www.klinkmann.com
Synergy
Enhanced functions,
for more comfort
NEW
TM
Synergy gives now a wider choice of solutions In One by Legrand
for today's demanding markets, in terms of colours and functions.
Scenario controller with touch screen
In One by Legrand
(See p. 590-591)
588
Scenarios controller In One by Legrand
(See p. 590-591)
www.klinkmann.com
COMFORT
- Switches
- Dimmers
- Automatic switches
- Roller blinds control
- Scenarios switches.
(See p. 590-591)
5 DIFFERENT STYLES
- White
- Modern
- Traditional
- Rope edge
- Flat plate.
(See p. 599-629)
Switch
Dimmer
Automatic switch
Roller blinds control
Scenario controller
White
Modern | Silver
Traditional | Satin Brass
Flat plate | Black Nickel
Metalclad
NEW
SURFACE-MOUNTING
- Metalclad
(See p. 628)
Rope Edge
FLEXIBILTY OF GRID SYSTEM
An unrivalled selection
of functions with:
- Synergy range
- Mosaic range.
(See p. 592-598)
+
Synergy Grid system
Synergy Grid for Mosaic
OTHER LEGRAND SYSTEMS AND RANGES FOR YOUR PROJECTS
Intelligent solutions for home
See p. 412-413
In One by Legrand
See p. 440-441
PLC technology
Home networks
See p. 448-449
International standards wiring accessories
See p. 484-485
589
www.klinkmann.com
SynergyTM mechanisms
power line carrier (PLC) and infrared (IR) technologies
7358 12 + 7300 92
7359 11 + 7310 92
7359 16 + 7316 92
7358 14 + 7300 92
7358 18 + 7300 92
Technical information (p. 443)
Front plates selection chart (p. 592)
Particularly suitable for new buildings and heavy renovation
Can be controlled by IR from the same room or by PLC with lighting scenarios controllers (p. 590) or scenarios controllers (p. 591)
Mechanisms to be mounted on front plate (p. 592)
110-230 V± 50/60 Hz
Pack
Cat.Nos
Switches
Pack
1
For the on/off control of local or remote
circuits
The transmitter function is used for the
remote on/off control of other light switches
in the installation
The receiver function is used to execute
commands received (via PLC or IR) from
scenarios controllers (p. 591), or from any
other lighting control in the installation, on
the lighting circuit(s)
3-wire installation in box depth 50 mm
recommended
PLC transmitter/receiver and IR reicever
switches with indicator
Any load
Display, via the indicator light, the status of
White
Dark Grey the output being controlled
7358 11 7359 11
Single switch 1 x 2500 W
1
7358 12 7359 12
PLC transmitter/receiver automatic
switches
7358 14 7359 14
1 x 1000 W - Any load
Automatic switch for control by
detection of the circuit connected
to the terminals
Manual override possible
The transmitter function is used for the on/
off control of other switches or controls in
the installation
The receiver function is used to execute
commands received from scenarios
controllers (p. 591), or from any other
lighting control in the installation, on its
lighting circuit
Adjustable light level, lighting period and
detection sensitivity
Infrared detection
Range: 3 to 10 m
Time delay: 1 s to 16 min
Light level threshold: 3 to 1000 lux.
Horizontal angle: 180°
3-wire installation in box depth 50 mm
recommended
White
1
Double switch 2 x 1000 W
Automatic switches
Cat.Nos
Dark Grey
Dimmer switches
1
1
Lighting scenarios controllers
Switch for on/off/dimming control of the
circuit connected to the terminals
Has 2 factory-set lighting levels accessed
using the + and - buttons
The transmitter function is used for on/off/
dimming control of other light switches in
the installation
The receiver function is used to execute
on/off/dimming commands received from
lighting scenarios controllers (p. 590),
on/off commands received from scenarios
controllers (p. 591), or any other lighting
control in the installation, on its lighting
circuit
3-wire installation in box depth 50 mm
recommended
Self-regulating against overloads
PLC transmitter/receiver and IR receiver
dimmer switches with indicator
Display the light level via LEDs (5 blue
LEDs)
White
Dark Grey Faulty load indicated by red LED
7358 16 7359 16
1 x 300 W
Multi-load
Protected against short-circuits
7358 17 735917
PLC transmitter and IR receiver lighting
scenarios controllers
7358 18 7359 18
Switch on and off a group of
switches or dimmer switches and
manage 2 lighting scenarios
Ideal to increase the number of
control points
2 dedicated keys for ON/OFF and dimming
+/- functions
2 wire connection - Phase and Neutral
Installation in box depth 50 mm
recommended
White
1
Dark Grey
Interfaces and accessories
In One by Legrand (p. 537)
1 x 600 W
Resistive and inductive loads
These products are part of Power Line
Carrier technology system > See p. 440-441
Red catalogue numbers: New products
590
www.klinkmann.com
NEW
SynergyTM mechanisms
power line carrier (PLC) and infrared (IR) technologies (continued)
7359 22 + 7312 92
7358 21 + 7300 92
7358 40
7359 19 + 7310 92
Technical information (p. 444)
Front plates selection chart (p. 592)
Particularly suitable for new buildings and heavy renovation
Can be controlled by IR from the same room or by PLC with lighting scenarios controllers (p. 590) or other scenarios controllers (p. 591)
To be mounted on front plate
110-230 V±
Pack
Cat.Nos
PLC transmitter/receiver and IR receiver
individual blind switches
7358 21 7359 21
Control all types of 230 V±
electric blind motors with end
stops to lower/raise/stop blinds
Slat orientation function by long
press
The transmitter function is used to control
other individual blind switches in the
installation
The receiver function is used to execute,
on the motor connected to the terminals
of the switch, commands received from:
scenarios controllers (p. 591), individual or
centralized electric blind switches
Installation in box depth 50 mm
recommended
Max. loads at 230 V±: 1 x 500 VA
PLC transmitter and IR receiver
centralized blind switches
7358 22 7359 22
Transmitter switch for centralized
control of a set of individual
switches for electric blinds
Can be used, for example, for
simultaneous control of all blinds or a
group of blinds
Also has two auxiliary inputs that can
receive commands via volt-free contacts
from conventional products (time switch,
light-sensitive switch, etc.) to automate
control
2-wire connection Phase and Neutral
Installation in box depth 50 mm
recommended
Indication of activation via blue LED
White
1
1
Roller blinds switches
Pack
Cat.Nos
1
7358 19 7359 19
1
7358 40
White
Dark Grey
Dark Grey
Scenarios controllers
PLC transmitter scenarios controllers
For remote control of all
In One by Legrand functions:
lighting, blinds
Can control 4 scenarios
Indication of activation via blue LED
2-wire connection - Phase and Neutral
Installation in box depth 50 mm
recommended
PLC transmitter scenarios controller
with touch screen
230 V± power supply and
connection to the local area
network (LAN)
UPNP standard
3" 1/2 touch screen
Supplied with front plate
Can control any installation and centralize
control of living scenarios
Used to manage scenarios:
- Launched manually from the screen
- Automatically by 12-month programming
or from a transmitter in the installation
The scenarios can combine the lighting,
blind and multimedia functions in
combination with the Media server
Cat.No 882 22 (p. 536)
Can manage up to 80 control units
Used for visual identification of scenarios
by means of its touch screen
Supervises the installation (can be used
to display the state of a control unit or the
state of the technical detectors)
Installation in 2 x 2-gang Batibox flushmounting box Cat.No 801 24 (p. 734)
Mobile scenarios controllers
In One by Legrand (p. 534)
Red catalogue numbers: New products
591
www.klinkmann.com
SynergyTM grid system
for Mosaic mechanisms
FRONT PLATES FOR MOSAIC MECHANISMS
GRID SYSTEM
1 gang for
1 gang for
2 gang for
2 gang for
2 x 2 gang for
3 x 3 gang for
1 Mosaic module 2 Mosaic modules 3 Mosaic modules 4 Mosaic modules 8 Mosaic modules 18 Mosaic modules
FRONT PLATES
Clip-in carrier plate - No yoke required
Yoke required
Dimensions (mm)
86 x 86
86 x 86
86 x 146
86 x 146
146 x 146
267 x 207
White
7300 91
7300 92
7300 93
7300 94
7301 88
7301 90
Traditional Brushed stainless steel
7330 91
7330 92
7330 93
7330 94
7331 88
7331 90
Traditional Polished stainless steel
7332 91
7332 92
7332 93
7332 94
7333 88
7333 90
Traditional Satin brass
7334 91
7334 92
7334 93
7334 94
7335 88
7335 90
Flat plate Antique Copper
7340 91
7340 92
7340 93
7340 94
-
-
Flat plate Antique Brass
7342 91
7342 92
7342 93
7342 94
-
-
Flat plate Black Nickel
7344 91
7344 92
7344 93
7344 94
-
-
Flat plate Brushed Stainless Steel
7346 91
7346 92
7346 93
7346 94
-
-
-
-
Metalclad
7338 91
7338 92
7338 93
7338 94
Dimensions (mm)
89 x 89(2)
89 x 89(2)
89 x 149(2)
89 x 149(2)
146 x 146
267 x 207
Modern Silver
7310 91
7310 92
7310 93
7310 94
7311 88
7311 90
Modern Nickel
7312 91
7312 92
7312 93
7312 94
7313 88
7313 90
Modern Black nickel
7314 91
7314 92
7314 93
7314 94
7315 88
7315 90
Modern Matt black
7316 91
7316 92
7316 93
7316 94
7317 88
7317 90
Dimensions (mm)
92 x 92(2)
92 x 92(2)
92 x 152(2)
89 x 152(2)
Rope edge
7320 91
7320 92
7320 93
7320 94
Use 7337 88
Use 7337 90
2 x 7354 74
2 x 7354 76
(1)
(1)
(1)
(1)
GRID YOKES
Grid yokes
No yoke required
+
=
Mosaic mechanisms (p. 568)
(1) Supplied with back box
(2) Screw free clip-on front plate
Red catalogue numbers: New products
592
www.klinkmann.com
<<< SYNERGY GRID SYSTEM
Fully integrated
in Synergy finishes
A complete solution from 1 to 24 modules assemblies
for both residential and commercial applications.
