Job_______________________________________________
Type______________________________________________
Catalog #__________________________________________
HC
SERIES
Large
Wallpack
APPLICATION
• The Large Wallpack is a clean,
architecturally appealing waterproof
wall mount fixture designed for indoor
or outdoor use. Ideally suited for
security or general area lighting in
stairways, walkways, parking lots,
driveways, foliage and facade lighting.
Available in many energy efficient
wattage and lamp combinations.
CONSTRUCTION
• Weatherproof housing is heavy duty
cast aluminum. Injection molded,
impact resistant borosilicate prismatic
glass refractor is gasketed and hinged
for ease of relamping and maintenance. Anodized aluminum reflector
provides even, efficient spread.
• Standard units are supplied with High
Power Factor or Normal Power Factor
ballasts, 4KV rated medium base
porcelain sockets.
• Fixture is designed for wall mounting
in wet and damp locations. Housing is
provided with 1/2” IPS threaded hole
in back and unit is provided with a
gasketed back plate for mounting to a
weatherproof junction box. Additional
tapped holes are provided in fixture
sides for continuous row feed and on
fixture top for optional photocontrol
mounting.
FINISH
• Housing and door frame are finished
in baked bronze acrylic for maximum
durability.
ELECTRICAL
•
listed and
listed components for wet and damp locations.
• I.B.E.W. labeled.
LUMAX INDUSTRIES, INC. Chestnut Avenue & Fourth Street
Altoona, PA 16603-0991 814-944-2537 Fax 814-944-6413
www.lumaxlighting.com
HC SERIES
Large
Wallpack
PHOTOMETRIC DATA
Catalog Number: HC35-LH1
Catalog Number: HC100-MC1
V - Vertical distribution in 0 degree plane
H - Horizontal distribution in 35 degree plane
V - Vertical distribution in 35 degree plane
H - Horizontal distribution in 65 degree plane
ORDERING GUIDE
LAMPS:
HC
Series
LampStyle
Ballasts
HC
35
SH
1
HC
50
SH,MC
1
HC
70
SH,MH
1
HC
100
SH,MC,MH
1
HC
150
SH
1
HC
175
MC,MH
1
HC
250
SH,MC,MH
1
HC
400
SH,MC,MH
1
Volts Options
35 - 35 Watt High Pressure Sodium
50 - 50 Watt High Pressure Sodium
or Mercury Vapor
70 - 70 Watt High Pressure Sodium
or Metal Halide
100 - 100 Watt High Pressure Sodium,
Metal Halide or Mercury Vapor
150 - 150 Watt High Pressure Sodium
or Metal Halide
175 - 175 Watt Metal Halide
or Mercury Vapor
250 - 250 Watt High Pressure Sodium,
Metal Halide or Mercury Vapor
400 - 400 Watt High Pressure Sodium,
Metal Halide or Mercury Vapor
Note: Except on 250 and 400 Watt fixtures,
lamps are included with fixture.
BALLASTS:
MC - Mercury Vapor
MH - Metal Halide
SH - High Pressure High Power
Factor Sodium
VOLTS:
1
2
3
4
6
-
120 Volts
208 Volts
240 Volts
277 Volts
Quad Tap 120, 208, 240
and 277 Volt
Note: 50 Watt Mercury Vapor available in
120 and 277 volt only.
OPTIONS:
Use the following suffix for:
-F1
Fusing, one per fixture
-F2
Double fuse (208 and 240 Volt
only)
-PC
Dusk to Dawn Photocontrol
-PG
Polycarbonate Guard
-TP
Tamperproof Screws
-WG Stainless Steel Wire Guard
Available with quartz restrike
Note: Polycarbonate Guard and Wire Guard
can not be used together.
DIMENSIONS
specifications and dimensional data subject to
change without notice
See Options & Accessories section of catalog for knockout diagram No. 149.
LUMAX INDUSTRIES, INC.
HC.0411