Metalux
D ES C R IPTION
Catalog #
SWLED is a versatile LED surface or wall mount luminaire which can
be used in a broad range of commercial and industrial applications.
This series provides customers with a high quality luminaire utilizing
the latest LED, solid state lighting and electronic driver technology for
optimal performance and maximized energy efficiency. Offered with
three different lens distributions and three different lens options which
provides uniform light distribution that is an ideal choice for general
purpose lighting where customers want to move away from traditional
fluorescent solutions.
Type
Project
Comments
Date
Prepared by
S PEC IFIC A TION FEA T U R E S
Construction
E me rg e n cy Ba ttery Pack Option
Housing consists of die formed
cold rolled steel with decorative
white opaque injection molded end
plates. Reflector/channel wireway
cover secured by fasteners for
easy wireway access. Channel
back has numerous KO’s for easy
installation.
Optional 120v-277v integral
emergency battery pack is
available in 7-watts or 14-watts
to meet critical life-safety lighting
requirements. The 90-minute
batteries provide constant power
to the LED system, ensuring codecompliance. A test switch/indicator
button can be tested safely from
the ground using a laser pointer,
while the patented EZ Key prevents
accidental discharge of the battery
during construction. See ordering
information for details.
Controls
The SWLED is Powered by Fifth
Light, with a standard 0-10V
continuous dimming driver that
works with any 0-10V control/
dimmer. Combine with energy
saving products like occupancy
sensors, daylighting controls and
lighting relay panels to maximize
energy savings. In addition, the
SWLED can include a factoryinstalled integrated sensor system
for occupancy and daylight
dimming control and manual
control from an optional handheld
remote. Or, specify the Digital
Addressable Lighting Interface
(DALI) drivers (consult factory
for 1% dimming), for use with
Fifth Light controls. See ordering
information for details on all three
options.
F in ish
Highly reflective post painted
finish (PAF) standard offering
customers the optimal finish
and handling. Additionally, each
housing is treated in a multistage
iron phosphate pretreatment,
insuring maximum bonding and
rust inhibitor.
- LC (clear), LN (Semi-Frost with
narrow distribution) and LW (full
frost with wide distribution). This
lenses provide different lighting
distribution allowing customers
to choice between smooth even
illumination. Lens is securely held
in place by removable injection
molded white end caps that can be
easily removed for installation and
maintenance.
Installation
Fixture may be surface (wall or
ceiling) and suspended mounted.
See accessories below for ordering
information.
SWLED
LED
Compliance
Sh ie ld in g
Specially designed LED lens blends
and linear optics allows us to offer
three different lens versions
Modules are UL recognized
components and indoor luminaires
are cULus listed for up to 40ºC
ambient environments, RoHS
compliant, and LED modules
comply with IESNA LM-79 and
LM-80 standards. DesignLights
Consortium™ Qualified and
classified for DLC Standard, refer to
www.designlights.org for details.
Surface and Wall LED
El e c t r i c a l
Long-Life LED system coupled with
electrical driver to deliver optimal
performance. LED’s available in
3500K, 4000K or 5000K with a
typical CRI 85. Projected life is
60,000 hours at 70% lumen output.
Electronic drivers are available for
120-277V applications. A 0-10V
dimming driver is standard.
4-11/16"
[120mm]
4-1/2" [114mm]
MOUNTING D A TA
2'
CERTIFICATION DATA
cULus - 1598
Damp Location Listed
LM79/LM80 Compliant
ROHS Compliant
DesignLights Consortium™ Qualified
NOM Compliant
21-3/16" [538mm]
Lensed
4-11/16"
[120mm]
28" [711mm]
4'
45-3/16" [1148mm]
Lensed
4-11/16"
[120mm]
52" [1320mm]
Safe and convenient means of
disconnecting power
ADF142352
2015-09-29 14:27:51
S W LE D
WATTA GE
Lens Type
Lumen
Type
Length
Catalog Logic
Nominal
Lumens
Wattage
lm/W
Full Frost (LW)
Standard
2 ft.
