LuxBar™
Ardee Lighting
27
LuxBar™ Shelf Light
Product Series
U-Shaped
LED Elements
Specification
Housing
13/8" W x 15/16" H (35mm x 33mm) extruded aluminum channel with
flush, snap-in fit clear acrylic lens. Specify in lengths from 013.0
(331mm) to 058.0 (1474 mm) for Micro-Watt LED (MWL) and
High-Performance LED (HPL) lamping, in 1/8" (3mm) increments. See
Fractional Equivalents chart for correct numbering of lengths with
fractions.
Mounting
Low profile mini junction box, with ½" (13mm) knockouts located at
the top and end. Mounting hardware allows the fixture to rotate and
lock in place.
LuxBar™ Series miniature U-shape profile LED Shelf
Light is a sleek low energy solution for illuminating
spaces below shelving in display cabinets, bookcases,
kitchens, or any other application using an overhanging
lip or cove. With its damp location rating, Shelf Light is
ideal for use in refrigerated displays.
Lamps
Choice of MWL Series 0.6 watt or HPL Series 1.0 watt LED
elements. Also available, for HPL Series 1.0 watt LED elements only,
focusing lens optics in standard configurations: F, all 50° optics; T, all
12° optics; S1, a combination of 50° and 12° optics; S2, a combination
of 50° optics and open elements; or S3, a combination of 12° optics and
open elements. Consult factory for other configurations. Standard color
temperatures available in W: 2800°k, N: 3500°k or C: 5000°k.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbu
u1
Series
lbu
LuxBar U-Shaped
Mounting
u1
Shelf Light, Remote Transformer
Factory installed lens
optics available for
HPL and MWL display
and accent lighting.
Overall Fixture Length
013.0-058.0
MWL/HPL
in 1/8" increments, as inches.eighths (see Fractions Chart)
Lamp
m
h
f
t
s1
s2
s3
MWL-6A
HPL-1A
No Lens
HPL-1A
50° Lens
HPL-1A
12° Lens
HPL-1A
12° Lens /
50° Lens
HPL-1A
50° Lens /
No Lens
HPL-1A
12° Lens /
No Lens
Color Temperature
w
n
c
2800°K
3500°K
5000°K
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
28
www.ardeelighting.com
™ Shelf Light
LuxBarModuleX
M3
U-Shaped LED Elements
ProductMounting
Series Specification
Information
Spacing
Lamps without optics may be mounted on either Alternate Spacing,
33/4" (96mm) centers (recommended), or Standard Spacing, 17/8"
(48mm) centers. Lamps with optics (S1, S2, S3) are Standard
Spaced 17/8" centers only.
Electrical - Remote Transformer
Magnetic low voltage AC transformer, with 24V secondary required
to power fixtures with MWL or HPL Series LEDs. Order separately.
Finishes
Available in Satin Anodized Aluminum, White, Black,
Bronze or Gold powder coat paint. Consult factory for
custom finishes.
Compliances
listing for use as a light in the storage area of a
closet as defined by the 2008 NEC Article 410.
Fractional Equivalents
Eighths Decimal
0/8"
.000"
SA
SG
1/8"
.125"
1/4"
.250"
3/8"
.375"
SA
WH
Length Eighths Decimal Length
.0
.4MS
1/2"
.500"
WH
BK
BZ
.1
.5
5/8"
.625"
.2
.6
3/4"
.750"
.3
.7
7/8"
.875"
BK
BZ
GD
MS
Ardee Lighting
29
LuxBar™ Undercabinet
Oval Shaped Fluorescent
Housing
13/8" W x 17/8" H (35mm x 46mm) extruded aluminum channel with
snap-in fit clear acrylic lens. Specify in lengths from 028.3 (721mm)
to 064.3 (1636mm) in 1/8" (3mm) increments.
See Fractional Equivalents Chart for lengths including fractions.
Mounting
Low profile mini junction box, with 1/2" (13mm) knockouts located at
the top and end. Mounting hardware allows the fixture to rotate and
lock in place.
Undercabinet LuxBar™ Series miniature oval profile T5
fluorescent closet light is an ideal energy efficient
solution for illuminating spaces below shelving in display
cabinets, bookcases, kitchens, or any other application
using an overhanging lip or cove. Includes T5 lamp with
choice of color temperatures.
Lamps
T5 fluorescent lamp included.
Optional neutral density lamp sleeve fine-tunes illumination.