Synergy grid modules:
- integration of 1 to 24 grid modules
- front plates available in all Synergy
finishes
2 x 2 gang - 6 modules
grid front plates
2 gang - 4 modules
grid front plates
These products are part of Legrand international wiring accessories offer > See p. 588-629
593
www.klinkmann.com
SynergyTM grid system
for Grid modules
ARCHITRAVES
GRID MODULES
FRONT PLATES WITH SMALL APERTURES
1 gang
2 gang
1 gang
2 gang
1 module
2 modules
1 module
2 modules
3 modules
4 modules
Dimensions (mm)
86 x 36
146 x 36
86 x 86
86 x 86
86 x 146
86 x 146
White
7301 80
7301 81
7301 91
7301 92
7301 93
7301 94
Traditional Brushed stainless steel
7331 80
7331 81
7331 91
7331 92
7331 93
7331 94
Traditional Polished stainless steel
7333 80
7333 81
7333 91
7333 92
7333 93
7333 94
Traditional Satin brass
7335 80
7335 81
7335 91
7335 92
7335 93
7335 94
Flat plate Antique Copper
-
-
7341 91(2)
7341 92(2)
7341 93(2)
7341 94(2)
Flat plate Antique Brass
-
-
7343 91(2)
7343 92(2))
7343 93(2)
7343 94(2)
Flat plate Black Nickel
-
-
7345 91(2)
7345 92(2)
7345 93(2)
7345 94(2)
Flat plate Brushed Stainless Steel
-
-
7347 91(2)
7347 92(2)
7347 93(2)
7347 94(2)
Metalclad
-
-
7339 91
7339 92
7339 93
7339 94
Dimensions (mm)
–
–
89 x 89
89 x 89
89 x 149
89 x 149
Modern Silver
-
-
7311 91
7311 92
7311 93
7311 94
Modern Nickel
-
-
7313 91
7313 92
7313 93
7313 94
Modern Black nickel
-
-
7315 91
7315 92
7315 93
7315 94
Modern Matt black
-
-
7317 91
7317 92
7317 93
7317 94
Dimensions (mm)
–
–
92 x 92(1)
92 x 92(1)
92 x 152(1)
92 x 152(1)
7337 80
7337 81
7321 91
7321 92
7321 93
7321 94
1 x 7354 95
1 x 7354 96
1 x 7354 90
1 x 7354 91
1 x 7354 92
1 x 7354 92
1 x 7354 81
1 x 7354 81
1 x 7354 82
1 x 7354 82
7364 00
7364 00
7364 01
7364 01
Rope edge
GRID YOKES
For White, Traditional and Metalclad
1 x 7335 95
1 x 7354 96
(only for Rope edge) (only for Rope edge)
For Modern and Rope edge
BOXES
Flush-mounting
Flush-mounting with phase barriers
Surface-mounting, steel with knockouts
Surface-mounting, steel without knockouts
Surface-mounting, metal with knockouts
+
-
-
=
(1) Screw free clip-on front plate
(2) Yokes supplied with front plate
Red catalogue numbers: New products
594
www.klinkmann.com
FRONT PLATES WITH SMALL APERTURES
2 x 2 gang
3 x 2 gang
3 x 3 gang
4 x 3 gang
6 modules
8 modules
9 modules
12 modules
18 modules
24 modules
146 x 146
146 x 146
207 x 146
207 x 146
267 x 206
267 x 206
7301 82
7301 83
7301 84
7301 85
7301 86
7301 87
7331 82
7331 83
7331 84
7331 85
7331 86
7331 87
7333 82
7333 83
7333 84
7333 85
7333 86
7333 87
7335 82
7335 83
7335 84
7335 85
7335 86
7335 87
7341 82(2)
7341 83(2)
7341 84(2)
7341 85(2)
7341 86(2)
7341 87(2)
7343 82(2)
7343 83(2)
7343 84(2)
7343 85(2)
7343 86(2)
7343 87(2)
7345 82(2)
7345 83(2)
7345 84(2)
7345 85(2)
7345 86(2)
7345 87(2)
7347 82(2)
7347 83(2)
7347 84(2)
7347 85(2)
7347 86(2)
7347 87(2)
7339 82
7339 83
7339 84
7339 85
7339 86
7339 87
146 x 146
146 x 146
7311 82
7311 83
-
-
-
-
7313 82
7313 83
-
-
-
-
7315 82
7315 83
-
-
-
-
7317 82
7317 83
-
-
-
-
146 x 146
146 x 146
207 x 146
267 x 146
267 x 206
267 x 206
7337 82
7337 83
7337 84
7337 85
7337 86
7337 87
2 x 7354 92
2 x 7354 92
3 x 7354 92
3 x 7354 92
3 x 7354 93
3 x 7354 93
2 x 7354 92
2 x 7354 92
3 x 7354 92
3 x 7354 92
3 x 7354 93
3 x 7354 93
818 52
818 52
818 53
818 53
818 54
818 55
-
-
818 57
818 57
818 58
818 59
7364 18
7364 18
7364 28
7364 28
-
-
7364 22
7364 22
7364 32
7364 32
-
-
Red catalogue numbers: New products
595
www.klinkmann.com
SynergyTM Grid modules
decorative rockers
7395 04
7395 03
7395 05
7398 04
7398 24
7398 44
7398 64
Front plates selection chart (p. 594)
Pack
Cat.Nos
10
10
10
1
1
1
1
7395 04
7395 03
7395 05
7398 04
7398 24
7398 44
7398 64
10
10
10
1
1
1
1
7395 08
7395 07
7395 06
7398 08
7398 28
7398 48
7398 68
10
10
10
1
1
1
1
7395 01
7395 00
7395 02
7398 01
7398 21
7398 41
7398 61
10
10
10
1
1
1
1
7395 14
7395 12
7395 13
7398 14
7398 34
7398 54
7398 74
Single pole switches 10 AX - 250 VA
1-way switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Intermediate switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way push switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Pack
Cat.Nos
10
10
10
1
1
1
1
7396 96
7396 95
7396 97
7398 06
7398 26
7398 46
7398 66
10
10
10
1
1
1
1
7396 86
7396 84
7396 85
7398 16
7398 36
7398 56
7398 76
10
10
10
1
1
1
1
7396 93
7396 92
7396 94
7398 03
7398 23
7398 43
7398 63
10
10
10
1
1
1
1
7396 88
7396 87
7396 89
7398 18
7398 38
7398 58
7398 78
Single pole switches 20 AX - 250 VA
10
10
10
1
1
1
1
7396 79
7396 80
7396 78
7398 19
7398 39
7398 59
7398 79
10
10
10
1
1
1
1
7396 83
7396 82
7396 81
7398 13
7398 33
7398 53
7398 73
1-way switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Intermediate switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way centre off switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way retractive centre off switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
2-way push switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Double pole switches 20 AX - 250 VA
10
10
10
1
1
1
1
7395 98
7396 13
7396 25
7398 10
7398 30
7398 50
7398 70
10
10
10
1
1
1
1
7396 39
7396 38
7396 37
7398 09
7398 29
7398 49
7398 69
1
1
1
1
7398 11
7398 31
7398 51
7398 71
Red catalogue numbers: New products
596
Single pole switches 20 AX - 250 VA
(continued)
1-way switches
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Push to make switch
Modern Silver
Modern Nickel
Rope Edge brass
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
Push to break switch
Flat plate Antique copper
Flat plate Antique brass
Flat plate Black Nickel
Flat plate Brushed Stainless Steel
www.klinkmann.com
SynergyTM Grid modules
white and anthracite rockers without marking
7354 00
7355 00
7354 21
7355 21
7354 47
7355 48
7354 50
7353 65
Front plates selection chart (p. 594)
Pack
10
10
10
10
10
10
Cat.Nos
White
Anthracite
7354 00
7354 01
7354 03
7354 07
7354 05
7354 06
7355 00
7355 01
7355 03
7355 07
7355 05
7355 06
Single pole switches
10 AX - 250 VA
Conform to BS EN 60669-1
1 way
1 way + neon
2 way
Intermediate
2-way push switch
2-way push switch marked "BELL"
Pack
Cat.Nos
Conform to BS EN 60669-2-1
Rotary dimming and push on/off
7354 46 7355 46 2-way - 300 W - push dimmer
7354 48 7355 48 2-way rotary dimmer - for H.F. ballasts 400 W
White
1
1
Anthracite
Time delay switches
White
1
Anthracite
7354 47 7355 47 300 W
Single pole switches
20 AX - 250 VA
10
10
10
10
10
10
10
White
Anthracite
7354 10
7354 11
7354 12
7354 18
7354 13
7354 14
7354 15
7355 10
7355 11
7355 12
7355 18
7355 13
7355 14
7355 15
Conform to BS EN 60669-1
1-way
1-way + neon
2-way
Intermediate
2-way centre off
2-way retractive centre off
2-way push switch
Telephone sockets
White
1 10
1
Anthracite
7354 50 7355 50 BT master
7354 51 7355 51 BT secondary
Data sockets
White
10
Anthracite
7352 56 7353 56 RJ 45 - 8 contacts - cat. 6
Single pole key switches
20 AX - 250 VA
10
10
10
Conform to BS EN 60669-1
White
Anthracite Key supplied
7354 16 7355 16 2-way
7354 17 7355 17 2-way retractive centre off
7354 19 7355 19 Intermediate
Dimmers 100 - 240 VA - 50-60 Hz
Television sockets
White
10
10
Anthracite
7354 40 7355 40 Screened TV single, male
7354 41 7355 41 Screened SAT
Loudspeaker sockets
Double pole switches
20 AX - 250 VA
10
10
10
10
White
Anthracite
7354 20
7354 21
7354 22
7354 25
7355 20
7355 21
7355 22
7355 25
Conform to BS EN 60669-1
Switch
Switch + neon
Push to make
Push to break
Double pole key switches
20 AX - 250 VA
Conform to BS EN 60669-1
Key supplied
7354 23 7355 23 Key switch
7354 24 7355 24 Key switch + neon
White
10
10
White
10
Anthracite
7352 65 7353 65 Hi-Fi loudspeaker socket
Fuse carriers 13 A - 250 VA
White
10
10
Anthracite
7350 30 7351 30 Fuse carrier
7350 31 7351 31 Fuse carrier with screwless terminals
Accessories
Anthracite
10
10
20
10
White
Anthracite
7350 62
7350 60
7354 36
7354 35
7351 62
7351 60
7355 36
7355 35
Indicator - green neon
Indicator - red neon
Blanking plate
Cable outlet
597
www.klinkmann.com
SynergyTM Grid modules
white and anthracite rockers with marking
7396 30
7396 42
7396 71
7396 28
7396 19
Front plates selection chart (p. 594)
Pack
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
598
Cat.Nos
Double pole switches 20 AX - 250 VA
White
Anthracite With "BOILER" marking
7396 30 7396 21 Standard
7396 45 7396 43 With power indicator
With "COOKER HOOD" marking
7396 27 7396 17 Standard
7396 42 7396 46 With power indicator
With "DISH WASHER" marking
7396 29 7396 03 Standard
7396 48 7396 40 With power indicator
With "EXTRACTOR" marking
7396 95 7396 02 Standard
7396 47 7396 44 With power indicator
With "EXTRACTOR FAN" marking
7396 04 7396 02 Standard
7396 49 7396 41 With power indicator
With "EXTRACTOR HOOD" marking
7396 00 7396 15 Standard
7396 53 7396 68 With power indicator
With "FAN" marking
7396 11 7396 20 Standard
7396 55 7396 71 With power indicator
