SELECTION GUIDE
5M Family of
Analog-DIN Mount
Signal
Conditioning
Modules
Each 5M DIN Mount Signal Conditioner Module is a self-contained, manually configurable, analog
conditioning instrument with non-removable screw-terminal connectors. Every 5M module
is specifically designed to condition the appropriate connected sensor for repeatable and
accurate analog measurement results. They are ideal for critical monitoring operations
and high-speed analog control loops. Gain, phase, excitation, filters, zero-span, and other
critical characteristics are selectable per the front panel without the need to open the DIN
case - allowing easy setup and configuration without the need for software or computer support.
5M Series General Specifications:
Housing
Dimensions
Power Requirements
Analog Filters
Input Overvoltage Protection
ESD Protection
Accuracy
Operating Temperature Range
Analog Outputs
Status Lights
Power/Interface Connector
Polyamide - gray, Inflammability class acc to UL94 V0
HWD: 99.0 mm x 22.5 mm x 144.5 mm
11-28 VDC 3.6 watts; (5M14 - 24 VDC +/- 10%)
Selectable,Three Pole - Modified Butterworth - Low Pass, rolloff frequency varies with module
Up to 240 VAC rms on all signal and excitation lines
per EN61000-4-2
Offset and Gain Stability ±30 ppm/Deg C; vs. time ±10ppm/month
Gain Accuracy is limited to calibration source, 5M14 is ±0.02% of input range
-10° C to 70° C (14° F to 158° F)
Selectable ± 0 to 5 VDC or ± 0 to 10 VDC with linearity maintained for 20% overrange;
4-20 ma or 4-12-20ma; Thermocouple Module is model dependant for analog ouptut
Power - green, Overange - yellow
Non- removable screw terminals; 16 positions; 12 to 26 AWG; DIN Rail Power connection on some models
5M Series Models:
5M14(V) Thermocouple
Quad Channel E,J,K,N,R,S,T Linearized and Non-Linearized with internal CJC provided
5M30 AC LVDT
Single Channel 16 to 1600 mv/V, Remote sense, Auto / Manual Phase, Wide Zero
5M40 Frequency
Single Channel 250 to 32,000 Hz Full Scale, Sensitivity from 50mv to 250 V
5M64 DC Volts/4-20ma
Single Channel 50 mV to 50 VDC Full Scale; 4-20ma or 4-12-20ma
5M70 DC Strain
Single Channel 0.5 to 10 mv/V, Remote Sense, Symmetry, Wide Zero, Shunt
5M78 AC Strain
Single Channel 0.5 to 5.0 mv/V, Remote Sense, Symmetry, Phase, Shunt
IL70
Single Channel 0.5 to 10 mv/V, Symmetry, Wide Zero, Shunt
DC Strain-Inline
To learn more or request a demonstration contact: www.daytronic.com • Dayton, Ohio 1-800-668-4745