11000 and 12000 series
Professional toggle switches
Distinctive features
❑ Applications
These switches are specially manufactured for defence, avionics, space and
telecommunications applications.
A
❑ Approvals and lists
CECC 96201-005
CECC 96201-008
• QPL (in Europe) and MUAHAG listed
• meeting the requirements of MIL standard (MIL 3950)
❑ Robust switches for high specification environments
❑ Toggle action on 2-position models giving smooth mechanical
operation
❑ Plastic material with high insulation resistance
❑ Several front panel sealing options
❑ Several locking lever options (12000 series)
❑ Bright chrome, satin chrome or matt black finish
APEM
www.apem.com
A-63
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
Specifications
ELECTRICAL SPECIFICATIONS
A
• Max. current/voltage rating with resistive load :
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
Peak currents, refer to “Special options”.
Number of cycles
Contacts
Max. current/voltage rating
2 positions
3 positions
A
2A 250VAC - 4A 125VAC - 4A 30VDC
50.000
50.000
AD2
X780
2A 250VAC - 4A 125 VAC - 4A 30VDC
(Gold plating : 100mA 30VDC max.)
20.000
20.000
D
200mA 250VAC - 400mA 125VAC
80.000
50.000
150.000
100.000
Low level or mechanical life
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D : solid gold rivet
X910 : silver/nickel alloy (for
peak currents, see “Special
options”)
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin dipped terminals available,
see "Special options".
GENERAL SPECIFICATIONS
• Torque :1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 2,5 mm (.098) max.
• Operating temperature : -40°C to +85°C
RELIABILITY
- RUN-IN TEST
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
AGENCY APPROVALS/PREFERENTIAL LISTS
CECC 96201-005
CECC 96201-008
QPL (Europe only)
MUAHAG
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format. Preferential lists do not appear on the switches.
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Packaging unit : 25 pieces or 50 pieces depending on models.
A-64
www.apem.com
APEM
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
Overview
11
SERIES
Terminals and bushings
Number of poles
Solder lug or right
angle
Straight PC terminals
1
2
3
4
5
6
All models with Ø 6,35
(1/4) threaded bushing.
Single pole
Double pole
Three pole
Four pole
Electrical functions
6
9
7
8
Finish
A
AD2
D
Silver
Gold plated silver
(2 microns)
Solid gold rivet
See "Special options" for X780
(solid silver/nickel rivet) and
X910 (for peak currents).
OFF
OFF
OFF
ON
ON
MOM
MOM
Blank Solder lug or
straight PC
W
Right angle,
horizontal mounting
(function 6, SP only)
Levers
Blank Bright chrome finish
G
Matt black finish on
bushing, actuator
and hardware.
Contact materials
ON
ON
MOM
ON
Terminals
-13
-26
Approval
CECC
Standard
Cylindrical
Sealing
Blank Epoxy sealed terminals
standard
K
Front panel sealing by
one O-ring and sealing
washer
Availability : Consult
factory for details of
approved models.
Special options
Blank No special
requirement
X408 Front panel sealing
by two O-rings
Other : see following pages.
Sealing by two O-rings, see
X408, "Special options" box.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 2 hex nuts 8 (.314) across flats, 1 locking ring and 1
lockwasher. Standard and special hardware available are presented in section I.