With "FREEZER" marking
7396 06 7396 16 Standard
7396 73 7396 67 With power indicator
With "FRIDGE" marking
7395 94 7396 01 Standard
7396 75 7396 74 With power indicator
With "FRIDGE FREEZER" marking
7395 99 7396 05 Standard
7396 52 7396 59 With power indicator
With "HEATER" marking
7396 31 7396 28 Standard
7396 54 7396 72 With power indicator
With "HOB" marking
7396 23 7396 10 Standard
7396 58 7396 50 With power indicator
With "HOOD" marking
7396 19 7396 22 Standard
7396 61 7396 62 With power indicator
With "MICROWAVE" marking
7396 26 7396 08 Standard
7396 64 7396 65 With power indicator
With "OVEN" marking
7396 34 7396 18 Standard
7396 63 7396 60 With power indicator
Pack
10
10
10
10
10
10
10
10
Cat.Nos
Double pole switches 20 AX - 250 VA
(continued)
White
Anthracite With "TUMBLE DRYER" marking
7396 24 7396 32 Standard
7396 66 7396 56 With power indicator
With "WASHING MACHINE" marking
7396 33 7395 97 Standard
7396 51 7396 57 With power indicator
With "WASTE DISPOSAL" marking
7395 96 7396 07 Standard
7396 76 7396 77 With power indicator
With "WATER HEATER" marking
7396 12 7396 14 Standard
7396 70 7396 69 With power indicator
www.klinkmann.com
SynergyTM white
SynergyTM white
single pole switches
7300 00
single pole push and key switches, rotary dimmers
7300 06
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
Cat.Nos
Single pole plate switches 10 AX - 250 VA
10
10
10
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
ASTA licence
Nominal plate dimensions: 86 x 86 mm
7300 00
1 gang - 1 way
7300 01
1 gang - 2 way
7300 05
1 gang - intermediate
10
10
7300 24
7300 02
10
10
7301 24
7300 03
5
7300 04
5
7300 06
7301 56
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
Cat.Nos
5
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
ASTA licence
Nominal plate dimensions: 86 x 86 mm
7300 07
1 gang - 2 way push switch
5
7300 11
1 gang - 2 way push switch
marked "PRESS"
5
7301 07
1 gang - 2 way push switch
with bell symbol
2 gang - 1 way
2 gang - 2 way
3 gang - 1 way
3 gang - 2 way
Single pole key switch 10 AX - 250 VA
Nominal plate dimensions: 86 x 146 mm
4 gang - 2 way
6 gang - 2 way
10
Conform to BS EN 60669-1: 2000
Key supplied
For flush-mounting, back box to be min. 16 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 08
1 gang - 2 way
Push on/off rotary dimmers 400 W
100 - 240 VA - 50/60 Hz
Single pole plate switches 20 AX - 250 VA
10
10
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
Nominal plate dimensions: 86 x 86 mm
7301 30
1 gang - 1 way
7301 31
1 gang - 2 way
10
10
7301 34
7301 32
2 gang - 1 way
2 gang - 2 way
10
10
7301 35
7301 33
3 gang - 1 way
3 gang - 2 way
Single pole push switches 10 A - 250 VA
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7301 56
1 gang - 2 way
1
7301 57
1
7300 49
2 gang - 2 way
Nominal plate dimensions: 86 x 146 mm
4 gang - 2 way
599
www.klinkmann.com
SynergyTM white
double pole switches
7301 10
7300 22
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
Cat.Nos
Double pole switches 20 A - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 25 mm deep
Use cord outlet accessory box Cat.No 7300 53
for external cord outlet
ASTA licence
Nominal plate dimensions: 86 x 86 mm
DP switch
10
7300 10
10
7300 12
DP switch + red LED power indicator
LED invisible until activated
10
7301 10
DP switch marked "WATER HEATER"
10
7301 12
DP switch marked "WATER HEATER"
+ red LED power indicator
LED invisible until activated
SynergyTM white
telephone, data and TV sockets
10
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 22
DP switch
10
7300 23
10
7301 22
COO
5
7300 20
Pack
10
10
10
Cat.Nos
Telephone sockets
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 50
UK master
7300 51
UK secondary
7300 54
RJ 11/RJ 12 - single
Data sockets - Cat. 6
1
Rapid cable connection
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 56
RJ 45 - single
1
7300 57
RJ 45 - twin
Television sockets
10
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 40
Screened TV socket
single - male
10
7301 40
Screened TV socket
single - female
DP switch + red LED power indicator
LED invisible until activated
10
7301 44
Screened TV socket
single pass trough - female
DP switch red rocker marked "COOKER"
10
7301 45
Screened TV socket
single terminal - female
1
7300 41
SAT socket
single - "F" type
10
7300 42
TV-R socket
TV-R-SAT socket
"F" type
KER
Nominal plate dimensions: 146 x 86 mm
DP switch
5
7300 21
DP switch + red LED power indicator
LED invisible until activated
1
7300 43
5
7301 20
DP switch red rocker marked "COOKER"
1
7300 44
COO
600
7300 43
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Double pole switches 45 A - 250 VA
Conform to BS EN 60669-1
ASTA licence
7300 57
7300 50
KER
Nominal plate dimensions: 86 x 146 mm
TV-R-SAT + telephone socket
www.klinkmann.com
SynergyTM white
British standard socket outlets
7300 65
7300 60
7300 70
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
10
5
10
5
Cat.Nos
Socket outlets 13 A - 250 VA
Conform to BS 1363: Part. 2
For flush-mounting, back box to be min. 25 mm deep
ASTA licence
Unswitched
7300 65
1 gang
Nominal plate dimensions: 86 x 86 mm
7300 75
2 gang
Nominal plate dimensions: 86 x 146 mm
Single pole - switched
Fitted with traditional earth pin release shutter
and single earth terminal
7300 66
1 gang
Nominal plate dimensions: 86 x 86 mm
7300 76
2 gang
Nominal plate dimensions: 86 x 146 mm
Socket outlets 13 A - 250 VA
Special earth pin
5
10
5
For flush-mounting, back box to be min. 25 mm deep
Single pole - switched
7391 00
1 gang
Nominal plate dimensions: 86 x 86 mm
Double pole - switched
7300 67
1 gang
Nominal plate dimensions: 86 x 86 mm
7300 77
2 gang
Nominal plate dimensions: 86 x 146 mm
Pack
10
5
10
5
10
Cat.Nos
Double pole socket outlets 13 A - 250 VA
Conform to BS 1363: Part. 2
Patented 3 pin safety shutters mechanism
2 earth terminals
For flush-mounting, back box to be min. 25 mm deep
ASTA licence
Switched
7300 60
1 gang
Nominal plate dimensions: 86 x 86 mm
7300 70
2 gang
Nominal plate dimensions: 86 x 146 mm
Switched with red LED power indicator
LED invisible until activated
7300 61
1 gang
Nominal plate dimensions: 86 x 86 mm
7300 71
2 gang
Nominal plate dimensions: 86 x 146 mm
Switched for standard and clean earth
applications
7300 64
1 gang
Nominal plate dimensions: 86 x 86 mm
5
7300 74
10
7301 62
5
7301 61
2 gang
Nominal plate dimensions: 86 x 146 mm
Switched with red rocker
1 gang
Nominal plate dimensions: 86 x 86 mm
2 gang
Nominal plate dimensions: 86 x 146 mm
601
www.klinkmann.com
SynergyTM white
British standard socket outlets (continued)
7300 89
7300 69
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
Cat.Nos
Socket outlets 15 A - 250 VA
10
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 88
1 gang - unswitched
10
7300 89
SynergyTM white
Euro-US, German standard socket outlets and shaver socket
7300 84
Pack
10
5
7300 86
Cat.Nos
2 gang unswitched
Nominal plate dimensions: 86 x 146 mm
Socket outlet combined UK / Euro - US
13 A - 10/16 A
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 84
1 gang - unswitched
UK - 13 A / EURO-US - 10/16 A - 250 VA
1 gang - switched, single pole
Conform to SASO No LIC 203182
Standard terminal screws
For flush-mounting, back box to be min. 35 mm deep
7300 85
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
7300 87
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Euro - US socket outlets
10
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
10 A - 127 VA
16 A - 250 VA
7300 80
1 gang - unswitched
10
7300 81
2 gang - unswitched
10
7300 82
1 gang - switched
10
7300 83
1 gang - unswitched + 10 AX 1 way switch
Sockets outlets 15 A - 127 VA - SASO
5
7300 83
Socket outlets 5 A - 250 V±
10
Conform to BS 546
Patented 3 pin safety shutter mechanism
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 68
1 gang - unswitched
10
7300 69
1 gang - switched, single pole
German standard socket outlet
10/16 A - 250 V±
10
Shaver socket
Socket outlet 2 A - 250 V±
10
Conform to BS 546
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 59
1 gang - unswitched
1
602
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7300 87
1 gang - unswitched
Conform to BS EN 61558-2-5
Suitable for use with European, British and Australian
2 pin plugs
Rating: 20 VA
IP 24
Screwless live and neutral terminals
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 146 x 86 mm
7300 90
240 V - 120 V± - 50/60 Hz
www.klinkmann.com
SynergyTM white
SynergyTM white
7300 26
7300 96
cooker control units, fused connection units and cable outlets
blanking plates, accessories and surface mounting boxes
7301 58
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
5
5
Cat.Nos
Cooker control units 250 V±
Conform to BS 4177
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 86 x 146 mm
7300 28
45 A DP switch + 13 A DP
switched socket outlet
7300 29
COO
KER
45 A DP switch + 13 A DP