Electrical - Remote Transformer
Integral T5 Class P, HPF, thermally protected electronic ballast
available in 120V, 277V or 230V.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbv
u2
w
Series
lbv
LuxBar Oval Shaped
Mounting
u2
Undercabinet, Integral Ballast
Overall Fixture Length
028.3-064.3
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Lamp
5
7
T5
T5 with
Neutral Density Sleeve
Color Temperature
w
3000°K
Voltage
1
2
3
120v
277v
230v
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
30
www.ardeelighting.com
LuxBar™ Undercabinet
Oval Shaped Fluorescent Mounting Information
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
Compliances
listed for use as an undercabinet luminaire. Suitable for damp
location.
NOTE: Ballast, mounting hardware, and choice of lamp are included to make
a complete fixture.
Fractional Equivalents
Eighths Decimal
SA
SG
0/8"
.000"
1/8"
.125"
1/4"
.250"
3/8"
.375"
SA
WH
Length Eighths Decimal Length
WH
BK
BZ
.0
.4MS
1/2"
.500"
.1
.5
5/8"
.625"
.2
.6
3/4"
.750"
.3
.7
7/8"
.875"
BK
BZ
GD
MS
Ardee Lighting
31
LuxBar™ Closet Rod
U-Shaped LED Elements
Mounting
Stem mounting
1/8" (3mm) IPS stems
and mounting hardware provided for each end.
4" (102mm) square junction box supplied for stem mount option. Intermediate support stems are included as required.
End mounting
31/4" (83mm) OD
LuxBar™ Series miniature U-shape profile LED Closet
Rod is an ideal low energy solution for illuminating
hanging garments in prestigious hotels, boutiques, and
luxury residences. The LuxBar™ system is available in
stem and end mounting to suit any type of installation.
machined aluminum mounting plates and mounting
hardware provided for each end when remote electrical gear is
specified. 5" (127mm) OD machined aluminum mounting plates and
33/4" square box (deep) for integral mounting option. Intermediate
support stems are included as required.
Housing
END MOUNT
END MOUNT
- REMOTE
END
- REMOTE
MOUNT - REMOTE
END MOUNT
END MOUNT
- INTEGRAL
END
- INTEGRAL
MOUNT - INTEGRAL
STEM STEM
MOUNT
MOUNT
- REMOTE
STEM
- REMOTE
MOUNT - REMOTE
13/8" W x 15/16" (35mm x 33mm) extruded aluminum
4.0"
4.0"
4.0"
channel with flush, snap-in fit clear acrylic lens. Specify
101.6mm101.6mm
101.6mm
1.625" 1.625"
1.625"
lengths from 011.7 (302mm) to 117.3 (2982mm) for
J-BOX
J-BOX
J-BOX
41.3mm 41.3mm
41.3mm
Micro-Watt LED (MWL) or High-Performance (HPL)
ø0.39" ø0.39"
ø0.39"
2.0"
2.0"
2.0"
10.0mm 10.0mm
10.0mm
50.8mm 50.8mm
50.8mm
LED lamping. See Fractional Equivalents chart for
correct part numbering for fractional lengths. Complete
fixture supplied with a choice of either Stem or End
0.63"
0.63"
0.63"
16mm 16mm
16mm
mounting.
SPECIFY LENGTH
SPECIFY LENGTH SPECIFY LENGTH
INTERMEDIATE
INTERMEDIATE
SUPPORT SYSTEM
SUPPORT SYSTEM
INTERMEDIATE
SUPPORT SYSTEM
REMOTE
REMOTE
TRANSFORMER
TRANSFORMER
REMOTE TRANSFORMER
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
INTERMEDIATE
INTERMEDIATE
ø0.39"
SUPPORT SYSTEM
SUPPORT SYSTEM
10.0mm
ø0.39" ø0.39"
10.0mm 10.0mm
lbu
HOUSINGHOUSING
LENS
LENS
SPECIFY LENGTH
SPECIFY LENGTH
Series
lbu
2.125" 2.125"
54.0mm 54.0mm
2.125"
54.0mm
J-BOX
J-BOX
J-BOX
1.22" OD 1.22" OD
31mm 31mm
HOUSING
1.22" OD
31mm
LENS
SPECIFY LENGTH
To specify
To specify
End Mount
End fixture
Mount
To specify
length,
fixture
Endlength,
deduct
Mountdeduct
1/8"
fixture
(3mm)
1/8"
length,
(3mm)
from
deduct
the
from
overall
1/8"
the(3mm)
overall
length from
of
length
thethe
exact
ofoverall
theinside
exact
length
dimension.
inside
of the
dimension.
exact inside dimension.
