®
CAFETERIA
COMPONENTS
Alphabetical Index
DESCRIPTIONPAGE
DESCRIPTIONPAGE
A
AIR MIXING PLATES
AIR MIXING VALVES
I
ICE SCOOP/BRACKET
IN-LINE LIGHT CONNECTORS
INSERTS, CORNER
F17
F2
F18
K
KNURLED TUBING INSERTS
F13
B
BOTTLE OPENER
BRACKETS
3 RAIL
FIXED
FOLD DOWN
LID COVER
PROTECTOR
REMOVABLE
SNEEZE GUARD
TRAY SLIDE
BRITE GARD CLEANING PRODUCTS
ALL PURPOSE WIPERS
STAINLESS STEEL CLEANER
BURNERS
LOOP
MUSHROOM
REMOVABLE HEAD
RING
SADDLE
BUSHINGS, KNURLED
BURNER COMPONENTS
C
CAP STRIPS
CHANNEL, DOUBLE
CLAMP, GLASS FOR ROUND TUBING
CONTROL PANELS, ELECTRICAL
CONVEYOR ROLLER ASSEMBLIES
CONVEYOR ROLLER COMPONENTS
CUP DISPENSERS
F24
F24
F17
F6, F7
F6
F7
F16
F8
F7
F8
F5, F6
F
FASTENERS, EXPANDING
FINISHING RING, DRIP PLATE
FIXTURES, SHOWCASE
FLANGES, TUBING
G
GAS BURNER COMPONENTS
GAS BURNERS
GLASS CAPPINGS
GLASS CLAMP FOR ROUND TUBING
H
HOLE PLUGS
HOOKS, POT RACK
F16
F2, F3
F17
M
MOULDINGSF11
F19
F19
O
ORIFICE, GAS BURNER
F24
F22
F22
F22
F23
F22
F13
F24
P
PEDESTAL OUTLET BOX
PILOT LIGHT ASSEMBLY
POT HOOKS
POT RACK COMPONENTS
PROTECTOR ASSEMBLY
F4
F24
F12
F12
F8
F10
F9
F9
F4
F20, F21
F20, F21
F14
D
DIPPERWELLF17
DIVIDER BAR
F20, F21
DRIP PLATES
F15
DUPLEX RECEPTACLES
F4
E
ELBOWS, TUBULAR
ELECTRICAL COMPONENTS
END CAPS, TUBING
ESCUTCHEON PLATE
EXPANDING FASTENERS, TUBING
L
LID COVER BRACKET ASSEMBLY
LIGHTING COMPONENTS
LIQUID WASTE DUMP
F5, F12
F4
F5, F16
F13
F13
F13
F15
F2, F3
F13
F24
F22 - F23
F9
F9
F16
F12
R
RECEPTACLE PLATES
F4
RECEPTACLESF4
RECESSED HOUSINGS, ELECTRICAL
F4
RINGS, FINISHING
F15
ROLLER ASSEMBLIES
F21
ROLLER COMPONENTS
F20, F21
S
SAFETY SHIELD, BULB
F2
SCRAP BLOCKS
F17
SCRAP CHUTES
F17
SHOWCASE FIXTURES
F2
SINK CORNER INSERTS
F18
SLIM LINE FLUORESCENT LIGHT
F3
SNEEZE GUARD COMPONENTS
F8
SUPPORTS, TUBULAR
F12, F13
SWITCHESF4
T
TRAY SLIDE COMPONENTS
TRAY SLIDES
TUBING COMPONENTS
U
U-BENDS, TUBULAR
V
VALVES, BURNER
F5, F6
F5
F12, F13
F5
F24
W
WHEELSF20
Member Organizations
Component Hardware Group is a proud member of the following organizations
Products shown in this catalog may be listed and/or certified by one or more of the
following regulatory agencies and will be designated by the following marks
C
®
US
COMPONENT
NSF 61/9
UP CODE
®
FM
APPROVED
C
®
US
®
®
Showcase Light Fixtures
A
B
C
D
E
SHOWCASE LIGHT FIXTURES
REF. A
REF. B
FLUORESCENT LAMP
STAINLESS STEEL
SHOWCASE FIXTURES
SAFETY SHIELDS
• SAFELY...SECURELY SURROUNDS LAMPS
PREVENTING SHATTERED GLASS FROM SPREADING
• MEETS ALL N.E.C., F.D.A. & U.S.D.A. CODES
• SHATTERPROOF • U.V. STABILIZED
• SATIN FINISHED STAINLESS STEEL COVER
• U.V. SAFETY LENS COVER • PREWIRED ASSEMBLY
• FLUSH BALLAST BOX • 120V MODELS
MODEL NO.
O.A.
LENGTH
LAMP
SIZE
AMPS
LAMP
NO.
CHG
model no.
LAMP
TYPE
PIN
TYPE
LAMP
SIZE
shield
SIZE
trade
model no.
L77-3200-24
22”
(559mm)
(1) 15”
(381mm)
.28
T8-F14
T76-1522
T12
BI-PIN
24”
(610mm)
22”
(559mm)
TP152-W
L77-3200-36
34”
(864mm)
(1) 24”
(610mm)
.31
T8-F18
T76-2122
T12
BI-PIN
33”
(838mm)
31”
(787mm)
TP252-W
L77-3200-48
46”
(1168mm)
(1) 30”
(762mm)
.31
T8-F18
T76-2322
T12
BI-PIN
36”
(915mm)
34”
(864mm)
TP232-W
L77-3200-60
58”
(1372mm)
(2) 18”
(457mm)
.57
T8-F15
T76-3121
T12
BI-PIN
48”
(1219mm)
44”
(1118mm)
TP312-S
T76-3122
T12
BI-PIN
48”
(1219mm)
46”
(1168mm)
TP312-W
T77-6000
T8
SINGLE
or BI-PIN
18”
(457mm)
16-3/8”
(416mm)
T60
T77-1200
T8
SINGLE
or BI-PIN
36”
(914mm)
34-3/8”
(873mm)
T120
NOTE: O.A. LENGTH INCLUDES CONDUIT ELBOW. EACH FIXTURE
INCLUDES REMOVABLE COVER, 39” (914mm) LG. PREWIRED LEADS,
SLIP COUPLING, BX CONNECTOR, COLLAR SUPPORT, FLEXIBLE CONDUIT,
TUBING. FLUORESCENT TUBES NOT INCLUDED.
PACKAGED 24/CTN. NO SPLIT CARTONS
L77 SERIES
2-3/16” (56mm) HIGH
2-5/16” (59mm) WIDE
IN-LINE
CONNECTORS
FOR JOINING SHOWCASE
FIXTURES IN SERIES
MODEL NO. L77-0001
CROSS SECTION
COMPONENT
FOR L77 SERIES LIGHT FIXTURES
MODEL NO. L77-1000
MODEL NO. L77-1030
0° MOUNTING ANGLE
30° MOUNTING ANGLE
LISTED
#E240378
REF. C
F2
UNIVERSAL STAINLESS STEEL
MOUNTING BRACKET
www.componenthardware.com
REF. D
REF. E
Slim Line Fluorescent Light
SLIM LINE FLUORESCENT LIGHT
C
• ul and cul approved
US
• utilizes compact t4 super slim fluorescent tube (bulb included)
#E240378
• flexible removable cover
• durable light-weight housing
• built-in electronic ballast
• aluminum reflector
• super slim compact and efficient
• easy to link (8w/12w/16w up to 10pcs-20w/24w up to 6 pcs)
direct or with in line adapter
• On/off switch on housing
• mounting hardware, 6’ cord set and in-line adapter included
• standard 110v/60hz
• temperature range - 30º - 130º f (0º - 54ºC)
• Optional: 230v/dc12v, spare bulbs (by the case), spare in-line adapters
L73 SERIES FLUORESCENT LIGHTS
MODEL NO.