switched socket outlet + red LED
power indicator
LED invisible until activated
7364 06
7364 11
Pack
Cat.Nos
10
7300 95
10
7300 96
Blanking plates
1 gang
Nominal plate dimensions: 86 x 86 mm
2 gang
Nominal plate dimensions: 86 x 146 mm
Fused connection units 13 A - 250 V±
10
Conform to BS 1363: Part 4
Fused 13 A (fuse supplied)
Front cable outlet with cord grip
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
Unswitched
7300 32
With cord outlet
10
7300 33
With red LED power indicator
LED invisible until activated
Accessories
10
10
Double pole switched
With cord outlet
10
7300 36
10
7300 37
With red LED power indicator and cord outlet
LED invisible until activated
10
7301 39
With cord outlet and marked
"WATER HEATER"
10
Cable outlets
10
Conform to BS 5733
Fitted with cable clamp and outlet membrane
Nominal plate dimensions: 86 x 86 mm
20 A - 250 VA
For flush-mounting, back box to be min. 35 mm deep
7300 19
With terminal block
5
45 A - 250 VA
For flush-mounting, back box to be min. 45 mm deep
7300 26
With terminal block
Electronic LED
All relevant Synergy functions are designed to
accept the LED packs for fitting at time of installation
or retrospectively by qualified person
Can be used with fluorescent light
7301 58
Electronic LED locator pack
green diodes: max. current 0.2 mA
provides illumination to locate function such
as switches in low light
7300 58
Electronic LED power indicator pack
red diodes: nominal current 2 mA
provides indication of "power on" condition
in such functions as sockets and control switches
Cord outlet
7300 53
1 gang box
Nominal plate dimensions: 86 x 86 mm
Surface-mounting moulded boxes
10
7364 06
1 gang, 35 mm deep
86 x 86 mm
10
7364 07
1 gang, 50 mm deep and cable grip
86 x 86 mm
5
7364 10
2 gang, 35 mm deep
86 x 146 mm
5
7364 11
2 gang, 50 mm deep and cable grip
86 x 146 mm
5
7364 13
2 x 1 gang, 35 mm deep
86 x 172 mm
603
www.klinkmann.com
SynergyTM Modern
single pole switches
7310 02
7310 00
7310 07
7314 03
Terminal screws captive and backed off ready for cabling - large angled terminal entries
Compact mechanism for maximised wiring space
Pack
604
Cat.Nos
1
1
1
1
7310 00
7312 00
7314 00
7316 00
1
1
1
1
7310 01
7312 01
7314 01
7316 01
1
1
1
1
7310 05
7312 05
7314 05
7316 05
1
1
1
1
7310 02
7312 02
7314 02
7316 02
1
1
1
1
7310 03
7312 03
7314 03
7316 03
1
1
1
1
7310 04
7312 04
7314 04
7316 04
Single pole plate switches 10 AX - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 1-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang - intermediate switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
3 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
4 gang - 2-way switch
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Pack
Cat.Nos
1
1
1
1
7311 31
7313 31
7315 31
7317 31
1
1
1
1
7311 32
7313 32
7315 32
7317 32
1
1
1
1
7311 33
7313 33
7315 33
7317 33
Single pole plate switches 20 AX - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
3 gang - 2-way switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Single pole push switches 10 A - 250 VA
1
1
1
1
7310 07
7312 07
7314 07
7316 07
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 2-way push switch
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
www.klinkmann.com
SynergyTM white
SynergyTM white
7300 26
7300 96
cooker control units, fused connection units and cable outlets
blanking plates, accessories and surface mounting boxes
7301 58
Front plates: white thermoset
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with faceplate screw caps
Surface mounting boxes (p. 603)
Pack
5
5
Cat.Nos
Cooker control units 250 V±
Conform to BS 4177
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 86 x 146 mm
7300 28
45 A DP switch + 13 A DP
switched socket outlet
7300 29
COO
KER
45 A DP switch + 13 A DP
switched socket outlet + red LED
power indicator
LED invisible until activated
7364 06
7364 11
Pack
Cat.Nos
10
7300 95
10
7300 96
Blanking plates
1 gang
Nominal plate dimensions: 86 x 86 mm
2 gang
Nominal plate dimensions: 86 x 146 mm
Fused connection units 13 A - 250 V±
10
Conform to BS 1363: Part 4
Fused 13 A (fuse supplied)
Front cable outlet with cord grip
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
Unswitched
7300 32
With cord outlet
10
7300 33
With red LED power indicator
LED invisible until activated
Accessories
10
10
Double pole switched
With cord outlet
10
7300 36
10
7300 37
With red LED power indicator and cord outlet
LED invisible until activated
10
7301 39
With cord outlet and marked
"WATER HEATER"
10
Cable outlets
10
Conform to BS 5733
Fitted with cable clamp and outlet membrane
Nominal plate dimensions: 86 x 86 mm
20 A - 250 VA
For flush-mounting, back box to be min. 35 mm deep
7300 19
With terminal block
5
45 A - 250 VA
For flush-mounting, back box to be min. 45 mm deep
7300 26
With terminal block
Electronic LED
All relevant Synergy functions are designed to
accept the LED packs for fitting at time of installation
or retrospectively by qualified person
Can be used with fluorescent light
7301 58
Electronic LED locator pack
green diodes: max. current 0.2 mA
provides illumination to locate function such
as switches in low light
7300 58
Electronic LED power indicator pack
red diodes: nominal current 2 mA
provides indication of "power on" condition
in such functions as sockets and control switches
Cord outlet
7300 53
1 gang box
Nominal plate dimensions: 86 x 86 mm
Surface-mounting moulded boxes
10
7364 06
1 gang, 35 mm deep
86 x 86 mm
10
7364 07
1 gang, 50 mm deep and cable grip
86 x 86 mm
5
7364 10
2 gang, 35 mm deep
86 x 146 mm
5
7364 11
2 gang, 50 mm deep and cable grip
86 x 146 mm
5
7364 13
2 x 1 gang, 35 mm deep
86 x 172 mm
603
www.klinkmann.com
SynergyTM Modern
telephone and data sockets
7310 50
7312 56
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 50
7312 50
7314 50
7316 50
1
1
1
1
7310 51
7312 51
7314 51
7316 51
1
1
1
1
7310 54
7312 54
7314 54
7316 54
Telephone sockets
For flush-mounting, back box to be min. 35 mm deep
UK master
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
UK secondary
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
RJ 11 / RJ 12 - single
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
SynergyTM Modern
television sockets
7316 42
7314 43
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 40
7312 40
7314 40
7316 40
1
1
1
1
7310 41
7312 41
7314 41
7316 41
1
1
1
1
7310 42
7312 42
7314 42
7316 42
1
1
1
1
7310 43
7312 43
7314 43
7316 43
Data sockets Cat. 6
606
1
1
1
1
7310 56
7312 56
7314 56
7316 56
1
1
1
1
7310 57
7312 57
7314 57
7316 57
Rapid cable connection
For flush-mounting, back box to be min. 35 mm deep
RJ 45 - single
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
RJ 45 - twin
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Television sockets
For flush-mounting, back box to be min. 35 mm deep
Screened
TV socket - single male
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
SAT socket - single "F" type
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
TV-R socket
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
TV-R-SAT socket - "F" type
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Home networks (p. 450)
www.klinkmann.com
SynergyTM Modern
British standard socket outlets
7314 70
7312 61
7312 88
7312 71
7310 89
Terminal screws captive and backed off ready for cabling - large angled terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 65
7312 65
7314 65
7316 65
1
1
1
1
7310 75
7312 75
7314 75
7316 75
Socket outlets 13 A - 250 VA
Conform to BS EN 1363: Part. 2
Patented 3 pin safety shutters mechanism 2 earth
terminals
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang unswitched
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Pack
Cat.Nos
1
1
1
1
7310 88
7312 88
7314 88
7316 88
1
1
1
1
7310 89
7312 89
7314 89
7316 89
1
1
1
1
7310 60
7312 60
7314 60
7316 60
1
1
1
1
7310 61
7312 61
7314 61
7316 61
1
1
1
1
7310 70
7312 70
7314 70
7316 70
1
1
1
1
7310 71
7312 71
7314 71
7316 71
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang switched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Socket outlets 15 A - 250 VA SASO
Double pole socket outlets 13 A - 250 VA
Conform to BS EN 1363: Part. 2
Patented 3 pin safety shutters mechanism 2 earth
terminals
Rapid cable connection
For flush-mounting, back box to be min. 25 mm deep
1 gang switched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang switched with red LED
LED invisible until activated
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang switched
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang switched with red LED
LED invisible until activated
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Socket outlets 15 A - 250 VA
1
1
1
1
7310 85
7312 85
7314 85
7316 85
1
1
1
1
7310 86
7312 86
7314 86
7316 86
Conform to SASO No. LIC 203182
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang unswitched