2SWLED-LD1-8SL-LW-UNV-L8XX-CD1-SVPD2-U
800
10.1
105
Full Frost (LW)
Standard
2 ft.
2SWLED-LD4-16SL-LW-UNV-L8XX-CD1-SVPD2-U
1600
18.9
99.5
Full Frost (LW)
Standard
2 ft.
2SWLED-LD4-20SL-LW-UNV-L8XX-CD1-SVPD2-U
2000
23.5
92
Full Frost (LW)
High
2 ft.
2SWLED-LD4-24HL-LW-UNV-L8XX-CD1-SVPD2-U
2400
24.9
94.5
Full Frost (LW)
High
2 ft.
2SWLED-LD4-28HL-LW-UNV-L8XX-CD1-SVPD2-U
2800
29.1
89.5
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-16SL-LW-UNV-L8XX-CD1-SVPD2-U
1500
12.8
116.7
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-20SL-LW-UNV-L8XX-CD1-SVPD2-U
2000
17.6
113.6
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-28SL-LW-UNV-L8XX-CD1-SVPD2-U
2800
25.6
109.6
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-32SL-LW-UNV-L8XX-CD1-SVPD2-U
3200
30
101.7
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-36SL-LW-UNV-L8XX-CD1-SVPD2-U
3600
35.2
102.1
Full Frost (LW)
Standard
4 ft.
4SWLED-LD4-40SL-LW-UNV-L8XX-CD1-SVPD2-U
4000
40.4
99.1
Full Frost (LW)
High
4 ft.
4SWLED-LD4-44HL-LW-UNV-L8XX-CD1-SVPD2-U
4400
39.2
112.2
Full Frost (LW)
High
4 ft.
4SWLED-LD4-48HL-LW-UNV-L8XX-CD1-SVPD2-U
4800
43.3
110.9
Full Frost (LW)
High
4 ft.
4SWLED-LD4-52HL-LW-UNV-L8XX-CD2-SVPD2-U
5200
46.8
111.0
Full Frost (LW)
High
4 ft.
4SWLED-LD4-56HL-LW-UNV-L8XX-CD2-SVPD2-U
5600
51.1
109.6
Full Frost (LW)
High
4 ft.
4SWLED-LD4-60HL-LW-UNV-L8XX-CD2-SVPD2-U
6000
55.5
108.1
Full Frost (LW)
High
4 ft.
4SWLED-LD4-64HL-LW-UNV-L8XX-CD2-SVPD2-U
6400
60
106.7
Full Frost (LW)
High
4 ft.
4SWLED-LD4-70HL-LW-UNV-L8XX-CD2-SVPD2-U
7000
69
101.4
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
ADF142352
2015-09-29 14:27:51
S W LE D
PH OTOM ETR IC S
90˚
75˚
450
60˚
900
45˚
4SWLED-LD4-40SLLW-UNV-L835-CD1
Candlepower
Electronic Driver
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
Linear LED 3500K
Spacing criterion:
(II) 1.2 x mounting
height, (⊥) 1.2 x
mounting height
Lumens: 4087
1350
0˚
15˚
Input Watts: 42.5W
30˚
Efficacy: 96.2 lm/W
Test Report:
4SWLED-LD4-40SLLW-UNV-L835-CD1.
