INTRODUCTION
ABOUT PRECISION-PARAGON [P2]
STRATEGIC PARTNERS
PRODUCT UPDATES
Precision-Paragon [P2] understands the needs
of lighting contractors and end-users,
believes that significant cost savings and
environmental benefits go hand in hand and
has earned their success through a reputation
for remarkable service.
Energy-efficient lighting technology is under
constant development, and as a result product
specifications can change frequently. Our
latest and most up-to-date product
specifications are always available on
www.P-2.com.
Today [P2] customers benefit from the shared
experience, capacity and skill of the team.
With facilities across the country and strategic
partnerships throughout the industry, [P2]
offers an exceptional level of innovation,
quality and service.
INDUSTRIAL
QHC
36
LVT
37
INDOOR
SIL
38
OUTDOOR
QCF
39
TMF
40
SPECIALTY
RLL
41
VTL
42
VPL
43
SNL
44
TMD
45
CONVERSION KITS
TKC
46
CKL
47
VTK
48
VPK
49
TKL
50
TKG
51
WWW.P-2.COM
QHC
Modular Chassis LED High-Bay
FEATURES
• Long-life LEDs at L95 (95% lumen
maintenance) at 60,000 hours reduce
life cycle maintenance costs.
• Choice of four lumen packages
and dimming option available.
• Rigid durable housing & solid state light
engine are resistant to vibration.
• Up to 114 lumens per watt.
• Simple three step installation: hang gripple,
snap gripple hook hangers to fixture &
plug-in/wire fixture.
INDUSTRIAL
• Single 135W fixture directly replaces a
400W HID and equivalent systems.
• Modular design allows multiple
chassis configurations for higher
wattage applications.
• Ideal one-for-one replacement of
conventional HID high-bay systems.
• IP66 applications standard, with
sensor fixture is IP65 rated.
• Provides controlled uniform light distribution
with acrylic optics without color shift.
• Aisle optics deliver superior
vertical illumination.
ORDERING INFORMATION
–
MODEL
QHC LED
High-Bay
VOLTAGE
UL 120-277 VAC
347 347 VAC1
480 480 VAC
EXAMPLE: QHC-UL-60C-700-51K-AAO-10GYSH
–
–
–
QTY OF
LED CHIPS
36C 36 Chip Board1
48C 48 Chip Board1
60C 60 Chip Board2
120C 120 Chip Board3
180C 180 Chip Board3
DRIVER
CURRENT
700 700mA
COLOR
TEMP
51K 5100
–
–
OPTICS
AAO Asymmetrical
Aisle Optics
OAO Open Area
Optics
LBO Low-Bay
Optics
NAO Narrow Aisle
Optics1
FOOTNOTES
1
Non DLC with AAO & NAO optics.
2
Non DLC with NAO optics.
3
Non DLC.
4
HBA only. IP65 rated.
5
Sensor programming module sold separately, FSIR-100.
6
Contact factory for additional cord & mounting options.
–
–
OCC
SENSOR
CORD
PLUG6
WH Wet Location
High-Bay Sensor4
WL Wet Location
Low-Bay Sensor4
DH-WH Digital Dimming,
Wet Location
High-Bay Sensor, WS5
DH-WL Digital Dimming,
Wet Location
Low-Bay Sensor, WS5
DB-WH Digital Bi-Level,
Wet Location
High-Bay Sensor, HBA
DB-WL Digital Bi-Level,
Wet Location
Low-Bay Sensor, HBA
C8 8' Cord,
No Plug
C8/ 8' Cord
L715 & Plug
(L7-15P)
C8/515 8' Cord
& Plug
(515P)
PQC15 15' Cord/
Quick
Connect
OTHER
10GYSH 10' Gripple
Y Snap-Hook
Hangers
QTB QHC Top Box
for Power
Connectors
JP Job Pack
FIXTURE DIMENSIONS
18.24
12.63
9.45
3.00
5.11
7.03
*Drawings N.T.S.
CERTIFICATION
36
IP65
IP65
CERTIFIED
CERTIFIED
IP65
CERTIFIED
LVT
LED 2x4 High-Bay Vaportight
FEATURES
• Instant re-start with no warm-up times or
reduced light output in cold environments.
• Economical mounting options can provide
dramatic savings on the installation labor.
• Mounting options for v-hook, cable
& ceiling mount systems.
• Choice of four lumen packages and
three dimming options available.
• Long-life LEDs at L80 (80% lumen maint.) at
60,000 hours reduce life cycle maintenance costs.
• Up to 110 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA & Buy
American requirements.
INDUSTRIAL
• Hose down & wet location fixture is IP66
rated (Sensored units are IP65 rated).
• Poured in place gasket & stainless latches seal
the enclosure from most hostile environments.
• Frosted diffuser for uniform light
distribution without pixilation.
• Very tough diffuser resists breakage and
reduces replacement and maintenance costs.
• Suitable for food production areas.
• LED light engine eliminates risk of glass
breakage in food production areas.
• Rounded fixture shape makes for easy cleaning
and prevents dirt and water accumulation.
ORDERING INFORMATION
–
MODEL
LVT LVT 2X4 LED
High-Bay
Vaportight
EXAMPLE: LVT-2X4-HL-F-UL-40K
–
–
LUMEN
OUTPUT
XL Extra Low
LW Low
ML Medium
SIZE
HL High
–
DRIVER
OUTPUT
–
–
COLOR
TEMP
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
30K
35K
40K
50K
3000
3500
4000
5000
DRIVER
VOLTAGE
2X4 2X4 Nominal
UL Universal
120-277 VAC
FOOTNOTES
1
Must be used in conjunction with lighting controls.