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
BS plugs (p. 760)
607
www.klinkmann.com
SynergyTM Modern
SynergyTM Modern
7314 69
7310 81
British standard socket outlets (continued)
7316 59
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
1
1
1
1
1
1
1
1
Cat.Nos
7310 68
7312 68
7314 68
7316 68
7310 69
7312 69
7314 69
7316 69
Socket outlets 5 A - 250 VA
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang switched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Socket outlets 2 A - 250 VA
1
1
1
1
7310 59
7312 59
7314 59
7316 59
Conform to BS 546
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Euro-US standard socket outlets and shaver sockets
7312 90
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 80
7312 80
7314 80
7316 80
1
1
1
1
7310 81
7312 81
7314 81
7316 81
1
1
1
1
7310 84
7312 84
7314 84
7316 84
Euro-US socket outlets 10/16 A - 250 VA
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang unswitched
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
1 gang + 1 way switch 10 AX
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Shaver sockets
1
1
1
1
608
7312 84
7310 90
7312 90
7314 90
7316 90
Conform to BS EN 61558-2-5
Suitable for use with European, British and Australian
2 pin plugs
Rating: 20 VA
IP 24
Screwless live and neutral terminals
For flush-mounting, back box to be min. 45 mm deep
240 V / 120 V - 50/60 Hz
Nominal plate dimensions: 149 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
www.klinkmann.com
SynergyTM Modern
RCD sockets, cooker control units and cable outlets
7310 29
7312 19
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
1
1
1
1
1
1
1
1
Cat.Nos
7310 97
7312 97
7314 97
7316 97
7310 98
7312 98
7314 98
7316 98
RCD sockets 13 A - 250 VA
Conform to BS 7288 and BS 1363: Part. 2
Maximum operating current 16 A
Incorporates a “test and reset” button
For flush-mounting, back box to be min. 25 mm deep
2 gang - DP 30 mA
Active: Electrical latching trips on power failure
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang - DP 30 mA
Passive: Mechanical latching does not trip on
power failure
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Cooker control units - 250 VA
1
1
1
1
7310 29
7312 29
7314 29
7316 29
Conform to BS 4177: 1992
For flush-mounting, back box to be min 47 mm deep
45 A DP switch + 13 A DP switched socket outlet
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Cable outlets
1
1
1
1
7310 19
7312 19
7314 19
7316 19
1
1
1
1
7310 26
7312 26
7314 26
7316 26
SynergyTM Modern
fused connection units
7312 30
7310 33
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 32
7312 32
7314 32
7316 32
1
1
1
1
7310 30
7312 30
7314 30
7316 30
1
1
1
1
7310 31
7312 31
7314 31
7316 31
1
1
1
1
7310 33
7312 33
7314 33
7316 33
Fused connection units 13 A - 250 VA
Conform to BS 1363: Part. 4
Front cable outlet with cord grip
Fuses supplied
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 25 mm deep
Unswitched - with cord outlet
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Unswitched - without cord outlet
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Unswitched - with red LED power indicator
LED invisible until activated
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Unswitched - with red LED power indicator + cord
outlet
LED invisible until activated
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
Conform to BS 5733
Fitted with clamp and outlet membrane
20 A - 250 VA
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
45 A - 250 VA
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
609
www.klinkmann.com
SynergyTM Modern
SynergyTM Modern
7316 35
7314 96
fused connection units (continued)
7312 34
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
610
Cat.Nos
1
1
1
1
7310 36
7312 36
7314 36
7316 36
1
1
1
1
7310 34
7312 34
7314 34
7316 34
1
1
1
1
7310 35
7312 35
7314 35
7316 35
1
1
1
1
7310 37
7312 37
7314 37
7316 37
Fused connection units 13 A - 250 VA
Conform to BS 1363: Part. 4
Front cable outlet with cord grip
Fuses supplied
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 25 mm deep
DP switched - with cord outlet
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
DP switched - without cord outlet
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
DP switched - with red LED power indicator
LED invisible until activated
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
DP switched - with red LED power indicator +
cord outlet
LED invisible until activated
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
blanking plates, cord outlets
7310 52
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
1
7310 95
7312 95
7314 95
7316 95
1
1
1
1
7310 96
7312 96
7314 96
7316 96
Blanking plates
1 gang
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
2 gang
Nominal plate dimensions: 89 x 149 mm
Silver
Nickel
Black Nickel
Matt Black
Cord outlets
1
1
1
1
7310 52
7312 52
7314 52
7316 52
1 gang
Nominal plate dimensions: 89 x 89 mm
Silver
Nickel
Black Nickel
Matt Black
www.klinkmann.com
SynergyTM Rope edge
single pole switches
7320 06
7320 00
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Single pole plate switches 10 AX - 250 VA
1
1
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 00
1 gang - 1 way
7320 01
1 gang - 2 way
7320 05
1 gang - intermediate
1
7320 02
2 gang - 2 way
1
7320 03
3 gang - 2 way
1
Nominal plate dimensions: 92 x 152 mm
7320 04
4 gang - 2 way
1
7320 06
SynergyTM Rope edge
dimmers, isolator switch, double pole switches
7320 12
7320 23
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Push on/off rotary dimmers 400 W
100-240 V - 50/60 Hz
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 92 x 92 mm
7321 56
1 gang - 2 way
1
7321 57
2 gang - 2 way
Isolator switch 10 A - 250 VA
6 gang - 2 way
1
Double pole switches 20 A - 250 VA
Single pole plate switches 20 AX - 250 VA
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
Nominal plate dimensions: 92 x 92 mm
7321 31
1 gang - 2 way
1
7321 32
2 gang - 2 way
1
7321 33
3 gang - 2 way
Conform to BS EN 60947-3: 1992
Switch locking feature, white rocker
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 09
3 pole isolator switch
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 10
DP switch
1
7320 14
DP switch + cord outlet
1
7320 16
DP switch + cord outlet +
red LED power indicator
1
7320 12
DP switch + red LED power indicator
Single pole push switch 10 A - 250 VA
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 07
1 gang - 2-way push switch
Double pole switches 45 A - 250 VA
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 45 mm deep
Red rocker
Nominal plate dimensions: 92 x 92 mm
7320 22
DP switch
1
7320 23
DP switch + red LED power indicator
611
www.klinkmann.com
SynergyTM Rope edge
SynergyTM Rope edge
British standard socket outlets
telephone, data, TV sockets
7320 56
7320 57
7320 42
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
1
1
1
Cat.Nos
Telephone sockets
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 50
UK master
7320 51
UK secondary
7320 54
RJ 11 / RJ 12 - single
7320 71
7320 65
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
1
Cat.Nos
Socket outlets 13 A - 250 VA
Conform to BS 1363: Part. 2
Patented 3 pin safety shutters mechanism
2 earth terminals
For flush-mounting, back box to be min. 25 mm deep
Unswitched
7320 65
1 gang
Nominal plate dimensions: 92 x 92 mm
Data sockets Cat.6
1
Rapid cable connection
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 56
RJ 45 - single
1
7320 57
1
7320 75
2 gang
Nominal plate dimensions: 92 x 152 mm
Double pole socket outlets 13 A - 250 VA
RJ 45 - twin
Television sockets
1
612
For flush-mounting, back box to be min. 35 mm deep
Screened
Nominal plate dimensions: 92 x 92 mm
7320 40
TV socket
single - male
1
Conform to BS 1363: Part.2
Patented 3 pin safety shutters mechanism
2 earth terminals
For flush-mounting, back box to be min. 25 mm deep
Switched
7320 60
1 gang
Nominal plate dimensions: 92 x 92 mm
1
7320 61
1 gang with red LED power indicator
Nominal plate dimensions: 92 x 92 mm
1
7320 41
SAT socket
single - "F" type
1
7320 70
2 gang
Nominal plate dimensions: 92 x 152 mm
1
7320 42
TV-R socket
1
7320 71
2 gang with red LED power indicator
Nominal plate dimensions: 92 x 152 mm
1
7320 43
TV-R-SAT socket
"F" type
www.klinkmann.com
SynergyTM Rope edge
SynergyTM Rope edge
British standard socket outlets (continued)
7320 89
7320 69
Euro-US socket outlets and shaver socket
7320 59
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Socket outlets 15 A - 250 VA
1
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 35 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 88
1 gang - unswitched
1
7320 89
1 gang - switched, single pole
7320 83
7320 81
7320 90
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Euro-US socket outlets 10/16 A - 250 VA
1
For flush-mounting, back box to be min.
