High Speed
Connectors
Outline
HSA series
Connectors for interfacing to storage devices
(Conforms to Serial ATA Standard)
This series of connectors for high-speed transmission conform to Serial
ATA (SATA) standard, which are successors to the parallel type ATA
connector. Currently, as memory capacity of hard disks increases, highspeed interfacing is required. To respond to that need, serial transmission
has been used. Compared with a parallel ATA connector, the serial ATA
connector further contributes to the improvement of thermal design and
the implementation of small-sized systems, because cable wiring and
mounting become simpler with use thin flexible cable and the small-sized
connector with few pins. Further, wiring on the motherboard can be more
easily and flexibly routed.
Features
• Conforms to Serial ATA standard (Rev 1.0)
• Transmission speed: 1.5 or 3.0 Gigabits per second
• Excellent transmission characteristics are obtained by utilizing
electromagnetic field simulator.
• Characteristic impedance is matched.
• Low crosstalk
• Low insertion loss
• Low reflection attenuation
Principal
Applications
HDD (Hard Disk Drives), storage equipment, servers, PCs, etc.
Electrical
Characteristics
Rated voltage
100V AC (r.m.s.)
Rated current
1.5 A/terminal
Temperature range
-20 to +85 ˚C
Humidity
95% RH, or less
Characteristic impedance
(differential)
100 ohms±15 %
Cross talk (differential)
Up to 5% (near end)
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
Example
HSAS-SP29SMYG+
HDD
HSA-SP22LMYG
HSA-SP22SFYG
HSAS-SP29SFPHG+
HSAS-SP29SFPG+
Reflow temperature profile (for reference purposes)
250˚C±5˚C Max.
300
Soldering
Solder Temperature (˚C)
250
220˚C
30sec
200
150
ΩApplicable products
HSA-SP22LMYG
HSA-SP22SFYG
HSA-SP22SFYAG
HSA-S7LMYG
HSA-SP34LMYZAG
Residual heat
100
50
1~2min
The reflow temperature profile shown in this
drawing is for reference purposes. This profile
depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus,
this profile may not meet with your specific
situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature
profile.
5sec
2min or more
The profile shown in this drawing is applicable only for
those products shown above.
Product List
Right-angle SMT type
male connector
HSA-SP22LMYG
J-50HSA
HSA series...4
Straight through hole type
female connector
(Extended type)
HSA-SP22SFDHG
J-54HSA
HSA series...8
Straight SMT type
female connector
(Standard type)
HSA-SP22SFYG
J-51HSA
HSA series...5
Straight SMT type
female connector
(Standard type)
HSA-SP22SFYAG
J-52HSA
HSA series...6
Right-angle SMT type
male connector
HSA-SP34LMYZAG
Straight through hole type
female connector
(Standard type)
HSA-SP22SFDG
J-56HSA
HSA series...10
J-55HSA
HSA series...9
Right-angle SMT type
male connector
HSA-S7LMYG
J-53HSA
HSA series...7
For high-speed transmission
For PCB
Right-angle SMT type male connector
HSA-SP22LMYG
Right-angle SMT
Serial ATA standard
● Configuration of product Part No.
HSA- SP 22 LMY G
➁
➀
➂
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Right-angle SMT type, female
➄ Contact plating
G: Gold plate
4.4
1.75
17.78
1.27
™
¡
1.23
1.1
7.62
1.27
4
49
45
HONDA
10.4
£
JAPAN
A
8.9
B'
B
1.905
41.13
3.9
0.8
A'
POS.#P15
2-ø1
0.35
8.255
5.08
2.41
1.15
4.9
POS.#S1
POS.#S7
POS.#P1
0.35MIN.