2
Bi-Level driver must be controlled by sensor or A/B switching.
3
Sensor programming module sold separately, FSIR-100.
4
Contact factory for additional cord & mounting options.
5
Available for XL and ML, contact factory for other lumen outputs.
–
–
OCC
SENSOR
WH Wet Location
High-Bay Sensor
WL Wet Location
Low-Bay Sensor
DH-WH Digital Dimming, Wet
Location High-Bay
Sensor, WS3
DH-WL Digital Dimming, Wet
Location Low-Bay
Sensor, WS3
CORD
PLUG4
C8 8' Cord,
No Plug
C8/ 8' Cord
L715 & Plug
(L7-15P)
C8/515 8' Cord
& Plug
(515P)
OTHER
VSM Surface
Mounting
Bracket Set
EB Emergency
Battery
Backup5
JP Job Pack
ACCESSORIES
(ORDER SEPARATELY)
Zinc Tamper
Part #95000644
Resistant Screws (12 Required)
FIXTURE DIMENSIONS
*Drawings N.T.S.
CERTIFICATION
IP65
IP66
IP65
IP66
CERTIFIED
CERTIFIED
CERTIFIED
CERTIFIED
LED Product Partner
IP66
IP65
CERTIFIED
CERTIFIED
37
SIL
Standard LED Strip
FEATURES
INDOOR
• Replace outdated, non-efficient
strip lighting with low wattage,
high lumen solutions.
• Upgrade to modern aesthetics
providing controlled soft, uniform
light distribution without pixilation.
• Compact size with excellent light
distribution fits multiple applications.
• Choice of four lumen packages
and dimming option available.
• Long-life LEDs at L80 (80% lumen
maintenance) at 60,000 hours reduce
life cycle maintenance costs.
• Instant re-start with no warm-up times or
reduced light output in cold environments.
• Optional emergency battery
backup for safety lighting.
• Mounting: wall, ceiling and suspended.
• Available in 4' and 8' lengths.
• Up to 106 lumens per watt.
• Color Rendering Index (CRI) > 80
• Made In USA. Meets ARRA &
Buy American requirements.
ORDERING INFORMATION
–
MODEL
SIL Standard
LED Strip
EXAMPLE: SIL-1X4-ML-F-UL-40K
–
LUMEN
OUTPUT
XL Extra Low
LW Low
SIZE
1X4 1X4 Nominal
1X8 1X8 Nominal
(Non DLC 35K)
–
–
ML Medium
HL High
–
DRIVER
OUTPUT
–
COLOR
TEMP
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
OCC
SENSOR
35K 3500
SH PIR High-Bay Sensor3
40K 4000
SL PIR Low-Bay Sensor3
50K 5000
DH-SH Digital Dimming
High-Bay Sensor, WS4
DRIVER
VOLTAGE
DH-SL Digital Dimming
Low-Bay Sensor, WS4
UL Universal
120/277 VAC
DB-SH Digital Bi-Level
High-Bay Sensor, HBA
FOOTNOTES
1
Must be used in conjunction with lighting controls.
2
Bi-Level driver must be controlled by sensor or A/B switching.
3
HBA is std. For Wattstopper, specify SH-WS or SL-WS, IP65 rated.
4
Sensor programming module sold separately, FSIR 100.
5
Contact factory for additional cord & mounting options.
6
Available for XL, LW, and HL.
–
–
DB-SL Digital Bi-Level
Low-Bay Sensor, HBA
CORD
PLUG5
C8 8' Cord,
No Plug
C8/ 8' Cord
L715 & Plug
(L7-15P)
C8/515 8' Cord
& Plug
(515P)
PQC15 15' Cord/
Quick
Connect
OTHER
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup6
JP Job Pack
FIXTURE DIMENSIONS
48.060"
4.310"
3.995"
*Drawings N.T.S.
CERTIFICATION
38
QCF
LED Gas Canopy Fixture
FEATURES
• Long-life LEDs at L95 (95% lumen
maintenance) at 60,000 hours reduce
life cycle maintenance costs.
• Choice of four lumen packages and
dimming option available.
• Configurative acrylic optics designed to
illuminate both area and fuel pumps.
• Up to 108 lumens per watt.
• Suitable for dry, damp and wet
location applications, IP65 rated.
OUTDOOR
• Upgrade to modern architectural aesthetics
providing controlled uniform light distribution.
• Improves facial recognition
for enhanced security.
• Energy-efficient dark sky compliant
canopy solution without color shift.
• Cast aluminum housing with gasket
seals the fixture for IP65 rating.
• Recessed and surface mount options available.
• Quick driver access for easy maintenance.
• Designed to fit into existing 4 inch
round opening in canopy.