REMOTE
REMOTE
TRANSFORMER
TRANSFORMER
REMOTE TRANSFORMER
LuxBar U-Shaped
Intermediate
Intermediate
Supports
Intermediate
Supports
(incl.)(incl.)
Supports (incl.)
LengthLength
Supports
Supports
Provided
Length
Provided
Supports Provided
3'-6' 3'-6'
1 3'-6'
1
1
7'-9' 7'-9'
2 7'-9'
2
2
10' 10'
3 10'3
3
Mounting
e1
e2
s1
Closet Rod, End Mount
Remote Transformer
Closet Rod, End Mount
Integral Transformer
Closet Rod, Stem Mount
Remote Transformer
012.0-120.0
For End Mount (E1), deduct 1/8" from exact wall-to-wall dimension
Lamp
m
h
f
t
s1
s2
s3
MWL-6A
HPL-1A
No Lens
HPL-1A
50° Lens
HPL-1A
12° Lens
HPL-1A
12° Lens /
50° Lens
HPL-1A
50° Lens /
No Lens
HPL-1A
12° Lens /
No Lens
Color Temperature
w
n
c
2800°K
3500°K
5000°K
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
3.5"
3.5"
88.9mm 88.9mm
www.ardeelighting.com
2.63"
73mm
3.5"
88.9mm
3.75"
3.75"
95.3mm 95.3mm
INTEGRAL
INTEGRAL
TRANSFORMER
TRANSFORMER
INTEGRAL TRANSFORMER
OR LED
ORDRIVER
LED DRIVER
OR LED DRIVER
Stem-to-Stem
32
INTERMEDIATE
SUPPORT SYSTEM
3.75"
95.3mm
LuxBar™ Closet Rod
U-Shaped LED Elements Mounting Information
Lamps
Choice of MWL Series 0.6W or HPL Series 1.0W LED Elements
mounted on either Alternate Spacing, 33/4" (96mm) centers, or
Standard Spacing, 17/8" (48mm) centers. Also available, for HPL
Series 1.0W LED Elements only, focusing lens optics in standard
configurations: F, all 50° optics; T, all 12° optics, on either Alternate
or Standard spacing; or S1, a combination of 50° and 12° optics; S2,
a combination of 50° and open element optics; or S3, a combination
of 12° and open element optics, mounted on Standard spacing 17/8"
(48mm) centers only. Consult factory for other configurations. Standard
color temperatures available in W: 2800°k, N: 3500°k or C: 5000°k.
Spacing
MWL and HPL elements with single optics (M, H, T, F) or without
optics are available in Alternate Spacing, 33/4" (96mm) centers
(recommended), or Standard Spacing, 17/8" (48mm) centers. HPL
elements with optic combinations (S1, S2, S3) are Standard Spaced
17/8" centers only.
Electrical
Remote
Magnetic low voltage AC transformer, with 24V secondary
required to power fixtures with MWL or HPL Series
LEDs.
Integral
Magnetic low voltage AC transformer, with 24V secondary
required to power fixtures with MWL or HPL Series
LEDs.
Finishes
Available in Satin Anodized Aluminum, White, Black,
Bronze or Gold powder coat paint. Consult factory for
custom finishes.
Compliances
listed for use as a light in the storage area
of a closet as defined by the 2008 NEC Article 410.
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
SA
SG
WH
BK
BZ
.0
.4MS
0/8"
.000"
1/2"
.500"
.1
.5
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
33
LuxBar™ Closet Rod
Oval Shaped Fluorescent
Mounting
Stem mounting
1/8" (3mm) IPS stems and mounting hardware provided for each
end. 4" (102mm) square junction box supplied for stem mount option.
Intermediate support stems are included as required.
end mounting
3¼" (83mm) OD machined aluminum mounting plates and mounting
hardware provided for each end. Intermediate support stems are
included as required.
LuxBar™ Series miniature oval profile T5 fluorescent
illuminated Closet Rod is an ideal energy efficient
solution for illuminating hanging garments in prestigious
hotels, boutiques, and luxury residences.
Lamps
T5 fluorescent lamp included. Optional neutral density lamp sleeve
fine tunes illumination.