WATTAGE
LENGTH
LUMENS
L73-2004B-24
20
24-1/2” (622mm)
1200-1250
L73-2004B-28
24
28-1/2” (724mm)
1350-1400
L73-2004B-32
28
32-1/2” (826mm)
1450-1500
1-3/4”
(44mm)
3/4”
(19mm)
800-526-3694
F3
Electrical Outlet Components
C
A
B
H
E
D
G
F
ELECTRICAL OUTLET COMPONENTS
REF. A
REF. D
CAST ALUMINUM
PILOT LIGHT SWITCH
ELECTRIC OUTLET BOXES
NEON LITE “T” RATED SINGLE POLE
• BRUSHED SATIN FINISH
• FOR 3/4” NPS OR 1/2” NPS
(ADAPTOR PROVIDED)
• GROUND SCREW PROVIDED
• U.L. LISTED #48 C6
FLUSH DUPLEX RECEPTACLE
MODEL NO. R58-1020
SINGLE FACED MODEL
DOUBLE FACED MODEL
3 WIRE “U” GROUND 125 VOLTS
3-1/2”
(89mm)
REF. C
STAINLESS STEEL
3”
(76mm)
MODEL NO. R69-1630 (15 AMPS)
MODEL NO. R69-1631 (20 AMPS)
MODEL NO. R69-1632* (30 AMPS)
STAINLESS STEEL
RECESSED HOUSINGS
CONTROL PANELS
• INTERNAL COVED CORNERS
• PROVIDED WITH (4) 10-24 MOUNTING STUDS
• ACCEPTS STANDARD J-BOX FOR TACK WELDING
• THREE SIZES AVAILABLE
4-5/8”
(117mm)
4”
(102mm)
MODEL NO. R65-3228
REF. E
MODEL NO. R58-1010
REF. B
3/28”
(83mm)
5-1/2”
(140mm)
1”
(25mm)
*SINGLE RECEPTACLE
NOT SHOWN
GROUND FAULT
MODEL NO.
“X” DIM.
“Y” DIM.
R73-2201
5”
(127mm)
6”
(152mm)
R73-2202
8-5/16”
(211mm)
9-5/16”
(236mm)
R73-2203
11-3/4”
(298mm)
12-3/4”
(324mm)
CIRCUIT INTERRUPTER
125 VAC-15 AMPS AT RECEPTACLE
20 AMP FEED THROUGH
MODEL NO. R69-1633
WITH BROWN PLASTIC COVERPLATE.
STAINLESS STEEL COVERPLATE AVAILABLE.
ORDER SEPARATELY AS R71-0722
5-3/4”
(146mm)
6-3/8”
(162mm)
REF. F
1-9/32” R
(232mm)
BLANK PLATE
MODEL NO. R70-0723
3-9/16”
(90mm)
2-5/8”
(66mm)
REF. G
1/2” TYP.
(13mm)
9/32”
(7mm)
MODEL NO. R73-1210
FOR “J” BOX MOUNTING
1-1/2”
(38mm)
X
Y
NOTE: HOLE PATTERNS TO SUIT
ROBERT SHAW CONTROLS AVAILABLE ON REQUEST
STAINLESS STEEL
TOGGLE SWITCH PLATE
MODEL NO. R70-0720
REF. H
STAINLESS STEEL
MODEL NO. R73-1212
DUPLEX RECEPTACLE PLATE
(WITHOUT CUT-OUT)
MODEL NO. R71-0721
FOR CONTROL SWITCH APPLICATION
F4
STAINLESS STEEL
www.componenthardware.com
Tray Slide Components
B
A
C
D
F
E
G
H
TRAY SLIDE COMPONENTS
REF. A
1
11 4 "
STAINLESS STEEL • ROLL FORMED
CONTINUOUS TRAY SLIDE
model NO.
GAUGE
LENGTH
PKG.
j12-1601
16 ga
(1.6mm)
10 ft
(3000mm)
2/CTN
7
38"
4"
• PROVIDED WITH 90º ANGLE FOR EASY INSTALLATION
• CONTINUOUS...PERFECT ALIGNMENT • SATIN POLISHED FINISH
7
8"
TYPICAL
.47
3
14"
3
R 16 "
.47
3
R 16 "
1
R8"
45°
1
28"
90°
NOTE: OTHER LENGTHS AVAILABLE ON APPLICATION WITH QUANTITY ORDERS
TYPICAL
3
8"
45°
COMPONENT
REF. B
REF. C
HEAVY 14 GAUGE
REF. E
STAINLESS STEEL
STAINLESS STEEL BRACKET
END PLATE
MODEL NO. J19-1400
MODEL NO. J12-1402
• ECONOMICAL
• POLISHED TO A #4 SATIN FINISH
• PROVIDED WITH 91° ANGLE TO PREVENT TRAY SLIDE SAG
• PRE-DRILLED MOUNTING HOLES FOR
FAST CONVENIENT INSTALLATION
• IDEAL FOR USE WITH CONTINUOUS TRAY SLIDE
14 ga (1.9mm) POLISHED
STAINLESS STEEL FINISH
1
11 4 "
NICKEL PLATED STEEL
END CAP
FOR 1-5/8” (41mm) O.D. TUBING
MODEL NO. J16-0158
7
38"
4"
7
8"
3
R 16 "
.42
TYPICAL
5/16”
(8mm)
3
R 16 "
1
R8"
.42
1
28"
3
14"
5/8”
(16mm)
1-3/4”
(44mm)
45°
REF. F
4-1/4”
4-1/4”
(108mm)
(108mm)
10-13/16”
(275mm)
90°
5/8”
1-1/16” (16mm)
(27mm)
3
8"
TYPICAL
45°
REF. D
SOLID STAINLESS STEEL
NICKEL PLATED STEEL
1-1/2”
(38mm)
8”
4”
(203mm)
(102mm)
REF. G
REF. H
16 GAUGE (1.5 mm)
stainless steel
FOR 1” (25mm) O.D.
18 ga (1.2mm) TUBING
(WELD APPLICATION)
FOR 1” (25mm)
O.D. TUBING
MODEL NO. J16-0201
5/16”
(8mm)
1” O.D.
(25mm)
END CAP
END CAP
4-1/4”
REF. D
(108mm)
6-1/8”
(156mm)
MODEL NO. J16-0100
STAINLESS STEEL
90° ELBOWS
• 16 ga (1.5mm) • FOR 1” (25mm) & 1-5/8” (41mm)
TUBING DESIGNED FOR RAILS, SUPPORTS, ETC.
COMPONENT
“U” BENDS
B
FOR 1” (25mm) O.D. TUBING
DESIGNED FOR TRAY SLIDE RAILS
MODEL NO. J13-4488*
*CAN BE USED WITH NO.’s
J19-4960 & J19-4955
3 raiL tray slide brackets
A
C
800-526-3694
COMPONENT
model NO.
O.D.
A
B
C
j14-0117
1”
(25mm)
4”
(102mm)
4”
(102mm)
1-1/2”
(38mm)
J14-0119
1-5/8”
(41mm)
10”
(254mm)
10”
(254mm)
4-5/8”
(117mm)
F5
Tray Slide And Shelf Brackets
C
A
B
D
TRAY SLIDE and SHELF BRACKETS
REF. A
REF. C
STAINLESS STEEL
3-RAIL TRAY SLIDE BRACKET
STAINLESS STEEL TRAY SLIDE
BRACKET WITHOUT SADDLES
COMPONENT
LOAD CAPACITY: 200 lbs PER 2 BRACKETS
MODEL NO. J19-4960-LT
1-7/16”
(36mm)
Y
X
Z
LOAD CAPACITY: 150 lbs PER 2 BRACKETS
1-7/16”
(36mm)
3-1/2”
(89mm) 4-1/4”
(108mm)
12-1/2”
(317mm)
SADDLE
3/8”
(10mm)
FOR SUPPORT OF
1” (25mm) O.D. RAILS
MGT. HOLES 3/8” (10mm)
MODEL NO.
“X”
“Y”
“Z”
J19-4960
4” (102mm)
4” (102mm)
4” (102mm)
J19-4962
4” (102mm) 4-1/2” (114mm)
3-1/2”
(89mm)
4-1/4”
(107mm)
MTG. HOLES 1/4” (6mm)
3/8”
(10mm)
4-1/2” (114mm)
REF. B
REF. D
STAINLESS STEEL
FIXED SHELF BRACKET
STAINLESS STEEL
4-RAIL TRAY SLIDE BRACKET
MODEL NO. J19-4966
LOAD CAPACITY: 200 lbs PER 2 BRACKETS
MODEL NO. J19-4964
1”
(25mm)
LOAD CAPACITY: 200 lbs PER 2 BRACKETS
2-1/2”
(63mm)
2-1/2”
(63mm)
3-3/8”
(86mm)
3/4”
(19mm)
1-7/16”
(36mm)
4”
(102mm)
3”
(76mm)
3”
(76mm)
3”
(76mm)
MTG. HOLES 3/16” (5mm) DIA.
