PROJECT: TYPE: C6S SERPENTINE LED COVE LINEAR LIGHTING, HIGH LUMEN INTEGRAL POWER SYSTEM C6S 2FT MODULE APPLICATION 2.0 in The C6S Serpentine product line is designed for high lumen cove lighting as well as wall washing and wall grazing. One foot modules pivot +/- 90 degrees to turn corners or wrap around a curve while maintaining seamless illumination. A unique sliding expansion link, integral to each module, expands 1 inch allowing field adjustable length while maintaining even light distribution. [51 mm] 2.0 in [51 mm] Designed with modular CLiP® (Configurable Lighting Platform), C6R provides options to suit multiple application requirements. 2.1 in [53 mm] CONSTRUCTION POWER SYSTEM • Aluminum housings power coat painted in light gray, standard • Integral driver • Mechanical pivot points articulate up to 90º while maintaining even illumination • Unique sliding expansion link can expand luminaire up to 1” in length per foot providing field adjustability while maintaining uniform light distribution • Sections available in lengths of 2ft, 3ft, 4ft, 5ft or 6ft and may be joined to form extended linear runs • Fully compliant with NEC Article 400 Shown with lightly frosted lens (10) • Electronic Low Voltage or Triac dimming PERFORMANCE • Nominal 510-970 delivered lumens per foot C6S 2FT MODULE No Factory in the Field® C6S is designed for ease of in maintenance. installation2.0and [51 mm] • Operating temperature range of -20ºC to 50ºC • Rated for a minimum of 86,000 hours (L85) at 25°C ambient operating temperature • Power Supply Total Harmonic Distortion <20%, Power Factor >0.9 WARRANTY 2.5 in Tempo provides a 5-year [64 mm]limited warranty. 2.1 in • CSA damp location listed [53 mm] LIGHT CHARACTERISTICS • 2700K, 3000K, 3500K and 4000K Color Temperature options OPTICS / LENS / DIFFUSER • Lightly frosted acrylic lens • Half dome lens with 10º x 60º, 60º, 35º or asymmetric wall wash/graze optic available • Typical CRI of 80+, 90+ CRI option available with 2700K, 3000K or 3500K selection EXTENSION DETAIL • LED’s are selected and placed on the printed circuit boards via Tempo Industries’ UniBin® process which ensures consistent hue and color within the entire installation. Color variations are held to a minimum, within a 2-step MacAdam ellipse. 12.0 in [305 mm PERFORMANCE SUMMARY All data nominal. Watts/ft 5 8.8 10 (10º x 60º optic) Lumens/ft 510 900 970 Lumens/Watt 102 102 97 Maximum Run Length* 190ft 110ft 95ft *Based on 120V input. SPEC_C6S-5_16_a Page 1 of 4 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com C6S SERPENTINE LED COVE LINEAR LIGHTING, HIGH LUMEN INTEGRAL POWER SYSTEM ORDERING INFORMATION Example: 25ft C6S00-12-1012-UNVE88-D27S-LG 25 feet of C6S, 12” increments, lightly frosted lens , 12” on center, UNV, ELV dimming, 8.8 W/Ft, Dense Pack LED Spacing, 2700K, Std UniBin, Light Gray C6 S Length in Feet1 0 0 Profile Type PLATFORM Series Platform C6 12 12 UNV PERFORMANCE Increment Optic/Lens/ Module Voltage Dimming Watts/Foot Length Diffuser Spacing 5 5 W/ft 12 12” UNV 120- E ELV S Serpentine 0 Rect. 0 Symm- 12 12” base 10 Lightly Electronic 277V frosted lens O.C. etric increment 88 8.8 W/ft Low Voltage 372 Half dome 102 10 W/ft (5%) lens + 10º x 60º optic 120 120V ET ELV and Triac 72 Half dome Dimmers lens + dim to asymmetric zero (0%) wall wash/ graze 73 Half dome lens + 35º optic 76 Half dome lens + 60º