port LED INDOOR/OUTDOOR

advertisement
port LED
INDOOR/OUTDOOR
Uplight with Hexcell Louver
Step Light with Micro Louver Steplight Kit
#PORT-LL
Silicone Ring Seal
3.5"
(8.9cm)
J-Box
Cover Included
2.25"
(5.7cm)
0.13"
(.33cm)
4"
(10.2cm)
1.5"
(3.8cm)
4.3"
(11cm)
Wet location Round Junction Box
Supplied by Electrician
Wet Location Junction Box
Supplied by Electrician
136
www.edgelighting.com
OR
Indoor Octagon Junction
Box Supplied by Electrician
Add Accessory Port-LL Micro
lens & louver to bend light 20°
for step lighting
Include:
20° TILT
Micro Louver
Light bends 20° to Step with PORT-LL Lens & Louver
STEP LIGHT KIT #PORT-LL
Louver lens
Retainer
ring
glass
lens
micro
louver
lens
neutral
20° tilt
density
lens film
filter or
warming
glass
filter
lens
inner
retainer
ring
Warming Filter 2500K
Wall Floor Recessed
20° Beam Tilt Lens
PORT-LL includes Retainer Ring, Micro Louver, 20° Beam Tilt Lens,
Warming Filter and Neutral Density Filter for Dimming 50%
Neutral Density Filter
Extremely slim and recessed, with an integral 12VAC 2.4 watt, high-powered, warm white LED, the fixture features a 16 degree precise focus, tempered glass
lens with a marine-grade aluminum, round or square, beveled edge trim. The fixture is rated for outdoor using a wet location electrical box or indoor using a
standard octagon electrical box. The aluminum housing dissipates heat and allows the LED to operate at its optimum working temperature, thus giving the
LED a stable light output and long lifetime. The trim accepts any color of Rosco or Lee color filter gels. Compatible remote power supplies are TE-60L-12, T-15012 or T300-12 p.52
BODY FInish
Satin Aluminum
REMOTE POWER
Use Electronic TE-60L-12AC, Magnetic T-150-12, T-300-12 p. 52.
Lamp
Specification
LED - 2.4W Warm White, 3000K, 82CRI
Add a warming filter to bring the color to 2500K
Dimmer
Ordering
code
Visit www.edgelighting.com for updates.
port
PORT Port Step Light Kit
DescRipTiON
TRim
FiNish
RD
ST
SA
RDRound
SQ Square
ST Surface Trim
SA Satin Aluminum
DescRipTiON
Accessory
code
port
PORT Port Step Light Kit
LL
LL 1" Louver with 20° Beam Tilt Lens, Neutral Density Filter,
Warming Filter
www.edgelighting.com
137
sUN 3 LED
INDOOR/OUTDOOR
3" round or square recessed SUN3 has a 12VAC 9 watt, high powered warm white LED and features a
16 degree precise focus, tempered glass lens with a marine-grade aluminum, round, or square beveled
edge trim. The fixture is rated for outdoor using a wet location electrical box or indoor using a standard
octagon electrical box. The aluminum housing dissipates heat and allows the LED to operate at its
optimum working temperature, thus giving the LED a stable light output and long lifetime. The trim
accepts any color of Rosco or Lee color filter gels. Compatible remote power supplies are TE-60L-12,
T-150-12 or T-300-12 p.52
BODY FInish
REMOTE POWER
Lamp
Specification
Dimmer
Lighting Facts
LED Product
Light Output (Lumens)
Satin Aluminum
Watts
Lumens per Watt (Efficacy)
Use Electronic TE-60L-12, Magnetic T-150-12 or T-300-12 (pp. 32, 156).
Color Accuracy
70% lumen maintenance based on 50,000 hours of operation. 10 Watts is equal to
35 Watt MR16.
BEAM SPREAD Input volts WATTSCBCPRated LifeColor Temp (K)CRI
23 degrees 12VAC 10.2 1,520 50,000 2,812
80
345
10.2
33.8
80
Color Rendering Index (CRI)
Light Color
Correlated Color Temperature (CCT)
2812 (Warm White)
Visit www.edgelighting.com for dimming information.