1-1/4”
(32mm)
3-1/2”
(89mm)
4-1/4”
(108mm)
3/8”
(10mm)
10-1/2”
(267mm)
4-7/16”
(113mm)
1-7/16”
(37mm)
MTG. HOLES 1/4” (6mm)
ALL BRACKETS SHOWN ARE 8 GAUGE (.170” - 4.5mm ), stainless steel polished to a #4 satin finish
F6
1-1/4”
(32mm)
7/8”
(22mm)
3”
(76mm)
MTG. HOLES
3/8” (10mm)
COMPONENT
www.componenthardware.com
MTG. HOLES
1/4” (6mm)
Fold Down / Removable Shelf Brackets
B
A
B
E
D
C
FOLD DOWN / REMOVABLE SHELF BRACKETS
REF. A
STAINLESS STEEL FOLD DOWN
3-RAIL TRAY SLIDE BRACKET
REF. C
STAINLESS STEEL FOLD DOWN
REMOVABLE SHELF BRACKET
MODEL NO. J19-4955
COMPONENT
LOAD CAPACITY: 150 lbs PER 2 BRACKETS
• SATIN FINISH • HEAVY DUTY
MODEL NO. J19-5000*
1”
(25mm)
*SOLD AS A PAIR, KEYHOLE BASE WITH BRACKET
AND STRAIGHT PIN BASE WITH BRACKET
MATERIAL: STAINLESS STEEL WITH A #4 FINISH
LOAD CAPACITY: 150 lbs PER 2 BRACKETS
2-1/2”
(63mm)
7/16”
(11mm)
1”
(25mm)
7-1/2”
(190mm)
2-1/2”
(63mm)
1-1/2”
(38mm)
3-3/8”
(86mm)
4”
(102mm)
4”
(102mm)
SADDLE
MTG. HOLES
1/4” x 3/8” (6mm x 10mm)
STAINLESS STEEL FOLD DOWN SHELF BRACKET
MODEL NO. J19-4967
REF. D
LOAD CAPACITY: 200 lbs PER 2 BRACKETS
REAR VIEW
8-5/8” (219mm)
2-1/2” (63.5mm) 2-1/2” (63.5mm)
1/4” (6mm)
TO FOLD...
LIFT AND FOLD
TO REMOVE...
LIFT AND FOLD,
SLIDE LEFT
AND REMOVE.
1-1/2”
(38mm)
4-1/8”
(105mm)
FOR SUPPORT OF 1” (25mm) O.D. RAILS
ALSO AVAILABLE WITHOUT SADDLES... ORDER AS J19-4955-LT
MTG. HOLES
1/4” x 3/8”
(6 x 10mm)
3-1/2”
(89mm)
1”
(25mm)
1” (25mm)
1-1/4” (32mm)
1-1/2”
(38mm)
3-3/8”
(86mm)
1/4” (6mm)
11/64” (4.4mm)
7”
(178mm)
1” (25mm)
3/16” (4.8mm)
DIA. HOLE
(3) PLACES
1/16” (1.6mm)
REF. B
7”
(178mm)
HEAVY DUTY
FOLDING
REMOVABLE
SHELF BRACKET
1-3/4”
(45mm)
1/2”
(12mm)
1/4”(6mm) DIA.
MTG. HOLES
• FOLDS DOWN WHEN
NOT IN USE
• SHELVES EASILY
REMOVED
FOR CLEANING
MODEL NO.
2-1/2”
(63.5mm)
6-1/8”
(156mm)
TO FOLD...
SLIDE FORWARD
AND FOLD DOWN
TO REMOVE...
SIMPLY LIFT UP.
7/16”
(11mm)
3-15/16”
(100mm)
MODEL NO. J18-2000
1-1/8”
(29mm)
LOAD CAPACITY: 250 lbs PER 2 BRACKETS
1/4”
(7mm)
DESCRIPTION
CHROME PLATED DIE CAST BRACKET with
14 ga (2mm) ZINC PLATE STEEL MOUNT
J17-4273
CHROME PLATED DIE CAST BRACKET with
300 SERIES STAINLESS STEEL MOUNT
1/4” x 3/8” (6.3mm x 9.5mm) SLOTTED MOUNTING HOLES (3) PLACES
HEAVY DUTY ZINC PLATED STEEL
FOLD DOWN SHELF BRACKET
REF. E
J17-4270
7/64” (2.8mm)
3/16” R (4.8mm)
1-1/8”
(28mm)
3-3/32”
(79mm)
LOAD CAPACITY: 200 lbs PER 2 BRACKETS
800-526-3694
7-1/2”
(190mm)
7/32”
(6mm)
5/16”
(8mm)
2”
(51mm)
1-1/2”
(38mm)
1-3/64”
(28mm)
5-3/26”
(132mm)
3”
(76mm)
F7
Protector And Sneeze Guard Components
B
A
C
E
D
PROTECTOR AND SNEEZE GUARD COMPONENTS
STAINLESS STEEL PROTECTOR ASSEMBLY
WITH FOLD DOWN BRACKETS
STAINLESS STEEL
PROTECTOR ASSEMBLY
REF. A
• STAINLESS STEEL CONSTRUCTION
• FOLD DOWN BRACKET DESIGN
• RIGID SUPPORT POST
• STURDY BASES
REF. C
REF. B
13-1/4”
(336mm)
SPECIFICATIONS:
STOCK SIZE: 14” (357mm) high, 10” (254mm) shelf,
10° slant front
POSTS: SEAMLESS STAINLESS STEEL
BRACKETS: STAINLESS STEEL
DIE FORMED FURNISHED WITH LOCKING FEATURE
TO HOLD BRACKET ASSEMBLY IN CLOSED
POSITION ...NYLON ROLLER AND END CHANNEL
TO ACCEPT WRAPPED GLASS FOR NOMINAL
1/4” (6mm) GLASS
MOUNTING: 5/16” x 2-1/4” (8mm x 57mm) BOLT
FURNISHED FOR FASTENING FROM UNDERSIDE
10-3/8”
(263mm)
5/16”
(8mm)
MODEL NO. J25-2200
MODEL NO. J25-2100
(RIGHT HAND)
10-3/8”
(263mm)
(LEFT HAND)
MODEL NO. J25-2300
(CENTER)
REF. E
REF. D
STAINLESS STEEL
COMPONENT
SNEEZE GUARD
BRACKETS
MODEL NO. J30-4465
INCLUDES PAIR OF BRACKETS...
(1) RIGHT HAND & (1) LEFT HAND with
(2) THUMBSCREWS FOR ADJUSTMENT
5”
(125mm)
SPECIFICATIONS:
52º
SHOE PROVIDED TO ACCEPT
WRAPPED 1/4” (6mm) PLATE GLASS
10-3/8” (263mm)
LG. BRACKETS, 1-- PAIR
5/16”
(8mm)
F8
STAINLESS STEEL
PROTECTOR BRACKETS
MODEL NO. J29-4482
www.componenthardware.com
Glass Clamps, Glass Capping And Channel
G
D
E
F
A
H
C
B
I
GLASS CLAMPS, GLASS CAPPING and CHANNEL
REF. B
REF. A
REF. C
3/16”
(5mm)
7/32”
(6mm)
9/32”
(7mm)
STAINLESS STEEL GLASS CAPPING
• PREVENTS CHIPPING • PROVIDES SECURE FIT
• ATTRACTIVE POLISHED FINISH
REF.
MODEL NO.
STAINLESS
STEEL TYPE
A
B70-1001
300 SERIES
.022 (.6mm)
B
B70-1002
300 SERIES
.022 (.6mm)
C
B70-1003
300 SERIES
.022 (.6mm)
D
B70-1005
400 SERIES
.019 (.5mm)
E
B70-1007
400 SERIES
.019 (.5mm)
F
B70-1008
400 SERIES
.019 (.5mm)
A
*B70-1001-6
300 SERIES
.022 (.6mm)
GAUGE
*6 ft (1.9m) LENGTH.
STOCK LENGTH 12 ft (3.6m) MINIMUM ORDER 144 ft (43.9m)
7/16”
(11mm)
7/16”
(11mm)
7/16”
(11mm)
17/64”
(7mm)
9/32”
(7mm)
REF. D
REF. E
1/4”
(6mm)
5/16”
(8mm)
REF. F
3/8”
(10mm)
3/4”
(19mm)
5/16”
(8mm)
REF. G
3/8”
3/8”
(10mm) (10mm)
EXTRUDED ALUMINUM
DOUBLE CHANNEL
7/8”
(22mm)
TRACK COMPONENT
MODEL NO. B74-0011
STOCK LENGTH 12 ft (3.6m)
REF. H
STAINLESS STEEL
GLASS CLAMP FOR ROUND TUBING
MODEL NO.