Housing
13/8" W x 17/8" H (35mm x 46mm) extruded aluminum
channel with snap-in fit clear acrylic lens. Specify lengths
from 024.0 (610mm) to 120.0 (3050mm) in 1/8" (3mm)
increments. See Fractional Equivalents Chart for correct
part numbering for fractional lengths. Complete fixture
supplied with a choice of either Stem or End mounting.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
w
lbv
Series
lbv
LuxBar Oval Shaped
Mounting
e2
s2
Closet Rod, End Mount
Integral Ballast
Closet Rod, Stem Mount
Integral Ballast
Stem-to-Stem
024.0-120.0
in 1/8" increments, as inches eighths, (see Fractions Chart)
For End Mount (E2), deduct 1/8" from exact wall-to-wall dimension
Lamp
5
7
T5
T5 with
Neutral Density Sleeve
Color Temperature
w
3000°K
Voltage
1
2
3
120v
277v
230v
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
34
www.ardeelighting.com
LuxBar™ Closet Rod
Oval Shaped Fluorescent Mounting Information
Electrical
Integral T5 Class P, HPF, thermally protected electronic ballast
available in 120V, 277V or 230V.
Compliances
listed for use as a light in the storage area
of a closet as defined by the 2008 NEC Article 410.
Finishes
Available in Satin Anodized Aluminum or Gold, White, Black, or Bronze
powder coat paint. Consult factory for custom finishes.
NOTE: Ballast, mounting hardware, and choice of lamp are
included to make a complete fixture.
Fractional Equivalents
Length
Eighths
Decimal
Eighths
SA
SG
WH
BK Decimal
BZ Length
MS
.0
.4
0/8"
.000"
1/2"
.500"
.1
.5
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
35
LuxBar™ Closet Rod
Round Shaped LED Elements
Mounting
Stem mounting
1/8" (3mm) IPS stems
and mounting hardware provided for each end.
4" (102mm) square junction box with electrical gear supplied for
stem mount option. Intermediate support stems are included as
required.
End mounting
31/4" (83mm) OD
LuxBar™ Series miniature round shape profile LED
Closet Rod is an ideal low energy solution for illuminating
hanging garments in prestigious hotels, boutiques, and
luxury residences. The LuxBar™ system is available in
stem and end mounting to suit any type of installation.
Housing
13/8" OD (35mm) extruded aluminum channel with
snap-in fit clear acrylic lens. Specify length from 011.7
(302mm) to 117.3 (2982mm) in 1/8" (3mm) increments.
See Fractional Equivalents Chart for designations for
lengths including fractions. Complete fixture supplied
with a choice of either Stem or End mounting.
machined aluminum mounting plates and mounting
hardware provided for each end when remote electrical gear is
specified. 5" (127mm) OD machined aluminum mounting plates and
33/4" square box (deep) for integral mounting. Intermediate support
stems are included as required.
Lamps
Choice of Clikstrip™ MWL Series 0.6W or HPL Series 1.0W LED
elements with standard color temperatures available in W: 2800°k,
N: 3500°k or C: 5000°k.
Spacing
Elements may be mounted on either Alternate Spacing, 33/4"
(96mm) centers (recommended), or Standard Spacing, 17/8" (48mm)
centers.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbr
Series
lbr
LuxBar Round Shaped
Mounting
e1
e2
s1
Closet Rod, End Mount
Remote Transformer
Closet Rod, End Mount
Integral Transformer
Closet Rod, Stem Mount
Remote Transformer
Stem-to-Stem
012.0-120.0
in 1/8" increments, as inches.eighths, (see Fractions Chart)
For End Mount (E1 or E2), deduct 1/8" from exact wall-to-wall dimension
Lamp
m
h
MWL-6A
HPL-1A
No Lens
Color Temperature
w
n
c
2800°K
3500°K
5000°K
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
36
www.ardeelighting.com
LuxBar™ Closet Rod
Round Shaped LED Elements Mounting Information
Electrical
Remote
Magnetic low voltage AC transformer, with 24V secondary required to
power fixtures with MWL or HPL Series LEDs. Order separately.
Finishes
Available in Satin Anodized Aluminum, White, Black,
Bronze or Gold powder coat paint. Consult factory for
custom finishes.
Integral
Fixture supplied with magnetic low voltage AC transformer, with 24V
secondary.
Compliances
listed for use as a light in the storage area
of a closet as defined by the 2008 NEC Article 410.
Fractional Equivalents
Eighths Decimal
0/8"
.000"
SA
SG
1/8"
.125"
1/4"
.250"
3/8"
.375"
SA
WH
Length Eighths Decimal Length
.0
.4
1/2"
.500"
WH
BK
BZ
MS
.1
.5
5/8"
.625"
.2
.6
3/4"
.750"
.3
.7
7/8"
.875"
BK
BZ
GD
MS
Ardee Lighting
37
LuxBar™ Closet Rod
Round Shaped Fluorescent
Mounting
Stem mounting
1/8" (3mm) IPS stems
and mounting hardware provided for each end.