APEM
www.apem.com
A-65
A
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
• Solder lug, straight PC or right angle terminals
• Epoxy sealed terminals standard
2
3
Function 6
1
2
9.50
(.374)
1.20
(.047)
3
2.50
(.098)
1.00
(.039)
Other functions
MODEL
STRUCTURE
Shown with standard lever (-13)
➞ Keyway
11.30 6.30
(.444) (.248)
III
III
ON
ON
ON OFF ON
MOM OFF MOM
ON OFF MOM
0.70
(.027)
Ø3.00
(.118 DIA)
11136
11139
11137
11138
I
14.00
(.551)
II 26˚
1
Ø6.35-40UNS
(1/4-40UNS)
2.50
(.098)
3
2
8.00
(.314)
13.40
(.527)
4.00
(.157)
II
1 2 3
I
0.50
(.019)
Solder lug terminals - single pole
5.00
(.196)
EPOXY
➞ Keyway
11.30 6.30
(.444) (.248)
III
II 26˚
III
ON
ON
ON OFF ON
MOM OFF MOM
ON OFF MOM
14.00
(.551)
6
0.70
(.027)
Ø6.35-40UNS
(1/4-40UNS)
5.00
(.196)
6.00
(.236)
3
I
14.00
(.551)
2.50
(.098)
4
5
13.40
(.527)
4.00
(.157)
1
2
Ø3.00
(.118 DIA)
11146
11149
11147
11148
II
3 2 1
I
0.50
(.019)
Solder lug terminals - double pole
EPOXY
➞ Keyway
Solder lug terminals - three pole
A-66
20.00
(.787)
III
III
4.30
(.169)
www.apem.com
14.00
(.551)
II 20˚
Ø6.35-40UNS
(1/4-40UNS)
5.00
(.196)
6.00
(.236)
9
4.00
(.157)
6
I
3 2 1
7
8
2.50
(.098)
ON
ON
ON OFF ON
MOM OFF MOM
ON OFF MOM
4
5
Ø12.00
(.472 DIA)
11156
11159
11157
11158
II
17.00
(.669)
0.50
(.019)
I
11.30 5.70
(.444) (.224)
Ø3.00
(.118 DIA)
A
1
5.00
(.196)
1.70
(.066)
➞ Keyway
EPOXY
APEM
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
➞ Keyway
Solder lug terminals - four pole
III
4.30
(.169)
A
Ø6.35-40UNS
(1/4-40UNS)
Ø12.00
(.472 DIA)
➞ Keyway
11.30 6.30
(.444) (.248)
III
14.00
(.551)
4.00
(.157)
0.70
(.027)
ON
Ø3.00
(.118 DIA)
-
III
0.50
(.019)
II 26˚
1
ON
8.00
(.314)
13.40
(.527)
I
3
2
Ø6.35-40UNS
(1/4-40UNS)
Ø1.60
(.062 DIA)
4.00
(.157)
9.50
(.374)
➞ Keyway
II 26˚
III
0.70
(.027)
ON
14.00
(.551)
6
Ø6.35-40UNS
(1/4-40UNS)
9.50
(.374)
7
8
6
9
I
II 20˚
III
4.30
(.169)
-
ON
Ø6.35-40UNS
(1/4-40UNS)
Ø12.00
(.472 DIA)
APEM
www.apem.com
Ø1.60
(.062 DIA)
1.00
(.039)
ON
Ø3.00
(.118 DIA)
11256
14.00
(.551)
4
5
20.00
(.787)
17.00
(.669)
6.00
(.236)
III
EPOXY
4.00
(.157)
II
4.00
(.157)
3 2 1
II
11.30 5.70
(.444) (.224)
0.50
(.019)
➞ Keyway
Straight PC terminals - three pole ▲
Ø1.60
(.062 DIA)
6.00
(.236)
3
I
6.00
(.236)
4
5
14.00
(.551)
4.00
(.157)
1
2
13.40
(.527)
0.50
(.019)
-
11.30 6.30
(.444) (.248)
III
Ø3.00
(.118 DIA)
ON
II
1.00
(.039)
II
3 2 1
Straight PC terminals - double pole ▲
11246
EPOXY
6.00
(.236)
11236
EPOXY
1.00
(.039)
II
5.00
(.196)
1 2 3
Straight PC terminals - single pole ▲
14.00
(.551)
II 20˚
6.00
(.236)
12
4.00
(.157)
9
I
2.50
(.098)
10
11
3 2 1
7
8
ON
ON
ON OFF ON
MOM OFF MOM
ON OFF MOM
II
26.00
(1.023)
III
Ø3.00
(.118 DIA)
11166
11169
11167
11168
II
17.00
(.669)
0.50
(.019)
II
11.30 5.70
(.444) (.224)
9.50
(.374)
4.00
(.157)
EPOXY
A-67
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
➞ Keyway
10
11
9
12
I
II 20˚
III
14.00
(.551)
7
8
ON
Ø6.35-40UNS
(1/4-40UNS)
Ø1.60
(.062 DIA)
Ø12.00
(.472 DIA)
6.00
(.236)
-
Ø3.00
(.118 DIA)
ON
11266
A
1.00