IES
C o e f fi c i e n t s o f U t i l i z a t i o n
Effective floor cavity reflectance
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
80%
30
70
50
117
105
95
86
78
72
66
61
57
53
50
117
99
85
74
66
58
53
48
43
40
37
117
94
78
66
56
49
43
39
35
31
29
70%
30
10
70
50
117
90
71
59
49
42
37
32
29
26
23
113
101
91
82
75
69
64
59
55
51
48
113
96
83
72
64
57
51
46
42
39
36
113
91
76
64
55
48
42
38
34
31
28
Angle
Along II
45°
Across ⊥
1194
1203
1184
1153
1110
1058
996
926
849
766
678
588
495
400
302
207
125
55
4
1194
1188
1159
1123
1080
1032
978
918
855
786
713
639
564
491
419
352
291
236
188
1194
1173
1142
1110
1074
1031
983
933
878
816
754
690
626
563
503
445
390
337
285
20%
10
50
50%
30 10
50
30%
30 10
50
10%
30 10
113
87
70
58
49
42
36
32
28
25
23
106
90
78
68
60
54
48
44
40
37
34
106
86
72
61
53
46
41
36
33
30
27
100
85
73
64
57
51
46
42
38
35
33
100
82
68
58
50
44
39
35
32
29
26
94
80
69
60
54
48
44
40
36
34
31
94
77
65
56
48
42
38
34
31
28
26
106
83
67
55
47
40
35
31
28
25
22
100
79
64
53
45
39
34
30
27
24
22
94
75
61
51
44
38
33
29
26
24
21
0%
0
91
72
59
49
41
35
31
27
24
22
20
Zonal Lumen Summary
Zone
0-30
Lumens
905
% Fixture
22.1
0-40
1480
36.2
0-60
2656
65.0
0-90
3738
91.5
0-180
4087
100.0
ORDER ING INFOR M A TION
SAMPLE NUMBER: 4SWLED-LD4-40SL-LW-UNV-L840-CD1-SVPD2-U
Length
2=2 ft. Length
4=4 ft. Length
Series (13)
SWLED=LED Surface and Wall
LED Type
LD4=LED 4.0
Voltage
347V=347 Volt (11)
480V=480 Volt (11)
UNV=Universal
Voltage 120-277 (1)
UNC=Universal
Voltage347/480 (4), (11)
LED Lumens Output (2)
8SL=800 (3)
16SL=1600 (3)
20SL=2000
24HL=2400 (3)
28HL=2800 (3)
28SL=2800 (4)
32SL=3200
36SL=3600
40SL=4000
44HL=4400
48HL=4800
52HL=5200 (12)
56HL=5600 (12)
60HL=6000 (12)
64HL=6400 (12)
70HL=7000 (12)
Optic
LC=Clear Lens
LN=Semi-Frost Lens - Narrow
LW=Full Frost Lens - Wide
Driver Type
CD=0-10V Dimming Driver
HDC=0-10V Dimming Driver
(1% - 100% Dimming) (11)
5LTD=Fifth Light (DALI) Driver
Number of Drivers
1=1 Driver
2=2 Drivers
Packaging
U=Unit Pack
CD=0-10V Dimming Driver
(10% - 100% Dimming)
HCD=0-10V Dimming Driver
(1% - 100% Dimming) (13)
Options
Occupancy Sensor
ACCESSORIES
SVPD1=Integrated occupancy
and daylight dimming sensor,
(Order Separately)
500 sq. ft. coverage (6), (8), (10), (15)
SCF=Fixed Stem Set (Specify Length)
SVPD2=Integrated occupancy and
SCS=Swivel Stem Set (Specify Length)
daylight dimming sensor,
SCA=Adjustable 48" Stem Set
900 sq. ft. coverage (8), (14), (15)
A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling
SVPD3=Integrated occupancy and
(Use 2 Per Fixture)
daylight dimming sensor,
1200 sq. ft. coverage (7), (15)
Emergency (4), (9)
EL7W=7-watt, 120V-277V emergency battery pack installed (5)
EL14W=14-watt 120V-277V emergency battery pack installed (5)
CCT
L835=3500K
L840=4000K
L850=5000K
NOTES: (1) Not available when specifying emergencies, voltage must be specific. (2) Nominal lumen output. (3) 2 ft. model. (4) Only available in 4 ft. models. (5) With integral test switch/indicator/laser test. For
approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (100 lm/W x 7=700 lumens). IES-format photometry for luminaire under
emergency operation available. (6) For mounting heights up to 8 ft. (7) For mounting heights up to 30 ft. (8) For mounting heights up to 12 ft. (9) Integral EL battery pack is rated for 35°C. (10) Product configuration
meet ADA. (11) Consult factory. (12) Currently not DLC listed, consult factory. (13) DesignLights Consortium™ Qualified and classified for DLC Standard (some models are not DLC qualified). Refer to www.designlights.org for details. (14) For wall mount applications. (15) For use with CD driver only.