ORDERING INFORMATION
EXAMPLE: QCF-UL-60C-F-51K-GCO
–
–
MODEL
VOLTAGE
QCF LED
Gas Canopy
Fixture
UL 120-277 VAC
347 347 VAC
480 480 VAC
–
–
QTY OF LED
CHIPS
DRIVER
OUTPUT
24C 24 Chip
Board
36C 36 Chip
Board
48C 48 Chip
Board
60C 60 Chip
Board
F Fixed
DM 0-10v
Dimming1
–
COLOR TEMP
51K 5100
–
OPTICS
GCO Gas Canopy
Optic
WAO Wide Area
Optics
(Non DLC)
WQO Wide Square
Optics
(Non DLC)
OAO Open Area
Optics
(Non DLC)
–
MOUNTING OPTIONS
SDC
DDC
SMB
QCK-1
Single Deck Canopy
Double Deck Canopy
Surface Mount Box
Whiteway Riviera 2, Whiteway
Vision, Cooper CLS, Whiteway
LeSabre 3
QCK-2 LSI/Master Dakota, Jet Philips
Houstonian (Old Style),
Whiteway Riviera
QCK-3 Jet-Philips Houstonian
(SHO/RHO), Guardian MC-1411
QCK-4 LSI Richmond
QCK-5 Whiteway Civic
12.29
FOOTNOTES
1
Must be used in conjunction with lighting controls. Contact factory for assistance.
8.27
4.42
1.19
FIXTURE DIMENSIONS
15.75
9.70
12.29
9.70 15.75
8.27
4.42
1.19
15.75
9.70
*Drawings N.T.S.
CERTIFICATION
IP65
IP65
CERTIFIED
CERTIFIED
IP65
CERTIFIED
9.70 15.75
39
TMF
Low Wattage LED Flood
FEATURES
OUTDOOR
• Higher quality lighting over the
incandescent, HID or HPS fixtures
traditionally used in flood applications.
• Up to 97% less electricity, compared to
traditional fixtures the TMF saves energy
while providing similar light levels.
• Wet location fixture is IP65 & IP66 rated.
• Tempered glass lens resists
breakage and reduces replacement
and maintenance costs.
• Instant re-start, no warm-up times or
reduced light output in cold environments.
ORDERING INFORMATION
• Die cast aluminum body designed
for maximum heat dissipation.
• Steel mounting hardware.
• L70 (70% lumen maintenance) at 50,000
hours reduces life cycle maintenance costs.
• Up to 72 lumens per watt.
• Color Rendering Index (CRI) > 70.
EXAMPLE: TMF-21W-DSP-TG-50K-18C-UL-350-YC-BB
–
–
MODEL
–
OPTICS
SP 12° Spot
(Standard)
DSP 32° Diffused
Flood
TMF Low
Wattage
LED Flood
INPUT
WATTS
SECONDARY OPTICS
14W 14 Watt
(12 Chip, 350mA)
16W 16 Watt
(6 Chip, 700mA)
21W 21 Watt
(18 Chip, 350mA)
21W 21 Watt
(12 Chip, 520mA)
TG Clear Tempered
Glass Lens (STD)
CP Clear
Polycarbonate Lens
–
–
–
–
COLOR
TEMP
DRIVER
VOLTAGE
50K 5000
UL 120-277 VAC
QTY OF
LED CHIPS
DRIVER
CURRENT
6C 6 Chip
Board
12C 12 Chip
Board
18C 18 Chip
Board
350 350 mA
Across Chip
520 520 mA
Across Chip1
700 700 mA
Across Chip2
–
–
–
MOUNTING
FIXTURE
FINISH
YM Yoke Mount Only
w/18" Cord
YC Yoke Mount
w/ WCA
Cover Plate
Assembly
BB
BW
BZ
RAL
Black
White
Bronze
RALxxxx (RAL
Specification)
OTHER
ACCESSORIES*
AJ
BX
WCA
GS
Architectural Junction Box
Brass In-Grade Junction Box
2 Piece Wall/Ceiling Adaptor
Ground Stake
PA Cast Post Top Adaptor
TS Tree Strap
FOOTNOTES
1
Available only with 21W 12C.
2
Available only with 16W 6C.
*Ordered Separately.
34NA 3/4" Watertight NPT Adaptor
FIXTURE DIMENSIONS
5 9/16"
6 1/4"
4 13/16"
5 9/16"
Front
Side
Top
IP66
IP65
IP66
CERTIFIED
CERTIFIED
CERTIFIED
CERTIFIED
5 11/16"
5 11/16"
1 1/2"
7 5/16"
6"
1/4"
40
IP66
IP65
CERTIFIED
CERTIFIED
3 5/8"
IP65
2 3/4"
CERTIFICATION
*Drawings N.T.S.
RLL
LED Stairwell Radius Wrap
FEATURES
• Choice of two lumen packages and
dimming option available.
• Long-life, LEDs at L75 (75% lumen
maintenance) at 60,000 hours reduce
life cycle maintenance costs.
• Instant re-start with no warm-up
time or reduced output in cold
or vacant environments.
• Mounting: wall, ceiling and suspended.
• Up to 104 lumens per watt.
• Color Rendering Index (CRI) > 80
• Made In USA. Meets ARRA & Buy
American requirements.
S P E C I A LT Y
• Upgrade to modern aesthetics
providing controlled soft, uniform light
distribution without pixilation.
• Occupancy controlled dimming of the LEDs
increases energy savings while maintaining
base light levels in stairwells at all times.
• Ideal for areas where maximum light levels
are not needed when area is unoccupied.
• Bi-level light control offers safety and security.
• Sensor features a daylight sensor which can be
used to increase energy savings by turning off
lights when sufficient natural light is detected.
• Compact size with excellent light distribution.