4" (102mm) square junction box with electrical gear supplied for
stem mount option. Intermediate support stems are included as
required.
End mounting
31/4" (83mm) OD
machined aluminum mounting plates and mounting
hardware provided for each end when remote electrical gear is
specified. Intermediate support stems are included as required.
LuxBar™ Series miniature round profile T5 fluorescent
illuminated Closet Rod is an ideal energy efficient
solution for illuminating hanging garments in prestigious
hotels, boutiques, and luxury residences. The LuxBar™
system is available in stem and end mounting to suit
any type of installation.
Lamps
T5 fluorescent lamp included. Optional neutral density lamp sleeve
fine-tunes illumination.
Housing
13/8" OD (35mm) extruded aluminum channel with
snap-in fit ribbed acrylic lens. Specify length from 024.0
(610mm) to 120.0 (3050mm) in 1/8" (3mm) increments.
See Fractional Equivalents Chart for designations for
lengths including fractions. Complete fixture supplied
with a choice of either Stem or End mounting.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbr
w
Series
lbR
LuxBar Round Shaped
Mounting
e1
s1
Closet Rod, End Mount
Remote Ballast
Closet Rod, Stem Mount
Remote Ballast
Stem-to-Stem
024.0-120.0
in 1/8" increments, as inches.eighths, (see Fractions Chart)
For End Mount (E1), deduct 1/8" from exact wall-to-wall dimension
Lamp
5
7
T5
T5 with
Neutral Density Sleeve
Color Temperature
w
3100°K
Voltage
1
2
3
120v
277v
230v
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
38
www.ardeelighting.com
LuxBar™ Closet Rod
Round Shaped Fluorescent Mounting Information
Electrical
Fixture supplied with a T5 Class P, HPF, thermally protected electronic
ballast in a Listed wiring enclosure suitable for remote mounting.
Ballasts available in 120V, 277V or 230V.
Compliances
listed for use as a light in the storage area
of a closet as defined by the 2008 NEC Article 410.
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
SA
SG
WH
BK
BZ
MS
.0
.4
0/8"
.000"
1/2"
.500"
.1
.5
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
Stem
Mount
SA
WH
BK
BZ
End Mount
MS
GD
Ardee Lighting
39
LuxBar™ Display Light
U-Shaped LED Elements
Housing
13/8" W x 15/16" (35mm x 33mm) extruded aluminum channel with flush,
snap-in fit clear acrylic lens. For Single Units (D1), specify lengths from
014.5 (372mm) to 120.1 (3051mm) for Micro-Watt or High Performance
LED lamping. For Multiple System units (M1, M2, or M3), specify lengths
from 013.4 (343mm) to 059.0 (1499mm) for MWL/HPL lamping. All units
specified in n 1/8" (3mm) increments. Includes machined aluminum end
caps that rotate 330° and lock in place.
Mounting
Fixtures supplied with a pair of 2" (51mm) diameter round machined
aluminum canopies, a custom junction box and (2) 1/2" (13mm)
diameter metal tube stems which may be cut in the field. Select standard
stem lengths from 6" (152mm) to 30" (762mm).
LuxBar™ Series miniature U-shaped profile LED
Display Light is an ideal energy saving solution for
illuminating artwork, signage, menu boards, and
merchandising displays or use as a linear wall washer
for accenting walls. Can be wall or ceiling mounted in
a choice of stem lengths. For longer fixtures, multiple
unit systems provide a nearly limitless overall length.
Lamps
Choice of Clikstrip™ MWL Series 0.6 watt or HPL Series 1.0 watt LED
elements Also available, for HPL Series 1.0W LED Elements only,
focusing lens optics in standard configurations: F: all 50° optics, T: all
12° optics, S1: a combination of 50° and 12° optics, S2: a combination
of 50° optics and open elements, or S3: a combination of 12° optics
and open elements. Consult factory for other configurations. Standard
color temperatures available in W: 2800°k, N: 3500°k or C: 5000°k.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbu
Series
lbu
LuxBar U-Shaped
Mounting - Single Unit
d1
Display Light
Single Unit
Mounting - Multiple Units
m1
m2
m3
Display Light
Starter
Display Light
Intermediate
Display Light
End
Stem-to-Stem
014.1-062.1
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Stem Length
1
2
3
4
5
006.0
012.0
018.0
024.0
030.0
Lamp
m
h
f
t
s1
s2
s3
MWL-6A
HPL-1A
No Lens
HPL-1A
50° Lens
HPL-1A
12° Lens
HPL-1A
12° Lens /
50° Lens
HPL-1A
50° Lens /
No Lens
HPL-1A
12° Lens /
No Lens
Color Temperature
w
n
c
2800°K
3500°K
5000°K
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin Aluminum
White
Black
Bronze
Gold
40
www.ardeelighting.com
2.125"
54.0mm
1.22" OD
31mm
C
2.125"
54.0mm
LuxBar™ Display Light
2.125" OD
54mm
U-Shaped LED Elements Mounting Information
0.34"
8.6mm
1.787"
45.4mm
Spacing
0.81"
0.81"
20.6mm
MWL
and HPL LED elements with
single optic styles (M, H, T,20.6mm
F) or
A
B
without optics can be mounted on
either Alternate Spacing, 33/4"
(96mm) centers (recommended), or Standard Spacing, 17/8" (48mm)
centers. HPL elements with optic combinations (S1, S2, S3) are
Standard Spaced 1 7/8" centers only.