Specifications & dimensions subject to change without notice. Consult your Eaton Representative for availability and ordering information.
SH IP P ING D A T A
Catalog No. Wt.
2SWLED-LD4
4SWLED-LD4
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
6 lbs.
12 lbs.
ADF142352
2015-09-29 14:27:51
S W LE D
INTEGRA TED S ENS OR
Des c r i p t i o n
This innovative luminaire-integrated sensor control system is optimized for code-compliant occupancy detection and daylight
harvesting – all from within the foot print of Metalux’s award-winning recessed ambient luminaires.
N o N ew W i re s
An in-place fixture retrofit is all that’s needed to meet most energy codes in commercial spaces. The sensor
system is factory wired to the luminaire, switching on or off based on occupancy, and dimming the light
when enough daylight is available.
S ophi s ti c a te d l i g h t i n g co n tro l with o u t co mmissio n in g
The luminaire-integrated sensor system offers out-of-the-box operation using thoughtful default settings.
Fl exi bi li t y a n d I n d i v i d ua l Co n tro l
When the application demands more, the sensor system has the option to make changes using a remote control. The remote allows changes from the
default settings for occupancy, target light level, preset lighting levels, and more.
C os t -effe c t i ve , S t a n d - a lo n e Op e ra tio n
With a single product to mount and a single electrical connection to make, the Metalux luminaire with an integrated sensor system saves money on
the total installed cost when occupancy or daylight harvesting controls are needed. The integrated sensor system works stand-alone, without the need
for additional switches and dimmers. When manual-on, manual dimming or other code-required control schemes are needed, please see the
comprehensive offering of Greengate and Fifth Light solutions from Cooper Controls at www.coopercontrol.com.
M et al ux I n t e g r a t e d S e n so r Se q u e n ce o f Op e ra tio n
The SWLED Metalux luminaires are available with an optional integrated sensor capable of occupancy sensing and dimming daylight harvesting. The
sensor is preinstalled and factory wired, simplifying the installation of a complete, code-compliant lighting system.
The occupancy sensing portion of the sensor uses Passive Infrared (PIR) technology with Auto-on/Auto-off operation. The lens in the center of the
sensor directs the view of a heat detector component into multiple zones to sense the heat emitted by occupants moving through the room. The sensor
is preset to go between full on and 50% brightness, never leaving the area dark. To trigger the light to full on, an occupant must move from one zone to
another. When motion through the various zones ceases, the sensor logic concludes the room is unoccupied, and begins a count-down timer. By
default, the timer is factory-set to 20 minutes, and can be adjusted to 5, 10, 15 and 20 minute increments using the optional remote control, model
number HHPRG-MS. Any motion detected between zones during the stop the timer and the light will remain on. When motion is detected, a red LED
located behind the lens will blink. In addition to the default on/off function, the sensor has an Energy Saver feature, where the light can be set to dim
to a preset level after half of the count-down timer, and when no further motion is detected to the remainder of the count-down, the light will shut off.
The Energy Saver feature preset level and feature are configured using the optional remote control. See the Sensor Programming Guide that comes
with the HHPRG-MS remote for details on this feature. The red LED indicator will also blink repeatedly to confirm any programming change.