A-A' cross section
33.39
45˚
2.75
2
1.5
0.4
1.95
B-B' cross section
41.5
12.065±0.05
6.985±0.05
0.6±0.05
3.2+0.1
0
2-ø1.2+0.1
0 (T.H)
2±0.05
0.7±0.05
8.9±0.05
4.25±0.05
5.1±0.1
46.4±0.05
41.5±0.05
1.27±0.05
7.62±0.05
Ω Components
¡ Insulator
1.27±0.05
17.78±0.05
Edge of PCB
Recommended PCB layout
™ Contacts
£ Hold down
Mating connector: HSA-SP22SFYG, HSA-SP22SFYAG, HSA-SP22SFDHG, HSA-SP22SFDG
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
For high-speed transmission
For PCB
Straight SMT type female connector (Standard type)
HSA-SP22SFYG
Straight SMT
Serial ATA standard
● Configuration of product Part No.
HSA- SP 22 SFY G
➀
➁
➂
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Straight SMT type, female
➄ Contact plating
G: Gold plate
£
38.05
40.43
36.19
17.78
1.27
1.905
2.4
5
3.5
0.6
2.11
0.4
12.065±0.05
±0.05
ø1.2+0.1
0 (T.H)
1.27±0.05
3.6±0.05
1.43±0.05
1.9
1.15
A'
6.985±0.05
Ω Components
POS.#S7
POS.#S1
A
36.5
17.78
A-A' cross section
1.45
7.62
5.08
8.255
33.69
0.3
1.4 (POS.#P4&P12 ONLY)
1.9
1.95
0.5
POS.#P1
POS.#P15
8.15
5.5
1.7
2.4
1.4
0.35
ø1
1.2
™ ¡
1.4
5.08
2.11
7.62±0.05
0.6±0.05
5.08±0.05
±0.05
39.03
Recommended PCB layout
Board thickness: t =1.6mm
2-ø1.5±0.05 (P.T.H)
2-ø2.1±0.1 (PAD)
¡ Insulator
™ Contacts
£ Lock pin
Mating connector: HSA-SP22LMYG
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
For high-speed transmission
For PCB
Straight SMT type female connector (Standard type)
HSA-SP22SFYAG
Straight SMT
Serial ATA standard
● Configuration of product Part No.
HSA- SP 22 SFYA G
➀
➁ ➂
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Straight SMT type, female
➄ Contact plating
G: Gold plate
42.73
™
5.08
2.11
0.3
1.95
38.05
40.43
1.2
2.4
35
0.
C
0.5
8.15
5.5
1.4
0.35
1.7
¡
1.4 (POS.#P4&P12 ONLY)
36.19
POS.#P1
1.9
POS.#S7
7.62
1.45
17.78
1.27
POS.#P15
A-A' cross section
POS.#S1
1.3 MAX.
2.3
5.28
A'
2.11
5.08
1.905
3.5
0.6
A
8.255
33.69
0.35
38.33±0.1
3.5±0.05
38.33±0.05
Ω Components
2-ø1.5±0.05 (P.T.H)
Recommended PCB layout
¡ Insulator
Board thickness: t =1.6mm
™ Contacts
£ Lock pin
Mating connector: HSA-SP22LMYG
Through
hole
SMT
Press-in
IDC
4.1±0.05
7.62±0.05
1.05±0.05
3.6±0.05
12.065±0.05
0.6±0.05
3.6±0.05
2.13±0.05
6.985±0.05
17.78±0.05
1.27±0.05
Wire
Soldering Crimping wrapping
Others
2.13
£
For high-speed transmission
For PCB
Right-angle SMT type male connector
HSA-S7LMYG
Right-angle SMT
Serial ATA standard
● Configuration of product Part No.
HSA- S 7 LMY G
➀
➁ ➂
➃
➄
➀ Series name
➁ For signals
➂ No. of contacts: 7
➃ Right-angle SMT type, male
➄ Contact plating
G: Gold plate
0.4
5.4
1.95
11.56
Lot No. is marked on the surface.
2
10.41
17.27 REF.
2.4
1.9
0.84
POS.#S1
0.35MIN.