optic LIGHT CHARACTERISTICS LED Color Attribute Spacing Temp S2 Standard 27 2700K S Standard 30 3000K UniBin D Dense 35 3500K Pack 40 4000K C High CRI (90+) 2700K, 3000K, 3500K only Finish LG Light Gray BK Black WH White SPL Special Color Consult Factory NOTES: (1) Total ordered length may be specified in 1.0ft increments (EXAMPLE 24ft). Unless otherwise specified, Tempo will determine the section lengths of shipped product to comprise the total length, up to a maximum section length of 6ft (EXAMPLE: 30ft of ordered product may ship as (6) 5ft sections or (5) 6ft sections, etc.) (2) 10 W/ft and S Standard LED spacing available with (37) half dome lens + 10º x 60º optic only. SPEC_C6S-5_16_a Page 2 of 4 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com C6S SERPENTINE LED COVE LINEAR LIGHTING, HIGH LUMEN INTEGRAL POWER SYSTEM SYSTEM INTEGRATION ACCESSORIES SURGE SUPPRESSION DEVICE A Tempo furnished surge suppression device must be installed on each supplying branch circuit to comply with Tempo’s 5-year warranty terms SSD-120 120V Branch Circuit SSD-277 277V Branch Circuit POWER FEED CABLES Additional lengths available, contact factory PFC6-F-36 Female connector, 36 inches DIMMING INTERFACE MODULE (DIM) 450W max at 120V and 1000W max at 277V DIM-Z Dimming Interface Module converts 0-10V dimming signals to ELV Dimming output, 120 - 277 Universal Line Voltage. DIM-Z used with the ET driver limits dimming to 1%. JUMPER FEED CABLES Additional lengths available, contact factory JFC6-FM-12 Female/Male connector, 12 inches MOUNTING HARDWARE C6A-MC Surface Mount Clips, no finish (set of 12) MOUNTING HARDWARE SURFACE MOUNT CLIP (C6A-MC) 1.0 in [25 mm] 0.5 in [13 mm] 0.25 in [6 mm] 0.2 in [5 mm] 2.0 in [51 mm] SPEC_C6S-5_16_a Page 3 of 4 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com C6S SERPENTINE LED COVE LINEAR LIGHTING, HIGH LUMEN INTEGRAL POWER SYSTEM DIMENSIONAL INFORMATION C6S 2FT MODULE 2FT SECTION - LIGHTLY FROSTED LENS (10) C6S 2FT MODULE C6S 2FT MODULE 2.0 in 12.0 in 2.0 in [51 mm] 2.0 in [51 mm] 2.1inin 2.0 2.1 in 12.0 in 2.0 in [305 mm] 12.0 in [305 mm] 12.0 in [305 mm] [51 mm] [53mm] mm] [51 12.0 in [305 mm] [51 mm] 12.0 in [305 mm] [305 mm] 2.0 in [51 mm] 2.1 in [53 mm] [53 mm] C6S 2FT MODULE 2FT SECTION - HALF DOME LENS WITH 10°X60° (37), 60° (76), 35° 12.0(73) in C6S 2FT MODULE 2.0 in C6S 2FT MODULE [51 mm] 2.0 in [51 mm] 2.0 in [51 mm] 12.0 in [305 mm] 12.0 in [305 mm] 12.0 in [305 mm] 2.5 in 12.0 in [305 mm] [305 mm] [64 mm] 2.5 in in [642.1 mm] [53 mm] 2.1 in 12.0 in [305 mm] 2.5 in [64 mm] 2.1 in [53 mm] [53 mm] EXTENSION DETAIL ROTATION DETAIL EXTENSION DETAIL ROTATION DETAIL EXTENSION DETAIL EXTENSION DETAIL AVAILABLE EXTENSION 12.0 in [305 1.0mm] in AVAILABLE EXTENSION 12.0 in [305 mm] ROTATION DETAIL ROTATION DETAIL 1.0 in 12.0 in [305 mm] 1.0 in 180° 12.0 in AVAILABLE EXTENSION [305 mm] 12.0 in 12.0 in [305 mm] [305 mm] 90° ROTATION AVAILABLE IN EITHER DIRECTION 90° ROTATION 90° ROTATION AVAILABLE IN AVAILABLE INEITHER DIRECTION EITHER DIRECTION 180° 180° Tempo products and technologies are protected under one or more US and International patents. Tempo reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program. Please consult www.tempollc.com for the most up-to-date specifications and technical data. SPEC_C6S-5_16_a Page 4 of 4 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com