ORDERING INFORMATION
–
EXAMPLE: RLL-1X4-XL-BL-UL-40K-SL
–
MODEL
RLL LED
Stairwell
Radius Wrap
SIZE
1X2 1x2 Nominal
1X4 1x4 Nominal
1X8 1x8 Nominal
(Non DLC)
–
–
LUMEN
OUTPUT
DRIVER
OUTPUT
VL Very Low
(1x2 Only)
XXL Extra
Extra Low
(1x2 Only)
XL Extra Low
(Non DLC 1x2)
LW Low
(Non DLC 1x2)
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
–
–
COLOR
TEMP
OCC
SENSOR
35K 3500
SH PIR High-Bay Sensor3
40K 4000
SL PIR Low-Bay Sensor3
US Ultrasonic Sensor
(Fixed Output Only)
DH-SH Digital Dimming
High-Bay Sensor, WS4
50K 5000
DRIVER
VOLTAGE
DH-SL Digital Dimming
Low-Bay Sensor, WS4
UL Universal
120/277 VAC
DB-SH Digital Bi-Level
High-Bay Sensor, HBA
FOOTNOTES
1
Must be used in conjunction with lighting controls.
2
Bi-Level driver must be controlled by sensor or A/B switching.
3
HBA is std. For Wattstopper, specify SH-WS or SL-WS, IP65 rated.
4
Sensor programming module sold separately, FSIR-100.
5
Contact factory for additional cord & mounting options.
6
Not available on 1x2 with US sensor option.
–
–
CORD
PLUG5
OTHER
C8 8' Cord,
No Plug
C8/ 8' Cord
L715 & Plug
(L7-15P)
PQC15 15' Cord/
Quick
Connect
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup6
JP Job Pack
DB-SL Digital Bi-Level
Low-Bay Sensor, HBA
FIXTURE DIMENSIONS
1X2 SIDE VIEW WITH SENSOR
1X2 CROSS SECTION
30.00"
6.00"
4.01"
4.94"
1X4 SIDE VIEW WITH SENSOR
1X4 CROSS SECTION
54.07"
6.00"
4.01"
4.94"
1X8 WITHOUT SENSOR = 96" LONG
1X8 WITH SENSOR IN CENTER OF FIXTURE = 102" LONG
*Drawings N.T.S.
CERTIFICATION
41
VTL
LED Vaportight
FEATURES
S P E C I A LT Y
• Hose down & wet location fixture is IP66
rated (Sensored units are IP65 rated).
• Poured in place gasket seals the enclosure
from most hostile environments.
• Frosted diffuser for uniform light
distribution without pixilation.
• Very tough diffuser resists breakage and
reduces replacement and maintenance costs.
• Suitable for food production areas.
• LED light engine eliminates risk of glass
breakage in food production areas.
• Instant re-start with no warm-up times or
reduced light output in cold environments.
• Economical mounting options can provide
dramatic savings on the installation labor.
• Stainless steel mounting hardware options
for cable & ceiling mount systems.
• Choice of four lumen packages and
three dimming options available.
• Long-life LEDs at L80 (80% lumen maintenance) at
60,000 hours reduce life cycle maintenance costs.
• Available in 2', 4' and 8' lengths.
• Up to 103 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA & Buy
American requirements.
ORDERING INFORMATION
–
MODEL
VTL VTL LED
Vaportight
EXAMPLE: VTL-1X4-ML-DM-UL-40K
–
–
LUMEN
OUTPUT
XL Extra Low
LW Low
SIZE
1X2 1X2 Nominal
(Non DLC)
1X4 1X4 Nominal
1X8 1X8 Nominal
ML Medium
HL High
–
–
DRIVER
OUTPUT
–
COLOR
TEMP
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
30K
35K
40K
50K
OCC
SENSOR
WH Wet Location
High-Bay Sensor
3000
3500
4000
5000
WL Wet Location
Low-Bay Sensor
DH-WH Digital Dimming, Wet
Location High-Bay
Sensor, WS3
DH-WL Digital Dimming, Wet
Location Low-Bay
Sensor, WS3
DRIVER
VOLTAGE
UL Universal
120/277
VAC
–
–
FOOTNOTES
1
Must be used in conjunction with lighting controls.
2
Bi-Level driver must be controlled by digital sensor.
3
Sensor programming module sold separately, FSIR-100.
4
Contact factory for additional cord & mounting options.
5
Available for XL, LW, and HL (1x4 and 1x8 only).
CORD
PLUG4
C8 8' Cord,
No Plug
C8/L715 8' Cord
& Plug
(L7-15P)
C8/515 8' Cord
& Plug
(515P)
OTHER
VAB VTL 45°
Angled
Bracket
SSL Stainless
Steel
Latches
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup5
JP Job Pack
ACCESSORIES (ORDER SEPARATELY)
Zinc Tamper Plastic Latches Order Part:
Resistant #95000644 (8 or 14 Required)
Stainless Steel Latches Order Part:
Screws
#95011561 (8 or 14 Required)
FIXTURE DIMENSIONS
1X2 SIDE VIEW
.85"
27.69"
CROSS SECTION ALL
3.82" Flat
4.21"
6.77"
1X4 SIDE VIEW
7.41"
51.81"
4.21"
1X8 SIDE VIEW
99.52"
4.21"
*Drawings N.T.S.
