C8SRXPSeries
TS
Project/Location:
Contractor:
Date:
Exit Sign and Transfer Panel for
Hazardous Locations
Features
Typical Specification
Remote exit sign Series RFX-CS
Remote Exit Sign C8SRXP Series:
CSA certified for use in hazardous locations:
Class I, Divisions 1 and 2, Groups B, C, D
Class II, Divisions 1 and 2, Groups E, F, G
Class III, Divisions 1 and 2
Die-cast aluminum body with grey epoxy powder
coat finish;
Exit sign housing and faceplate made of 14-gauge steel,
grey enamel finish
Faceplate features universal directional chevrons
(knockouts)
Prepared by:
Supply and install remote exit sign Emergi-Lite C8SRXP Series. The exit sign housing shall be constructed of 14gauge steel and finished in grey enamel. The faceplate shall be constructed of steel and feature universal directional
knockout chevrons, the letters shall be red, not less than 6’’ (150mm) in height with a ¾’’ (19mm) stroke. The sign
shall be supplied complete with a ___ volt LED light source and function from a single voltage source only, in AC and
DC current. The light source shall use AllnGaP LEDs and shall consume less than 5 watts in either AC or DC mode.
The exit sign shall be CSA-C860 certified.
The exit sign shall be suitable for Class ____ , Division ____, Group ____.
The exit sign shall be Emergi-Lite model: ___________________________________________.
Two-wire circuit for both AC and DC inputs
Transfer Panel:
Light source is AllnGaP LEDs; consumes less than
5 watts in AC or DC mode
Supply and install the Emergi-Lite transfer panel for hazardous locations remote exit signs. The unit shall have two
voltage inputs: _____ Vac and ____ Vdc and shall be able to maintain an output of _____ volts, 25 watts, for the
permanent supply of a total of five (5) remote LED exit signs.
Available in 6, 12, 24 and 120Vac/dc
New, easy-to-build catalog number based on the
Emergi-Lite severity codes
CSA certified, meets or exceeds C860
The transfer panel shall be suitable for Class ___ , Division ___, Group ____ or for a NEMA-1 environment.
The transfer panel shall be Emergi-Lite model: ___________________________________________.
Transfer Panel
Available with housing for hazardous locations (Class 1,
Division 1) or NEMA-1 housing (for use outside the
hazardous location area)
Standard AC input: 120Vac, optional: 277Vac, 347Vac
Standard DC input: 6, 12 or 24Vdc
Two-wire output with permanently present AC/DC low
voltage
Power Consumption
Output power: 25W, can drive up to five (5) remote units
Series C8SRXP
Model
Also available as self-powered exit sign, battery unit and
combo unit; see EXP catalogue sheet
AC Specs
Standard ac/dc
red legend
New, easy-to-build catalog number based on the
Emergi-Lite severity codes
DC Specs
6Vac
6Vdc
12Vac
12Vdc
Less than 5W
Less than 5W
24Vac
24Vdc
120Vac
120Vdc
*NOTE: 6, 12 or 24 volt exit signs shall be connected to transfer panels, maximum five (5) signs per panel.
Made in Canada
1.
Environment
Severity Code
Cl. I, Div. 1, Gr. B
S1
Cl. I, Div. 1, Gr. C, D
S2
CI. I, Div. 2, Gr. B, C, D
S3
Cl. II, Div. 1 & 2, Gr. E, F, G
S4
Cl. III, Div. 1 & 2
2.
C8SRXP Temperature Codes (40°C ambient)
Severity Code
S1
S2
S3
S4
Temperature Code
T6
T6
T3C
T3C (E,F,G)
CSA/UL rating
Max. 85°C
Max. 85°C
Max. 160°C
Max. 160°C
00
C8SRXP
Series
Project/Location:
Contractor:
Date:
Exit Sign and Transfer Panel for
Hazardous Locations
Prepared by:
Dimensions
WALL MOUNT:
(SEVERITY S2 ONLY)
18” [45.7cm]
147⁄8” [37.7cm]
33” [89.3cm]
6” [15.3cm]
281⁄2” [72.3cm]
107⁄8” [27.5cm]
18” [45.7cm]
6” [15.3cm] 6” [15.3cm]
41⁄2” [11.5cm]
41⁄8” [10.4cm]
11 ⁄4” [28.7cm]
4” [10.2cm]
1
195⁄8” [49.9cm]
3” [7.7cm]
103⁄4” [27.4cm]
CEILING MOUNT
31⁄2” [9.0cm]
SEVERITY S3, S4
PENDANT MOUNT
12 ⁄4” [31.2cm]
WALL MOUNT
DOUBLE PENDANT MOUNT
3
18” [45.7cm]
123⁄8” [31.4cm] 7⁄8” [2.1cm]
18” [45.7cm]
42” [106.6cm]
1
18” [45.7cm]
173⁄8” [44.2cm]
95⁄8” [24.5cm]
241⁄4” [61.5cm]
71⁄8” [18.1cm]
147⁄8” [37.7cm]
51⁄4” [13.3cm]
6” [15.3cm]
161⁄8” [41.1cm]
18 ⁄8” [46.6cm]
CEILING MOUNT
123⁄8” [31.4cm]
DOUBLE PENDANT MOUNT
105⁄8” [26.9cm]
SEVERITY S1, S2
PENDANT MOUNT
42” [106.6cm]
101⁄4” [26.0cm]
TRANSFER PANEL
N0N-HAZARDOUS LOCATION
TRANSFER PANEL SEVERITY:
S2, S3, S4
91⁄4” [23.5cm]
41⁄8” [10.4cm]
10” [25.4cm]
9” [22.9cm]
81⁄2” [21.5cm]
83⁄8” [21.2cm]
8” [20.3cm]
NOTE : Wall mount available only for severity: S2, S3 and S4
Transfer Panels
Series
120= 120Vac
347= 347Vac
Voltage
-6= 6 volts
-12= 12 volts
-24= 24 volts
Series
Power
-TS= transfert panel
Housing
-25= 25 watts
Blank= NEMA 1
XP= hazardous locations
Ordering Information
Series
C8SRXP1= SORTIE single face C860
C8SRXP2= SORTIE double face C860
Mounting
C= ceiling
P= suspension
W= wall
Severity Code
S1= CL.1, Div.1, Gr. B
S2= CL.1, Div.1, Gr. C, D
S3= CL.1, Div.2, Gr. B, C, D
S4= CL.2, Div.1, & 2 Gr.E, F, G CL.3, Div.1 & 2
Voltage
-EM6= 6 volts
-EM12= 12 volts
-EM24= 24 volts
-EM120= 120 volts
Lamp model
Blank= less than 5W LED
EXAMPLE: RFX-CSSFS1C6
00