(.039)
4.30
(.169)
6.00
(.236)
III
26.00
(1.023)
4.00
(.157)
II
17.00
(.669)
0.50
(.019)
II
11.30 5.70
(.444) (.224)
3 2 1
Straight PC terminals - four pole ▲
5.00
(.196)
14.00
(.551)
3
1.10
(.043)
ON
1.30
(.051)
III
Ø1.60
(.062 DIA)
5.08
(.200)
EPOXY
0.40
(.015)
10.60
(.417)
1.00
(.039)
9.27
(.364)
9.27
(.364)
Ø6.35-40UNS
(1/4-40UNS)
4.00
(.157)
Ø3.00
(.118 DIA)
-
II 26˚
4.40
(.173)
ON
I
8.00
(.314)
4.00
(.157)
III
3
2
1
11136W
13.80
(.543)
2
II
EPOXY
1
I
11.30 5.90
(.444) (.232)
4.00
(.157)
0.50
(.019)
➞ Keyway
Right angle terminals - horizontal - single pole
9.50
(.374)
4.00
(.157)
▲ Models with straight PC terminals are also available with 3,5 mm (.138) short terminals, functions 6, 9, 7 and 8. On request.
PANEL CUT-OUT
5.20
(.204)
Standard
A-68
Ø2.20
(.086 DIA)
Ø6.50
(.255 DIA)
Ø6.50
(.255 DIA)
2.70
(.106)
1.10
(.043)
Ø6.50
(.255 DIA)
With K
sealing option
2.70
(.106)
With X408
sealing option
www.apem.com
APEM
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
CONTACT MATERIALS
A
AD2
D
Silver
Gold plated silver (2 micron gold)
Solid gold rivet
A
See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents).
FINISH
Blank
G
Bright chrome finish
Matt black finish on bushing, lever and hardware.
Other finish, consult factory.
SEALING
2
2.30
(.090)
Ø10.60
(.417 DIA)
Ø11.80
(.464 DIA)
5.80
(.228)
Ø6.40
(.251 DIA)
Not available on 11000W model.
1
1.5Maxi
(.104 MAX)
Epoxy sealed terminals are standard.
Blank
No sealing except standard
K
Front panel sealing by O-ring and sealing washer. Protects the switch
against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
➀ O-ring ➁ Sealing washer
Sealing by two O-rings, see X408 under "Special options".
Sealing boots : see section H.
LEVERS
-13
Standard
APEM
9.00
(.354)
7.00
(.275)
Ø2.00
(.078 DIA)
11.30
(.444)
7.00
(.275)
Ø3.00
(.118 DIA)
-26
Cylindrical
www.apem.com
A-69
11000 series
Professional toggle switches - threaded bushing Ø 6,35 (1/4)
SPECIAL OPTIONS
X408
Front panel sealing by two O-rings. Flatted bushing for precise
orientation.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
1
5.50
(.216)
Tin dipped terminals
For PC terminal models with gold plated contacts only.
4.00 Maxi
(.157 MAX)
A
F
Not available on 11000W model.
X408
X780
Solid rivet, gold plated silver/nickel alloy
X910
Switches for peak currents
➞ Flat
➀ O-rings
Peak current up to 80A (1 ms) 60VDC - single/double pole
Single pole
11136 X910
ON
-
ON
Double pole
11146 X910
ON
-
ON
• Contacts : solid rivet - silver/nickel alloy (AgNi)
• Max. current/voltage rating :
3/80A (1 ms) 60VDC - 10.000 cycles
2/30A 250VAC - 10.000 cycles
• Further specifications and dimensions : see previous pages
• General information on peak currents : see end of catalogue.
AGENCY APPROVALS
CECC
CECC 96201-005 (high level - contacts X780)
CECC 96201-008 (low level - contacts AD2 or D)
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC , complete above box with ”CECC”.
Blank : no agency approval required.