CERTIFICATION
IP65
IP66
IP65
IP66
CERTIFIED
CERTIFIED
CERTIFIED
CERTIFIED
LED Product Partner
42
IP66
IP65
CERTIFIED
CERTIFIED
VPL
LED Parking Garage Vaportight
FEATURES
reduced light output in cold environments.
• Economical mounting options can provide
dramatic savings on the installation labor.
• Stainless steel mounting hardware options
for cable & ceiling mount systems.
• Choice of three lumen packages and
three dimming options available.
• Long-life LEDs at L80 (80% lumen maintenance) at
60,000 hours reduce life cycle maintenance costs.
• Available in 2’, 4’ and 8’ lengths.
• Up to 106 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA & Buy
American requirements.
S P E C I A LT Y
• Replaces maintenance & energy
intensive HID & HPS fixtures.
• Wide distribution works well in low
mounting height applications.
• Hose down & wet location fixture is IP66
rated (Sensored units are IP65 rated).
• Poured in place gasket seals the enclosure
from most hostile environments.
• Frosted deep diffuser ensures visual comfort for drivers.
• Very tough diffuser resists breakage and reduces
replacement and maintenance costs.
• LED light engine eliminates risk of glass
breakage in parking garages.
• Instant re-start with no warm-up times or
EXAMPLE: VPL-1X4-LW-F-UL-40K
ORDERING INFORMATION
–
MODEL
VPL LED
Parking
Garage
Vaportight
SIZE
–
–
LUMEN
OUTPUT
XL Extra Low
LW Low
HL High
(Non DLC
1x2)
1X2 1x2 Nominal
1X4 1x4 Nominal
1X8 1x8 Nominal
–
–
DRIVER
OUTPUT
–
COLOR
TEMP
F Fixed
30K 3000
DM 0-10v
Dimming1
BL Bi-Level2
35K 3500
40K 4000
50K 5000
DRIVER
VOLTAGE
UL Universal
120/277 VAC
–
–
OCC
SENSOR
CORD
PLUG4
WH Wet Location
High-Bay Sensor
WL Wet Location
Low-Bay Sensor
DH-WH Digital Dimming,
Wet Location
High-Bay Sensor, WS3
DH-WL Digital Dimming,
Wet Location
Low-Bay Sensor, WS3
FOOTNOTES
C8 8' Cord,
No Plug
C8/ 8' Cord
L715 & Plug
(L7-15P)
C8/515 8' Cord
& Plug
(515P)
OTHER
SSL Stainless
Steel
Latches
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup5
JP Job Pack
1
ACCESSORIES (ORDER SEPARATELY)
2
Zinc Tamper Plastic Latches Order Part:
Resistant #95000644 (8 or 14 Required)
Stainless Steel Latches Order Part:
Screws
Must be used in conjunction with lighting controls.
Bi-Level driver must be controlled by digital sensor.
3
Sensor programming module sold separately, FSIR-100.
4
Contact factory for additional cord & mounting options.
5
Not available with 1x2.
#95011561 (8 or 14 Required)
FIXTURE DIMENSIONS
1X2 SIDE VIEW
CROSS SECTION ALL
.85"
27.70"
3.82" FLAT
5.63"
1X4 SIDE VIEW
1X8 LENGTH = 99.52" (Not Shown)
6.77"
7.41"
51.81"
5.63"
*Drawings N.T.S.
CERTIFICATION
99.52"
5.63"
IP65
IP66
IP65
IP66
CERTIFIED
CERTIFIED
CERTIFIED
CERTIFIED
LED Product Partner
IP66
IP65
CERTIFIED
CERTIFIED
43
SNL
LED Sanitube Food Service Strip
FEATURES
S P E C I A LT Y
• Low wattage LED Sanitube ideal for
many food processing applications.
• Internal optical diffuser used for
controlled, soft, uniform light
distribution without pixilation.
• Tested to National Sanitation
Foundation (NSF) for splash zone
rating; IP65 & IP66 rated.
• Heavy duty one-piece non-metallic
housing with gasketed ends caps
& corrosion resistant stainless steel
hardware prevents water entry & rust.
• Long-life LEDs at L80 (80% lumen
maintenance) at 60,000 hours reduce
life cycle maintenance costs.
• Mounting: wall, ceiling or suspended.
• Available in 4’ and 8’ lengths.
• Up to 100 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA &
Buy American requirements.
ORDERING INFORMATION
–
EXAMPLE: SNL-1X8-ML-F-UL-40K-CWH6
–
MODEL
SIZE
SNL LED
Sanitube
Food Service
Strip
1X4 1x4
Nominal
1X8 1x8
Nominal
(Non DLC)
–
LUMEN
OUTPUT
XL Extra Low
LW Low
ML Medium
HL High
–
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
–
DRIVER
VOLTAGE
UL Universal
120-277 VAC
–
COLOR
TEMP
40K 4000
50K 5000
–
CORD PLUG
CWH6 6’ Watertight
Cord, No Plug
CWH12 12’ Watertight
Cord, No Plug
OTHER
LSP Lighting
Surge
Protector
JP Job Pack
CWH25 25’ Watertight
Cord, No Plug
FOOTNOTES
1
Must be used in conjunction with lighting controls.
Bi-Level driver must be controlled by sensor or A/B switching.
2
FIXTURE DIMENSIONS
CROSS SECTION
5.750"
PLAN VIEW
98.000"
6.032"
*Drawings N.T.S.
CERTIFICATION
44
IP65
IP66
CERTIFIED
CERTIFIED
TMD
LED Loading Dock Light
FEATURES
• Instant re-start, no warm-up times or
reduced light output in cold environments.