330°
ROTATION
0.81"
20.5mm
0.21"
5.3mm
Finishes
Available in Satin Anodized Aluminum, White, Black,
Bronze or Gold powder coat paint. Consult factory for
custom finishes.
Compliances
listed for damp locations.
Electrical
Remote
Magnetic low voltage AC transformer, with 24V secondary required to
power fixtures with MWL or HPL Series LEDs. Order separately.
1.333"
33.9mm
M3 End
1.151"
29.2mm
B
A
M2 Intermediate
M1 Starter
Factory installed lens
optics available
for display and accent
lighting.
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
.0
.4
0/8"
.000"
1/2"
.500"
SA
SG
WH
BK
BZ
.1
.5MS
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
41
LuxBar™ Display Light
Oval Shaped Fluorescent
Housing
13/8" W x 17/8" H (35mm x 46mm) extruded aluminum channel with
snap-in fit clear acrylic lens. Specify in lengths from 026.6 (679mm)
to 062.6 (1594mm) for single fixtures; from 026.1 (662mm) to 062.1
(1576mm) for multiple fixture system units, in 1/8" increments. See
Fractional Equivalents Chart for lengths including fractions. Fixture
includes machined aluminum end caps that rotate 330° and lock in
place
LuxBar™ Series miniature oval profile T5 Display Light
is an ideal energy saving solution for illuminating artwork,
signage, menu boards, and merchandising displays or
use as a linear wall washer for accenting walls. Can be
wall or ceiling mounted in a choice of stem lengths. For
longer fixtures, multiple unit systems provide a nearly
limitless overall length. Available in energy efficient T5
or T5HO fluorescent.
Mounting
Fixtures supplied with a pair of 2" (51mm) diameter round machined
aluminum canopies, a custom junction box and (2) 1/2" (13mm)
diameter metal tube stems which may be cut to length in the field.
Select standard stem lengths from 6" (152mm) to 30" (762mm).
Lamps
T5 or T5HO fluorescent lamp included. Electrical
Integral T5 or remote mounted T5HO Class P, HPF, thermally
protected electronic ballast. Remote ballast supplied in a Listed
wiring enclosure. Ballasts available in 120V, 277V or 230V
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
w
lbV
Series
lbv
LuxBar Oval Shaped
Mounting - Single Unit
d1
Display Mount
Single Unit
Mounting - Multiple Units
m1
m2
m3
Display Starter Display Intermediate Display End
Multiple Units
Multiple Units Multiple Units
Stem-to-Stem
014.1-062.1
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Stem Length
1
2
3
4
5
006.0
012.0
018.0
024.0
030.0
Lamp
5
6
T5
Integral only
T5HO
Remote only
Color Temperature
w
3100°K
Voltage
1
2
3
120v
277v
230v
Finish
sa
wh
bk
bz
gd
Satin Aluminum
White
Black
Bronze
Gold
42
www.ardeelighting.com
30.9mm
1"
25.4mm
45.4mm
330°
ROTATION
1"
25.4mm
A
LuxBar™ Display Light
Oval Shaped Fluorescent Mounting Information
B
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
Compliances
listed for damp locations.
NOTE: Ballast, mounting hardware, and choice of lamp are
installed to make a complete fixture.
1.333"
33.9mm
M3 End
B
A
M2 Intermediate
M1 Starter
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
.0
.4
0/8"
.000"
1/2"
.500"
SA
SG
WH
BK
BZ
.1
.5MS
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
43
LuxBar™ Display Light
Round Shaped Xenon Mounting Information
Housing
13/8" OD (35mm) extruded aluminum channel with snap-in fit ribbed
acrylic lens. Specify lengths from 014.5 (372mm) to 120.1 (3051mm)
for single fixtures; from 014.0 (354mm) to 059.4 (1509mm) for multiple
fixture system units, in 1/8" (3mm) increments. See Fractional
Equivalents Chart for lengths including fractions. Includes machined
aluminum end caps that rotate 330° and lock in place.