Preferential lists : see specifications.
A-70
www.apem.com
APEM
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Specifications
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
Peak currents, refer to “Special options”.
A
Number of cycles
Contacts
Max. current/voltage rating
2 positions
3 positions
A
2A 250VAC - 4A 125VAC - 4A 30VDC
50.000
50.000
AD2
X780
2A 250VAC - 4A 125 VAC - 4A 30VDC
(Gold plating : 100mA 30VDC max.)
20.000
20.000
D
200mA 250VAC - 400mA 125VAC
80.000
50.000
150.000
100.000
Low level or mechanical life
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D : solid gold rivet
X910 : silver/nickel alloy (for
peak currents, see “Special
options”)
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin dipped terminals available,
see "Special options".
GENERAL SPECIFICATIONS
• Torque :1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 4,5 mm (.177) max.
• Operating temperature : -40°C to +85°C
RELIABILITY
- RUN-IN TEST
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
AGENCY APPROVALS/PREFERENTIAL LISTS
CECC 96201-005
CECC 96201-008
QPL (Europe only)
MUAHAG
Designed to MIL specifications
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format. Preferential lists do not appear on the switches.
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Packaging unit : 2 pole models : 25 pieces - 3 & 4 pole models : 20 pieces.
APEM
www.apem.com
A-71
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Overview
12
Terminals and bushings
SERIES
1
2
A
Solder lug terminals
Straight PC terminals
All models with threaded
bushing Ø 11,9 (15/32).
Bushing Ø 15 (.590), see
X822 under "Special
options".
Number of poles
4
5
6
Momentary for
function 4
Electrical functions
Double pole
Three pole
Four pole
6
9
7
8
5
ON
ON
MOM
ON
-
OFF
OFF
OFF
ON
ON
ON
MOM
MOM
MOM
4
ON
ON
ON
ON
ON MOM ▲
MOM ON MOM ▲
1R ON ON MOM
2R MOM ON MOM
Leave blank for other
functions.
Function 4
. ▲ Must not have blank
in "momentary" box.
Finish
Fluorescent tip
Blank Bright chrome finish
G
Matt black finish on
bushing, actuator and
hardware.
Blank None
0.38 White fluorescent
tip to lever
A
AD2
D
Silver
Silver, gold plated
(2 micron gold))
Solid gold rivet
See "Special options" for
X780 (solid silver/nickel
rivet) and X910 (for peak
currents).
Blank No special
requirement
X408 Front panel sealing
by two O-rings
X822 Bushing Ø 15 (.590)
Available with matt black
finish (G) only.
Satin chrome finish, see
"Special options".
Contact materials
Special options
Other : see foll. pages.
Sealing
Blank Epoxy sealed
terminals standard
K
Front panel sealing by
one O-ring and
sealing washer
Sealing by two O-rings, see
X408, "Special options"
box.
Levers
Standard lever
Short lever
-13
-12
Locking levers
Approvals
CECC
Availability :
Consult factory for details
of approved models.
-1V 1 locked position
-2V 2 locked positions
-3V 3 locked positions
Other, consult factory.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 2 hex nuts 14 (.551) across flats and 1 locking ring.
Standard and special hardware available are presented in section I.
Security caps are available to prevent inadvertent lever operation. They are presented in section I.
A-72
www.apem.com
APEM
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Solder lug terminals : 12100
• Epoxy sealed terminals standard
2
3
Function 6
1
2
1.20
(.047)
3
9.50
(.374)
1
5.00
(.196)
1.70
(.066)
➞ Keyway
2.50
(.098)
1.00
(.039)
A
Other functions
MODEL
STRUCTURE
Shown with standard lever (-13)
➞ Keyway
14.00
(.551)
II 28˚
III
1.00
(.039)
Ø18.20
(.716 DIA)
5.00
(.196)
6.00
(.236)
ON
ON
MOM
MOM
ON
MOM
MOM
MOM
1
6
2
3
I
3
4
5
2.50
(.098)
OFF
OFF
OFF
ON
ON
ON
ON
1
2
13.70
(.539)
4.00
(.157)
ON
ON
MOM
ON
ON
ON
MOM
-
III
10.90
(.429)
0.50
(.019)
12146
12149
12147
12148
12144*
12144 1R*
12144 2R*
12145
II
Ø11.90-32UNS
(15/32-32UNS)
I
17.30
(.681)
Ø6.00
(.236 DIA)
Solder lug terminals - double pole
EPOXY
* Function 4 : SP in DP case - connections, see end of catalogue.