B79-1000
MODEL NO.
B79-2000-L
MODEL NO.
B79-2000-R
1/4” GLASS
CLAMP, TOP
1/4” GLASS CLAMP,
BOTTOM LEFT
1/4” GLASS CLAMP,
BOTTOM RIGHT
MODEL NO.
B79-1038
MODEL NO.
B79-2038-L
3/8” GLASS
CLAMP, TOP
3/8” GLASS CLAMP,
BOTTOM LEFT
MODEL NO.
B79-2038-R
3/8” GLASS CLAMP,
BOTTOM RIGHT
3/8”
(10mm)
29/32”
(23mm)
• FIRMLY HOLDS GLASS WITHOUT DRILLING
• UNIQUE LEDGE ON BOTTOM BRACKETS
PROVIDES A POSITIVE STOP TO MAKE
INSTALLATION EASIER
• LIGHT GRAY SILICONE PAD CUSHIONS GLASS,
WHILE PROVIDING MAXIMUM GRIPPING POWER
• SLEEK DESIGN MAXIMIZES VIEWABLE SURFACE
AREA OF GLASS
• 3/8” OFFSET
• FOR USE WITH 1-5/8” TUBING
• IDEAL FOR PARTITIONS, DISPLAYS AND SNEEZE GUARDS
• SATIN FINISH MATCHES COUNTERTOPS AND SUPPORTS
REF. I
BLACK DELRIN
ADAPTER FOR
SQUARE TUBING
APPLICATION
1/4” GLASS ONLY
MODEL NO.
B79-X014
NOTE: MOUNTING SCREW NOT PROVIDED
800-526-3694
F9
Cap Strips And Divider Bars
D
C
F
B
E
A
CAP STRIP AND DIVIDER BAR
• NEW EXTRA WIDE PROFILE FOR EASIER INSTALLATION • ALL STAINLESS STEEL CONSTRUCTION
• ACCEPTS 1/16” (2mm) WALL FLASHING MATERIAL • #4 SATIN FINISH • GRAIN OF FINISH MATCHES WALL LINING
• AVAILABLE IN VARIOUS LENGTHS TO MINIMIZE SCRAP • INDIVIDUALLY PLASTIC SLEEVED FOR PROTECTION OF FINISH
• CAP STRIP HAS HEMMED EDGE FOR SAFETY
REF. B
REF. A
EXTENDED WIDE
STAINLESS STEEL
FOR 1/16” (1.6mm) MATERIAL
SATIN FINISH
6-1/2 ft (2m) LENGTH
DIVIDER BAR
Innovative
Design
CAP STRIP
MODEL NO. J63-1651-78
EXTENDED WIDE
STAINLESS STEEL
NEW
1-1/2”
(38mm)
7/8”
(22mm)
7/8”
(22mm)
2-5/32”
(55mm)
7/16”
(11mm)
FOR 1/16” (1.6mm) MATERIAL
SATIN FINISH
MODEL NO. J64-1651-78
6-1/2 ft (2m) LENGTH
MODEL NO. J63-1651-120
MODEL NO. J64-1651-120
10 ft (3m) LENGTH
10 ft (3m) LENGTH
REF. C
REF. D
STAINLESS STEEL
STAINLESS STEEL
DIVIDER BAR
CAP STRIP
WITH GALVANIZED BACK PLATE
FOR 1/16” (1.6mm) MATERIAL
BRIGHT FINISH
FOR 1/16” (1.6mm) MATERIAL
BRIGHT FINISH
MODEL NO. J63-1451
MODEL NO. J64-1450
7 ft (2.1m) LENGTH
7/8”
(22mm)
MODEL NO. J63-1451-8*
8 ft (2.4m) LENGTH
MODEL NO. J63-1451-9*
9 ft (2.7m) LENGTH
5/16”
(8mm)
1/2”
(13mm)
1-3/8”
(35mm)
7/32”
(6mm)
* AVAILABLE ON APPLICATION AND
12 PIECE MINIMUM FOR 8, 9 & 10 ft LENGTHS
REF. E
REF. F
.065
(1.65mm)
EXTENDED WIDE
304 STAINLESS STEEL
EXTENDED WIDE
304 STAINLESS STEEL
CAP STRIP
10 ft (3m) LENGTH
.88
(22.3mm)
.20 (5mm)
HEM EDGE
2.14”
(54.3mm)
DIVIDER BAR
WITH S/S BACK PLATE
FOR 1/16” (1.6mm) MATERIAL
SATIN FINISH
1.50
(38mm)
MODEL NO. J63-2651-84
7 ft (2.1m) LENGTH
MODEL NO. J64-1450-9*
10 ft (3m) LENGTH
* AVAILABLE ON APPLICATION AND
12 PIECE MINIMUM FOR 8,9 & 10 ft LENGTHS
MODEL NO. J63-2651-120
8 ft (2.4m) LENGTH
MODEL NO. J64-1450-10*
10 ft (3m) LENGTH
FOR 1/16” (1.6mm) MATERIAL
SATIN FINISH
7 ft (2.1m) LENGTH
MODEL NO. J64-1450-8*
9 ft (2.7m) LENGTH
MODEL NO. J63-1451-10*
F10
WITH S/S BACK PLATE
MODEL NO. J64-2651-84
.87
(22mm)
7 ft (2.1m) LENGTH
.065
(1.65mm)
www.componenthardware.com
MODEL NO. J64-2651-120
10 ft (3m) LENGTH
Mouldings And Dividers
I
F
E
H
G
E
MOULDINGS AND DIVIDERS
REF. E
REF. H
• GALVANIZED STEEL BACK PLATE
• STAINLESS STEEL SNAP-ON COVER
• SATIN FINISH
STAINLESS STEEL
INSIDE CORNER
SNAP-ON MOULDING
STAINLESS STEEL
FLAT SNAP-ON MOULDING
MODEL NO.
WIDTH
J60-2220
1/2” (13mm)
J60-2240
3/4” (19mm)
J60-2260
1” (25mm)
J60-2270
J60-2320
MODEL NO. J62-2480
3/4”
(19mm)
INSIDE RADIUS
12 FT (3.6m) LENGTH
*NON-STOCK ITEM minimum order 300 pieces
3/4”
(19mm)
1-1/4” (32mm)
2” (51mm)
12 ft (3.6m) LENGTHS
REF. F
REF. I
STAINLESS STEEL
STAINLESS STEEL
OUTSIDE CORNER
SNAP-ON MOULDING
LINE UP
DIVIDER
MODEL NO. J65-4110
1/2”
(13mm)
1/2” (13mm) FACE
12 ft (3.6m) LENGTH
STOCK LENGTH 12 ft (3.6m)
“A”
MODEL NO.
“A”
J61-2470
3/4”x 3/4” (19mm x 19mm)
1/2”
(13mm)
12 ft (3.6m) LENGTHS
“A”
REF. G
3/32”
(2mm)
STAINLESS STEEL
SPLIT TUBE MOULDING
20 ga (1mm) • 2B FINISH
MODEL NO. J62-0012
3/8”
(.375mm)
DIA.
12 ft (3.6m) LENGTH, IDEAL FOR HEMMING/EDGING
MINIMUM ORDER 12 PIECES
800-526-3694
F11
Pot Rack Components
B
C
A
A
D
F
E
POT RACK COMPONENTS
REF. A
STAINLESS STEEL
COMPONENT
POT RACK BAND
COMPONENT
• STAINLESS STEEL
• POLISHED (180 GRIT)
• PAPER INTERLEAVED
• AVAILABLE IN TWO STOCK SIZES
REF. B
REF. C
STAINLESS STEEL
STAINLESS STEEL
ZINC PLATED STEEL
SLIDING
POT RACK HOOK
COMPONENT
SLIDING POT RACK HOOKS
DOUBLE PRONG
SINGLE PRONG
3-1/4”
(82mm)
MODEL NO. J95-2250
1/4”
(6mm)
3-3/4”
(95mm)
1/4”
(6mm)
1/4” (6mm) x 2” (51mm) x 10 FT. (3000mm)
200 ft /CTN., (60 meters),
TWENTY 10 ft (3000mm) LGTHS.