POS.#S7
B'
A'
12.74
8.4
£
™
1.23
1.27
7.62
4
0.3
3.37
1.1
2.63
B
0.35
45˚
A
¡
4.75
(POS.#S1, S4 and S7)
Edge of PCB
0.9±0.05
2.2±0.05
A-A' cross section
4.25
(POS.#S2, S3, S5 and S6)
1.5
B-B' cross section
8.4±0.05
1.27±0.05
3±0.1
2±0.05
2.36±0.05
7.62±0.05
2-ø1.5+0.05 (P.T.H)
12.74±0.05
Ω Components
¡ Insulator
™ Contacts
Recommended PCB layout
Board thickness: t =1.6mm
£ Hold down
Mating connector: Conforms to Serial ATA standard 7 contacts female connector
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
For high-speed transmission
For PCB
Straight through hole type female connector
(Extended type)
HSA-SP22SFDHG
Straight Through hole
Serial ATA standard
● Configuration of product Part No.
HSA- SP 22 SFDH G
➀
➁ ➂
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Straight through hole type, high profile, female
➄ Contact plating
G: Gold plate
0.4
3.5
34.34
œ0.64
¡
™
35
1.27≈(15-1)=17.78
0.
38.05
40.43
36.19
2.11
5.08
C
0.5
5.2
2.4
1.4
1.15
£
1.4 (POS.#P4&P12 ONLY)
1.9
A-A' cross section
POS.#P1
1.45
1.27
POS.#S7
1.27≈(7-1)=7.62
1.27
1.7
14.15
3.2
6
A'
8.255
33.69
POS.#S1
HSA-SP
34.34±0.05
31.75 REF.
17.78±0.05
1.27±0.05
1.9±0.05
22-ø0.8±0.05 (P.T.H)
7.62±0.05
1.27±0.05
4-ø1±0.05 (P.T.H)
6.985±0.05
12.065±0.05
Ω Components
¡ Insulator
Recommended PCB layout
™ Contacts
Board thickness: t =2.4mm
£ Lock pin
Mating connector: HSA-SP22LMYG
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
1
6
1.9
1.905
3.5
0.6
POS.#P15
1.9
5
A
For high-speed transmission
For PCB
Right-angle SMT type male connector
HSA-SP34LMYZAG
Right-angle SMT
Serial ATA standard
● Configuration of product Part No.
HSA- SP 34 LMY ZA G
➀
➁
➂
➃
➄ §
➀ Series name
➁ For signals and power supply
➂ No. of contacts
➃ Right-angle SMT type, male
➄ Composite jumper (pin header) type
§ Contact plating
G: Gold plate
4.4 (See table #1)
1.75
3.17
1.23
1.1
96.1
82
45.5
3
11
1
£
7.62
0.3
™
17.78
1.27
0.4
1.27
A-A' cross section 2.6 2.8
¡
POS.#S7
0.35
41.13
B'
ø1.2
B
A
12.07
POS.#1
6.99
1.6
œ0.5
C
4
B-B' cross section
1.9
POS.#11
3.5
4.25
4.12
5.4
1.95
8.8
A'
13.7
7.4
1.2
2
C'
1.905
1.15
3.2
8.255
5.08
2.41
12
POS.#2
POS.#12
24
POS.#P15
3.5
5
2
33.39
1.5
POS.#P1
POS.#S1
1.58
0.5
0.84
20.68
15.5
4.9
1
2
0.35MIN.
3.9 (See table #1)
5.78
2
7.05 7.62
3-ø1.5±0.05 (P.T.H)
±0.1
3-ø2.5
6.985±0.05
±0.05
7.62
82
1.27±0.05
17.78±0.05
CONTACT POS. NO.