LuxBar™ Series miniature round profile Xenon Display
Light is an ideal solution for illuminating artwork, signage,
menu boards, and merchandising displays or use as a
linear wall washer for accenting walls. Can be wall or
ceiling mounted in a choice of stem lengths. For longer
fixtures, multiple unit systems provide a nearly limitless
overall length.
Mounting
Fixtures supplied with a pair of 2" (51mm) diameter round machined
aluminum canopies, a custom junction box and (2) 1/2" (13mm)
diameter metal tube stems which may be cut to exact length in the
field. Select standard stem lengths from 6" (152mm) to 30" (762mm).
Lamps
Xenon festoon lamps, clear or frosted, 3 watts in either 12vac or 24vac.
Electrical
Remote mounted low voltage transformer required. Order separately.
Ordering information
To specify a complete catalog number, choose one item from the selection available in each module.
lbr
x
Series
lbr
LuxBar Round Shaped
Mounting - Single Unit
d1
Display Light
Single Unit
Mounting - Multiple Units
m1
m2
m3
Display Starter Display Intermediate Display End
Multiple Units
Multiple Units Multiple Units
Stem-to-Stem
014.1-162.1
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Stem Length
1
2
3
4
5
006.0
012.0
018.0
024.0
030.0
Lamp
x
Xenon
Color Temperature
C
F
Clear
Frosted
Voltage
2
4
12v
24v
Wattage
3
3 watt
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin Aluminum
White
Black
Bronze
Gold
44
www.ardeelighting.com
3
LuxBar™ Display Light
1.22"
30.9mm
1"
25.4mm
1.787"
45.4mm
330°
Round1"25.4mm
Shaped Xenon
Mounting Information
ROTATION
A
B
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
Compliances
listed for damp locations.
1.333"
33.9mm
M3 End
B
A
M2 Intermediate
M1 Starter
Fractional Equivalents
Eighths Decimal
0/8"
.000"
SA
SG
1/8"
.125"
1/4"
.250"
3/8"
.375"
SA
WH
Length Eighths Decimal Length
.0
.4
1/2"
.500"
WH
BK
BZ
.1
.5MS
5/8"
.625"
.2
.6
3/4"
.750"
.3
.7
7/8"
.875"
BK
BZ
GD
MS
Ardee Lighting
45
LuxBar™ Display Light
Round Shaped LED Element
Housing
13/8" OD (35mm) extruded aluminum channel with snap-in fit ribbed
acrylic lens. Specify in lengths from 014.5 (372mm) to 120.1
(3051mm) for single fixtures (D1); from 013.2 (336mm) to 058.6
(1492mm) for multiple fixture system units (M1, M2, or M3) in 1/8"
(3mm) increments. See Fractional Equivalents Chart for lengths
including fractions. Fixture includes machined aluminum end caps
that rotate 330° and lock in place.
LuxBar™ Series miniature round profile LED Display
Light is an ideal solution for illuminating artwork, signage,
menu boards, and merchandising displays or use as a
linear wall washer for accenting walls. Can be wall or
ceiling mounted in a choice of stem lengths. For longer
fixtures, multiple unit systems provide a nearly limitless
overall length.
Mounting
Fixtures supplied with a pair of 2" (51mm) diameter round machined
aluminum canopies, a custom junction box and (2) 1/2" (13mm)
diameter metal tube stems which are field cuttable. Select standard
stem lengths from 6" (152mm) to 30" (762mm).
Lamps
Choice of Clikstrip™ MWL Series 0.6W or HPL Series 1.0W LED
elements. Standard color temperatures available in W: 2800°k, N:
3500°k or C: 5000°k
Spacing
MWL and HPL elements are available mounted on Alternate Spacing,
33/4" (96mm) centers (recommended), or Standard Spacing, 17/8"
(48mm) centers.
Ordering information
To specify a complete catalog number, choose one
item from the selection available in each module.
lbr
Series
lbr
LuxBar Round
Shaped
Mounting - Single Unit
d1
Display Light
Single Unit
Mounting - Multiple Units
m1
m2
m3
Display Starter Display Intermediate Display End
Multiple Units
Multiple Units Multiple Units
Stem-to-Stem
014.1-062.1
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Stem Length
1
2
3
4
5
006.0
012.0
018.0
024.0
030.0
Lamp
m
h
MWL-6A
HPL-1A
No Lens
Color Temperature
w
n
c
2800°K
3500°K
5000°K
Spacing
a
s
33/4" On Center
17/8" On Center
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
46
www.ardeelighting.com
1.22"
30.9mm
1"
25.4mm
1.787"
45.4mm
LuxBar™ Display Light
330°
ROTATION
1"
25.4mm
Round Shaped LED Element Mounting Information
A
B
Compliances
listed for damp locations.