3-3/4”
(95mm)
MODEL NO. J95-2187
15/64”
(.6mm)
3/16” (4.7mm) x 2” (51mm) x 10 FT. (3000mm)
200 ft/CTN., (60 meters),
TWENTY 10 ft (3000mm) LGTHS.
5-3/8”
(136mm)
15/64”
(.6mm)
MODEL NO. J79-4115
REF. D
REF. E
STAINLESS STEEL
COMPONENT
STAINLESS STEEL...MODEL NO. J77-4401
ZINC PLATED STEEL... MODEL NO. J77-4420
REF. F
STAINLESS STEEL
SUPPORT
COLLAR
COMPONENT
FOR 1-5/8” (41mm) O.D. TUBING
2”
(50mm)
TUBULAR
COLLAR
COMPONENT
FOR 1-5/8” (41mm) O.D. TUBING
16 GAUGE (1.5mm)
STAINLESS STEEL
90° ELBOW
FOR 1-5/8” (41mm) O.D. TUBING
2”
(51mm)
10”
(254mm)
1-7/8”
(44mm)
1-7/8”
(47mm)
10”
(254mm)
2-3/8”
(60mm)
MODEL NO. A16-0206-C
F12
MODEL NO. A24-0206-C
www.componenthardware.com
MODEL NO. J14-0119
4-5/8”
(117mm)
Tubing Accessories
D
C
B
E
F
A
G
TUBING ACCESSORIES
REF. A
REF. C
CHROME PLATED
STAINLESS STEEL
TUBULAR SHELF
SUPPORT
FOR 1” (25mm) O.D. TUBING
• DIE CAST METAL • CHROME PLATED
FOR 1-5/8” (41mm) O.D. TUBING
MODEL NO. J53-0125
• LONG LENGTH • ADJUSTABLE
• DOUBLE SET SCREW LOCKING
• PLATED INSIDE LINER
• SUITABLE FOR A WIDE ARRAY
OF CUSTOM APPLICATIONS
MODEL NO. A24-0207-C
5-1/4” (133mm) LG.
REF. D
STAINLESS STEEL
ROUND BASE FLANGE
1”
(25mm)
2”
(51mm)
FOR 1” (25mm) O.D. TUBING... MODEL NO. J52-0014
FOR 1-1/4” (32mm) O.D. TUBING... MODEL NO. J52-1250
1”
(25mm)
FOR WELDED 1-1/4”
1”
(25mm) APPLICATION (32mm)
• STAINLESS STEEL
REF. E
2”
(50mm)
1-3/4”
(44mm)
OBLONG BASE END FLANGE
COMPONENT
1-1/4”
(32mm)
1-1/2”
(38mm)
1-1/4”
(32mm)
1-3/4”
(44mm)
PLATED STEEL
KNURLED BUSHING
• PERMITS POSITIVE CONCEALED FASTENING
FOR 1” (25mm) O.D. TUBING
MODEL NO. J58-0100
REF. B
16 GAUGE ONLY
EXPANDING FASTENERS
• FOR FAST KD INSTALLATION
• FOR ROUND OR SQUARE TUBING
REF. F
PLATED STEEL
KNURLED BUSHING
• PERMITS POSITIVE CONCEALED FASTENING
FOR 1-1/4” (32mm) O.D. TUBING... MODEL NO. J58-0014*
FOR 1-5/8” (41mm) O.D. TUBING... MODEL NO. J58-0158*
MODEL NO.
TUBING SIZE
J57-7100
1”(25mm)
J57-7125
1-1/4”(32mm)
J57-7150
1-1/2”(38mm)
ESCUTCHEON PLATE FLANGE
J57-7158
1-5/8”(41mm)
• 12 ga (2.6mm) STAINLESS STEEL W/ #4 SATIN FINISH
• FOR 1-5/8” (40mm) O.D. TUBING
NOTE: J57-7100 USES 5/16” BOLT.
ALL OTHERS USE 1/2” BOLTS.
FURNISHED WITH 1/4-20 TH’D
*16 GAUGE ONLY
REF. G
STAINLESS STEEL
WITH (3) 1/4” (6mm) DIA. HOLES... MODEL NO. J54-1583*
WITHOUT HOLES ... MODEL NO. J54-1580
800-526-3694
FURNISHED WITH 5/16-18 TH’D
3-1/2” DIA.
(89mm)
*2-9/16”
(66mm)
F13
Cup Dispensers And Accessories
CUP DISPENSER AND ACCESSORIES
STAINLESS STEEL CUP DISPENSERS
COMPONENT
• ALL STAINLESS STEEL CONSTRUCTION - SATIN FINISH, 24 GAUGE (.6mm) • TOP LOADING WITH SPRING TENSION
• LOW PROFILE ... ONLY 9/32” (7mm) PROTRUSION ABOVE COUNTERTOP • REMOVABLE ... 1/4 TURN RELEASES
DISPENSER FROM COUNTERTOP • GASKETED COUNTER SEAL • WAX AND FOAM CUP MODEL
STAINLESS STEEL COUNTER MOUNT CUP DISPENSERS
MODEL NO.
TYPE
CUP SIZE
CUP RIM
DIA. (ADJ.)
COUNTER
HOLE DIA.
REQ’D
OUTER
FLANGE
DIA.
O.A.
LENGTH
C3200CV
VERTICAL
MOUNT
6 to 12 oz
(180 to 360ml)
2-7/32” to 3-3/16”
(56 to 81mm)
4-3/16”
(110mm)
5-3/8”
(135mm)
24”
(610mm)
C3200CH
HORIZONTAL
MOUNT
6 to 12 oz
(180 to 360ml)
2-7/32” to 3-3/16”
(56 to 81mm)
4-3/16”
(110mm)
5-3/8”
(135mm)
24”
(610mm)
C3200CF
FOAM CUP
6 to 12 oz
(180 to 360ml)
2-7/32” to 3-3/16”
(56 to 81mm)
4-3/16”
(110mm)
5-3/8”
(135mm)
24”
(610mm)
C3400CV
VERTICAL
MOUNT
12 to 24 oz
(360 to 720ml)
2-1/2” to 3-7/8”
(63 to 98mm)
4-11/16”
(120mm)
5-7/8”
(150mm)
24”
(610mm)
C3400CH
HORIZONTAL
MOUNT
12 to 24 oz
(360 to 720ml)
2-1/2” to 3-7/8”
(63 to 98mm)
4-11/16”
(120mm)
5-7/8”
(150mm)
24”
(610mm)
C3400CF
FOAM CUP
12 to 24 oz
(360 to 720ml)
2-1/2” to 3-7/8”
(63 to 98mm)
4-11/16”
(120mm)
5-7/8”
(150mm)
24”
(610mm)
C3500CV
VERTICAL
MOUNT
32 to 46 oz
(960 to 1380ml)
4” to 4-7/8”
(102 to 124mm)
5-11/16”
(145mm)
6-3/4”
(170mm)
24”
(610mm)
C3500CH
HORIZONTAL
MOUNT
32 to 46 oz
(960 to 1380ml)
4” to 4-7/8”
(102 to 124mm)
5-11/16”
(145mm)
6-3/4”
(170mm)
24”
(610mm)
C3500CF
FOAM CUP
32 to 46 oz
(960 to 1380ml)
4” to 4-7/8”
(102 to 124mm)
5-11/16”
(145mm)
6-3/4”
(170mm)
24”
(610mm)
NOTE: VERTICAL MOUNT CUP DISPENSERS OPERABLE TO 45°
ACCESSORIES AVAILABLE FROM STOCK:
• LID DISPENSERS: STAND OR WALL MOUNT FOR EASY LOADING
• WALL MOUNT OR STAND MOUNT CUP DISPENSERS...TOP LOADING, GRAVITY FEED
• CUP DISPENSER STANDS
F14
www.componenthardware.com
PATENTED ADJUSTABLE THROAT
LETS YOU ADAPT THE UNIVERSAL
COLLAR TO ANY DISPENSING NEED
All it takes is a simple screwdriver adjustment,
which keeps it locked in for any one type of
cup until you want to change to another size.
Drip Plate
A
C
B
DRIP PLATE
REF. A
“A”
REF. C
REF. B
“A”
3-1/2”
(89mm)
3-3/4”
(95mm)
BRASS NICKEL PLATED
FINISHING RINGS
MODEL NO.
J86-4300
FOR 7/8” (22mm) DIA. HOLE
MODEL NO.