• Die cast aluminum body designed
for maximum heat dissipation.
• Stainless steel mounting hardware.
• L70 (70% lumen maintenance) at 50,000
hours reduces life cycle maintenance costs.
• Up to 72 lumens per watt.
• Color Rendering Index (CRI) > 70.
S P E C I A LT Y
• Up to 97% less electricity, compared to
traditional fixtures the TMD saves energy
while providing similar light levels.
• Wet location fixture is IP65 & IP66 rated.
• Higher quality lighting over the
incandescent, quartz or metal
halide fixtures traditionally used
in loading dock applications.
• Tempered glass lens resists breakage and
reduces replacement and maintenance costs.
ORDERING INFORMATION
EXAMPLE: TMD-14W-SP-50K-12C-UL-350-C6
–
MODEL
TMD LED
Loading
Dock Light
–
INPUT
WATTS
–
–
OPTICS
14W 14 Watt
(12 Chip,
350mA)
16W 16 Watt
(6 Chip,
700mA)
21W 21 Watt
(18 Chip,
350mA)
21W 21 Watt
(12 Chip,
520mA)
SP 12° Spot
(Standard)
DSP 32°
Diffused
Flood
–
DRIVER
CURRENT
6C 6 Chip Board
350 350 mA
Across Chip
520 520 mA
Across Chip1
700 700 mA
Across Chip2
18C 18 Chip Board
COLOR TEMP
–
QTY OF
LED CHIPS
12C 12 Chip Board
DRIVER
VOLTAGE
50K 5000
–
UL 120-277 VAC
347 347 VAC
480 480 VAC
–
CORD PLUG
OTHER
C6 6' Cord, No Plug
C6/515 6' Cord & 120v
Convenience
Plug
(NEMA 5-15P)
C3/C14 3' Cord & 120v
Dedicated Dock
Arm Plug
(IEC C-14P)
IRS In-Line Rocker
Switch3
CP Clear
Polycarbonate
Lens
FOOTNOTES
1
Available only with 21W 12C.
2
Available only with 16W 6C.
3
Available for 120 Volt and plug options only.
FIXTURE DIMENSIONS
Ø .875
4.8125
5.5625
6.25
5.3125
*Drawings N.T.S.
CERTIFICATION
IP65
IP66
IP65
IP66
CERTIFIED
CERTIFIED
CERTIFIED
CERTIFIED
IP66
IP65
CERTIFIED
CERTIFIED
45
TKC
LED Troffer Conversion Kit
FEATURES
• Four LED color choices
CONVERSION KIT
• Contemporary style LED retrofit for
existing 2x2 and 2x4 prismatic or parabolic
troffers with depth greater than 3-1/8”
• Multiple lumen packages
• Fully integrated hinged door assembly allows
for easy installation and rapid troffer conversion
• Reduces job site waste by reusing
existing fixture housing
• 60,000 hour LEDs at L80 (up to 150,000
projected life) for reduced maintenance
• Integral battery pack optional on most models
• Five year warranty (Terms and Conditions apply)
• High efficiency acrylic center lens features linear
prisms for high performance without pixilation
• High performance reflector with
matte white paint standard
ORDERING INFORMATION
TKC
MODEL
TKC LED Troffer
Conversion
Kit
–
SIZE
22 2' × 2'
24 2' × 4'
–
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
U
–
LUMEN OUTPUT
VW Very Low Watt1
MW Medium Low Watt
LW Low Watt
ML Medium Lumen
HL High Lumen
VL Very High Lumen2
DRIVER
E Fixed Output
ESD Step Dimming
–
VOLTAGE
U 120V- 277V
ED 0-10V Dimming
OPTIONS
ELL14 Emergency Battery
Pack Installed, 1400
Lumens
LSP Lightening Surge
Protetor
FOOTNOTES
1
2
2x4 Only.
2x2 Only.
FIXTURE DIMENSIONS
2x4 Minimum Dimensions
143⁄8
2x2 Minimum Dimensions
143⁄8
.
31⁄4
5⁄8
221⁄2
Minimum Dimension
at Fixture Opening
4513⁄16
Minimum Inside Dimension
4613⁄16
Minimum Inside Dimension
at Fixture Opening
48
31⁄4
5⁄8
221⁄2
Minimum Dimension
at Fixture Opening
2213⁄16
Minimum Inside Dimension
at Fixture Opening
24
*Drawings N.T.S.
CERTIFICATION
46
CKL
Standard Strip LED Conversion Kit
FEATURES
• Long-life LEDs at L80 (80% lumen maintenance) at
60,000 hours reduce life cycle maintenance costs.
• Instant re-start, no warm-up times or reduced
light output in cold environments.
• Optional emergency battery
backup for safety lighting.
• Available in 4' and 8' lengths.
• Up to 103 lumens per watt.
• Color Rendering Index (CRI) > 80
• Made In USA. Meets ARRA & Buy
American requirements.
CONVERSION KIT
• Replace outdated, non-efficient strip lighting
with low wattage, high lumen solutions.
• Labor saving pre-wired assembly,
ready for immediate installation.
• Upgrade to modern aesthetics providing controlled
soft, uniform light distribution without pixilation.
• Compact size with excellent light
distribution fits standard 4.25" strips.
• Choice of four lumen packages and
dimming option available.
