Eaton
Standby Generator Accessories
Model 5630CH
Model 5631CH
Model 5632CH
Model 5633CH
Battery Warmer
Model 5634CH
Model 5635CH
Model 5629CH
Cold Weather Kits
The kit consists of a battery warmer that has a thermostat built into
the battery wrap. When temperatures fall below an acceptable level,
the thermostat activates the battery warmer maintaining optimum
battery temperature for the best generator starting. These kits
are recommended for generators installed in regions where the
temperature regularly falls below 10 degrees.
When installing the kit, it is required that the oil is replaced with
5W-30 synthetic for better engine start capability.
Models
5629CH*
1.6L 25/30kW
5630CH*
2.4L 22/27/36/45/60kW
5631CH*
4.2L 48kW
5632CH*
4.6L and 6.8L 80/150kW
5633CH*
6.8L 70/100/130kW
5634CH
This kit is intended for use with the 8kW air cooled product.
The connection is a 120V plug that will require a voltage
source.
5635CH
This kit is intended for use with air-cooled product that utilizes
the digital controller (10-20kW). The connections consist of 2
ring terminals that are attached to the appropriate neutral and
ground and a bare lead that is inserted into the AC connection
block that is connected inside the generator control panel.
*Kits include an oil filter for conversion over to 5W-30 synthetic oil.
http://generators.eaton.com
Eaton Corporation
Electrical Sector
1111 Superior Ave.
Cleveland, OH 44114
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2010 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. PA00405009E
January 2010