J86-4301
FOR 1” (25mm) DIA. HOLE
STAINLESS STEEL
DRIP PLATE
STAINLESS STEEL
DRIP PLATE
NON-SPLASH
ECONOMY TYPE
• HEAVY DUTY DESIGN
• 21 ga (.8mm) WITH #4 FINISH
• ECONOMY DESIGN
• 24 ga (.6mm) WITH #4 FINISH
NON-SPLASH
STAINLESS STEEL DRIP PLATE
ECONOMY TYPE
STAINLESS STEEL DRIP PLATE
MODEL NO
“A”
LENGTH
J81-5206-6-C
6” (152mm)
72” (1829mm)
J81-5207-6-C
7” (178mm)
72” (1829mm)
J81-5209-6-C
9” (229mm)
72” (1829mm)
MODEL NO.
“A”
LENGTH
J80-5107-6-C
7” (178mm)
72” (1829mm)
J80-5109-6-C
9” (229mm)
72” (1829mm)
PACKAGED 5 PCS. PER BOX
PACKAGED 5 PCS. PER BOX
800-526-3694
F15
End Caps And Lid Cover Brackets
A
B
D
C
F
F
E
END CAPS AND LID COVER BRACKETS
REF. A
REF. B
REF. C
NICKEL PLATED
END CAPS
FOR ROUND TUBING
THERMOPLASTIC
THERMOPLASTIC
FOR ROUND TUBING
FOR SQUARE TUBING
END CAPS
END CAPS
MATERIAL: BLACK NYLON
MATERIAL: BLACK NYLON
O.D.
GAUGE
J16-1000-SQ
1” x 1”
(25 x 25mm)
18 (1.2mm)
16 (1.5mm)
J16-1001-SQ
1” x 1”
(25 x 25mm)
16 (1.5mm)
1-1/2” (38mm)
16 (1.5mm)
1-5/8” (41mm)
16 (1.5mm)
J16-1250-SQ
1-1/4” x 1-1/4” 18 (1.2mm)
(32 x 32mm)
J16-1500-SQ
1-1/2” x 1-1/2” 16 (1.5mm)
(38 x 38mm)
O.D.
GAUGE
J16-1000-RD
1” (25mm)
18 (1.2mm)
J16-1250-RD
1-1/4” (32mm)
18 (1.2mm)
J16-2125-RD
1-1/4” (32mm)
J16-1500-RD
J16-1625-RD
MODEL NO.
J16-0158
FOR 1” (25mm)
O.D. TUBING
FOR 1-5/8” (41mm)
O.D. TUBING
REF. D
MODEL NO.
MODEL NO.
MODEL NO.
J16-0201
SOLID STAINLESS
END CAPS
MODEL NO.
J16-0100
18 ga (1mm)
FOR 1” (25mm) O.D. TUBING
(WELD APPLICATION)
REF. E
NICKEL PLATED AND SOLID
STAINLESS SCREENED
HOLE PLUGS
MODEL NO. J16-0201-SP
NOTE: * INDICATES OUTSIDE DIMENSIONS
FOR 1” (25mm) DIA. HOLE
MODEL NO. J16-0201-SPSS
FOR 1” (25mm) DIA. HOLE
MODEL NO. J16-0158-SPSS
FOR 1-5/8” (41mm) DIA. HOLE
REF. F
STAINLESS STEEL
LID COVER
BRACKET ASSEMBLY
• EASY INSTALLATION
• LIFT-OFF DESIGN
CAN BE FASTENED TO STAINLESS
STEEL LIDS OR PLASTIC BUBBLE
COVERS. DESIGNED FOR EASY
LIFT-OFF AND FOR HOLD-OPEN
POSITION FOR EASE OF SERVING.
MODEL NO. J33-1532
PIVOT SCREW
1/8”
(3mm)
2-5/16”
(59mm)
1/4”
(6mm)
1-1/2”
(38mm)
5/16”
(8mm)
5/8”
(16mm)
PIVOT PIN
FOR STAINLESS STEEL PIVOT PINS...ORDER MODEL NO. J32-X001
FOR STAINLESS STEEL PIVOT SCREWS...ORDER MODEL NO. J32-X002
www.componenthardware.com
1-7/8”
(47mm)
7/16”
(11mm)
HEX
5/8”
(16mm)
ASSEMBLY CONSISTS OF RIGHT &
LEFT HAND BRACKETS COMPLETE
WITH 4 PIVOT PINS WITH SCREW.
F16
8-32 HEX
HEAD SCREW
1/4” (6mm)
DIA. HOLE
Sink / Table / Bar Accessories
B
A
C
D
F
E
PLATED CAST IRON
BOTTLE OPENER
MODEL NO. T80-0485
SINK / TABLE / BAR ACCESSORIES
REF. B
REF. A
6-5/8”
(170mm) DIA.
SOLID RUBBER
SCRAP BLOCK
SOLID RUBBER
COMPONENT
FITS STANDARD 5-3/4” (146mm)
DIA. OPENING
MODEL NO. J92-5000
5-3/4”
(146mm) DIA.
REF. D
STAINLESS STEEL
SCRAP CHUTE
FITS STANDARD 6” (152mm)
DIA. OPENING
MODEL NO. J92-1000
7”
(178mm) DIA.
5-1/4”
(133mm)
3”
(76mm)
FITS STANDARD 5-3/4” (146mm)
DIA. OPENING
5-3/4”
(146mm) DIA.
REF. C
COMPONENT
SCRAP BLOCK
FUNNEL SHAPED
2-7/8”
(73mm)
MODEL NO. J92-9360
8-3/4”
(225mm) DIA.
1/4”
(6mm)
7-1/16”
(179mm)
STAINLESS STEEL
COMPONENT
DIPPERWELL ASSEMBLY
• Fits into 6”(152mm) Dia. opening
• Type 18-8 stainless steel
inner and outer shell
• 9-1/2”(241mm) overall length
• Complete with stainless steel drain
and 1-1/2”(38mm) O.D. x 4”(102mm)
long brass nickel plated tailpiece
COMPONENT
MODEL NO. K30-1000
WITHOUT FAUCET
MODEL NO. K30-1010
WITH FAUCET
6-3/4”
(171mm)
6-9/16”
(167mm)
3/8”
(10mm)
MODEL NO. K22-3100
FAUCET ONLY
1-5/8”
(41mm)
Also available as individual components
1/2” NPS male inlet furnished with 1/4” NPT
male union tailpiece and mounting hardware
REF. E AND F
COMPONENT
64 oz ICE SCOOP WITH HAND GUARD
AND SANIGUARD® ANTIMICROBIAL
PRODUCT PROTECTION
5”
(127mm)
3-1/4”
(82mm)
2-1/4”
(57mm)
MODEL NO. SIS-6400
wire frame wall mount bracket
Model no. sis-1000
• molded hand guard helps prevent accidental contact of hand and
ice, reducing the potential transfer of germs to the ice
• ideal for use in oem ice bins or as a replacement ice scoop
• may also be used as a dry measure scoop
• hole in hand guard to permit use of a chain
• 64 oz capacity • patent pending
• wire frame wall mount bracket available
• saniguard® antimicrobial PRODUCT PROTECTION helps to retard the
growth of bacteria, mold AND mildew THAT CAN CAUSE
ODORS, STAINING AND PRODUCT DETERIORATION
NOTE: THE SANIGUARD® ANTIMICROBIAL TREATMENT IS DESIGNED TO PROTECT THE
PRODUCT ITSELF AND WILL NOT PROTECT USERS OR OTHERS FROM FOOD-BORNE OR
DISEASE CAUSING MICROORGANISMS. CONTINUE TO FOLLOW GOOD HAND HYGIENE
AND CLEANING PRACTICES.