ORDERING INFORMATION
–
EXAMPLE: CKL-1X4-ML-F-UL-40K
–
MODEL
SIZE
CKL Standard
Strip LED
Conversion
Kit
1X4 1X4
Nominal
1X8 1X8
Nominal
–
LUMEN
OUTPUT
XL Extra Low
Non DLC
(35K)
LW Low
ML Medium
HL High
–
CHANNEL WIDTH1
C/4.00 Existing
Width 4.00"
C/4.25 Existing
Width 4.25"
C/4.50 Existing
Width 4.50"
C/5.00 Existing
Width 5.00"
–
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming2
BL Bi-Level3
–
DRIVER
VOLTAGE
UL Universal
120-277 VAC
COLOR
TEMP
35K 3500
40K 4000
50K 5000
FOOTNOTES
1
Contact factory for additional widths available.
2
Must be used in conjunction with lighting controls.
3
Bi-Level driver must be controlled by sensor or A/B switching.
4
When ordered without Primary options sensor is for fixture end mount installation.
5
Must be ordered with sensor, sensor is installed in 8’ ballast cover.
6
No sensor required; for daisy chaining applications.
–
–
OCC SENSOR4
OTHER
DH-SH Digital
Dimming
High-Bay
Sensor
DH-SL Digital
Dimming
Low-Bay
Sensor
DB-SH Digital
Bi-Level
High-Bay
Sensor
DB-SL Digital
Bi-Level
Low-Bay
Sensor
EB Emergency Battery
Backup
LSP Lighting Surge
Protector (270
Joules)
JP Job Pack
DSK Primary-4' LED
Centered in 8
Primary 4' LED
Centered in 8',
No Plug
PR1 PR w/ (1) Female
Plug to Connect RE
Option5
PR2 PR w/ (2) Female
Plugs to connect
RE1 Option5
RE Replica6
RE1 RE w/ (1) Male
Plug to Connect to
PR 1 or 2 Option6
FIXTURE DIMENSIONS
48.060
48.060
4
4.310
3.995
*Drawings N.T.S.
CERTIFICATION
47
VTK
LED Vaportight Retrofit
FEATURES
CONVERSION KIT
• Retrofit existing fluorescent vaportight luminaires
with state-of-the-art low wattage high lumen LED.
• Fast pace upgrade with little clean-up
and no removal of existing fixture.
• 1. Open lens and remove existing lamps, gear
tray and clips 2. Install new clips and wire up
the LED gear tray. 3. Install new lens and go!
• Frosted diffuser for uniform light
distribution without pixilation.
• Very tough diffuser resists breakage and reduces
replacement and maintenance costs.
• To meet certifications ensure existing
fixture matches dimensions shown.
• Hose down & wet location fixture is IP66
rated (Sensored units are IP65 rated).
• Suitable for food production areas, when verified for fit.
• LED light engine eliminates risk of glass
breakage in food production areas.
• Instant re-start, no warm-up times or reduced
light output in cold environments.
• Choice of four lumen packages and
three dimming options available.
• Long-life LEDs at L80 (80% lumen maintenance) at
60,000 hours reduce life cycle maintenance costs.
• Available in 4’ and 8’ lengths.
• Up to 103 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA & Buy
American requirements.
ORDERING INFORMATION
–
EXAMPLE: VTK-1X4-ML-DM-UL-40K
–
–
MODEL
SIZE
VTK VTK LED
Vaportight
Retrofit
1X4 1X4 Nominal
1X8 1X8 Nominal
–
LUMEN
OUTPUT
XL Extra Low
LW Low
ML Medium
–
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming1
–
DRIVER
VOLTAGE
–
OTHER
COLOR
TEMP
UL Universal
120/277
VAC
30K
35K
40K
50K
HL High
3000
3500
4000
5000
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup2
JP Job Pack
ACCESSORIES
(ORDER SEPARATELY)
Zinc Tamper
Resistant Screws
Secure Locking
Plastic Latches
FOOTNOTES
1
Must be used in conjunction with lighting controls.
2
Available for XL, LW, and HL, consult factory for ML option.
Order Part: #95000644
(8 or 14 Required)
Order Part: #95003725
(8 or 14 Required)
FIXTURE DIMENSIONS
51.81"
50.08"
.85"
3.82" Flat
4.21"
6.77"
7.41"
*Drawings N.T.S.
CERTIFICATION
48
IP65
IP66
CERTIFIED
CERTIFIED
VPK
LED Parking Garage Vaportight Retrofit
FEATURES
• Very tough diffuser resists breakage and reduces
replacement and maintenance costs.
• LED light engine eliminates risk of glass
breakage in parking garages.
• Instant re-start, no warm-up times or reduced
light output in cold environments.
• Choice of three lumen packages and
three dimming options available.
• Long-life LEDs at L80 (80% lumen maintenance) at
60,000 hours reduce life cycle maintenance costs.
• Available in 4’ and 8’ lengths.
• Up to 99 lumens per watt.
• Color Rendering Index (CRI) > 80.
• Made In USA. Meets ARRA & Buy
American requirements.
CONVERSION KIT
• Retrofit existing fluorescent vaportight luminaires
with state-of-the-art low wattage high lumen LED.
• Fast pace upgrade with little clean-up
and no removal of existing fixture.
• 1. Open lens and remove existing lamps, gear
tray and clips 2. Install new clips and wire up
the LED gear tray. 3. Install new lens and go!