The daylight harvesting portion of the sensor uses a small photoreceptor behind the occupancy sensing lens. The sensor continuously measures the
available light in the room, even when the fixture is turned off. This allows sensor to operate in one of three daylighting modes, where the artificial
light from the paired Metalux luminaire can be set to dim or brighten based on the amount of available light from surrounding natural and artificial
light. Since the sensor measures light from its luminaire along with other light sources, this sensor follows a closed-loop daylight harvesting style. The
first mode, Daytime, is active when the sensor detects light of at least 100 lux in the room. In Daytime mode, when the light is turned on after
detecting occupancy, the sensor will begin balancing the luminaire light level relative to the total available light it measures. The default light balancing
target is 500 lux. This level can be adjusted higher or lower using the optional HHPRG-MS remote, pressing “SET” and then pressing the “DO”
(Daytime Occupied) button. The Daytime Unoccupied, “DU” has a default of level of 50% to prevent the lights from turning off completely when
unoccupied. More details on this function are found in the Sensor Programming Guide for the HHPRG-MS remote.
The next two modes, Twilight and Nighttime, function in a similar way, allowing the artificial light to dim or brighten to different levels based on the
surroundings. While primarily for use in outdoor luminaires, these modes are available for use in areas with a wide range of natural light, including
atriums, day lit stairwells, and rooms with large or continuous windows. The Twilight mode is active when the sensor detects 50-100 lux in the off
position, and has a 300 lux default light balancing target. The Nighttime mode is active when the sensor detects less than 50 lux, and has a 250 lux
default light balancing target. Like the Daytime mode, there are separate settings for Twilight Occupied (“TO”), Twilight Unoccupied (“TU”), Nighttime
Occupied (“NO”) and Nighttime Unoccupied (“NU”) which can be adjusted and set using the optional HHPRG-MS remote.
In addition to use for programming the sensor, the optional HHPRG-MS remote can be used to override the functions of the sensor temporarily. The
remote has raise/lower buttons to adjust the light level for special tasks, as well as a power button to turn the lights on or off. Unless the SET button
and another function is selected, any changes made using these buttons will revert to the programmed settings after the sensor has not detected
occupancy for its programmed time, turned to “Off” mode. At the next detection of occupancy, the sensor will revert to its programmed settings for
count-down timer and light balancing.
C over ag e P a t t e r n s n e x t p a g e
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
ADF142352
2015-09-29 14:27:51
S W LE D
S ENSOR D ETA ILS - S W LE D
SVPD1 Coverage Pattern
Coverage
4m
[12 ft.]
Top View
CL
Side View
3.3m
[10 ft.]
0m
[0 ft.]
0m
[0 ft.]
4m
[12 ft.]
0m
[0 ft.]
4m
[12 ft.]
Reccomended Mounting Height 8–12 ft.
4m
[12 ft.] Major Motion
SVPD2 Coverage Pattern
Top View
CL
9.1m
[30 ft.]
6.1m
[20 ft.]
4.5m
[15 ft.]
3m
[10 ft.]
1.5m
[5 ft.]
Side View
0
0
2.4m
[8 ft.]
1.5m
[5 ft.]
3m
[10 ft.]
4.5m
[15 ft.]
6.1m 4.5m 3m 1.5m 0 1.5m 3m 4.5m 6.1m
[20 ft.] [15 ft.] [10 ft.][5 ft.]
[5 ft.][10 ft.][15 ft.] [20 ft.]
9.1m
[30 ft.]
6.1m
[20 ft.]
9.1m
[30 ft.]
Optional Remote
Control
R
Lo aise
we /
r
SVPD3 Coverage Pattern
5
LO
Side View
T
e
NU
ET
Pr
og
ra
HH
9.1m
[30 ft.]
20
NO
TU
sS
6.1m
[20 ft.]
15
ES
TO
DU
Sc
To
n
an sav es
:
d
se e sc
lec en
t s es
ce pre
ne
s
10
HI
SE
DO
0
Tim
Ou e
t
m
m
PR ing Re
G- mote
M
S
12.2m 9.1m 6.1m 3m
[40 ft.] [30 ft.] [20 ft.] [10 ft.]
0
3m 6.1m 9.1m 12.2m
[10 ft.] [20 ft.] [30 ft.] [40 ft.]
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
HHPRG-MS Remote
ADF142352
2015-09-29 14:27:51