25 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 80
1 gang unswitched
1
7320 81
2 gang unswitched
1
7320 83
1 gang + 10 AX - 1 way switch
Socket outlets 15 A - 250 VA - SASO
1
1
Conform to SASO No LIC 203182
For flush-mounting, back box to be min. 35 mm deep
Unswitched
7320 85
1 gang
Nominal plate dimensions: 92 x 92 mm
7320 86
Shaver socket
2 gang
Nominal plate dimensions: 92 x 152 mm
1
Conforms to BS EN 61558-2-5
Suitable for use with European, British and Australian
2 pin plugs
Rating: 20 VA
IP 24
Screwless live and neutral terminals
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 152 x 92 mm
7320 90
240 / 115 V± - 50/60 Hz
Socket outlets 5 A - 250 VA
1
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to min. 25 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 68
1 gang - unswitched
1
7320 69
1 gang - switched, single pole
Socket outlet 2 A - 250 VA
1
Conform to BS 546
For flush-mounting, back box to be min. 25 mm deep
Nominal plate dimensions: 92 x 92 mm
7320 59
1 gang - unswitched
613
www.klinkmann.com
SynergyTM Rope edge
SynergyTM Rope edge
fused connection units
7320 31
7320 32
RCD sockets, cooker control unit, cable outlets, blanking plates,
cord outlet
7320 36
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Fused connection units 13 A - 250 VA
1
Conform to BS 1363: Part 4
Front cable outlet with cord grip
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min.
25 mm deep
Nominal plate dimensions: 92 x 92 mm
Unswitched
7320 30
Without cord outlet
1
7320 32
With cord outlet
1
7320 31
With red LED power indicator
LED invisible until activated
1
7320 33
With red LED power indicator + cord outlet
LED invisible until activated
1
Double pole - switched
7320 34
Without cord outlet
1
7320 36
7320 95
7320 96
Slim front plates: clip-on electroplated zinc polished diecast plate with
electrophoretic gloss brass lacquer, anthracite interiors, matching
decorative rockers (except where otherwise indicated)
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
1
1
Cat.Nos
Conform to BS 7288 and BS 1363: Part 2
Maximum operating current 16 A
Incorporate a "test and reset" button
For flush-mounting back box to be min. 25 mm deep
Nominal plate dimensions: 92 x 152 mm
RCD unit 2 gang - double pole - 30 mA
7320 97
Active: electrical latching trips on
power failure
7320 98
7320 35
With red LED power indicator
LED invisible until activated
1
7320 37
With red LED power indicator + cord outlet
LED invisible until activated
Passive: mechanical latching does not
trip on power failure
Cooker control unit 250 VA
1
Conform to BS 4177: 1992
For flush-mounting, back box to be min. 45 mm deep
Nominal plate dimensions: 92 x 152 mm
7320 29
45 A DP switch + 13 A DP switched
socket outlet + red LED power indicator
With cord outlet
1
RCD sockets 13 A - 250 VA
Cable outlets
1
Conform to BS 5733
Fitted clamp and outlet membrane
Nominal plate dimensions: 92 x 92 mm
20 A - 250 VA
7320 19
With terminal block
1
7320 26
1
7320 95
1
7320 96
45 A - 250 VA
With terminal block
Blanking plates
1 gang
Nominal plate dimensions: 92 x 92 mm
2 gang
Nominal plate dimensions: 92 x 152 mm
Cord outlet
1
614
7320 52
1 gang
Nominal plate dimensions: 92 x 92 mm
www.klinkmann.com
SynergyTM Traditional
single pole switches
7330 00
7334 02
7334 07
7330 06
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy lacquer coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
Single pole plate switches 10 AX - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 1-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang - intermediate switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
3 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
4 gang - 2-way switch
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1
1
1
7330 00
7332 00
7334 00
1
1
1
7330 01
7332 01
7334 01
1
1
1
7330 05
7332 05
7334 05
1
1
1
7330 02
7332 02
7334 02
1
1
1
7330 03
7332 03
7334 03
1
1
1
7330 04
7332 04
7334 04
1
1
1
6 gang - 2-way switch
Nominal plate dimensions: 86 x 146 mm
7330 06
Brushed stainless steel
7332 06
Polished stainless steel
7334 06
Satin brass
Pack
Cat.Nos
1
1
1
7331 31
7333 31
7335 31
1
1
1
7331 32
7333 32
7335 32
1
1
1
7331 33
7333 33
7335 33
Single pole plate switches 20 AX - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
3 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Single pole push switches 10 A - 250 VA
1
1
1
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 16 mm deep
1 gang - 2-way push switch
Nominal plate dimensions: 86 x 86 mm
7330 07
Brushed stainless steel
7332 07
Polished stainless steel
7334 07
Satin brass
615
www.klinkmann.com
SynergyTM Traditional
SynergyTM Traditional
dimmers and isolator switches
7333 57
7331 56
double pole switches
7334 09
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7331 56
7333 56
7335 56
1
1
1
7331 57
7333 57
7335 57
Push on/off rotary dimmers 400 W
100-240 VA - 50/60 Hz
Conform to BS EN 60669-1-2
For flush-mounting, back box to be min. 25 mm deep
1 gang - 2 way
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang - 2 way
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
7332 10
7334 10
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 10
7332 10
7334 10
1
1
1
7330 14
7332 14
7334 14
1
1
1
7330 16
7332 16
7334 16
1
1
1
7330 12
7332 12
7334 12
Isolator switches 10 A - 250 VA
1
1
1
616
Conform to BS EN 60947-3: 1992
Switch locking feature
For flush-mounting, back box to be min. 16 mm deep
3 pole isolator switch
Nominal plate dimensions: 86 x 86 mm
7330 09
Brushed stainless steel
7332 09
Polished stainless steel
7334 09
Satin brass
7330 12
Double pole switches 20 A - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 25 mm deep
Use cord outlet accessory Cat.No 7300 53
for external cord outlet
Double pole switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Double pole switch + cord outlet
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switch + cord outlet + red LED power indicator
LED invisible until activated
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switch + red LED power indicator
LED invisible until activated
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
www.klinkmann.com
SynergyTM Traditional
SynergyTM Traditional
7330 23
7330 50
double pole switches (continued)
7332 20
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 22
7332 22
7334 22
1
1
1
7330 20
7332 20
7334 20
1
1
1
1
1
1
7330 23
7332 23
7334 23
7330 21
7332 21
7334 21
Double pole switches 45 A - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 45 mm deep
1 gang switch
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switch large plate
Nominal plate dimensions: 146 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switch + red LED power indicator
LED invisible until activated
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switch + red LED power indicator large
plate
LED invisible until activated
Nominal plate dimensions: 146 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
telephone and data sockets
7334 57
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.No
1
1
1
7330 50
7332 50
7334 50
1
1
1
7330 51
7332 51
7334 51
1
1
1
7330 54
7332 54
7334 54
Telephone sockets
For flush-mounting, back box to be min. 35 mm deep
UK master
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
UK secondary
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
RJ 11/RJ 12 - single
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Data sockets Cat. 6
1
1
1
7330 56
7332 56
7334 56
1
1
1
7330 57
7332 57
7334 57
Rapid cable connection
For flush-mounting, back box to be min. 35 mm deep
RJ 45 - single
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
RJ 45 - twin
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
617
www.klinkmann.com
SynergyTM Traditional
television sockets
7330 43
7332 42
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
618
Cat.Nos
1
1
1
7330 40
7332 40
7334 40
1
1
1
7330 41
7332 41
7334 41
1
1
1
7330 42
7332 42
7334 42
1
1
1
7330 43
7332 43
7334 43
Television sockets
For flush-mounting, back box to be min. 35 mm deep
Screened
TV socket - single male
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
SAT socket - single "F" type
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
TV-R socket
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
TV-R-SAT socket - "F" type
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
SynergyTM Traditional
British standard socket outlets
7330 65
7334 75
7332 60
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 65
7332 65
7334 65
1
1
1
7330 75
7332 75
7334 75
Socket outlets 13 A - 250 VA
Conform to BS 1363: Part. 2
Patented 3 pin safety shutters mechanism
2 earth terminals
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang unswitched
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Double pole socket outlets 13 A - 250 VA
Conform to BS 1363: Part. 2
Patented 3 pin safety shutters mechanism,
2 earth terminals
For flush-mounting, back box to be min. 25 mm deep
1 gang switched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switched with red LED power indicator
LED invisible until activated
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang switched
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1
1
1
7330 60
7332 60
7334 60
1
1
1
7330 61
7332 61
7334 61
1
1
1
7330 70
7332 70
7334 70
1
1
1
2 gang switched with red LED power indicator
LED invisible until activated
Nominal plate dimensions: 86 x 146 mm
7330 71
Brushed stainless steel
7332 71
Polished stainless steel
7334 71
Satin brass
1
1
1
2 gang switched outboard for standard and clean
earth applications
Nominal plate dimensions: 86 x 146 mm
7330 74
Brushed stainless steel
7332 74
Polished stainless steel
7334 74
Satin brass
www.klinkmann.com
SynergyTM Traditional
British standard socket outlets (continued)
7330 89
7334 69
Cat.Nos
1
1
1
7330 88
7332 88
7334 88
1
1
1
7330 89
7332 89
7334 89
Socket outlets 15 A - 250 VA
Conform to BS 546
Patented 3 pin safety shutters mechanism,
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switched - single pole
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Socket outlets 15 A - 250 VA - SASO
1
1
1
1
1
1
7330 85
7332 85
7334 85
7330 86
7332 86
7334 86
Euro-US socket outlets and shaver sockets
7332 59
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