Electrical
Magnetic low voltage AC transformer, with 24V secondary required. Remote mounted. Order separately.
* On Multi-Bay fixtures with a power feed for each 8' section,
each section limited to 45 LEDs.
* On Multi-Bay fixtures with ONE power feed for the entire 8' run,
the entire run is limited to 45 LEDs.
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
1.333"
33.9mm
M3 End
B
A
M2 Intermediate
M1 Starter
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
.0
.4
0/8"
.000"
1/2"
.500"
SA
SG
WH
BK
BZ
.1
.5MS
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
47
LuxBar™ Display Light
Round Shaped Fluorescent
Housing
13/8" OD (35mm) extruded aluminum channel with snap-in fit ribbed
acrylic lens. Specify in lengths from 026.6(679mm) to 062.6
(1593mm) for single fixtures (D1); from 026.1 (662mm) to 062.1
(1576mm) for multiple fixture system units in 1/8" (3mm) increments. When specifying lengths including fractions, use Fractional
Equivalents Chart for correct numbering. Fixture includes machined
aluminum end caps that rotate 330° and lock in place.
LuxBar™ Series miniature round profile T5 Display
Light is an ideal energy saving solution for illuminating
artwork, signage, menu boards, and merchandising
displays or use as a linear wall washer for accenting
walls. Can be wall or ceiling mounted in a choice of
stem lengths. For longer fixtures, multiple unit systems
provide a nearly limitless overall length. Available in
energy efficient T5 or T5HO fluorescent.
Mounting
Fixtures supplied with a pair of 2" (51mm) diameter round machined
aluminum canopies, a custom junction box and (2) 1/2" (13mm)
diameter metal tube stems which may be cut to exact lengths in the
field. Select standard stem lengths from 6” (152mm) to 30" (762mm).
Lamps
T5 or T5HO fluorescent lamp included.
Electrical
Fixture supplied with a T5 or T5HO Class P, HPF, thermally protected
electronic ballast in a Listed wiring enclosure suitable for remote
mounting. Ballasts available in 120V, 277V or 230V.
Ordering information
To specify a complete catalog number, choose one item from the selection available in each module.
w
lbr
Series
lbr
LuxBar Round Shaped
Mounting - Single Unit
d1
Display Light
Single Unit
Mounting - Multiple Units
m1
m2
m3
Display Starter Display Intermediate Display End
Multiple Units
Multiple Units Multiple Units
Stem-to-Stem
026.1-062.1
in 1/8" increments, as inches.eighths, (see Fractions Chart)
Stem Length
1
2
3
4
5
006.0
012.0
018.0
024.0
030.0
Lamp
5
6
T5
T5HO
Color Temperature
w
3000°K
Voltage
1
2
3
120V
277V
230V
Finish
sa
wh
bk
bz
gd
Satin
Aluminum
White
Black
Bronze
Gold
48
www.ardeelighting.com
30.9mm
1"
25.4mm
45.4mm
330°
ROTATION
1"
25.4mm
A
LuxBar™ Display Light
Round Shaped Fluorescent Mounting Information
B
Finishes
Available in Satin Anodized Aluminum, White, Black, Bronze or Gold
powder coat paint. Consult factory for custom finishes.
Compliances
listed for damp locations.
NOTE: Ballast, mounting hardware, and choice of lamp are
installed to make a complete fixture.
* On Multi-Bay fixtures with a power feed for each 8' section,
each section limited to 45 LEDs.
* On Multi-Bay fixtures with ONE power feed for the entire 8' run,
the entire run is limited to 45 LEDs.
1.333"
33.9mm
M3 End
B
A
M2 Intermediate
M1 Starter
Fractional Equivalents
Eighths Decimal Length Eighths Decimal Length
.0
.4
0/8"
.000"
1/2"
.500"
SA
SG
WH
BK
BZ
.1
.5 MS
1/8"
.125"
5/8"
.625"
.2
.6
1/4"
.250"
3/4"
.750"
.3
.7
3/8"
.375"
7/8"
.875"
SA
WH
BK
BZ
GD
MS
Ardee Lighting
49