➞ Keyway
Solder lug terminals - three pole
17.30
(.681)
I
6.00
(.236)
26.00
(1.023)
14.00
(.551)
II 28˚
5.00
(.196)
Ø18.20
(.716 DIA)
6.00
(.236)
III
Ø6.00
(.236 DIA)
ON
ON
MOM
MOM
ON
MOM
MOM
Ø11.90-32UNS
(15/32-32UNS)
OFF
OFF
OFF
ON
ON
ON
13.70
(.539)
2.50
(.098)
12
10.90
(.429)
EPOXY
4.00
(.157)
9
17.30
(.681)
0.50
(.019)
10
11
5.00
(.196)
Ø18.20
(.716 DIA)
1
7
8
2.50
(.098)
1.00
(.039)
4.00
(.157)
III
2
III
14.00
(.551)
II 28˚
3
II
1
9
2
6
I
1.00
(.039)
ON
ON
MOM
ON
ON
ON
MOM
20.00
(.787)
3
7
8
➞ Keyway
Solder lug terminals - four pole
12166
12169
12167
12168
12164*
12164 1R*
12164 2R*
13.70
(.539)
0.50
(.019)
4
5
ON
ON
ON OFF ON
MOM OFF MOM
ON OFF MOM
I
10.90
(.429)
III
Ø11.90-32UNS
(15/32-32UNS)
12156
12159
12157
12158
II
Ø6.00
(.236 DIA)
I
EPOXY
* Function 4 : DP in 4P case - connections, see end of catalogue.
APEM
www.apem.com
A-73
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
Straight PC terminals : 12200
II 28˚
14.00
(.551)
6
III
ON
1.00
(.039)
ON
7
8
6
9
I
20.00
(.787)
II 28˚
14.00
(.551)
4
5
13.70
(.539)
III
ON
1.00
(.039)
Ø18.20
(.716 DIA)
Ø1.60
(.062 DIA)
9
12
I
II 28˚
III
ON
6.00
(.236)
14.00
(.551)
10
11
26.00
(1.023)
2 1
7
8
13.70
(.539)
1.00
(.039)
Ø18.20
(.716 DIA)
6.00
(.236)
Ø1.60
(.062 DIA)
6.00
(.236)
Ø6.00
(.236 DIA)
Ø11.90-32UNS
(15/32-32UNS)
1.00
(.039)
-
III
10.90
(.429)
4.00
(.157)
ON
12266
II
17.30
(.681)
4.00
(.157)
EPOXY
3
I
9.50
(.374)
0.50
(.019)
➞ Keyway
Straight PC terminals - four pole ▲
6.00
(.236)
Ø6.00
(.236 DIA)
Ø11.90-32UNS
(15/32-32UNS)
1.00
(.039)
-
III
10.90
(.429)
4.00
(.157)
EPOXY
2 1
II
17.30
(.681)
Ø1.60
(.062 DIA)
3
I
9.50
(.374)
0.50
(.019)
➞ Keyway
Straight PC terminals - three pole ▲
12256
Ø6.00
(.236 DIA)
Ø11.90-32UNS
(15/32-32UNS)
1.00
(.039)
A
Ø18.20
(.716 DIA)
6.00
(.236)
3
I
4.00
(.157)
4
5
2 1
1
2
6.00
(.236)
-
III
13.70
(.539)
4.00
(.157)
ON
12246
II
10.90
(.429)
3
I
17.30
(.681)
0.50
(.019)
➞ Keyway
Straight PC terminals - double pole ▲
9.50
(.374)
EPOXY
4.00
(.157)
▲ Models with straight PC terminals are also available with 3,5 mm (.138) short
terminals, functions 6, 9, 7 and 8. On request.