• Wide distribution works well in low
mounting height applications.
• To meet certifications ensure existing
fixture matches dimensions shown.
• Hose down & wet location fixture is IP66
rated (Sensored units are IP65 rated).
• Frosted deep diffuser ensures visual comfort for drivers.
ORDERING INFORMATION
EXAMPLE: VPK-1X4-LW-F-UL-40K
–
MODEL
VPK LED
Parking
Garage
Vaportight
Retrofit
–
–
SIZE
LUMEN
OUTPUT
1X4 1X4 Nominal
1X8 1X8 Nominal
LW Low
HL High
XL Extra
High
–
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming1
–
DRIVER
VOLTAGE
UL Universal
120/277
VAC
–
COLOR
TEMP
30K
35K
40K
50K
3000
3500
4000
5000
OTHER
LSP Lighting
Surge
Protector
(270 Joules)
EB Emergency
Battery
Backup
JP Job Pack
ACCESSORIES
(ORDER SEPARATELY)
Zinc Tamper
Resistant Screws
Order Part: #95000644
(8 or 14 Required)
FOOTNOTES
1
Must be used in conjunction with lighting controls.
FIXTURE DIMENSIONS
*Drawings N.T.S.
CERTIFICATION
IP65
IP66
CERTIFIED
CERTIFIED
49
TKL
LED Prismatic Troffer Conversion Kit
FEATURES
CONVERSION KIT
• Retrofits fluorescent prismatic
troffers with state-of-the-art Solid
State Lighting technology.
• Output up to 6,400 lumens.
• Up to 127 lumens per watt.
• Rapid installation.
• Long-life, 60,000 hour LEDs at L80
(80% lumen maintenance) reduces
life cycle maintenance costs.
• Choice of four lumen packages
and dimming option available.
• Low W/ft2 to meet the most restrictive
lighting power density codes.
• Reduces job site waste by reusing
existing fixture housing & prismatic lens.
• Color Rendering Index (CRI) > 80.
• Available in both 2x2 and
2x4 configurations.
• Made In USA. Meets ARRA &
Buy American requirements.
ORDERING INFORMATION
EXAMPLE: TKL-2X4-LW-F-UL-35K
–
–
MODEL
SIZE
TKL LED
Prismatic
Troffer
Conversion
Kit
2X2 2x2
Nominal
2X4 2x4
Nominal
–
LUMEN
OUTPUT
XL Extra Low
LW Low
ML Medium
–
UL
DRIVER
OUTPUT
F Fixed
DM 0-10v
Dimming1
DRIVER
VOLTAGE
UL Universal
120-277 Volt
HL High
(2x2 Only)
–
–
COLOR
TEMP
35K 3500
40K 4000
50K 5000
(Non DLC)
OTHER
LSP Lighting
Surge
Protector
EB Emergency
Battery
Backup2
JP Job Pack
FOOTNOTES
1
Must be used in conjunction with lighting controls. Contact factory for assistance.
Emergency Battery Backup: 8 Watt (2x2); 16 Watt (2x4). Lumen value with
emergency driver + battery pack: 2x2 = 692 lumens, 2x4 = 1200 lumens.
2
MINIMUM DIMENSIONS OF EXISTING FIXTURE OPENING
2x2 CROSS SECTION & SIDE VIEW
10.31"
1.96"
23.00" Minimum Required Opening in Existing Fixture
13.81"
1.57"
46.7" Minimum Required Opening in Existing Fixture
*Drawings N.T.S.
CERTIFICATION
50
TKG
LED Prismatic Troffer Guts Retrofit Kit
FEATURES
• Utilizes thermal adhesive for easy
mounting and optimized thermal contact
• Pre-wired components for easy
installation and maintenance
• Compatible with most
lighting control systems
• Five year warranty
CONVERSION KIT
• Low Cost LED Prismatic
Troffer Retrofit Kit
• Long Life 60,000 hour LEDs at
L80 for reduced maintenance
• Four LED color choices and 80 CRI
• Available in 2x2 and 2x4 configurations
• Lumen packages ranging 1,500
to 5,600 lumens (delivered
lumens from LED board)
• Efficacy over 100 LPW
ORDERING INFORMATION
EXAMPLE: TKG-24-40K-LW-E-U
–
MODEL
TKG LED
Retrofit Kit
–
–
SIZE
22 2x2
COLOR TEMP
30 3000K
35 3500K
40 4000K
50 5000K
Nominal
24 2x4
Nominal
–
LUMEN OUTPUT
XW Extra Low Wattage
(2x4 Only)
VW Very Low Wattage
MW Medium Low
LW
ML
HL
VL
FOOTNOTES
1
Bi-Level driver must be controlled by sensor or A/B/ switching.
2
Must be used in conjunction with lighting controls.
3
Recommended for proper placement.
–
DRIVER
VOLTAGE
U Universal
ESD Step Dimming1
120–277 VAC
ED 0-10V
Dimming2
Wattage
Low Wattage
Medium Lumen
High Lumen
Very High Lumen
(2x2 Only)
ACCESSORIES
(ORDER SEPARATELY)
AT Alignment Tool3
FIXTURE DIMENSIONS
Board Depth .125"
Board Width 1"
2"
th 2
B
ng
d Le
oar
4"
th 2
eng
es L
r
i
W
LED
ASSEMBLY
DRIVER
*Drawings N.T.S.
CERTIFICATION
51