Warm White
2600K
Bright White
3200K
Daylight
4500K
6500K
Visit www.lightingfacts.com for the Label Reference Guide.
All results are according to the IESNA LN-79-2008: Approved Method for the Electrical and Photometric Testing of Solid State Lighting.
EDGE LIGHTING: SUN3-**-**-**
8DEGREES
Ordering
code
SUN3
DescRipTiON
TRim
SQ
SC
sA
D
FC SC Surface Cover
SA Satin Aluminum
2'
380
0.8'
4'
95
10"
6'
42.2
1'-8"
8'
23.8
2'-4"
10'
15.2
3'-2"
12'
10.6
4'-10"
SQ Square
RDRound
DescRipTiON
Accessory
code
16DEGREES
Beam Angle
23°
sun3
LL
SUN3 Step Light KIT
LL 2" Louver with 20°
Beam Tilt Lens, Neutral Density &
Warming Filter
FiNish
DIA.
DIA.
138
www.edgelighting.com
30DEGREES
With Micro Louver
Step Light Kit
#SUN3-LL
3.43"
(8.7cm)
STEP LIGHT KIT #SUN3-LL
MICRO
louver
lens
neutral
20° tilt
density
lens film
filter or
warming
glass
filter
lens
inner
retainer
ring
J-Box
Cover Included
0.13"
(.33cm)
3.25"
(8.25cm)
3.85"
(9.78cm)
1.5"
(3.8cm)
SUN3-LL includes Retainer Ring, Louver, 20° Beam Tilt Lens,
Warming Filter and Neutral Density Filter for Dimming 50%
Junction Box
Supplied by Electrician
4.3"
(10.9cm)
Wall Floor Recessed
LOUVER lENS
Retainer
ring
glass
lens
Hexcell Louver
(sold separately)
Wet location Junction Box
Supplied by Electrician
Indoor Octagon Junction Box
Supplied by Electrician
www.edgelighting.com
139
ED HOUSING
FRONT
SIDE
BACK
Step Halogen & LED
ND FOR 16” - 24” (41 - 61cm)
R STUD SPACING
5.62”
14cm)
Recessed Housing*
Plaster Screen*
Flange*
3.21”
(8cm)
FRONT
TOP VIEW
SIDE
BACK
Wall (cut hole)
PLASTER SCREEN
(HOUSING COVER)
3.5"
(9cm)
Step
7.47”
(19cm)
3.5"
(9cm)
1.25"
(3cm)
1.25"
(3cm)
Plaster Screen*
Flange*
Transformer
RECESSED HOUSING
PLASTER
SCREEN
*not used when installing in furniture, stairs, or mirrors
(HOUSING COVER)
3.21”
Step
(8cm)
wall recessed fixture is perfect for stairs or walls. Scoop reflector and body
3.19”
in satin aluminum finish. Halogen Step KIT (8cm)
includes: H1M Step (master) new
construction housing, plaster screen, 10 watt 12 volt G4 bipin base halogen JC lamp,
and a 60 watt electronic transformer that can power up to 5 H1S (slaves). LED L1M
Step (master) includes, a 2 watt lamp and 60 watt LED Transformer that can power
up to 25 LED L1S Step (slaves), which do not include transformers.
7.47”
(19cm)Body
Finish
Lamp
Specification
6.69”
total
(17cm)
wattage
Dimmer
Ordering
code
HALOGEN (H)
H1 - Jc-MS/g4/10W
L1M - 2W (with 60W power supply)
L1S - 2W (without power supply)
DescRipTiON
lamp
FiNish
VOlTage
KIT
H1M
sA
Standard 120V
(leave blank)
Housing &
Fixture
H1MHalogen Master
H1S Halogen Slave
L1M LED Master
L1S LED Slave
Frame
SA Satin Aluminum 2 230V 50Hz
WHWhite
Recessed Housing*
Plaster Screen*
Flange*
FRONT
SIDE
BACK
FRONT
SIDE
BACK
Wall (cut hole)
3.125"
(8cm)
Frame
3.125"
(8cm)
2.75"
(7cm)
1.25"
(3cm)
Transformer
PLASTER SCREEN
(HOUSING COVER)
7.47”
(19cm)
*not used when installing in furniture, stairs, or mirrors
Frame wall recessed fixture is perfect for furniture, wall and mirror
installations. The fixture features a silver finish with a frost white diffuser.
