fuses & Holders SAFEloc fuse holders provide a simple range designed to accommodate the compact range of offset blade fuse to CSA C22.2 No. 106, HRCI-CB. The combination offers significant savings in volume and cost as well as a reduction in fitting time and power loss. Special Purpose Fuses For use with HRCI-CB Fuses. Suitable for Bolted Panel Mounting or DIN Rail Mounting. Tightening Torque To avoid a heat build up it is most important the cable terminal screws are screwed in tight and are holding the cable firmly. A tightening torque of 2.5 to 2.8 Newton meters (N•m) or 22 to 25lb-in is recommended. Fuse Blocks, Holders & Misc. Application Section For additional information, visit www.edisonfuse.com 99 C UL/CSA Fuses Current Limiting LOC se ol e s Dimensions - in (mm) C 0.24 C Catalog Numbers C30F B Special Purpose Fuses UL/CSA Fuses General Purpose D 35mm DIN Rail E C A C F D øK H Canadian Fuses & Holders øJ Catalog Numbers C60F B DIN Rail E G G/2 E Dimensions - in (mm) Amps Series Number Max. Cable mm2 A 30 60 C30 C60 16 35 Fuse Blocks, Holders & Misc. Medium Voltage Fuses G/2 Catalog Numbers C30BS C30FBS C60BS C60FBS B C D 0.09" 2.3mm * 0.10" ø2.5mm 0.22" ø5.5mm F 0.79" 20.0mm * 0.10" ø2.5mm 2.27" 57.7mm 0.22" ø5.5mm 0.63" ø16mm *Hole for front connected 0.09" 2.3mm 100 G H 0.13" 3.3mm C30 0.51" ø13mm Application Section E J 1.0 (25.4) 3.0 (76.2) 1.83 (46.5) 0.09 (2.3) 0.63 (16.0) 1.54 (39.2) 2.27 (57.7) 0.67 (17.0) 0.38 (9.7) 1.15 (29.1) 3.55 (90.0) 2.18 (55.0) 0.13 (3.3) 0.70 (17.7) 1.54 (39.2) 2.68 (67.9) 0.69 (17.5) 0.43 (11.0) types when anti-roatation pin is fitted. 0.13" 3.3mm For additional information, visit www.edisonfuse.com C60 0.89" 22.6mm 2.68" 67.9mm K M6 M8