SynergyTM Traditional
Conform to SASO Lic. 203182
For flush-mounting, back box to be min. 35 mm deep
1 gang
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
7330 81
1
1
1
7330 68
7332 68
7334 68
1
1
1
7330 69
7332 69
7334 69
7332 90
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 80
7332 80
7334 80
1
1
1
7330 81
7332 81
7334 81
1
1
1
7330 83
7332 83
7334 83
Euro - US socket outlets 10/16 A - 250 VA
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang + 1-way switch 10 AX
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Shaver sockets
Socket outlets 5 A - 250 VA
Conform to BS 546
Patented 3 pin safety shutters mechanism,
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
1 gang switched - single pole
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
7334 80
1
1
1
Conform to BS EN 61558-2-5
Suitable for use with European, British and Australian
2 pin plugs
Rating: 20 VA
IP 24
Screwless live and neutral terminals
For flush-mounting, back box to be min. 45 mm deep
240/120 VA - 50/60 Hz
Nominal plate dimensions: 146 x 86 mm
7330 90
Brushed stainless steel
7332 90
Polished stainless steel
7334 90
Satin brass
Socket outlets 2 A - 250 VA - SASO
1
1
1
Conform to BS 546
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
7330 59
Brushed stainless steel
7332 59
Polished stainless steel
7334 59
Satin brass
619
www.klinkmann.com
SynergyTM Traditional
RCD sockets, cooker control units, cable outlets
7332 97
7332 29
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
RCD sockets 13 A - 250 VA
1
1
1
Conform to BS 7288 and BS 1363: Part. 2
Maximum operating current 16 A
Incorporates a «test and reset» button
For flush-mounting, back box to be min. 25 mm deep
2 gang - DP 30 mA
Active: Electrical latching trips on power failure
Nominal plate dimensions: 86 x 146 mm
7330 97
Brushed stainless steel
7332 97
Polished stainless steel
7334 97
Satin brass
1
1
1
2 gang - DP 30 mA
Passive: Mechanical latching does not trip on
power failure
Nominal plate dimensions: 86 x 146 mm
7330 98
Brushed stainless steel
7332 98
Polished stainless steel
7334 98
Satin brass
Cooker control units - 250 VA
1
1
1
Conform to BS 4177: 1992
For flush-mounting, back box to be min. 47 mm deep
45 A DP switch + 13 A DP switched socket outlet
with red LED power indicator
Nominal plate dimensions: 86 x 146 mm
7330 29
Brushed stainless steel
7332 29
Polished stainless steel
7334 29
Satin brass
Cable outlets
620
1
1
1
7330 19
7332 19
7334 19
1
1
1
7330 26
7332 26
7334 26
Conform to BS 5733
Fitted clamp and outlet membrane
With terminal block
20 A - 250 VA
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
45 A - 250 VA
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
SynergyTM Traditional
fused connection units
7330 32
7332 36
7334 37
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 32
7332 32
7334 32
1
1
1
7330 30
7332 30
7334 30
1
1
1
7330 31
7332 31
7334 31
1
1
1
7330 33
7332 33
7334 33
1
1
1
7330 36
7332 36
7334 36
1
1
1
7330 34
7332 34
7334 34
1
1
1
7330 35
7332 35
7334 35
1
1
1
7330 37
7332 37
7334 37
Fused connection units 13 A - 250 VA
Conform to BS 1363: Part. 4
Front cable outlet with cord grip
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 25 mm deep
Unswitched with cord outlet
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Unswitched without cord outlet
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Unswitched with red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Unswitched with red LED power indicator + cord
outlet
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switched with cord outlet
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switched without cord outlet
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switched with red LED power indicator
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
DP switched with red LED power indicator + cord
outlet
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
www.klinkmann.com
SynergyTM Traditional
blanking plates, cord outlets
<<< SYNERGY FLAT PLATES
A true flat
plate design:
elegant and
modern
NEW
7334 95
7332 52
Slim front plates:
BSS: Electro plated brushed stainless steel with clear epoxy satin lacquer
coating
PSS: Electro plated stainless steel with trivalent chrome for mirror finish
SB: Electro plated stainless steel with electrophoretic satin brass lacquer
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Pack
Cat.Nos
1
1
1
7330 95
7332 95
7334 95
1
1
1
7330 96
7332 96
7334 96
More finishes for setting wiring accessories
apart from the rest.
Blanking plates
1 gang
Nominal plate dimensions: 86 x 86 mm
Brushed stainless steel
Polished stainless steel
Satin brass
2 gang
Nominal plate dimensions: 86 x 146 mm
Brushed stainless steel
Polished stainless steel
Satin brass
Cord outlets
1
1
1
1 gang
Nominal plate dimensions: 86 x 86 mm
7330 52
Brushed stainless steel
7332 52
Polished stainless steel
7334 52
Satin brass
Black Nickel
Antique Copper
All the finishes are also available for Grid system:
- for association with Mosaic mechanisms
(See p. 568 to 585)
- for association with Grid modules (See p. 596 to 598)
These products are part of Legrand
international wiring accessories
offer > See p. 484-485
621
SynergyTM Flat plate
NEW
SynergyTM Flat plate
single pole switches
7343 32
7341 31
Cat.Nos
1
1
1
1
7341 31
7343 31
7345 31
7347 31
1
1
1
1
7341 32
7343 32
7345 32
7347 32
1
1
1
1
7341 33
7343 33
7345 33
7347 33
1
1
1
1
7341 34
7343 34
7345 34
7347 34
7345 33
7342 47
7340 46
Single pole plate switches 20 AX - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 35 mm deep
1 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
3 gang - 2-way switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
4 gang - 2-way switch
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
1
1
1
1
7340 46
7342 46
7344 46
7346 46
1
1
1
1
7340 47
7342 47
7344 47
7346 47
7340 07
7342 07
7344 07
7346 07
1
1
1
1
7340 09
7342 09
7344 09
7346 09
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 35 mm deep
1 gang - 2-way push switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Red catalogue numbers: New products
622
Push on/off rotary dimmers 400 W
250 VA - 50/60 Hz
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 35 mm deep
1 gang - 2 way
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang - 2 way
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Isolator switches 10 A - 250 VA
Single pole push switches 10 A - 250 VA
1
1
1
1
www.klinkmann.com
dimmers and isolator switches
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
NEW
Conform to BS EN 60947-3: 1992
Switch locking feature
For flush-mounting, back box to be min. 35 mm deep
White rocker
3-pole isolator switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
www.klinkmann.com
SynergyTM Flat plate
NEW
SynergyTM Flat plate
double pole switches
7344 10
7346 12
telephone and data sockets
7342 23
7344 57
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
1
1
1
1
7340 10
7342 10
7344 10
7346 10
1
1
1
1
7340 14
7342 14
7344 14
7346 14
1
1
1
1
7340 16
7342 16
7344 16
7346 16
1
1
1
1
7340 12
7342 12
7344 12
7346 12
Double pole switches 20 A - 250 VA
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 35 mm deep
Supplied with 1 gang frame (3 mm thick)
Cat.No 7341 98 in case of extra
wiring space needed
DP switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switch + cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switch + cord outlet + red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switch + red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Double pole switches 45 A - 250 VA
1
1
1
1
7340 22
7342 22
7344 22
7346 22
1
1
1
1
7340 23
7342 23
7344 23
7346 23
NEW
Conform to BS EN 60669-1
For flush-mounting, back box to be min. 47 mm deep
Red rocker
DP switch
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switch + red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
1
1
1
1
7340 50
7342 50
7344 50
7346 50
1
1
1
1
7340 51
7342 51
7344 51
7346 51
1
1
1
1
7340 54
7342 54
7344 54
7346 54
Telephone sockets
For flush-mounting, back box to be min. 35 mm deep
White rocker
UK master
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
UK secondary
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
RJ 11 / RJ 12 - single
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Data sockets Cat. 6
1
1
1
1
7340 56
7342 56
7344 56
7346 56
1
1
1
1
7340 57
7342 57
7344 57
7346 57
Rapid cable connection
For flush-mounting, back box to be min. 35 mm deep
RJ 45 - single
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
RJ 45 - twin
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Red catalogue numbers: New products
623
SynergyTM Flat plate
NEW
SynergyTM Flat plate
television sockets
7340 42
7346 40
Cat.Nos
1
1
1
1
7340 40
7342 40
7344 40
7346 40
1
1
1
1
7340 41
7342 41
7344 41
7346 41
1
1
1
1
7340 42
7342 42
7344 42
7346 42
1
1
1
1
7340 43
7342 43
7344 43
7346 43
7342 61
Television sockets
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
For flush-mounting, back box to be min. 35 mm deep
Screened
TV sockets - single male
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
SAT sockets - single "F" type
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
TV-R sockets
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
TV-R-SAT sockets - "F" type
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
7344 71
Cat.Nos
1
1
1
1
7340 65
7342 65
7344 65
7346 65
1
1
1
1
7340 75
7342 75
7344 75
7346 75
Socket outlets 13 A - 250 VA
Conform to BS EN 1363: Part. 2
Patented 3 pin safety shutters mechanism 2 earth
terminals
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang unswitched
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Double pole socket outlets 13 A - 250 VA
1
1
1
1
7340 60
7342 60
7344 60
7346 60
1
1
1
1
7340 61
7342 61
7344 61
7346 61
1
1
1
1
7340 70
7342 70
7344 70
7346 70
1
1
1
1
7340 71
7342 71
7344 71
7346 71
Red catalogue numbers: New products
624
www.klinkmann.com
British standard socket outlets
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
NEW
Conform to BS EN 1363: Part. 2
Patented 3 pin safety shutters mechanism 2 earth
terminals
For flush-mounting, back box to be min. 35 mm deep
1 gang switched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
1 gang switched with red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang switched