PANEL CUT-OUT
Ø3.50
(.137 DIA)
Ø12.00
(.472 DIA)
Ø12.00
(.472 DIA)
1.70
(.066)
Ø12.50
(.492 DIA)
9.60
(.377)
Standard
A-74
5.10
(.200)
5.10
(.200)
With K
sealing option
With X408
sealing option
www.apem.com
APEM
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
CONTACT MATERIALS
A
AD2
D
Silver
Silver, gold plated (2 micron gold)
Solid gold rivet (except functions 4 and 5)
A
See "Special options" for contacts X780 (solid silver/nickel rivet) and contacts X910 (for peak currents).
FINISH
Blank
G
Bright chrome finish
Matt black finish on bushing, lever and hardware.
For satin chrome finish, see "Special options".
Epoxy sealed terminals are standard.
Blank
No sealing except standard.
K
Front panel sealing by one O-ring and sealing washer.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even
when switch is operated.
Sealing by two O-rings, see X408 under "Special options".
Sealing boots : see section H.
2
➀ O-ring
1
3.00
(.118)
4 Maxi
(.157 max)
SEALING
2
1
➁ Sealing washer
FLUORESCENT TIP
Standard lever
Blank
None
0.38
White fluorescent tip.
Becomes luminous when submitted to ultra-violet rays.
Locking lever
Available with matt black finish (option G) only.
APEM
www.apem.com
A-75
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
ACTUATORS
Dash compulsory before lever code.
Levers
A
Ø6.00
(.236 DIA)
Security caps : see section I.
11.90
(.468)
11.90
(.468)
11.80
(.464)
17.30
(.681)
Ø5.00
(.196 DIA)
-13
Standard
-12
Short lever
Locking levers
➞ Keyway
Ø7.00
(.275)
11.90
(.468)
11.90
(.468)
11.90
(.468)
19.40
(.763)
19.40
(.763)
20.60
(.811)
Ø
(.2757.00
DIA)
Ø
(.2757.00
DIA)
-1V
-2V
-3V
1 locked position (function 6)
2 locked positions (function 6)
3 locked positions (functions 9 and 4)
Consult factory for other locking lever options.
SPECIAL OPTIONS
No special requirement.
F
Tin dipped terminals
For PC terminal models with gold plated contacts only.
X408
Front panel sealing by two O-rings. Flatted bushing for precise
orientation. Panel thickness : 8 mm (.314) max., 3 mm (.118) min.
Protects the switch against water and dust.
Panel seal withstands 1 bar pressure and remains sealed even when
switch is operated.
X545
Lever, bushing, housing, nuts and washers with satin chrome finish.
A-76
www.apem.com
1
10.40
(.409)
Blank
➞ Flat
➀ O-rings
APEM
12000 series
Professional toggle switches - threaded bushing ø 11.9 (15/32)
SPECIAL OPTIONS
(continued)
Ø15 X 100 SI
(.590 DIA X 100 IS)
Threaded bushing Ø 15 (.590), with double flat
Not available with function 5 or locking levers.
Includes front panel sealing and X780 contact material.
10.40
(.409)
X822
12.70
(.500)
1
6.5 Maxi
(.255 Max)
Solid rivet - gold plated silver/nickel alloy contacts
Not available with function 5.
X822
➞ Flat
➀ O-rings
X910
Ø15.20
(.598 DIA)
13.00
(.511)
X780
A
Switches for peak currents
Peak current up to 80A (1 ms) 60VDC - double pole
12146 X910
ON
-
ON
• Contacts : solid rivet - silver/nickel alloy (AgNi)
• Max. current/voltage rating :
3/80A (1 ms) 60VDC - 10.000 cycles
2/30A 250VAC - 10.000 cycles
• Further specifications and dimensions : see previous pages
• General information on peak currents : see end of catalogue.
AGENCY APPROVAL
CECC
CECC 96201-005 (high level - contacts X780)
CECC 96201-008 (low level - contacts AD2 or D)
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete above box with ”CECC”.
Blank : no agency approval required.
Preferential lists : see specifications.
APEM
www.apem.com
A-77