800-526-3694
14”
(356mm)
13-1/8”
(333mm)
9-3/8”
(238mm)
7”
(178mm)
F17
Corner Inserts
COUNTER AND SINK INSERTS
STAINLESS STEEL
COVE CORNER INSERT
14 ga (1.8mm)
MODEL NO. J70-4701
FOR NOMINAL 1-1/2” (38mm) ROLLS
WITH 1” (25mm) INSIDE RADIUS
3-3/8”
(87mm)
3”
(76mm)
1” R
(25mm)
STAINLESS STEEL
COVE CORNER INSERT
14 ga (1.8mm)
1-1/2” (38mm)
ROLL WITH
FULL 80º
RETURN
1-1/2”
(38mm)
ROLL WITH
FULL 220º
RETURN
1” R
(25mm)
MODEL NO. J70-4691
FOR NOMINAL 1-1/2” (38mm) ROLLS
WITH 1” (25mm) INSIDE RADIUS
4”
(102mm)
3-7/8”
(98mm)
STAINLESS STEEL
SPHERICAL R 1.00
SPHERICAL R .75
BULL NOSE INSERT
1.50
90.00°
1.25
14 ga (1.8mm)
MODEL NO. J72-4711
1.25
REF.073
1.5” (38mm) ROLL, 3/4” SPHERICAL RADIUS, .073 GAUGE
REF.073
MODEL NO. J72-4731
QUARTER SPHERES FOR NOMINAL
1-1/2” (38mm) AND 2” (51mm)
2.00
2” (51mm) ROLL, 1” SPHERICAL RADIUS, .073 GAUGE
90.00°
REF.75
.25
STAINLESS STEEL
STAINLESS STEEL
TRIANGULAR INSERT
14 ga (1.8mm)
MODEL NO. J70-4801
B
1” R
(25mm)
COVE
SQUARE CORNER INSERT
14 ga (1.8mm)
MODEL NO. J74-4721
FULL SPHERICAL R 1.00
A
1” R
(25mm)
ROLL
1-1/2” (38mm) COVE,
A=2-1/4” (57mm),
B=2-5/16” (59mm)
MODEL NO. J74-4723
COVE
1-3/4” (44mm) COVE,
A=2-7/8” (73mm),
B=2-11/16” (66mm)
MODEL NO. J74-4725
90.00°
F18
1-5/8” (41mm) COVE,
A=2-9/16” (65mm),
B=2-1/2” (63mm)
R1.00
www.componenthardware.com
Brite Gard™ Cleaning Products
Brite Gard™
STAINLESS STEEL
CLEANER/PROTECTANT
Biodegradable
100% Recyclable
• Cleans, Shines & Protects
• Does not leave oily residue
• Environmentally Friendly – Uses Manual
Pump Sprayer, Not Aerosols
• Virtually Eliminates Fingerprints & Smudges
• Specifically Formulated For Use On
Indoor/Outdoor Stainless Steel Appliances
• SAFE – USES FOOD GRADE INGREDIENTS
Model No.
Q85-2004 (shown)
Model No.
Q85-2128
Model No.
Q85-2004
Model No.
Q85-2016
Description
Wt. Per
Bottle
Box/Case
Qty
Pump Spray
4 fl. oz. (118ml)
Each
Q85-200424
Pump Spray
4 fl. oz. (118ml)
24/Box
Q85-2016 (shown)
Pump Spray
16 fl. oz. (474ml)
Each
Q85-201606
Pump Spray
16 fl. oz. (474ml)
6/Box
Q85-201612
Pump Spray
16 fl. oz. (474ml)
12/Case
Model No.
Description
Wt. Per
Refill
Box Qty
Q85-2128 (shown)
Refill
1 gal. (3.8ml)
Each
Q85-212804
Refill
1 gal. (3.8ml)
4/Box
Brite Gard®
ALL PURPOSE WIPERS
• Made with 25% Recycled Cellulose Fibers
• Perfect for Heavy Duty Wet/Dry Wiping Applications
• Ideal for Most Metal Working and Messy Fluid Applications
• Interfolds are Perfect for Jobs that Require Large WIPERs
• Two Times Stronger than the Competition
• COST EFFECTIVE ALTERNATIVE TO CLOTH TOWELS & RAGS
• Low Lint
CHG
®
Model No.
Q85-7000
Q85-7500
Model No.
Q85-8000
Q85-8500
Heavy-Weight Quarterfold
(60 count)
Model No. Q85-7000
Sheet Size:
12-1/2” x 13”
(138mm x330mm)
Light-Weight Quarterfold
(90 count)
Model No. Q85-7500
Sheet Size:
12-1/2” x 13”
(138mm x 330mm)
Wipers Contain
25%
Recycled Fibers
Super Strength Interfold
(126 count)
Model No. Q85-8000
Sheet Size:
9-1/2” x 16-1/2”
(241mm x419mm)
Light-Weight Interfold
(135 count)
Model No. Q85-8500
Sheet Size:
9-1/2” x 16-1/2”
(241mm x419mm)
Sheet Per Case:
720
Sheet Per Case:
1080
Sheet Per Case:
1008
Sheet Per Case:
1080
Case Quantity:
12
Case Quantity:
12
Case Quantity:
8
Case Quantity:
8
Case Weight:
15lbs (7kg)
Case Weight:
15lbs (7kg)
Case Weight:
800-526-3694
18lbs (8kg)
Case Weight:
20lbs (9kg)
F19
Conveyor Roller Components and Wheels
A
C
B
F
D
E
CONVEYOR ROLLER COMPONENTS AND WHEELS
REF. A
.63”
(16mm)
REF. C
PLASTIC CONVEYOR ROLLER BEARINGS
STAINLESS STEEL WHEEL
• STOCKED FOR 1.90” (48mm) O.D. TUBING*
• MOLDED POLYPROPYLENE
• DOUBLE LABYRINTH SEALS
• STAINLESS STEEL (18-8) BALLS
• ACCOMMODATES ARRAY OF SHAFTS
• APPROVED FOR FOODSERVICE USE
• MAY BE STEAM CLEANED
• OPERATES AT TEMPERATURES UP TO 150°F (66° C)
MODEL NO.
SHAFT SIZE**
IR-1105
5/16” (8mm) DIA.
IR-1106
3/8” (10mm) DIA.
IR-1108
1/2” (13mm) DIA.
IR-1115
5/16” (8mm) HEX
IR-1117*
7/16” (11mm) HEX
MODEL NO. IR-1061
1.94”
(49mm)
ZINC PLATED STEEL
with OFFSET BUSHING
MODEL NO. IR-2112
1/4”
(6mm)
.81”
(21mm)
REF. D
STAINLESS STEEL and STEEL WHEELS
• IDEAL FOR DRAWER SLIDES
AND CONVEYOR ASSEMBLIES
• HEAT TREATED INNER
AND OUTER RACEWAYS
• ALL METAL CONSTRUCTION
.62”
(16mm)
1/4” ID
(6mm)
1.94”
(49mm)
STAINLESS STEEL WHEEL
MODEL NO. IR-0031
STEEL WHEEL ZINC PLATED
MODEL NO. IR-2263
.81”
(21mm)
REF. E
*3/4 (19mm) O.D., 1/8” (3mm), AND 1-9/16” (39mm)
O.D. ROLLER BEARINGS
ARE AVAILABLE ON APPLICATION BASIS
MOLDED PLASTIC WHEEL
** ADAPTER BUSHINGS ARE PROVIDED FOR SHAFTS LISTED. BEARINGS
MUST BE ORDERED WITH BUSHINGS. IF NONE IS SPECIFIED
BUSHINGS FOR 7/16” (11mm) HEX ROD WILL BE SUPPLIED.
*NO BUSHING REQUIRED.
REF. B
1/4”
(6mm)
• STAINLESS STEEL BALLS
• DOUBLE ROW BALL BEARINGS
• 1/4” (6mm) I.D. PLATED STEEL BUSHING
• ANTI-CONTAMINATION SHIELDS
• QUIET, NON-MARKING ACTION
1.9”
(48mm)
MODEL NO. IR-2191
PVC ROUND TUBING (GRAY)
MATERIAL: ACETAL AND NYLON
FOR CONVEYOR ROLLERS
• 1.90” (48mm) O.D. FOR 1100 SERIES ROLLERS
REF. F
MODEL NO. IR-1190
.63”
(16mm)
.94”
(24mm)
STAINLESS STEEL 7/16” (11mm) HEX ROD
4 ft (1220mm) LENGTH
NOTE: STAINLESS STEEL, ALUMINUM, GALVANIZED STEEL TUBING
IS AVAILABLE IN 1.90” (48mm) O.D. X 20 ft (7300mm, 6m)
LENGTHS ON AN APPLICATION BASIS.
F20
.59”
(15mm)
www.componenthardware.com
FOR CONVEYOR ROLLERS
MODEL NO. B80-0716
6 ft (1830mm) LENGTH
NOTE: OTHER SIZES ON APPLICATION
Roller Assemblies And Components
ROLLER ASSEMBLIES and COMPONENTS
MADE TO ORDER
STAINLESS STEEL
CONVEYOR
COMPONENTS
COMPLETE ROLLER
ASSEMBLIES
STAINLESS STEEL
COMPLETE ROLLER ASSEMBLIES (TUBING AND SERIES
1100 PLASTIC ROLLER BEARINGS) ARE AVAILABLE
FABRICATED TO INDIVIDUAL REQUIREMENTS.