2.6±0.05
3.2-0.1
1.27±0.05
POS.#1
POS.#2
Ω Table 1
0.6±0.05
2±0.05
1.9-0.1
0
POS.#12
POS.#11
1
C-C' cross section
12.065±0.05
0
2.5±0.05
1.1±0.05
0.6
±0.05
3.5
20.68±0.05
.4
±0.05
15.5±0.05
11±0.1
4-R0
2.8±0.05
2-ø1.4±0.05 (T.H)
S2, S3, S5, S6, P1, P2, P8, P9, P11, P14, P15
4.4
S1, S4, S7, P3~P7, P10, P12, P13
Ω Components
±0.05
36
45.5±0.05
¡ Insulator
±0.05
™ Contact A
Edge of PCB
(Land)
LENGTH
3.9
£ Contact B
Recommended PCB layout
Board thickness: t =1.2mm
¢ Lock pin
Mating connector: HSA-SP22SFYG, HSA-SP22SFDHG
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
For high-speed transmission
For PCB
Straight through hole type female connector
(Standard type)
HSA-SP22SFDG
Straight Through hole
Serial ATA standard
● Configuration of product Part No.
HSA- SP 22 SFD G
➀
➁
➂
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Straight through hole type, female
➄ Contact plating
G: Gold plate
5.08
1.4
0.35
0.5
38.05
40.43
1.4 (POS.#P4&P12 ONLY)
1.9
36.19
POS.#P1
POS.#P15
17.78
1.27
1.905
2.4
¡
POS.#S7
POS.#S1
1.45
7.62
1.7
1.27
5
3.5
1.9
0.6
A'
2.11
1.15
A-A' cross section
2.4
A
5.08
8.255
33.69
0.35
36.5
39.03
12.065±0.05
6.985±0.05
17.78±0.05
7.62±0.05
1.27±0.05
1.05±0.05
ø1.2+0.1
0 (T.H)
5.08±0.05
39.03±0.15
Ω Components
¡ Insulator
2-ø1.5±0.05 (P.T.H)
2-ø2.1±0.1 (Land)
22-ø0.6±0.05 (P.T.H)
Recommended PCB layout
Board thickness: t =1.6mm
™ Contacts
£ Lock pin
Mating connector: HSA-SP22LMYG
Through
hole
SMT
Press-in
IDC
1.15
£
8.15
5.5
Wire
Soldering Crimping wrapping
Others
1.05
™
1.4
2.11
ø1
Connector for high-speed transmission
Right-angle SMT type female connector for PCBs
HAS-SP22LFYG1
For PCBs
Right-angle SMT
Conforms to Serial ATA standard
● Configuration of product Part No.
HAS- SP 22 LFY G1
➀
➂
➁
➃
➄
➀ Series name
➁ For signals and power supply
➂ No. of contacts: 22
➃ Form of contact
LFY: Right-angle, SMT type, female
➄ Plating of contact and SMT section
G1: Gold plate
0.4
1.75
1.25(Pos.#P4 & P12 ONLY)
2.4
1.4
™ ¡
1.15
5.5
C0.35
0.5
1.4(Pos.#P4 & P12 ONLY)
38.05
1.9
40.43
Pos.#P1
36.19
7.58
1.5
33.69
5.08
A-A' cross section
2.11
1.27
Pos.#S1
5.5
A'
12
Ø1.5
0.3
2
L
C
1.9
Pos.#P15
6.74
4
3.5
A
0.6
1.27
£
1.7
Pos.#S7
4.99
7.62
17.78
33.19
37.42
37.42±0.05
12.065±0.05
6.985±0.05
7.62±0.05
17.78±0.05
1.27±0.05
3
0.9±0.05
33.19±0.05
±0.05
1±0.05
0.9±0.05
2.5±0.05
2.08±0.05
(P.T.H.)
2.88 (Rand)
R0.5±0.03
(P.T.H.)
0.76±0.03
R0.9 (Land)
2.08±0.05
2.4±0.05
Ø1.6±0.03
1.8
● Components
➀ Insulator
➁ Contact
Edge of PCB
Recommended PCB layout
PCB thinckness: 1.2 mm
➂ Lock pin
Mating case: HSA-SP22LMYG
Dip
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
HSA series