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang switched with red LED power indicator
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
www.klinkmann.com
SynergyTM Flat plate
NEW
SynergyTM Flat plate
British standard socket outlets
7346 89
7340 69
Euro-US standard socket outlets and shaver sockets
7342 59
7344 81
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
1
1
1
1
1
1
1
1
Cat.Nos
7340 88
7342 88
7344 88
7346 88
7340 89
7342 89
7344 89
7346 89
Socket outlets 15 A - 250 VA
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
1 gang switched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
7346 90
Cat.Nos
1
1
1
1
7340 80
7342 80
7344 80
7346 80
1
1
1
1
7340 81
7342 81
7344 81
7346 81
7340 68
7342 68
7344 68
7346 68
1
1
1
1
7340 69
7342 69
7344 69
7346 69
Conform to BS 546
Patented 3 pin safety shutters mechanism
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
1 gang switched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Euro-US socket outlets 10/16 A - 250 VA
For flush-mounting, back box to be min. 35 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Shaver sockets
Socket outlets 5 A - 250 VA
1
1
1
1
NEW
1
1
1
1
7340 90
7342 90
7344 90
7346 90
Conform to BS EN 61558-2-5 suitable for use with
European, British, American and Australian 2 pin
plugs
Rating: 20 VA
IP 24
Screwless live and neutral terminals
For flush-mounting, back box to be min. 45 mm deep
Supplied with 2 gang frame Cat.No 7341 99 (3 mm
thick) in case of extra wiring space needed
240 V / 120 V - 50/60 Hz
Nominal plate dimensions: 146 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Socket outlets 2 A - 250 VA
1
1
1
1
7340 59
7342 59
7344 59
7346 59
Conform to BS 546
For flush-mounting, back box to be min. 25 mm deep
1 gang unswitched
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Red catalogue numbers: New products
625
SynergyTM Flat plate
NEW
SynergyTM Flat plate
cooker control units and cable outlets
7340 29
7342 19
1
1
1
1
Cat.Nos
7340 29
7342 29
7344 29
7346 29
7340 30
Cooker control units - 250 VA
1
1
1
1
1
1
1
1
7340 19
7342 19
7344 19
7346 19
7340 26
7342 26
7344 26
7346 26
7342 31
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
Conform to BS 4177: 1992
For flush-mounting, back box to be min 47 mm deep
45 A DP switch + 13 A DP switched socket outlet
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Cable outlets
Conform to BS 5733
Fitted with clamp and outlet membrane
With terminal block
20 A - 250 VA
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
45 A - 250 VA
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
1
1
1
1
7340 32
7342 32
7344 32
7346 32
1
1
1
1
7340 30
7342 30
7344 30
7346 30
1
1
1
1
7340 31
7342 31
7344 31
7346 31
1
1
1
1
7340 33
7342 33
7344 33
7346 33
Red catalogue numbers: New products
626
www.klinkmann.com
fused connection units
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
NEW
Fused connection units 13 A - 250 VA
Conform to BS 1363: Part. 4
Front cable outlet with cord grip
Fuses supplied
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 35 mm deep
Supplied with 2 gang frame Cat. No 7341 99 (3 mm
thick) in case of extra wiring space needed
Unswitched - with cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Unswitched - without cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Unswitched - with red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Unswitched - with red LED power indicator + cord
outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
www.klinkmann.com
SynergyTM Flat plate
NEW
SynergyTM Flat plate
fused connection units (continued)
7344 35
blanking plates, cord outlets and accessories
7346 37
7344 95
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
1
1
1
1
7340 36
7342 36
7344 36
7346 36
1
1
1
1
7340 34
7342 34
7344 34
7346 34
1
1
1
1
7340 35
7342 35
7344 35
7346 35
1
1
1
1
7340 37
7342 37
7344 37
7346 37
NEW
Fused connection units 13 A - 250 VA
Conform to BS 1363: Part. 4
Front cable outlet with cord grip
Fuses supplied
Locked captive fuse carrier (padlockable)
For flush-mounting, back box to be min. 35 mm deep
Supplied with 2 gang frame Cat.No 7341 99 (3 mm
thick) in case of extra wiring space needed
DP switched - with cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switched - without cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switched - with red LED power indicator
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
DP switched - with red LED power indicator +
cord outlet
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
7346 52
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Compact mechanism for maximised wiring space
Supplied with transparent protection cover and 4 fixing screws (2 long
and 2 short screws)
Pack
Cat.Nos
1
1
1
1
7340 95
7342 95
7344 95
7346 95
1
1
1
1
7340 96
7342 96
7344 96
7346 96
Blanking plates
1 gang
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
2 gang
Nominal plate dimensions: 86 x 146 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Cord outlets
1
1
1
1
7340 52
7342 52
7344 52
7346 52
1 gang
Nominal plate dimensions: 86 x 86 mm
Antique Copper
Antique Brass
Black Nickel
Brushed stainless steel
Accessories
10
10
7341 98
7341 99
1
7302 58
1
7341 90
Side extension frames
3 mm thick frames to be used when extra wiring
space is needed
1 gang frame
2 gang frame
LED indicator
1 mA LED indicator
Screw extension kit
To be used when the installation depth of the flushmounting box is too big (i.e. walls with marble or
ceramic finish)
Kit comprising :
- 20 pre-assembled rods-short
- 2 threaded rods
Red catalogue numbers: New products
627
www.klinkmann.com
SynergyTM Metalclad
SynergyTM Metalclad
switches
7338 00
7338 03
British standard socket outlets
7338 21
Front plates: grey epoxy coated steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Supplied complete with close fit 43 mm deep surface-mounting back box
Pack
Cat.Nos
Single pole plate switches
10 AX - 250 V±
7338 65
Pack
5
5
5
5
5
7338 02
2 gang - 2-way
5
5
7338 03
3 gang - 2-way
Cat.Nos
Conform to BS 1363 - Part 2: 1995
Patented 3 pin safety shutters mechanism
2 earth terminals
Flush-mounting back box: min. 25 mm deep
7338 65
1 gang - unswitched
Nominal plate dimensions: 86 x 86 mm
7338 75
5
5
7338 70
7338 14
DP switch with cord outlet
5
7338 16
DP switch with cord outlet +
red LED power indicator
5
7338 61
5
7338 12
DP switch + red LED power indicator
5
7338 71
Double pole switches 45 A - 250 V±
628
5
5
7338 21
DP switch + red power indicator
2 gang - unswitched
Nominal plate dimensions: 86 x 146 mm
Conform to BS 1363 - Part 2: 1995
Patented 3 pin safety shutters mechanism
2 earth terminals
Flush-mounting back box: min. 25 mm deep
Switched
7338 60
1 gang
Nominal plate dimensions: 86 x 86 mm
5
Conform to BS EN 60669-1: 2000
Red rocker
Flush-mounting back box: min. 48 mm deep
Nominal plate dimensions: 146 x 86 mm
7338 20
DP switch
Socket outlets 13 A - 250 V±
Double pole socket outlets 13 A - 250 V±
Double pole switches 20 A - 250 V±
5
7338 89
Front plates: grey epoxy coated steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Supplied complete with close fit 43 mm deep surface-mounting back box
Conform to BS EN 60669-1: 2000
Flush-mounting back box: min. 16 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 00
1 gang - 1-way
7338 01
1 gang - 2-way
7338 05
1 gang - intermediate
Conform to BS EN 60669-1: 2000
Flush-mounting back box: min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 10
DP switch
7338 71
2 gang
Nominal plate dimensions: 86 x 146 mm
Switched with red LED power indicator
1 gang
Nominal plate dimensions: 86 x 86 mm
2 gang
Nominal plate dimensions: 86 x 146 mm
Socket outlets 15 A - 250 V±
5
Conform to BS 546: 1950
Patented 3 pin safety shutter mechanism
Flush-mounting back box: min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 88
1 gang - unswitched
5
7338 89
1 gang - switched
www.klinkmann.com
SynergyTM Metalclad
television, telephone, data sockets, blanking plates and cable
outlets
7338 40
7338 41
7338 57
Front plates: grey epoxy coated steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Supplied complete with close fit 43 mm deep surface-mounting back box
Pack
Cat.Nos
Television sockets
5
Flush-mounting back box: min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 40
Screened TV - single, male
1
7338 41
SynergyTM Metalclad
RCD sockets and fused connection units
Front plates: grey epoxy coated steel
Terminal screws captive and backed off ready for cabling - large angled
terminal entries
Supplied complete with close fit 43 mm deep surface-mounting back box
Pack
Screened satellite - single, "F" type
1
Telephone sockets
5
7338 37
7338 34
1
Cat.Nos
RCD sockets 13 A - 250 V±
Conform to BS 7288: 1990 and BS 1363 - Part 2: 1995
Maximum operating current 16 A
Incorporates a "test and reset" button
Flush-mounting back box: min. 25 mm deep
RCD unit 2 gang DP 30 mA
Nominal plate dimensions: 86 x 146 mm
Double pole switched
7338 97
Active
Electrical latching - trips on power failure
7338 98
Flush-mounting back box: min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 50
Single master
Passive
Mechanical latching - does NOT
trip on power failure
Fused connection units 13 A - 250 V±
5
7338 51
5
Conform to BS 1363 - Part 4: 1995
Fused 13 A (fuse supplied)
Fuse drawer retained by quarter turn catch, drawer
padlockable in open position for safety
Flush-mounting back box: min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
Double pole switched
7338 34
Without cord outlet
5
7338 35
With red LED power indicator
5
7338 36
With cord outlet
5
7338 37
With cord outlet + red LED power indicator
5
7338 30
5
7338 31
With red LED power indicator
5
7338 32
With cord outlet
5
7338 33
With cord outlet + red LED power indicator
Single secondary
Data sockets Cat. 6
1
1
Rapid cable connection
Flush-mounting back box: min. 35 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 56
RJ 45 - single
7338 57
RJ 45 - twin
Blanking plates
5
5
7338 95
7338 96
1 gang
Nominal plate dimensions: 86 x 86 mm
2 gang
Nominal plate dimensions: 86 x 146 mm
Cable outlet 20 A - 250 V±
5
Unswitched
Without cord outlet
Conforms to BS 5733: 1995
Flush-mounting back box: min. 25 mm deep
Nominal plate dimensions: 86 x 86 mm
7338 19
20 A - with terminal block and outlet gland
629