Frame KIT includes Frame, new construction housing, plaster screen,
electronic transformer and 20 watt 12 volt G4 bipin base halogen JC lamp.
General light distribution. ADA compliant.
Body Finish
Lamp
Specification
total
wattage
Dimmer
Ordering
code
Silver
HALOGEN (H)
H1 - JC/G4/20W
H1- 20W
Low Voltage Electronic
DescRipTiON
lamp
VOlTage
KIT
H1
Standard 120V
(leave blank)
frame
KIT
140
Housing &
Fixture
www.edgelighting.com
H1 Halogen
2 230V 50Hz
Transformer
*not used when installing in furniture, stairs, or mirrors
H1 - Low Voltage Electronic L1 - Low Voltage Electronic
step
Frame
LED (L)
L1M/L1S - 3000K, 80 CRI
6.69”
(17cm)
H1 -10W
Wall (cut hole)
7.47”
(19cm)
Satin Aluminum or White
KIT
3.21”
(8cm)
Metal Housing (screw to studs)*
Vision 3
Wall (cut hole)*
PLASTER SCREEN
(HOUSING COVER)
SIDE
RECESSED HOUSING
FRONT
3.25”
(8cm)
5.75"
(15cm)
3”
(8cm)
3.5" 9”
(9cm)
(23cm)
9”
(23cm)
Vision 3
3"
(8cm)
Transformer*
*not required when installing in furniture
PLASTER SCREEN
(HOUSING COVER)
RECESSED HOUSING
6.75”
(17cm)
3.25”
(8cm)
Plaster Screen*
9.125"
(23cm)
3.5"
(9cm)
9”
(23cm)
Metal Housing (screw to studs)*
6.75”
(17cm)
3”
(8cm)
Vision 3 square wall recessed
fixture is perfect for walls and furniture.
Inverse scoop reflector and body in silver finish. Vision 3 KIT includes Vision
3, housing, plaster screen, electronic transformer and 20 watt 12 volt G4
bipin base halogen JC lamp. General light distribution.
9”
Body Finish
(23cm)
Lamp
Specification
6.75”
(17cm)
total
wattage
Dimmer
HALOGEN (H)
H1 - Jc/g4/20W
6.75”
H1(17cm)
- 20W
H1 - Low Voltage Electronic
DescRipTiON
lamp
VOlTage
KIT
H1
Standard 120V
(leave blank)
vision3
KIT
Housing &
Fixture
H1 Halogen
Wall Floor Recessed
Ordering
code
Silver
2 230V 50Hz
Vision 8
RECESSED HOUSING
PLASTER SCREEN
(HOUSING COVER)
3.25”
(8cm)
2.75”
(7cm)
FRONT
Wall (cut hole)*
5.75"
(14.5cm)
SIDE
Metal Housing (screw to studs)*
Plaster Screen*
15.75"
(38cm)
15.25"
(38cm)
15”
15”
(38cm)
9.25"
(38cm)
(23.5cm)
Vision 8
Transformer
6.75”
3.25"
(17cm)
6.75”
2.75"
(17cm)
(8cm)
(7cm)
RECESSED HOUSING
3.25”
(8cm)
PLASTER SCREEN
(HOUSING COVER)
Vision 8 rectangular wall recessed fixture is perfect for walls and furniture.
2.75”
Inverse scoop reflector(7cm)
and body in silver finish. Vision 8 KIT includes Vision 8,
housing, plaster screen, electronic transformer and 20 watt 12 volt G4 bipin base
halogen JC lamp. General light distribution.
Body Finish
15”
(38cm)
*not required when installing in furniture
Lamp
Specification
15”
(38cm)
total
wattage
Dimmer
6.75”
Ordering
(17cm)
code
Silver
HALOGEN (H)
H1 - Jc/g4/20W
H1 - 20W
H1 - Low Voltage Electronic
DescRipTiON
lamp
VOlTage
KIT
H1
Standard 120V
(leave blank)
6.75”
(17cm)
vision8
KIT
Housing &
Fixture
H1 Halogen
2 230V 50Hz
www.edgelighting.com
141
Download