TECNORD
ELECTRONIC PRODUCTS
a Delta Power Company
JLP-L2S
Fingertip Proportional Control Lever
FEATURES
OVERALL DIMENSIONS
• Single axis / bi-directiional, panel mounting style.
• 3 & 4-pins potentiometer con guration.
• Bi-directional switches.
MECHANICAL SPECIFICATIONS
•
•
•
•
•
•
Lever de ection angle:
Electrical angle:
Operating temperature range:
Protection class:
Life:
Fixing screws included:
±32° ±1°
±30° ±1°
-25°C / +85°C
IP 65 (above panel)
3 million cycles
2 - M4x16
Mod. D Dubox
Mod. G Molex
ELECTRICAL SPECIFICATIONS
Potentiometer
• Electrical power rating:
• Ohmic resistance: / A = 50% of Vin
/ Q = 80% of Vin
/ R = 100% of Vin
• Max. operating input voltage (Vin):
• Min. load impedance on pin 5 (signal):
• Max. operating current on pin 5:
• Output voltage:
• Linearity (resistive track):
0.25 W @ 25°C
8 kȍ ±20%
5 kȍ ±20%
4 kȍ ±20%
48 V or ±24 V
50 kȍ
1 mA
see graph
2% or better
Directional switches
• Typical track resistance:
• Max. operating input voltage:
• Min. load impedance on pins 2&3:
• Max. operating current on pins 2&3:
• Directional switches threashold angle:
• Connector type: Mod. D Dubox
Mod. G Molex
150 Ohm
48 V or ±24 V
50 kȍ
1 mA
±4°
P.N. 76382.407 wiring
C-Grid P.N. 50-57-9407
PANEL CUT-OUT
OUTPUT SIGNAL CONTROL CHARACTERISTIC
3-pins con guration
wiring
POTENTIOMETER & SWITCHES OPTIONS
Output signal
3-4 pins pot & bi-dir. switch
Reference codes
S = 80% Vin S = 100% Vin S = 50% Vin
Q
R
C
ELECTRICAL CONNECTIONS
4-pins con guration
wiring
>> ORDERING INFORMATION: see page 766
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628
Fax: (815) 397-2526
Page 771
E-mail: delta@delta-power.com
TECNORD
ELECTRONIC PRODUCTS
a Delta Power Company
JLP-L2S Twin Channel
Fingertip Proportional Control Lever
FEATURES
OVERALL DIMENSIONS
• Single axis / bi-directiional, panel mounting style.
• Twin channel potentiometer joystick.
• Redundancy on the 100% of the stroke.
MECHANICAL SPECIFICATIONS
•
•
•
•
•
•
Lever de ection angle:
Electrical angle:
Operating temperature range:
Protection class:
Life:
Fixing screws included:
±32° ±1°
±30° ±1°
-25°C / +85°C
IP 65 (above panel)
3 million cycles
2 - M4x16
black sheat
Yellow: output wiper 1
White: supply voltage (Vcc)
Black: 0 V (GND)
Brown: output wiper 2
ELECTRICAL SPECIFICATIONS
Potentiometer
• Electrical power rating:
• Total resistance between pin 1 and 3:
• Nominal voltage supply (Vin):
• Tolerance between track 1 and 2:
• Output voltage:
• Load resistance:
• Linearity (resistive track):
4 Pin Amp J.
Connector 929505-1
0.25 W @ 25°C
2 kȍ ±20%
10 V
± 4% of Vcc
see graph
100 kȍ - nominal
50 kȍ - minimum
2% or better
PANEL CUT-OUT
POTENTIOMETER & SWITCHES OPTIONS
Output signal
3 pins potentiometer
Reference codes
S = 60% Vin
V
• Connector type:
AMP JPT P.N. 929505-1
ELECTRICAL CONNECTIONS
OUTPUT SIGNAL CONTROL CHARACTERISTIC
(pinout)
4: Brown: output wiper 2
1: White: supply voltage (Vcc)
3: Black: 0 V (GND)
2: Yellow: output wiper 1
>> ORDERING INFORMATION: see page 766
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628
Fax: (815) 397-2526
Page 772
E-mail: delta@delta-power.com