CONVEYOR BEARING
FLANGED BALL BEARING WHEEL ASSEMBLY
FOR 1-5/8” (41mm) O.D. 16 ga (1.5mm) tubing
THESE COMPLETE ASSEMBLIES PERMIT INDIVIDUAL
SPECIFICATIONS OF TUBING DIAMETER AND MATERIAL,
SHAFT MATERIAL, SHAFT SIZE AND A VARIETY OF
MOUNTINGS. THE VARIABLES INCLUDE...
model no. b29-0080
STAINLESS STEEL
TUBING DIAMETERS
.78, 1.18, 1.90
HEX AXLE ROD
7/16” (11mm) SOLID HEX AXLE ROD
AVAILABLE IN 6 ft (1.9m) LENGTHS
(20mm, 28mm, 39mm, 48mm)
MODEL NO. B80-0716
TUBING MATERIALS
PLASTIC (PVC), ALUMINUM AND STAINLESS STEEL
SHAFT MATERIALS
CARBON STEEL, ALUMINUM AND STAINLESS STEEL
SHAFT SIZES
FROM .192”, .250” OR .312” DIA. AND 5/16” OR 7/16” HEX
(5mm, 6mm, 8mm)
(8mm or 11mm)
MOUNTINGS
PLAIN, THREADED, TAPPED AND SPRING LOADED
NOTE: WE WELCOME YOUR INQUIRIES FOR SPECIFIC DESIGNS TO
SATISFY YOUR INDIVIDUAL REQUIREMENTS. HOWEVER, NOT ALL
COMBINATIONS ARE POSSIBLE. PLEASE CONTACT OUR SALES
OFFICE FOR ASSISTANCE IN DESIGNING YOUR CUSTOM ROLLER
ASSEMBLIES. ALLOW 4-6 WEEKS FOR DELIVERY OF COMPLETE
ROLLER ASSEMBLIES.
TUBING NOT FURNISHED
800-526-3694
F21
Gas Burners
B
D
A
C
E
F
GAS BURNERS
DIA.
DIA.
MUSHROOM
BURNERS
REMOVABLE
HEAD BURNERS
FURNISHED COMPLETE
WITH AIR MIXING
CHAMBER AND ORIFICE
3-1/2”
(89mm)
REF.
MODEL NO.
DIA.
BTU/HR
REC. FOR
REF.
MODEL NO.
DIA.
BTU/HR
REC. FOR
A
G22-4310
3” (76mm)
5,000
1-3 gal
(3.8-11 lit)
C
G24-4000
4” (102mm)
12,000
5-8 gal
(19-30 lit)
B
G22-4320
4” (102mm)
7,000
3-4 gal
(11-15 lit)
D
G24-5000
5” (127mm)
20,000
8-16 gal
(30-60 lit)
NOTE: ORDER AIR MIXING PLATE SEPARATELY AS G44-4360
NOTE: ORDER AIR MIXING PLATE SEPARATELY AS G44-4360
REF. E
REF. F
LOOP BURNER
SADDLE BURNER
• END INLET • 30,000 BTU/HR
• RAPID HEATING • 7” (178mm) DIA. • 30,000 BTU/HR
7”
(178mm)
7”
(178mm)
3-1/4”
(83mm)
15”
(381mm)
17”
(432mm)
MODEL NO. G27-1250
FURNISHED COMPLETE WITH AIR MIXING CHAMBER
AND ORIFICE FOR NATURAL AND LP GAS
F22
MODEL NO. G26-4200
FURNISHED COMPLETE WITH AIR MIXING CHAMBER AND ORIFICE
www.componenthardware.com
Ring Burner Assemblies
A
B
RING BURNER ASSEMBLIES
REF. A
REF. B
RING BURNER
RING BURNER
WITH INSULATED
HANDLE BURNER VALVE
MODEL NO. G12-6550
WITH ADJUSTABLE SLIP FIT ORIFICE
BURNER VALVE
MODEL NO. G10-6550
RATING: 22,000 BTU/HR
RATING: 22,000 BTU/HR
1-1/4”
(32mm)
6-1/2”
(165mm)
6-1/2”
(165mm)
1-1/2”
(38mm)
5-1/2”
(140mm)
1-1/4”
(32mm)
5-1/2”
(140mm)
1-1/2”
(38mm)
1-7/8”
(48mm)
15/16”
(24mm)
1-1/2”
(38mm)
NOTE: MANIFOLD AND NIPPLE (3/4” N.P.T.) NOT SUPPLIED
NOTE: MANIFOLD AND NIPPLE (3/4” N.P.T.) NOT SUPPLIED
6” RING BURNER ONLY MODEL NO. G12-X001
800-526-3694
F23
Gas Burner Components
K
L
M
F
J
A
E
D
G
C
H
I
B
GAS BURNER COMPONENTS
REF. A
REF. B
ADJUSTABLE PILOT LIGHT ASSEMBLIES
MODEL NO. G20-6511 12” (305mm) LG
MODEL NO. G20-6512 18” (457mm) LG
(SPECIAL LENGTHS TO ORDER)
FOR USE WITH ALL BURNERS AND SIMILAR EQUIPMENT
AS WELL AS JET AND RING BURNER ASSEMBLIES
REF. C
BURNER VALVE EXTENSION
AIR MIXING CHAMBER
FREE FLOW CHAMBER WITH AIR MIXING PLATE
MODEL NO. G46-4360 FOR 1/8” N.P.T. ORIFICE
MODEL NO. G46-4361 FOR SLIP FIT ORIFICE
REF. D
AIR MIXING PLATE
ZINC PLATED
MODEL NO. G44-4360
• FITS STANDARD SLOTTED “D” BURNER VALVES
• 3” (76mm) MAXIMUM ADJUSTMENT
MODEL NO. G48-0005
REF. E
BURNER VALVES
SPECIAL SIZES MAY BE SUPPLIED IN QUANTITY
REF. G
WITH BRASS HANDLE
MODEL NO. G40-6451
• 1/8” N.P.T. MALE INLET x 3/8” N.P.T. FEMALE
COMPRESSION FIT FOR 5/16”(8mm) O.D. TUBING
REF. F
BURNER VALVE
• 1/8” N.P.T. MALE INLET
MODEL NO. G38-5330
MODEL NO. G40-6452
ADJUSTABLE SLIP FIT ORIFICE
REF. H
VALVE HANDLE
• BLACK THERMOPLASTIC
• FOR ALL STANDARD VALVES WITHOUT INDICATOR
MODEL NO. G50-5420
REF. J
JET BURNER, BRASS
REF. I
MODEL NO. G36-4370
THIS PART IS SUPPLIED WITH AN .021 (.5mm) DIAMETER GUIDE, HOLE, DIFFERENT
GASSES, FEEDING PRESSURES AND ATMOSPHERIC PRESSURES, REQUIRE DIFFERENT
ORIFICE DIAMETERS. CONSULT YOUR UTILITY SUPPLIER FOR CORRECT DIAMETER.
REF. K
F24
ELBOW, BRASS
COUPLING, BRASS
1/8” N.P.T. FEMALE INLET FOR 5/16” (8mm) O.D. TUBING
MODEL NO. G28-6491
REF. L
THREADED ORIFICE
MODEL NO. G32-6470
REF. M
PILOT VALVE, BRASS
1/8” N.P.T. FOR USE WITH G28-6491
ADJUSTABLE
MODEL NO. G30-6480
1/8” N.P.T. MALE INLET FOR 1/4” (6mm) O.D. TUBING
MODEL NO. G34-6460
www.componenthardware.com
All photographs and illustrations are considered to be a representation of the actual item. In some cases there may be slight variations.
This catalog, copy, part numbers and unique method of illustrating products is copyrighted by Component Hardware Group, Inc. All rights reserved.
No portion of this catalog may be reproduced in any form or by any means in whole or in part, without the written consent of Component Hardware.
Component Hardware reserves the right to make any and all changes and to discontinue any of its products without notice.
Not responsible for typographical errors.
© copyright 2015 Component Hardware Group, Inc.
#CAT-X026 05/15 PRINTED IN U.S.A.
®
1890 Swarthmore Avenue • PO Box 2020 • Lakewood • NJ 08701
Tel. 800-526-3694 • 732-363-4700 • Fax 732-364-8110
www.componenthardware.com
